Skip to content

M
meta-elphel393
Commit 00c2b108 authored by Oleg Dzhimiev's avatar Oleg Dzhimiev
Browse files
Options

cd out when init done

parent 71a4f651
Show whitespace changes
Inline Side-by-side
Showing with 6 additions and 2 deletions
recipes-core/init-elphel393/files/init_elphel393.sh
View file @ 00c2b108
...@@ -9,10 +9,12 @@ IMGSRV_PORT=2323 ...@@ -9,10 +9,12 @@ IMGSRV_PORT=2323
# camogm command pipe name # camogm command pipe name
CAMOGM_PIPE=/var/volatile/camogm_cmd CAMOGM_PIPE=/var/volatile/camogm_cmd
# enable SATA, set this to 1 if camera is equipped with SSD drive # enable SATA, set this to 1 if camera is equipped with SSD drive
SATA_EN=0 SATA_EN=1
ifconfig eth0 192.168.0.9 ifconfig eth0 192.168.0.9
cd /usr/local/verilog/ cd /usr/local/verilog/
if [ $SENSOR_TYPE -eq 5 ]; then if [ $SENSOR_TYPE -eq 5 ]; then
/usr/local/bin/test_mcntrl.py @startup5 >> /dev/null 2>&1 & /usr/local/bin/test_mcntrl.py @startup5 >> /dev/null 2>&1 &
ln -sf /usr/local/verilog/x393_parallel.bit /usr/local/verilog/x393.bit ln -sf /usr/local/verilog/x393_parallel.bit /usr/local/verilog/x393.bit
...@@ -72,6 +74,8 @@ echo file jpeghead.c -pfl > /sys/kernel/debug/dynamic_debug/control ...@@ -72,6 +74,8 @@ echo file jpeghead.c -pfl > /sys/kernel/debug/dynamic_debug/control
/usr/local/bin/test_mcntrl.py @includes -c compressor_control all 3 None None None None None /usr/local/bin/test_mcntrl.py @includes -c compressor_control all 3 None None None None None
cd ~
if [ -f /usr/bin/imgsrv ]; then if [ -f /usr/bin/imgsrv ]; then
imgsrv -p $IMGSRV_PORT & imgsrv -p $IMGSRV_PORT &
fi fi
...@@ -83,5 +87,5 @@ if [ $SATA_EN -eq 1 ]; then ...@@ -83,5 +87,5 @@ if [ $SATA_EN -eq 1 ]; then
/usr/local/bin/x393sata.py /usr/local/bin/x393sata.py
modprobe ahci_elphel & modprobe ahci_elphel &
sleep 2 sleep 2
echo 1 > /sys//devices/soc0/amba@0/80000000.elphel-ahci/load_module echo 1 > /sys/devices/soc0/amba@0/80000000.elphel-ahci/load_module
fi fi
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment