diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index dccb111..1e5276b 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -57,6 +57,16 @@ config COMMON_CLK_SCPI
 	  This driver uses SCPI Message Protocol to interact with the
 	  firmware providing all the clock controls.
 
+config COMMON_CLK_SI5338
+	tristate "Support Silicon Laboratories SI5338 Quad Clock Generator"
+	depends on I2C
+	select REGMAP_I2C
+	select RATIONAL
+	help
+	 Say Y here if you have a SI5338 Quad Clock Generator IC on the I2C bus.
+	 To compile this driver as a module, choose M here: the
+	 module will be called si5338.
+
 config COMMON_CLK_SI5351
 	tristate "Clock driver for SiLabs 5351A/B/C"
 	depends on I2C
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 0760449..1231275 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -38,6 +38,7 @@ obj-$(CONFIG_CLK_QORIQ)			+= clk-qoriq.o
 obj-$(CONFIG_COMMON_CLK_RK808)		+= clk-rk808.o
 obj-$(CONFIG_COMMON_CLK_S2MPS11)	+= clk-s2mps11.o
 obj-$(CONFIG_COMMON_CLK_SCPI)           += clk-scpi.o
+obj-$(CONFIG_COMMON_CLK_SI5338)		+= clk-si5338.o
 obj-$(CONFIG_COMMON_CLK_SI5351)		+= clk-si5351.o
 obj-$(CONFIG_COMMON_CLK_SI514)		+= clk-si514.o
 obj-$(CONFIG_COMMON_CLK_SI570)		+= clk-si570.o
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 247b09b..fb7e25e 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -796,6 +796,23 @@ config XILINX_VCU
        help
           Driver for the Xilinx VCU Init based on the logicoreIP.
 
+config VSC330X
+	tristate "Support VSC330X crosspoint switch"
+	help
+	  Say Y here if you have a VSC30X crosspoint switch IC on the I2C bus.
+	  To compile this driver as a module, choose M here: the
+	  module will be called vsc330x.
+
+config LTC3589
+	tristate "Support LTC3589 voltage regulator"
+	help
+	  Say Y here if you have a LTC3589 voltage regulator IC on the I2C bus.
+	  To compile this driver as a module, choose M here: the
+	  module will be called ltc3589.
+	  Developed by Elphel, Inc..
+	  The default driver is found at drivers/regulator/ltc3589.c and
+	  enabled with CONFIG_REGULATOR_LTC3589=y
+
 source "drivers/misc/jesd204b/Kconfig"
 source "drivers/misc/c2port/Kconfig"
 source "drivers/misc/eeprom/Kconfig"
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index e0bb6e0..e72c313 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -57,6 +57,8 @@ obj-$(CONFIG_ECHO)		+= echo/
 obj-$(CONFIG_VEXPRESS_SYSCFG)	+= vexpress-syscfg.o
 obj-$(CONFIG_CXL_BASE)		+= cxl/
 obj-$(CONFIG_PANEL)             += panel.o
+obj-$(CONFIG_VSC330X)	        += vsc330x.o
+obj-$(CONFIG_LTC3589)	        += ltc3589.o
 
 lkdtm-$(CONFIG_LKDTM)		+= lkdtm_core.o
 lkdtm-$(CONFIG_LKDTM)		+= lkdtm_bugs.o