debugging with applications

src/drivers/elphel/Makefile

@@ -33,3 +33,4 @@ obj-$(CONFIG_ELPHEL393)           += imu_log393.o
 obj-$(CONFIG_ELPHEL393)           += cxi2c.o
 obj-$(CONFIG_ELPHEL393)           += x393_videomem.o
 obj-$(CONFIG_ELPHEL393)           += detect_sensors.o
+obj-$(CONFIG_ELPHEL393)           += x393_fpga_functions.o
\ No newline at end of file

src/drivers/elphel/sensor_common.c

@@ -957,7 +957,7 @@ int image_acq_init(struct platform_device *pdev)
 
 #endif
 
-	dev_dbg(dev, "Elphel FPGA interrupts initialized\n");
+	dev_info(dev, "Elphel FPGA interrupts initialized\n");
 	dev_dbg(dev, "reset all compressors\n");
 	for (i = 0; i < SENSOR_PORTS; i++) {
 		reset_compressor(i);
@@ -969,7 +969,7 @@ int image_acq_init(struct platform_device *pdev)
 	//init_pgm_proc ();   // setup pointers to functions (not sensor-specific)
 	//MDD1(printk("reset_qtables()\n"));
 
-	framepars_init(pdev);
+//	framepars_init(pdev);
 
 	return 0;
 }

src/drivers/elphel/x393_fpga_functions.c

@@ -14,11 +14,62 @@
 *  You should have received a copy of the GNU General Public License
 *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *******************************************************************************/
+
+
+#include <linux/spinlock.h>
+#include <uapi/elphel/c313a.h> // PARS_FRAMES_MASK
+
 #include "x393.h"
 #include "x393_fpga_functions.h"
 
+#define REPEAT_STATUS_READ         10 ///< Number of times status is re-read waiting for a new timestamp
 
+static DEFINE_SPINLOCK(fpga_time_lock);
+
+// Nothing to init? Started in pgm_detectsesnor through sensor_common:sequencer_stop_run_reset
+#if 0
 int init_command_sequencer(int sensor_port)
 {
     return 0;
 }
+#endif
+/** Read time (seconds and microseconds) from the FPGA RTC */
+sec_usec_t * get_fpga_rtc(sec_usec_t * ts) ///< Pointer to a sec/usec structure to fill in
+                                           ///< @return structure link to a passed structure
+{
+//    sec_usec_t  ts = {.sec=0, .usec=0};
+    x393_rtc_status_t  stat;
+    x393_status_ctrl_t stat_ctrl={.d32=0};
+//    x393_rtc_usec_t    usec;
+//    x393_rtc_sec_t     sec;
+    int i;
+    if (!ts) return NULL;
+    spin_lock(&fpga_time_lock);
+    stat = x393_rtc_status();
+    stat_ctrl.mode = 1;
+    stat_ctrl.seq_num = stat.seq_num + 1;
+    set_x393_rtc_set_status(stat_ctrl);  // Requests single status, latches current time
+    for (i = 0; i < REPEAT_STATUS_READ; i++) {
+        stat = x393_rtc_status();
+        if (stat.seq_num == stat_ctrl.seq_num) {
+            ts->sec = x393_rtc_status_sec().sec;
+            ts->usec = x393_rtc_status_usec().usec;
+            break;
+        }
+    }
+    spin_unlock(&fpga_time_lock);
+    return ts;
+}
+
+/** Set FPGA RTC to specified time */
+void set_fpga_rtc (sec_usec_t ts) ///< timestamp providing seconds and microseconds
+{
+    x393_rtc_usec_t    usec;
+    x393_rtc_sec_t     sec;
+    usec.usec = ts.usec;
+    sec.sec =   ts.sec;
+    spin_lock(&fpga_time_lock);
+    set_x393_rtc_usec(usec);
+    set_x393_rtc_sec_set(sec);  // And apply
+    spin_unlock(&fpga_time_lock);
+}

src/drivers/elphel/x393_fpga_functions.h

@@ -16,4 +16,7 @@
 *******************************************************************************/
 //typedef enum {DIRECT,ABSOLUTE,RELATIVE} x393cmd_t;
 #include "x393.h"
-void fpga_table_write_nice (int addr, int len, unsigned long * data);
+//void        fpga_table_write_nice (int addr, int len, unsigned long * data);
+sec_usec_t * get_fpga_rtc(sec_usec_t * ts);
+void         set_fpga_rtc (sec_usec_t ts);
+

src/include/uapi/elphel/c313a.h

@@ -208,7 +208,7 @@
  */
 // parameter indexes will be updated to group-related ones into the same groups of 32
 // NOTE: P_* and G_* should not end with numbers - numbers will be used in PHP constants to add to the constant value (ELPHEL_AAA3 will be treated as ELPHEL_AAA+3)
-//#define P_NUMBER         1024   //number of registers (was 64) - NOTE: obsolete?
+#define P_NUMBER         1024   //number of registers (was 64) - NOTE: obsolete?
 #define P_SENSOR            1   /**< if set to 0 - will (re)detect sensor, if set to None - won't bother <ul>
 <li>                        4  - ZR32112MLC - now there is no way to see color/mono
 <li>                        5  - ZR32112PLC
@@ -1694,6 +1694,12 @@ struct sensorproc_t {
 
 //#define EXPOSURE_UNIT 100 // to move to finer exposure settings - current unit in microseconds. TODO: Propagate it to drivers...
 #define EXPOSURE_UNIT 1 ///< to move to finer exposure settings - current unit in microseconds. TODO: Propagate it to drivers...
+
+typedef struct{
+    unsigned long usec;
+    unsigned long sec;
+}  sec_usec_t;
+
 /// width,height, quality are still needed even with new Exif - it is used to rebuild JPEG header
 
 // most parameters are moved out, but width, height, quality are needed for JPEG header, so currently the following are used:

src/include/uapi/elphel/x393_devices.h

@@ -37,10 +37,10 @@
 #define DEV393_EXIF_META2     ("exif_meta2",        "exif_elphel",   125, 34, "0666", "c")  ///< sensor port 2: write metadata, concurrently opened files. All writes are atomic
 #define DEV393_EXIF_META3     ("exif_meta3",        "exif_elphel",   125, 35, "0666", "c")  ///< sensor port 3: write metadata, concurrently opened files. All writes are atomic
 
-#define DEV393_FRAMEPARS0     ("frameparsall0","framepars_operations",125,80, "0666", "c")  ///< Access frame parameters for channel 0 (schedule modification, read with mmap)
-#define DEV393_FRAMEPARS1     ("frameparsall1","framepars_operations",125,81, "0666", "c")  ///< Access frame parameters for channel 1 (schedule modification, read with mmap)
-#define DEV393_FRAMEPARS2     ("frameparsall2","framepars_operations",125,82, "0666", "c")  ///< Access frame parameters for channel 2 (schedule modification, read with mmap)
-#define DEV393_FRAMEPARS3     ("frameparsall3","framepars_operations",125,83, "0666", "c")  ///< Access frame parameters for channel 3 (schedule modification, read with mmap)
+#define DEV393_FRAMEPARS0     ("frameparsall0","framepars_operations",130,80, "0666", "c")  ///< Access frame parameters for channel 0 (schedule modification, read with mmap)
+#define DEV393_FRAMEPARS1     ("frameparsall1","framepars_operations",130,81, "0666", "c")  ///< Access frame parameters for channel 1 (schedule modification, read with mmap)
+#define DEV393_FRAMEPARS2     ("frameparsall2","framepars_operations",130,82, "0666", "c")  ///< Access frame parameters for channel 2 (schedule modification, read with mmap)
+#define DEV393_FRAMEPARS3     ("frameparsall3","framepars_operations",130,83, "0666", "c")  ///< Access frame parameters for channel 3 (schedule modification, read with mmap)
 
 #define DEV393_JTAG_RESET     ("fpgaresetjtag",     "x393_jtag",     132,  0, "0666", "c")  ///< Just close open files (same as jtagraw)
 #define DEV393_JTAG_RAW       ("jtagraw",           "x393_jtag",     132,  0, "0666", "c")  ///< Just close open files (same as jtagraw)