Skip to content

L
linux-elphel
Commit 9f42f3da authored by Andrey Filippov's avatar Andrey Filippov
Browse files
Options

debugging with applications

parent 11bcb946
Hide whitespace changes
Inline Side-by-side
Showing with 150 additions and 68 deletions
src/drivers/elphel/Makefile
View file @ 9f42f3da
......@@ -32,4 +32,5 @@ obj-$(CONFIG_ELPHEL393) += imu_log393.o
obj-$(CONFIG_ELPHEL393) += cxi2c.o
obj-$(CONFIG_ELPHEL393) += x393_videomem.o
obj-$(CONFIG_ELPHEL393) += detect_sensors.o
\ No newline at end of file
obj-$(CONFIG_ELPHEL393) += detect_sensors.o
obj-$(CONFIG_ELPHEL393) += x393_fpga_functions.o
\ No newline at end of file
src/drivers/elphel/framepars.c
View file @ 9f42f3da
......@@ -55,7 +55,7 @@
//#include "cc3x3.h"
//#include "x3x3.h" // hardware definitions
#include "x393_fpga_functions.h"
#include "sensor_common.h"
#include "framepars.h"
#include "param_depend.h" // specifies what functions should be called for different parameters changed
......@@ -169,6 +169,9 @@ struct sensorproc_t * sensorproc = NULL;
#endif
/** @brief Global pointer to basic device structure. This pointer is used in debugfs output functions */
static struct device *g_devfp_ptr;
//wait_queue_head_t framepars_wait_queue; // used to wait for the frame to be acquired
/**
......@@ -879,7 +882,7 @@ int setFramePar(int sensor_port, struct framepars_t * this_framepars, unsigned l
struct framepars_t *framepars = aframepars[sensor_port];
unsigned long *funcs2call =afuncs2call[sensor_port];
MDF8(printk(": thisFrameNumber=0x%lx frame8=%d index= %d (0x%lx), val=0x%lx\n", thisFrameNumber(sensor_port), frame8, index, mindex, val));
dev_dbg(g_devfp_ptr, ": thisFrameNumber=0x%lx frame8=%d index= %d (0x%lx), val=0x%lx\n", thisFrameNumber(sensor_port), frame8, index, mindex, val);
D1I(local_irq_save(flags));
// if (index > P_MAX_PAR) {
if (index > ((index >= FRAMEPAR_GLOBALS) ? (P_MAX_GPAR + FRAMEPAR_GLOBALS) : P_MAX_PAR)) {
......@@ -911,7 +914,7 @@ int setFramePar(int sensor_port, struct framepars_t * this_framepars, unsigned l
if (mindex & FRAMEPAIR_FORCE_PROC) {
framepars[frame8].functions |= funcs2call[index]; //Mark which functions will be needed to process the parameters
}
MDF8(printk(" bindex=0x%lx, bmask=0x%08lx, bmask32=0x%08lx, functions=0x%08lx\n", bindex, bmask, bmask32, framepars[frame8].functions));
dev_dbg(g_devfp_ptr, " bindex=0x%lx, bmask=0x%08lx, bmask32=0x%08lx, functions=0x%08lx\n", bindex, bmask, bmask32, framepars[frame8].functions);
// Write parameter to the next frames up to the one that have the same parameter already modified
if ((mindex & FRAMEPAIR_JUST_THIS) == 0) {
MDF8(printk(": --- setting next frames"));
......@@ -936,7 +939,7 @@ int setFramePar(int sensor_port, struct framepars_t * this_framepars, unsigned l
}
} else { // error - trying to write "just this" to the "future" - that would stick if allowed
D1I(local_irq_restore(flags));
ELP_KERR(printk("Tried to write JUST_THIS parameter (0x%lx) too far in the future", mindex));
dev_err(g_devfp_ptr, "Tried to write JUST_THIS parameter (0x%lx) too far in the future", mindex);
return -ERR_FRAMEPARS_TOOEARLY;
}
D1I(local_irq_restore(flags));
......@@ -964,17 +967,17 @@ int setFramePars(int sensor_port, struct framepars_t * this_framepars, int numPa
struct framepars_t *framepars = aframepars[sensor_port];
unsigned long *funcs2call =afuncs2call[sensor_port];
MDF8(printk(": this_framepars=0x%x numPars=%d\n", (int)this_framepars, numPars));
dev_dbg(g_devfp_ptr, ": this_framepars=0x%x numPars=%d\n", (int)this_framepars, numPars);
D1I(local_irq_save(flags));
for (npar = 0; npar < numPars; npar++) {
frame8 = (this_framepars->pars[P_FRAME]) & PARS_FRAMES_MASK;
val = pars[npar].val;
index = pars[npar].num & 0xffff;
MDF8(printk(": --- frame8=%d index=%d (0x%x) val=0x%x\n", frame8, index, (int)pars[npar].num, (int)val));
dev_dbg(g_devfp_ptr, ": --- frame8=%d index=%d (0x%x) val=0x%x\n", frame8, index, (int)pars[npar].num, (int)val);
// remark: code below looks similar to setFramePar function, call it instead
if (index > ((index >= FRAMEPAR_GLOBALS) ? (P_MAX_GPAR + FRAMEPAR_GLOBALS) : P_MAX_PAR)) {
D1I(local_irq_restore(flags));
ELP_KERR(printk(" bad index=%d > %d\n", index, P_MAX_PAR));
dev_err(g_devfp_ptr, " bad index=%d > %d\n", index, P_MAX_PAR);
return -ERR_FRAMEPARS_BADINDEX;
}
if (index >= FRAMEPAR_GLOBALS) { // ignore frame logic, set "static" parameters to frame 0
......@@ -1021,7 +1024,7 @@ int setFramePars(int sensor_port, struct framepars_t * this_framepars, int numPa
}
} else { // error - trying to write "just this" to the "future" - that would stick if allowed
D1I(local_irq_restore(flags));
ELP_KERR(printk("Tried to write JUST_THIS parameter (0x%lx) too far in the future", pars[npar].num));
dev_err(g_devfp_ptr, "Tried to write JUST_THIS parameter (0x%lx) too far in the future", pars[npar].num);
return -ERR_FRAMEPARS_TOOEARLY;
}
}
......@@ -1124,8 +1127,10 @@ loff_t framepars_lseek(struct file * file, loff_t offset, int orig)
unsigned long target_frame;
struct framepars_pd * privData = (struct framepars_pd*) file -> private_data;
int sensor_port = privData -> minor - DEV393_MINOR(DEV393_FRAMEPARS0);
sec_usec_t sec_usec;
// struct framepars_t *framepars = aframepars[sensor_port];
MDF1(printk(" offset=0x%x, orig=0x%x, sensor_port = %d\n", (int)offset, (int)orig, sensor_port));
dev_dbg(g_devfp_ptr, "(framepars_lseek) offset=0x%x, orig=0x%x, sensor_port = %d\n", (int)offset, (int)orig, sensor_port);
switch (orig) {
case SEEK_SET:
file->f_pos = offset;
......@@ -1155,48 +1160,55 @@ loff_t framepars_lseek(struct file * file, loff_t offset, int orig)
switch (offset) {
case LSEEK_GET_FPGA_TIME:
//X313_GET_FPGA_TIME( GLOBALPARS(G_SECONDS), GLOBALPARS(G_MICROSECONDS) );
MDF2(printk("X313_GET_FPGA_TIME\n"));
get_fpga_rtc(&sec_usec);
GLOBALPARS(sensor_port,G_SECONDS) = sec_usec.sec;
GLOBALPARS(sensor_port,G_MICROSECONDS) = sec_usec.usec;
dev_dbg(g_devfp_ptr, "LSEEK_GET_FPGA_TIME: sec=%ld, usec=%ld\n", sec_usec.sec, sec_usec.usec);
break;
case LSEEK_SET_FPGA_TIME: // better to use write, not lseek to set FPGA time
//X313_SET_FPGA_TIME( GLOBALPARS(G_SECONDS) , GLOBALPARS(G_MICROSECONDS) );
MDF2(printk("X313_SET_FPGA_TIME\n"));
sec_usec.sec = GLOBALPARS(sensor_port,G_SECONDS);
sec_usec.usec = GLOBALPARS(sensor_port,G_MICROSECONDS);
set_fpga_rtc(sec_usec);
dev_dbg(g_devfp_ptr, "LSEEK_SET_FPGA_TIME: sec=%ld, usec=%ld\n", sec_usec.sec, sec_usec.usec);
break;
case LSEEK_FRAMEPARS_INIT: // reset hardware sequencers, init framepars structure
MDF2(printk("LSEEK_FRAMEPARS_INIT\n"));
dev_dbg(g_devfp_ptr, "LSEEK_FRAMEPARS_INIT\n");
initGlobalPars(sensor_port); // reset all global parameters but the first 32
initSequencers(sensor_port);
break;
case LSEEK_FRAME_RESET: // reset absolute frame number to avoid integer frame number overflow
MDF2(printk("LSEEK_FRAME_RESET\n"));
dev_dbg(g_devfp_ptr, "LSEEK_FRAME_RESET\n");
resetFrameNumber(sensor_port);
break;
case LSEEK_SENSORPROC: // process modified parameters in frame 0 (to start sensor detection)
MDF2(printk("LSEEK_SENSORPROC: framepars[0].functions=0x%08lx\n", framepars[0].functions));
dev_dbg(g_devfp_ptr, "LSEEK_SENSORPROC: aframepars[%d][0].functions=0x%08lx\n",
sensor_port, aframepars[sensor_port][0].functions);
processPars(sensor_port, sensorproc, 0, 8); //frame0, all 8 frames (maxAhead==8)
break;
case LSEEK_DMA_INIT: // initialize ETRAX DMA (normally done in sensor_common.c at driver init
MDF2(printk("LSEEK_DMA_INIT\n"));
dev_dbg(g_devfp_ptr, "LSEEK_DMA_INIT\n");
//x313_dma_init();
break;
case LSEEK_DMA_STOP: // stop DMA
MDF2(printk("LSEEK_DMA_STOP\n"));
dev_dbg(g_devfp_ptr, "LSEEK_DMA_STOP\n");
//x313_dma_stop(); //
break;
case LSEEK_DMA_START: // start DMA
MDF2(printk("LSEEK_DMA_START\n"));
dev_dbg(g_devfp_ptr, "LSEEK_DMA_START\n");
//x313_dma_start(); //
break;
case LSEEK_COMPRESSOR_RESET: // reset compressor and buffer pointers
MDF2(printk("LSEEK_COMPRESSOR_RESET\n"));
dev_dbg(g_devfp_ptr, "LSEEK_COMPRESSOR_RESET\n");
//reset_compressor();
break;
case LSEEK_INTERRUPT_OFF: // disable camera interrupts
MDF2(printk("LSEEK_INTERRUPT_OFF\n"));
dev_dbg(g_devfp_ptr, "LSEEK_INTERRUPT_OFF\n");
// compressor_interrupts(0,sensor_port);
sensor_interrupts(0,sensor_port);
break;
case LSEEK_INTERRUPT_ON: // enable camera interrupts
// MDF2(printk("LSEEK_INTERRUPT_ON\n"));
dev_dbg(g_devfp_ptr, "LSEEK_INTERRUPT_ON\n");
sensor_interrupts(1,sensor_port);
break;
}
......@@ -1231,8 +1243,9 @@ ssize_t framepars_write(struct file * file, const char * buf, size_t count, loff
int first = 0;
int last;
int result;
MDF1(printk(": file->f_pos=0x%x, *off=0x%x, count=0x%x\n", (int)file->f_pos, (int)*off, (int)count));
sec_usec_t sec_usec;
// MDF1(printk(": file->f_pos=0x%x, *off=0x%x, count=0x%x\n", (int)file->f_pos, (int)*off, (int)count));
dev_dbg(g_devfp_ptr, ": file->f_pos=0x%x, *off=0x%x, count=0x%x\n", (int)file->f_pos, (int)*off, (int)count);
count &= ~7; // sizeof (struct frameparspair_t)==8
switch (privData->minor) {
case DEV393_MINOR(DEV393_FRAMEPARS0):
......@@ -1261,10 +1274,16 @@ ssize_t framepars_write(struct file * file, const char * buf, size_t count, loff
latency = (pars[first].val & 0x80000000) ? -1 : pars[first].val;
break;
case FRAMEPARS_SETFPGATIME: //ignore value (should be already set in G_SECONDS, G_MICROSECONDS frame0)
//X313_SET_FPGA_TIME( GLOBALPARS(G_SECONDS) , GLOBALPARS(G_MICROSECONDS) );
//X313_SET_FPGA_TIME( GLOBALPARS(G_SECONDS) , GLOBALPARS(G_MICROSECONDS) );
sec_usec.sec = GLOBALPARS(sensor_port,G_SECONDS);
sec_usec.usec = GLOBALPARS(sensor_port,G_MICROSECONDS);
set_fpga_rtc(sec_usec);
break;
case FRAMEPARS_GETFPGATIME: //ignore value, set frame 0 G_SECONDS, G_MICROSECONDS to FPGA registers
//X313_GET_FPGA_TIME( GLOBALPARS(G_SECONDS) , GLOBALPARS(G_MICROSECONDS) );
get_fpga_rtc(&sec_usec);
GLOBALPARS(sensor_port,G_SECONDS) = sec_usec.sec;
GLOBALPARS(sensor_port,G_MICROSECONDS) = sec_usec.usec;
break;
default:
printk("framepars_write: invalid special instruction: 0x%x\n", (int)pars[first].num);
......@@ -1274,7 +1293,7 @@ ssize_t framepars_write(struct file * file, const char * buf, size_t count, loff
last = first + 1;
while ((last < count) && ((pars[last].num & 0xff00) != 0xff00)) last++; // skip to the end or next special instructions
result = setFrameParsAtomic(sensor_port,frame, latency, last - first, &pars[first]);
MDF1(printk("setFrameParsAtomic(%ld, %d, %d)\n", frame, latency, last - first));
dev_dbg(g_devfp_ptr, "setFrameParsAtomic(%ld, %d, %d)\n", frame, latency, last - first);
if (result < 0) {
if (count > sizeof(pars_static)) kfree(pars);
return -EFAULT;
......@@ -1304,18 +1323,18 @@ int framepars_mmap(struct file *file, struct vm_area_struct *vma)
MDF1(printk(": minor=0x%x\n", privData->minor));
switch (privData->minor) {
case DEV393_MINOR(DEV393_FRAMEPARS0):
case DEV393_MINOR(DEV393_FRAMEPARS1):
case DEV393_MINOR(DEV393_FRAMEPARS2):
case DEV393_MINOR(DEV393_FRAMEPARS3):
result = remap_pfn_range(vma,
vma->vm_start,
((unsigned long)virt_to_phys(&aframeparsall[sensor_port])) >> PAGE_SHIFT, // Should be page-aligned
vma->vm_end - vma->vm_start,
vma->vm_page_prot);
MDF1(printk("remap_pfn_range returned=%x\r\n", result));
if (result) return -EAGAIN;
return 0;
case DEV393_MINOR(DEV393_FRAMEPARS0):
case DEV393_MINOR(DEV393_FRAMEPARS1):
case DEV393_MINOR(DEV393_FRAMEPARS2):
case DEV393_MINOR(DEV393_FRAMEPARS3):
result = remap_pfn_range(vma,
vma->vm_start,
((unsigned long)virt_to_phys(&aframeparsall[sensor_port])) >> PAGE_SHIFT, // Should be page-aligned
vma->vm_end - vma->vm_start,
vma->vm_page_prot);
dev_dbg(g_devfp_ptr, "remap_pfn_range returned=%x\n", result);
if (result) return -EAGAIN;
return 0;
default: return -EINVAL;
}
}
......@@ -1340,13 +1359,15 @@ int framepars_init(struct platform_device *pdev)
frameParsInitialized = 0;
res = register_chrdev(DEV393_MAJOR(DEV393_FRAMEPARS0), DEV393_NAME(DEV393_FRAMEPARS0), &framepars_fops);
if (res < 0) {
printk(KERN_ERR "\nframepars_init: couldn't get a major number %d.\n", DEV393_MAJOR(DEV393_FRAMEPARS0));
dev_err(dev, "framepars_init: couldn't get a major number %d (DEV393_MAJOR(DEV393_FRAMEPARS0)).\n",
DEV393_MAJOR(DEV393_FRAMEPARS0));
return res;
}
for (sensor_port = 0; sensor_port < SENSOR_PORTS; sensor_port++) {
init_waitqueue_head(&aframepars_wait_queue[sensor_port]);
}
dev_info(dev, "registered MAJOR: %d\n", DEV393_MAJOR(DEV393_FRAMEPARS0));
dev_info(dev, DEV393_NAME(DEV393_FRAMEPARS0)": registered MAJOR: %d\n", DEV393_MAJOR(DEV393_FRAMEPARS0));
g_devfp_ptr = dev;
return 0;
}
......@@ -1358,24 +1379,24 @@ int framepars_remove(struct platform_device *pdev)
return 0;
}
//static const struct of_device_id elphel393_framepars_of_match[] = {
// { .compatible = "elphel,elphel393-framepars-1.00" },
// { /* end of list */ }
//};
//MODULE_DEVICE_TABLE(of, elphel393_framepars_of_match);
//
//static struct platform_driver elphel393_framepars = {
// .probe = framepars_init,
// .remove = framepars_remove,
// .driver = {
// .name = DEV393_NAME(DEV393_FRAMEPARS0),
// .of_match_table = elphel393_framepars_of_match,
// },
//};
//
//module_platform_driver(elphel393_framepars);
//
//MODULE_LICENSE("GPL");
//MODULE_AUTHOR("Andrey Filippov <andrey@elphel.com>.");
//MODULE_DESCRIPTION(FRAMEPARS_DRIVER_DESCRIPTION);
//
static const struct of_device_id elphel393_framepars_of_match[] = {
{ .compatible = "elphel,elphel393-framepars-1.00" },
{ /* end of list */ }
};
MODULE_DEVICE_TABLE(of, elphel393_framepars_of_match);
static struct platform_driver elphel393_framepars = {
.probe = framepars_init,
.remove = framepars_remove,
.driver = {
.name = DEV393_NAME(DEV393_FRAMEPARS0),
.of_match_table = elphel393_framepars_of_match,
},
};
module_platform_driver(elphel393_framepars);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Andrey Filippov <andrey@elphel.com>.");
MODULE_DESCRIPTION(FRAMEPARS_DRIVER_DESCRIPTION);
src/drivers/elphel/sensor_common.c
View file @ 9f42f3da
......@@ -957,7 +957,7 @@ int image_acq_init(struct platform_device *pdev)
#endif
dev_dbg(dev, "Elphel FPGA interrupts initialized\n");
dev_info(dev, "Elphel FPGA interrupts initialized\n");
dev_dbg(dev, "reset all compressors\n");
for (i = 0; i < SENSOR_PORTS; i++) {
reset_compressor(i);
......@@ -969,7 +969,7 @@ int image_acq_init(struct platform_device *pdev)
//init_pgm_proc (); // setup pointers to functions (not sensor-specific)
//MDD1(printk("reset_qtables()\n"));
framepars_init(pdev);
// framepars_init(pdev);
return 0;
}
......
src/drivers/elphel/x393_fpga_functions.c
View file @ 9f42f3da
......@@ -14,11 +14,62 @@
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*******************************************************************************/
#include <linux/spinlock.h>
#include <uapi/elphel/c313a.h> // PARS_FRAMES_MASK
#include "x393.h"
#include "x393_fpga_functions.h"
#define REPEAT_STATUS_READ 10 ///< Number of times status is re-read waiting for a new timestamp
static DEFINE_SPINLOCK(fpga_time_lock);
// Nothing to init? Started in pgm_detectsesnor through sensor_common:sequencer_stop_run_reset
#if 0
int init_command_sequencer(int sensor_port)
{
return 0;
}
#endif
/** Read time (seconds and microseconds) from the FPGA RTC */
sec_usec_t * get_fpga_rtc(sec_usec_t * ts) ///< Pointer to a sec/usec structure to fill in
///< @return structure link to a passed structure
{
// sec_usec_t ts = {.sec=0, .usec=0};
x393_rtc_status_t stat;
x393_status_ctrl_t stat_ctrl={.d32=0};
// x393_rtc_usec_t usec;
// x393_rtc_sec_t sec;
int i;
if (!ts) return NULL;
spin_lock(&fpga_time_lock);
stat = x393_rtc_status();
stat_ctrl.mode = 1;
stat_ctrl.seq_num = stat.seq_num + 1;
set_x393_rtc_set_status(stat_ctrl); // Requests single status, latches current time
for (i = 0; i < REPEAT_STATUS_READ; i++) {
stat = x393_rtc_status();
if (stat.seq_num == stat_ctrl.seq_num) {
ts->sec = x393_rtc_status_sec().sec;
ts->usec = x393_rtc_status_usec().usec;
break;
}
}
spin_unlock(&fpga_time_lock);
return ts;
}
/** Set FPGA RTC to specified time */
void set_fpga_rtc (sec_usec_t ts) ///< timestamp providing seconds and microseconds
{
x393_rtc_usec_t usec;
x393_rtc_sec_t sec;
usec.usec = ts.usec;
sec.sec = ts.sec;
spin_lock(&fpga_time_lock);
set_x393_rtc_usec(usec);
set_x393_rtc_sec_set(sec); // And apply
spin_unlock(&fpga_time_lock);
}
src/drivers/elphel/x393_fpga_functions.h
View file @ 9f42f3da
......@@ -16,4 +16,7 @@
*******************************************************************************/
//typedef enum {DIRECT,ABSOLUTE,RELATIVE} x393cmd_t;
#include "x393.h"
void fpga_table_write_nice (int addr, int len, unsigned long * data);
//void fpga_table_write_nice (int addr, int len, unsigned long * data);
sec_usec_t * get_fpga_rtc(sec_usec_t * ts);
void set_fpga_rtc (sec_usec_t ts);
src/include/uapi/elphel/c313a.h
View file @ 9f42f3da
......@@ -208,7 +208,7 @@
*/
// parameter indexes will be updated to group-related ones into the same groups of 32
// NOTE: P_* and G_* should not end with numbers - numbers will be used in PHP constants to add to the constant value (ELPHEL_AAA3 will be treated as ELPHEL_AAA+3)
//#define P_NUMBER 1024 //number of registers (was 64) - NOTE: obsolete?
#define P_NUMBER 1024 //number of registers (was 64) - NOTE: obsolete?
#define P_SENSOR 1 /**< if set to 0 - will (re)detect sensor, if set to None - won't bother <ul>
<li> 4 - ZR32112MLC - now there is no way to see color/mono
<li> 5 - ZR32112PLC
......@@ -1694,6 +1694,12 @@ struct sensorproc_t {
//#define EXPOSURE_UNIT 100 // to move to finer exposure settings - current unit in microseconds. TODO: Propagate it to drivers...
#define EXPOSURE_UNIT 1 ///< to move to finer exposure settings - current unit in microseconds. TODO: Propagate it to drivers...
typedef struct{
unsigned long usec;
unsigned long sec;
} sec_usec_t;
/// width,height, quality are still needed even with new Exif - it is used to rebuild JPEG header
// most parameters are moved out, but width, height, quality are needed for JPEG header, so currently the following are used:
......
src/include/uapi/elphel/x393_devices.h
View file @ 9f42f3da
......@@ -37,10 +37,10 @@
#define DEV393_EXIF_META2 ("exif_meta2", "exif_elphel", 125, 34, "0666", "c") ///< sensor port 2: write metadata, concurrently opened files. All writes are atomic
#define DEV393_EXIF_META3 ("exif_meta3", "exif_elphel", 125, 35, "0666", "c") ///< sensor port 3: write metadata, concurrently opened files. All writes are atomic
#define DEV393_FRAMEPARS0 ("frameparsall0","framepars_operations",125,80, "0666", "c") ///< Access frame parameters for channel 0 (schedule modification, read with mmap)
#define DEV393_FRAMEPARS1 ("frameparsall1","framepars_operations",125,81, "0666", "c") ///< Access frame parameters for channel 1 (schedule modification, read with mmap)
#define DEV393_FRAMEPARS2 ("frameparsall2","framepars_operations",125,82, "0666", "c") ///< Access frame parameters for channel 2 (schedule modification, read with mmap)
#define DEV393_FRAMEPARS3 ("frameparsall3","framepars_operations",125,83, "0666", "c") ///< Access frame parameters for channel 3 (schedule modification, read with mmap)
#define DEV393_FRAMEPARS0 ("frameparsall0","framepars_operations",130,80, "0666", "c") ///< Access frame parameters for channel 0 (schedule modification, read with mmap)
#define DEV393_FRAMEPARS1 ("frameparsall1","framepars_operations",130,81, "0666", "c") ///< Access frame parameters for channel 1 (schedule modification, read with mmap)
#define DEV393_FRAMEPARS2 ("frameparsall2","framepars_operations",130,82, "0666", "c") ///< Access frame parameters for channel 2 (schedule modification, read with mmap)
#define DEV393_FRAMEPARS3 ("frameparsall3","framepars_operations",130,83, "0666", "c") ///< Access frame parameters for channel 3 (schedule modification, read with mmap)
#define DEV393_JTAG_RESET ("fpgaresetjtag", "x393_jtag", 132, 0, "0666", "c") ///< Just close open files (same as jtagraw)
#define DEV393_JTAG_RAW ("jtagraw", "x393_jtag", 132, 0, "0666", "c") ///< Just close open files (same as jtagraw)
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment