updated (9159c877) · Commits · Elphel / linux-elphel

src/drivers/mtd/nand/Kconfig

+60 −19

Original line number	Diff line number	Diff line
		@@ -49,23 +49,20 @@ config MTD_SM_COMMON
		default n

		config MTD_NAND_DENALI
		tristate "Support Denali NAND controller"
		depends on HAS_DMA
		help
		Enable support for the Denali NAND controller. This should be
		combined with either the PCI or platform drivers to provide device
		registration.
		tristate

		config MTD_NAND_DENALI_PCI
		tristate "Support Denali NAND controller on Intel Moorestown"
		depends on PCI && MTD_NAND_DENALI
		select MTD_NAND_DENALI
		depends on HAS_DMA && PCI
		help
		Enable the driver for NAND flash on Intel Moorestown, using the
		Denali NAND controller core.

		config MTD_NAND_DENALI_DT
		tristate "Support Denali NAND controller as a DT device"
		depends on HAVE_CLK && MTD_NAND_DENALI
		select MTD_NAND_DENALI
		depends on HAS_DMA && HAVE_CLK && OF
		help
		Enable the driver for NAND flash on platforms using a Denali NAND
		controller as a DT device.
		@@ -83,7 +80,8 @@ config MTD_NAND_DENALI_SCRATCH_REG_ADDR

		config MTD_NAND_GPIO
		tristate "GPIO assisted NAND Flash driver"
		depends on GPIOLIB
		depends on GPIOLIB \|\| COMPILE_TEST
		depends on HAS_IOMEM
		help
		This enables a NAND flash driver where control signals are
		connected to GPIO pins, and commands and data are communicated
		@@ -97,11 +95,11 @@ config MTD_NAND_AMS_DELTA
		Support for NAND flash on Amstrad E3 (Delta).

		config MTD_NAND_OMAP2
		tristate "NAND Flash device on OMAP2, OMAP3 and OMAP4"
		depends on ARCH_OMAP2PLUS
		tristate "NAND Flash device on OMAP2, OMAP3, OMAP4 and Keystone"
		depends on (ARCH_OMAP2PLUS \|\| ARCH_KEYSTONE)
		help
		Support for NAND flash on Texas Instruments OMAP2, OMAP3 and OMAP4
		platforms.
		Support for NAND flash on Texas Instruments OMAP2, OMAP3, OMAP4
		and Keystone platforms.

		config MTD_NAND_OMAP_BCH
		depends on MTD_NAND_OMAP2
		@@ -320,6 +318,7 @@ config MTD_NAND_CAFE
		config MTD_NAND_CS553X
		tristate "NAND support for CS5535/CS5536 (AMD Geode companion chip)"
		depends on X86_32
		depends on !UML && HAS_IOMEM
		help
		The CS553x companion chips for the AMD Geode processor
		include NAND flash controllers with built-in hardware ECC
		@@ -401,6 +400,14 @@ config MTD_NAND_GPMI_NAND
		block, such as SD card. So pay attention to it when you enable
		the GPMI.

		config MTD_NAND_BRCMNAND
		tristate "Broadcom STB NAND controller"
		depends on ARM \|\| ARM64 \|\| MIPS
		help
		Enables the Broadcom NAND controller driver. The controller was
		originally designed for Set-Top Box but is used on various BCM7xxx,
		BCM3xxx, BCM63xxx, iProc/Cygnus and more.

		config MTD_NAND_BCM47XXNFLASH
		tristate "Support for NAND flash on BCM4706 BCMA bus"
		depends on BCMA_NFLASH
		@@ -428,7 +435,7 @@ config MTD_NAND_ORION

		config MTD_NAND_FSL_ELBC
		tristate "NAND support for Freescale eLBC controllers"
		depends on PPC
		depends on FSL_SOC
		select FSL_LBC
		help
		Various Freescale chips, including the 8313, include a NAND Flash
		@@ -438,7 +445,7 @@ config MTD_NAND_FSL_ELBC

		config MTD_NAND_FSL_IFC
		tristate "NAND support for Freescale IFC controller"
		depends on MTD_NAND && FSL_SOC
		depends on FSL_SOC \|\| ARCH_LAYERSCAPE
		select FSL_IFC
		select MEMORY
		help
		@@ -462,6 +469,18 @@ config MTD_NAND_MPC5121_NFC
		This enables the driver for the NAND flash controller on the
		MPC5121 SoC.

		config MTD_NAND_VF610_NFC
		tristate "Support for Freescale NFC for VF610/MPC5125"
		depends on (SOC_VF610 \|\| COMPILE_TEST)
		depends on HAS_IOMEM
		help
		Enables support for NAND Flash Controller on some Freescale
		processors like the VF610, MPC5125, MCF54418 or Kinetis K70.
		The driver supports a maximum 2k page size. With 2k pages and
		64 bytes or more of OOB, hardware ECC with up to 32-bit error
		correction is supported. Hardware ECC is only enabled through
		device tree.

		config MTD_NAND_MXC
		tristate "MXC NAND support"
		depends on ARCH_MXC
		@@ -471,7 +490,7 @@ config MTD_NAND_MXC

		config MTD_NAND_SH_FLCTL
		tristate "Support for NAND on Renesas SuperH FLCTL"
		depends on SUPERH \|\| ARCH_SHMOBILE \|\| COMPILE_TEST
		depends on SUPERH \|\| COMPILE_TEST
		depends on HAS_IOMEM
		depends on HAS_DMA
		help
		@@ -518,6 +537,13 @@ config MTD_NAND_JZ4740
		help
		Enables support for NAND Flash on JZ4740 SoC based boards.

		config MTD_NAND_JZ4780
		tristate "Support for NAND on JZ4780 SoC"
		depends on MACH_JZ4780 && JZ4780_NEMC
		help
		Enables support for NAND Flash connected to the NEMC on JZ4780 SoC
		based boards, using the BCH controller for hardware error correction.

		config MTD_NAND_FSMC
		tristate "Support for NAND on ST Micros FSMC"
		depends on PLAT_SPEAR \|\| ARCH_NOMADIK \|\| ARCH_U8500 \|\| MACH_U300
		@@ -528,7 +554,6 @@ config MTD_NAND_FSMC
		config MTD_NAND_XWAY
		tristate "Support for NAND on Lantiq XWAY SoC"
		depends on LANTIQ && SOC_TYPE_XWAY
		select MTD_NAND_PLATFORM
		help
		Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached
		to the External Bus Unit (EBU).
		@@ -541,9 +566,11 @@ config MTD_NAND_SUNXI

		config MTD_NAND_ARASAN
		tristate "Support for Arasan Nand Flash controller"
		depends on MTD_NAND
		depends on HAS_IOMEM
		depends on HAS_DMA
		help
		Enables the driver for the Arasan Nand Flash controller in ZynqMP SoC.
		Enables the driver for the Arasan Nand Flash controller on
		Zynq Ultrascale+ MPSoC.

		config MTD_NAND_HISI504
		tristate "Support for NAND controller on Hisilicon SoC Hip04"
		@@ -551,4 +578,18 @@ config MTD_NAND_HISI504
		help
		Enables support for NAND controller on Hisilicon SoC Hip04.

		config MTD_NAND_QCOM
		tristate "Support for NAND on QCOM SoCs"
		depends on ARCH_QCOM
		help
		Enables support for NAND flash chips on SoCs containing the EBI2 NAND
		controller. This controller is found on IPQ806x SoC.

		config MTD_NAND_MTK
		tristate "Support for NAND controller on MTK SoCs"
		depends on HAS_DMA
		help
		Enables support for NAND controller on MTK SoCs.
		This controller is found on mt27xx, mt81xx, mt65xx SoCs.

		endif # MTD_NAND

src/drivers/mtd/nand/Makefile

+8 −2

Original line number	Diff line number	Diff line
		@@ -26,7 +26,8 @@ obj-$(CONFIG_MTD_NAND_CS553X) += cs553x_nand.o
		obj-$(CONFIG_MTD_NAND_NDFC) += ndfc.o
		obj-$(CONFIG_MTD_NAND_ATMEL) += atmel_nand.o
		obj-$(CONFIG_MTD_NAND_GPIO) += gpio.o
		obj-$(CONFIG_MTD_NAND_OMAP2) += omap2.o
		omap2_nand-objs := omap2.o
		obj-$(CONFIG_MTD_NAND_OMAP2) += omap2_nand.o
		obj-$(CONFIG_MTD_NAND_OMAP_BCH_BUILD) += omap_elm.o
		obj-$(CONFIG_MTD_NAND_CM_X270) += cmx270_nand.o
		obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o
		@@ -45,14 +46,19 @@ obj-$(CONFIG_MTD_NAND_SOCRATES) += socrates_nand.o
		obj-$(CONFIG_MTD_NAND_TXX9NDFMC) += txx9ndfmc.o
		obj-$(CONFIG_MTD_NAND_NUC900) += nuc900_nand.o
		obj-$(CONFIG_MTD_NAND_MPC5121_NFC) += mpc5121_nfc.o
		obj-$(CONFIG_MTD_NAND_VF610_NFC) += vf610_nfc.o
		obj-$(CONFIG_MTD_NAND_RICOH) += r852.o
		obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o
		obj-$(CONFIG_MTD_NAND_JZ4780) += jz4780_nand.o jz4780_bch.o
		obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/
		obj-$(CONFIG_MTD_NAND_XWAY) += xway_nand.o
		obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) += bcm47xxnflash/
		obj-$(CONFIG_MTD_NAND_SUNXI) += sunxi_nand.o
		obj-$(CONFIG_MTD_NAND_PL35X) += pl35x_nand.o
		obj-$(CONFIG_MTD_NAND_ARASAN) += arasan_nfc.o
		obj-$(CONFIG_MTD_NAND_ARASAN) += arasan_nand.o
		obj-$(CONFIG_MTD_NAND_HISI504) += hisi504_nand.o
		obj-$(CONFIG_MTD_NAND_BRCMNAND) += brcmnand/
		obj-$(CONFIG_MTD_NAND_QCOM) += qcom_nandc.o
		obj-$(CONFIG_MTD_NAND_MTK) += mtk_nand.o mtk_ecc.o

		nand-objs := nand_base.o nand_bbt.o nand_timings.o nandchip-micron.o

Admin message