Skip to content

L
linux-elphel
Commit 83cfb429 authored by Andrey Filippov's avatar Andrey Filippov
Browse files
Options

debuging Boson driver

parent 6405f029
Show whitespace changes
Inline Side-by-side
Showing with 23 additions and 178 deletions
src/drivers/elphel/boson640.c
View file @ 83cfb429
......@@ -295,7 +295,7 @@ struct sensor_t boson640={
};
// Sysfs Interface for debugging the driver
static int first_sensor_sa7 [SENSOR_PORTS] = {0,0,0,0};
//static int first_sensor_sa7 [SENSOR_PORTS] = {0,0,0,0};
/*
static unsigned int debug_delays = 0x0; // 0x6464; // udelay() values for mrst (low 8 - mrst on), [15:8] - after mrst
static unsigned int debug_modes = 3;
......@@ -835,7 +835,7 @@ int boson640_is_booted ( int sensor_port,
cframe = getThisFrameNumber(sensor_port); // was cframe16?
if (cframe < BOSON640_BOOT_FRAME){
// dev_warn(g_dev_ptr,"boson640_is_booted(): Not yet fully booted{%d}, frame %d < %d\n",sensor_port, cframe, BOSON640_BOOT_FRAME);
dev_warn(g_dev_ptr,"boson640_is_booted(): Not yet fully booted{%d}, frame %d < %d, P_COLOR =%ld\n",sensor_port, cframe, BOSON640_BOOT_FRAME,thispars->pars[P_COLOR]);
dev_dbg(g_dev_ptr,"boson640_is_booted(): Not yet fully booted{%d}, frame %d < %d, P_COLOR =%ld\n",sensor_port, cframe, BOSON640_BOOT_FRAME,thispars->pars[P_COLOR]);
return 0; // too early
}
setFramePar(sensor_port, thispars, P_BOOTED, 1); // should initiate pgm_initsensor and others?
......@@ -965,6 +965,11 @@ int boson640_pgm_initsensor (int sensor_port, ///< sensor port
i2c_stop_run_reset (sensor_port, I2C_CMD_RUN); // also programs status update
#endif
// Enable extif (Boson UART CCI from the sequencer)
uart_extif_en[sensor_port] = 1;
set_sensor_uart_ctl_boson (sensor_port, uart_extif_en[sensor_port], -1, -1, 0, 0);
dev_info(g_dev_ptr,"boson640_pgm_initsensor(): {%d} frame16=%d frame=%ld: Enable EXTIF (Boson UART control from the sequencer)\n",sensor_port,frame16,getThisFrameNumber(sensor_port));
// boson640_par2addr
// read shadows from the sensor, ignore errors
......@@ -1854,11 +1859,10 @@ int boson640_init(struct platform_device *pdev)
// int res;
struct device *dev = &pdev->dev;
// const struct of_device_id *match;
int sensor_port;
for (sensor_port = 0; sensor_port < SENSOR_PORTS; sensor_port++) {
first_sensor_sa7[sensor_port] = 0;
}
/// int sensor_port;
/// for (sensor_port = 0; sensor_port < SENSOR_PORTS; sensor_port++) {
/// first_sensor_sa7[sensor_port] = 0;
/// }
elphel393_boson640_sysfs_register(pdev);
dev_info(dev, DEV393_NAME(DEV393_BOSON640)": registered sysfs\n");
g_dev_ptr = dev;
......
src/drivers/elphel/pgm_functions.c
View file @ 83cfb429
......@@ -15,169 +15,6 @@
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*******************************************************************************/
/* $Log: pgm_functions.c,v $
*! Revision 1.24 2012/03/14 00:05:41 elphel
*! 8.2.1 - GPS speed, x353.bit file tested on Eyesis
*!
*! Revision 1.23 2012/01/16 01:48:00 elphel
*! increased initial sensor clock frequency (20MHz->40MHz)
*!
*! Revision 1.22 2011/12/22 05:40:05 elphel
*! bug fix
*!
*! Revision 1.21 2010/08/10 21:10:41 elphel
*! portrait mode now includes all 4 rotations (2 bits)
*!
*! Revision 1.20 2010/08/03 23:37:34 elphel
*! rev 8.0.8.37, portrait mode support
*!
*! Revision 1.19 2010/08/01 19:29:24 elphel
*! files updated to support coring function for noise filtering
*!
*! Revision 1.18 2010/06/06 04:24:10 elphel
*! updated debug message
*!
*! Revision 1.17 2010/06/05 07:11:48 elphel
*! modified startup options
*!
*! Revision 1.16 2010/06/02 16:31:04 elphel
*! Added P_MULTI_SELECTED parameter
*!
*! Revision 1.15 2010/06/01 08:30:36 elphel
*! support for the FPGA code 03534022 with optional master time stamp over the inter-camera sync line(s)
*!
*! Revision 1.14 2010/05/25 00:52:23 elphel
*! 8.0.8.20, working on multi-sensor
*!
*! Revision 1.13 2010/05/21 06:12:16 elphel
*! continue working on multi-sensor software
*!
*! Revision 1.12 2010/05/13 03:39:31 elphel
*! 8.0.8.12 - drivers modified for multi-sensor operation
*!
*! Revision 1.11 2010/04/30 23:38:49 elphel
*! fixed WOI_TOP in linescan mode
*!
*! Revision 1.10 2010/04/30 00:29:54 elphel
*! bug fixes related to linescan mode
*!
*! Revision 1.9 2010/04/28 02:34:33 elphel
*! 8.0.6.6 - added support for linescan mode (also useful for high fps small images). 2.5K full line pairs/second with 5MPix sensor
*!
*! Revision 1.8 2010/04/24 21:40:15 elphel
*! 8.0.8.4 (FPGA 03534016), most changes related to sensor signals phase adjustments
*!
*! Revision 1.7 2010/01/27 22:51:52 elphel
*! turned off ELPHEL_DEBUG, fixed errors caused by that.
*!
*! Revision 1.6 2009/03/16 02:07:41 elphel
*! Bug fix when calculating total width for focus processing - FPGA requires data 16 less than the actual WOI width
*!
*! Revision 1.5 2008/12/08 21:55:02 elphel
*! making 3MPix work, minor cleanup
*!
*! Revision 1.4 2008/12/02 19:11:08 elphel
*! bug fix in sensor detection, removed unneeded initialization for P_GAIN*
*!
*! Revision 1.3 2008/12/02 00:29:04 elphel
*! Added FIXME for the known problem
*!
*! Revision 1.2 2008/11/30 05:01:03 elphel
*! Changing gains/scales behavior
*!
*! Revision 1.1.1.1 2008/11/27 20:04:00 elphel
*!
*!
*! Revision 1.32 2008/11/27 09:27:31 elphel
*! Support fro new parameters (vignetting correction related)
*!
*! Revision 1.31 2008/11/14 01:01:40 elphel
*! fixed new bug in pgm_gammaload
*!
*! Revision 1.30 2008/11/13 05:40:45 elphel
*! 8.0.alpha16 - modified histogram storage, profiling
*!
*! Revision 1.29 2008/11/03 18:43:18 elphel
*! 8.0.alpha12 with working apps/astreamer
*!
*! Revision 1.28 2008/10/31 18:26:32 elphel
*! Adding support for constants like SENSOR_REGS32 (defined constant plus 32 to simplify referencing sensor registers from PHP
*!
*! Revision 1.27 2008/10/29 04:18:28 elphel
*! v.8.0.alpha10 made a separate structure for global parameters (not related to particular frames in a frame queue)
*!
*! Revision 1.26 2008/10/23 08:08:05 elphel
*! corrected histogram window size setup (data written to FPGA is actual window size -2 for both width and height)
*!
*! Revision 1.25 2008/10/22 05:29:03 elphel
*! Rev. 8.0.alpha5 - working on external trigger mode - moved programming away from the sequencer that can only pass 24 data bits
*!
*! Revision 1.24 2008/10/21 04:03:39 elphel
*! bug fix (missing break in switch)
*!
*! Revision 1.23 2008/10/20 18:45:07 elphel
*! just more debug printk
*!
*! Revision 1.22 2008/10/18 06:14:21 elphel
*! 8.0.alpha4 - removed some obsolete parameters, renumbered others, split P_FLIP into P_FLIPH and P_FLIPV (different latencies because of bad frames), pgm_window-> pgm_window, pgm_window_safe
*!
*! Revision 1.21 2008/10/17 05:44:48 elphel
*! fixing latencies
*!
*! Revision 1.20 2008/10/12 06:13:10 elphel
*! snapshot
*!
*! Revision 1.19 2008/10/11 18:46:07 elphel
*! snapshot
*!
*! Revision 1.18 2008/10/08 21:26:25 elphel
*! snapsot 7.2.0.pre4 - first images (actually - second)
*!
*! Revision 1.17 2008/10/06 08:33:03 elphel
*! snapshot, first images
*!
*! Revision 1.15 2008/10/05 05:13:33 elphel
*! snapshot003
*!
*! Revision 1.14 2008/10/04 16:10:12 elphel
*! snapshot
*!
*! Revision 1.13 2008/09/28 00:31:57 elphel
*! snapshot
*!
*! Revision 1.12 2008/09/25 00:58:12 elphel
*! snapshot
*!
*! Revision 1.11 2008/09/22 22:55:49 elphel
*! snapshot
*!
*! Revision 1.10 2008/09/19 04:37:26 elphel
*! snapshot
*!
*! Revision 1.9 2008/09/16 00:49:32 elphel
*! snapshot
*!
*! Revision 1.8 2008/09/12 20:40:13 elphel
*! snapshot
*!
*! Revision 1.7 2008/09/12 00:23:59 elphel
*! removed cc353.c, cc353.h
*!
*! Revision 1.6 2008/09/05 23:21:32 elphel
*! snapshot
*!
*! Revision 1.4 2008/09/04 17:37:13 elphel
*! documenting
*!
*! Revision 1.3 2008/07/29 01:15:06 elphel
*! another snapshot
*!
*! Revision 1.2 2008/07/27 23:25:07 elphel
*! next snapshot
*!
*! Revision 1.1 2008/07/27 04:27:49 elphel
*! next snapshot
*/
// TODO:remove unneeded
//#define DEBUG // should be before linux/module.h - enables dev_dbg at boot in this file (needs "debug" in bootarg)
......
src/drivers/elphel/sensor_common.c
View file @ 83cfb429
......@@ -1209,7 +1209,8 @@ int fpga_register_i2c_pages(int port, int sub_chn, x393_i2c_device_t i2c_dev){
haddr = (table[i]>>8)&0xff;
dev_dbg(g_dev_ptr,"Registering page %d for haddr= 0x%02x, sa7= 0x%02x\n",line_num, haddr, i2c_dev.slave7);
// dev_dbg(g_dev_ptr,"Registering page %d for haddr= 0x%02x, sa7= 0x%02x\n",line_num, haddr, i2c_dev.slave7);
// dev_info(g_dev_ptr,"Registering page %d for haddr= 0x%02x, sa7= 0x%02x\n",line_num, haddr, i2c_dev.slave7);
if ((table[i]==0xffff)||(i>255)){
dev_dbg(g_dev_ptr,"haddr2rec (entries: %d)\n",i);
......@@ -1224,6 +1225,7 @@ int fpga_register_i2c_pages(int port, int sub_chn, x393_i2c_device_t i2c_dev){
pr_err("{%d} Error registering page %d (haddr = 0x%02x)\n",port,line_num,haddr);
return line_num;
}
dev_dbg(g_dev_ptr,"Registering page %d for haddr= 0x%02x, sa7= 0x%02x\n",line_num, haddr, i2c_dev.slave7);
//line_num = i2c_dev.slave7;
//haddr = 0;
......
src/drivers/elphel/sensor_i2c.c
View file @ 83cfb429
......@@ -388,17 +388,17 @@ void set_xi2c_wrc( x393_i2c_device_t * dc, ///< device class
tb_data.d32 = 0;
tb_data.rah = rah;
tb_data.rnw = 0;
tb_data.sa = dc -> slave7;
tb_data.sa = dc -> slave7; // verify 0x81 - no, 7 bits!
tb_data.nbwr = dc -> address_bytes + dc -> data_bytes;
tb_data.dly = get_bit_delay(dc -> scl_khz);
tb_data.tbl_mode = 2;
tb_data.extif_mode = 0;
if (tb_data.sa & 0x80){ // using external interface (currently Boson640 UART)
if (dc -> slave7 & 0x80){ // using external interface (currently Boson640 UART)
tb_data.extif_mode = tb_data.sa & 3;
tb_data.sa = (tb_data.rah >> 6) & 3; // number of bytes in uart command (later use (rah >> 8) after changing sensor_port_config_t.pages_ptr to 32 bits)
tb_data.rah &= 0x3f; // later &= 0xff
}
dev_dbg(sdev, "device name %s : port= %d, page = 0x%x, rah = 0x%x, sa = 0x%x, extif_mode=0x%x\n",dc->name, chn, page, tb_data.rah, tb_data.sa, tb_data.extif_mode);
dev_dbg(sdev, "set_xi2c_wrc(): device name %s : port= %d, page = 0x%x, rah = 0x%x, sa = 0x%x, extif_mode=0x%x\n",dc->name, chn, page, tb_data.rah, tb_data.sa, tb_data.extif_mode);
/* Table address and data should not interleave with others */
#ifdef LOCK_BH_SENSORI2C
spin_lock_bh(sensori2c_locks[chn]);
......@@ -414,7 +414,7 @@ void set_xi2c_wrc( x393_i2c_device_t * dc, ///< device class
#endif
// i2c_pages_shadow[(chn << 8) + page] =tb_data.d32;
i2c_pages_shadow[chn][page] =tb_data.d32;
dev_dbg(sdev, "DONE: device name %s : port= %d, page = 0x%x, rah = 0x%x, sa = 0x%x, extif_mode=0x%x\n",dc->name, chn, page, tb_data.rah, tb_data.sa, tb_data.extif_mode);
dev_dbg(sdev, "x393_sensi2c_ctrl() twice, device name %s : port= %d, page = 0x%x, tb_addr=0x%x, tb_data=0x%x\n",dc->name, chn, page, tb_addr.d32, tb_data.d32);
}
EXPORT_SYMBOL_GPL(set_xi2c_wrc);
/** Set i2c table entry for read operation using known devices
......@@ -722,11 +722,12 @@ void read_xi2c (x393_i2c_device_t * dc, ///< device class
int page, ///< Table index (8 bits)
int addr) ///< 8/16 bit register address
{
u32 dw;
if ((dc -> slave7) & 0x80){
dev_warn(sdev, "Read not implemented for extif");
return;
}
u32 dw = ((page & 0xff) << 24) | (dc -> slave7 << 17) | (addr & 0xffff);
dw = ((page & 0xff) << 24) | (dc -> slave7 << 17) | (addr & 0xffff);
x393_sensi2c_rel (dw, chn, 0);
dev_dbg(sdev, "chn=%d, page = %d, addr = %d\n",chn,page, addr);
......@@ -742,11 +743,12 @@ void read_xi2c_sa7 (int chn, ///< sensor port
int sa7, ///< 7-bit i2c slave address
int addr) ///< 8/16 bit register address
{
u32 dw;
if (sa7 & 0x80){
dev_warn(sdev, "Read not implemented for extif 2");
return;
}
u32 dw = ((page & 0xff) << 24) | (sa7 << 17) | (addr & 0xffff);
dw = ((page & 0xff) << 24) | (sa7 << 17) | (addr & 0xffff);
dev_dbg(sdev, "read_xi2c_sa7(%d,0x%x,0x%x,0x%x): 0x%08x\n",chn,page,sa7,addr,(int) dw);
x393_sensi2c_rel (dw, chn, 0);
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment