Commit 6acff496 authored by Oleg Dzhimiev's avatar Oleg Dzhimiev

added P_CLK_SENSPIX

parent 713d8b38
......@@ -312,6 +312,7 @@
<li> bit 4 - global reset release (GRR) mode - (only when combined with bit 2)
</ul>*/
#define P_BGFRAME 16 ///< Background measurement mode - will use 16-bit mode and no FPN correction
#define P_CLK_SENSPIX 17 ///< Sensor's internal pixel clock in Hz (if defined as in MT9F002)
//#define P_IMGSZMEM 17 ///< image size in video memory (calculated when channel 0 is programmed) NC393: Not used ???
//#define P_COMP_BAYER 17 ///< -> 119 derivative, readonly - calculated from P_BAYER and COMPMOD_BYRSH to separate sensor and compressor channels
// image page numbers depend on image size/pixel depth, so changing any of them will invalidate all pages
......@@ -1552,6 +1553,9 @@ struct p_names_t {
#define LSEEK_FSDRAM_RESET 0x01 // re-program FSDRAM (to be programmed again when accessed)
// Videomem/raw image commands
#define LSEEK_VIDEOMEM_START 0x10 // setup and start membridge transfer
#define JPEG_CTRL_MONOCHROME 0x400
#define JPEG_CTRL_MONOCHROME_BLOCKED 0x1000
#define JPEG_CTRL_NOMOSAIC 0x1000
......@@ -1647,8 +1651,10 @@ struct p_names_t {
/* For past compatibility, CCMA_DMA_SIZE...
*/
//#define CCAM_DMA_SIZE CCAM_WORDS_PER_DMABUF
// Moved to DT
#define CCAM_DMA_SIZE 0x4000000 ///< Each channel buffer size in BYTES (was in DWORDS in NC353) TODO NC393: use only for initial allocation, move to DT
#define CIRCBUF_START_OFFSET 0x100000 ///< Offset for the first bufer TODO NC393: use only for initial allocation, move to DT
// Moved to DT
//#define CIRCBUF_START_OFFSET 0x100000 ///< Offset for the first bufer TODO NC393: use only for initial allocation, move to DT
/*
* CCAM_MMAP_OFFSET... -- offsets in bytes in memory mapped region.
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment