Commit 27f25ce6 authored by Andrey Filippov's avatar Andrey Filippov

fixed vsc330x.c

parent 1436d5e5
......@@ -5,12 +5,12 @@
<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="cdt.managedbuild.toolchain.gnu.base.1636449201" moduleId="org.eclipse.cdt.core.settings" name="Default">
<externalSettings/>
<extensions>
<extension id="org.eclipse.cdt.core.ELF" point="org.eclipse.cdt.core.BinaryParser"/>
<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
<extension id="org.eclipse.cdt.core.ELF" point="org.eclipse.cdt.core.BinaryParser"/>
</extensions>
</storageModule>
<storageModule moduleId="cdtBuildSystem" version="4.0.0">
......
......@@ -28,6 +28,7 @@
#include <linux/of.h>
#define DRV_VERSION "1.0"
/* TODO: Descriptions from vsc3312 - check differences */
#define I2C_PAGE_CONNECTION 0x00 /* When written to I2C_CURRENT_PAGE, makes registers 0..0xf control corresponding output (0..0xf) source
(input number) bit 4 (+0x10) - turn output off, bits 3:0 - source */
......@@ -99,7 +100,7 @@
#define I2C_INTERFACE_MODE 0x79
#define I2C_INTERFACE_MODE_DATA 0x02 /* i2c (1 - 4-wire) */
#define I2C_SOFTWARE_RESET 0x7a
#define I2C_SOFTWARE_RESET_DATA 0x10 /* to reset, 0 - normal */
//#define I2C_SOFTWARE_RESET_DATA 0x10 /* to reset, 0 - normal */ not used - but number 4 is used instead
#define I2C_CURRENT_PAGE 0x7f
#define PORT_PEFIX "port_"
#define ALL_PORTS "all"
......@@ -650,7 +651,10 @@ static int _init_device(struct i2c_client *client, int address_mode_data)
int rc;
if (((rc=write_reg(client, I2C_INTERFACE_MODE, I2C_INTERFACE_MODE_DATA)))<0) return rc;
if (address_mode_data >=0){ /* only write if needed, 3304 needs, 3312 - does not, 3308 - ? */
if (((rc=write_reg(client, I2C_SOFTWARE_RESET_DATA, address_mode_data)))<0) return rc;
// if (((rc=write_reg(client, I2C_SOFTWARE_RESET_DATA, address_mode_data)))<0) return rc;
// this bug caused me to assemble a new board, urgently find vsc3304 chip,spend several days trying to troubleshoot...
// Just five extra characters!
if (((rc=write_reg(client, I2C_SOFTWARE_RESET, address_mode_data)))<0) return rc;
}
if (((rc=write_reg(client, I2C_CURRENT_PAGE, 0)))<0) return rc;
return 0;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment