#define X313_TIMESTAMPLEN 28 // pixels used for timestamp (in linescan mode added after the line)
#define X3X3_RSTSENSDCM // FPGA DCM can fail after clock change, needs to be reset
#define X3X3_SENSDCM_CLK2X_RESET // reset pclk2x DCM also
#define I2C359_CLK_NUMBER 4
#define CCAM_NEGRST //set negative MRST polarity
#define CCAM_TRIG_INT
#define CCAM_MRST_OFF
#define CCAM_ARST_OFF
#define CCAM_ARST_ON
#define CCAM_RESET_MCONTR_ON // Set mode that resets memory controller pointers after each frame sync. TODO: Later - make it work without?
#define CCAM_ENDFRAMES_EN // Enable ending frame being compressed if no more data will be available (frame ended before specified number of blocks compressed)
#define CCAM_ARO_ON //set
#define CCAM_DCLK_ON
#define CCAM_CNVEN_OFF
#define CCAM_MRST_ON
#define CCAM_EXTERNALTS_EN // Maybe use default as enabled - yes, it will not be active if not available
#define DEMOS_MONO4 14 // monochrome, but the block scan order is still the same as in YCbCr 4:2:0 (macroblocks in scan order, block in 2x2 macroblock in scan order)
// [8:7] == 0,1 - NOP, 2 - disable, 3 - enable subtracting of average value (DC component), bypassing DCT
// #define X313_RA_HIST_DATA 0x45 /// use CSP4 with wait cycles to have a pulse
port_csp0_addr[X313_WA_HIST_ADDR]=addr;/// Write start address, read first word from the memory to the output buffer (will be read out during next read)
X3X3_AFTERWRITE;//! needed before reading from FPGA after writing to it (for the writes that influence reads only)
for(i=0;i<l;i++)data[i]=port_csp4_addr[X313_RA_HIST_DATA];/// will autoincrement FPGA table address)
/** @brief Number of elements in quantization table */
/** @brief Number of elements in quantization table */
#define QTABLE_SIZE 64
#define QTABLE_SIZE 64
...
@@ -127,15 +128,14 @@ static unsigned int std_quant_tbls[4 * QTABLE_SIZE] = { /// make it possible to
...
@@ -127,15 +128,14 @@ static unsigned int std_quant_tbls[4 * QTABLE_SIZE] = { /// make it possible to
/// with a number of programmed tables equal to PARS_FRAMES, and that "this" table is not needed it will always be possible to find an unused table slot
/// with a number of programmed tables equal to PARS_FRAMES, and that "this" table is not needed it will always be possible to find an unused table slot
#define DEV393_GAMMA ("gamma_cache","gamma_tables_operations",137,17,"0666", "c") ///< Cache for calculated gamma tables (common for all ports/channels/colors)
#define DEV393_GAMMA ("gamma_cache","gamma_tables_operations",137,17,"0666", "c") ///< Cache for calculated gamma tables (common for all ports/channels/colors)
#define DEV393_HISTOGRAM ("histogram_cache","histograms_operations",138,18,"0666","c") ///< Access to acquired/calculated histograms for all ports/channels/colors
#ifdef INDIVIDUAL_HISTOGRAMS
#define DEV393_HISTOGRAM00 ("histogram_cache00","histograms_operations",138,80,"0666","c") ///< Access to acquired/calculated histograms for port 0 /subcchanne 0
#define DEV393_HISTOGRAM01 ("histogram_cache01","histograms_operations",138,81,"0666","c") ///< Access to acquired/calculated histograms for port 0 /subcchanne 1
#define DEV393_HISTOGRAM02 ("histogram_cache02","histograms_operations",138,82,"0666","c") ///< Access to acquired/calculated histograms for port 0 /subcchanne 2
#define DEV393_HISTOGRAM03 ("histogram_cache03","histograms_operations",138,83,"0666","c") ///< Access to acquired/calculated histograms for port 0 /subcchanne 3
#define DEV393_HISTOGRAM10 ("histogram_cache10","histograms_operations",138,84,"0666","c") ///< Access to acquired/calculated histograms for port 1 /subcchanne 0
#define DEV393_HISTOGRAM11 ("histogram_cache11","histograms_operations",138,85,"0666","c") ///< Access to acquired/calculated histograms for port 1 /subcchanne 1
#define DEV393_HISTOGRAM12 ("histogram_cache12","histograms_operations",138,86,"0666","c") ///< Access to acquired/calculated histograms for port 1 /subcchanne 2
#define DEV393_HISTOGRAM13 ("histogram_cache13","histograms_operations",138,87,"0666","c") ///< Access to acquired/calculated histograms for port 1 /subcchanne 3
#define DEV393_HISTOGRAM20 ("histogram_cache20","histograms_operations",138,88,"0666","c") ///< Access to acquired/calculated histograms for port 2 /subcchanne 0
#define DEV393_HISTOGRAM21 ("histogram_cache21","histograms_operations",138,89,"0666","c") ///< Access to acquired/calculated histograms for port 2 /subcchanne 1
#define DEV393_HISTOGRAM22 ("histogram_cache22","histograms_operations",138,90,"0666","c") ///< Access to acquired/calculated histograms for port 2 /subcchanne 2
#define DEV393_HISTOGRAM23 ("histogram_cache23","histograms_operations",138,91,"0666","c") ///< Access to acquired/calculated histograms for port 2 /subcchanne 3
#define DEV393_HISTOGRAM30 ("histogram_cache30","histograms_operations",138,92,"0666","c") ///< Access to acquired/calculated histograms for port 3 /subcchanne 0
#define DEV393_HISTOGRAM31 ("histogram_cache31","histograms_operations",138,93,"0666","c") ///< Access to acquired/calculated histograms for port 3 /subcchanne 1
#define DEV393_HISTOGRAM32 ("histogram_cache32","histograms_operations",138,94,"0666","c") ///< Access to acquired/calculated histograms for port 3 /subcchanne 2
#define DEV393_HISTOGRAM33 ("histogram_cache33","histograms_operations",138,95,"0666","c") ///< Access to acquired/calculated histograms for port 3 /subcchanne 3
#else
#define DEV393_HISTOGRAM ("histogram_cache","histograms_operations",138,18,"0666","c") ///< Access to acquired/calculated histograms for all ports/subchannels
