Commit f2bd20ab authored by Dick Hollenbeck's avatar Dick Hollenbeck

Mostly EAGLE_PLUGIN work:

* Derive the pcbnew copper zone and non-copper zone dialog windows from DIAG_SHIM,
  which injects some template code.
* Update UIpolicies.txt to talk about DIALOG_SHIM support.
* Add zone support to eagle_plugin.
* Organize ZONE_CONTAINER class declaration for future privacy and accessors.
parent 52318f69
......@@ -42,6 +42,14 @@ Dialogs:
leaving them all bundled tightly together. The dialog box should look
nice at any size large enough to show all the components.
When using wxFormBuilder, please add the following settings to the
"Dialog" node:
subclass.name <- DIALOG_SHIM
subclass.header <- dialog_shim.h
This will provide for an override of the Show( bool ) wxWindow() function
and provide retentitive size and position for the session.
Use tooltips to explain the functionality of each non-obvious control.
This is important because the help files and the wiki often lag behind
the source code.
......
......@@ -1468,7 +1468,7 @@ int BOARD::SetAreasNetCodesFromNetNames( void )
if( GetArea( ii )->GetNet() != 0 ) // i.e. if this zone is connected to a net
{
const NETINFO_ITEM* net = FindNet( GetArea( ii )->m_Netname );
const NETINFO_ITEM* net = FindNet( GetArea( ii )->GetNetName() );
if( net )
{
......
......@@ -74,6 +74,7 @@ ZONE_CONTAINER::ZONE_CONTAINER( const ZONE_CONTAINER& aZone ) :
// For corner moving, corner index to drag, or -1 if no selection
m_CornerSelection = -1;
m_IsFilled = aZone.m_IsFilled;
m_ZoneClearance = aZone.m_ZoneClearance; // clearance value
m_ZoneMinThickness = aZone.m_ZoneMinThickness;
m_FillMode = aZone.m_FillMode; // Filling mode (segments/polygons)
......@@ -84,6 +85,11 @@ ZONE_CONTAINER::ZONE_CONTAINER( const ZONE_CONTAINER& aZone ) :
m_ThermalReliefCopperBridge = aZone.m_ThermalReliefCopperBridge;
m_FilledPolysList = aZone.m_FilledPolysList;
m_FillSegmList = aZone.m_FillSegmList;
cornerSmoothingType = aZone.cornerSmoothingType;
cornerRadius = aZone.cornerRadius;
utility = aZone.utility;
utility2 = aZone.utility;
}
......@@ -717,7 +723,7 @@ void ZONE_CONTAINER::DisplayInfo( EDA_DRAW_FRAME* frame )
frame->AppendMsgPanel( _( "Corners" ), msg, BLUE );
if( m_FillMode )
msg.Printf( _( "Segments" ), m_FillMode );
msg = _( "Segments" );
else
msg = _( "Polygons" );
......
......@@ -77,58 +77,7 @@ struct SEGMENT
class ZONE_CONTAINER : public BOARD_CONNECTED_ITEM
{
public:
wxString m_Netname; // Net Name
CPolyLine* m_Poly; // outlines
// For corner moving, corner index to drag, or -1 if no selection.
int m_CornerSelection;
int m_ZoneClearance; // clearance value
int m_ZoneMinThickness; // Min thickness value in filled areas
// How to fill areas: 0 = use filled polygons, != 0 fill with segments.
int m_FillMode;
// number of segments to convert a circle to a polygon (uses
//ARC_APPROX_SEGMENTS_COUNT_LOW_DEF or ARC_APPROX_SEGMENTS_COUNT_HIGHT_DEF)
int m_ArcToSegmentsCount;
// thickness of the gap in thermal reliefs.
int m_ThermalReliefGap;
// thickness of the copper bridge in thermal reliefs
int m_ThermalReliefCopperBridge;
int utility, utility2; // flags used in polygon calculations
// true when a zone was filled, false after deleting the filled areas
bool m_IsFilled;
/* set of filled polygons used to draw a zone as a filled area.
* from outlines (m_Poly) but unlike m_Poly these filled polygons have no hole
* (they are* all in one piece) In very simple cases m_FilledPolysList is same
* as m_Poly. In less simple cases (when m_Poly has holes) m_FilledPolysList is
* a polygon equivalent to m_Poly, without holes but with extra outline segment
* connecting "holes" with external main outline. In complex cases an outline
* described by m_Poly can have many filled areas
*/
std::vector <CPolyPt> m_FilledPolysList;
/* set of segments used to fill area, when fill zone by segment is used.
* ( m_FillMode == 1 )
* in this case segments have m_ZoneMinThickness width
*/
std::vector <SEGMENT> m_FillSegmList;
private:
CPolyLine* smoothedPoly; // Corner-smoothed version of m_Poly
int cornerSmoothingType;
unsigned int cornerRadius;
// Priority: when a zone outline is inside and other zone, if its priority is higher
// the other zone priority, it will be created inside.
// if priorities are equal, a DRC error is set
unsigned m_priority;
ZoneConnection m_PadConnection;
public:
ZONE_CONTAINER( BOARD* parent );
ZONE_CONTAINER( const ZONE_CONTAINER& aZone );
......@@ -257,13 +206,13 @@ public:
* returns the net name.
* @return const wxString& - The net name.
*/
const wxString& GetNetName() const { return m_Netname; };
void SetNetName( const wxString& aName ) { m_Netname = aName; }
const wxString& GetNetName() const { return m_Netname; };
void SetNetName( const wxString& aName ) { m_Netname = aName; }
void SetFillMode( int aFillMode ) { m_FillMode = aFillMode; }
int GetFillMode() const { return m_FillMode; }
void SetFillMode( int aFillMode ) { m_FillMode = aFillMode; }
int GetFillMode() const { return m_FillMode; }
void SetThermalReliefGap( int aThermalReliefGap ) { m_ThermalReliefGap = aThermalReliefGap; }
void SetThermalReliefGap( int aThermalReliefGap ) { m_ThermalReliefGap = aThermalReliefGap; }
int GetThermalReliefGap( D_PAD* aPad = NULL ) const;
void SetThermalReliefCopperBridge( int aThermalReliefCopperBridge )
......@@ -547,6 +496,59 @@ public:
#if defined(DEBUG)
void Show( int nestLevel, std::ostream& os ) const { ShowDummy( os ); } // override
#endif
CPolyLine* m_Poly; // outlines
// For corner moving, corner index to drag, or -1 if no selection.
int m_CornerSelection;
int m_ZoneClearance; // clearance value
int m_ZoneMinThickness; // Min thickness value in filled areas
// How to fill areas: 0 = use filled polygons, != 0 fill with segments.
int m_FillMode;
// number of segments to convert a circle to a polygon (uses
//ARC_APPROX_SEGMENTS_COUNT_LOW_DEF or ARC_APPROX_SEGMENTS_COUNT_HIGHT_DEF)
int m_ArcToSegmentsCount;
// thickness of the gap in thermal reliefs.
int m_ThermalReliefGap;
// thickness of the copper bridge in thermal reliefs
int m_ThermalReliefCopperBridge;
int utility, utility2; // flags used in polygon calculations
// true when a zone was filled, false after deleting the filled areas
bool m_IsFilled;
/* set of filled polygons used to draw a zone as a filled area.
* from outlines (m_Poly) but unlike m_Poly these filled polygons have no hole
* (they are* all in one piece) In very simple cases m_FilledPolysList is same
* as m_Poly. In less simple cases (when m_Poly has holes) m_FilledPolysList is
* a polygon equivalent to m_Poly, without holes but with extra outline segment
* connecting "holes" with external main outline. In complex cases an outline
* described by m_Poly can have many filled areas
*/
std::vector <CPolyPt> m_FilledPolysList;
/* set of segments used to fill area, when fill zone by segment is used.
* ( m_FillMode == 1 )
* in this case segments have m_ZoneMinThickness width
*/
std::vector <SEGMENT> m_FillSegmList;
private:
wxString m_Netname; // Net Name
CPolyLine* smoothedPoly; // Corner-smoothed version of m_Poly
int cornerSmoothingType;
unsigned int cornerRadius;
// Priority: when a zone outline is inside and other zone, if its priority is higher
// the other zone priority, it will be created inside.
// if priorities are equal, a DRC error is set
unsigned m_priority;
ZoneConnection m_PadConnection;
};
......
......@@ -56,9 +56,6 @@ private:
wxListView* m_LayerSelectionCtrl;
static wxPoint prevPosition; ///< Dialog position & size
static wxSize prevSize;
/**
* Function initDialog
* fills in the dialog controls using the current settings.
......@@ -108,8 +105,6 @@ private:
// Initialize static member variables
wxString DIALOG_COPPER_ZONE::m_netNameShowFilter( wxT( "*" ) );
wxPoint DIALOG_COPPER_ZONE::prevPosition( -1, -1 );
wxSize DIALOG_COPPER_ZONE::prevSize;
ZONE_EDIT_T InvokeCopperZonesEditor( PCB_BASE_FRAME* aCaller, ZONE_SETTINGS* aSettings )
......@@ -157,11 +152,7 @@ DIALOG_COPPER_ZONE::DIALOG_COPPER_ZONE( PCB_BASE_FRAME* aParent, ZONE_SETTINGS*
GetSizer()->SetSizeHints( this );
if( prevPosition.x != -1 )
SetSize( prevPosition.x, prevPosition.y,
prevSize.x, prevSize.y );
else
Center();
Center();
}
......@@ -169,8 +160,6 @@ void DIALOG_COPPER_ZONE::initDialog()
{
BOARD* board = m_Parent->GetBoard();
SetFocus(); // Required under wxGTK if we want to demiss the dialog with the ESC key
wxString msg;
if( m_settings.m_Zone_45_Only )
......@@ -297,8 +286,6 @@ void DIALOG_COPPER_ZONE::OnButtonCancelClick( wxCommandEvent& event )
void DIALOG_COPPER_ZONE::OnButtonOkClick( wxCommandEvent& event )
{
m_netNameShowFilter = m_ShowNetNameFilter->GetValue();
prevPosition = GetPosition();
prevSize = GetSize();
if( AcceptOptions( true ) )
{
......@@ -311,9 +298,6 @@ void DIALOG_COPPER_ZONE::OnButtonOkClick( wxCommandEvent& event )
// called on system close button
void DIALOG_COPPER_ZONE::OnClose( wxCloseEvent& event )
{
prevPosition = GetPosition();
prevSize = GetSize();
if( m_OnExitCode != ZONE_ABORT )
*m_ptr = m_settings;
......@@ -384,7 +368,7 @@ bool DIALOG_COPPER_ZONE::AcceptOptions( bool aPromptForErrors, bool aUseExportab
wxString txtvalue = m_ZoneClearanceCtrl->GetValue();
m_settings.m_ZoneClearance = ReturnValueFromString( g_UserUnit, txtvalue );
// Test if this is a reasonnable value for this parameter
// Test if this is a reasonable value for this parameter
// A too large value can hang Pcbnew
#define CLEARANCE_MAX_VALUE 5000 // in 1/10000 inch
if( m_settings.m_ZoneClearance > CLEARANCE_MAX_VALUE )
......@@ -519,9 +503,6 @@ void DIALOG_COPPER_ZONE::OnNetSortingOptionSelected( wxCommandEvent& event )
void DIALOG_COPPER_ZONE::ExportSetupToOtherCopperZones( wxCommandEvent& event )
{
prevPosition = GetPosition();
prevSize = GetSize();
if( !AcceptOptions( true, true ) )
return;
......
///////////////////////////////////////////////////////////////////////////
// C++ code generated with wxFormBuilder (version Jun 30 2011)
// http://www.wxformbuilder.org/
//
// PLEASE DO "NOT" EDIT THIS FILE!
///////////////////////////////////////////////////////////////////////////
#include "dialog_copper_zones_base.h"
///////////////////////////////////////////////////////////////////////////
BEGIN_EVENT_TABLE( DIALOG_COPPER_ZONE_BASE, wxDialog )
EVT_CLOSE( DIALOG_COPPER_ZONE_BASE::_wxFB_OnClose )
EVT_SIZE( DIALOG_COPPER_ZONE_BASE::_wxFB_OnSize )
EVT_CHOICE( ID_M_NETDISPLAYOPTION, DIALOG_COPPER_ZONE_BASE::_wxFB_OnNetSortingOptionSelected )
EVT_TEXT_ENTER( ID_TEXTCTRL_NETNAMES_FILTER, DIALOG_COPPER_ZONE_BASE::_wxFB_OnRunFiltersButtonClick )
EVT_TEXT_ENTER( ID_TEXTCTRL_NETNAMES_FILTER, DIALOG_COPPER_ZONE_BASE::_wxFB_OnRunFiltersButtonClick )
EVT_BUTTON( wxID_APPLY_FILTERS, DIALOG_COPPER_ZONE_BASE::_wxFB_OnRunFiltersButtonClick )
EVT_CHOICE( ID_CORNER_SMOOTHING, DIALOG_COPPER_ZONE_BASE::_wxFB_OnCornerSmoothingModeChoice )
EVT_CHOICE( ID_M_PADINZONEOPT, DIALOG_COPPER_ZONE_BASE::_wxFB_OnPadsInZoneClick )
EVT_BUTTON( wxID_BUTTON_EXPORT, DIALOG_COPPER_ZONE_BASE::_wxFB_ExportSetupToOtherCopperZones )
EVT_BUTTON( wxID_OK, DIALOG_COPPER_ZONE_BASE::_wxFB_OnButtonOkClick )
EVT_BUTTON( wxID_CANCEL, DIALOG_COPPER_ZONE_BASE::_wxFB_OnButtonCancelClick )
END_EVENT_TABLE()
DIALOG_COPPER_ZONE_BASE::DIALOG_COPPER_ZONE_BASE( wxWindow* parent, wxWindowID id, const wxString& title, const wxPoint& pos, const wxSize& size, long style ) : wxDialog( parent, id, title, pos, size, style )
{
this->SetSizeHints( wxDefaultSize, wxDefaultSize );
m_MainBoxSizer = new wxBoxSizer( wxVERTICAL );
wxBoxSizer* m_OptionsBoxSizer;
m_OptionsBoxSizer = new wxBoxSizer( wxHORIZONTAL );
m_layerSizer = new wxBoxSizer( wxVERTICAL );
m_staticText17 = new wxStaticText( this, wxID_ANY, _("Layer:"), wxDefaultPosition, wxDefaultSize, 0 );
m_staticText17->Wrap( -1 );
m_layerSizer->Add( m_staticText17, 0, wxLEFT|wxRIGHT|wxTOP, 5 );
m_OptionsBoxSizer->Add( m_layerSizer, 1, wxEXPAND, 5 );
wxBoxSizer* bSizer7;
bSizer7 = new wxBoxSizer( wxVERTICAL );
m_staticText2 = new wxStaticText( this, wxID_ANY, _("Net:"), wxDefaultPosition, wxDefaultSize, 0 );
m_staticText2->Wrap( -1 );
bSizer7->Add( m_staticText2, 0, wxTOP|wxRIGHT|wxLEFT, 5 );
m_ListNetNameSelection = new wxListBox( this, ID_NETNAME_SELECTION, wxDefaultPosition, wxDefaultSize, 0, NULL, 0 );
bSizer7->Add( m_ListNetNameSelection, 1, wxEXPAND|wxBOTTOM|wxRIGHT|wxLEFT, 5 );
m_OptionsBoxSizer->Add( bSizer7, 1, wxEXPAND, 5 );
wxStaticBoxSizer* m_NetSortOptSizer;
m_NetSortOptSizer = new wxStaticBoxSizer( new wxStaticBox( this, wxID_ANY, _("Net Filtering") ), wxVERTICAL );
m_staticText16 = new wxStaticText( this, wxID_ANY, _("Display:"), wxDefaultPosition, wxDefaultSize, 0 );
m_staticText16->Wrap( -1 );
m_NetSortOptSizer->Add( m_staticText16, 0, wxLEFT|wxRIGHT|wxTOP, 5 );
wxString m_NetDisplayOptionChoices[] = { _("Show all (alphabetical)"), _("Show all (advanced)"), _("Filtered (alphabetical)"), _("Filtered (advanced)") };
int m_NetDisplayOptionNChoices = sizeof( m_NetDisplayOptionChoices ) / sizeof( wxString );
m_NetDisplayOption = new wxChoice( this, ID_M_NETDISPLAYOPTION, wxDefaultPosition, wxDefaultSize, m_NetDisplayOptionNChoices, m_NetDisplayOptionChoices, 0 );
m_NetDisplayOption->SetSelection( 0 );
m_NetSortOptSizer->Add( m_NetDisplayOption, 0, wxBOTTOM|wxEXPAND|wxLEFT|wxRIGHT, 5 );
m_staticText5 = new wxStaticText( this, wxID_ANY, _("Hidden net filter:"), wxDefaultPosition, wxDefaultSize, 0 );
m_staticText5->Wrap( -1 );
m_NetSortOptSizer->Add( m_staticText5, 0, wxTOP|wxRIGHT|wxLEFT, 5 );
m_DoNotShowNetNameFilter = new wxTextCtrl( this, ID_TEXTCTRL_NETNAMES_FILTER, wxEmptyString, wxDefaultPosition, wxDefaultSize, wxTE_PROCESS_ENTER );
m_DoNotShowNetNameFilter->SetToolTip( _("Pattern to filter net names in filtered list.\nNet names matching this pattern are not displayed.") );
m_NetSortOptSizer->Add( m_DoNotShowNetNameFilter, 0, wxEXPAND|wxBOTTOM|wxRIGHT|wxLEFT, 5 );
m_staticText51 = new wxStaticText( this, wxID_ANY, _("Visible net filter:"), wxDefaultPosition, wxDefaultSize, 0 );
m_staticText51->Wrap( -1 );
m_NetSortOptSizer->Add( m_staticText51, 0, wxTOP|wxRIGHT|wxLEFT, 5 );
m_ShowNetNameFilter = new wxTextCtrl( this, ID_TEXTCTRL_NETNAMES_FILTER, _("*"), wxDefaultPosition, wxDefaultSize, wxTE_PROCESS_ENTER );
m_ShowNetNameFilter->SetToolTip( _("Pattern to filter net names in filtered list.\nOnly net names matching this pattern are displayed.") );
m_NetSortOptSizer->Add( m_ShowNetNameFilter, 0, wxBOTTOM|wxRIGHT|wxLEFT|wxEXPAND, 5 );
m_buttonRunFilter = new wxButton( this, wxID_APPLY_FILTERS, _("Apply Filters"), wxDefaultPosition, wxDefaultSize, 0 );
m_NetSortOptSizer->Add( m_buttonRunFilter, 0, wxALL|wxEXPAND, 5 );
m_OptionsBoxSizer->Add( m_NetSortOptSizer, 0, wxALL, 5 );
m_MainBoxSizer->Add( m_OptionsBoxSizer, 1, wxALL|wxEXPAND, 5 );
wxStaticBoxSizer* m_ExportableSetupSizer;
m_ExportableSetupSizer = new wxStaticBoxSizer( new wxStaticBox( this, wxID_ANY, _("Settings") ), wxHORIZONTAL );
wxBoxSizer* bSizer9;
bSizer9 = new wxBoxSizer( wxVERTICAL );
m_ClearanceValueTitle = new wxStaticText( this, wxID_ANY, _("Clearance"), wxDefaultPosition, wxDefaultSize, 0 );
m_ClearanceValueTitle->Wrap( -1 );
bSizer9->Add( m_ClearanceValueTitle, 0, wxTOP|wxRIGHT|wxLEFT, 5 );
m_ZoneClearanceCtrl = new wxTextCtrl( this, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
bSizer9->Add( m_ZoneClearanceCtrl, 0, wxEXPAND|wxBOTTOM|wxRIGHT|wxLEFT, 5 );
m_MinThicknessValueTitle = new wxStaticText( this, wxID_ANY, _("Minimum width"), wxDefaultPosition, wxDefaultSize, 0 );
m_MinThicknessValueTitle->Wrap( -1 );
m_MinThicknessValueTitle->SetToolTip( _("Minimun thickness of filled areas.") );
bSizer9->Add( m_MinThicknessValueTitle, 0, wxTOP|wxRIGHT|wxLEFT, 5 );
m_ZoneMinThicknessCtrl = new wxTextCtrl( this, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
bSizer9->Add( m_ZoneMinThicknessCtrl, 0, wxEXPAND|wxBOTTOM|wxRIGHT|wxLEFT, 5 );
m_staticText151 = new wxStaticText( this, wxID_ANY, _("Corner smoothing:"), wxDefaultPosition, wxDefaultSize, 0 );
m_staticText151->Wrap( -1 );
bSizer9->Add( m_staticText151, 0, wxLEFT|wxRIGHT|wxTOP, 5 );
wxString m_cornerSmoothingChoiceChoices[] = { _("None"), _("Chamfer"), _("Fillet") };
int m_cornerSmoothingChoiceNChoices = sizeof( m_cornerSmoothingChoiceChoices ) / sizeof( wxString );
m_cornerSmoothingChoice = new wxChoice( this, ID_CORNER_SMOOTHING, wxDefaultPosition, wxDefaultSize, m_cornerSmoothingChoiceNChoices, m_cornerSmoothingChoiceChoices, 0 );
m_cornerSmoothingChoice->SetSelection( 0 );
bSizer9->Add( m_cornerSmoothingChoice, 0, wxBOTTOM|wxEXPAND|wxLEFT|wxRIGHT, 5 );
m_cornerSmoothingTitle = new wxStaticText( this, wxID_ANY, _("Chamfer distance (mm):"), wxDefaultPosition, wxDefaultSize, 0 );
m_cornerSmoothingTitle->Wrap( -1 );
bSizer9->Add( m_cornerSmoothingTitle, 0, wxLEFT|wxRIGHT|wxTOP, 5 );
m_cornerSmoothingCtrl = new wxTextCtrl( this, ID_M_CORNERSMOOTHINGCTRL, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
bSizer9->Add( m_cornerSmoothingCtrl, 0, wxBOTTOM|wxEXPAND|wxLEFT|wxRIGHT, 5 );
m_ExportableSetupSizer->Add( bSizer9, 0, wxEXPAND, 5 );
wxBoxSizer* m_LeftBox;
m_LeftBox = new wxBoxSizer( wxVERTICAL );
m_staticText13 = new wxStaticText( this, wxID_ANY, _("Pad connection:"), wxDefaultPosition, wxDefaultSize, 0 );
m_staticText13->Wrap( -1 );
m_LeftBox->Add( m_staticText13, 0, wxLEFT|wxRIGHT|wxTOP, 5 );
wxString m_PadInZoneOptChoices[] = { _("Solid"), _("Thermal relief"), _("None") };
int m_PadInZoneOptNChoices = sizeof( m_PadInZoneOptChoices ) / sizeof( wxString );
m_PadInZoneOpt = new wxChoice( this, ID_M_PADINZONEOPT, wxDefaultPosition, wxDefaultSize, m_PadInZoneOptNChoices, m_PadInZoneOptChoices, 0 );
m_PadInZoneOpt->SetSelection( 0 );
m_LeftBox->Add( m_PadInZoneOpt, 0, wxBOTTOM|wxEXPAND|wxLEFT|wxRIGHT, 5 );
wxStaticBoxSizer* m_ThermalShapesParamsSizer;
m_ThermalShapesParamsSizer = new wxStaticBoxSizer( new wxStaticBox( this, wxID_ANY, _("Thermal Reliefs") ), wxVERTICAL );
m_AntipadSizeText = new wxStaticText( this, wxID_ANY, _("Antipad clearance"), wxDefaultPosition, wxDefaultSize, 0 );
m_AntipadSizeText->Wrap( -1 );
m_ThermalShapesParamsSizer->Add( m_AntipadSizeText, 0, wxLEFT|wxRIGHT|wxTOP, 5 );
m_AntipadSizeValue = new wxTextCtrl( this, wxID_ANTIPAD_SIZE, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
m_AntipadSizeValue->SetToolTip( _("Clearance between pads in the same net and filled areas.") );
m_ThermalShapesParamsSizer->Add( m_AntipadSizeValue, 0, wxBOTTOM|wxEXPAND|wxLEFT|wxRIGHT, 5 );
m_CopperBridgeWidthText = new wxStaticText( this, wxID_ANY, _("Spoke width"), wxDefaultPosition, wxDefaultSize, 0 );
m_CopperBridgeWidthText->Wrap( -1 );
m_ThermalShapesParamsSizer->Add( m_CopperBridgeWidthText, 0, wxTOP|wxRIGHT|wxLEFT, 5 );
m_CopperWidthValue = new wxTextCtrl( this, wxID_COPPER_BRIDGE_VALUE, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
m_CopperWidthValue->SetToolTip( _("Width of copper in thermal reliefs.") );
m_ThermalShapesParamsSizer->Add( m_CopperWidthValue, 0, wxBOTTOM|wxEXPAND|wxLEFT|wxRIGHT, 5 );
m_LeftBox->Add( m_ThermalShapesParamsSizer, 0, wxALL|wxEXPAND, 5 );
m_ExportableSetupSizer->Add( m_LeftBox, 0, wxEXPAND, 5 );
wxBoxSizer* m_MiddleBox;
m_MiddleBox = new wxBoxSizer( wxVERTICAL );
m_staticText171 = new wxStaticText( this, wxID_ANY, _("Priority level:"), wxDefaultPosition, wxDefaultSize, 0 );
m_staticText171->Wrap( -1 );
m_staticText171->SetToolTip( _("On each copper layer, zones are filled by priority order.\nSo when a zone is inside an other zone:\n* If its priority is highter: its outlines are removed from the other layer.\n* If its priority is equal: a DRC error is set.") );
m_MiddleBox->Add( m_staticText171, 0, wxRIGHT|wxLEFT, 5 );
m_PriorityLevelCtrl = new wxSpinCtrl( this, ID_M_PRIORITYLEVELCTRL, wxEmptyString, wxDefaultPosition, wxDefaultSize, wxSP_ARROW_KEYS, 0, 100, 0 );
m_MiddleBox->Add( m_PriorityLevelCtrl, 0, wxBOTTOM|wxRIGHT|wxLEFT, 5 );
m_staticText11 = new wxStaticText( this, wxID_ANY, _("Fill mode:"), wxDefaultPosition, wxDefaultSize, 0 );
m_staticText11->Wrap( -1 );
m_MiddleBox->Add( m_staticText11, 0, wxLEFT|wxRIGHT|wxTOP, 5 );
wxString m_FillModeCtrlChoices[] = { _("Polygon"), _("Segment") };
int m_FillModeCtrlNChoices = sizeof( m_FillModeCtrlChoices ) / sizeof( wxString );
m_FillModeCtrl = new wxChoice( this, ID_M_FILLMODECTRL, wxDefaultPosition, wxDefaultSize, m_FillModeCtrlNChoices, m_FillModeCtrlChoices, 0 );
m_FillModeCtrl->SetSelection( 0 );
m_MiddleBox->Add( m_FillModeCtrl, 0, wxBOTTOM|wxEXPAND|wxLEFT|wxRIGHT, 5 );
m_staticText12 = new wxStaticText( this, wxID_ANY, _("Segments / 360 deg:"), wxDefaultPosition, wxDefaultSize, 0 );
m_staticText12->Wrap( -1 );
m_MiddleBox->Add( m_staticText12, 0, wxLEFT|wxRIGHT|wxTOP, 5 );
wxString m_ArcApproximationOptChoices[] = { _("16"), _("32") };
int m_ArcApproximationOptNChoices = sizeof( m_ArcApproximationOptChoices ) / sizeof( wxString );
m_ArcApproximationOpt = new wxChoice( this, ID_M_ARCAPPROXIMATIONOPT, wxDefaultPosition, wxDefaultSize, m_ArcApproximationOptNChoices, m_ArcApproximationOptChoices, 0 );
m_ArcApproximationOpt->SetSelection( 0 );
m_MiddleBox->Add( m_ArcApproximationOpt, 0, wxBOTTOM|wxEXPAND|wxLEFT|wxRIGHT, 5 );
m_ExportableSetupSizer->Add( m_MiddleBox, 0, wxEXPAND, 5 );
wxBoxSizer* bSizer81;
bSizer81 = new wxBoxSizer( wxVERTICAL );
m_staticText14 = new wxStaticText( this, wxID_ANY, _("Outline slope:"), wxDefaultPosition, wxDefaultSize, 0 );
m_staticText14->Wrap( -1 );
bSizer81->Add( m_staticText14, 0, wxLEFT|wxRIGHT|wxTOP, 5 );
wxString m_OrientEdgesOptChoices[] = { _("Arbitrary"), _("H, V, and 45 deg only") };
int m_OrientEdgesOptNChoices = sizeof( m_OrientEdgesOptChoices ) / sizeof( wxString );
m_OrientEdgesOpt = new wxChoice( this, ID_M_ORIENTEDGESOPT, wxDefaultPosition, wxDefaultSize, m_OrientEdgesOptNChoices, m_OrientEdgesOptChoices, 0 );
m_OrientEdgesOpt->SetSelection( 0 );
bSizer81->Add( m_OrientEdgesOpt, 0, wxBOTTOM|wxEXPAND|wxLEFT|wxRIGHT, 5 );
m_staticText15 = new wxStaticText( this, wxID_ANY, _("Outline style:"), wxDefaultPosition, wxDefaultSize, 0 );
m_staticText15->Wrap( -1 );
bSizer81->Add( m_staticText15, 0, wxLEFT|wxRIGHT|wxTOP, 5 );
wxString m_OutlineAppearanceCtrlChoices[] = { _("Line"), _("Hatched"), _("Fully hatched") };
int m_OutlineAppearanceCtrlNChoices = sizeof( m_OutlineAppearanceCtrlChoices ) / sizeof( wxString );
m_OutlineAppearanceCtrl = new wxChoice( this, ID_M_OUTLINEAPPEARANCECTRL, wxDefaultPosition, wxDefaultSize, m_OutlineAppearanceCtrlNChoices, m_OutlineAppearanceCtrlChoices, 0 );
m_OutlineAppearanceCtrl->SetSelection( 0 );
bSizer81->Add( m_OutlineAppearanceCtrl, 0, wxBOTTOM|wxEXPAND|wxLEFT|wxRIGHT, 5 );
m_ExportableSetupSizer->Add( bSizer81, 0, wxEXPAND, 5 );
m_MainBoxSizer->Add( m_ExportableSetupSizer, 1, wxALL|wxEXPAND, 5 );
wxBoxSizer* bSizer10;
bSizer10 = new wxBoxSizer( wxHORIZONTAL );
m_ExportSetupButton = new wxButton( this, wxID_BUTTON_EXPORT, _("Export Settings to Other Zones"), wxDefaultPosition, wxDefaultSize, 0 );
m_ExportSetupButton->SetToolTip( _("Export this zone setup (excluding layer and net selection) to all other copper zones.") );
bSizer10->Add( m_ExportSetupButton, 0, wxALL|wxEXPAND, 5 );
m_OkButton = new wxButton( this, wxID_OK, _("Ok"), wxDefaultPosition, wxDefaultSize, 0 );
m_OkButton->SetDefault();
bSizer10->Add( m_OkButton, 0, wxALL|wxEXPAND, 5 );
m_ButtonCancel = new wxButton( this, wxID_CANCEL, _("Cancel"), wxDefaultPosition, wxDefaultSize, 0 );
bSizer10->Add( m_ButtonCancel, 0, wxALL|wxEXPAND, 5 );
m_MainBoxSizer->Add( bSizer10, 0, wxALIGN_RIGHT|wxALL, 5 );
this->SetSizer( m_MainBoxSizer );
this->Layout();
}
DIALOG_COPPER_ZONE_BASE::~DIALOG_COPPER_ZONE_BASE()
{
}
///////////////////////////////////////////////////////////////////////////
// C++ code generated with wxFormBuilder (version Apr 11 2012)
// http://www.wxformbuilder.org/
//
// PLEASE DO "NOT" EDIT THIS FILE!
///////////////////////////////////////////////////////////////////////////
#include "dialog_copper_zones_base.h"
///////////////////////////////////////////////////////////////////////////
BEGIN_EVENT_TABLE( DIALOG_COPPER_ZONE_BASE, DIALOG_SHIM )
EVT_CLOSE( DIALOG_COPPER_ZONE_BASE::_wxFB_OnClose )
EVT_SIZE( DIALOG_COPPER_ZONE_BASE::_wxFB_OnSize )
EVT_CHOICE( ID_M_NETDISPLAYOPTION, DIALOG_COPPER_ZONE_BASE::_wxFB_OnNetSortingOptionSelected )
EVT_TEXT_ENTER( ID_TEXTCTRL_NETNAMES_FILTER, DIALOG_COPPER_ZONE_BASE::_wxFB_OnRunFiltersButtonClick )
EVT_TEXT_ENTER( ID_TEXTCTRL_NETNAMES_FILTER, DIALOG_COPPER_ZONE_BASE::_wxFB_OnRunFiltersButtonClick )
EVT_BUTTON( wxID_APPLY_FILTERS, DIALOG_COPPER_ZONE_BASE::_wxFB_OnRunFiltersButtonClick )
EVT_CHOICE( ID_CORNER_SMOOTHING, DIALOG_COPPER_ZONE_BASE::_wxFB_OnCornerSmoothingModeChoice )
EVT_CHOICE( ID_M_PADINZONEOPT, DIALOG_COPPER_ZONE_BASE::_wxFB_OnPadsInZoneClick )
EVT_BUTTON( wxID_BUTTON_EXPORT, DIALOG_COPPER_ZONE_BASE::_wxFB_ExportSetupToOtherCopperZones )
EVT_BUTTON( wxID_OK, DIALOG_COPPER_ZONE_BASE::_wxFB_OnButtonOkClick )
EVT_BUTTON( wxID_CANCEL, DIALOG_COPPER_ZONE_BASE::_wxFB_OnButtonCancelClick )
END_EVENT_TABLE()
DIALOG_COPPER_ZONE_BASE::DIALOG_COPPER_ZONE_BASE( wxWindow* parent, wxWindowID id, const wxString& title, const wxPoint& pos, const wxSize& size, long style ) : DIALOG_SHIM( parent, id, title, pos, size, style )
{
this->SetSizeHints( wxDefaultSize, wxDefaultSize );
m_MainBoxSizer = new wxBoxSizer( wxVERTICAL );
wxBoxSizer* m_OptionsBoxSizer;
m_OptionsBoxSizer = new wxBoxSizer( wxHORIZONTAL );
m_layerSizer = new wxBoxSizer( wxVERTICAL );
m_staticText17 = new wxStaticText( this, wxID_ANY, _("Layer:"), wxDefaultPosition, wxDefaultSize, 0 );
m_staticText17->Wrap( -1 );
m_layerSizer->Add( m_staticText17, 0, wxLEFT|wxRIGHT|wxTOP, 5 );
m_OptionsBoxSizer->Add( m_layerSizer, 1, wxEXPAND, 5 );
wxBoxSizer* bSizer7;
bSizer7 = new wxBoxSizer( wxVERTICAL );
m_staticText2 = new wxStaticText( this, wxID_ANY, _("Net:"), wxDefaultPosition, wxDefaultSize, 0 );
m_staticText2->Wrap( -1 );
bSizer7->Add( m_staticText2, 0, wxTOP|wxRIGHT|wxLEFT, 5 );
m_ListNetNameSelection = new wxListBox( this, ID_NETNAME_SELECTION, wxDefaultPosition, wxDefaultSize, 0, NULL, 0 );
bSizer7->Add( m_ListNetNameSelection, 1, wxEXPAND|wxBOTTOM|wxRIGHT|wxLEFT, 5 );
m_OptionsBoxSizer->Add( bSizer7, 1, wxEXPAND, 5 );
wxStaticBoxSizer* m_NetSortOptSizer;
m_NetSortOptSizer = new wxStaticBoxSizer( new wxStaticBox( this, wxID_ANY, _("Net Filtering") ), wxVERTICAL );
m_staticText16 = new wxStaticText( this, wxID_ANY, _("Display:"), wxDefaultPosition, wxDefaultSize, 0 );
m_staticText16->Wrap( -1 );
m_NetSortOptSizer->Add( m_staticText16, 0, wxLEFT|wxRIGHT|wxTOP, 5 );
wxString m_NetDisplayOptionChoices[] = { _("Show all (alphabetical)"), _("Show all (advanced)"), _("Filtered (alphabetical)"), _("Filtered (advanced)") };
int m_NetDisplayOptionNChoices = sizeof( m_NetDisplayOptionChoices ) / sizeof( wxString );
m_NetDisplayOption = new wxChoice( this, ID_M_NETDISPLAYOPTION, wxDefaultPosition, wxDefaultSize, m_NetDisplayOptionNChoices, m_NetDisplayOptionChoices, 0 );
m_NetDisplayOption->SetSelection( 0 );
m_NetSortOptSizer->Add( m_NetDisplayOption, 0, wxBOTTOM|wxEXPAND|wxLEFT|wxRIGHT, 5 );
m_staticText5 = new wxStaticText( this, wxID_ANY, _("Hidden net filter:"), wxDefaultPosition, wxDefaultSize, 0 );
m_staticText5->Wrap( -1 );
m_NetSortOptSizer->Add( m_staticText5, 0, wxTOP|wxRIGHT|wxLEFT, 5 );
m_DoNotShowNetNameFilter = new wxTextCtrl( this, ID_TEXTCTRL_NETNAMES_FILTER, wxEmptyString, wxDefaultPosition, wxDefaultSize, wxTE_PROCESS_ENTER );
m_DoNotShowNetNameFilter->SetToolTip( _("Pattern to filter net names in filtered list.\nNet names matching this pattern are not displayed.") );
m_NetSortOptSizer->Add( m_DoNotShowNetNameFilter, 0, wxEXPAND|wxBOTTOM|wxRIGHT|wxLEFT, 5 );
m_staticText51 = new wxStaticText( this, wxID_ANY, _("Visible net filter:"), wxDefaultPosition, wxDefaultSize, 0 );
m_staticText51->Wrap( -1 );
m_NetSortOptSizer->Add( m_staticText51, 0, wxTOP|wxRIGHT|wxLEFT, 5 );
m_ShowNetNameFilter = new wxTextCtrl( this, ID_TEXTCTRL_NETNAMES_FILTER, _("*"), wxDefaultPosition, wxDefaultSize, wxTE_PROCESS_ENTER );
m_ShowNetNameFilter->SetToolTip( _("Pattern to filter net names in filtered list.\nOnly net names matching this pattern are displayed.") );
m_NetSortOptSizer->Add( m_ShowNetNameFilter, 0, wxBOTTOM|wxRIGHT|wxLEFT|wxEXPAND, 5 );
m_buttonRunFilter = new wxButton( this, wxID_APPLY_FILTERS, _("Apply Filters"), wxDefaultPosition, wxDefaultSize, 0 );
m_NetSortOptSizer->Add( m_buttonRunFilter, 0, wxALL|wxEXPAND, 5 );
m_OptionsBoxSizer->Add( m_NetSortOptSizer, 0, wxALL, 5 );
m_MainBoxSizer->Add( m_OptionsBoxSizer, 1, wxALL|wxEXPAND, 5 );
wxStaticBoxSizer* m_ExportableSetupSizer;
m_ExportableSetupSizer = new wxStaticBoxSizer( new wxStaticBox( this, wxID_ANY, _("Settings") ), wxHORIZONTAL );
wxBoxSizer* bSizer9;
bSizer9 = new wxBoxSizer( wxVERTICAL );
m_ClearanceValueTitle = new wxStaticText( this, wxID_ANY, _("Clearance"), wxDefaultPosition, wxDefaultSize, 0 );
m_ClearanceValueTitle->Wrap( -1 );
bSizer9->Add( m_ClearanceValueTitle, 0, wxTOP|wxRIGHT|wxLEFT, 5 );
m_ZoneClearanceCtrl = new wxTextCtrl( this, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
bSizer9->Add( m_ZoneClearanceCtrl, 0, wxEXPAND|wxBOTTOM|wxRIGHT|wxLEFT, 5 );
m_MinThicknessValueTitle = new wxStaticText( this, wxID_ANY, _("Minimum width"), wxDefaultPosition, wxDefaultSize, 0 );
m_MinThicknessValueTitle->Wrap( -1 );
m_MinThicknessValueTitle->SetToolTip( _("Minimun thickness of filled areas.") );
bSizer9->Add( m_MinThicknessValueTitle, 0, wxTOP|wxRIGHT|wxLEFT, 5 );
m_ZoneMinThicknessCtrl = new wxTextCtrl( this, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
bSizer9->Add( m_ZoneMinThicknessCtrl, 0, wxEXPAND|wxBOTTOM|wxRIGHT|wxLEFT, 5 );
m_staticText151 = new wxStaticText( this, wxID_ANY, _("Corner smoothing:"), wxDefaultPosition, wxDefaultSize, 0 );
m_staticText151->Wrap( -1 );
bSizer9->Add( m_staticText151, 0, wxLEFT|wxRIGHT|wxTOP, 5 );
wxString m_cornerSmoothingChoiceChoices[] = { _("None"), _("Chamfer"), _("Fillet") };
int m_cornerSmoothingChoiceNChoices = sizeof( m_cornerSmoothingChoiceChoices ) / sizeof( wxString );
m_cornerSmoothingChoice = new wxChoice( this, ID_CORNER_SMOOTHING, wxDefaultPosition, wxDefaultSize, m_cornerSmoothingChoiceNChoices, m_cornerSmoothingChoiceChoices, 0 );
m_cornerSmoothingChoice->SetSelection( 0 );
bSizer9->Add( m_cornerSmoothingChoice, 0, wxBOTTOM|wxEXPAND|wxLEFT|wxRIGHT, 5 );
m_cornerSmoothingTitle = new wxStaticText( this, wxID_ANY, _("Chamfer distance (mm):"), wxDefaultPosition, wxDefaultSize, 0 );
m_cornerSmoothingTitle->Wrap( -1 );
bSizer9->Add( m_cornerSmoothingTitle, 0, wxLEFT|wxRIGHT|wxTOP, 5 );
m_cornerSmoothingCtrl = new wxTextCtrl( this, ID_M_CORNERSMOOTHINGCTRL, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
bSizer9->Add( m_cornerSmoothingCtrl, 0, wxBOTTOM|wxEXPAND|wxLEFT|wxRIGHT, 5 );
m_ExportableSetupSizer->Add( bSizer9, 0, wxEXPAND, 5 );
wxBoxSizer* m_LeftBox;
m_LeftBox = new wxBoxSizer( wxVERTICAL );
m_staticText13 = new wxStaticText( this, wxID_ANY, _("Pad connection:"), wxDefaultPosition, wxDefaultSize, 0 );
m_staticText13->Wrap( -1 );
m_LeftBox->Add( m_staticText13, 0, wxLEFT|wxRIGHT|wxTOP, 5 );
wxString m_PadInZoneOptChoices[] = { _("Solid"), _("Thermal relief"), _("None") };
int m_PadInZoneOptNChoices = sizeof( m_PadInZoneOptChoices ) / sizeof( wxString );
m_PadInZoneOpt = new wxChoice( this, ID_M_PADINZONEOPT, wxDefaultPosition, wxDefaultSize, m_PadInZoneOptNChoices, m_PadInZoneOptChoices, 0 );
m_PadInZoneOpt->SetSelection( 0 );
m_LeftBox->Add( m_PadInZoneOpt, 0, wxBOTTOM|wxEXPAND|wxLEFT|wxRIGHT, 5 );
wxStaticBoxSizer* m_ThermalShapesParamsSizer;
m_ThermalShapesParamsSizer = new wxStaticBoxSizer( new wxStaticBox( this, wxID_ANY, _("Thermal Reliefs") ), wxVERTICAL );
m_AntipadSizeText = new wxStaticText( this, wxID_ANY, _("Antipad clearance"), wxDefaultPosition, wxDefaultSize, 0 );
m_AntipadSizeText->Wrap( -1 );
m_ThermalShapesParamsSizer->Add( m_AntipadSizeText, 0, wxLEFT|wxRIGHT|wxTOP, 5 );
m_AntipadSizeValue = new wxTextCtrl( this, wxID_ANTIPAD_SIZE, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
m_AntipadSizeValue->SetToolTip( _("Clearance between pads in the same net and filled areas.") );
m_ThermalShapesParamsSizer->Add( m_AntipadSizeValue, 0, wxBOTTOM|wxEXPAND|wxLEFT|wxRIGHT, 5 );
m_CopperBridgeWidthText = new wxStaticText( this, wxID_ANY, _("Spoke width"), wxDefaultPosition, wxDefaultSize, 0 );
m_CopperBridgeWidthText->Wrap( -1 );
m_ThermalShapesParamsSizer->Add( m_CopperBridgeWidthText, 0, wxTOP|wxRIGHT|wxLEFT, 5 );
m_CopperWidthValue = new wxTextCtrl( this, wxID_COPPER_BRIDGE_VALUE, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
m_CopperWidthValue->SetToolTip( _("Width of copper in thermal reliefs.") );
m_ThermalShapesParamsSizer->Add( m_CopperWidthValue, 0, wxBOTTOM|wxEXPAND|wxLEFT|wxRIGHT, 5 );
m_LeftBox->Add( m_ThermalShapesParamsSizer, 0, wxALL|wxEXPAND, 5 );
m_ExportableSetupSizer->Add( m_LeftBox, 0, wxEXPAND, 5 );
wxBoxSizer* m_MiddleBox;
m_MiddleBox = new wxBoxSizer( wxVERTICAL );
m_staticText171 = new wxStaticText( this, wxID_ANY, _("Priority level:"), wxDefaultPosition, wxDefaultSize, 0 );
m_staticText171->Wrap( -1 );
m_staticText171->SetToolTip( _("On each copper layer, zones are filled by priority order.\nSo when a zone is inside an other zone:\n* If its priority is highter: its outlines are removed from the other layer.\n* If its priority is equal: a DRC error is set.") );
m_MiddleBox->Add( m_staticText171, 0, wxRIGHT|wxLEFT, 5 );
m_PriorityLevelCtrl = new wxSpinCtrl( this, ID_M_PRIORITYLEVELCTRL, wxEmptyString, wxDefaultPosition, wxDefaultSize, wxSP_ARROW_KEYS, 0, 100, 0 );
m_MiddleBox->Add( m_PriorityLevelCtrl, 0, wxBOTTOM|wxRIGHT|wxLEFT, 5 );
m_staticText11 = new wxStaticText( this, wxID_ANY, _("Fill mode:"), wxDefaultPosition, wxDefaultSize, 0 );
m_staticText11->Wrap( -1 );
m_MiddleBox->Add( m_staticText11, 0, wxLEFT|wxRIGHT|wxTOP, 5 );
wxString m_FillModeCtrlChoices[] = { _("Polygon"), _("Segment") };
int m_FillModeCtrlNChoices = sizeof( m_FillModeCtrlChoices ) / sizeof( wxString );
m_FillModeCtrl = new wxChoice( this, ID_M_FILLMODECTRL, wxDefaultPosition, wxDefaultSize, m_FillModeCtrlNChoices, m_FillModeCtrlChoices, 0 );
m_FillModeCtrl->SetSelection( 0 );
m_MiddleBox->Add( m_FillModeCtrl, 0, wxBOTTOM|wxEXPAND|wxLEFT|wxRIGHT, 5 );
m_staticText12 = new wxStaticText( this, wxID_ANY, _("Segments / 360 deg:"), wxDefaultPosition, wxDefaultSize, 0 );
m_staticText12->Wrap( -1 );
m_MiddleBox->Add( m_staticText12, 0, wxLEFT|wxRIGHT|wxTOP, 5 );
wxString m_ArcApproximationOptChoices[] = { _("16"), _("32") };
int m_ArcApproximationOptNChoices = sizeof( m_ArcApproximationOptChoices ) / sizeof( wxString );
m_ArcApproximationOpt = new wxChoice( this, ID_M_ARCAPPROXIMATIONOPT, wxDefaultPosition, wxDefaultSize, m_ArcApproximationOptNChoices, m_ArcApproximationOptChoices, 0 );
m_ArcApproximationOpt->SetSelection( 0 );
m_MiddleBox->Add( m_ArcApproximationOpt, 0, wxBOTTOM|wxEXPAND|wxLEFT|wxRIGHT, 5 );
m_ExportableSetupSizer->Add( m_MiddleBox, 0, wxEXPAND, 5 );
wxBoxSizer* bSizer81;
bSizer81 = new wxBoxSizer( wxVERTICAL );
m_staticText14 = new wxStaticText( this, wxID_ANY, _("Outline slope:"), wxDefaultPosition, wxDefaultSize, 0 );
m_staticText14->Wrap( -1 );
bSizer81->Add( m_staticText14, 0, wxLEFT|wxRIGHT|wxTOP, 5 );
wxString m_OrientEdgesOptChoices[] = { _("Arbitrary"), _("H, V, and 45 deg only") };
int m_OrientEdgesOptNChoices = sizeof( m_OrientEdgesOptChoices ) / sizeof( wxString );
m_OrientEdgesOpt = new wxChoice( this, ID_M_ORIENTEDGESOPT, wxDefaultPosition, wxDefaultSize, m_OrientEdgesOptNChoices, m_OrientEdgesOptChoices, 0 );
m_OrientEdgesOpt->SetSelection( 0 );
bSizer81->Add( m_OrientEdgesOpt, 0, wxBOTTOM|wxEXPAND|wxLEFT|wxRIGHT, 5 );
m_staticText15 = new wxStaticText( this, wxID_ANY, _("Outline style:"), wxDefaultPosition, wxDefaultSize, 0 );
m_staticText15->Wrap( -1 );
bSizer81->Add( m_staticText15, 0, wxLEFT|wxRIGHT|wxTOP, 5 );
wxString m_OutlineAppearanceCtrlChoices[] = { _("Line"), _("Hatched"), _("Fully hatched") };
int m_OutlineAppearanceCtrlNChoices = sizeof( m_OutlineAppearanceCtrlChoices ) / sizeof( wxString );
m_OutlineAppearanceCtrl = new wxChoice( this, ID_M_OUTLINEAPPEARANCECTRL, wxDefaultPosition, wxDefaultSize, m_OutlineAppearanceCtrlNChoices, m_OutlineAppearanceCtrlChoices, 0 );
m_OutlineAppearanceCtrl->SetSelection( 0 );
bSizer81->Add( m_OutlineAppearanceCtrl, 0, wxBOTTOM|wxEXPAND|wxLEFT|wxRIGHT, 5 );
m_ExportableSetupSizer->Add( bSizer81, 0, wxEXPAND, 5 );
m_MainBoxSizer->Add( m_ExportableSetupSizer, 1, wxALL|wxEXPAND, 5 );
wxBoxSizer* bSizer10;
bSizer10 = new wxBoxSizer( wxHORIZONTAL );
m_ExportSetupButton = new wxButton( this, wxID_BUTTON_EXPORT, _("Export Settings to Other Zones"), wxDefaultPosition, wxDefaultSize, 0 );
m_ExportSetupButton->SetToolTip( _("Export this zone setup (excluding layer and net selection) to all other copper zones.") );
bSizer10->Add( m_ExportSetupButton, 0, wxALL|wxEXPAND, 5 );
m_OkButton = new wxButton( this, wxID_OK, _("Ok"), wxDefaultPosition, wxDefaultSize, 0 );
m_OkButton->SetDefault();
bSizer10->Add( m_OkButton, 0, wxALL|wxEXPAND, 5 );
m_ButtonCancel = new wxButton( this, wxID_CANCEL, _("Cancel"), wxDefaultPosition, wxDefaultSize, 0 );
bSizer10->Add( m_ButtonCancel, 0, wxALL|wxEXPAND, 5 );
m_MainBoxSizer->Add( bSizer10, 0, wxALIGN_RIGHT|wxALL, 5 );
this->SetSizer( m_MainBoxSizer );
this->Layout();
}
DIALOG_COPPER_ZONE_BASE::~DIALOG_COPPER_ZONE_BASE()
{
}
This source diff could not be displayed because it is too large. You can view the blob instead.
///////////////////////////////////////////////////////////////////////////
// C++ code generated with wxFormBuilder (version Jun 30 2011)
// http://www.wxformbuilder.org/
//
// PLEASE DO "NOT" EDIT THIS FILE!
///////////////////////////////////////////////////////////////////////////
#ifndef __DIALOG_COPPER_ZONES_BASE_H__
#define __DIALOG_COPPER_ZONES_BASE_H__
#include <wx/artprov.h>
#include <wx/xrc/xmlres.h>
#include <wx/intl.h>
#include <wx/string.h>
#include <wx/stattext.h>
#include <wx/gdicmn.h>
#include <wx/font.h>
#include <wx/colour.h>
#include <wx/settings.h>
#include <wx/sizer.h>
#include <wx/listbox.h>
#include <wx/choice.h>
#include <wx/textctrl.h>
#include <wx/button.h>
#include <wx/statbox.h>
#include <wx/spinctrl.h>
#include <wx/dialog.h>
///////////////////////////////////////////////////////////////////////////
///////////////////////////////////////////////////////////////////////////////
/// Class DIALOG_COPPER_ZONE_BASE
///////////////////////////////////////////////////////////////////////////////
class DIALOG_COPPER_ZONE_BASE : public wxDialog
{
DECLARE_EVENT_TABLE()
private:
// Private event handlers
void _wxFB_OnClose( wxCloseEvent& event ){ OnClose( event ); }
void _wxFB_OnSize( wxSizeEvent& event ){ OnSize( event ); }
void _wxFB_OnNetSortingOptionSelected( wxCommandEvent& event ){ OnNetSortingOptionSelected( event ); }
void _wxFB_OnRunFiltersButtonClick( wxCommandEvent& event ){ OnRunFiltersButtonClick( event ); }
void _wxFB_OnCornerSmoothingModeChoice( wxCommandEvent& event ){ OnCornerSmoothingModeChoice( event ); }
void _wxFB_OnPadsInZoneClick( wxCommandEvent& event ){ OnPadsInZoneClick( event ); }
void _wxFB_ExportSetupToOtherCopperZones( wxCommandEvent& event ){ ExportSetupToOtherCopperZones( event ); }
void _wxFB_OnButtonOkClick( wxCommandEvent& event ){ OnButtonOkClick( event ); }
void _wxFB_OnButtonCancelClick( wxCommandEvent& event ){ OnButtonCancelClick( event ); }
protected:
enum
{
ID_DIALOG_COPPER_ZONE_BASE = 1000,
ID_NETNAME_SELECTION,
ID_M_NETDISPLAYOPTION,
ID_TEXTCTRL_NETNAMES_FILTER,
wxID_APPLY_FILTERS,
ID_CORNER_SMOOTHING,
ID_M_CORNERSMOOTHINGCTRL,
ID_M_PADINZONEOPT,
wxID_ANTIPAD_SIZE,
wxID_COPPER_BRIDGE_VALUE,
ID_M_PRIORITYLEVELCTRL,
ID_M_FILLMODECTRL,
ID_M_ARCAPPROXIMATIONOPT,
ID_M_ORIENTEDGESOPT,
ID_M_OUTLINEAPPEARANCECTRL,
wxID_BUTTON_EXPORT,
};
wxBoxSizer* m_MainBoxSizer;
wxBoxSizer* m_layerSizer;
wxStaticText* m_staticText17;
wxStaticText* m_staticText2;
wxListBox* m_ListNetNameSelection;
wxStaticText* m_staticText16;
wxChoice* m_NetDisplayOption;
wxStaticText* m_staticText5;
wxTextCtrl* m_DoNotShowNetNameFilter;
wxStaticText* m_staticText51;
wxTextCtrl* m_ShowNetNameFilter;
wxButton* m_buttonRunFilter;
wxStaticText* m_ClearanceValueTitle;
wxTextCtrl* m_ZoneClearanceCtrl;
wxStaticText* m_MinThicknessValueTitle;
wxTextCtrl* m_ZoneMinThicknessCtrl;
wxStaticText* m_staticText151;
wxChoice* m_cornerSmoothingChoice;
wxStaticText* m_cornerSmoothingTitle;
wxTextCtrl* m_cornerSmoothingCtrl;
wxStaticText* m_staticText13;
wxChoice* m_PadInZoneOpt;
wxStaticText* m_AntipadSizeText;
wxTextCtrl* m_AntipadSizeValue;
wxStaticText* m_CopperBridgeWidthText;
wxTextCtrl* m_CopperWidthValue;
wxStaticText* m_staticText171;
wxSpinCtrl* m_PriorityLevelCtrl;
wxStaticText* m_staticText11;
wxChoice* m_FillModeCtrl;
wxStaticText* m_staticText12;
wxChoice* m_ArcApproximationOpt;
wxStaticText* m_staticText14;
wxChoice* m_OrientEdgesOpt;
wxStaticText* m_staticText15;
wxChoice* m_OutlineAppearanceCtrl;
wxButton* m_ExportSetupButton;
wxButton* m_OkButton;
wxButton* m_ButtonCancel;
// Virtual event handlers, overide them in your derived class
virtual void OnClose( wxCloseEvent& event ) { event.Skip(); }
virtual void OnSize( wxSizeEvent& event ) { event.Skip(); }
virtual void OnNetSortingOptionSelected( wxCommandEvent& event ) { event.Skip(); }
virtual void OnRunFiltersButtonClick( wxCommandEvent& event ) { event.Skip(); }
virtual void OnCornerSmoothingModeChoice( wxCommandEvent& event ) { event.Skip(); }
virtual void OnPadsInZoneClick( wxCommandEvent& event ) { event.Skip(); }
virtual void ExportSetupToOtherCopperZones( wxCommandEvent& event ) { event.Skip(); }
virtual void OnButtonOkClick( wxCommandEvent& event ) { event.Skip(); }
virtual void OnButtonCancelClick( wxCommandEvent& event ) { event.Skip(); }
public:
DIALOG_COPPER_ZONE_BASE( wxWindow* parent, wxWindowID id = ID_DIALOG_COPPER_ZONE_BASE, const wxString& title = _("Zone Properties"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxSize( 550,500 ), long style = wxDEFAULT_DIALOG_STYLE|wxRESIZE_BORDER );
~DIALOG_COPPER_ZONE_BASE();
};
#endif //__DIALOG_COPPER_ZONES_BASE_H__
///////////////////////////////////////////////////////////////////////////
// C++ code generated with wxFormBuilder (version Apr 11 2012)
// http://www.wxformbuilder.org/
//
// PLEASE DO "NOT" EDIT THIS FILE!
///////////////////////////////////////////////////////////////////////////
#ifndef __DIALOG_COPPER_ZONES_BASE_H__
#define __DIALOG_COPPER_ZONES_BASE_H__
#include <wx/artprov.h>
#include <wx/xrc/xmlres.h>
#include <wx/intl.h>
#include "dialog_shim.h"
#include <wx/string.h>
#include <wx/stattext.h>
#include <wx/gdicmn.h>
#include <wx/font.h>
#include <wx/colour.h>
#include <wx/settings.h>
#include <wx/sizer.h>
#include <wx/listbox.h>
#include <wx/choice.h>
#include <wx/textctrl.h>
#include <wx/button.h>
#include <wx/statbox.h>
#include <wx/spinctrl.h>
#include <wx/dialog.h>
///////////////////////////////////////////////////////////////////////////
///////////////////////////////////////////////////////////////////////////////
/// Class DIALOG_COPPER_ZONE_BASE
///////////////////////////////////////////////////////////////////////////////
class DIALOG_COPPER_ZONE_BASE : public DIALOG_SHIM
{
DECLARE_EVENT_TABLE()
private:
// Private event handlers
void _wxFB_OnClose( wxCloseEvent& event ){ OnClose( event ); }
void _wxFB_OnSize( wxSizeEvent& event ){ OnSize( event ); }
void _wxFB_OnNetSortingOptionSelected( wxCommandEvent& event ){ OnNetSortingOptionSelected( event ); }
void _wxFB_OnRunFiltersButtonClick( wxCommandEvent& event ){ OnRunFiltersButtonClick( event ); }
void _wxFB_OnCornerSmoothingModeChoice( wxCommandEvent& event ){ OnCornerSmoothingModeChoice( event ); }
void _wxFB_OnPadsInZoneClick( wxCommandEvent& event ){ OnPadsInZoneClick( event ); }
void _wxFB_ExportSetupToOtherCopperZones( wxCommandEvent& event ){ ExportSetupToOtherCopperZones( event ); }
void _wxFB_OnButtonOkClick( wxCommandEvent& event ){ OnButtonOkClick( event ); }
void _wxFB_OnButtonCancelClick( wxCommandEvent& event ){ OnButtonCancelClick( event ); }
protected:
enum
{
ID_DIALOG_COPPER_ZONE_BASE = 1000,
ID_NETNAME_SELECTION,
ID_M_NETDISPLAYOPTION,
ID_TEXTCTRL_NETNAMES_FILTER,
wxID_APPLY_FILTERS,
ID_CORNER_SMOOTHING,
ID_M_CORNERSMOOTHINGCTRL,
ID_M_PADINZONEOPT,
wxID_ANTIPAD_SIZE,
wxID_COPPER_BRIDGE_VALUE,
ID_M_PRIORITYLEVELCTRL,
ID_M_FILLMODECTRL,
ID_M_ARCAPPROXIMATIONOPT,
ID_M_ORIENTEDGESOPT,
ID_M_OUTLINEAPPEARANCECTRL,
wxID_BUTTON_EXPORT
};
wxBoxSizer* m_MainBoxSizer;
wxBoxSizer* m_layerSizer;
wxStaticText* m_staticText17;
wxStaticText* m_staticText2;
wxListBox* m_ListNetNameSelection;
wxStaticText* m_staticText16;
wxChoice* m_NetDisplayOption;
wxStaticText* m_staticText5;
wxTextCtrl* m_DoNotShowNetNameFilter;
wxStaticText* m_staticText51;
wxTextCtrl* m_ShowNetNameFilter;
wxButton* m_buttonRunFilter;
wxStaticText* m_ClearanceValueTitle;
wxTextCtrl* m_ZoneClearanceCtrl;
wxStaticText* m_MinThicknessValueTitle;
wxTextCtrl* m_ZoneMinThicknessCtrl;
wxStaticText* m_staticText151;
wxChoice* m_cornerSmoothingChoice;
wxStaticText* m_cornerSmoothingTitle;
wxTextCtrl* m_cornerSmoothingCtrl;
wxStaticText* m_staticText13;
wxChoice* m_PadInZoneOpt;
wxStaticText* m_AntipadSizeText;
wxTextCtrl* m_AntipadSizeValue;
wxStaticText* m_CopperBridgeWidthText;
wxTextCtrl* m_CopperWidthValue;
wxStaticText* m_staticText171;
wxSpinCtrl* m_PriorityLevelCtrl;
wxStaticText* m_staticText11;
wxChoice* m_FillModeCtrl;
wxStaticText* m_staticText12;
wxChoice* m_ArcApproximationOpt;
wxStaticText* m_staticText14;
wxChoice* m_OrientEdgesOpt;
wxStaticText* m_staticText15;
wxChoice* m_OutlineAppearanceCtrl;
wxButton* m_ExportSetupButton;
wxButton* m_OkButton;
wxButton* m_ButtonCancel;
// Virtual event handlers, overide them in your derived class
virtual void OnClose( wxCloseEvent& event ) { event.Skip(); }
virtual void OnSize( wxSizeEvent& event ) { event.Skip(); }
virtual void OnNetSortingOptionSelected( wxCommandEvent& event ) { event.Skip(); }
virtual void OnRunFiltersButtonClick( wxCommandEvent& event ) { event.Skip(); }
virtual void OnCornerSmoothingModeChoice( wxCommandEvent& event ) { event.Skip(); }
virtual void OnPadsInZoneClick( wxCommandEvent& event ) { event.Skip(); }
virtual void ExportSetupToOtherCopperZones( wxCommandEvent& event ) { event.Skip(); }
virtual void OnButtonOkClick( wxCommandEvent& event ) { event.Skip(); }
virtual void OnButtonCancelClick( wxCommandEvent& event ) { event.Skip(); }
public:
DIALOG_COPPER_ZONE_BASE( wxWindow* parent, wxWindowID id = ID_DIALOG_COPPER_ZONE_BASE, const wxString& title = _("Zone Properties"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxSize( 550,500 ), long style = wxDEFAULT_DIALOG_STYLE|wxRESIZE_BORDER );
~DIALOG_COPPER_ZONE_BASE();
};
#endif //__DIALOG_COPPER_ZONES_BASE_H__
///////////////////////////////////////////////////////////////////////////
// C++ code generated with wxFormBuilder (version Apr 16 2008)
// C++ code generated with wxFormBuilder (version Apr 11 2012)
// http://www.wxformbuilder.org/
//
// PLEASE DO "NOT" EDIT THIS FILE!
......@@ -9,12 +9,12 @@
///////////////////////////////////////////////////////////////////////////
BEGIN_EVENT_TABLE( DialogNonCopperZonesPropertiesBase, wxDialog )
BEGIN_EVENT_TABLE( DialogNonCopperZonesPropertiesBase, DIALOG_SHIM )
EVT_BUTTON( wxID_OK, DialogNonCopperZonesPropertiesBase::_wxFB_OnOkClick )
EVT_BUTTON( wxID_CANCEL, DialogNonCopperZonesPropertiesBase::_wxFB_OnCancelClick )
END_EVENT_TABLE()
DialogNonCopperZonesPropertiesBase::DialogNonCopperZonesPropertiesBase( wxWindow* parent, wxWindowID id, const wxString& title, const wxPoint& pos, const wxSize& size, long style ) : wxDialog( parent, id, title, pos, size, style )
DialogNonCopperZonesPropertiesBase::DialogNonCopperZonesPropertiesBase( wxWindow* parent, wxWindowID id, const wxString& title, const wxPoint& pos, const wxSize& size, long style ) : DIALOG_SHIM( parent, id, title, pos, size, style )
{
this->SetSizeHints( wxDefaultSize, wxDefaultSize );
......@@ -40,6 +40,7 @@ DialogNonCopperZonesPropertiesBase::DialogNonCopperZonesPropertiesBase( wxWindow
m_ZoneMinThicknessCtrl = new wxTextCtrl( this, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
sbLeftSizer_->Add( m_ZoneMinThicknessCtrl, 0, wxEXPAND|wxBOTTOM|wxRIGHT|wxLEFT, 5 );
m_UpperSizer->Add( sbLeftSizer_, 0, 0, 5 );
wxStaticBoxSizer* m_OutilinesBoxOpt;
......@@ -57,6 +58,7 @@ DialogNonCopperZonesPropertiesBase::DialogNonCopperZonesPropertiesBase( wxWindow
m_OutlineAppearanceCtrl->SetSelection( 1 );
m_OutilinesBoxOpt->Add( m_OutlineAppearanceCtrl, 0, wxALL|wxALIGN_CENTER_VERTICAL, 5 );
m_UpperSizer->Add( m_OutilinesBoxOpt, 0, 0, 5 );
wxBoxSizer* m_ButtonsSizer;
......@@ -69,8 +71,10 @@ DialogNonCopperZonesPropertiesBase::DialogNonCopperZonesPropertiesBase( wxWindow
m_buttonCancel = new wxButton( this, wxID_CANCEL, _("Cancel"), wxDefaultPosition, wxDefaultSize, 0 );
m_ButtonsSizer->Add( m_buttonCancel, 0, wxALL|wxALIGN_CENTER_HORIZONTAL, 5 );
m_UpperSizer->Add( m_ButtonsSizer, 1, wxALIGN_CENTER_VERTICAL, 5 );
m_MainSizer->Add( m_UpperSizer, 1, wxEXPAND|wxALIGN_CENTER_HORIZONTAL, 5 );
m_staticTextLayerSelection = new wxStaticText( this, wxID_ANY, _("Layer selection:"), wxDefaultPosition, wxDefaultSize, 0 );
......@@ -80,6 +84,7 @@ DialogNonCopperZonesPropertiesBase::DialogNonCopperZonesPropertiesBase( wxWindow
m_LayerSelectionCtrl = new wxListBox( this, wxID_ANY, wxDefaultPosition, wxDefaultSize, 0, NULL, 0 );
m_MainSizer->Add( m_LayerSelectionCtrl, 0, wxEXPAND|wxBOTTOM|wxRIGHT|wxLEFT, 5 );
this->SetSizer( m_MainSizer );
this->Layout();
......
This source diff could not be displayed because it is too large. You can view the blob instead.
///////////////////////////////////////////////////////////////////////////
// C++ code generated with wxFormBuilder (version Apr 16 2008)
// C++ code generated with wxFormBuilder (version Apr 11 2012)
// http://www.wxformbuilder.org/
//
// PLEASE DO "NOT" EDIT THIS FILE!
///////////////////////////////////////////////////////////////////////////
#ifndef __dialog_non_copper_zones_properties_base__
#define __dialog_non_copper_zones_properties_base__
#ifndef __DIALOG_NON_COPPER_ZONES_PROPERTIES_BASE_H__
#define __DIALOG_NON_COPPER_ZONES_PROPERTIES_BASE_H__
#include <wx/artprov.h>
#include <wx/xrc/xmlres.h>
#include <wx/intl.h>
#include "dialog_shim.h"
#include <wx/string.h>
#include <wx/radiobox.h>
#include <wx/gdicmn.h>
......@@ -29,7 +31,7 @@
///////////////////////////////////////////////////////////////////////////////
/// Class DialogNonCopperZonesPropertiesBase
///////////////////////////////////////////////////////////////////////////////
class DialogNonCopperZonesPropertiesBase : public wxDialog
class DialogNonCopperZonesPropertiesBase : public DIALOG_SHIM
{
DECLARE_EVENT_TABLE()
private:
......@@ -51,14 +53,15 @@ class DialogNonCopperZonesPropertiesBase : public wxDialog
wxListBox* m_LayerSelectionCtrl;
// Virtual event handlers, overide them in your derived class
virtual void OnOkClick( wxCommandEvent& event ){ event.Skip(); }
virtual void OnCancelClick( wxCommandEvent& event ){ event.Skip(); }
virtual void OnOkClick( wxCommandEvent& event ) { event.Skip(); }
virtual void OnCancelClick( wxCommandEvent& event ) { event.Skip(); }
public:
DialogNonCopperZonesPropertiesBase( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("Non Copper Zones Properties"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxSize( 416,287 ), long style = wxDEFAULT_DIALOG_STYLE|wxRESIZE_BORDER|wxFULL_REPAINT_ON_RESIZE|wxSUNKEN_BORDER );
DialogNonCopperZonesPropertiesBase( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("Non Copper Zones Properties"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxSize( 416,287 ), long style = wxDEFAULT_DIALOG_STYLE|wxRESIZE_BORDER|wxFULL_REPAINT_ON_RESIZE|wxSUNKEN_BORDER );
~DialogNonCopperZonesPropertiesBase();
};
#endif //__dialog_non_copper_zones_properties_base__
#endif //__DIALOG_NON_COPPER_ZONES_PROPERTIES_BASE_H__
......@@ -55,6 +55,8 @@ Load() TODO's
*) fix text twisting and final location issues.
*) netclass info?
*) code factoring, for polygon at least
*) zone fill clearances
*) package rectangles
*/
......@@ -92,7 +94,9 @@ typedef MODULE_MAP::const_iterator MODULE_CITER;
typedef boost::optional<std::string> opt_string;
typedef boost::optional<int> opt_int;
typedef boost::optional<double> opt_double;
typedef boost::optional<CPTREE&> opt_cptree;
typedef boost::optional<bool> opt_bool;
//typedef boost::optional<CPTREE&> opt_cptree;
/// Eagle wire
struct EWIRE
......@@ -179,9 +183,8 @@ struct ETEXT
opt_string font;
opt_double ratio;
opt_erot erot;
opt_int align;
enum {
enum { // for align
CENTER,
CENTER_LEFT,
TOP_CENTER,
......@@ -194,6 +197,78 @@ struct ETEXT
BOTTOM_LEFT = -TOP_RIGHT,
BOTTOM_RIGHT = -TOP_LEFT,
};
opt_int align;
};
/// Eagle thru hol pad
struct EPAD
{
std::string name;
double x;
double y;
double drill;
opt_double diameter;
// for shape: (square | round | octagon | long | offset)
enum {
SQUARE,
ROUND,
OCTAGON,
LONG,
OFFSET,
};
opt_int shape;
opt_erot erot;
opt_bool stop;
opt_bool thermals;
opt_bool first;
};
/// Eagle SMD pad
struct ESMD
{
std::string name;
double x;
double y;
double dx;
double dy;
int layer;
opt_int roundness;
opt_erot erot;
opt_bool stop;
opt_bool thermals;
opt_bool cream;
};
struct EVERTEX
{
double x;
double y;
};
// Eagle polygon, without vertices which are parsed as needed
struct EPOLYGON
{
double width;
int layer;
opt_double spacing;
enum { // for pour
SOLID,
HATCH,
CUTOUT,
};
opt_int pour;
opt_double isolate;
opt_bool orphans;
opt_bool thermals;
opt_int rank;
};
......@@ -212,6 +287,18 @@ static inline unsigned long timeStamp( CPTREE& aTree )
}
static opt_bool parseOptionalBool( CPTREE& attribs, const char* aName )
{
opt_bool ret;
opt_string stemp = attribs.get_optional<std::string>( aName );
if( stemp )
ret = !stemp->compare( "yes" );
return ret;
}
EAGLE_PLUGIN::EAGLE_PLUGIN()
{
init( NULL );
......@@ -459,40 +546,31 @@ void EAGLE_PLUGIN::loadPlain( CPTREE& aGraphics, const std::string& aXpath )
// net related info on it from the DTD.
else if( !gr->first.compare( "rectangle" ) )
{
#if 0
ERECT r = erect( gr->second );
int layer = kicad_layer( r.layer );
// hope the angle of rotation is zero.
// might be better off making this into a ZONE:
if( IsValidCopperLayerIndex( layer ) )
{
auto_ptr<DRAWSEGMENT> dseg = new DRAWSEGMENT( m_board );
// use a "netcode = 0" type ZONE:
ZONE_CONTAINER* zone = new ZONE_CONTAINER( m_board );
m_board->Add( zone, ADD_APPEND );
dseg->SetTimeStamp( timeStamp( gr->second ) );
dseg->SetLayer( layer );
dseg->SetShape( S_POLYGON );
dseg->SetWidth( Mils2iu( 12 ) );
zone->SetTimeStamp( timeStamp( gr->second ) );
zone->SetLayer( layer );
zone->SetNet( 0 );
std::vector<wxPoint> pts;
int outline_hatch = CPolyLine::DIAGONAL_EDGE;
pts.push_back( wxPoint( kicad_x( r.x1 ), kicad_y( r.y1 ) ) );
pts.push_back( wxPoint( kicad_x( r.x2 ), kicad_y( r.y1 ) ) );
pts.push_back( wxPoint( kicad_x( r.x2 ), kicad_y( r.y2 ) ) );
pts.push_back( wxPoint( kicad_x( r.x1 ), kicad_y( r.y2 ) ) );
dseg->SetPolyPoints( pts );
zone->m_Poly->Start( layer, kicad_x( r.x1 ), kicad_y( r.y1 ), outline_hatch );
zone->AppendCorner( wxPoint( kicad_x( r.x2 ), kicad_y( r.y1 ) ) );
zone->AppendCorner( wxPoint( kicad_x( r.x2 ), kicad_y( r.y2 ) ) );
zone->AppendCorner( wxPoint( kicad_x( r.x1 ), kicad_y( r.y2 ) ) );
zone->m_Poly->Close();
m_board->Add( dseg.release(), ADD_APPEND );
// this is not my fault:
zone->m_Poly->SetHatch( outline_hatch,
Mils2iu( zone->m_Poly->GetDefaultHatchPitchMils() ) );
}
#elif 0
// use a "netcode = 0" type ZONE:
auto_ptr<ZONE_CONTAINER> zone = new ZONE_CONTAINER( m_board );
;
m_board->Add( zone.release(), ADD_APPEND );
#endif
}
else if( !gr->first.compare( "hole" ) )
{
......@@ -630,18 +708,13 @@ void EAGLE_PLUGIN::loadElements( CPTREE& aElements, const std::string& aXpath )
for( D_PAD* pad = m->m_Pads; pad; pad = pad->Next() )
{
const ENET& enet = m_pads_to_nets[ makeKey( name, TO_UTF8( pad->GetPadName())) ];
std::string key = makeKey( name, TO_UTF8( pad->GetPadName() ) );
D(printf( "refname:'%s' pad:'%s' netcode:%d netname:'%s'\n",
name.c_str(), TO_UTF8( pad->GetPadName() ),
enet.netcode,
enet.netname.c_str()
);)
if( enet.netname.size() )
NET_MAP_CITER ni = m_pads_to_nets.find( key );
if( ni != m_pads_to_nets.end() )
{
pad->SetNetname( FROM_UTF8( enet.netname.c_str() ) );
pad->SetNet( enet.netcode );
pad->SetNetname( FROM_UTF8( ni->second.netname.c_str() ) );
pad->SetNet( ni->second.netcode );
}
}
......@@ -808,7 +881,7 @@ ERECT EAGLE_PLUGIN::erect( CPTREE& aRect ) const
r.y2 = attribs.get<double>( "y2" );
r.layer = attribs.get<int>( "layer" );
// @todo: hoping that rot is not used
// @todo: stop hoping that rot is not used
return r;
}
......@@ -883,7 +956,11 @@ EROT EAGLE_PLUGIN::erot( const std::string& aRot ) const
rot.spin = aRot.find( 'S' ) != aRot.npos;
rot.mirror = aRot.find( 'M' ) != aRot.npos;
rot.degrees = strtod( aRot.c_str() + 1 + int( rot.spin || rot.mirror ), NULL );
rot.degrees = strtod( aRot.c_str()
+ 1 // skip leading 'R'
+ int( rot.spin ) // skip optional leading 'S'
+ int( rot.mirror ), // skip optional leading 'M'
NULL );
return rot;
}
......@@ -947,6 +1024,173 @@ EATTR EAGLE_PLUGIN::eattr( CPTREE& aAttribute ) const
}
EPAD EAGLE_PLUGIN::epad( CPTREE& aPad ) const
{
EPAD p;
CPTREE& attribs = aPad.get_child( "<xmlattr>" );
/*
<!ELEMENT pad EMPTY>
<!ATTLIST pad
name %String; #REQUIRED
x %Coord; #REQUIRED
y %Coord; #REQUIRED
drill %Dimension; #REQUIRED
diameter %Dimension; "0"
shape %PadShape; "round"
rot %Rotation; "R0"
stop %Bool; "yes"
thermals %Bool; "yes"
first %Bool; "no"
>
*/
// the DTD says these must be present, throw exception if not found
p.name = attribs.get<std::string>( "name" );
p.x = attribs.get<double>( "x" );
p.y = attribs.get<double>( "y" );
p.drill = attribs.get<double>( "drill" );
p.diameter = attribs.get_optional<double>( "diameter" );
opt_string s = attribs.get_optional<std::string>( "shape" );
if( s )
{
// (square | round | octagon | long | offset)
if( !s->compare( "square" ) )
p.shape = EPAD::SQUARE;
else if( !s->compare( "round" ) )
p.shape = EPAD::ROUND;
else if( !s->compare( "octagon" ) )
p.shape = EPAD::OCTAGON;
else if( !s->compare( "long" ) )
p.shape = EPAD::LONG;
else if( !s->compare( "offset" ) )
p.shape = EPAD::OFFSET;
}
opt_string rot = attribs.get_optional<std::string>( "rot" );
if( rot )
{
p.erot = erot( *rot );
}
p.stop = parseOptionalBool( attribs, "stop" );
p.thermals = parseOptionalBool( attribs, "thermals" );
p.first = parseOptionalBool( attribs, "first" );
return p;
}
ESMD EAGLE_PLUGIN::esmd( CPTREE& aSMD ) const
{
ESMD s;
CPTREE& attribs = aSMD.get_child( "<xmlattr>" );
/*
<!ATTLIST smd
name %String; #REQUIRED
x %Coord; #REQUIRED
y %Coord; #REQUIRED
dx %Dimension; #REQUIRED
dy %Dimension; #REQUIRED
layer %Layer; #REQUIRED
roundness %Int; "0"
rot %Rotation; "R0"
stop %Bool; "yes"
thermals %Bool; "yes"
cream %Bool; "yes"
>
*/
// the DTD says these must be present, throw exception if not found
s.name = attribs.get<std::string>( "name" );
s.x = attribs.get<double>( "x" );
s.y = attribs.get<double>( "y" );
s.dx = attribs.get<double>( "dx" );
s.dy = attribs.get<double>( "dy" );
s.layer = attribs.get<int>( "layer" );
opt_string rot = attribs.get_optional<std::string>( "rot" );
if( rot )
{
s.erot = erot( *rot );
}
s.roundness = attribs.get_optional<int>( "roundness" );
s.thermals = parseOptionalBool( attribs, "thermals" );
s.stop = parseOptionalBool( attribs, "stop" );
s.thermals = parseOptionalBool( attribs, "thermals" );
s.cream = parseOptionalBool( attribs, "cream" );
return s;
}
EVERTEX EAGLE_PLUGIN::evertex( CPTREE& aVertex ) const
{
EVERTEX v;
CPTREE& attribs = aVertex.get_child( "<xmlattr>" );
/*
<!ELEMENT vertex EMPTY>
<!ATTLIST vertex
x %Coord; #REQUIRED
y %Coord; #REQUIRED
curve %WireCurve; "0" -- the curvature from this vertex to the next one --
>
*/
v.x = attribs.get<double>( "x" );
v.y = attribs.get<double>( "y" );
return v;
}
EPOLYGON EAGLE_PLUGIN::epolygon( CPTREE& aPolygon ) const
{
EPOLYGON p;
CPTREE& attribs = aPolygon.get_child( "<xmlattr>" );
/*
<!ATTLIST polygon
width %Dimension; #REQUIRED
layer %Layer; #REQUIRED
spacing %Dimension; #IMPLIED
pour %PolygonPour; "solid"
isolate %Dimension; #IMPLIED -- only in <signal> or <package> context --
orphans %Bool; "no" -- only in <signal> context --
thermals %Bool; "yes" -- only in <signal> context --
rank %Int; "0" -- 1..6 in <signal> context, 0 or 7 in <package> context --
>
*/
p.width = attribs.get<double>( "width" );
p.layer = attribs.get<int>( "layer" );
p.spacing = attribs.get_optional<double>( "spacing" );
opt_string s = attribs.get_optional<std::string>( "pour" );
if( s )
{
// (solid | hatch | cutout)
if( !s->compare( "hatch" ) )
p.pour = EPOLYGON::HATCH;
else if( !s->compare( "cutout" ) )
p.pour = EPOLYGON::CUTOUT;
else
p.pour = EPOLYGON::SOLID;
}
p.orphans = parseOptionalBool( attribs, "orphans" );
p.thermals = parseOptionalBool( attribs, "thermals" );
p.rank = attribs.get_optional<int>( "rank" );
return p;
}
MODULE* EAGLE_PLUGIN::makeModule( CPTREE& aPackage, const std::string& aPkgName ) const
{
std::auto_ptr<MODULE> m( new MODULE( NULL ) );
......@@ -1014,11 +1258,10 @@ void EAGLE_PLUGIN::packageWire( MODULE* aModule, CPTREE& aTree ) const
void EAGLE_PLUGIN::packagePad( MODULE* aModule, CPTREE& aTree ) const
{
// pay for this tree traversal only once
CPTREE& attrs = aTree.get_child( "<xmlattr>" );
// this is thru hole technology here, no SMDs
EPAD e = epad( aTree );
/* from <ealge>/doc/eagle.dtd
<!ELEMENT pad EMPTY>
<!ATTLIST pad
name %String; #REQUIRED
......@@ -1037,19 +1280,12 @@ void EAGLE_PLUGIN::packagePad( MODULE* aModule, CPTREE& aTree ) const
D_PAD* pad = new D_PAD( aModule );
aModule->m_Pads.PushBack( pad );
// the DTD says these must be present, throw exception if not found
const std::string& name = attrs.get<std::string>( "name" );
double x = attrs.get<double>( "x" );
double y = attrs.get<double>( "y" );
double drill = attrs.get<double>( "drill" );
pad->SetPadName( FROM_UTF8( e.name.c_str() ) );
// pad's "Position" is not relative to the module's,
// whereas Pos0 is relative to the module's but is the unrotated coordinate.
pad->SetPadName( FROM_UTF8( name.c_str() ) );
wxPoint padpos( kicad_x( x ), kicad_y( y ) );
wxPoint padpos( kicad_x( e.x ), kicad_y( e.y ) );
pad->SetPos0( padpos );
......@@ -1057,34 +1293,31 @@ void EAGLE_PLUGIN::packagePad( MODULE* aModule, CPTREE& aTree ) const
pad->SetPosition( padpos + aModule->GetPosition() );
pad->SetDrillSize( wxSize( kicad( drill ), kicad( drill ) ) );
pad->SetLayerMask( 0x00C0FFFF ); // should tell it to go through all layers
pad->SetDrillSize( wxSize( kicad( e.drill ), kicad( e.drill ) ) );
// Optional according to DTD.
opt_double diameter = attrs.get_optional<double>( "diameter" );
opt_string shape = attrs.get_optional<std::string>( "shape" );
opt_string rot = attrs.get_optional<std::string>( "rot" );
/*
opt_string stop = attrs.get_optional<std::string>( "stop" );
opt_string thermals = attrs.get_optional<std::string>( "thermals" );
opt_string first = attrs.get_optional<std::string>( "first" );
*/
pad->SetLayerMask( ALL_CU_LAYERS | SOLDERMASK_LAYER_BACK | SOLDERMASK_LAYER_FRONT );
if( diameter )
if( e.diameter )
{
int diameter = kicad( *e.diameter );
pad->SetSize( wxSize( diameter, diameter ) );
}
else
{
int kidiam = kicad( *diameter );
pad->SetSize( wxSize( kidiam, kidiam ) );
// the pad size is optional in the eagle DTD, supply something here that is a
// 6 mil copper surround as a minimum.
int drillz = pad->GetDrillSize().x;
int diameter = std::max( drillz + 2 * Mils2iu( 6 ), int( drillz * 1.2 ) );
pad->SetSize( wxSize( diameter, diameter ) );
}
if( shape ) // if not shape, our default is circle and that matches their default "round"
if( e.shape ) // if not shape, our default is circle and that matches their default "round"
{
// <!ENTITY % PadShape "(square | round | octagon | long | offset)">
if( !shape->compare( "round" ) )
if( *e.shape == EPAD::ROUND )
wxASSERT( pad->GetShape()==PAD_CIRCLE ); // verify set in D_PAD constructor
else if( !shape->compare( "octagon" ) )
else if( *e.shape == EPAD::OCTAGON )
{
wxASSERT( pad->GetShape()==PAD_CIRCLE ); // verify set in D_PAD constructor
......@@ -1092,7 +1325,7 @@ void EAGLE_PLUGIN::packagePad( MODULE* aModule, CPTREE& aTree ) const
// pad->SetShape( PAD_OCTAGON );
}
else if( !shape->compare( "long" ) )
else if( *e.shape == EPAD::LONG )
{
pad->SetShape( PAD_OVAL );
......@@ -1100,19 +1333,18 @@ void EAGLE_PLUGIN::packagePad( MODULE* aModule, CPTREE& aTree ) const
z.x *= 2;
pad->SetSize( z );
}
else if( !shape->compare( "square" ) )
else if( *e.shape == EPAD::SQUARE )
{
pad->SetShape( PAD_RECT );
}
}
if( rot )
if( e.erot )
{
EROT r = erot( *rot );
pad->SetOrientation( r.degrees * 10 );
pad->SetOrientation( e.erot->degrees * 10 );
}
// don't know what stop and thermals should look like now.
// @todo: handle stop and thermal
}
......@@ -1236,32 +1468,8 @@ void EAGLE_PLUGIN::packageHole( MODULE* aModule, CPTREE& aTree ) const
void EAGLE_PLUGIN::packageSMD( MODULE* aModule, CPTREE& aTree ) const
{
// pay for this tree traversal only once
CPTREE& attrs = aTree.get_child( "<xmlattr>" );
/*
<!ATTLIST smd
name %String; #REQUIRED
x %Coord; #REQUIRED
y %Coord; #REQUIRED
dx %Dimension; #REQUIRED
dy %Dimension; #REQUIRED
layer %Layer; #REQUIRED
roundness %Int; "0"
rot %Rotation; "R0"
stop %Bool; "yes"
thermals %Bool; "yes"
cream %Bool; "yes"
>
*/
// the DTD says these must be present, throw exception if not found
const std::string& name = attrs.get<std::string>( "name" );
double x = attrs.get<double>( "x" );
double y = attrs.get<double>( "y" );
double dx = attrs.get<double>( "dx" );
double dy = attrs.get<double>( "dy" );
int layer = attrs.get<int>( "layer" );
ESMD e = esmd( aTree );
int layer = kicad_layer( e.layer );
if( !IsValidCopperLayerIndex( layer ) )
{
......@@ -1271,15 +1479,14 @@ void EAGLE_PLUGIN::packageSMD( MODULE* aModule, CPTREE& aTree ) const
D_PAD* pad = new D_PAD( aModule );
aModule->m_Pads.PushBack( pad );
pad->SetPadName( FROM_UTF8( name.c_str() ) );
pad->SetPadName( FROM_UTF8( e.name.c_str() ) );
pad->SetShape( PAD_RECT );
pad->SetAttribute( PAD_SMD );
// pad's "Position" is not relative to the module's,
// whereas Pos0 is relative to the module's but is the unrotated coordinate.
wxPoint padpos( kicad_x( x ), kicad_y( y ) );
wxPoint padpos( kicad_x( e.x ), kicad_y( e.y ) );
pad->SetPos0( padpos );
......@@ -1287,33 +1494,26 @@ void EAGLE_PLUGIN::packageSMD( MODULE* aModule, CPTREE& aTree ) const
pad->SetPosition( padpos + aModule->GetPosition() );
pad->SetSize( wxSize( kicad( dx ), kicad( dy ) ) );
pad->SetSize( wxSize( kicad( e.dx ), kicad( e.dy ) ) );
pad->SetLayer( kicad_layer( layer ) );
pad->SetLayerMask( 0x00888000 );
pad->SetLayer( layer );
pad->SetLayerMask( LAYER_FRONT | SOLDERPASTE_LAYER_FRONT | SOLDERMASK_LAYER_FRONT );
// Optional according to DTD
opt_double roundness = attrs.get_optional<double>( "roundness" );
opt_string rot = attrs.get_optional<std::string>( "rot" );
opt_string stop = attrs.get_optional<std::string>( "stop" );
opt_string thermals = attrs.get_optional<std::string>( "thermals" );
opt_string cream = attrs.get_optional<std::string>( "cream" );
if( roundness ) // set set shape to PAD_RECT above, in case roundness is not present
if( e.roundness ) // set set shape to PAD_RECT above, in case roundness is not present
{
if( *roundness >= 75 ) // roundness goes from 0-100%
if( *e.roundness >= 75 ) // roundness goes from 0-100% as integer
{
if( dy == dx )
if( e.dy == e.dx )
pad->SetShape( PAD_ROUND );
else
pad->SetShape( PAD_OVAL );
}
}
if( rot )
if( e.erot )
{
EROT r = erot( *rot );
pad->SetOrientation( r.degrees * 10 );
pad->SetOrientation( e.erot->degrees * 10 );
}
// don't know what stop, thermals, and cream should look like now.
......@@ -1413,14 +1613,54 @@ void EAGLE_PLUGIN::loadSignals( CPTREE& aSignals, const std::string& aXpath )
std::string key = makeKey( reference, pad ) ;
D(printf( "adding refname:'%s' pad:'%s' netcode:%d netname:'%s'\n",
reference.c_str(), pad.c_str(), netCode, nname.c_str() );)
// D(printf( "adding refname:'%s' pad:'%s' netcode:%d netname:'%s'\n", reference.c_str(), pad.c_str(), netCode, nname.c_str() );)
m_pads_to_nets[ key ] = ENET( netCode, nname );
}
else if( !it->first.compare( "polygon" ) )
{
EPOLYGON p = epolygon( it->second );
int layer = kicad_layer( p.layer );
if( IsValidCopperLayerIndex( layer ) )
{
// use a "netcode = 0" type ZONE:
ZONE_CONTAINER* zone = new ZONE_CONTAINER( m_board );
m_board->Add( zone, ADD_APPEND );
zone->SetTimeStamp( timeStamp( it->second ) );
zone->SetLayer( layer );
zone->SetNet( netCode );
zone->SetNetName( netName );
int outline_hatch = CPolyLine::DIAGONAL_EDGE;
bool first = true;
for( CITER vi = it->second.begin(); vi != it->second.end(); ++vi )
{
if( vi->first.compare( "vertex" ) ) // skip <xmlattr> node
continue;
EVERTEX v = evertex( vi->second );
// the ZONE_CONTAINER API needs work, as you can see:
if( first )
{
zone->m_Poly->Start( layer, kicad_x( v.x ), kicad_y( v.y ), outline_hatch );
first = false;
}
else
zone->AppendCorner( wxPoint( kicad_x( v.x ), kicad_y( v.y ) ) );
}
zone->m_Poly->Close();
zone->m_Poly->SetHatch( outline_hatch,
Mils2iu( zone->m_Poly->GetDefaultHatchPitchMils() ) );
}
}
}
}
......
......@@ -57,6 +57,7 @@ struct ENET
};
typedef std::map< std::string, ENET > NET_MAP;
typedef NET_MAP::const_iterator NET_MAP_CITER;
/*
#include
......@@ -81,7 +82,10 @@ struct EATTR;
struct ECIRCLE;
struct ETEXT;
struct ERECT;
struct EPAD;
struct ESMD;
struct EVERTEX;
struct EPOLYGON;
/**
* Class EAGLE_PLUGIN
......@@ -190,20 +194,26 @@ private:
void loadElements( CPTREE& aElements, const std::string& aXpath );
// none of the 'e'funcs do any "to KiCad" conversion, they merely read the XML into binary:
/**
* Function ewire
* converts a <wire>'s xml attributes to binary without additional conversion.
* @param aResult is an EWIRE to fill in with the <wire> data converted to binary.
*/
EWIRE ewire( CPTREE& aWire ) const;
EWIRE ewire( CPTREE& aWire ) const;
EVIA evia( CPTREE& aVia ) const;
EVIA evia( CPTREE& aVia ) const;
ECIRCLE ecircle( CPTREE& aCircle ) const;
ETEXT etext( CPTREE& aText ) const;
ERECT erect( CPTREE& aRect ) const;
ECIRCLE ecircle( CPTREE& aCircle ) const;
ETEXT etext( CPTREE& aText ) const;
ERECT erect( CPTREE& aRect ) const;
EROT erot( const std::string& aRot ) const;
EROT erot( const std::string& aRot ) const;
EPAD epad( CPTREE& aPad ) const;
ESMD esmd( CPTREE& aSMD ) const;
EVERTEX evertex( CPTREE& aVertex ) const;
EPOLYGON epolygon( CPTREE& aPolygon ) const;
/**
* Function eattr
......
......@@ -1152,7 +1152,7 @@ void SPECCTRA_DB::FromBOARD( BOARD* aBoard ) throw( IO_ERROR )
PATH* mainPolygon = new PATH( plane, T_polygon );
plane->SetShape( mainPolygon );
plane->name = TO_UTF8( item->m_Netname );
plane->name = TO_UTF8( item->GetNetName() );
if( plane->name.size() == 0 )
{
......
......@@ -800,7 +800,7 @@ void PCB_EDIT_FRAME::Edit_Zone_Params( wxDC* DC, ZONE_CONTAINER* aZone )
NETINFO_ITEM* net = GetBoard()->FindNet( zoneInfo.m_NetcodeSelection );
if( net ) // net == NULL should not occur
aZone->m_Netname = net->GetNetname();
aZone->SetNetName( net->GetNetname() );
// Combine zones if possible
GetBoard()->AreaPolygonModified( &_AuxiliaryList, aZone, true, s_Verbose );
......
......@@ -74,7 +74,6 @@ DIALOG_NON_COPPER_ZONES_EDITOR::DIALOG_NON_COPPER_ZONES_EDITOR( PCB_BASE_FRAME*
void DIALOG_NON_COPPER_ZONES_EDITOR::Init()
{
SetFocus();
SetReturnCode( ZONE_ABORT ); // Will be changed on button click
m_FillModeCtrl->SetSelection( m_settings.m_FillMode ? 1 : 0 );
......
......@@ -282,7 +282,7 @@ int BOARD::ClipAreaPolygon( PICKED_ITEMS_LIST * aNewZonesList,
{
wxString str;
str.Printf( wxT( "Area %08lX of net \"%s\" has arcs intersecting other sides.\n" ),
aCurrArea->GetTimeStamp(), GetChars( aCurrArea->m_Netname ) );
aCurrArea->GetTimeStamp(), GetChars( aCurrArea->GetNetName() ) );
str += wxT( "This may cause problems with other editing operations,\n" );
str += wxT( "such as adding cutouts. It can't be fixed automatically.\n" );
str += wxT( "Manual correction is recommended." );
......@@ -305,7 +305,7 @@ int BOARD::ClipAreaPolygon( PICKED_ITEMS_LIST * aNewZonesList,
{
wxString str;
str.Printf( wxT( "Area %08lX of net \"%s\" is self-intersecting and will be clipped.\n" ),
aCurrArea->GetTimeStamp(), GetChars( aCurrArea->m_Netname ) );
aCurrArea->GetTimeStamp(), GetChars( aCurrArea->GetNetName() ) );
str += wxT( "This may result in splitting the area.\n" );
str += wxT( "If the area is complex, this may take a few seconds." );
wxMessageBox( str );
......@@ -482,7 +482,7 @@ int BOARD::CombineAllAreasInNet( PICKED_ITEMS_LIST* aDeletedList, int aNetCode,
str.Printf( wxT( "Areas %d and %d of net \"%s\" intersect, but some of the intersecting sides are arcs.\n" ),
ia1 + 1,
ia2 + 1,
GetChars( curr_area->m_Netname ) );
GetChars( curr_area->GetNetName() ) );
str += wxT( "Therefore, these areas can't be combined." );
wxMessageBox( str );
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment