Changed the functionality of the 'insert' modified footprint module in the

module editor to a more sensible replace and update functionality. 

pcbnew/modedit.cpp

@@ -55,7 +55,7 @@ wxClientDC dc(DrawPanel);
 
 	pos.y += 20;
 
-	switch ( id )	// Arret eventuel de la commande de dplacement en cours
+	switch ( id )	// Arret eventuel de la commande de d�placement en cours
 		{
 		case wxID_CUT:
 		case wxID_COPY:
@@ -95,7 +95,7 @@ wxClientDC dc(DrawPanel);
 				}
 			break;
 
-		default:	// Arret dea commande de dplacement en cours
+		default:	// Arret dea commande de d�placement en cours
 			if( DrawPanel->ManageCurseur &&
 				DrawPanel->ForceCloseManageCurseur )
 				{
@@ -149,20 +149,104 @@ wxClientDC dc(DrawPanel);
 			if ( m_Draw3DFrame )
 				m_Draw3DFrame->NewDisplay();
 			break;
+		case ID_MODEDIT_SAVE_MODULE_IN_BOARD:{
+			// seems that this should update modules in the current board, 
+			// not just add it to the board with total disregard for the 
+			// netlist...?
+			WinEDA_PcbFrame * pcbframe = m_Parent->m_PcbFrame;
+			BOARD * mainpcb = pcbframe->m_Pcb;
+			MODULE * presmod = m_Pcb->m_Modules; //the module being edited. 
+			//i guess we need to search through the modules here.. they are in a linked list.
+			//replace based on m_libref?
+			MODULE* mod = mainpcb->m_Modules;
+			do{
+				//need to be careful in this doubly linked-list to maintain order & link
+				// also have to maintain netname on all the pads according to m_NumPadName.
+				if(mod->m_LibRef == presmod->m_LibRef){//have to be careful with this test of similarity?
+					wprintf(L"replace: mod->m_LibRef = %S @ %d %d orient: %d\n", mod->m_LibRef.c_str(), 
+						   mod->m_Pos.x, mod->m_Pos.y, mod->m_Orient); 
+					MODULE* newmod = new MODULE(mainpcb); 
+					newmod->Copy(presmod); //this will copy the padstack layers etc
+					newmod->m_Parent = mainpcb; //modify after the copy above
+					newmod->m_Layer = mod->m_Layer; 
+					newmod->m_Pos = mod->m_Pos; 
+					newmod->m_Orient =0; //otherwise the pads will be rotated with respect to the module. 
+					//copy data into the pads...
+					
+					D_PAD* newpad = newmod->m_Pads; 
+					for(; newpad != NULL; newpad = (D_PAD*)newpad->Pnext){
+						D_PAD* pad = mod->m_Pads; 
+						for(; pad != NULL; pad = (D_PAD*)pad->Pnext){
+							if(pad->m_NumPadName == newpad->m_NumPadName){
+								wprintf(L"  pad->NumPadName %d @ %d %d :new %d %d, orient: %d\n", pad->m_NumPadName, 
+										pad->m_Pos.x, pad->m_Pos.y, newpad->m_Pos.x, newpad->m_Pos.y, pad->m_Orient); 
+								wprintf(L"  pad->m_Netname %S\n", pad->m_Netname.c_str()); 
+								newpad->m_Netname = pad->m_Netname; 
+								newpad->m_NetCode = pad->m_NetCode; 
+								newpad->m_logical_connexion = pad->m_logical_connexion; 
+								newpad->m_physical_connexion = pad->m_physical_connexion; 
+								newpad->m_Pos.x += newmod->m_Pos.x; //the pad positions are apparently in global coordinates.
+								newpad->m_Pos.y += newmod->m_Pos.y; 
+								newpad->m_Orient = pad->m_Orient; 
+							}
+						}
+					}
 					
-		case ID_MODEDIT_SAVE_MODULE_IN_BOARD:
+					//not sure what to do about m_Drawings..assume they are ok?
+					//copy only the text in m_Ref and m_Val; 
+					//leave the size and position as in the module in edit. 
+					newmod->m_Reference->m_Text = mod->m_Reference->m_Text; 
+					newmod->m_Value->m_Text = mod->m_Value->m_Text; 
+					wprintf(L"replace: mod->m_Reference = %S\n", newmod->m_Reference->m_Text.c_str()); 
+					wprintf(L"replace: mod->m_Value = %S\n", newmod->m_Value->m_Text.c_str()); 
+					newmod->m_Attributs = mod->m_Attributs; 
+					newmod->m_Orient = mod->m_Orient; 
+					newmod->flag = mod->flag; 
+					newmod->m_Flags = 0; //inherited from EDA_BaseStruct.
+					newmod->m_ModuleStatus = mod->m_ModuleStatus; 
+					//redo the boundary boxes
+					newmod->Set_Rectangle_Encadrement(); 
+					newmod->SetRectangleExinscrit(); 
+					newmod->m_CntRot90 = mod->m_CntRot90; 
+					newmod->m_CntRot180 = mod->m_CntRot180; 
+					newmod->m_Surface = mod->m_Surface; 
+					pcbframe->Rotate_Module(NULL, newmod, mod->m_Orient, false);
+					//now, need to replace 'mod' in the linked list with 'newmod'. 
+					//this does not seem to be working correctly.. 
+					MODULE* oldmod = mod; 
+					mod = (MODULE*)mod->Pnext; 
+					oldmod->UnLink(); 
+					delete oldmod; 
+					//insert the new one. 
+					newmod->Pnext = mainpcb->m_Modules;
+					mainpcb->m_Modules->Pback = newmod; // check this!
+					mainpcb->m_Modules = newmod;
+					newmod->Pback = mainpcb;
+					wprintf(L"-----\n"); 
+				}else{
+					mod = (MODULE*)mod->Pnext; 
+				}
+			}while(mod != NULL); 
+			GetScreen()->ClrModify();
+			pcbframe->GetScreen()->m_CurrentItem = NULL;
+			mainpcb->m_Status_Pcb = 0;
+		}
+		break; 
+		/*case ID_MODEDIT_SAVE_MODULE_IN_BOARD:
 			{
 			WinEDA_PcbFrame * pcbframe = m_Parent->m_PcbFrame;
 			BOARD * mainpcb = pcbframe->m_Pcb;
 			MODULE * oldmodule = NULL;
 			MODULE * module_in_edit = m_Pcb->m_Modules;
 			// creation du nouveau module sur le PCB en cours
+			// create a new unit on the PCB, of course.
 			MODULE * newmodule = new MODULE(mainpcb);
 			newmodule->Copy(module_in_edit);
 			newmodule->m_Parent = mainpcb;  // modifie par la copie 
 			newmodule->m_Link = 0;
 			// Recherche de l'ancien module correspondant
-			//(qui a pu changer ou disparaitre a la suite d'ditions)
+			//(qui a pu changer ou disparaitre a la suite d'�ditions)
+			//locate the corresponding former unit, which may have a different revision. 
 			if ( module_in_edit->m_Link )
 				{
 				oldmodule = mainpcb->m_Modules;
@@ -196,7 +280,7 @@ wxClientDC dc(DrawPanel);
 			pcbframe->GetScreen()->m_CurrentItem = NULL;
 			mainpcb->m_Status_Pcb = 0;
 			}
-			break;
+			break;*/
 
 		case ID_LIBEDIT_IMPORT_PART:
 			GetScreen()->ClearUndoRedoList();
@@ -224,19 +308,29 @@ wxClientDC dc(DrawPanel);
 		case ID_MODEDIT_SHEET_SET:
 			break;
 
-		case ID_MODEDIT_LOAD_MODULE:
+		case ID_MODEDIT_LOAD_MODULE:{
 			GetScreen()->ClearUndoRedoList();
 			GetScreen()->m_CurrentItem = NULL;
 			Clear_Pcb(&dc, TRUE);
 			GetScreen()->m_Curseur = wxPoint(0,0);
 			Load_Module_From_Library(m_CurrentLib, &dc);
 			if ( m_Pcb->m_Modules ) m_Pcb->m_Modules->m_Flags = 0;
+			//if either m_Reference or m_Value are gone, reinstate them - 
+			//otherwise it becomes hard to see what you are working with in the layout!
+			TEXTE_MODULE* ref = m_Pcb->m_Modules->m_Reference;
+			TEXTE_MODULE* val = m_Pcb->m_Modules->m_Value;
+			ref->m_NoShow = 0;
+			val->m_NoShow = 0;
+			ref->m_Type = 0; 
+			val->m_Type = 1; 
+			if(ref->m_Text.Length() == 0) ref->m_Text = L"Ref**"; 
+			if(val->m_Text.Length() == 0) val->m_Text = L"Val**"; 			
 			GetScreen()->ClrModify();
 			Zoom_Automatique(TRUE);
 			if ( m_Draw3DFrame )
 				m_Draw3DFrame->NewDisplay();
 			break;
-
+		}
 
 		case ID_MODEDIT_PAD_SETTINGS:
 			InstallPadOptionsFrame(NULL, NULL, wxPoint(-1, -1) );
@@ -509,10 +603,10 @@ wxClientDC dc(DrawPanel);
 /******************************************************************************/
 void WinEDA_ModuleEditFrame::Transform(MODULE* module, wxDC * DC, int transform)
 /******************************************************************************/
-/* Execute les transformations de la reprsentation des modules.
+/* Execute les transformations de la repr�sentation des modules.
 	le module, apres transformation est toujours en position de reference:
 	position 0,0
-	orientation 0, cot composant.
+	orientation 0, cot� composant.
 */
 {
 D_PAD * pad = module->m_Pads;

pcbnew/tool_modedit.cpp

@@ -70,11 +70,11 @@ void WinEDA_ModuleEditFrame::ReCreateHToolbar(void)
 	m_HToolBar->AddSeparator();
 	m_HToolBar->AddTool(ID_MODEDIT_LOAD_MODULE_FROM_BOARD, wxEmptyString,
 					BITMAP(load_module_board_xpm),
-					_("Load module from current BOARD"));
+					_("Load module from current board"));
 
 	m_HToolBar->AddTool(ID_MODEDIT_SAVE_MODULE_IN_BOARD, wxEmptyString,
 					BITMAP(repl_module_board_xpm),
-					_("Replace module in current BOARD"));
+					_("Update module in current board"));
 
 	m_HToolBar->AddSeparator();
 	m_HToolBar->AddTool(ID_LIBEDIT_IMPORT_PART,  wxEmptyString,

pcbnew/zones.cpp

@@ -202,7 +202,7 @@ wxString title = _("Zone clearance value:") + ReturnUnitSymbol(g_UnitMetric);
 	if ( Zone_45_Only ) m_OrientEdgesOpt->SetSelection(1);
 
 int GridList[4] = { 50,100,250,500}, selection = 0;
-	for ( unsigned int ii = 0; ii < m_GridCtrl->GetCount(); ii++ )
+	for ( int ii = 0; ii < m_GridCtrl->GetCount(); ii++ )
 	{
 		wxString msg = ReturnStringFromValue(g_UnitMetric, GridList[ii], m_Parent->m_InternalUnits);
 		m_GridCtrl->SetString(ii,msg);