Upstream merge.

CMakeLists.txt

@@ -364,13 +364,13 @@ check_find_package_result( OPENGL_FOUND "OpenGL" )
 # https://www.mail-archive.com/cmake@cmake.org/msg47501.html
 
 # Handle target used to specify if a target needs wx-widgets or other libraries
-# Always defined, empty if no libraries are to be build
+# Always defined, empty if no libraries are to be built
 add_custom_target( lib-dependencies )
 
 if( KICAD_BUILD_STATIC OR KICAD_BUILD_DYNAMIC )
 
-    # This should be build in all cases, if swig exec is not avaiable
-    # will be impossible also enable SCRIPTING being for PCBNEW required immediatly
+    # This should be built in all cases, if swig exec is not avaiable
+    # will be impossible also enable SCRIPTING being for PCBNEW required immediately
 
     include( download_pcre )
     include( download_swig )

common/CMakeLists.txt

@@ -172,6 +172,7 @@ set( COMMON_SRCS
     eda_dde.cpp
     eda_doc.cpp
     filter_reader.cpp
+#    findkicadhelppath.cpp.notused      deprecated, use searchhelpfilefullpath.cpp
     gestfich.cpp
     getrunningmicrosecs.cpp
     grid_tricks.cpp
@@ -189,6 +190,7 @@ set( COMMON_SRCS
     ptree.cpp
     reporter.cpp
     richio.cpp
+    searchhelpfilefullpath.cpp
     search_stack.cpp
     selcolor.cpp
     systemdirsappend.cpp

common/basicframe.cpp

@@ -271,6 +271,18 @@ wxConfigBase* EDA_BASE_FRAME::config()
 }
 
 
+const SEARCH_STACK& EDA_BASE_FRAME::sys_search()
+{
+    return Kiface().KifaceSearch();
+}
+
+
+wxString EDA_BASE_FRAME::help_name()
+{
+    return Kiface().GetHelpFileName();
+}
+
+
 void EDA_BASE_FRAME::PrintMsg( const wxString& text )
 {
     SetStatusText( text );
@@ -327,33 +339,28 @@ wxString EDA_BASE_FRAME::GetFileFromHistory( int cmdId, const wxString& type,
 
 void EDA_BASE_FRAME::GetKicadHelp( wxCommandEvent& event )
 {
-    wxString msg;
+    const SEARCH_STACK& search = sys_search();
 
     /* We have to get document for beginners,
-     * or the the full specific doc
+     * or the full specific doc
      * if event id is wxID_INDEX, we want the document for beginners.
      * else the specific doc file (its name is in Kiface().GetHelpFileName())
      * The document for beginners is the same for all KiCad utilities
      */
     if( event.GetId() == wxID_INDEX )
     {
-        // Temporarily change the help filename
-        wxString tmp = Kiface().GetHelpFileName();
-
         // Search for "getting_started_in_kicad.pdf" or "Getting_Started_in_KiCad.pdf"
-        Kiface().SetHelpFileName( wxT( "getting_started_in_kicad.pdf" ) );
-        wxString helpFile = Kiface().GetHelpFile();
+        wxString helpFile = SearchHelpFileFullPath( search, wxT( "getting_started_in_kicad.pdf" ) );
 
         if( !helpFile )
-        {   // Try to find "Getting_Started_in_KiCad.pdf"
-            Kiface().SetHelpFileName( wxT( "Getting_Started_in_KiCad.pdf" ) );
-            helpFile = Kiface().GetHelpFile();
-        }
+            helpFile = SearchHelpFileFullPath( search, wxT( "Getting_Started_in_KiCad.pdf" ) );
 
         if( !helpFile )
         {
-            msg.Printf( _( "Help file %s could not be found." ),
-                        GetChars( Kiface().GetHelpFileName() ) );
+            wxString msg = wxString::Format( _(
+                "Help file '%s' could not be found." ),
+                wxT( "getting_started_in_kicad.pdf" )
+                );
             wxMessageBox( msg );
         }
         else
@@ -361,36 +368,36 @@ void EDA_BASE_FRAME::GetKicadHelp( wxCommandEvent& event )
             GetAssociatedDocument( this, helpFile );
         }
 
-        Kiface().SetHelpFileName( tmp );
         return;
     }
 
+    wxString base_name = help_name();
+
 #if defined ONLINE_HELP_FILES_FORMAT_IS_HTML
 
-    if( Kiface().GetHtmlHelpController() == NULL )
-    {
-        Kiface().InitOnLineHelp();
-    }
+    wxHtmlHelpController* hc = Pgm().GetHtmlHelpController();
 
+    wxString helpFile = SearchHelpFileFullPath( search,   );
 
-    if( Kiface().GetHtmlHelpController() )
+    if( !!helpFile )
     {
-        Kiface().GetHtmlHelpController()->DisplayContents();
-        Kiface().GetHtmlHelpController()->Display( Kiface().GetHelpFileName() );
-    }
-    else
-    {
-        msg.Printf( _( "Help file %s could not be found." ), GetChars( Kiface().GetHelpFileName() ) );
-        wxMessageBox( msg );
+        hc->UseConfig( Pgm().CommonSettings() );
+        hc->SetTitleFormat( wxT( "KiCad Help" ) );
+        hc->AddBook( helpFile );
     }
 
+    hc->DisplayContents();
+    hc->Display( helpFile );
+
 #elif defined ONLINE_HELP_FILES_FORMAT_IS_PDF
-    wxString helpFile = Kiface().GetHelpFile();
+    wxString helpFile = SearchHelpFileFullPath( search, base_name );
 
     if( !helpFile )
     {
-        msg.Printf( _( "Help file %s could not be found." ),
-                    GetChars( Kiface().GetHelpFileName() ) );
+        wxString msg = wxString::Format( _(
+            "Help file '%s' could not be found." ),
+            GetChars( base_name )
+            );
         wxMessageBox( msg );
     }
     else

common/eda_doc.cpp

@@ -64,15 +64,19 @@ bool GetAssociatedDocument( wxFrame* aFrame,
                             const wxPathList* aPaths)
 
 {
-    wxString docname, fullfilename, file_ext;
+    wxString docname, fullfilename;
     wxString msg;
     wxString command;
     bool     success = false;
 
     // Is an internet url
-    static const wxString url_header[3] = { wxT( "http:" ), wxT( "ftp:" ), wxT( "www." ) };
+    static const wxChar* url_header[3] = {
+        wxT( "http:" ),
+        wxT( "ftp:" ),
+        wxT( "www." )
+    };
 
-    for( int ii = 0; ii < 3; ii++ )
+    for( unsigned ii = 0; ii < DIM(url_header); ii++ )
     {
         if( aDocName.First( url_header[ii] ) == 0 )   //. seems an internet url
         {
@@ -133,8 +137,9 @@ bool GetAssociatedDocument( wxFrame* aFrame,
         return false;
     }
 
-    wxFileName CurrentFileName( fullfilename );
-    file_ext = CurrentFileName.GetExt();
+    wxFileName currentFileName( fullfilename );
+
+    wxString file_ext = currentFileName.GetExt();
 
     if( file_ext == wxT( "pdf" ) )
     {

common/findkicadhelppath.cpp.notused

+
+#include <fctsys.h>
+#include <pgm_base.h>
+#include <macros.h>
+#include <gestfich.h>
+
+
+/**
+ * Function FindKicadHelpPath
+ * finds the absolute path for KiCad "help" (or "help/&ltlanguage&gt")
+ *  Find path kicad/doc/help/xx/ or kicad/doc/help/:
+ *  from BinDir
+ *  else from environment variable KICAD
+ *  else from one of s_HelpPathList
+ *  typically c:/kicad/doc/help or /usr/share/kicad/help
+ *            or /usr/local/share/kicad/help
+ *  (must have kicad in path name)
+ *
+ *  xx = iso639-1 language id (2 letters (generic) or 4 letters):
+ *  fr = french (or fr_FR)
+ *  en = English (or en_GB or en_US ...)
+ *  de = deutch
+ *  es = spanish
+ *  pt = portuguese (or pt_BR ...)
+ *
+ *  default = en (if not found = fr)
+ */
+wxString FindKicadHelpPath()
+{
+    bool     found = false;
+    wxString bin_dir = Pgm().GetExecutablePath();
+
+    if( bin_dir.Last() == '/' )
+        bin_dir.RemoveLast();
+
+    wxString fullPath = bin_dir.BeforeLast( '/' );  // cd ..
+
+    fullPath += wxT( "/doc/help/" );
+
+    wxString localeString = Pgm().GetLocale()->GetCanonicalName();
+
+    wxString path_tmp = fullPath;
+
+#ifdef __WINDOWS__
+    path_tmp.MakeLower();
+#endif
+
+    if( path_tmp.Contains( wxT( "kicad" ) ) )
+    {
+        if( wxDirExists( fullPath ) )
+            found = true;
+    }
+
+    // find kicad/help/ from environment variable  KICAD
+    if( !found && Pgm().IsKicadEnvVariableDefined() )
+    {
+        fullPath = Pgm().GetKicadEnvVariable() + wxT( "/doc/help/" );
+
+        if( wxDirExists( fullPath ) )
+            found = true;
+    }
+
+    if( !found )
+    {
+        // Possibilities online help
+        const static wxChar* possibilities[] = {
+#ifdef __WINDOWS__
+            wxT( "c:/kicad/doc/help/" ),
+            wxT( "d:/kicad/doc/help/" ),
+            wxT( "c:/Program Files/kicad/doc/help/" ),
+            wxT( "d:/Program Files/kicad/doc/help/" ),
+#else
+            wxT( "/usr/share/doc/kicad/help/" ),
+            wxT( "/usr/local/share/doc/kicad/help/" ),
+            wxT( "/usr/local/kicad/doc/help/" ),    // default install for "universal
+                                                    // tarballs" and build for a server
+                                                    // (new)
+            wxT( "/usr/local/kicad/help/" ),        // default install for "universal
+                                                    // tarballs" and build for a server
+                                                    // (old)
+#endif
+        };
+
+        for( unsigned i=0;  i<DIM(possibilities);  ++i )
+        {
+            fullPath = possibilities[i];
+
+            if( wxDirExists( fullPath ) )
+            {
+                found = true;
+                break;
+            }
+        }
+    }
+
+    if( found )
+    {
+        wxString langFullPath = fullPath + localeString + UNIX_STRING_DIR_SEP;
+
+        if( wxDirExists( langFullPath ) )
+            return langFullPath;
+
+        langFullPath = fullPath + localeString.Left( 2 ) + UNIX_STRING_DIR_SEP;
+
+        if( wxDirExists( langFullPath ) )
+            return langFullPath;
+
+        langFullPath = fullPath + wxT( "en/" );
+
+        if( wxDirExists( langFullPath ) )
+        {
+            return langFullPath;
+        }
+        else
+        {
+            langFullPath = fullPath + wxT( "fr/" );
+
+            if( wxDirExists( langFullPath ) )
+                return langFullPath;
+        }
+        return fullPath;
+    }
+
+    return wxEmptyString;
+}
+

common/fp_lib_table.cpp

@@ -622,8 +622,6 @@ const FP_LIB_TABLE::ROW* FP_LIB_TABLE::FindRow( const wxString& aNickname )
 // wxGetenv( wchar_t* ) is not re-entrant on linux.
 // Put a lock on multithreaded use of wxGetenv( wchar_t* ), called from wxEpandEnvVars(),
 // needed by bool ReadFootprintFiles( FP_LIB_TABLE* aTable, const wxString* aNickname = NULL );
-#if 1
-
 #include <ki_mutex.h>
 
 const wxString FP_LIB_TABLE::ExpandSubstitutions( const wxString& aString )
@@ -637,177 +635,44 @@ const wxString FP_LIB_TABLE::ExpandSubstitutions( const wxString& aString )
     return wxExpandEnvVars( aString );
 }
 
-#else
-
-const wxString FP_LIB_TABLE::ExpandSubstitutions( const wxString& aString )
-{
-    // We reserve the right to do this another way, by providing our own member
-    // function.
-    return wxExpandEnvVars( aString );
-}
-
-#endif
 
 bool FP_LIB_TABLE::IsEmpty( bool aIncludeFallback )
 {
-    if( !aIncludeFallback || (fallBack == NULL) )
+    if( !aIncludeFallback || !fallBack )
         return rows.empty();
 
-    return fallBack->IsEmpty() && rows.empty();
+    return rows.empty() && fallBack->IsEmpty( true );
 }
 
 
-bool FP_LIB_TABLE::ConvertFromLegacy( SEARCH_STACK& aSStack, NETLIST& aNetList,
-        const wxArrayString& aLibNames, REPORTER* aReporter ) throw( IO_ERROR )
+MODULE* FP_LIB_TABLE::FootprintLoadWithOptionalNickname( const FPID& aFootprintId )
+    throw( IO_ERROR, PARSE_ERROR )
 {
-    wxString   msg;
-    FPID       lastFPID;
-    COMPONENT* component;
-    MODULE*    module = 0;
-    bool       retv = true;
-
-    if( aNetList.IsEmpty() )
-        return true;
-
-    aNetList.SortByFPID();
-
-    wxString   libPath;
-
-    PLUGIN::RELEASER pi( IO_MGR::PluginFind( IO_MGR::LEGACY ) );
+    wxString   nickname = aFootprintId.GetLibNickname();
+    wxString   fpname   = aFootprintId.GetFootprintName();
 
-    for( unsigned ii = 0; ii < aNetList.GetCount(); ii++ )
+    if( nickname.size() )
     {
-        component = aNetList.GetComponent( ii );
-
-        // The footprint hasn't been assigned yet so ignore it.
-        if( component->GetFPID().empty() )
-            continue;
-
-        if( component->GetFPID() != lastFPID )
-        {
-            module = NULL;
-
-            for( unsigned ii = 0; ii < aLibNames.GetCount(); ii++ )
-            {
-                wxFileName fn( wxEmptyString, aLibNames[ii], LegacyFootprintLibPathExtension );
-
-                libPath = aSStack.FindValidPath( fn );
-
-                if( !libPath )
-                {
-                    if( aReporter )
-                    {
-                        msg.Printf( _( "Cannot find footprint library file '%s' in any of the "
-                                       "KiCad legacy library search paths.\n" ),
-                                    GetChars( fn.GetFullPath() ) );
-                        aReporter->Report( msg );
-                    }
-
-                    retv = false;
-                    continue;
-                }
-
-                module = pi->FootprintLoad( libPath, component->GetFPID().GetFootprintName() );
+        return FootprintLoad( nickname, fpname );
+    }
 
-                if( module )
-                {
-                    lastFPID = component->GetFPID();
-                    break;
-                }
-            }
-        }
+    // nickname is empty, sequentially search (alphabetically) all libs/nicks for first match:
+    else
+    {
+        std::vector<wxString> nicks = GetLogicalLibs();
 
-        if( !module )
+        // Search each library going through libraries alphabetically.
+        for( unsigned i = 0;  i<nicks.size();  ++i )
         {
-            if( aReporter )
-            {
-                msg.Printf( _( "Component `%s` footprint '%s' was not found in any legacy "
-                               "library.\n" ),
-                            GetChars( component->GetReference() ),
-                            GetChars( component->GetFPID().Format() ) );
-                aReporter->Report( msg );
-            }
-
-            // Clear the footprint assignment since the old library lookup method is no
-            // longer valid.
-            FPID emptyFPID;
-
-            component->SetFPID( emptyFPID );
-            retv = false;
-            continue;
+            // FootprintLoad() returns NULL on not found, does not throw exception
+            // unless there's an IO_ERROR.
+            MODULE* ret = FootprintLoad( nicks[i], fpname );
+            if( ret )
+                return ret;
         }
-        else
-        {
-            wxString libNickname;
-
-            FP_LIB_TABLE* cur = this;
-
-            do
-            {
-                cur->ensureIndex();
-
-                for( unsigned i = 0;  i < cur->rows.size();  i++ )
-                {
-                    wxString uri = cur->rows[i].GetFullURI( true );
-
-                    if( wxFileName::GetPathSeparator() == wxChar( '\\' )
-                        && uri.Find( wxChar( '/' ) ) >= 0 )
-                    {
-                        uri.Replace( wxT( "/"), wxT( "\\" ) );
-                    }
-#ifdef __WINDOWS__
-                    if( uri.CmpNoCase( libPath ) )
-#else
-                    if( uri == libPath )
-#endif
-                    {
-                        libNickname = cur->rows[i].GetNickName();
-                        break;
-                    }
-                }
-
-            } while( ( cur = cur->fallBack ) != 0 && libNickname.IsEmpty() );
 
-            if( libNickname.IsEmpty() )
-            {
-                if( aReporter )
-                {
-                    msg.Printf( _( "Component '%s' footprint '%s' legacy library path '%s' "
-                                   "was not found in the footprint library table.\n" ),
-                                GetChars( component->GetReference() ),
-                                GetChars( component->GetFPID().Format() ) );
-                    aReporter->Report( msg );
-                }
-
-                retv = false;
-            }
-            else
-            {
-                FPID newFPID = lastFPID;
-                newFPID.SetLibNickname( libNickname );
-
-                if( !newFPID.IsValid() )
-                {
-                    if( aReporter )
-                    {
-                        msg.Printf( _( "Component '%s' FPID '%s' is not valid.\n" ),
-                                    GetChars( component->GetReference() ),
-                                    GetChars( newFPID.Format() ) );
-                        aReporter->Report( msg );
-                    }
-
-                    retv = false;
-                }
-                else
-                {
-                    // The footprint name should already be set.
-                    component->SetFPID( newFPID );
-                }
-            }
-        }
+        return NULL;
     }
-
-    return retv;
 }
 
 
@@ -839,17 +704,14 @@ bool FP_LIB_TABLE::LoadGlobalTable( FP_LIB_TABLE& aTable ) throw (IO_ERROR, PARS
         // The fallback is to create an empty global footprint table for the user to populate.
         if( fileName.IsEmpty() || !::wxCopyFile( fileName, fn.GetFullPath(), false ) )
         {
-            FP_LIB_TABLE            emptyTable;
-            FILE_OUTPUTFORMATTER    sf( fn.GetFullPath() );
+            FP_LIB_TABLE    emptyTable;
 
-            emptyTable.Format( &sf, 0 );
+            emptyTable.Save( fn.GetFullPath() );
         }
     }
 
-    FILE_LINE_READER    reader( fn.GetFullPath() );
-    FP_LIB_TABLE_LEXER  lexer( &reader );
+    aTable.Load( fn.GetFullPath() );
 
-    aTable.Parse( &lexer );
     return tableExists;
 }
 

common/gestfich.cpp

@@ -78,66 +78,6 @@
  *  like export KICAD=/my_path/kicad if /my_path/kicad is not a default path
  */
 
-// Path list for online help
-static wxString    s_HelpPathList[] = {
-#ifdef __WINDOWS__
-    wxT( "c:/kicad/doc/help/" ),
-    wxT( "d:/kicad/doc/help/" ),
-    wxT( "c:/Program Files/kicad/doc/help/" ),
-    wxT( "d:/Program Files/kicad/doc/help/" ),
-#else
-    wxT( "/usr/share/doc/kicad/help/" ),
-    wxT( "/usr/local/share/doc/kicad/help/" ),
-    wxT( "/usr/local/kicad/doc/help/" ),    // default install for "universal
-                                            // tarballs" and build for a server
-                                            // (new)
-    wxT( "/usr/local/kicad/help/" ),        // default install for "universal
-                                            // tarballs" and build for a server
-                                            // (old)
-#endif
-    wxT( "end_list" )                       // End of list symbol, do not change
-};
-
-
-// Path list for KiCad data files
-static wxString    s_KicadDataPathList[] = {
-#ifdef __WINDOWS__
-    wxT( "c:/kicad/share/" ),
-    wxT( "d:/kicad/share/" ),
-    wxT( "c:/kicad/" ),
-    wxT( "d:/kicad/" ),
-    wxT( "c:/Program Files/kicad/share/" ),
-    wxT( "d:/Program Files/kicad/share/" ),
-    wxT( "c:/Program Files/kicad/" ),
-    wxT( "d:/Program Files/kicad/" ),
-#else
-    wxT( "/usr/share/kicad/" ),
-    wxT( "/usr/local/share/kicad/" ),
-    wxT( "/usr/local/kicad/share/" ),   // default data path for "universal
-                                        // tarballs" and build for a server
-                                        // (new)
-    wxT( "/usr/local/kicad/" ),         // default data path for "universal
-                                        // tarballs" and build for a server
-                                        // (old)
-#endif
-    wxT( "end_list" )                   // End of list symbol, do not change
-};
-
-// Path list for KiCad binary files
-static wxString    s_KicadBinaryPathList[] = {
-#ifdef __WINDOWS__
-    wxT( "c:/kicad/bin/" ),
-    wxT( "d:/kicad/bin/" ),
-    wxT( "c:/Program Files/kicad/bin/" ),
-    wxT( "d:/Program Files/kicad/bin/" ),
-#else
-    wxT( "/usr/bin/" ),
-    wxT( "/usr/local/bin/" ),
-    wxT( "/usr/local/kicad/bin/" ),
-#endif
-    wxT( "end_list" )                   // End of list symbol, do not change
-};
-
 
 wxString MakeReducedFileName( const wxString& fullfilename,
                               const wxString& default_path,
@@ -281,7 +221,7 @@ wxString EDA_FileSelector( const wxString& Title,
                                    defaultname,
                                    dotted_Ext,
                                    Mask,
-                                   flag, /* open mode wxFD_OPEN, wxFD_SAVE .. */
+                                   flag, // open mode wxFD_OPEN, wxFD_SAVE ..
                                    Frame,
                                    Pos.x, Pos.y );
 
@@ -292,123 +232,48 @@ wxString EDA_FileSelector( const wxString& Title,
 }
 
 
-wxString FindKicadHelpPath()
-{
-    wxString FullPath, LangFullPath, tmp;
-    wxString LocaleString;
-    bool     PathFound = false;
-
-    /* find kicad/help/ */
-    tmp = Pgm().GetExecutablePath();
-
-    if( tmp.Last() == '/' )
-        tmp.RemoveLast();
-
-    FullPath     = tmp.BeforeLast( '/' ); // cd ..
-    FullPath    += wxT( "/doc/help/" );
-    LocaleString = Pgm().GetLocale()->GetCanonicalName();
-
-    wxString path_tmp = FullPath;
-#ifdef __WINDOWS__
-    path_tmp.MakeLower();
-#endif
-    if( path_tmp.Contains( wxT( "kicad" ) ) )
-    {
-        if( wxDirExists( FullPath ) )
-            PathFound = true;
-    }
-
-    /* find kicad/help/ from environment variable  KICAD */
-    if( !PathFound && Pgm().IsKicadEnvVariableDefined() )
-    {
-        FullPath = Pgm().GetKicadEnvVariable() + wxT( "/doc/help/" );
-
-        if( wxDirExists( FullPath ) )
-            PathFound = true;
-    }
-
-    /* find kicad/help/ from "s_HelpPathList" */
-    int ii = 0;
-
-    while( !PathFound )
-    {
-        FullPath = s_HelpPathList[ii++];
-
-        if( FullPath == wxT( "end_list" ) )
-            break;
-
-        if( wxDirExists( FullPath ) )
-            PathFound = true;
-    }
-
-    if( PathFound )
-    {
-        LangFullPath = FullPath + LocaleString + UNIX_STRING_DIR_SEP;
-
-        if( wxDirExists( LangFullPath ) )
-            return LangFullPath;
-
-        LangFullPath = FullPath + LocaleString.Left( 2 ) + UNIX_STRING_DIR_SEP;
-
-        if( wxDirExists( LangFullPath ) )
-            return LangFullPath;
-
-        LangFullPath = FullPath + wxT( "en/" );
-
-        if( wxDirExists( LangFullPath ) )
-        {
-            return LangFullPath;
-        }
-        else
-        {
-            LangFullPath = FullPath + wxT( "fr/" );
-
-            if( wxDirExists( LangFullPath ) )
-                return LangFullPath;
-        }
-        return FullPath;
-    }
-    return wxEmptyString;
-}
-
-
 wxString FindKicadFile( const wxString& shortname )
 {
-    wxString FullFileName;
-
-    /* Test the presence of the file in the directory shortname of
-     * the KiCad binary path.
-     */
-    FullFileName = Pgm().GetExecutablePath() + shortname;
+    // Test the presence of the file in the directory shortname of
+    // the KiCad binary path.
+    wxString fullFileName = Pgm().GetExecutablePath() + shortname;
 
-    if( wxFileExists( FullFileName ) )
-        return FullFileName;
+    if( wxFileExists( fullFileName ) )
+        return fullFileName;
 
-    /* Test the presence of the file in the directory shortname
-     * defined by the environment variable KiCad.
-     */
+    // Test the presence of the file in the directory shortname
+    // defined by the environment variable KiCad.
     if( Pgm().IsKicadEnvVariableDefined() )
     {
-        FullFileName = Pgm().GetKicadEnvVariable() + shortname;
+        fullFileName = Pgm().GetKicadEnvVariable() + shortname;
 
-        if( wxFileExists( FullFileName ) )
-            return FullFileName;
+        if( wxFileExists( fullFileName ) )
+            return fullFileName;
     }
 
-    /* find binary file from default path list:
-     *  /usr/local/kicad/linux or c:/kicad/winexe
-     *  (see s_KicadDataPathList) */
-    int ii = 0;
+    // find binary file from possibilities list:
+    //  /usr/local/kicad/linux or c:/kicad/winexe
 
-    while( 1 )
-    {
-        if( s_KicadBinaryPathList[ii] == wxT( "end_list" ) )
-            break;
+    // Path list for KiCad binary files
+    const static wxChar* possibilities[] = {
+#ifdef __WINDOWS__
+        wxT( "c:/kicad/bin/" ),
+        wxT( "d:/kicad/bin/" ),
+        wxT( "c:/Program Files/kicad/bin/" ),
+        wxT( "d:/Program Files/kicad/bin/" ),
+#else
+        wxT( "/usr/bin/" ),
+        wxT( "/usr/local/bin/" ),
+        wxT( "/usr/local/kicad/bin/" ),
+#endif
+    };
 
-        FullFileName = s_KicadBinaryPathList[ii++] + shortname;
+    for( unsigned i=0;  i<DIM(possibilities);  ++i )
+    {
+        fullFileName = possibilities[i] + shortname;
 
-        if( wxFileExists( FullFileName ) )
-            return FullFileName;
+        if( wxFileExists( fullFileName ) )
+            return fullFileName;
     }
 
     return shortname;
@@ -418,13 +283,13 @@ wxString FindKicadFile( const wxString& shortname )
 int ExecuteFile( wxWindow* frame, const wxString& ExecFile, const wxString& param,
                  wxProcess *callback )
 {
-    wxString FullFileName;
+    wxString fullFileName;
 
 
-    FullFileName = FindKicadFile( ExecFile );
+    fullFileName = FindKicadFile( ExecFile );
 
 #ifdef __WXMAC__
-    if( wxFileExists( FullFileName ) || wxDir::Exists( FullFileName ) )
+    if( wxFileExists( fullFileName ) || wxDir::Exists( fullFileName ) )
     {
         return ProcessExecute( Pgm().GetExecutablePath() + wxT( "/" )
                                + ExecFile + wxT( " " )
@@ -435,16 +300,16 @@ int ExecuteFile( wxWindow* frame, const wxString& ExecFile, const wxString& para
         return ProcessExecute( wxT( "/usr/bin/open " ) + param, wxEXEC_ASYNC, callback );
     }
 #else
-    if( wxFileExists( FullFileName ) )
+    if( wxFileExists( fullFileName ) )
     {
         if( !param.IsEmpty() )
-            FullFileName += wxT( " " ) + param;
+            fullFileName += wxT( " " ) + param;
 
-        return ProcessExecute( FullFileName, wxEXEC_ASYNC, callback );
+        return ProcessExecute( fullFileName, wxEXEC_ASYNC, callback );
     }
 #endif
     wxString msg;
-    msg.Printf( _( "Command <%s> could not found" ), GetChars( FullFileName ) );
+    msg.Printf( _( "Command <%s> could not found" ), GetChars( fullFileName ) );
     DisplayError( frame, msg, 20 );
     return -1;
 }
@@ -452,13 +317,13 @@ int ExecuteFile( wxWindow* frame, const wxString& ExecFile, const wxString& para
 
 wxString KicadDatasPath()
 {
-    bool     PathFound = false;
+    bool     found = false;
     wxString data_path;
 
     if( Pgm().IsKicadEnvVariableDefined() ) // Path defined by the KICAD environment variable.
     {
         data_path = Pgm().GetKicadEnvVariable();
-        PathFound = true;
+        found = true;
     }
     else    // Path of executables.
     {
@@ -485,33 +350,56 @@ wxString KicadDatasPath()
 
             if( wxDirExists( data_path ) )
             {
-                PathFound = true;
+                found = true;
             }
             else if( wxDirExists( old_path ) )
             {
                 data_path = old_path;
-                PathFound = true;
+                found = true;
             }
         }
     }
 
-    /* find KiCad from default path list:
-     *  /usr/local/kicad/ or c:/kicad/
-     *  (see s_KicadDataPathList) */
-    int ii = 0;
-
-    while( !PathFound )
+    if( !found )
     {
-        if( s_KicadDataPathList[ii] == wxT( "end_list" ) )
-            break;
+        // find KiCad from possibilities list:
+        //  /usr/local/kicad/ or c:/kicad/
 
-        data_path = s_KicadDataPathList[ii++];
+        const static wxChar*  possibilities[] = {
+#ifdef __WINDOWS__
+            wxT( "c:/kicad/share/" ),
+            wxT( "d:/kicad/share/" ),
+            wxT( "c:/kicad/" ),
+            wxT( "d:/kicad/" ),
+            wxT( "c:/Program Files/kicad/share/" ),
+            wxT( "d:/Program Files/kicad/share/" ),
+            wxT( "c:/Program Files/kicad/" ),
+            wxT( "d:/Program Files/kicad/" ),
+#else
+            wxT( "/usr/share/kicad/" ),
+            wxT( "/usr/local/share/kicad/" ),
+            wxT( "/usr/local/kicad/share/" ),   // default data path for "universal
+                                                // tarballs" and build for a server
+                                                // (new)
+            wxT( "/usr/local/kicad/" ),         // default data path for "universal
+                                                // tarballs" and build for a server
+                                                // (old)
+#endif
+        };
+
+        for( unsigned i=0;  i<DIM(possibilities);  ++i )
+        {
+            data_path = possibilities[i];
 
-        if( wxDirExists( data_path ) )
-            PathFound = true;
+            if( wxDirExists( data_path ) )
+            {
+                found = true;
+                break;
+            }
+        }
     }
 
-    if( PathFound )
+    if( found )
     {
         data_path.Replace( WIN_STRING_DIR_SEP, UNIX_STRING_DIR_SEP );
 
@@ -569,38 +457,36 @@ bool OpenPDF( const wxString& file )
         }
 
         success = false;
-        command.Empty();
+        command.clear();
 
         if( !success )
         {
-#ifndef __WINDOWS__
+#if !defined(__WINDOWS__)
             AddDelimiterString( filename );
 
-            /* here is a list of PDF viewers candidates */
-            const static wxString tries[] =
+            // here is a list of PDF viewers candidates
+            static const wxChar* tries[] =
             {
                 wxT( "/usr/bin/evince" ),
+                wxT( "/usr/bin/okular" ),
                 wxT( "/usr/bin/gpdf" ),
                 wxT( "/usr/bin/konqueror" ),
                 wxT( "/usr/bin/kpdf" ),
                 wxT( "/usr/bin/xpdf" ),
                 wxT( "/usr/bin/open" ),     // BSD and OSX file & dir opener
                 wxT( "/usr/bin/xdg-open" ), // Freedesktop file & dir opener
-                wxT( "" ),
             };
 
-            for( int ii = 0; ; ii++ )
+            for( unsigned ii = 0;  ii<DIM(tries);  ii++ )
             {
-                if( tries[ii].IsEmpty() )
-                    break;
-
                 if( wxFileExists( tries[ii] ) )
                 {
-                    command = tries[ii] + wxT( " " ) + filename;
+                    command = tries[ii];
+                    command += wxT( ' ' );
+                    command += filename;
                     break;
                 }
             }
-
 #endif
         }
     }

common/kiface_i.cpp

@@ -55,10 +55,11 @@ static void setSearchPaths( SEARCH_STACK* aDst, KIWAY::FACE_T aId )
         // we must add <kicad path>/library and <kicad path>/library/doc
         if( aId == KIWAY::FACE_SCH )
         {
+            // Add schematic doc file path (library/doc) to search path list.
+
             fn.AppendDir( wxT( "library" ) );
             aDst->AddPaths( fn.GetPath() );
 
-            // Add schematic doc file path (library/doc)to search path list.
             fn.AppendDir( wxT( "doc" ) );
             aDst->AddPaths( fn.GetPath() );
 
@@ -85,8 +86,10 @@ static void setSearchPaths( SEARCH_STACK* aDst, KIWAY::FACE_T aId )
         aDst->AddPaths( fn.GetPath() );
     }
 
+    aDst->AddPaths( wxT( "/usr/local/share" ) );
+
 #if 1 && defined(DEBUG)
-    aDst->Show( "kiway" );
+    aDst->Show( "kiface" );
 #endif
 }
 
@@ -121,86 +124,3 @@ void KIFACE_I::end_common()
     m_bm.End();
 }
 
-
-wxString KIFACE_I::GetHelpFile()
-{
-    wxString        fn;
-    wxArrayString   subdirs;
-    wxArrayString   altsubdirs;
-
-    // FIXME: This is not the ideal way to handle this.  Unfortunately, the
-    //        CMake install paths seem to be a moving target so this crude
-    //        hack solves the problem of install path differences between
-    //        Windows and non-Windows platforms.
-
-    // Partially fixed, but must be enhanced
-
-    // Create subdir tree for "standard" linux distributions, when KiCad comes
-    // from a distribution files are in /usr/share/doc/kicad/help and binaries
-    // in /usr/bin or /usr/local/bin
-    subdirs.Add( wxT( "share" ) );
-    subdirs.Add( wxT( "doc" ) );
-    subdirs.Add( wxT( "kicad" ) );
-    subdirs.Add( wxT( "help" ) );
-
-    // Create subdir tree for linux and Windows KiCad pack.
-    // Note  the pack form under linux is also useful if a user wants to
-    // install KiCad to a server because there is only one path to mount
-    // or export (something like /usr/local/kicad).
-    // files are in <install dir>/kicad/doc/help
-    // (often /usr/local/kicad/kicad/doc/help)
-    // <install dir>/kicad/ is retrieved from m_BinDir
-    altsubdirs.Add( wxT( "doc" ) );
-    altsubdirs.Add( wxT( "help" ) );
-
-    /* Search for a help file.
-     *  we *must* find a help file.
-     *  so help is searched in directories in this order:
-     *  help/<canonical name> like help/en_GB
-     *  help/<short name> like help/en
-     *  help/en
-     */
-
-    wxLocale* i18n = Pgm().GetLocale();
-
-    // Step 1 : Try to find help file in help/<canonical name>
-    subdirs.Add( i18n->GetCanonicalName() );
-    altsubdirs.Add( i18n->GetCanonicalName() );
-
-    fn = m_bm.m_search.FindFileInSearchPaths( m_bm.m_help_file, &altsubdirs );
-
-    if( !fn  )
-        fn = m_bm.m_search.FindFileInSearchPaths( m_bm.m_help_file, &subdirs );
-
-    // Step 2 : if not found Try to find help file in help/<short name>
-    if( !fn  )
-    {
-        subdirs.RemoveAt( subdirs.GetCount() - 1 );
-        altsubdirs.RemoveAt( altsubdirs.GetCount() - 1 );
-
-        // wxLocale::GetName() does not return always the short name
-        subdirs.Add( i18n->GetName().BeforeLast( '_' ) );
-        altsubdirs.Add( i18n->GetName().BeforeLast( '_' ) );
-
-        fn = m_bm.m_search.FindFileInSearchPaths( m_bm.m_help_file, &altsubdirs );
-
-        if( !fn )
-            fn = m_bm.m_search.FindFileInSearchPaths( m_bm.m_help_file, &subdirs );
-    }
-
-    // Step 3 : if not found Try to find help file in help/en
-    if( !fn )
-    {
-        subdirs.RemoveAt( subdirs.GetCount() - 1 );
-        altsubdirs.RemoveAt( altsubdirs.GetCount() - 1 );
-        subdirs.Add( wxT( "en" ) );
-        altsubdirs.Add( wxT( "en" ) );
-
-        fn = m_bm.m_search.FindFileInSearchPaths( m_bm.m_help_file, &altsubdirs );
-
-        if( !fn )
-            fn = m_bm.m_search.FindFileInSearchPaths( m_bm.m_help_file, &subdirs );
-    }
-
-    return fn;
-}

common/page_layout/page_layout_reader.cpp

@@ -744,7 +744,7 @@ void WORKSHEET_LAYOUT::SetDefaultLayout()
     {
         lp_parser.Parse( this );
     }
-    catch( IO_ERROR ioe )
+    catch( const IO_ERROR& ioe )
     {
         wxLogMessage( ioe.errorText );
     }
@@ -765,7 +765,7 @@ void WORKSHEET_LAYOUT::SetPageLayout( const char* aPageLayout, bool Append )
     {
         lp_parser.Parse( this );
     }
-    catch( IO_ERROR ioe )
+    catch( const IO_ERROR& ioe )
     {
         wxLogMessage( ioe.errorText );
     }
@@ -828,7 +828,7 @@ void WORKSHEET_LAYOUT::SetPageLayout( const wxString& aFullFileName, bool Append
         {
             lp_parser.Parse( this );
         }
-        catch( IO_ERROR ioe )
+        catch( const IO_ERROR& ioe )
         {
             wxLogMessage( ioe.errorText );
         }

common/pgm_base.cpp

@@ -297,6 +297,13 @@ void PGM_BASE::destroy()
     delete m_locale;
     m_locale = 0;
 
+    /*
+    // Close the help frame
+    if( m_html_ctrl && m_html_ctrl->GetFrame() )    // returns NULL if no help frame active
+        m_html_ctrl->GetFrame()->Close( true );
+    }
+    */
+
     delete m_html_ctrl;
     m_html_ctrl = 0;
 }
@@ -415,30 +422,18 @@ bool PGM_BASE::initPgm()
 }
 
 
-void PGM_BASE::SetHtmlHelpController( wxHtmlHelpController* aController )
+void PGM_BASE::initHtmlHelpController()
 {
-    delete m_html_ctrl;
-    m_html_ctrl = aController;
-}
-
-
-void PGM_BASE::InitOnLineHelp()
-{
-    wxString fullfilename = FindKicadHelpPath();
-
 #if defined ONLINE_HELP_FILES_FORMAT_IS_HTML
-    m_HelpFileName = fullfilename + wxT( ".html" );
-    fullfilename  += wxT( "kicad.hhp" );
 
-    if( wxFileExists( fullfilename ) )
-    {
-        m_html_ctrl = new wxHtmlHelpController( wxHF_TOOLBAR | wxHF_CONTENTS |
-                                               wxHF_PRINT | wxHF_OPEN_FILES
-                                               /*| wxHF_SEARCH */ );
-        m_html_ctrl->UseConfig( m_common_settings );
-        m_html_ctrl->SetTitleFormat( wxT( "KiCad Help" ) );
-        m_html_ctrl->AddBook( fullfilename );
-    }
+    if( !m_html_ctrl )
+        m_html_ctrl = new wxHtmlHelpController(
+                            wxHF_TOOLBAR | wxHF_CONTENTS |
+                            wxHF_PRINT | wxHF_OPEN_FILES
+                            // | wxHF_SEARCH
+                            );
+
+    wxASSERT( m_html_ctrl );    // may not leave here as NULL
 
 #elif defined ONLINE_HELP_FILES_FORMAT_IS_PDF
     m_html_ctrl = NULL;
@@ -449,10 +444,22 @@ void PGM_BASE::InitOnLineHelp()
 }
 
 
+wxHtmlHelpController* PGM_BASE::HtmlHelpController()
+{
+    if( !m_html_ctrl )
+        initHtmlHelpController();
+
+    // there should not be calls to this unless ONLINE_HELP_FILES_FORMAT_IS_HTML is defined
+    wxASSERT( m_html_ctrl );
+
+    return m_html_ctrl;
+}
+
+
+
 bool PGM_BASE::setExecutablePath()
 {
-// Apple MacOSx
-#ifdef __APPLE__
+#ifdef __APPLE__        // Apple MacOSx
 
     // Derive path from location of the app bundle
     CFBundleRef mainBundle = CFBundleGetMainBundle();

common/project.cpp

@@ -23,18 +23,19 @@
  */
 
 
+#include <wx/stdpaths.h>
+
 #include <fctsys.h>
 #include <macros.h>
 #include <gr_basic.h>
 #include <pgm_base.h>
 #include <project.h>
-#include <wx/stdpaths.h>
+#include <confirm.h>
 #include <kicad_string.h>
 #include <config_params.h>
 #include <wildcards_and_files_ext.h>
 
 
-
 PROJECT::PROJECT()
 {
     memset( m_elems, 0, sizeof(m_elems) );
@@ -198,18 +199,18 @@ wxConfigBase* PROJECT::configCreate( const SEARCH_STACK& aSList, const wxString&
             const wxString& aGroupName, bool aForceUseLocalConfig )
 {
     wxConfigBase*   cfg = 0;
-    wxFileName      fn = aFileName;
 
+    wxFileName      fn = aFileName;
     fn.SetExt( ProjectFileExtension );
 
+    wxString        cur_pro_fn = fn.GetFullPath();
+
     // is there an edge transition, a change in m_project_filename?
-    if( m_project_name != fn )
+    if( m_project_name != cur_pro_fn )
     {
         m_sch_search.Clear();
 
-        SetProjectFullName( fn.GetFullPath() );
-
-        // to the empty list, add project dir as first
+        // to the empty lists, add project dir as first
         m_sch_search.AddPaths( fn.GetPath() );
 
         // append all paths from aSList
@@ -228,8 +229,6 @@ wxConfigBase* PROJECT::configCreate( const SEARCH_STACK& aSList, const wxString&
     // Init local config filename
     if( aForceUseLocalConfig || fn.FileExists() )
     {
-        wxString cur_pro_fn = fn.GetFullPath();
-
         cfg = new wxFileConfig( wxEmptyString, wxEmptyString, cur_pro_fn, wxEmptyString );
 
         cfg->DontCreateOnDemand();
@@ -262,31 +261,43 @@ wxConfigBase* PROJECT::configCreate( const SEARCH_STACK& aSList, const wxString&
         }
         else    // Version incorrect
         {
+            wxLogDebug( wxT( "Project file version is zero, not using this old project file, going with template." ) );
             delete cfg;
             cfg = 0;
         }
     }
 
-    // Search for the template kicad.pro file by using caller's SEARCH_STACK.
+    // No suitable pro file was found, either does not exist, or is too old.
+    // Use the template kicad.pro file.  Find it by using caller's SEARCH_STACK.
 
     wxString kicad_pro_template = aSList.FindValidPath( wxT( "kicad.pro" ) );
 
     if( !kicad_pro_template )
     {
-        wxLogDebug( wxT( "Template file <kicad.pro> not found." ) );
+        wxLogDebug( wxT( "Template file <kicad.pro> not found using search paths." ) );
 
-        fn = wxFileName( wxStandardPaths::Get().GetDocumentsDir(),
-                         wxT( "kicad" ), ProjectFileExtension );
-    }
-    else
-    {
-        fn = kicad_pro_template;
+        wxFileName  templ( wxStandardPaths::Get().GetDocumentsDir(),
+                            wxT( "kicad" ), ProjectFileExtension );
+
+        if( !templ.IsFileReadable() )
+        {
+            wxString msg = wxString::Format( _( "Unable to find kicad.pro template file." ) );
+
+            DisplayError( NULL, msg );
+
+            return NULL;
+        }
+
+        kicad_pro_template = templ.GetFullPath();
     }
 
-    cfg = new wxFileConfig( wxEmptyString, wxEmptyString, wxEmptyString, fn.GetFullPath() );
+    // copy the template to cur_pro_fn, and open it at that destination.
+    wxCopyFile( kicad_pro_template, cur_pro_fn );
+    cfg = new wxFileConfig( wxEmptyString, wxEmptyString, cur_pro_fn, wxEmptyString );
+
     cfg->DontCreateOnDemand();
 
-    SetProjectFullName( fn.GetFullPath() );
+    SetProjectFullName( cur_pro_fn );
     return cfg;
 }
 
@@ -296,6 +307,12 @@ void PROJECT::ConfigSave( const SEARCH_STACK& aSList, const wxString&  aFileName
 {
     std::auto_ptr<wxConfigBase> cfg( configCreate( aSList, aFileName, aGroupName, FORCE_LOCAL_CONFIG ) );
 
+    if( !cfg.get() )
+    {
+        // could not find template
+        return;
+    }
+
     cfg->SetPath( wxCONFIG_PATH_SEPARATOR );
 
     cfg->Write( wxT( "update" ), DateAndTime() );
@@ -326,6 +343,12 @@ bool PROJECT::ConfigLoad( const SEARCH_STACK& aSList, const wxString& aFileName,
 {
     std::auto_ptr<wxConfigBase> cfg( configCreate( aSList, aFileName, aGroupName, false ) );
 
+    if( !cfg.get() )
+    {
+        // could not find template
+        return false;
+    }
+
     cfg->SetPath( wxCONFIG_PATH_SEPARATOR );
 
     wxString timestamp = cfg->Read( wxT( "update" ) );

common/search_stack.cpp

@@ -104,31 +104,6 @@ void SEARCH_STACK::AddPaths( const wxString& aPaths, int aIndex )
 }
 
 
-wxString SEARCH_STACK::FindFileInSearchPaths(
-        const wxString& aFilename, const wxArrayString* aSubdirs )
-{
-    wxPathList paths;
-
-    for( unsigned i = 0; i < GetCount(); ++i )
-    {
-        wxFileName fn( (*this)[i] );
-
-        if( aSubdirs )
-        {
-            for( unsigned j = 0; j < aSubdirs->GetCount(); j++ )
-                fn.AppendDir( (*aSubdirs)[j] );
-        }
-
-        if( fn.DirExists() )
-        {
-            paths.Add( fn.GetPath() );
-        }
-    }
-
-    return paths.FindValidPath( aFilename );
-}
-
-
 void RETAINED_PATH::Clear()
 {
     m_retained_path.Clear();

common/searchhelpfilefullpath.cpp

+
+#include <pgm_base.h>
+#include <common.h>
+
+
+
+/**
+ * Function FindFileInSearchPaths
+ * looks in "this" for \a aFilename, but first modifies every search
+ * path by appending a list of path fragments from aSubdirs.  That modification
+ * is not rentative.
+ */
+wxString FindFileInSearchPaths( const SEARCH_STACK& aStack,
+        const wxString& aFilename, const wxArrayString* aSubdirs )
+{
+    wxPathList paths;
+
+    for( unsigned i = 0; i < aStack.GetCount(); ++i )
+    {
+        wxFileName fn( aStack[i], wxEmptyString );
+
+        if( aSubdirs )
+        {
+            for( unsigned j = 0; j < aSubdirs->GetCount(); j++ )
+                fn.AppendDir( (*aSubdirs)[j] );
+        }
+
+        if( fn.DirExists() )
+        {
+            paths.Add( fn.GetPath() );
+        }
+    }
+
+    return paths.FindValidPath( aFilename );
+}
+
+
+// See also FindKicadHelpPath.cpp.notused.
+wxString SearchHelpFileFullPath( const SEARCH_STACK& aSStack, const wxString& aBaseName )
+{
+    wxArrayString   subdirs;
+    wxArrayString   altsubdirs;
+    SEARCH_STACK    ss = aSStack;
+
+    // It might already be in aSStack, but why depend on other code
+    // far away when it's so easy to add it again (to our copy) as the first place to look.
+    // This is CMAKE_INSTALL_PREFIX:
+    ss.AddPaths( wxT( DEFAULT_INSTALL_PATH ), 0 );
+
+    // If there's a KICAD environment variable set, use that guy's path also
+    ss.AddPaths( Pgm().GetKicadEnvVariable(), 0 );
+
+#if 1 // && defined(__linux__)
+    // Based on kicad-doc.bzr/CMakeLists.txt, line 20, the help files are
+    // installed into "<CMAKE_INSTALL_PREFIX>/share/doc/kicad/help" for linux.
+    // This is ${KICAD_HELP} var in that CMakeLists.txt file.
+    // Below we account for an international subdirectory.
+    subdirs.Add( wxT( "share" ) );
+    subdirs.Add( wxT( "doc" ) );
+    subdirs.Add( wxT( "kicad" ) );
+    subdirs.Add( wxT( "help" ) );
+#endif
+
+#if 1 // && defined(__WINDOWS__)
+    // Based on kicad-doc.bzr/CMakeLists.txt, line 35, the help files are
+    // installed into "<CMAKE_INSTALL_PREFIX>/doc/help" for Windows.
+    // This is ${KICAD_HELP} var in that CMakeLists.txt file.
+    // Below we account for an international subdirectory.
+    altsubdirs.Add( wxT( "doc" ) );
+    altsubdirs.Add( wxT( "help" ) );
+#endif
+
+    /* Search for a help file.
+     *  we *must* find a help file.
+     *  so help is searched in directories in this order:
+     *  help/<canonical name> like help/en_GB
+     *  help/<short name> like help/en
+     *  help/en
+     */
+
+    wxLocale* i18n = Pgm().GetLocale();
+
+    // Step 1 : Try to find help file in help/<canonical name>
+    subdirs.Add( i18n->GetCanonicalName() );
+    altsubdirs.Add( i18n->GetCanonicalName() );
+
+#if defined(DEBUG) && 0
+    ss.Show( __func__ );
+    printf( "%s: m_help_file:'%s'\n", __func__, TO_UTF8( aBaseName ) );
+#endif
+
+    wxString fn = FindFileInSearchPaths( ss, aBaseName, &altsubdirs );
+
+    if( !fn  )
+        fn = FindFileInSearchPaths( ss, aBaseName, &subdirs );
+
+    // Step 2 : if not found Try to find help file in help/<short name>
+    if( !fn  )
+    {
+        subdirs.RemoveAt( subdirs.GetCount() - 1 );
+        altsubdirs.RemoveAt( altsubdirs.GetCount() - 1 );
+
+        // wxLocale::GetName() does not return always the short name
+        subdirs.Add( i18n->GetName().BeforeLast( '_' ) );
+        altsubdirs.Add( i18n->GetName().BeforeLast( '_' ) );
+
+        fn = FindFileInSearchPaths( ss, aBaseName, &altsubdirs );
+
+        if( !fn )
+            fn = FindFileInSearchPaths( ss, aBaseName, &subdirs );
+    }
+
+    // Step 3 : if not found Try to find help file in help/en
+    if( !fn )
+    {
+        subdirs.RemoveAt( subdirs.GetCount() - 1 );
+        altsubdirs.RemoveAt( altsubdirs.GetCount() - 1 );
+        subdirs.Add( wxT( "en" ) );
+        altsubdirs.Add( wxT( "en" ) );
+
+        fn = FindFileInSearchPaths( ss, aBaseName, &altsubdirs );
+
+        if( !fn )
+            fn = FindFileInSearchPaths( ss, aBaseName, &subdirs );
+    }
+
+    return fn;
+}

common/single_top.cpp

@@ -34,6 +34,7 @@
 */
 
 
+#include <typeinfo>
 #include <macros.h>
 #include <fctsys.h>
 #include <wx/dynlib.h>
@@ -182,10 +183,6 @@ static const wxString dso_full_path( const wxString& aAbsoluteArgv0 )
     return fn.GetFullPath();
 }
 
-// Use of this is arbitrary, remember single_top only knows about a single DSO.
-// Could have used one from the KIWAY also.
-static wxDynamicLibrary dso;
-
 
 // Only a single KIWAY is supported in this single_top top level component,
 // which is dedicated to loading only a single DSO.
@@ -230,6 +227,32 @@ struct APP_SINGLE_TOP : public wxApp
         return wxApp::OnExit();
     }
 
+    int OnRun()             // overload wxApp virtual
+    {
+        try
+        {
+            return wxApp::OnRun();
+        }
+        catch( const std::exception& e )
+        {
+            wxLogError( wxT( "Unhandled exception class: %s  what: %s" ),
+                GetChars( FROM_UTF8( typeid(e).name() )),
+                GetChars( FROM_UTF8( e.what() ) ) );;
+        }
+        catch( const IO_ERROR& ioe )
+        {
+            wxLogError( wxT( "Unhandled exception class: %s  what: %s" ),
+                GetChars( FROM_UTF8( typeid( ioe ).name() ) ),
+                GetChars( ioe.errorText ) );
+        }
+        catch(...)
+        {
+            wxLogError( wxT( "Unhandled exception of unknown type" ) );
+        }
+
+        return -1;
+    }
+
     /**
      * Function MacOpenFile
      * is specific to MacOSX (not used under Linux or Windows).
@@ -261,6 +284,15 @@ IMPLEMENT_APP( APP_SINGLE_TOP );
 static KIFACE_GETTER_FUNC* get_kiface_getter( const wxString& aDSOName )
 {
 #if defined(BUILD_KIWAY_DLL)
+
+    // Remember single_top only knows about a single DSO.  Using an automatic
+    // with a defeated destructor, see Detach() below, so that the DSO program
+    // image stays in RAM until process termination, and specifically
+    // beyond the point in time at which static destructors are run.  Otherwise
+    // a static wxDynamicLibrary's destructor might create an out of sequence
+    // problem.  This was never detected, so it's only a preventative strategy.
+    wxDynamicLibrary dso;
+
     void*   addr = NULL;
 
     if( !dso.Load( aDSOName, wxDL_VERBATIM | wxDL_NOW ) )
@@ -275,6 +307,9 @@ static KIFACE_GETTER_FUNC* get_kiface_getter( const wxString& aDSOName )
         // No further reporting required here.
     }
 
+    // Tell dso's wxDynamicLibrary destructor not to Unload() the program image.
+    (void) dso.Detach();
+
     return (KIFACE_GETTER_FUNC*) addr;
 
 #else

cvpcb/autosel.cpp

@@ -107,7 +107,7 @@ void CVPCB_MAINFRAME::AssocieModule( wxCommandEvent& event )
         {
             fn.SetExt( fn.GetExt() + wxT( "." ) + FootprintAliasFileExtension );
         }
-        tmp = search.FindValidPath( fn );
+        tmp = search.FindValidPath( fn.GetFullPath() );
 
         if( !tmp )
         {

cvpcb/cfg.cpp

@@ -27,7 +27,7 @@
  */
 
 #include <fctsys.h>
-#include <pgm_base.h>
+#include <kiface_i.h>
 #include <fp_lib_table.h>
 #include <id.h>
 #include <common.h>
@@ -42,29 +42,24 @@
 #include <class_DisplayFootprintsFrame.h>
 
 
-#define GROUP wxT("/cvpcb")
-#define GROUPLIB wxT("/pcbnew/libraries")
-#define GROUPEQU wxT("/cvpcb/libraries")
-
-
 PARAM_CFG_ARRAY& CVPCB_MAINFRAME::GetProjectFileParameters()
 {
     if( !m_projectFileParams.empty() )
         return m_projectFileParams;
 
-    m_projectFileParams.push_back( new PARAM_CFG_BASE( GROUPLIB, PARAM_COMMAND_ERASE ) );
+    m_projectFileParams.push_back( new PARAM_CFG_BASE( GROUP_PCB_LIBS, PARAM_COMMAND_ERASE ) );
 
     m_projectFileParams.push_back( new PARAM_CFG_LIBNAME_LIST(
-        wxT( "LibName" ), &m_ModuleLibNames, GROUPLIB ) );
+        wxT( "LibName" ), &m_ModuleLibNames, GROUP_PCB_LIBS ) );
 
     m_projectFileParams.push_back( new PARAM_CFG_LIBNAME_LIST(
-        wxT( "EquName" ), &m_AliasLibNames, GROUPEQU ) );
+        wxT( "EquName" ), &m_AliasLibNames, GROUP_CVP_EQU ) );
 
     m_projectFileParams.push_back( new PARAM_CFG_WXSTRING(
         wxT( "NetIExt" ), &m_NetlistFileExtension ) );
 
     m_projectFileParams.push_back( new PARAM_CFG_FILENAME(
-        wxT( "LibDir" ), &m_UserLibraryPath, GROUPLIB ) );
+        wxT( "LibDir" ), &m_UserLibraryPath, GROUP_PCB_LIBS ) );
 
     return m_projectFileParams;
 }
@@ -81,7 +76,7 @@ void CVPCB_MAINFRAME::LoadProjectFile( const wxString& aFileName )
     fn.SetExt( ProjectFileExtension );
 
     // was: Pgm().ReadProjectConfig( fn.GetFullPath(), GROUP, GetProjectFileParameters(), false );
-    prj.ConfigLoad( prj.PcbSearchS(), fn.GetFullPath(), GROUP, GetProjectFileParameters(), false );
+    prj.ConfigLoad( Kiface().KifaceSearch(), fn.GetFullPath(), GROUP_CVP, GetProjectFileParameters(), false );
 
     if( m_NetlistFileExtension.IsEmpty() )
         m_NetlistFileExtension = wxT( "net" );
@@ -133,7 +128,7 @@ void CVPCB_MAINFRAME::SaveProjectFile( wxCommandEvent& aEvent )
     // Pgm().WriteProjectConfig( fn.GetFullPath(), GROUP, GetProjectFileParameters() );
 
     PROJECT&        prj = Prj();
-    SEARCH_STACK&   search = prj.SchSearchS();
 
-    prj.ConfigSave( search, fn.GetFullPath(), GROUP, GetProjectFileParameters() );
+    prj.ConfigSave( Kiface().KifaceSearch(), fn.GetFullPath(), GROUP_CVP, GetProjectFileParameters() );
 }
+

cvpcb/class_DisplayFootprintsFrame.cpp

@@ -490,7 +490,7 @@ MODULE* DISPLAY_FOOTPRINTS_FRAME::Get_Module( const wxString& aFootprintName )
 
         footprint = FootprintLibs()->FootprintLoad( FROM_UTF8( nickname.c_str() ), FROM_UTF8( fpname.c_str() ) );
     }
-    catch( IO_ERROR ioe )
+    catch( const IO_ERROR& ioe )
     {
         DisplayError( this, ioe.errorText );
         return NULL;

cvpcb/cvframe.cpp

@@ -301,13 +301,6 @@ void CVPCB_MAINFRAME::OnCloseWindow( wxCloseEvent& Event )
         }
     }
 
-    // Close the help frame
-    if( Pgm().GetHtmlHelpController() )
-    {
-        if( Pgm().GetHtmlHelpController()->GetFrame() )// returns NULL if no help frame active
-            Pgm().GetHtmlHelpController()->GetFrame()->Close( true );
-    }
-
     if( m_NetlistFileName.IsOk() )
     {
         UpdateFileHistory( m_NetlistFileName.GetFullPath() );
@@ -846,7 +839,7 @@ int CVPCB_MAINFRAME::ReadSchematicNetlist()
         else
             wxMessageBox( _( "Unknown netlist format." ), wxEmptyString, wxOK | wxICON_ERROR );
     }
-    catch( IO_ERROR& ioe )
+    catch( const IO_ERROR& ioe )
     {
         msg = wxString::Format( _( "Error loading netlist.\n%s" ), ioe.errorText.GetData() );
         wxMessageBox( msg, _( "Netlist Load Error" ), wxOK | wxICON_ERROR );

cvpcb/readwrite_dlgs.cpp

@@ -119,6 +119,20 @@ void CVPCB_MAINFRAME::SetNewPkg( const wxString& aFootprintName )
 }
 
 
+#if 0
+
+    /*
+
+    This code block was based on two major assumptions that are no longer true:
+    1) Footprint library basenames would remain the same.
+    (But no, basenames have been renamed in the github repo.)
+    2) *.mod files would still be around and merely reside in the FP_LIB_TABLE.
+    (But no, they have been converted to *.pretty.)
+
+    There is a newer replacement code block in the #else region.
+
+    */
+
 /**
  * Function missingLegacyLibs
  * tests the list of \a aLibNames by URI to determine if any of them are missing from
@@ -138,23 +152,175 @@ void CVPCB_MAINFRAME::SetNewPkg( const wxString& aFootprintName )
 static bool missingLegacyLibs( FP_LIB_TABLE* aTbl, SEARCH_STACK& aSStack,
         const wxArrayString& aLibNames, wxString* aErrorMsg )
 {
-    bool retv = false;
+    bool missing = false;
 
     for( unsigned i = 0;  i < aLibNames.GetCount();  i++ )
     {
         wxFileName  fn( wxEmptyString, aLibNames[i], LegacyFootprintLibPathExtension );
 
-        wxString    legacyLibPath = aSStack.FindValidPath( fn );
+        wxString    legacyLibPath = aSStack.FindValidPath( fn.GetFullPath() );
 
+        /*
         if( legacyLibPath.IsEmpty() )
             continue;
+        */
 
-        if( aTbl->FindRowByURI( legacyLibPath ) == 0 )
+        if( !aTbl->FindRowByURI( legacyLibPath ) )
         {
-            retv = true;
+            missing = true;
 
             if( aErrorMsg )
-                *aErrorMsg += wxT( "\"" ) + legacyLibPath + wxT( "\"\n" );
+            {
+                *aErrorMsg += wxChar( '"' );
+
+                if( !legacyLibPath )
+                    *aErrorMsg += !legacyLibPath ? aLibNames[i] : legacyLibPath;
+
+                *aErrorMsg += wxT( "\"\n" );
+            }
+        }
+    }
+
+    return missing;
+}
+
+
+/**
+ * Function convertFromLegacy
+ * converts the footprint names in \a aNetList from the legacy format to the #FPID format.
+ *
+ * @param aNetList is the #NETLIST object to convert.
+ * @param aLibNames is the list of legacy footprint library names from the currently loaded
+ *                  project.
+ * @param aReporter is the #REPORTER object to dump messages into.
+ * @return true if all footprint names were successfully converted to a valid FPID.
+ */
+static bool convertFromLegacy( FP_LIB_TABLE* aTbl, SEARCH_STACK& aSStack, NETLIST& aNetList,
+        const wxArrayString& aLibNames, REPORTER* aReporter = NULL ) throw( IO_ERROR )
+{
+    wxString   msg;
+    FPID       lastFPID;
+    COMPONENT* component;
+    MODULE*    module = 0;
+    bool       retv = true;
+
+    if( aNetList.IsEmpty() )
+        return true;
+
+    aNetList.SortByFPID();
+
+    wxString   libPath;
+
+    PLUGIN::RELEASER pi( IO_MGR::PluginFind( IO_MGR::LEGACY ) );
+
+    for( unsigned ii = 0; ii < aNetList.GetCount(); ii++ )
+    {
+        component = aNetList.GetComponent( ii );
+
+        // The footprint hasn't been assigned yet so ignore it.
+        if( component->GetFPID().empty() )
+            continue;
+
+        if( component->GetFPID() != lastFPID )
+        {
+            module = NULL;
+
+            for( unsigned ii = 0; ii < aLibNames.GetCount(); ii++ )
+            {
+                wxFileName fn( wxEmptyString, aLibNames[ii], LegacyFootprintLibPathExtension );
+
+                libPath = aSStack.FindValidPath( fn.GetFullPath() );
+
+                if( !libPath )
+                {
+                    if( aReporter )
+                    {
+                        msg.Printf( _( "Cannot find footprint library file '%s' in any of the "
+                                       "KiCad legacy library search paths.\n" ),
+                                    GetChars( fn.GetFullPath() ) );
+                        aReporter->Report( msg );
+                    }
+
+                    retv = false;
+                    continue;
+                }
+
+                module = pi->FootprintLoad( libPath, component->GetFPID().GetFootprintName() );
+
+                if( module )
+                {
+                    lastFPID = component->GetFPID();
+                    break;
+                }
+            }
+        }
+
+        if( !module )
+        {
+            if( aReporter )
+            {
+                msg.Printf( _( "Component '%s' footprint '%s' was not found in any legacy "
+                               "library.\n" ),
+                            GetChars( component->GetReference() ),
+                            GetChars( component->GetFPID().Format() ) );
+                aReporter->Report( msg );
+            }
+
+            // Clear the footprint assignment since the old library lookup method is no
+            // longer valid.
+            FPID emptyFPID;
+
+            component->SetFPID( emptyFPID );
+            retv = false;
+            continue;
+        }
+        else
+        {
+            wxString    libNickname;
+
+            const FP_LIB_TABLE::ROW* row;
+
+            if( ( row = aTbl->FindRowByURI( libPath ) ) != NULL )
+                libNickname = row->GetNickName();
+
+            if( libNickname.IsEmpty() )
+            {
+                if( aReporter )
+                {
+                    msg.Printf( _( "Component '%s' with footprint '%s' and legacy library path '%s' "
+                                   "was not found in the footprint library table.\n" ),
+                                GetChars( component->GetReference() ),
+                                GetChars( component->GetFPID().Format() ),
+                                GetChars( libPath )
+                                );
+                    aReporter->Report( msg );
+                }
+
+                retv = false;
+            }
+            else
+            {
+                FPID newFPID = lastFPID;
+                newFPID.SetLibNickname( libNickname );
+
+                if( !newFPID.IsValid() )
+                {
+                    if( aReporter )
+                    {
+                        msg.Printf( _( "Component '%s' FPID '%s' is not valid.\n" ),
+                                    GetChars( component->GetReference() ),
+                                    GetChars( newFPID.Format() ) );
+                        aReporter->Report( msg );
+                    }
+
+                    retv = false;
+                }
+                else
+                {
+                    // The footprint name should already be set.
+                    component->SetFPID( newFPID );
+                }
+            }
         }
     }
 
@@ -210,7 +376,7 @@ bool CVPCB_MAINFRAME::ReadNetListAndLinkFiles()
         if( missingLegacyLibs( FootprintLibs(), Prj().PcbSearchS(), m_ModuleLibNames, &missingLibs ) )
         {
             msg = wxT( "The following legacy libraries are defined in the project file "
-                       "were not found in the footprint library table:\n\n" ) + missingLibs;
+                       "but were not found in the footprint library table:\n\n" ) + missingLibs;
             msg += wxT( "\nDo you want to update the footprint library table before "
                         "attempting to update the assigned footprints?" );
 
@@ -233,11 +399,11 @@ bool CVPCB_MAINFRAME::ReadNetListAndLinkFiles()
 
             SEARCH_STACK&   search = Prj().SchSearchS();
 
-            if( !FootprintLibs()->ConvertFromLegacy( search, m_netlist, m_ModuleLibNames, &reporter ) )
+            if( !convertFromLegacy( FootprintLibs(), search, m_netlist, m_ModuleLibNames, &reporter ) )
             {
                 HTML_MESSAGE_BOX dlg( this, wxEmptyString );
 
-                dlg.MessageSet( wxT( "The following errors occurred attempt to convert the "
+                dlg.MessageSet( wxT( "The following errors occurred attempting to convert the "
                                      "footprint assignments:\n\n" ) );
                 dlg.ListSet( msg );
                 dlg.MessageSet( wxT( "\nYou will need to reassign them manually if you want them "
@@ -291,6 +457,210 @@ bool CVPCB_MAINFRAME::ReadNetListAndLinkFiles()
     return true;
 }
 
+#else   // new strategy
+
+/// Return true if the resultant FPID has a certain nickname.  The guess
+/// is only made if this footprint resides in only one library.
+/// @return int - 0 on success, 1 on not found, 2 on ambiguous i.e. multiple matches
+static int guessNickname( FP_LIB_TABLE* aTbl, FPID* aFootprintId )
+{
+    if( aFootprintId->GetLibNickname().size() )
+        return 0;
+
+    wxString    nick;
+    wxString    fpname = aFootprintId->GetFootprintName();
+
+    std::vector<wxString> nicks = aTbl->GetLogicalLibs();
+
+    // Search each library going through libraries alphabetically.
+    for( unsigned libNdx = 0;  libNdx<nicks.size();  ++libNdx )
+    {
+        wxArrayString fpnames = aTbl->FootprintEnumerate( nicks[libNdx] );
+
+        for( unsigned nameNdx = 0;  nameNdx<fpnames.size();   ++nameNdx )
+        {
+            if( fpname == fpnames[nameNdx] )
+            {
+                if( !nick )
+                    nick = nicks[libNdx];
+                else
+                    return 2;       // duplicate, the guess would not be certain
+            }
+        }
+    }
+
+    if( nick.size() )
+    {
+        aFootprintId->SetLibNickname( nick );
+        return 0;
+    }
+
+    return 1;
+}
+
+
+bool CVPCB_MAINFRAME::ReadNetListAndLinkFiles()
+{
+    wxString        msg;
+    bool            hasMissingNicks = false;
+    FP_LIB_TABLE*   tbl = FootprintLibs();
+
+    ReadSchematicNetlist();
+
+    if( m_ListCmp == NULL )
+        return false;
+
+    LoadProjectFile( m_NetlistFileName.GetFullPath() );
+    LoadFootprintFiles();
+    BuildFOOTPRINTS_LISTBOX();
+    BuildLIBRARY_LISTBOX();
+
+    m_ListCmp->Clear();
+    m_undefinedComponentCnt = 0;
+
+    if( m_netlist.AnyFootprintsLinked() )
+    {
+        for( unsigned i = 0;  i < m_netlist.GetCount();  i++ )
+        {
+            COMPONENT* component = m_netlist.GetComponent( i );
+
+            if( component->GetFPID().empty() )
+                continue;
+
+            if( component->GetFPID().IsLegacy() )
+                hasMissingNicks = true;
+        }
+    }
+
+    // Check if footprint links were generated before the footprint library table was implemented.
+    if( hasMissingNicks )
+    {
+        msg = wxT(
+            "Some of the assigned footprints are legacy entries (are missing lib nicknames). "
+            "Would you like CvPcb to attempt to convert them to the new required FPID format? "
+            "(If you answer no, then these assignments will be cleared out and you will "
+            "have to re-assign these footprints yourself.)"
+            );
+
+        if( IsOK( this, msg ) )
+        {
+            msg.Clear();
+
+            try
+            {
+                for( unsigned i = 0;  i < m_netlist.GetCount();  i++ )
+                {
+                    COMPONENT* component = m_netlist.GetComponent( i );
+
+                    if( component->GetFPID().IsLegacy() )
+                    {
+                        int guess = guessNickname( tbl, (FPID*) &component->GetFPID() );
+
+                        switch( guess )
+                        {
+                        case 0:
+                            DBG(printf("%s: guessed OK ref:%s  fpid:%s\n", __func__,
+                                TO_UTF8( component->GetReference() ), component->GetFPID().Format().c_str() );)
+                            m_modified = true;
+                            break;
+
+                        case 1:
+                            msg += wxString::Format( _(
+                                    "Component '%s' footprint '%s' was <b>not found</b> in any library.\n" ),
+                                    GetChars( component->GetReference() ),
+                                    GetChars( component->GetFPID().GetFootprintName() )
+                                    );
+                            break;
+
+                        case 2:
+                            msg += wxString::Format( _(
+                                    "Component '%s' footprint '%s' was found in <b>multiple</b> libraries.\n" ),
+                                    GetChars( component->GetReference() ),
+                                    GetChars( component->GetFPID().GetFootprintName() )
+                                    );
+                            break;
+                        }
+                    }
+                }
+            }
+            catch( const IO_ERROR& ioe )
+            {
+                wxString msg = ioe.errorText;
+                msg += wxT( "\n\n" );
+                msg += _( "First check your fp-lib-table entries." );
+
+                wxMessageBox( msg, wxT( "Problematic fp-lib-tables" ) );
+                return false;
+            }
+
+            if( msg.size() )
+            {
+                HTML_MESSAGE_BOX dlg( this, wxEmptyString );
+
+                dlg.MessageSet( wxT( "The following errors occurred attempting to convert the "
+                                     "footprint assignments:\n\n" ) );
+                dlg.ListSet( msg );
+                dlg.MessageSet( wxT( "\nYou will need to reassign them manually if you want them "
+                                     "to be updated correctly the next time you import the "
+                                     "netlist in Pcbnew." ) );
+
+#if 1
+                dlg.ShowModal();
+#else
+                dlg.Fit();
+                dlg.Show( true );   // modeless lets user watch while fixing the problems, but its not working.
+#endif
+            }
+        }
+        else
+        {
+            // Clear the legacy footprint assignments.
+            for( unsigned i = 0;  i < m_netlist.GetCount();  i++ )
+            {
+                COMPONENT* component = m_netlist.GetComponent( i );
+
+                if( component->GetFPID().IsLegacy() )
+                {
+                    component->SetFPID( FPID() /* empty */ );
+                    m_modified = true;
+                }
+            }
+        }
+    }
+
+    for( unsigned i = 0;  i < m_netlist.GetCount();  i++ )
+    {
+        COMPONENT* component = m_netlist.GetComponent( i );
+
+        msg.Printf( CMP_FORMAT, m_ListCmp->GetCount() + 1,
+                    GetChars( component->GetReference() ),
+                    GetChars( component->GetValue() ),
+                    GetChars( FROM_UTF8( component->GetFPID().Format().c_str() ) ) );
+
+        m_ListCmp->AppendLine( msg );
+
+        if( component->GetFPID().empty() )
+        {
+            m_undefinedComponentCnt += 1;
+            continue;
+        }
+    }
+
+    if( !m_netlist.IsEmpty() )
+        m_ListCmp->SetSelection( 0, true );
+
+    DisplayStatus();
+
+    UpdateTitle();
+
+    UpdateFileHistory( m_NetlistFileName.GetFullPath() );
+
+    return true;
+}
+
+
+#endif
+
 
 int CVPCB_MAINFRAME::SaveCmpLinkFile( const wxString& aFullFileName )
 {

eeschema/class_libentry.cpp

@@ -136,7 +136,7 @@ bool LIB_ALIAS::SaveDoc( OUTPUTFORMATTER& aFormatter )
 
         aFormatter.Print( 0, "$ENDCMP\n" );
     }
-    catch( IO_ERROR ioe )
+    catch( const IO_ERROR& ioe )
     {
         return false;
     }

eeschema/class_library.cpp

@@ -731,7 +731,7 @@ bool CMP_LIBRARY::Save( OUTPUTFORMATTER& aFormatter )
 
         aFormatter.Print( 0, "#\n#End Library\n" );
     }
-    catch( IO_ERROR ioe )
+    catch( const IO_ERROR& ioe )
     {
         success = false;
     }
@@ -756,7 +756,7 @@ bool CMP_LIBRARY::SaveDocs( OUTPUTFORMATTER& aFormatter )
 
         aFormatter.Print( 0, "#\n#End Doc Library\n" );
     }
-    catch( IO_ERROR ioe )
+    catch( const IO_ERROR& ioe )
     {
         success = false;
     }

eeschema/dialogs/dialog_bom.cpp

@@ -249,7 +249,7 @@ void DIALOG_BOM::installPluginsList()
         {
             cfg_parser.Parse();
         }
-        catch( IO_ERROR ioe )
+        catch( const IO_ERROR& ioe )
         {
 //            wxLogMessage( ioe.errorText );
         }

eeschema/eelibs_read_libraryfiles.cpp

@@ -62,7 +62,7 @@ void SCH_EDIT_FRAME::LoadLibraries()
 
         if( !fn.FileExists() )
         {
-            tmp = lib_search.FindValidPath( fn );
+            tmp = lib_search.FindValidPath( fn.GetFullPath() );
 
             if( !tmp )
             {

eeschema/eeschema_config.cpp

@@ -368,7 +368,7 @@ PARAM_CFG_ARRAY& SCH_EDIT_FRAME::GetProjectFileParametersList()
                                                            &m_userLibraryPath ) );
     m_projectFileParams.push_back( new PARAM_CFG_LIBNAME_LIST( wxT( "LibName" ),
                                                                &m_componentLibFiles,
-                                                               GROUPLIB ) );
+                                                               GROUP_SCH_LIBS ) );
     m_projectFileParams.push_back( new PARAM_CFG_WXSTRING( wxT( "NetFmtName" ),
                                                          &m_netListFormat) );
 
@@ -408,7 +408,7 @@ bool SCH_EDIT_FRAME::LoadProjectFile( const wxString& aFileName, bool aForceRere
     // extension (.pro).
     fn.SetExt( ProjectFileExtension );
 
-    if( !prj.ConfigLoad( Kiface().KifaceSearch(), fn.GetFullPath(), GROUP,
+    if( !prj.ConfigLoad( Kiface().KifaceSearch(), fn.GetFullPath(), GROUP_SCH,
             GetProjectFileParametersList(), !aForceReread ) )
     {
         m_componentLibFiles = liblist_tmp;
@@ -427,7 +427,7 @@ bool SCH_EDIT_FRAME::LoadProjectFile( const wxString& aFileName, bool aForceRere
     pglayout.SetPageLayout(BASE_SCREEN::m_PageLayoutDescrFileName);
 
     // libraries in the *.pro file take precedence over standard library search paths,
-    // but not over the director of the project, which is at index 0.
+    // but not over the directory of the project, which is at index 0.
     prj.SchSearchS().AddPaths( m_userLibraryPath, 1 );
 
     // If the list is empty, force loading the standard power symbol library.
@@ -464,7 +464,7 @@ void SCH_EDIT_FRAME::SaveProjectSettings( bool aAskForSave )
     }
 
     prj.ConfigSave( Kiface().KifaceSearch(),
-            fn.GetFullPath(), GROUP, GetProjectFileParametersList() );
+            fn.GetFullPath(), GROUP_SCH, GetProjectFileParametersList() );
 }
 
 
@@ -666,7 +666,7 @@ void SCH_EDIT_FRAME::LoadSettings( wxConfigBase* aCfg )
         {
             m_TemplateFieldNames.Parse( &lexer );
         }
-        catch( IO_ERROR& e )
+        catch( const IO_ERROR& e )
         {
             // @todo show error msg
             DBG( printf( "templatefieldnames parsing error: '%s'\n",

eeschema/eeschema_config.h

@@ -4,9 +4,6 @@
 
 #include <config_params.h>
 
-#define GROUP       wxT( "/eeschema" )
-#define GROUPCOMMON wxT( "/common" )
-#define GROUPLIB    wxT( "libraries" )
 
 /* saving parameters option : */
 #define INSETUP true    /* used when the parameter is saved in general config

eeschema/netform.cpp

@@ -1049,7 +1049,7 @@ bool NETLIST_EXPORT_TOOL::WriteKiCadNetList( const wxString& aOutFileName )
 
         xroot->Format( &formatter, 0 );
     }
-    catch( IO_ERROR ioe )
+    catch( const IO_ERROR& ioe )
     {
         DisplayError( NULL, ioe.errorText );
         return false;

eeschema/schframe.cpp

@@ -868,7 +868,7 @@ void SCH_EDIT_FRAME::OnPrint( wxCommandEvent& event )
 
         // was: wxGetApp().WriteProjectConfig( fn.GetFullPath(), GROUP, GetProjectFileParametersList() );
         Prj().ConfigSave( Kiface().KifaceSearch(),
-                fn.GetFullPath(), GROUP, GetProjectFileParametersList() );
+                fn.GetFullPath(), GROUP_SCH, GetProjectFileParametersList() );
     }
 }
 

eeschema/symbedit.cpp

@@ -225,14 +225,14 @@ void LIB_EDIT_FRAME::SaveOneSymbol()
             formatter.Print( 0, "ENDDRAW\n" );
             formatter.Print( 0, "ENDDEF\n" );
         }
-        catch( IO_ERROR ioe )
+        catch( const IO_ERROR& ioe )
         {
             msg.Printf( _( "An error occurred attempting to save symbol file '%s'" ),
                         GetChars( fn.GetFullPath() ) );
             DisplayError( this, msg );
         }
     }
-    catch( IO_ERROR ioe )
+    catch( const IO_ERROR& ioe )
     {
         DisplayError( this, ioe.errorText );
         return;

include/bin_mod.h

@@ -59,6 +59,8 @@ struct BIN_MOD
     wxString            m_help_file;
 
     SEARCH_STACK        m_search;
+
+
 };
 
 #endif // BIN_MOD_H_

include/common.h

@@ -589,4 +589,25 @@ wxString FormatDateLong( const wxDateTime &aDate );
  */
 void SystemDirsAppend( SEARCH_STACK* aSearchStack );
 
+
+/**
+ * Function SearchHelpFileFullPath
+ * returns the help file's full path.
+ * <p>
+ * Return the KiCad help file with path.
+ * If the help file for the current locale is not found, an attempt to find
+ * the English version of the help file is made.
+ * Help file is searched in directories in this order:
+ *  help/\<canonical name\> like help/en_GB
+ *  help/\<short name\> like help/en
+ *  help/en
+ * </p>
+ * @param aSearchStack contains some possible base dirs that may be above the
+ *  the one actually holding @a aBaseName.  These are starting points for nested searches.
+ * @param aBaseName is the name of the help file to search for.
+ * @return  wxEmptyString is returned if aBaseName is not found, else the full path & filename.
+ */
+wxString SearchHelpFileFullPath( const SEARCH_STACK& aSearchStack, const wxString& aBaseName );
+
+
 #endif  // INCLUDE__COMMON_H_

include/config_params.h

@@ -37,6 +37,17 @@
 #include <limits>
 
 
+#define GROUP_PCB           wxT( "/pcbnew" )
+#define GROUP_SCH           wxT( "/eeschema" )
+#define GROUP_PCB_LIBS      wxT( "/pcbnew/libraries" )
+#define GROUP_SCH_LIBS      wxT( "/eeschema/libraries" )
+#define GROUP_COMMON        wxT( "/common" )
+
+#define GROUP_CVP           wxT("/cvpcb")
+//#define GROUP_CVP_LIBS      wxT("/pcbnew/libraries")
+#define GROUP_CVP_EQU       wxT("/cvpcb/libraries")
+
+
 #define CONFIG_VERSION      1
 #define FORCE_LOCAL_CONFIG  true
 

include/fp_lib_table.h

@@ -38,6 +38,7 @@ class wxFileName;
 class OUTPUTFORMATTER;
 class MODULE;
 class FP_LIB_TABLE_LEXER;
+class FPID;
 class NETLIST;
 class REPORTER;
 class SEARCH_STACK;
@@ -455,6 +456,21 @@ public:
 
     //-----</PLUGIN API SUBSET, REBASED ON aNickname>---------------------------
 
+    /**
+     * Function FootprintLoadWithOptionalNickname
+     * loads a footprint having @a aFootprintId with possibly an empty nickname.
+     *
+     * @param aFootprintId the [nickname] & fooprint name of the footprint to load.
+     *
+     * @return  MODULE* - if found caller owns it, else NULL if not found.
+     *
+     * @throw   IO_ERROR if the library cannot be found or read.  No exception
+     *          is thrown in the case where aFootprintName cannot be found.
+     * @throw   PARSE_ERROR if @a aFootprintId is not parsed OK.
+     */
+    MODULE* FootprintLoadWithOptionalNickname( const FPID& aFootprintId )
+        throw( IO_ERROR, PARSE_ERROR );
+
     /**
      * Function GetDescription
      * returns the library desicription from @a aNickname, or an empty string
@@ -499,19 +515,6 @@ public:
      */
     bool IsEmpty( bool aIncludeFallback = true );
 
-    /**
-     * Function ConvertFromLegacy
-     * converts the footprint names in \a aNetList from the legacy format to the #FPID format.
-     *
-     * @param aNetList is the #NETLIST object to convert.
-     * @param aLibNames is the list of legacy footprint library names from the currently loaded
-     *                  project.
-     * @param aReporter is the #REPORTER object to dump messages into.
-     * @return true if all footprint names were successfully converted to a valid FPID.
-     */
-    bool ConvertFromLegacy( SEARCH_STACK& aSStack, NETLIST& aNetList,
-            const wxArrayString& aLibNames, REPORTER* aReporter = NULL ) throw( IO_ERROR );
-
     /**
      * Function ExpandSubstitutions
      * replaces any environment variable references with their values and is

include/fpid.h

@@ -153,7 +153,6 @@ public:
      */
     bool IsValid() const { return !nickname.empty() && !footprint.empty(); }
 
-
     /**
      * Function IsLegacy
      * @return true if the #FPID only has the #footprint name defined.

include/gestfich.h

@@ -89,28 +89,6 @@ int ExecuteFile( wxWindow* frame, const wxString& ExecFile,
  */
 void AddDelimiterString( wxString& string );
 
-/**
- * Function FindKicadHelpPath
- * finds the absolute path for KiCad "help" (or "help/&ltlanguage&gt")
- *  Find path kicad/doc/help/xx/ or kicad/doc/help/:
- *  from BinDir
- *  else from environment variable KICAD
- *  else from one of s_HelpPathList
- *  typically c:/kicad/doc/help or /usr/share/kicad/help
- *            or /usr/local/share/kicad/help
- *  (must have kicad in path name)
- *
- *  xx = iso639-1 language id (2 letters (generic) or 4 letters):
- *  fr = french (or fr_FR)
- *  en = English (or en_GB or en_US ...)
- *  de = deutch
- *  es = spanish
- *  pt = portuguese (or pt_BR ...)
- *
- *  default = en (if not found = fr)
- */
-wxString FindKicadHelpPath();
-
 /**
  * Function KicadDatasPath
  * returns the data path common to KiCad.

include/kiface_i.h

@@ -100,33 +100,17 @@ public:
 
     wxConfigBase* KifaceSettings() const                { return m_bm.m_config; }
 
-    const wxString& GetHelpFileName() const             { return m_bm.m_help_file; }
-    void SetHelpFileName( const wxString& aFileName )   { m_bm.m_help_file = aFileName; }
-
     /**
-     * Function GetHelpFile
-     * gets the help file path.
-     * <p>
-     * Return the KiCad help file with path.  The base paths defined in
-     * m_searchPaths are tested for a valid file.  The path returned can
-     * be relative depending on the paths added to m_searchPaths.  See the
-     * documentation for wxPathList for more information. If the help file
-     * for the current locale is not found, an attempt to find the English
-     * version of the help file is made.
-     * wxEmptyString is returned if help file not found.
-     * Help file is searched in directories in this order:
-     *  help/\<canonical name\> like help/en_GB
-     *  help/\<short name\> like help/en
-     *  help/en
-     * </p>
+     * Function GetHelpFileName
+     * returns just the basename portion of the current help file.
      */
-    wxString GetHelpFile();
+    const wxString& GetHelpFileName() const             { return m_bm.m_help_file; }
 
-    wxFileHistory& GetFileHistory()             { return m_bm.m_history; }
+    wxFileHistory& GetFileHistory()                     { return m_bm.m_history; }
 
     /// Only for DSO specific 'non-library' files.
     /// (The library search path is in the PROJECT class.)
-    SEARCH_STACK&       KifaceSearch()          { return m_bm.m_search; }
+    SEARCH_STACK&       KifaceSearch()                  { return m_bm.m_search; }
 
 private:
     KIWAY::FACE_T       m_id;

include/pgm_base.h

@@ -86,9 +86,7 @@ public:
 
     //----<Cross Module API>-----------------------------------------------------
 
-    VTBL_ENTRY wxHtmlHelpController* GetHtmlHelpController()        { return m_html_ctrl; }
-
-    VTBL_ENTRY void SetHtmlHelpController( wxHtmlHelpController* aController );
+    VTBL_ENTRY wxHtmlHelpController* HtmlHelpController();
 
     VTBL_ENTRY wxConfigBase* CommonSettings() const                 { return m_common_settings; }
 
@@ -161,12 +159,6 @@ public:
 
     VTBL_ENTRY void SetLanguagePath();
 
-    /**
-     * Function InitOnLineHelp
-     * initializes KiCad's online help.
-     */
-    VTBL_ENTRY void InitOnLineHelp();
-
     /**
      * Function ReadPdfBrowserInfos
      * reads the PDF browser choice from the common configuration.
@@ -217,6 +209,8 @@ protected:
      */
     bool initPgm();
 
+    void initHtmlHelpController();
+
     /**
      * Function loadCommonSettings
      * loads the program (process) settings subset which are stored in .kicad_common

include/project.h

@@ -131,15 +131,6 @@ public:
     /// Accessor for Eeschema search stack.
     VTBL_ENTRY SEARCH_STACK&  SchSearchS()      { return m_sch_search; }
 
-    /**
-     * Function PcbSearchS
-     * returns the obsolete footprint library search stack.
-     * Projects created before the FP_LIB_TABLE support will have footprint
-     * search paths in the *.pro files.  Projects created after the FP_LIB_TABLE
-     * support will not.  This stack is used for conversion from old to new only.
-     */
-    VTBL_ENTRY SEARCH_STACK&  PcbSearchS()      { return m_pcb_search; }
-
     VTBL_ENTRY  wxString GetModuleLibraryNickname()     { return m_module_library_nickname; }
     VTBL_ENTRY  void SetModuleLibraryNickname( const wxString& aNickName ) {  m_module_library_nickname = aNickName; }
 

include/ptree.h

@@ -78,7 +78,7 @@ typedef const PTREE                     CPTREE;
  *     PTREE   doc;
  *     Scan( &doc, &lexer );
  * }
- * catch( IO_ERROR ioe )
+ * catch( const IO_ERROR& ioe )
  * {
  *     fprintf( stderr, "%s\n", TO_UTF8( ioe.errorText ) );
  * }

include/search_stack.h

@@ -39,21 +39,6 @@ public:
             return wxPathList::FindValidPath( aFileName );
     }
 
-    /**
-     * Function FindValidPath
-     * KiCad saves user defined library files that are not in the standard
-     * library search path list with the full file path.  Calling the library
-     * search path list with a user library file will fail.  This helper method
-     * solves that problem.
-     * @param fileName
-     * @return a wxEmptyString if library file is not found.
-     */
-    wxString FindValidPath( const wxFileName& aFileName ) const
-    {
-        // call wxPathList::FindValidPath( const wxString& );
-        return wxPathList::FindValidPath( aFileName.GetFullPath() );
-    }
-
     /**
      * Function AddPaths
      * insert or append path(s)
@@ -72,15 +57,6 @@ public:
      * ";" on windows, or ":" | ";" on unix.
      */
     void RemovePaths( const wxString& aPaths );
-
-    /**
-     * Function FindFileInSearchPaths
-     * looks in "this" for \a aFilename, but first modifies every search
-     * path by appending a list of path fragments from aSubdirs.  That modification
-     * is not rentative.
-     */
-    wxString FindFileInSearchPaths( const wxString&      aFilename,
-                                    const wxArrayString* aSubdirs = NULL );
 };
 
 

include/wxstruct.h

@@ -186,6 +186,15 @@ protected:
      */
     virtual wxConfigBase* config();
 
+    /**
+     * Function sys_search
+     * returns a SEARCH_STACK pertaining to entire program, and is overloaded in
+     * KICAD_MANAGER_FRAME
+     */
+    virtual const SEARCH_STACK& sys_search();
+
+    virtual wxString help_name();
+
 public:
     EDA_BASE_FRAME( wxWindow* aParent, ID_DRAWFRAME_TYPE aFrameType,
         const wxString& aTitle, const wxPoint& aPos, const wxSize& aSize,

kicad/kicad.h

@@ -123,6 +123,11 @@ class KICAD_MANAGER_FRAME : public EDA_BASE_FRAME
 protected:
     wxConfigBase*       config();       // override EDA_BASE_FRAME virtual
 
+    const SEARCH_STACK& sys_search();   // override EDA_BASE_FRAME virtual
+
+    wxString help_name();               // override EDA_BASE_FRAME virtual
+
+
 public:
     TREE_PROJECT_FRAME* m_LeftWin;
     LAUNCHER_PANEL*     m_Launcher;

kicad/mainframe.cpp

@@ -123,6 +123,18 @@ wxConfigBase* KICAD_MANAGER_FRAME::config()
 }
 
 
+const SEARCH_STACK& KICAD_MANAGER_FRAME::sys_search()
+{
+    return Pgm().SysSearch();
+}
+
+
+wxString KICAD_MANAGER_FRAME::help_name()
+{
+    return Pgm().GetHelpFileName();
+}
+
+
 void KICAD_MANAGER_FRAME::PrintMsg( const wxString& aText )
 {
     m_MessagesBox->AppendText( aText );
@@ -157,15 +169,6 @@ void KICAD_MANAGER_FRAME::OnCloseWindow( wxCloseEvent& Event )
 
     Event.SetCanVeto( true );
 
-    // Close the help frame
-    if( Pgm().GetHtmlHelpController() )
-    {
-        if( Pgm().GetHtmlHelpController()->GetFrame() ) // returns NULL if no help frame active
-            Pgm().GetHtmlHelpController()->GetFrame()->Close( true );
-
-        Pgm().SetHtmlHelpController( NULL );
-    }
-
     m_LeftWin->Show( false );
 
     Destroy();

kicad/pgm_kicad.h

@@ -58,6 +58,8 @@ public:
 
     SEARCH_STACK&   SysSearch()                 { return m_bm.m_search; }
 
+    wxString        GetHelpFileName()           { return m_bm.m_help_file; }
+
 protected:
 
     // The PGM_* classes can have difficulties at termination if they

kicad/tree_project_frame.cpp

@@ -94,10 +94,10 @@ static const wxChar* s_allowedExtensionsToList[] =
  */
 
 /* File extension definitions. */
-const wxString  TextFileExtension( wxT( "txt" ) );
+const wxChar  TextFileExtension[] = wxT( "txt" );
 
 /* File wildcard definitions. */
-const wxString  TextFileWildcard( wxT( "Text files (*.txt)|*.txt" ) );
+const wxChar  TextFileWildcard[] = wxT( "Text files (*.txt)|*.txt" );
 
 
 /**
@@ -177,7 +177,6 @@ void TREE_PROJECT_FRAME::RemoveFilter( const wxString& filter )
 }
 
 
-
 /**
  * Called by the popup menu in the tree frame
  * Creates a new subdirectory inside the current kicad project directory

new/sch_dir_lib_source.cpp

@@ -716,7 +716,7 @@ void DIR_LIB_SOURCE::Test( int argc, char** argv )
         printf( "std::exception\n" );
     }
 
-    catch( IO_ERROR& ioe )
+    catch( const IO_ERROR& ioe )
     {
         printf( "exception: %s\n", (const char*) ioe.errorText.ToUTF8() ) );
     }

new/test_sch_lib_table.cpp

@@ -118,7 +118,7 @@ int main( int argc, char** argv )
 
         printf( "%*s^\n", ioe.byteIndex>=1 ? ioe.byteIndex-1 : 0, "" );
     }
-    catch( IO_ERROR& ioe )
+    catch( const IO_ERROR& ioe )
     {
         printf( "%s\n", (const char*) ioe.errorText.ToUTF8() );
     }

pagelayout_editor/page_layout_writer.cpp

@@ -98,7 +98,7 @@ public:
             m_fileout = new FILE_OUTPUTFORMATTER( aFilename );
             m_out = m_fileout;
         }
-        catch( IO_ERROR ioe )
+        catch( const IO_ERROR& ioe )
         {
             wxMessageBox( ioe.errorText, _("Error writing page layout descr file" ) );
         }
@@ -125,7 +125,7 @@ public:
             m_writer = new STRING_FORMATTER();
             m_out = m_writer;
         }
-        catch( IO_ERROR ioe )
+        catch( const IO_ERROR& ioe )
         {
             wxMessageBox( ioe.errorText, _("Error writing page layout descr file" ) );
         }

pcb_calculator/datafile_read_write.cpp

@@ -66,13 +66,16 @@ bool PCB_CALCULATOR_FRAME::ReadDataFile()
     {
         datafile_parser.Parse( datafile );
     }
-    catch( IO_ERROR& ioe )
+    catch( const IO_ERROR& ioe )
     {
         delete datafile;
-        ioe.errorText += '\n';
-        ioe.errorText += _("Data file error.");
 
-        wxMessageBox( ioe.errorText );
+        wxString msg = ioe.errorText;
+
+        msg += wxChar('\n');
+        msg += _("Data file error.");
+
+        wxMessageBox( msg );
         return false;
     }
 
@@ -99,7 +102,7 @@ bool PCB_CALCULATOR_FRAME::WriteDataFile()
         while( nestlevel-- )
             formatter.Print( nestlevel, ")\n" );
     }
-    catch( IO_ERROR ioe )
+    catch( const IO_ERROR& ioe )
     {
         return false;
     }

pcbnew/CMakeLists.txt

@@ -346,13 +346,10 @@ if( KICAD_SCRIPTING )
         COMMAND ${SWIG_EXECUTABLE} ${SWIG_OPTS} -o ${CMAKE_CURRENT_BINARY_DIR}/pcbnew_wrap.cxx  scripting/pcbnew.i
         COMMAND ${PYTHON_EXECUTABLE} ${CMAKE_SOURCE_DIR}/scripting/build_tools/fix_swig_imports.py ${CMAKE_CURRENT_BINARY_DIR}/pcbnew.py
         WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
-    )
+        )
 
 endif()
 
-###
-# _pcbnew DLL/DSO file creation
-###
 
 if( BUILD_GITHUB_PLUGIN )
     set( GITHUB_PLUGIN_LIBRARIES github_plugin )
@@ -401,9 +398,14 @@ if( KICAD_SCRIPTING_MODULES )
 
     if( MAKE_LINK_MAPS )
         set_target_properties( _pcbnew PROPERTIES
-            LINK_FLAGS "${TO_LINKER},-cref ${TO_LINKER},-Map=pcbnew.so.map" )
+            LINK_FLAGS "${TO_LINKER},-cref ${TO_LINKER},-Map=pcbnew.so.map"
+            )
     endif()
 
+    if( ${OPENMP_FOUND} )
+        set_property( TARGET _pcbnew APPEND_STRING
+            PROPERTY LINK_FLAGS " ${OpenMP_CXX_FLAGS}" )
+        endif()
 endif()
 
 
@@ -422,14 +424,13 @@ if( DOXYGEN_FOUND )
             WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}
             DEPENDS Doxyfile_xml
             COMMENT "building doxygen docs into directory doxygen-python/html"
-        )
+            )
 
         # create .i files from XML doxygen parsing, docstrings.i will include all of them
         add_custom_target( xml-to-docstrings
             COMMAND ${CMAKE_COMMAND} -E remove_directory docstrings
             COMMAND ${CMAKE_COMMAND} -E make_directory docstrings
             COMMAND ${PYTHON_EXECUTABLE} ${CMAKE_SOURCE_DIR}/scripting/build_tools/extract_docstrings.py pcbnew.py doxygen-xml/xml docstrings
-
             COMMAND ${CMAKE_COMMAND} -E remove pcbnew.py # force removal so it will be recreated later with the new docstrings
             COMMENT "building docstring files"
             WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}
@@ -445,16 +446,14 @@ if( DOXYGEN_FOUND )
             DEPENDS Doxyfile_python
             DEPENDS xml-to-docstrings
             DEPENDS pcbnew.py
-
             COMMENT "building doxygen docs into directory doxygen-python/html"
-        )
+            )
     endif()
 else()
     message( STATUS "WARNING: Doxygen not found - doxygen-docs (Source Docs) target not created" )
 endif()
 
 
-
 if( MINGW )
     # PCBNEW_RESOURCES variable is set by the macro.
     mingw_resource_compiler( pcbnew )
@@ -485,9 +484,8 @@ add_custom_command(
        from ${CMAKE_CURRENT_SOURCE_DIR}/dialogs/dialog_freeroute_exchange_help.html"
     )
 
-set_source_files_properties( dialogs/dialog_freeroute_exchange.cpp
-    PROPERTIES
-        OBJECT_DEPENDS ${CMAKE_CURRENT_SOURCE_DIR}/dialogs/dialog_freeroute_exchange_help_html.h
+set_source_files_properties( dialogs/dialog_freeroute_exchange.cpp PROPERTIES
+    OBJECT_DEPENDS ${CMAKE_CURRENT_SOURCE_DIR}/dialogs/dialog_freeroute_exchange_help_html.h
     )
 
 
@@ -511,14 +509,14 @@ endif()
 
 
 if( USE_KIWAY_DLLS )
+#if( false )
 
     # a very small program launcher for pcbnew_kiface
     add_executable( pcbnew WIN32 MACOSX_BUNDLE
         ../common/single_top.cpp
-        ../common/pgm_base.cpp
         ${PCBNEW_RESOURCES}
         )
-    set_source_files_properties( ../common/single_top.cpp PROPERTIES
+    set_source_files_properties( ../common/single_top.cpp pcbnew.cpp PROPERTIES
         COMPILE_DEFINITIONS "TOP_FRAME=PCB_FRAME_TYPE;PGM_DATA_FILE_EXT=\"kicad_pcb\";BUILD_KIWAY_DLL"
         )
     target_link_libraries( pcbnew
@@ -539,9 +537,7 @@ if( USE_KIWAY_DLLS )
         ${PCBNEW_SRCS}
         ${PCBNEW_COMMON_SRCS}
         ${PCBNEW_SCRIPTING_SRCS}
-#        ${PCBNEW_RESOURCES}
         )
-
     set_target_properties( pcbnew_kiface PROPERTIES
         # Decorate OUTPUT_NAME with PREFIX and SUFFIX, creating something like
         # _pcbnew.so, _pcbnew.dll, or _pcbnew.kiface
@@ -552,7 +548,7 @@ if( USE_KIWAY_DLLS )
     if( ${OPENMP_FOUND} )
         set_target_properties( pcbnew_kiface PROPERTIES
             COMPILE_FLAGS   ${OpenMP_CXX_FLAGS}
-        )
+            )
     endif()
 
     target_link_libraries( pcbnew_kiface
@@ -583,7 +579,11 @@ if( USE_KIWAY_DLLS )
         )
     if( MAKE_LINK_MAPS )
         set_target_properties( pcbnew_kiface PROPERTIES
-            LINK_FLAGS "${TO_LINKER},-cref ${TO_LINKER},-Map=_pcbnew.kiface.map" )
+            LINK_FLAGS "${TO_LINKER},-cref ${TO_LINKER},-Map=_pcbnew.kiface.map"
+            )
+        set_target_properties( pcbnew PROPERTIES
+            LINK_FLAGS "${TO_LINKER},-cref ${TO_LINKER},-Map=pcbnew.map"
+            )
     endif()
 
     # if building pcbnew, then also build pcbnew_kiface if out of date.
@@ -605,18 +605,22 @@ if( USE_KIWAY_DLLS )
             COMMAND ${CMAKE_COMMAND} -E copy ${CMAKE_BINARY_DIR}/pcbnew/_pcbnew.kiface "${CMAKE_BINARY_DIR}/pcbnew/pcbnew.app/Contents/MacOS/"
             DEPENDS pcbnew_kiface
             COMMENT "Copying kiface into pcbnew"
-        )
+            )
     endif()
 
 else()  # milestone A) kills this off:
 
     add_executable( pcbnew WIN32 MACOSX_BUNDLE
+        ../common/single_top.cpp
         pcbnew.cpp
         ${PCBNEW_SRCS}
         ${PCBNEW_COMMON_SRCS}
         ${PCBNEW_SCRIPTING_SRCS}
         ${PCBNEW_RESOURCES}
         )
+    set_source_files_properties( ../common/single_top.cpp PROPERTIES
+        COMPILE_DEFINITIONS "TOP_FRAME=PCB_FRAME_TYPE;PGM_DATA_FILE_EXT=\"kicad_pcb\""
+        )
     target_link_libraries( pcbnew
         3d-viewer
         pcbcommon
@@ -651,28 +655,25 @@ else()  # milestone A) kills this off:
             )
     endif()
 
+    if( MAKE_LINK_MAPS )
+        # generate a link map with cross reference
+        set_target_properties( pcbnew PROPERTIES
+            LINK_FLAGS "${TO_LINKER},-cref ${TO_LINKER},-Map=pcbnew.map"
+            )
+    endif()
+
     install( TARGETS pcbnew
         DESTINATION ${KICAD_BIN}
         COMPONENT binary
         )
-
 endif()
 
 
 add_dependencies( pcbnew lib-dependencies )
-###
-# Set properties for APPLE on pcbnew target
-###
 if( APPLE )
     set_target_properties( pcbnew PROPERTIES
-        MACOSX_BUNDLE_INFO_PLIST ${CMAKE_CURRENT_SOURCE_DIR}/Info.plist )
-endif()
-
-
-if( MAKE_LINK_MAPS )
-    # generate a link map with cross reference
-    set_target_properties( pcbnew PROPERTIES
-        LINK_FLAGS "${TO_LINKER},-cref ${TO_LINKER},-Map=pcbnew.map" )
+        MACOSX_BUNDLE_INFO_PLIST ${CMAKE_CURRENT_SOURCE_DIR}/Info.plist
+        )
 endif()
 
 
@@ -691,19 +692,19 @@ if( KICAD_SCRIPTING )
             COMMAND ${CMAKE_COMMAND} -E copy ${CMAKE_BINARY_DIR}/pcbnew/pcbnew.py "${PYTHON_DEST}/wx-3.0-osx_cocoa/"
             DEPENDS FixSwigImportsScripting
             COMMENT "Copying pcbnew.py into PYTHON_DEST/wx-3.0-osx_cocoa/"
-        )
+            )
 
         add_custom_target( pcbnew_copy_wxpython_scripting ALL
             COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBWXPYTHON_ROOT}/wxPython/  ${CMAKE_SOURCE_DIR}/pcbnew/pcbnew.app/Contents/Frameworks/wxPython/
             DEPENDS FixSwigImportsScripting _pcbnew_py_copy
             COMMENT "Copying wxPython into pcbnew.app Framework"
-        )
+            )
 
         add_custom_target( pcbnew_copy_plugins ALL
             COMMAND ${CMAKE_COMMAND} -E copy_directory ${PROJECT_SOURCE_DIR}/pcbnew/scripting/plugins ${PROJECT_SOURCE_DIR}/pcbnew/pcbnew.app/Contents/PlugIns/scripting/plugins
             DEPENDS pcbnew_copy_wxpython_scripting
             COMMENT "Copying plugins into bundle"
-        )
+            )
 
         # fix bundle after copying wxpython, fixing and copying
         add_dependencies( osx_fix_bundles pcbnew_copy_wxpython_scripting )
@@ -738,13 +739,13 @@ if( KICAD_SCRIPTING_MODULES )
             COMMAND ${CMAKE_COMMAND} -E copy ${CMAKE_BINARY_DIR}/pcbnew/_pcbnew.so "${PYTHON_DEST}"
             DEPENDS _pcbnew FixSwigImportsModuleScripting
             COMMENT "Copying _pcbnew.so into PYTHON_DEST"
-        )
+            )
 
         add_custom_target( pcbnew_copy_wxpython_module ALL
             COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBWXPYTHON_ROOT}/wxPython/  ${PROJECT_SOURCE_DIR}/pcbnew/pcbnew.app/Contents/Frameworks/wxPython/
             DEPENDS FixSwigImportsModuleScripting _pcbnew_so_copy
             COMMENT "Copying wxPython into pcbnew.app Frameworks"
-        )
+            )
 
         if( KICAD_BUILD_DYNAMIC )
             # Tell that we have to run osx_fix_bundles fix after building _pcbnew and migrating wxPython
@@ -755,14 +756,15 @@ if( KICAD_SCRIPTING_MODULES )
 endif()
 
 
-# This one gets made only when testing.
-add_executable( specctra_test EXCLUDE_FROM_ALL specctra_test.cpp specctra.cpp )
-target_link_libraries( specctra_test common ${wxWidgets_LIBRARIES} )
-
+if( false )     # haven't been used in years.
+    # This one gets made only when testing.
+    add_executable( specctra_test EXCLUDE_FROM_ALL specctra_test.cpp specctra.cpp )
+    target_link_libraries( specctra_test common ${wxWidgets_LIBRARIES} )
 
-# This one gets made only when testing.
-add_executable( layer_widget_test WIN32 EXCLUDE_FROM_ALL
-    layer_widget.cpp
-    )
-target_link_libraries( layer_widget_test common ${wxWidgets_LIBRARIES} )
 
+    # This one gets made only when testing.
+    add_executable( layer_widget_test WIN32 EXCLUDE_FROM_ALL
+        layer_widget.cpp
+        )
+    target_link_libraries( layer_widget_test common ${wxWidgets_LIBRARIES} )
+endif()

pcbnew/class_netclass.cpp

@@ -36,7 +36,7 @@
 
 
 // This will get mapped to "kicad_default" in the specctra_export.
-const wxString NETCLASS::Default = wxT("Default");
+const wxChar NETCLASS::Default[] = wxT( "Default" );
 
 // Initial values for netclass initialization
 int NETCLASS::DEFAULT_CLEARANCE  = DMils2iu( 100 );  // track to track and track to pads clearance

pcbnew/class_netclass.h

@@ -80,7 +80,7 @@ protected:
 
 public:
 
-    static const wxString Default;      ///< the name of the default NETCLASS
+    static const wxChar Default[];      ///< the name of the default NETCLASS
 
     /**
      * Constructor

pcbnew/clean.cpp

@@ -41,37 +41,20 @@
 #include <ratsnest_data.h>
 
 // Helper class used to clean tracks and vias
-class TRACKS_CLEANER : CONNECTIONS
+class TRACKS_CLEANER: CONNECTIONS
 {
 private:
-    BOARD* m_Brd;
-    bool m_deleteUnconnectedTracks;
-    bool m_mergeSegments;
-    bool m_cleanVias;
+    BOARD * m_Brd;
 
 public:
-    TRACKS_CLEANER( BOARD* aPcb );
+    TRACKS_CLEANER( BOARD * aPcb );
 
     /**
      * the cleanup function.
      * return true if some item was modified
      */
-    bool CleanupBoard();
-
-    void SetdeleteUnconnectedTracksOpt( bool aDelete )
-    {
-        m_deleteUnconnectedTracks = aDelete;
-    }
-
-    void SetMergeSegmentsOpt( bool aMerge )
-    {
-        m_mergeSegments = aMerge;
-    }
-
-    void SetCleanViasOpt( bool aClean )
-    {
-        m_cleanVias = aClean;
-    }
+    bool CleanupBoard(PCB_EDIT_FRAME *aFrame, bool aCleanVias,
+                      bool aMergeSegments, bool aDeleteUnconnected);
 
 private:
 
@@ -89,7 +72,7 @@ private:
     /**
      * Merge colinear segments and remove null len segments
      */
-    bool  clean_segments();
+    bool clean_segments();
 
     /**
      * helper function
@@ -103,7 +86,8 @@ private:
      * merge aTrackRef and aCandidate, when possible,
      * i.e. when they are colinear, same width, and obviously same layer
      */
-    TRACK* mergeCollinearSegmentIfPossible( TRACK* aTrackRef, TRACK* aCandidate, int aEndType );
+    TRACK* mergeCollinearSegmentIfPossible( TRACK* aTrackRef,
+                                           TRACK* aCandidate, int aEndType );
 };
 
 /* Install the cleanup dialog frame to know what should be cleaned
@@ -117,19 +101,9 @@ void PCB_EDIT_FRAME::Clean_Pcb()
 
     wxBusyCursor( dummy );
     TRACKS_CLEANER cleaner( GetBoard() );
-    cleaner.SetdeleteUnconnectedTracksOpt( dlg.m_deleteUnconnectedSegm );
-    cleaner.SetMergeSegmentsOpt( dlg.m_mergeSegments );
-    cleaner.SetCleanViasOpt( dlg.m_cleanVias );
-
-    if( cleaner.CleanupBoard() )
-    {
-        // Clear undo and redo lists to avoid inconsistencies between lists
-        GetScreen()->ClearUndoRedoList();
-        SetCurItem( NULL );
-        Compile_Ratsnest( NULL, true );
-        OnModify();
-    }
 
+    cleaner.CleanupBoard( this, dlg.m_cleanVias, dlg.m_mergeSegments, 
+                          dlg.m_deleteUnconnectedSegm );
     m_canvas->Refresh( true );
 }
 
@@ -142,30 +116,38 @@ void PCB_EDIT_FRAME::Clean_Pcb()
  *  Create segments when track ends are incorrectly connected:
  *  i.e. when a track end covers a pad or a via but is not exactly on the pad or the via center
  */
-bool TRACKS_CLEANER::CleanupBoard()
+bool TRACKS_CLEANER::CleanupBoard( PCB_EDIT_FRAME *aFrame,
+                                   bool aCleanVias,
+                                   bool aMergeSegments,
+                                   bool aDeleteUnconnected )
 {
     bool modified = false;
 
     // delete redundant vias
-    if( m_cleanVias && clean_vias() )
-        modified = true;
+    modified |= (aCleanVias && clean_vias());
 
     // Remove null segments and intermediate points on aligned segments
-    if( m_mergeSegments && clean_segments() )
-        modified = true;
+    modified |= (aMergeSegments && clean_segments());
 
     // Delete dangling tracks
-    if( m_deleteUnconnectedTracks && deleteUnconnectedTracks() )
-        modified = true;
+    modified |= (aDeleteUnconnected && deleteUnconnectedTracks());
 
+    if( modified )
+    {
+        // Clear undo and redo lists to avoid inconsistencies between lists
+        // XXX This is very involved... maybe a member in PCB_EDIT_FRAME
+        // would be better?
+        aFrame->GetScreen()->ClearUndoRedoList();
+        aFrame->SetCurItem( NULL );
+        aFrame->Compile_Ratsnest( NULL, true );
+        aFrame->OnModify();
+    }
     return modified;
 }
 
-TRACKS_CLEANER::TRACKS_CLEANER( BOARD* aPcb ) : CONNECTIONS( aPcb )
+TRACKS_CLEANER::TRACKS_CLEANER( BOARD * aPcb ): CONNECTIONS( aPcb )
 {
     m_Brd = aPcb;
-    m_deleteUnconnectedTracks = false;
-    m_mergeSegments = false;
 
     // Build connections info
     BuildPadsList();
@@ -177,22 +159,22 @@ void TRACKS_CLEANER::buildTrackConnectionInfo()
     BuildTracksCandidatesList( m_Brd->m_Track, NULL);
 
     // clear flags and variables used in cleanup
-    for( TRACK* track = m_Brd->m_Track; track; track = track->Next() )
+    for( TRACK * track = m_Brd->m_Track; track; track = track->Next() )
     {
         track->start = NULL;
         track->end = NULL;
         track->m_PadsConnected.clear();
-        track->SetState( START_ON_PAD | END_ON_PAD | BUSY, false );
+        track->SetState( START_ON_PAD|END_ON_PAD|BUSY, false );
     }
 
     // Build connections info tracks to pads
     SearchTracksConnectedToPads();
-    for( TRACK* track = m_Brd->m_Track; track; track = track->Next() )
+    for( TRACK * track = m_Brd->m_Track; track; track = track->Next() )
     {
         // Mark track if connected to pads
         for( unsigned jj = 0; jj < track->m_PadsConnected.size(); jj++ )
         {
-            D_PAD* pad = track->m_PadsConnected[jj];
+            D_PAD * pad = track->m_PadsConnected[jj];
 
             if( pad->HitTest( track->GetStart() ) )
             {
@@ -211,7 +193,6 @@ void TRACKS_CLEANER::buildTrackConnectionInfo()
 
 bool TRACKS_CLEANER::clean_vias()
 {
-    TRACK* next_track;
     bool modified = false;
 
     for( TRACK* track = m_Brd->m_Track; track; track = track->Next() )
@@ -229,6 +210,7 @@ bool TRACKS_CLEANER::clean_vias()
         // Search and delete others vias at same location
         TRACK* alt_track = track->Next();
 
+        TRACK* next_track;
         for( ; alt_track != NULL; alt_track = next_track )
         {
             next_track = alt_track->Next();
@@ -249,6 +231,7 @@ bool TRACKS_CLEANER::clean_vias()
     }
 
     // Delete Via on pads at same location
+    TRACK* next_track;
     for( TRACK* track = m_Brd->m_Track; track != NULL; track = next_track )
     {
         next_track = track->Next();
@@ -260,9 +243,9 @@ bool TRACKS_CLEANER::clean_vias()
         // if one pad through is found, the via can be removed
         for( unsigned ii = 0; ii < track->m_PadsConnected.size(); ii++ )
         {
-            D_PAD* pad = track->m_PadsConnected[ii];
+            D_PAD * pad = track->m_PadsConnected[ii];
 
-            if( ( pad->GetLayerMask() & ALL_CU_LAYERS ) == ALL_CU_LAYERS )
+            if( (pad->GetLayerMask() & ALL_CU_LAYERS) == ALL_CU_LAYERS )
             {
                 // redundant: via delete it
                 m_Brd->GetRatsnest()->Remove( track );
@@ -295,8 +278,7 @@ bool TRACKS_CLEANER::deleteUnconnectedTracks()
     {
         item_erased = false;
         TRACK* next_track;
-
-        for( TRACK* track = m_Brd->m_Track; track ; track = next_track )
+        for( TRACK * track = m_Brd->m_Track; track ; track = next_track )
         {
             next_track = track->Next();
 
@@ -317,7 +299,7 @@ bool TRACKS_CLEANER::deleteUnconnectedTracks()
             LAYER_NUM top_layer, bottom_layer;
             ZONE_CONTAINER* zone;
 
-            if( ( type_end & START_ON_PAD ) == 0 )
+            if( (type_end & START_ON_PAD ) == 0 )
             {
                 TRACK* other = track->GetTrace( m_Brd->m_Track, NULL, FLG_START );
 
@@ -339,7 +321,7 @@ bool TRACKS_CLEANER::deleteUnconnectedTracks()
                     }
                 }
 
-                if( ( other == NULL ) && ( zone == NULL ) )
+                if( (other == NULL) && (zone == NULL) )
                 {
                     flag_erase |= 1;
                 }
@@ -427,7 +409,7 @@ bool TRACKS_CLEANER::deleteUnconnectedTracks()
                                                                    via->GetNetCode() );
                         }
 
-                        if( ( other == NULL ) && ( zone == NULL ) )
+                        if( (other == NULL) && (zone == NULL) )
                             flag_erase |= 0x20;
 
                         track->SetState( BUSY, false );
@@ -459,8 +441,6 @@ bool TRACKS_CLEANER::clean_segments()
     bool modified = false;
     TRACK*          segment, * nextsegment;
     TRACK*          other;
-    int             flag, no_inc;
-
 
     // Delete null segments
     for( segment = m_Brd->m_Track; segment; segment = nextsegment )
@@ -472,6 +452,7 @@ bool TRACKS_CLEANER::clean_segments()
             m_Brd->GetRatsnest()->Remove( segment );
             segment->ViewRelease();
             segment->DeleteStructure();
+            modified = true;
         }
     }
 
@@ -524,7 +505,8 @@ bool TRACKS_CLEANER::clean_segments()
         if( segment->Type() != PCB_TRACE_T )
             continue;
 
-        flag = no_inc = 0;
+        unsigned flag = 0;
+        bool no_inc = false;
 
         // search for a possible point connected to the START point of the current segment
         for( segStart = segment->Next(); ; )
@@ -603,7 +585,7 @@ bool TRACKS_CLEANER::clean_segments()
 
             if( segDelete )
             {
-                no_inc = 1;
+                no_inc = true;
                 m_Brd->GetRatsnest()->Remove( segDelete );
                 segDelete->ViewRelease();
                 segDelete->DeleteStructure();

pcbnew/dialogs/dialog_netlist.cpp

@@ -91,7 +91,7 @@ void PCB_EDIT_FRAME::InstallNetlistFrame( wxDC* DC )
 
         // was: wxGetApp().WriteProjectConfig( fn.GetFullPath(), GROUP, GetProjectFileParameters() );
         Prj().ConfigSave( Kiface().KifaceSearch(), fn.GetFullPath(),
-                GROUP, GetProjectFileParameters() );
+                GROUP_PCB, GetProjectFileParameters() );
     }
 }
 
@@ -426,7 +426,7 @@ bool DIALOG_NETLIST::verifyFootprints( const wxString&         aNetlistFilename,
         std::auto_ptr< NETLIST_READER > nlr( netlistReader );
         netlistReader->LoadNetlist();
     }
-    catch( IO_ERROR& ioe )
+    catch( const IO_ERROR& ioe )
     {
         msg.Printf( _( "Error loading netlist file:\n%s" ), ioe.errorText.GetData() );
         wxMessageBox( msg, _( "Netlist Load Error" ), wxOK | wxICON_ERROR );

pcbnew/exporters/export_idf.cpp

@@ -403,7 +403,7 @@ bool Export_IDF3( BOARD* aPcb, const wxString& aFullFileName, double aUseThou )
 
         idfBoard.Finish();
     }
-    catch( IO_ERROR ioe )
+    catch( const IO_ERROR& ioe )
     {
         wxLogDebug( wxT( "An error occurred attemping export to IDFv3.\n\nError: %s" ),
                     GetChars( ioe.errorText ) );

pcbnew/exporters/gen_modules_placefile.cpp

@@ -713,7 +713,7 @@ bool PCB_EDIT_FRAME::DoGenFootprintsReport( const wxString& aFullFilename, bool
             fprintf( rptfile, "$EndMODULE  %s\n\n", TO_UTF8 (Module->GetReference() ) );
         }
     }
-    catch( IO_ERROR ioe )
+    catch( const IO_ERROR& ioe )
     {
         DisplayError( NULL, ioe.errorText );
     }

pcbnew/files.cpp

@@ -404,7 +404,7 @@ bool PCB_EDIT_FRAME::OpenProjectFiles( const std::vector<wxString>& aFileSet, in
             SetBoard( loadedBoard );
         }
     }
-    catch( IO_ERROR ioe )
+    catch( const IO_ERROR& ioe )
     {
         wxString msg = wxString::Format( _( "Error loading board.\n%s" ),
                                          ioe.errorText.GetData() );
@@ -692,7 +692,7 @@ bool PCB_EDIT_FRAME::SavePcbFile( const wxString& aFileName, bool aCreateBackupF
 
         pi->Save( pcbFileName.GetFullPath(), GetBoard(), NULL );
     }
-    catch( IO_ERROR ioe )
+    catch( const IO_ERROR& ioe )
     {
         wxString msg = wxString::Format( _( "Error saving board.\n%s" ),
                                          ioe.errorText.GetData() );

pcbnew/github/github_plugin.cpp

@@ -570,7 +570,7 @@ int main( int argc, char** argv )
             printf("[%d]:%s\n", i, TO_UTF8( fps[i] ) );
         }
     }
-    catch( IO_ERROR ioe )
+    catch( const IO_ERROR& ioe )
     {
         printf( "%s\n", TO_UTF8(ioe.errorText) );
     }

pcbnew/io_mgr.h

@@ -204,7 +204,7 @@ public:
  *   or
  *        IO_MGR::Save(...);
  *   }
- *   catch( IO_ERROR ioe )
+ *   catch( const IO_ERROR& ioe )
  *   {
  *        // grab text from ioe, show in error window.
  *   }

pcbnew/ioascii.cpp.notused

- /**
- * @file ioascii.cpp
- * @brief Routines for reading and saving of structures in ASCII file common to Pcbnew and CvPcb.
- */
-
-#include <fctsys.h>
-#include <confirm.h>
-#include <kicad_string.h>
-#include <build_version.h>
-#include <wxPcbStruct.h>
-#include <richio.h>
-#include <macros.h>
-#include <pcbcommon.h>
-
-/**
- * @todo Fix having to recompile the same file with a different defintion.  This is
- *       what C++ derivation was designed to solve.
- */
-#ifdef PCBNEW
-#include <zones.h>
-#endif
-
-#ifdef CVPCB
-#include <cvpcb.h>
-#endif
-
-#include <class_board.h>
-#include <class_module.h>
-#include <class_track.h>
-#include <class_pcb_text.h>
-#include <class_zone.h>
-#include <class_dimension.h>
-#include <class_drawsegment.h>
-#include <class_mire.h>
-
-#include <pcbnew.h>
-#include <pcbnew_id.h>
-#include <autorout.h>
-#include <pcb_plot_params.h>
-
-
-/* ASCII format of structures:
- *
- * Structure PAD:
- *
- * $PAD
- * Sh "name" form DIMVA dimH dV dH East: general form dV, dH = delta size
- * Dr. diam dV dH: drill: diameter drilling offsets
- * At Type S / N layers: standard, cms, conn, hole, meca.,
- *    Stack / Normal, 32-bit hexadecimal: occupation layers
- * Nm net_code netname
- * Po posrefX posrefy: reFX position, Y (0 = east position / anchor)
- * $EndPAD
- *
- * Module Structure
- *
- * $MODULE namelib
- * Po ax ay east layer masquelayer m_TimeCode
- *    ax ay ord = anchor (position module)
- *    east = east to 0.1 degree
- *    layer = layer number
- *    masquelayer = silkscreen layer for
- *    m_TimeCode internal use (groups)
- * Li <namelib>
- *
- * Cd <text> description of the component (Component Doc)
- * Kw <text> List of key words
- *
- * Sc schematic timestamp, reference schematic
- *
- * Op rot90 rot180 placement Options Auto (court rot 90, 180)
- *    rot90 is about 2x4-bit:
- *    lsb = cost rot 90, rot court msb = -90;
- *
- * Tn px py DIMVA dimh East thickness mirror visible "text"
- *    n = type (0 = ref, val = 1,> 1 = qcq
- *    Texts POS x, y / anchor and orient module 0
- *    DIMVA dimh East
- *    mirror thickness (Normal / Mirror)
- *    Visible V / I
- * DS ox oy fx fy w
- *    Edge: coord segment ox, oy has fx, fy, on
- *    was the anchor and orient 0
- *    thickness w
- * DC ox oy fx fy w descr circle (center, 1 point, thickness)
- * $PAD
- * $EndPAD section pads if available
- * $Endmodule
- */
-
-/// Get the length of a string constant, at compile time
-#define SZ( x )         (sizeof(x)-1)
-
-static int NbDraw, NbTrack, NbZone, NbMod, NbNets;
-
-static const char delims[] = " =\n\r";
-
-
-/** Read a list of segments (Tracks, zones)
- * @return items count or - count if no end block ($End...) found.
- */
-int PCB_BASE_FRAME::ReadListeSegmentDescr( LINE_READER* aReader,
-                                           TRACK* insertBeforeMe,
-                                           int    StructType,
-                                           int    NumSegm )
-{
-    int    shape, width, drill, layer, type, flags, net_code;
-    int    tempStartX, tempStartY;
-    int    tempEndX, tempEndY;
-    int    ii = 0;
-
-    TRACK* newTrack;
-
-    while( aReader->ReadLine() )
-    {
-        char*           line = aReader->Line();
-        int             makeType;
-        unsigned long   timeStamp;
-
-        if( line[0] == '$' )
-        {
-            return ii;      // end of segmentlist: OK
-        }
-
-        int arg_count = sscanf( line + 2, " %d %d %d %d %d %d %d", &shape,
-                                &tempStartX, &tempStartY,
-                                &tempEndX, &tempEndY, &width,
-                                &drill );
-
-        // Read the 2nd line to determine the exact type, one of:
-        // PCB_TRACE_T, PCB_VIA_T, or PCB_ZONE_T.  The type field in 2nd line
-        // differentiates between PCB_TRACE_T and PCB_VIA_T.  With virtual
-        // functions in use, it is critical to instantiate the PCB_VIA_T
-        // exactly.
-        if( !aReader->ReadLine() )
-            break;
-
-        line = aReader->Line();
-
-        if( line[0] == '$' )
-            break;
-
-        // parse the 2nd line first to determine the type of object
-        sscanf( line + 2, " %d %d %d %lX %X", &layer, &type, &net_code,
-                &timeStamp, &flags );
-
-        if( StructType==PCB_TRACE_T && type==1 )
-            makeType = PCB_VIA_T;
-        else
-            makeType = StructType;
-
-        switch( makeType )
-        {
-        default:
-        case PCB_TRACE_T:
-            newTrack = new TRACK( GetBoard() );
-            GetBoard()->m_Track.Insert( newTrack, insertBeforeMe );
-            break;
-
-        case PCB_VIA_T:
-            newTrack = new SEGVIA( GetBoard() );
-            GetBoard()->m_Track.Insert( newTrack, insertBeforeMe );
-            break;
-
-        case PCB_ZONE_T:     // this is now deprecated, but exist in old boards
-            newTrack = new SEGZONE( GetBoard() );
-            GetBoard()->m_Zone.Insert( (SEGZONE*) newTrack, (SEGZONE*) insertBeforeMe );
-            break;
-        }
-
-        newTrack->SetTimeStamp( timeStamp );
-
-        newTrack->m_Start.x = tempStartX;
-        newTrack->m_Start.y = tempStartY;
-        newTrack->m_End.x = tempEndX;
-        newTrack->m_End.y = tempEndY;
-
-        newTrack->m_Width = width;
-        newTrack->m_Shape = shape;
-
-        if( arg_count < 7 || drill <= 0 )
-            newTrack->SetDrillDefault();
-        else
-            newTrack->SetDrill( drill );
-
-        newTrack->SetLayer( layer );
-
-        if( makeType == PCB_VIA_T ) // Ensure layers are OK when possible:
-        {
-            if( newTrack->GetShape() == VIA_THROUGH )
-                ( (SEGVIA*) newTrack )->SetLayerPair( LAYER_N_FRONT, LAYER_N_BACK );
-        }
-
-        newTrack->SetNet( net_code );
-        newTrack->SetState( flags, ON );
-    }
-
-    DisplayError( this, _( "Error: Unexpected end of file !" ) );
-    return -ii;
-}
-
-
-int PCB_BASE_FRAME::ReadGeneralDescrPcb( LINE_READER* aReader )
-{
-    while( aReader->ReadLine() )
-    {
-        char* line = aReader->Line();
-        char* data = strtok( line, delims );
-
-        if( strnicmp( data, "$EndGENERAL", 10 ) == 0 )
-            break;
-
-        if( stricmp( data, "EnabledLayers" ) == 0 )
-        {
-            int enabledLayers = 0;
-
-            data = strtok( NULL, delims );
-            sscanf( data, "%X", &enabledLayers );
-
-            // layer usage
-            GetBoard()->SetEnabledLayers( enabledLayers );
-
-            // layer visibility equals layer usage, unless overridden later via "VisibleLayers"
-            GetBoard()->SetVisibleLayers( enabledLayers );
-            continue;
-        }
-
-        if( stricmp( data, "VisibleLayers" ) == 0 )
-        {
-            int visibleLayers = -1;
-
-            data = strtok( NULL, delims );
-            sscanf( data, "%X", &visibleLayers );
-
-            GetBoard()->SetVisibleLayers( visibleLayers );
-            continue;
-        }
-
-        if( strncmp( data, "Ly", 2 ) == 0 )    // Old format for Layer count
-        {
-            int Masque_Layer = 1, ii;
-
-            data = strtok( NULL, delims );
-            sscanf( data, "%X", &Masque_Layer );
-
-            // Setup layer count
-            int layer_count = 0;
-
-            for( ii = 0; ii < NB_COPPER_LAYERS; ii++ )
-            {
-                if( Masque_Layer & 1 )
-                    layer_count++;
-
-                Masque_Layer >>= 1;
-            }
-
-            GetBoard()->SetCopperLayerCount( layer_count );
-
-            continue;
-        }
-
-        if( stricmp( data, "BoardThickness" ) == 0 )
-        {
-            data = strtok( NULL, delims );
-            GetBoard()->GetDesignSettings().m_BoardThickness = atoi( data );
-            continue;
-        }
-
-        if( strnicmp( data, "Links", 5 ) == 0 )
-        {
-            // Info only, do nothing
-            continue;
-        }
-
-        if( strnicmp( data, "NoConn", 6 ) == 0 )
-        {
-            data = strtok( NULL, delims );
-            GetBoard()->m_NbNoconnect = atoi( data );
-            continue;
-        }
-
-        if( strnicmp( data, "Di", 2 ) == 0 )
-        {
-            data = strtok( NULL, delims );
-            int x1 = atoi( data );
-
-            data = strtok( NULL, delims );
-            int y1 = atoi( data );
-
-            data = strtok( NULL, delims );
-            int x2 = atoi( data );
-
-            data = strtok( NULL, delims );
-            int y2 = atoi( data );
-
-            EDA_RECT bbbox( wxPoint( x1, y1 ), wxSize( x2-x1, y2-y1 ) );
-
-            GetBoard()->SetBoundingBox( bbbox );
-
-            continue;
-        }
-
-        // Read the number of segments of type DRAW, TRACK, ZONE
-        if( stricmp( data, "Ndraw" ) == 0 )
-        {
-            data   = strtok( NULL, delims );
-            NbDraw = atoi( data );
-            continue;
-        }
-
-        if( stricmp( data, "Ntrack" ) == 0 )
-        {
-            data    = strtok( NULL, delims );
-            NbTrack = atoi( data );
-            continue;
-        }
-
-        if( stricmp( data, "Nzone" ) == 0 )
-        {
-            data   = strtok( NULL, delims );
-            NbZone = atoi( data );
-            continue;
-        }
-
-        if( stricmp( data, "Nmodule" ) == 0 )
-        {
-            data  = strtok( NULL, delims );
-            NbMod = atoi( data );
-            continue;
-        }
-
-        if( stricmp( data, "Nnets" ) == 0 )
-        {
-            data   = strtok( NULL, delims );
-            NbNets = atoi( data );
-            continue;
-        }
-    }
-
-    return 1;
-}
-
-
-int PCB_BASE_FRAME::ReadSetup( LINE_READER* aReader )
-{
-    char*     data;
-
-    NETCLASS* netclass_default = GetBoard()->m_NetClasses.GetDefault();
-    ZONE_SETTINGS zoneInfo = GetBoard()->GetZoneSettings();
-    BOARD_DESIGN_SETTINGS bds = GetBoard()->GetDesignSettings();
-
-    while( aReader->ReadLine() )
-    {
-        char* line = aReader->Line();
-
-        if( strnicmp( line, "PcbPlotParams", 13 ) == 0 )
-        {
-            PCB_PLOT_PARAMS plot_opts;
-            PCB_PLOT_PARAMS_PARSER parser( &line[13], aReader->GetSource() );
-
-            try
-            {
-                plot_opts.Parse( &parser );
-            }
-            catch( IO_ERROR& e )
-            {
-                wxString msg;
-                msg.Printf( _( "Error reading PcbPlotParams from %s:\n%s" ),
-                            aReader->GetSource().GetData(),
-                            e.errorText.GetData() );
-                wxMessageBox( msg, _( "Open Board File" ), wxOK | wxICON_ERROR );
-            }
-
-            GetBoard()->SetPlotOptions( plot_opts );
-
-            continue;
-        }
-
-        strtok( line, delims );
-        data = strtok( NULL, delims );
-
-        if( stricmp( line, "$EndSETUP" ) == 0 )
-        {
-            // Until such time as the *.brd file does not have the
-            // global parameters:
-            // "TrackWidth", "TrackMinWidth", "ViaSize", "ViaDrill",
-            // "ViaMinSize", and "TrackClearence", put those same global
-            // values into the default NETCLASS until later board load
-            // code should override them.  *.brd files which have been
-            // saved with knowledge of NETCLASSes will override these
-            // defaults, old boards will not.
-            //
-            // @todo: I expect that at some point we can remove said global
-            //        parameters from the *.brd file since the ones in the
-            //        default netclass serve the same purpose.  If needed
-            //        at all, the global defaults should go into a preferences
-            //        file instead so they are there to start new board
-            //        projects.
-            GetBoard()->m_NetClasses.GetDefault()->SetParams();
-
-            GetBoard()->SetDesignSettings( bds );
-
-            GetBoard()->SetZoneSettings( zoneInfo );
-
-            return 0;
-        }
-
-        if( stricmp( line, "AuxiliaryAxisOrg" ) == 0 )
-        {
-            int gx = 0, gy = 0;
-            gx   = atoi( data );
-            data = strtok( NULL, delims );
-
-            if( data )
-                gy = atoi( data );
-
-            SetOriginAxisPosition( wxPoint( gx, gy ) );
-            continue;
-        }
-
-#ifdef PCBNEW
-
-        if( stricmp( line, "Layers" ) == 0 )
-        {
-            int tmp;
-            sscanf( data, "%d", &tmp );
-            GetBoard()->SetCopperLayerCount( tmp );
-            continue;
-        }
-
-        const int LAYERKEYZ = sizeof("Layer[") - 1;
-
-        if( strncmp( line, "Layer[", LAYERKEYZ ) == 0 )
-        {
-            // parse:
-            // Layer[n]  <a_Layer_name_with_no_spaces> <LAYER_T>
-
-            char* cp    = line + LAYERKEYZ;
-            int   layer = atoi( cp );
-
-            if( data )
-            {
-                wxString layerName = FROM_UTF8( data );
-                GetBoard()->SetLayerName( layer, layerName );
-
-                data = strtok( NULL, " \n\r" );
-
-                if( data )
-                {
-                    LAYER_T type = LAYER::ParseType( data );
-                    GetBoard()->SetLayerType( layer, type );
-                }
-            }
-
-            continue;
-        }
-
-        if( stricmp( line, "TrackWidth" ) == 0 )    // no more used
-        {
-            continue;
-        }
-
-        if( stricmp( line, "TrackWidthList" ) == 0 )
-        {
-            int tmp = atoi( data );
-            GetBoard()->m_TrackWidthList.push_back( tmp );
-            continue;
-        }
-
-        if( stricmp( line, "TrackClearence" ) == 0 )
-        {
-            netclass_default->SetClearance( atoi( data ) );
-            continue;
-        }
-
-        if( stricmp( line, "TrackMinWidth" ) == 0 )
-        {
-            bds.m_TrackMinWidth = atoi( data );
-            continue;
-        }
-
-        if( stricmp( line, "ZoneClearence" ) == 0 )
-        {
-            zoneInfo.m_ZoneClearance = atoi( data );
-            continue;
-        }
-
-        if( stricmp( line, "DrawSegmWidth" ) == 0 )
-        {
-            bds.m_DrawSegmentWidth = atoi( data );
-            continue;
-        }
-
-        if( stricmp( line, "EdgeSegmWidth" ) == 0 )
-        {
-            bds.m_EdgeSegmentWidth = atoi( data );
-            continue;
-        }
-
-        if( stricmp( line, "ViaSize" ) == 0 )    // no more used
-        {
-            continue;
-        }
-
-        if( stricmp( line, "ViaMinSize" ) == 0 )
-        {
-            bds.m_ViasMinSize = atoi( data );
-            continue;
-        }
-
-        if( stricmp( line, "MicroViaSize" ) == 0 )  // Not used
-        {
-            continue;
-        }
-
-        if( stricmp( line, "MicroViaMinSize" ) == 0 )
-        {
-            bds.m_MicroViasMinSize = atoi( data );
-            continue;
-        }
-
-        if( stricmp( line, "ViaSizeList" ) == 0 )
-        {
-            int           tmp = atoi( data );
-            VIA_DIMENSION via_dim;
-            via_dim.m_Diameter = tmp;
-            data = strtok( NULL, " \n\r" );
-
-            if( data )
-            {
-                tmp = atoi( data );
-                via_dim.m_Drill = tmp > 0 ? tmp : 0;
-            }
-
-            GetBoard()->m_ViasDimensionsList.push_back( via_dim );
-            continue;
-        }
-
-        if( stricmp( line, "ViaDrill" ) == 0 )
-        {
-            int diameter = atoi( data );
-            netclass_default->SetViaDrill( diameter );
-            continue;
-        }
-
-        if( stricmp( line, "ViaMinDrill" ) == 0 )
-        {
-            bds.m_ViasMinDrill = atoi( data );
-            continue;
-        }
-
-        if( stricmp( line, "MicroViaDrill" ) == 0 )
-        {
-            int diameter = atoi( data );
-            netclass_default->SetuViaDrill( diameter );
-            continue;
-        }
-
-        if( stricmp( line, "MicroViaMinDrill" ) == 0 )
-        {
-            int diameter = atoi( data );
-            bds.m_MicroViasMinDrill = diameter;
-            continue;
-        }
-
-        if( stricmp( line, "MicroViasAllowed" ) == 0 )
-        {
-            bds.m_MicroViasAllowed = atoi( data );
-            continue;
-        }
-
-        if( stricmp( line, "TextPcbWidth" ) == 0 )
-        {
-            bds.m_PcbTextWidth = atoi( data );
-            continue;
-        }
-
-        if( stricmp( line, "TextPcbSize" ) == 0 )
-        {
-            bds.m_PcbTextSize.x = atoi( data );
-            data = strtok( NULL, delims );
-            bds.m_PcbTextSize.y = atoi( data );
-            continue;
-        }
-
-        if( stricmp( line, "EdgeModWidth" ) == 0 )
-        {
-            bds.m_ModuleSegmentWidth = atoi( data );
-            continue;
-        }
-
-        if( stricmp( line, "TextModWidth" ) == 0 )
-        {
-            bds.m_ModuleTextWidth = atoi( data );
-            continue;
-        }
-
-        if( stricmp( line, "TextModSize" ) == 0 )
-        {
-            bds.m_ModuleTextSize.x = atoi( data );
-            data = strtok( NULL, delims );
-            bds.m_ModuleTextSize.y = atoi( data );
-            continue;
-        }
-
-        if( stricmp( line, "PadSize" ) == 0 )
-        {
-            int x = atoi( data );
-            data = strtok( NULL, delims );
-            int y = atoi( data );
-            bds.m_Pad_Master.SetSize( wxSize( x, y ) );
-            continue;
-        }
-
-        if( stricmp( line, "PadDrill" ) == 0 )
-        {
-            int sz = atoi( data );
-            bds.m_Pad_Master.SetSize( wxSize( sz, sz ) );
-            continue;
-        }
-
-        if( stricmp( line, "Pad2MaskClearance" ) == 0 )
-        {
-            bds.m_SolderMaskMargin = atoi( data );
-            continue;
-        }
-
-        if( stricmp( line, "Pad2PasteClearance" ) == 0 )
-        {
-            bds.m_SolderPasteMargin = atoi( data );
-            continue;
-        }
-
-        if( stricmp( line, "Pad2PasteClearanceRatio" ) == 0 )
-        {
-            bds.m_SolderPasteMarginRatio = atof( data );
-            continue;
-        }
-
-        if( stricmp( line, "GridOrigin" ) == 0 )
-        {
-            int Ox = 0;
-            int Oy = 0;
-
-            Ox = atoi( data );
-            data = strtok( NULL, delims );
-
-            if ( data )
-                Oy = atoi( data );
-
-            GetScreen()->m_GridOrigin.x = Ox;
-            GetScreen()->m_GridOrigin.y = Oy;
-            continue;
-        }
-
-        if( stricmp( line, "VisibleElements" ) == 0 )
-        {
-            int visibleElements = strtoul( data, 0, 16 );
-            bds.SetVisibleElements( visibleElements );
-            continue;
-        }
-#endif
-
-    }
-
-    /* Ensure tracks and vias sizes lists are ok:
-     * Sort lists by by increasing value and remove duplicates
-     * (the first value is not tested, because it is the netclass value
-     */
-    sort( GetBoard()->m_ViasDimensionsList.begin() + 1, GetBoard()->m_ViasDimensionsList.end() );
-    sort( GetBoard()->m_TrackWidthList.begin() + 1, GetBoard()->m_TrackWidthList.end() );
-
-    for( unsigned ii = 1; ii < GetBoard()->m_ViasDimensionsList.size() - 1; ii++ )
-    {
-        if( GetBoard()->m_ViasDimensionsList[ii] == GetBoard()->m_ViasDimensionsList[ii + 1] )
-        {
-            GetBoard()->m_ViasDimensionsList.erase( GetBoard()->m_ViasDimensionsList.begin() + ii );
-            ii--;
-        }
-    }
-
-    for( unsigned ii = 1; ii < GetBoard()->m_TrackWidthList.size() - 1; ii++ )
-    {
-        if( GetBoard()->m_TrackWidthList[ii] == GetBoard()->m_TrackWidthList[ii + 1] )
-        {
-            GetBoard()->m_TrackWidthList.erase( GetBoard()->m_TrackWidthList.begin() + ii );
-            ii--;
-        }
-    }
-
-    return 1;
-}
-
-
-#ifdef PCBNEW
-
-static int WriteSetup( FILE* aFile, PCB_EDIT_FRAME* aFrame, BOARD* aBoard )
-{
-    const BOARD_DESIGN_SETTINGS& bds = aBoard->GetDesignSettings();
-    NETCLASS* netclass_default = aBoard->m_NetClasses.GetDefault();
-    char      text[1024];
-
-    fprintf( aFile, "$SETUP\n" );
-    sprintf( text, "InternalUnit %f INCH\n", 1.0 / PCB_INTERNAL_UNIT );
-    fprintf( aFile, "%s", text );
-
-    fprintf( aFile, "Layers %d\n", aBoard->GetCopperLayerCount() );
-
-    unsigned layerMask = g_TabAllCopperLayerMask[aBoard->GetCopperLayerCount() - 1];
-
-    for( int layer = 0; layerMask; ++layer, layerMask >>= 1 )
-    {
-        if( layerMask & 1 )
-        {
-            fprintf( aFile, "Layer[%d] %s %s\n", layer,
-                     TO_UTF8( aBoard->GetLayerName( layer ) ),
-                     LAYER::ShowType( aBoard->GetLayerType( layer ) ) );
-        }
-    }
-
-    // Save current default track width, for compatibility with older Pcbnew version;
-    fprintf( aFile, "TrackWidth %d\n", aBoard->GetCurrentTrackWidth() );
-
-    // Save custom tracks width list (the first is not saved here: this is the netclass value
-    for( unsigned ii = 1; ii < aBoard->m_TrackWidthList.size(); ii++ )
-        fprintf( aFile, "TrackWidthList %d\n", aBoard->m_TrackWidthList[ii] );
-
-
-    fprintf( aFile, "TrackClearence %d\n", netclass_default->GetClearance() );
-    fprintf( aFile, "ZoneClearence %d\n", aBoard->GetZoneSettings().m_ZoneClearance );
-    fprintf( aFile, "TrackMinWidth %d\n", bds.m_TrackMinWidth );
-
-    fprintf( aFile, "DrawSegmWidth %d\n", bds.m_DrawSegmentWidth );
-    fprintf( aFile, "EdgeSegmWidth %d\n", bds.m_EdgeSegmentWidth );
-
-    // Save current default via size, for compatibility with older Pcbnew version;
-    fprintf( aFile, "ViaSize %d\n", netclass_default->GetViaDiameter() );
-    fprintf( aFile, "ViaDrill %d\n", netclass_default->GetViaDrill() );
-    fprintf( aFile, "ViaMinSize %d\n", bds.m_ViasMinSize );
-    fprintf( aFile, "ViaMinDrill %d\n", bds.m_ViasMinDrill );
-
-    // Save custom vias diameters list (the first is not saved here: this is
-    // the netclass value
-    for( unsigned ii = 1; ii < aBoard->m_ViasDimensionsList.size(); ii++ )
-        fprintf( aFile, "ViaSizeList %d %d\n",
-                 aBoard->m_ViasDimensionsList[ii].m_Diameter,
-                 aBoard->m_ViasDimensionsList[ii].m_Drill );
-
-    // for old versions compatibility:
-    fprintf( aFile, "MicroViaSize %d\n", netclass_default->GetuViaDiameter() );
-    fprintf( aFile, "MicroViaDrill %d\n", netclass_default->GetuViaDrill() );
-    fprintf( aFile,
-             "MicroViasAllowed %d\n",
-             bds.m_MicroViasAllowed );
-    fprintf( aFile,
-             "MicroViaMinSize %d\n",
-             bds.m_MicroViasMinSize );
-    fprintf( aFile,
-             "MicroViaMinDrill %d\n",
-             bds.m_MicroViasMinDrill );
-
-    fprintf( aFile, "TextPcbWidth %d\n", bds.m_PcbTextWidth );
-    fprintf( aFile,
-             "TextPcbSize %d %d\n",
-             bds.m_PcbTextSize.x,
-             bds.m_PcbTextSize.y );
-
-    fprintf( aFile, "EdgeModWidth %d\n", bds.m_ModuleSegmentWidth );
-    fprintf( aFile, "TextModSize %d %d\n", bds.m_ModuleTextSize.x, bds.m_ModuleTextSize.y );
-    fprintf( aFile, "TextModWidth %d\n", bds.m_ModuleTextWidth );
-
-    fprintf( aFile, "PadSize %d %d\n", bds.m_Pad_Master.GetSize().x,
-                                       bds.m_Pad_Master.GetSize().y );
-
-    fprintf( aFile, "PadDrill %d\n", bds.m_Pad_Master.GetDrillSize().x );
-    fprintf( aFile,
-             "Pad2MaskClearance %d\n",
-             bds.m_SolderMaskMargin );
-
-    if( bds.m_SolderPasteMargin != 0 )
-        fprintf( aFile,
-                 "Pad2PasteClearance %d\n",
-                 bds.m_SolderPasteMargin );
-
-    if( bds.m_SolderPasteMarginRatio != 0 )
-        fprintf( aFile,
-                 "Pad2PasteClearanceRatio %g\n",
-                 bds.m_SolderPasteMarginRatio );
-
-    if ( aFrame->GetScreen()->m_GridOrigin != wxPoint( 0, 0 ) )
-    {
-        fprintf( aFile,
-                 "GridOrigin %d %d\n",
-                 aFrame->GetScreen()->m_GridOrigin.x,
-                 aFrame->GetScreen()->m_GridOrigin.y );
-    }
-
-    fprintf( aFile,
-             "AuxiliaryAxisOrg %d %d\n",
-             aFrame->GetOriginAxisPosition().x,
-             aFrame->GetOriginAxisPosition().y );
-
-    fprintf( aFile, "VisibleElements %X\n", bds.GetVisibleElements() );
-
-    STRING_FORMATTER sf;
-
-    aBoard->GetPlotOptions().Format( &sf, 0 );
-
-    wxString record = FROM_UTF8( sf.GetString().c_str() );
-    record.Replace( wxT("\n"), wxT(""), true );
-    record.Replace( wxT("  "), wxT(" "), true);
-    fprintf( aFile, "PcbPlotParams %s\n", TO_UTF8( record ) );
-    fprintf( aFile, "$EndSETUP\n\n" );
-    return 1;
-}
-
-
-#endif
-
-
-bool PCB_EDIT_FRAME::WriteGeneralDescrPcb( FILE* File )
-{
-    EDA_ITEM* PtStruct = GetBoard()->m_Modules;
-    int       NbModules, NbDrawItem, NbLayers;
-
-    // Write copper layer count
-    NbLayers = GetBoard()->GetCopperLayerCount();
-    fprintf( File, "$GENERAL\n" );
-    fprintf( File, "encoding utf-8\n");
-    fprintf( File, "LayerCount %d\n", NbLayers );
-
-    // Write old format for Layer count (for compatibility with old versions of
-    // pcbnew
-    fprintf( File,
-             "Ly %8X\n",
-             g_TabAllCopperLayerMask[NbLayers - 1] | ALL_NO_CU_LAYERS );
-
-    fprintf( File, "EnabledLayers %08X\n", GetBoard()->GetEnabledLayers() );
-
-    if( GetBoard()->GetEnabledLayers() != GetBoard()->GetVisibleLayers() )
-        fprintf( File, "VisibleLayers %08X\n", GetBoard()->GetVisibleLayers() );
-
-    fprintf( File, "Links %d\n", GetBoard()->GetRatsnestsCount() );
-    fprintf( File, "NoConn %d\n", GetBoard()->m_NbNoconnect );
-
-    // Write board's bounding box info
-    EDA_RECT bbbox = GetBoard()->ComputeBoundingBox();
-    fprintf( File, "Di %d %d %d %d\n",
-             bbbox.GetX(),
-             bbbox.GetY(),
-             bbbox.GetRight(),
-             bbbox.GetBottom() );
-
-    // Write segment count for footprints, drawings, track and zones
-    // Calculate the footprint count
-    for( NbModules = 0; PtStruct != NULL; PtStruct = PtStruct->Next() )
-        NbModules++;
-
-    PtStruct = GetBoard()->m_Drawings; NbDrawItem = 0;
-
-    for( ; PtStruct != NULL; PtStruct = PtStruct->Next() )
-        NbDrawItem++;
-
-    fprintf( File, "Ndraw %d\n", NbDrawItem );
-    fprintf( File, "Ntrack %d\n", GetBoard()->GetNumSegmTrack() );
-    fprintf( File, "Nzone %d\n", GetBoard()->GetNumSegmZone() );
-    fprintf( File, "BoardThickness %d\n", GetBoard()->GetDesignSettings().m_BoardThickness );
-    fprintf( File, "Nmodule %d\n", NbModules );
-    fprintf( File, "Nnets %d\n", GetBoard()->GetNetCount() );
-    fprintf( File, "$EndGENERAL\n\n" );
-    return true;
-}
-
-
-/**
- * Function WriteSheetDescr
- * Save the page information (size, texts, date ..)
- * @param aPageSettings The page settings to write to \a aFile.
- * @param aTitleBlock The title block information to write to \a aFile.
- * @param aFile An open FILE to write info.
- */
-static bool WriteSheetDescr( const PAGE_INFO& aPageSettings, const TITLE_BLOCK& aTitleBlock,
-                             FILE* aFile )
-{
-    fprintf( aFile, "$SHEETDESCR\n" );
-    fprintf( aFile, "Sheet %s %d %d%s\n",
-             TO_UTF8( aPageSettings.GetType() ),
-             aPageSettings.GetWidthMils(),
-             aPageSettings.GetHeightMils(),
-             !aPageSettings.IsCustom() && aPageSettings.IsPortrait() ?
-                " portrait" : ""
-             );
-
-    fprintf( aFile, "Title %s\n",        EscapedUTF8( aTitleBlock.GetTitle() ).c_str() );
-    fprintf( aFile, "Date %s\n",         EscapedUTF8( aTitleBlock.GetDate() ).c_str() );
-    fprintf( aFile, "Rev %s\n",          EscapedUTF8( aTitleBlock.GetRevision() ).c_str() );
-    fprintf( aFile, "Comp %s\n",         EscapedUTF8( aTitleBlock.GetCompany() ).c_str() );
-    fprintf( aFile, "Comment1 %s\n",     EscapedUTF8( aTitleBlock.GetComment1() ).c_str() );
-    fprintf( aFile, "Comment2 %s\n",     EscapedUTF8( aTitleBlock.GetComment2() ).c_str() );
-    fprintf( aFile, "Comment3 %s\n",     EscapedUTF8( aTitleBlock.GetComment3() ).c_str() );
-    fprintf( aFile, "Comment4 %s\n",     EscapedUTF8( aTitleBlock.GetComment4() ).c_str() );
-
-    fprintf( aFile, "$EndSHEETDESCR\n\n" );
-    return true;
-}
-
-
-#if !defined( USE_NEW_PCBNEW_LOAD )
-
-static bool ReadSheetDescr( BOARD* aBoard, LINE_READER* aReader )
-{
-    char        buf[1024];
-    TITLE_BLOCK tb;
-
-    while( aReader->ReadLine() )
-    {
-        char* line = aReader->Line();
-
-        if( strnicmp( line, "$End", 4 ) == 0 )
-        {
-            aBoard->SetTitleBlock( tb );
-            return true;
-        }
-
-        if( strnicmp( line, "Sheet", 4 ) == 0 )
-        {
-            // e.g. "Sheet A3 16535 11700"
-            // width and height are in 1/1000th of an inch, always
-
-            PAGE_INFO   page;
-            char*       sname  = strtok( line + SZ( "Sheet" ), delims );
-
-            if( sname )
-            {
-                wxString wname = FROM_UTF8( sname );
-                if( !page.SetType( wname ) )
-                {
-                    /* this entire file is soon to be deleted.
-                    m_error.Printf( _( "Unknown sheet type '%s' on line:%d" ),
-                                wname.GetData(), m_reader->LineNumber() );
-                    THROW_IO_ERROR( m_error );
-                    */
-                }
-
-                char*   width  = strtok( NULL, delims );
-                char*   height = strtok( NULL, delims );
-                char*   orient = strtok( NULL, delims );
-
-                // only keep width and height if page size is "User"
-                if( wname == PAGE_INFO::Custom )
-                {
-                    if( width && height )
-                    {
-                        // legacy disk file describes paper in mils
-                        // (1/1000th of an inch)
-                        int w = atoi( width );
-                        int h = atoi( height );
-
-                        page.SetWidthMils(  w );
-                        page.SetHeightMils( h );
-                    }
-                }
-
-                if( orient && !strcmp( orient, "portrait" ) )
-                {
-                    page.SetPortrait( true );
-                }
-
-                aBoard->SetPageSettings( page );
-            }
-
-            continue;
-        }
-
-        if( strnicmp( line, "Title", 2 ) == 0 )
-        {
-            ReadDelimitedText( buf, line, 256 );
-            tb.SetTitle( FROM_UTF8( buf ) );
-            continue;
-        }
-
-        if( strnicmp( line, "Date", 2 ) == 0 )
-        {
-            ReadDelimitedText( buf, line, 256 );
-            tb.SetDate( FROM_UTF8( buf ) );
-            continue;
-        }
-
-        if( strnicmp( line, "Rev", 2 ) == 0 )
-        {
-            ReadDelimitedText( buf, line, 256 );
-            tb.SetRevision( FROM_UTF8( buf ) );
-            continue;
-        }
-
-        if( strnicmp( line, "Comp", 4 ) == 0 )
-        {
-            ReadDelimitedText( buf, line, 256 );
-            tb.SetCompany( FROM_UTF8( buf ) );
-            continue;
-        }
-
-        if( strnicmp( line, "Comment1", 8 ) == 0 )
-        {
-            ReadDelimitedText( buf, line, 256 );
-            tb.SetComment1( FROM_UTF8( buf ) );
-            continue;
-        }
-
-        if( strnicmp( line, "Comment2", 8 ) == 0 )
-        {
-            ReadDelimitedText( buf, line, 256 );
-            tb.SetComment2( FROM_UTF8( buf ) );
-            continue;
-        }
-
-        if( strnicmp( line, "Comment3", 8 ) == 0 )
-        {
-            ReadDelimitedText( buf, line, 256 );
-            tb.SetComment3( FROM_UTF8( buf ) );
-            continue;
-        }
-
-        if( strnicmp( line, "Comment4", 8 ) == 0 )
-        {
-            ReadDelimitedText( buf, line, 256 );
-            tb.SetComment4( FROM_UTF8( buf ) );
-            continue;
-        }
-    }
-
-    return false;
-}
-
-
-int PCB_EDIT_FRAME::ReadPcbFile( LINE_READER* aReader, bool Append )
-{
-    wxBusyCursor dummy;
-
-    // Switch the locale to standard C (needed to read floating point numbers
-    // like 1.3)
-    SetLocaleTo_C_standard();
-
-    BOARD* board = GetBoard();
-
-    board->m_Status_Pcb = 0;
-    board->m_NetClasses.Clear();
-
-    // Put a dollar sign in front, and test for a specific length of characters
-    // The -1 is to omit the trailing \0 which is included in sizeof() on a
-    // string.
-#define TESTLINE( x ) (strncmp( line, "$" x, sizeof("$" x) - 1 ) == 0)
-
-    while( aReader->ReadLine() )
-    {
-        char* line = aReader->Line();
-
-        // put the more frequent ones at the top
-
-        if( TESTLINE( "MODULE" ) )
-        {
-            MODULE* module = new MODULE( board );
-            board->Add( module, ADD_APPEND );
-            module->ReadDescr( aReader );
-            continue;
-        }
-
-        if( TESTLINE( "DRAWSEGMENT" ) )
-        {
-            DRAWSEGMENT* dseg = new DRAWSEGMENT( board );
-            board->Add( dseg, ADD_APPEND );
-            dseg->ReadDrawSegmentDescr( aReader );
-            continue;
-        }
-
-        if( TESTLINE( "EQUIPOT" ) )
-        {
-            NETINFO_ITEM* net = new NETINFO_ITEM( board );
-            board->m_NetInfo.AppendNet( net );
-            net->ReadDescr( aReader );
-            continue;
-        }
-
-        if( TESTLINE( "TEXTPCB" ) )
-        {
-            TEXTE_PCB* pcbtxt = new TEXTE_PCB( board );
-            board->Add( pcbtxt, ADD_APPEND );
-            pcbtxt->ReadTextePcbDescr( aReader );
-            continue;
-        }
-
-        if( TESTLINE( "TRACK" ) )
-        {
-
-#ifdef PCBNEW
-            TRACK* insertBeforeMe = Append ? NULL : board->m_Track.GetFirst();
-            ReadListeSegmentDescr( aReader, insertBeforeMe, PCB_TRACE_T, NbTrack );
-#endif
-
-            continue;
-        }
-
-        if( TESTLINE( "NCLASS" ) )
-        {
-            // create an empty NETCLASS without a name.
-            NETCLASS* netclass = new NETCLASS( board, wxEmptyString );
-
-            // fill it from the *.brd file, and establish its name.
-            netclass->ReadDescr( aReader );
-
-            if( !board->m_NetClasses.Add( netclass ) )
-            {
-                // Must have been a name conflict, this is a bad board file.
-                // User may have done a hand edit to the file.
-                // Delete netclass if board could not take ownership of it.
-                delete netclass;
-
-                // @todo: throw an exception here, this is a bad board file.
-            }
-
-            continue;
-        }
-
-        if( TESTLINE( "CZONE_OUTLINE" ) )
-        {
-            ZONE_CONTAINER* zone_descr = new ZONE_CONTAINER( board );
-            zone_descr->ReadDescr( aReader );
-            if( zone_descr->GetNumCorners() > 2 )       // should always occur
-                board->Add( zone_descr );
-            else
-                delete zone_descr;
-            continue;
-        }
-
-        if( TESTLINE( "COTATION" ) )
-        {
-            DIMENSION* dim = new DIMENSION( board );
-            board->Add( dim, ADD_APPEND );
-            dim->ReadDimensionDescr( aReader );
-            continue;
-        }
-
-        if( TESTLINE( "PCB_TARGET" ) || TESTLINE( "MIREPCB" ) )
-        {
-            PCB_TARGET* t = new PCB_TARGET( board );
-            board->Add( t, ADD_APPEND );
-            t->ReadMirePcbDescr( aReader );
-            continue;
-        }
-
-        if( TESTLINE( "ZONE" ) )
-        {
-#ifdef PCBNEW
-            SEGZONE* insertBeforeMe = Append ? NULL : board->m_Zone.GetFirst();
-
-            ReadListeSegmentDescr( aReader, insertBeforeMe, PCB_ZONE_T, NbZone );
-#endif
-            continue;
-        }
-
-        if( TESTLINE( "GENERAL" ) )
-        {
-            ReadGeneralDescrPcb( aReader );
-            continue;
-        }
-
-        if( TESTLINE( "SHEETDESCR" ) )
-        {
-            ReadSheetDescr( board, aReader );
-            continue;
-        }
-
-        if( TESTLINE( "SETUP" ) )
-        {
-            if( !Append )
-            {
-                ReadSetup( aReader );
-            }
-            else
-            {
-                while( aReader->ReadLine() )
-                {
-                    line = aReader->Line();
-
-                    if( TESTLINE( "EndSETUP" ) )
-                        break;
-                }
-            }
-
-            continue;
-        }
-
-        if( TESTLINE( "EndPCB" ) )
-            break;
-    }
-
-    SetLocaleTo_Default();       // revert to the current  locale
-
-    board->m_Status_Pcb = 0;
-
-    // Build the net info list
-    board->BuildListOfNets();
-
-    board->SynchronizeNetsAndNetClasses();
-
-    SetStatusText( wxEmptyString );
-    BestZoom();
-    return 1;
-}
-
-#endif
-
-
-#ifdef PCBNEW
-
-/* Save the current PCB in ASCII format
- * Returns
- * 1 if OK
- * 0 if error occurs saving file.
- */
-int PCB_EDIT_FRAME::SavePcbFormatAscii( FILE* aFile )
-{
-    bool rc;
-
-    GetBoard()->m_Status_Pcb &= ~CONNEXION_OK;
-
-    wxBeginBusyCursor();
-
-    // Switch the locale to standard C (needed to print floating point numbers
-    // like 1.3)
-    LOCALE_IO   toggle;
-
-    // Writing file header.
-    fprintf( aFile, "PCBNEW-BOARD Version %d date %s\n\n", LEGACY_BOARD_FILE_VERSION,
-             TO_UTF8( DateAndTime() ) );
-    fprintf( aFile, "# Created by Pcbnew%s\n\n", TO_UTF8( GetBuildVersion() ) );
-
-    GetBoard()->SynchronizeNetsAndNetClasses();
-
-    // Select default Netclass before writing file.
-    // Useful to save default values in headers
-    GetBoard()->SetCurrentNetClass( GetBoard()->m_NetClasses.GetDefault()->GetName() );
-
-    WriteGeneralDescrPcb( aFile );
-    WriteSheetDescr( GetBoard()->GetPageSettings(), GetBoard()->GetTitleBlock(), aFile );
-    WriteSetup( aFile, this, GetBoard() );
-
-    rc = GetBoard()->Save( aFile );
-
-    wxEndBusyCursor();
-
-    if( !rc )
-        DisplayError( this, wxT( "Unable to save PCB file" ) );
-    else
-        SetStatusText( wxEmptyString );
-
-    return rc;
-}
-
-#endif

pcbnew/item_io.cpp.notused

-
- /**
- * @file item_io.cpp
- * @brief Routines for reading and saving of structures in ASCII file common to Pcbnew and CvPcb.
- *  This is migrationary and temporary while we move the IO_MGR.
- */
-
-#include <fctsys.h>
-#include <confirm.h>
-#include <kicad_string.h>
-#include <build_version.h>
-#include <wxPcbStruct.h>
-#include <richio.h>
-#include <macros.h>
-#include <pcbcommon.h>
-
-#include <zones.h>
-
-#ifdef CVPCB
-#include <cvpcb.h>
-#endif
-
-#include <config.h>
-#include <class_board.h>
-#include <class_module.h>
-#include <class_track.h>
-#include <class_pcb_text.h>
-#include <class_zone.h>
-#include <class_dimension.h>
-#include <class_drawsegment.h>
-#include <class_mire.h>
-
-#include <pcbnew.h>
-#include <pcbnew_id.h>
-#include <autorout.h>
-
-#include <3d_struct.h>
-#include <trigo.h>
-#include <class_edge_mod.h>
-#include <pcbnew.h>
-#include <drawtxt.h>
-
-#define MAX_WIDTH 10000  // Thickness (in 1 / 10000 ") of maximum reasonable features, text...
-
-
-#if 1 || !defined(USE_NEW_PCBNEW_SAVE)
-
-bool BOARD::Save( FILE* aFile ) const
-{
-    bool        rc = false;
-    BOARD_ITEM* item;
-
-    // save the nets
-    for( unsigned ii = 0; ii < GetNetCount(); ii++ )
-        if( !FindNet( ii )->Save( aFile ) )
-            goto out;
-
-    // Saved nets do not include netclass names, so save netclasses after nets.
-    m_NetClasses.Save( aFile );
-
-    // save the modules
-    for( item = m_Modules; item; item = item->Next() )
-        if( !item->Save( aFile ) )
-            goto out;
-
-    for( item = m_Drawings; item; item = item->Next() )
-    {
-        switch( item->Type() )
-        {
-        case PCB_TEXT_T:
-        case PCB_LINE_T:
-        case PCB_TARGET_T:
-        case PCB_DIMENSION_T:
-            if( !item->Save( aFile ) )
-                goto out;
-
-            break;
-
-        default:
-
-            // future: throw exception here
-#if defined(DEBUG)
-            printf( "BOARD::Save() ignoring m_Drawings type %d\n", item->Type() );
-#endif
-            break;
-        }
-    }
-
-    // do not save MARKER_PCBs, they can be regenerated easily
-
-    // save the tracks & vias
-    fprintf( aFile, "$TRACK\n" );
-
-    for( item = m_Track; item; item = item->Next() )
-    {
-        if( !item->Save( aFile ) )
-            goto out;
-    }
-
-    fprintf( aFile, "$EndTRACK\n" );
-
-    // save the zones
-    fprintf( aFile, "$ZONE\n" );
-
-    for( item = m_Zone; item; item = item->Next() )
-    {
-        if( !item->Save( aFile ) )
-            goto out;
-    }
-
-    fprintf( aFile, "$EndZONE\n" );
-
-    // save the zone edges
-    for( unsigned ii = 0; ii < m_ZoneDescriptorList.size(); ii++ )
-    {
-        ZONE_CONTAINER* edge_zone = m_ZoneDescriptorList[ii];
-        edge_zone->Save( aFile );
-    }
-
-
-    if( fprintf( aFile, "$EndBOARD\n" ) != sizeof("$EndBOARD\n") - 1 )
-        goto out;
-
-    rc = true;  // wrote all OK
-
-out:
-    return rc;
-}
-
-
-bool DRAWSEGMENT::Save( FILE* aFile ) const
-{
-    if( fprintf( aFile, "$DRAWSEGMENT\n" ) != sizeof("$DRAWSEGMENT\n") - 1 )
-        return false;
-
-    fprintf( aFile, "Po %d %d %d %d %d %d\n",
-             m_Shape,
-             m_Start.x, m_Start.y,
-             m_End.x, m_End.y, m_Width );
-
-    if( m_Type != S_CURVE )
-    {
-        fprintf( aFile, "De %d %d %g %lX %X\n",
-                 m_Layer, m_Type, GetAngle(),
-                 m_TimeStamp, GetStatus() );
-    }
-    else
-    {
-        fprintf( aFile, "De %d %d %g %lX %X %d %d %d %d\n",
-                 m_Layer, m_Type, GetAngle(),
-                 m_TimeStamp, GetStatus(),
-                 m_BezierC1.x,m_BezierC1.y,
-                 m_BezierC2.x,m_BezierC2.y);
-    }
-
-    if( fprintf( aFile, "$EndDRAWSEGMENT\n" ) != sizeof("$EndDRAWSEGMENT\n") - 1 )
-        return false;
-
-    return true;
-}
-
-
-/** Note: the old name of class NETINFO_ITEM was EQUIPOT
- * so in Save (and read) functions, for compatibility, we use EQUIPOT as
- * keyword
- */
-bool NETINFO_ITEM::Save( FILE* aFile ) const
-{
-    bool success = false;
-
-    fprintf( aFile, "$EQUIPOT\n" );
-    fprintf( aFile, "Na %d %s\n", GetNet(), EscapedUTF8( m_Netname ).c_str() );
-    fprintf( aFile, "St %s\n", "~" );
-
-    if( fprintf( aFile, "$EndEQUIPOT\n" ) != sizeof("$EndEQUIPOT\n") - 1 )
-        goto out;
-
-    success = true;
-
-out:
-    return success;
-}
-
-
-bool PCB_TARGET::Save( FILE* aFile ) const
-{
-    bool rc = false;
-
-    if( fprintf( aFile, "$PCB_TARGET\n" ) != sizeof("$PCB_TARGET\n")-1 )
-        goto out;
-
-    fprintf( aFile, "Po %X %d %d %d %d %d %8.8lX\n",
-             m_Shape, m_Layer,
-             m_Pos.x, m_Pos.y,
-             m_Size, m_Width, m_TimeStamp );
-
-    if( fprintf( aFile, "$EndPCB_TARGET\n" ) != sizeof("$EndPCB_TARGET\n")-1 )
-        goto out;
-
-    rc = true;
-
-out:
-    return rc;
-}
-
-
-bool ZONE_CONTAINER::Save( FILE* aFile ) const
-{
-    unsigned item_pos;
-    int      ret;
-    unsigned corners_count = m_Poly->corner.size();
-    int      outline_hatch;
-
-    fprintf( aFile, "$CZONE_OUTLINE\n" );
-
-    // Save the outline main info
-    ret = fprintf( aFile, "ZInfo %8.8lX %d %s\n",
-                   m_TimeStamp, GetNet(),
-                   EscapedUTF8( m_Netname ).c_str() );
-
-    if( ret < 3 )
-        return false;
-
-    // Save the outline layer info
-    ret = fprintf( aFile, "ZLayer %d\n", m_Layer );
-
-    if( ret < 1 )
-        return false;
-
-    // Save the outline aux info
-    switch( m_Poly->GetHatchStyle() )
-    {
-    default:
-    case CPolyLine::NO_HATCH:
-        outline_hatch = 'N';
-        break;
-
-    case CPolyLine::DIAGONAL_EDGE:
-        outline_hatch = 'E';
-        break;
-
-    case CPolyLine::DIAGONAL_FULL:
-        outline_hatch = 'F';
-        break;
-    }
-
-    ret = fprintf( aFile, "ZAux %d %c\n", corners_count, outline_hatch );
-
-    if( ret < 2 )
-        return false;
-
-    if( GetPriority() > 0 )
-    {
-        ret = fprintf( aFile, "ZPriority %d\n", GetPriority() );
-        if( ret < 1 )
-            return false;
-    }
-
-    // Save pad option and clearance
-    int padConnection;
-    switch( m_PadConnection )
-    {
-    default:
-    case PAD_IN_ZONE:
-        padConnection = 'I';
-        break;
-
-    case THERMAL_PAD:
-        padConnection = 'T';
-        break;
-
-    case PAD_NOT_IN_ZONE:
-        padConnection = 'X';
-        break;
-    }
-
-    ret = fprintf( aFile, "ZClearance %d %c\n", m_ZoneClearance, padConnection );
-
-    if( ret < 2 )
-        return false;
-
-    ret = fprintf( aFile, "ZMinThickness %d\n", m_ZoneMinThickness );
-
-    if( ret < 1 )
-        return false;
-
-    ret = fprintf( aFile,
-                   "ZOptions %d %d %c %d %d\n",
-                   m_FillMode,
-                   m_ArcToSegmentsCount,
-                   m_IsFilled ? 'S' : 'F',
-                   m_ThermalReliefGap,
-                   m_ThermalReliefCopperBridge );
-
-    if( ret < 3 )
-        return false;
-
-    ret = fprintf( aFile,
-                   "ZSmoothing %d %d\n",
-                   cornerSmoothingType, cornerRadius );
-
-    if( ret < 2 )
-        return false;
-
-    // Save the corner list
-    for( item_pos = 0; item_pos < corners_count; item_pos++ )
-    {
-        ret = fprintf( aFile, "ZCorner %d %d %d\n",
-                       m_Poly->corner[item_pos].x, m_Poly->corner[item_pos].y,
-                       m_Poly->corner[item_pos].end_contour );
-
-        if( ret < 3 )
-            return false;
-    }
-
-    // Save the PolysList
-    if( m_FilledPolysList.size() )
-    {
-        fprintf( aFile, "$POLYSCORNERS\n" );
-
-        for( unsigned ii = 0; ii < m_FilledPolysList.size(); ii++ )
-        {
-            const CPolyPt* corner = &m_FilledPolysList[ii];
-            ret = fprintf( aFile,
-                           "%d %d %d %d\n",
-                           corner->x,
-                           corner->y,
-                           corner->end_contour,
-                           corner->utility );
-
-            if( ret < 4 )
-                return false;
-        }
-
-        fprintf( aFile, "$endPOLYSCORNERS\n" );
-    }
-
-    // Save the filling segments list
-    if( m_FillSegmList.size() )
-    {
-        fprintf( aFile, "$FILLSEGMENTS\n" );
-
-        for( unsigned ii = 0; ii < m_FillSegmList.size(); ii++ )
-        {
-            ret = fprintf( aFile, "%d %d %d %d\n",
-                           m_FillSegmList[ii].m_Start.x, m_FillSegmList[ii].m_Start.y,
-                           m_FillSegmList[ii].m_End.x, m_FillSegmList[ii].m_End.y );
-
-            if( ret < 4 )
-                return false;
-        }
-
-        fprintf( aFile, "$endFILLSEGMENTS\n" );
-    }
-
-    fprintf( aFile, "$endCZONE_OUTLINE\n" );
-
-    return true;
-}
-
-
-bool NETCLASSES::Save( FILE* aFile ) const
-{
-    bool result;
-
-    // save the default first.
-    result = m_Default.Save( aFile );
-
-    if( result )
-    {
-        // the rest will be alphabetical in the *.brd file.
-        for( const_iterator i = begin();  i!=end();  ++i )
-        {
-            NETCLASS*   netclass = i->second;
-
-            result = netclass->Save( aFile );
-            if( !result )
-                break;
-        }
-    }
-
-    return result;
-}
-
-
-bool NETCLASS::Save( FILE* aFile ) const
-{
-    bool result = true;
-
-    fprintf( aFile, "$NCLASS\n" );
-    fprintf( aFile, "Name %s\n",        EscapedUTF8( m_Name ).c_str() );
-    fprintf( aFile, "Desc %s\n",        EscapedUTF8( GetDescription() ).c_str() );
-
-    // Write parameters
-
-    fprintf( aFile, "Clearance %d\n",       GetClearance() );
-    fprintf( aFile, "TrackWidth %d\n",      GetTrackWidth() );
-
-    fprintf( aFile, "ViaDia %d\n",          GetViaDiameter() );
-    fprintf( aFile, "ViaDrill %d\n",        GetViaDrill() );
-
-    fprintf( aFile, "uViaDia %d\n",         GetuViaDiameter() );
-    fprintf( aFile, "uViaDrill %d\n",       GetuViaDrill() );
-
-    // Write members:
-    for( const_iterator i = begin();  i!=end();  ++i )
-        fprintf( aFile, "AddNet %s\n", EscapedUTF8( *i ).c_str() );
-
-    fprintf( aFile, "$EndNCLASS\n" );
-
-    return result;
-}
-
-
-bool TEXTE_PCB::Save( FILE* aFile ) const
-{
-    if( m_Text.IsEmpty() )
-        return true;
-
-    if( fprintf( aFile, "$TEXTPCB\n" ) != sizeof("$TEXTPCB\n") - 1 )
-        return false;
-
-    const char* style = m_Italic ? "Italic" : "Normal";
-
-    wxArrayString* list = wxStringSplit( m_Text, '\n' );
-
-    for( unsigned ii = 0; ii < list->Count(); ii++ )
-    {
-        wxString txt  = list->Item( ii );
-
-        if ( ii == 0 )
-            fprintf( aFile, "Te %s\n", EscapedUTF8( txt ).c_str() );
-        else
-            fprintf( aFile, "nl %s\n", EscapedUTF8( txt ).c_str() );
-    }
-
-    delete list;
-
-    fprintf( aFile, "Po %d %d %d %d %d %g\n",
-             m_Pos.x, m_Pos.y, m_Size.x, m_Size.y, m_Thickness, GetOrientation() );
-
-    char hJustify = 'L';
-    switch( m_HJustify )
-    {
-    case GR_TEXT_HJUSTIFY_LEFT:
-        hJustify = 'L';
-        break;
-    case GR_TEXT_HJUSTIFY_CENTER:
-        hJustify = 'C';
-        break;
-    case GR_TEXT_HJUSTIFY_RIGHT:
-        hJustify = 'R';
-        break;
-    default:
-        hJustify = 'C';
-        break;
-    }
-
-    fprintf( aFile, "De %d %d %lX %s %c\n", m_Layer,
-             m_Mirror ? 0 : 1,
-             m_TimeStamp, style, hJustify );
-
-    if( fprintf( aFile, "$EndTEXTPCB\n" ) != sizeof("$EndTEXTPCB\n") - 1 )
-        return false;
-
-    return true;
-}
-
-
-/**
- * Function Save
- * writes the data structures for this object out to a FILE in "*.brd" format.
- * @param aFile The FILE to write to.
- * @return bool - true if success writing else false.
- */
-bool TEXTE_MODULE::Save( FILE* aFile ) const
-{
-    MODULE* parent = (MODULE*) GetParent();
-    int     orient = m_Orient;
-
-    // Due to the Pcbnew history, m_Orient is saved in screen value
-    // but it is handled as relative to its parent footprint
-    if( parent )
-        orient += parent->m_Orient;
-
-    int ret = fprintf( aFile, "T%d %d %d %d %d %d %d %c %c %d %c %s\n",
-                      m_Type,
-                      m_Pos0.x, m_Pos0.y,
-                      m_Size.y, m_Size.x,
-                      orient,
-                      m_Thickness,
-                      m_Mirror ? 'M' : 'N', m_NoShow ? 'I' : 'V',
-                      GetLayer(),
-                      m_Italic ? 'I' : 'N',
-                      EscapedUTF8( m_Text ).c_str()
-                      );
-
-    return ret > 20;
-}
-
-
-bool EDGE_MODULE::Save( FILE* aFile ) const
-{
-    int ret = -1;
-
-    switch( m_Shape )
-    {
-    case S_SEGMENT:
-        ret = fprintf( aFile, "DS %d %d %d %d %d %d\n",
-                       m_Start0.x, m_Start0.y,
-                       m_End0.x, m_End0.y,
-                       m_Width, m_Layer );
-        break;
-
-    case S_CIRCLE:
-        ret = fprintf( aFile, "DC %d %d %d %d %d %d\n",
-                       m_Start0.x, m_Start0.y,
-                       m_End0.x, m_End0.y,
-                       m_Width, m_Layer );
-        break;
-
-    case S_ARC:
-        ret = fprintf( aFile, "DA %d %d %d %d %g %d %d\n",
-                       m_Start0.x, m_Start0.y,
-                       m_End0.x, m_End0.y,
-                       GetAngle(),
-                       m_Width, m_Layer );
-        break;
-
-    case S_POLYGON:
-        ret = fprintf( aFile, "DP %d %d %d %d %d %d %d\n",
-                       m_Start0.x, m_Start0.y,
-                       m_End0.x, m_End0.y,
-                       (int) m_PolyPoints.size(),
-                       m_Width, m_Layer );
-
-        for( unsigned i = 0;  i<m_PolyPoints.size();  ++i )
-            fprintf( aFile, "Dl %d %d\n", m_PolyPoints[i].x, m_PolyPoints[i].y );
-
-        break;
-
-    default:
-
-        // future: throw an exception here
-#if defined(DEBUG)
-        printf( "EDGE_MODULE::Save(): unexpected m_Shape: %d\n", m_Shape );
-#endif
-        break;
-    }
-
-    return ret > 5;
-}
-
-
-bool TRACK::Save( FILE* aFile ) const
-{
-    int type = 0;
-
-    if( Type() == PCB_VIA_T )
-        type = 1;
-
-    fprintf( aFile, "Po %d %d %d %d %d %d %d\n", m_Shape,
-             m_Start.x, m_Start.y, m_End.x, m_End.y, m_Width, m_Drill );
-
-    fprintf( aFile, "De %d %d %d %lX %X\n",
-             m_Layer, type, GetNet(),
-             m_TimeStamp, GetStatus() );
-
-    return true;
-}
-
-
-bool DIMENSION::Save( FILE* aFile ) const
-{
-    bool rc = false;
-
-    // note: COTATION was the previous name of DIMENSION
-    // this old keyword is used here for compatibility
-    const char keyWordLine[] = "$COTATION\n";
-    const char keyWordLineEnd[] = "$endCOTATION\n";
-
-    if( fputs( keyWordLine, aFile ) == EOF )
-        goto out;
-
-    fprintf( aFile, "Ge %d %d %lX\n", m_Shape, m_Layer, m_TimeStamp );
-
-    fprintf( aFile, "Va %d\n", m_Value );
-
-    if( !m_Text.GetText().IsEmpty() )
-        fprintf( aFile, "Te %s\n", EscapedUTF8( m_Text.GetText() ).c_str() );
-    else
-        fprintf( aFile, "Te \"?\"\n" );
-
-    fprintf( aFile, "Po %d %d %d %d %d %g %d\n",
-             m_Text.m_Pos.x, m_Text.m_Pos.y,
-             m_Text.m_Size.x, m_Text.m_Size.y,
-             m_Text.GetThickness(), m_Text.GetOrientation(),
-             m_Text.m_Mirror ? 0 : 1 );
-
-    fprintf( aFile, "Sb %d %d %d %d %d %d\n", S_SEGMENT,
-             m_crossBarOx, m_crossBarOy,
-             m_crossBarFx, m_crossBarFy, m_Width );
-
-    fprintf( aFile, "Sd %d %d %d %d %d %d\n", S_SEGMENT,
-             m_featureLineDOx, m_featureLineDOy,
-             m_featureLineDFx, m_featureLineDFy, m_Width );
-
-    fprintf( aFile, "Sg %d %d %d %d %d %d\n", S_SEGMENT,
-             m_featureLineGOx, m_featureLineGOy,
-             m_featureLineGFx, m_featureLineGFy, m_Width );
-
-    fprintf( aFile, "S1 %d %d %d %d %d %d\n", S_SEGMENT,
-             m_arrowD1Ox, m_arrowD1Oy,
-             m_arrowD1Fx, m_arrowD1Fy, m_Width );
-
-    fprintf( aFile, "S2 %d %d %d %d %d %d\n", S_SEGMENT,
-             m_arrowD2Ox, m_arrowD2Oy,
-             m_arrowD2Fx, m_arrowD2Fy, m_Width );
-
-
-    fprintf( aFile, "S3 %d %d %d %d %d %d\n", S_SEGMENT,
-             m_arrowG1Ox, m_arrowG1Oy,
-             m_arrowG1Fx, m_arrowG1Fy, m_Width );
-
-    fprintf( aFile, "S4 %d %d %d %d %d %d\n", S_SEGMENT,
-             m_arrowG2Ox, m_arrowG2Oy,
-             m_arrowG2Fx, m_arrowG2Fy, m_Width );
-
-    if( fputs( keyWordLineEnd, aFile ) == EOF )
-        goto out;
-
-    rc = true;
-
-out:
-    return rc;
-}
-
-
-bool D_PAD::Save( FILE* aFile ) const
-{
-    int         cshape;
-    const char* texttype;
-
-    // check the return values for first and last fprints() in this function
-    if( fprintf( aFile, "$PAD\n" ) != sizeof("$PAD\n") - 1 )
-        return false;
-
-    switch( m_PadShape )
-    {
-    case PAD_CIRCLE:
-        cshape = 'C'; break;
-
-    case PAD_RECT:
-        cshape = 'R'; break;
-
-    case PAD_OVAL:
-        cshape = 'O'; break;
-
-    case PAD_TRAPEZOID:
-        cshape = 'T'; break;
-
-    default:
-        cshape = 'C';
-        DisplayError( NULL, _( "Unknown pad shape" ) );
-        break;
-    }
-
-    fprintf( aFile, "Sh \"%.4s\" %c %d %d %d %d %g\n",
-             m_Padname, cshape, m_Size.x, m_Size.y,
-             m_DeltaSize.x, m_DeltaSize.y, m_Orient );
-
-    fprintf( aFile, "Dr %d %d %d", m_Drill.x, m_Offset.x, m_Offset.y );
-
-    if( m_DrillShape == PAD_OVAL )
-    {
-        fprintf( aFile, " %c %d %d", 'O', m_Drill.x, m_Drill.y );
-    }
-
-    fprintf( aFile, "\n" );
-
-    switch( GetAttribute() )
-    {
-    case PAD_STANDARD:
-        texttype = "STD"; break;
-
-    case PAD_SMD:
-        texttype = "SMD"; break;
-
-    case PAD_CONN:
-        texttype = "CONN"; break;
-
-    case PAD_HOLE_NOT_PLATED:
-        texttype = "HOLE"; break;
-
-    default:
-        texttype = "STD";
-        DisplayError( NULL, wxT( "Invalid Pad attribute" ) );
-        break;
-    }
-
-    fprintf( aFile, "At %s N %8.8X\n", texttype, m_layerMask );
-
-    fprintf( aFile, "Ne %d %s\n", GetNet(), EscapedUTF8( m_Netname ).c_str() );
-
-    fprintf( aFile, "Po %d %d\n", m_Pos0.x, m_Pos0.y );
-
-    if( GetDieLength() != 0 )
-        fprintf( aFile, "Le %d\n", GetDieLength() );
-
-    if( GetLocalSolderMaskMargin() != 0 )
-        fprintf( aFile, ".SolderMask %d\n", GetLocalSolderMaskMargin() );
-
-    if( GetLocalSolderPasteMargin() != 0 )
-        fprintf( aFile, ".SolderPaste %d\n", GetLocalSolderPasteMargin() );
-
-    if( GetLocalSolderPasteMarginRatio() != 0 )
-        fprintf( aFile, ".SolderPasteRatio %g\n", GetLocalSolderPasteMarginRatio() );
-
-    if( GetLocalClearance() != 0 )
-        fprintf( aFile, ".LocalClearance %d\n", GetLocalClearance() );
-
-    if( m_ZoneConnection != UNDEFINED_CONNECTION )
-        fprintf( aFile, ".ZoneConnection %d\n", m_ZoneConnection );
-
-    if( m_ThermalWidth != 0 )
-        fprintf( aFile, ".ThermalWidth %d\n", m_ThermalWidth );
-
-    if( m_ThermalGap != 0 )
-        fprintf( aFile, ".ThermalGap %d\n", m_ThermalGap );
-
-    if( fprintf( aFile, "$EndPAD\n" ) != sizeof("$EndPAD\n") - 1 )
-        return false;
-
-    return true;
-}
-
-
-bool MODULE::Save( FILE* aFile ) const
-{
-    char        statusTxt[8];
-    BOARD_ITEM* item;
-
-    bool rc = false;
-
-    fprintf( aFile, "$MODULE %s\n", TO_UTF8( m_LibRef ) );
-
-    memset( statusTxt, 0, sizeof(statusTxt) );
-    if( IsLocked() )
-        statusTxt[0] = 'F';
-    else
-        statusTxt[0] = '~';
-
-    if( m_ModuleStatus & MODULE_is_PLACED )
-        statusTxt[1] = 'P';
-    else
-        statusTxt[1] = '~';
-
-    fprintf( aFile, "Po %d %d %g %d %8.8lX %8.8lX %s\n",
-             m_Pos.x, m_Pos.y,
-             GetOrientation(), m_Layer, m_LastEdit_Time,
-             m_TimeStamp, statusTxt );
-
-    fprintf( aFile, "Li %s\n", TO_UTF8( m_LibRef ) );
-
-    if( !m_Doc.IsEmpty() )
-    {
-        fprintf( aFile, "Cd %s\n", TO_UTF8( m_Doc ) );
-    }
-
-    if( !m_KeyWord.IsEmpty() )
-    {
-        fprintf( aFile, "Kw %s\n", TO_UTF8( m_KeyWord ) );
-    }
-
-    fprintf( aFile, "Sc %8.8lX\n", m_TimeStamp );
-    fprintf( aFile, "AR %s\n", TO_UTF8( m_Path ) );
-    fprintf( aFile, "Op %X %X 0\n", m_CntRot90, m_CntRot180 );
-
-    if( GetLocalSolderMaskMargin() != 0 )
-        fprintf( aFile, ".SolderMask %d\n", GetLocalSolderMaskMargin() );
-
-    if( m_LocalSolderPasteMargin != 0 )
-        fprintf( aFile, ".SolderPaste %d\n", GetLocalSolderPasteMargin() );
-
-    if( GetLocalSolderPasteMarginRatio() != 0 )
-        fprintf( aFile, ".SolderPasteRatio %g\n", GetLocalSolderPasteMarginRatio() );
-
-    if( m_LocalClearance != 0 )
-        fprintf( aFile, ".LocalClearance %d\n", GetLocalClearance() );
-
-    if( m_ZoneConnection != UNDEFINED_CONNECTION )
-        fprintf( aFile, ".ZoneConnection %d\n", m_ZoneConnection );
-
-    if( m_ThermalWidth != 0 )
-        fprintf( aFile, ".ThermalWidth %d\n", m_ThermalWidth );
-
-    if( m_ThermalGap != 0 )
-        fprintf( aFile, ".ThermalGap %d\n", m_ThermalGap );
-
-    // attributes
-    if( m_Attributs != MOD_DEFAULT )
-    {
-        fprintf( aFile, "At " );
-
-        if( m_Attributs & MOD_CMS )
-            fprintf( aFile, "SMD " );
-
-        if( m_Attributs & MOD_VIRTUAL )
-            fprintf( aFile, "VIRTUAL " );
-
-        fprintf( aFile, "\n" );
-    }
-
-    // save reference
-    if( !m_Reference->Save( aFile ) )
-        goto out;
-
-    // save value
-    if( !m_Value->Save( aFile ) )
-        goto out;
-
-    // save drawing elements
-    for( item = m_Drawings;  item;  item = item->Next() )
-    {
-        switch( item->Type() )
-        {
-        case PCB_MODULE_TEXT_T:
-        case PCB_MODULE_EDGE_T:
-            if( !item->Save( aFile ) )
-                goto out;
-
-            break;
-
-        default:
-#if defined(DEBUG)
-            printf( "MODULE::Save() ignoring type %d\n", item->Type() );
-#endif
-            break;
-        }
-    }
-
-    // save the pads
-    for( item = m_Pads;  item;  item = item->Next() )
-        if( !item->Save( aFile ) )
-            goto out;
-
-    Write_3D_Descr( aFile );
-
-    fprintf( aFile, "$EndMODULE  %s\n", TO_UTF8( m_LibRef ) );
-
-    rc = true;
-out:
-    return rc;
-}
-
-/* Save the description of 3D MODULE
- */
-int MODULE::Write_3D_Descr( FILE* File ) const
-{
-    char buf[512];
-
-    for( S3D_MASTER* t3D = m_3D_Drawings;  t3D;  t3D = t3D->Next() )
-    {
-        if( !t3D->m_Shape3DName.IsEmpty() )
-        {
-            fprintf( File, "$SHAPE3D\n" );
-
-            fprintf( File, "Na %s\n", EscapedUTF8( t3D->m_Shape3DName ).c_str() );
-
-            sprintf( buf, "Sc %lf %lf %lf\n",
-                     t3D->m_MatScale.x,
-                     t3D->m_MatScale.y,
-                     t3D->m_MatScale.z );
-            fprintf( File, "%s", to_point( buf ) );
-
-            sprintf( buf, "Of %lf %lf %lf\n",
-                     t3D->m_MatPosition.x,
-                     t3D->m_MatPosition.y,
-                     t3D->m_MatPosition.z );
-            fprintf( File, "%s", to_point( buf ) );
-
-            sprintf( buf, "Ro %lf %lf %lf\n",
-                     t3D->m_MatRotation.x,
-                     t3D->m_MatRotation.y,
-                     t3D->m_MatRotation.z );
-            fprintf( File, "%s", to_point( buf ) );
-
-            fprintf( File, "$EndSHAPE3D\n" );
-        }
-    }
-
-    return 0;
-}
-
-#endif  // USE_NEW_PCBNEW_SAVE
-
-
-#if 1 || !defined(USE_NEW_PCBNEW_LOAD)
-
-/* Read pad from file.
- * The 1st line of descr ($PAD) is assumed to be already read
- * Syntax:
- * $PAD
- * Sh "N1" C 550 550 0 0 1800
- * Dr 310 0 0
- * At STD N 00C0FFFF
- * Do 3 "netname"
- * Po 6000 -6000
- * $EndPAD
- */
-int D_PAD::ReadDescr( LINE_READER* aReader )
-{
-    char*   Line;
-    char    BufLine[1024], BufCar[256];
-    char*   PtLine;
-    int     nn, ll, dx, dy;
-
-    while( aReader->ReadLine() )
-    {
-        Line = aReader->Line();
-
-        if( Line[0] == '$' )
-            return 0;
-
-        PtLine = Line + 3;
-
-        /* Decode the first code and read the corresponding data
-         */
-        switch( Line[0] )
-        {
-        case 'S': // = Sh
-            // Read pad name
-            nn = 0;
-
-            while( (*PtLine != '"') && *PtLine )
-                PtLine++;
-
-            if( *PtLine )
-                PtLine++;
-
-            memset( m_Padname, 0, sizeof(m_Padname) );
-
-            while( (*PtLine != '"') && *PtLine )
-            {
-                if( nn < (int) sizeof(m_Padname) )
-                {
-                    if( *PtLine > ' ' )
-                    {
-                        m_Padname[nn] = *PtLine; nn++;
-                    }
-                }
-                PtLine++;
-            }
-
-            if( *PtLine == '"' )
-                PtLine++;
-
-            nn = sscanf( PtLine, " %s %d %d %d %d %lf",
-                         BufCar, &m_Size.x, &m_Size.y,
-                         &m_DeltaSize.x, &m_DeltaSize.y,
-                         &m_Orient );
-
-            ll = 0xFF & BufCar[0];
-
-            // Read pad shape
-            PAD_SHAPE_T shape;
-
-            switch( ll )
-            {
-            default:
-            case 'C':   shape = PAD_CIRCLE;     break;
-            case 'R':   shape = PAD_RECT;       break;
-            case 'O':   shape = PAD_OVAL;       break;
-            case 'T':   shape = PAD_TRAPEZOID;  break;
-            }
-
-            SetShape( shape );  // sets m_boundingRadius = -1
-            break;
-
-        case 'D':
-            BufCar[0] = 0;
-            nn = sscanf( PtLine, "%d %d %d %s %d %d", &m_Drill.x,
-                         &m_Offset.x, &m_Offset.y, BufCar, &dx, &dy );
-            m_Drill.y    = m_Drill.x;
-            m_DrillShape = PAD_CIRCLE;
-
-            if( nn >= 6 )       // Drill shape = OVAL ?
-            {
-                if( BufCar[0] == 'O' )
-                {
-                    m_Drill.x = dx;
-                    m_Drill.y = dy;
-
-                    m_DrillShape = PAD_OVAL;
-                }
-            }
-
-            break;
-
-        case 'A':
-            nn = sscanf( PtLine, "%s %s %X", BufLine, BufCar,
-                         &m_layerMask );
-
-            // BufCar is not used now update attributes
-            SetAttribute( PAD_STANDARD );
-            if( strncmp( BufLine, "SMD", 3 ) == 0 )
-                SetAttribute( PAD_SMD );
-
-            if( strncmp( BufLine, "CONN", 4 ) == 0 )
-                SetAttribute( PAD_CONN );
-
-            if( strncmp( BufLine, "HOLE", 4 ) == 0 )
-                SetAttribute( PAD_HOLE_NOT_PLATED );
-
-            break;
-
-        case 'N':       // Read Netname
-            int netcode;
-            nn = sscanf( PtLine, "%d", &netcode );
-            SetNet( netcode );
-
-            // read Netname
-            ReadDelimitedText( BufLine, PtLine, sizeof(BufLine) );
-            SetNetname( FROM_UTF8( StrPurge( BufLine ) ) );
-        break;
-
-        case 'P':
-            nn    = sscanf( PtLine, "%d %d", &m_Pos0.x, &m_Pos0.y );
-            m_Pos = m_Pos0;
-            break;
-
-        case 'L':
-            int lengthdie;
-            nn    = sscanf( PtLine, "%d", &lengthdie );
-            SetDieLength( lengthdie );
-            break;
-
-        case '.':    // Read specific data
-            if( strnicmp( Line, ".SolderMask ", 12 ) == 0 )
-                SetLocalSolderMaskMargin( atoi( Line + 12 ) );
-            else if( strnicmp( Line, ".SolderPaste ", 13 )  == 0 )
-                SetLocalSolderPasteMargin( atoi( Line + 13 ) );
-            else if( strnicmp( Line, ".SolderPasteRatio ", 18 ) == 0 )
-                SetLocalSolderPasteMarginRatio( atoi( Line + 18 ) );
-            else if( strnicmp( Line, ".LocalClearance ", 16 ) == 0 )
-                SetLocalClearance( atoi( Line + 16 ) );
-            else if( strnicmp( Line, ".ZoneConnection ", 16 ) == 0 )
-                m_ZoneConnection = (ZoneConnection)atoi( Line + 16 );
-            else if( strnicmp( Line, ".ThermalWidth ", 14 ) == 0 )
-                m_ThermalWidth = atoi( Line + 14 );
-            else if( strnicmp( Line, ".ThermalGap ", 12 ) == 0 )
-                m_ThermalGap = atoi( Line + 12 );
-            break;
-
-        default:
-            DisplayError( NULL, wxT( "Err Pad: Id inconnu" ) );
-            return 1;
-        }
-    }
-
-    return 2;   // error : EOF
-}
-
-
-/* Read 3D module from file. (Ascii)
- * The 1st line of descr ($MODULE) is assumed to be already read
- * Returns 0 if OK
- */
-int MODULE::Read_3D_Descr( LINE_READER* aReader )
-{
-    char*       Line = aReader->Line();
-    char*       text = Line + 3;
-
-    S3D_MASTER* t3D = m_3D_Drawings;
-
-    if( !t3D->m_Shape3DName.IsEmpty() )
-    {
-        S3D_MASTER* n3D = new S3D_MASTER( this );
-
-        m_3D_Drawings.PushBack( n3D );
-
-        t3D = n3D;
-    }
-
-    while( aReader->ReadLine() )
-    {
-        Line = aReader->Line();
-
-        switch( Line[0] )
-        {
-        case '$':
-            if( Line[1] == 'E' )
-                return 0;
-
-            return 1;
-
-        case 'N':       // Shape File Name
-        {
-            char buf[512];
-            ReadDelimitedText( buf, text, 512 );
-            t3D->m_Shape3DName = FROM_UTF8( buf );
-            break;
-        }
-
-        case 'S':       // Scale
-            sscanf( text, "%lf %lf %lf\n",
-                    &t3D->m_MatScale.x,
-                    &t3D->m_MatScale.y,
-                    &t3D->m_MatScale.z );
-            break;
-
-        case 'O':       // Offset
-            sscanf( text, "%lf %lf %lf\n",
-                    &t3D->m_MatPosition.x,
-                    &t3D->m_MatPosition.y,
-                    &t3D->m_MatPosition.z );
-            break;
-
-        case 'R':       // Rotation
-            sscanf( text, "%lf %lf %lf\n",
-                    &t3D->m_MatRotation.x,
-                    &t3D->m_MatRotation.y,
-                    &t3D->m_MatRotation.z );
-            break;
-
-        default:
-            break;
-        }
-    }
-
-    return 1;
-}
-
-
-/* Read a MODULE description
- *  The first description line ($MODULE) is already read
- *  @return 0 if no error
- */
-int MODULE::ReadDescr( LINE_READER* aReader )
-{
-    char* Line;
-    char  BufLine[256], BufCar1[128], * PtLine;
-    int   itmp1, itmp2;
-
-    while( aReader->ReadLine() )
-    {
-        Line = aReader->Line();
-        if( Line[0] == '$' )
-        {
-            if( Line[1] == 'E' )
-                break;
-
-            if( Line[1] == 'P' )
-            {
-                D_PAD* pad = new D_PAD( this );
-
-                pad->ReadDescr( aReader );
-
-                wxPoint padpos = pad->GetPosition();
-
-                RotatePoint( &padpos, m_Orient );
-
-                pad->SetPosition( padpos + m_Pos );
-
-                m_Pads.PushBack( pad );
-                continue;
-            }
-
-            if( Line[1] == 'S' )
-                Read_3D_Descr( aReader );
-        }
-
-        if( strlen( Line ) < 4 )
-            continue;
-
-        PtLine = Line + 3;
-
-        /* Decode the first code of the current line and read the
-         * corresponding data
-         */
-        switch( Line[0] )
-        {
-        case 'P':
-            double orientation;
-            memset( BufCar1, 0, sizeof(BufCar1) );
-            sscanf( PtLine, "%d %d %lf %d %lX %lX %s",
-                    &m_Pos.x, &m_Pos.y,
-                    &orientation, &m_Layer,
-                    &m_LastEdit_Time, &m_TimeStamp, BufCar1 );
-
-            SetOrientation( orientation );
-
-            m_ModuleStatus = 0;
-
-            if( BufCar1[0] == 'F' )
-                SetLocked( true );
-
-            if( BufCar1[1] == 'P' )
-                m_ModuleStatus |= MODULE_is_PLACED;
-
-            break;
-
-        case 'L':       // Li = read the library name of the footprint
-            *BufLine = 0;
-            sscanf( PtLine, " %s", BufLine );
-            m_LibRef = FROM_UTF8( BufLine );
-            break;
-
-        case 'S':
-            sscanf( PtLine, " %lX", &m_TimeStamp );
-            break;
-
-
-        case 'O':       // (Op)tions for auto placement
-            itmp1 = itmp2 = 0;
-            sscanf( PtLine, " %X %X", &itmp1, &itmp2 );
-
-            m_CntRot180 = itmp2 & 0x0F;
-
-            if( m_CntRot180 > 10 )
-                m_CntRot180 = 10;
-
-            m_CntRot90 = itmp1 & 0x0F;
-
-            if( m_CntRot90 > 10 )
-                m_CntRot90 = 0;
-
-            itmp1 = (itmp1 >> 4) & 0x0F;
-
-            if( itmp1 > 10 )
-                itmp1 = 0;
-
-            m_CntRot90 |= itmp1 << 4;
-            break;
-
-        case 'A':
-            if( Line[1] == 't' )
-            {
-                // At = (At)tributes of module
-                if( strstr( PtLine, "SMD" ) )
-                    m_Attributs |= MOD_CMS;
-
-                if( strstr( PtLine, "VIRTUAL" ) )
-                    m_Attributs |= MOD_VIRTUAL;
-            }
-
-            if( Line[1] == 'R' )
-            {
-                // alternate reference, e.g. /478C2408/478AD1B6
-                sscanf( PtLine, " %s", BufLine );
-                m_Path = FROM_UTF8( BufLine );
-            }
-
-            break;
-
-        case 'T':    /* Read a footprint text description (ref, value, or
-                      * drawing */
-            TEXTE_MODULE * textm;
-            sscanf( Line + 1, "%d", &itmp1 );
-
-            if( itmp1 == TEXT_is_REFERENCE )
-                textm = m_Reference;
-            else if( itmp1 == TEXT_is_VALUE )
-                textm = m_Value;
-            else        // text is a drawing
-            {
-                textm = new TEXTE_MODULE( this );
-                m_Drawings.PushBack( textm );
-            }
-            textm->ReadDescr( aReader );
-            break;
-
-        case 'D':    // read a drawing item
-            EDGE_MODULE * edge;
-            edge = new EDGE_MODULE( this );
-            m_Drawings.PushBack( edge );
-            edge->ReadDescr( aReader );
-            edge->SetDrawCoord();
-            break;
-
-        case 'C':    // read documentation data
-            m_Doc = FROM_UTF8( StrPurge( PtLine ) );
-            break;
-
-        case 'K':    // Read key words
-            m_KeyWord = FROM_UTF8( StrPurge( PtLine ) );
-            break;
-
-        case '.':    // Read specific data
-            if( strnicmp( Line, ".SolderMask ", 12 ) == 0 )
-                SetLocalSolderMaskMargin( atoi( Line + 12 ) );
-            else if( strnicmp( Line, ".SolderPaste ", 13 )  == 0 )
-                SetLocalSolderPasteMargin( atoi( Line + 13 ) );
-            else if( strnicmp( Line, ".SolderPasteRatio ", 18 ) == 0 )
-                SetLocalSolderPasteMarginRatio( atof( Line + 18 ) );
-            else if( strnicmp( Line, ".LocalClearance ", 16 ) == 0 )
-                SetLocalClearance( atoi( Line + 16 ) );
-            else if( strnicmp( Line, ".ZoneConnection ", 16 ) == 0 )
-                m_ZoneConnection = (ZoneConnection)atoi( Line + 16 );
-            else if( strnicmp( Line, ".ThermalWidth ", 14 ) == 0 )
-                m_ThermalWidth = atoi( Line + 14 );
-            else if( strnicmp( Line, ".ThermalGap ", 12 ) == 0 )
-                m_ThermalGap = atoi( Line + 12 );
-            break;
-
-        default:
-            break;
-        }
-    }
-
-    // Recalculate the bounding box
-    CalculateBoundingBox();
-    return 0;
-}
-
-
-/* Read a description line like:
- *  DS 2600 0 2600 -600 120 21
- *  this description line is in Line
- *  EDGE_MODULE type can be:
- *  - Circle,
- *  - Segment (line)
- *  - Arc
- *  - Polygon
- *
- */
-int EDGE_MODULE::ReadDescr( LINE_READER* aReader )
-{
-    int  ii;
-    int  error = 0;
-    char* Buf;
-    char* Line;
-
-    Line = aReader->Line();
-
-    switch( Line[1] )
-    {
-    case 'S':
-        m_Shape = S_SEGMENT;
-        break;
-
-    case 'C':
-        m_Shape = S_CIRCLE;
-        break;
-
-    case 'A':
-        m_Shape = S_ARC;
-        break;
-
-    case 'P':
-        m_Shape = S_POLYGON;
-        break;
-
-    default:
-        wxString msg;
-        msg.Printf( wxT( "Unknown EDGE_MODULE type <%s>" ), Line );
-        DisplayError( NULL, msg );
-        error = 1;
-        break;
-    }
-
-    switch( m_Shape )
-    {
-    case S_ARC:
-        double angle;
-        sscanf( Line + 3, "%d %d %d %d %lf %d %d",
-                &m_Start0.x, &m_Start0.y,
-                &m_End0.x, &m_End0.y,
-                &angle, &m_Width, &m_Layer );
-
-        NORMALIZE_ANGLE_360( angle );
-        SetAngle( angle );
-        break;
-
-    case S_SEGMENT:
-    case S_CIRCLE:
-        sscanf( Line + 3, "%d %d %d %d %d %d",
-                &m_Start0.x, &m_Start0.y,
-                &m_End0.x, &m_End0.y,
-                &m_Width, &m_Layer );
-        break;
-
-    case S_POLYGON:
-        int pointCount;
-        sscanf( Line + 3, "%d %d %d %d %d %d %d",
-                &m_Start0.x, &m_Start0.y,
-                &m_End0.x, &m_End0.y,
-                &pointCount, &m_Width, &m_Layer );
-
-        m_PolyPoints.clear();
-        m_PolyPoints.reserve( pointCount );
-
-        for( ii = 0;  ii<pointCount;  ii++ )
-        {
-            if( aReader->ReadLine() )
-            {
-                Buf = aReader->Line();
-
-                if( strncmp( Buf, "Dl", 2 ) != 0 )
-                {
-                    error = 1;
-                    break;
-                }
-
-                int x;
-                int y;
-                sscanf( Buf + 3, "%d %d\n", &x, &y );
-
-                m_PolyPoints.push_back( wxPoint( x, y ) );
-            }
-            else
-            {
-                error = 1;
-                break;
-            }
-        }
-
-        break;
-
-    default:
-        sscanf( Line + 3, "%d %d %d %d %d %d",
-                &m_Start0.x, &m_Start0.y,
-                &m_End0.x, &m_End0.y,
-                &m_Width, &m_Layer );
-        break;
-    }
-
-    // Check for a reasonable width:
-    if( m_Width <= 1 )
-        m_Width = 1;
-
-    if( m_Width > MAX_WIDTH )
-        m_Width = MAX_WIDTH;
-
-    // Check for a reasonable layer:
-    // m_Layer must be >= FIRST_NON_COPPER_LAYER, but because microwave footprints
-    // can use the copper layers m_Layer < FIRST_NON_COPPER_LAYER is allowed.
-    // @todo: changes use of EDGE_MODULE these footprints and allows only
-    // m_Layer >= FIRST_NON_COPPER_LAYER
-    if( (m_Layer < 0) || (m_Layer > LAST_NON_COPPER_LAYER) )
-        m_Layer = SILKSCREEN_N_FRONT;
-
-    return error;
-}
-
-
-bool DIMENSION::ReadDimensionDescr( LINE_READER* aReader )
-{
-    char* Line;
-    char  Text[2048];
-
-    while( aReader->ReadLine() )
-    {
-        Line = aReader->Line();
-
-        if( strnicmp( Line, "$EndDIMENSION", 4 ) == 0 )
-            return true;
-
-        if( Line[0] == 'V' )
-        {
-            sscanf( Line + 2, " %d", &m_Value );
-            continue;
-        }
-
-        if( Line[0] == 'G' )
-        {
-            int layer;
-
-            sscanf( Line + 2, " %d %d %lX", &m_Shape, &layer, &m_TimeStamp );
-
-            if( layer < FIRST_NO_COPPER_LAYER )
-                layer = FIRST_NO_COPPER_LAYER;
-
-            if( layer > LAST_NO_COPPER_LAYER )
-                layer = LAST_NO_COPPER_LAYER;
-
-            SetLayer( layer );
-            m_Text.SetLayer( layer );
-            continue;
-        }
-
-        if( Line[0] == 'T' )
-        {
-            ReadDelimitedText( Text, Line + 2, sizeof(Text) );
-            m_Text.m_Text = FROM_UTF8( Text );
-            continue;
-        }
-
-        if( Line[0] == 'P' )
-        {
-            int normal_display = 1;
-            int orientation;
-            int thickness;
-            sscanf( Line + 2, " %d %d %d %d %d %d %d",
-                    &m_Text.m_Pos.x, &m_Text.m_Pos.y,
-                    &m_Text.m_Size.x, &m_Text.m_Size.y,
-                    &thickness, &orientation,
-                    &normal_display );
-
-            m_Text.m_Mirror = normal_display ? false : true;
-            m_Pos = m_Text.m_Pos;
-            m_Text.SetOrientation( orientation );
-            m_Text.SetThickness( thickness );
-            continue;
-        }
-
-        if( Line[0] == 'S' )
-        {
-            switch( Line[1] )
-            {
-                int Dummy;
-
-            case 'b':
-                sscanf( Line + 2, " %d %d %d %d %d %d",
-                        &Dummy,
-                        &m_crossBarOx, &m_crossBarOy,
-                        &m_crossBarFx, &m_crossBarFy,
-                        &m_Width );
-                break;
-
-            case 'd':
-                sscanf( Line + 2, " %d %d %d %d %d %d",
-                        &Dummy,
-                        &m_featureLineDOx, &m_featureLineDOy,
-                        &m_featureLineDFx, &m_featureLineDFy,
-                        &Dummy );
-                break;
-
-            case 'g':
-                sscanf( Line + 2, " %d %d %d %d %d %d",
-                        &Dummy,
-                        &m_featureLineGOx, &m_featureLineGOy,
-                        &m_featureLineGFx, &m_featureLineGFy,
-                        &Dummy );
-                break;
-
-            case '1':
-                sscanf( Line + 2, " %d %d %d %d %d %d",
-                        &Dummy,
-                        &m_arrowD1Ox, &m_arrowD1Oy,
-                        &m_arrowD1Fx, &m_arrowD1Fy,
-                        &Dummy );
-                break;
-
-            case '2':
-                sscanf( Line + 2, " %d %d %d %d %d %d",
-                        &Dummy,
-                        &m_arrowD2Ox, &m_arrowD2Oy,
-                        &m_arrowD2Fx, &m_arrowD2Fy,
-                        &Dummy );
-                break;
-
-            case '3':
-                sscanf( Line + 2, " %d %d %d %d %d %d\n",
-                        &Dummy,
-                        &m_arrowG1Ox, &m_arrowG1Oy,
-                        &m_arrowG1Fx, &m_arrowG1Fy,
-                        &Dummy );
-                break;
-
-            case '4':
-                sscanf( Line + 2, " %d %d %d %d %d %d",
-                        &Dummy,
-                        &m_arrowG2Ox, &m_arrowG2Oy,
-                        &m_arrowG2Fx, &m_arrowG2Fy,
-                        &Dummy );
-                break;
-            }
-
-            continue;
-        }
-    }
-
-    return false;
-}
-
-
-bool DRAWSEGMENT::ReadDrawSegmentDescr( LINE_READER* aReader )
-{
-    char* Line;
-
-    while( aReader->ReadLine() )
-    {
-        Line = aReader->Line();
-
-        if( strnicmp( Line, "$End", 4 ) == 0 )
-            return true; // End of description
-
-        if( Line[0] == 'P' )
-        {
-            sscanf( Line + 2, " %d %d %d %d %d %d",
-                    &m_Shape, &m_Start.x, &m_Start.y,
-                    &m_End.x, &m_End.y, &m_Width );
-
-            if( m_Width < 0 )
-                m_Width = 0;
-        }
-
-        if( Line[0] == 'D' )
-        {
-            int status;
-            char* token = 0;
-
-            token = strtok( Line," " );
-
-            for( int i = 0; (token = strtok( NULL," " )) != NULL; i++ )
-            {
-                switch( i )
-                {
-                case 0:
-                    sscanf( token,"%d",&m_Layer );
-                    break;
-                case 1:
-                    sscanf( token,"%d",&m_Type );
-                    break;
-                case 2:
-                    double angle;
-                    sscanf( token, "%lf", &angle );
-                    SetAngle( angle );
-                    break;
-                case 3:
-                    sscanf( token,"%lX",&m_TimeStamp );
-                    break;
-                case 4:
-                    sscanf( token,"%X",&status );
-                    break;
-                    // Bezier Control Points
-                case 5:
-                    sscanf( token,"%d",&m_BezierC1.x );
-                    break;
-                case 6:
-                    sscanf( token,"%d",&m_BezierC1.y );
-                    break;
-                case 7:
-                    sscanf( token,"%d",&m_BezierC2.x );
-                    break;
-                case 8:
-                    sscanf( token,"%d",&m_BezierC2.y );
-                    break;
-                default:
-                    break;
-                }
-            }
-
-            if( m_Layer < FIRST_NO_COPPER_LAYER )
-                m_Layer = FIRST_NO_COPPER_LAYER;
-
-            if( m_Layer > LAST_NO_COPPER_LAYER )
-                m_Layer = LAST_NO_COPPER_LAYER;
-
-            SetState( status, ON );
-        }
-    }
-
-    return false;
-}
-
-
-/* Read NETINFO_ITEM from file.
- * Returns 0 if OK
- * 1 if incomplete reading
- */
-int NETINFO_ITEM::ReadDescr( LINE_READER* aReader )
-{
-    char* Line;
-    char  Ltmp[1024];
-    int   tmp;
-
-    while( aReader->ReadLine() )
-    {
-        Line = aReader->Line();
-        if( strnicmp( Line, "$End", 4 ) == 0 )
-            return 0;
-
-        if( strncmp( Line, "Na", 2 ) == 0 )
-        {
-            sscanf( Line + 2, " %d", &tmp );
-            SetNet( tmp );
-
-            ReadDelimitedText( Ltmp, Line + 2, sizeof(Ltmp) );
-            m_Netname = FROM_UTF8( Ltmp );
-            continue;
-        }
-    }
-
-    return 1;
-}
-
-
-/* Read the description from the PCB file.
- */
-bool PCB_TARGET::ReadMirePcbDescr( LINE_READER* aReader )
-{
-    char* Line;
-
-    while( aReader->ReadLine() )
-    {
-        Line = aReader->Line();
-
-        if( strnicmp( Line, "$End", 4 ) == 0 )
-            return true;
-
-        if( Line[0] == 'P' )
-        {
-            sscanf( Line + 2, " %X %d %d %d %d %d %lX",
-                    &m_Shape, &m_Layer,
-                    &m_Pos.x, &m_Pos.y,
-                    &m_Size, &m_Width, &m_TimeStamp );
-
-            if( m_Layer < FIRST_NO_COPPER_LAYER )
-                m_Layer = FIRST_NO_COPPER_LAYER;
-
-            if( m_Layer > LAST_NO_COPPER_LAYER )
-                m_Layer = LAST_NO_COPPER_LAYER;
-        }
-    }
-
-    return false;
-}
-
-
-int ZONE_CONTAINER::ReadDescr( LINE_READER* aReader )
-{
-    char* Line, * text;
-    char  netname_buffer[1024];
-    int   ret;
-    int   outline_hatch = CPolyLine::NO_HATCH;
-    bool  error = false, has_corner = false;
-
-    netname_buffer[0] = 0;
-
-    while( aReader->ReadLine() )
-    {
-        Line = aReader->Line();
-
-        if( strnicmp( Line, "ZCorner", 7 ) == 0 ) // new corner found
-        {
-            int x;
-            int y;
-            int flag;
-
-            text = Line + 7;
-            ret  = sscanf( text, "%d %d %d", &x, &y, &flag );
-
-            if( ret < 3 )
-            {
-                error = true;
-            }
-            else
-            {
-                if( !has_corner )
-                    m_Poly->Start( m_Layer, x, y, outline_hatch );
-                else
-                    AppendCorner( wxPoint( x, y ) );
-
-                has_corner = true;
-
-                if( flag )
-                    m_Poly->Close();
-            }
-        }
-        else if( strnicmp( Line, "ZInfo", 5 ) == 0 )   // general info found
-        {
-            int ts;
-            int netcode;
-
-            text = Line + 5;
-            ret  = sscanf( text, "%X %d %s", &ts, &netcode, netname_buffer );
-
-            if( ret < 3 )
-            {
-                error = true;
-            }
-            else
-            {
-                SetTimeStamp( ts );
-                SetNet( netcode );
-                ReadDelimitedText( netname_buffer, netname_buffer, 1024 );
-                m_Netname = FROM_UTF8( netname_buffer );
-            }
-        }
-        else if( strnicmp( Line, "ZLayer", 6 ) == 0 )  // layer found
-        {
-            int x;
-
-            text = Line + 6;
-            ret  = sscanf( text, "%d", &x );
-
-            if( ret < 1 )
-                error = true;
-            else
-                m_Layer = x;
-        }
-        else if( strnicmp( Line, "ZAux", 4 ) == 0 )    // aux info found
-        {
-            int  x;
-            char hopt[10];
-
-            text = Line + 4;
-            ret  = sscanf( text, "%d %c", &x, hopt );
-
-            if( ret < 2 )
-            {
-                error = true;
-            }
-            else
-            {
-                switch( hopt[0] )
-                {
-                case 'n':
-                case 'N':
-                    outline_hatch = CPolyLine::NO_HATCH;
-                    break;
-
-                case 'e':
-                case 'E':
-                    outline_hatch = CPolyLine::DIAGONAL_EDGE;
-                    break;
-
-                case 'f':
-                case 'F':
-                    outline_hatch = CPolyLine::DIAGONAL_FULL;
-                    break;
-                }
-            }
-            // Set hatch mode later, after reading outlines corners data
-        }
-
-        else if( strnicmp( Line, "ZPriority", 9 ) == 0 )
-        {
-            int tmp = 0;
-            text = Line + 9;
-            ret  = sscanf( text, "%d", &tmp );
-            if( ret < 1 )
-                return false;
-            SetPriority( tmp );
-        }
-
-        else if( strnicmp( Line, "ZSmoothing", 10 ) == 0 )
-        {
-            int tempSmoothingType;
-            int tempCornerRadius;
-            text = Line + 10;
-            ret  = sscanf( text, "%d %d", &tempSmoothingType, &tempCornerRadius );
-
-            if( ret < 2 )
-                return false;
-
-            if( tempSmoothingType >= ZONE_SETTINGS::SMOOTHING_LAST )
-                return false;
-
-            if( tempSmoothingType < 0 )
-                return false;
-
-            cornerSmoothingType = tempSmoothingType;
-            SetCornerRadius( tempCornerRadius );
-        }
-        else if( strnicmp( Line, "ZOptions", 8 ) == 0 )    // Options info found
-        {
-            int  fillmode = 1;
-            int  arcsegmentcount = ARC_APPROX_SEGMENTS_COUNT_LOW_DEF;
-            char fillstate = 'F';
-            text = Line + 8;
-            ret  = sscanf( text, "%d %d %c %d %d", &fillmode, &arcsegmentcount, &fillstate,
-                           &m_ThermalReliefGap, &m_ThermalReliefCopperBridge );
-
-            if( ret < 1 )  // Must find 1 or more args.
-                return false;
-            else
-                m_FillMode = fillmode ? 1 : 0;
-
-            if( arcsegmentcount >= ARC_APPROX_SEGMENTS_COUNT_HIGHT_DEF )
-                m_ArcToSegmentsCount = ARC_APPROX_SEGMENTS_COUNT_HIGHT_DEF;
-
-            m_IsFilled = (fillstate == 'S') ? true : false;
-        }
-        else if( strnicmp( Line, "ZClearance", 10 ) == 0 ) // Clearance and pad options info found
-        {
-            int  clearance = 200;
-            char padConnection;
-            text = Line + 10;
-            ret  = sscanf( text, "%d %1c", &clearance, &padConnection );
-
-            if( ret < 2 )
-            {
-                error = true;
-            }
-            else
-            {
-                m_ZoneClearance = clearance;
-
-                switch( padConnection )
-                {
-                case 'i':
-                case 'I':
-                    m_PadConnection = PAD_IN_ZONE;
-                    break;
-
-                case 't':
-                case 'T':
-                    m_PadConnection = THERMAL_PAD;
-                    break;
-
-                case 'x':
-                case 'X':
-                    m_PadConnection = PAD_NOT_IN_ZONE;
-                    break;
-                }
-            }
-        }
-        else if( strnicmp( Line, "ZMinThickness", 13 ) == 0 )    // Min Thickness info found
-        {
-            int thickness;
-            text = Line + 13;
-            ret  = sscanf( text, "%d", &thickness );
-
-            if( ret < 1 )
-                error = true;
-            else
-                m_ZoneMinThickness = thickness;
-        }
-        else if( strnicmp( Line, "$POLYSCORNERS", 13 ) == 0  )  // Read the PolysList (polygons used for fill areas in the zone)
-        {
-            while( aReader->ReadLine() )
-            {
-                Line = aReader->Line();
-
-                if( strnicmp( Line, "$endPOLYSCORNERS", 4 ) == 0  )
-                    break;
-
-                CPolyPt corner;
-                int     end_contour, utility;
-                utility = 0;
-                ret     = sscanf( Line,
-                                  "%d %d %d %d",
-                                  &corner.x,
-                                  &corner.y,
-                                  &end_contour,
-                                  &utility );
-                if( ret < 4 )
-                    return false;
-
-                corner.end_contour = end_contour ? true : false;
-                corner.utility     = utility;
-                m_FilledPolysList.push_back( corner );
-            }
-        }
-        else if( strnicmp( Line, "$FILLSEGMENTS", 13 ) == 0  )
-        {
-            SEGMENT segm;
-            while( aReader->ReadLine() )
-            {
-                Line = aReader->Line();
-
-                if( strnicmp( Line, "$endFILLSEGMENTS", 4 ) == 0  )
-                    break;
-
-                ret = sscanf( Line,
-                              "%d %d %d %d",
-                              &segm.m_Start.x,
-                              &segm.m_Start.y,
-                              &segm.m_End.x,
-                              &segm.m_End.y );
-                if( ret < 4 )
-                    return false;
-
-                m_FillSegmList.push_back( segm );
-            }
-        }
-        else if( strnicmp( Line, "$end", 4 ) == 0 )    // end of description
-        {
-            break;
-        }
-    }
-
-    if( !IsOnCopperLayer() )
-    {
-        m_FillMode = 0;
-        SetNet( 0 );
-    }
-
-    // Set hatch here, when outlines corners are read
-    m_Poly->SetHatch( outline_hatch, Mils2iu( m_Poly->GetDefaultHatchPitchMils() ) );
-
-    return error ? 0 : 1;
-}
-
-
-bool NETCLASS::ReadDescr( LINE_READER* aReader )
-{
-    bool        result = false;
-    char*       line;
-    char        buf[1024];
-    wxString    netname;
-
-    while( aReader->ReadLine() )
-    {
-        line = aReader->Line();
-        if( strnicmp( line, "AddNet", 6 ) == 0 )
-        {
-            ReadDelimitedText( buf, line + 6, sizeof(buf) );
-            netname = FROM_UTF8( buf );
-            Add( netname );
-            continue;
-        }
-
-        if( strnicmp( line, "$endNCLASS", sizeof( "$endNCLASS" ) - 1 ) == 0 )
-        {
-            result = true;
-            break;
-        }
-
-        if( strnicmp( line, "Clearance", 9 ) == 0 )
-        {
-            SetClearance( atoi( line + 9 ) );
-            continue;
-        }
-        if( strnicmp( line, "TrackWidth", 10 ) == 0 )
-        {
-            SetTrackWidth( atoi( line + 10 ) );
-            continue;
-        }
-        if( strnicmp( line, "ViaDia", 6 ) == 0 )
-        {
-            SetViaDiameter( atoi( line + 6 ) );
-            continue;
-        }
-        if( strnicmp( line, "ViaDrill", 8 ) == 0 )
-        {
-            SetViaDrill( atoi( line + 8 ) );
-            continue;
-        }
-
-        if( strnicmp( line, "uViaDia", 7 ) == 0 )
-        {
-            SetuViaDiameter( atoi( line + 7 ) );
-            continue;
-        }
-        if( strnicmp( line, "uViaDrill", 9 ) == 0 )
-        {
-            SetuViaDrill( atoi( line + 9 ) );
-            continue;
-        }
-
-        if( strnicmp( line, "Name", 4 ) == 0 )
-        {
-            ReadDelimitedText( buf, line + 4, sizeof(buf) );
-            m_Name = FROM_UTF8( buf );
-            continue;
-        }
-        if( strnicmp( line, "Desc", 4 ) == 0 )
-        {
-            ReadDelimitedText( buf, line + 4, sizeof(buf) );
-            SetDescription( FROM_UTF8( buf ) );
-            continue;
-        }
-    }
-
-    return result;
-}
-
-
-
-/**
- * Function ReadTextePcbDescr
- * Read a text description from pcb file.
- *
- * For a single line text:
- *
- * $TEXTPCB
- * Te "Text example"
- * Po 66750 53450 600 800 150 0
- * From 24 1 0 Italic
- * $EndTEXTPCB
- *
- * For a multi line text
- *
- * $TEXTPCB
- * Te "Text example"
- * Nl "Line 2"
- * Po 66750 53450 600 800 150 0
- * From 24 1 0 Italic
- * $EndTEXTPCB
- * Nl "line nn" is a line added to the current text
- */
-int TEXTE_PCB::ReadTextePcbDescr( LINE_READER* aReader )
-{
-    char* line;
-    char  text[1024];
-    char  style[256];
-
-    while( aReader->ReadLine() )
-    {
-        line = aReader->Line();
-        if( strnicmp( line, "$EndTEXTPCB", 11 ) == 0 )
-            return 0;
-        if( strncmp( line, "Te", 2 ) == 0 ) // Text line (first line for multi line texts
-        {
-            ReadDelimitedText( text, line + 2, sizeof(text) );
-            m_Text = FROM_UTF8( text );
-            continue;
-        }
-        if( strncmp( line, "nl", 2 ) == 0 ) // next line of the current text
-        {
-            ReadDelimitedText( text, line + 2, sizeof(text) );
-            m_Text.Append( '\n' );
-            m_Text += FROM_UTF8( text );
-            continue;
-        }
-        if( strncmp( line, "Po", 2 ) == 0 )
-        {
-            double angle;
-            sscanf( line + 2, " %d %d %d %d %d %lf",
-                    &m_Pos.x, &m_Pos.y, &m_Size.x, &m_Size.y,
-                    &m_Thickness, &angle );
-
-            SetOrientation( angle );
-
-            // Ensure the text has minimal size to see this text on screen:
-            if( m_Size.x < 5 )
-                m_Size.x = 5;
-            if( m_Size.y < 5 )
-                m_Size.y = 5;
-            continue;
-        }
-        if( strncmp( line, "De", 2 ) == 0 )
-        {
-            style[0] = 0;
-            int normal_display = 1;
-            char hJustify = 'c';
-            sscanf( line + 2, " %d %d %lX %s %c\n", &m_Layer, &normal_display,
-                    &m_TimeStamp, style, &hJustify );
-
-            m_Mirror = normal_display ? false : true;
-
-            if( m_Layer < FIRST_COPPER_LAYER )
-                m_Layer = FIRST_COPPER_LAYER;
-            if( m_Layer > LAST_NO_COPPER_LAYER )
-                m_Layer = LAST_NO_COPPER_LAYER;
-
-            if( strnicmp( style, "Italic", 6 ) == 0 )
-                m_Italic = 1;
-            else
-                m_Italic = 0;
-
-            switch( hJustify )
-            {
-            case 'l':
-            case 'L':
-                m_HJustify = GR_TEXT_HJUSTIFY_LEFT;
-                break;
-            case 'c':
-            case 'C':
-                m_HJustify = GR_TEXT_HJUSTIFY_CENTER;
-                break;
-            case 'r':
-            case 'R':
-                m_HJustify = GR_TEXT_HJUSTIFY_RIGHT;
-                break;
-            default:
-                m_HJustify = GR_TEXT_HJUSTIFY_CENTER;
-                break;
-            }
-            continue;
-        }
-    }
-
-     // Set a reasonable width:
-    if( m_Thickness < 1 )
-        m_Thickness = 1;
-    m_Thickness = Clamp_Text_PenSize( m_Thickness, m_Size );
-
-    return 1;
-}
-
-/**
- * Function ReadDescr
- * Read description from a given line in "*.brd" format.
- * @param aReader The line reader object which contains the first line of description.
- * @return int - > 0 if success reading else 0.
- */
-int TEXTE_MODULE::ReadDescr( LINE_READER* aReader )
-{
-    int     success = true;
-    int     type;
-    char    BufCar1[128], BufCar2[128], BufCar3[128];
-    char*   line = aReader->Line();
-    double  angle;
-
-    int     layer = SILKSCREEN_N_FRONT;
-
-    BufCar1[0] = 0;
-    BufCar2[0] = 0;
-    BufCar3[0] = 0;
-
-    if( sscanf( line + 1, "%d %d %d %d %d %lf %d %s %s %d %s",
-                &type,
-                &m_Pos0.x, &m_Pos0.y,
-                &m_Size.y, &m_Size.x,
-                &angle,    &m_Thickness,
-                BufCar1, BufCar2, &layer, BufCar3 ) >= 10 )
-    {
-        success = true;
-
-        SetOrientation( angle );
-    }
-
-
-    if( (type != TEXT_is_REFERENCE) && (type != TEXT_is_VALUE) )
-        type = TEXT_is_DIVERS;
-
-    m_Type = type;
-
-    // Due to the Pcbnew history, .m_Orient is saved in screen value
-    // but it is handled as relative to its parent footprint
-    m_Orient -= ( (MODULE*) m_Parent )->m_Orient;
-
-    if( BufCar1[0] == 'M' )
-        m_Mirror = true;
-    else
-        m_Mirror = false;
-
-    if( BufCar2[0]  == 'I' )
-        m_NoShow = true;
-    else
-        m_NoShow = false;
-
-    if( BufCar3[0]  == 'I' )
-        m_Italic = true;
-    else
-        m_Italic = false;
-
-    // Test for a reasonable layer:
-    if( layer < 0 )
-        layer = 0;
-    if( layer > LAST_NO_COPPER_LAYER )
-        layer = LAST_NO_COPPER_LAYER;
-    if( layer == LAYER_N_BACK )
-        layer = SILKSCREEN_N_BACK;
-    else if( layer == LAYER_N_FRONT )
-        layer = SILKSCREEN_N_FRONT;
-
-    SetLayer( layer );
-
-    // Calculate the actual position.
-    SetDrawCoord();
-
-
-    // Search and read the "text" string (a quoted text).
-    ReadDelimitedText( &m_Text, line );
-
-    // Test for a reasonable size:
-    if( m_Size.x < TEXTS_MIN_SIZE )
-        m_Size.x = TEXTS_MIN_SIZE;
-    if( m_Size.y < TEXTS_MIN_SIZE )
-        m_Size.y = TEXTS_MIN_SIZE;
-
-    // Set a reasonable width:
-    if( m_Thickness < 1 )
-        m_Thickness = 1;
-    m_Thickness = Clamp_Text_PenSize( m_Thickness, m_Size );
-
-    return success;
-}
-
-#endif  // USE_NEW_PCBNEW_LOAD

pcbnew/librairi.cpp

@@ -199,7 +199,7 @@ MODULE* FOOTPRINT_EDIT_FRAME::Import_Module()
                 return NULL;
             }
         }
-        catch( IO_ERROR ioe )
+        catch( const IO_ERROR& ioe )
         {
             DisplayError( this, ioe.errorText );
             return NULL;
@@ -222,7 +222,7 @@ MODULE* FOOTPRINT_EDIT_FRAME::Import_Module()
                 return NULL;
             }
         }
-        catch( IO_ERROR ioe )
+        catch( const IO_ERROR& ioe )
         {
             DisplayError( this, ioe.errorText );
             return NULL;
@@ -259,7 +259,7 @@ MODULE* FOOTPRINT_EDIT_FRAME::Import_Module()
                 return NULL;
             }
         }
-        catch( IO_ERROR ioe )
+        catch( const IO_ERROR& ioe )
         {
             DisplayError( this, ioe.errorText );
             return NULL;
@@ -334,7 +334,7 @@ void FOOTPRINT_EDIT_FRAME::Export_Module( MODULE* aModule )
         fprintf( fp, "%s", pcb_io.GetStringOutput( false ).c_str() );
         fclose( fp );
     }
-    catch( IO_ERROR ioe )
+    catch( const IO_ERROR& ioe )
     {
         DisplayError( this, ioe.errorText );
         return;
@@ -357,7 +357,7 @@ bool FOOTPRINT_EDIT_FRAME::SaveCurrentModule( const wxString* aLibPath )
 
         pi->FootprintSave( libPath, GetBoard()->m_Modules );
     }
-    catch( IO_ERROR ioe )
+    catch( const IO_ERROR& ioe )
     {
         DisplayError( this, ioe.errorText );
         return false;
@@ -429,7 +429,7 @@ wxString FOOTPRINT_EDIT_FRAME::CreateNewLibrary()
             writable = pi->IsFootprintLibWritable( libPath );
             exists   = true;    // no exception was thrown, lib must exist.
         }
-        catch( IO_ERROR )
+        catch( const IO_ERROR& )
         {
             // ignore, original values of 'writable' and 'exists' are accurate.
         }
@@ -455,7 +455,7 @@ wxString FOOTPRINT_EDIT_FRAME::CreateNewLibrary()
 
         pi->FootprintLibCreate( libPath );
     }
-    catch( IO_ERROR ioe )
+    catch( const IO_ERROR& ioe )
     {
         DisplayError( this, ioe.errorText );
         return wxEmptyString;
@@ -499,7 +499,7 @@ bool FOOTPRINT_EDIT_FRAME::DeleteModuleFromCurrentLibrary()
     {
         FootprintLibs()->FootprintDelete( nickname, fpname );
     }
-    catch( IO_ERROR ioe )
+    catch( const IO_ERROR& ioe )
     {
         DisplayError( this, ioe.errorText );
         return false;
@@ -568,7 +568,7 @@ void PCB_EDIT_FRAME::ArchiveModulesOnBoard( bool aNewModulesOnly )
             }
         }
     }
-    catch( IO_ERROR ioe )
+    catch( const IO_ERROR& ioe )
     {
         DisplayError( this, ioe.errorText );
     }
@@ -655,7 +655,7 @@ bool PCB_BASE_FRAME::Save_Module_In_Library( const wxString& aLibrary,
         // own if the library or footprint is not writable.
         FootprintLibs()->FootprintSave( aLibrary, aModule );
     }
-    catch( IO_ERROR ioe )
+    catch( const IO_ERROR& ioe )
     {
         DisplayError( this, ioe.errorText );
         return false;

pcbnew/loadcmp.cpp

@@ -220,7 +220,7 @@ MODULE* PCB_BASE_FRAME::LoadModuleFromLibrary( const wxString& aLibrary,
     {
         module = loadFootprint( fpid );
     }
-    catch( IO_ERROR ioe )
+    catch( const IO_ERROR& ioe )
     {
         wxLogDebug( wxT( "An error occurred attemping to load footprint '%s'.\n\nError: %s" ),
                     fpid.Format().c_str(), GetChars( ioe.errorText ) );
@@ -252,7 +252,7 @@ MODULE* PCB_BASE_FRAME::LoadModuleFromLibrary( const wxString& aLibrary,
             {
                 module = loadFootprint( fpid );
             }
-            catch( IO_ERROR ioe )
+            catch( const IO_ERROR& ioe )
             {
                 wxLogDebug( wxT( "An error occurred attemping to load footprint '%s'.\n\nError: %s" ),
                             fpid.Format().c_str(), GetChars( ioe.errorText ) );
@@ -304,7 +304,7 @@ MODULE* PCB_BASE_FRAME::LoadFootprint( const FPID& aFootprintId )
     {
         module = loadFootprint( aFootprintId );
     }
-    catch( IO_ERROR ioe )
+    catch( const IO_ERROR& ioe )
     {
         wxLogDebug( wxT( "An error occurred attemping to load footprint '%s'.\n\nError: %s" ),
                     aFootprintId.Format().c_str(), GetChars( ioe.errorText ) );
@@ -321,31 +321,7 @@ MODULE* PCB_BASE_FRAME::loadFootprint( const FPID& aFootprintId )
 
     wxCHECK_MSG( fptbl, NULL, wxT( "Cannot look up FPID in NULL FP_LIB_TABLE." ) );
 
-    wxString   nickname = aFootprintId.GetLibNickname();
-    wxString   fpname   = aFootprintId.GetFootprintName();
-
-    if( nickname.size() )
-    {
-        return fptbl->FootprintLoad( nickname, fpname );
-    }
-
-    // user did not enter a nickname, just a footprint name, help him out a little:
-    else
-    {
-        std::vector<wxString> nicks = fptbl->GetLogicalLibs();
-
-        // Search each library going through libraries alphabetically.
-        for( unsigned i = 0;  i<nicks.size();  ++i )
-        {
-            // FootprintLoad() returns NULL on not found, does not throw exception
-            // unless there's an IO_ERROR.
-            MODULE* ret = fptbl->FootprintLoad( nicks[i], fpname );
-            if( ret )
-                return ret;
-        }
-
-        return NULL;
-    }
+    return fptbl->FootprintLoadWithOptionalNickname( aFootprintId );
 }
 
 
@@ -557,7 +533,7 @@ void FOOTPRINT_EDIT_FRAME::OnSaveLibraryAs( wxCommandEvent& aEvent )
             // m is deleted here by auto_ptr.
         }
     }
-    catch( IO_ERROR ioe )
+    catch( const IO_ERROR& ioe )
     {
         DisplayError( this, ioe.errorText );
         return;

pcbnew/moduleframe.cpp

@@ -279,7 +279,7 @@ wxString FOOTPRINT_EDIT_FRAME::getLibPath()
 
         return row->GetFullURI( true );
     }
-    catch( IO_ERROR ioe )
+    catch( const IO_ERROR& ioe )
     {
         return wxEmptyString;
     }
@@ -639,7 +639,7 @@ void FOOTPRINT_EDIT_FRAME::updateTitle()
             if( !writable )
                 title += _( " [Read Only]" );
         }
-        catch( IO_ERROR ioe )
+        catch( const IO_ERROR& ioe )
         {
             // user may be bewildered as to why after selecting a library it is not showing up
             // in the title, we could show an error message, but that should have been done at time

pcbnew/netlist.cpp

@@ -85,7 +85,7 @@ void PCB_EDIT_FRAME::ReadPcbNetlist( const wxString& aNetlistFileName,
         netlistReader->LoadNetlist();
         loadFootprints( netlist, aReporter );
     }
-    catch( IO_ERROR& ioe )
+    catch( const IO_ERROR& ioe )
     {
         msg.Printf( _( "Error loading netlist.\n%s" ), ioe.errorText.GetData() );
         wxMessageBox( msg, _( "Netlist Load Error" ), wxOK | wxICON_ERROR );

pcbnew/pcbnew.cpp

@@ -208,13 +208,13 @@ MY_API( KIFACE* ) KIFACE_GETTER(  int* aKIFACEversion, int aKiwayVersion, PGM_BA
     return &kiface;
 }
 
-
+#if defined(BUILD_KIWAY_DLL)
 PGM_BASE& Pgm()
 {
     wxASSERT( process );    // KIFACE_GETTER has already been called.
     return *process;
 }
-
+#endif
 
 /**
  * Function set3DShapesPath
@@ -484,6 +484,5 @@ void IFACE::OnKifaceEnd()
     // This should only be called if python was setup correctly.
 
     pcbnewFinishPythonScripting();
-
 #endif
 }

pcbnew/pcbnew_config.cpp

@@ -29,7 +29,6 @@
  */
 
 #include <fctsys.h>
-//#include <pgm_base.h>
 #include <kiface_i.h>
 #include <project.h>
 #include <class_drawpanel.h>
@@ -239,7 +238,7 @@ bool PCB_EDIT_FRAME::LoadProjectSettings( const wxString& aProjectFileName )
         fn.SetExt( ProjectFileExtension );
 
     // was: wxGetApp().ReadProjectConfig( fn.GetFullPath(), GROUP, GetProjectFileParameters(), false );
-    Prj().ConfigLoad( Kiface().KifaceSearch(), fn.GetFullPath(), GROUP, GetProjectFileParameters(), false );
+    Prj().ConfigLoad( Kiface().KifaceSearch(), fn.GetFullPath(), GROUP_PCB, GetProjectFileParameters(), false );
 
     // Dick 5-Feb-2012: I don't agree with this, the BOARD contents should dictate
     // what is visible or not, even initially.  And since PCB_EDIT_FRAME projects settings
@@ -302,9 +301,7 @@ void PCB_EDIT_FRAME::SaveProjectSettings( bool aAskForSave )
         fn = dlg.GetPath();
     }
 
-    SEARCH_STACK&   search = Kiface().KifaceSearch();
-
-    Prj().ConfigSave( search, fn.GetFullPath(), GROUP, GetProjectFileParameters() );
+    Prj().ConfigSave( Kiface().KifaceSearch(), fn.GetFullPath(), GROUP_PCB, GetProjectFileParameters() );
 }
 
 
@@ -315,7 +312,7 @@ PARAM_CFG_ARRAY PCB_EDIT_FRAME::GetProjectFileParameters()
     pca.push_back( new PARAM_CFG_FILENAME( wxT( "PageLayoutDescrFile" ),
                                           &BASE_SCREEN::m_PageLayoutDescrFileName ) );
 
-    pca.push_back( new PARAM_CFG_FILENAME( wxT( "LibDir" ), &g_UserLibDirBuffer, GROUPLIB ) );
+    pca.push_back( new PARAM_CFG_FILENAME( wxT( "LibDir" ), &g_UserLibDirBuffer, GROUP_PCB_LIBS ) );
 
     pca.push_back( new PARAM_CFG_FILENAME( wxT( "LastNetListRead" ), &m_lastNetListRead ) );
 

pcbnew/pcbnew_config.h

 /**
  * @file pcbnew_config.h
- * @brief Cconfiguration parameters for Pcbnew.
+ * @brief Configuration parameters for Pcbnew.
  */
 
 #ifndef _PCBNEW_CONFIG_H_
@@ -9,10 +9,6 @@
 #include <config_params.h>
 #include <colors_selection.h>
 
-#define GROUP       wxT( "/pcbnew" )
-#define GROUPLIB    wxT( "/pcbnew/libraries" )
-#define GROUPCOMMON wxT( "/common" )
-
 /* Useful macro : */
 #define LOC_COLOR(layer)            &g_ColorsSettings.m_LayersColors[layer]
 #define ITEM_COLOR(item_visible)    &g_ColorsSettings.m_ItemsColors[item_visible]

pcbnew/specctra_export.cpp

@@ -162,7 +162,7 @@ bool PCB_EDIT_FRAME::ExportSpecctraFile( const wxString& aFullFilename )
         // if an exception is thrown by FromBOARD or ExportPCB(), then
         // ~SPECCTRA_DB() will close the file.
     }
-    catch( IO_ERROR& ioe )
+    catch( const IO_ERROR& ioe )
     {
         ok = false;
 
@@ -1322,7 +1322,7 @@ bool SPECCTRA_DB::GetBoardPolygonOutlines( BOARD* aBoard,
             aHoles.CloseLastContour();
         }
     }
-    catch( IO_ERROR ioe )
+    catch( const IO_ERROR& ioe )
     {
         // Creates a valid polygon outline is not possible.
         // So uses the board edge cuts bounding box to create a

pcbnew/specctra_import.cpp

@@ -102,14 +102,15 @@ void PCB_EDIT_FRAME::ImportSpecctraSession( wxCommandEvent& event )
         db.LoadSESSION( fullFileName );
         db.FromSESSION( GetBoard() );
     }
-    catch( IO_ERROR& ioe )
+    catch( const IO_ERROR& ioe )
     {
-        ioe.errorText += '\n';
-        ioe.errorText += _("BOARD may be corrupted, do not save it.");
-        ioe.errorText += '\n';
-        ioe.errorText += _("Fix problem and try again.");
+        wxString msg = ioe.errorText;
+        msg += '\n';
+        msg += _("BOARD may be corrupted, do not save it.");
+        msg += '\n';
+        msg += _("Fix problem and try again.");
 
-        DisplayError( this, ioe.errorText );
+        DisplayError( this, msg );
         return;
     }
 

pcbnew/specctra_test.cpp

@@ -63,7 +63,7 @@ int main( int argc, char** argv )
 //        db.LoadPCB( filename );
         db.LoadSESSION( filename );
     }
-    catch( IO_ERROR ioe )
+    catch( const IO_ERROR& ioe )
     {
         fprintf( stderr, "%s\n", TO_UTF8(ioe.errorText) );
         failed = true;

scripts/kicad-install.sh

@@ -125,7 +125,10 @@ install_prerequisites()
     fi
 
     # ensure bzr name and email are set.  No message since bzr prints an excellent diagnostic.
-    bzr whoami || exit 2
+    bzr whoami || {
+        echo "WARNING: You have not set bzr whoami, so I will set a dummy."
+        export BZR_EMAIL="Kicad Build <nobody@foo>"
+    }
 }
 
 
@@ -270,10 +273,12 @@ install_or_update()
     echo " kicad-lib.bzr installed."
 
 
-    echo "step 9) as non-root, install user configuration files..."
+    echo "step 9) as non-root, install global fp-lib-table if none already installed..."
     # install ~/fp-lib-table
-    make  install_github_fp-lib-table
-    echo " kicad user-configuration files installed."
+    if [ ! -e ~/fp-lib-table ]; then
+        make  install_github_fp-lib-table
+        echo " global fp-lib-table installed."
+    fi
 
 
     echo "step 10) installing documentation..."

tools/property_tree.cpp

@@ -83,7 +83,7 @@ int main( int argc, char** argv )
 #endif
 
     }
-    catch( IO_ERROR ioe )
+    catch( const IO_ERROR& ioe )
     {
         fprintf( stderr, "%s\n", TO_UTF8( ioe.errorText ) );
     }