Minor fixes (typo in messages)

Documentation/compiling/COMPILING.txt

 Compiling KiCad from Source
 ===========================
 KiCad Documentation Team
-Last revised on 12-mars-2012 by jp Charras
+Last revised on 2014-december-24 by JP Charras
 
 Introduction
 ------------
@@ -32,7 +32,7 @@ KiCad from source.
 * CMake   - Cross-platform make
 * GLUT    - The OpenGL Utility Library
 * GLEW
-* wxGTK or wxWidgets  - The wxWidgets GUI toolkit with GTK+ bindings
+* wxWidgets  - The wxWidgets GUI toolkit with GTK+ bindings version 3.0 or more
 * libbz2    (dev)
 * libcairo  (dev)
 
@@ -57,7 +57,7 @@ Compiler and basic development tools
 Make sure g++, make and other tools are in your path.
 If windows, then try running g++ and make from within your msys bash shell.
 
-PLEASE NOTE: g++ 4.7.1 at least (possibly the 4.7.x series) is known to
+PLEASE NOTE: g++ 4.7.1 and 4.7.2 are known to
 miscompile pcbnew (it get zones wrong) with -O2; using -O1 is a suitable
 workaround until they fix the compiler.
 
@@ -68,7 +68,7 @@ WARNING:
  see wxWidgets_patch_notes.txt for patches and issues in wxWidgets.
 
 On Windows, download
-http://sourceforge.net/projects/wxwindows/files/3.0.0/wxWidgets-3.0.0.zip/download
+http://sourceforge.net/projects/wxwindows/files/3.0.2/wxWidgets-3.0.2.zip/download
 or a newer version.
 Do NOT use previous versions which all have annoying issues for KiCad.
 Start msys so you have a bash shell.
@@ -95,6 +95,10 @@ or more recent (Older versions have a print function which does not work).
 Verify that wx-config is in your path by running it from a command prompt.
 Linux users then go to next step.
 
+Note also wxWidgets must be compiled with the wxWebView support.
+This is the default when building wxWidgets, but only if the libwebkitgtk-dev is installed
+before building wxWidgets (sudo apt-get install libwebkitgtk-dev)
+
 Install CMake
 -------------
 On windows, download the installation binary for windows from cmake.org.
@@ -167,9 +171,12 @@ Linux and windows users both then make two "out of source" build directories:
 
 On either cmake command line shown below, you can optionally include
     -DCMAKE_INSTALL_PREFIX=<finallInstallDir>
+For instance on Linux: <finallInstallDir>=/usr/local/kicad or ~/kicad
 
 On windows, run the following command:
     cmake -G "MSYS Makefiles" -DCMAKE_BUILD_TYPE=Release -DwxWidgets_ROOT_DIR=<wxInstallDir> ../../
+Avoid installing Kicad on C: disk, which is protected by Windows.
+Use D: or E: ...
 
 On linux, run instead the following command:
     cmake -DCMAKE_BUILD_TYPE=Release ../../

Documentation/compiling/build-config.txt

@@ -100,9 +100,12 @@ USE_IMAGES_IN_MENUS (ON/OFF)
 ----------------------------
 Default: OFF for OSX, ON for other platforms.
 
-This option is used to enable or disable building KiCad with images in menu
+This option is used to enable or disable building KiCad with images (icons) in menu
 items.  If this is not defined when CMake is used to create the build files,
 images will be included in menu items on all platforms except OSX.
+Note also, on Linux, some window managers do not show icons in menu, or
+show them only if the current option is activated.
+Therefore, even if you have icons in menus, they will be not always displayed
 
 
 DOWNLOAD_DIR (PATH)
@@ -138,6 +141,7 @@ Default: OFF
 This option enables or disables building Python scripting support within KiCad.
 Currently only Pcbnew is supported.  This option requires SWIG and Python to be
 installed on the system.
+It allows using footprint wizards in footprint editor to create new footprints
 
 
 KICAD_SCRIPTING_MODULES (ON/OFF)
@@ -147,6 +151,8 @@ Default: OFF
 This option enables or disables building KiCad Python modules that can be used
 externally by Python.  Currently only Pcbnew is supported.  This option
 requires SWIG and Python to be installed on the system.
+This python module is used to edit board files (.kicad_pcb files) from a
+python script, outside kicad.
 
 
 KICAD_SCRIPTING_WXPYTHON (ON/OFF)
@@ -156,6 +162,7 @@ Default: OFF
 This option enables or disables building wxPython support into the KiCad
 scripting support.  Currently only Pcbnew has scripting support.  This option requires
 SWIG, Python, and wxPython to be installed on the system.
+It allows execution of python scripts insided Pcbnew, during a session.
 
 
 PYTHON_SITE_PACKAGE_PATH (PATH)
@@ -169,11 +176,21 @@ different path, set this variable to the desired path.
 
 BUILD_GITHUB_PLUGIN (ON/OFF)
 ----------------------------
-Default: OFF
+Default: ON
 
 This option enables or disables building KiCad with a pcbnew plugin for loading
 footprints from a GitHub repository.
 
+KICAD_USE_WEBKIT (ON/OFF)
+----------------------------
+Default: ON (and OFF when BUILD_GITHUB_PLUGIN is OFF)
+
+This option enables or disables building a web viewer used if the
+footprint library table wizard to easily add footprints library entries
+to this tables when libraries are on a GitHub repository.
+This option need the full support of wxWebview/WebKit in wxWidgets, which is not
+always the case on Linux.
+
 
 KICAD_REPO_NAME (STRING)
 ------------------------

pcb_calculator/dialogs/pcb_calculator_frame_base.cpp

 ///////////////////////////////////////////////////////////////////////////
-// C++ code generated with wxFormBuilder (version Nov  5 2013)
+// C++ code generated with wxFormBuilder (version Jun  5 2014)
 // http://www.wxformbuilder.org/
 //
 // PLEASE DO "NOT" EDIT THIS FILE!
@@ -166,7 +166,7 @@ PCB_CALCULATOR_FRAME_BASE::PCB_CALCULATOR_FRAME_BASE( wxWindow* parent, wxWindow
 	
 	m_staticTextRegType = new wxStaticText( m_panelRegulators, wxID_ANY, _("Type"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_staticTextRegType->Wrap( -1 );
-	m_staticTextRegType->SetToolTip( _("Type of the regulator.\nThere are 2 types:\n- regulators which have a dedicted sense pin for the voltage regulation.\n- 3 terminal pins.") );
+	m_staticTextRegType->SetToolTip( _("Type of the regulator.\nThere are 2 types:\n- regulators which have a dedicated sense pin for the voltage regulation.\n- 3 terminal pins.") );
 	
 	fgSizerRegParams->Add( m_staticTextRegType, 0, wxALL, 5 );
 	
@@ -1232,7 +1232,7 @@ PCB_CALCULATOR_FRAME_BASE::PCB_CALCULATOR_FRAME_BASE( wxWindow* parent, wxWindow
 	
 	wxArrayString m_BoardClassesUnitsSelectorChoices;
 	m_BoardClassesUnitsSelector = new UNIT_SELECTOR_LEN( m_panelBoardClass, wxID_ANY, wxDefaultPosition, wxDefaultSize, m_BoardClassesUnitsSelectorChoices, 0 );
-	m_BoardClassesUnitsSelector->SetSelection( -1 );
+	m_BoardClassesUnitsSelector->SetSelection( 0 );
 	bSizerBoardClass->Add( m_BoardClassesUnitsSelector, 0, wxALL, 5 );
 	
 	wxBoxSizer* brdclsSizerRight;

pcb_calculator/dialogs/pcb_calculator_frame_base.fbp

 <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
 <wxFormBuilder_Project>
-    <FileVersion major="1" minor="11" />
+    <FileVersion major="1" minor="13" />
     <object class="Project" expanded="1">
         <property name="class_decoration"></property>
         <property name="code_generation">C++</property>
@@ -44,7 +44,7 @@
             <property name="minimum_size"></property>
             <property name="name">PCB_CALCULATOR_FRAME_BASE</property>
             <property name="pos"></property>
-            <property name="size">670,489</property>
+            <property name="size">702,489</property>
             <property name="style">wxDEFAULT_FRAME_STYLE|wxRESIZE_BORDER</property>
             <property name="subclass">KIWAY_PLAYER; kiway_player.h</property>
             <property name="title">PCB Calculator</property>
@@ -2308,7 +2308,7 @@
                                                             <property name="style"></property>
                                                             <property name="subclass"></property>
                                                             <property name="toolbar_pane">0</property>
-                                                            <property name="tooltip">Type of the regulator.&#x0A;There are 2 types:&#x0A;- regulators which have a dedicted sense pin for the voltage regulation.&#x0A;- 3 terminal pins.</property>
+                                                            <property name="tooltip">Type of the regulator.&#x0A;There are 2 types:&#x0A;- regulators which have a dedicated sense pin for the voltage regulation.&#x0A;- 3 terminal pins.</property>
                                                             <property name="window_extra_style"></property>
                                                             <property name="window_name"></property>
                                                             <property name="window_style"></property>
@@ -18263,7 +18263,7 @@
                                             <property name="pin_button">1</property>
                                             <property name="pos"></property>
                                             <property name="resize">Resizable</property>
-                                            <property name="selection">-1</property>
+                                            <property name="selection">0</property>
                                             <property name="show">1</property>
                                             <property name="size"></property>
                                             <property name="style"></property>

pcb_calculator/dialogs/pcb_calculator_frame_base.h

 ///////////////////////////////////////////////////////////////////////////
-// C++ code generated with wxFormBuilder (version Nov  5 2013)
+// C++ code generated with wxFormBuilder (version Jun  5 2014)
 // http://www.wxformbuilder.org/
 //
 // PLEASE DO "NOT" EDIT THIS FILE!
@@ -293,7 +293,7 @@ class PCB_CALCULATOR_FRAME_BASE : public KIWAY_PLAYER
 	
 	public:
 		
-		PCB_CALCULATOR_FRAME_BASE( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("PCB Calculator"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxSize( 670,489 ), long style = wxDEFAULT_FRAME_STYLE|wxRESIZE_BORDER|wxFULL_REPAINT_ON_RESIZE|wxTAB_TRAVERSAL );
+		PCB_CALCULATOR_FRAME_BASE( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("PCB Calculator"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxSize( 702,489 ), long style = wxDEFAULT_FRAME_STYLE|wxRESIZE_BORDER|wxFULL_REPAINT_ON_RESIZE|wxTAB_TRAVERSAL );
 		
 		~PCB_CALCULATOR_FRAME_BASE();
 	

pcb_calculator/pcb_calculator_frame.cpp

@@ -157,7 +157,7 @@ void PCB_CALCULATOR_FRAME::OnClosePcbCalc( wxCloseEvent& event )
                 msg.Printf( _("Unable to write file<%s>\n"\
 "Do you want to exit and abandon your change?"), GetDataFilename().c_str() );
 
-                int opt = wxMessageBox( msg, _("Write Data File Errror"),
+                int opt = wxMessageBox( msg, _("Write Data File Error"),
                                         wxYES_NO | wxICON_QUESTION );
                 if( opt  == wxNO )
                     return;

pcbnew/dialogs/dialog_freeroute_exchange_base.cpp

@@ -42,8 +42,8 @@ DIALOG_FREEROUTE_BASE::DIALOG_FREEROUTE_BASE( wxWindow* parent, wxWindowID id, c
 	
 	bLeftButtonsSizer->Add( m_ExportDSN, 0, wxALL|wxEXPAND, 5 );
 	
-	m_buttonLaunchFreeroute = new wxButton( this, wxID_BUTTON_LAUNCH, _("Launch FreeRouter and Launch FreeRouter"), wxDefaultPosition, wxDefaultSize, 0 );
-	m_buttonLaunchFreeroute->SetToolTip( _("Use Java Web Start function to run FreeRouter via Internet (or your Browser if not found)") );
+	m_buttonLaunchFreeroute = new wxButton( this, wxID_BUTTON_LAUNCH, _("Export a Specctra Design and Launch FreeRoute"), wxDefaultPosition, wxDefaultSize, 0 );
+	m_buttonLaunchFreeroute->SetToolTip( _("FreeRouter can be run only if freeroute.jar is found in Kicad binaries folder") );
 	
 	bLeftButtonsSizer->Add( m_buttonLaunchFreeroute, 0, wxALL|wxEXPAND, 5 );
 	

pcbnew/dialogs/dialog_freeroute_exchange_base.fbp

@@ -343,7 +343,7 @@
                                                         <property name="gripper">0</property>
                                                         <property name="hidden">0</property>
                                                         <property name="id">wxID_BUTTON_LAUNCH</property>
-                                                        <property name="label">Launch FreeRouter and Launch FreeRouter</property>
+                                                        <property name="label">Export a Specctra Design and Launch FreeRoute</property>
                                                         <property name="max_size"></property>
                                                         <property name="maximize_button">0</property>
                                                         <property name="maximum_size"></property>
@@ -364,7 +364,7 @@
                                                         <property name="style"></property>
                                                         <property name="subclass"></property>
                                                         <property name="toolbar_pane">0</property>
-                                                        <property name="tooltip">Use Java Web Start function to run FreeRouter via Internet (or your Browser if not found)</property>
+                                                        <property name="tooltip">FreeRouter can be run only if freeroute.jar is found in Kicad binaries folder</property>
                                                         <property name="validator_data_type"></property>
                                                         <property name="validator_style">wxFILTER_NONE</property>
                                                         <property name="validator_type">wxDefaultValidator</property>

pcbnew/dialogs/dialog_select_dirlist_base.cpp

@@ -16,7 +16,7 @@ DIALOG_SELECT_DIRLIST_BASE::DIALOG_SELECT_DIRLIST_BASE( wxWindow* parent, wxWind
 	wxBoxSizer* bSizerMain;
 	bSizerMain = new wxBoxSizer( wxVERTICAL );
 	
-	m_staticText = new wxStaticText( this, wxID_ANY, _("The footprint library is a folde.\nFootprints are files inside this folder."), wxDefaultPosition, wxDefaultSize, 0 );
+	m_staticText = new wxStaticText( this, wxID_ANY, _("The footprint library is a folder.\nFootprints are files inside this folder."), wxDefaultPosition, wxDefaultSize, 0 );
 	m_staticText->Wrap( -1 );
 	m_staticText->SetFont( wxFont( wxNORMAL_FONT->GetPointSize(), 70, 90, 92, false, wxEmptyString ) );
 	

pcbnew/dialogs/dialog_select_dirlist_base.fbp

@@ -125,7 +125,7 @@
                         <property name="gripper">0</property>
                         <property name="hidden">0</property>
                         <property name="id">wxID_ANY</property>
-                        <property name="label">The footprint library is a folde.&#x0A;Footprints are files inside this folder.</property>
+                        <property name="label">The footprint library is a folder.&#x0A;Footprints are files inside this folder.</property>
                         <property name="max_size"></property>
                         <property name="maximize_button">0</property>
                         <property name="maximum_size"></property>

scripts/kicad-install.sh

@@ -47,7 +47,25 @@ REVISION=$TESTING
 # CMake Options
 OPTS="$OPTS -DBUILD_GITHUB_PLUGIN=ON"       # needed by $STABLE revision
 
-# Python scripting, uncomment to enable
+# Uncomment this line if you have issues to build kicad with a wxWidgets with is not built
+# with webkit/webview support, i.e. if you have this error:
+# error "wxWidgets must be built with wxWebView support enabled. Please rebuild wxWidgets"
+# but you will lose the wizard which allows you to easily add .pretty libs on github server
+# (you will need to enter by hand their url in footprint lib table dialog)
+#OPTS="$OPTS -DKICAD_USE_WEBKIT=OFF"
+
+# Python scripting, uncomment only one to enable:
+
+# Basic python scripting: gives access to wizards like footprint wizards (recommended)
+# be sure you have python 2.7 installed
+#OPTS="$OPTS -DKICAD_SCRIPTING=ON"
+
+# More advanced python scripting: gives access to wizards like footprint wizards and creates a python module
+# to edit board files (.kicad_pcb files) outside kicad, by python scripts
+#OPTS="$OPTS -DKICAD_SCRIPTING=ON -DKICAD_SCRIPTING_MODULES=ON"
+
+# Most advanced python scripting: you can execute python scripts inside Pcbnew to edit the current loaded board
+# mainly for advanced users
 #OPTS="$OPTS -DKICAD_SCRIPTING=ON -DKICAD_SCRIPTING_MODULES=ON -DKICAD_SCRIPTING_WXPYTHON=ON"
 
 # Use https under bazaar to retrieve repos because this does not require a