Fix rounding issue when a double is stored in a wxConfig file (wxWidgets 2.9.4...

Fix rounding issue when a double is stored in a wxConfig file (wxWidgets 2.9.4 store only 4 digits in mantissa).
A new inline function ConfigBaseWriteDouble( config, key,  double_value )  is used instead of config->Write(  key, double_value ) which store 12 digits

common/projet_config.cpp

@@ -508,7 +508,11 @@ void PARAM_CFG_INT_WITH_SCALE::SaveParam( wxConfigBase* aConfig ) const
     if( m_Pt_param == NULL || aConfig == NULL )
         return;
 
-    aConfig->Write( m_Ident, *m_Pt_param * m_BIU_to_cfgunit );
+    // We cannot use aConfig->Write for a double, because
+    // this function uses a format with very few digits in mantissa,
+    // and truncature issues are frequent.
+    // We uses our function.
+    ConfigBaseWriteDouble( aConfig, m_Ident, *m_Pt_param * m_BIU_to_cfgunit );
 }
 
 
@@ -617,7 +621,11 @@ void PARAM_CFG_DOUBLE::SaveParam( wxConfigBase* aConfig ) const
     if( m_Pt_param == NULL || aConfig == NULL )
         return;
 
-    aConfig->Write( m_Ident, *m_Pt_param );
+    // We cannot use aConfig->Write for a double, because
+    // this function uses a format with very few digits in mantissa,
+    // and truncature issues are frequent.
+    // We uses our function.
+    ConfigBaseWriteDouble( aConfig, m_Ident, *m_Pt_param );
 }
 
 

include/param_config.h

@@ -14,6 +14,31 @@
 
 
 
+/**
+ * inline ConfigBaseWriteDouble
+ * This is a helper funvtion tor write doubles in config
+ * We cannot use wxConfigBase->Write for a double, because
+ * this function uses a format with very few digits in mantissa,
+ * and truncation issues are frequent.
+ * We use here a better floatting format.
+ *
+ * Note: prior to 2.9.1, the separator was localized, and after, uses
+ * the "C" notation
+ */
+ void inline ConfigBaseWriteDouble( wxConfigBase* aConfig,
+                                    const wxString& aKey, double aValue )
+ {
+    wxString tnumber;
+
+#if wxCHECK_VERSION(2,9,1)
+    tnumber = wxString::FromCDouble( aValue, 12 );
+#else
+    tnumber.Printf( wxT("%12f"), aValue );
+#endif
+    aConfig->Write( aKey, tnumber );
+}
+
+
 /** Type of parameter in the configuration file */
 enum paramcfg_id {
     PARAM_INT,

pcbnew/dialogs/dialog_copper_zones.cpp

@@ -415,21 +415,20 @@ bool DIALOG_COPPER_ZONE::AcceptOptions( bool aPromptForErrors, bool aUseExportab
         m_settings.m_Zone_45_Only = true;
 
     m_settings.m_ThermalReliefGap = ReturnValueFromTextCtrl( *m_AntipadSizeValue );
-
     m_settings.m_ThermalReliefCopperBridge = ReturnValueFromTextCtrl( *m_CopperWidthValue );
 
     if( m_Config )
     {
-        m_Config->Write( ZONE_CLEARANCE_WIDTH_STRING_KEY,
+        ConfigBaseWriteDouble( m_Config, ZONE_CLEARANCE_WIDTH_STRING_KEY,
                                (double) m_settings.m_ZoneClearance / IU_PER_MILS );
 
-        m_Config->Write( ZONE_MIN_THICKNESS_WIDTH_STRING_KEY,
+        ConfigBaseWriteDouble( m_Config, ZONE_MIN_THICKNESS_WIDTH_STRING_KEY,
             (double) m_settings.m_ZoneMinThickness / IU_PER_MILS );
 
-        m_Config->Write( ZONE_THERMAL_RELIEF_GAP_STRING_KEY,
+        ConfigBaseWriteDouble( m_Config, ZONE_THERMAL_RELIEF_GAP_STRING_KEY,
             (double) m_settings.m_ThermalReliefGap / IU_PER_MILS );
 
-        m_Config->Write( ZONE_THERMAL_RELIEF_COPPER_WIDTH_STRING_KEY,
+        ConfigBaseWriteDouble( m_Config, ZONE_THERMAL_RELIEF_COPPER_WIDTH_STRING_KEY,
             (double) m_settings.m_ThermalReliefCopperBridge / IU_PER_MILS );
     }
 

pcbnew/dialogs/dialog_plot.cpp

@@ -627,7 +627,7 @@ void DIALOG_PLOT::applyPlotSettings()
         m_messagesBox->AppendText( msg );
     }
 
-    m_config->Write( OPTKEY_PLOT_X_FINESCALE_ADJ, m_XScaleAdjust );
+   ConfigBaseWriteDouble( m_config, OPTKEY_PLOT_X_FINESCALE_ADJ, m_XScaleAdjust );
 
     // Y scale
     msg = m_fineAdjustYscaleOpt->GetValue();
@@ -641,7 +641,7 @@ void DIALOG_PLOT::applyPlotSettings()
         m_messagesBox->AppendText( msg );
     }
 
-    m_config->Write( OPTKEY_PLOT_Y_FINESCALE_ADJ, m_YScaleAdjust );
+    ConfigBaseWriteDouble( m_config, OPTKEY_PLOT_Y_FINESCALE_ADJ, m_YScaleAdjust );
 
     // PS Width correction
     msg = m_PSFineAdjustWidthOpt->GetValue();
@@ -661,7 +661,8 @@ void DIALOG_PLOT::applyPlotSettings()
     }
 
     // Store m_PSWidthAdjust in mm in user config
-    m_config->Write( CONFIG_PS_FINEWIDTH_ADJ, (double)m_PSWidthAdjust / IU_PER_MM );
+    ConfigBaseWriteDouble( m_config, CONFIG_PS_FINEWIDTH_ADJ,
+                           (double)m_PSWidthAdjust / IU_PER_MM );
 
     tempOptions.SetUseGerberExtensions( m_useGerberExtensions->GetValue() );
 

pcbnew/dialogs/dialog_print_using_printer.cpp

@@ -314,8 +314,10 @@ void DIALOG_PRINT_USING_PRINTER::OnCloseWindow( wxCloseEvent& event )
 
     if( m_config )
     {
-        m_config->Write( OPTKEY_PRINT_X_FINESCALE_ADJ, s_Parameters.m_XScaleAdjust );
-        m_config->Write( OPTKEY_PRINT_Y_FINESCALE_ADJ, s_Parameters.m_YScaleAdjust );
+        ConfigBaseWriteDouble( m_config, OPTKEY_PRINT_X_FINESCALE_ADJ,
+                               s_Parameters.m_XScaleAdjust );
+        ConfigBaseWriteDouble( m_config, OPTKEY_PRINT_Y_FINESCALE_ADJ,
+                               s_Parameters.m_YScaleAdjust );
         m_config->Write( OPTKEY_PRINT_SCALE, m_ScaleOption->GetSelection() );
         m_config->Write( OPTKEY_PRINT_PAGE_FRAME, s_Parameters.m_Print_Sheet_Ref);
         m_config->Write( OPTKEY_PRINT_MONOCHROME_MODE, s_Parameters.m_Print_Black_and_White);

pcbnew/pcbframe.cpp

@@ -61,7 +61,7 @@
 
 // Keys used in read/write config
 #define OPTKEY_DEFAULT_LINEWIDTH_VALUE  wxT( "PlotLineWidth_mm" )
-#define PCB_SHOW_FULL_RATSNET_OPT   wxT( "PcbFulRatsnest" )
+#define PCB_SHOW_FULL_RATSNET_OPT       wxT( "PcbFullRatsnest" )
 #define PCB_MAGNETIC_PADS_OPT           wxT( "PcbMagPadOpt" )
 #define PCB_MAGNETIC_TRACKS_OPT         wxT( "PcbMagTrackOpt" )
 #define SHOW_MICROWAVE_TOOLS            wxT( "ShowMicrowaveTools" )
@@ -313,14 +313,6 @@ PCB_EDIT_FRAME::PCB_EDIT_FRAME( wxWindow* parent, const wxString& title,
 
     m_drc = new DRC( this );        // these 2 objects point to each other
 
-    m_DisplayPcbTrackFill = DisplayOpt.DisplayPcbTrackFill;
-    m_DisplayPadFill = DisplayOpt.DisplayPadFill;
-    m_DisplayViaFill = DisplayOpt.DisplayViaFill;
-    m_DisplayPadNum  = DisplayOpt.DisplayPadNum;
-
-    m_DisplayModEdge = DisplayOpt.DisplayModEdge;
-    m_DisplayModText = DisplayOpt.DisplayModText;
-
     wxIcon  icon;
     icon.CopyFromBitmap( KiBitmap( icon_pcbnew_xpm ) );
     SetIcon( icon );
@@ -333,6 +325,16 @@ PCB_EDIT_FRAME::PCB_EDIT_FRAME( wxWindow* parent, const wxString& title,
     // LoadSettings() *after* creating m_LayersManager, because LoadSettings()
     // initialize parameters in m_LayersManager
     LoadSettings();
+
+    // Be sure options are updated
+    m_DisplayPcbTrackFill = DisplayOpt.DisplayPcbTrackFill;
+    m_DisplayPadFill = DisplayOpt.DisplayPadFill;
+    m_DisplayViaFill = DisplayOpt.DisplayViaFill;
+    m_DisplayPadNum  = DisplayOpt.DisplayPadNum;
+
+    m_DisplayModEdge = DisplayOpt.DisplayModEdge;
+    m_DisplayModText = DisplayOpt.DisplayModText;
+
     SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y );
 
     GetScreen()->AddGrid( m_UserGridSize, m_UserGridUnit, ID_POPUP_GRID_USER );
@@ -592,6 +594,7 @@ void PCB_EDIT_FRAME::LoadSettings()
     long tmp;
     config->Read( PCB_SHOW_FULL_RATSNET_OPT, &tmp );
     GetBoard()->SetElementVisibility(RATSNEST_VISIBLE, tmp);
+
     config->Read( PCB_MAGNETIC_PADS_OPT, &g_MagneticPadOption );
     config->Read( PCB_MAGNETIC_TRACKS_OPT, &g_MagneticTrackOption );
     config->Read( SHOW_MICROWAVE_TOOLS, &m_show_microwave_tools );

pcbnew/pcbnew_config.cpp

@@ -348,6 +348,8 @@ PARAM_CFG_ARRAY& PCB_EDIT_FRAME::GetConfigurationSettings()
                                                    &DisplayOpt.DisplayModText, FILLED, 0, 2 ) );
     m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "PcbAffT" ),
                                                    &DisplayOpt.DisplayDrawItems, FILLED, 0, 2 ) );
+    m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "PcbShowZonesMode" ),
+                                                   &DisplayOpt.DisplayZonesMode, 0, 0, 2 ) );
 
     // Colors:
     m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLay0" ), LOC_COLOR( 0 ),