Skip to content

K
kicad-source-mirror
Commit cc097762 authored by Dick Hollenbeck's avatar Dick Hollenbeck
Browse files
Options

Temporarily reverse out the evolving support for finer Board Internal Units (BIU)s.

parent d4bfa450
Expand all Show whitespace changes
Inline Side-by-side
Showing with 984 additions and 2321 deletions
3d-viewer/3d_draw.cpp
View file @ cc097762
......@@ -884,7 +884,7 @@ void EDGE_MODULE::Draw3D( EDA_3D_CANVAS* glcanvas )
}
}
/** @TODO: move D_PAD method to appropriate file */
/* Draw 3D pads. */
void D_PAD::Draw3D( EDA_3D_CANVAS* glcanvas )
{
......@@ -903,8 +903,8 @@ void D_PAD::Draw3D( EDA_3D_CANVAS* glcanvas )
int color;
scale = g_Parm_3D_Visu.m_BoardScale;
holeX = (double) TO_LEGACY_LU_DBL( m_Drill.x() ) * scale / 2;
holeY = (double) TO_LEGACY_LU_DBL( m_Drill.y() ) * scale / 2;
holeX = (double) m_Drill.x * scale / 2;
holeY = (double) m_Drill.y * scale / 2;
hole = MIN( holeX, holeY );
/* Calculate the center of the pad. */
......@@ -914,12 +914,12 @@ void D_PAD::Draw3D( EDA_3D_CANVAS* glcanvas )
xc = ux0;
yc = uy0;
dx = dx0 = TO_LEGACY_LU( m_Size.x() ) >> 1;
dy = dy0 = TO_LEGACY_LU( m_Size.y() ) >> 1;
dx = dx0 = m_Size.x >> 1;
dy = dy0 = m_Size.y >> 1;
angle = m_Orient;
drillx = TO_LEGACY_LU( m_Pos.x() ) * scale;
drilly = TO_LEGACY_LU( m_Pos.y() ) * scale;
drillx = m_Pos.x * scale;
drilly = m_Pos.y * scale;
/* Draw the pad hole (TODO: draw OBLONG hole) */
if( holeX && holeY )
......@@ -980,13 +980,13 @@ void D_PAD::Draw3D( EDA_3D_CANVAS* glcanvas )
{
delta_cx = dx - dy;
delta_cy = 0;
w = TO_LEGACY_LU( m_Size.y() ) * scale;
w = m_Size.y * scale;
}
else /* Vertical ellipse */
{
delta_cx = 0;
delta_cy = dy - dx;
w = TO_LEGACY_LU( m_Size.x() ) * scale;
w = m_Size.x * scale;
}
RotatePoint( &delta_cx, &delta_cy, angle );
......
CMakeLists.txt
View file @ cc097762
......@@ -29,9 +29,6 @@ option(KICAD_GOST "enable/disable building using GOST notation for multiple gate
#for those who bored with uppercase
option(KICAD_KEEPCASE "turn-off automatic component name conversion to uppercase if selected")
#highly experimetnal option
option(KICAD_NANOMETRE "set length quantum to 1 nm for PCB")
option(USE_WX_GRAPHICS_CONTEXT
"Use wxGraphicsContext for rendering (default OFF). Warning, this is experimental")
......@@ -102,10 +99,6 @@ if(KICAD_KEEPCASE)
add_definitions(-DKICAD_KEEPCASE)
endif(KICAD_KEEPCASE)
if(KICAD_NANOMETRE)
add_definitions(-DKICAD_NANOMETRE)
endif(KICAD_NANOMETRE)
if(USE_WX_OVERLAY OR APPLE)
add_definitions(-DUSE_WX_OVERLAY)
endif(USE_WX_OVERLAY OR APPLE)
......
bitmap2component/bitmap2component.cpp
View file @ cc097762
......@@ -37,6 +37,13 @@
#include "auxiliary.h"
#ifndef max
#define max( a, b ) ( ( (a) > (b) ) ? (a) : (b) )
#endif
#ifndef min
#define min( a, b ) ( ( (a) < (b) ) ? (a) : (b) )
#endif
// Define some types used here from boost::polygon
namespace bpl = boost::polygon; // bpl = boost polygon library
using namespace bpl::operators; // +, -, =, ...
......@@ -469,7 +476,7 @@ void BezierToPolyline( std::vector <potrace_dpoint_t>& aCornersBuffer,
* occur at an endpoint. */
dd0 = sq( p1.x - 2 * p2.x + p3.x ) + sq( p1.y - 2 * p2.y + p3.y );
dd1 = sq( p2.x - 2 * p3.x + p4.x ) + sq( p2.y - 2 * p3.y + p4.y );
dd = 6 * sqrt( fmax( dd0, dd1 ) );
dd = 6 * sqrt( max( dd0, dd1 ) );
e2 = 8 * delta <= dd ? 8 * delta / dd : 1;
epsilon = sqrt( e2 ); /* necessary interval size */
......
common/basicframe.cpp
View file @ cc097762
......@@ -518,20 +518,6 @@ void EDA_BASE_FRAME::CopyVersionInfoToClipboard( wxCommandEvent& event )
tmp << wxT( "OFF\n" );
#endif
tmp << wxT( " KICAD_NANOMETRE=" );
#ifdef KICAD_NANOMETRE
tmp << wxT( "ON\n" );
#else
tmp << wxT( "OFF\n" );
#endif
tmp << wxT( " KICAD_KEEPCASE=" );
#ifdef KICAD_KEEPCASE
tmp << wxT( "ON\n" );
#else
tmp << wxT( "OFF\n" );
#endif
tmp << wxT( " USE_WX_GRAPHICS_CONTEXT=" );
#ifdef USE_WX_GRAPHICS_CONTEXT
tmp << wxT( "ON\n" );
......
common/common.cpp
View file @ cc097762
......@@ -410,193 +410,50 @@ int ReturnValueFromString( EDA_UNITS_T aUnit, const wxString& TextValue, int Int
}
#ifdef KICAD_NANOMETRE
/*
*New common length functions
/**
* Function wxStringSplit
* Split a String to a String List when founding 'splitter'
* @return the list
* @param txt : wxString : a String text
* @param splitter : wxChar : the 'split' character
*/
const LENGTH_UNIT_DESC MillimetreDesc =
{
LENGTH_UNITS<LENGTH_PCB>::millimetre(),
wxT( "mm" ),
6
};
const LENGTH_UNIT_DESC InchDesc =
{
LENGTH_UNITS<LENGTH_PCB>::inch(),
wxT( "\"" ),
7
};
const LENGTH_UNIT_DESC MilDesc =
{
LENGTH_UNITS<LENGTH_PCB>::mil(),
wxT( "mil" ),
5
};
const LENGTH_UNIT_DESC UnscaledDesc = /* stub */
{
LENGTH_PCB::quantum(),
wxT( "" ),
4
};
const LENGTH_UNIT_DESC *UnitDescription( EDA_UNITS_T aUnit ) {
switch(aUnit) {
case INCHES:
return &InchDesc;
case MILLIMETRES:
return &MillimetreDesc;
default:
return &UnscaledDesc; /* should not be reached */
}
}
/* TODO: localisation */
wxString LengthToString( const LENGTH_UNIT_DESC *aUnit, LENGTH_PCB aValue,
bool aAdd_unit_symbol ) {
wxString StringValue;
double value_to_print;
value_to_print = LENGTH<double>(aValue) / LENGTH<double>(aUnit->m_Value);
StringValue.Printf( wxT( "%.*f" ), aUnit->m_Precision, value_to_print);
size_t zero_tail = StringValue.find_last_not_of( wxT( "0" ) );
if( zero_tail != std::string::npos )
{
//fprintf( stderr, "pos : %d", (int) zero_tail );
size_t delim_pos = StringValue.Length() - aUnit->m_Precision;
if( zero_tail < delim_pos)
zero_tail = delim_pos;
StringValue.Truncate( zero_tail + 1 );
}
if( aAdd_unit_symbol && aUnit->m_Symbol != wxT( "" ) )
{
StringValue += wxT( " " );
StringValue += wxGetTranslation( aUnit->m_Symbol );
}
return StringValue;
}
LENGTH_PCB StringToLength( const LENGTH_UNIT_DESC *aUnit, const wxString& TextValue )
{
LENGTH_PCB Value;
double dtmp = 0;
/* Acquire the 'right' decimal point separator */
const struct lconv* lc = localeconv();
wxChar decimal_point = lc->decimal_point[0];
wxString buf( TextValue.Strip( wxString::both ) );
/* Convert the period in decimal point */
buf.Replace( wxT( "." ), wxString( decimal_point, 1 ) );
// An ugly fix needed by WxWidgets 2.9.1 that sometimes
// back to a point as separator, although the separator is the comma
// TODO: remove this line if WxWidgets 2.9.2 fixes this issue
buf.Replace( wxT( "," ), wxString( decimal_point, 1 ) );
/* Find the end of the numeric part */
unsigned brk_point = 0;
while( brk_point < buf.Len() )
{
wxChar ch = buf[brk_point];
if( !( (ch >= '0' && ch <='9') || (ch == decimal_point)
|| (ch == '-') || (ch == '+') ) )
{
break;
}
++brk_point;
}
/* Extract the numeric part */
buf.Left( brk_point ).ToDouble( &dtmp );
/* Check the optional unit designator (2 ch significant) */
wxString unit( buf.Mid( brk_point ).Strip( wxString::leading ).Left( 2 ).Lower() );
if( unit == wxT( "in" ) || unit == wxT( "\"" ) )
{
aUnit = &InchDesc;
}
else if( unit == wxT( "mm" ) )
{
aUnit = &MillimetreDesc;
}
else if( unit == wxT( "mi" ) || unit == wxT( "th" ) ) /* Mils or thous */
{
aUnit = &MilDesc;
}
Value = LENGTH_PCB( dtmp * LENGTH< double, 1 >( aUnit->m_Value ) );
return Value;
}
void LengthToTextCtrl( wxTextCtrl& TextCtr, LENGTH_PCB Value )
{
wxString msg = LengthToString( UnitDescription( g_UserUnit ), Value );
TextCtr.SetValue( msg );
}
LENGTH_PCB LengthFromTextCtrl( const wxTextCtrl& TextCtr )
{
LENGTH_PCB value;
wxString msg = TextCtr.GetValue();
value = StringToLength( UnitDescription( g_UserUnit ), msg );
return value;
}
#endif
wxArrayString* wxStringSplit( wxString aString, wxChar aSplitter )
wxArrayString* wxStringSplit( wxString txt, wxChar splitter )
{
wxArrayString* list = new wxArrayString();
while( 1 )
{
int index = aString.Find( aSplitter );
int index = txt.Find( splitter );
if( index == wxNOT_FOUND )
break;
wxString tmp;
tmp = aString.Mid( 0, index );
aString = aString.Mid( index + 1, aString.size() - index );
tmp = txt.Mid( 0, index );
txt = txt.Mid( index + 1, txt.size() - index );
list->Add( tmp );
}
if( !aString.IsEmpty() )
if( !txt.IsEmpty() )
{
list->Add( aString );
list->Add( txt );
}
return list;
}
/**
* Function To_User_Unit
* Convert in inch or mm the variable "val" (double)given in internal units
* @return the converted value, in double
* @param aUnit : user measure unit
* @param val : double : the given value
* @param internal_unit_value = internal units per inch
*/
double To_User_Unit( EDA_UNITS_T aUnit, double val, int internal_unit_value )
{
switch( aUnit )
{
case MILLIMETRES:
......@@ -611,6 +468,9 @@ double To_User_Unit( EDA_UNITS_T aUnit, double val, int internal_unit_value )
}
/*
* Return in internal units the value "val" given in inch or mm
*/
int From_User_Unit( EDA_UNITS_T aUnit, double val, int internal_unit_value )
{
double value;
......@@ -627,6 +487,7 @@ int From_User_Unit( EDA_UNITS_T aUnit, double val, int internal_unit_value )
default:
case UNSCALED_UNITS:
value = val;
}
......@@ -634,6 +495,9 @@ int From_User_Unit( EDA_UNITS_T aUnit, double val, int internal_unit_value )
}
/*
* Return the string date "day month year" like "23 jun 2005"
*/
wxString GenDate()
{
static const wxString mois[12] =
......@@ -647,6 +511,7 @@ wxString GenDate()
wxString string_date;
time( &buftime );
Date = gmtime( &buftime );
string_date.Printf( wxT( "%d %s %d" ), Date->tm_mday,
GetChars( mois[Date->tm_mon] ),
......
common/projet_config.cpp
View file @ cc097762
......@@ -802,85 +802,3 @@ void PARAM_CFG_LIBNAME_LIST::SaveParam( wxConfigBase* aConfig )
aConfig->Write( configkey, libname );
}
}
/*
* LENGTH_PCB
*/
PARAM_CFG_LENGTH_PCB::PARAM_CFG_LENGTH_PCB( const wxChar* ident,
LENGTH_PCB* ptparam,
LENGTH_PCB default_val,
LENGTH_PCB min,
LENGTH_PCB max,
const wxChar* group ) :
PARAM_CFG_BASE( ident, PARAM_DOUBLE, group )
{
m_Pt_param = ptparam;
m_Default = default_val;
m_Min = min;
m_Max = max;
}
PARAM_CFG_LENGTH_PCB::PARAM_CFG_LENGTH_PCB( bool Insetup,
const wxChar* ident,
LENGTH_PCB* ptparam,
LENGTH_PCB default_val,
LENGTH_PCB min,
LENGTH_PCB max,
const wxChar* group ) :
PARAM_CFG_BASE( ident, PARAM_DOUBLE, group )
{
m_Pt_param = ptparam;
m_Default = default_val;
m_Min = min;
m_Max = max;
m_Setup = Insetup;
}
/** ReadParam
* read the value of parameter this stored in aConfig
* @param aConfig = the wxConfigBase that store the parameter
*/
void PARAM_CFG_LENGTH_PCB::ReadParam( wxConfigBase* aConfig )
{
if( m_Pt_param == NULL || aConfig == NULL )
return;
LENGTH_PCB ftmp;
wxString msg;
msg = aConfig->Read( m_Ident, wxT( "" ) );
if( msg.IsEmpty() )
{
ftmp = m_Default;
}
else
{
double t;
msg.ToDouble( &t );
ftmp = FROM_LEGACY_LU( t );
if( (ftmp < m_Min) || (ftmp > m_Max) )
ftmp = m_Default;
}
*m_Pt_param = ftmp;
}
/** SaveParam
* save the the value of parameter this stored in aConfig
* @param aConfig = the wxConfigBase that can store the parameter
*/
void PARAM_CFG_LENGTH_PCB::SaveParam( wxConfigBase* aConfig )
{
if( m_Pt_param == NULL || aConfig == NULL )
return;
#ifdef KICAD_NANOMETRE
aConfig->Write( m_Ident, TO_LEGACY_LU_DBL( *m_Pt_param ) );
#else // save it as int to mantain compatibility while in transition to nanoscale
aConfig->Write( m_Ident, TO_LEGACY_LU( *m_Pt_param ) );
#endif
}
gerbview/class_gerber_draw_item.h
View file @ cc097762
......@@ -167,15 +167,11 @@ public:
* @return const wxPoint& - The position of this object.
* This function exists mainly to satisfy the virtual GetPosition() in parent class
*/
const wxPoint GetPosition() const
wxPoint& GetPosition()
{
return m_Start; // it had to be start or end.
}
void SetPosition( const wxPoint& pos ) {
m_Start = pos;
}
/**
* Function GetABPosition
* returns the image position of aPosition for this object.
......
include/class_board_design_settings.h
View file @ cc097762
......@@ -7,10 +7,6 @@
#include "pcbstruct.h" // NB_COLORS
#include "lengthpcb.h"
#include "class_via_dimension.h"
// Class for handle current printed board design settings
class BOARD_DESIGN_SETTINGS
{
......@@ -26,14 +22,11 @@ public:
int m_EdgeSegmentWidth; // current graphic line width (EDGE layer only)
int m_PcbTextWidth; // current Pcb (not module) Text width
wxSize m_PcbTextSize; // current Pcb (not module) Text size
LENGTH_PCB m_TrackMinWidth; // track min value for width ((min copper size value
VIA_DIMENSION m_MinVia;
VIA_DIMENSION m_MinMicroVia;
//LENGTH_PCB m_ViasMinSize; // vias (not micro vias) min diameter
//LENGTH_PCB m_ViasMinDrill; // vias (not micro vias) min drill diameter
//LENGTH_PCB m_MicroViasMinSize; // micro vias (not vias) min diameter
//LENGTH_PCB m_MicroViasMinDrill; // micro vias (not vias) min drill diameter
int m_TrackMinWidth; // track min value for width ((min copper size value
int m_ViasMinSize; // vias (not micro vias) min diameter
int m_ViasMinDrill; // vias (not micro vias) min drill diameter
int m_MicroViasMinSize; // micro vias (not vias) min diameter
int m_MicroViasMinDrill; // micro vias (not vias) min drill diameter
// Global mask margins:
int m_SolderMaskMargin; // Solder mask margin
......
include/class_board_item.h
View file @ cc097762
......@@ -76,19 +76,9 @@ public:
/**
* Function GetPosition
* returns the position of this object.
* @return wxPoint - The position of this object
* It seems this function could not return modifiable reference as this
* contradict good design practice: as the class could be able
* doing internal recalculations on reposition.
* @TODO: Check all the GetPosition calls for position assignments.
* @return wxPoint& - The position of this object, non-const so it can be changed
*/
virtual const wxPoint GetPosition() const = 0;
/**
* Sets the position of this object.
* @param pos The position of this object
*/
virtual void SetPosition( const wxPoint& pos ) = 0;
virtual wxPoint& GetPosition() = 0;
/**
* Function GetLayer
......@@ -323,9 +313,10 @@ public:
{}
//-----< satisfy some virtual functions >------------------------------
const wxPoint GetPosition() const
wxPoint& GetPosition()
{
return wxPoint(0, 0);
static wxPoint dummy;
return dummy;
}
void Draw( EDA_DRAW_PANEL* DrawPanel, wxDC* DC,
......
include/class_via_dimension.h
View file @ cc097762
......@@ -22,11 +22,6 @@ public:
m_Drill = FROM_LEGACY_LU( 0 );
}
VIA_DIMENSION( LENGTH_PCB diam, LENGTH_PCB drill )
{
m_Diameter = diam;
m_Drill = drill;
}
bool operator ==( const VIA_DIMENSION& other ) const
{
......
include/common.h
View file @ cc097762
......@@ -2,6 +2,7 @@
* This program source code file is part of KiCad, a free EDA CAD application.
*
* Copyright (C) 2004 Jean-Pierre Charras, jaen-pierre.charras@gipsa-lab.inpg.com
* Copyright (C) 2007-2011 SoftPLC Corporation, Dick Hollenbeck <dick@softplc.com>
* Copyright (C) 2008-2011 Wayne Stambaugh <stambaughw@verizon.net>
* Copyright (C) 1992-2011 KiCad Developers, see AUTHORS.txt for contributors.
*
......@@ -28,18 +29,13 @@
* @file common.h
*/
#ifndef __INCLUDE__COMMON_H__
#define __INCLUDE__COMMON_H__ 1
#ifndef INCLUDE__COMMON_H_
#define INCLUDE__COMMON_H_
#include "wx/wx.h"
#include "wx/confbase.h"
#include "wx/fileconf.h"
#ifdef KICAD_NANOMETRE
#include "lengthpcb.h"
#endif
class wxAboutDialogInfo;
class BASE_SCREEN;
class EDA_DRAW_FRAME;
......@@ -363,85 +359,27 @@ wxString ReturnStringFromValue( EDA_UNITS_T aUnit,
int aInternal_Unit,
bool aAdd_unit_symbol = false );
/**
* Function AddUnitSymbol
* adds string " (mm):" or " ("):" to the static text Stext.
* Used in dialog boxes for entering values depending on selected units
*/
void AddUnitSymbol( wxStaticText& Stext, EDA_UNITS_T aUnit = g_UserUnit );
/* Add string " (mm):" or " ("):" to the static text Stext.
* Used in dialog boxes for entering values depending on selected units */
void PutValueInLocalUnits( wxTextCtrl& TextCtr, int Value, int Internal_Unit );
void PutValueInLocalUnits( wxTextCtrl& TextCtr, int Value,
int Internal_Unit );
/**
* Convert the number Value in a string according to the internal units
/* Convert the number Value in a string according to the internal units
* and the selected unit (g_UserUnit) and put it in the wxTextCtrl TextCtrl
*/
int ReturnValueFromTextCtrl( const wxTextCtrl& TextCtr, int Internal_Unit );
#ifdef KICAD_NANOMETRE
struct LENGTH_UNIT_DESC
{
LENGTH_PCB m_Value;
const wxString m_Symbol;
int m_Precision;
};
extern const LENGTH_UNIT_DESC MillimetreDesc, InchDesc, MilDesc;
const LENGTH_UNIT_DESC *UnitDescription( EDA_UNITS_T aUnit );
LENGTH_PCB StringToLength( const LENGTH_UNIT_DESC *aUnit, const wxString& TextValue );
wxString LengthToString( const LENGTH_UNIT_DESC *aUnit, LENGTH_PCB aValue,
bool aAdd_unit_symbol = false );
void LengthToTextCtrl( wxTextCtrl& TextCtr, LENGTH_PCB Value );
LENGTH_PCB LengthFromTextCtrl( const wxTextCtrl& TextCtr );
/* transition macros */
#define STR_TO_LENGTH( unit, str, iu ) \
( StringToLength( UnitDescription( ( unit ) ), ( str ) ) )
#define LENGTH_TO_STR( unit, l, iu ) \
( LengthToString( UnitDescription( ( unit ) ), ( l ) ) )
#define LENGTH_TO_STR_SYM( unit, l, iu ) \
( LengthToString( UnitDescription( ( unit ) ), ( l ), true ) )
#define CTR_GET_LENGTH( ctr, iu ) \
( StringToLength( UnitDescription( g_UserUnit ), ( ctr ).GetValue() ) )
#define CTR_PUT_LENGTH( ctr, l, iu ) \
( ( ctr ).SetValue( LengthToString( UnitDescription( g_UserUnit ), ( l ) ) ) )
#else
#define STR_TO_LENGTH( unit, str, iu ) \
ReturnValueFromString( ( unit ), ( str ), ( iu ) )
#define LENGTH_TO_STR( unit, l, iu ) \
( ReturnStringFromValue( ( unit ), ( l ), ( iu ) ) )
#define LENGTH_TO_STR_SYM( unit, l, iu ) \
( ReturnStringFromValue( ( unit ), ( l ), ( iu ), true ) )
#define CTR_GET_LENGTH( ctr, iu ) \
ReturnValueFromString( g_UserUnit, ( ctr ).GetValue(), ( iu ) )
#define CTR_PUT_LENGTH( ctr, l, iu ) \
( ( ctr ).SetValue( ReturnStringFromValue( g_UserUnit, ( l ), ( iu ) ) ) )
#endif
**/
int ReturnValueFromTextCtrl( const wxTextCtrl& TextCtr,
int Internal_Unit );
/**
* Function wxStringSplit
* splita \a aString to a string list when split by \a aSplitter.
* splits \a aString to a string list separated at \a aSplitter.
* @return the list
* @param aString : wxString : a String text
* @param aSplitter : wxChar : the 'split' character
* @param aString is the text to split
* @param aSplitter is the 'split' character
*/
wxArrayString* wxStringSplit( wxString aString, wxChar aSplitter );
wxArrayString* wxStringSplit( wxString txt, wxChar aSplitter );
/**
* Function To_User_Unit
......@@ -449,11 +387,12 @@ wxArrayString* wxStringSplit( wxString aString, wxChar aSplitter );
* @return the converted value, in double
* @param aUnit : user unit to be converted to
* @param val : double : the given value
* @param internal_unit_value = internal units per inch
*/
double To_User_Unit( EDA_UNITS_T aUnit, double val, int internal_unit_value );
/*
/**
* Return in internal units the value "val" given in inch or mm
*/
int From_User_Unit( EDA_UNITS_T aUnit, double val, int internal_unit_value );
......@@ -465,4 +404,4 @@ int From_User_Unit( EDA_UNITS_T aUnit, double val, int internal_unit_value );
*/
wxString GenDate();
#endif // __INCLUDE__COMMON_H__
#endif // INCLUDE__COMMON_H_
include/length.h
View file @ cc097762
This diff is collapsed.
include/lengthpcb.h deleted 100644 → 0
View file @ d4bfa450
/**
* @file lengthpcb.h
* @brief Length definitions for PCBNEW.
*/
#ifndef LENGTHPCB_H_INCLUDED
#define LENGTHPCB_H_INCLUDED 1
#ifdef KICAD_NANOMETRE
#include "length.h"
#include "limited_int.h"
/* switched type! */
typedef LENGTH< LIMITED_INT< int >, 1 > LENGTH_PCB;
typedef LENGTH< double, 1 > LENGTH_PCB_DBL;
/* Transition macros. they are used for unit conversion between
* nanometre scale and old (0.1 mil) scale */
#define PCB_LEGACY_INCH_SCALE 10000
#define PCB_LEGACY_UNIT( T ) ( LENGTH_UNITS< T >::inch() / PCB_LEGACY_INCH_SCALE )
#define TO_LEGACY_LU( x ) \
( (int) ( LENGTH_PCB( x ) / PCB_LEGACY_UNIT( LENGTH_PCB ) ) )
#define TO_LEGACY_LU_DBL( x ) \
( (double) ( LENGTH_PCB_DBL( x ) / PCB_LEGACY_UNIT( LENGTH_PCB_DBL ) ) )
#ifdef __GNUC__
#define NOT_USED __attribute__ ((unused))
#else
#define NOT_USED
#endif
static LENGTH_PCB NOT_USED from_legacy_lu( int x )
{
return x * PCB_LEGACY_UNIT( LENGTH_PCB );
}
static LENGTH_PCB NOT_USED from_legacy_lu( long x )
{
return x * PCB_LEGACY_UNIT( LENGTH_PCB );
}
static LENGTH_PCB NOT_USED from_legacy_lu( double x )
{
return LENGTH_PCB( x * PCB_LEGACY_UNIT( LENGTH_PCB_DBL ) );
}
static LENGTH_PCB_DBL NOT_USED from_legacy_lu_dbl( double x )
{
return x * LENGTH_UNITS< LENGTH_PCB_DBL >::inch() / PCB_LEGACY_INCH_SCALE;
}
#undef NOT_USED
#define FROM_LEGACY_LU( x ) ( from_legacy_lu( x ) )
#define FROM_LEGACY_LU_DBL( x ) ( from_legacy_lu_dbl( x ) )
#define ZERO_LENGTH ( LENGTH_PCB::zero() )
/* SAVE FILE macros */
#define FM_LENSV "%lf" ///< format specifier for saving
#define ARG_LENSV( x ) TO_LEGACY_LU_DBL( x ) ///< argument for saving
#else
typedef int LENGTH_PCB;
typedef double LENGTH_PCB_DBL;
/* transition macro stubs */
#define TO_LEGACY_LU( x ) ( x )
#define TO_LEGACY_LU_DBL( x ) ( double( x ) )
#define FROM_LEGACY_LU( x ) ( x )
#define FROM_LEGACY_LU_DBL( x ) ( double( x ) )
#define ZERO_LENGTH 0
/* SAVE FILE macros */
/** @TODO: after transition process this could be wrapped in some class */
#define FM_LENSV "%d"
#define ARG_LENSV( x ) ( (int)( x ) )
#endif
/* LOAD FILE macros */
#define FM_LENLD "%lf" ///< scanf format macro for loading
#define ARG_LENLD_TYPE double ///< tmp variable for length read
// they're set to flat type to help the transition process
// there would be some period while program gain ability to
// load float data but not acually save it
#define LENGTH_LOAD_TMP( x ) ( FROM_LEGACY_LU( x ) ) ///< reads tmp value from above
#define LENGTH_LOAD_STR( s ) ( FROM_LEGACY_LU( atof( s ) ) ) ///< reads string
/* used fo loading/saving config */
#define LENGTH_MAX_CONFIG ( FROM_LEGACY_LU( 393700 ) )
#endif /* def LENGTHPCB_H_INCLUDED */
include/limited_int.h deleted 100644 → 0
View file @ d4bfa450
/**
* @file limited_int.h
* @brief Integer class catching overflows.
*/
/* sorry if it is not styled correctly, i'll work on it further */
#ifndef LIMITED_INT_H_INCLUDED
#define LIMITED_INT_H_INCLUDED 1
#include <limits>
#include <assert.h>
#include <math.h>
template < typename T = int > class LIMITED_INT {
private:
T m_Value;
public:
LIMITED_INT( void ) : m_Value() {
}
template<typename V> LIMITED_INT( const LIMITED_INT< V >& orig )
: m_Value( orig.m_Value )
{
assert(std::numeric_limits<T>::min() <= orig.m_Value);
assert(orig.m_Value <= std::numeric_limits<T>::max());
}
template<typename V> LIMITED_INT( const double v )
: m_Value( floor(v+0.5) )
{
assert(std::numeric_limits<T>::min() <= v);
assert(v <= std::numeric_limits<T>::max());
}
LIMITED_INT( T v ): m_Value( v )
{
}
operator T( void ) const
{
return m_Value;
}
operator double( void ) const
{
return ( double )m_Value;
}
LIMITED_INT<T> & operator = ( LIMITED_INT< T > src )
{
m_Value = src.m_Value;
return *this;
}
LIMITED_INT<T> & operator = ( T src )
{
m_Value = src;
return *this;
}
/*************************/
/* comparisons and tests */
/*************************/
bool operator ! (void) const {
return !m_Value;
}
bool operator == ( const LIMITED_INT< T > &y ) const
{
return m_Value == y.m_Value;
}
bool operator == ( const T y ) const
{
return m_Value == y;
}
friend bool operator == ( const T x, const LIMITED_INT< T > &y )
{
return x == y.m_Value;
}
bool operator != ( const LIMITED_INT<T> &y ) const
{
return m_Value != y.m_Value;
}
bool operator != ( const T y ) const
{
return m_Value != y;
}
friend bool operator != ( const T x, const LIMITED_INT< T > &y )
{
return x != y.m_Value;
}
bool operator < ( const LIMITED_INT< T > &y ) const
{
return m_Value < y.m_Value;
}
bool operator < ( const T y ) const
{
return m_Value < y;
}
friend bool operator < ( const T x, const LIMITED_INT< T > &y )
{
return x < y.m_Value;
}
bool operator >= ( const LIMITED_INT< T > &y ) const
{
return m_Value >= y.m_Value;
}
bool operator >= ( const T y ) const
{
return m_Value >= y;
}
friend bool operator >= ( const T x, const LIMITED_INT<T> &y )
{
return x >= y.m_Value;
}
bool operator > ( const LIMITED_INT< T > &y ) const
{
return m_Value > y.m_Value;
}
bool operator > ( const T y ) const
{
return m_Value > y;
}
friend bool operator > ( const T x, const LIMITED_INT< T > &y )
{
return x > y.m_Value;
}
bool operator <= ( const LIMITED_INT< T > &y ) const
{
return m_Value <= y.m_Value;
}
bool operator <= ( const T y ) const
{
return m_Value <= y;
}
friend bool operator <= ( const T x, const LIMITED_INT< T > &y )
{
return x <= y.m_Value;
}
/*************************/
/* basic arithmetic */
/*************************/
LIMITED_INT< T > operator + ( const LIMITED_INT< T > &y ) const
{
assert( !( 0 < m_Value ) || y.m_Value <= std::numeric_limits< T >::max() - m_Value );
assert( !( m_Value < 0 ) || std::numeric_limits< T >::min() - m_Value <= y.m_Value );
return m_Value + y.m_Value;
}
LIMITED_INT< T > operator + ( const T y ) const
{
return *this + LIMITED_INT< T >( y );
}
friend LIMITED_INT< T > operator + ( const T x, const LIMITED_INT< T > &y )
{
return LIMITED_INT< T >( x ) + y;
}
double operator + ( const double y ) const
{
return double( m_Value ) + y;
}
friend double operator + ( const double x, const LIMITED_INT< T > &y )
{
return x + double( y.m_Value );
}
LIMITED_INT< T > operator - ( void ) const
{
assert( -std::numeric_limits< T >::max() <= m_Value );
return -m_Value;
}
LIMITED_INT< T > operator - ( const LIMITED_INT< T > &y ) const
{
assert( !( 0 < m_Value ) || m_Value - std::numeric_limits< T >::max() <= y.m_Value );
assert( !( m_Value < 0 ) || y.m_Value <= m_Value - std::numeric_limits< T >::min() );
return m_Value - y.m_Value;
}
LIMITED_INT< T > operator - ( const T y ) const
{
return *this - LIMITED_INT< T >( y );
}
friend LIMITED_INT< T > operator - ( const T x, const LIMITED_INT< T > &y )
{
return LIMITED_INT< T >( x ) - y;
}
double operator - ( const double y ) const
{
return double( m_Value ) - y;
}
friend double operator - ( const double x, const LIMITED_INT< T > &y )
{
return x - double( y.m_Value );
}
LIMITED_INT< T > operator * ( const LIMITED_INT< T > &y ) const
{
assert( !( 0 < m_Value && 0 < y.m_Value )
|| y.m_Value <= std::numeric_limits<T>::max() / m_Value );
assert( !( 0 < m_Value && y.m_Value < 0 )
|| std::numeric_limits<T>::min() / m_Value <= y.m_Value );
assert( !( m_Value < 0 && 0 < y.m_Value )
|| std::numeric_limits<T>::min() / y.m_Value <= m_Value );
assert( !( m_Value < 0 && y.m_Value < 0 )
|| std::numeric_limits<T>::max() / m_Value <= y.m_Value );
return m_Value * y.m_Value;
}
LIMITED_INT<T> operator * ( const T y) const
{
return *this * LIMITED_INT< T >( y );
}
friend LIMITED_INT< T > operator *( const T x, const LIMITED_INT< T > &y )
{
return LIMITED_INT< T >( x ) * y;
}
double operator * ( const double y ) const
{
return double( m_Value ) * y;
}
friend double operator * ( const double x, const LIMITED_INT< T > &y )
{
return x * double( y.m_Value );
}
LIMITED_INT<T> operator / ( const LIMITED_INT<T> &y ) const
{
assert( !( -1 == y.m_Value )
|| -std::numeric_limits< T >::max() <= m_Value );
return m_Value / y.m_Value;
}
LIMITED_INT<T> operator / ( const T y ) const
{
return *this / LIMITED_INT<T>(y);
}
friend LIMITED_INT< T > operator / ( const T x, const LIMITED_INT< T > &y )
{
return LIMITED_INT< T >( x ) / y;
}
double operator / ( const double y ) const
{
return double( m_Value ) / y;
}
friend double operator / ( const double x, const LIMITED_INT< T > &y )
{
return x / double( y.m_Value );
}
LIMITED_INT<T> operator % ( const LIMITED_INT<T> &y ) const
{
return m_Value % y.m_Value;
}
LIMITED_INT<T> operator % ( const T y ) const
{
return *this % LIMITED_INT<T>(y);
}
friend LIMITED_INT< T > operator % ( const T x, const LIMITED_INT< T > &y )
{
return LIMITED_INT< T >( x ) % y;
}
LIMITED_INT< T >& operator += ( const LIMITED_INT< T > &y )
{
*this = *this + y;
return *this;
}
LIMITED_INT< T >& operator += ( const T y )
{
*this = *this + y;
return *this;
}
LIMITED_INT< T >& operator ++ ( void )
{
*this = *this + 1;
return *this;
}
LIMITED_INT< T >& operator -= ( const LIMITED_INT< T > &y )
{
*this = *this - y;
return *this;
}
LIMITED_INT< T >& operator -= ( const T y )
{
*this = *this - y;
return *this;
}
LIMITED_INT< T >& operator -- ( void )
{
*this = *this - 1;
return *this;
}
LIMITED_INT< T >& operator *= ( const LIMITED_INT< T > &y )
{
*this = *this * y;
return *this;
}
LIMITED_INT< T >& operator *= ( const T y )
{
*this = *this * y;
return *this;
}
LIMITED_INT< T >& operator /= ( const LIMITED_INT< T > &y )
{
*this = *this / y;
return *this;
}
LIMITED_INT< T >& operator /= ( const T y )
{
*this = *this / y;
return *this;
}
};
#endif /* def LIMITED_INT_H_INCLUDED*/
include/macros.h
View file @ cc097762
......@@ -65,8 +65,7 @@ static inline const wxChar* GetChars( const wxString& s )
#endif
#ifndef ABS
#define ABS( y ) ( MAX( ( y ), ( -y ) ) )
// dirty trick: now this should work with LENGTH<> too
#define ABS( y ) ( (y) >= 0 ? (y) : ( -(y) ) )
#endif
#define NEGATE( x ) (x = -x)
......
include/param_config.h
View file @ cc097762
......@@ -10,7 +10,6 @@
#include "wx/fileconf.h"
#include <boost/ptr_container/ptr_vector.hpp>
#include "lengthpcb.h"
/** Type of parameter in the configuration file */
enum paramcfg_id {
......@@ -86,35 +85,6 @@ public: PARAM_CFG_INT( const wxChar* ident, int* ptparam,
virtual void SaveParam( wxConfigBase* aConfig );
};
/**
* Configuration parameter - Length PCB Class
*
*/
class PARAM_CFG_LENGTH_PCB : public PARAM_CFG_BASE
{
public:
LENGTH_PCB * m_Pt_param; ///< Pointer to the parameter value
LENGTH_PCB m_Min, m_Max; ///< Minimum and maximum values of the param type
LENGTH_PCB m_Default; ///< The default value of the parameter
public:
PARAM_CFG_LENGTH_PCB( const wxChar* ident, /// @TODO: remove hardcoded constants
LENGTH_PCB* ptparam,
LENGTH_PCB default_val = ZERO_LENGTH,
LENGTH_PCB min = -LENGTH_MAX_CONFIG,
LENGTH_PCB max = LENGTH_MAX_CONFIG,
const wxChar* group = NULL );
PARAM_CFG_LENGTH_PCB( bool Insetup,
const wxChar* ident,
LENGTH_PCB* ptparam,
LENGTH_PCB default_val = ZERO_LENGTH,
LENGTH_PCB min = -LENGTH_MAX_CONFIG,
LENGTH_PCB max = LENGTH_MAX_CONFIG,
const wxChar* group = NULL );
virtual void ReadParam( wxConfigBase* aConfig );
virtual void SaveParam( wxConfigBase* aConfig );
};
/**
* Configuration parameter - SetColor Class
......
include/vectorpcb.h deleted 100644 → 0
View file @ d4bfa450
/**
* @file vectorpcb.h
* @brief Planar vector definitions for PCBNEW.
*/
#ifndef VECTORPCB_H_INCLUDED
#define VECTORPCB_H_INCLUDED 1
/// @TODO: nice template and refiling for it
class VECTOR_PCB
{
public:
LENGTH_PCB data[2];
/** A vector from pair of coords. Constructor is avoided in favor to POD-like object.
*/
static VECTOR_PCB fromXY( LENGTH_PCB x, LENGTH_PCB y )
{
VECTOR_PCB z = { { x, y } };
return z;
}
/** @defgroup vector-elements Access individual attributes
* @{
*/
LENGTH_PCB &operator[]( int i )
{
return data[i];
}
const LENGTH_PCB &operator[]( int i ) const
{
return data[i];
}
/** @} */
/** @defgroup vector-cartesian Access to cartesian coordinates
* Definitions follow the agreement:
* - methods are named exactly as attributes, thus setter and getter have same name;
* - all methods (setters and getterrs) return actual attribute value;
* - method without argument gets the attribute;
* - method with argument sets it to argument value.
* These methods different than operator[]
* because vector actually may have any storage layout,
* so cartesian coords may be calculated rahter than actually stored.
* E. g. homogeneous coordinates is likely to be used in perspective.
* @{
*/
const LENGTH_PCB x() const
{
return data[0];
}
const LENGTH_PCB x( LENGTH_PCB nx )
{
return data[0] = nx;
}
const LENGTH_PCB y() const
{
return data[1];
}
const LENGTH_PCB y( LENGTH_PCB ny )
{
return data[1] = ny;
}
/** @} */
/** @defgroup vector-comparisons Compare vectors
* @{
*/
bool operator == ( const VECTOR_PCB &b ) const
{
return data[0] == b.data[0] && data[1] == b.data[1];
}
bool operator != ( const VECTOR_PCB &b ) const
{
return !(*this == b);
}
/** @} */
/** @defgroup vector-arithmetic Arithmetic operations on vectors
* @{
*/
VECTOR_PCB & operator -= ( const VECTOR_PCB &b )
{
data[0] -= b.data[0];
data[1] -= b.data[1];
return *this;
}
VECTOR_PCB operator - ( const VECTOR_PCB &b ) const
{
VECTOR_PCB z = *this;
z -= b;
return z;
}
VECTOR_PCB & operator += ( const VECTOR_PCB &b )
{
data[0] += b.data[0];
data[1] += b.data[1];
return *this;
}
VECTOR_PCB operator + ( VECTOR_PCB b ) const
{
VECTOR_PCB z = *this;
z += b;
return z;
}
VECTOR_PCB & operator *= ( int b )
{
data[0] *= b;
data[1] *= b;
return *this;
}
VECTOR_PCB operator * ( int b ) const
{
VECTOR_PCB z = *this;
z *= b;
return z;
}
VECTOR_PCB & operator /= ( int b )
{
data[0] /= b;
data[1] /= b;
return *this;
}
VECTOR_PCB operator / ( int b ) const
{
VECTOR_PCB z = *this;
z /= b;
return z;
}
/** @} */
};
#define TO_LEGACY_LU_WXP( p ) ( wxPoint( \
TO_LEGACY_LU( ( p )[0] ), \
TO_LEGACY_LU( ( p )[1] ) ) )
#define TO_LEGACY_LU_WXS( p ) ( wxSize( \
TO_LEGACY_LU( ( p )[0] ), \
TO_LEGACY_LU( ( p )[1] ) ) )
#define FROM_LEGACY_LU_VEC( p ) ( VECTOR_PCB::fromXY( \
FROM_LEGACY_LU( ( p ).x ), \
FROM_LEGACY_LU( ( p ).y ) ) )
#endif /* def VECTORPCB_H_INCLUDED */
pcbnew/block_module_editor.cpp
View file @ cc097762
......@@ -460,7 +460,7 @@ void MoveMarkedItems( MODULE* module, wxPoint offset )
continue;
pad->SetPosition( pad->GetPosition() + offset );
pad->m_Pos0 += FROM_LEGACY_LU_VEC( offset );
pad->m_Pos0 += offset;
}
item = module->m_Drawings;
......@@ -538,7 +538,7 @@ void MirrorMarkedItems( MODULE* module, wxPoint offset )
{
#define SETMIRROR( z ) (z) -= offset.x; (z) = -(z); (z) += offset.x;
EDA_ITEM* item;
wxPoint tmp;
if( module == NULL )
return;
......@@ -549,12 +549,10 @@ void MirrorMarkedItems( MODULE* module, wxPoint offset )
if( pad->m_Selected == 0 )
continue;
tmp = pad->GetPosition();
SETMIRROR( tmp.x );
pad->SetPosition( tmp );
pad->m_Pos0.x( FROM_LEGACY_LU( pad->GetPosition().x ) );
pad->m_Offset.x( -pad->m_Offset.x() );
pad->m_DeltaSize.x( -pad->m_DeltaSize.x() );
SETMIRROR( pad->GetPosition().x );
pad->m_Pos0.x = pad->GetPosition().x;
NEGATE( pad->m_Offset.x );
NEGATE( pad->m_DeltaSize.x );
pad->m_Orient = 1800 - pad->m_Orient;
NORMALIZE_ANGLE_POS( pad->m_Orient );
}
......@@ -580,9 +578,7 @@ void MirrorMarkedItems( MODULE* module, wxPoint offset )
break;
case PCB_MODULE_TEXT_T:
tmp = ( (TEXTE_MODULE*) item )->GetPosition();
SETMIRROR( tmp.x );
( (TEXTE_MODULE*) item )->SetPosition( tmp );
SETMIRROR( ( (TEXTE_MODULE*) item )->GetPosition().x );
( (TEXTE_MODULE*) item )->m_Pos0.x = ( (TEXTE_MODULE*) item )->GetPosition().x;
break;
......@@ -612,10 +608,9 @@ void RotateMarkedItems( MODULE* module, wxPoint offset )
{
if( pad->m_Selected == 0 )
continue;
wxPoint pos = pad->GetPosition();
ROTATE( pos );
pad->SetPosition( pos );
pad->m_Pos0 = FROM_LEGACY_LU_VEC( pad->GetPosition() );
ROTATE( pad->GetPosition() );
pad->m_Pos0 = pad->GetPosition();
pad->m_Orient += 900;
NORMALIZE_ANGLE_POS( pad->m_Orient );
}
......@@ -637,11 +632,7 @@ void RotateMarkedItems( MODULE* module, wxPoint offset )
break;
case PCB_MODULE_TEXT_T:
{
wxPoint pos = ( (TEXTE_MODULE*) item )->m_Pos;
ROTATE( pos );
( (TEXTE_MODULE*) item )->m_Pos = pos;
}
ROTATE( ( (TEXTE_MODULE*) item )->GetPosition() );
( (TEXTE_MODULE*) item )->m_Pos0 = ( (TEXTE_MODULE*) item )->GetPosition();
( (TEXTE_MODULE*) item )->m_Orient += 900;
break;
......
pcbnew/board_items_to_polygon_shape_transform.cpp
View file @ cc097762
......@@ -328,13 +328,13 @@ void D_PAD:: TransformShapeWithClearanceToPolygon( std:: vector < CPolyPt>& aCor
{
wxPoint corner_position;
int ii, angle;
int dx = TO_LEGACY_LU( m_Size.x() / 2 ) + aClearanceValue;
int dy = TO_LEGACY_LU( m_Size.y() / 2 ) + aClearanceValue;
int dx = (m_Size.x / 2) + aClearanceValue;
int dy = (m_Size.y / 2) + aClearanceValue;
int delta = 3600 / aCircleToSegmentsCount; // rot angle in 0.1 degree
wxPoint PadShapePos = ReturnShapePos(); /* Note: for pad having a shape offset,
* the pad position is NOT the shape position */
wxSize psize = TO_LEGACY_LU_WXS( m_Size ); /* pad size unsed in RECT and TRAPEZOIDAL pads
wxSize psize = m_Size; /* pad size unsed in RECT and TRAPEZOIDAL pads
* trapezoidal pads are considered as rect
* pad shape having they boudary box size */
......@@ -437,8 +437,8 @@ void D_PAD:: TransformShapeWithClearanceToPolygon( std:: vector < CPolyPt>& aCor
default:
case PAD_TRAPEZOID:
psize.x += TO_LEGACY_LU( abs( m_DeltaSize.y() ) );
psize.y += TO_LEGACY_LU( abs( m_DeltaSize.x() ) );
psize.x += ABS( m_DeltaSize.y );
psize.y += ABS( m_DeltaSize.x );
// fall through
case PAD_RECT:
......@@ -572,8 +572,8 @@ void CreateThermalReliefPadPolygon( std::vector<CPolyPt>& aCornerBuffer,
wxPoint PadShapePos = aPad.ReturnShapePos(); /* Note: for pad having a shape offset,
* the pad position is NOT the shape position */
wxSize copper_thickness;
int dx = TO_LEGACY_LU( aPad.m_Size.x() / 2 );
int dy = TO_LEGACY_LU( aPad.m_Size.y() / 2 );
int dx = aPad.m_Size.x / 2;
int dy = aPad.m_Size.y / 2;
int delta = 3600 / aCircleToSegmentsCount; // rot angle in 0.1 degree
......@@ -684,8 +684,8 @@ void CreateThermalReliefPadPolygon( std::vector<CPolyPt>& aCornerBuffer,
// Oval pad support along the lines of round and rectangular pads
std::vector <wxPoint> corners_buffer; // Polygon buffer as vector
int dx = TO_LEGACY_LU( aPad.m_Size.x() / 2 ) + aThermalGap; // Cutout radius x
int dy = TO_LEGACY_LU( aPad.m_Size.y() / 2 ) + aThermalGap; // Cutout radius y
int dx = (aPad.m_Size.x / 2) + aThermalGap; // Cutout radius x
int dy = (aPad.m_Size.y / 2) + aThermalGap; // Cutout radius y
wxPoint shape_offset;
......@@ -839,8 +839,8 @@ void CreateThermalReliefPadPolygon( std::vector<CPolyPt>& aCornerBuffer,
std::vector <wxPoint> corners_buffer; // Polygon buffer as vector
int dx = TO_LEGACY_LU( aPad.m_Size.x() / 2 ) + aThermalGap; // Cutout radius x
int dy = TO_LEGACY_LU( aPad.m_Size.y() / 2 ) + aThermalGap; // Cutout radius y
int dx = (aPad.m_Size.x / 2) + aThermalGap; // Cutout radius x
int dy = (aPad.m_Size.y / 2) + aThermalGap; // Cutout radius y
// The first point of polygon buffer is left lower corner, second the crosspoint of
// thermal spoke sides, the third is upper right corner and the rest are rounding
......@@ -861,7 +861,7 @@ void CreateThermalReliefPadPolygon( std::vector<CPolyPt>& aCornerBuffer,
RotatePoint( &corner_position, 1800 / aCircleToSegmentsCount ); // Start at half increment offset
angle_pg = i * delta;
RotatePoint( &corner_position, angle_pg ); // Rounding vector rotation
corner_position -= TO_LEGACY_LU_WXS( aPad.m_Size / 2 ); // Rounding vector + Pad corner offset
corner_position -= aPad.m_Size / 2; // Rounding vector + Pad corner offset
corners_buffer.push_back( wxPoint( corner_position.x, corner_position.y ) );
}
......
pcbnew/class_board.cpp
View file @ cc097762
......@@ -20,8 +20,6 @@
#include "class_zone.h"
#include "class_marker_pcb.h"
#include "lengthpcb.h"
/* This is an odd place for this, but CvPcb won't link if it is
* in class_board_item.cpp like I first tried it.
......@@ -239,22 +237,21 @@ bool BOARD::SetCurrentNetClass( const wxString& aNetClassName )
if( m_TrackWidthList.size() == 0 )
{
lists_sizes_modified = true;
m_TrackWidthList.push_back( ZERO_LENGTH );
m_TrackWidthList.push_back( 0 );
}
/* note the m_ViasDimensionsList[0] and m_TrackWidthList[0] values
* are always the Netclass values
*/
if( TO_LEGACY_LU( m_ViasDimensionsList[0].m_Diameter ) != netClass->GetViaDiameter() )
if( m_ViasDimensionsList[0].m_Diameter != netClass->GetViaDiameter() )
lists_sizes_modified = true;
m_ViasDimensionsList[0].m_Diameter = FROM_LEGACY_LU( netClass->GetViaDiameter() );
m_ViasDimensionsList[0].m_Diameter = netClass->GetViaDiameter();
/* NOTE: equality comparison on real values is bad... */
if( TO_LEGACY_LU( m_TrackWidthList[0] ) != netClass->GetTrackWidth() )
if( m_TrackWidthList[0] != netClass->GetTrackWidth() )
lists_sizes_modified = true;
m_TrackWidthList[0] = FROM_LEGACY_LU( netClass->GetTrackWidth() );
m_TrackWidthList[0] = netClass->GetTrackWidth();
if( m_ViaSizeSelector >= m_ViasDimensionsList.size() )
m_ViaSizeSelector = m_ViasDimensionsList.size();
......@@ -647,14 +644,14 @@ bool BOARD::IsModuleLayerVisible( int layer )
const wxPoint BOARD::GetPosition() const
wxPoint& BOARD::GetPosition()
{
return wxPoint ( 0, 0 );
}
static wxPoint dummy( 0, 0 );
void BOARD::SetPosition( const wxPoint& pos ) {
return dummy; // a reference
}
void BOARD::Add( BOARD_ITEM* aBoardItem, int aControl )
{
if( aBoardItem == NULL )
......@@ -1668,7 +1665,7 @@ D_PAD* BOARD::GetPadFast( const wxPoint& aPosition, int aLayerMask )
{
D_PAD* pad = m_NetInfo->GetPad(i);
if( TO_LEGACY_LU_WXP( pad->m_Pos ) != aPosition )
if( pad->m_Pos != aPosition )
continue;
/* Pad found, it must be on the correct layer */
......@@ -1699,7 +1696,7 @@ D_PAD* BOARD::GetPad( std::vector<D_PAD*>& aPadList, const wxPoint& aPosition, i
D_PAD* pad = aPadList[idx];
if( TO_LEGACY_LU_WXP( pad->m_Pos ) == aPosition ) // candidate found
if( pad->m_Pos == aPosition ) // candidate found
{
// The pad must match the layer mask:
if( (aLayerMask & pad->m_layerMask) != 0 )
......@@ -1712,7 +1709,7 @@ D_PAD* BOARD::GetPad( std::vector<D_PAD*>& aPadList, const wxPoint& aPosition, i
for( int ii = idx+1; ii <= idxmax; ii++ )
{
pad = aPadList[ii];
if( TO_LEGACY_LU_WXP( pad->m_Pos ) != aPosition )
if( pad->m_Pos != aPosition )
break;
if( (aLayerMask & pad->m_layerMask) != 0 )
return pad;
......@@ -1721,7 +1718,7 @@ D_PAD* BOARD::GetPad( std::vector<D_PAD*>& aPadList, const wxPoint& aPosition, i
for( int ii = idx-1 ;ii >=0; ii-- )
{
pad = aPadList[ii];
if( TO_LEGACY_LU_WXP( pad->m_Pos ) != aPosition )
if( pad->m_Pos != aPosition )
break;
if( (aLayerMask & pad->m_layerMask) != 0 )
return pad;
......@@ -1731,9 +1728,9 @@ D_PAD* BOARD::GetPad( std::vector<D_PAD*>& aPadList, const wxPoint& aPosition, i
return 0;
}
if( TO_LEGACY_LU( pad->m_Pos.x() ) == aPosition.x ) // Must search considering Y coordinate
if( pad->m_Pos.x == aPosition.x ) // Must search considering Y coordinate
{
if( TO_LEGACY_LU( pad->m_Pos.y() ) < aPosition.y ) // Must search after this item
if(pad->m_Pos.y < aPosition.y) // Must search after this item
{
idx += delta;
if( idx > idxmax )
......@@ -1746,7 +1743,7 @@ D_PAD* BOARD::GetPad( std::vector<D_PAD*>& aPadList, const wxPoint& aPosition, i
idx = 0;
}
}
else if( TO_LEGACY_LU( pad->m_Pos.x() ) < aPosition.x ) // Must search after this item
else if( pad->m_Pos.x < aPosition.x ) // Must search after this item
{
idx += delta;
if( idx > idxmax )
......@@ -1770,9 +1767,9 @@ D_PAD* BOARD::GetPad( std::vector<D_PAD*>& aPadList, const wxPoint& aPosition, i
*/
static bool sortPadsByXthenYCoord( D_PAD* const & ref, D_PAD* const & comp )
{
if( ref->m_Pos.x() == comp->m_Pos.x() )
return ref->m_Pos.y() < comp->m_Pos.y();
return ref->m_Pos.x() < comp->m_Pos.x();
if( ref->m_Pos.x == comp->m_Pos.x )
return ref->m_Pos.y < comp->m_Pos.y;
return ref->m_Pos.x < comp->m_Pos.x;
}
......@@ -2003,13 +2000,13 @@ TRACK* BOARD::MarkTrace( TRACK* aTrace,
if( track->GetState( BEGIN_ONPAD ) )
{
D_PAD * pad = (D_PAD *) track->start;
lenDie += TO_LEGACY_LU_DBL( pad->m_LengthDie );
lenDie += (double) pad->m_LengthDie;
}
if( track->GetState( END_ONPAD ) )
{
D_PAD * pad = (D_PAD *) track->end;
lenDie += TO_LEGACY_LU_DBL( pad->m_LengthDie );
lenDie += (double) pad->m_LengthDie;
}
}
}
......@@ -2033,13 +2030,13 @@ TRACK* BOARD::MarkTrace( TRACK* aTrace,
if( track->GetState( BEGIN_ONPAD ) )
{
D_PAD * pad = (D_PAD *) track->start;
lenDie += TO_LEGACY_LU_DBL( pad->m_LengthDie );
lenDie += (double) pad->m_LengthDie;
}
if( track->GetState( END_ONPAD ) )
{
D_PAD * pad = (D_PAD *) track->end;
lenDie += TO_LEGACY_LU_DBL( pad->m_LengthDie );
lenDie += (double) pad->m_LengthDie;
}
}
}
......
pcbnew/class_board.h
View file @ cc097762
......@@ -9,14 +9,12 @@
#include "dlist.h"
#include "lengthpcb.h"
#include "layers_id_colors_and_visibility.h"
#include "class_netinfo.h"
#include "class_pad.h"
#include "class_colors_design_settings.h"
#include "class_board_design_settings.h"
#include "class_via_dimension.h"
class PCB_BASE_FRAME;
class PCB_EDIT_FRAME;
......@@ -82,6 +80,35 @@ struct LAYER
};
/** a small helper class to handle a stock of specific vias diameter and drill pair
* in the BOARD class
*/
class VIA_DIMENSION
{
public:
int m_Diameter; // <= 0 means use Netclass via diameter
int m_Drill; // <= 0 means use Netclass via drill
VIA_DIMENSION()
{
m_Diameter = 0; m_Drill = 0;
}
bool operator ==( const VIA_DIMENSION& other ) const
{
return (m_Diameter == other.m_Diameter) && (m_Drill == other.m_Drill);
}
bool operator <( const VIA_DIMENSION& other ) const
{
if( m_Diameter != other.m_Diameter )
return m_Diameter < other.m_Diameter;
return m_Drill < other.m_Drill;
}
};
// Helper class to handle high light nets
......@@ -179,7 +206,7 @@ public:
// The first value is the current netclass via size
// tracks widths (max count = HISTORY_MAX_COUNT)
// The first value is the current netclass track width
std::vector <LENGTH_PCB> m_TrackWidthList;
std::vector <int> m_TrackWidthList;
/// Index for m_ViaSizeList to select the value.
/// 0 is the index selection of the default value Netclass
......@@ -226,9 +253,7 @@ public:
* is a dummy.
* @return const wxPoint& of (0,0)
*/
const wxPoint GetPosition() const;
void SetPosition( const wxPoint& pos );
wxPoint& GetPosition();
/**
* Function Add
......@@ -743,7 +768,7 @@ public:
*/
int GetCurrentTrackWidth()
{
return TO_LEGACY_LU( m_TrackWidthList[m_TrackWidthSelector] );
return m_TrackWidthList[m_TrackWidthSelector];
}
......@@ -755,7 +780,7 @@ public:
*/
int GetCurrentViaSize()
{
return TO_LEGACY_LU( m_ViasDimensionsList[m_ViaSizeSelector].m_Diameter );
return m_ViasDimensionsList[m_ViaSizeSelector].m_Diameter;
}
......@@ -767,8 +792,8 @@ public:
*/
int GetCurrentViaDrill()
{
int drill = TO_LEGACY_LU( m_ViasDimensionsList[m_ViaSizeSelector].m_Drill );
return drill > 0 ? drill : -1;
return m_ViasDimensionsList[m_ViaSizeSelector].m_Drill > 0 ?
m_ViasDimensionsList[m_ViaSizeSelector].m_Drill : -1;
}
......
pcbnew/class_board_design_settings.cpp
View file @ cc097762
......@@ -32,13 +32,11 @@ BOARD_DESIGN_SETTINGS::BOARD_DESIGN_SETTINGS()
m_EdgeSegmentWidth = 100; // current graphic line width (EDGE layer only)
m_PcbTextWidth = 100; // current Pcb (not module) Text width
m_PcbTextSize = wxSize( 500, 500 ); // current Pcb (not module) Text size
m_TrackMinWidth = FROM_LEGACY_LU( 80 ); // track min value for width ((min copper size value
m_MinVia = VIA_DIMENSION( FROM_LEGACY_LU( 350 ), FROM_LEGACY_LU( 200 ) );
m_MinMicroVia = VIA_DIMENSION( FROM_LEGACY_LU( 200 ), FROM_LEGACY_LU( 50 ) );
//m_ViasMinSize = FROM_LEGACY_LU( 350 ); // vias (not micro vias) min diameter
//m_ViasMinDrill = FROM_LEGACY_LU( 200 ); // vias (not micro vias) min drill diameter
//m_MicroViasMinSize = FROM_LEGACY_LU( 200 ); // micro vias (not vias) min diameter
//m_MicroViasMinDrill = FROM_LEGACY_LU( 50 ); // micro vias (not vias) min drill diameter
m_TrackMinWidth = 80; // track min value for width ((min copper size value
m_ViasMinSize = 350; // vias (not micro vias) min diameter
m_ViasMinDrill = 200; // vias (not micro vias) min drill diameter
m_MicroViasMinSize = 200; // micro vias (not vias) min diameter
m_MicroViasMinDrill = 50; // micro vias (not vias) min drill diameter
// Global mask margins:
m_SolderMaskMargin = 150; // Solder mask margin
......
pcbnew/class_dimension.h
View file @ cc097762
......@@ -37,15 +37,11 @@ public:
DIMENSION( BOARD_ITEM* aParent );
~DIMENSION();
const wxPoint GetPosition() const
wxPoint& GetPosition()
{
return m_Pos;
}
void SetPosition( const wxPoint& pos ) {
m_Pos = pos;
}
/**
* Function SetLayer
* sets the layer this item is on.
......
pcbnew/class_drawsegment.h
View file @ cc097762
......@@ -44,17 +44,13 @@ public:
* Function GetPosition
* returns the position of this object.
* Required by pure virtual BOARD_ITEM::GetPosition()
* @return const wxPoint - The position of this object.
* @return const wxPoint& - The position of this object.
*/
const wxPoint GetPosition() const
wxPoint& GetPosition()
{
return m_Start;
}
void SetPosition( const wxPoint& pos ) {
m_Start = pos;
}
/**
* Function GetStart
* returns the starting point of the graphic
......
pcbnew/class_marker_pcb.h
View file @ cc097762
......@@ -81,14 +81,11 @@ public:
* Function GetPosition
* returns the position of this MARKER_PCB.
*/
const wxPoint GetPosition() const
wxPoint& GetPosition()
{
return m_Pos;
return (wxPoint&) m_Pos;
}
void SetPosition( const wxPoint& pos ) {
m_Pos = pos;
}
/**
* Function HitTest
......
pcbnew/class_mire.h
View file @ cc097762
......@@ -30,14 +30,11 @@ public:
PCB_TARGET* Next() const { return (PCB_TARGET*) Pnext; }
PCB_TARGET* Back() const { return (PCB_TARGET*) Pnext; }
const wxPoint GetPosition() const
wxPoint& GetPosition()
{
return m_Pos;
}
void SetPosition( const wxPoint& pos ) {
m_Pos = pos;
}
/**
* Function Move
......
pcbnew/class_module.cpp
View file @ cc097762
......@@ -534,10 +534,9 @@ int MODULE::ReadDescr( LINE_READER* aReader )
{
D_PAD* pad = new D_PAD( this );
pad->ReadDescr( aReader );
wxPoint pos = TO_LEGACY_LU_WXP( pad->m_Pos );
RotatePoint( &pos, m_Orient );
pad->m_Pos = FROM_LEGACY_LU_VEC( pos );
pad->m_Pos += FROM_LEGACY_LU_VEC( m_Pos );
RotatePoint( &pad->m_Pos, m_Orient );
pad->m_Pos.x += m_Pos.x;
pad->m_Pos.y += m_Pos.y;
m_Pads.PushBack( pad );
continue;
......
pcbnew/class_module.h
View file @ cc097762
......@@ -135,9 +135,9 @@ public:
* Function GetPosition
* returns the position of this object.
* Required by pure virtual BOARD_ITEM::GetPosition()
* @return const wxPoint - The position of this object.
* @return const wxPoint& - The position of this object.
*/
const wxPoint GetPosition() const
wxPoint& GetPosition()
{
return m_Pos;
}
......
pcbnew/class_module_transform_functions.cpp
View file @ cc097762
......@@ -183,24 +183,12 @@ void MODULE::Flip(const wxPoint& aCentre )
for( ; pt_pad != NULL; pt_pad = pt_pad->Next() )
{
LENGTH_PCB tmpy = pt_pad->m_Pos.y();
tmpy -= FROM_LEGACY_LU( m_Pos.y );
tmpy = -tmpy;
tmpy += FROM_LEGACY_LU( m_Pos.y );
pt_pad->m_Pos.y( tmpy );
tmpy = pt_pad->m_Pos0.y();
NEGATE( tmpy );
pt_pad->m_Pos0.y( tmpy );
tmpy = pt_pad->m_Offset.y();
NEGATE( tmpy );
pt_pad->m_Offset.y( tmpy );
pt_pad->m_DeltaSize.y();
NEGATE( tmpy );
pt_pad->m_DeltaSize.y( tmpy );
pt_pad->m_Pos.y -= m_Pos.y;
pt_pad->m_Pos.y = -pt_pad->m_Pos.y;
pt_pad->m_Pos.y += m_Pos.y;
NEGATE( pt_pad->m_Pos0.y );
NEGATE( pt_pad->m_Offset.y );
NEGATE( pt_pad->m_DeltaSize.y );
NEGATE_AND_NORMALIZE_ANGLE_POS( pt_pad->m_Orient );
/* flip pads layers*/
......@@ -320,7 +308,7 @@ void MODULE::SetPosition( const wxPoint& newpos )
for( D_PAD* pad = m_Pads; pad; pad = pad->Next() )
{
pad->m_Pos += FROM_LEGACY_LU_VEC( delta );
pad->m_Pos += delta;
}
EDA_ITEM* PtStruct = m_Drawings;
......@@ -364,15 +352,15 @@ void MODULE::SetOrientation( int newangle )
for( D_PAD* pad = m_Pads; pad; pad = pad->Next() )
{
px = TO_LEGACY_LU( pad->m_Pos0.x() );
py = TO_LEGACY_LU( pad->m_Pos0.y() );
px = pad->m_Pos0.x;
py = pad->m_Pos0.y;
pad->m_Orient += newangle; /* change m_Orientation */
NORMALIZE_ANGLE_POS( pad->m_Orient );
RotatePoint( &px, &py, m_Orient );
pad->m_Pos.x( FROM_LEGACY_LU( m_Pos.x + px ) );
pad->m_Pos.y( FROM_LEGACY_LU( m_Pos.y + py ) );
pad->m_Pos.x = m_Pos.x + px;
pad->m_Pos.y = m_Pos.y + py;
}
/* Update of the reference and value. */
......
pcbnew/class_netclass.cpp
View file @ cc097762
......@@ -42,8 +42,8 @@ extern BOARD_DESIGN_SETTINGS boardDesignSettings;
const wxString NETCLASS::Default = wxT("Default");
// Initial values for netclass initialization
int NETCLASS::DEFAULT_CLEARANCE = 100; // track to track and track to pads clearance
int NETCLASS::DEFAULT_VIA_DRILL = 250; // default via drill (TODO: should be gone on refactoring)
int NETCLASS::DEFAULT_UVIA_DRILL = 50; // micro via drill (TODO: --"--)
int NETCLASS::DEFAULT_VIA_DRILL = 250; // default via drill
int NETCLASS::DEFAULT_UVIA_DRILL = 50; // micro via drill
NETCLASS::NETCLASS( BOARD* aParent, const wxString& aName, const NETCLASS* initialParameters ) :
......@@ -55,40 +55,37 @@ NETCLASS::NETCLASS( BOARD* aParent, const wxString& aName, const NETCLASS* initi
SetParams( initialParameters );
}
void NETCLASS::SetParams( const NETCLASS* defaults )
{
if( defaults )
{
SetClearance( defaults->GetClearance() );
SetTrackWidth( defaults->GetTrackWidth() );
Via( defaults->Via() );
MicroVia( defaults->MicroVia() );
SetViaDiameter( defaults->GetViaDiameter() );
SetViaDrill( defaults->GetViaDrill() );
SetuViaDiameter( defaults->GetuViaDiameter() );
SetuViaDrill( defaults->GetuViaDrill() );
}
else
{
SetToDefault();
}
}
void NETCLASS::SetToDefault()
{
// We should use m_Parent->GetBoardDesignSettings()
{ // We should use m_Parent->GetBoardDesignSettings()
// But when the NETCLASSES constructor is called
// (it call NETCLASS constructor), the m_Parent constructor (see BOARD::BOARD)
// is not run, and GetBoardDesignSettings() return a bad value
// TODO: see how change that.
const BOARD_DESIGN_SETTINGS& g = boardDesignSettings;
TrackWidth( g.m_TrackMinWidth );
//SetViaDrill( TO_LEGACY_LU( g.m_ViasMinDrill ) ); // was DEFAULT_VIA_DRILL
//SetuViaDrill( TO_LEGACY_LU( g.m_MicroViasMinDrill ) ); // DEFAULT_UVIA_DRILL
Via( g.m_MinVia );
MicroVia( g.m_MinMicroVia );
SetTrackWidth( g.m_TrackMinWidth );
SetViaDiameter( g.m_ViasMinSize );
SetuViaDiameter(g.m_MicroViasMinSize );
// Use default values for next parameters:
Clearance( FROM_LEGACY_LU( DEFAULT_CLEARANCE ) );
SetClearance( DEFAULT_CLEARANCE );
SetViaDrill( DEFAULT_VIA_DRILL );
SetuViaDrill( DEFAULT_UVIA_DRILL );
}
}
NETCLASS::~NETCLASS()
{
}
......@@ -297,14 +294,14 @@ bool NETCLASS::Save( FILE* aFile ) const
// Write parameters
fprintf( aFile, "Clearance %f\n", TO_LEGACY_LU_DBL( Clearance() ) );
fprintf( aFile, "TrackWidth %f\n", TO_LEGACY_LU_DBL( TrackWidth() ) );
fprintf( aFile, "Clearance %d\n", GetClearance() );
fprintf( aFile, "TrackWidth %d\n", GetTrackWidth() );
fprintf( aFile, "ViaDia %f\n", TO_LEGACY_LU_DBL( Via().m_Diameter ) );
fprintf( aFile, "ViaDrill %f\n", TO_LEGACY_LU_DBL( Via().m_Drill ) );
fprintf( aFile, "ViaDia %d\n", GetViaDiameter() );
fprintf( aFile, "ViaDrill %d\n", GetViaDrill() );
fprintf( aFile, "uViaDia %f\n", TO_LEGACY_LU_DBL( MicroVia().m_Diameter ) );
fprintf( aFile, "uViaDrill %f\n", TO_LEGACY_LU_DBL( MicroVia().m_Drill ) );
fprintf( aFile, "uViaDia %d\n", GetuViaDiameter() );
fprintf( aFile, "uViaDrill %d\n", GetuViaDrill() );
// Write members:
for( const_iterator i = begin(); i!=end(); ++i )
......@@ -345,8 +342,6 @@ bool NETCLASS::ReadDescr( LINE_READER* aReader )
char* Line;
char Buffer[1024];
wxString netname;
VIA_DIMENSION via = Via();
VIA_DIMENSION uvia = MicroVia();
while( aReader->ReadLine() )
{
......@@ -367,37 +362,33 @@ bool NETCLASS::ReadDescr( LINE_READER* aReader )
if( strnicmp( Line, "Clearance", 9 ) == 0 )
{
Clearance( FROM_LEGACY_LU( atof( Line + 9 ) ) );
SetClearance( atoi( Line + 9 ) );
continue;
}
if( strnicmp( Line, "TrackWidth", 10 ) == 0 )
{
TrackWidth( FROM_LEGACY_LU( atof( Line + 10 ) ) );
SetTrackWidth( atoi( Line + 10 ) );
continue;
}
if( strnicmp( Line, "ViaDia", 6 ) == 0 )
{
via.m_Diameter = FROM_LEGACY_LU( atof( Line + 6 ) );
Via(via);
SetViaDiameter( atoi( Line + 6 ) );
continue;
}
if( strnicmp( Line, "ViaDrill", 8 ) == 0 )
{
via.m_Drill = FROM_LEGACY_LU( atof( Line + 8 ) );
Via(via);
SetViaDrill( atoi( Line + 8 ) );
continue;
}
if( strnicmp( Line, "uViaDia", 7 ) == 0 )
{
uvia.m_Diameter = FROM_LEGACY_LU( atof( Line + 7 ) );
MicroVia(uvia);
SetuViaDiameter( atoi( Line + 7 ) );
continue;
}
if( strnicmp( Line, "uViaDrill", 9 ) == 0 )
{
uvia.m_Drill = FROM_LEGACY_LU( atof( Line + 9 ) );
MicroVia(uvia);
SetuViaDrill( atoi( Line + 9 ) );
continue;
}
......@@ -421,27 +412,27 @@ bool NETCLASS::ReadDescr( LINE_READER* aReader )
int NETCLASS::GetTrackMinWidth() const
{
return TO_LEGACY_LU( m_Parent->GetBoardDesignSettings()->m_TrackMinWidth );
return m_Parent->GetBoardDesignSettings()->m_TrackMinWidth;
}
int NETCLASS::GetViaMinDiameter() const
{
return TO_LEGACY_LU( m_Parent->GetBoardDesignSettings()->m_MinVia.m_Diameter );
return m_Parent->GetBoardDesignSettings()->m_ViasMinSize;
}
int NETCLASS::GetViaMinDrill() const
{
return TO_LEGACY_LU( m_Parent->GetBoardDesignSettings()->m_MinVia.m_Drill );
return m_Parent->GetBoardDesignSettings()->m_ViasMinDrill;
}
int NETCLASS::GetuViaMinDiameter() const
{
return TO_LEGACY_LU( m_Parent->GetBoardDesignSettings()->m_MinMicroVia.m_Diameter );
return m_Parent->GetBoardDesignSettings()->m_MicroViasMinSize;
}
int NETCLASS::GetuViaMinDrill() const
{
return TO_LEGACY_LU( m_Parent->GetBoardDesignSettings()->m_MinMicroVia.m_Drill );
return m_Parent->GetBoardDesignSettings()->m_MicroViasMinDrill;
}
pcbnew/class_netclass.h
View file @ cc097762
......@@ -36,9 +36,6 @@
#include <wx/string.h>
#include "lengthpcb.h"
#include "class_via_dimension.h"
class LINE_READER;
class BOARD;
......@@ -70,12 +67,14 @@ protected:
/// The units on these parameters is 1/10000 of an inch, see define #PCB_INTERNAL_UNIT
LENGTH_PCB m_Clearance; ///< clearance when routing
int m_Clearance; ///< clearance when routing
LENGTH_PCB m_TrackWidth; ///< track width used to route NETs in this NETCLASS
int m_TrackWidth; ///< track width used to route NETs in this NETCLASS
int m_ViaDia; ///< via diameter
int m_ViaDrill; ///< via drill hole diameter
VIA_DIMENSION m_Via; ///< Specific normal via
VIA_DIMENSION m_uVia; ///< Specific microvia
int m_uViaDia; ///< microvia diameter
int m_uViaDrill; ///< microvia drill hole diameter
public:
......@@ -172,40 +171,29 @@ public:
const wxString& GetDescription() const { return m_Description; }
void SetDescription( const wxString& aDesc ) { m_Description = aDesc; }
int GetClearance() const { return TO_LEGACY_LU( m_Clearance ); }
void SetClearance( int aClearance ) { m_Clearance = FROM_LEGACY_LU( aClearance ); }
int GetClearance() const { return m_Clearance; }
void SetClearance( int aClearance ) { m_Clearance = aClearance; }
int GetTrackWidth() const { return TO_LEGACY_LU( m_TrackWidth ); }
int GetTrackWidth() const { return m_TrackWidth; }
int GetTrackMinWidth() const;
void SetTrackWidth( int aWidth ) { m_TrackWidth = FROM_LEGACY_LU( aWidth ); }
void SetTrackWidth( int aWidth ) { m_TrackWidth = aWidth; }
int GetViaDiameter() const { return TO_LEGACY_LU( m_Via.m_Diameter ); }
int GetViaDiameter() const { return m_ViaDia; }
int GetViaMinDiameter() const;
void SetViaDiameter( int aDia ) { m_Via.m_Diameter = FROM_LEGACY_LU( aDia ); }
void SetViaDiameter( int aDia ) { m_ViaDia = aDia; }
int GetViaDrill() const { return TO_LEGACY_LU( m_Via.m_Drill ); }
int GetViaDrill() const { return m_ViaDrill; }
int GetViaMinDrill() const;
void SetViaDrill( int aSize ) { m_Via.m_Drill = FROM_LEGACY_LU( aSize ); }
void SetViaDrill( int aSize ) { m_ViaDrill = aSize; }
int GetuViaDiameter() const { return TO_LEGACY_LU( m_uVia.m_Diameter ); }
int GetuViaDiameter() const { return m_uViaDia; }
int GetuViaMinDiameter() const;
void SetuViaDiameter( int aSize ) { m_uVia.m_Diameter = FROM_LEGACY_LU( aSize ); }
void SetuViaDiameter( int aSize ) { m_uViaDia = aSize; }
int GetuViaDrill() const { return TO_LEGACY_LU( m_uVia.m_Drill ); }
int GetuViaDrill() const { return m_uViaDrill; }
int GetuViaMinDrill() const;
void SetuViaDrill( int aSize ) { m_uVia.m_Drill = FROM_LEGACY_LU( aSize ); }
LENGTH_PCB Clearance() const { return m_Clearance; }
LENGTH_PCB Clearance( const LENGTH_PCB a ) { return m_Clearance = a; }
LENGTH_PCB TrackWidth() const { return m_TrackWidth; }
LENGTH_PCB TrackWidth( const LENGTH_PCB a ) { return m_TrackWidth = a; }
VIA_DIMENSION Via() const { return m_Via; }
VIA_DIMENSION Via( const VIA_DIMENSION a ) { return m_Via = a; }
void SetuViaDrill( int aSize ) { m_uViaDrill = aSize; }
VIA_DIMENSION MicroVia() const { return m_uVia; }
VIA_DIMENSION MicroVia( const VIA_DIMENSION a ) { return m_uVia = a; }
/**
* Function SetParams
......@@ -216,11 +204,6 @@ public:
*/
void SetParams( const NETCLASS* defaults = NULL );
/**
* Sets Parameters to their default state.
*/
void SetToDefault();
/**
* Function Save
* writes the data structures for this object out to a FILE in "*.brd" format.
......
pcbnew/class_netinfo_item.cpp
View file @ cc097762
......@@ -153,7 +153,7 @@ void NETINFO_ITEM::DisplayInfo( EDA_DRAW_FRAME* frame )
if( pad->GetNet() == GetNet() )
{
count++;
lengthdie += TO_LEGACY_LU_DBL( pad->m_LengthDie );
lengthdie += pad->m_LengthDie;
}
}
}
......@@ -224,6 +224,6 @@ void RATSNEST_ITEM::Draw( EDA_DRAW_PANEL* panel,
{
GRSetDrawMode( DC, aDrawMode );
int color = g_ColorsSettings.GetItemColor(RATSNEST_VISIBLE);
GRLine( &panel->m_ClipBox, DC, TO_LEGACY_LU_WXP( m_PadStart->m_Pos ) - aOffset,
TO_LEGACY_LU_WXP( m_PadEnd->m_Pos ) - aOffset, 0, color );
GRLine( &panel->m_ClipBox, DC, m_PadStart->m_Pos - aOffset,
m_PadEnd->m_Pos - aOffset, 0, color );
}
pcbnew/class_pad.cpp
View file @ cc097762
This diff is collapsed.
pcbnew/class_pad.h
View file @ cc097762
......@@ -11,8 +11,6 @@
#include "pad_shapes.h"
#include "PolyLine.h"
#include "lengthpcb.h"
#include "vectorpcb.h"
class LINE_READER;
class EDA_3D_CANVAS;
......@@ -72,9 +70,8 @@ private:
wxString m_ShortNetname; // short net name, like vout from /mysheet/mysubsheet/vout
public: /** TODO: that's not so good if parameters are easily modifiable outside
(e. g. m_Pos, which could be coherent with m_Pos and module orient/pos ) */
VECTOR_PCB m_Pos; // pad Position on board
public:
wxPoint m_Pos; // pad Position on board
union
{
......@@ -88,17 +85,14 @@ public: /** TODO: that's not so good if parameters are easily modifiable outside
// 2..14 = internal layers
// 16 .. 31 = technical layers
int m_PadShape; ///< Shape: PAD_CIRCLE, PAD_RECT, PAD_OVAL, PAD_TRAPEZOID
int m_DrillShape; ///< Shape PAD_CIRCLE, PAD_OVAL
/// @TODO: as m_DrillShape is eqv. to m_Drill.x==.y
/// it would be relatively easy to remove
/// this redundant flag.
int m_PadShape; // Shape: PAD_CIRCLE, PAD_RECT, PAD_OVAL, PAD_TRAPEZOID
int m_DrillShape; // Shape PAD_CIRCLE, PAD_OVAL
VECTOR_PCB m_Drill; ///< Drill diam (drill shape = PAD_CIRCLE) or drill size
/// (shape = OVAL) for drill shape = PAD_CIRCLE, drill
/// diam = m_Drill.x
wxSize m_Drill; // Drill diam (drill shape = PAD_CIRCLE) or drill size
// (shape = OVAL) for drill shape = PAD_CIRCLE, drill
// diam = m_Drill.x
VECTOR_PCB m_Offset; /* This parameter is useful only for oblong pads (it can be used for other
wxSize m_Offset; /* This parameter is useful only for oblong pads (it can be used for other
* shapes, but without any interest).
* this is the offset between the pad hole and the pad shape (you must
* understand here pad shape = copper area around the hole)
......@@ -111,11 +105,11 @@ public: /** TODO: that's not so good if parameters are easily modifiable outside
* D_PAD::ReturnShapePos() returns the physical shape position according to
* the offset and the pad rotation.*/
VECTOR_PCB m_Size; // X and Y size ( relative to orient 0)
wxSize m_Size; // X and Y size ( relative to orient 0)
VECTOR_PCB m_DeltaSize; // delta on rectangular shapes
wxSize m_DeltaSize; // delta on rectangular shapes
VECTOR_PCB m_Pos0; // Initial Pad position (i.e. pad position relative to the
wxPoint m_Pos0; // Initial Pad position (i.e. pas position relative to the
// module anchor, orientation 0
int m_ShapeMaxRadius; // radius of the circle containing the pad shape
......@@ -124,16 +118,16 @@ public: /** TODO: that's not so good if parameters are easily modifiable outside
static int m_PadSketchModePenSize; // Pen size used to draw pads in sketch mode
// (mode used to print pads on silkscreen layer)
LENGTH_PCB m_LengthDie; // Length net from pad to die on chip
int m_LengthDie; // Length net from pad to die on chip
// Local clearance. When null, the module default value is used.
// when the module default value is null, the netclass value is used
// Usually the local clearance is null
LENGTH_PCB m_LocalClearance;
int m_LocalClearance;
// Local mask margins: when NULL, the parent footprint design values are used
LENGTH_PCB m_LocalSolderMaskMargin; // Local solder mask margin
LENGTH_PCB m_LocalSolderPasteMargin; // Local solder paste margin absolute value
int m_LocalSolderMaskMargin; // Local solder mask margin
int m_LocalSolderPasteMargin; // Local solder paste margin absolute value
double m_LocalSolderPasteMarginRatio; // Local solder mask margin ratio value of pad size
// The final margin is the sum of these 2 values
......@@ -178,17 +172,16 @@ public:
* Function GetPosition
* returns the position of this object.
* @return const wxPoint& - The position of this object.
* @TODO: could move virtual method to .c file
*/
const wxPoint GetPosition() const
wxPoint& GetPosition()
{
return TO_LEGACY_LU_WXP( m_Pos );
return m_Pos;
}
void SetPosition( const wxPoint& aPos )
{
m_Pos = FROM_LEGACY_LU_VEC( aPos );
m_Pos = aPos;
}
/**
......@@ -387,7 +380,7 @@ public:
*/
virtual void Move( const wxPoint& aMoveVector )
{
m_Pos += FROM_LEGACY_LU_VEC( aMoveVector );
m_Pos += aMoveVector;
}
......
pcbnew/class_pad_draw_functions.cpp
View file @ cc097762
......@@ -392,9 +392,9 @@ void D_PAD::DrawShape( EDA_RECT* aClipBox, wxDC* aDC, PAD_DRAWINFO& aDrawInfo )
// calculate pad shape position :
wxPoint shape_pos = ReturnShapePos() - aDrawInfo.m_Offset;
wxSize halfsize = TO_LEGACY_LU_WXS( m_Size );
halfsize.x /= 2;
halfsize.y /= 2;
wxSize halfsize = m_Size;
halfsize.x >>= 1;
halfsize.y >>= 1;
switch( GetShape() )
{
......@@ -475,8 +475,8 @@ void D_PAD::DrawShape( EDA_RECT* aClipBox, wxDC* aDC, PAD_DRAWINFO& aDrawInfo )
}
/* Draw the pad hole */
wxPoint holepos = TO_LEGACY_LU_WXP( m_Pos ) - aDrawInfo.m_Offset;
int hole = TO_LEGACY_LU( m_Drill.x() ) / 2;
wxPoint holepos = m_Pos - aDrawInfo.m_Offset;
int hole = m_Drill.x >> 1;
bool drawhole = hole > 0;
......@@ -513,20 +513,20 @@ void D_PAD::DrawShape( EDA_RECT* aClipBox, wxDC* aDC, PAD_DRAWINFO& aDrawInfo )
break;
case PAD_OVAL:
halfsize.x = TO_LEGACY_LU( m_Drill.x() ) / 2;
halfsize.y = TO_LEGACY_LU( m_Drill.y() ) / 2;
halfsize.x = m_Drill.x >> 1;
halfsize.y = m_Drill.y >> 1;
if( m_Drill.x() > m_Drill.y() ) /* horizontal */
if( m_Drill.x > m_Drill.y ) /* horizontal */
{
delta_cx = halfsize.x - halfsize.y;
delta_cy = 0;
seg_width = TO_LEGACY_LU( m_Drill.y() );
seg_width = m_Drill.y;
}
else /* vertical */
{
delta_cx = 0;
delta_cy = halfsize.y - halfsize.x;
seg_width = TO_LEGACY_LU( m_Drill.x() );
seg_width = m_Drill.x;
}
RotatePoint( &delta_cx, &delta_cy, angle );
......@@ -576,13 +576,13 @@ void D_PAD::DrawShape( EDA_RECT* aClipBox, wxDC* aDC, PAD_DRAWINFO& aDrawInfo )
if( GetShape() == PAD_CIRCLE )
angle = 0;
AreaSize = TO_LEGACY_LU_WXS( m_Size );
AreaSize = m_Size;
if( m_Size.y() > m_Size.x() )
if( m_Size.y > m_Size.x )
{
angle += 900;
AreaSize.x = TO_LEGACY_LU( m_Size.y() );
AreaSize.y = TO_LEGACY_LU( m_Size.x() );
AreaSize.x = m_Size.y;
AreaSize.y = m_Size.x;
}
if( shortname_len > 0 ) // if there is a netname, provides room to display this netname
......@@ -664,23 +664,23 @@ int D_PAD::BuildSegmentFromOvalShape(wxPoint& aSegStart, wxPoint& aSegEnd, int a
{
int width;
if( m_Size.y() < m_Size.x() ) // Build an horizontal equiv segment
if( m_Size.y < m_Size.x ) // Build an horizontal equiv segment
{
int delta = TO_LEGACY_LU( ( m_Size.x() - m_Size.y() ) / 2 );
int delta = ( m_Size.x - m_Size.y ) / 2;
aSegStart.x = -delta;
aSegStart.y = 0;
aSegEnd.x = delta;
aSegEnd.y = 0;
width = TO_LEGACY_LU( m_Size.y() );
width = m_Size.y;
}
else // Vertical oval: build a vertical equiv segment
{
int delta = TO_LEGACY_LU( ( m_Size.y() -m_Size.x() ) / 2 );
int delta = ( m_Size.y -m_Size.x ) / 2;
aSegStart.x = 0;
aSegStart.y = -delta;
aSegEnd.x = 0;
aSegEnd.y = delta;
width = TO_LEGACY_LU( m_Size.x() );
width = m_Size.x;
}
if( aRotation )
......@@ -701,8 +701,8 @@ void D_PAD::BuildPadPolygon( wxPoint aCoord[4], wxSize aInflateValue, int aRotat
wxSize delta;
wxSize halfsize;
halfsize.x = TO_LEGACY_LU( m_Size.x() / 2 );
halfsize.y = TO_LEGACY_LU( m_Size.y() / 2 );
halfsize.x = m_Size.x >> 1;
halfsize.y = m_Size.y >> 1;
/* For rectangular shapes, inflate is easy
*/
......@@ -721,8 +721,8 @@ void D_PAD::BuildPadPolygon( wxPoint aCoord[4], wxSize aInflateValue, int aRotat
else
{
// Trapezoidal pad: verify delta values
delta.x = TO_LEGACY_LU( m_DeltaSize.x() / 2 );
delta.y = TO_LEGACY_LU( m_DeltaSize.y() / 2 );
delta.x = ( m_DeltaSize.x >> 1 );
delta.y = ( m_DeltaSize.y >> 1 );
// be sure delta values are not to large
if( (delta.x < 0) && (delta.x <= -halfsize.y) )
......@@ -762,7 +762,7 @@ void D_PAD::BuildPadPolygon( wxPoint aCoord[4], wxSize aInflateValue, int aRotat
if( delta.y ) // lower and upper segment is horizontal
{
// Calculate angle of left (or right) segment with vertical axis
angle = atan2( m_DeltaSize.y(), m_Size.y() );
angle = atan2( double( m_DeltaSize.y ), double( m_Size.y ) );
// left and right sides are moved by aInflateValue.x in their perpendicular direction
// We must calculate the corresponding displacement on the horizontal axis
......@@ -778,7 +778,7 @@ void D_PAD::BuildPadPolygon( wxPoint aCoord[4], wxSize aInflateValue, int aRotat
else if( delta.x ) // left and right segment is vertical
{
// Calculate angle of lower (or upper) segment with horizontal axis
angle = atan2( m_DeltaSize.x(), m_Size.x() );
angle = atan2( double( m_DeltaSize.x ), double( m_Size.x ) );
// lower and upper sides are moved by aInflateValue.x in their perpendicular direction
// We must calculate the corresponding displacement on the vertical axis
......
pcbnew/class_pcb_text.h
View file @ cc097762
......@@ -26,15 +26,11 @@ public:
* returns the position of this object.
* @return wxPoint& - The position of this object, non-const so it can be changed
*/
const wxPoint GetPosition() const
wxPoint& GetPosition()
{
return m_Pos; // within EDA_TEXT
}
void SetPosition( const wxPoint& pos ) {
m_Pos = pos;
}
/**
* Function Move
* move this object.
......
pcbnew/class_text_mod.h
View file @ cc097762
......@@ -51,14 +51,11 @@ public:
* Required by pure virtual BOARD_ITEM::GetPosition()
* @return const wxPoint& - The position of this object.
*/
const wxPoint GetPosition() const
wxPoint& GetPosition()
{
return m_Pos;
}
void SetPosition( const wxPoint& pos ) {
m_Pos = pos;
}
void Copy( TEXTE_MODULE* source ); // copy structure
......
pcbnew/class_track.h
View file @ cc097762
......@@ -120,21 +120,13 @@ public:
/**
* Function GetPosition
* returns the position of this object.
* @return const wxPoint - The position of this object.
* @return const wxPoint& - The position of this object.
*/
const wxPoint GetPosition() const
wxPoint& GetPosition()
{
return m_Start; // it had to be start or end.
}
/**
* Sets the position of this object. Virtual function, needed by BOARD_ITEM
* @param pos The position of this object
*/
void SetPosition( const wxPoint& pos ) {
m_Start = pos;
}
EDA_RECT GetBoundingBox() const;
/**
......@@ -478,11 +470,12 @@ public:
* returns the position of this object.
* @return const wxPoint& - The position of this object.
*/
const wxPoint GetPosition() const
wxPoint& GetPosition()
{
return m_Start;
}
void SetPosition( const wxPoint& aPoint ) { m_Start = aPoint; m_End = aPoint; }
/**
......
pcbnew/class_zone.cpp
View file @ cc097762
......@@ -84,14 +84,21 @@ bool ZONE_CONTAINER::UnFill()
}
const wxPoint ZONE_CONTAINER::GetPosition() const
wxPoint& ZONE_CONTAINER::GetPosition()
{
return m_Poly? GetCornerPosition( 0 ) : wxPoint( 0, 0 );
}
static wxPoint pos;
if( m_Poly )
{
pos = GetCornerPosition( 0 );
}
else
pos = wxPoint( 0, 0 );
void ZONE_CONTAINER::SetPosition( const wxPoint& pos ) {
return pos;
}
void ZONE_CONTAINER::SetNet( int aNetCode )
{
m_NetCode = aNetCode;
......
pcbnew/class_zone.h
View file @ cc097762
......@@ -118,8 +118,8 @@ public:
* Function GetPosition
* @return a wxPoint, position of the first point of the outline
*/
const wxPoint GetPosition() const;
void SetPosition( const wxPoint& pos );
wxPoint& GetPosition();
/**
* Function copy
* copy useful data from the source.
......
pcbnew/clean.cpp
View file @ cc097762
......@@ -850,7 +850,7 @@ void ConnectDanglingEndToPad( PCB_EDIT_FRAME* frame )
if( pad )
{
// test if the track start point is not exactly starting on the pad
if( segment->m_Start != TO_LEGACY_LU_WXP( pad->m_Pos ) )
if( segment->m_Start != pad->m_Pos )
{
if( segment->GetTrace( frame->GetBoard()->m_Track, NULL, START ) == NULL )
{
......@@ -858,7 +858,7 @@ void ConnectDanglingEndToPad( PCB_EDIT_FRAME* frame )
frame->GetBoard()->m_Track.Insert( newTrack, segment->Next() );
newTrack->m_End = TO_LEGACY_LU_WXP( pad->m_Pos );
newTrack->m_End = pad->m_Pos;
newTrack->start = segment;
newTrack->end = pad;
......@@ -872,7 +872,7 @@ void ConnectDanglingEndToPad( PCB_EDIT_FRAME* frame )
if( pad )
{
// test if the track end point is not exactly on the pad
if( segment->m_End != TO_LEGACY_LU_WXP( pad->m_Pos ) )
if( segment->m_End != pad->m_Pos )
{
if( segment->GetTrace( frame->GetBoard()->m_Track, NULL, END ) == NULL )
{
......@@ -880,7 +880,7 @@ void ConnectDanglingEndToPad( PCB_EDIT_FRAME* frame )
frame->GetBoard()->m_Track.Insert( newTrack, segment->Next() );
newTrack->m_Start = TO_LEGACY_LU_WXP( pad->m_Pos );
newTrack->m_Start = pad->m_Pos;
newTrack->start = pad;
newTrack->end = segment;
......
pcbnew/dialogs/dialog_design_rules.cpp
View file @ cc097762
This diff is collapsed.
pcbnew/dialogs/dialog_design_rules.h
View file @ cc097762
......@@ -57,7 +57,7 @@ private:
// List of values to "customize" some tracks and vias
std::vector <VIA_DIMENSION> m_ViasDimensionsList;
std::vector <LENGTH_PCB> m_TracksWidthList;
std::vector <int> m_TracksWidthList;
private:
void OnNetClassesNameLeftClick( wxGridEvent& event ){ event.Skip(); }
......
pcbnew/dialogs/dialog_design_rules_base.cpp
View file @ cc097762
......@@ -213,6 +213,7 @@ DIALOG_DESIGN_RULES_BASE::DIALOG_DESIGN_RULES_BASE( wxWindow* parent, wxWindowID
fgMinValuesSizer->Add( m_MicroViaMinSizeTitle, 0, wxALIGN_RIGHT|wxALIGN_CENTER_VERTICAL|wxTOP|wxLEFT, 5 );
m_SetMicroViasMinSizeCtrl = new wxTextCtrl( m_panelGolbalDesignRules, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
m_SetMicroViasMinSizeCtrl->SetMaxLength( 6 );
fgMinValuesSizer->Add( m_SetMicroViasMinSizeCtrl, 0, wxEXPAND|wxTOP|wxRIGHT|wxLEFT, 5 );
m_MicroViaMinDrillTitle = new wxStaticText( m_panelGolbalDesignRules, wxID_ANY, _("Min uvia drill dia"), wxDefaultPosition, wxDefaultSize, 0 );
......@@ -220,6 +221,7 @@ DIALOG_DESIGN_RULES_BASE::DIALOG_DESIGN_RULES_BASE( wxWindow* parent, wxWindowID
fgMinValuesSizer->Add( m_MicroViaMinDrillTitle, 0, wxALIGN_RIGHT|wxTOP|wxBOTTOM|wxLEFT, 5 );
m_SetMicroViasMinDrillCtrl = new wxTextCtrl( m_panelGolbalDesignRules, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
m_SetMicroViasMinDrillCtrl->SetMaxLength( 6 );
fgMinValuesSizer->Add( m_SetMicroViasMinDrillCtrl, 0, wxEXPAND|wxALL, 5 );
sbMinSizesSizer->Add( fgMinValuesSizer, 0, wxEXPAND, 5 );
......
pcbnew/dialogs/dialog_drc.cpp
View file @ cc097762
......@@ -130,21 +130,12 @@ void DIALOG_DRC_CONTROL::InitValues()
*/
void DIALOG_DRC_CONTROL::SetDrcParmeters( )
{
#ifdef KICAD_NANOMETRE
m_BrdSettings->m_TrackMinWidth =
LengthFromTextCtrl( *m_SetTrackMinWidthCtrl );
m_BrdSettings->m_MinVia.m_Diameter =
LengthFromTextCtrl( *m_SetViaMinSizeCtrl );
m_BrdSettings->m_MinMicroVia.m_Diameter =
LengthFromTextCtrl( *m_SetMicroViakMinSizeCtrl );
#else
m_BrdSettings->m_TrackMinWidth =
ReturnValueFromTextCtrl( *m_SetTrackMinWidthCtrl, m_Parent->m_InternalUnits );
m_BrdSettings->m_MinVia.m_Diameter =
m_BrdSettings->m_ViasMinSize =
ReturnValueFromTextCtrl( *m_SetViaMinSizeCtrl, m_Parent->m_InternalUnits );
m_BrdSettings->m_MinMicroVia.m_Diameter =
m_BrdSettings->m_MicroViasMinSize =
ReturnValueFromTextCtrl( *m_SetMicroViakMinSizeCtrl, m_Parent->m_InternalUnits );
#endif
}
......
pcbnew/dialogs/dialog_gendrill.cpp
View file @ cc097762
......@@ -185,7 +185,7 @@ void DIALOG_GENDRILL::InitDisplayParams( void )
{
if( pad->m_DrillShape == PAD_CIRCLE )
{
if( pad->m_Drill.x() != ZERO_LENGTH )
if( pad->m_Drill.x != 0 )
{
if( pad->m_Attribut == PAD_HOLE_NOT_PLATED )
m_notplatedPadsHoleCount++;
......@@ -195,7 +195,7 @@ void DIALOG_GENDRILL::InitDisplayParams( void )
}
else
{
if( min( TO_LEGACY_LU( pad->m_Drill.x() ), TO_LEGACY_LU( pad->m_Drill.y() ) ) != 0 )
if( MIN( pad->m_Drill.x, pad->m_Drill.y ) != 0 )
{
if( pad->m_Attribut == PAD_HOLE_NOT_PLATED )
m_notplatedPadsHoleCount++;
......
pcbnew/dialogs/dialog_pad_properties.cpp
View file @ cc097762
This diff is collapsed.
pcbnew/dragsegm.cpp
View file @ cc097762
......@@ -52,7 +52,7 @@ void DrawSegmentWhileMovingFootprint( EDA_DRAW_PANEL* panel, wxDC* DC )
if( pt_pad )
{
pos = TO_LEGACY_LU_WXP( pt_pad->m_Pos ) - g_Offset_Module;
pos = pt_pad->m_Pos - g_Offset_Module;
Track->m_Start = pos;
}
......@@ -60,7 +60,7 @@ void DrawSegmentWhileMovingFootprint( EDA_DRAW_PANEL* panel, wxDC* DC )
if( pt_pad )
{
pos = TO_LEGACY_LU_WXP( pt_pad->m_Pos ) - g_Offset_Module;
pos = pt_pad->m_Pos - g_Offset_Module;
Track->m_End = pos;
}
......@@ -105,7 +105,7 @@ void Build_1_Pad_SegmentsToDrag( EDA_DRAW_PANEL* panel, wxDC* DC, D_PAD* PtPad )
Track = pcb->m_Track->GetStartNetCode( net_code );
pos = TO_LEGACY_LU_WXP( PtPad->m_Pos );
pos = PtPad->m_Pos;
LayerMask = PtPad->m_layerMask;
for( ; Track; Track = Track->Next() )
......
pcbnew/drc.cpp
View file @ cc097762
......@@ -54,24 +54,15 @@ void DRC::ShowDialog()
// copy data retained in this DRC object into the m_ui DrcPanel:
#ifdef KICAD_NANOMETRE
LengthToTextCtrl( *m_ui->m_SetTrackMinWidthCtrl,
m_pcb->GetBoardDesignSettings()->m_TrackMinWidth );
LengthToTextCtrl( *m_ui->m_SetViaMinSizeCtrl,
m_pcb->GetBoardDesignSettings()->m_MinVia.m_Diameter );
LengthToTextCtrl( *m_ui->m_SetMicroViakMinSizeCtrl,
m_pcb->GetBoardDesignSettings()->m_MinMicroVia.m_Diameter );
#else
PutValueInLocalUnits( *m_ui->m_SetTrackMinWidthCtrl,
TO_LEGACY_LU( m_pcb->GetBoardDesignSettings()->m_TrackMinWidth ),
m_pcb->GetBoardDesignSettings()->m_TrackMinWidth,
m_mainWindow->m_InternalUnits );
PutValueInLocalUnits( *m_ui->m_SetViaMinSizeCtrl,
TO_LEGACY_LU( m_pcb->GetBoardDesignSettings()->m_MinVia.m_Diameter ),
m_pcb->GetBoardDesignSettings()->m_ViasMinSize,
m_mainWindow->m_InternalUnits );
PutValueInLocalUnits( *m_ui->m_SetMicroViakMinSizeCtrl,
TO_LEGACY_LU( m_pcb->GetBoardDesignSettings()->m_MinMicroVia.m_Diameter ),
m_pcb->GetBoardDesignSettings()->m_MicroViasMinSize,
m_mainWindow->m_InternalUnits );
#endif
m_ui->m_CreateRptCtrl->SetValue( m_doCreateRptFile );
m_ui->m_RptFilenameCtrl->SetValue( m_rptFilename );
......@@ -321,12 +312,12 @@ bool DRC::doNetClass( NETCLASS* nc, wxString& msg )
}
#endif
if( nc->GetTrackWidth() < TO_LEGACY_LU( g.m_TrackMinWidth ) )
if( nc->GetTrackWidth() < g.m_TrackMinWidth )
{
msg.Printf( _( "NETCLASS: '%s' has TrackWidth:%s which is less than global:%s" ),
GetChars( nc->GetName() ),
FmtVal( nc->GetTrackWidth() ),
FmtVal( TO_LEGACY_LU( g.m_TrackMinWidth ) )
FmtVal( g.m_TrackMinWidth )
);
m_currentMarker = fillMarker( DRCE_NETCLASS_TRACKWIDTH, msg, m_currentMarker );
......@@ -335,12 +326,12 @@ bool DRC::doNetClass( NETCLASS* nc, wxString& msg )
ret = false;
}
if( nc->GetViaDiameter() < TO_LEGACY_LU( g.m_MinVia.m_Diameter ) )
if( nc->GetViaDiameter() < g.m_ViasMinSize )
{
msg.Printf( _( "NETCLASS: '%s' has Via Dia:%s which is less than global:%s" ),
GetChars( nc->GetName() ),
FmtVal( nc->GetViaDiameter() ),
FmtVal( TO_LEGACY_LU( g.m_MinVia.m_Diameter ) )
FmtVal( g.m_ViasMinSize )
);
m_currentMarker = fillMarker( DRCE_NETCLASS_VIASIZE, msg, m_currentMarker );
......@@ -349,12 +340,12 @@ bool DRC::doNetClass( NETCLASS* nc, wxString& msg )
ret = false;
}
if( nc->GetViaDrill() < TO_LEGACY_LU( g.m_MinVia.m_Drill ) )
if( nc->GetViaDrill() < g.m_ViasMinDrill )
{
msg.Printf( _( "NETCLASS: '%s' has Via Drill:%s which is less than global:%s" ),
GetChars( nc->GetName() ),
FmtVal( nc->GetViaDrill() ),
FmtVal( TO_LEGACY_LU( g.m_MinVia.m_Drill ) )
FmtVal( g.m_ViasMinDrill )
);
m_currentMarker = fillMarker( DRCE_NETCLASS_VIADRILLSIZE, msg, m_currentMarker );
......@@ -363,12 +354,12 @@ bool DRC::doNetClass( NETCLASS* nc, wxString& msg )
ret = false;
}
if( nc->GetuViaDiameter() < TO_LEGACY_LU( g.m_MinMicroVia.m_Diameter ) )
if( nc->GetuViaDiameter() < g.m_MicroViasMinSize )
{
msg.Printf( _( "NETCLASS: '%s' has uVia Dia:%s which is less than global:%s" ),
GetChars( nc->GetName() ),
FmtVal( nc->GetuViaDiameter() ),
FmtVal( TO_LEGACY_LU( g.m_MinMicroVia.m_Diameter ) )
FmtVal( g.m_MicroViasMinSize )
);
m_currentMarker = fillMarker( DRCE_NETCLASS_uVIASIZE, msg, m_currentMarker );
......@@ -377,12 +368,12 @@ bool DRC::doNetClass( NETCLASS* nc, wxString& msg )
ret = false;
}
if( nc->GetuViaDrill() < TO_LEGACY_LU( g.m_MinMicroVia.m_Drill ) )
if( nc->GetuViaDrill() < g.m_MicroViasMinDrill )
{
msg.Printf( _( "NETCLASS: '%s' has uVia Drill:%s which is less than global:%s" ),
GetChars( nc->GetName() ),
FmtVal( nc->GetuViaDrill() ),
FmtVal( TO_LEGACY_LU( g.m_MinMicroVia.m_Drill ) )
FmtVal( g.m_MicroViasMinDrill )
);
m_currentMarker = fillMarker( DRCE_NETCLASS_uVIADRILLSIZE, msg, m_currentMarker );
......@@ -577,7 +568,7 @@ bool DRC::doPadToPadsDrc( D_PAD* aRefPad, D_PAD** aStart, D_PAD** aEnd, int x_li
MODULE dummymodule( m_pcb ); // Creates a dummy parent
D_PAD dummypad( &dummymodule );
dummypad.m_layerMask |= ALL_CU_LAYERS; // Ensure the hole is on all copper layers
dummypad.m_LocalClearance = FROM_LEGACY_LU( 1 ); /* Use the minimal local clearance value for the dummy pad
dummypad.m_LocalClearance = 1; /* Use the minimal local clearance value for the dummy pad
* the clearance of the active pad will be used
* as minimum distance to a hole
* (a value = 0 means use netclass value)
......@@ -592,7 +583,7 @@ bool DRC::doPadToPadsDrc( D_PAD* aRefPad, D_PAD** aStart, D_PAD** aEnd, int x_li
// We can stop the test when pad->m_Pos.x > x_limit
// because the list is sorted by X values
if( TO_LEGACY_LU( pad->m_Pos.x() ) > x_limit )
if( pad->m_Pos.x > x_limit )
break;
// No problem if pads are on different copper layers,
......@@ -617,7 +608,7 @@ bool DRC::doPadToPadsDrc( D_PAD* aRefPad, D_PAD** aStart, D_PAD** aEnd, int x_li
/* Here, we must test clearance between holes and pads
* dummy pad size and shape is adjusted to pad drill size and shape
*/
if( pad->m_Drill.x() != ZERO_LENGTH )
if( pad->m_Drill.x )
{
// pad under testing has a hole, test this hole against pad reference
dummypad.SetPosition( pad->GetPosition() );
......@@ -637,7 +628,7 @@ bool DRC::doPadToPadsDrc( D_PAD* aRefPad, D_PAD** aStart, D_PAD** aEnd, int x_li
}
}
if( aRefPad->m_Drill.x() != ZERO_LENGTH ) // pad reference has a hole
if( aRefPad->m_Drill.x ) // pad reference has a hole
{
dummypad.SetPosition( aRefPad->GetPosition() );
dummypad.m_Size = aRefPad->m_Drill;
......
pcbnew/drc_clearance_test_functions.cpp
View file @ cc097762
......@@ -290,7 +290,7 @@ bool DRC::doTrackDrc( TRACK* aRefSeg, TRACK* aStart, bool testPads )
* checkClearanceSegmToPad(),a pseudo pad is used, with a shape and a
* size like the hole
*/
if( pad->m_Drill.x() == ZERO_LENGTH )
if( pad->m_Drill.x == 0 )
continue;
dummypad.m_Size = pad->m_Drill;
......@@ -633,7 +633,7 @@ bool DRC::checkClearancePadToPad( D_PAD* aRefPad, D_PAD* aPad )
m_segmEnd.x = m_segmEnd.y = 0;
m_padToTestPos = relativePadPos;
diag = checkClearanceSegmToPad( aPad, TO_LEGACY_LU( aRefPad->m_Size.x() ), dist_min );
diag = checkClearanceSegmToPad( aPad, aRefPad->m_Size.x, dist_min );
break;
case PAD_RECT:
......@@ -644,7 +644,7 @@ bool DRC::checkClearancePadToPad( D_PAD* aRefPad, D_PAD* aPad )
if( aPad->m_PadShape == PAD_RECT )
{
wxSize size = TO_LEGACY_LU_WXS( aPad->m_Size );
wxSize size = aPad->m_Size;
// The trivial case is if both rects are rotated by multiple of 90 deg
// Most of time this is the case, and the test is fast
......@@ -664,10 +664,10 @@ bool DRC::checkClearancePadToPad( D_PAD* aRefPad, D_PAD* aPad )
relativePadPos.x = ABS( relativePadPos.x );
relativePadPos.y = ABS( relativePadPos.y );
if( ( relativePadPos.x - ( (size.x + TO_LEGACY_LU( aRefPad->m_Size.x() ) ) / 2 ) ) >= dist_min )
if( ( relativePadPos.x - ( (size.x + aRefPad->m_Size.x) / 2 ) ) >= dist_min )
diag = true;
if( ( relativePadPos.y - ( (size.y + TO_LEGACY_LU( aRefPad->m_Size.y() ) ) / 2 ) ) >= dist_min )
if( ( relativePadPos.y - ( (size.y + aRefPad->m_Size.y) / 2 ) ) >= dist_min )
diag = true;
}
else // at least one pad has any other orient. Test is more tricky
......@@ -716,15 +716,15 @@ bool DRC::checkClearancePadToPad( D_PAD* aRefPad, D_PAD* aPad )
int segm_width;
m_segmAngle = aRefPad->m_Orient; // Segment orient.
if( aRefPad->m_Size.y() < aRefPad->m_Size.x() ) // Build an horizontal equiv segment
if( aRefPad->m_Size.y < aRefPad->m_Size.x ) // Build an horizontal equiv segment
{
segm_width = TO_LEGACY_LU( aRefPad->m_Size.y() );
m_segmLength = TO_LEGACY_LU( aRefPad->m_Size.x() - aRefPad->m_Size.y() );
segm_width = aRefPad->m_Size.y;
m_segmLength = aRefPad->m_Size.x - aRefPad->m_Size.y;
}
else // Vertical oval: build an horizontal equiv segment and rotate 90.0 deg
{
segm_width = TO_LEGACY_LU( aRefPad->m_Size.x() );
m_segmLength = TO_LEGACY_LU( aRefPad->m_Size.y() - aRefPad->m_Size.x() );
segm_width = aRefPad->m_Size.x;
m_segmLength = aRefPad->m_Size.y - aRefPad->m_Size.x;
m_segmAngle += 900;
}
......@@ -796,13 +796,13 @@ bool DRC::checkClearanceSegmToPad( const D_PAD* aPad, int aSegmentWidth, int aMi
int segmHalfWidth = aSegmentWidth / 2;
seuil = segmHalfWidth + aMinDist;
padHalfsize.x = TO_LEGACY_LU( aPad->m_Size.x() / 2 );
padHalfsize.y = TO_LEGACY_LU( aPad->m_Size.y() / 2 );
padHalfsize.x = aPad->m_Size.x >> 1;
padHalfsize.y = aPad->m_Size.y >> 1;
if( aPad->m_PadShape == PAD_TRAPEZOID ) // The size is bigger, due to m_DeltaSize extra size
{
padHalfsize.x += TO_LEGACY_LU( abs( aPad->m_DeltaSize.y() ) / 2 ); // Remember: m_DeltaSize.y is the m_Size.x change
padHalfsize.y += TO_LEGACY_LU( abs( aPad->m_DeltaSize.x() ) / 2 ); // Remember: m_DeltaSize.x is the m_Size.y change
padHalfsize.x += ABS(aPad->m_DeltaSize.y) / 2; // Remember: m_DeltaSize.y is the m_Size.x change
padHalfsize.y += ABS(aPad->m_DeltaSize.x) / 2; // Remember: m_DeltaSize.x is the m_Size.y change
}
if( aPad->m_PadShape == PAD_CIRCLE )
......
pcbnew/drc_stuff.h
View file @ cc097762
......@@ -69,10 +69,10 @@
#define DRCE_TOO_SMALL_MICROVIA 29 ///< Too small micro via size
#define DRCE_NETCLASS_TRACKWIDTH 30 ///< netclass has TrackWidth < board.m_designSettings->m_TrackMinWidth
#define DRCE_NETCLASS_CLEARANCE 31 ///< netclass has Clearance < board.m_designSettings->m_TrackClearance
#define DRCE_NETCLASS_VIASIZE 32 ///< netclass has ViaSize < board.m_designSettings->m_MinVia.m_Diameter
#define DRCE_NETCLASS_VIADRILLSIZE 33 ///< netclass has ViaDrillSize < board.m_designSettings->m_MinVia.m_Drill
#define DRCE_NETCLASS_uVIASIZE 34 ///< netclass has ViaSize < board.m_designSettings->m_MinMicroVia.m_Diameter
#define DRCE_NETCLASS_uVIADRILLSIZE 35 ///< netclass has ViaSize < board.m_designSettings->m_MinMicroVia.m_Drill
#define DRCE_NETCLASS_VIASIZE 32 ///< netclass has ViaSize < board.m_designSettings->m_ViasMinSize
#define DRCE_NETCLASS_VIADRILLSIZE 33 ///< netclass has ViaDrillSize < board.m_designSettings->m_ViasMinDrill
#define DRCE_NETCLASS_uVIASIZE 34 ///< netclass has ViaSize < board.m_designSettings->m_MicroViasMinSize
#define DRCE_NETCLASS_uVIADRILLSIZE 35 ///< netclass has ViaSize < board.m_designSettings->m_MicroViasMinDrill
class EDA_DRAW_PANEL;
......
pcbnew/editmod.cpp
View file @ cc097762
......@@ -82,7 +82,7 @@ void FOOTPRINT_EDIT_FRAME::Place_Ancre( MODULE* pt_mod )
for( ; pt_pad != NULL; pt_pad = pt_pad->Next() )
{
pt_pad->m_Pos0 += VECTOR_PCB::fromXY( FROM_LEGACY_LU( moveVector.x ), FROM_LEGACY_LU( moveVector.y ) );
pt_pad->m_Pos0 += moveVector;
}
/* Update the draw element coordinates. */
......@@ -93,7 +93,7 @@ void FOOTPRINT_EDIT_FRAME::Place_Ancre( MODULE* pt_mod )
switch( PtStruct->Type() )
{
case PCB_MODULE_EDGE_T:
#undef STRUCT /// @BUG: unsafe type cast
#undef STRUCT
#define STRUCT ( (EDGE_MODULE*) PtStruct )
STRUCT->m_Start0 += moveVector;
STRUCT->m_End0 += moveVector;
......
pcbnew/editrack.cpp
View file @ cc097762
......@@ -125,7 +125,7 @@ TRACK* PCB_EDIT_FRAME::Begin_Route( TRACK* aTrack, wxDC* aDC )
pt_pad = (D_PAD*) LockPoint;
/* A pad is found: put the starting point on pad center */
pos = TO_LEGACY_LU_WXP( pt_pad->m_Pos );
pos = pt_pad->m_Pos;
GetBoard()->SetHighLightNet( pt_pad->GetNet() );
}
else /* A track segment is found */
......@@ -783,7 +783,7 @@ void ShowNewTrackWhenMovingCursor( EDA_DRAW_PANEL* aPanel, wxDC* aDC, const wxPo
if( g_FirstTrackSegment->GetState( BEGIN_ONPAD ) )
{
D_PAD * pad = (D_PAD *) g_FirstTrackSegment->start;
lenDie = TO_LEGACY_LU_DBL( pad->m_LengthDie );
lenDie = (double) pad->m_LengthDie;
}
// calculate track len on board:
......@@ -1067,7 +1067,7 @@ void DeleteNullTrackSegments( BOARD* pcb, DLIST<TRACK>& aTrackList )
*/
void EnsureEndTrackOnPad( D_PAD* Pad )
{
if( g_CurrentTrackSegment->m_End == TO_LEGACY_LU_WXP( Pad->m_Pos ) ) // Ok !
if( g_CurrentTrackSegment->m_End == Pad->m_Pos ) // Ok !
{
g_CurrentTrackSegment->end = Pad;
g_CurrentTrackSegment->SetState( END_ONPAD, ON );
......@@ -1084,7 +1084,7 @@ void EnsureEndTrackOnPad( D_PAD* Pad )
lasttrack->end = g_CurrentTrackSegment;
}
g_CurrentTrackSegment->m_End = TO_LEGACY_LU_WXP( Pad->m_Pos );
g_CurrentTrackSegment->m_End = Pad->m_Pos;
g_CurrentTrackSegment->SetState( END_ONPAD, OFF );
g_CurrentTrackSegment->end = Pad;
......
pcbnew/export_gencad.cpp
View file @ cc097762
......@@ -252,70 +252,70 @@ void CreatePadsShapesSection( FILE* file, BOARD* pcb )
fprintf( file, "PAD PAD%d", pad->GetSubRatsnest() );
int dx = TO_LEGACY_LU( pad->m_Size.x() / 2 );
int dy = TO_LEGACY_LU( pad->m_Size.y() / 2 );
int dx = pad->m_Size.x / 2;
int dy = pad->m_Size.y / 2;
switch( pad->m_PadShape )
{
default:
case PAD_CIRCLE:
pad_type = "ROUND"; // how about oval holes?
fprintf( file, " %s %d\n", pad_type, ( int )TO_LEGACY_LU( pad->m_Drill.x() ) );
pad_type = "ROUND";
fprintf( file, " %s %d\n", pad_type, pad->m_Drill.x );
fprintf( file, "CIRCLE %d %d %d\n",
TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ), dx );
pad->m_Offset.x, -pad->m_Offset.y, dx );
break;
case PAD_RECT:
pad_type = "RECTANGULAR";
fprintf( file, " %s %d\n", pad_type, ( int )TO_LEGACY_LU( pad->m_Drill.x() ) );
fprintf( file, " %s %d\n", pad_type, pad->m_Drill.x );
fprintf( file, "RECTANGLE %d %d %d %d\n",
TO_LEGACY_LU( pad->m_Offset.x() ) - dx, -TO_LEGACY_LU( pad->m_Offset.y() ) - dy,
TO_LEGACY_LU( pad->m_Size.x() ), TO_LEGACY_LU( pad->m_Size.y() ) );
pad->m_Offset.x - dx, -pad->m_Offset.y - dy,
pad->m_Size.x, pad->m_Size.y );
break;
case PAD_OVAL: /* Create outline by 2 lines and 2 arcs */
{
pad_type = "FINGER";
fprintf( file, " %s %d\n", pad_type, ( int )TO_LEGACY_LU( pad->m_Drill.x() ) );
fprintf( file, " %s %d\n", pad_type, pad->m_Drill.x );
int dr = dx - dy;
if( dr >= 0 ) // Horizontal oval
{
int radius = dy;
fprintf( file, "LINE %d %d %d %d\n",
-dr + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) - radius,
dr + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) - radius );
-dr + pad->m_Offset.x, -pad->m_Offset.y - radius,
dr + pad->m_Offset.x, -pad->m_Offset.y - radius );
fprintf( file, "ARC %d %d %d %d %d %d\n",
dr + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) - radius,
dr + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) + radius,
dr + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) );
dr + pad->m_Offset.x, -pad->m_Offset.y - radius,
dr + pad->m_Offset.x, -pad->m_Offset.y + radius,
dr + pad->m_Offset.x, -pad->m_Offset.y );
fprintf( file, "LINE %d %d %d %d\n",
dr + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) + radius,
-dr + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) + radius );
dr + pad->m_Offset.x, -pad->m_Offset.y + radius,
-dr + pad->m_Offset.x, -pad->m_Offset.y + radius );
fprintf( file, "ARC %d %d %d %d %d %d\n",
-dr + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) + radius,
-dr + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) - radius,
-dr + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) );
-dr + pad->m_Offset.x, -pad->m_Offset.y + radius,
-dr + pad->m_Offset.x, -pad->m_Offset.y - radius,
-dr + pad->m_Offset.x, -pad->m_Offset.y );
}
else // Vertical oval
{
dr = -dr;
int radius = dx;
fprintf( file, "LINE %d %d %d %d\n",
-radius + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) - dr,
-radius + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) + dr );
-radius + pad->m_Offset.x, -pad->m_Offset.y - dr,
-radius + pad->m_Offset.x, -pad->m_Offset.y + dr );
fprintf( file, "ARC %d %d %d %d %d %d\n",
-radius + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) + dr,
radius + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) + dr,
TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) + dr );
-radius + pad->m_Offset.x, -pad->m_Offset.y + dr,
radius + pad->m_Offset.x, -pad->m_Offset.y + dr,
pad->m_Offset.x, -pad->m_Offset.y + dr );
fprintf( file, "LINE %d %d %d %d\n",
radius + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) + dr,
radius + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) - dr );
radius + pad->m_Offset.x, -pad->m_Offset.y + dr,
radius + pad->m_Offset.x, -pad->m_Offset.y - dr );
fprintf( file, "ARC %d %d %d %d %d %d\n",
radius + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) - dr,
-radius + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) - dr,
TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) - dr );
radius + pad->m_Offset.x, -pad->m_Offset.y - dr,
-radius + pad->m_Offset.x, -pad->m_Offset.y - dr,
pad->m_Offset.x, -pad->m_Offset.y - dr );
}
break;
}
......@@ -410,7 +410,7 @@ void CreateShapesSection( FILE* file, BOARD* pcb )
NORMALIZE_ANGLE_POS( orient );
fprintf( file, "PIN %s PAD%d %d %d %s %d %s",
TO_UTF8( pinname ), pad->GetSubRatsnest(),
TO_LEGACY_LU( pad->m_Pos0.x() ), TO_LEGACY_LU( -pad->m_Pos0.y() ),
pad->m_Pos0.x, -pad->m_Pos0.y,
layer, orient / 10, mirror );
if( orient % 10 )
......
pcbnew/export_vrml.cpp
View file @ cc097762
......@@ -881,11 +881,11 @@ static void export_vrml_edge_module( EDGE_MODULE* module ) /*{{{*/
static void export_vrml_pad( BOARD* pcb, D_PAD* pad ) /*{{{*/
{
double hole_drill_w = (double) TO_LEGACY_LU_DBL( pad->m_Drill.x() / 2 );
double hole_drill_h = (double) TO_LEGACY_LU_DBL( pad->m_Drill.y() / 2 );
double hole_drill_w = (double) pad->m_Drill.x / 2;
double hole_drill_h = (double) pad->m_Drill.y / 2;
double hole_drill = MIN( hole_drill_w, hole_drill_h );
double hole_x = TO_LEGACY_LU_DBL( pad->m_Pos.x() );
double hole_y = TO_LEGACY_LU_DBL( pad->m_Pos.y() );
double hole_x = pad->m_Pos.x;
double hole_y = pad->m_Pos.y;
/* Export the hole on the edge layer */
if( hole_drill > 0 )
......@@ -913,11 +913,11 @@ static void export_vrml_pad( BOARD* pcb, D_PAD* pad ) /*{{{*/
wxPoint pad_pos = pad->ReturnShapePos();
double pad_x = pad_pos.x;
double pad_y = pad_pos.y;
wxSize pad_delta = TO_LEGACY_LU_WXS( pad->m_DeltaSize );
wxSize pad_delta = pad->m_DeltaSize;
double pad_dx = pad_delta.x / 2;
double pad_dy = pad_delta.y / 2;
double pad_w = TO_LEGACY_LU_DBL( pad->m_Size.x() / 2 );
double pad_h = TO_LEGACY_LU_DBL( pad->m_Size.y() / 2 );
double pad_w = pad->m_Size.x / 2;
double pad_h = pad->m_Size.y / 2;
for( int layer = FIRST_COPPER_LAYER; layer < copper_layers; layer++ )
{
......
pcbnew/gen_holes_and_tools_lists_for_drill.cpp
View file @ cc097762
......@@ -127,22 +127,21 @@ void Build_Holes_List( BOARD* aPcb,
if( aGenerateNPTH_list && pad->m_Attribut != PAD_HOLE_NOT_PLATED )
continue;
if( pad->m_Drill.x() == ZERO_LENGTH )
if( pad->m_Drill.x == 0 )
continue;
new_hole.m_Hole_NotPlated = (pad->m_Attribut == PAD_HOLE_NOT_PLATED);
new_hole.m_Tool_Reference = -1; // Flag is: Not initialized
new_hole.m_Hole_Orient = pad->m_Orient;
new_hole.m_Hole_Shape = 0; // hole shape: round
new_hole.m_Hole_Diameter = min( TO_LEGACY_LU( pad->m_Drill.x() ), TO_LEGACY_LU( pad->m_Drill.y() ) );
new_hole.m_Hole_Diameter = min( pad->m_Drill.x, pad->m_Drill.y );
new_hole.m_Hole_Size.x = new_hole.m_Hole_Size.y = new_hole.m_Hole_Diameter;
if( pad->m_DrillShape != PAD_CIRCLE )
new_hole.m_Hole_Shape = 1; // oval flag set
new_hole.m_Hole_Size.x = TO_LEGACY_LU( pad->m_Drill.x() );
new_hole.m_Hole_Size.y = TO_LEGACY_LU( pad->m_Drill.y() );
new_hole.m_Hole_Pos = TO_LEGACY_LU_WXP( pad->m_Pos ); // hole position
new_hole.m_Hole_Size = pad->m_Drill;
new_hole.m_Hole_Pos = pad->m_Pos; // hole position
new_hole.m_Hole_Bottom_Layer = LAYER_N_BACK;
new_hole.m_Hole_Top_Layer = LAYER_N_FRONT;// pad holes are through holes
aHoleListBuffer.push_back( new_hole );
......
pcbnew/gen_modules_placefile.cpp
View file @ cc097762
......@@ -438,20 +438,19 @@ void PCB_EDIT_FRAME::GenModuleReport( wxCommandEvent& event )
{
fprintf( rptfile, "$PAD \"%.4s\"\n", pad->m_Padname );
sprintf( line, "position %9.6f %9.6f\n",
TO_LEGACY_LU_DBL( pad->m_Pos0.x() ) * conv_unit,
TO_LEGACY_LU_DBL( pad->m_Pos0.y() ) * conv_unit );
pad->m_Pos0.x * conv_unit,
pad->m_Pos0.y * conv_unit );
fputs( line, rptfile );
sprintf( line, "size %9.6f %9.6f\n",
TO_LEGACY_LU_DBL( pad->m_Size.x() ) * conv_unit,
TO_LEGACY_LU_DBL( pad->m_Size.y() ) * conv_unit );
pad->m_Size.x * conv_unit,
pad->m_Size.y * conv_unit );
fputs( line, rptfile );
sprintf( line, "drill %9.6f\n",
TO_LEGACY_LU_DBL( pad->m_Drill.x() ) * conv_unit );
sprintf( line, "drill %9.6f\n", pad->m_Drill.x * conv_unit );
fputs( line, rptfile );
sprintf( line, "shape_offset %9.6f %9.6f\n",
TO_LEGACY_LU_DBL( pad->m_Offset.x() ) * conv_unit,
TO_LEGACY_LU_DBL( pad->m_Offset.y() ) * conv_unit );
pad->m_Offset.x * conv_unit,
pad->m_Offset.y * conv_unit );
fputs( line, rptfile );
sprintf( line, "orientation %.2f\n",
......
pcbnew/globaleditpad.cpp
View file @ cc097762
......@@ -254,19 +254,19 @@ void PCB_BASE_FRAME::Global_Import_Pad_Settings( D_PAD* aPad, bool aDraw )
if( pt_pad->m_PadShape != PAD_TRAPEZOID )
{
pt_pad->m_DeltaSize.x( ZERO_LENGTH );
pt_pad->m_DeltaSize.y( ZERO_LENGTH );
pt_pad->m_DeltaSize.x = 0;
pt_pad->m_DeltaSize.y = 0;
}
if( pt_pad->m_PadShape == PAD_CIRCLE )
pt_pad->m_Size.y( pt_pad->m_Size.x() );
pt_pad->m_Size.y = pt_pad->m_Size.x;
switch( pt_pad->m_Attribut & 0x7F )
{
case PAD_SMD:
case PAD_CONN:
pt_pad->m_Drill = VECTOR_PCB::fromXY(ZERO_LENGTH, ZERO_LENGTH);//wxSize( 0, 0 );
pt_pad->m_Offset.x( ZERO_LENGTH );
pt_pad->m_Offset.y( ZERO_LENGTH );
pt_pad->m_Drill = wxSize( 0, 0 );
pt_pad->m_Offset.x = 0;
pt_pad->m_Offset.y = 0;
break;
default:
......
pcbnew/gpcb_exchange.cpp
View file @ cc097762
......@@ -369,14 +369,16 @@ bool MODULE::Read_GPCB_Descr( const wxString& CmpFullFileName )
{
Pad->SetPadName( params[10] );
}
Pad->m_Size.x( FROM_LEGACY_LU( ibuf[4] + abs( ibuf[0] - ibuf[2] ) ) );
Pad->m_Size.y( FROM_LEGACY_LU( ibuf[4] + abs( ibuf[1] - ibuf[3] ) ) );
Pad->m_Pos.x( FROM_LEGACY_LU( (ibuf[0] + ibuf[2]) / 2 + m_Pos.x ) );
Pad->m_Pos.y( FROM_LEGACY_LU( (ibuf[1] + ibuf[3]) / 2 + m_Pos.y ) );
Pad->m_Pos.x = (ibuf[0] + ibuf[2]) / 2;
Pad->m_Pos.y = (ibuf[1] + ibuf[3]) / 2;
Pad->m_Size.x = ibuf[4] + abs( ibuf[0] - ibuf[2] );
Pad->m_Size.y = ibuf[4] + abs( ibuf[1] - ibuf[3] );
Pad->m_Pos.x += m_Pos.x;
Pad->m_Pos.y += m_Pos.y;
if( !TestFlags( params[iflgidx], 0x0100, wxT( "square" ) ) )
{
if( Pad->m_Size.x() == Pad->m_Size.y() )
if( Pad->m_Size.x == Pad->m_Size.y )
Pad->m_PadShape = PAD_ROUND;
else
Pad->m_PadShape = PAD_OVAL;
......@@ -426,14 +428,14 @@ bool MODULE::Read_GPCB_Descr( const wxString& CmpFullFileName )
Pad->SetPadName( params[9] );
}
Pad->m_Drill.x( FROM_LEGACY_LU( (int) ibuf[5] ) );
Pad->m_Drill.y( Pad->m_Drill.x() );
Pad->m_Size.x( FROM_LEGACY_LU( ibuf[3] ) + Pad->m_Drill.x() );
Pad->m_Size.y( Pad->m_Size.x() );
Pad->m_Pos.x( FROM_LEGACY_LU( ibuf[0] + m_Pos.x ) );
Pad->m_Pos.y( FROM_LEGACY_LU( ibuf[1] + m_Pos.y ) );
Pad->m_Pos.x = ibuf[0];
Pad->m_Pos.y = ibuf[1];
Pad->m_Drill.x = Pad->m_Drill.y = ibuf[5];
Pad->m_Size.x = Pad->m_Size.y = ibuf[3] + Pad->m_Drill.x;
Pad->m_Pos.x += m_Pos.x;
Pad->m_Pos.y += m_Pos.y;
if( (Pad->m_PadShape == PAD_ROUND) && (Pad->m_Size.x() != Pad->m_Size.y()) )
if( (Pad->m_PadShape == PAD_ROUND) && (Pad->m_Size.x != Pad->m_Size.y) )
Pad->m_PadShape = PAD_OVAL;
m_Pads.PushBack( Pad );
......
pcbnew/graphpcb.cpp
View file @ cc097762
......@@ -89,7 +89,7 @@ void PlacePad( BOARD* Pcb, D_PAD* pt_pad, int color, int marge, int op_logic )
int dx, dy;
wxPoint shape_pos = pt_pad->ReturnShapePos();
dx = TO_LEGACY_LU( pt_pad->m_Size.x() / 2 );
dx = pt_pad->m_Size.x / 2;
dx += marge;
if( pt_pad->m_PadShape == PAD_CIRCLE )
......@@ -100,13 +100,13 @@ void PlacePad( BOARD* Pcb, D_PAD* pt_pad, int color, int marge, int op_logic )
}
dy = TO_LEGACY_LU( pt_pad->m_Size.y() / 2 );
dy = pt_pad->m_Size.y / 2;
dy += marge;
if( pt_pad->m_PadShape == PAD_TRAPEZOID )
{
dx += TO_LEGACY_LU( abs( pt_pad->m_DeltaSize.y() ) / 2 );
dy += TO_LEGACY_LU( abs( pt_pad->m_DeltaSize.x() ) / 2 );
dx += abs( pt_pad->m_DeltaSize.y ) / 2;
dy += abs( pt_pad->m_DeltaSize.x ) / 2;
}
if( ( pt_pad->m_Orient % 900 ) == 0 ) /* The pad is a rectangle
......
pcbnew/ioascii.cpp
View file @ cc097762
......@@ -436,21 +436,20 @@ int PCB_BASE_FRAME::ReadSetup( LINE_READER* aReader )
if( stricmp( line, "TrackWidthList" ) == 0 )
{
//double tmp = atof( data );
GetBoard()->m_TrackWidthList.push_back( LENGTH_LOAD_STR( data ) );
int tmp = atoi( data );
GetBoard()->m_TrackWidthList.push_back( tmp );
continue;
}
if( stricmp( line, "TrackClearence" ) == 0 )
{
netclass_default->Clearance( LENGTH_LOAD_STR( data ) );
netclass_default->SetClearance( atoi( data ) );
continue;
}
if( stricmp( line, "TrackMinWidth" ) == 0 )
{
//double width = atof( data );
GetBoard()->GetBoardDesignSettings()->m_TrackMinWidth = LENGTH_LOAD_STR( data );
GetBoard()->GetBoardDesignSettings()->m_TrackMinWidth = atoi( data );
continue;
}
......@@ -479,8 +478,7 @@ int PCB_BASE_FRAME::ReadSetup( LINE_READER* aReader )
if( stricmp( line, "ViaMinSize" ) == 0 )
{
//double diameter = atof( data );
GetBoard()->GetBoardDesignSettings()->m_MinVia.m_Diameter = LENGTH_LOAD_STR( data );
GetBoard()->GetBoardDesignSettings()->m_ViasMinSize = atoi( data );
continue;
}
......@@ -491,23 +489,21 @@ int PCB_BASE_FRAME::ReadSetup( LINE_READER* aReader )
if( stricmp( line, "MicroViaMinSize" ) == 0 )
{
//double diameter = atof( data );
GetBoard()->GetBoardDesignSettings()->m_MinMicroVia.m_Diameter = LENGTH_LOAD_STR( data );
GetBoard()->GetBoardDesignSettings()->m_MicroViasMinSize = atoi( data );
continue;
}
if( stricmp( line, "ViaSizeList" ) == 0 )
{
//double tmp = atof( data );
int tmp = atoi( data );
VIA_DIMENSION via_dim;
via_dim.m_Diameter = LENGTH_LOAD_STR( data );
via_dim.m_Diameter = tmp;
data = strtok( NULL, " \n\r" );
if( data )
{
//tmp = atof( data );
LENGTH_PCB tmp = LENGTH_LOAD_STR( data );
via_dim.m_Drill = tmp > ZERO_LENGTH ? tmp : ZERO_LENGTH;
tmp = atoi( data );
via_dim.m_Drill = tmp > 0 ? tmp : 0;
}
GetBoard()->m_ViasDimensionsList.push_back( via_dim );
......@@ -516,31 +512,28 @@ int PCB_BASE_FRAME::ReadSetup( LINE_READER* aReader )
if( stricmp( line, "ViaDrill" ) == 0 )
{
VIA_DIMENSION via = netclass_default->Via();
via.m_Drill = LENGTH_LOAD_STR( data );
netclass_default->Via( via );
int diameter = atoi( data );
netclass_default->SetViaDrill( diameter );
continue;
}
if( stricmp( line, "ViaMinDrill" ) == 0 )
{
//double diameter = atof( data );
GetBoard()->GetBoardDesignSettings()->m_MinVia.m_Drill = LENGTH_LOAD_STR( data );
GetBoard()->GetBoardDesignSettings()->m_ViasMinDrill = atoi( data );
continue;
}
if( stricmp( line, "MicroViaDrill" ) == 0 )
{
VIA_DIMENSION via = netclass_default->MicroVia();
via.m_Drill = LENGTH_LOAD_STR( data );
netclass_default->MicroVia( via );
int diameter = atoi( data );
netclass_default->SetuViaDrill( diameter );
continue;
}
if( stricmp( line, "MicroViaMinDrill" ) == 0 )
{
//double diameter = atof( data );
GetBoard()->GetBoardDesignSettings()->m_MinMicroVia.m_Drill = LENGTH_LOAD_STR( data );
int diameter = atoi( data );
GetBoard()->GetBoardDesignSettings()->m_MicroViasMinDrill = diameter;
continue;
}
......@@ -586,16 +579,16 @@ int PCB_BASE_FRAME::ReadSetup( LINE_READER* aReader )
if( stricmp( line, "PadSize" ) == 0 )
{
g_Pad_Master.m_Size.x( LENGTH_LOAD_STR( data ) );
g_Pad_Master.m_Size.x = atoi( data );
data = strtok( NULL, delims );
g_Pad_Master.m_Size.y( LENGTH_LOAD_STR( data ) );
g_Pad_Master.m_Size.y = atoi( data );
continue;
}
if( stricmp( line, "PadDrill" ) == 0 )
{
g_Pad_Master.m_Drill.x( LENGTH_LOAD_STR( data ) );
g_Pad_Master.m_Drill.y( g_Pad_Master.m_Drill.x() );
g_Pad_Master.m_Drill.x = atoi( data );
g_Pad_Master.m_Drill.y = g_Pad_Master.m_Drill.x;
continue;
}
......@@ -696,57 +689,41 @@ static int WriteSetup( FILE* aFile, PCB_EDIT_FRAME* aFrame, BOARD* aBoard )
// Save custom tracks width list (the first is not saved here: this is the netclass value
for( unsigned ii = 1; ii < aBoard->m_TrackWidthList.size(); ii++ )
fprintf( aFile, "TrackWidthList "FM_LENSV"\n", ARG_LENSV( aBoard->m_TrackWidthList[ii] ) );
fprintf( aFile, "TrackWidthList %d\n", aBoard->m_TrackWidthList[ii] );
fprintf( aFile,
"TrackClearence "FM_LENSV"\n",
ARG_LENSV( netclass_default->Clearance() ) );
fprintf( aFile, "TrackClearence %d\n", netclass_default->GetClearance() );
fprintf( aFile, "ZoneClearence %d\n", g_Zone_Default_Setting.m_ZoneClearance );
fprintf( aFile,
"TrackMinWidth "FM_LENSV"\n",
ARG_LENSV( aBoard->GetBoardDesignSettings()->m_TrackMinWidth ) );
fprintf( aFile, "TrackMinWidth %d\n", aBoard->GetBoardDesignSettings()->m_TrackMinWidth );
fprintf( aFile, "DrawSegmWidth %d\n", aBoard->GetBoardDesignSettings()->m_DrawSegmentWidth );
fprintf( aFile, "EdgeSegmWidth %d\n", aBoard->GetBoardDesignSettings()->m_EdgeSegmentWidth );
// Save current default via size, for compatibility with older Pcbnew version;
fprintf( aFile,
"ViaSize "FM_LENSV"\n",
ARG_LENSV( netclass_default->Via().m_Diameter ) );
fprintf( aFile,
"ViaDrill "FM_LENSV"\n",
ARG_LENSV( netclass_default->Via().m_Drill ) );
fprintf( aFile,
"ViaMinSize "FM_LENSV"\n",
ARG_LENSV( aBoard->GetBoardDesignSettings()->m_MinVia.m_Diameter ) );
fprintf( aFile,
"ViaMinDrill "FM_LENSV"\n",
ARG_LENSV( aBoard->GetBoardDesignSettings()->m_MinVia.m_Drill ) );
fprintf( aFile, "ViaSize %d\n", netclass_default->GetViaDiameter() );
fprintf( aFile, "ViaDrill %d\n", netclass_default->GetViaDrill() );
fprintf( aFile, "ViaMinSize %d\n", aBoard->GetBoardDesignSettings()->m_ViasMinSize );
fprintf( aFile, "ViaMinDrill %d\n", aBoard->GetBoardDesignSettings()->m_ViasMinDrill );
// Save custom vias diameters list (the first is not saved here: this is
// the netclass value
for( unsigned ii = 1; ii < aBoard->m_ViasDimensionsList.size(); ii++ )
fprintf( aFile, "ViaSizeList "FM_LENSV" "FM_LENSV"\n",
ARG_LENSV( aBoard->m_ViasDimensionsList[ii].m_Diameter ),
ARG_LENSV( aBoard->m_ViasDimensionsList[ii].m_Drill ) );
fprintf( aFile, "ViaSizeList %d %d\n",
aBoard->m_ViasDimensionsList[ii].m_Diameter,
aBoard->m_ViasDimensionsList[ii].m_Drill );
// for old versions compatibility:
fprintf( aFile,
"MicroViaSize "FM_LENSV"\n",
ARG_LENSV( netclass_default->MicroVia().m_Diameter ) );
fprintf( aFile,
"MicroViaDrill "FM_LENSV"\n",
ARG_LENSV( netclass_default->MicroVia().m_Drill ) );
fprintf( aFile, "MicroViaSize %d\n", netclass_default->GetuViaDiameter() );
fprintf( aFile, "MicroViaDrill %d\n", netclass_default->GetuViaDrill() );
fprintf( aFile,
"MicroViasAllowed %d\n",
aBoard->GetBoardDesignSettings()->m_MicroViasAllowed );
fprintf( aFile,
"MicroViaMinSize "FM_LENSV"\n",
ARG_LENSV( aBoard->GetBoardDesignSettings()->m_MinMicroVia.m_Diameter ) );
"MicroViaMinSize %d\n",
aBoard->GetBoardDesignSettings()->m_MicroViasMinSize );
fprintf( aFile,
"MicroViaMinDrill "FM_LENSV"\n",
ARG_LENSV( aBoard->GetBoardDesignSettings()->m_MinMicroVia.m_Drill ) );
"MicroViaMinDrill %d\n",
aBoard->GetBoardDesignSettings()->m_MicroViasMinDrill );
fprintf( aFile, "TextPcbWidth %d\n", aBoard->GetBoardDesignSettings()->m_PcbTextWidth );
fprintf( aFile,
......@@ -757,8 +734,8 @@ static int WriteSetup( FILE* aFile, PCB_EDIT_FRAME* aFrame, BOARD* aBoard )
fprintf( aFile, "EdgeModWidth %d\n", g_ModuleSegmentWidth );
fprintf( aFile, "TextModSize %d %d\n", g_ModuleTextSize.x, g_ModuleTextSize.y );
fprintf( aFile, "TextModWidth %d\n", g_ModuleTextWidth );
fprintf( aFile, "PadSize "FM_LENSV" "FM_LENSV"\n", ARG_LENSV( g_Pad_Master.m_Size.x() ), ARG_LENSV( g_Pad_Master.m_Size.y() ) );
fprintf( aFile, "PadDrill "FM_LENSV"\n", ARG_LENSV( g_Pad_Master.m_Drill.x() ) );
fprintf( aFile, "PadSize %d %d\n", g_Pad_Master.m_Size.x, g_Pad_Master.m_Size.y );
fprintf( aFile, "PadDrill %d\n", g_Pad_Master.m_Drill.x );
fprintf( aFile,
"Pad2MaskClearance %d\n",
aBoard->GetBoardDesignSettings()->m_SolderMaskMargin );
......
pcbnew/magnetic_tracks_functions.cpp
View file @ cc097762
......@@ -165,7 +165,7 @@ bool Magnetize( BOARD* m_Pcb, PCB_EDIT_FRAME* frame, int aCurrentTool, wxSize gr
if( doCheckNet && currTrack && currTrack->GetNet() != pad->GetNet() )
return false;
*curpos = TO_LEGACY_LU_WXP( pad->m_Pos );
*curpos = pad->m_Pos;
return true;
}
}
......
pcbnew/modedit.cpp
View file @ cc097762
......@@ -692,7 +692,7 @@ void FOOTPRINT_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
DrawPanel->Refresh();
}
// TODO: this should be refactored in the name of good programming style
void FOOTPRINT_EDIT_FRAME::Transform( MODULE* module, int transform )
{
D_PAD* pad = module->m_Pads;
......@@ -710,16 +710,9 @@ void FOOTPRINT_EDIT_FRAME::Transform( MODULE* module, int transform )
{
pad->m_Pos0 = pad->m_Pos;
pad->m_Orient -= angle;
wxPoint of;
of.x = TO_LEGACY_LU( pad->m_Offset.x() );
of.y = TO_LEGACY_LU( pad->m_Offset.y() );
RotatePoint( &of.x, &of.y, angle );
pad->m_Offset.x( FROM_LEGACY_LU( of.x ) );
pad->m_Offset.y( FROM_LEGACY_LU( of.y ) );
EXCHG( pad->m_Size[0], pad->m_Size[1] ); /// @TODO: make it using geom. transform
wxSize delta = TO_LEGACY_LU_WXS( pad->m_DeltaSize );
RotatePoint( &delta.x, &delta.y, -angle );
pad->m_DeltaSize = VECTOR_PCB::fromXY( FROM_LEGACY_LU( delta.x ), FROM_LEGACY_LU( delta.y ) );
RotatePoint( &pad->m_Offset.x, &pad->m_Offset.y, angle );
EXCHG( pad->m_Size.x, pad->m_Size.y );
RotatePoint( &pad->m_DeltaSize.x, &pad->m_DeltaSize.y, -angle );
}
module->m_Reference->m_Pos0 = module->m_Reference->m_Pos;
......@@ -756,10 +749,10 @@ void FOOTPRINT_EDIT_FRAME::Transform( MODULE* module, int transform )
case ID_MODEDIT_MODULE_MIRROR:
for( ; pad != NULL; pad = (D_PAD*) pad->Next() )
{
pad->m_Pos.y( -pad->m_Pos.y() );
pad->m_Pos0.y( -pad->m_Pos0.y() );
pad->m_Offset.y( -pad->m_Offset.y() );
pad->m_DeltaSize.y( -pad->m_DeltaSize.y() );
NEGATE( pad->m_Pos.y );
NEGATE( pad->m_Pos0.y );
NEGATE( pad->m_Offset.y );
NEGATE( pad->m_DeltaSize.y );
if( pad->m_Orient )
pad->m_Orient = 3600 - pad->m_Orient;
......
pcbnew/move-drag_pads.cpp
View file @ cc097762
......@@ -23,7 +23,7 @@
static D_PAD* s_CurrentSelectedPad;
static VECTOR_PCB Pad_OldPos;
static wxPoint Pad_OldPos;
/* Cancel move pad command.
......@@ -76,7 +76,7 @@ static void Show_Pad_Move( EDA_DRAW_PANEL* aPanel, wxDC* aDC, const wxPoint& aPo
if( aErase )
pad->Draw( aPanel, aDC, GR_XOR );
pad->m_Pos = FROM_LEGACY_LU_VEC( screen->GetCrossHairPosition() );
pad->m_Pos = screen->GetCrossHairPosition();
pad->Draw( aPanel, aDC, GR_XOR );
if( !g_Drag_Pistes_On )
......@@ -91,12 +91,12 @@ static void Show_Pad_Move( EDA_DRAW_PANEL* aPanel, wxDC* aDC, const wxPoint& aPo
if( g_DragSegmentList[ii].m_Pad_Start )
{
Track->m_Start = TO_LEGACY_LU_WXP( pad->m_Pos );
Track->m_Start = pad->m_Pos;
}
if( g_DragSegmentList[ii].m_Pad_End )
{
Track->m_End = TO_LEGACY_LU_WXP( pad->m_Pos );
Track->m_End = pad->m_Pos;
}
Track->Draw( aPanel, aDC, GR_XOR );
......@@ -148,7 +148,7 @@ void PCB_BASE_FRAME::Import_Pad_Settings( D_PAD* aPad, bool aDraw )
aPad->m_Orient = g_Pad_Master.m_Orient +
( (MODULE*) aPad->GetParent() )->m_Orient;
aPad->m_Size = g_Pad_Master.m_Size;
aPad->m_DeltaSize = VECTOR_PCB::fromXY( ZERO_LENGTH, ZERO_LENGTH );//wxSize( 0, 0 );
aPad->m_DeltaSize = wxSize( 0, 0 );
aPad->m_Offset = g_Pad_Master.m_Offset;
aPad->m_Drill = g_Pad_Master.m_Drill;
aPad->m_DrillShape = g_Pad_Master.m_DrillShape;
......@@ -160,7 +160,7 @@ void PCB_BASE_FRAME::Import_Pad_Settings( D_PAD* aPad, bool aDraw )
break;
case PAD_CIRCLE:
aPad->m_Size.y( aPad->m_Size.x() );
aPad->m_Size.y = aPad->m_Size.x;
break;
}
......@@ -168,8 +168,9 @@ void PCB_BASE_FRAME::Import_Pad_Settings( D_PAD* aPad, bool aDraw )
{
case PAD_SMD:
case PAD_CONN:
aPad->m_Drill = VECTOR_PCB::fromXY( ZERO_LENGTH, ZERO_LENGTH ); //wxSize( 0, 0 );
aPad->m_Offset = VECTOR_PCB::fromXY( ZERO_LENGTH, ZERO_LENGTH );
aPad->m_Drill = wxSize( 0, 0 );
aPad->m_Offset.x = 0;
aPad->m_Offset.y = 0;
}
aPad->ComputeShapeMaxRadius();
......@@ -200,14 +201,12 @@ void PCB_BASE_FRAME::AddPad( MODULE* Module, bool draw )
Import_Pad_Settings( Pad, false );
Pad->SetNetname( wxEmptyString );
Pad->m_Pos = FROM_LEGACY_LU_VEC( GetScreen()->GetCrossHairPosition() );
Pad->m_Pos = GetScreen()->GetCrossHairPosition();
// Set the relative pad position
// ( pad position for module orient, 0, and relative to the module position)
Pad->m_Pos0 = Pad->m_Pos - FROM_LEGACY_LU_VEC( Module->m_Pos );
wxPoint p = TO_LEGACY_LU_WXP( Pad->m_Pos0 );
RotatePoint( &p, -Module->m_Orient );
Pad->m_Pos0 = FROM_LEGACY_LU_VEC( p );
Pad->m_Pos0 = Pad->m_Pos - Module->m_Pos;
RotatePoint( &Pad->m_Pos0, -Module->m_Orient );
/* Automatically increment the current pad number. */
long num = 0;
......@@ -317,17 +316,17 @@ void PCB_BASE_FRAME::PlacePad( D_PAD* Pad, wxDC* DC )
// Set the old state
if( g_DragSegmentList[ii].m_Pad_Start )
Track->m_Start = TO_LEGACY_LU_WXP( Pad_OldPos );
Track->m_Start = Pad_OldPos;
if( g_DragSegmentList[ii].m_Pad_End )
Track->m_End = TO_LEGACY_LU_WXP( Pad_OldPos );
Track->m_End = Pad_OldPos;
picker.m_PickedItem = Track;
pickList.PushItem( picker );
}
/* Save old module and old items values */
wxPoint pad_curr_position = TO_LEGACY_LU_WXP( Pad->m_Pos );
wxPoint pad_curr_position = Pad->m_Pos;
Pad->m_Pos = Pad_OldPos;
......@@ -340,7 +339,7 @@ void PCB_BASE_FRAME::PlacePad( D_PAD* Pad, wxDC* DC )
SaveCopyInUndoList( pickList, UR_CHANGED );
}
Pad->m_Pos = FROM_LEGACY_LU_VEC( pad_curr_position );
Pad->m_Pos = pad_curr_position;
Pad->Draw( DrawPanel, DC, GR_XOR );
/* Redraw dragged track segments */
......@@ -350,10 +349,10 @@ void PCB_BASE_FRAME::PlacePad( D_PAD* Pad, wxDC* DC )
// Set the new state
if( g_DragSegmentList[ii].m_Pad_Start )
Track->m_Start = TO_LEGACY_LU_WXP( Pad->m_Pos );
Track->m_Start = Pad->m_Pos;
if( g_DragSegmentList[ii].m_Pad_End )
Track->m_End = TO_LEGACY_LU_WXP( Pad->m_Pos );
Track->m_End = Pad->m_Pos;
Track->SetState( IN_EDIT, OFF );
......@@ -362,12 +361,12 @@ void PCB_BASE_FRAME::PlacePad( D_PAD* Pad, wxDC* DC )
}
/* Compute local coordinates (i.e refer to Module position and for Module orient = 0) */
dX = TO_LEGACY_LU( Pad->m_Pos.x() - Pad_OldPos.x() );
dY = TO_LEGACY_LU( Pad->m_Pos.y() - Pad_OldPos.y() );
dX = Pad->m_Pos.x - Pad_OldPos.x;
dY = Pad->m_Pos.y - Pad_OldPos.y;
RotatePoint( &dX, &dY, -Module->m_Orient );
Pad->m_Pos0.x( Pad->m_Pos0.x() + FROM_LEGACY_LU( dX ) );
Pad->m_Pos0.y( Pad->m_Pos0.y() + FROM_LEGACY_LU( dY ) ); /// @BUG was it really s_CurrentSelectedPad ???
Pad->m_Pos0.x += dX;
s_CurrentSelectedPad->m_Pos0.y += dY;
Pad->m_Flags = 0;
......@@ -402,13 +401,13 @@ void PCB_BASE_FRAME::RotatePad( D_PAD* Pad, wxDC* DC )
if( DC )
Module->Draw( DrawPanel, DC, GR_XOR );
EXCHG( Pad->m_Size[0], Pad->m_Size[1] ); /// @TODO: make it using geom. transform
EXCHG( Pad->m_Drill[0], Pad->m_Drill[1] );
EXCHG( Pad->m_Offset[0], Pad->m_Offset[1] );
Pad->m_Offset.y( -Pad->m_Offset.y() );
EXCHG( Pad->m_Size.x, Pad->m_Size.y );
EXCHG( Pad->m_Drill.x, Pad->m_Drill.y );
EXCHG( Pad->m_Offset.x, Pad->m_Offset.y );
Pad->m_Offset.y = -Pad->m_Offset.y;
EXCHG( Pad->m_DeltaSize[0], Pad->m_DeltaSize[1] );
Pad->m_DeltaSize.x( -Pad->m_DeltaSize.x() );
EXCHG( Pad->m_DeltaSize.x, Pad->m_DeltaSize.y );
Pad->m_DeltaSize.x = -Pad->m_DeltaSize.x;
Module->CalculateBoundingBox();
Pad->DisplayInfo( this );
......
pcbnew/muonde.cpp
View file @ cc097762
This diff is collapsed.
pcbnew/onrightclick.cpp
View file @ cc097762
......@@ -839,8 +839,7 @@ static wxMenu* Append_Track_Width_List( BOARD* aBoard )
for( unsigned ii = 0; ii < aBoard->m_TrackWidthList.size(); ii++ )
{
value = ReturnStringFromValue( g_UserUnit,
TO_LEGACY_LU( aBoard->m_TrackWidthList[ii] ),
value = ReturnStringFromValue( g_UserUnit, aBoard->m_TrackWidthList[ii],
PCB_INTERNAL_UNIT, true );
msg.Printf( _( "Track %s" ), GetChars( value ) );
......@@ -854,14 +853,13 @@ static wxMenu* Append_Track_Width_List( BOARD* aBoard )
for( unsigned ii = 0; ii < aBoard->m_ViasDimensionsList.size(); ii++ )
{
value = ReturnStringFromValue( g_UserUnit,
TO_LEGACY_LU( aBoard->m_ViasDimensionsList[ii].m_Diameter ),
value = ReturnStringFromValue( g_UserUnit, aBoard->m_ViasDimensionsList[ii].m_Diameter,
PCB_INTERNAL_UNIT, true );
wxString drill = ReturnStringFromValue( g_UserUnit,
TO_LEGACY_LU( aBoard->m_ViasDimensionsList[ii].m_Drill ),
aBoard->m_ViasDimensionsList[ii].m_Drill,
PCB_INTERNAL_UNIT, true );
if( TO_LEGACY_LU( aBoard->m_ViasDimensionsList[ii].m_Drill ) <= 0 )
if( aBoard->m_ViasDimensionsList[ii].m_Drill <= 0 )
{
msg.Printf( _( "Via %s" ), GetChars( value ) );
}
......
pcbnew/pcbnew_config.cpp
View file @ cc097762
This diff is collapsed.
pcbnew/plot_rtn.cpp
View file @ cc097762
This diff is collapsed.
pcbnew/print_board_functions.cpp
View file @ cc097762
This diff is collapsed.
pcbnew/ratsnest.cpp
View file @ cc097762
This diff is collapsed.
pcbnew/solve.cpp
View file @ cc097762
This diff is collapsed.
pcbnew/specctra_export.cpp
View file @ cc097762
This diff is collapsed.
pcbnew/tool_pcb.cpp
View file @ cc097762
This diff is collapsed.
pcbnew/zones_convert_brd_items_to_polygons_with_Boost.cpp
View file @ cc097762
......@@ -201,7 +201,7 @@ void ZONE_CONTAINER::AddClearanceAreasPolygonsToPolysList( BOARD* aPcb )
* inside the board (in fact inside the hole. Some photo diodes and Leds are
* like this)
*/
if( (pad->m_Drill.x() == ZERO_LENGTH) && (pad->m_Drill.y() == ZERO_LENGTH) )
if( (pad->m_Drill.x == 0) && (pad->m_Drill.y == 0) )
continue;
// Use a dummy pad to calculate a hole shape that have the same dimension as
......
pcbnew/zones_polygons_test_connections.cpp
View file @ cc097762
This diff is collapsed.
polygon/math_for_graphics.h
View file @ cc097762
This diff is collapsed.
potrace/auxiliary.h
View file @ cc097762
This diff is collapsed.
potrace/render.cpp
View file @ cc097762
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment