Skip to content

K
kicad-source-mirror
Commit cbee2477 authored by Marco Mattila's avatar Marco Mattila
Browse files
Options

Add zone corner smoothing to pcbnew.

parent 75f332ae
Show whitespace changes
Inline Side-by-side
Showing with 4107 additions and 2623 deletions
pcbnew/class_zone.cpp
View file @ cbee2477
......@@ -18,6 +18,7 @@
#include "protos.h"
#include "richio.h"
#include "class_zone_setting.h"
/************************/
/* class ZONE_CONTAINER */
......@@ -30,6 +31,9 @@ ZONE_CONTAINER::ZONE_CONTAINER( BOARD* parent ) :
m_CornerSelection = -1;
m_IsFilled = false; // fill status : true when the zone is filled
m_FillMode = 0; // How to fill areas: 0 = use filled polygons, != 0 fill with segments
smoothedPoly = NULL;
cornerSmoothingType = ZONE_SETTING::SMOOTHING_NONE;
cornerRadius = 0;
utility = 0; // flags used in polygon calculations
utility2 = 0; // flags used in polygon calculations
m_Poly = new CPolyLine(); // Outlines
......@@ -170,6 +174,11 @@ bool ZONE_CONTAINER::Save( FILE* aFile ) const
if( ret < 3 )
return false;
ret = fprintf( aFile,
"ZSmoothing %d %d\n",
cornerSmoothingType, cornerRadius );
if( ret < 2 )
return false;
// Save the corner list
for( item_pos = 0; item_pos < corners_count; item_pos++ )
......@@ -320,6 +329,25 @@ int ZONE_CONTAINER::ReadDescr( LINE_READER* aReader )
}
/* Set hatch mode later, after reading outlines corners data */
}
else if( strnicmp( Line, "ZSmoothing", 10 ) == 0 )
{
int tempSmoothingType;
int tempCornerRadius;
text = Line + 10;
ret = sscanf( text, "%d %d", &tempSmoothingType, &tempCornerRadius );
if( ret < 2 )
return false;
if( tempSmoothingType >= ZONE_SETTING::SMOOTHING_LAST)
return false;
if( tempSmoothingType < 0 )
return false;
cornerSmoothingType = tempSmoothingType;
SetCornerRadius( tempCornerRadius );
}
else if( strnicmp( Line, "ZOptions", 8 ) == 0 ) // Options info found
{
int fillmode = 1;
......
pcbnew/class_zone.h
View file @ cbee2477
......@@ -9,6 +9,7 @@
#include "gr_basic.h"
#include "PolyLine.h"
#include "richio.h"
#include "class_zone_setting.h"
/* a small class used when filling areas with segments */
class SEGMENT
......@@ -61,7 +62,10 @@ public:
* ( m_FillMode == 1 )
* in this case segments have m_ZoneMinThickness width
*/
private:
CPolyLine* smoothedPoly; // Corner-smoothed version of m_Poly
int cornerSmoothingType;
unsigned int cornerRadius;
public:
ZONE_CONTAINER( BOARD* parent );
~ZONE_CONTAINER();
......@@ -366,6 +370,7 @@ public:
{
return m_Poly->GetHatchStyle();
}
/**
* Function IsSame
* test is 2 zones are equivalent:
......@@ -374,6 +379,35 @@ public:
* @param aZoneToCompare = zone to compare with "this"
*/
bool IsSame( const ZONE_CONTAINER &aZoneToCompare);
/**
* Function GetSmoothedPoly
* returns a pointer to the corner-smoothed version of
* m_Poly if it exists, otherwise it returns m_Poly.
* @return CPolyLine* - pointer to the polygon.
*/
CPolyLine* GetSmoothedPoly() const
{
if( smoothedPoly )
return smoothedPoly;
else
return m_Poly;
};
void SetCornerSmoothingType( int aType ) { cornerSmoothingType = aType; };
int GetCornerSmoothingType() const { return cornerSmoothingType; };
void SetCornerRadius( unsigned int aRadius )
{
if( aRadius > MAX_ZONE_CORNER_RADIUS )
cornerRadius = MAX_ZONE_CORNER_RADIUS;
else if( aRadius < 0 )
cornerRadius = 0;
else
cornerRadius = aRadius;
};
unsigned int GetCornerRadius() const { return cornerRadius; };
};
......
pcbnew/class_zone_setting.cpp
View file @ cbee2477
......@@ -37,6 +37,9 @@ ZONE_SETTING::ZONE_SETTING( void )
m_ThermalReliefCopperBridgeValue = 200; // tickness of the copper bridge in thermal reliefs
m_Zone_Pad_Options = THERMAL_PAD; // How pads are covered by copper in zone
cornerSmoothingType = SMOOTHING_NONE;
cornerRadius = 0;
}
......@@ -57,6 +60,8 @@ void ZONE_SETTING::ImportSetting( const ZONE_CONTAINER& aSource )
m_ThermalReliefGapValue = aSource.m_ThermalReliefGapValue;
m_ThermalReliefCopperBridgeValue = aSource.m_ThermalReliefCopperBridgeValue;
m_Zone_Pad_Options = aSource.m_PadOption;
cornerSmoothingType = aSource.GetCornerSmoothingType();
cornerRadius = aSource.GetCornerRadius();
}
......@@ -79,6 +84,8 @@ void ZONE_SETTING::ExportSetting( ZONE_CONTAINER& aTarget, bool aFullExport )
aTarget.m_ThermalReliefGapValue = m_ThermalReliefGapValue;
aTarget.m_ThermalReliefCopperBridgeValue = m_ThermalReliefCopperBridgeValue;
aTarget.m_PadOption = m_Zone_Pad_Options;
aTarget.SetCornerSmoothingType( cornerSmoothingType );
aTarget.SetCornerRadius( cornerRadius );
if( aFullExport )
{
aTarget.SetNet( m_NetcodeSelection );
......
pcbnew/class_zone_setting.h
View file @ cbee2477
......@@ -5,6 +5,7 @@
#ifndef ZONE_SETTING_H
#define ZONE_SETTING_H
#define MAX_ZONE_CORNER_RADIUS 4000
/*************************************************/
/* Class ZONE_SETTING to handle zones parameters */
......@@ -12,6 +13,12 @@
class ZONE_SETTING
{
public:
enum {
SMOOTHING_NONE,
SMOOTHING_CHAMFER,
SMOOTHING_FILLET,
SMOOTHING_LAST
};
int m_FillMode; // Mode for filling zone : 1 use segments, 0 use polygons
int m_ZoneClearance; // Clearance value
int m_ZoneMinThickness; // Min thickness value in filled areas
......@@ -23,6 +30,9 @@ public:
long m_ThermalReliefGapValue; // tickness of the gap in thermal reliefs
long m_ThermalReliefCopperBridgeValue; // tickness of the copper bridge in thermal reliefs
int m_Zone_Pad_Options; // How pads are covered by copper in zone
private:
int cornerSmoothingType; // Corner smoothing type
unsigned int cornerRadius; // Corner chamfer distance / fillet radius
public:
ZONE_SETTING( void );
......@@ -43,6 +53,19 @@ public:
* m_NetcodeSelection
*/
void ExportSetting( ZONE_CONTAINER& aTarget, bool aFullExport = true);
void SetCornerSmoothingType( int aType) { cornerSmoothingType = aType; };
int GetCornerSmoothingType() const { return cornerSmoothingType; };
void SetCornerRadius( int aRadius )
{
if( aRadius > MAX_ZONE_CORNER_RADIUS )
cornerRadius = MAX_ZONE_CORNER_RADIUS;
else if( aRadius < 0 )
cornerRadius = 0;
else
cornerRadius = aRadius;
};
unsigned int GetCornerRadius() const { return cornerRadius; };
};
......
pcbnew/dialogs/dialog_copper_zones.cpp
View file @ cbee2477
......@@ -19,6 +19,7 @@
#include "zones.h"
#include "dialog_copper_zones.h"
#include "class_zone_setting.h"
#define LAYER_BITMAP_SIZE_X 20
#define LAYER_BITMAP_SIZE_Y 10
......@@ -124,6 +125,13 @@ void dialog_copper_zone::initDialog()
m_Zone_Setting->m_ThermalReliefCopperBridgeValue,
PCB_INTERNAL_UNIT );
m_cornerSmoothingChoice->SetSelection( m_Zone_Setting->GetCornerSmoothingType() );
AddUnitSymbol( *m_cornerSmoothingTitle, g_UserUnit );
PutValueInLocalUnits( *m_cornerSmoothingCtrl,
m_Zone_Setting->GetCornerRadius(),
PCB_INTERNAL_UNIT );
switch( m_Zone_Setting->m_Zone_HatchingStyle )
{
case CPolyLine::NO_HATCH:
......@@ -186,6 +194,9 @@ void dialog_copper_zone::initDialog()
// Build list of nets:
m_DoNotShowNetNameFilter->SetValue( netNameDoNotShowFilter );
buildAvailableListOfNets();
wxCommandEvent event;
OnCornerSmoothingModeChoice( event );
}
......@@ -203,6 +214,35 @@ void dialog_copper_zone::OnClose( wxCloseEvent& event )
}
void dialog_copper_zone::OnCornerSmoothingModeChoice( wxCommandEvent& event )
{
int selection = m_cornerSmoothingChoice->GetSelection();
switch( selection )
{
case ZONE_SETTING::SMOOTHING_NONE:
m_cornerSmoothingTitle->Enable( false );
m_cornerSmoothingCtrl->Enable( false );
break;
case ZONE_SETTING::SMOOTHING_CHAMFER:
m_cornerSmoothingTitle->Enable( true );
m_cornerSmoothingCtrl->Enable( true );
m_cornerSmoothingTitle->SetLabel( wxT( "Chamfer distance" ) );
AddUnitSymbol( *m_cornerSmoothingTitle, g_UserUnit );
break;
case ZONE_SETTING::SMOOTHING_FILLET:
m_cornerSmoothingTitle->Enable( true );
m_cornerSmoothingCtrl->Enable( true );
m_cornerSmoothingTitle->SetLabel( wxT( "Fillet radius" ) );
AddUnitSymbol( *m_cornerSmoothingTitle, g_UserUnit );
break;
}
Layout();
m_MainBoxSizer->SetSizeHints( this );
}
/********************************************************************************************/
bool dialog_copper_zone::AcceptOptions( bool aPromptForErrors, bool aUseExportableSetupOnly )
/********************************************************************************************/
......@@ -282,6 +322,10 @@ bool dialog_copper_zone::AcceptOptions( bool aPromptForErrors, bool aUseExportab
return false;
}
m_Zone_Setting->SetCornerSmoothingType( m_cornerSmoothingChoice->GetSelection() );
txtvalue = m_cornerSmoothingCtrl->GetValue();
m_Zone_Setting->SetCornerRadius( ReturnValueFromString( g_UserUnit, txtvalue, m_Parent->m_InternalUnits ) );
if( m_OrientEdgesOpt->GetSelection() == 0 )
g_Zone_45_Only = FALSE;
else
......@@ -493,6 +537,7 @@ void dialog_copper_zone::buildAvailableListOfNets()
m_ListNetNameSelection->Clear();
listNetName.Insert( wxT( "<no net>" ), 0 );
m_ListNetNameSelection->InsertItems( listNetName, 0 );
m_ListNetNameSelection->SetSelection( 0 );
// Ensure current select net for the zone is visible:
int net_select = m_Zone_Setting->m_NetcodeSelection;
......
pcbnew/dialogs/dialog_copper_zones.h
View file @ cbee2477
......@@ -38,6 +38,7 @@ private:
void OnButtonOkClick( wxCommandEvent& event );
void OnButtonCancelClick( wxCommandEvent& event );
void OnClose( wxCloseEvent& event );
void OnCornerSmoothingModeChoice( wxCommandEvent& event );
bool AcceptOptions( bool aPromptForErrors, bool aUseExportableSetupOnly = false );
void OnNetSortingOptionSelected( wxCommandEvent& event );
void ExportSetupToOtherCopperZones( wxCommandEvent& event );
......
pcbnew/dialogs/dialog_copper_zones_base.cpp
View file @ cbee2477
///////////////////////////////////////////////////////////////////////////
// C++ code generated with wxFormBuilder (version Sep 8 2010)
// C++ code generated with wxFormBuilder (version Nov 18 2010)
// http://www.wxformbuilder.org/
//
// PLEASE DO "NOT" EDIT THIS FILE!
......@@ -15,6 +15,7 @@ BEGIN_EVENT_TABLE( dialog_copper_zone_base, wxDialog )
EVT_TEXT_ENTER( ID_TEXTCTRL_NETNAMES_FILTER, dialog_copper_zone_base::_wxFB_OnRunFiltersButtonClick )
EVT_TEXT_ENTER( ID_TEXTCTRL_NETNAMES_FILTER, dialog_copper_zone_base::_wxFB_OnRunFiltersButtonClick )
EVT_BUTTON( wxID_APPLY_FILTERS, dialog_copper_zone_base::_wxFB_OnRunFiltersButtonClick )
EVT_CHOICE( wxID_ANY, dialog_copper_zone_base::_wxFB_OnCornerSmoothingModeChoice )
EVT_CHOICE( ID_M_PADINZONEOPT, dialog_copper_zone_base::_wxFB_OnPadsInZoneClick )
EVT_BUTTON( wxID_BUTTON_EXPORT, dialog_copper_zone_base::_wxFB_ExportSetupToOtherCopperZones )
EVT_BUTTON( wxID_OK, dialog_copper_zone_base::_wxFB_OnButtonOkClick )
......@@ -25,8 +26,7 @@ dialog_copper_zone_base::dialog_copper_zone_base( wxWindow* parent, wxWindowID i
{
this->SetSizeHints( wxDefaultSize, wxDefaultSize );
wxBoxSizer* m_MainBoxSize;
m_MainBoxSize = new wxBoxSizer( wxVERTICAL );
m_MainBoxSizer = new wxBoxSizer( wxVERTICAL );
wxBoxSizer* m_OptionsBoxSizer;
m_OptionsBoxSizer = new wxBoxSizer( wxHORIZONTAL );
......@@ -87,7 +87,7 @@ dialog_copper_zone_base::dialog_copper_zone_base( wxWindow* parent, wxWindowID i
m_OptionsBoxSizer->Add( m_NetSortOptSizer, 0, wxALL, 5 );
m_MainBoxSize->Add( m_OptionsBoxSizer, 1, wxALL|wxEXPAND, 5 );
m_MainBoxSizer->Add( m_OptionsBoxSizer, 1, wxALL|wxEXPAND, 5 );
wxStaticBoxSizer* m_ExportableSetupSizer;
m_ExportableSetupSizer = new wxStaticBoxSizer( new wxStaticBox( this, wxID_ANY, _("Settings") ), wxHORIZONTAL );
......@@ -113,28 +113,20 @@ dialog_copper_zone_base::dialog_copper_zone_base( wxWindow* parent, wxWindowID i
m_staticText151 = new wxStaticText( this, wxID_ANY, _("Corner smoothing:"), wxDefaultPosition, wxDefaultSize, 0 );
m_staticText151->Wrap( -1 );
m_staticText151->Enable( false );
bSizer9->Add( m_staticText151, 0, wxLEFT|wxRIGHT|wxTOP, 5 );
wxString m_choice7Choices[] = { _("None") };
int m_choice7NChoices = sizeof( m_choice7Choices ) / sizeof( wxString );
m_choice7 = new wxChoice( this, wxID_ANY, wxDefaultPosition, wxDefaultSize, m_choice7NChoices, m_choice7Choices, 0 );
m_choice7->SetSelection( 0 );
m_choice7->Enable( false );
bSizer9->Add( m_choice7, 0, wxBOTTOM|wxEXPAND|wxLEFT|wxRIGHT, 5 );
m_staticText161 = new wxStaticText( this, wxID_ANY, _("Chamfer distance (mm):"), wxDefaultPosition, wxDefaultSize, 0 );
m_staticText161->Wrap( -1 );
m_staticText161->Enable( false );
bSizer9->Add( m_staticText161, 0, wxLEFT|wxRIGHT|wxTOP, 5 );
wxString m_cornerSmoothingChoiceChoices[] = { _("None"), _("Chamfer"), _("Fillet") };
int m_cornerSmoothingChoiceNChoices = sizeof( m_cornerSmoothingChoiceChoices ) / sizeof( wxString );
m_cornerSmoothingChoice = new wxChoice( this, wxID_ANY, wxDefaultPosition, wxDefaultSize, m_cornerSmoothingChoiceNChoices, m_cornerSmoothingChoiceChoices, 0 );
m_cornerSmoothingChoice->SetSelection( 0 );
bSizer9->Add( m_cornerSmoothingChoice, 0, wxBOTTOM|wxEXPAND|wxLEFT|wxRIGHT, 5 );
m_textCtrl7 = new wxTextCtrl( this, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
m_textCtrl7->Enable( false );
m_cornerSmoothingTitle = new wxStaticText( this, wxID_ANY, _("Chamfer distance (mm):"), wxDefaultPosition, wxDefaultSize, 0 );
m_cornerSmoothingTitle->Wrap( -1 );
bSizer9->Add( m_cornerSmoothingTitle, 0, wxLEFT|wxRIGHT|wxTOP, 5 );
bSizer9->Add( m_textCtrl7, 0, wxBOTTOM|wxEXPAND|wxLEFT|wxRIGHT, 5 );
m_cornerSmoothingCtrl = new wxTextCtrl( this, ID_M_CORNERSMOOTHINGCTRL, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
bSizer9->Add( m_cornerSmoothingCtrl, 0, wxBOTTOM|wxEXPAND|wxLEFT|wxRIGHT, 5 );
m_ExportableSetupSizer->Add( bSizer9, 0, wxEXPAND, 5 );
......@@ -226,7 +218,7 @@ dialog_copper_zone_base::dialog_copper_zone_base( wxWindow* parent, wxWindowID i
m_ExportableSetupSizer->Add( bSizer81, 0, wxEXPAND, 5 );
m_MainBoxSize->Add( m_ExportableSetupSizer, 1, wxALL|wxEXPAND, 5 );
m_MainBoxSizer->Add( m_ExportableSetupSizer, 1, wxALL|wxEXPAND, 5 );
wxBoxSizer* bSizer10;
bSizer10 = new wxBoxSizer( wxHORIZONTAL );
......@@ -243,9 +235,9 @@ dialog_copper_zone_base::dialog_copper_zone_base( wxWindow* parent, wxWindowID i
m_ButtonCancel = new wxButton( this, wxID_CANCEL, _("Cancel"), wxDefaultPosition, wxDefaultSize, 0 );
bSizer10->Add( m_ButtonCancel, 0, wxALL|wxEXPAND, 5 );
m_MainBoxSize->Add( bSizer10, 0, wxALIGN_RIGHT|wxALL, 5 );
m_MainBoxSizer->Add( bSizer10, 0, wxALIGN_RIGHT|wxALL, 5 );
this->SetSizer( m_MainBoxSize );
this->SetSizer( m_MainBoxSizer );
this->Layout();
}
......
pcbnew/dialogs/dialog_copper_zones_base.fbp
View file @ cbee2477
This source diff could not be displayed because it is too large. You can view the blob instead.
pcbnew/dialogs/dialog_copper_zones_base.h
View file @ cbee2477
///////////////////////////////////////////////////////////////////////////
// C++ code generated with wxFormBuilder (version Sep 8 2010)
// C++ code generated with wxFormBuilder (version Nov 18 2010)
// http://www.wxformbuilder.org/
//
// PLEASE DO "NOT" EDIT THIS FILE!
......@@ -38,6 +38,7 @@ class dialog_copper_zone_base : public wxDialog
void _wxFB_OnClose( wxCloseEvent& event ){ OnClose( event ); }
void _wxFB_OnNetSortingOptionSelected( wxCommandEvent& event ){ OnNetSortingOptionSelected( event ); }
void _wxFB_OnRunFiltersButtonClick( wxCommandEvent& event ){ OnRunFiltersButtonClick( event ); }
void _wxFB_OnCornerSmoothingModeChoice( wxCommandEvent& event ){ OnCornerSmoothingModeChoice( event ); }
void _wxFB_OnPadsInZoneClick( wxCommandEvent& event ){ OnPadsInZoneClick( event ); }
void _wxFB_ExportSetupToOtherCopperZones( wxCommandEvent& event ){ ExportSetupToOtherCopperZones( event ); }
void _wxFB_OnButtonOkClick( wxCommandEvent& event ){ OnButtonOkClick( event ); }
......@@ -51,6 +52,7 @@ class dialog_copper_zone_base : public wxDialog
ID_M_NETDISPLAYOPTION,
ID_TEXTCTRL_NETNAMES_FILTER,
wxID_APPLY_FILTERS,
ID_M_CORNERSMOOTHINGCTRL,
ID_M_PADINZONEOPT,
wxID_ANTIPAD_SIZE,
wxID_COPPER_BRIDGE_VALUE,
......@@ -61,6 +63,7 @@ class dialog_copper_zone_base : public wxDialog
wxID_BUTTON_EXPORT,
};
wxBoxSizer* m_MainBoxSizer;
wxBoxSizer* m_layerSizer;
wxStaticText* m_staticText17;
wxStaticText* m_staticText2;
......@@ -77,9 +80,9 @@ class dialog_copper_zone_base : public wxDialog
wxStaticText* m_MinThicknessValueTitle;
wxTextCtrl* m_ZoneMinThicknessCtrl;
wxStaticText* m_staticText151;
wxChoice* m_choice7;
wxStaticText* m_staticText161;
wxTextCtrl* m_textCtrl7;
wxChoice* m_cornerSmoothingChoice;
wxStaticText* m_cornerSmoothingTitle;
wxTextCtrl* m_cornerSmoothingCtrl;
wxStaticText* m_staticText13;
wxChoice* m_PadInZoneOpt;
wxStaticText* m_AntipadSizeText;
......@@ -102,6 +105,7 @@ class dialog_copper_zone_base : public wxDialog
virtual void OnClose( wxCloseEvent& event ) { event.Skip(); }
virtual void OnNetSortingOptionSelected( wxCommandEvent& event ) { event.Skip(); }
virtual void OnRunFiltersButtonClick( wxCommandEvent& event ) { event.Skip(); }
virtual void OnCornerSmoothingModeChoice( wxCommandEvent& event ) { event.Skip(); }
virtual void OnPadsInZoneClick( wxCommandEvent& event ) { event.Skip(); }
virtual void ExportSetupToOtherCopperZones( wxCommandEvent& event ) { event.Skip(); }
virtual void OnButtonOkClick( wxCommandEvent& event ) { event.Skip(); }
......
pcbnew/zone_filling_algorithm.cpp
View file @ cbee2477
......@@ -43,15 +43,35 @@ int ZONE_CONTAINER::BuildFilledPolysListData( BOARD* aPcb )
if( GetNumCorners() <= 2 ) // malformed zone. Kbool does not like it ...
return 0;
m_Poly->MakeKboolPoly( -1, -1, NULL, true );
// Make a smoothed polygon out of the user-drawn polygon if required
if( smoothedPoly ) {
delete smoothedPoly;
smoothedPoly = NULL;
}
switch( cornerSmoothingType )
{
case ZONE_SETTING::SMOOTHING_CHAMFER:
smoothedPoly = m_Poly->Chamfer( cornerRadius );
break;
case ZONE_SETTING::SMOOTHING_FILLET:
smoothedPoly = m_Poly->Fillet( cornerRadius, m_ArcToSegmentsCount );
break;
default:
smoothedPoly = new CPolyLine;
smoothedPoly->Copy( m_Poly );
break;
}
smoothedPoly->MakeKboolPoly( -1, -1, NULL, true );
int count = 0;
while( m_Poly->GetKboolEngine()->StartPolygonGet() )
while( smoothedPoly->GetKboolEngine()->StartPolygonGet() )
{
CPolyPt corner( 0, 0, false );
while( m_Poly->GetKboolEngine()->PolygonHasMorePoints() )
while( smoothedPoly->GetKboolEngine()->PolygonHasMorePoints() )
{
corner.x = (int) m_Poly->GetKboolEngine()->GetPolygonXPoint();
corner.y = (int) m_Poly->GetKboolEngine()->GetPolygonYPoint();
corner.x = (int) smoothedPoly->GetKboolEngine()->GetPolygonXPoint();
corner.y = (int) smoothedPoly->GetKboolEngine()->GetPolygonYPoint();
corner.end_contour = false;
m_FilledPolysList.push_back( corner );
count++;
......@@ -60,10 +80,10 @@ int ZONE_CONTAINER::BuildFilledPolysListData( BOARD* aPcb )
corner.end_contour = true;
m_FilledPolysList.pop_back();
m_FilledPolysList.push_back( corner );
m_Poly->GetKboolEngine()->EndPolygonGet();
smoothedPoly->GetKboolEngine()->EndPolygonGet();
}
m_Poly->FreeKboolEngine();
smoothedPoly->FreeKboolEngine();
/* For copper layers, we now must add holes in the Polygon list.
* holes are pads and tracks with their clearance area
......
pcbnew/zones_test_and_combine_areas.cpp
View file @ cbee2477
......@@ -854,6 +854,8 @@ int BOARD::Test_Drc_Areas_Outlines_To_Areas_Outlines( ZONE_CONTAINER* aArea_To_E
for( int ia = 0; ia < GetAreaCount(); ia++ )
{
ZONE_CONTAINER* Area_Ref = GetArea( ia );
CPolyLine* refSmoothedPoly = Area_Ref->GetSmoothedPoly();
if( !Area_Ref->IsOnCopperLayer() )
continue;
......@@ -863,6 +865,7 @@ int BOARD::Test_Drc_Areas_Outlines_To_Areas_Outlines( ZONE_CONTAINER* aArea_To_E
for( int ia2 = 0; ia2 < GetAreaCount(); ia2++ )
{
ZONE_CONTAINER* Area_To_Test = GetArea( ia2 );
CPolyLine* testSmoothedPoly = Area_To_Test->GetSmoothedPoly();
if( Area_Ref == Area_To_Test )
continue;
......@@ -884,11 +887,11 @@ int BOARD::Test_Drc_Areas_Outlines_To_Areas_Outlines( ZONE_CONTAINER* aArea_To_E
zone2zoneClearance = MAX( zone2zoneClearance, Area_To_Test->m_ZoneClearance );
// test for some corners of Area_Ref inside Area_To_Test
for( int ic = 0; ic < Area_Ref->m_Poly->GetNumCorners(); ic++ )
for( int ic = 0; ic < refSmoothedPoly->GetNumCorners(); ic++ )
{
int x = Area_Ref->m_Poly->GetX( ic );
int y = Area_Ref->m_Poly->GetY( ic );
if( Area_To_Test->m_Poly->TestPointInside( x, y ) )
int x = refSmoothedPoly->GetX( ic );
int y = refSmoothedPoly->GetY( ic );
if( testSmoothedPoly->TestPointInside( x, y ) )
{
// COPPERAREA_COPPERAREA error: copper area ref corner inside copper area
if( aCreate_Markers )
......@@ -905,11 +908,11 @@ int BOARD::Test_Drc_Areas_Outlines_To_Areas_Outlines( ZONE_CONTAINER* aArea_To_E
}
// test for some corners of Area_To_Test inside Area_Ref
for( int ic2 = 0; ic2 < Area_To_Test->m_Poly->GetNumCorners(); ic2++ )
for( int ic2 = 0; ic2 < testSmoothedPoly->GetNumCorners(); ic2++ )
{
int x = Area_To_Test->m_Poly->GetX( ic2 );
int y = Area_To_Test->m_Poly->GetY( ic2 );
if( Area_Ref->m_Poly->TestPointInside( x, y ) )
int x = testSmoothedPoly->GetX( ic2 );
int y = testSmoothedPoly->GetY( ic2 );
if( refSmoothedPoly->TestPointInside( x, y ) )
{
// COPPERAREA_COPPERAREA error: copper area corner inside copper area ref
if( aCreate_Markers )
......@@ -926,46 +929,46 @@ int BOARD::Test_Drc_Areas_Outlines_To_Areas_Outlines( ZONE_CONTAINER* aArea_To_E
}
// now test spacing between areas
for( int icont = 0; icont < Area_Ref->m_Poly->GetNumContours(); icont++ )
for( int icont = 0; icont < refSmoothedPoly->GetNumContours(); icont++ )
{
int ic_start = Area_Ref->m_Poly->GetContourStart( icont );
int ic_end = Area_Ref->m_Poly->GetContourEnd( icont );
int ic_start = refSmoothedPoly->GetContourStart( icont );
int ic_end = refSmoothedPoly->GetContourEnd( icont );
for( int ic = ic_start; ic<=ic_end; ic++ )
{
int ax1 = Area_Ref->m_Poly->GetX( ic );
int ay1 = Area_Ref->m_Poly->GetY( ic );
int ax1 = refSmoothedPoly->GetX( ic );
int ay1 = refSmoothedPoly->GetY( ic );
int ax2, ay2;
if( ic == ic_end )
{
ax2 = Area_Ref->m_Poly->GetX( ic_start );
ay2 = Area_Ref->m_Poly->GetY( ic_start );
ax2 = refSmoothedPoly->GetX( ic_start );
ay2 = refSmoothedPoly->GetY( ic_start );
}
else
{
ax2 = Area_Ref->m_Poly->GetX( ic + 1 );
ay2 = Area_Ref->m_Poly->GetY( ic + 1 );
ax2 = refSmoothedPoly->GetX( ic + 1 );
ay2 = refSmoothedPoly->GetY( ic + 1 );
}
int astyle = Area_Ref->m_Poly->GetSideStyle( ic );
for( int icont2 = 0; icont2 < Area_To_Test->m_Poly->GetNumContours(); icont2++ )
int astyle = refSmoothedPoly->GetSideStyle( ic );
for( int icont2 = 0; icont2 < testSmoothedPoly->GetNumContours(); icont2++ )
{
int ic_start2 = Area_To_Test->m_Poly->GetContourStart( icont2 );
int ic_end2 = Area_To_Test->m_Poly->GetContourEnd( icont2 );
int ic_start2 = testSmoothedPoly->GetContourStart( icont2 );
int ic_end2 = testSmoothedPoly->GetContourEnd( icont2 );
for( int ic2 = ic_start2; ic2<=ic_end2; ic2++ )
{
int bx1 = Area_To_Test->m_Poly->GetX( ic2 );
int by1 = Area_To_Test->m_Poly->GetY( ic2 );
int bx1 = testSmoothedPoly->GetX( ic2 );
int by1 = testSmoothedPoly->GetY( ic2 );
int bx2, by2;
if( ic2 == ic_end2 )
{
bx2 = Area_To_Test->m_Poly->GetX( ic_start2 );
by2 = Area_To_Test->m_Poly->GetY( ic_start2 );
bx2 = testSmoothedPoly->GetX( ic_start2 );
by2 = testSmoothedPoly->GetY( ic_start2 );
}
else
{
bx2 = Area_To_Test->m_Poly->GetX( ic2 + 1 );
by2 = Area_To_Test->m_Poly->GetY( ic2 + 1 );
bx2 = testSmoothedPoly->GetX( ic2 + 1 );
by2 = testSmoothedPoly->GetY( ic2 + 1 );
}
int bstyle = Area_To_Test->m_Poly->GetSideStyle( ic2 );
int bstyle = testSmoothedPoly->GetSideStyle( ic2 );
int x, y;
int d = GetClearanceBetweenSegments(
......
polygon/PolyLine.cpp
View file @ cbee2477
......@@ -907,6 +907,215 @@ void CPolyLine::RemoveContour( int icont )
}
int CPolyLine::Chamfer( unsigned int aIndex, unsigned int aDistance )
{
int x1, y1;
long xa, ya, xb, yb, nx, ny;
if( !aDistance )
return 0;
x1 = corner[aIndex].x;
y1 = corner[aIndex].y;
if( aIndex == 0 )
{
xa = corner[corner.size()-1].x - x1;
ya = corner[corner.size()-1].y - y1;
}
else
{
xa = corner[aIndex-1].x - x1;
ya = corner[aIndex-1].y - y1;
}
if( aIndex == corner.size()-1 )
{
xb = corner[0].x - x1;
yb = corner[0].y - y1;
}
else
{
xb = corner[aIndex+1].x - x1;
yb = corner[aIndex+1].y - y1;
}
// Move the first vertex into new position
nx = (long)aDistance*xa/sqrt( xa*xa + ya*ya );
ny = (long)aDistance*ya/sqrt( xa*xa + ya*ya );
corner[aIndex].x = x1 + nx;
corner[aIndex].y = y1 + ny;
// Add one new vertex
nx = (long)aDistance*xb/sqrt( xb*xb + yb*yb );
ny = (long)aDistance*yb/sqrt( xb*xb + yb*yb );
InsertCorner( aIndex, x1 + nx, y1 + ny );
return 1; // Added one vertex
}
CPolyLine* CPolyLine::Chamfer( unsigned int aDistance )
{
CPolyLine* newPoly = new CPolyLine;
unsigned int lena, lenb;
newPoly->Copy( this );
for( unsigned int i = 0, index = 0; i < corner.size(); i++, index++ )
{
if( i == 0 )
lena = GetEdgeLength( corner.size()-1 );
else
lena = GetEdgeLength( i - 1 );
lenb = GetEdgeLength( i );
unsigned int distance = aDistance;
// Chamfer one half of an edge at most
if( 0.5*lena < distance )
distance = 0.5*lena;
if( 0.5*lenb < distance )
distance = 0.5*lenb;
// Chamfer this corner and keep tract of added vertices
index += newPoly->Chamfer( index, distance );
}
return newPoly;
}
int CPolyLine::Fillet( unsigned int aIndex, unsigned int aRadius,
unsigned int aSegments )
{
int x1, y1; // Current vertex
int xa, ya; // Previous vertex
int xb, yb; // Next vertex
double nx, ny;
if( !aRadius )
return 0;
x1 = corner[aIndex].x;
y1 = corner[aIndex].y;
if( aIndex == 0 )
{
xa = corner[corner.size()-1].x - x1;
ya = corner[corner.size()-1].y - y1;
}
else
{
xa = corner[aIndex-1].x - x1;
ya = corner[aIndex-1].y - y1;
}
if( aIndex == corner.size()-1 )
{
xb = corner[0].x - x1;
yb = corner[0].y - y1;
}
else
{
xb = corner[aIndex+1].x - x1;
yb = corner[aIndex+1].y - y1;
}
double lena = sqrt( xa*xa + ya*ya );
double lenb = sqrt( xb*xb + yb*yb );
double cosine = ( xa*xb + ya*yb )/( lena*lenb );
// Calculate fillet arc absolute center point (xc, yx)
double k = aRadius / sqrt( .5*( 1-cosine ) );
double lenab = sqrt( ( xa/lena + xb/lenb )*( xa/lena + xb/lenb ) +
( ya/lena + yb/lenb )*( ya/lena + yb/lenb ) );
double xc = x1 + k*( xa/lena + xb/lenb )/lenab;
double yc = y1 + k*( ya/lena + yb/lenb )/lenab;
// Calculate arc start and end vectors
k = aRadius / sqrt( 2/( 1+cosine )-1 );
double xs = x1 + k*xa/lena - xc;
double ys = y1 + k*ya/lena - yc;
double xe = x1 + k*xb/lenb - xc;
double ye = y1 + k*yb/lenb - yc;
// Cosine of arc angle
double argument = ( xs*xe + ys*ye ) / ( aRadius*aRadius );
if( argument < -1 ) // Just in case...
argument = -1;
else if( argument > 1 )
argument = 1;
double arcAngle = acos( argument );
// Calculate the number of segments
double tempSegments = (double)aSegments * ( arcAngle / ( 2*M_PI ) );
if( tempSegments - (int)tempSegments > 0 )
tempSegments++;
aSegments = tempSegments;
double deltaAngle = arcAngle / aSegments;
double startAngle = atan2( -ys, xs );
// Flip arc for inner corners
if( xa*yb - ya*xb <= 0 )
deltaAngle *= -1;
// Move first vertex into new position
nx = xc + xs + 0.5;
ny = yc + ys + 0.5;
corner[aIndex].x = (int)nx;
corner[aIndex].y = (int)ny;
// Add new vertices
unsigned int nVertices = 0;
for( unsigned int j = 0; j < aSegments; j++ )
{
nx = xc + cos( startAngle + (j+1)*deltaAngle )*aRadius + 0.5;
ny = yc - sin( startAngle + (j+1)*deltaAngle )*aRadius + 0.5;
InsertCorner( aIndex + nVertices, (int)nx, (int)ny );
nVertices++;
}
return nVertices; // Return the number of added vertices
}
CPolyLine* CPolyLine::Fillet( unsigned int aRadius, unsigned int aSegments )
{
CPolyLine* newPoly = new CPolyLine;
unsigned int lena, lenb;
newPoly->Copy( this );
for( unsigned int i = 0, index = 0; i < corner.size(); i++, index++ )
{
if( i == 0 )
lena = GetEdgeLength( corner.size()-1 );
else
lena = GetEdgeLength( i - 1 );
lenb = GetEdgeLength( i );
unsigned int radius = aRadius;
double denom = sqrt( 2.0/( 1+GetCosine( i ) )-1 );
// Limit rounding distance to one half of an edge
if( 0.5*lena*denom < radius )
radius = 0.5*lena*denom;
if( 0.5*lenb*denom < radius )
radius = 0.5*lenb*denom;
// Round this corner and keep tract of added vertices
index += newPoly->Fillet( index, radius, aSegments );
}
return newPoly;
}
/******************************************/
void CPolyLine::RemoveAllContours( void )
/******************************************/
......@@ -996,6 +1205,63 @@ int CPolyLine::GetEndContour( int ic )
}
unsigned int CPolyLine::GetEdgeLength( unsigned int aIndex )
{
long xa, ya, xb, yb;
xa = corner[aIndex].x;
ya = corner[aIndex].y;
if( aIndex == corner.size()-1 )
{
xb = corner[0].x;
yb = corner[0].y;
}
else
{
xb = corner[aIndex+1].x;
yb = corner[aIndex+1].y;
}
return sqrt( (xb-xa)*(xb-xa) + (yb-ya)*(yb-ya) );
}
double CPolyLine::GetCosine( unsigned int aIndex )
{
int x1, y1;
long xa, ya, xb, yb;
x1 = corner[aIndex].x;
y1 = corner[aIndex].y;
if( aIndex == 0 )
{
xa = corner[corner.size()-1].x - x1;
ya = corner[corner.size()-1].y - y1;
}
else
{
xa = corner[aIndex-1].x - x1;
ya = corner[aIndex-1].y - y1;
}
if( aIndex == corner.size() - 1 )
{
xb = corner[0].x - x1;
yb = corner[0].y - y1;
}
else
{
xb = corner[aIndex+1].x - x1;
yb = corner[aIndex+1].y - y1;
}
double lena = sqrt( (double)xa*xa + ya*ya );
double lenb = sqrt( (double)xb*xb + yb*yb );
return ( xa*xb + ya*yb )/( lena*lenb );
}
CRect CPolyLine::GetBounds()
{
CRect r = GetCornerBounds();
......
polygon/PolyLine.h
View file @ cbee2477
......@@ -132,6 +132,43 @@ public:
void Close( int style = STRAIGHT, bool bDraw = false );
void RemoveContour( int icont );
/**
* Function Chamfer
* chamfers a corner.
* @param aIndex is the corner index.
* @param aDistance is the chamfering distance.
* @return int - The number of segments added.
*/
int Chamfer( unsigned int aIndex, unsigned int aDistance );
/**
* Function Chamfer
* returns a chamfered version of a polygon.
* @param aDistance is the chamfering distance.
* @return CPolyLine* - Pointer to new polygon.
*/
CPolyLine* Chamfer( unsigned int aDistance );
/**
* Function Fillet
* rounds a corner.
* @param aIndex is the corner index.
* @param aDistance is the fillet radius.
* @param aSegments is the number of segments / 360 degrees.
* @return int - The number of segments added.
*/
int Fillet( unsigned int aIndex, unsigned int aRadius,
unsigned int aSegments );
/**
* Function Fillet
* returns a filleted version of a polygon.
* @param aDistance is the fillet radius.
* @param aSegments is the number of segments / fillet.
* @return CPolyLine* - Pointer to new polygon.
*/
CPolyLine* Fillet( unsigned int aRadius, unsigned int aSegments );
void RemoveAllContours( void );
// drawing functions
......@@ -149,7 +186,6 @@ public:
bool IsCutoutContour( int icont );
void AppendArc( int xi, int yi, int xf, int yf, int xc, int yc, int num );
// access functions
int GetLayer() { return m_layer; }
int GetNumCorners();
......@@ -164,6 +200,22 @@ public:
int GetY( int ic );
int GetEndContour( int ic );
/**
* Function GetEdgeLength
* returns the length of the edge starting at given corner index.
* @param aIndex is the corner index.
* @return unsigned int - the length of the edge.
*/
unsigned int GetEdgeLength( unsigned int aIndex );
/**
* Function GetCosine
* returns the cosine between the two edge vectors at a corner.
* @param aIndex is the corner index.
* @return double - the cosine value.
*/
double GetCosine( unsigned int aIndex );
int GetUtility( int ic ) { return corner[ic].utility; };
void SetUtility( int ic, int utility ) { corner[ic].utility = utility; };
int GetSideStyle( int is );
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment