Add PCBNew setting to remember last net list read and other minor fixes.

* PCBNew remembers last net list read during the current editing session
  as well as between project editing sessions.  Closes bug 576902.
* Separate PCBNew application settings from project file settings and
  allocate them dynamically instead of statically to make it easier to
  eliminate global variables.

TODO.txt

@@ -78,8 +78,9 @@ GerbView
 * Add excellon2 drill file support (small good library)
 * Fix the polygon bug.
 * Switch to use ZONE instead of SEGZONE for polygons.
-
-
+* Separate application settings and project configuration settings by converting
+  static list of parameters in gerbview_config.h to dynamically created lists of
+  settings.  See eeschema/eeschema_config.cpp for an example.
 
 
 

include/wxPcbStruct.h

@@ -8,6 +8,7 @@
 
 #include "wxstruct.h"
 #include "base_struct.h"
+#include "param_config.h"
 
 #ifndef PCB_INTERNAL_UNIT
 #define PCB_INTERNAL_UNIT 10000
@@ -39,8 +40,7 @@ class PCB_LAYER_WIDGET;
 
 
 /**
- * @info see also class WinEDA_BasePcbFrame: Basic class for pcbnew and
- *gerbview
+ * @info see also class WinEDA_BasePcbFrame: Basic class for pcbnew and gerbview.
  */
 
 
@@ -57,6 +57,11 @@ protected:
 
     DRC* m_drc;                     ///< the DRC controller, see drc.cpp
 
+    PARAM_CFG_ARRAY   m_projectFileParams;   ///< List of PCBNew project file settings.
+    PARAM_CFG_ARRAY   m_configSettings;      ///< List of PCBNew configuration settings.
+
+    wxString          m_lastNetListRead;     ///< Last net list read with relative path.
+
     // we'll use lower case function names for private member functions.
     void createPopUpMenuForZones( ZONE_CONTAINER* edge_zone, wxMenu* aPopMenu );
     void createPopUpMenuForFootprints( MODULE* aModule, wxMenu* aPopMenu );
@@ -156,8 +161,8 @@ public:
      * @param aData = a pointer on an auxiliary data (NULL if not used)
      */
     virtual void PrintPage( wxDC* aDC, bool aPrint_Sheet_Ref,
-                    int aPrintMask, bool aPrintMirrorMode,
-                    void * aData = NULL);
+                            int aPrintMask, bool aPrintMirrorMode,
+                            void * aData = NULL );
 
     void             GetKicadAbout( wxCommandEvent& event );
 
@@ -168,7 +173,7 @@ public:
 
     /** Function SetGridVisibility() , virtual
      * It may be overloaded by derived classes
-     * if you want to store/retrieve the grid visiblity in configuration.
+     * if you want to store/retrieve the grid visibility in configuration.
      * @param aVisible = true if the grid must be shown
      */
     virtual void     SetGridVisibility(bool aVisible);
@@ -186,16 +191,67 @@ public:
     // Configurations:
     void             InstallConfigFrame( const wxPoint& pos );
     void             Process_Config( wxCommandEvent& event );
-    void             Update_config( wxWindow* displayframe );
 
-    /** Function Read_Config
-     * Read the project configuration file
-     * @param projectFileName = the config filename
-     *  if not found use kicad.pro
-     *  if not found : initialize default values
-     * @return true if the current config is modified, false if no change
+    PARAM_CFG_ARRAY& GetProjectFileParameters();
+    void             SaveProjectSettings();
+
+    /**
+     * Load the project file configuration settings.
+     *
+     * @param aProjectFileName = The project filename.
+     *  if not found use kicad.pro and initialize default values
+     * @return always returns true.
+     */
+    bool             LoadProjectSettings( const wxString& aProjectFileName );
+
+    /**
+     * Get the list of application specific settings.
+     *
+     * @return - Reference to the list of applications settings.
+     */
+    PARAM_CFG_ARRAY& GetConfigurationSettings();
+
+    /**
+     * Load applications settings specific to PCBNew.
+     *
+     * This overrides the base class WinEDA_BasePcbFrame::LoadSettings() to
+     * handle settings specific common to the PCB layout application.  It
+     * calls down to the base class to load settings common to all PCB type
+     * drawing frames.  Please put your application settings for PCBNew here
+     * to avoid having application settings loaded all over the place.
+     */
+    virtual void LoadSettings();
+
+    /**
+     * Save applications settings common to PCBNew.
+     *
+     * This overrides the base class WinEDA_BasePcbFrame::SaveSettings() to
+     * save settings specific to the PCB layout application main window.  It
+     * calls down to the base class to save settings common to all PCB type
+     * drawing frames.  Please put your application settings for PCBNew here
+     * to avoid having application settings saved all over the place.
+     */
+    virtual void SaveSettings();
+
+    /**
+     * Get the last net list read with the net list dialog box.
+     *
+     * @return - Absolute path and file name of the last net list file successfully read.
      */
-    bool             Read_Config( const wxString& projectFileName );
+    wxString         GetLastNetListRead();
+
+    /**
+     * Set the last net list successfully read by the net list dialog box.
+     *
+     * Note: the file path is converted to a path relative to the project file path.  If
+     *       the path cannot be made relative, than m_lastNetListRead is set to and empty
+     *       string.  This could happen when the net list file is on a different drive than
+     *       the project file.  The advantage of relative paths is that is more likely to
+     *       work when opening the same project from both Windows and Linux.
+     *
+     * @param aNetListFile - The last net list file with full path successfully read.
+     */
+    void             SetLastNetListRead( const wxString& aNetListFile );
 
     void             OnHotKey( wxDC*           DC,
                                int             hotkey,
@@ -287,7 +343,7 @@ public:
      * Function OnRightClick
      * populates a popup menu with the choices appropriate for the current
      *context.
-     * The caller will add the ZOOM menu choices afterwards.
+     * The caller will add the ZOOM menu choices afterward.
      * @param aMousePos The current mouse position
      * @param aPopMenu The menu to add to.
      */
@@ -331,7 +387,7 @@ public:
      * @param aRedoCommand = a bool: true for redo, false for undo
      * @param aRebuildRatsnet = a bool: true to rebuild ratsnet (normal use),
      *                          false
-     * to just retrieve las state (used in abort commands that do not need to
+     * to just retrieve last state (used in abort commands that do not need to
      * rebuild ratsnest)
      */
     void PutDataInPreviousState( PICKED_ITEMS_LIST* aList,
@@ -420,7 +476,7 @@ public:
 
     void SetToolbars();
     void Process_Settings( wxCommandEvent& event );
-    void InstallPcbOptionsFrame( int id );
+    void OnConfigurePcbOptions( wxCommandEvent& aEvent );
     void InstallDisplayOptionsDialog( wxCommandEvent& aEvent );
     void InstallPcbGlobalDeleteFrame( const wxPoint& pos );
 
@@ -963,28 +1019,6 @@ public:
     void         Begin_Self( wxDC* DC );
     MODULE*      Genere_Self( wxDC* DC );
 
-    /**
-     * Load applications settings specific to the PCBNew.
-     *
-     * This overrides the base class WinEDA_BasePcbFrame::LoadSettings() to
-     * handle settings specific common to the PCB layout application.  It
-     * calls down to the base class to load settings common to all PCB type
-     * drawing frames.  Please put your application settings for PCBNew here
-     * to avoid having application settings loaded all over the place.
-     */
-    virtual void LoadSettings();
-
-    /**
-     * Save applications settings common to PCB draw frame objects.
-     *
-     * This overrides the base class WinEDA_BasePcbFrame::SaveSettings() to
-     * save settings specific to the PCB layout application main window.  It
-     * calls down to the base class to save settings common to all PCB type
-     * drawing frames.  Please put your application settings for PCBNew here
-     * to avoid having application settings saved all over the place.
-     */
-    virtual void SaveSettings();
-
     /** function SetLanguage
      * called on a language menu selection
      */

pcbnew/dialog_general_options.cpp

@@ -99,7 +99,7 @@ void Dialog_GeneralOptions::OnOkClick( wxCommandEvent& event )
     g_MagneticPadOption   = m_MagneticPadOptCtrl->GetSelection();
     g_MagneticTrackOption = m_MagneticTrackOptCtrl->GetSelection();
 
-    EndModal( 1 );
+    EndModal( wxID_OK );
 }
 
 

pcbnew/dialog_graphic_items_options.cpp

@@ -16,21 +16,11 @@
 extern int g_DrawDefaultLineThickness;
 
 
-void WinEDA_PcbFrame::InstallPcbOptionsFrame( int id )
+void WinEDA_PcbFrame::OnConfigurePcbOptions( wxCommandEvent& aEvent )
 {
-    switch( id )
-    {
-    case ID_PCB_DRAWINGS_WIDTHS_SETUP:
-    {
-        DIALOG_GRAPHIC_ITEMS_OPTIONS dlg( this );
-        dlg.ShowModal();
-    }
-    break;
-
-    default:
-        wxMessageBox( wxT( "InstallPcbOptionsFrame() id error" ) );
-        break;
-    }
+    DIALOG_GRAPHIC_ITEMS_OPTIONS dlg( this );
+
+    dlg.ShowModal();
 }
 
 
@@ -143,7 +133,7 @@ void DIALOG_GRAPHIC_ITEMS_OPTIONS::OnOkClick( wxCommandEvent& event )
     if( g_DrawDefaultLineThickness < 0 )
         g_DrawDefaultLineThickness = 0;
 
-    EndModal( 1 );
+    EndModal( wxID_OK );
 }
 
 

pcbnew/dialog_netlist.cpp

@@ -18,14 +18,18 @@ extern void TestFor_Duplicate_Missing_And_Extra_Footprints( wxWindow*       fram
 
 
 
-/*************************************************************************/
 void WinEDA_PcbFrame::InstallNetlistFrame( wxDC* DC, const wxPoint& pos )
-/*************************************************************************/
 {
-    /* Setup the default netlist file name according to the board file name */
-    wxFileName fn = GetScreen()->m_FileName;
+    /* Setup the netlist file name to the last net list file read or the board file
+     * name if no last file read is not set.
+     */
+    wxFileName fn = GetLastNetListRead();
 
-    fn.SetExt( NetExtBuffer );
+    if( !fn.FileExists() )
+    {
+        fn = GetScreen()->m_FileName;
+        fn.SetExt( NetExtBuffer );
+    }
 
     DIALOG_NETLIST frame( this, DC, fn.GetFullPath() );
 
@@ -33,12 +37,13 @@ void WinEDA_PcbFrame::InstallNetlistFrame( wxDC* DC, const wxPoint& pos )
 }
 
 
-DIALOG_NETLIST::DIALOG_NETLIST( WinEDA_PcbFrame* aParent, wxDC * aDC, const wxString & aNetlistFull_Filename )
-    : DIALOG_NETLIST_FBP(aParent)
+DIALOG_NETLIST::DIALOG_NETLIST( WinEDA_PcbFrame* aParent, wxDC * aDC,
+                                const wxString & aNetlistFull_Filename )
+    : DIALOG_NETLIST_FBP( aParent )
 {
     m_Parent = aParent;
     m_DC = aDC;
-    m_NetlistFilenameCtrl->SetValue(aNetlistFull_Filename);
+    m_NetlistFilenameCtrl->SetValue( aNetlistFull_Filename );
 
     Init();
 
@@ -54,18 +59,30 @@ void DIALOG_NETLIST::Init()
 
 void DIALOG_NETLIST::OnOpenNelistClick( wxCommandEvent& event )
 {
-    wxString fullfilename;
-
-    wxFileDialog FilesDialog( this, _( "Netlist Selection:" ), wxGetCwd(),
-                              wxEmptyString, NetlistFileWildcard,
-                              wxFD_DEFAULT_STYLE | wxFD_FILE_MUST_EXIST );
+    wxString lastPath = wxFileName::GetCwd();
+    wxString lastNetlistRead = m_Parent->GetLastNetListRead();
+
+    if( !lastNetlistRead.IsEmpty() && !wxFileName::FileExists( lastNetlistRead ) )
+    {
+        lastNetlistRead = wxEmptyString;
+    }
+    else
+    {
+        wxFileName fn = lastNetlistRead;
+        lastPath = fn.GetPath();
+        lastNetlistRead = fn.GetName();
+    }
+
+    wxLogDebug( wxT( "Last net list read path <%s>, file name <%s>." ),
+                GetChars( lastPath ), GetChars( lastNetlistRead ) );
+
+    wxFileDialog FilesDialog( this, _( "Select Netlist" ), lastPath, lastNetlistRead,
+                              NetlistFileWildcard, wxFD_DEFAULT_STYLE | wxFD_FILE_MUST_EXIST );
 
     if( FilesDialog.ShowModal() != wxID_OK )
         return;
 
-    fullfilename = FilesDialog.GetPath( );
-
-    m_NetlistFilenameCtrl->SetValue( fullfilename );
+    m_NetlistFilenameCtrl->SetValue( FilesDialog.GetPath() );
 }
 
 
@@ -75,17 +92,18 @@ void DIALOG_NETLIST::OnReadNetlistFileClick( wxCommandEvent& event )
     fn.SetExt( NetCmpExtBuffer );
 
     m_Parent->ReadPcbNetlist( m_NetlistFilenameCtrl->GetValue(),
-                    fn.GetFullPath(), m_MessageWindow,
-                    m_ChangeExistingFootprintCtrl->GetSelection() == 1 ? TRUE : FALSE,
-                    m_DeleteBadTracks->GetSelection() == 1 ? TRUE : FALSE,
-                    m_RemoveExtraFootprintsCtrl->GetSelection() == 1 ? TRUE : FALSE,
-                    m_Select_By_Timestamp->GetSelection() == 1 ? TRUE : FALSE );
+                              fn.GetFullPath(), m_MessageWindow,
+                              m_ChangeExistingFootprintCtrl->GetSelection() == 1 ? TRUE : FALSE,
+                              m_DeleteBadTracks->GetSelection() == 1 ? TRUE : FALSE,
+                              m_RemoveExtraFootprintsCtrl->GetSelection() == 1 ? TRUE : FALSE,
+                              m_Select_By_Timestamp->GetSelection() == 1 ? TRUE : FALSE );
 }
 
 
 void DIALOG_NETLIST::OnTestFootprintsClick( wxCommandEvent& event )
 {
-    TestFor_Duplicate_Missing_And_Extra_Footprints( this, m_NetlistFilenameCtrl->GetValue(), m_Parent->GetBoard() );
+    TestFor_Duplicate_Missing_And_Extra_Footprints( this, m_NetlistFilenameCtrl->GetValue(),
+                                                    m_Parent->GetBoard() );
 }
 
 

pcbnew/dialog_pad_properties.cpp

@@ -97,11 +97,10 @@ DIALOG_PAD_PROPERTIES::DIALOG_PAD_PROPERTIES( WinEDA_BasePcbFrame* parent, D_PAD
 }
 
 
-/*************************************************************/
 void WinEDA_BasePcbFrame::InstallPadOptionsFrame( D_PAD* Pad )
-/*************************************************************/
 {
     DIALOG_PAD_PROPERTIES dlg( this, Pad );
+
     dlg.ShowModal();
 }
 
@@ -441,9 +440,12 @@ void DIALOG_PAD_PROPERTIES::PadPropertiesAccept( wxCommandEvent& event )
     g_Pad_Master.m_PadShape = CodeShape[m_PadShape->GetSelection()];
 
     // Read pad clearances values:
-    g_Pad_Master.m_LocalClearance = ReturnValueFromTextCtrl( *m_NetClearanceValueCtrl, internalUnits );
-    g_Pad_Master.m_LocalSolderMaskMargin = ReturnValueFromTextCtrl( *m_SolderMaskMarginCtrl, internalUnits );
-    g_Pad_Master.m_LocalSolderPasteMargin = ReturnValueFromTextCtrl( *m_SolderPasteMarginCtrl, internalUnits );
+    g_Pad_Master.m_LocalClearance = ReturnValueFromTextCtrl( *m_NetClearanceValueCtrl,
+                                                             internalUnits );
+    g_Pad_Master.m_LocalSolderMaskMargin = ReturnValueFromTextCtrl( *m_SolderMaskMarginCtrl,
+                                                                    internalUnits );
+    g_Pad_Master.m_LocalSolderPasteMargin = ReturnValueFromTextCtrl( *m_SolderPasteMarginCtrl,
+                                                                     internalUnits );
     double   dtmp = 0.0;
     msg = m_SolderPasteMarginRatioCtrl->GetValue();
     msg.ToDouble( &dtmp );
@@ -664,7 +666,7 @@ void DIALOG_PAD_PROPERTIES::PadPropertiesAccept( wxCommandEvent& event )
         m_Parent->OnModify();
     }
 
-    EndModal(1);
+    EndModal( wxID_OK );
 
     if( RastnestIsChanged )  // The net ratsnest must be recalculated
         m_Parent->GetBoard()->m_Status_Pcb = 0;
@@ -674,6 +676,6 @@ void DIALOG_PAD_PROPERTIES::PadPropertiesAccept( wxCommandEvent& event )
 void DIALOG_PAD_PROPERTIES::OnCancelButtonClick( wxCommandEvent& event )
 /*********************************************************************/
 {
-    EndModal(0);
+    EndModal( wxID_CANCEL );
 }
 

pcbnew/dialog_pcbnew_config_libs_and_paths.cpp

@@ -128,7 +128,7 @@ void DIALOG_PCBNEW_CONFIG_LIBS::OnOkClick( wxCommandEvent& event )
             g_LibName_List.Add(m_ListLibr->GetString(ii) );
     }
 
-    m_Parent->Update_config( this );
+    m_Parent->SaveProjectSettings();
     EndModal( wxID_OK );
 }
 

pcbnew/files.cpp

@@ -31,17 +31,14 @@ void WinEDA_PcbFrame::OnFileHistory( wxCommandEvent& event )
     }
 }
 
-/****************************************************/
-void WinEDA_PcbFrame::Files_io( wxCommandEvent& event )
-/****************************************************/
 
 /* Handle the read/write file commands
  */
+void WinEDA_PcbFrame::Files_io( wxCommandEvent& event )
 {
     int        id = event.GetId();
     wxString   msg;
 
-
     // If an edition is in progress, stop it
     DrawPanel->UnManageCursor( 0, wxCURSOR_ARROW );
 
@@ -69,13 +66,13 @@ void WinEDA_PcbFrame::Files_io( wxCommandEvent& event )
 
         if( !fn.FileExists() )
         {
-            msg = _( "Recovery file " ) + fn.GetFullPath() + _( " not found" );
+            msg = _( "Recovery file " ) + fn.GetFullPath() + _( " not found." );
             DisplayInfoMessage( this, msg );
             break;
         }
         else
         {
-            msg = _( "Ok to load Recovery file " ) + fn.GetFullPath();
+            msg = _( "OK to load recovery file " ) + fn.GetFullPath();
             if( !IsOK( this, msg ) )
                 break;
         }
@@ -209,7 +206,7 @@ this file again."));
         ReadPcbFile( source, true );
     else
     {
-        Read_Config( GetScreen()->m_FileName );
+        LoadProjectSettings( GetScreen()->m_FileName );
 
         // Update the option toolbar
         m_DisplayPcbTrackFill = DisplayOpt.DisplayPcbTrackFill;
@@ -228,11 +225,11 @@ this file again."));
     /* If append option: change the initial board name to <oldname>-append.brd */
     if( Append )
     {
-        wxString new_filename = GetScreen()->m_FileName.BeforeLast('.');
-        if ( ! new_filename.EndsWith(wxT("-append")) )
-            new_filename += wxT("-append");
+        wxString new_filename = GetScreen()->m_FileName.BeforeLast( '.' );
+        if ( ! new_filename.EndsWith( wxT( "-append" ) ) )
+            new_filename += wxT( "-append" );
 
-        new_filename += wxT(".") + PcbExtBuffer;
+        new_filename += wxT( "." ) + PcbExtBuffer;
 
         OnModify();
         GetScreen()->m_FileName = new_filename;
@@ -251,11 +248,11 @@ this file again."));
      * if board items are not visible after loading a board...
      * Grid and ratsnest can be left to their previous state
      */
-    bool showGrid = IsElementVisible(GRID_VISIBLE);
-    bool showRats = IsElementVisible(RATSNEST_VISIBLE);
-    SetVisibleAlls( );
-    SetElementVisibility(GRID_VISIBLE, showGrid);
-    SetElementVisibility(RATSNEST_VISIBLE, showRats);
+    bool showGrid = IsElementVisible( GRID_VISIBLE );
+    bool showRats = IsElementVisible( RATSNEST_VISIBLE );
+    SetVisibleAlls();
+    SetElementVisibility( GRID_VISIBLE, showGrid );
+    SetElementVisibility( RATSNEST_VISIBLE, showRats );
 
     // Update info shown by the horizontal toolbars
     GetBoard()->SetCurrentNetClass( NETCLASS::Default );
@@ -265,7 +262,7 @@ this file again."));
 
     ReCreateLayerBox( NULL );
     AuxiliaryToolBar_Update_UI();
-    syncLayerWidget( );
+    syncLayerWidget();
 
     // Display the loaded board:
     Zoom_Automatique( false );
@@ -294,12 +291,9 @@ this file again."));
 }
 
 
-/***********************************************************/
-bool WinEDA_PcbFrame::SavePcbFile( const wxString& FileName )
-/************************************************************/
-
 /* Write the board file
  */
+bool WinEDA_PcbFrame::SavePcbFile( const wxString& FileName )
 {
     wxFileName  backupFileName;
     wxFileName  pcbFileName;

pcbnew/netlist.cpp

@@ -116,8 +116,7 @@ FILE * OpenNetlistFile( const wxString& aFullFileName )
     if( netfile == NULL )
     {
         wxString msg;
-        msg.Printf( _( "Netlist file %s not found" ),
-                    GetChars( aFullFileName ) );
+        msg.Printf( _( "Netlist file %s not found" ), GetChars( aFullFileName ) );
         DisplayError( NULL, msg );
     }
 
@@ -149,14 +148,13 @@ FILE * OpenNetlistFile( const wxString& aFullFileName )
  *  }
  * #End
  */
-bool WinEDA_PcbFrame::ReadPcbNetlist(
-                     const wxString&  aNetlistFullFilename,
-                     const wxString&  aCmpFullFileName,
-                     wxTextCtrl*      aMessageWindow,
-                     bool             aChangeFootprint,
-                     bool             aDeleteBadTracks,
-                     bool             aDeleteExtraFootprints,
-                     bool             aSelect_By_Timestamp )
+bool WinEDA_PcbFrame::ReadPcbNetlist( const wxString&  aNetlistFullFilename,
+                                      const wxString&  aCmpFullFileName,
+                                      wxTextCtrl*      aMessageWindow,
+                                      bool             aChangeFootprint,
+                                      bool             aDeleteBadTracks,
+                                      bool             aDeleteExtraFootprints,
+                                      bool             aSelect_By_Timestamp )
 {
     int     State, Comment;
     MODULE* Module = NULL;
@@ -168,11 +166,12 @@ bool WinEDA_PcbFrame::ReadPcbNetlist(
     if( !netfile )
         return false;
 
+    SetLastNetListRead( aNetlistFullFilename );
+
     if( aMessageWindow )
     {
         wxString msg;
-        msg.Printf( _( "Reading Netlist \"%s\"" ),
-                    GetChars( aNetlistFullFilename ) );
+        msg.Printf( _( "Reading Netlist \"%s\"" ), GetChars( aNetlistFullFilename ) );
         aMessageWindow->AppendText( msg + wxT( "\n" ) );
     }
 
@@ -181,7 +180,8 @@ bool WinEDA_PcbFrame::ReadPcbNetlist(
 
     OnModify();
     GetBoard()->m_Status_Pcb = 0;
-    State = 0; Comment = 0;
+    State = 0;
+    Comment = 0;
     s_NbNewModules = 0;
 
     wxBusyCursor dummy;        // Shows an hourglass while calculating

pcbnew/pcbframe.cpp

@@ -47,6 +47,8 @@
 #include "dialog_design_rules.h"
 #include "class_pcb_layer_widget.h"
 #include "hotkeys.h"
+#include "pcbnew_config.h"
+
 
 extern int g_DrawDefaultLineThickness;
 
@@ -109,30 +111,24 @@ BEGIN_EVENT_TABLE( WinEDA_PcbFrame, WinEDA_BasePcbFrame )
     EVT_MENU( wxID_EXIT, WinEDA_PcbFrame::OnQuit )
 
     // menu Config
-    EVT_MENU( ID_CONFIG_REQ,
-                    WinEDA_PcbFrame::Process_Config )
-    EVT_MENU( ID_CONFIG_SAVE,
-                    WinEDA_PcbFrame::Process_Config )
-    EVT_MENU( ID_CONFIG_READ,
-                    WinEDA_PcbFrame::Process_Config )
+    EVT_MENU( ID_PCB_DRAWINGS_WIDTHS_SETUP, WinEDA_PcbFrame::OnConfigurePcbOptions )
+    EVT_MENU( ID_CONFIG_REQ, WinEDA_PcbFrame::Process_Config )
+    EVT_MENU( ID_CONFIG_SAVE, WinEDA_PcbFrame::Process_Config )
+    EVT_MENU( ID_CONFIG_READ, WinEDA_PcbFrame::Process_Config )
     EVT_MENU_RANGE( ID_PREFERENCES_HOTKEY_START,
                     ID_PREFERENCES_HOTKEY_END,
                     WinEDA_PcbFrame::Process_Config )
-
     EVT_MENU( ID_MENU_PCB_SHOW_HIDE_LAYERS_MANAGER_DIALOG,
-                WinEDA_PcbFrame::Process_Config )
+              WinEDA_PcbFrame::Process_Config )
     EVT_MENU( ID_OPTIONS_SETUP, WinEDA_PcbFrame::Process_Config )
     EVT_MENU( ID_PCB_LAYERS_SETUP, WinEDA_PcbFrame::Process_Config )
     EVT_MENU( ID_PCB_MASK_CLEARANCE, WinEDA_PcbFrame::Process_Config )
-    EVT_MENU( ID_PCB_DRAWINGS_WIDTHS_SETUP, WinEDA_PcbFrame::Process_Config )
     EVT_MENU( ID_PCB_PAD_SETUP, WinEDA_PcbFrame::Process_Config )
     EVT_MENU( ID_CONFIG_SAVE, WinEDA_PcbFrame::Process_Config )
     EVT_MENU( ID_CONFIG_READ, WinEDA_PcbFrame::Process_Config )
     EVT_MENU( ID_PCB_DISPLAY_OPTIONS_SETUP,
               WinEDA_PcbFrame::InstallDisplayOptionsDialog )
-
-    EVT_MENU( ID_PCB_USER_GRID_SETUP,
-              WinEDA_PcbFrame::Process_Special_Functions )
+    EVT_MENU( ID_PCB_USER_GRID_SETUP, WinEDA_PcbFrame::Process_Special_Functions )
 
     EVT_MENU_RANGE( ID_LANGUAGE_CHOICE, ID_LANGUAGE_CHOICE_END,
                     WinEDA_PcbFrame::SetLanguage )
@@ -390,9 +386,6 @@ WinEDA_PcbFrame::WinEDA_PcbFrame( wxWindow* father,
 
 WinEDA_PcbFrame::~WinEDA_PcbFrame()
 {
-    extern PARAM_CFG_BASE* ParamCfgList[];
-
-    wxGetApp().SaveCurrentSetupValues( ParamCfgList );
     delete m_drc;
 }
 
@@ -417,7 +410,7 @@ void WinEDA_PcbFrame::ReFillLayerWidget()
 
 void WinEDA_PcbFrame::OnQuit( wxCommandEvent & WXUNUSED(event) )
 {
-    Close(true);
+    Close( true );
 }
 
 void WinEDA_PcbFrame::OnCloseWindow( wxCloseEvent& Event )
@@ -450,6 +443,13 @@ void WinEDA_PcbFrame::OnCloseWindow( wxCloseEvent& Event )
         }
     }
 
+    if( !GetScreen()->m_FileName.IsEmpty() )
+    {
+        wxFileName fn = GetScreen()->m_FileName;
+        fn.SetExt( ProjectFileExtension );
+        wxGetApp().WriteProjectConfig( fn.GetFullPath(), GROUP, GetProjectFileParameters() );
+    }
+
     SaveSettings();
 
     // do not show the window because ScreenPcb will be deleted and we do not
@@ -499,6 +499,11 @@ void WinEDA_PcbFrame::LoadSettings()
     if( config == NULL )
         return;
 
+    /* The configuration setting that used to be mixed in with the project
+     * file settings.
+     */
+    wxGetApp().ReadCurrentSetupValues( GetConfigurationSettings() );
+
     WinEDA_BasePcbFrame::LoadSettings();
 
     long tmp;
@@ -519,6 +524,11 @@ void WinEDA_PcbFrame::SaveSettings()
     if( config == NULL )
         return;
 
+    /* The configuration setting that used to be mixed in with the project
+     * file settings.
+     */
+    wxGetApp().SaveCurrentSetupValues( GetConfigurationSettings() );
+
     WinEDA_BasePcbFrame::SaveSettings();
 
     wxRealPoint GridSize = GetScreen()->GetGridSize();
@@ -639,3 +649,32 @@ void WinEDA_PcbFrame::SetLanguage( wxCommandEvent& event )
     if( m_ModuleEditFrame )
         m_ModuleEditFrame->WinEDA_DrawFrame::SetLanguage( event );
 }
+
+
+wxString WinEDA_PcbFrame::GetLastNetListRead()
+{
+    wxFileName absoluteFileName = m_lastNetListRead;
+    wxFileName pcbFileName = GetScreen()->m_FileName;
+
+    if( !absoluteFileName.MakeAbsolute( pcbFileName.GetPath() )
+        || !absoluteFileName.FileExists() )
+    {
+        absoluteFileName.Clear();
+        m_lastNetListRead = wxEmptyString;
+    }
+
+    return absoluteFileName.GetFullPath();
+}
+
+
+void WinEDA_PcbFrame::SetLastNetListRead( const wxString& aLastNetListRead )
+{
+    wxFileName relativeFileName = aLastNetListRead;
+    wxFileName pcbFileName = GetScreen()->m_FileName;
+
+    if( relativeFileName.MakeRelativeTo( pcbFileName.GetPath() )
+        && relativeFileName.GetFullPath() != aLastNetListRead )
+    {
+        m_lastNetListRead = relativeFileName.GetFullPath();
+    }
+}

pcbnew/pcbnew.cpp

@@ -63,8 +63,7 @@ wxPoint                g_Offset_Module;     /* Offset de trace du modul en depl
 wxString               g_Current_PadName;   // Last used pad name (pad num)
 
 // Wildcard for footprint libraries filesnames
-const wxString         g_FootprintLibFileWildcard( wxT(
-                                                      "Kicad footprint library file (*.mod)|*.mod" ) );
+const wxString         g_FootprintLibFileWildcard( wxT( "Kicad footprint library file (*.mod)|*.mod" ) );
 
 /* Name of the document footprint list
  * usually located in share/modules/footprints_doc
@@ -126,10 +125,8 @@ bool WinEDA_App::OnInit()
 
         if( fn.GetExt() != BoardFileExtension )
         {
-            wxLogDebug( wxT(
-                           "PcbNew file <%s> has the wrong extension.\
-Changing extension to .brd."                                                                         ),
-                       GetChars( fn.GetFullPath() ) );
+            wxLogDebug( wxT( "PcbNew file <%s> has the wrong extension.  \
+Changing extension to .brd." ), GetChars( fn.GetFullPath() ) );
             fn.SetExt( BoardFileExtension );
         }
 
@@ -137,7 +134,6 @@ Changing extension to .brd."
             wxSetWorkingDirectory( fn.GetPath() );
     }
 
-    wxGetApp().ReadCurrentSetupValues( ParamCfgList );
     g_DrawBgColor = BLACK;
     Read_Hotkey_Config( frame, false );  /* Must be called before creating the
                                           * main frame in order to display the
@@ -145,7 +141,7 @@ Changing extension to .brd."
 
 
     frame = new WinEDA_PcbFrame( NULL, wxT( "PcbNew" ),
-                                wxPoint( 0, 0 ), wxSize( 600, 400 ) );
+                                 wxPoint( 0, 0 ), wxSize( 600, 400 ) );
     frame->SetTitle( GetTitle() + wxT( " " ) + GetBuildVersion() );
     ActiveScreen = ScreenPcb;
 
@@ -157,7 +153,7 @@ Changing extension to .brd."
         SetupServerFunction( RemoteCommand );
     }
 
-    frame->Read_Config( fn.GetFullPath() );
+    frame->LoadProjectSettings( fn.GetFullPath() );
 
     frame->Zoom_Automatique( true );
 

pcbnew/pcbnew_config.cpp

@@ -42,8 +42,10 @@ void WinEDA_PcbFrame::Process_Config( wxCommandEvent& event )
         if( m_OptionsToolBar )
         {   //This command is same as the Options Vertical Toolbar
             // tool Show/hide layers manager
-            bool state = m_OptionsToolBar->GetToolState(ID_TB_OPTIONS_SHOW_MANAGE_LAYERS_VERTICAL_TOOLBAR);
-            m_OptionsToolBar->ToggleTool(ID_TB_OPTIONS_SHOW_MANAGE_LAYERS_VERTICAL_TOOLBAR, !state);
+            bool state =
+                m_OptionsToolBar->GetToolState( ID_TB_OPTIONS_SHOW_MANAGE_LAYERS_VERTICAL_TOOLBAR );
+            m_OptionsToolBar->ToggleTool( ID_TB_OPTIONS_SHOW_MANAGE_LAYERS_VERTICAL_TOOLBAR,
+                                          !state );
             wxCommandEvent event( wxEVT_COMMAND_TOOL_CLICKED,
                                   ID_TB_OPTIONS_SHOW_MANAGE_LAYERS_VERTICAL_TOOLBAR );
             wxPostEvent( this, event );
@@ -72,16 +74,12 @@ void WinEDA_PcbFrame::Process_Config( wxCommandEvent& event )
         }
         break;
 
-    case ID_PCB_DRAWINGS_WIDTHS_SETUP:
-        InstallPcbOptionsFrame( id );
-        break;
-
     case ID_PCB_PAD_SETUP:
         InstallPadOptionsFrame( NULL );
         break;
 
     case ID_CONFIG_SAVE:
-        Update_config( this );
+        SaveProjectSettings();
         break;
 
     case ID_CONFIG_READ:
@@ -104,15 +102,14 @@ void WinEDA_PcbFrame::Process_Config( wxCommandEvent& event )
             break;
         }
 
-        Read_Config( dlg.GetPath() );
+        LoadProjectSettings( dlg.GetPath() );
         break;
     }
     case ID_PREFERENCES_HOTKEY_CREATE_CONFIG:
         fn.SetPath( ReturnHotkeyConfigFilePath( g_ConfigFileLocationChoice ) );
         fn.SetName( HOTKEY_FILENAME );
         fn.SetExt( DEFAULT_HOTKEY_FILENAME_EXT );
-        WriteHotkeyConfigFile( fn.GetFullPath(), s_Pcbnew_Editor_Hokeys_Descr,
-                               true );
+        WriteHotkeyConfigFile( fn.GetFullPath(), s_Pcbnew_Editor_Hokeys_Descr, true );
         break;
 
     case ID_PREFERENCES_HOTKEY_READ_CONFIG:
@@ -141,8 +138,7 @@ void WinEDA_PcbFrame::Process_Config( wxCommandEvent& event )
         break;
 
     default:
-        DisplayError( this,
-                      wxT( "WinEDA_PcbFrame::Process_Config internal error" ) );
+        DisplayError( this, wxT( "WinEDA_PcbFrame::Process_Config internal error" ) );
     }
 }
 
@@ -152,28 +148,26 @@ void WinEDA_PcbFrame::Process_Config( wxCommandEvent& event )
  */
 bool Read_Hotkey_Config( WinEDA_DrawFrame* frame, bool verbose )
 {
-    wxString FullFileName = ReturnHotkeyConfigFilePath(
-        g_ConfigFileLocationChoice );
+    wxString FullFileName = ReturnHotkeyConfigFilePath( g_ConfigFileLocationChoice );
 
     FullFileName += HOTKEY_FILENAME;
-    FullFileName += wxT(".");
+    FullFileName += wxT( "." );
     FullFileName += DEFAULT_HOTKEY_FILENAME_EXT;
-    return frame->ReadHotkeyConfigFile( FullFileName,
-                                        s_Pcbnew_Editor_Hokeys_Descr,
-                                        verbose );
+    return frame->ReadHotkeyConfigFile( FullFileName, s_Pcbnew_Editor_Hokeys_Descr, verbose );
 }
 
 
-/** Function Read_Config
- * Read the project configuration file
- * @param projectFileName = the config filename
- *  if not found use kicad.pro
- *  if not found : initialize default values
- * @return true if the current config is modified, false if no change
+/**
+ * Read the project configuration file settings.
+ *
+ * @param aProjectFileName = The project file name to load.  If aProjectFileName
+ *                           is not found load the default project file kicad.pro
+ *                           and initialize setting to their default value.
+ * @return Always returns true.
  */
-bool WinEDA_PcbFrame::Read_Config( const wxString& projectFileName )
+bool WinEDA_PcbFrame::LoadProjectSettings( const wxString& aProjectFileName )
 {
-    wxFileName fn = projectFileName;
+    wxFileName fn = aProjectFileName;
 
     if( fn.GetExt() != ProjectFileExtension )
         fn.SetExt( ProjectFileExtension );
@@ -183,8 +177,7 @@ bool WinEDA_PcbFrame::Read_Config( const wxString& projectFileName )
     /* Initialize default values. */
     g_LibName_List.Clear();
 
-    wxGetApp().ReadProjectConfig( fn.GetFullPath(),
-                                  GROUP, ParamCfgList, FALSE );
+    wxGetApp().ReadProjectConfig( fn.GetFullPath(), GROUP, GetProjectFileParameters(), FALSE );
 
     /* User library path takes precedent over default library search paths. */
     wxGetApp().InsertLibraryPath( g_UserLibDirBuffer, 1 );
@@ -194,29 +187,254 @@ bool WinEDA_PcbFrame::Read_Config( const wxString& projectFileName )
      * if board items are not visible after loading a board...
      * Grid and ratsnest can be left to their previous state
      */
-    bool showGrid = IsElementVisible(GRID_VISIBLE);
-    bool showRats = IsElementVisible(RATSNEST_VISIBLE);
-    SetVisibleAlls( );
-    SetElementVisibility(GRID_VISIBLE, showGrid);
-    SetElementVisibility(RATSNEST_VISIBLE, showRats);
+    bool showGrid = IsElementVisible( GRID_VISIBLE );
+    bool showRats = IsElementVisible( RATSNEST_VISIBLE );
+    SetVisibleAlls();
+    SetElementVisibility( GRID_VISIBLE, showGrid );
+    SetElementVisibility( RATSNEST_VISIBLE, showRats );
     return TRUE;
 }
 
 
-void WinEDA_PcbFrame::Update_config( wxWindow* displayframe )
+void WinEDA_PcbFrame::SaveProjectSettings()
 {
     wxFileName fn;
 
     fn = GetScreen()->m_FileName;
     fn.SetExt( ProjectFileExtension );
 
-    wxFileDialog dlg( this, _( "Save Project File" ), fn.GetPath(),
-                      fn.GetFullName(), ProjectFileWildcard,
-                      wxFD_SAVE | wxFD_CHANGE_DIR );
+    wxFileDialog dlg( this, _( "Save Project File" ), fn.GetPath(), fn.GetFullName(),
+                      ProjectFileWildcard, wxFD_SAVE | wxFD_CHANGE_DIR );
 
     if( dlg.ShowModal() == wxID_CANCEL )
         return;
 
-    wxGetApp().WriteProjectConfig( fn.GetFullPath(), wxT( "/pcbnew" ),
-                                   ParamCfgList );
+    wxGetApp().WriteProjectConfig( dlg.GetPath(), GROUP, GetProjectFileParameters() );
+}
+
+
+/**
+ * Return project file parameter list for PCBNew.
+ *
+ * Populate the project file parameter array specific to PCBNew if it hasn't
+ * already been populated and return a reference to the array to the caller.
+ * Creating the parameter list at run time has the advantage of being able
+ * to define local variables.  The old method of statically building the array
+ * at compile time requiring global variable definitions by design.
+ */
+PARAM_CFG_ARRAY& WinEDA_PcbFrame::GetProjectFileParameters()
+{
+    if( !m_projectFileParams.empty() )
+        return m_projectFileParams;
+
+    m_projectFileParams.push_back( new PARAM_CFG_WXSTRING( wxT( "LibDir" ),&g_UserLibDirBuffer,
+                                                           GROUPLIB ) );
+    m_projectFileParams.push_back( new PARAM_CFG_LIBNAME_LIST( wxT( "LibName" ), &g_LibName_List,
+                                                               GROUPLIB ) );
+    m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "PadDrlX" ), &g_Pad_Master.m_Drill.x,
+                                                      320, 0, 0x7FFF ) );
+    m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "PadDimH" ), &g_Pad_Master.m_Size.x,
+                                                      550, 0, 0x7FFF ) );
+    m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "PadDimV" ), &g_Pad_Master.m_Size.y,
+                                                      550, 0, 0x7FFF ) );
+    m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "BoardThickness" ),
+                                                      &boardDesignSettings.m_BoardThickness,
+                                                      630, 0, 0xFFFF ) );
+    m_projectFileParams.push_back( new PARAM_CFG_BOOL( wxT( "SgPcb45" ), &Segments_45_Only,
+                                                       TRUE ) );
+    m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "TxtPcbV" ),
+                                                      &boardDesignSettings.m_PcbTextSize.y,
+                                                      600, TEXTS_MIN_SIZE, TEXTS_MAX_SIZE ) );
+    m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "TxtPcbH" ),
+                                                      &boardDesignSettings.m_PcbTextSize.x,
+                                                      600, TEXTS_MIN_SIZE, TEXTS_MAX_SIZE ) );
+    m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "TxtModV" ), &ModuleTextSize.y,
+                                                      500, TEXTS_MIN_SIZE, TEXTS_MAX_SIZE ) );
+    m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "TxtModH" ), &ModuleTextSize.x,
+                                                      500, TEXTS_MIN_SIZE, TEXTS_MAX_SIZE ) );
+    m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "TxtModW" ), &ModuleTextWidth,
+                                                      100, 1, TEXTS_MAX_WIDTH ) );
+    m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "VEgarde" ),
+                                                      &boardDesignSettings.m_SolderMaskMargin,
+                                                      100, 0, 10000 ) );
+    m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "DrawLar" ),
+                                                      &boardDesignSettings.m_DrawSegmentWidth,
+                                                      120, 0, 0xFFFF ) );
+    m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "EdgeLar" ),
+                                                      &boardDesignSettings.m_EdgeSegmentWidth,
+                                                      120, 0, 0xFFFF ) );
+    m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "TxtLar" ),
+                                                      &boardDesignSettings.m_PcbTextWidth,
+                                                      120, 0, 0xFFFF ) );
+    m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "MSegLar" ), &ModuleSegmentWidth,
+                                                      120, 0, 0xFFFF ) );
+    m_projectFileParams.push_back( new PARAM_CFG_WXSTRING( wxT( "LastNetListRead" ),
+                                                           &m_lastNetListRead ) );
+    return m_projectFileParams;
+}
+
+
+
+/*
+ * Return the PCBNew applications settings list.
+ *
+ * This replaces the old statically define list that had the project
+ * file settings and the application settings mixed together.  This
+ * was confusing and caused some settings to get saved and loaded
+ * incorrectly.  Currently, only the settings that are needed at start
+ * up by the main window are defined here.  There are other locally used
+ * settings are scattered throughout the PCBNew source code.  If you need
+ * to define a configuration setting that need to be loaded at run time,
+ * this is the place to define it.
+ *
+ * @todo: Define the configuration variables as member variables instead of
+ *        global variables or move them to the object class where they are
+ *        used.
+ */
+PARAM_CFG_ARRAY& WinEDA_PcbFrame::GetConfigurationSettings()
+{
+    if( !m_configSettings.empty() )
+        return m_configSettings;
+
+    m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "ViaSHole" ),
+                                                   &DisplayOpt.m_DisplayViaMode,
+                                                   VIA_SPECIAL_HOLE_SHOW, VIA_HOLE_NOT_SHOW,
+                                                   OPT_VIA_HOLE_END - 1 ) );
+    m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "ShowNetNamesMode" ),
+                                                   &DisplayOpt.DisplayNetNamesMode, 3, 0, 3 ) );
+    m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "Unite" ), &g_UnitMetric, FALSE ) );
+    m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "SegFill" ),
+                                                    &DisplayOpt.DisplayPcbTrackFill, TRUE ) );
+    m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "TrackDisplayClearance" ),
+                                                   &DisplayOpt.ShowTrackClearanceMode,
+                                                   SHOW_CLEARANCE_NEW_TRACKS_AND_VIA_AREAS ) );
+    m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "PadFill" ),
+                                                    &DisplayOpt.DisplayPadFill, TRUE ) );
+    m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "ViaFill" ),
+                                                    &DisplayOpt.DisplayViaFill, TRUE ) );
+    m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "PadAffG" ),
+                                                    &DisplayOpt.DisplayPadIsol, TRUE ) );
+    m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "PadSNum" ),
+                                                    &DisplayOpt.DisplayPadNum, TRUE ) );
+    m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "ModAffC" ),
+                                                   &DisplayOpt.DisplayModEdge, FILLED, 0, 2 ) );
+    m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "ModAffT" ),
+                                                   &DisplayOpt.DisplayModText, FILLED, 0, 2 ) );
+    m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "PcbAffT" ),
+                                                   &DisplayOpt.DisplayDrawItems, FILLED, 0, 2 ) );
+    m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLay0" ), LOC_COLOR( 0 ),
+                                                        GREEN ) );
+    m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLay1" ), LOC_COLOR( 1 ),
+                                                        BLUE ) );
+    m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLay2" ), LOC_COLOR( 2 ),
+                                                        LIGHTGRAY ) );
+    m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLay3" ), LOC_COLOR( 3 ),
+                                                        5 ) );
+    m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLay4" ), LOC_COLOR( 4 ),
+                                                        4 ) );
+    m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLay5" ), LOC_COLOR( 5 ),
+                                                        5 ) );
+    m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLay6" ), LOC_COLOR( 6 ),
+                                                        6 ) );
+    m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLay7" ), LOC_COLOR( 7 ),
+                                                        5 ) );
+    m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLay8" ), LOC_COLOR( 8 ),
+                                                        7 ) );
+    m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLay9" ), LOC_COLOR( 9 ),
+                                                        1 ) );
+    m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayA" ), LOC_COLOR( 10 ),
+                                                        2 ) );
+    m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayB" ), LOC_COLOR( 11 ),
+                                                        3 ) );
+    m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayC" ), LOC_COLOR( 12 ),
+                                                        12 ) );
+    m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayD" ), LOC_COLOR( 13 ),
+                                                        13 ) );
+    m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayE" ), LOC_COLOR( 14 ),
+                                                        14 ) );
+    m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayF" ), LOC_COLOR( 15 ),
+                                                        RED ) );
+    m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayG" ), LOC_COLOR( 16 ),
+                                                        1 ) );
+    m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayH" ), LOC_COLOR( 17 ),
+                                                        5 ) );
+    m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayI" ), LOC_COLOR( 18 ),
+                                                        11 ) );
+    m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayJ" ), LOC_COLOR( 19 ),
+                                                        4 ) );
+    m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayK" ), LOC_COLOR( 20 ),
+                                                        5 ) );
+    m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayL" ), LOC_COLOR( 21 ),
+                                                        3 ) );
+    m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayM" ), LOC_COLOR( 22 ),
+                                                        6 ) );
+    m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayN" ), LOC_COLOR( 23 ),
+                                                        5 ) );
+    m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayO" ), LOC_COLOR( 24 ),
+                                                        LIGHTGRAY ) );
+    m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayP" ), LOC_COLOR( 25 ),
+                                                        1 ) );
+    m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayQ" ), LOC_COLOR( 26 ),
+                                                        2 ) );
+    m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayR" ), LOC_COLOR( 27 ),
+                                                        14 ) );
+    m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayS" ), LOC_COLOR( 28 ),
+                                                        YELLOW ) );
+    m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayT" ), LOC_COLOR( 29 ),
+                                                        13 ) );
+    m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayU" ), LOC_COLOR( 30 ),
+                                                        14 ) );
+    m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayV" ), LOC_COLOR( 31 ),
+                                                        7 ) );
+    m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "CTxtMoC" ),
+                                                        ITEM_COLOR( MOD_TEXT_FR_VISIBLE ),
+                                                        LIGHTGRAY ) );
+    m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "CTxtMoS" ),
+                                                        ITEM_COLOR( MOD_TEXT_BK_VISIBLE ),
+                                                        BLUE ) );
+    m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "CTxtVis" ),
+                                                        ITEM_COLOR( MOD_TEXT_INVISIBLE ),
+                                                        DARKGRAY ) );
+    m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "CAncreM" ),
+                                                        ITEM_COLOR( ANCHOR_VISIBLE ), BLUE ) );
+    m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "CoPadCu" ),
+                                                        ITEM_COLOR( PAD_BK_VISIBLE ), GREEN ) );
+    m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "CoPadCm" ),
+                                                        ITEM_COLOR( PAD_FR_VISIBLE ), RED ) );
+    m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "CoViaTh" ),
+                                                        ITEM_COLOR( VIA_THROUGH_VISIBLE ),
+                                                        LIGHTGRAY ) );
+    m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "CoViaBu" ),
+                                                        ITEM_COLOR( VIA_BBLIND_VISIBLE ),
+                                                        BROWN ) );
+    m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "CoViaMi" ),
+                                                        ITEM_COLOR( VIA_MICROVIA_VISIBLE ),
+                                                        CYAN ) );
+    m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "CoRatsN" ),
+                                                        ITEM_COLOR( RATSNEST_VISIBLE ),
+                                                        WHITE ) );
+    m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "HPGLnum" ),
+                                                   &g_pcb_plot_options.HPGL_Pen_Num,
+                                                   1, 1, 16 ) );
+    m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "HPGdiam" ),
+                                                   &g_pcb_plot_options.HPGL_Pen_Diam,
+                                                   15, 0, 100 ) );
+    m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "HPGLSpd" ),
+                                                   &g_pcb_plot_options.HPGL_Pen_Speed,
+                                                   20, 0, 1000 ) );
+    m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "HPGLrec" ),
+                                                   &g_pcb_plot_options.HPGL_Pen_Recouvrement,
+                                                   2, 0, 0x100 ) );
+    m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "TimeOut" ), &g_TimeOut,
+                                                   600, 0, 60000 ) );
+    m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "DPolair" ),
+                                                    &DisplayOpt.DisplayPolarCood, FALSE ) );
+    m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "MaxLnkS" ), &g_MaxLinksShowed,
+                                                   3, 0, 15 ) );
+    m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "ShowMRa" ),
+                                                    &g_Show_Module_Ratsnest, TRUE ) );
+    m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "TwoSegT" ),
+                                                    &g_TwoSegmentTrackBuild, TRUE ) );
+
+    return m_configSettings;
 }

pcbnew/pcbnew_config.h

-/*****************************************************/
-/** pcbcfg.h : configuration parameters for PCBNew  **/
-/*****************************************************/
+/************************************************************/
+/** pcbnew_config.h : configuration parameters for PCBNew  **/
+/************************************************************/
 
 #include "param_config.h"
 #include "colors_selection.h"
@@ -9,800 +9,9 @@
 #define GROUPLIB    wxT( "/pcbnew/libraries" )
 #define GROUPCOMMON wxT( "/common" )
 
-// Flag for member .m_Setup
-// .m_Setup = TRUE: write info in user config
-//      (i.e. for all project, in registry base or equivalent)
-// .m_Setup = FALSE: write info in project config (i.e. only for this
-//  project, in .pro file)
-#define INSETUP TRUE
-
 /* Useful macro : */
 #define LOC_COLOR(layer) &g_ColorsSettings.m_LayersColors[layer]
 #define ITEM_COLOR(item_visible) &g_ColorsSettings.m_ItemsColors[item_visible]
 
 /* Configuration parameters. */
 extern BOARD_DESIGN_SETTINGS boardDesignSettings;
-
-static PARAM_CFG_WXSTRING UserLibDirBufCfg
-(
-    wxT( "LibDir" ),
-    &g_UserLibDirBuffer,
-    GROUPLIB
-);
-
-static PARAM_CFG_LIBNAME_LIST LibNameBufCfg
-(
-    wxT( "LibName" ),
-    &g_LibName_List,
-    GROUPLIB
-);
-
-static PARAM_CFG_INT PadDrillCfg
-(
-    wxT( "PadDrlX" ),
-    &g_Pad_Master.m_Drill.x,
-    320,
-    0, 0x7FFF
-);
-
-static PARAM_CFG_INT PadDimHCfg     //Pad Diameter / H Size
-(
-    wxT( "PadDimH" ),
-    &g_Pad_Master.m_Size.x,
-    550,
-    0, 0x7FFF
-);
-
-static PARAM_CFG_INT PadDimVCfg
-(
-    wxT( "PadDimV" ),
-    &g_Pad_Master.m_Size.y,
-    550,
-    0, 0x7FFF
-);
-
-
-static PARAM_CFG_INT BoardThicknessCfg
-(
-    wxT( "BoardThickness" ),
-    &boardDesignSettings.m_BoardThickness,
-    630,
-    0, 0xFFFF
-);
-
-static PARAM_CFG_INT ViaShowHoleCfg
-(
-    INSETUP,
-    wxT( "ViaSHole" ),
-    &DisplayOpt.m_DisplayViaMode,
-    VIA_SPECIAL_HOLE_SHOW,
-    VIA_HOLE_NOT_SHOW,
-    OPT_VIA_HOLE_END - 1
-);
-
-static PARAM_CFG_INT ShowNetNamesModeCfg
-(
-    INSETUP,
-    wxT( "ShowNetNamesMode" ),
-    &DisplayOpt.DisplayNetNamesMode,
-    3,
-    0,
-    3
-);
-
-static PARAM_CFG_INT RouteLayTopCfg     // First current working layer
-(
-    wxT( "RouteTo" ),
-    &Route_Layer_TOP,
-    15,
-    0, 15
-);
-
-static PARAM_CFG_INT RouteLayBotCfg     // second current working layer
-(
-    wxT( "RouteBo" ),
-    &Route_Layer_BOTTOM,
-    0,
-    0, 15
-);
-
-static PARAM_CFG_BOOL Segm45Cfg     // 0, 90, and 45 degrees are the only
-(                                   // valid segment orientations.
-    wxT( "Segm45" ),
-    &Track_45_Only,
-    TRUE
-);
-
-static PARAM_CFG_BOOL Raccord45Cfg  // Generate connections at 45 degrees
-(                                   // only.
-    wxT( "Racc45" ),
-    &g_Raccord_45_Auto,
-    TRUE
-);
-
-static PARAM_CFG_INT UnitCfg        // Units: 0 inch, 1 mm
-(
-    INSETUP,
-    wxT( "Unite" ),
-    &g_UnitMetric,
-    FALSE
-);
-
-static PARAM_CFG_BOOL SegmFillCfg
-(
-    INSETUP,
-    wxT( "SegFill" ),
-    &DisplayOpt.DisplayPcbTrackFill,
-    TRUE
-);
-
-
-static PARAM_CFG_INT TrackDisplayClearanceCfg
-(
-    INSETUP,
-    wxT( "TrackDisplayClearance" ),
-    &DisplayOpt.ShowTrackClearanceMode,
-    SHOW_CLEARANCE_NEW_TRACKS_AND_VIA_AREAS
-);
-
-static PARAM_CFG_BOOL PadFillCfg
-(
-    INSETUP,
-    wxT( "PadFill" ),
-    &DisplayOpt.DisplayPadFill,
-    TRUE
-);
-
-static PARAM_CFG_BOOL ViaFillCfg
-(
-    INSETUP,
-    wxT( "ViaFill" ),
-    &DisplayOpt.DisplayViaFill,
-    TRUE
-);
-
-static PARAM_CFG_BOOL PadAfficheGardeCfg
-(
-    INSETUP,
-    wxT( "PadAffG" ),
-    &DisplayOpt.DisplayPadIsol,
-    TRUE
-);
-
-static PARAM_CFG_BOOL PadShowNumCfg
-(
-    INSETUP,
-    wxT( "PadSNum" ),
-    &DisplayOpt.DisplayPadNum,
-    TRUE
-);
-
-static PARAM_CFG_INT AfficheContourModuleCfg    // Module Edges: fill/line/sketch
-(
-    INSETUP,
-    wxT( "ModAffC" ),
-    &DisplayOpt.DisplayModEdge,
-    FILLED,
-    0, 2
-);
-
-static PARAM_CFG_INT AfficheTexteModuleCfg  // Module Texts: fill/line/sketch
-(
-    INSETUP,
-    wxT( "ModAffT" ),
-    &DisplayOpt.DisplayModText,
-    FILLED,
-    0, 2
-);
-
-static PARAM_CFG_INT AffichePcbTextCfg     // PCB Texts: fill/line/sketch
-(
-    INSETUP,
-    wxT( "PcbAffT" ),
-    &DisplayOpt.DisplayDrawItems,
-    FILLED,
-    0, 2
-);
-
-static PARAM_CFG_BOOL SegmPcb45Cfg  // Force 45 degrees for segments
-(
-    wxT( "SgPcb45" ),
-    &Segments_45_Only,
-    TRUE
-);
-
-static PARAM_CFG_INT PcbTextDimVCfg
-(
-    wxT( "TxtPcbV" ),
-    &boardDesignSettings.m_PcbTextSize.y,
-    600,
-    TEXTS_MIN_SIZE, TEXTS_MAX_SIZE
-);
-
-static PARAM_CFG_INT PcbTextDimHCfg
-(
-    wxT( "TxtPcbH" ),
-    &boardDesignSettings.m_PcbTextSize.x,
-    600,
-    TEXTS_MIN_SIZE, TEXTS_MAX_SIZE
-);
-
-static PARAM_CFG_SETCOLOR ColorLayer0Cfg   // CU Layer Color
-(
-    INSETUP,
-    wxT( "ColLay0" ),
-    LOC_COLOR(0),
-    GREEN
-);
-
-static PARAM_CFG_SETCOLOR ColorLayer1Cfg
-(
-    INSETUP,
-    wxT( "ColLay1" ),
-    LOC_COLOR(1),
-    BLUE
-);
-
-static PARAM_CFG_SETCOLOR ColorLayer2Cfg
-(
-    INSETUP,
-    wxT( "ColLay2" ),
-    LOC_COLOR(2),
-    LIGHTGRAY
-);
-
-static PARAM_CFG_SETCOLOR ColorLayer3Cfg
-(
-    INSETUP,
-    wxT( "ColLay3" ),
-    LOC_COLOR(3),
-    5
-);
-
-static PARAM_CFG_SETCOLOR ColorLayer4Cfg
-(
-    INSETUP,
-    wxT( "ColLay4" ),
-    LOC_COLOR(4),
-    4
-);
-
-static PARAM_CFG_SETCOLOR ColorLayer5Cfg
-(
-    INSETUP,
-    wxT( "ColLay5" ),
-    LOC_COLOR(5),
-    5
-);
-
-static PARAM_CFG_SETCOLOR ColorLayer6Cfg
-(
-    INSETUP,
-    wxT( "ColLay6" ),
-    LOC_COLOR(6),
-    6
-);
-
-static PARAM_CFG_SETCOLOR ColorLayer7Cfg
-(
-    INSETUP,
-    wxT( "ColLay7" ),
-    LOC_COLOR(7),
-    5
-);
-
-static PARAM_CFG_SETCOLOR ColorLayer8Cfg
-(
-    INSETUP,
-    wxT( "ColLay8" ),
-    LOC_COLOR(8),
-    7
-);
-
-static PARAM_CFG_SETCOLOR ColorLayer9Cfg
-(
-    INSETUP,
-    wxT( "ColLay9" ),
-    LOC_COLOR(9),
-    1
-);
-
-static PARAM_CFG_SETCOLOR ColorLayer10Cfg
-(
-    INSETUP,
-    wxT( "ColLayA" ),
-    LOC_COLOR(10),
-    2
-);
-
-static PARAM_CFG_SETCOLOR ColorLayer11Cfg
-(
-    INSETUP,
-    wxT( "ColLayB" ),
-    LOC_COLOR(11),
-    3
-);
-
-static PARAM_CFG_SETCOLOR ColorLayer12Cfg
-(
-    INSETUP,
-    wxT( "ColLayC" ),
-    LOC_COLOR(12),
-    12
-);
-
-static PARAM_CFG_SETCOLOR ColorLayer13Cfg
-(
-    INSETUP,
-    wxT( "ColLayD" ),
-    LOC_COLOR(13),
-    13
-);
-
-static PARAM_CFG_SETCOLOR ColorLayer14Cfg
-(
-    INSETUP,
-    wxT( "ColLayE" ),
-    LOC_COLOR(14),
-    14
-);
-
-static PARAM_CFG_SETCOLOR ColorLayer15Cfg  // CMP Layer Color
-(
-    INSETUP,
-    wxT( "ColLayF" ),
-    LOC_COLOR(15),
-    RED
-);
-
-static PARAM_CFG_SETCOLOR ColorLayer16Cfg  // Adhesive CU Layer Color
-(
-    INSETUP,
-    wxT( "ColLayG" ),
-    LOC_COLOR(16),
-    1
-);
-
-static PARAM_CFG_SETCOLOR ColorLayer17Cfg  // Adhesive CMP Layer Color
-(
-    INSETUP,
-    wxT( "ColLayH" ),
-    LOC_COLOR(17),
-    5
-);
-
-static PARAM_CFG_SETCOLOR ColorLayer18Cfg  // Solder Mask CU Layer Color
-(
-    INSETUP,
-    wxT( "ColLayI" ),
-    LOC_COLOR(18),
-    11
-);
-
-static PARAM_CFG_SETCOLOR ColorLayer19Cfg  // Solder Mask CMP Layer Color
-(
-    INSETUP,
-    wxT( "ColLayJ" ),
-    LOC_COLOR(19),
-    4
-);
-
-static PARAM_CFG_SETCOLOR ColorLayer20Cfg  // Silk Screen CU Layer Color
-(
-    INSETUP,
-    wxT( "ColLayK" ),
-    LOC_COLOR(20),
-    5
-);
-
-static PARAM_CFG_SETCOLOR ColorLayer21Cfg  // Silk Screen CMP Layer Color
-(
-    INSETUP,
-    wxT( "ColLayL" ),
-    LOC_COLOR(21),
-    3
-);
-
-static PARAM_CFG_SETCOLOR ColorLayer22Cfg  // Mask CU Layer Color
-(
-    INSETUP,
-    wxT( "ColLayM" ),
-    LOC_COLOR(22),
-    6
-);
-
-static PARAM_CFG_SETCOLOR ColorLayer23Cfg  // Mask CMP Layer Color
-(
-    INSETUP,
-    wxT( "ColLayN" ),
-    LOC_COLOR(23),
-    5
-);
-
-static PARAM_CFG_SETCOLOR ColorLayer24Cfg  // DRAW Layer Color
-(
-    INSETUP,
-    wxT( "ColLayO" ),
-    LOC_COLOR(24),
-    LIGHTGRAY
-);
-
-static PARAM_CFG_SETCOLOR ColorLayer25Cfg  // Comment Layer Color
-(
-    INSETUP,
-    wxT( "ColLayP" ),
-    LOC_COLOR(25),
-    1
-);
-
-static PARAM_CFG_SETCOLOR ColorLayer26Cfg  // ECO1 Layer Color
-(
-    INSETUP,
-    wxT( "ColLayQ" ),
-    LOC_COLOR(26),
-    2
-);
-
-static PARAM_CFG_SETCOLOR ColorLayer27Cfg  //ECO2 Layer Color
-(
-    INSETUP,
-    wxT( "ColLayR" ),
-    LOC_COLOR(27),
-    14
-);
-
-static PARAM_CFG_SETCOLOR ColorLayer28Cfg  // EDGES Layer Color
-(
-    INSETUP,
-    wxT( "ColLayS" ),
-    LOC_COLOR(28),
-    YELLOW
-);
-
-static PARAM_CFG_SETCOLOR ColorLayer29Cfg
-(
-    INSETUP,
-    wxT( "ColLayT" ),
-    LOC_COLOR(29),
-    13
-);
-
-static PARAM_CFG_SETCOLOR ColorLayer30Cfg
-(
-    INSETUP,
-    wxT( "ColLayU" ),
-    LOC_COLOR(30),
-    14
-);
-
-static PARAM_CFG_SETCOLOR ColorLayer31Cfg
-(
-    INSETUP,
-    wxT( "ColLayV" ),
-    LOC_COLOR(31),
-    7
-);
-
-static PARAM_CFG_SETCOLOR ColorTxtModCmpCfg
-(
-    INSETUP,
-    wxT( "CTxtMoC" ),
-    ITEM_COLOR(MOD_TEXT_FR_VISIBLE),
-    LIGHTGRAY
-);
-
-static PARAM_CFG_SETCOLOR ColorTxtModCuCfg
-(
-    INSETUP,
-    wxT( "CTxtMoS" ),
-    ITEM_COLOR(MOD_TEXT_BK_VISIBLE),
-    BLUE
-);
-
-static PARAM_CFG_SETCOLOR VisibleTxtModCfg
-(
-    INSETUP,
-    wxT( "CTxtVis" ),
-    ITEM_COLOR(MOD_TEXT_INVISIBLE),
-    DARKGRAY
-);
-
-static PARAM_CFG_INT TexteModDimVCfg
-(
-    wxT( "TxtModV" ),
-    &ModuleTextSize.y,
-    500,
-    TEXTS_MIN_SIZE, TEXTS_MAX_SIZE
-);
-
-static PARAM_CFG_INT TexteModDimHCfg
-(
-    wxT( "TxtModH" ),
-    &ModuleTextSize.x,
-    500,
-    TEXTS_MIN_SIZE, TEXTS_MAX_SIZE
-);
-
-static PARAM_CFG_INT TexteModWidthCfg
-(
-    wxT( "TxtModW" ),
-    &ModuleTextWidth,
-    100,
-    1, TEXTS_MAX_WIDTH
-);
-
-static PARAM_CFG_SETCOLOR ColorAncreModCfg
-(
-    INSETUP,
-    wxT( "CAncreM" ),
-    ITEM_COLOR(ANCHOR_VISIBLE),
-    BLUE
-);
-
-static PARAM_CFG_SETCOLOR ColorPadCuCfg
-(
-    INSETUP,
-    wxT( "CoPadCu" ),
-    ITEM_COLOR(PAD_BK_VISIBLE),
-    GREEN
-);
-
-static PARAM_CFG_SETCOLOR ColorPadCmpCfg
-(
-    INSETUP,
-    wxT( "CoPadCm" ),
-    ITEM_COLOR(PAD_FR_VISIBLE),
-    RED
-);
-
-static PARAM_CFG_SETCOLOR ColorViaThroughCfg
-(
-    INSETUP,
-    wxT( "CoViaTh" ),
-    ITEM_COLOR(VIA_THROUGH_VISIBLE),
-    LIGHTGRAY
-);
-
-static PARAM_CFG_SETCOLOR ColorViaBlindBuriedCfg
-(
-    INSETUP,
-    wxT( "CoViaBu" ),
-    ITEM_COLOR(VIA_BBLIND_VISIBLE),
-    BROWN
-);
-
-static PARAM_CFG_SETCOLOR ColorViaMicroViaCfg  // Buried Via Color
-(
-    INSETUP,
-    wxT( "CoViaMi" ),
-    ITEM_COLOR(VIA_MICROVIA_VISIBLE),
-    CYAN
-);
-
-static PARAM_CFG_SETCOLOR ColorCheveluCfg
-(
-    INSETUP,
-    wxT( "CoRatsN" ),
-    ITEM_COLOR(RATSNEST_VISIBLE),
-    WHITE
-);
-
-static PARAM_CFG_INT HPGLpenNumCfg
-(
-    INSETUP,
-    wxT( "HPGLnum" ),
-    &g_pcb_plot_options.HPGL_Pen_Num,
-    1,
-    1, 16
-);
-
-static PARAM_CFG_INT HPGLdiamCfg    // HPGL pen size (mils)
-(
-    INSETUP,
-    wxT( "HPGdiam" ),
-    &g_pcb_plot_options.HPGL_Pen_Diam,
-    15,
-    0, 100
-);
-
-static PARAM_CFG_INT HPGLspeedCfg   //HPGL pen speed (cm/s)
-(
-    INSETUP,
-    wxT( "HPGLSpd" ),
-    &g_pcb_plot_options.HPGL_Pen_Speed,
-    20,
-    0, 1000
-);
-
-static PARAM_CFG_INT HPGLrecouvrementCfg
-(
-    INSETUP,
-    wxT( "HPGLrec" ),
-    &g_pcb_plot_options.HPGL_Pen_Recouvrement,
-    2,
-    0, 0x100
-);
-
-static PARAM_CFG_INT VernisEpargneGardeCfg
-(
-    wxT( "VEgarde" ),
-    &boardDesignSettings.m_SolderMaskMargin,
-    100,
-    0, 10000
-);
-
-static PARAM_CFG_INT DrawSegmLargeurCfg
-(
-    wxT( "DrawLar" ),
-    &boardDesignSettings.m_DrawSegmentWidth,
-    120,
-    0, 0xFFFF
-);
-
-static PARAM_CFG_INT EdgeSegmLargeurCfg
-(
-    wxT( "EdgeLar" ),
-    &boardDesignSettings.m_EdgeSegmentWidth,
-    120,
-    0, 0xFFFF
-);
-
-static PARAM_CFG_INT TexteSegmLargeurCfg
-(
-    wxT( "TxtLar" ),
-    &boardDesignSettings.m_PcbTextWidth,
-    120,
-    0, 0xFFFF
-);
-
-static PARAM_CFG_INT ModuleSegmWidthCfg
-(
-    wxT( "MSegLar" ),
-    &ModuleSegmentWidth,
-    120,
-    0, 0xFFFF
-);
-
-static PARAM_CFG_INT WTraitSerigraphiePlotCfg
-(
-    wxT( "WpenSer" ),
-    &g_pcb_plot_options.PlotLine_Width,
-    10,
-    1, 10000
-);
-
-static PARAM_CFG_INT TimeOutCfg     // Automatic backup duration time in
-(                                   // seconds.
-    INSETUP,
-    wxT( "TimeOut" ),
-    &g_TimeOut,
-    600,
-    0, 60000
-);
-
-static PARAM_CFG_BOOL DisplPolairCfg
-(
-    INSETUP,
-    wxT( "DPolair" ),
-    &DisplayOpt.DisplayPolarCood,
-    FALSE
-);
-
-static PARAM_CFG_INT PrmMaxLinksShowed
-(
-    INSETUP,
-    wxT( "MaxLnkS" ),
-    &g_MaxLinksShowed,
-    3,
-    0, 15
-);
-
-static PARAM_CFG_BOOL ShowModuleRatsnestCfg
-(
-    INSETUP,
-    wxT( "ShowMRa" ),
-    &g_Show_Module_Ratsnest,
-    TRUE
-);
-
-static PARAM_CFG_BOOL TwoSegmentTrackBuildCfg
-(
-    INSETUP,
-    wxT( "TwoSegT" ),
-    &g_TwoSegmentTrackBuild,
-    TRUE
-);
-
-
-/* parameters in this list will be saved on request (when saving config).
- */
-PARAM_CFG_BASE* ParamCfgList[] =
-{
-    &UserLibDirBufCfg,
-    &LibNameBufCfg,
-    &PadDrillCfg,
-    &PadDimHCfg,
-    &PadDimVCfg,
-    &ViaShowHoleCfg,
-    &ShowNetNamesModeCfg,
-    &BoardThicknessCfg,
-    &RouteLayTopCfg,
-    &RouteLayBotCfg,
-    &Segm45Cfg,
-    &Raccord45Cfg,
-    &UnitCfg,
-    &SegmFillCfg,
-    &TrackDisplayClearanceCfg,
-    &PadFillCfg,
-    &ViaFillCfg,
-    &PadAfficheGardeCfg,
-    &PadShowNumCfg,
-    &AfficheContourModuleCfg,
-    &AfficheTexteModuleCfg,
-    &AffichePcbTextCfg,
-    &SegmPcb45Cfg,
-    &PcbTextDimVCfg,
-    &PcbTextDimHCfg,
-    &ColorLayer0Cfg,
-    &ColorLayer1Cfg,
-    &ColorLayer2Cfg,
-    &ColorLayer3Cfg,
-    &ColorLayer4Cfg,
-    &ColorLayer5Cfg,
-    &ColorLayer6Cfg,
-    &ColorLayer7Cfg,
-    &ColorLayer8Cfg,
-    &ColorLayer9Cfg,
-    &ColorLayer10Cfg,
-    &ColorLayer11Cfg,
-    &ColorLayer12Cfg,
-    &ColorLayer13Cfg,
-    &ColorLayer14Cfg,
-    &ColorLayer15Cfg,
-    &ColorLayer16Cfg,
-    &ColorLayer17Cfg,
-    &ColorLayer18Cfg,
-    &ColorLayer19Cfg,
-    &ColorLayer20Cfg,
-    &ColorLayer21Cfg,
-    &ColorLayer22Cfg,
-    &ColorLayer23Cfg,
-    &ColorLayer24Cfg,
-    &ColorLayer25Cfg,
-    &ColorLayer26Cfg,
-    &ColorLayer27Cfg,
-    &ColorLayer28Cfg,
-    &ColorLayer29Cfg,
-    &ColorLayer30Cfg,
-    &ColorLayer31Cfg,
-    &ColorTxtModCmpCfg,
-    &ColorTxtModCuCfg,
-    &VisibleTxtModCfg,
-    &TexteModDimVCfg,
-    &TexteModDimHCfg,
-    &TexteModWidthCfg,
-    &ColorAncreModCfg,
-    &ColorPadCuCfg,
-    &ColorPadCmpCfg,
-    &ColorViaThroughCfg,
-    &ColorViaBlindBuriedCfg,
-    &ColorViaMicroViaCfg,
-    &ColorCheveluCfg,
-    &HPGLpenNumCfg,
-    &HPGLdiamCfg,
-    &HPGLspeedCfg,
-    &HPGLrecouvrementCfg,
-    &VernisEpargneGardeCfg,
-    &DrawSegmLargeurCfg,
-    &EdgeSegmLargeurCfg,
-    &TexteSegmLargeurCfg,
-    &ModuleSegmWidthCfg,
-    &WTraitSerigraphiePlotCfg,
-    &TimeOutCfg,
-    &DisplPolairCfg,
-    &PrmMaxLinksShowed,
-    &ShowModuleRatsnestCfg,
-    &TwoSegmentTrackBuildCfg,
-
-    NULL
-};

pcbnew/tool_onrightclick.cpp

@@ -38,7 +38,7 @@ void WinEDA_PcbFrame::ToolOnRightClick( wxCommandEvent& event )
     case ID_PCB_ADD_LINE_BUTT:
     case ID_PCB_DIMENSION_BUTT:
     case ID_PCB_ADD_TEXT_BUTT:
-        InstallPcbOptionsFrame( ID_PCB_DRAWINGS_WIDTHS_SETUP );
+        OnConfigurePcbOptions( event );
         break;
 
     default: