Commit bc71a2c0 authored by Maciej Suminski's avatar Maciej Suminski

Removed TOOL_STATE.idle field, as it was redundant.

parent 7784365b
...@@ -127,7 +127,6 @@ void TOOL_MANAGER::RegisterTool( TOOL_BASE* aTool ) ...@@ -127,7 +127,6 @@ void TOOL_MANAGER::RegisterTool( TOOL_BASE* aTool )
TOOL_STATE* st = new TOOL_STATE; TOOL_STATE* st = new TOOL_STATE;
st->theTool = aTool; st->theTool = aTool;
st->idle = true;
st->pendingWait = false; st->pendingWait = false;
st->pendingContextMenu = false; st->pendingContextMenu = false;
st->cofunc = NULL; st->cofunc = NULL;
...@@ -240,14 +239,10 @@ bool TOOL_MANAGER::runTool( TOOL_BASE* aTool ) ...@@ -240,14 +239,10 @@ bool TOOL_MANAGER::runTool( TOOL_BASE* aTool )
return false; return false;
} }
TOOL_STATE* state = m_toolState[aTool];
// If the tool is already active, do not invoke it again // If the tool is already active, do not invoke it again
if( state->idle == false ) if( isActive( aTool ) )
return false; return false;
state->idle = false;
aTool->Reset( TOOL_INTERACTIVE::RUN ); aTool->Reset( TOOL_INTERACTIVE::RUN );
// Add the tool on the front of the processing queue (it gets events first) // Add the tool on the front of the processing queue (it gets events first)
...@@ -417,19 +412,18 @@ bool TOOL_MANAGER::dispatchActivation( TOOL_EVENT& aEvent ) ...@@ -417,19 +412,18 @@ bool TOOL_MANAGER::dispatchActivation( TOOL_EVENT& aEvent )
void TOOL_MANAGER::finishTool( TOOL_STATE* aState ) void TOOL_MANAGER::finishTool( TOOL_STATE* aState )
{ {
// Find the tool to be deactivated std::deque<TOOL_ID>::iterator it, itEnd;
std::deque<TOOL_ID>::iterator it, it_end;
for( it = m_activeTools.begin(), it_end = m_activeTools.end(); it != it_end; ++it ) // Find the tool and deactivate it
for( it = m_activeTools.begin(), itEnd = m_activeTools.end(); it != itEnd; ++it )
{ {
if( aState == m_toolIdIndex[*it] ) if( aState == m_toolIdIndex[*it] )
{
m_activeTools.erase( it );
break; break;
} }
}
if( it != m_activeTools.end() )
m_activeTools.erase( it );
aState->idle = true;
delete aState->cofunc; delete aState->cofunc;
aState->cofunc = NULL; aState->cofunc = NULL;
} }
...@@ -525,5 +519,6 @@ bool TOOL_MANAGER::isActive( TOOL_BASE* aTool ) ...@@ -525,5 +519,6 @@ bool TOOL_MANAGER::isActive( TOOL_BASE* aTool )
if( !isRegistered( aTool ) ) if( !isRegistered( aTool ) )
return false; return false;
return !m_toolState[aTool]->idle; // Just check if the tool is on the active tools stack
return std::find( m_activeTools.begin(), m_activeTools.end(), aTool->GetId() ) != m_activeTools.end();
} }
/*
* This program source code file is part of KiCad, a free EDA CAD application.
*
* Copyright (C) 2013 CERN
* @author Maciej Suminski <maciej.suminski@cern.ch>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, you may find one here:
* http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
* or you may search the http://www.gnu.org website for the version 2 license,
* or you may write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
*/
#include <class_board.h>
#include <class_module.h>
#include <tool/tool_manager.h>
#include <view/view_controls.h>
#include <ratsnest_data.h>
#include <confirm.h>
#include <boost/foreach.hpp>
#include "common_actions.h"
#include "selection_tool.h"
#include "move_tool.h"
using namespace KIGFX;
using boost::optional;
MOVE_TOOL::MOVE_TOOL() :
TOOL_INTERACTIVE( "pcbnew.InteractiveMove" ), m_selectionTool( NULL )
{
}
void MOVE_TOOL::Reset()
{
// The tool launches upon reception of action event ("pcbnew.InteractiveMove")
Go( &MOVE_TOOL::Main, COMMON_ACTIONS::moveActivate.MakeEvent() );
}
bool MOVE_TOOL::Init()
{
// Find the selection tool, so they can cooperate
TOOL_BASE* selectionTool = m_toolMgr->FindTool( "pcbnew.InteractiveSelection" );
if( selectionTool )
{
m_selectionTool = static_cast<SELECTION_TOOL*>( selectionTool );
// Add context menu entries that are displayed when selection tool is active
m_selectionTool->AddMenuItem( COMMON_ACTIONS::moveActivate );
m_selectionTool->AddMenuItem( COMMON_ACTIONS::rotate );
m_selectionTool->AddMenuItem( COMMON_ACTIONS::flip );
}
else
{
DisplayError( NULL, wxT( "pcbnew.InteractiveSelection tool is not available" ) );
return false;
}
return true;
}
int MOVE_TOOL::Main( TOOL_EVENT& aEvent )
{
const SELECTION_TOOL::SELECTION& selection = m_selectionTool->GetSelection();
if( selection.Empty() )
return 0; // there are no items to operate on
VECTOR2D dragPosition;
bool dragging = false;
bool restore = false; // Should items' state be restored when finishing the tool?
VIEW_CONTROLS* controls = getViewControls();
controls->ShowCursor( true );
controls->SetSnapping( true );
controls->SetAutoPan( true );
// Main loop: keep receiving events
while( OPT_TOOL_EVENT evt = Wait() )
{
if( evt->IsCancel() )
{
restore = true; // Cancelling the tool means that items have to be restored
break; // Finish
}
// Dispatch TOOL_ACTIONs
else if( evt->Category() == TC_COMMAND )
{
VECTOR2D cursorPos = getView()->ToWorld( getViewControls()->GetCursorPosition() );
if( evt->IsAction( &COMMON_ACTIONS::rotate ) ) // got rotation event?
{
m_state.Rotate( cursorPos, 900.0 );
selection.group->ViewUpdate( VIEW_ITEM::GEOMETRY );
updateRatsnest( true );
}
else if( evt->IsAction( &COMMON_ACTIONS::flip ) ) // got flip event?
{
m_state.Flip( cursorPos );
selection.group->ViewUpdate( VIEW_ITEM::GEOMETRY );
updateRatsnest( true );
}
}
else if( evt->IsMotion() || evt->IsDrag( BUT_LEFT ) )
{
if( dragging )
{
// Drag items to the current cursor position
VECTOR2D movement = ( evt->Position() - dragPosition );
m_state.Move( movement );
updateRatsnest( true );
}
else
{
// Prepare to drag
std::set<BOARD_ITEM*>::iterator it;
for( it = selection.items.begin(); it != selection.items.end(); ++it )
{
// Save the state of the selected items, in case it has to be restored
m_state.Save( *it );
}
dragging = true;
}
selection.group->ViewUpdate( VIEW_ITEM::GEOMETRY );
dragPosition = evt->Position();
}
else if( evt->IsMouseUp( BUT_LEFT ) || evt->IsClick( BUT_LEFT ) )
break; // Finish
}
if( restore )
{
// Modifications has to be rollbacked, so restore the previous state of items
selection.group->ItemsViewUpdate( VIEW_ITEM::APPEARANCE );
m_state.RestoreAll();
updateRatsnest( false );
}
else
{
// Changes are applied, so update the items
selection.group->ItemsViewUpdate( m_state.GetUpdateFlag() );
m_state.Apply();
}
RN_DATA* ratsnest = static_cast<BOARD*>( m_toolMgr->GetModel() )->GetRatsnest();
ratsnest->Recalculate();
controls->ShowCursor( false );
controls->SetSnapping( false );
controls->SetAutoPan( false );
return 0;
}
void MOVE_TOOL::updateRatsnest( bool aRedraw )
{
const SELECTION_TOOL::SELECTION& selection = m_selectionTool->GetSelection();
RN_DATA* ratsnest = static_cast<BOARD*>( m_toolMgr->GetModel() )->GetRatsnest();
ratsnest->ClearSimple();
BOOST_FOREACH( BOARD_ITEM* item, selection.items )
{
if( item->Type() == PCB_PAD_T || item->Type() == PCB_TRACE_T ||
item->Type() == PCB_VIA_T || item->Type() == PCB_ZONE_AREA_T )
{
ratsnest->Update( static_cast<BOARD_CONNECTED_ITEM*>( item ) );
if( aRedraw )
ratsnest->AddSimple( static_cast<BOARD_CONNECTED_ITEM*>( item ) );
}
else if( item->Type() == PCB_MODULE_T )
{
ratsnest->Update( static_cast<MODULE*>( item ) );
if( aRedraw )
ratsnest->AddSimple( static_cast<MODULE*>( item ) );
}
}
}
/*
* This program source code file is part of KiCad, a free EDA CAD application.
*
* Copyright (C) 2013 CERN
* @author Maciej Suminski <maciej.suminski@cern.ch>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, you may find one here:
* http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
* or you may search the http://www.gnu.org website for the version 2 license,
* or you may write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
*/
#ifndef __MOVE_TOOL_H
#define __MOVE_TOOL_H
#include <math/vector2d.h>
#include <tool/tool_interactive.h>
#include <view/view_group.h>
#include "item_state.h"
class BOARD_ITEM;
class SELECTION_TOOL;
namespace KIGFX
{
class VIEW_GROUP;
}
/**
* Class MOVE_TOOL
*
* Our sample move tool. Allows to move, rotate and flip items selected by
* pcbnew.InteractiveSelection tool.
*/
class MOVE_TOOL : public TOOL_INTERACTIVE
{
public:
MOVE_TOOL();
/// @copydoc TOOL_INTERACTIVE::Reset()
void Reset();
/// @copydoc TOOL_INTERACTIVE::Init()
bool Init();
/**
* Function Main()
*
* Main loop in which events are handled.
*/
int Main( TOOL_EVENT& aEvent );
private:
void updateRatsnest( bool aRedraw );
/// Saves the state of items and allows to restore them
ITEM_STATE m_state;
/// Selection tool used for obtaining selected items
SELECTION_TOOL* m_selectionTool;
};
#endif
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment