Commit b9f9d539 authored by dickelbeck's avatar dickelbeck

more amazing free specctra software

parent 4a0b5607
......@@ -5,6 +5,21 @@ Started 2007-June-11
Please add newer entries at the top, list the date and your name with
email address.
2008-Jan-29 UPDATE Dick Hollenbeck <dick@softplc.com>
================================================================================
+pcbnew:
SPECCTRA export now exports pads with offset OK, exports oval pads OK,
and tries to do less with pcb edges that are not a connected set of lines,
putting the burden back on the PCBNEW user to have clean perimeter lines.
Discovered that freerouter does not support oval pads yet, asked
for enhancement. Discovered a small problem if you modify a PAD in
the MODULE editor but do not replicate that change throughout all module
instances in the board. Is on my @todo list. Otherwise it is getting pretty
good now. Most boards load into freerouter, except mine, which if exported
with part numbers, hangs the freerouter! I may be away for a few days doing
billable work, after which I will begin the 2 imports, *.dsn and *.ses.
2008-Jan-31 UPDATE Jean-Pierre Charras <jean-pierre.charras@inpg.fr>
================================================================================
+pcbnew:
......
......@@ -42,7 +42,7 @@
Wide use is made of boost::ptr_vector<> and std::vector<> template classes.
If the contained object is small, then std::vector tends to be used.
If the contained object is large, variable size, or would require writing
an assignment operator() or copy constructore, then boost::ptr_vector
an assignment operator() or copy constructor, then boost::ptr_vector
cannot be beat.
*/
......
......@@ -695,19 +695,19 @@ public:
const char* quote = out->GetQuoteChar( layer_id.c_str() );
const int RIGHTMARGIN = 80;
const int RIGHTMARGIN = 70;
int perLine = out->Print( nestLevel, "(%s %s%s%s %.6g",
LEXER::GetTokenText( Type() ),
quote, layer_id.c_str(), quote,
aperture_width );
int wrapNest = MAX( nestLevel+1, 6 );
for( unsigned i=0; i<points.size(); ++i )
{
if( perLine > RIGHTMARGIN )
{
out->Print( 0, "\n" );
perLine = out->Print( nestLevel+1, "%s", "" );
newline = "\n";
perLine = out->Print( wrapNest, "%s", "" );
}
else
perLine += out->Print( 0, " " );
......@@ -717,10 +717,9 @@ public:
if( aperture_type == T_square )
{
out->Print( 0, "\n" );
out->Print( nestLevel+1, "(aperture_type square))\n" );
out->Print( 0, "(aperture_type square)" );
}
else
out->Print( 0, ")%s", newline );
}
};
......
......@@ -74,6 +74,9 @@ void WinEDA_PcbFrame::ExportToSPECCTRA( wxCommandEvent& event )
bool ok = true;
wxString errorText;
BASE_SCREEN* screen = GetScreen();
bool wasModified = screen->IsModify() && !screen->IsSave();
db.SetPCB( SPECCTRA_DB::MakePCB() );
try
......@@ -92,6 +95,12 @@ void WinEDA_PcbFrame::ExportToSPECCTRA( wxCommandEvent& event )
errorText = ioe.errorText;
}
// The two calls below to BOARD::Change_Side_Module(), both set the
// modified flag, yet their actions cancel each other out, so it should
// be ok to clear the modify flag.
if( !wasModified )
screen->ClrModify();
if( ok )
{
// @todo display a message saying the export is complete.
......@@ -105,8 +114,8 @@ namespace DSN {
struct POINT_PAIR
{
POINT p1; ///< start
POINT p2; ///< end
POINT start;
POINT end;
BOARD_ITEM* item; ///< the item which has these points, TRACK or DRAWSEGMENT
};
typedef std::vector<POINT_PAIR> POINT_PAIRS;
......@@ -114,9 +123,9 @@ typedef std::vector<POINT_PAIR> POINT_PAIRS;
static inline void swap( POINT_PAIR& pair )
{
POINT temp = pair.p1;
pair.p1 = pair.p2;
pair.p2 = temp;
POINT temp = pair.start;
pair.start = pair.end;
pair.end = temp;
}
......@@ -157,6 +166,31 @@ static POINT mapPt( const wxPoint& pt )
}
/**
* Function findPOINT
* searches the list of POINT_PAIRS for a matching end to the given POINT.
* @return int - 0 if no match, or + one based index of a POINT_PAIR with a matching ".start",
* or a - one based index of a POINT_PAIR with a matching ".end".
*/
static int findPOINT( const POINT& pt, const POINT_PAIR source[], int count )
{
for( int i=0; i<count; ++i )
{
if( pt == source[i].start )
{
return +( i + 1 );
}
if( pt == source[i].end )
{
return -( i + 1 );
}
}
return 0;
}
/**
* Function swapEnds
* will swap ends of any POINT_PAIR in the POINT_PAIRS list in order to
......@@ -164,23 +198,46 @@ static POINT mapPt( const wxPoint& pt )
*/
static void swapEnds( POINT_PAIRS& aList )
{
POINT temp;
if( aList.size() <= 1 )
if( !aList.size() )
return;
for( unsigned i=0; i<aList.size(); ++i )
// do an extraction sort based on matching ends here.
POINT_PAIRS sorted;
POINT_PAIRS source( aList );
// try and start the search using a POINT which has at least one match elsewhere.
if( findPOINT( source.begin()->start, &source[1], source.size()-1 ) != 0 )
swap( *source.begin() ); // swap start and end of first PAIR
while( source.size() )
{
if( aList[i].p1 == aList[i+1].p1 )
swap( aList[i] );
sorted.push_back( *source.begin() );
source.erase( source.begin() );
else if( aList[i].p1 == aList[i+1].p2 )
// keep looping through the source list looking for a match to the end of the last sorted.
int result;
while( (result = findPOINT( sorted.back().end, &source[0], source.size() ) ) != 0 )
{
swap( aList[i] );
swap( aList[i+1] );
++i; // skip next one, we swapped i+1 here
int ndx = ABS(result)-1;
sorted.push_back( source[ ndx ] );
source.erase( source.begin()+ndx );
if( result < 0 )
swap( sorted.back() );
}
}
#if 1 && defined(DEBUG)
printf( "swapEnds():\n" );
for( unsigned i=0; i<sorted.size(); ++i )
{
printf( "(%.6g,%.6g) (%.6g,%.6g)\n",
sorted[i].start.x, sorted[i].start.y,
sorted[i].end.x, sorted[i].end.y );
}
#endif
aList = sorted;
}
......@@ -197,15 +254,15 @@ static bool isRectangle( POINT_PAIRS& aList )
for( unsigned i=0; i<aList.size(); ++i )
{
if( i < aList.size()-1 )
if( aList[i].p2 != aList[i+1].p1 )
if( aList[i].end != aList[i+1].start )
return false;
if( aList[i].p1.x != aList[i].p2.x
&& aList[i].p1.y != aList[i].p2.y )
if( aList[i].start.x != aList[i].end.x
&& aList[i].start.y != aList[i].end.y )
return false;
}
return ( aList[0].p1 == aList[3].p2 );
return ( aList[0].start == aList[3].end );
}
return false;
}
......@@ -316,7 +373,11 @@ IMAGE* SPECCTRA_DB::makeIMAGE( MODULE* aModule )
pin->padstack_id = padstack->padstack_id;
pin->pin_id = CONV_TO_UTF8( pad->ReturnStringPadName() );
pin->SetVertex( mapPt( pad->m_Pos0 ) );
// copper shape's position is hole position + offset
wxPoint pos = pad->m_Pos0 + pad->m_Offset;
pin->SetVertex( mapPt( pos ) );
}
}
......@@ -421,14 +482,6 @@ void SPECCTRA_DB::makePADSTACKs( BOARD* aBoard, TYPE_COLLECTOR& aPads )
// padstacks.size()-1 is the index of the matching padstack in LIBRARY::padstacks
pad->m_logical_connexion = pcb->library->padstacks.size()-1;
// paddOfset is the offset of copper shape relative to hole position,
// and pad->m_Pos is hole position. All shapes must be shifted by
// this distance, normally (0,0).
// Note that the y correction here is set negative.
POINT padOffset( scale(pad->m_Offset.x), -scale(pad->m_Offset.y) );
// For now, we will report only one layer for the pads. SMD pads are reported on the
// top layer, and through hole are reported on <reserved_layer_name> "signal".
// We could do better if there was actually a "layer type" field within
......@@ -462,7 +515,6 @@ void SPECCTRA_DB::makePADSTACKs( BOARD* aBoard, TYPE_COLLECTOR& aPads )
circle->SetLayerId( layerName );
circle->SetDiameter( diameter );
circle->SetVertex( padOffset );
++coppers;
}
}
......@@ -486,9 +538,6 @@ void SPECCTRA_DB::makePADSTACKs( BOARD* aBoard, TYPE_COLLECTOR& aPads )
POINT lowerLeft( -dx, -dy );
POINT upperRight( dx, dy );
lowerLeft += padOffset;
upperRight += padOffset;
for( int layer=0; layer<reportedLayers; ++layer )
{
if( doLayer[layer] )
......@@ -540,38 +589,55 @@ void SPECCTRA_DB::makePADSTACKs( BOARD* aBoard, TYPE_COLLECTOR& aPads )
shape = new SHAPE( padstack );
padstack->Append( shape );
path = makePath(
POINT( -dr + padOffset.x, padOffset.y - radius ), // aStart
POINT( dr + padOffset.x, padOffset.y - radius ), // aEnd
POINT( -dr, -radius ), // aStart
POINT( dr, -radius ), // aEnd
layerName );
shape->SetShape( path );
shape = new SHAPE( padstack );
padstack->Append( shape );
// @todo: this 1/2 circle arc needs to be split into two quarter circle arcs
qarc = makeArc(
POINT( dr + padOffset.x, padOffset.y - radius), // aStart
POINT( dr + padOffset.x, padOffset.y + radius), // aEnd
POINT( dr + padOffset.x, padOffset.y ), // aCenter
POINT( dr, -radius), // aStart
POINT( dr, 0.0 ), // aEnd
POINT( dr, 0.0 ), // aCenter
layerName );
shape->SetShape( qarc );
shape = new SHAPE( padstack );
padstack->Append( shape );
qarc = makeArc(
POINT( dr, 0.0), // aStart
POINT( dr, radius), // aEnd
POINT( dr, 0.0 ), // aCenter
layerName );
shape->SetShape( qarc );
shape = new SHAPE( padstack );
padstack->Append( shape );
path = makePath(
POINT( dr + padOffset.x, padOffset.y + radius ), // aStart
POINT( -dr + padOffset.x, padOffset.y + radius ), // aEnd
POINT( dr, radius ), // aStart
POINT( -dr, radius ), // aEnd
layerName );
shape->SetShape( path );
shape = new SHAPE( padstack );
padstack->Append( shape );
// @todo: this 1/2 circle arc needs to be split into two quarter circle arcs
qarc = makeArc(
POINT( -dr + padOffset.x, padOffset.y + radius), // aStart
POINT( -dr + padOffset.x, padOffset.y - radius), // aEnd
POINT( -dr + padOffset.x, padOffset.y ), // aCenter
POINT( -dr, radius), // aStart
POINT( -dr, 0.0), // aEnd
POINT( -dr, 0.0 ), // aCenter
layerName );
shape->SetShape( qarc );
shape = new SHAPE( padstack );
padstack->Append( shape );
qarc = makeArc(
POINT( -dr, 0.0), // aStart
POINT( -dr, -radius), // aEnd
POINT( -dr, 0.0 ), // aCenter
layerName );
shape->SetShape( qarc );
++coppers;
}
}
......@@ -595,38 +661,55 @@ void SPECCTRA_DB::makePADSTACKs( BOARD* aBoard, TYPE_COLLECTOR& aPads )
shape = new SHAPE( padstack );
padstack->Append( shape );
path = makePath(
POINT( -radius + padOffset.x, padOffset.y - dr ), // aStart
POINT( -radius + padOffset.x, padOffset.y + dr ), // aEnd
POINT( -radius, -dr ), // aStart
POINT( -radius, dr ), // aEnd
layerName );
shape->SetShape( path );
shape = new SHAPE( padstack );
padstack->Append( shape );
// @todo: this 1/2 circle arc needs to be split into two quarter circle arcs
qarc = makeArc(
POINT( -radius + padOffset.x, padOffset.y + dr ), // aStart
POINT( radius + padOffset.x, padOffset.y + dr), // aEnd
POINT( padOffset.x, padOffset.y +dr ), // aCenter
POINT( -radius, dr ), // aStart
POINT( 0.0, dy ), // aEnd
POINT( 0.0, dr ), // aCenter
layerName );
shape->SetShape( qarc );
shape = new SHAPE( padstack );
padstack->Append( shape );
qarc = makeArc(
POINT( 0.0, dy ), // aStart
POINT( radius, dr), // aEnd
POINT( 0.0, dr ), // aCenter
layerName );
shape->SetShape( qarc );
shape = new SHAPE( padstack );
padstack->Append( shape );
path = makePath(
POINT( radius + padOffset.x, padOffset.y + dr ), // aStart
POINT( radius + padOffset.x, padOffset.y - dr ), // aEnd
POINT( radius, dr ), // aStart
POINT( radius, -dr ), // aEnd
layerName );
shape->SetShape( path );
shape = new SHAPE( padstack );
padstack->Append( shape );
// @todo: this 1/2 circle arc needs to be split into two quarter circle arcs
qarc = makeArc(
POINT( radius + padOffset.x, padOffset.y - dr), // aStart
POINT( -radius + padOffset.x, padOffset.y - dr), // aEnd
POINT( padOffset.x, padOffset.y - dr ), // aCenter
POINT( radius, -dr ), // aStart
POINT( 0.0, -dy ), // aEnd
POINT( 0.0, -dr ), // aCenter
layerName );
shape->SetShape( qarc );
shape = new SHAPE( padstack );
padstack->Append( shape );
qarc = makeArc(
POINT( 0.0, -dy ), // aStart
POINT( -radius, -dr ), // aEnd
POINT( 0.0, -dr ), // aCenter
layerName );
shape->SetShape( qarc );
++coppers;
}
}
......@@ -774,8 +857,8 @@ void SPECCTRA_DB::FromBOARD( BOARD* aBoard )
if( item->GetLayer() == EDGE_N )
{
pair.p1 = mapPt( item->m_Start );
pair.p2 = mapPt( item->m_End );
pair.start = mapPt( item->m_Start );
pair.end = mapPt( item->m_End );
pair.item = item;
ppairs.push_back( pair );
haveEdges = true;
......@@ -802,12 +885,14 @@ void SPECCTRA_DB::FromBOARD( BOARD* aBoard )
rect->layer_id = "pcb";
// opposite corners
rect->SetCorners( ppairs[0].p1, ppairs[2].p1 );
rect->SetCorners( ppairs[0].start, ppairs[2].start );
boundary->rectangle = rect;
}
else
{
#if 0 // PCBNEW user's edges are rarely this clean, let the router figure
// out the mess by using code at #else below.
PATH* path = new PATH( boundary );
path->layer_id = "pcb";
......@@ -815,10 +900,21 @@ void SPECCTRA_DB::FromBOARD( BOARD* aBoard )
{
// unless its a closed polygon, this probably won't work,
// otherwise it will.
path->points.push_back( ppairs[i].p1 );
path->points.push_back( ppairs[i].start );
}
boundary->paths.push_back( path );
#else
for( unsigned i=0; i<ppairs.size(); ++i )
{
PATH* path = new PATH( boundary );
boundary->paths.push_back( path );
path->layer_id = "pcb";
path->points.push_back( ppairs[i].start );
path->points.push_back( ppairs[i].end );
}
#endif
}
pcb->structure->SetBOUNDARY( boundary );
......@@ -960,6 +1056,10 @@ void SPECCTRA_DB::FromBOARD( BOARD* aBoard )
delete image;
}
// @todo: this only works if the user has not modified the MODULE within the PCB
// and made it different from what is in the PCBNEW library. Need to test
// each image for uniqueness, not just based on name as is done here:
COMPONENT* comp = pcb->placement->LookupCOMPONENT( registered->image_id );
PLACE* place = new PLACE( comp );
......@@ -968,8 +1068,6 @@ void SPECCTRA_DB::FromBOARD( BOARD* aBoard )
place->SetRotation( module->m_Orient/10.0 );
place->SetVertex( mapPt( module->m_Pos ) );
place->component_id = CONV_TO_UTF8( module->GetReference() );
// not supported by freerouting.net yet:
place->part_number = CONV_TO_UTF8( module->GetValue() );
// module is flipped from bottom side, set side to T_back
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment