plugin work, accessors

common/base_struct.cpp

@@ -68,7 +68,7 @@ EDA_ITEM::EDA_ITEM( const EDA_ITEM& base )
     m_Parent     = base.m_Parent;
     m_Son        = base.m_Son;
     m_Flags      = base.m_Flags;
-    m_TimeStamp  = base.m_TimeStamp;
+    SetTimeStamp( base.m_TimeStamp );
     m_Status     = base.m_Status;
     m_Selected   = base.m_Selected;
 }
@@ -84,7 +84,7 @@ void EDA_ITEM::InitVars()
     m_List      = NULL;     // I am not on any list yet
     m_Image     = NULL;     // Link to an image copy for undelete or abort command
     m_Flags     = 0;        // flags for editions and other
-    m_TimeStamp = 0;        // Time stamp used for logical links
+    SetTimeStamp( 0 );        // Time stamp used for logical links
     m_Status    = 0;
     m_Selected  = 0;        // Used by block commands, and selective editing
 }
@@ -107,6 +107,13 @@ EDA_ITEM* EDA_ITEM::doClone() const
 }
 
 
+EDA_ITEM* EDA_ITEM::Clone() const
+{
+    // save about 6 bytes per call by hiding the virtual function in this non-inline function.
+    return doClone();
+}
+
+
 SEARCH_RESULT EDA_ITEM::IterateForward( EDA_ITEM*     listStart,
                                         INSPECTOR*    inspector,
                                         const void*   testData,

cvpcb/readschematicnetlist.cpp

@@ -182,7 +182,7 @@ int CVPCB_MAINFRAME::ReadSchematicNetlist()
         while( Line[idx] != ' ' && Line[idx] )
             cbuffer[jj++] = Line[idx++];
         cbuffer[jj] = 0;
-        Cmp->m_TimeStamp = FROM_UTF8(cbuffer);
+        Cmp->m_TimeStamp = FROM_UTF8( cbuffer );
 
         /* search val/ref.lib */
         while( Line[idx] == ' ' )

eeschema/block.cpp

@@ -554,7 +554,7 @@ void SCH_EDIT_FRAME::PasteListOfItems( wxDC* DC )
         // Clear annotation and init new time stamp for the new components:
         if( Struct->Type() == SCH_COMPONENT_T )
         {
-            ( (SCH_COMPONENT*) Struct )->m_TimeStamp = GetNewTimeStamp();
+            ( (SCH_COMPONENT*) Struct )->SetTimeStamp( GetNewTimeStamp() );
             ( (SCH_COMPONENT*) Struct )->ClearAnnotation( NULL );
         }
 

eeschema/bus-wire-junction.cpp

@@ -526,7 +526,7 @@ void SCH_EDIT_FRAME::RepeatDrawItem( wxDC* DC )
         wxPoint pos = GetScreen()->GetCrossHairPosition() -
                       ( (SCH_COMPONENT*) m_itemToRepeat )->GetPosition();
         m_itemToRepeat->SetFlags( IS_NEW );
-        ( (SCH_COMPONENT*) m_itemToRepeat )->m_TimeStamp = GetNewTimeStamp();
+        ( (SCH_COMPONENT*) m_itemToRepeat )->SetTimeStamp( GetNewTimeStamp() );
         m_itemToRepeat->Move( pos );
         m_itemToRepeat->Draw( DrawPanel, DC, wxPoint( 0, 0 ), g_XorMode );
         MoveItem( m_itemToRepeat, DC );

eeschema/component_references_lister.cpp

@@ -668,7 +668,7 @@ SCH_REFERENCE::SCH_REFERENCE( SCH_COMPONENT* aComponent, LIB_COMPONENT* aLibComp
     m_SheetPath = aSheetPath;
     m_IsNew     = false;
     m_Flag      = 0;
-    m_TimeStamp = aComponent->m_TimeStamp;
+    m_TimeStamp = aComponent->GetTimeStamp();
     m_CmpPos    = aComponent->GetPosition();
     m_SheetNum  = 0;
 

eeschema/erc.cpp

@@ -204,7 +204,7 @@ int TestDuplicateSheetNames( bool aCreateMarker )
                     {
                         /* Create a new marker type ERC error*/
                         SCH_MARKER* marker = new SCH_MARKER();
-                        marker->m_TimeStamp = GetNewTimeStamp();
+                        marker->SetTimeStamp( GetNewTimeStamp() );
                         marker->SetData( ERCE_DUPLICATE_SHEET_NAME,
                                          ( (SCH_SHEET*) test_item )->GetPosition(),
                                          _( "Duplicate sheet name" ),
@@ -237,7 +237,7 @@ void Diagnose( NETLIST_OBJECT* aNetItemRef, NETLIST_OBJECT* aNetItemTst,
 
     /* Create new marker for ERC error. */
     marker = new SCH_MARKER();
-    marker->m_TimeStamp = GetNewTimeStamp();
+    marker->SetTimeStamp( GetNewTimeStamp() );
 
     marker->SetMarkerType( MARK_ERC );
     marker->SetErrorLevel( WAR );

eeschema/events_called_functions_for_edit.cpp

@@ -29,7 +29,7 @@ void SCH_EDIT_FRAME::OnCopySchematicItemRequest( wxCommandEvent& event )
     {
         SCH_COMPONENT* newitem;
         newitem = new SCH_COMPONENT( *( (SCH_COMPONENT*) curr_item ) );
-        newitem->m_TimeStamp = GetNewTimeStamp();
+        newitem->SetTimeStamp( GetNewTimeStamp() );
         newitem->ClearAnnotation( NULL );
         newitem->m_Flags = IS_NEW;
         MoveItem( (SCH_ITEM*) newitem, &dc );

eeschema/netform.cpp

@@ -1035,7 +1035,7 @@ XNODE* EXPORT_HELP::makeGenericComponents()
             xsheetpath->AddAttribute( sNames, path->PathHumanReadable() );
             xsheetpath->AddAttribute( sTStamps, path->Path() );
 
-            timeStamp.Printf( sTSFmt, comp->m_TimeStamp );
+            timeStamp.Printf( sTSFmt, comp->GetTimeStamp() );
             xcomp->AddChild( node( sTStamp, timeStamp ) );
         }
     }

eeschema/operations_on_items_lists.cpp

@@ -207,13 +207,13 @@ void DuplicateItemsInList( SCH_SCREEN* screen, PICKED_ITEMS_LIST& aItemsList,
             case SCH_SHEET_T:
             {
                 SCH_SHEET* sheet = (SCH_SHEET*) newitem;
-                sheet->m_TimeStamp = GetNewTimeStamp();
+                sheet->SetTimeStamp( GetNewTimeStamp() );
                 sheet->SetSon( NULL );
                 break;
             }
 
             case SCH_COMPONENT_T:
-                ( (SCH_COMPONENT*) newitem )->m_TimeStamp = GetNewTimeStamp();
+                ( (SCH_COMPONENT*) newitem )->SetTimeStamp( GetNewTimeStamp() );
                 ( (SCH_COMPONENT*) newitem )->ClearAnnotation( NULL );
                 break;
             }
@@ -246,7 +246,7 @@ SCH_ITEM* DuplicateStruct( SCH_ITEM* aDrawStruct, bool aClone )
     SCH_ITEM* NewDrawStruct = aDrawStruct->Clone();
 
     if( aClone )
-        NewDrawStruct->m_TimeStamp = aDrawStruct->m_TimeStamp;
+        NewDrawStruct->SetTimeStamp( aDrawStruct->GetTimeStamp() );
 
     NewDrawStruct->m_Image = aDrawStruct;
 

eeschema/sch_component.cpp

@@ -130,7 +130,7 @@ SCH_COMPONENT::SCH_COMPONENT( LIB_COMPONENT& libComponent, SCH_SHEET_PATH* sheet
     m_unit      = unit;
     m_convert   = convert;
     m_ChipName  = libComponent.GetName();
-    m_TimeStamp = GetNewTimeStamp();
+    SetTimeStamp( GetNewTimeStamp() );
 
     if( setNewItemFlag )
         m_Flags = IS_NEW | IS_MOVED;
@@ -189,7 +189,7 @@ SCH_COMPONENT::SCH_COMPONENT( const SCH_COMPONENT& aComponent ) :
     m_unit = aComponent.m_unit;
     m_convert = aComponent.m_convert;
     m_ChipName = aComponent.m_ChipName;
-    m_TimeStamp = aComponent.m_TimeStamp;
+    SetTimeStamp( aComponent.m_TimeStamp );
     m_transform = aComponent.m_transform;
     m_prefix = aComponent.m_prefix;
     m_PathsAndReferences = aComponent.m_PathsAndReferences;
@@ -524,7 +524,7 @@ void SCH_COMPONENT::SetTimeStamp( long aNewTimeStamp )
 
     string_timestamp.Printf( wxT( "%8.8X" ), aNewTimeStamp );
     string_oldtimestamp.Printf( wxT( "%8.8X" ), m_TimeStamp );
-    m_TimeStamp = aNewTimeStamp;
+    SetTimeStamp( aNewTimeStamp );
 
     for( unsigned ii = 0; ii < m_PathsAndReferences.GetCount(); ii++ )
     {

eeschema/sch_screen.cpp

@@ -1327,7 +1327,7 @@ int SCH_SCREEN::GetConnection( const wxPoint& aPosition, PICKED_ITEMS_LIST& aLis
  */
 static bool SortByTimeStamp( const EDA_ITEM* item1, const EDA_ITEM* item2 )
 {
-    int ii = item1->m_TimeStamp - item2->m_TimeStamp;
+    int ii = item1->GetTimeStamp() - item2->GetTimeStamp();
 
     /* If the time stamps are the same, compare type in order to have component objects
      * before sheet object. This is done because changing the sheet time stamp
@@ -1463,7 +1463,7 @@ int SCH_SCREENS::ReplaceDuplicateTimeStamps()
 
         SCH_ITEM* nextItem = (SCH_ITEM*)items[ii + 1];
 
-        if( item->m_TimeStamp == nextItem->m_TimeStamp )
+        if( item->GetTimeStamp() == nextItem->GetTimeStamp() )
         {
             count++;
 
@@ -1477,7 +1477,7 @@ int SCH_SCREENS::ReplaceDuplicateTimeStamps()
             // @todo: see how to change sheet paths for its cmp list (can
             //        be possible in most cases)
             else
-                item->m_TimeStamp = GetNewTimeStamp();
+                item->SetTimeStamp( GetNewTimeStamp() );
         }
     }
 

eeschema/sch_sheet.cpp

@@ -53,7 +53,7 @@ SCH_SHEET::SCH_SHEET( const wxPoint& pos ) :
     m_Layer = LAYER_SHEET;
     m_pos = pos;
     m_size = wxSize( MIN_SHEET_WIDTH, MIN_SHEET_HEIGHT );
-    m_TimeStamp = GetNewTimeStamp();
+    SetTimeStamp( GetNewTimeStamp() );
     m_sheetNameSize = m_fileNameSize = 60;
     m_screen = NULL;
     m_name.Printf( wxT( "Sheet%8.8lX" ), m_TimeStamp );
@@ -67,7 +67,7 @@ SCH_SHEET::SCH_SHEET( const SCH_SHEET& aSheet ) :
     m_pos = aSheet.m_pos;
     m_size = aSheet.m_size;
     m_Layer = aSheet.m_Layer;
-    m_TimeStamp = aSheet.m_TimeStamp;
+    SetTimeStamp( aSheet.m_TimeStamp );
     m_sheetNameSize = aSheet.m_sheetNameSize;
     m_fileNameSize = aSheet.m_fileNameSize;
     m_screen = aSheet.m_screen;
@@ -184,7 +184,7 @@ bool SCH_SHEET::Load( LINE_READER& aLine, wxString& aErrorMsg )
     SCH_SHEET_PIN*   sheetPin;
     char*            ptcar;
 
-    m_TimeStamp = GetNewTimeStamp();
+    SetTimeStamp( GetNewTimeStamp() );
 
     // sheets are added to the GetDrawItems() like other schematic components.
     // however, in order to preserve the hierarchy (through m_Parent pointers),
@@ -224,7 +224,7 @@ bool SCH_SHEET::Load( LINE_READER& aLine, wxString& aErrorMsg )
         {
             sscanf( ((char*)aLine) + 1, "%lX", &m_TimeStamp );
             if( m_TimeStamp == 0 )  // zero is not unique!
-                m_TimeStamp = GetNewTimeStamp();
+                SetTimeStamp( GetNewTimeStamp() );
             continue;
         }
 

eeschema/sch_sheet_path.cpp

@@ -101,10 +101,10 @@ int SCH_SHEET_PATH::Cmp( const SCH_SHEET_PATH& aSheetPathToTest ) const
     //otherwise, same number of sheets.
     for( unsigned i = 0; i<m_numSheets; i++ )
     {
-        if( m_sheets[i]->m_TimeStamp > aSheetPathToTest.m_sheets[i]->m_TimeStamp )
+        if( m_sheets[i]->GetTimeStamp() > aSheetPathToTest.m_sheets[i]->GetTimeStamp() )
             return 1;
 
-        if( m_sheets[i]->m_TimeStamp < aSheetPathToTest.m_sheets[i]->m_TimeStamp )
+        if( m_sheets[i]->GetTimeStamp() < aSheetPathToTest.m_sheets[i]->GetTimeStamp() )
             return -1;
     }
 
@@ -200,7 +200,7 @@ wxString SCH_SHEET_PATH::Path() const
     // it's timestamp changes anyway.
     for( unsigned i = 1; i < m_numSheets; i++ )
     {
-        t.Printf( _( "%8.8lX/" ), m_sheets[i]->m_TimeStamp );
+        t.Printf( _( "%8.8lX/" ), m_sheets[i]->GetTimeStamp() );
         s = s + t;
     }
 

eeschema/sheet.cpp

@@ -312,7 +312,7 @@ SCH_SHEET* SCH_EDIT_FRAME::CreateSheet( wxDC* aDC )
     SCH_SHEET* sheet = new SCH_SHEET( GetScreen()->GetCrossHairPosition() );
 
     sheet->SetFlags( IS_NEW | IS_RESIZED );
-    sheet->m_TimeStamp = GetNewTimeStamp();
+    sheet->SetTimeStamp( GetNewTimeStamp() );
     sheet->SetParent( GetScreen() );
     sheet->SetScreen( NULL );
 

gerbview/class_gerber_draw_item.cpp

@@ -70,7 +70,7 @@ GERBER_DRAW_ITEM::GERBER_DRAW_ITEM( const GERBER_DRAW_ITEM& aSource ) :
     m_Shape = aSource.m_Shape;
 
     m_Flags     = aSource.m_Flags;
-    m_TimeStamp = aSource.m_TimeStamp;
+    SetTimeStamp( aSource.m_TimeStamp );
 
     SetStatus( aSource.ReturnStatus() );
     m_Start         = aSource.m_Start;

include/base_struct.h

@@ -366,16 +366,17 @@ private:
     int           m_Status;
 
 protected:
-    EDA_ITEM*     Pnext;          /* Linked list: Link (next struct) */
-    EDA_ITEM*     Pback;          /* Linked list: Link (previous struct) */
+    EDA_ITEM*     Pnext;          ///< next in linked list
+    EDA_ITEM*     Pback;          ///< previous in linked list
+    DHEAD*        m_List;         ///< which DLIST I am on.
+
     EDA_ITEM*     m_Parent;       /* Linked list: Link (parent struct) */
     EDA_ITEM*     m_Son;          /* Linked list: Link (son struct) */
-    DHEAD*        m_List;         ///< which DLIST I am on.
+    unsigned long m_TimeStamp;    ///< Time stamp used for logical links
 
 public:
     int           m_Flags;        // flags for editing and other uses.
 
-    unsigned long m_TimeStamp;    // Time stamp used for logical links
     int           m_Selected;     /* Used by block commands, and selective editing */
 
     // member used in undo/redo function
@@ -385,7 +386,7 @@ private:
     void InitVars();
 
     /**
-     * @brief Function doClone
+     * Function doClone
      * is used by the derived class to actually implement the cloning.
      *
      * The default version will return NULL in release builds and likely crash the
@@ -520,15 +521,17 @@ public:
     }
 
     /**
-     * @brief Function Clone
+     * Function Clone
      * creates a duplicate of this item with linked list members set to NULL.
      *
      * The Clone() function only calls the private virtual doClone() which actually
      * does the cloning for the derived object.
      *
+     * @todo: use this instead of Copy() everywhere, then kill Copy().
+     *
      * @return A clone of the item.
      */
-    EDA_ITEM* Clone() const { return doClone(); }
+    EDA_ITEM* Clone() const;    // should not be inline, to save the ~ 6 bytes per call site.
 
     /**
      * Function IterateForward
@@ -755,20 +758,19 @@ enum FILL_T {
 class EDA_TEXT
 {
 public:
-    int      m_Thickness;               /* pen size used to draw this text */
-    int      m_Orient;                  /* Orient in 0.1 degrees */
-
-    wxString m_Text;                    /* text! */
-    wxPoint  m_Pos;                     /* XY position of anchor text. */
-    wxSize   m_Size;                    /* XY size of text */
+    wxString m_Text;
+    int      m_Thickness;               ///< pen size used to draw this text
+    int      m_Orient;                  ///< Orient in 0.1 degrees
+    wxPoint  m_Pos;                     ///< XY position of anchor text.
+    wxSize   m_Size;                    ///< XY size of text
     bool     m_Mirror;                  ///< true iff mirrored
-    int      m_Attributs;               /* flags (visible...) */
-    bool     m_Italic;                  /* true to simulate (or use if exists)
-                                         * an italic font... */
-    bool     m_Bold;                    /* true to simulate a bold font ... */
-    GRTextHorizJustifyType m_HJustify;  /* Horiz justification */
-    GRTextVertJustifyType m_VJustify;   /* Vertical justification */
-    bool     m_MultilineAllowed;        /* true to use multiline option, false
+    int      m_Attributs;               ///< bit flags such as visible, etc.
+    bool     m_Italic;                  ///< should be italic font (if available)
+    bool     m_Bold;                    ///< should be bold font (if available)
+    GRTextHorizJustifyType m_HJustify;  ///< horizontal justification
+    GRTextVertJustifyType  m_VJustify;  ///< vertical justification
+
+    bool     m_MultilineAllowed;        /**< true to use multiline option, false
                                          * to use only single line text
                                          * Single line is faster in
                                          * calculations than multiline */
@@ -798,7 +800,7 @@ public:
     void SetItalic( bool isItalic ) { m_Italic = isItalic; }
     bool IsItalic() const { return m_Italic; }
 
-    void SetMirrored( bool doMirror ) { m_Mirror = doMirror; }
+    void SetMirrored( bool isMirrored ) { m_Mirror = isMirrored; }
     bool IsMirrored() const { return m_Mirror; }
 
     /**

pcbnew/block.cpp

@@ -854,7 +854,7 @@ void PCB_EDIT_FRAME::Block_Duplicate()
                 module->m_Flags     = 0;
                 newitem = new_module = new MODULE( m_Pcb );
                 new_module->Copy( module );
-                new_module->m_TimeStamp = GetNewTimeStamp();
+                new_module->SetTimeStamp( GetNewTimeStamp() );
                 m_Pcb->m_Modules.PushFront( new_module );
             }
             break;
@@ -877,7 +877,7 @@ void PCB_EDIT_FRAME::Block_Duplicate()
             {
                 ZONE_CONTAINER* new_zone = new ZONE_CONTAINER( (BOARD*) item->GetParent() );
                 new_zone->Copy( (ZONE_CONTAINER*) item );
-                new_zone->m_TimeStamp = GetNewTimeStamp();
+                new_zone->SetTimeStamp( GetNewTimeStamp() );
                 newitem = new_zone;
                 m_Pcb->Add( new_zone );
             }

pcbnew/block_module_editor.cpp

@@ -473,16 +473,21 @@ void MoveMarkedItems( MODULE* module, wxPoint offset )
         switch( item->Type() )
         {
         case PCB_MODULE_TEXT_T:
-            ( (TEXTE_MODULE*) item )->m_Pos += offset;
-            ( (TEXTE_MODULE*) item )->m_Pos0 += offset;
+            {
+                TEXTE_MODULE* tm = (TEXTE_MODULE*) item;
+                tm->m_Pos += offset;
+                tm->SetPos0( tm->GetPos0() + offset );
+            }
             break;
 
         case PCB_MODULE_EDGE_T:
-            ( (EDGE_MODULE*) item )->m_Start += offset;
-            ( (EDGE_MODULE*) item )->m_End += offset;
-
-            ( (EDGE_MODULE*) item )->m_Start0 += offset;
-            ( (EDGE_MODULE*) item )->m_End0 += offset;
+            {
+                EDGE_MODULE* em = (EDGE_MODULE*) item;
+                em->m_Start  += offset;
+                em->m_End    += offset;
+                em->m_Start0 += offset;
+                em->m_End0   += offset;
+            }
             break;
 
         default:
@@ -571,20 +576,25 @@ void MirrorMarkedItems( MODULE* module, wxPoint offset )
         switch( item->Type() )
         {
         case PCB_MODULE_EDGE_T:
-            EDGE_MODULE * edge;
-            edge = (EDGE_MODULE*) item;
-            SETMIRROR( edge->m_Start.x );
-            edge->m_Start0.x = edge->m_Start.x;
-            SETMIRROR( edge->m_End.x );
-            edge->m_End0.x = edge->m_End.x;
-            NEGATE( edge->m_Angle );
+            {
+                EDGE_MODULE* em = (EDGE_MODULE*) item;
+                SETMIRROR( em->m_Start.x );
+                em->m_Start0.x = em->m_Start.x;
+                SETMIRROR( em->m_End.x );
+                em->m_End0.x = em->m_End.x;
+                NEGATE( em->m_Angle );
+            }
             break;
 
         case PCB_MODULE_TEXT_T:
-            tmp = ( (TEXTE_MODULE*) item )->GetPosition();
+            {
+                TEXTE_MODULE* tm = (TEXTE_MODULE*) item;
+                tmp = tm->GetPosition();
                 SETMIRROR( tmp.x );
-            ( (TEXTE_MODULE*) item )->SetPosition( tmp );
-            ( (TEXTE_MODULE*) item )->m_Pos0.x = ( (TEXTE_MODULE*) item )->GetPosition().x;
+                tm->SetPosition( tmp );
+                tmp.y = tm->GetPos0().y;
+                tm->SetPos0( tmp );
+            }
             break;
 
         default:
@@ -633,20 +643,24 @@ void RotateMarkedItems( MODULE* module, wxPoint offset )
         switch( item->Type() )
         {
         case PCB_MODULE_EDGE_T:
-            ROTATE( ( (EDGE_MODULE*) item )->m_Start );
-            ( (EDGE_MODULE*) item )->m_Start0 = ( (EDGE_MODULE*) item )->m_Start;
-            ROTATE( ( (EDGE_MODULE*) item )->m_End );
-            ( (EDGE_MODULE*) item )->m_End0 = ( (EDGE_MODULE*) item )->m_End;
+            {
+                EDGE_MODULE* em = (EDGE_MODULE*) item;
+                ROTATE( em->m_Start );
+                em->m_Start0 = em->m_Start;
+                ROTATE( em->m_End );
+                em->m_End0 = em->m_End;
+            }
             break;
 
         case PCB_MODULE_TEXT_T:
             {
-                wxPoint pos = ( (TEXTE_MODULE*) item )->GetPosition();
+                TEXTE_MODULE* tm = (TEXTE_MODULE*) item;
+                wxPoint pos = tm->GetPosition();
                 ROTATE( pos );
-                ( (TEXTE_MODULE*) item )->SetPosition( pos );
+                tm->SetPosition( pos );
+                tm->SetPos0( tm->GetPosition() );
+                tm->SetOrientation( tm->GetOrientation() + 900 );
             }
-            ( (TEXTE_MODULE*) item )->m_Pos0 = ( (TEXTE_MODULE*) item )->GetPosition();
-            ( (TEXTE_MODULE*) item )->m_Orient += 900;
             break;
 
         default:

pcbnew/class_dimension.cpp

@@ -71,7 +71,7 @@ void DIMENSION::Copy( DIMENSION* source )
     m_Pos       = source->m_Pos;
     m_Shape     = source->m_Shape;
     m_Unit      = source->m_Unit;
-    m_TimeStamp = GetNewTimeStamp();
+    SetTimeStamp( GetNewTimeStamp() );
     m_Text->Copy( source->m_Text );
 
     m_crossBarOx    = source->m_crossBarOx;

pcbnew/class_drawsegment.cpp

@@ -48,7 +48,7 @@ void DRAWSEGMENT::Copy( DRAWSEGMENT* source )
     m_End          = source->m_End;
     m_Shape        = source->m_Shape;
     m_Angle        = source->m_Angle;
-    m_TimeStamp    = source->m_TimeStamp;
+    SetTimeStamp( source->m_TimeStamp );
     m_BezierC1     = source->m_BezierC1;
     m_BezierC2     = source->m_BezierC1;
     m_BezierPoints = source->m_BezierPoints;

pcbnew/class_drawsegment.h

@@ -41,6 +41,7 @@ public:
     DRAWSEGMENT* Back() const { return (DRAWSEGMENT*) Pback; }
 
     void SetWidth( int aWidth ) { m_Width = aWidth; }
+    int GetWidth() const { return m_Width; }
 
     void SetStart( const wxPoint& aStart ) { m_Start = aStart; }
 
@@ -52,10 +53,12 @@ public:
      * @param aAngle is tenths of degrees, but will soon be degrees.
      */
     void SetAngle( double aAngle );     // encapsulates the transition to degrees
+    double GetAngle() const { return m_Angle; }
 
     void SetType( int aType ) { m_Type = aType; }
 
     void SetShape( int aShape ) { m_Shape = aShape; }
+    int GetShape() const { return m_Shape; }
 
     void SetBezControl1( const wxPoint& aPoint ) { m_BezierC1 = aPoint; }
     void SetBezControl2( const wxPoint& aPoint ) { m_BezierC2 = aPoint; }
@@ -104,8 +107,8 @@ public:
      */
     MODULE* GetParentModule() const;
 
-    std::vector<wxPoint>& GetBezierPoints() { return m_BezierPoints; };
-    std::vector<wxPoint>& GetPolyPoints()   { return m_PolyPoints; };
+    const std::vector<wxPoint>& GetBezierPoints() const { return m_BezierPoints; };
+    const std::vector<wxPoint>& GetPolyPoints() const { return m_PolyPoints; };
 
     void SetBezierPoints( std::vector<wxPoint>& aPoints )
     {

pcbnew/class_edge_mod.cpp

@@ -223,7 +223,7 @@ void EDGE_MODULE::DisplayInfo( EDA_DRAW_FRAME* frame )
     frame->AppendMsgPanel( _( "Module" ), module->m_Reference->m_Text, DARKCYAN );
     frame->AppendMsgPanel( _( "Value" ), module->m_Value->m_Text, BLUE );
 
-    msg.Printf( wxT( "%8.8lX" ), module->m_TimeStamp );
+    msg.Printf( wxT( "%8.8lX" ), module->GetTimeStamp() );
     frame->AppendMsgPanel( _( "TimeStamp" ), msg, BROWN );
     frame->AppendMsgPanel( _( "Mod Layer" ), board->GetLayerName( module->GetLayer() ), RED );
     frame->AppendMsgPanel( _( "Seg Layer" ), board->GetLayerName( GetLayer() ), RED );

pcbnew/class_mire.cpp

@@ -50,7 +50,7 @@ void PCB_TARGET::Copy( PCB_TARGET* source )
     m_Pos       = source->m_Pos;
     m_Shape     = source->m_Shape;
     m_Size      = source->m_Size;
-    m_TimeStamp = GetNewTimeStamp();
+    SetTimeStamp( GetNewTimeStamp() );
 }
 
 

pcbnew/class_module.cpp

@@ -125,7 +125,7 @@ void MODULE::Copy( MODULE* aModule )
     m_LastEdit_Time = aModule->m_LastEdit_Time;
     m_Link          = aModule->m_Link;
     m_Path          = aModule->m_Path; //is this correct behavior?
-    m_TimeStamp     = GetNewTimeStamp();
+    SetTimeStamp( GetNewTimeStamp() );
 
     m_LocalClearance                = aModule->m_LocalClearance;
     m_LocalSolderMaskMargin         = aModule->m_LocalSolderMaskMargin;

pcbnew/class_module.h

@@ -23,22 +23,22 @@ class D_PAD;
 class BOARD;
 
 
-enum Mod_Attribut       /* Attributes used for modules */
+/**
+ * Enum MODULE_ATTR_T
+ * is the set of attributes allowed within a MODULE, using MODULE::SetAttributes()
+ * and MODULE::GetAttributes().  These are to be ORed together when calling
+ * MODULE::SetAttrbute()
+ */
+enum MODULE_ATTR_T
 {
-    MOD_DEFAULT = 0,    /* Type default */
-    MOD_CMS = 1,        /* Set for modules listed in the automatic insertion list
-                         *  (usually SMD footprints) */
-    MOD_VIRTUAL = 2     /* Virtual component: when created by copper shapes on
-                         * board (Like edge card connectors, mounting hole...) */
+    MOD_DEFAULT = 0,    ///< default
+    MOD_CMS = 1,        ///< Set for modules listed in the automatic insertion list
+                        ///< (usually SMD footprints)
+    MOD_VIRTUAL = 2     ///< Virtual component: when created by copper shapes on
+                        ///<  board (Like edge card connectors, mounting hole...)
 };
 
 
-/* flags for autoplace and autoroute (.m_ModuleStatus member) */
-#define MODULE_is_LOCKED 0x01  /* module LOCKED: no autoplace allowed */
-#define MODULE_is_PLACED 0x02  /* In autoplace: module automatically placed */
-#define MODULE_to_PLACE  0x04  /* In autoplace: module waiting for autoplace */
-
-
 class MODULE : public BOARD_ITEM
 {
 
@@ -53,22 +53,33 @@ public:
     wxString          m_LibRef;        /* Name of the module in library (and
                                         * the default value when loading a
                                         * module from the library) */
+
     wxString          m_AlternateReference;  /* Used when m_Reference cannot
                                               * be used to identify the
                                               * footprint ( after a full
                                               * reannotation of the schematic */
 
-    int           m_Attributs;          /* Flag bits ( see Mod_Attribut ) */
+    int           m_Attributs;          ///< Flag bits ( see Mod_Attribut )
     int           flag;                 /* Use to trace ratsnest and auto routing. */
-    int           m_ModuleStatus;       /* For autoplace: flags (LOCKED, AUTOPLACED) */
+
+    int           m_ModuleStatus;       ///< For autoplace: flags (LOCKED, AUTOPLACED)
+
+// m_ModuleStatus bits:
+#define MODULE_is_LOCKED    0x01        ///< module LOCKED: no autoplace allowed
+#define MODULE_is_PLACED    0x02        ///< In autoplace: module automatically placed
+#define MODULE_to_PLACE     0x04        ///< In autoplace: module waiting for autoplace
+
+
     EDA_RECT      m_BoundaryBox;        // Bounding box : coordinates on board, real orientation.
     int           m_PadNum;             // Pad count
     int           m_AltPadNum;          /* Pad with netcode > 0 (active pads) count */
 
-    int           m_CntRot90;           /* Automatic placement : cost ( 0..10 )
-                                         * for 90 degrees rotation (Horiz<->Vertical) */
-    int           m_CntRot180;          /* Automatic placement : cost ( 0..10 )
-                                         * for 180 degrees rotation (UP <->Down) */
+    int           m_CntRot90;           ///< Automatic placement : cost ( 0..10 )
+                                        ///< for 90 degrees rotation (Horiz<->Vertical)
+
+    int           m_CntRot180;          ///< Automatic placement : cost ( 0..10 )
+                                        ///< for 180 degrees rotation (UP <->Down)
+
     wxSize        m_Ext;                /* Automatic placement margin around the module */
     double        m_Surface;            // Bounding box area
 
@@ -79,16 +90,16 @@ public:
     wxString      m_Doc;                // Module Description (info for users)
     wxString      m_KeyWord;            // Keywords to select the module in lib
 
-    // Local clearance. When null, the netclasses values are used. Usually
-    // the local clearance is null
+    // Local tolerances. When zero, this means the corresponding netclass value
+    // is used. Usually theses local tolerances zero, in deference to the
+    // corresponding netclass values.
     int           m_LocalClearance;
+    int           m_LocalSolderMaskMargin;         ///< Solder mask margin
+    int           m_LocalSolderPasteMargin;        ///< Solder paste margin
+                                                   ///< absolute value
 
-    // Local mask margins: when NULL, the global design values are used
-    int           m_LocalSolderMaskMargin;         // Solder mask margin
-    int           m_LocalSolderPasteMargin;        /* Solder paste margin
-                                                    * absolute value */
-    double        m_LocalSolderPasteMarginRatio;   /* Solder mask margin ratio
-                                                    * value of pad size */
+    double        m_LocalSolderPasteMarginRatio;   ///< Solder mask margin ratio
+                                                   ///< value of pad size
     // The final margin is the sum of these 2 values
 
 public:
@@ -139,9 +150,35 @@ public:
     void SetPosition( const wxPoint& aPos );  // overload
 
     void SetOrientation( int newangle );
-
     int GetOrientation() const { return m_Orient; }
 
+    const wxString& GetLibRef() const { return m_LibRef; }
+    void SetLibRef( const wxString& aLibRef ) { m_LibRef = aLibRef; }
+
+    const wxString& GetDescription() const { return m_Doc; }
+    void SetDescription( const wxString& aDoc ) { m_Doc = aDoc; }
+
+    const wxString& GetKeywords() const { return m_KeyWord; }
+    void SetKeywords( const wxString& aKeywords ) { m_KeyWord = aKeywords; }
+
+    const wxString& GetPath() const { return m_Path; }
+    void SetPath( const wxString& aPath ) { m_Path = aPath; }
+
+    int GetLocalSolderMaskMargin() const { return m_LocalSolderMaskMargin; }
+    void SetLocalSolderMaskMargin( int aMargin ) { m_LocalSolderMaskMargin = aMargin; }
+
+    int GetLocalClearance() const { return m_LocalClearance; }
+    void SetLocalClearance( int aClearance ) { m_LocalClearance = aClearance; }
+
+    int GetLocalSolderPasteMargin() const { return m_LocalSolderPasteMargin; }
+    void SetLocalSolderPasteMargin( int aMargin ) { m_LocalSolderPasteMargin = aMargin; }
+
+    double GetLocalSolderPasteMarginRatio() const { return m_LocalSolderPasteMarginRatio; }
+    void SetLocalSolderPasteMarginRatio( double aRatio ) { m_LocalSolderPasteMarginRatio = aRatio; }
+
+    int GetAttributes() const { return m_Attributs; }
+    void SetAttributes( int aAttributes ) { m_Attributs = aAttributes; }
+
     /**
      * Function Move
      * move this object.
@@ -177,11 +214,11 @@ public:
     /**
      * Function SetLocked
      * sets the MODULE_is_LOCKED bit in the m_ModuleStatus
-     * @param setLocked When true means turn on locked status, else unlock
+     * @param isLocked When true means turn on locked status, else unlock
      */
-    void SetLocked( bool setLocked )
+    void SetLocked( bool isLocked )
     {
-        if( setLocked )
+        if( isLocked )
             m_ModuleStatus |= MODULE_is_LOCKED;
         else
             m_ModuleStatus &= ~MODULE_is_LOCKED;
@@ -197,6 +234,7 @@ public:
     }
 
     void SetLastEditTime( long aTime ) { m_LastEdit_Time = aTime; }
+    long GetLastEditTime() const { return m_LastEdit_Time; }
 
     /* Reading and writing data on files */
 
@@ -340,7 +378,7 @@ public:
 
     virtual BITMAP_DEF GetMenuImage() const { return  module_xpm; }
 
- #if defined(DEBUG)
+#if defined(DEBUG)
 
     /**
      * Function Show

pcbnew/class_module_transform_functions.cpp

@@ -150,7 +150,7 @@ void MODULE::Rotate(const wxPoint& aRotCentre, int aAngle)
     wxPoint newpos = m_Pos;
     RotatePoint( &newpos, aRotCentre, aAngle );
     SetPosition( newpos );
-    SetOrientation( m_Orient + aAngle );
+    SetOrientation( GetOrientation() + aAngle );
 }
 
 

pcbnew/class_pad.cpp

@@ -139,32 +139,33 @@ const wxPoint D_PAD::ReturnShapePos()
 }
 
 
-/* Return pad name as string in a wxString
- */
-wxString D_PAD::ReturnStringPadName() const
+const wxString D_PAD::GetPadName() const
 {
-    wxString name;
+    // Return pad name as wxString, assume it starts as a non-terminated
+    // utf8 character sequence
+
+    char    temp[sizeof(m_Padname)+1];      // a place to terminate with '\0'
+
+    strncpy( temp, m_Padname, sizeof(m_Padname) );
 
-    ReturnStringPadName( name );
-    return name;
+    temp[sizeof(m_Padname)] = 0;
+
+    return FROM_UTF8( temp );
 }
 
 
-/* Return pad name as string in a buffer
- */
 void D_PAD::ReturnStringPadName( wxString& text ) const
 {
-    int ii;
+    // Return pad name as wxString, assume it starts as a non-terminated
+    // utf8 character sequence
 
-    text.Empty();
+    char    temp[sizeof(m_Padname)+1];      // a place to terminate with '\0'
 
-    for( ii = 0; ii < 4; ii++ )
-    {
-        if( m_Padname[ii] == 0 )
-            break;
+    strncpy( temp, m_Padname, sizeof(m_Padname) );
 
-        text.Append( m_Padname[ii] );
-    }
+    temp[sizeof(m_Padname)] = 0;
+
+    text = FROM_UTF8( temp );
 }
 
 
@@ -712,7 +713,7 @@ wxString D_PAD::GetSelectMenuText() const
         padlayers = _( "???" );
 
     text.Printf( _( "Pad [%s] (%s) of %s" ),
-                 GetChars(ReturnStringPadName() ), GetChars( padlayers ),
+                 GetChars(GetPadName() ), GetChars( padlayers ),
                  GetChars(( (MODULE*) GetParent() )->GetReference() ) );
 
     return text;

pcbnew/class_pad.h

@@ -117,6 +117,7 @@ public:
     int     m_ShapeMaxRadius;       // radius of the circle containing the pad shape
     int     m_Attribut;             // NORMAL, PAD_SMD, PAD_CONN, PAD_HOLE_NOT_PLATED
     int     m_Orient;               // in 1/10 degrees
+
     static int m_PadSketchModePenSize;  // Pen size used to draw pads in sketch mode
                                         // (mode used to print pads on silkscreen layer)
 
@@ -147,22 +148,22 @@ public:
     D_PAD* Next() { return (D_PAD*) Pnext; }
 
     /**
-     * Function GetNetname
-     * @return const wxString * , a pointer to the full netname
+     * Function SetNetname
+     * @param aNetname: the new netname
      */
-    wxString GetNetname() const { return m_Netname; }
+    void SetNetname( const wxString& aNetname );
 
     /**
-     * Function GetShortNetname
-     * @return const wxString * , a pointer to the short netname
+     * Function GetNetname
+     * @return const wxString& - the full netname
      */
-    wxString GetShortNetname() const { return m_ShortNetname; }
+    const wxString& GetNetname() const { return m_Netname; }
 
     /**
-     * Function SetNetname
-     * @param aNetname: the new netname
+     * Function GetShortNetname
+     * @return const wxString& - the short netname
      */
-    void SetNetname( const wxString& aNetname );
+    const wxString& GetShortNetname() const { return m_ShortNetname; }
 
     /**
      * Function GetShape
@@ -171,18 +172,26 @@ public:
     int GetShape() const { return m_PadShape & 0xFF;  }
     void SetShape( int aShape )  { m_PadShape = aShape; }
 
+    void SetPosition( const wxPoint& aPos )     { m_Pos = aPos; }   // overload
     const wxPoint GetPosition() const   // overload
     {
         return m_Pos;
     }
 
-    void SetPosition( const wxPoint& aPos )     { m_Pos = aPos; }   // overload
-
     void SetPos0( const wxPoint& aPos )         { m_Pos0 = aPos; }
+    const wxPoint& GetPos0() const              { return m_Pos0; }
+
     void SetSize( const wxSize& aSize )         { m_Size = aSize; }
+    const wxSize& GetSize() const               { return m_Size; }
+
     void SetDelta( const wxSize& aSize )        { m_DeltaSize = aSize; }
+    const wxSize& GetDelta() const              { return m_DeltaSize; }
+
     void SetDrillSize( const wxSize& aSize )    { m_Drill = aSize; }
+    const wxSize& GetDrillSize() const          { return m_Drill; }
+
     void SetOffset( const wxSize& aOffset )     { m_Offset = aOffset; }
+    const wxSize& GetOffset() const             { return m_Offset; }
 
     /**
      * Function SetOrientation
@@ -198,15 +207,29 @@ public:
     double  GetOrientation() const { return m_Orient; }
 
     void SetDrillShape( int aDrillShape )       { m_DrillShape = aDrillShape; }
+    int GetDrillShape() const                   { return m_DrillShape; }
+
     void SetLayerMask( int aLayerMask )         { m_layerMask = aLayerMask; }
+    int GetLayerMask() const                    { return m_layerMask; }
+
     void SetAttribute( int aAttribute )         { m_Attribut = aAttribute; }
+    int GetAttribute() const                    { return m_Attribut; }
+
     void SetDieLength( int aLength )            { m_LengthDie = aLength; }
-    void SetSolderMaskMargin( int aLength )     { m_LocalSolderMaskMargin = aLength; }
-    void SetSolderPasteMargin( int aLength )    { m_LocalSolderPasteMargin = aLength; }
-    void SetSolderPasteRatio( double aRatio )   { m_LocalSolderPasteMarginRatio = aRatio; }
+    int GetDieLength() const                    { return m_LengthDie; }
+
+    int GetLocalSolderMaskMargin() const { return m_LocalSolderMaskMargin; }
+    void SetLocalSolderMaskMargin( int aMargin ) { m_LocalSolderMaskMargin = aMargin; }
+
+    int GetLocalClearance() const { return m_LocalClearance; }
+    void SetLocalClearance( int aClearance ) { m_LocalClearance = aClearance; }
+
+    int GetLocalSolderPasteMargin() const { return m_LocalSolderPasteMargin; }
+    void SetLocalSolderPasteMargin( int aMargin ) { m_LocalSolderPasteMargin = aMargin; }
+
+    double GetLocalSolderPasteMarginRatio() const { return m_LocalSolderPasteMarginRatio; }
+    void SetLocalSolderPasteMarginRatio( double aRatio ) { m_LocalSolderPasteMarginRatio = aRatio; }
 
-    /// A local override of the Module's clearance
-    void SetPadClearance( int aLength )         { m_LocalClearance = aLength; }
 
     /**
      * Function TransformShapeWithClearanceToPolygon
@@ -324,11 +347,9 @@ public:
      */
     int BuildSegmentFromOvalShape( wxPoint& aSegStart, wxPoint& aSegEnd, int aRotation ) const;
 
-    // others
     void SetPadName( const wxString& name );    // Change pad name
     void SetPadName( const char* aName );
-
-    wxString ReturnStringPadName() const;           // Return pad name as string in a wxString
+    const wxString GetPadName() const;
 
     void ReturnStringPadName( wxString& text ) const; // Return pad name as string in a buffer
 

pcbnew/class_text_mod.h

@@ -27,14 +27,19 @@ class MODULE;
 
 class TEXTE_MODULE : public BOARD_ITEM, public EDA_TEXT
 {
-/* Note: orientation in 1/10 deg relative to the footprint
+    // @todo eliminate these friends, make them use accessors
+    friend class MODULE;
+    friend class FOOTPRINT_EDIT_FRAME;
+
+    /* Note: orientation in 1/10 deg relative to the footprint
      * Physical orient is m_Orient + m_Parent->m_Orient
      */
-public:
-    wxPoint m_Pos0;         // text coordinates relatives to the footprint anchor, orient 0
-                            // Text coordinate ref point is the text centre
-    char    m_Type;         // 0: ref,1: val, others = 2..255
-    bool    m_NoShow;       // true = invisible
+
+    int     m_Type;         ///< 0=ref, 1=val, etc.
+    bool    m_NoShow;       ///< true = invisible
+
+    wxPoint m_Pos0;         ///< text coordinates relatives to the footprint anchor, orient 0.
+                            ///< text coordinate ref point is the text centre
 
 public:
     TEXTE_MODULE( MODULE* parent, int text_type = TEXT_is_DIVERS );
@@ -45,6 +50,11 @@ public:
 
     TEXTE_MODULE* Back() const { return (TEXTE_MODULE*) Pback; }
 
+    void SetPosition( const wxPoint& aPos ) // overload a base
+    {
+        m_Pos = aPos;       // in EDA_TEXT
+    }
+
     const wxPoint GetPosition() const       // overload a base
     {
         return m_Pos;       // from EDA_TEXT
@@ -52,16 +62,13 @@ public:
 
     /// @deprecated it seems
     void SetType( int aType )   { m_Type = aType; }
-
-    void SetPosition( const wxPoint& aPos ) // overload a base
-    {
-        m_Pos = aPos;       // in EDA_TEXT
-    }
+    int GetType() const { return m_Type; }
 
     void SetVisible( bool isVisible )   { m_NoShow = !isVisible; }
     bool IsVisible() const { return !m_NoShow; }
 
     void SetPos0( const wxPoint& aPos )  { m_Pos0 = aPos; }
+    const wxPoint& GetPos0() const { return m_Pos0; }
 
     void Copy( TEXTE_MODULE* source ); // copy structure
 

pcbnew/class_track.cpp

@@ -230,7 +230,7 @@ TRACK::TRACK( const TRACK& Source ) :
     SetNet( Source.GetNet() );
 
     m_Flags     = Source.m_Flags;
-    m_TimeStamp = Source.m_TimeStamp;
+    SetTimeStamp( Source.m_TimeStamp );
     SetStatus( Source.ReturnStatus() );
     m_Start = Source.m_Start;
     m_End   = Source.m_End;

pcbnew/class_zone.cpp

@@ -815,7 +815,7 @@ void ZONE_CONTAINER::Copy( ZONE_CONTAINER* src )
     m_Parent = src->m_Parent;
     m_Layer  = src->m_Layer;
     SetNet( src->GetNet() );
-    m_TimeStamp = src->m_TimeStamp;
+    SetTimeStamp( src->m_TimeStamp );
     m_Poly->RemoveAllContours();
     m_Poly->Copy( src->m_Poly );                // copy outlines
     m_CornerSelection  = -1;                    // For corner moving, corner index to drag, or -1 if no selection

pcbnew/collectors.cpp

@@ -270,7 +270,7 @@ SEARCH_RESULT GENERAL_COLLECTOR::Inspect( EDA_ITEM* testItem, const void* testDa
     case PCB_MODULE_TEXT_T:
         module = (MODULE*) item->GetParent();
 
-        if( m_Guide->IgnoreMTextsMarkedNoShow() && ( (TEXTE_MODULE*) item )->m_NoShow )
+        if( m_Guide->IgnoreMTextsMarkedNoShow() && !( (TEXTE_MODULE*) item )->IsVisible() )
             goto exit;
 
         if( module )

pcbnew/controle.cpp

@@ -168,14 +168,14 @@ BOARD_ITEM* PCB_BASE_FRAME::PcbGeneralLocateAndDisplay( int aHotKeyCode )
             continue;
 
         /* Found a TYPE ZONE */
-        if( item->m_TimeStamp == timestampzone )    // Remove it, redundant, zone already found
+        if( item->GetTimeStamp() == timestampzone )    // Remove it, redundant, zone already found
         {
             m_Collector->Remove( ii );
             ii--;
         }
         else
         {
-            timestampzone = item->m_TimeStamp;
+            timestampzone = item->GetTimeStamp();
         }
     }
 

pcbnew/cross-probing.cpp

@@ -164,7 +164,7 @@ void PCB_EDIT_FRAME::SendMessageToEESCHEMA( BOARD_ITEM* objectToSync )
     case PCB_PAD_T:
         module = (MODULE*) objectToSync->GetParent();
         pad    = (D_PAD*) objectToSync;
-        msg    = pad->ReturnStringPadName();
+        msg    = pad->GetPadName();
         sprintf( cmd, "$PART: \"%s\" $PAD: \"%s\"",
                  TO_UTF8( module->m_Reference->m_Text ),
                  TO_UTF8( msg ) );
@@ -176,9 +176,9 @@ void PCB_EDIT_FRAME::SendMessageToEESCHEMA( BOARD_ITEM* objectToSync )
         module   = (MODULE*) objectToSync->GetParent();
         text_mod = (TEXTE_MODULE*) objectToSync;
 
-        if( text_mod->m_Type == REFERENCE )
+        if( text_mod->GetType() == REFERENCE )
             text_key = "$REF:";
-        else if( text_mod->m_Type == VALUE )
+        else if( text_mod->GetType() == VALUE )
             text_key = "$VAL:";
         else
             break;

pcbnew/dialogs/dialog_edit_module_for_BoardEditor.cpp

@@ -143,10 +143,9 @@ void DIALOG_MODULE_BOARD_EDITOR::OnCancelClick( wxCommandEvent& event )
 
 void DIALOG_MODULE_BOARD_EDITOR::GotoModuleEditor( wxCommandEvent& event )
 {
-    if( m_CurrentModule->m_TimeStamp == 0 )    // Module Editor needs a non
-                                               // null timestamp
+    if( m_CurrentModule->GetTimeStamp() == 0 )    // Module Editor needs a non null timestamp
     {
-        m_CurrentModule->m_TimeStamp = GetNewTimeStamp();
+        m_CurrentModule->SetTimeStamp( GetNewTimeStamp() );
         m_Parent->OnModify();
     }
 

pcbnew/dialogs/dialog_edit_module_text.cpp

@@ -108,11 +108,11 @@ void DialogEditModuleText::initDlg( )
     m_ModuleInfoText->SetLabel( msg );
 
 
-    if( m_currentText->m_Type == TEXT_is_VALUE )
+    if( m_currentText->GetType() == TEXT_is_VALUE )
         m_TextDataTitle->SetLabel( _( "Value:" ) );
-    else if( m_currentText->m_Type == TEXT_is_DIVERS )
+    else if( m_currentText->GetType() == TEXT_is_DIVERS )
         m_TextDataTitle->SetLabel( _( "Text:" ) );
-    else if( m_currentText->m_Type != TEXT_is_REFERENCE )
+    else if( m_currentText->GetType() != TEXT_is_REFERENCE )
         m_TextDataTitle->SetLabel( wxT( "???" ) );
 
     m_Name->SetValue( m_currentText->m_Text );
@@ -128,11 +128,11 @@ void DialogEditModuleText::initDlg( )
         m_parent->m_InternalUnits );
 
     AddUnitSymbol( *m_PosXTitle );
-    PutValueInLocalUnits( *m_TxtPosCtrlX, m_currentText->m_Pos0.x,
+    PutValueInLocalUnits( *m_TxtPosCtrlX, m_currentText->GetPos0().x,
         m_parent->m_InternalUnits );
 
     AddUnitSymbol( *m_PosYTitle );
-    PutValueInLocalUnits( *m_TxtPosCtrlY, m_currentText->m_Pos0.y,
+    PutValueInLocalUnits( *m_TxtPosCtrlY, m_currentText->GetPos0().y,
         m_parent->m_InternalUnits );
 
     AddUnitSymbol( *m_WidthTitle );
@@ -144,9 +144,8 @@ void DialogEditModuleText::initDlg( )
     if( (text_orient != 0) )
         m_Orient->SetSelection( 1 );
 
-    if( m_currentText->m_NoShow )
+    if( !m_currentText->IsVisible() )
         m_Show->SetSelection( 1 );;
-
 }
 
 
@@ -167,13 +166,15 @@ void DialogEditModuleText::OnOkClick( wxCommandEvent& event )
 
     m_currentText->m_Italic = m_Style->GetSelection() == 1 ? true : false;
 
+    wxPoint tmp;
 
     msg = m_TxtPosCtrlX->GetValue();
-    m_currentText->m_Pos0.x = ReturnValueFromString( g_UserUnit, msg,
-        m_parent->m_InternalUnits );
+    tmp.x = ReturnValueFromString( g_UserUnit, msg, m_parent->m_InternalUnits );
+
     msg = m_TxtPosCtrlY->GetValue();
-    m_currentText->m_Pos0.y = ReturnValueFromString( g_UserUnit, msg,
-        m_parent->m_InternalUnits );
+    tmp.y = ReturnValueFromString( g_UserUnit, msg, m_parent->m_InternalUnits );
+
+    m_currentText->SetPos0( tmp );
 
     msg = m_TxtSizeCtrlX->GetValue();
     m_currentText->m_Size.x = ReturnValueFromString( g_UserUnit, msg,
@@ -202,7 +203,8 @@ void DialogEditModuleText::OnOkClick( wxCommandEvent& event )
     }
     m_currentText->SetThickness( width );
 
-    m_currentText->m_NoShow = (m_Show->GetSelection() == 0) ? 0 : 1;
+    m_currentText->SetVisible( m_Show->GetSelection() == 0 );
+
     int text_orient = (m_Orient->GetSelection() == 0) ? 0 : 900;
     m_currentText->m_Orient = text_orient;
 

pcbnew/dialogs/dialog_pad_properties.cpp

@@ -214,7 +214,7 @@ void DIALOG_PAD_PROPERTIES::initValues()
     }
     m_staticTextWarningPadFlipped->Show(m_isFlipped);
 
-    m_PadNumCtrl->SetValue( m_dummyPad->ReturnStringPadName() );
+    m_PadNumCtrl->SetValue( m_dummyPad->GetPadName() );
     m_PadNetNameCtrl->SetValue( m_dummyPad->GetNetname() );
 
     // Display current unit name in dialog:
@@ -637,7 +637,7 @@ void DIALOG_PAD_PROPERTIES::PadPropertiesAccept( wxCommandEvent& event )
         if( m_isFlipped )
             m_CurrentPad->m_layerMask = ChangeSideMaskLayer( m_CurrentPad->m_layerMask );
 
-        m_CurrentPad->SetPadName( g_Pad_Master.ReturnStringPadName() );
+        m_CurrentPad->SetPadName( g_Pad_Master.GetPadName() );
 
         if( m_CurrentPad->GetNetname() != g_Pad_Master.GetNetname() )
         {

pcbnew/editmod.cpp

@@ -102,7 +102,7 @@ void FOOTPRINT_EDIT_FRAME::Place_Ancre( MODULE* pt_mod )
         case PCB_MODULE_TEXT_T:
                 #undef STRUCT
                 #define STRUCT ( (TEXTE_MODULE*) PtStruct )
-            STRUCT->m_Pos0 += moveVector;
+            STRUCT->SetPos0( STRUCT->GetPos0() + moveVector );
             break;
 
         default:
@@ -129,13 +129,13 @@ void FOOTPRINT_EDIT_FRAME::RemoveStruct( EDA_ITEM* Item )
     {
         TEXTE_MODULE* text = (TEXTE_MODULE*) Item;
 
-        if( text->m_Type == TEXT_is_REFERENCE )
+        if( text->GetType() == TEXT_is_REFERENCE )
         {
             DisplayError( this, _( "Text is REFERENCE!" ) );
             break;
         }
 
-        if( text->m_Type == TEXT_is_VALUE )
+        if( text->GetType() == TEXT_is_VALUE )
         {
             DisplayError( this, _( "Text is VALUE!" ) );
             break;

pcbnew/edtxtmod.cpp

@@ -36,7 +36,7 @@ static int     TextInitialOrientation;  // module text initial orientation for
 
 /* Add a new graphical text to the active module (footprint)
  *  Note there always are 2 texts: reference and value.
- *  New texts have the member TEXTE_MODULE.m_Type set to TEXT_is_DIVERS
+ *  New texts have the member TEXTE_MODULE.GetType() set to TEXT_is_DIVERS
  */
 TEXTE_MODULE* PCB_BASE_FRAME::CreateTextModule( MODULE* Module, wxDC* DC )
 {
@@ -118,7 +118,7 @@ void PCB_BASE_FRAME::DeleteTextModule( TEXTE_MODULE* Text )
 
     Module = (MODULE*) Text->GetParent();
 
-    if( Text->m_Type == TEXT_is_DIVERS )
+    if( Text->GetType() == TEXT_is_DIVERS )
     {
         DrawPanel->RefreshDrawingRect( Text->GetBoundingBox() );
         Text->DeleteStructure();
@@ -226,7 +226,7 @@ void PCB_BASE_FRAME::PlaceTexteModule( TEXTE_MODULE* Text, wxDC* DC )
             Text->m_Pos = GetScreen()->GetCrossHairPosition();
             wxPoint textRelPos = Text->m_Pos - Module->m_Pos;
             RotatePoint( &textRelPos, -Module->m_Orient );
-            Text->m_Pos0    = textRelPos;
+            Text->SetPos0( textRelPos );
             Text->m_Flags   = 0;
             Module->m_Flags = 0;
             Module->m_LastEdit_Time = time( NULL );

pcbnew/export_gencad.cpp

@@ -602,8 +602,8 @@ static void CreateComponentsSection( FILE* aFile, BOARD* aPcb )
                                               SILKSCREEN_N_BACK : SILKSCREEN_N_FRONT];
 
             fprintf( aFile, "TEXT %g %g %g %g %s %s \"%s\"",
-                    textmod->m_Pos0.x / SCALE_FACTOR,
-                    -textmod->m_Pos0.y / SCALE_FACTOR,
+                    textmod->GetPos0().x / SCALE_FACTOR,
+                    -textmod->GetPos0().y / SCALE_FACTOR,
                     textmod->m_Size.x / SCALE_FACTOR,
                     orient / 10.0,
                     mirror,

pcbnew/export_vrml.cpp

@@ -834,7 +834,7 @@ static void export_vrml_zones( BOARD* pcb )
 
 static void export_vrml_text_module( TEXTE_MODULE* module ) /*{{{*/
 {
-    if( !module->m_NoShow )
+    if( module->IsVisible() )
     {
         wxSize size = module->m_Size;
 

pcbnew/ioascii.cpp

@@ -165,7 +165,7 @@ int PCB_BASE_FRAME::ReadListeSegmentDescr( LINE_READER* aReader,
             break;
         }
 
-        newTrack->m_TimeStamp = timeStamp;
+        newTrack->SetTimeStamp( timeStamp );
 
         newTrack->m_Start.x = tempStartX;
         newTrack->m_Start.y = tempStartY;

pcbnew/item_io.cpp

@@ -1737,7 +1737,7 @@ int ZONE_CONTAINER::ReadDescr( LINE_READER* aReader )
             }
             else
             {
-                m_TimeStamp = ts;
+                SetTimeStamp( ts );
                 SetNet( netcode );
                 ReadDelimitedText( netname_buffer, netname_buffer, 1024 );
                 m_Netname = FROM_UTF8( netname_buffer );

pcbnew/kicad_plugin.h

@@ -43,7 +43,7 @@ class TEXTE_MODULE;
 class EDGE_MODULE;
 class TRACK;
 class SEGZONE;
-
+class D_PAD;
 
 /**
  * Class KICAD_PLUGIN
@@ -164,21 +164,43 @@ protected:
     //-----<save functions>-----------------------------------------------------
 
     /**
-     * Function checkWriteError
-     * checks to see if there is an error on the output FILE, and its ability to
-     * continue saving to disk.
+     * Function writeError
+     * returns an error message wxString containing the filename being
+     * currently written.
      */
-    void checkWriteError( const char* aCaller ) const;
+    wxString writeError() const;
+
+    int biuSprintf( char* buf, BIU aValue ) const;
 
     /// convert a BIU to engineering units by scaling and formatting to ASCII.
-    std::string biuFmt( BIU aValue );
+    std::string fmtBIU( BIU aValue ) const;
+
+    std::string fmtBIUPair( BIU first, BIU second ) const;
+
+    std::string fmtBIUPoint( const wxPoint& aPoint ) const
+    {
+        return fmtBIUPair( aPoint.x, aPoint.y );
+    }
+
+    std::string fmtBIUSize( const wxSize& aSize ) const
+    {
+        // unfortunately there is inconsistency in the order of saving wxSize,
+        // so sometimes we use fmtBIUPair() directly in the saveXXX() functions.
+        return fmtBIUPair( aSize.x, aSize.y );
+    }
 
     void saveAllSections() const;
     void saveGENERAL() const;
     void saveSHEET() const;
     void saveSETUP() const;
     void saveBOARD() const;
+
     void saveMODULE( const MODULE* aModule ) const;
+    void saveMODULE_TEXT( const TEXTE_MODULE* aText ) const;
+    void saveMODULE_EDGE( const EDGE_MODULE* aGraphic ) const;
+    void savePAD( const D_PAD* aPad ) const;
+    void save3D( const MODULE* aModule ) const;
+
     void saveNETINFO_ITEM( const NETINFO_ITEM* aNet ) const;
     void saveNETCLASSES() const;
     void saveNETCLASS( const NETCLASS* aNetclass ) const;

pcbnew/librairi.cpp

@@ -604,9 +604,9 @@ bool PCB_BASE_FRAME::Save_Module_In_Library( const wxString& aLibName,
     }
 
     /* Write the new footprint ( append it to the list of footprint ) */
-    tmp = aModule->m_TimeStamp; aModule->m_TimeStamp = 0;
+    tmp = aModule->GetTimeStamp(); aModule->SetTimeStamp( 0 );
     aModule->Save( dest );
-    aModule->m_TimeStamp = tmp;
+    aModule->SetTimeStamp( tmp );
 
     output_lib.WriteEndOfFile();
 

pcbnew/loadcmp.cpp

@@ -78,7 +78,7 @@ bool FOOTPRINT_EDIT_FRAME::Load_Module_From_BOARD( MODULE* aModule )
     GetBoard()->m_Status_Pcb = 0;
     newModule = new MODULE( GetBoard() );
     newModule->Copy( aModule );
-    newModule->m_Link = aModule->m_TimeStamp;
+    newModule->m_Link = aModule->GetTimeStamp();
 
     aModule = newModule;
 
@@ -185,7 +185,7 @@ MODULE* PCB_BASE_FRAME::Load_Module_From_Library( const wxString& library, wxDC*
 
         module->m_Flags     = IS_NEW;
         module->m_Link      = 0;
-        module->m_TimeStamp = GetNewTimeStamp();
+        module->SetTimeStamp( GetNewTimeStamp() );
         GetBoard()->m_Status_Pcb = 0;
         module->SetPosition( curspos );
 

pcbnew/modedit.cpp

@@ -284,7 +284,7 @@ void FOOTPRINT_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
 
             for( ; source_module != NULL; source_module = (MODULE*) source_module->Next() )
             {
-                if( module_in_edit->m_Link == source_module->m_TimeStamp )
+                if( module_in_edit->m_Link == source_module->GetTimeStamp() )
                     break;
             }
         }
@@ -325,7 +325,7 @@ void FOOTPRINT_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
             // and the source_module (old module) is deleted
             PICKED_ITEMS_LIST pickList;
             pcbframe->Exchange_Module( source_module, newmodule, &pickList );
-            newmodule->m_TimeStamp = module_in_edit->m_Link;
+            newmodule->SetTimeStamp( module_in_edit->m_Link );
 
             if( pickList.GetCount() )
                 pcbframe->SaveCopyInUndoList( pickList, UR_UNSPECIFIED );
@@ -336,7 +336,7 @@ void FOOTPRINT_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
             pcbframe->GetScreen()->SetCrossHairPosition( wxPoint( 0, 0 ) );
             pcbframe->PlaceModule( newmodule, NULL );
             pcbframe->GetScreen()->SetCrossHairPosition( cursor_pos );
-            newmodule->m_TimeStamp = GetNewTimeStamp();
+            newmodule->SetTimeStamp( GetNewTimeStamp() );
             pcbframe->SaveCopyInUndoList( newmodule, UR_NEW );
         }
 
@@ -413,12 +413,12 @@ void FOOTPRINT_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
 
             if( val && ref )
             {
-                ref->m_Type = TEXT_is_REFERENCE;    // just in case ...
+                ref->SetType( TEXT_is_REFERENCE );    // just in case ...
 
                 if( ref->m_Text.Length() == 0 )
                     ref->m_Text = L"Ref**";
 
-                val->m_Type = TEXT_is_VALUE;        // just in case ...
+                val->SetType( TEXT_is_VALUE );        // just in case ...
 
                 if( val->m_Text.Length() == 0 )
                     val->m_Text = L"Val**";
@@ -708,20 +708,20 @@ void FOOTPRINT_EDIT_FRAME::Transform( MODULE* module, int transform )
 
         for( ; pad != NULL; pad = (D_PAD*) pad->Next() )
         {
-            pad->m_Pos0    = pad->m_Pos;
+            pad->SetPos0( pad->m_Pos );
             pad->m_Orient -= angle;
             RotatePoint( &pad->m_Offset.x, &pad->m_Offset.y, angle );
             EXCHG( pad->m_Size.x, pad->m_Size.y );
             RotatePoint( &pad->m_DeltaSize.x, &pad->m_DeltaSize.y, -angle );
         }
 
-        module->m_Reference->m_Pos0    = module->m_Reference->m_Pos;
+        module->m_Reference->SetPos0( module->m_Reference->m_Pos );
         module->m_Reference->m_Orient += angle;
 
         if( module->m_Reference->m_Orient >= 1800 )
             module->m_Reference->m_Orient -= 1800;
 
-        module->m_Value->m_Pos0    = module->m_Value->m_Pos;
+        module->m_Value->SetPos0( module->m_Value->m_Pos );
         module->m_Value->m_Orient += angle;
 
         if( module->m_Value->m_Orient >= 1800 )
@@ -739,7 +739,7 @@ void FOOTPRINT_EDIT_FRAME::Transform( MODULE* module, int transform )
             if( PtStruct->Type() == PCB_MODULE_TEXT_T )
             {
                 textmod = (TEXTE_MODULE*) PtStruct;
-                textmod->m_Pos0 = textmod->m_Pos;
+                textmod->SetPos0( textmod->m_Pos );
             }
         }
 
@@ -747,7 +747,7 @@ void FOOTPRINT_EDIT_FRAME::Transform( MODULE* module, int transform )
         break;
 
     case ID_MODEDIT_MODULE_MIRROR:
-        for( ; pad != NULL; pad = (D_PAD*) pad->Next() )
+        for( ;  pad;  pad = pad->Next() )
         {
             NEGATE( pad->m_Pos.y );
             NEGATE( pad->m_Pos0.y );

pcbnew/modedit_onclick.cpp

@@ -307,7 +307,7 @@ bool FOOTPRINT_EDIT_FRAME::OnRightClick( const wxPoint& MousePos, wxMenu* PopMen
                                  HK_EDIT_ITEM );
             AddMenuItem( PopMenu, ID_POPUP_PCB_EDIT_TEXTMODULE, msg, KiBitmap( edit_text_xpm ) );
 
-            if( ( (TEXTE_MODULE*) item )->m_Type == TEXT_is_DIVERS )
+            if( ( (TEXTE_MODULE*) item )->GetType() == TEXT_is_DIVERS )
             {
                 msg = AddHotkeyName( _("Delete Text Mod." ), g_Module_Editor_Hokeys_Descr,
                                      HK_DELETE );

pcbnew/moduleframe.cpp

@@ -300,7 +300,7 @@ void FOOTPRINT_EDIT_FRAME::OnUpdateInsertModuleInBoard( wxUpdateUIEvent& aEvent
         // search if the source module was not deleted:
         for( ; source_module != NULL; source_module = source_module->Next() )
         {
-            if( module_in_edit->m_Link == source_module->m_TimeStamp )
+            if( module_in_edit->m_Link == source_module->GetTimeStamp() )
                 break;
         }
 
@@ -326,7 +326,7 @@ void FOOTPRINT_EDIT_FRAME::OnUpdateReplaceModuleInBoard( wxUpdateUIEvent& aEvent
         // search if the source module was not deleted:
         for( ; source_module != NULL; source_module = source_module->Next() )
         {
-            if( module_in_edit->m_Link == source_module->m_TimeStamp )
+            if( module_in_edit->m_Link == source_module->GetTimeStamp() )
                 break;
         }
 

pcbnew/move-drag_pads.cpp

@@ -187,7 +187,7 @@ void PCB_BASE_FRAME::Import_Pad_Settings( D_PAD* aPad, bool aDraw )
 void PCB_BASE_FRAME::AddPad( MODULE* Module, bool draw )
 {
     wxString lastPadName;   // Last used pad name (pad num)
-    lastPadName = g_Pad_Master.ReturnStringPadName();
+    lastPadName = g_Pad_Master.GetPadName();
 
     m_Pcb->m_Status_Pcb     = 0;
     Module->m_LastEdit_Time = time( NULL );

pcbnew/muonde.cpp

@@ -287,8 +287,8 @@ MODULE* PCB_EDIT_FRAME::Genere_Self( wxDC* DC )
 
     Module->m_Reference->m_Pos.y -= Module->m_Reference->m_Size.y;
     Module->m_Value->m_Pos.y     += Module->m_Value->m_Size.y;
-    Module->m_Reference->m_Pos0   = Module->m_Reference->m_Pos - Module->m_Pos;
-    Module->m_Value->m_Pos0 = Module->m_Value->m_Pos - Module->m_Pos;
+    Module->m_Reference->SetPos0( Module->m_Reference->m_Pos - Module->m_Pos );
+    Module->m_Value->SetPos0( Module->m_Value->m_Pos - Module->m_Pos );
 
     Module->CalculateBoundingBox();
     Module->Draw( DrawPanel, DC, GR_OR );
@@ -532,14 +532,22 @@ MODULE* PCB_EDIT_FRAME::Create_MuWaveBasicShape( const wxString& name, int pad_c
         return NULL;
 
     #define DEFAULT_SIZE 30
-    Module->m_TimeStamp           = GetNewTimeStamp();
+    Module->SetTimeStamp( GetNewTimeStamp() );
+
     Module->m_Value->m_Size       = wxSize( DEFAULT_SIZE, DEFAULT_SIZE );
-    Module->m_Value->m_Pos0.y     = -DEFAULT_SIZE;
-    Module->m_Value->m_Pos.y     += Module->m_Value->m_Pos0.y;
+
+    Module->m_Value->SetPos0( wxPoint( 0, -DEFAULT_SIZE ) );
+
+    Module->m_Value->m_Pos.y     += Module->m_Value->GetPos0().y;
+
     Module->m_Value->m_Thickness  = DEFAULT_SIZE / 4;
+
     Module->m_Reference->m_Size   = wxSize( DEFAULT_SIZE, DEFAULT_SIZE );
-    Module->m_Reference->m_Pos0.y = DEFAULT_SIZE;
-    Module->m_Reference->m_Pos.y += Module->m_Reference->m_Pos0.y;
+
+    Module->m_Reference->SetPos0( wxPoint( 0, DEFAULT_SIZE ) );
+
+    Module->m_Reference->m_Pos.y += Module->m_Reference->GetPos0().y;
+
     Module->m_Reference->m_Thickness  = DEFAULT_SIZE / 4;
 
     /* Create 2 pads used in gaps and stubs.

pcbnew/netlist.cpp

@@ -1160,7 +1160,7 @@ bool NETLIST_READER::loadNewModules()
             /* Update schematic links : reference "Time Stamp" and schematic
              * hierarchical path */
             Module->m_Reference->m_Text = cmp->m_CmpName;
-            Module->m_TimeStamp = GetNewTimeStamp();
+            Module->SetTimeStamp( GetNewTimeStamp() );
             Module->m_Path = cmp->m_TimeStampPath;
         }
         else
@@ -1176,7 +1176,7 @@ bool NETLIST_READER::loadNewModules()
 
             Module = newmodule;
             Module->m_Reference->m_Text = cmp->m_CmpName;
-            Module->m_TimeStamp = GetNewTimeStamp();
+            Module->SetTimeStamp( GetNewTimeStamp() );
             Module->m_Path = cmp->m_TimeStampPath;
         }
     }

pcbnew/onrightclick.cpp

@@ -699,7 +699,7 @@ void PCB_EDIT_FRAME::createPopUpMenuForFpTexts( TEXTE_MODULE* FpText, wxMenu* me
     }
 
     // Graphic texts can be deleted only if are not currently edited.
-    if( !flags && FpText->m_Type == TEXT_is_DIVERS )
+    if( !flags && FpText->GetType() == TEXT_is_DIVERS )
     {
         AddMenuItem( sub_menu_Fp_text, ID_POPUP_PCB_DELETE_TEXTMODULE,
                      _( "Delete" ), KiBitmap( delete_xpm ) );

pcbnew/plot_rtn.cpp

@@ -145,7 +145,7 @@ module\n %s's \"reference\" text." ),
         if( ( ( 1 << textLayer ) & aLayerMask ) == 0 )
             trace_ref = false;
 
-        if( text->m_NoShow && !g_PcbPlotOptions.m_PlotInvisibleTexts )
+        if( !text->IsVisible() && !g_PcbPlotOptions.m_PlotInvisibleTexts )
             trace_ref = false;
 
         text = Module->m_Value;
@@ -165,7 +165,7 @@ module\n %s's \"value\" text." ),
         if( ( (1 << textLayer) & aLayerMask ) == 0 )
             trace_val = false;
 
-        if( text->m_NoShow && !g_PcbPlotOptions.m_PlotInvisibleTexts )
+        if( !text->IsVisible() && !g_PcbPlotOptions.m_PlotInvisibleTexts )
             trace_val = false;
 
         /* Plot text fields, if allowed */
@@ -185,7 +185,7 @@ module\n %s's \"value\" text." ),
             if( !g_PcbPlotOptions.m_PlotTextOther )
                 continue;
 
-            if( (pt_texte->m_NoShow) && !g_PcbPlotOptions.m_PlotInvisibleTexts )
+            if( !pt_texte->IsVisible() && !g_PcbPlotOptions.m_PlotInvisibleTexts )
                 continue;
 
             textLayer = pt_texte->GetLayer();

pcbnew/print_board_functions.cpp

@@ -382,10 +382,10 @@ static void Print_Module( EDA_DRAW_PANEL* aPanel, wxDC* aDC, MODULE* aModule,
 
     if( mlayer & aMasklayer )
     {
-        if( !aModule->m_Reference->m_NoShow )
+        if( aModule->m_Reference->IsVisible() )
             aModule->m_Reference->Draw( aPanel, aDC, aDraw_mode );
 
-        if( !aModule->m_Value->m_NoShow )
+        if( aModule->m_Value->IsVisible() )
             aModule->m_Value->Draw( aPanel, aDC, aDraw_mode );
     }
 

pcbnew/specctra_export.cpp

@@ -565,7 +565,7 @@ IMAGE* SPECCTRA_DB::makeIMAGE( BOARD* aBoard, MODULE* aModule )
 
             PIN*    pin = new PIN(image);
 
-            padName = pad->ReturnStringPadName();
+            padName = pad->GetPadName();
             pin->pin_id  = TO_UTF8( padName );
 
             if( padName!=wxEmptyString && pinmap.find( padName )==pinmap.end() )

pcbnew/xchgmod.cpp

@@ -516,7 +516,7 @@ void PCB_EDIT_FRAME::Exchange_Module( MODULE*            aOldModule,
     aNewModule->m_Value->m_Text     = aOldModule->m_Value->m_Text;
 
     /* Updating other parameters */
-    aNewModule->m_TimeStamp = aOldModule->m_TimeStamp;
+    aNewModule->SetTimeStamp( aOldModule->GetTimeStamp() );
     aNewModule->m_Path = aOldModule->m_Path;
 
     /* Update pad netnames ( when possible) */
@@ -624,7 +624,7 @@ void PCB_EDIT_FRAME::RecreateCmpFileFromBoard( wxCommandEvent& aEvent )
     for( ; Module != NULL; Module = Module->Next() )
     {
         fprintf( FichCmp, "\nBeginCmp\n" );
-        fprintf( FichCmp, "TimeStamp = %8.8lX\n", Module->m_TimeStamp );
+        fprintf( FichCmp, "TimeStamp = %8.8lX\n", Module->GetTimeStamp() );
         fprintf( FichCmp, "Path = %s\n", TO_UTF8( Module->m_Path ) );
         fprintf( FichCmp, "Reference = %s;\n",
                  !Module->m_Reference->m_Text.IsEmpty() ?

pcbnew/zones_by_polygon.cpp

@@ -534,7 +534,7 @@ int PCB_EDIT_FRAME::Begin_Zone( wxDC* DC )
     if(  zone->GetNumCorners() == 0 )
     {
         zone->m_Flags = IS_NEW;
-        zone->m_TimeStamp     = GetNewTimeStamp();
+        zone->SetTimeStamp( GetNewTimeStamp() );
         g_Zone_Default_Setting.ExportSetting( *zone );
         zone->m_Poly->Start( g_Zone_Default_Setting.m_CurrentZone_Layer,
                              GetScreen()->GetCrossHairPosition().x,
@@ -791,7 +791,7 @@ void PCB_EDIT_FRAME::Delete_Zone_Contour( wxDC* DC, ZONE_CONTAINER* zone_contain
     EDA_RECT dirty = zone_container->GetBoundingBox();
 
     // For compatibility with old boards: remove old SEGZONE fill segments
-    Delete_OldZone_Fill( NULL, zone_container->m_TimeStamp );
+    Delete_OldZone_Fill( NULL, zone_container->GetTimeStamp() );
 
     // Remove current filling:
     zone_container->UnFill();

pcbnew/zones_by_polygon_fill_functions.cpp

@@ -59,7 +59,7 @@ void PCB_EDIT_FRAME::Delete_OldZone_Fill( SEGZONE* aZone, long aTimestamp )
     if( aZone == NULL )
         TimeStamp = aTimestamp;
     else
-        TimeStamp = aZone->m_TimeStamp; // Save reference time stamp (aZone will be deleted)
+        TimeStamp = aZone->GetTimeStamp(); // Save reference time stamp (aZone will be deleted)
 
     SEGZONE* next;
 
@@ -67,7 +67,7 @@ void PCB_EDIT_FRAME::Delete_OldZone_Fill( SEGZONE* aZone, long aTimestamp )
     {
         next = zone->Next();
 
-        if( zone->m_TimeStamp == TimeStamp )
+        if( zone->GetTimeStamp() == TimeStamp )
         {
             modify = true;
             /* remove item from linked list and free memory */

pcbnew/zones_test_and_combine_areas.cpp

@@ -88,7 +88,7 @@ ZONE_CONTAINER* BOARD::InsertArea( int netcode, int iarea, int layer, int x, int
 
     new_area->SetNet( netcode );
     new_area->SetLayer( layer );
-    new_area->m_TimeStamp = GetNewTimeStamp();
+    new_area->SetTimeStamp( GetNewTimeStamp() );
 
     if( iarea < (int) ( m_ZoneDescriptorList.size() - 1 ) )
         m_ZoneDescriptorList.insert( m_ZoneDescriptorList.begin() + iarea + 1, new_area );
@@ -284,7 +284,7 @@ int BOARD::ClipAreaPolygon( PICKED_ITEMS_LIST * aNewZonesList,
         {
             wxString str;
             str.Printf( wxT( "Area %8.8X of net \"%s\" has arcs intersecting other sides.\n" ),
-                        aCurrArea->m_TimeStamp, GetChars( aCurrArea->m_Netname ) );
+                        aCurrArea->GetTimeStamp(), GetChars( aCurrArea->m_Netname ) );
             str += wxT( "This may cause problems with other editing operations,\n" );
             str += wxT( "such as adding cutouts. It can't be fixed automatically.\n" );
             str += wxT( "Manual correction is recommended." );
@@ -307,7 +307,7 @@ int BOARD::ClipAreaPolygon( PICKED_ITEMS_LIST * aNewZonesList,
         {
             wxString str;
             str.Printf( wxT( "Area %8.8X of net \"%s\" is self-intersecting and will be clipped.\n" ),
-                        aCurrArea->m_TimeStamp, GetChars( aCurrArea->m_Netname ) );
+                        aCurrArea->GetTimeStamp(), GetChars( aCurrArea->m_Netname ) );
             str += wxT( "This may result in splitting the area.\n" );
             str += wxT( "If the area is complex, this may take a few seconds." );
             wxMessageBox( str );