Skip to content

K
kicad-source-mirror
Commit b275d34d authored by dickelbeck's avatar dickelbeck
Browse files
Options

remove AddChild()

parent f52d03fb
Show whitespace changes
Inline Side-by-side
Showing with 94 additions and 38 deletions
pcbnew/dialog_layers_setup.cpp
View file @ b275d34d
......@@ -128,7 +128,6 @@ private:
wxSize txtz;
txtz = m_NameStaticText->GetSize();
// m_NameStaticText->Move( 0, 5 );
m_NameStaticText->Move( offset + (widths[0] - txtz.x)/2, 5 );
offset += widths[0];
......@@ -265,15 +264,14 @@ DIALOG_LAYERS_SETUP::DIALOG_LAYERS_SETUP( WinEDA_PcbFrame* parent ) :
// these 3 controls are handled outside wxformbuilder so that we can add
// them without a sizer. Then we position them manually based on the column
// widths from m_LayerListFexGridSizer->GetColWidths()
m_NameStaticText = new wxStaticText( m_TitlePanel, -1, _("Name"), wxDefaultPosition, wxDefaultSize, 0 );
m_TitlePanel->AddChild( m_NameStaticText );
m_NameStaticText = new wxStaticText( m_TitlePanel, wxID_ANY, _("Name"), wxDefaultPosition, wxDefaultSize, 0 );
m_EnabledStaticText = new wxStaticText( m_TitlePanel, -1, _("Enabled"), wxDefaultPosition, wxDefaultSize, 0 );
m_TitlePanel->AddChild( m_NameStaticText );
m_EnabledStaticText = new wxStaticText( m_TitlePanel, wxID_ANY, _("Enabled"), wxDefaultPosition, wxDefaultSize, 0 );
m_TypeStaticText = new wxStaticText( m_TitlePanel, -1, _("Type"), wxDefaultPosition, wxDefaultSize, 0 );
m_TitlePanel->AddChild( m_TypeStaticText );
m_TypeStaticText = new wxStaticText( m_TitlePanel, wxID_ANY, _("Type"), wxDefaultPosition, wxDefaultSize, 0 );
// set the height of the title panel to be the size of any wxStaticText object
// plus 10 so we can have a border of 5 on both top and bottom.
m_TitlePanel->SetMinSize( wxSize( -1, m_AdhesFrontName->GetSize().y+10 ) );
Layout();
......
pcbnew/dialog_layers_setup_base.cpp
View file @ b275d34d
......@@ -11,7 +11,7 @@
DIALOG_LAYERS_SETUP_BASE::DIALOG_LAYERS_SETUP_BASE( wxWindow* parent, wxWindowID id, const wxString& title, const wxPoint& pos, const wxSize& size, long style ) : wxDialog( parent, id, title, pos, size, style )
{
this->SetSizeHints( wxSize( 600,600 ), wxDefaultSize );
this->SetSizeHints( wxSize( 550,600 ), wxDefaultSize );
wxBoxSizer* bMainSizer;
bMainSizer = new wxBoxSizer( wxVERTICAL );
......@@ -126,6 +126,8 @@ DIALOG_LAYERS_SETUP_BASE::DIALOG_LAYERS_SETUP_BASE( wxWindow* parent, wxWindowID
m_SilkSFrontCheckBox = new wxCheckBox( m_SilkSFrontPanel, ID_SILKSFRONTCHECKBOX, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
m_SilkSFrontCheckBox->SetToolTip( _("If you want a silk screen layer for the front side of the board") );
bSizer5->Add( m_SilkSFrontCheckBox, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxALL, 5 );
m_SilkSFrontPanel->SetSizer( bSizer5 );
......@@ -149,6 +151,8 @@ DIALOG_LAYERS_SETUP_BASE::DIALOG_LAYERS_SETUP_BASE( wxWindow* parent, wxWindowID
m_MaskFrontCheckBox = new wxCheckBox( m_MaskFrontPanel, ID_MASKFRONTCHECKBOX, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
m_MaskFrontCheckBox->SetToolTip( _("If you want a solder mask layer for the front of the board") );
bSizer8->Add( m_MaskFrontCheckBox, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxALL, 5 );
m_MaskFrontPanel->SetSizer( bSizer8 );
......@@ -162,6 +166,8 @@ DIALOG_LAYERS_SETUP_BASE::DIALOG_LAYERS_SETUP_BASE( wxWindow* parent, wxWindowID
m_FrontName = new wxTextCtrl( m_LayersListPanel, ID_FRONTNAME, _("Front_later"), wxDefaultPosition, wxDefaultSize, 0 );
m_FrontName->SetMaxLength( 20 );
m_FrontName->SetToolTip( _("Layer name of front (top) copper layer") );
m_LayerListFlexGridSizer->Add( m_FrontName, 0, wxBOTTOM|wxLEFT|wxRIGHT|wxEXPAND, 5 );
m_FrontPanel = new wxPanel( m_LayersListPanel, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxTAB_TRAVERSAL );
......@@ -172,6 +178,8 @@ DIALOG_LAYERS_SETUP_BASE::DIALOG_LAYERS_SETUP_BASE( wxWindow* parent, wxWindowID
m_FrontCheckBox = new wxCheckBox( m_FrontPanel, ID_FRONTCHECKBOX, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
m_FrontCheckBox->SetToolTip( _("If you want a front copper layer") );
bSizer9->Add( m_FrontCheckBox, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxALL, 5 );
m_FrontPanel->SetSizer( bSizer9 );
......@@ -183,6 +191,8 @@ DIALOG_LAYERS_SETUP_BASE::DIALOG_LAYERS_SETUP_BASE( wxWindow* parent, wxWindowID
int m_FrontChoiceNChoices = sizeof( m_FrontChoiceChoices ) / sizeof( wxString );
m_FrontChoice = new wxChoice( m_LayersListPanel, ID_FRONTCHOICE, wxDefaultPosition, wxDefaultSize, m_FrontChoiceNChoices, m_FrontChoiceChoices, 0 );
m_FrontChoice->SetSelection( 0 );
m_FrontChoice->SetToolTip( _("Copper layer type for Freerouter. Power layers are removed from Freerouter's layer menus.") );
m_LayerListFlexGridSizer->Add( m_FrontChoice, 0, wxBOTTOM|wxEXPAND|wxLEFT|wxRIGHT, 5 );
m_Inner2Name = new wxTextCtrl( m_LayersListPanel, ID_INNER2NAME, _("Inner2"), wxDefaultPosition, wxDefaultSize, 0 );
......@@ -208,6 +218,8 @@ DIALOG_LAYERS_SETUP_BASE::DIALOG_LAYERS_SETUP_BASE( wxWindow* parent, wxWindowID
int m_Inner2ChoiceNChoices = sizeof( m_Inner2ChoiceChoices ) / sizeof( wxString );
m_Inner2Choice = new wxChoice( m_LayersListPanel, ID_INNER2CHOICE, wxDefaultPosition, wxDefaultSize, m_Inner2ChoiceNChoices, m_Inner2ChoiceChoices, 0 );
m_Inner2Choice->SetSelection( 0 );
m_Inner2Choice->SetToolTip( _("Copper layer type for Freerouter. Power layers are removed from Freerouter's layer menus.") );
m_LayerListFlexGridSizer->Add( m_Inner2Choice, 0, wxBOTTOM|wxLEFT|wxRIGHT|wxEXPAND, 5 );
m_Inner3Name = new wxTextCtrl( m_LayersListPanel, ID_INNER3NAME, _("Inner3"), wxDefaultPosition, wxDefaultSize, 0 );
......@@ -233,6 +245,8 @@ DIALOG_LAYERS_SETUP_BASE::DIALOG_LAYERS_SETUP_BASE( wxWindow* parent, wxWindowID
int m_Inner3ChoiceNChoices = sizeof( m_Inner3ChoiceChoices ) / sizeof( wxString );
m_Inner3Choice = new wxChoice( m_LayersListPanel, ID_INNER3CHOICE, wxDefaultPosition, wxDefaultSize, m_Inner3ChoiceNChoices, m_Inner3ChoiceChoices, 0 );
m_Inner3Choice->SetSelection( 0 );
m_Inner3Choice->SetToolTip( _("Copper layer type for Freerouter. Power layers are removed from Freerouter's layer menus.") );
m_LayerListFlexGridSizer->Add( m_Inner3Choice, 0, wxBOTTOM|wxLEFT|wxRIGHT|wxEXPAND, 5 );
m_Inner4Name = new wxTextCtrl( m_LayersListPanel, ID_INNER4NAME, _("Inner4"), wxDefaultPosition, wxDefaultSize, 0 );
......@@ -258,6 +272,8 @@ DIALOG_LAYERS_SETUP_BASE::DIALOG_LAYERS_SETUP_BASE( wxWindow* parent, wxWindowID
int m_Inner4ChoiceNChoices = sizeof( m_Inner4ChoiceChoices ) / sizeof( wxString );
m_Inner4Choice = new wxChoice( m_LayersListPanel, ID_INNER4CHOICE, wxDefaultPosition, wxDefaultSize, m_Inner4ChoiceNChoices, m_Inner4ChoiceChoices, 0 );
m_Inner4Choice->SetSelection( 0 );
m_Inner4Choice->SetToolTip( _("Copper layer type for Freerouter. Power layers are removed from Freerouter's layer menus.") );
m_LayerListFlexGridSizer->Add( m_Inner4Choice, 0, wxBOTTOM|wxLEFT|wxRIGHT|wxEXPAND, 5 );
m_Inner5Name = new wxTextCtrl( m_LayersListPanel, ID_INNER5NAME, _("Inner5"), wxDefaultPosition, wxDefaultSize, 0 );
......@@ -283,6 +299,8 @@ DIALOG_LAYERS_SETUP_BASE::DIALOG_LAYERS_SETUP_BASE( wxWindow* parent, wxWindowID
int m_Inner5ChoiceNChoices = sizeof( m_Inner5ChoiceChoices ) / sizeof( wxString );
m_Inner5Choice = new wxChoice( m_LayersListPanel, ID_INNER5CHOICE, wxDefaultPosition, wxDefaultSize, m_Inner5ChoiceNChoices, m_Inner5ChoiceChoices, 0 );
m_Inner5Choice->SetSelection( 0 );
m_Inner5Choice->SetToolTip( _("Copper layer type for Freerouter. Power layers are removed from Freerouter's layer menus.") );
m_LayerListFlexGridSizer->Add( m_Inner5Choice, 0, wxBOTTOM|wxLEFT|wxRIGHT|wxEXPAND, 5 );
m_Inner6Name = new wxTextCtrl( m_LayersListPanel, ID_INNER6NAME, _("Inner6"), wxDefaultPosition, wxDefaultSize, 0 );
......@@ -308,6 +326,8 @@ DIALOG_LAYERS_SETUP_BASE::DIALOG_LAYERS_SETUP_BASE( wxWindow* parent, wxWindowID
int m_Inner6ChoiceNChoices = sizeof( m_Inner6ChoiceChoices ) / sizeof( wxString );
m_Inner6Choice = new wxChoice( m_LayersListPanel, ID_INNER6CHOICE, wxDefaultPosition, wxDefaultSize, m_Inner6ChoiceNChoices, m_Inner6ChoiceChoices, 0 );
m_Inner6Choice->SetSelection( 0 );
m_Inner6Choice->SetToolTip( _("Copper layer type for Freerouter. Power layers are removed from Freerouter's layer menus.") );
m_LayerListFlexGridSizer->Add( m_Inner6Choice, 0, wxBOTTOM|wxLEFT|wxRIGHT|wxEXPAND, 5 );
m_Inner7Name = new wxTextCtrl( m_LayersListPanel, ID_INNER7NAME, _("Inner7"), wxDefaultPosition, wxDefaultSize, 0 );
......@@ -333,6 +353,8 @@ DIALOG_LAYERS_SETUP_BASE::DIALOG_LAYERS_SETUP_BASE( wxWindow* parent, wxWindowID
int m_Inner7ChoiceNChoices = sizeof( m_Inner7ChoiceChoices ) / sizeof( wxString );
m_Inner7Choice = new wxChoice( m_LayersListPanel, ID_INNER7CHOICE, wxDefaultPosition, wxDefaultSize, m_Inner7ChoiceNChoices, m_Inner7ChoiceChoices, 0 );
m_Inner7Choice->SetSelection( 0 );
m_Inner7Choice->SetToolTip( _("Copper layer type for Freerouter. Power layers are removed from Freerouter's layer menus.") );
m_LayerListFlexGridSizer->Add( m_Inner7Choice, 0, wxBOTTOM|wxLEFT|wxRIGHT|wxEXPAND, 5 );
m_Inner8Name = new wxTextCtrl( m_LayersListPanel, ID_INNER8NAME, _("Inner8"), wxDefaultPosition, wxDefaultSize, 0 );
......@@ -358,6 +380,8 @@ DIALOG_LAYERS_SETUP_BASE::DIALOG_LAYERS_SETUP_BASE( wxWindow* parent, wxWindowID
int m_Inner8ChoiceNChoices = sizeof( m_Inner8ChoiceChoices ) / sizeof( wxString );
m_Inner8Choice = new wxChoice( m_LayersListPanel, ID_INNER8CHOICE, wxDefaultPosition, wxDefaultSize, m_Inner8ChoiceNChoices, m_Inner8ChoiceChoices, 0 );
m_Inner8Choice->SetSelection( 0 );
m_Inner8Choice->SetToolTip( _("Copper layer type for Freerouter. Power layers are removed from Freerouter's layer menus.") );
m_LayerListFlexGridSizer->Add( m_Inner8Choice, 0, wxBOTTOM|wxLEFT|wxRIGHT|wxEXPAND, 5 );
m_Inner9Name = new wxTextCtrl( m_LayersListPanel, ID_INNER9NAME, _("Inner9"), wxDefaultPosition, wxDefaultSize, 0 );
......@@ -383,6 +407,8 @@ DIALOG_LAYERS_SETUP_BASE::DIALOG_LAYERS_SETUP_BASE( wxWindow* parent, wxWindowID
int m_Inner9ChoiceNChoices = sizeof( m_Inner9ChoiceChoices ) / sizeof( wxString );
m_Inner9Choice = new wxChoice( m_LayersListPanel, ID_INNER9CHOICE, wxDefaultPosition, wxDefaultSize, m_Inner9ChoiceNChoices, m_Inner9ChoiceChoices, 0 );
m_Inner9Choice->SetSelection( 0 );
m_Inner9Choice->SetToolTip( _("Copper layer type for Freerouter. Power layers are removed from Freerouter's layer menus.") );
m_LayerListFlexGridSizer->Add( m_Inner9Choice, 0, wxBOTTOM|wxLEFT|wxRIGHT|wxEXPAND, 5 );
m_Inner10Name = new wxTextCtrl( m_LayersListPanel, ID_INNER10NAME, _("Inner10"), wxDefaultPosition, wxDefaultSize, 0 );
......@@ -408,6 +434,8 @@ DIALOG_LAYERS_SETUP_BASE::DIALOG_LAYERS_SETUP_BASE( wxWindow* parent, wxWindowID
int m_Inner10ChoiceNChoices = sizeof( m_Inner10ChoiceChoices ) / sizeof( wxString );
m_Inner10Choice = new wxChoice( m_LayersListPanel, ID_INNER10CHOICE, wxDefaultPosition, wxDefaultSize, m_Inner10ChoiceNChoices, m_Inner10ChoiceChoices, 0 );
m_Inner10Choice->SetSelection( 0 );
m_Inner10Choice->SetToolTip( _("Copper layer type for Freerouter. Power layers are removed from Freerouter's layer menus.") );
m_LayerListFlexGridSizer->Add( m_Inner10Choice, 0, wxBOTTOM|wxLEFT|wxRIGHT|wxEXPAND, 5 );
m_Inner11Name = new wxTextCtrl( m_LayersListPanel, ID_INNER11NAME, _("Inner11"), wxDefaultPosition, wxDefaultSize, 0 );
......@@ -433,6 +461,8 @@ DIALOG_LAYERS_SETUP_BASE::DIALOG_LAYERS_SETUP_BASE( wxWindow* parent, wxWindowID
int m_Inner11ChoiceNChoices = sizeof( m_Inner11ChoiceChoices ) / sizeof( wxString );
m_Inner11Choice = new wxChoice( m_LayersListPanel, ID_INNER11CHOICE, wxDefaultPosition, wxDefaultSize, m_Inner11ChoiceNChoices, m_Inner11ChoiceChoices, 0 );
m_Inner11Choice->SetSelection( 0 );
m_Inner11Choice->SetToolTip( _("Copper layer type for Freerouter. Power layers are removed from Freerouter's layer menus.") );
m_LayerListFlexGridSizer->Add( m_Inner11Choice, 0, wxBOTTOM|wxLEFT|wxRIGHT|wxEXPAND, 5 );
m_Inner12Name = new wxTextCtrl( m_LayersListPanel, ID_INNER12NAME, _("Inner12"), wxDefaultPosition, wxDefaultSize, 0 );
......@@ -458,6 +488,8 @@ DIALOG_LAYERS_SETUP_BASE::DIALOG_LAYERS_SETUP_BASE( wxWindow* parent, wxWindowID
int m_Inner12ChoiceNChoices = sizeof( m_Inner12ChoiceChoices ) / sizeof( wxString );
m_Inner12Choice = new wxChoice( m_LayersListPanel, ID_INNER12CHOICE, wxDefaultPosition, wxDefaultSize, m_Inner12ChoiceNChoices, m_Inner12ChoiceChoices, 0 );
m_Inner12Choice->SetSelection( 0 );
m_Inner12Choice->SetToolTip( _("Copper layer type for Freerouter. Power layers are removed from Freerouter's layer menus.") );
m_LayerListFlexGridSizer->Add( m_Inner12Choice, 0, wxBOTTOM|wxLEFT|wxRIGHT|wxEXPAND, 5 );
m_Inner13Name = new wxTextCtrl( m_LayersListPanel, ID_INNER13NAME, _("Inner13"), wxDefaultPosition, wxDefaultSize, 0 );
......@@ -483,6 +515,8 @@ DIALOG_LAYERS_SETUP_BASE::DIALOG_LAYERS_SETUP_BASE( wxWindow* parent, wxWindowID
int m_Inner13ChoiceNChoices = sizeof( m_Inner13ChoiceChoices ) / sizeof( wxString );
m_Inner13Choice = new wxChoice( m_LayersListPanel, ID_INNER13CHOICE, wxDefaultPosition, wxDefaultSize, m_Inner13ChoiceNChoices, m_Inner13ChoiceChoices, 0 );
m_Inner13Choice->SetSelection( 0 );
m_Inner13Choice->SetToolTip( _("Copper layer type for Freerouter. Power layers are removed from Freerouter's layer menus.") );
m_LayerListFlexGridSizer->Add( m_Inner13Choice, 0, wxBOTTOM|wxLEFT|wxRIGHT|wxEXPAND, 5 );
m_Inner14Name = new wxTextCtrl( m_LayersListPanel, ID_INNER14NAME, _("Inner14"), wxDefaultPosition, wxDefaultSize, 0 );
......@@ -508,6 +542,8 @@ DIALOG_LAYERS_SETUP_BASE::DIALOG_LAYERS_SETUP_BASE( wxWindow* parent, wxWindowID
int m_Inner14ChoiceNChoices = sizeof( m_Inner14ChoiceChoices ) / sizeof( wxString );
m_Inner14Choice = new wxChoice( m_LayersListPanel, ID_INNER14CHOICE, wxDefaultPosition, wxDefaultSize, m_Inner14ChoiceNChoices, m_Inner14ChoiceChoices, 0 );
m_Inner14Choice->SetSelection( 0 );
m_Inner14Choice->SetToolTip( _("Copper layer type for Freerouter. Power layers are removed from Freerouter's layer menus.") );
m_LayerListFlexGridSizer->Add( m_Inner14Choice, 0, wxBOTTOM|wxLEFT|wxRIGHT|wxEXPAND, 5 );
m_Inner15Name = new wxTextCtrl( m_LayersListPanel, ID_INNER15NAME, _("Inner15"), wxDefaultPosition, wxDefaultSize, 0 );
......@@ -533,10 +569,14 @@ DIALOG_LAYERS_SETUP_BASE::DIALOG_LAYERS_SETUP_BASE( wxWindow* parent, wxWindowID
int m_Inner15ChoiceNChoices = sizeof( m_Inner15ChoiceChoices ) / sizeof( wxString );
m_Inner15Choice = new wxChoice( m_LayersListPanel, ID_INNER15CHOICE, wxDefaultPosition, wxDefaultSize, m_Inner15ChoiceNChoices, m_Inner15ChoiceChoices, 0 );
m_Inner15Choice->SetSelection( 0 );
m_Inner15Choice->SetToolTip( _("Copper layer type for Freerouter. Power layers are removed from Freerouter's layer menus.") );
m_LayerListFlexGridSizer->Add( m_Inner15Choice, 0, wxBOTTOM|wxLEFT|wxRIGHT|wxEXPAND, 5 );
m_BackName = new wxTextCtrl( m_LayersListPanel, ID_BACKNAME, _("Back"), wxDefaultPosition, wxDefaultSize, 0 );
m_BackName->SetMaxLength( 20 );
m_BackName->SetToolTip( _("Layer name of back (bottom) copper layer") );
m_LayerListFlexGridSizer->Add( m_BackName, 0, wxBOTTOM|wxLEFT|wxRIGHT|wxEXPAND, 5 );
m_BackPanel = new wxPanel( m_LayersListPanel, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxTAB_TRAVERSAL );
......@@ -547,6 +587,8 @@ DIALOG_LAYERS_SETUP_BASE::DIALOG_LAYERS_SETUP_BASE( wxWindow* parent, wxWindowID
m_BackCheckBox = new wxCheckBox( m_BackPanel, ID_BACKCHECKBOX, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
m_BackCheckBox->SetToolTip( _("If you want a back copper layer") );
bBackSizer->Add( m_BackCheckBox, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxALL, 5 );
m_BackPanel->SetSizer( bBackSizer );
......@@ -558,6 +600,8 @@ DIALOG_LAYERS_SETUP_BASE::DIALOG_LAYERS_SETUP_BASE( wxWindow* parent, wxWindowID
int m_BackChoiceNChoices = sizeof( m_BackChoiceChoices ) / sizeof( wxString );
m_BackChoice = new wxChoice( m_LayersListPanel, ID_BACKCHOICE, wxDefaultPosition, wxDefaultSize, m_BackChoiceNChoices, m_BackChoiceChoices, 0 );
m_BackChoice->SetSelection( 0 );
m_BackChoice->SetToolTip( _("Copper layer type for Freerouter. Power layers are removed from Freerouter's layer menus.") );
m_LayerListFlexGridSizer->Add( m_BackChoice, 0, wxBOTTOM|wxLEFT|wxRIGHT|wxEXPAND, 5 );
m_MaskBackName = new wxStaticText( m_LayersListPanel, ID_MASKBACKNAME, _("Mask_Back_later"), wxDefaultPosition, wxDefaultSize, 0 );
......@@ -572,6 +616,8 @@ DIALOG_LAYERS_SETUP_BASE::DIALOG_LAYERS_SETUP_BASE( wxWindow* parent, wxWindowID
m_MaskBackCheckBox = new wxCheckBox( m_panel21, ID_MASKBACKCHECKBOX, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
m_MaskBackCheckBox->SetToolTip( _("If you want a solder mask layer for the back side of the board") );
bSizer24->Add( m_MaskBackCheckBox, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxALL, 5 );
m_panel21->SetSizer( bSizer24 );
......@@ -595,6 +641,8 @@ DIALOG_LAYERS_SETUP_BASE::DIALOG_LAYERS_SETUP_BASE( wxWindow* parent, wxWindowID
m_SilkSBackCheckBox = new wxCheckBox( m_panel22, ID_SILKSBACKCHECKBOX, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
m_SilkSBackCheckBox->SetToolTip( _("If you want a silk screen layer for the back side of the board") );
bSizer25->Add( m_SilkSBackCheckBox, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxALL, 5 );
m_panel22->SetSizer( bSizer25 );
......@@ -618,6 +666,8 @@ DIALOG_LAYERS_SETUP_BASE::DIALOG_LAYERS_SETUP_BASE( wxWindow* parent, wxWindowID
m_SoldPBackCheckBox = new wxCheckBox( m_panel23, ID_SOLDPBACKCHECKBOX, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
m_SoldPBackCheckBox->SetToolTip( _("If you want a solder paste layer for the back side of the board") );
bSizer26->Add( m_SoldPBackCheckBox, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxALL, 5 );
m_panel23->SetSizer( bSizer26 );
......@@ -641,6 +691,8 @@ DIALOG_LAYERS_SETUP_BASE::DIALOG_LAYERS_SETUP_BASE( wxWindow* parent, wxWindowID
m_AdhesBackCheckBox = new wxCheckBox( m_panel24, ID_ADHESBACKCHECKBOX, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
m_AdhesBackCheckBox->SetToolTip( _("If you want an adhesive layer for the back side of the board") );
bSizer27->Add( m_AdhesBackCheckBox, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxALL, 5 );
m_panel24->SetSizer( bSizer27 );
......@@ -664,6 +716,8 @@ DIALOG_LAYERS_SETUP_BASE::DIALOG_LAYERS_SETUP_BASE( wxWindow* parent, wxWindowID
m_PCBEdgesCheckBox = new wxCheckBox( m_panel25, ID_PCBEDGESCHECKBOX, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
m_PCBEdgesCheckBox->SetToolTip( _("If you want a board perimeter layer") );
bSizer28->Add( m_PCBEdgesCheckBox, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxALL, 5 );
m_panel25->SetSizer( bSizer28 );
......@@ -733,6 +787,8 @@ DIALOG_LAYERS_SETUP_BASE::DIALOG_LAYERS_SETUP_BASE( wxWindow* parent, wxWindowID
m_CommentsCheckBox = new wxCheckBox( m_panel28, ID_COMMENTSCHECKBOX, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
m_CommentsCheckBox->SetToolTip( _("If you want a separate layer for comments or notes") );
bSizer31->Add( m_CommentsCheckBox, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxALL, 5 );
m_panel28->SetSizer( bSizer31 );
......@@ -756,6 +812,8 @@ DIALOG_LAYERS_SETUP_BASE::DIALOG_LAYERS_SETUP_BASE( wxWindow* parent, wxWindowID
m_DrawingsCheckBox = new wxCheckBox( m_panel29, ID_DRAWINGSCHECKBOX, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
m_DrawingsCheckBox->SetToolTip( _("If you want a layer for documentation drawings") );
bSizer32->Add( m_DrawingsCheckBox, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxALL, 5 );
m_panel29->SetSizer( bSizer32 );
......
pcbnew/dialog_layers_setup_base.fbp
View file @ b275d34d
......@@ -29,7 +29,7 @@
<property name="hidden">0</property>
<property name="id">wxID_ANY</property>
<property name="maximum_size"></property>
<property name="minimum_size">600,600</property>
<property name="minimum_size">550,600</property>
<property name="name">DIALOG_LAYERS_SETUP_BASE</property>
<property name="pos"></property>
<property name="size">-1,-1</property>
......@@ -887,7 +887,7 @@
<property name="size"></property>
<property name="style"></property>
<property name="subclass"></property>
<property name="tooltip"></property>
<property name="tooltip">If you want a silk screen layer for the front side of the board</property>
<property name="window_extra_style"></property>
<property name="window_name"></property>
<property name="window_style"></property>
......@@ -1095,7 +1095,7 @@
<property name="size"></property>
<property name="style"></property>
<property name="subclass"></property>
<property name="tooltip"></property>
<property name="tooltip">If you want a solder mask layer for the front of the board</property>
<property name="window_extra_style"></property>
<property name="window_name"></property>
<property name="window_style"></property>
......@@ -1200,7 +1200,7 @@
<property name="size"></property>
<property name="style"></property>
<property name="subclass"></property>
<property name="tooltip"></property>
<property name="tooltip">Layer name of front (top) copper layer</property>
<property name="value">Front_later</property>
<property name="window_extra_style"></property>
<property name="window_name"></property>
......@@ -1307,7 +1307,7 @@
<property name="size"></property>
<property name="style"></property>
<property name="subclass"></property>
<property name="tooltip"></property>
<property name="tooltip">If you want a front copper layer</property>
<property name="window_extra_style"></property>
<property name="window_name"></property>
<property name="window_style"></property>
......@@ -1361,7 +1361,7 @@
<property name="selection">0</property>
<property name="size"></property>
<property name="subclass"></property>
<property name="tooltip"></property>
<property name="tooltip">Copper layer type for Freerouter. Power layers are removed from Freerouter&apos;s layer menus.</property>
<property name="window_extra_style"></property>
<property name="window_name"></property>
<property name="window_style"></property>
......@@ -1573,7 +1573,7 @@
<property name="selection">0</property>
<property name="size"></property>
<property name="subclass"></property>
<property name="tooltip"></property>
<property name="tooltip">Copper layer type for Freerouter. Power layers are removed from Freerouter&apos;s layer menus.</property>
<property name="window_extra_style"></property>
<property name="window_name"></property>
<property name="window_style"></property>
......@@ -1785,7 +1785,7 @@
<property name="selection">0</property>
<property name="size"></property>
<property name="subclass"></property>
<property name="tooltip"></property>
<property name="tooltip">Copper layer type for Freerouter. Power layers are removed from Freerouter&apos;s layer menus.</property>
<property name="window_extra_style"></property>
<property name="window_name"></property>
<property name="window_style"></property>
......@@ -1997,7 +1997,7 @@
<property name="selection">0</property>
<property name="size"></property>
<property name="subclass"></property>
<property name="tooltip"></property>
<property name="tooltip">Copper layer type for Freerouter. Power layers are removed from Freerouter&apos;s layer menus.</property>
<property name="window_extra_style"></property>
<property name="window_name"></property>
<property name="window_style"></property>
......@@ -2209,7 +2209,7 @@
<property name="selection">0</property>
<property name="size"></property>
<property name="subclass"></property>
<property name="tooltip"></property>
<property name="tooltip">Copper layer type for Freerouter. Power layers are removed from Freerouter&apos;s layer menus.</property>
<property name="window_extra_style"></property>
<property name="window_name"></property>
<property name="window_style"></property>
......@@ -2421,7 +2421,7 @@
<property name="selection">0</property>
<property name="size"></property>
<property name="subclass"></property>
<property name="tooltip"></property>
<property name="tooltip">Copper layer type for Freerouter. Power layers are removed from Freerouter&apos;s layer menus.</property>
<property name="window_extra_style"></property>
<property name="window_name"></property>
<property name="window_style"></property>
......@@ -2633,7 +2633,7 @@
<property name="selection">0</property>
<property name="size"></property>
<property name="subclass"></property>
<property name="tooltip"></property>
<property name="tooltip">Copper layer type for Freerouter. Power layers are removed from Freerouter&apos;s layer menus.</property>
<property name="window_extra_style"></property>
<property name="window_name"></property>
<property name="window_style"></property>
......@@ -2845,7 +2845,7 @@
<property name="selection">0</property>
<property name="size"></property>
<property name="subclass"></property>
<property name="tooltip"></property>
<property name="tooltip">Copper layer type for Freerouter. Power layers are removed from Freerouter&apos;s layer menus.</property>
<property name="window_extra_style"></property>
<property name="window_name"></property>
<property name="window_style"></property>
......@@ -3057,7 +3057,7 @@
<property name="selection">0</property>
<property name="size"></property>
<property name="subclass"></property>
<property name="tooltip"></property>
<property name="tooltip">Copper layer type for Freerouter. Power layers are removed from Freerouter&apos;s layer menus.</property>
<property name="window_extra_style"></property>
<property name="window_name"></property>
<property name="window_style"></property>
......@@ -3269,7 +3269,7 @@
<property name="selection">0</property>
<property name="size"></property>
<property name="subclass"></property>
<property name="tooltip"></property>
<property name="tooltip">Copper layer type for Freerouter. Power layers are removed from Freerouter&apos;s layer menus.</property>
<property name="window_extra_style"></property>
<property name="window_name"></property>
<property name="window_style"></property>
......@@ -3481,7 +3481,7 @@
<property name="selection">0</property>
<property name="size"></property>
<property name="subclass"></property>
<property name="tooltip"></property>
<property name="tooltip">Copper layer type for Freerouter. Power layers are removed from Freerouter&apos;s layer menus.</property>
<property name="window_extra_style"></property>
<property name="window_name"></property>
<property name="window_style"></property>
......@@ -3693,7 +3693,7 @@
<property name="selection">0</property>
<property name="size"></property>
<property name="subclass"></property>
<property name="tooltip"></property>
<property name="tooltip">Copper layer type for Freerouter. Power layers are removed from Freerouter&apos;s layer menus.</property>
<property name="window_extra_style"></property>
<property name="window_name"></property>
<property name="window_style"></property>
......@@ -3905,7 +3905,7 @@
<property name="selection">0</property>
<property name="size"></property>
<property name="subclass"></property>
<property name="tooltip"></property>
<property name="tooltip">Copper layer type for Freerouter. Power layers are removed from Freerouter&apos;s layer menus.</property>
<property name="window_extra_style"></property>
<property name="window_name"></property>
<property name="window_style"></property>
......@@ -4117,7 +4117,7 @@
<property name="selection">0</property>
<property name="size"></property>
<property name="subclass"></property>
<property name="tooltip"></property>
<property name="tooltip">Copper layer type for Freerouter. Power layers are removed from Freerouter&apos;s layer menus.</property>
<property name="window_extra_style"></property>
<property name="window_name"></property>
<property name="window_style"></property>
......@@ -4329,7 +4329,7 @@
<property name="selection">0</property>
<property name="size"></property>
<property name="subclass"></property>
<property name="tooltip"></property>
<property name="tooltip">Copper layer type for Freerouter. Power layers are removed from Freerouter&apos;s layer menus.</property>
<property name="window_extra_style"></property>
<property name="window_name"></property>
<property name="window_style"></property>
......@@ -4380,7 +4380,7 @@
<property name="size"></property>
<property name="style"></property>
<property name="subclass"></property>
<property name="tooltip"></property>
<property name="tooltip">Layer name of back (bottom) copper layer</property>
<property name="value">Back</property>
<property name="window_extra_style"></property>
<property name="window_name"></property>
......@@ -4487,7 +4487,7 @@
<property name="size"></property>
<property name="style"></property>
<property name="subclass"></property>
<property name="tooltip"></property>
<property name="tooltip">If you want a back copper layer</property>
<property name="window_extra_style"></property>
<property name="window_name"></property>
<property name="window_style"></property>
......@@ -4541,7 +4541,7 @@
<property name="selection">0</property>
<property name="size"></property>
<property name="subclass"></property>
<property name="tooltip"></property>
<property name="tooltip">Copper layer type for Freerouter. Power layers are removed from Freerouter&apos;s layer menus.</property>
<property name="window_extra_style"></property>
<property name="window_name"></property>
<property name="window_style"></property>
......@@ -4695,7 +4695,7 @@
<property name="size"></property>
<property name="style"></property>
<property name="subclass"></property>
<property name="tooltip"></property>
<property name="tooltip">If you want a solder mask layer for the back side of the board</property>
<property name="window_extra_style"></property>
<property name="window_name"></property>
<property name="window_style"></property>
......@@ -4903,7 +4903,7 @@
<property name="size"></property>
<property name="style"></property>
<property name="subclass"></property>
<property name="tooltip"></property>
<property name="tooltip">If you want a silk screen layer for the back side of the board</property>
<property name="window_extra_style"></property>
<property name="window_name"></property>
<property name="window_style"></property>
......@@ -5111,7 +5111,7 @@
<property name="size"></property>
<property name="style"></property>
<property name="subclass"></property>
<property name="tooltip"></property>
<property name="tooltip">If you want a solder paste layer for the back side of the board</property>
<property name="window_extra_style"></property>
<property name="window_name"></property>
<property name="window_style"></property>
......@@ -5319,7 +5319,7 @@
<property name="size"></property>
<property name="style"></property>
<property name="subclass"></property>
<property name="tooltip"></property>
<property name="tooltip">If you want an adhesive layer for the back side of the board</property>
<property name="window_extra_style"></property>
<property name="window_name"></property>
<property name="window_style"></property>
......@@ -5527,7 +5527,7 @@
<property name="size"></property>
<property name="style"></property>
<property name="subclass"></property>
<property name="tooltip"></property>
<property name="tooltip">If you want a board perimeter layer</property>
<property name="window_extra_style"></property>
<property name="window_name"></property>
<property name="window_style"></property>
......@@ -6151,7 +6151,7 @@
<property name="size"></property>
<property name="style"></property>
<property name="subclass"></property>
<property name="tooltip"></property>
<property name="tooltip">If you want a separate layer for comments or notes</property>
<property name="window_extra_style"></property>
<property name="window_name"></property>
<property name="window_style"></property>
......@@ -6359,7 +6359,7 @@
<property name="size"></property>
<property name="style"></property>
<property name="subclass"></property>
<property name="tooltip"></property>
<property name="tooltip">If you want a layer for documentation drawings</property>
<property name="window_extra_style"></property>
<property name="window_name"></property>
<property name="window_style"></property>
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment