Commit b1cd42cf authored by jean-pierre charras's avatar jean-pierre charras

Pcbnew: simplify draw code in default canvas and plot functions by removing...

Pcbnew: simplify draw code in  default canvas and plot functions by removing the plot LINE option, which is not existing in all plotters, not existing in opengl/cairo canvas, and not usefull in default canvas.
parent 2ff623dc
......@@ -433,19 +433,16 @@ void PLOTTER::sketchOval( const wxPoint& pos, const wxSize& aSize, double orient
void PLOTTER::ThickSegment( const wxPoint& start, const wxPoint& end, int width,
EDA_DRAW_MODE_T tracemode )
{
switch( tracemode )
if( tracemode == FILLED )
{
case FILLED:
case LINE:
SetCurrentLineWidth( tracemode==FILLED ? width : -1 );
SetCurrentLineWidth( width );
MoveTo( start );
FinishTo( end );
break;
case SKETCH:
}
else
{
SetCurrentLineWidth( -1 );
segmentAsOval( start, end, width, tracemode );
break;
}
}
......@@ -453,24 +450,15 @@ void PLOTTER::ThickSegment( const wxPoint& start, const wxPoint& end, int width,
void PLOTTER::ThickArc( const wxPoint& centre, double StAngle, double EndAngle,
int radius, int width, EDA_DRAW_MODE_T tracemode )
{
switch( tracemode )
{
case LINE:
SetCurrentLineWidth( -1 );
Arc( centre, StAngle, EndAngle, radius, NO_FILL, -1 );
break;
case FILLED:
if( tracemode == FILLED )
Arc( centre, StAngle, EndAngle, radius, NO_FILL, width );
break;
case SKETCH:
else
{
SetCurrentLineWidth( -1 );
Arc( centre, StAngle, EndAngle,
radius - ( width - currentPenWidth ) / 2, NO_FILL, -1 );
Arc( centre, StAngle, EndAngle,
radius + ( width - currentPenWidth ) / 2, NO_FILL, -1 );
break;
}
}
......@@ -478,17 +466,10 @@ void PLOTTER::ThickArc( const wxPoint& centre, double StAngle, double EndAngle,
void PLOTTER::ThickRect( const wxPoint& p1, const wxPoint& p2, int width,
EDA_DRAW_MODE_T tracemode )
{
switch( tracemode )
{
case LINE:
Rect( p1, p2, NO_FILL, -1 );
break;
case FILLED:
if( tracemode == FILLED )
Rect( p1, p2, NO_FILL, width );
break;
case SKETCH:
else
{
SetCurrentLineWidth( -1 );
wxPoint offsetp1( p1.x - (width - currentPenWidth) / 2,
p1.y - (width - currentPenWidth) / 2 );
......@@ -500,28 +481,19 @@ void PLOTTER::ThickRect( const wxPoint& p1, const wxPoint& p2, int width,
offsetp2.x -= (width - currentPenWidth);
offsetp2.y -= (width - currentPenWidth);
Rect( offsetp1, offsetp2, NO_FILL, -1 );
break;
}
}
void PLOTTER::ThickCircle( const wxPoint& pos, int diametre, int width, EDA_DRAW_MODE_T tracemode )
{
switch( tracemode )
{
case LINE:
Circle( pos, diametre, NO_FILL, -1 );
break;
case FILLED:
if( tracemode == FILLED )
Circle( pos, diametre, NO_FILL, width );
break;
case SKETCH:
else
{
SetCurrentLineWidth( -1 );
Circle( pos, diametre - width + currentPenWidth, NO_FILL, -1 );
Circle( pos, diametre + width - currentPenWidth, NO_FILL, -1 );
break;
}
}
......
......@@ -467,15 +467,7 @@ void DXF_PLOTTER::SetDash( bool dashed )
void DXF_PLOTTER::ThickSegment( const wxPoint& aStart, const wxPoint& aEnd, int aWidth,
EDA_DRAW_MODE_T aPlotMode )
{
if( aPlotMode == LINE ) // In line mode, just a line is OK
{
MoveTo( aStart );
FinishTo( aEnd );
}
else
{
segmentAsOval( aStart, aEnd, aWidth, aPlotMode );
}
}
/* Plot an arc in DXF format
......
......@@ -432,19 +432,16 @@ void GERBER_PLOTTER::FlashPadCircle( const wxPoint& pos, int diametre, EDA_DRAW_
wxASSERT( outputFile );
wxSize size( diametre, diametre );
switch( trace_mode )
if( trace_mode == SKETCH )
{
case LINE:
case SKETCH:
SetCurrentLineWidth( -1 );
Circle( pos, diametre - currentPenWidth, NO_FILL );
break;
case FILLED:
}
else
{
DPOINT pos_dev = userToDeviceCoordinates( pos );
selectAperture( size, APERTURE::Circle );
emitDcode( pos_dev, 3 );
break;
}
}
......@@ -519,23 +516,20 @@ void GERBER_PLOTTER::FlashPadRect( const wxPoint& pos, const wxSize& aSize,
// Pass through
case 0:
case 1800:
switch( trace_mode )
if( trace_mode == SKETCH )
{
case LINE:
case SKETCH:
SetCurrentLineWidth( -1 );
Rect( wxPoint( pos.x - (size.x - currentPenWidth) / 2,
pos.y - (size.y - currentPenWidth) / 2 ),
wxPoint( pos.x + (size.x - currentPenWidth) / 2,
pos.y + (size.y - currentPenWidth) / 2 ),
NO_FILL );
break;
case FILLED:
}
else
{
DPOINT pos_dev = userToDeviceCoordinates( pos );
selectAperture( size, APERTURE::Rect );
emitDcode( pos_dev, 3 );
break;
}
break;
......
......@@ -388,8 +388,8 @@ void HPGL_PLOTTER::ThickSegment( const wxPoint& start, const wxPoint& end,
wxPoint center;
wxSize size;
// Suppress overlap if pen is too big or in line mode
if( (penDiameter >= width) || (tracemode == LINE) )
// Suppress overlap if pen is too big
if( penDiameter >= width )
{
MoveTo( start );
FinishTo( end );
......@@ -491,15 +491,10 @@ void HPGL_PLOTTER::FlashPadCircle( const wxPoint& pos, int diametre,
int delta = KiROUND( penDiameter - penOverlap );
int radius = diametre / 2;
if( trace_mode != LINE )
{
radius = ( diametre - KiROUND( penDiameter ) ) / 2;
}
if( radius < 0 )
{
radius = 0;
}
double rsize = userToDeviceSize( radius );
......@@ -534,11 +529,8 @@ void HPGL_PLOTTER::FlashPadRect( const wxPoint& pos, const wxSize& padsize,
size.x = padsize.x / 2;
size.y = padsize.y / 2;
if( trace_mode != LINE )
{
size.x = (padsize.x - (int) penDiameter) / 2;
size.y = (padsize.y - (int) penDiameter) / 2;
}
if( size.x < 0 )
size.x = 0;
......
......@@ -346,9 +346,6 @@ void EDA_TEXT::drawOneLineOfText( EDA_RECT* aClipBox, wxDC* aDC,
{
int width = m_Thickness;
if( aFillMode == LINE )
width = 0;
if( aDrawMode != UNSPECIFIED_DRAWMODE )
GRSetDrawMode( aDC, aDrawMode );
......
......@@ -252,9 +252,9 @@ void DISPLAY_FOOTPRINTS_FRAME::OnUpdateTextDrawMode( wxUpdateUIEvent& aEvent )
wxString msgTextsFill[2] = { _( "Show texts in filled mode" ),
_( "Show texts in sketch mode" ) };
unsigned i = displ_opts->m_DisplayModText == SKETCH ? 0 : 1;
unsigned i = displ_opts->m_DisplayModTextFill == SKETCH ? 0 : 1;
aEvent.Check( displ_opts->m_DisplayModText == SKETCH );
aEvent.Check( displ_opts->m_DisplayModTextFill == SKETCH );
m_optionsToolBar->SetToolShortHelp( ID_TB_OPTIONS_SHOW_MODULE_TEXT_SKETCH, msgTextsFill[i] );
}
......@@ -267,9 +267,9 @@ void DISPLAY_FOOTPRINTS_FRAME::OnUpdateLineDrawMode( wxUpdateUIEvent& aEvent )
wxString msgEdgesFill[2] = { _( "Show outlines in filled mode" ),
_( "Show outlines in sketch mode" ) };
int i = displ_opts->m_DisplayModEdge == SKETCH ? 0 : 1;
int i = displ_opts->m_DisplayModEdgeFill == SKETCH ? 0 : 1;
aEvent.Check( displ_opts->m_DisplayModEdge == SKETCH );
aEvent.Check( displ_opts->m_DisplayModEdgeFill == SKETCH );
m_optionsToolBar->SetToolShortHelp( ID_TB_OPTIONS_SHOW_MODULE_EDGE_SKETCH, msgEdgesFill[i] );
}
......@@ -298,12 +298,12 @@ void DISPLAY_FOOTPRINTS_FRAME::OnSelectOptionToolbar( wxCommandEvent& event )
switch( id )
{
case ID_TB_OPTIONS_SHOW_MODULE_TEXT_SKETCH:
displ_opts->m_DisplayModText = displ_opts->m_DisplayModText == FILLED ? SKETCH : FILLED;
displ_opts->m_DisplayModTextFill = displ_opts->m_DisplayModTextFill == FILLED ? SKETCH : FILLED;
m_canvas->Refresh( );
break;
case ID_TB_OPTIONS_SHOW_MODULE_EDGE_SKETCH:
displ_opts->m_DisplayModEdge = displ_opts->m_DisplayModEdge == FILLED ? SKETCH : FILLED;
displ_opts->m_DisplayModEdgeFill = displ_opts->m_DisplayModEdgeFill == FILLED ? SKETCH : FILLED;
m_canvas->Refresh();
break;
......
......@@ -74,10 +74,10 @@ void DIALOG_FOOTPRINTS_DISPLAY_OPTIONS::initDialog()
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)m_Parent->GetDisplayOptions();
m_EdgesDisplayOption->SetSelection( displ_opts->m_DisplayModEdge );
m_TextDisplayOption->SetSelection( displ_opts->m_DisplayModText );
m_IsShowPadFill->SetValue( displ_opts->m_DisplayPadFill );
m_IsShowPadNum->SetValue( displ_opts->m_DisplayPadNum );
m_EdgesDisplayOption->SetValue( not displ_opts->m_DisplayModEdgeFill );
m_TextDisplayOption->SetValue( not displ_opts->m_DisplayModTextFill );
m_ShowPadSketch->SetValue( not displ_opts->m_DisplayPadFill );
m_ShowPadNum->SetValue( displ_opts->m_DisplayPadNum );
m_IsZoomNoCenter->SetValue( m_Parent->GetCanvas()->GetEnableZoomNoCenter() );
m_IsMiddleButtonPan->SetValue( m_Parent->GetCanvas()->GetEnableMiddleButtonPan() );
m_IsMiddleButtonPanLimited->SetValue( m_Parent->GetCanvas()->GetMiddleButtonPanLimited() );
......@@ -94,10 +94,10 @@ void DIALOG_FOOTPRINTS_DISPLAY_OPTIONS::UpdateObjectSettings( void )
{
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)m_Parent->GetDisplayOptions();
displ_opts->m_DisplayModEdge = m_EdgesDisplayOption->GetSelection();
displ_opts->m_DisplayModText = m_TextDisplayOption->GetSelection();
displ_opts->m_DisplayPadNum = m_IsShowPadNum->GetValue();
displ_opts->m_DisplayPadFill = m_IsShowPadFill->GetValue();
displ_opts->m_DisplayModEdgeFill = not m_EdgesDisplayOption->GetValue();
displ_opts->m_DisplayModTextFill = not m_TextDisplayOption->GetValue();
displ_opts->m_DisplayPadNum = m_ShowPadNum->GetValue();
displ_opts->m_DisplayPadFill = not m_ShowPadSketch->GetValue();
m_Parent->GetCanvas()->SetEnableZoomNoCenter( m_IsZoomNoCenter->GetValue() );
m_Parent->GetCanvas()->SetEnableMiddleButtonPan( m_IsMiddleButtonPan->GetValue() );
m_Parent->GetCanvas()->SetMiddleButtonPanLimited( m_IsMiddleButtonPanLimited->GetValue() );
......
///////////////////////////////////////////////////////////////////////////
// C++ code generated with wxFormBuilder (version Oct 8 2012)
// C++ code generated with wxFormBuilder (version Jun 5 2014)
// http://www.wxformbuilder.org/
//
// PLEASE DO "NOT" EDIT THIS FILE!
......@@ -19,38 +19,23 @@ DIALOG_FOOTPRINTS_DISPLAY_OPTIONS_BASE::DIALOG_FOOTPRINTS_DISPLAY_OPTIONS_BASE(
wxBoxSizer* bUpperSizer;
bUpperSizer = new wxBoxSizer( wxHORIZONTAL );
wxBoxSizer* bSizerLeft;
bSizerLeft = new wxBoxSizer( wxVERTICAL );
wxStaticBoxSizer* sbSizerDrawMode;
sbSizerDrawMode = new wxStaticBoxSizer( new wxStaticBox( this, wxID_ANY, _("Draw options") ), wxVERTICAL );
wxString m_EdgesDisplayOptionChoices[] = { _("Line"), _("Filled"), _("Sketch") };
int m_EdgesDisplayOptionNChoices = sizeof( m_EdgesDisplayOptionChoices ) / sizeof( wxString );
m_EdgesDisplayOption = new wxRadioBox( this, ID_EDGE_SELECT, _("Edges"), wxDefaultPosition, wxDefaultSize, m_EdgesDisplayOptionNChoices, m_EdgesDisplayOptionChoices, 1, wxRA_SPECIFY_COLS );
m_EdgesDisplayOption->SetSelection( 0 );
bSizerLeft->Add( m_EdgesDisplayOption, 1, wxALL|wxEXPAND, 5 );
m_EdgesDisplayOption = new wxCheckBox( this, wxID_ANY, _("Graphic items sketch mode"), wxDefaultPosition, wxDefaultSize, 0 );
sbSizerDrawMode->Add( m_EdgesDisplayOption, 0, wxALL, 5 );
wxString m_TextDisplayOptionChoices[] = { _("Line"), _("Filled"), _("Sketch") };
int m_TextDisplayOptionNChoices = sizeof( m_TextDisplayOptionChoices ) / sizeof( wxString );
m_TextDisplayOption = new wxRadioBox( this, ID_TEXT_SELECT, _("Text"), wxDefaultPosition, wxDefaultSize, m_TextDisplayOptionNChoices, m_TextDisplayOptionChoices, 1, wxRA_SPECIFY_COLS );
m_TextDisplayOption->SetSelection( 0 );
bSizerLeft->Add( m_TextDisplayOption, 1, wxALL|wxEXPAND, 5 );
m_TextDisplayOption = new wxCheckBox( this, wxID_ANY, _("Texts sketch mode"), wxDefaultPosition, wxDefaultSize, 0 );
sbSizerDrawMode->Add( m_TextDisplayOption, 0, wxALL, 5 );
m_ShowPadSketch = new wxCheckBox( this, ID_PADFILL_OPT, _("Pad sketch mode"), wxDefaultPosition, wxDefaultSize, 0 );
sbSizerDrawMode->Add( m_ShowPadSketch, 0, wxEXPAND|wxALL, 5 );
bUpperSizer->Add( bSizerLeft, 1, wxEXPAND, 5 );
m_ShowPadNum = new wxCheckBox( this, wxID_ANY, _("Show pad &number"), wxDefaultPosition, wxDefaultSize, 0 );
sbSizerDrawMode->Add( m_ShowPadNum, 0, wxALL|wxEXPAND, 5 );
wxBoxSizer* bSizerRight;
bSizerRight = new wxBoxSizer( wxVERTICAL );
wxStaticBoxSizer* sbSizerPads;
sbSizerPads = new wxStaticBoxSizer( new wxStaticBox( this, wxID_ANY, _("Pads") ), wxVERTICAL );
m_IsShowPadFill = new wxCheckBox( this, ID_PADFILL_OPT, _("Fill &pad"), wxDefaultPosition, wxDefaultSize, 0 );
sbSizerPads->Add( m_IsShowPadFill, 0, wxEXPAND|wxLEFT|wxRIGHT|wxTOP, 5 );
m_IsShowPadNum = new wxCheckBox( this, wxID_ANY, _("Show pad &number"), wxDefaultPosition, wxDefaultSize, 0 );
sbSizerPads->Add( m_IsShowPadNum, 0, wxALL|wxEXPAND, 5 );
bSizerRight->Add( sbSizerPads, 1, wxEXPAND|wxALL, 5 );
bUpperSizer->Add( sbSizerDrawMode, 1, wxEXPAND|wxALL, 5 );
wxStaticBoxSizer* sbSizerViewOpt;
sbSizerViewOpt = new wxStaticBoxSizer( new wxStaticBox( this, wxID_ANY, _("Pan and Zoom") ), wxVERTICAL );
......@@ -58,19 +43,16 @@ DIALOG_FOOTPRINTS_DISPLAY_OPTIONS_BASE::DIALOG_FOOTPRINTS_DISPLAY_OPTIONS_BASE(
m_IsZoomNoCenter = new wxCheckBox( this, wxID_ANY, _("Do not center and warp cusor on zoom"), wxDefaultPosition, wxDefaultSize, 0 );
m_IsZoomNoCenter->SetToolTip( _("Keep the cursor at its current location when zooming") );
sbSizerViewOpt->Add( m_IsZoomNoCenter, 0, wxEXPAND|wxLEFT|wxRIGHT|wxTOP, 5 );
sbSizerViewOpt->Add( m_IsZoomNoCenter, 0, wxEXPAND|wxALL, 5 );
m_IsMiddleButtonPan = new wxCheckBox( this, wxID_ANY, _("Use middle mouse button to pan"), wxDefaultPosition, wxDefaultSize, 0 );
sbSizerViewOpt->Add( m_IsMiddleButtonPan, 0, wxEXPAND|wxLEFT|wxRIGHT|wxTOP, 5 );
sbSizerViewOpt->Add( m_IsMiddleButtonPan, 0, wxEXPAND|wxALL, 5 );
m_IsMiddleButtonPanLimited = new wxCheckBox( this, wxID_ANY, _("Limit panning to scroll size"), wxDefaultPosition, wxDefaultSize, 0 );
sbSizerViewOpt->Add( m_IsMiddleButtonPanLimited, 0, wxALL|wxEXPAND, 5 );
bSizerRight->Add( sbSizerViewOpt, 1, wxALL|wxEXPAND, 5 );
bUpperSizer->Add( bSizerRight, 2, wxEXPAND, 5 );
bUpperSizer->Add( sbSizerViewOpt, 1, wxALL|wxEXPAND, 5 );
bSizerMain->Add( bUpperSizer, 1, wxEXPAND, 5 );
......@@ -92,7 +74,6 @@ DIALOG_FOOTPRINTS_DISPLAY_OPTIONS_BASE::DIALOG_FOOTPRINTS_DISPLAY_OPTIONS_BASE(
this->SetSizer( bSizerMain );
this->Layout();
bSizerMain->Fit( this );
// Connect Events
m_IsMiddleButtonPan->Connect( wxEVT_COMMAND_CHECKBOX_CLICKED, wxCommandEventHandler( DIALOG_FOOTPRINTS_DISPLAY_OPTIONS_BASE::OnMiddleBtnPanEnbl ), NULL, this );
......
///////////////////////////////////////////////////////////////////////////
// C++ code generated with wxFormBuilder (version Oct 8 2012)
// C++ code generated with wxFormBuilder (version Jun 5 2014)
// http://www.wxformbuilder.org/
//
// PLEASE DO "NOT" EDIT THIS FILE!
......@@ -15,13 +15,12 @@ class DIALOG_SHIM;
#include "dialog_shim.h"
#include <wx/string.h>
#include <wx/radiobox.h>
#include <wx/checkbox.h>
#include <wx/gdicmn.h>
#include <wx/font.h>
#include <wx/colour.h>
#include <wx/settings.h>
#include <wx/sizer.h>
#include <wx/checkbox.h>
#include <wx/statbox.h>
#include <wx/statline.h>
#include <wx/button.h>
......@@ -29,9 +28,7 @@ class DIALOG_SHIM;
///////////////////////////////////////////////////////////////////////////
#define ID_EDGE_SELECT 1000
#define ID_TEXT_SELECT 1001
#define ID_PADFILL_OPT 1002
#define ID_PADFILL_OPT 1000
///////////////////////////////////////////////////////////////////////////////
/// Class DIALOG_FOOTPRINTS_DISPLAY_OPTIONS_BASE
......@@ -41,10 +38,10 @@ class DIALOG_FOOTPRINTS_DISPLAY_OPTIONS_BASE : public DIALOG_SHIM
private:
protected:
wxRadioBox* m_EdgesDisplayOption;
wxRadioBox* m_TextDisplayOption;
wxCheckBox* m_IsShowPadFill;
wxCheckBox* m_IsShowPadNum;
wxCheckBox* m_EdgesDisplayOption;
wxCheckBox* m_TextDisplayOption;
wxCheckBox* m_ShowPadSketch;
wxCheckBox* m_ShowPadNum;
wxCheckBox* m_IsZoomNoCenter;
wxCheckBox* m_IsMiddleButtonPan;
wxCheckBox* m_IsMiddleButtonPanLimited;
......@@ -63,7 +60,7 @@ class DIALOG_FOOTPRINTS_DISPLAY_OPTIONS_BASE : public DIALOG_SHIM
public:
DIALOG_FOOTPRINTS_DISPLAY_OPTIONS_BASE( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("Display Options"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxSize( -1,-1 ), long style = wxDEFAULT_DIALOG_STYLE|wxRESIZE_BORDER );
DIALOG_FOOTPRINTS_DISPLAY_OPTIONS_BASE( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("Display Options"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxSize( 425,206 ), long style = wxDEFAULT_DIALOG_STYLE|wxRESIZE_BORDER );
~DIALOG_FOOTPRINTS_DISPLAY_OPTIONS_BASE();
};
......
......@@ -52,11 +52,10 @@ enum EDA_TEXT_VJUSTIFY_T {
};
/* Options to show solid segments (segments, texts...) */
/* Options to draw items with thickness ( segments, arcs, circles, texts...) */
enum EDA_DRAW_MODE_T {
LINE = 0, // segments are drawn as lines
FILLED, // normal mode: segments have thickness
SKETCH // sketch mode: segments have thickness, but are not filled
FILLED = true, // normal mode: solid segments
SKETCH = false // sketch mode: draw segments outlines only
};
......@@ -199,12 +198,12 @@ public:
* @param aOffset = draw offset (usually (0,0))
* @param aColor = text color
* @param aDrawMode = GR_OR, GR_XOR.., -1 to use the current mode.
* @param aDisplay_mode = LINE, FILLED or SKETCH
* @param aDisplay_mode = FILLED or SKETCH
* @param aAnchor_color = anchor color ( UNSPECIFIED_COLOR = do not draw anchor ).
*/
void Draw( EDA_RECT* aClipBox, wxDC* aDC,
const wxPoint& aOffset, EDA_COLOR_T aColor,
GR_DRAWMODE aDrawMode, EDA_DRAW_MODE_T aDisplay_mode = LINE,
GR_DRAWMODE aDrawMode, EDA_DRAW_MODE_T aDisplay_mode = FILLED,
EDA_COLOR_T aAnchor_color = EDA_COLOR_T(UNSPECIFIED_COLOR) );
/**
......@@ -318,7 +317,7 @@ private:
* @param aOffset = draw offset (usually (0,0))
* @param aColor = text color
* @param aDrawMode = GR_OR, GR_XOR.., -1 to use the current mode.
* @param aFillMode = LINE, FILLED or SKETCH
* @param aFillMode = FILLED or SKETCH
* @param aText = the single line of text to draw.
* @param aPos = the position of this line ).
*/
......
......@@ -75,8 +75,8 @@ public:
bool m_DisplayViaFill;
bool m_DisplayPadNum; // show pads numbers
bool m_DisplayPadIsol;
int m_DisplayModEdge; // How to display module drawings (line/ filled / sketch)
int m_DisplayModText; // How to display module texts (line/ filled / sketch)
bool m_DisplayModEdgeFill; // How to display module drawings ( sketch/ filled )
bool m_DisplayModTextFill; // How to display module texts ( sketch/ filled )
bool m_DisplayPcbTrackFill; // false : tracks are show in sketch mode, true = filled.
/// How trace clearances are displayed. @see TRACE_CLEARANCE_DISPLAY_MODE_T.
......@@ -94,7 +94,7 @@ public:
* 3 show netnames on tracks and pads
*/
int m_DisplayDrawItems;
bool m_DisplayDrawItemsFill; // How to display graphic items on board ( sketch/ filled )
bool m_ContrastModeDisplay;
int m_MaxLinksShowed; // in track creation: number of hairwires shown
bool m_Show_Module_Ratsnest; // When moving a footprint: allows displaying a ratsnest
......
......@@ -367,9 +367,6 @@ public:
* to define a configuration setting that needs to be loaded at run time,
* this is the place to define it.
*
* @todo: Define the configuration variables as member variables instead of
* global variables or move them to the object class where they are
* used.
* @return - Reference to the list of applications settings.
*/
PARAM_CFG_ARRAY& GetConfigurationSettings();
......
......@@ -753,20 +753,14 @@ void PCB_BASE_FRAME::LoadSettings( wxConfigBase* aCfg )
aCfg->Read( m_FrameName + DisplayPadFillEntry, &m_DisplayOptions.m_DisplayPadFill, true );
aCfg->Read( m_FrameName + DisplayViaFillEntry, &m_DisplayOptions.m_DisplayViaFill, true );
aCfg->Read( m_FrameName + DisplayPadNumberEntry, &m_DisplayOptions.m_DisplayPadNum, true );
aCfg->Read( m_FrameName + DisplayModuleEdgeEntry, &m_DisplayOptions.m_DisplayModEdge, ( long )FILLED );
aCfg->Read( m_FrameName + DisplayModuleEdgeEntry, &m_DisplayOptions.m_DisplayModEdgeFill, true );
aCfg->Read( m_FrameName + FastGrid1Entry, &itmp, ( long )0);
m_FastGrid1 = itmp;
aCfg->Read( m_FrameName + FastGrid2Entry, &itmp, ( long )0);
m_FastGrid2 = itmp;
if( m_DisplayOptions.m_DisplayModEdge < LINE || m_DisplayOptions.m_DisplayModEdge > SKETCH )
m_DisplayOptions.m_DisplayModEdge = FILLED;
aCfg->Read( m_FrameName + DisplayModuleTextEntry, &m_DisplayOptions.m_DisplayModText, ( long )FILLED );
if( m_DisplayOptions.m_DisplayModText < LINE || m_DisplayOptions.m_DisplayModText > SKETCH )
m_DisplayOptions.m_DisplayModText = FILLED;
aCfg->Read( m_FrameName + DisplayModuleTextEntry, &m_DisplayOptions.m_DisplayModTextFill, true );
}
......@@ -780,8 +774,8 @@ void PCB_BASE_FRAME::SaveSettings( wxConfigBase* aCfg )
aCfg->Write( m_FrameName + DisplayPadFillEntry, m_DisplayOptions.m_DisplayPadFill );
aCfg->Write( m_FrameName + DisplayViaFillEntry, m_DisplayOptions.m_DisplayViaFill );
aCfg->Write( m_FrameName + DisplayPadNumberEntry, m_DisplayOptions.m_DisplayPadNum );
aCfg->Write( m_FrameName + DisplayModuleEdgeEntry, ( long )m_DisplayOptions.m_DisplayModEdge );
aCfg->Write( m_FrameName + DisplayModuleTextEntry, ( long )m_DisplayOptions.m_DisplayModText );
aCfg->Write( m_FrameName + DisplayModuleEdgeEntry, m_DisplayOptions.m_DisplayModEdgeFill );
aCfg->Write( m_FrameName + DisplayModuleTextEntry, m_DisplayOptions.m_DisplayModTextFill );
aCfg->Write( m_FrameName + FastGrid1Entry, ( long )m_FastGrid1 );
aCfg->Write( m_FrameName + FastGrid2Entry, ( long )m_FastGrid2 );
}
......
......@@ -334,7 +334,6 @@ void DIMENSION::AdjustDimensionDetails( bool aDoNotChangeText )
void DIMENSION::Draw( EDA_DRAW_PANEL* panel, wxDC* DC, GR_DRAWMODE mode_color,
const wxPoint& offset )
{
int typeaff, width;
EDA_COLOR_T gcolor;
BOARD* brd = GetBoard();
......@@ -347,18 +346,11 @@ void DIMENSION::Draw( EDA_DRAW_PANEL* panel, wxDC* DC, GR_DRAWMODE mode_color,
GRSetDrawMode( DC, mode_color );
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)panel->GetDisplayOptions();
typeaff = displ_opts ? displ_opts->m_DisplayDrawItems : FILLED;
width = m_Width;
bool filled = displ_opts ? displ_opts->m_DisplayDrawItemsFill : FILLED;
int width = m_Width;
if( DC->LogicalToDeviceXRel( width ) <= MIN_DRAW_WIDTH )
typeaff = LINE;
switch( typeaff )
if( filled )
{
case LINE:
width = 0;
case FILLED:
GRLine( panel->GetClipBox(), DC, m_crossBarO + offset,
m_crossBarF + offset, width, gcolor );
GRLine( panel->GetClipBox(), DC, m_featureLineGO + offset,
......@@ -373,9 +365,9 @@ void DIMENSION::Draw( EDA_DRAW_PANEL* panel, wxDC* DC, GR_DRAWMODE mode_color,
m_arrowG1F + offset, width, gcolor );
GRLine( panel->GetClipBox(), DC, m_crossBarO + offset,
m_arrowG2F + offset, width, gcolor );
break;
case SKETCH:
}
else
{
GRCSegm( panel->GetClipBox(), DC, m_crossBarO + offset,
m_crossBarF + offset, width, gcolor );
GRCSegm( panel->GetClipBox(), DC, m_featureLineGO + offset,
......@@ -390,7 +382,6 @@ void DIMENSION::Draw( EDA_DRAW_PANEL* panel, wxDC* DC, GR_DRAWMODE mode_color,
m_arrowG1F + offset, width, gcolor );
GRCSegm( panel->GetClipBox(), DC, m_crossBarO + offset,
m_arrowG2F + offset, width, gcolor );
break;
}
}
......
......@@ -170,7 +170,6 @@ void DRAWSEGMENT::Draw( EDA_DRAW_PANEL* panel, wxDC* DC, GR_DRAWMODE draw_mode,
{
int ux0, uy0, dx, dy;
int l_trace;
int mode;
int radius;
LAYER_ID curr_layer = ( (PCB_SCREEN*) panel->GetScreen() )->m_Active_Layer;
......@@ -202,32 +201,25 @@ void DRAWSEGMENT::Draw( EDA_DRAW_PANEL* panel, wxDC* DC, GR_DRAWMODE draw_mode,
dx = m_End.x + aOffset.x;
dy = m_End.y + aOffset.y;
mode = displ_opts ? displ_opts->m_DisplayDrawItems : FILLED;
bool filled = displ_opts ? displ_opts->m_DisplayDrawItemsFill : FILLED;
if( m_Flags & FORCE_SKETCH )
mode = SKETCH;
if( DC->LogicalToDeviceXRel( l_trace ) <= MIN_DRAW_WIDTH )
mode = LINE;
filled = SKETCH;
switch( m_Shape )
{
case S_CIRCLE:
radius = KiROUND( Distance( ux0, uy0, dx, dy ) );
if( mode == LINE )
if( filled )
{
GRCircle( panel->GetClipBox(), DC, ux0, uy0, radius, color );
GRCircle( panel->GetClipBox(), DC, ux0, uy0, radius, m_Width, color );
}
else if( mode == SKETCH )
else
{
GRCircle( panel->GetClipBox(), DC, ux0, uy0, radius - l_trace, color );
GRCircle( panel->GetClipBox(), DC, ux0, uy0, radius + l_trace, color );
}
else
{
GRCircle( panel->GetClipBox(), DC, ux0, uy0, radius, m_Width, color );
}
break;
......@@ -248,22 +240,19 @@ void DRAWSEGMENT::Draw( EDA_DRAW_PANEL* panel, wxDC* DC, GR_DRAWMODE draw_mode,
EXCHG( StAngle, EndAngle );
}
if( mode == LINE )
if( filled )
{
GRArc( panel->GetClipBox(), DC, ux0, uy0, StAngle, EndAngle, radius, color );
GRArc( panel->GetClipBox(), DC, ux0, uy0, StAngle, EndAngle,
radius, m_Width, color );
}
else if( mode == SKETCH )
else
{
GRArc( panel->GetClipBox(), DC, ux0, uy0, StAngle, EndAngle,
radius - l_trace, color );
GRArc( panel->GetClipBox(), DC, ux0, uy0, StAngle, EndAngle,
radius + l_trace, color );
}
else
{
GRArc( panel->GetClipBox(), DC, ux0, uy0, StAngle, EndAngle,
radius, m_Width, color );
}
break;
case S_CURVE:
......@@ -271,23 +260,16 @@ void DRAWSEGMENT::Draw( EDA_DRAW_PANEL* panel, wxDC* DC, GR_DRAWMODE draw_mode,
for( unsigned int i=1; i < m_BezierPoints.size(); i++ )
{
if( mode == LINE )
{
GRLine( panel->GetClipBox(), DC,
m_BezierPoints[i].x, m_BezierPoints[i].y,
m_BezierPoints[i-1].x, m_BezierPoints[i-1].y, 0,
color );
}
else if( mode == SKETCH )
if( filled )
{
GRCSegm( panel->GetClipBox(), DC,
GRFillCSegm( panel->GetClipBox(), DC,
m_BezierPoints[i].x, m_BezierPoints[i].y,
m_BezierPoints[i-1].x, m_BezierPoints[i-1].y,
m_Width, color );
}
else
{
GRFillCSegm( panel->GetClipBox(), DC,
GRCSegm( panel->GetClipBox(), DC,
m_BezierPoints[i].x, m_BezierPoints[i].y,
m_BezierPoints[i-1].x, m_BezierPoints[i-1].y,
m_Width, color );
......@@ -297,17 +279,13 @@ void DRAWSEGMENT::Draw( EDA_DRAW_PANEL* panel, wxDC* DC, GR_DRAWMODE draw_mode,
break;
default:
if( mode == LINE )
{
GRLine( panel->GetClipBox(), DC, ux0, uy0, dx, dy, 0, color );
}
else if( mode == SKETCH )
if( filled )
{
GRCSegm( panel->GetClipBox(), DC, ux0, uy0, dx, dy, m_Width, color );
GRFillCSegm( panel->GetClipBox(), DC, ux0, uy0, dx, dy, m_Width, color );
}
else
{
GRFillCSegm( panel->GetClipBox(), DC, ux0, uy0, dx, dy, m_Width, color );
GRCSegm( panel->GetClipBox(), DC, ux0, uy0, dx, dy, m_Width, color );
}
break;
......
......@@ -130,7 +130,6 @@ void EDGE_MODULE::Draw( EDA_DRAW_PANEL* panel, wxDC* DC, GR_DRAWMODE draw_mode,
const wxPoint& offset )
{
int ux0, uy0, dx, dy, radius, StAngle, EndAngle;
int typeaff;
LAYER_ID curr_layer = ( (PCB_SCREEN*) panel->GetScreen() )->m_Active_Layer;
MODULE* module = (MODULE*) m_Parent;
......@@ -159,25 +158,15 @@ void EDGE_MODULE::Draw( EDA_DRAW_PANEL* panel, wxDC* DC, GR_DRAWMODE draw_mode,
dy = m_End.y - offset.y;
GRSetDrawMode( DC, draw_mode );
typeaff = displ_opts ? displ_opts->m_DisplayModEdge : FILLED;
bool filled = displ_opts ? displ_opts->m_DisplayModEdgeFill : FILLED;
if( IsCopperLayer( m_Layer ) )
{
typeaff = displ_opts ? displ_opts->m_DisplayPcbTrackFill : FILLED;
if( !typeaff )
typeaff = SKETCH;
}
if( DC->LogicalToDeviceXRel( m_Width ) <= MIN_DRAW_WIDTH )
typeaff = LINE;
filled = displ_opts ? displ_opts->m_DisplayPcbTrackFill : FILLED;
switch( m_Shape )
{
case S_SEGMENT:
if( typeaff == LINE )
GRLine( panel->GetClipBox(), DC, ux0, uy0, dx, dy, 0, color );
else if( typeaff == FILLED )
if( filled )
GRLine( panel->GetClipBox(), DC, ux0, uy0, dx, dy, m_Width, color );
else
// SKETCH Mode
......@@ -188,13 +177,7 @@ void EDGE_MODULE::Draw( EDA_DRAW_PANEL* panel, wxDC* DC, GR_DRAWMODE draw_mode,
case S_CIRCLE:
radius = KiROUND( Distance( ux0, uy0, dx, dy ) );
if( typeaff == LINE )
{
GRCircle( panel->GetClipBox(), DC, ux0, uy0, radius, color );
}
else
{
if( typeaff == FILLED )
if( filled )
{
GRCircle( panel->GetClipBox(), DC, ux0, uy0, radius, m_Width, color );
}
......@@ -203,7 +186,6 @@ void EDGE_MODULE::Draw( EDA_DRAW_PANEL* panel, wxDC* DC, GR_DRAWMODE draw_mode,
GRCircle( panel->GetClipBox(), DC, ux0, uy0, radius + (m_Width / 2), color );
GRCircle( panel->GetClipBox(), DC, ux0, uy0, radius - (m_Width / 2), color );
}
}
break;
......@@ -223,11 +205,7 @@ void EDGE_MODULE::Draw( EDA_DRAW_PANEL* panel, wxDC* DC, GR_DRAWMODE draw_mode,
EXCHG( StAngle, EndAngle );
}
if( typeaff == LINE )
{
GRArc( panel->GetClipBox(), DC, ux0, uy0, StAngle, EndAngle, radius, color );
}
else if( typeaff == FILLED )
if( filled )
{
GRArc( panel->GetClipBox(), DC, ux0, uy0, StAngle, EndAngle, radius, m_Width, color );
}
......
......@@ -89,7 +89,6 @@ void PCB_TARGET::Draw( EDA_DRAW_PANEL* panel, wxDC* DC, GR_DRAWMODE mode_color,
{
int radius, ox, oy, width;
int dx1, dx2, dy1, dy2;
int typeaff;
ox = m_Pos.x + offset.x;
oy = m_Pos.y + offset.y;
......@@ -103,29 +102,20 @@ void PCB_TARGET::Draw( EDA_DRAW_PANEL* panel, wxDC* DC, GR_DRAWMODE mode_color,
GRSetDrawMode( DC, mode_color );
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)panel->GetDisplayOptions();
typeaff = displ_opts ? displ_opts->m_DisplayDrawItems : FILLED;
bool filled = displ_opts ? displ_opts->m_DisplayDrawItemsFill : FILLED;
width = m_Width;
if( DC->LogicalToDeviceXRel( width ) <= MIN_DRAW_WIDTH )
typeaff = LINE;
radius = m_Size / 3;
if( GetShape() ) // shape X
radius = m_Size / 2;
switch( typeaff )
{
case LINE:
width = 0;
case FILLED:
if( filled )
GRCircle( panel->GetClipBox(), DC, ox, oy, radius, width, gcolor );
break;
case SKETCH:
else
{
GRCircle( panel->GetClipBox(), DC, ox, oy, radius + (width / 2), gcolor );
GRCircle( panel->GetClipBox(), DC, ox, oy, radius - (width / 2), gcolor );
break;
}
......@@ -142,18 +132,15 @@ void PCB_TARGET::Draw( EDA_DRAW_PANEL* panel, wxDC* DC, GR_DRAWMODE mode_color,
dy2 = -dy1;
}
switch( typeaff )
if( filled )
{
case LINE:
case FILLED:
GRLine( panel->GetClipBox(), DC, ox - dx1, oy - dy1, ox + dx1, oy + dy1, width, gcolor );
GRLine( panel->GetClipBox(), DC, ox - dx2, oy - dy2, ox + dx2, oy + dy2, width, gcolor );
break;
case SKETCH:
}
else
{
GRCSegm( panel->GetClipBox(), DC, ox - dx1, oy - dy1, ox + dx1, oy + dy1, width, gcolor );
GRCSegm( panel->GetClipBox(), DC, ox - dx2, oy - dy2, ox + dx2, oy + dy2, width, gcolor );
break;
}
}
......
......@@ -93,7 +93,7 @@ void TEXTE_PCB::Draw( EDA_DRAW_PANEL* panel, wxDC* DC,
EDA_DRAW_MODE_T fillmode = FILLED;
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)panel->GetDisplayOptions();
if( displ_opts && displ_opts->m_DisplayDrawItems == SKETCH )
if( displ_opts && displ_opts->m_DisplayDrawItemsFill == SKETCH )
fillmode = SKETCH;
EDA_COLOR_T anchor_color = UNSPECIFIED_COLOR;
......
......@@ -268,6 +268,7 @@ void TEXTE_MODULE::Draw( EDA_DRAW_PANEL* panel, wxDC* DC, GR_DRAWMODE draw_mode,
* hiding.
* If the whole module side is disabled this isn't even called */
LAYER_ID text_layer = GetLayer();
if( (IsFrontLayer( text_layer ) && !brd->IsElementVisible( MOD_TEXT_FR_VISIBLE )) ||
(IsBackLayer( text_layer ) && !brd->IsElementVisible( MOD_TEXT_BK_VISIBLE )) )
return;
......@@ -289,10 +290,8 @@ void TEXTE_MODULE::Draw( EDA_DRAW_PANEL* panel, wxDC* DC, GR_DRAWMODE draw_mode,
// Draw mode compensation for the width
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)panel->GetDisplayOptions();
int width = m_Thickness;
if( ( displ_opts && displ_opts->m_DisplayModText == LINE )
|| ( DC->LogicalToDeviceXRel( width ) <= MIN_DRAW_WIDTH ) )
width = 0;
else if( displ_opts && displ_opts->m_DisplayModText == SKETCH )
if( displ_opts && displ_opts->m_DisplayModTextFill == SKETCH )
width = -width;
GRSetDrawMode( DC, draw_mode );
......
......@@ -207,9 +207,9 @@ DISPLAY_OPTIONS::DISPLAY_OPTIONS()
m_DisplayPadNum = true;
m_DisplayPadIsol = true;
m_DisplayModEdge = true;
m_DisplayModText = true;
m_DisplayPcbTrackFill = true; // false = sketch , true = filled
m_DisplayModEdgeFill = FILLED;
m_DisplayModTextFill = FILLED;
m_DisplayPcbTrackFill = FILLED; // false = sketch , true = filled
m_ShowTrackClearanceMode = SHOW_CLEARANCE_NEW_TRACKS_AND_VIA_AREAS;
m_DisplayViaMode = VIA_HOLE_NOT_SHOW;
......@@ -222,7 +222,7 @@ DISPLAY_OPTIONS::DISPLAY_OPTIONS()
* 1 show netnames on pads
* 2 show netnames on tracks
* 3 show netnames on tracks and pads */
m_DisplayDrawItems = true;
m_DisplayDrawItemsFill = FILLED;
m_ContrastModeDisplay = false;
m_MaxLinksShowed = 3; // in track creation: number of hairwires shown
m_Show_Module_Ratsnest = true; // When moving a footprint: allows displaying a ratsnest
......
......@@ -5,8 +5,8 @@
/*
* This program source code file is part of KiCad, a free EDA CAD application.
*
* Copyright (C) 2014 Jean-Pierre Charras, jean-pierre.charras at wanadoo.fr
* Copyright (C) 1992-2014 KiCad Developers, see AUTHORS.txt for contributors.
* Copyright (C) 2015 Jean-Pierre Charras, jean-pierre.charras at wanadoo.fr
* Copyright (C) 1992-2015 KiCad Developers, see AUTHORS.txt for contributors.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
......@@ -61,7 +61,7 @@ DIALOG_DISPLAY_OPTIONS::DIALOG_DISPLAY_OPTIONS( PCB_EDIT_FRAME* parent ) :
init();
m_buttonOK->SetDefault();
m_sdbSizerOK->SetDefault();
GetSizer()->SetSizeHints( this );
}
......@@ -70,10 +70,7 @@ void DIALOG_DISPLAY_OPTIONS::init()
SetFocus();
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)m_Parent->GetDisplayOptions();
if ( displ_opts->m_DisplayPcbTrackFill )
m_OptDisplayTracks->SetSelection( 1 );
else
m_OptDisplayTracks->SetSelection( 0 );
m_OptDisplayTracks->SetValue( displ_opts->m_DisplayPcbTrackFill == SKETCH );
switch ( displ_opts->m_ShowTrackClearanceMode )
{
......@@ -99,25 +96,18 @@ void DIALOG_DISPLAY_OPTIONS::init()
break;
}
if ( displ_opts->m_DisplayPadFill )
m_OptDisplayPads->SetSelection( 1 );
else
m_OptDisplayPads->SetSelection( 0 );
m_OptDisplayPads->SetValue( displ_opts->m_DisplayPadFill == SKETCH );
m_OptDisplayVias->SetValue( displ_opts->m_DisplayViaFill == SKETCH );
if ( displ_opts->m_DisplayViaFill )
m_OptDisplayVias->SetSelection( 1 );
else
m_OptDisplayVias->SetSelection( 0 );
m_Show_Page_Limits->SetSelection( m_Parent->ShowPageLimits() ? 0 : 1 );
m_Show_Page_Limits->SetValue( m_Parent->ShowPageLimits() );
m_OptDisplayViaHole->SetSelection( displ_opts->m_DisplayViaMode );
m_OptDisplayModTexts->SetSelection( displ_opts->m_DisplayModText );
m_OptDisplayModEdges->SetSelection( displ_opts->m_DisplayModEdge );
m_OptDisplayModTexts->SetValue( displ_opts->m_DisplayModTextFill == SKETCH );
m_OptDisplayModOutlines->SetValue( displ_opts->m_DisplayModEdgeFill == SKETCH );
m_OptDisplayPadClearence->SetValue( displ_opts->m_DisplayPadIsol );
m_OptDisplayPadNumber->SetValue( displ_opts->m_DisplayPadNum );
m_OptDisplayPadNoConn->SetValue( m_Parent->IsElementVisible( PCB_VISIBLE( NO_CONNECTS_VISIBLE ) ) );
m_OptDisplayDrawings->SetSelection( displ_opts->m_DisplayDrawItems );
m_OptDisplayDrawings->SetValue( displ_opts->m_DisplayDrawItemsFill == SKETCH );
m_ShowNetNamesOption->SetSelection( displ_opts->m_DisplayNetNamesMode );
}
......@@ -134,12 +124,9 @@ void DIALOG_DISPLAY_OPTIONS::OnOkClick(wxCommandEvent& event)
{
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)m_Parent->GetDisplayOptions();
if ( m_Show_Page_Limits->GetSelection() == 0 )
m_Parent->SetShowPageLimits( true );
else
m_Parent->SetShowPageLimits( false );
m_Parent->SetShowPageLimits( m_Show_Page_Limits->GetValue() );
displ_opts->m_DisplayPcbTrackFill = m_OptDisplayTracks->GetSelection() == 1;
displ_opts->m_DisplayPcbTrackFill = not m_OptDisplayTracks->GetValue();
displ_opts->m_DisplayViaMode = (VIA_DISPLAY_MODE_T) m_OptDisplayViaHole->GetSelection();
......@@ -166,11 +153,11 @@ void DIALOG_DISPLAY_OPTIONS::OnOkClick(wxCommandEvent& event)
break;
}
displ_opts->m_DisplayModText = m_OptDisplayModTexts->GetSelection();
displ_opts->m_DisplayModEdge = m_OptDisplayModEdges->GetSelection();
displ_opts->m_DisplayModTextFill = not m_OptDisplayModTexts->GetValue();
displ_opts->m_DisplayModEdgeFill = not m_OptDisplayModOutlines->GetValue();
displ_opts->m_DisplayPadFill = m_OptDisplayPads->GetSelection() == 1;
displ_opts->m_DisplayViaFill = m_OptDisplayVias->GetSelection() == 1;
displ_opts->m_DisplayPadFill = not m_OptDisplayPads->GetValue();
displ_opts->m_DisplayViaFill = not m_OptDisplayVias->GetValue();
displ_opts->m_DisplayPadIsol = m_OptDisplayPadClearence->GetValue();
......@@ -179,7 +166,7 @@ void DIALOG_DISPLAY_OPTIONS::OnOkClick(wxCommandEvent& event)
m_Parent->SetElementVisibility( PCB_VISIBLE(NO_CONNECTS_VISIBLE),
m_OptDisplayPadNoConn->GetValue() );
displ_opts->m_DisplayDrawItems = m_OptDisplayDrawings->GetSelection();
displ_opts->m_DisplayDrawItemsFill = not m_OptDisplayDrawings->GetValue();
displ_opts->m_DisplayNetNamesMode = m_ShowNetNamesOption->GetSelection();
// Apply changes to the GAL
......
///////////////////////////////////////////////////////////////////////////
// C++ code generated with wxFormBuilder (version Jun 6 2014)
// C++ code generated with wxFormBuilder (version Jun 5 2014)
// http://www.wxformbuilder.org/
//
// PLEASE DO "NOT" EDIT THIS FILE!
......@@ -15,14 +15,15 @@ class DIALOG_SHIM;
#include "dialog_shim.h"
#include <wx/string.h>
#include <wx/radiobox.h>
#include <wx/checkbox.h>
#include <wx/gdicmn.h>
#include <wx/font.h>
#include <wx/colour.h>
#include <wx/settings.h>
#include <wx/radiobox.h>
#include <wx/sizer.h>
#include <wx/statbox.h>
#include <wx/checkbox.h>
#include <wx/statline.h>
#include <wx/button.h>
#include <wx/dialog.h>
......@@ -38,39 +39,37 @@ class DIALOG_DISPLAY_OPTIONS_BASE : public DIALOG_SHIM
protected:
enum
{
wxID_DISPLAY_TRACK = 1000,
ID_VIAS_SHAPES,
ID_VIAS_HOLES,
ID_SHOW_CLEARANCE,
ID_EDGES_MODULES,
ID_TEXT_MODULES,
ID_PADS_SHAPES
ID_VIAS_HOLES = 1000,
ID_SHOW_CLEARANCE
};
wxRadioBox* m_OptDisplayTracks;
wxRadioBox* m_OptDisplayVias;
wxCheckBox* m_OptDisplayTracks;
wxCheckBox* m_OptDisplayVias;
wxRadioBox* m_OptDisplayViaHole;
wxRadioBox* m_ShowNetNamesOption;
wxRadioBox* m_OptDisplayTracksClearance;
wxRadioBox* m_OptDisplayModEdges;
wxRadioBox* m_OptDisplayModTexts;
wxRadioBox* m_OptDisplayPads;
wxCheckBox* m_OptDisplayModOutlines;
wxCheckBox* m_OptDisplayModTexts
;
wxCheckBox* m_OptDisplayPads;
wxCheckBox* m_OptDisplayPadClearence;
wxCheckBox* m_OptDisplayPadNumber;
wxCheckBox* m_OptDisplayPadNoConn;
wxRadioBox* m_OptDisplayDrawings;
wxRadioBox* m_Show_Page_Limits;
wxButton* m_buttonOK;
wxButton* m_buttonCANCEL;
wxCheckBox* m_OptDisplayDrawings;
wxCheckBox* m_Show_Page_Limits;
wxStaticLine* m_staticline1;
wxStdDialogButtonSizer* m_sdbSizer;
wxButton* m_sdbSizerOK;
wxButton* m_sdbSizerCancel;
// Virtual event handlers, overide them in your derived class
virtual void OnOkClick( wxCommandEvent& event ) { event.Skip(); }
virtual void OnCancelClick( wxCommandEvent& event ) { event.Skip(); }
virtual void OnOkClick( wxCommandEvent& event ) { event.Skip(); }
public:
DIALOG_DISPLAY_OPTIONS_BASE( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("Display options"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxSize( 880,320 ), long style = wxDEFAULT_DIALOG_STYLE|wxRESIZE_BORDER );
DIALOG_DISPLAY_OPTIONS_BASE( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("Display options"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxSize( 562,361 ), long style = wxDEFAULT_DIALOG_STYLE|wxRESIZE_BORDER );
~DIALOG_DISPLAY_OPTIONS_BASE();
};
......
......@@ -5,7 +5,7 @@
/*
* This program source code file is part of KiCad, a free EDA CAD application.
*
* Copyright (C) 1992-2012 KiCad Developers, see AUTHORS.txt for contributors.
* Copyright (C) 1992-2015 KiCad Developers, see AUTHORS.txt for contributors.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
......@@ -193,7 +193,7 @@ void DIALOG_PLOT::Init_Dialog()
m_scaleOpt->SetSelection( m_plotOpts.GetScaleSelection() );
// Plot mode
m_plotModeOpt->SetSelection( m_plotOpts.GetMode() );
m_plotModeOpt->SetSelection( m_plotOpts.GetPlotMode() == SKETCH ? 1 : 0 );
// Plot mirror option
m_plotMirrorOpt->SetValue( m_plotOpts.GetMirror() );
......@@ -576,7 +576,7 @@ void DIALOG_PLOT::applyPlotSettings()
tempOptions.SetDrillMarksType( static_cast<PCB_PLOT_PARAMS::DrillMarksType>
( m_drillShapeOpt->GetSelection() ) );
tempOptions.SetMirror( m_plotMirrorOpt->GetValue() );
tempOptions.SetMode( static_cast<EDA_DRAW_MODE_T>( m_plotModeOpt->GetSelection() ) );
tempOptions.SetPlotMode( m_plotModeOpt->GetSelection() == 1 ? SKETCH : FILLED );
tempOptions.SetPlotViaOnMaskLayer( m_plotNoViaOnMaskOpt->GetValue() );
// Update settings from text fields. Rewrite values back to the fields,
......
///////////////////////////////////////////////////////////////////////////
// C++ code generated with wxFormBuilder (version Jun 6 2014)
// C++ code generated with wxFormBuilder (version Jun 5 2014)
// http://www.wxformbuilder.org/
//
// PLEASE DO "NOT" EDIT THIS FILE!
......@@ -159,7 +159,7 @@ DIALOG_PLOT_BASE::DIALOG_PLOT_BASE( wxWindow* parent, wxWindowID id, const wxStr
m_staticText13->Wrap( -1 );
bSizer14->Add( m_staticText13, 0, wxTOP|wxRIGHT|wxLEFT, 5 );
wxString m_plotModeOptChoices[] = { _("Line"), _("Filled"), _("Sketch") };
wxString m_plotModeOptChoices[] = { _("Filled"), _("Sketch") };
int m_plotModeOptNChoices = sizeof( m_plotModeOptChoices ) / sizeof( wxString );
m_plotModeOpt = new wxChoice( this, wxID_ANY, wxDefaultPosition, wxDefaultSize, m_plotModeOptNChoices, m_plotModeOptChoices, 0 );
m_plotModeOpt->SetSelection( 0 );
......
......@@ -26,7 +26,7 @@
<property name="ui_table">UI</property>
<property name="use_enum">1</property>
<property name="use_microsoft_bom">0</property>
<object class="Dialog" expanded="0">
<object class="Dialog" expanded="1">
<property name="aui_managed">0</property>
<property name="aui_manager_style">wxAUI_MGR_DEFAULT</property>
<property name="bg"></property>
......@@ -2064,7 +2064,7 @@
<property name="caption"></property>
<property name="caption_visible">1</property>
<property name="center_pane">0</property>
<property name="choices">&quot;Line&quot; &quot;Filled&quot; &quot;Sketch&quot;</property>
<property name="choices">&quot;Filled&quot; &quot;Sketch&quot;</property>
<property name="close_button">1</property>
<property name="context_help"></property>
<property name="context_menu">1</property>
......
///////////////////////////////////////////////////////////////////////////
// C++ code generated with wxFormBuilder (version Jun 6 2014)
// C++ code generated with wxFormBuilder (version Jun 5 2014)
// http://www.wxformbuilder.org/
//
// PLEASE DO "NOT" EDIT THIS FILE!
......
......@@ -114,7 +114,7 @@ void PCB_EDIT_FRAME::Delete_Segment_Edge( DRAWSEGMENT* Segment, wxDC* DC )
{
EDA_ITEM* PtStruct;
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
int tmp = displ_opts->m_DisplayDrawItems;
bool tmp = displ_opts->m_DisplayDrawItemsFill;
if( Segment == NULL )
return;
......@@ -122,7 +122,7 @@ void PCB_EDIT_FRAME::Delete_Segment_Edge( DRAWSEGMENT* Segment, wxDC* DC )
if( Segment->IsNew() ) // Trace in progress.
{
// Delete current segment.
displ_opts->m_DisplayDrawItems = SKETCH;
displ_opts->m_DisplayDrawItemsFill = SKETCH;
Segment->Draw( m_canvas, DC, GR_XOR );
PtStruct = Segment->Back();
Segment ->DeleteStructure();
......@@ -130,7 +130,7 @@ void PCB_EDIT_FRAME::Delete_Segment_Edge( DRAWSEGMENT* Segment, wxDC* DC )
if( PtStruct && (PtStruct->Type() == PCB_LINE_T ) )
Segment = (DRAWSEGMENT*) PtStruct;
displ_opts->m_DisplayDrawItems = tmp;
displ_opts->m_DisplayDrawItemsFill = tmp;
SetCurItem( NULL );
}
else if( Segment->GetFlags() == 0 )
......@@ -335,14 +335,15 @@ void PCB_EDIT_FRAME::End_Edge( DRAWSEGMENT* Segment, wxDC* DC )
*/
static void DrawSegment( EDA_DRAW_PANEL* aPanel, wxDC* aDC, const wxPoint& aPosition, bool aErase )
{
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)aPanel->GetDisplayOptions();
DRAWSEGMENT* Segment = (DRAWSEGMENT*) aPanel->GetScreen()->GetCurItem();
int tmp = displ_opts->m_DisplayDrawItems;
if( Segment == NULL )
return;
displ_opts->m_DisplayDrawItems = SKETCH;
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)aPanel->GetDisplayOptions();
bool tmp = displ_opts->m_DisplayDrawItemsFill;
displ_opts->m_DisplayDrawItemsFill = SKETCH;
if( aErase )
Segment->Draw( aPanel, aDC, GR_XOR );
......@@ -362,5 +363,5 @@ static void DrawSegment( EDA_DRAW_PANEL* aPanel, wxDC* aDC, const wxPoint& aPosi
}
Segment->Draw( aPanel, aDC, GR_XOR );
displ_opts->m_DisplayDrawItems = tmp;
displ_opts->m_DisplayDrawItemsFill = tmp;
}
......@@ -428,7 +428,7 @@ bool EXCELLON_WRITER::PlotDrillMarks( PLOTTER* aPlotter )
wxSize oblong_size;
oblong_size = m_holeListBuffer[ii].m_Hole_Size;
aPlotter->FlashPadOval( pos, oblong_size,
m_holeListBuffer[ii].m_Hole_Orient, LINE );
m_holeListBuffer[ii].m_Hole_Orient, SKETCH );
}
}
......
......@@ -60,12 +60,12 @@ void FOOTPRINT_EDIT_FRAME::OnSelectOptionToolbar( wxCommandEvent& event )
break;
case ID_TB_OPTIONS_SHOW_MODULE_TEXT_SKETCH:
displ_opts->m_DisplayModText = state ? SKETCH : FILLED;
displ_opts->m_DisplayModTextFill = state ? SKETCH : FILLED;
m_canvas->Refresh( );
break;
case ID_TB_OPTIONS_SHOW_MODULE_EDGE_SKETCH:
displ_opts->m_DisplayModEdge = state ? SKETCH : FILLED;
displ_opts->m_DisplayModEdgeFill = state ? SKETCH : FILLED;
m_canvas->Refresh( );
break;
......@@ -95,12 +95,12 @@ PARAM_CFG_ARRAY& FOOTPRINT_EDIT_FRAME::GetConfigurationSettings()
&displ_opts->m_DisplayPolarCood, false ) );
m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "FpEditorPadDisplayMode" ),
&displ_opts->m_DisplayPadFill, true ) );
m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "FpEditorGraphicLinesDisplayMode" ),
&displ_opts->m_DisplayModEdge, FILLED, 0, 2 ) );
m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "FpEditorTextsDisplayMode" ),
&displ_opts->m_DisplayModText, FILLED, 0, 2 ) );
m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "FpEditorTextsDisplayMode" ),
&displ_opts->m_DisplayModText, FILLED, 0, 2 ) );
m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "FpEditorGraphicLinesDisplayMode" ),
&displ_opts->m_DisplayModEdgeFill, FILLED ) );
m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "FpEditorTextsDisplayMode" ),
&displ_opts->m_DisplayModTextFill, FILLED ) );
m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "FpEditorTextsDisplayMode" ),
&displ_opts->m_DisplayModTextFill, FILLED ) );
m_configSettings.push_back( new PARAM_CFG_WXSTRING( true, wxT( "FpEditorTextsRefDefaultText" ),
&settings.m_RefDefaultText, wxT( "REF**" ) ) );
......
......@@ -578,11 +578,11 @@ void FOOTPRINT_EDIT_FRAME::OnUpdateOptionsToolbar( wxUpdateUIEvent& aEvent )
switch( id )
{
case ID_TB_OPTIONS_SHOW_MODULE_TEXT_SKETCH:
state = displ_opts->m_DisplayModText == SKETCH;
state = displ_opts->m_DisplayModTextFill == SKETCH;
break;
case ID_TB_OPTIONS_SHOW_MODULE_EDGE_SKETCH:
state = displ_opts->m_DisplayModEdge == SKETCH;
state = displ_opts->m_DisplayModEdgeFill == SKETCH;
break;
case ID_TB_OPTIONS_SHOW_HIGH_CONTRAST_MODE:
......
......@@ -2,7 +2,7 @@
/*
* This program source code file is part of KiCad, a free EDA CAD application.
*
* Copyright (C) 1992-2013 KiCad Developers, see change_log.txt for contributors.
* Copyright (C) 1992-2015 KiCad Developers, see change_log.txt for contributors.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
......@@ -89,7 +89,7 @@ PCB_PLOT_PARAMS::PCB_PLOT_PARAMS() :
m_lineWidth = g_DrawDefaultLineThickness;
m_plotFrameRef = false;
m_plotViaOnMaskLayer = false;
m_mode = FILLED;
m_plotMode = FILLED;
m_useAuxOrigin = false;
m_HPGLPenNum = 1;
m_HPGLPenSpeed = 20; // this param is always in cm/s
......@@ -167,7 +167,7 @@ void PCB_PLOT_PARAMS::Format( OUTPUTFORMATTER* aFormatter,
aFormatter->Print( aNestLevel+1, "(%s %s)\n", getTokenName( T_viasonmask ),
m_plotViaOnMaskLayer ? trueStr : falseStr );
aFormatter->Print( aNestLevel+1, "(%s %d)\n", getTokenName( T_mode ),
m_mode );
GetPlotMode() == SKETCH ? 2 : 1 ); // Value 0 (LINE mode) no more used
aFormatter->Print( aNestLevel+1, "(%s %s)\n", getTokenName( T_useauxorigin ),
m_useAuxOrigin ? trueStr : falseStr );
aFormatter->Print( aNestLevel+1, "(%s %d)\n", getTokenName( T_hpglpennumber ),
......@@ -237,7 +237,7 @@ bool PCB_PLOT_PARAMS::operator==( const PCB_PLOT_PARAMS &aPcbPlotParams ) const
return false;
if( m_plotViaOnMaskLayer != aPcbPlotParams.m_plotViaOnMaskLayer )
return false;
if( m_mode != aPcbPlotParams.m_mode )
if( m_plotMode != aPcbPlotParams.m_plotMode )
return false;
if( m_useAuxOrigin != aPcbPlotParams.m_useAuxOrigin )
return false;
......@@ -430,7 +430,7 @@ void PCB_PLOT_PARAMS_PARSER::Parse( PCB_PLOT_PARAMS* aPcbPlotParams )
break;
case T_mode:
aPcbPlotParams->m_mode = static_cast<EDA_DRAW_MODE_T>( parseInt( 0, 2 ) );
aPcbPlotParams->SetPlotMode( parseInt( 0, 2 ) > 1 ? SKETCH : FILLED );
break;
case T_useauxorigin:
......
......@@ -3,7 +3,7 @@
/*
* This program source code file is part of KiCad, a free EDA CAD application.
*
* Copyright (C) 1992-2011 KiCad Developers, see change_log.txt for contributors.
* Copyright (C) 1992-2015 KiCad Developers, see change_log.txt for contributors.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
......@@ -49,9 +49,10 @@ private:
// (mainly used to disable NPTH pads plotting on copper layers)
bool m_skipNPTH_Pads;
/** LINE, FILLED or SKETCH selects how to plot filled objects.
* FILLED is not available with all drivers */
EDA_DRAW_MODE_T m_mode;
/** FILLED or SKETCH selects how to plot filled objects.
* FILLED or SKETCH not available with all drivers: some have fixed mode
*/
EDA_DRAW_MODE_T m_plotMode;
/// Plot format type (chooses the driver to be used)
PlotFormat m_format;
......@@ -178,8 +179,8 @@ public:
void SetTextMode( PlotTextMode aVal ) { m_textMode = aVal; }
PlotTextMode GetTextMode() const { return m_textMode; }
void SetMode( EDA_DRAW_MODE_T aVal ) { m_mode = aVal; }
EDA_DRAW_MODE_T GetMode() const { return m_mode; }
void SetPlotMode( EDA_DRAW_MODE_T aPlotMode ) { m_plotMode = aPlotMode; }
EDA_DRAW_MODE_T GetPlotMode() const { return m_plotMode; }
void SetDrillMarksType( DrillMarksType aVal ) { m_drillMarks = aVal; }
DrillMarksType GetDrillMarksType() const { return m_drillMarks; }
......
......@@ -24,7 +24,6 @@
*/
#include <pcb_plot_params_lexer.h>
//#include <plot_common.h>
class PCB_PLOT_PARAMS;
class LINE_READER;
......
......@@ -354,12 +354,12 @@ PARAM_CFG_ARRAY& PCB_EDIT_FRAME::GetConfigurationSettings()
&displ_opts->m_DisplayPadIsol, true ) );
m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "PadSNum" ),
&displ_opts->m_DisplayPadNum, true ) );
m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "ModAffC" ),
&displ_opts->m_DisplayModEdge, FILLED, 0, 2 ) );
m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "ModAffT" ),
&displ_opts->m_DisplayModText, FILLED, 0, 2 ) );
m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "PcbAffT" ),
&displ_opts->m_DisplayDrawItems, FILLED, 0, 2 ) );
m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "ModAffC" ),
&displ_opts->m_DisplayModEdgeFill, FILLED ) );
m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "ModAffT" ),
&displ_opts->m_DisplayModTextFill, FILLED ) );
m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "PcbAffT" ),
&displ_opts->m_DisplayDrawItemsFill, FILLED ) );
m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "PcbShowZonesMode" ),
&displ_opts->m_DisplayZonesMode, 0, 0, 2 ) );
......
......@@ -103,7 +103,7 @@ void PlotSilkScreen( BOARD *aBoard, PLOTTER* aPlotter, LSET aLayerMask,
if( layersmask_plotpads[F_SilkS] )
color = ColorFromInt( color | aBoard->GetLayerColor( F_SilkS ) );
itemplotter.PlotPad( pad, color, LINE );
itemplotter.PlotPad( pad, color, SKETCH );
}
}
}
......@@ -137,7 +137,7 @@ void PlotSilkScreen( BOARD *aBoard, PLOTTER* aPlotter, LSET aLayerMask,
continue;
aPlotter->ThickSegment( seg->GetStart(), seg->GetEnd(), seg->GetWidth(),
itemplotter.GetMode() );
itemplotter.GetPlotMode() );
}
}
......@@ -285,7 +285,7 @@ void PlotStandardLayer( BOARD *aBoard, PLOTTER* aPlotter,
itemplotter.SetLayerSet( aLayerMask );
EDA_DRAW_MODE_T plotMode = aPlotOpt.GetMode();
EDA_DRAW_MODE_T plotMode = aPlotOpt.GetPlotMode();
// Plot edge layer and graphic items
itemplotter.PlotBoardGraphicItems();
......
......@@ -222,9 +222,6 @@ void BRDITEMS_PLOTTER::PlotTextModule( TEXTE_MODULE* pt_texte, EDA_COLOR_T aColo
thickness = pt_texte->GetThickness();
if( GetMode() == LINE )
thickness = -1;
if( pt_texte->IsMirrored() )
NEGATE( size.x ); // Text is mirrored
......@@ -249,7 +246,7 @@ void BRDITEMS_PLOTTER::PlotDimension( DIMENSION* aDim )
DRAWSEGMENT draw;
draw.SetWidth( (GetMode() == LINE) ? -1 : aDim->GetWidth() );
draw.SetWidth( aDim->GetWidth() );
draw.SetLayer( aDim->GetLayer() );
EDA_COLOR_T color = aDim->GetBoard()->GetLayerColor( aDim->GetLayer() );
......@@ -302,7 +299,7 @@ void BRDITEMS_PLOTTER::PlotPcbTarget( PCB_TARGET* aMire )
DRAWSEGMENT draw;
draw.SetShape( S_CIRCLE );
draw.SetWidth( ( GetMode() == LINE ) ? -1 : aMire->GetWidth() );
draw.SetWidth( aMire->GetWidth() );
draw.SetLayer( aMire->GetLayer() );
draw.SetStart( aMire->GetPosition() );
radius = aMire->GetSize() / 3;
......@@ -382,12 +379,12 @@ void BRDITEMS_PLOTTER::Plot_1_EdgeModule( EDGE_MODULE* aEdge )
switch( type_trace )
{
case S_SEGMENT:
m_plotter->ThickSegment( pos, end, thickness, GetMode() );
m_plotter->ThickSegment( pos, end, thickness, GetPlotMode() );
break;
case S_CIRCLE:
radius = KiROUND( GetLineLength( end, pos ) );
m_plotter->ThickCircle( pos, radius * 2, thickness, GetMode() );
m_plotter->ThickCircle( pos, radius * 2, thickness, GetPlotMode() );
break;
case S_ARC:
......@@ -396,7 +393,7 @@ void BRDITEMS_PLOTTER::Plot_1_EdgeModule( EDGE_MODULE* aEdge )
double startAngle = ArcTangente( end.y - pos.y, end.x - pos.x );
double endAngle = startAngle + aEdge->GetAngle();
m_plotter->ThickArc( pos, -endAngle, -startAngle, radius, thickness, GetMode() );
m_plotter->ThickArc( pos, -endAngle, -startAngle, radius, thickness, GetPlotMode() );
}
break;
......@@ -455,7 +452,7 @@ void BRDITEMS_PLOTTER::PlotTextePcb( TEXTE_PCB* pt_texte )
size = pt_texte->GetSize();
pos = pt_texte->GetTextPosition();
orient = pt_texte->GetOrientation();
thickness = ( GetMode() == LINE ) ? -1 : pt_texte->GetThickness();
thickness = pt_texte->GetThickness();
if( pt_texte->IsMirrored() )
size.x = -size.x;
......@@ -528,7 +525,7 @@ void BRDITEMS_PLOTTER::PlotFilledAreas( ZONE_CONTAINER* aZone )
}
// Plot the current filled area and its outline
if( GetMode() == FILLED )
if( GetPlotMode() == FILLED )
{
// Plot the filled area polygon.
// The area can be filled by segments or uses solid polygons
......@@ -544,7 +541,7 @@ void BRDITEMS_PLOTTER::PlotFilledAreas( ZONE_CONTAINER* aZone )
wxPoint end = aZone->FillSegments()[iseg].m_End;
m_plotter->ThickSegment( start, end,
aZone->GetMinThickness(),
GetMode() );
GetPlotMode() );
}
// Plot the area outline only
......@@ -558,9 +555,8 @@ void BRDITEMS_PLOTTER::PlotFilledAreas( ZONE_CONTAINER* aZone )
{
for( unsigned jj = 1; jj<cornerList.size(); jj++ )
m_plotter->ThickSegment( cornerList[jj -1], cornerList[jj],
( GetMode() == LINE ) ? -1 :
aZone->GetMinThickness(),
GetMode() );
GetPlotMode() );
}
m_plotter->SetCurrentLineWidth( -1 );
......@@ -576,17 +572,12 @@ void BRDITEMS_PLOTTER::PlotFilledAreas( ZONE_CONTAINER* aZone )
*/
void BRDITEMS_PLOTTER::PlotDrawSegment( DRAWSEGMENT* aSeg )
{
int thickness;
int radius = 0;
double StAngle = 0, EndAngle = 0;
if( !m_layerMask[aSeg->GetLayer()] )
return;
if( GetMode() == LINE )
thickness = GetLineWidth();
else
thickness = aSeg->GetWidth();
int radius = 0;
double StAngle = 0, EndAngle = 0;
int thickness = aSeg->GetWidth();
m_plotter->SetColor( getColor( aSeg->GetLayer() ) );
......@@ -599,14 +590,14 @@ void BRDITEMS_PLOTTER::PlotDrawSegment( DRAWSEGMENT* aSeg )
{
case S_CIRCLE:
radius = KiROUND( GetLineLength( end, start ) );
m_plotter->ThickCircle( start, radius * 2, thickness, GetMode() );
m_plotter->ThickCircle( start, radius * 2, thickness, GetPlotMode() );
break;
case S_ARC:
radius = KiROUND( GetLineLength( end, start ) );
StAngle = ArcTangente( end.y - start.y, end.x - start.x );
EndAngle = StAngle + aSeg->GetAngle();
m_plotter->ThickArc( start, -EndAngle, -StAngle, radius, thickness, GetMode() );
m_plotter->ThickArc( start, -EndAngle, -StAngle, radius, thickness, GetPlotMode() );
break;
case S_CURVE:
......@@ -616,12 +607,12 @@ void BRDITEMS_PLOTTER::PlotDrawSegment( DRAWSEGMENT* aSeg )
for( unsigned i = 1; i < bezierPoints.size(); i++ )
m_plotter->ThickSegment( bezierPoints[i - 1],
bezierPoints[i],
thickness, GetMode() );
thickness, GetPlotMode() );
}
break;
default:
m_plotter->ThickSegment( start, end, thickness, GetMode() );
m_plotter->ThickSegment( start, end, thickness, GetPlotMode() );
}
}
......@@ -646,10 +637,10 @@ void BRDITEMS_PLOTTER::plotOneDrillMark( PAD_DRILL_SHAPE_T aDrillShape,
{
aDrillSize.y -= getFineWidthAdj();
aDrillSize.y = Clamp( 1, aDrillSize.y, aPadSize.y - 1 );
m_plotter->FlashPadOval( aDrillPos, aDrillSize, aOrientation, GetMode() );
m_plotter->FlashPadOval( aDrillPos, aDrillSize, aOrientation, GetPlotMode() );
}
else
m_plotter->FlashPadCircle( aDrillPos, aDrillSize.x, GetMode() );
m_plotter->FlashPadCircle( aDrillPos, aDrillSize.x, GetPlotMode() );
}
......@@ -671,7 +662,7 @@ void BRDITEMS_PLOTTER::PlotDrillMarks()
you could start a layer with negative polarity to scrape the film.
- In DXF they go into the 'WHITE' layer. This could be useful.
*/
if( GetMode() == FILLED )
if( GetPlotMode() == FILLED )
m_plotter->SetColor( WHITE );
for( TRACK *pts = m_board->m_Track; pts != NULL; pts = pts->Next() )
......@@ -698,6 +689,6 @@ void BRDITEMS_PLOTTER::PlotDrillMarks()
}
}
if( GetMode() == FILLED )
if( GetPlotMode() == FILLED )
m_plotter->SetColor( GetColor() );
}
......@@ -71,11 +71,11 @@ void FOOTPRINT_EDIT_FRAME::PrintPage( wxDC* aDC,
bool nctmp = GetBoard()->IsElementVisible(NO_CONNECTS_VISIBLE);
GetBoard()->SetElementVisibility(NO_CONNECTS_VISIBLE, false);
displ_opts->m_DisplayPadIsol = false;
displ_opts->m_DisplayModEdge = FILLED;
displ_opts->m_DisplayModText = FILLED;
displ_opts->m_DisplayModEdgeFill = FILLED;
displ_opts->m_DisplayModTextFill = FILLED;
displ_opts->m_DisplayPcbTrackFill = true;
displ_opts->m_ShowTrackClearanceMode = DO_NOT_SHOW_CLEARANCE;
displ_opts->m_DisplayDrawItems = FILLED;
displ_opts->m_DisplayDrawItemsFill = FILLED;
displ_opts->m_DisplayZonesMode = 0;
displ_opts->m_DisplayNetNamesMode = 0;
......@@ -191,11 +191,11 @@ void PCB_EDIT_FRAME::PrintPage( wxDC* aDC,
GetBoard()->SetElementVisibility( ANCHOR_VISIBLE, false );
displ_opts->m_DisplayPadIsol = false;
displ_opts->m_DisplayModEdge = FILLED;
displ_opts->m_DisplayModText = FILLED;
displ_opts->m_DisplayModEdgeFill = FILLED;
displ_opts->m_DisplayModTextFill = FILLED;
displ_opts->m_DisplayPcbTrackFill = true;
displ_opts->m_ShowTrackClearanceMode = DO_NOT_SHOW_CLEARANCE;
displ_opts->m_DisplayDrawItems = FILLED;
displ_opts->m_DisplayDrawItemsFill = FILLED;
displ_opts->m_DisplayZonesMode = 0;
displ_opts->m_DisplayNetNamesMode = 0;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment