Commit af445e70 authored by CHARRAS's avatar CHARRAS

remove the old EDGEZONE class. Cleaning code in polyline.x

parent b62a69fc
......@@ -5,6 +5,13 @@ Started 2007-June-11
Please add newer entries at the top, list the date and your name with
email address.
2008-Jan-31 UPDATE Jean-Pierre Charras <jean-pierre.charras@inpg.fr>
================================================================================
+pcbnew:
remove the old EDGEZONE class.
A ZONE_CONTAINER class is used instead to handle the creation of a new zone outline
2008-Jan-29 UPDATE Dick Hollenbeck <dick@softplc.com>
================================================================================
+pcbnew:
......
......@@ -40,7 +40,7 @@ enum KICAD_T {
TYPEMIRE,
TYPESCREEN,
TYPEBLOCK,
TYPEEDGEZONE,
TYPEZONE_UNUSED,
TYPEZONE_EDGE_CORNER,
TYPEZONE_CONTAINER,
......
......@@ -109,6 +109,9 @@
#define ECO2_LAYER (1 << ECO2_N)
#define EDGE_LAYER (1 << EDGE_N)
#define FIRST_NON_COPPER_LAYER ADHESIVE_N_CU
#define LAST_NON_COPPER_LAYER EDGE_N
// extra bits 0xE0000000
/* masques generaux : */
#define ALL_LAYERS 0x1FFFFFFF
......
......@@ -35,7 +35,6 @@ class MODULE;
class TRACK;
class SEGZONE;
class SEGVIA;
class EDGE_ZONE;
class D_PAD;
class TEXTE_MODULE;
class MIREPCB;
......@@ -268,13 +267,6 @@ public:
void Block_Duplicate( wxDC* DC );
/**
* Function DelLimitesZone
* deletes the limits of a zone.
* @param DC A wxDC to draw onto.
* @param Redraw If true, means redraw the pcb without the zone limits
*/
void DelLimitesZone( wxDC* DC, bool Redraw );
// layerhandling:
// (See pcbnew/sel_layer.cpp for description of why null_layer parameter is provided)
......@@ -487,14 +479,21 @@ public:
*/
void Delete_Zone_Fill( wxDC* DC, SEGZONE* Track, long aTimestamp = 0 );
EDGE_ZONE* Del_LastSegmEdgeZone( wxDC* DC );
/** Function Delete_LastCreatedCorner
* Used only while creating a new zone outline
* Remove and delete the current outline segment in progress
* @return 0 if no corner in list, or corner number
*/
int Delete_LastCreatedCorner( wxDC* DC);
/**
* Function Begin_Zone
* initiates a zone edge creation process,
* or terminates the current zone edge and creates a new zone edge stub
*/
EDGE_ZONE* Begin_Zone( wxDC* DC );
int Begin_Zone( wxDC* DC );
/**
* Function End_Zone
......
......@@ -36,7 +36,7 @@ BOARD::BOARD( EDA_BaseStruct* parent, WinEDA_BasePcbFrame* frame ) :
m_Pads = NULL; // pointeur liste d'acces aux pads
m_Ratsnest = NULL; // pointeur liste rats
m_LocalRatsnest = NULL; // pointeur liste rats local
m_CurrentLimitZone = NULL; // pointeur liste des EDEGE_ZONES
m_CurrentZoneContour = NULL; // This ZONE_CONTAINER handle the zone contour cuurently in progress
// de determination des contours de zone
}
......@@ -61,9 +61,6 @@ BOARD::~BOARD()
m_Zone->DeleteStructList();
m_Zone = 0;
m_CurrentLimitZone->DeleteStructList();
m_CurrentLimitZone = 0;
MyFree( m_Pads );
m_Pads = 0;
......@@ -75,6 +72,9 @@ BOARD::~BOARD()
DeleteMARKERs();
DeleteZONEOutlines();
delete m_CurrentZoneContour;
m_CurrentZoneContour = NULL;
}
......@@ -588,9 +588,7 @@ SEARCH_RESULT BOARD::Visit( INSPECTOR* inspector, const void* testData,
++p;
break;
case TYPEEDGEZONE:
result = IterateForward( m_CurrentLimitZone, inspector, testData, p );
++p;
case TYPEZONE_UNUSED: // Unused type
break;
default: // catch EOT or ANY OTHER type here and return.
......
......@@ -45,7 +45,7 @@ public:
CHEVELU* m_Ratsnest; // Rastnest list
CHEVELU* m_LocalRatsnest; // Rastnest list used while moving a footprint
EDGE_ZONE* m_CurrentLimitZone; /* zone contour currently in progress */
ZONE_CONTAINER* m_CurrentZoneContour; // zone contour currently in progress
BOARD( EDA_BaseStruct* StructFather, WinEDA_BasePcbFrame* frame );
~BOARD();
......
......@@ -89,8 +89,9 @@ wxString BOARD_ITEM::MenuText( const BOARD* aPcb ) const
break;
case TYPEEDGEMODULE:
{
text << _( "Graphic" ) << wxT( " " );
const wxChar* cp;
wxString cp;
switch( ( (EDGE_MODULE*) item )->m_Shape )
{
......@@ -126,10 +127,12 @@ wxString BOARD_ITEM::MenuText( const BOARD* aPcb ) const
cp = wxT( "??EDGE??" ); break;
}
text << *cp << _( " of " )
text << cp;
text << wxT( " (" ) << ReturnPcbLayerName( ((EDGE_MODULE*) item )->m_Layer ).Trim() << wxT( ")" );
text << _( " of " )
<< ( (MODULE*) GetParent() )->GetReference();
break;
}
case TYPETRACK:
// deleting tracks requires all the information we can get to
// disambiguate all the crap under the cursor!
......@@ -239,8 +242,8 @@ wxString BOARD_ITEM::MenuText( const BOARD* aPcb ) const
;
break;
case TYPEEDGEZONE:
text << _( "Edge Zone" ) << _( " on " ) << ReturnPcbLayerName( item->GetLayer() ).Trim(); // @todo: extend text
case TYPEZONE_UNUSED:
text << wxT( "Unused" );
break;
default:
......@@ -318,8 +321,8 @@ const char** BOARD_ITEM::MenuIcon() const
xpm = add_mires_xpm;
break;
case TYPEEDGEZONE:
xpm = show_mod_edge_xpm; // @todo: pcb edge xpm
case TYPEZONE_UNUSED:
xpm = 0; // unused
break;
default:
......
......@@ -298,70 +298,9 @@ void EDGE_MODULE::Display_Infos( WinEDA_DrawFrame* frame )
}
#if 0 // replaced by Save()
/*****************************************/
int EDGE_MODULE::WriteDescr( FILE* File )
/*****************************************/
/* Write one EDGE_MODULE description
* File must be opened.
*/
{
int NbLigne = 0, ii, * ptr;
switch( m_Shape )
{
case S_SEGMENT:
fprintf( File, "DS %d %d %d %d %d %d\n",
m_Start0.x, m_Start0.y,
m_End0.x, m_End0.y,
m_Width, m_Layer );
NbLigne++;
break;
case S_CIRCLE:
fprintf( File, "DC %d %d %d %d %d %d\n",
m_Start0.x, m_Start0.y,
m_End0.x, m_End0.y,
m_Width, m_Layer );
NbLigne++;
break;
case S_ARC:
fprintf( File, "DA %d %d %d %d %d %d %d\n",
m_Start0.x, m_Start0.y,
m_End0.x, m_End0.y,
m_Angle,
m_Width, m_Layer );
NbLigne++;
break;
case S_POLYGON:
fprintf( File, "DP %d %d %d %d %d %d %d\n",
m_Start0.x, m_Start0.y,
m_End0.x, m_End0.y,
m_PolyCount,
m_Width, m_Layer );
NbLigne++;
for( ii = 0, ptr = m_PolyList; ii < m_PolyCount; ii++ )
{
fprintf( File, "Dl %d %d\n",
*ptr, *(ptr + 1) );
NbLigne++; ptr += 2;
}
break;
default:
DisplayError( NULL, wxT( "Type Edge Module inconnu" ) );
break;
}
return NbLigne;
}
#endif
/*******************************************/
bool EDGE_MODULE::Save( FILE* aFile ) const
/*******************************************/
{
int ret = -1;
......@@ -514,12 +453,15 @@ int EDGE_MODULE::ReadDescr( char* Line, FILE* File,
break;
}
// Controle d'epaisseur raisonnable:
// Check for a reasonnable width:
if( m_Width <= 1 )
m_Width = 1;
if( m_Width > MAX_WIDTH )
m_Width = MAX_WIDTH;
// Check for a reasonnable layer:
if ( (m_Layer < FIRST_NON_COPPER_LAYER) || (m_Layer > LAST_NON_COPPER_LAYER) )
m_Layer = SILKSCREEN_N_CMP;
return error;
}
......
This diff is collapsed.
......@@ -73,6 +73,19 @@ public:
void Draw( WinEDA_DrawPanel* panel, wxDC* DC,
const wxPoint& offset, int draw_mode );
/**
* Function DrawWhileCreateOutline
* Draws the zone outline when ir is created.
* The moving edges are in XOR graphic mode, old segment in draw_mode graphic mode (usually GR_OR)
* The closing edge has its owm shape
* @param panel = current Draw Panel
* @param DC = current Device Context
* @param draw_mode = draw mode: OR, XOR ..
*/
void DrawWhileCreateOutline( WinEDA_DrawPanel* panel, wxDC* DC, int draw_mode = GR_OR );
int GetNet( void ) const
{
return m_NetCode;
......@@ -158,73 +171,36 @@ public:
{
return wxT( "ZONE_CONTAINER" );
}
};
/*******************/
/* class EDGE_ZONE */
/*******************/
/* Classe used temporary to create a zone outline.
*
* TODO: remove this class and use only the ZONE_CONTAINER::m_Poly
* to create outlines
/** Acces to m_Poly parameters
*/
class EDGE_ZONE : public DRAWSEGMENT
{
private:
int m_NetCode;
public:
EDGE_ZONE( BOARD * StructFather );
~EDGE_ZONE();
EDGE_ZONE* Next()
int GetNumCorners(void)
{
return (EDGE_ZONE*) Pnext;
return m_Poly->GetNumCorners();
}
EDGE_ZONE* Back()
void RemoveAllContours(void)
{
return (EDGE_ZONE*) Pback;
m_Poly->RemoveAllContours();
}
int GetNet( void ) const
wxPoint GetCornerPosition(int aCornerIndex)
{
return m_NetCode;
return wxPoint(m_Poly->GetX(aCornerIndex), m_Poly->GetY(aCornerIndex));
}
void SetNet( int anet_code )
void SetCornerPosition(int aCornerIndex, wxPoint new_pos)
{
m_NetCode = anet_code;
m_Poly->SetX(aCornerIndex, new_pos.x);
m_Poly->SetY(aCornerIndex, new_pos.y);
}
/**
* Function Display_Infos
* has knowledge about the frame and how and where to put status information
* about this object into the frame's message panel.
* Is virtual from EDA_BaseStruct.
* @param frame A WinEDA_BasePcbFrame in which to print status information.
*/
void Display_Infos( WinEDA_DrawFrame* frame );
/**
* Function Save
* writes the data structures for this object out to a FILE in "*.brd" format.
* @param aFile The FILE to write to.
* @return bool - true if success writing else false.
*/
bool Save( FILE* aFile ) const;
/**
* Function GetClass
* returns the class name.
* @return wxString
*/
wxString GetClass() const
void AppendCorner( wxPoint position )
{
return wxT( "EDGE_ZONE" );
m_Poly->AppendCorner( position.x, position.y );
}
};
#endif // #ifndef CLASS_ZONE_H
......@@ -157,22 +157,23 @@ int DRC::Drc( TRACK* aRefSegm, TRACK* aList )
}
/*********************************************/
int DRC::Drc( const EDGE_ZONE* aEdge )
/*********************************************/
/**************************************************************/
int DRC::Drc( ZONE_CONTAINER * aArea, int CornerIndex )
/*************************************************************/
/**
* Function Drc
* tests the current EDGE_ZONE segment and returns the result and displays the error
* tests the outline segment starting at CornerIndex and returns the result and displays the error
* in the status panel only if one exists.
* Test Edge inside other areas
* Test Edge too close other areas
* @param aEdge The current segment to test.
* @param aEdge The areaparent which contains the corner.
* @param CornerIndex The starting point of the segment to test.
* @return int - BAD_DRC (1) if DRC error or OK_DRC (0) if OK
*/
{
updatePointers();
if( ! doEdgeZoneDrc( aEdge ) )
if( ! doEdgeZoneDrc( aArea, CornerIndex ) )
{
wxASSERT( m_currentMarker );
m_currentMarker->Display_Infos( m_mainWindow );
......@@ -461,9 +462,10 @@ MARKER* DRC::fillMarker( ZONE_CONTAINER * aArea, int aErrorCode, MARKER* fillMe
return fillMe;
}
MARKER* DRC::fillMarker( const EDGE_ZONE * aEdge, const wxPoint & aPos, int aErrorCode, MARKER* fillMe )
MARKER* DRC::fillMarker( const ZONE_CONTAINER * aArea, const wxPoint & aPos, int aErrorCode, MARKER* fillMe )
{
wxString textA = aEdge->MenuText( m_pcb );
wxString textA = aArea->MenuText( m_pcb );
wxPoint posA = aPos;
......
......@@ -373,7 +373,7 @@ private:
* @param fillMe A MARKER* which is to be filled in, or NULL if one is to
* first be allocated, then filled.
*/
MARKER* fillMarker( const EDGE_ZONE * aEdge, const wxPoint & aPos, int aErrorCode, MARKER* fillMe );
MARKER* fillMarker( const ZONE_CONTAINER * aArea, const wxPoint & aPos, int aErrorCode, MARKER* fillMe );
//-----<categorical group tests>-----------------------------------------
......@@ -413,14 +413,15 @@ private:
/**
* Function doEdgeZoneDrc
* tests the current EDGE_ZONE segment:
* tests a segment in ZONE_CONTAINER * aArea:
* Test Edge inside other areas
* Test Edge too close other areas
* @param aEdge The current segment to test.
* @param aArea The current area.
* @param aCornerIndex The first corner of the segment to test.
* @return bool - false if DRC error or true if OK
*/
bool doEdgeZoneDrc( const EDGE_ZONE* aEdge );
bool doEdgeZoneDrc( ZONE_CONTAINER * aArea, int aCornerIndex );
//-----<single tests>----------------------------------------------
......@@ -496,14 +497,15 @@ public:
/**
* Function Drc
* tests the current EDGE_ZONE segment and returns the result and displays the error
* tests the outline segment starting at CornerIndex and returns the result and displays the error
* in the status panel only if one exists.
* Test Edge inside other areas
* Test Edge too close other areas
* @param aEdge The current segment to test.
* @param aEdge The areaparent which contains the corner.
* @param CornerIndex The starting point of the segment to test.
* @return int - BAD_DRC (1) if DRC error or OK_DRC (0) if OK
*/
int Drc( const EDGE_ZONE* aEdge );
int Drc( ZONE_CONTAINER * aArea, int CornerIndex );
/**
* Function DrcBlind
......
......@@ -267,7 +267,6 @@ void WinEDA_PcbFrame::Process_Special_Functions( wxCommandEvent& event )
SetToolID( id, wxCURSOR_PENCIL, _( "Add Zones" ) );
if( !DisplayOpt.DisplayZones )
DisplayInfo( this, _( "Warning: Display Zone is OFF!!!" ) );
DelLimitesZone( &dc, TRUE );
if( !g_HightLigt_Status && (g_HightLigth_NetCode > 0 ) )
Hight_Light( &dc );
break;
......@@ -821,7 +820,8 @@ void WinEDA_PcbFrame::Process_Special_Functions( wxCommandEvent& event )
DrawPanel->MouseToCursorSchema();
if( GetCurItem() && (GetCurItem()->m_Flags & IS_NEW) )
{
SetCurItem( Del_LastSegmEdgeZone( &dc ) );
if ( Delete_LastCreatedCorner( &dc ) == 0) // No more segment in outline,
SetCurItem(NULL);
}
break;
......
......@@ -145,8 +145,6 @@ bool WinEDA_BasePcbFrame::Clear_Pcb( bool query )
m_Pcb->m_Zone = NULL;
m_Pcb->m_NbSegmZone = 0;
DelLimitesZone( NULL, FALSE );
m_Pcb->DeleteMARKERs();
m_Pcb->DeleteZONEOutlines();
......@@ -222,7 +220,6 @@ void WinEDA_PcbFrame::Erase_Zones( bool query )
m_Pcb->m_NbSegmZone = 0;
}
DelLimitesZone( NULL, FALSE );
m_Pcb->DeleteZONEOutlines();
GetScreen()->SetModify();
......
......@@ -39,6 +39,9 @@ void WinEDA_PcbFrame::OnLeftClick( wxDC* DC, const wxPoint& MousePos )
switch( DrawStruct->Type() )
{
case TYPEZONE_CONTAINER:
if ( (DrawStruct->m_Flags & IS_NEW) )
Begin_Zone( DC );
else
End_Move_Zone_Corner_Or_Outlines( DC, (ZONE_CONTAINER *) DrawStruct );
exit = true;
break;
......@@ -220,13 +223,19 @@ void WinEDA_PcbFrame::OnLeftClick( wxDC* DC, const wxPoint& MousePos )
case ID_PCB_ZONES_BUTT:
if( (DrawStruct == NULL) || (DrawStruct->m_Flags == 0) )
{
GetScreen()->SetCurItem( DrawStruct = Begin_Zone( DC ) );
if ( Begin_Zone( DC ) )
{
DrawStruct = m_Pcb->m_CurrentZoneContour;
GetScreen()->SetCurItem( DrawStruct );
}
}
else if( DrawStruct
&& (DrawStruct->Type() == TYPEEDGEZONE)
&& (DrawStruct->Type() == TYPEZONE_CONTAINER)
&& (DrawStruct->m_Flags & IS_NEW) )
{
GetScreen()->SetCurItem( DrawStruct = Begin_Zone( DC ) );
Begin_Zone( DC );
DrawStruct = m_Pcb->m_CurrentZoneContour;
GetScreen()->SetCurItem( DrawStruct );
}
else
DisplayError( this, wxT( "Edit: zone internal error" ) );
......
......@@ -277,20 +277,18 @@ bool WinEDA_PcbFrame::OnRightClick( const wxPoint& aMousePos, wxMenu* aPopMenu )
case TYPEZONE: // Item used to fill a zone
ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_DELETE_ZONE,
_( "Delete Zone" ), delete_xpm );
_( "Delete Zone Filling" ), delete_xpm );
break;
case TYPEEDGEZONE: // Graphic Item used to create a new zone outline
case TYPEZONE_CONTAINER: // Item used to handle a zone area (outlines, holes ...)
if( flags & IS_NEW )
{
ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_STOP_CURRENT_EDGE_ZONE,
_( "End edge zone" ), apply_xpm );
}
_( "Close Zone Outline" ), apply_xpm );
ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_DELETE_ZONE_LAST_CREATED_CORNER,
_( "Delete Current Edge" ), delete_xpm );
break;
case TYPEZONE_CONTAINER: // Item used to handle a zone area (outlines, holes ...)
_( "Delete Last Corner" ), delete_xpm );
}
else
createPopUpMenuForZones( (ZONE_CONTAINER*) item, aPopMenu );
break;
......
......@@ -176,18 +176,10 @@ void WinEDA_PcbFrame::Trace_Pcb( wxDC* DC, int mode )
if( g_HightLigt_Status )
DrawHightLight( DC, g_HightLigth_NetCode );
EDGE_ZONE* segment;
for( segment = m_Pcb->m_CurrentLimitZone; segment; segment = segment->Next() )
{
if( segment->m_Flags & IS_MOVED )
continue;
Trace_DrawSegmentPcb( DrawPanel, DC, segment, mode );
}
for( unsigned ii = 0; ii < m_Pcb->m_ZoneDescriptorList.size(); ii++ )
for( unsigned ii = 0; ii < m_Pcb->GetAreaCount(); ii++ )
{
ZONE_CONTAINER* edge_zone = m_Pcb->m_ZoneDescriptorList[ii];
ZONE_CONTAINER* edge_zone = m_Pcb->GetArea(ii);
edge_zone->Draw( DrawPanel, DC, wxPoint(0,0), mode);
}
......
......@@ -196,7 +196,12 @@ int ZONE_CONTAINER::Fill_Zone( WinEDA_PcbFrame* frame, wxDC* DC, bool verbose )
if( cells_count == 0 )
{
if( verbose )
DisplayError( frame, _( "No pads or starting point found to fill this zone outline" ) );
{
msg = _( "No pads or starting point found to fill this zone outline" );
msg << wxT("\n");
msg << MenuText( frame->m_Pcb );
DisplayError( frame, msg );
}
error_level = 2;
goto end_of_zone_fill;
}
......
This diff is collapsed.
......@@ -65,8 +65,7 @@ ZONE_CONTAINER* BOARD::InsertArea( int netcode, int iarea, int layer, int x, int
else
m_ZoneDescriptorList.push_back( new_area );
new_area->m_Poly->Start( layer, 1, 10 * NM_PER_MIL, x, y,
hatch );
new_area->m_Poly->Start( layer, x, y, hatch );
return new_area;
}
......@@ -744,7 +743,7 @@ int BOARD::CombineAreas( ZONE_CONTAINER* area_ref, ZONE_CONTAINER* area_to_combi
if( i==0 )
{
area_ref->m_Poly->Start( area_ref->GetLayer(
), 0, 0, x, y, area_ref->m_Poly->GetHatchStyle() );
), x, y, area_ref->m_Poly->GetHatchStyle() );
}
else
area_ref->m_Poly->AppendCorner( x, y );
......@@ -997,38 +996,60 @@ int BOARD::Test_Drc_Areas_Outlines_To_Areas_Outlines( ZONE_CONTAINER* aArea_To_E
/**
* Function doEdgeZoneDrc
* tests the current EDGE_ZONE segment and returns the result and displays the error
* in the status panel only if one exists.
* tests a segment in ZONE_CONTAINER * aArea:
* Test Edge inside other areas
* Test Edge too close other areas
* @param aEdge The current segment to test.
* @param aArea The current area.
* @param aCornerIndex The first corner of the segment to test.
* @return bool - false if DRC error or true if OK
*/
bool DRC::doEdgeZoneDrc( const EDGE_ZONE* aEdge )
bool DRC::doEdgeZoneDrc( ZONE_CONTAINER * aArea, int aCornerIndex )
{
wxString str;
wxPoint start = aArea->GetCornerPosition(aCornerIndex);
wxPoint end;
// Search the end point of the edge starting at aCornerIndex
if( aArea->m_Poly->corner[aCornerIndex].end_contour == FALSE &&
aCornerIndex < (aArea->GetNumCorners() - 1) )
{
end = aArea->GetCornerPosition(aCornerIndex+1);
}
else // aCornerIndex is the last corner of an outline.
// the corresponding end point of the segment is the first corner of the outline
{
int ii = aCornerIndex-1;
end = aArea->GetCornerPosition(ii);
while ( ii >= 0 )
{
if ( aArea->m_Poly->corner[ii].end_contour )
break;
end = aArea->GetCornerPosition(ii);
ii--;
}
}
// iterate through all areas
for( int ia2 = 0; ia2 < m_pcb->GetAreaCount(); ia2++ )
{
ZONE_CONTAINER* Area_To_Test = m_pcb->GetArea( ia2 );
// test for same layer
if( Area_To_Test->GetLayer() != aEdge->GetLayer() )
if( Area_To_Test->GetLayer() != aArea->GetLayer() )
continue;
// Test for same net
if( (aEdge->GetNet() == Area_To_Test->GetNet()) && (aEdge->GetNet() > 0) )
if( (aArea->GetNet() == Area_To_Test->GetNet()) && (aArea->GetNet() > 0) )
continue;
// test for ending line inside Area_To_Test
int x = aEdge->m_End.x;
int y = aEdge->m_End.y;
int x = end.x;
int y = end.y;
if( Area_To_Test->m_Poly->TestPointInside( x, y ) )
{
// COPPERAREA_COPPERAREA error: corner inside copper area
m_currentMarker = fillMarker( aEdge, wxPoint( x, y ),
m_currentMarker = fillMarker( aArea, wxPoint( x, y ),
COPPERAREA_INSIDE_COPPERAREA,
m_currentMarker );
return false;
......@@ -1036,10 +1057,10 @@ bool DRC::doEdgeZoneDrc( const EDGE_ZONE* aEdge )
// now test spacing between areas
int astyle = CPolyLine::STRAIGHT;
int ax1 = aEdge->m_Start.x;
int ay1 = aEdge->m_Start.y;
int ax2 = aEdge->m_End.x;
int ay2 = aEdge->m_End.y;
int ax1 = start.x;
int ay1 = start.y;
int ax2 = end.x;
int ay2 = end.y;
for( int icont2 = 0; icont2 < Area_To_Test->m_Poly->GetNumContours(); icont2++ )
{
int ic_start2 = Area_To_Test->m_Poly->GetContourStart( icont2 );
......@@ -1070,7 +1091,7 @@ bool DRC::doEdgeZoneDrc( const EDGE_ZONE* aEdge )
if( d < g_DesignSettings.m_ZoneClearence )
{
// COPPERAREA_COPPERAREA error : edge intersect or too close
m_currentMarker = fillMarker( aEdge, wxPoint( x, y ),
m_currentMarker = fillMarker( aArea, wxPoint( x, y ),
COPPERAREA_CLOSE_TO_COPPERAREA,
m_currentMarker );
return false;
......
......@@ -22,7 +22,7 @@ using namespace std;
CPolyLine::CPolyLine()
{
m_HatchStyle = 0;
m_sel_box = 0;
m_Width = 0;
utility = 0;
m_gpc_poly = new gpc_polygon;
m_gpc_poly->num_contours = 0;
......@@ -72,7 +72,7 @@ int CPolyLine::NormalizeWithGpc( std::vector<CPolyLine*> * pa, bool bRetainArcs
int x = to_int(((m_gpc_poly->contour)[ic].vertex)[i].x);
int y = to_int(((m_gpc_poly->contour)[ic].vertex)[i].y);
if( i==0 )
Start( m_layer, m_Width, m_sel_box, x, y, m_HatchStyle );
Start( m_layer, x, y, m_HatchStyle );
else
AppendCorner( x, y, STRAIGHT, FALSE );
}
......@@ -89,7 +89,7 @@ int CPolyLine::NormalizeWithGpc( std::vector<CPolyLine*> * pa, bool bRetainArcs
int x = to_int(((m_gpc_poly->contour)[ic].vertex)[i].x);
int y = to_int(((m_gpc_poly->contour)[ic].vertex)[i].y);
if( i==0 )
poly->Start( m_layer, m_Width, m_sel_box, x, y, m_HatchStyle );
poly->Start( m_layer, x, y, m_HatchStyle );
else
poly->AppendCorner( x, y, STRAIGHT, FALSE );
}
......@@ -199,10 +199,7 @@ void CPolyLine::ClipPhpPolygon( int php_op, CPolyLine * poly )
do
{
vertex * v = p->getFirst();
Start( m_layer, m_Width, m_sel_box,
to_int(v->X()*DENOM),
to_int(v->Y()*DENOM),
m_HatchStyle );
Start( m_layer, to_int(v->X()*DENOM), to_int(v->Y()*DENOM), m_HatchStyle );
do
{
vertex * n = v->Next();
......@@ -606,12 +603,9 @@ int CPolyLine::RestoreArcs( std::vector<CArc> * arc_array, std::vector<CPolyLine
// id.i = index to area
// ptr = pointer to net
//
void CPolyLine::Start( int layer, int w, int sel_box, int x, int y,
int hatch )
void CPolyLine::Start( int layer, int x, int y, int hatch )
{
m_layer = layer;
m_Width = w;
m_sel_box = sel_box;
m_HatchStyle = hatch;
CPolyPt poly_pt( x, y );
poly_pt.end_contour = FALSE;
......@@ -1002,7 +996,7 @@ void CPolyLine::Hatch()
int layer = m_layer;
// if( /*m_dlist && */GetClosed() )
if( GetClosed() ) // If not closed, the poly is beeing created and not finalised. Not not hatch
{
enum {
MAXPTS = 100,
......@@ -1082,7 +1076,7 @@ void CPolyLine::Hatch()
{
double x, y, x2, y2;
int ok;
if( corner[ic].end_contour )
if( corner[ic].end_contour || (ic == (int)(corner.size()-1)) )
{
ok = FindLineSegmentIntersection( a, slope,
corner[ic].x, corner[ic].y,
......@@ -1396,7 +1390,7 @@ CPolyLine * CPolyLine::MakePolylineForPad( int type, int x, int y, int w, int l,
}
if( type == PAD_ROUND )
{
poly->Start( 0, 0, 0, x-dx, y, 0 );
poly->Start( 0, x-dx, y, 0 );
poly->AppendCorner( x, y+dy, ARC_CW, 0 );
poly->AppendCorner( x+dx, y, ARC_CW, 0 );
poly->AppendCorner( x, y-dy, ARC_CW, 0 );
......
......@@ -69,8 +69,7 @@ public:
~CPolyLine();
// functions for modifying polyline
void Start( int layer, int w, int sel_box, int x, int y,
int hatch );
void Start( int layer, int x, int y, int hatch );
void AppendCorner( int x, int y, int style = STRAIGHT, bool bDraw=TRUE );
void InsertCorner( int ic, int x, int y );
void DeleteCorner( int ic, bool bDraw=TRUE );
......@@ -138,8 +137,7 @@ public:
private:
int m_layer; // layer to draw on
int m_Width; // line width
int m_sel_box; // corner selection box width/2
int m_Width; // lines width when drawing. Provided but not really used
int utility;
public:
std::vector <CPolyPt> corner; // array of points for corners
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment