Commit a991cb44 authored by Maciej Suminski's avatar Maciej Suminski

Changed the way of refreshing canvases (both standard & GAL).

parent b39d562a
......@@ -222,7 +222,7 @@ void DIALOG_PAGES_SETTINGS::OnOkClick( wxCommandEvent& event )
if( SavePageSettings() )
{
m_screen->SetModify();
m_parent->RefreshCanvas();
m_parent->GetCanvas()->Refresh();
if( m_localPrjConfigChanged )
m_parent->SaveProjectSettings( true );
......
......@@ -234,7 +234,7 @@ void EDA_DRAW_FRAME::OnToggleGridState( wxCommandEvent& aEvent )
m_galCanvas->GetView()->MarkTargetDirty( KiGfx::TARGET_NONCACHED );
}
RefreshCanvas();
m_canvas->Refresh();
}
......@@ -394,7 +394,7 @@ void EDA_DRAW_FRAME::OnSelectGrid( wxCommandEvent& event )
m_galCanvas->GetView()->MarkTargetDirty( KiGfx::TARGET_NONCACHED );
}
RefreshCanvas();
m_canvas->Refresh();
}
......
......@@ -296,6 +296,19 @@ void EDA_DRAW_PANEL::RefreshDrawingRect( const EDA_RECT& aRect, bool aEraseBackg
}
void EDA_DRAW_PANEL::Refresh( bool eraseBackground, const wxRect* rect )
{
if( GetParent()->IsGalCanvasActive() )
{
GetParent()->GetGalCanvas()->Refresh();
}
else
{
wxScrolledWindow::Refresh( eraseBackground, rect );
}
}
wxPoint EDA_DRAW_PANEL::GetScreenCenterLogicalPosition()
{
wxSize size = GetClientSize() / 2;
......
......@@ -52,7 +52,7 @@ void EDA_DRAW_FRAME::RedrawScreen( const wxPoint& aCenterPoint, bool aWarpPointe
if( aWarpPointer )
m_canvas->MoveCursorToCrossHair();
RefreshCanvas();
m_canvas->Refresh();
m_canvas->Update();
}
......@@ -64,17 +64,8 @@ void EDA_DRAW_FRAME::RedrawScreen2( const wxPoint& posBefore )
AdjustScrollBars( newCenter );
RefreshCanvas();
m_canvas->Update();
}
void EDA_DRAW_FRAME::RefreshCanvas()
{
if( m_galCanvasActive )
m_galCanvas->Refresh();
else
m_canvas->Refresh();
m_canvas->Update();
}
......@@ -169,7 +160,7 @@ void EDA_DRAW_FRAME::OnZoom( wxCommandEvent& event )
break;
case ID_ZOOM_REDRAW:
RefreshCanvas();
m_canvas->Refresh();
break;
case ID_POPUP_ZOOM_CENTER:
......
......@@ -317,6 +317,9 @@ public:
*/
void RefreshDrawingRect( const EDA_RECT& aRect, bool aEraseBackground = true );
/// @copydoc wxWindow::Refresh()
virtual void Refresh( bool eraseBackground = true, const wxRect* rect = NULL );
/**
* Function GetScreenCenterLogicalPosition
* @return The current screen center position in logical (drawing) units.
......
......@@ -262,8 +262,8 @@ public:
/**
* Function SetLayerVisible()
* Controls the visibility of a particular layer.
* @param aLayer: the layer to show/hide
* @param aVisible: the obvious
* @param aLayer: the layer to show/hide.
* @param aVisible: the obvious.
*/
inline void SetLayerVisible( int aLayer, bool aVisible = true )
{
......
......@@ -771,12 +771,6 @@ public:
*/
void RedrawScreen2( const wxPoint& posBefore );
/**
* Function RefreshCanvas
* Depending on the current state of GAL - it refreshes the default canvas of the GAL canvas.
*/
void RefreshCanvas();
/**
* Function Zoom_Automatique
* redraws the screen with best zoom level and the best centering
......
......@@ -293,7 +293,7 @@ void PCB_EDIT_FRAME::AutoMoveModulesOnPcb( bool PlaceModulesHorsPcb )
if( newList.GetCount() )
SaveCopyInUndoList( newList, UR_CHANGED );
RefreshCanvas();
m_canvas->Refresh();
}
......
......@@ -505,7 +505,7 @@ void PCB_BASE_FRAME::SwitchLayer( wxDC* DC, LAYER_NUM layer )
GetScreen()->m_Active_Layer = layer;
if( DisplayOpt.ContrastModeDisplay )
RefreshCanvas();
m_canvas->Refresh();
}
......@@ -529,7 +529,7 @@ void PCB_BASE_FRAME::OnTogglePadDrawMode( wxCommandEvent& aEvent )
settings->LoadDisplayOptions( DisplayOpt );
m_galCanvas->GetView()->RecacheAllItems( true );
RefreshCanvas();
m_canvas->Refresh();
}
......@@ -704,8 +704,8 @@ void PCB_BASE_FRAME::SetToolID( int aId, int aCursor, const wxString& aToolMsg )
// must do this after the tool has been set, otherwise pad::Draw() does
// not show proper color when DisplayOpt.ContrastModeDisplay is true.
if( redraw && m_canvas )
RefreshCanvas();
if( redraw && m_canvas)
m_canvas->Refresh();
}
......
......@@ -367,7 +367,7 @@ void PCB_EDIT_FRAME::SaveCopyInUndoList( BOARD_ITEM* aItem,
if( aItem->Type() == PCB_MODULE_T )
if( ((MODULE*)aItem)->GetFlags() & MODULE_to_PLACE )
break;
RefreshCanvas();
m_canvas->Refresh();
#endif
case UR_MOVED:
case UR_FLIPPED:
......@@ -622,7 +622,7 @@ void PCB_EDIT_FRAME::GetBoardFromUndoList( wxCommandEvent& event )
GetScreen()->PushCommandToRedoList( List );
OnModify();
RefreshCanvas();
m_canvas->Refresh();
}
......@@ -650,7 +650,7 @@ void PCB_EDIT_FRAME::GetBoardFromRedoList( wxCommandEvent& event )
GetScreen()->PushCommandToUndoList( List );
OnModify();
RefreshCanvas();
m_canvas->Refresh();
}
......
......@@ -346,7 +346,7 @@ void PCB_LAYER_WIDGET::OnLayerColorChange( LAYER_NUM aLayer, EDA_COLOR_T aColor
{
myframe->GetBoard()->SetLayerColor( aLayer, aColor );
myframe->ReCreateLayerBox( NULL );
myframe->RefreshCanvas();
myframe->GetCanvas()->Refresh();
}
......@@ -359,7 +359,7 @@ bool PCB_LAYER_WIDGET::OnLayerSelect( LAYER_NUM aLayer )
if( m_alwaysShowActiveCopperLayer )
OnLayerSelected();
else if( DisplayOpt.ContrastModeDisplay )
myframe->RefreshCanvas();
myframe->GetCanvas()->Refresh();
return true;
}
......@@ -401,13 +401,13 @@ void PCB_LAYER_WIDGET::OnLayerVisible( LAYER_NUM aLayer, bool isVisible, bool is
}
if( isFinal )
myframe->RefreshCanvas();
myframe->GetCanvas()->Refresh();
}
void PCB_LAYER_WIDGET::OnRenderColorChange( int aId, EDA_COLOR_T aColor )
{
myframe->GetBoard()->SetVisibleElementColor( aId, aColor );
myframe->RefreshCanvas();
myframe->GetCanvas()->Refresh();
}
void PCB_LAYER_WIDGET::OnRenderEnable( int aId, bool isEnabled )
......@@ -425,7 +425,7 @@ void PCB_LAYER_WIDGET::OnRenderEnable( int aId, bool isEnabled )
if( myframe->IsGalCanvasActive() )
galCanvas->Refresh();
else
myframe->RefreshCanvas();
myframe->GetCanvas()->Refresh();
}
//-----</LAYER_WIDGET callbacks>------------------------------------------
......@@ -180,7 +180,7 @@ void DIALOG_DISPLAY_OPTIONS::OnOkClick(wxCommandEvent& event)
if( m_Parent->IsGalCanvasActive() )
m_Parent->GetGalCanvas()->Refresh();
else
m_Parent->RefreshCanvas();
m_Parent->GetCanvas()->Refresh();
EndModal( 1 );
}
......@@ -548,7 +548,7 @@ void DIALOG_DRC_CONTROL::OnUnconnectedSelectionEvent( wxCommandEvent& event )
void DIALOG_DRC_CONTROL::RedrawDrawPanel()
{
m_Parent->RefreshCanvas();
m_Parent->GetCanvas()->Refresh();
}
......
......@@ -185,7 +185,7 @@ void PCB_EDIT_FRAME::OnSelectOptionToolbar( wxCommandEvent& event )
if( state && (GetBoard()->m_Status_Pcb & LISTE_RATSNEST_ITEM_OK) == 0 )
Compile_Ratsnest( NULL, true );
RefreshCanvas();
m_canvas->Refresh();
break;
case ID_TB_OPTIONS_SHOW_MODULE_RATSNEST:
......@@ -199,36 +199,31 @@ void PCB_EDIT_FRAME::OnSelectOptionToolbar( wxCommandEvent& event )
case ID_TB_OPTIONS_SHOW_ZONES:
DisplayOpt.DisplayZonesMode = 0;
recache = true;
if( !m_galCanvasActive )
RefreshCanvas();
m_canvas->Refresh();
break;
case ID_TB_OPTIONS_SHOW_ZONES_DISABLE:
DisplayOpt.DisplayZonesMode = 1;
recache = true;
if( !m_galCanvasActive )
RefreshCanvas();
m_canvas->Refresh();
break;
case ID_TB_OPTIONS_SHOW_ZONES_OUTLINES_ONLY:
DisplayOpt.DisplayZonesMode = 2;
recache = true;
if( !m_galCanvasActive )
RefreshCanvas();
m_canvas->Refresh();
break;
case ID_TB_OPTIONS_SHOW_VIAS_SKETCH:
m_DisplayViaFill = DisplayOpt.DisplayViaFill = !state;
recache = true;
if( !m_galCanvasActive )
RefreshCanvas();
m_canvas->Refresh();
break;
case ID_TB_OPTIONS_SHOW_TRACKS_SKETCH:
m_DisplayPcbTrackFill = DisplayOpt.DisplayPcbTrackFill = !state;
recache = true;
if( !m_galCanvasActive )
RefreshCanvas();
m_canvas->Refresh();
break;
case ID_TB_OPTIONS_SHOW_HIGH_CONTRAST_MODE:
......@@ -239,12 +234,7 @@ void PCB_EDIT_FRAME::OnSelectOptionToolbar( wxCommandEvent& event )
settings->LoadDisplayOptions( DisplayOpt );
setHighContrastLayer( getActiveLayer() );
// m_galCanvas->GetView()->EnableTopLayer( state );
if( m_galCanvasActive )
m_galCanvas->Refresh();
else
RefreshCanvas();
m_canvas->Refresh();
break;
}
......
......@@ -182,7 +182,7 @@ void DIALOG_GLOBAL_DELETION::AcceptPcbDelete( )
m_Parent->Compile_Ratsnest( NULL, true );
}
m_Parent->RefreshCanvas();
m_Parent->GetCanvas()->Refresh();
m_Parent->OnModify();
EndModal( 1 );
......
......@@ -206,7 +206,7 @@ void DIALOG_GLOBAL_EDIT_TRACKS_AND_VIAS::OnOkClick( wxCommandEvent& event )
EndModal( 1 );
if( change )
m_Parent->RefreshCanvas();
m_Parent->GetCanvas()->Refresh();
}
......
......@@ -136,7 +136,7 @@ void PCB_EDIT_FRAME::OnResetModuleTextSizes( wxCommandEvent& event )
DIALOG_GLOBAL_MODULES_FIELDS_EDITION dlg(this);
dlg.ShowModal();
RefreshCanvas();
m_canvas->Refresh();
}
void PCB_BASE_FRAME::ResetModuleTextSizes( const wxString & aFilter, bool aRef,
......
......@@ -104,7 +104,7 @@ void PCB_EDIT_FRAME::OnOrientFootprints( wxCommandEvent& event )
if( ReOrientModules( text, dlg.GetOrientation(), dlg.ApplyToLockedModules() ) )
{
RefreshCanvas();
m_canvas->Refresh();
Compile_Ratsnest( NULL, true );
}
}
......
......@@ -223,7 +223,7 @@ bool PCB_BASE_FRAME::InvokeDialogGrid()
if( GetScreen()->GetGridId() == ID_POPUP_GRID_USER )
GetScreen()->SetGrid( ID_POPUP_GRID_USER );
RefreshCanvas();
m_canvas->Refresh();
return true;
}
......
......@@ -399,7 +399,7 @@ void PCB_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
GetDesignSettings().m_CurrentViaType = v_type;
if( DisplayOpt.ContrastModeDisplay )
RefreshCanvas();
m_canvas->Refresh();
}
break;
......@@ -572,7 +572,7 @@ void PCB_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
case ID_POPUP_PCB_FILL_ALL_ZONES:
m_canvas->MoveCursorToCrossHair();
Fill_All_Zones( this );
RefreshCanvas();
m_canvas->Refresh();
SetMsgPanel( GetBoard() );
break;
......@@ -584,7 +584,7 @@ void PCB_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
TestNetConnection( NULL, zone_container->GetNet() );
OnModify();
SetMsgPanel( GetBoard() );
RefreshCanvas();
m_canvas->Refresh();
}
SetCurItem( NULL );
break;
......@@ -604,7 +604,7 @@ void PCB_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
TestForActiveLinksInRatsnest( 0 ); // Recalculate the active ratsnest, i.e. the unconnected links
OnModify();
SetMsgPanel( GetBoard() );
RefreshCanvas();
m_canvas->Refresh();
break;
case ID_POPUP_PCB_FILL_ZONE:
......@@ -612,7 +612,7 @@ void PCB_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
Fill_Zone( (ZONE_CONTAINER*) GetCurItem() );
TestNetConnection( NULL, ( (ZONE_CONTAINER*) GetCurItem() )->GetNet() );
SetMsgPanel( GetBoard() );
RefreshCanvas();
m_canvas->Refresh();
break;
case ID_POPUP_PCB_MOVE_TEXTEPCB_REQUEST:
......@@ -1040,7 +1040,7 @@ void PCB_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
Delete_Drawings_All_Layer( GetCurItem()->GetLayer() );
SetCurItem( NULL );
m_canvas->MoveCursorToCrossHair();
RefreshCanvas();
m_canvas->Refresh();
break;
case ID_POPUP_PCB_EDIT_DRAWING:
......@@ -1291,7 +1291,7 @@ void PCB_EDIT_FRAME::SwitchLayer( wxDC* DC, LAYER_NUM layer )
if( Other_Layer_Route( (TRACK*) GetScreen()->GetCurItem(), DC ) )
{
if( DisplayOpt.ContrastModeDisplay )
RefreshCanvas();
m_canvas->Refresh();
}
// if the via was allowed by DRC, then the layer swap has already
......@@ -1310,7 +1310,7 @@ void PCB_EDIT_FRAME::SwitchLayer( wxDC* DC, LAYER_NUM layer )
setActiveLayer( layer );
if( DisplayOpt.ContrastModeDisplay )
RefreshCanvas();
m_canvas->Refresh();
}
......
......@@ -126,7 +126,7 @@ void PCB_EDIT_FRAME::Place_Texte_Pcb( TEXTE_PCB* TextePcb, wxDC* DC )
TextePcb->ClearFlags();
#ifdef USE_WX_OVERLAY
RefreshCanvas();
m_canvas->Refresh();
#endif
}
......@@ -144,7 +144,7 @@ void PCB_EDIT_FRAME::StartMoveTextePcb( TEXTE_PCB* aTextePcb, wxDC* aDC, bool aE
SetMsgPanel( aTextePcb );
#ifdef USE_WX_OVERLAY
RefreshCanvas();
m_canvas->Refresh();
#endif
SetCrossHairPosition( aTextePcb->GetTextPosition() );
......@@ -257,7 +257,7 @@ void PCB_EDIT_FRAME::Rotate_Texte_Pcb( TEXTE_PCB* TextePcb, wxDC* DC )
OnModify();
#ifdef USE_WX_OVERLAY
RefreshCanvas();
m_canvas->Refresh();
#endif
}
......@@ -281,6 +281,6 @@ void PCB_EDIT_FRAME::FlipTextePcb( TEXTE_PCB* aTextePcb, wxDC* aDC )
OnModify();
#ifdef USE_WX_OVERLAY
RefreshCanvas();
m_canvas->Refresh();
#endif
}
......@@ -68,7 +68,7 @@ void PCB_EDIT_FRAME::InstallModuleOptionsFrame( MODULE* Module, wxDC* DC )
#ifdef __WXMAC__
// If something edited, push a refresh request
if (retvalue == 0 || retvalue == 1)
RefreshCanvas();
m_canvas->Refresh();
#endif
if( retvalue == 2 )
......@@ -120,7 +120,7 @@ void FOOTPRINT_EDIT_FRAME::RemoveStruct( EDA_ITEM* Item )
case PCB_MODULE_EDGE_T:
Delete_Edge_Module( (EDGE_MODULE*) Item );
RefreshCanvas();
m_canvas->Refresh();
break;
case PCB_MODULE_T:
......
......@@ -349,7 +349,7 @@ void PCB_BASE_FRAME::ResetTextSize( BOARD_ITEM* aItem, wxDC* aDC )
text->SetThickness( newThickness );
if( aDC )
RefreshCanvas();
m_canvas->Refresh();
OnModify();
}
......@@ -118,5 +118,5 @@ void PCB_EDIT_FRAME::Tracks_and_Vias_Size_Event( wxCommandEvent& event )
}*/
//+hp
//Refresh canvas, that we can see changes instantly. I use this because it dont,t throw mouse up-left corner.
RefreshCanvas();
m_canvas->Refresh();
}
......@@ -120,7 +120,7 @@ void FOOTPRINT_WIZARD_FRAME::ReloadFootprint()
DBG(printf( "footprintWizard->GetModule() returns NULL\n" );)
}
RefreshCanvas();
m_canvas->Refresh();
}
......
......@@ -409,7 +409,7 @@ void FOOTPRINT_WIZARD_FRAME::ReCreatePageList()
ReCreateParameterList();
ReCreateHToolbar();
DisplayWizardInfos();
RefreshCanvas();
m_canvas->Refresh();
}
......@@ -507,7 +507,7 @@ void FOOTPRINT_WIZARD_FRAME::ClickOnPageList( wxCommandEvent& event )
return;
ReCreateParameterList();
RefreshCanvas();
m_canvas->Refresh();
DisplayWizardInfos();
}
......
......@@ -366,7 +366,7 @@ void PCB_EDIT_FRAME::OnHotKey( wxDC* aDC, int aHotkeyCode, const wxPoint& aPosit
DisplayOpt.DisplayPcbTrackFill ^= 1;
DisplayOpt.DisplayPcbTrackFill &= 1;
m_DisplayPcbTrackFill = DisplayOpt.DisplayPcbTrackFill;
RefreshCanvas();
m_canvas->Refresh();
break;
case HK_DELETE:
......@@ -463,7 +463,7 @@ void PCB_EDIT_FRAME::OnHotKey( wxDC* aDC, int aHotkeyCode, const wxPoint& aPosit
{
Other_Layer_Route( NULL, aDC );
if( DisplayOpt.ContrastModeDisplay )
RefreshCanvas();
m_canvas->Refresh();
break;
}
......@@ -546,7 +546,7 @@ void PCB_EDIT_FRAME::OnHotKey( wxDC* aDC, int aHotkeyCode, const wxPoint& aPosit
case HK_SWITCH_HIGHCONTRAST_MODE: // switch to high contrast mode and refresh the canvas
DisplayOpt.ContrastModeDisplay = !DisplayOpt.ContrastModeDisplay;
RefreshCanvas();
m_canvas->Refresh();
break;
case HK_CANVAS_CAIRO:
......
......@@ -541,7 +541,7 @@ void FOOTPRINT_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
GetScreen()->GetCurItem()->ClearFlags();
if( ret > 0 )
RefreshCanvas();
m_canvas->Refresh();
}
break;
......@@ -571,7 +571,7 @@ void FOOTPRINT_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
m_canvas->MoveCursorToCrossHair();
if( ret > 0 )
RefreshCanvas();
m_canvas->Refresh();
}
break;
......@@ -660,38 +660,38 @@ void FOOTPRINT_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
m_canvas->MoveCursorToCrossHair();
if( edge )
RefreshCanvas();
m_canvas->Refresh();
}
break;
case ID_POPUP_MODEDIT_EDIT_BODY_ITEM :
m_canvas->MoveCursorToCrossHair();
InstallFootprintBodyItemPropertiesDlg( (EDGE_MODULE*) GetScreen()->GetCurItem() );
RefreshCanvas();
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_WIDTH_CURRENT_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Width( (EDGE_MODULE*) GetScreen()->GetCurItem() );
RefreshCanvas();
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_WIDTH_ALL_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Width( NULL );
RefreshCanvas();
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_LAYER_CURRENT_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Layer( (EDGE_MODULE*) GetScreen()->GetCurItem() );
RefreshCanvas();
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_LAYER_ALL_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Layer( NULL );
RefreshCanvas();
m_canvas->Refresh();
break;
case ID_POPUP_PCB_DELETE_EDGE:
......@@ -774,7 +774,7 @@ void FOOTPRINT_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
}
if( redraw )
RefreshCanvas();
m_canvas->Refresh();
}
......
......@@ -97,13 +97,13 @@ void FOOTPRINT_EDIT_FRAME::OnLeftClick( wxDC* DC, const wxPoint& MousePos )
{
End_Edge_Module( (EDGE_MODULE*) item );
SetCurItem( NULL );
RefreshCanvas();
m_canvas->Refresh();
}
else if( ( (EDGE_MODULE*) item )->GetShape() == S_ARC )
{
End_Edge_Module( (EDGE_MODULE*) item );
SetCurItem( NULL );
RefreshCanvas();
m_canvas->Refresh();
}
else if( ( (EDGE_MODULE*) item )->GetShape() == S_SEGMENT )
{
......@@ -149,7 +149,7 @@ void FOOTPRINT_EDIT_FRAME::OnLeftClick( wxDC* DC, const wxPoint& MousePos )
// so deselect the active tool
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
SetCurItem( NULL );
RefreshCanvas();
m_canvas->Refresh();
}
break;
......@@ -435,7 +435,7 @@ void FOOTPRINT_EDIT_FRAME::OnLeftDClick( wxDC* DC, const wxPoint& MousePos )
m_canvas->MoveCursorToCrossHair();
if( ret > 0 )
RefreshCanvas();
m_canvas->Refresh();
}
break;
......@@ -447,7 +447,7 @@ void FOOTPRINT_EDIT_FRAME::OnLeftDClick( wxDC* DC, const wxPoint& MousePos )
case PCB_MODULE_EDGE_T :
m_canvas->MoveCursorToCrossHair();
InstallFootprintBodyItemPropertiesDlg( (EDGE_MODULE*) item );
RefreshCanvas();
m_canvas->Refresh();
break;
default:
......@@ -462,7 +462,7 @@ void FOOTPRINT_EDIT_FRAME::OnLeftDClick( wxDC* DC, const wxPoint& MousePos )
{
End_Edge_Module( (EDGE_MODULE*) item );
SetCurItem( NULL );
RefreshCanvas();
m_canvas->Refresh();
}
break;
......
......@@ -72,7 +72,7 @@ void FOOTPRINT_EDIT_FRAME::GetComponentFromRedoList( wxCommandEvent& event )
SetCurItem( NULL );
OnModify();
RefreshCanvas();
m_canvas->Refresh();
}
......@@ -101,5 +101,5 @@ void FOOTPRINT_EDIT_FRAME::GetComponentFromUndoList( wxCommandEvent& event )
SetCurItem( NULL );
OnModify();
RefreshCanvas();
m_canvas->Refresh();
}
......@@ -285,7 +285,7 @@ bool PCB_EDIT_FRAME::Delete_Module( MODULE* aModule, wxDC* aDC, bool aAskBeforeD
// Redraw the full screen to ensure perfect display of board and ratsnest.
if( aDC )
RefreshCanvas();
m_canvas->Refresh();
return true;
}
......@@ -421,7 +421,7 @@ void PCB_BASE_FRAME::PlaceModule( MODULE* aModule, wxDC* aDC, bool aDoNotRecreat
Compile_Ratsnest( aDC, true );
if( aDC )
RefreshCanvas();
m_canvas->Refresh();
SetMsgPanel( aModule );
}
......@@ -490,7 +490,7 @@ void PCB_BASE_FRAME::Rotate_Module( wxDC* DC, MODULE* module, double angle, bool
}
if( module->GetFlags() == 0 ) // module not in edit: redraw full screen
RefreshCanvas();
m_canvas->Refresh();
}
}
......
......@@ -165,7 +165,7 @@ void FOOTPRINT_VIEWER_FRAME::SelectCurrentFootprint( wxCommandEvent& event )
SetCurItem( NULL );
Zoom_Automatique( false );
RefreshCanvas();
m_canvas->Refresh();
Update3D_Frame();
m_FootprintList->SetStringSelection( m_footprintName );
}
......
......@@ -411,7 +411,7 @@ void FOOTPRINT_VIEWER_FRAME::ReCreateLibraryList()
ReCreateFootprintList();
ReCreateHToolbar();
DisplayLibInfos();
RefreshCanvas();
m_canvas->Refresh();
}
......@@ -477,7 +477,7 @@ void FOOTPRINT_VIEWER_FRAME::ClickOnLibList( wxCommandEvent& event )
m_libraryName = name;
ReCreateFootprintList();
RefreshCanvas();
m_canvas->Refresh();
DisplayLibInfos();
ReCreateHToolbar();
}
......@@ -525,7 +525,7 @@ void FOOTPRINT_VIEWER_FRAME::ClickOnFootprintList( wxCommandEvent& event )
DisplayLibInfos();
Zoom_Automatique( false );
RefreshCanvas();
m_canvas->Refresh();
Update3D_Frame();
}
}
......
......@@ -892,7 +892,7 @@ bool PCB_EDIT_FRAME::PlaceDraggedOrMovedTrackSegment( TRACK* Track, wxDC* DC )
if( current_net_code > 0 )
TestNetConnection( DC, current_net_code );
RefreshCanvas();
m_canvas->Refresh();
return true;
}
......@@ -112,7 +112,7 @@ void PCB_EDIT_FRAME::ReadPcbNetlist( const wxString& aNetlistFileName,
// Rebuild the board connectivity:
Compile_Ratsnest( NULL, true );
SetMsgPanel( GetBoard() );
RefreshCanvas();
m_canvas->Refresh();
}
......
......@@ -243,7 +243,7 @@ void PCB_BASE_FRAME::SelectLayerPair()
// because the PAD_SMD pads may change color.
if( result >= 0 && DisplayOpt.ContrastModeDisplay )
{
RefreshCanvas();
m_canvas->Refresh();
}
}
......
......@@ -281,7 +281,7 @@ void DIALOG_EXCHANGE_MODULE::Change_Current_Module()
if( m_Parent->GetBoard()->IsElementVisible( RATSNEST_VISIBLE ) )
m_Parent->Compile_Ratsnest( NULL, true );
m_Parent->RefreshCanvas();
m_Parent->GetCanvas()->Refresh();
}
if( pickList.GetCount() )
......@@ -370,7 +370,7 @@ void DIALOG_EXCHANGE_MODULE::Change_ModuleId( bool aUseValue )
if( m_Parent->GetBoard()->IsElementVisible( RATSNEST_VISIBLE ) )
m_Parent->Compile_Ratsnest( NULL, true );
m_Parent->RefreshCanvas();
m_Parent->GetCanvas()->Refresh();
}
if( pickList.GetCount() )
......@@ -423,7 +423,7 @@ void DIALOG_EXCHANGE_MODULE::Change_ModuleAll()
if( m_Parent->GetBoard()->IsElementVisible( RATSNEST_VISIBLE ) )
m_Parent->Compile_Ratsnest( NULL, true );
m_Parent->RefreshCanvas();
m_Parent->GetCanvas()->Refresh();
}
if( pickList.GetCount() )
......
......@@ -333,7 +333,7 @@ void PCB_EDIT_FRAME::End_Move_Zone_Corner_Or_Outlines( wxDC* DC, ZONE_CONTAINER*
// Combine zones if possible
wxBusyCursor dummy;
GetBoard()->OnAreaPolygonModified( &s_AuxiliaryList, aZone );
RefreshCanvas();
m_canvas->Refresh();
int ii = GetBoard()->GetAreaIndex( aZone ); // test if aZone exists
......
......@@ -80,7 +80,7 @@ void PCB_EDIT_FRAME::Delete_OldZone_Fill( SEGZONE* aZone, time_t aTimestamp )
if( modify )
{
OnModify();
RefreshCanvas();
m_canvas->Refresh();
}
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment