Skip to content

K
kicad-source-mirror
Commit 9cfb97d8 authored by jean-pierre charras's avatar jean-pierre charras
Browse files
Options

Add hight contrast option in Modedit. In hight contrast mode, solder masks and... 

Add hight contrast option in Modedit. In hight contrast mode, solder masks and solder paste are shown.
this option was possible only by modifying the way display options are managed.
before these changes, display options were a global DISPLAY_OPTIONS class instance.
Now each EDA_DRAW_FRAME(and derivated classes)  includes its own DISPLAY_OPTIONS class instance.
As a consequence, some duplicate display option variables in these classes have been removed, because there were just duplicate variables of the  DISPLAY_OPTIONS class instance.
parent 6cf3b937
Show whitespace changes
Inline Side-by-side
Showing with 472 additions and 400 deletions
common/draw_panel.cpp
View file @ 9cfb97d8
......@@ -172,6 +172,12 @@ EDA_DRAW_FRAME* EDA_DRAW_PANEL::GetParent() const
}
void* EDA_DRAW_PANEL::GetDisplayOptions()
{
return GetParent()->GetDisplayOptions();
}
BASE_SCREEN* EDA_DRAW_PANEL::GetScreen()
{
EDA_DRAW_FRAME* parentFrame = GetParent();
......
cvpcb/class_DisplayFootprintsFrame.cpp
View file @ 9cfb97d8
......@@ -53,9 +53,6 @@
#include <3d_viewer.h>
DISPLAY_OPTIONS DisplayOpt; // General display options
BEGIN_EVENT_TABLE( DISPLAY_FOOTPRINTS_FRAME, PCB_BASE_FRAME )
EVT_CLOSE( DISPLAY_FOOTPRINTS_FRAME::OnCloseWindow )
EVT_SIZE( DISPLAY_FOOTPRINTS_FRAME::OnSize )
......@@ -100,10 +97,11 @@ DISPLAY_FOOTPRINTS_FRAME::DISPLAY_FOOTPRINTS_FRAME( KIWAY* aKiway, CVPCB_MAINFRA
GetScreen()->SetGrid( ID_POPUP_GRID_LEVEL_1000 + m_LastGridSizeId );
// Initialize some display options
DisplayOpt.DisplayPadIsol = false; // Pad clearance has no meaning here
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
displ_opts->m_DisplayPadIsol = false; // Pad clearance has no meaning here
// Track and via clearance has no meaning here.
DisplayOpt.ShowTrackClearanceMode = DO_NOT_SHOW_CLEARANCE;
displ_opts->m_ShowTrackClearanceMode = DO_NOT_SHOW_CLEARANCE;
SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y );
ReCreateHToolbar();
......@@ -248,34 +246,36 @@ void DISPLAY_FOOTPRINTS_FRAME::ReCreateHToolbar()
void DISPLAY_FOOTPRINTS_FRAME::OnUpdateTextDrawMode( wxUpdateUIEvent& aEvent )
{
wxString msgTextsFill[3] = { _( "Show texts in line mode" ),
_( "Show texts in filled mode" ),
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
wxString msgTextsFill[2] = { _( "Show texts in filled mode" ),
_( "Show texts in sketch mode" ) };
unsigned i = m_DisplayModText + 1;
unsigned i = displ_opts->m_DisplayModText + 1;
if ( i > 2 )
i = 0;
i = 1;
aEvent.Check( m_DisplayModText == 0 );
m_optionsToolBar->SetToolShortHelp( ID_TB_OPTIONS_SHOW_MODULE_TEXT_SKETCH, msgTextsFill[i] );
aEvent.Check( displ_opts->m_DisplayModText == 1 );
m_optionsToolBar->SetToolShortHelp( ID_TB_OPTIONS_SHOW_MODULE_TEXT_SKETCH, msgTextsFill[i-1] );
}
void DISPLAY_FOOTPRINTS_FRAME::OnUpdateLineDrawMode( wxUpdateUIEvent& aEvent )
{
wxString msgEdgesFill[3] = { _( "Show outlines in line mode" ),
_( "Show outlines in filled mode" ),
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
wxString msgEdgesFill[3] = { _( "Show outlines in filled mode" ),
_( "Show outlines in sketch mode" ) };
int i = m_DisplayModEdge + 1;
int i = displ_opts->m_DisplayModEdge + 1;
if ( i > 2 )
i = 0;
i = 1;
aEvent.Check( m_DisplayModEdge == 0 );
m_optionsToolBar->SetToolShortHelp( ID_TB_OPTIONS_SHOW_MODULE_EDGE_SKETCH, msgEdgesFill[i] );
aEvent.Check( displ_opts->m_DisplayModEdge == 2 );
m_optionsToolBar->SetToolShortHelp( ID_TB_OPTIONS_SHOW_MODULE_EDGE_SKETCH, msgEdgesFill[i-1] );
}
......@@ -298,23 +298,24 @@ bool DISPLAY_FOOTPRINTS_FRAME::OnRightClick( const wxPoint& MousePos, wxMenu* Po
void DISPLAY_FOOTPRINTS_FRAME::OnSelectOptionToolbar( wxCommandEvent& event )
{
int id = event.GetId();
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
switch( id )
{
case ID_TB_OPTIONS_SHOW_MODULE_TEXT_SKETCH:
m_DisplayModText++;
displ_opts->m_DisplayModText++;
if( m_DisplayModText > 2 )
m_DisplayModText = 0;
if( displ_opts->m_DisplayModText > 2 )
displ_opts->m_DisplayModText = 0;
m_canvas->Refresh( );
break;
case ID_TB_OPTIONS_SHOW_MODULE_EDGE_SKETCH:
m_DisplayModEdge++;
displ_opts->m_DisplayModEdge++;
if( m_DisplayModEdge > 2 )
m_DisplayModEdge = 0;
if( displ_opts->m_DisplayModEdge > 2 )
displ_opts->m_DisplayModEdge = 0;
m_canvas->Refresh();
break;
......
cvpcb/dialogs/dialog_display_options.cpp
View file @ 9cfb97d8
......@@ -72,10 +72,12 @@ void DIALOG_FOOTPRINTS_DISPLAY_OPTIONS::initDialog()
/* mandatory to use escape key as cancel under wxGTK. */
SetFocus();
m_EdgesDisplayOption->SetSelection( m_Parent->m_DisplayModEdge );
m_TextDisplayOption->SetSelection( m_Parent->m_DisplayModText );
m_IsShowPadFill->SetValue( m_Parent->m_DisplayPadFill );
m_IsShowPadNum->SetValue( m_Parent->m_DisplayPadNum );
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)m_Parent->GetDisplayOptions();
m_EdgesDisplayOption->SetSelection( displ_opts->m_DisplayModEdge );
m_TextDisplayOption->SetSelection( displ_opts->m_DisplayModText );
m_IsShowPadFill->SetValue( displ_opts->m_DisplayPadFill );
m_IsShowPadNum->SetValue( displ_opts->m_DisplayPadNum );
m_IsZoomNoCenter->SetValue( m_Parent->GetCanvas()->GetEnableZoomNoCenter() );
m_IsMiddleButtonPan->SetValue( m_Parent->GetCanvas()->GetEnableMiddleButtonPan() );
m_IsMiddleButtonPanLimited->SetValue( m_Parent->GetCanvas()->GetMiddleButtonPanLimited() );
......@@ -90,10 +92,12 @@ void DIALOG_FOOTPRINTS_DISPLAY_OPTIONS::initDialog()
void DIALOG_FOOTPRINTS_DISPLAY_OPTIONS::UpdateObjectSettings( void )
{
m_Parent->m_DisplayModEdge = m_EdgesDisplayOption->GetSelection();
m_Parent->m_DisplayModText = m_TextDisplayOption->GetSelection();
m_Parent->m_DisplayPadNum = m_IsShowPadNum->GetValue();
m_Parent->m_DisplayPadFill = m_IsShowPadFill->GetValue();
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)m_Parent->GetDisplayOptions();
displ_opts->m_DisplayModEdge = m_EdgesDisplayOption->GetSelection();
displ_opts->m_DisplayModText = m_TextDisplayOption->GetSelection();
displ_opts->m_DisplayPadNum = m_IsShowPadNum->GetValue();
displ_opts->m_DisplayPadFill = m_IsShowPadFill->GetValue();
m_Parent->GetCanvas()->SetEnableZoomNoCenter( m_IsZoomNoCenter->GetValue() );
m_Parent->GetCanvas()->SetEnableMiddleButtonPan( m_IsMiddleButtonPan->GetValue() );
m_Parent->GetCanvas()->SetMiddleButtonPanLimited( m_IsMiddleButtonPanLimited->GetValue() );
......
include/class_drawpanel.h
View file @ 9cfb97d8
......@@ -121,6 +121,13 @@ public:
EDA_DRAW_PANEL( EDA_DRAW_FRAME* parent, int id, const wxPoint& pos, const wxSize& size );
~EDA_DRAW_PANEL();
/**
* Function GetDisplayOptions
* A way to pass info to draw functions.
* this is just an accessor to the GetDisplayOptions() parent frame function.
*/
void* GetDisplayOptions();
BASE_SCREEN* GetScreen();
EDA_DRAW_FRAME* GetParent() const;
......
include/draw_frame.h
View file @ 9cfb97d8
......@@ -730,6 +730,14 @@ public:
EDA_DRAW_PANEL_GAL* GetGalCanvas() const { return m_galCanvas; }
void SetGalCanvas( EDA_DRAW_PANEL_GAL* aPanel ) { m_galCanvas = aPanel; }
/**
* Function GetDisplayOptions
* A way to pass info to draw functions. the base class has no knowledge about
* these options. It is virtual because this function must be overloaded to
* pass usefull info.
*/
virtual void* GetDisplayOptions() { return NULL; }
DECLARE_EVENT_TABLE()
};
......
include/pcbstruct.h
View file @ 9cfb97d8
......@@ -71,32 +71,33 @@ enum TRACE_CLEARANCE_DISPLAY_MODE_T {
class DISPLAY_OPTIONS
{
public:
bool DisplayPadFill;
bool DisplayViaFill;
bool DisplayPadNum;
bool DisplayPadIsol;
int DisplayModEdge;
int DisplayModText;
bool DisplayPcbTrackFill; /* false = sketch , true = filled */
bool m_DisplayPadFill;
bool m_DisplayViaFill;
bool m_DisplayPadNum; // show pads numbers
bool m_DisplayPadIsol;
int m_DisplayModEdge; // How to display module drawings (line/ filled / sketch)
int m_DisplayModText; // How to display module texts (line/ filled / sketch)
bool m_DisplayPcbTrackFill; // false : tracks are show in sketch mode, true = filled.
/// How trace clearances are displayed. @see TRACE_CLEARANCE_DISPLAY_MODE_T.
TRACE_CLEARANCE_DISPLAY_MODE_T ShowTrackClearanceMode;
TRACE_CLEARANCE_DISPLAY_MODE_T m_ShowTrackClearanceMode;
VIA_DISPLAY_MODE_T m_DisplayViaMode; /* 0 do not show via hole,
* 1 show via hole for non default value
* 2 show all via hole */
bool DisplayPolarCood;
int DisplayZonesMode;
int DisplayNetNamesMode; /* 0 do not show netnames,
bool m_DisplayPolarCood;
int m_DisplayZonesMode;
int m_DisplayNetNamesMode; /* 0 do not show netnames,
* 1 show netnames on pads
* 2 show netnames on tracks
* 3 show netnames on tracks and pads
*/
int DisplayDrawItems;
bool ContrastModeDisplay;
int m_DisplayDrawItems;
bool m_ContrastModeDisplay;
int m_MaxLinksShowed; // in track creation: number of hairwires shown
bool m_Show_Module_Ratsnest; // When moving a footprint: allows displaying a ratsnest
public:
DISPLAY_OPTIONS();
......
include/wxBasePcbFrame.h
View file @ 9cfb97d8
......@@ -39,6 +39,7 @@
#include <eda_text.h> // EDA_DRAW_MODE_T
#include <richio.h>
#include <class_pcb_screen.h>
#include <pcbstruct.h>
/* Forward declarations of classes. */
......@@ -66,13 +67,7 @@ class TOOL_DISPATCHER;
class PCB_BASE_FRAME : public EDA_DRAW_FRAME
{
public:
bool m_DisplayPadFill; // How show pads
bool m_DisplayViaFill; // How show vias
bool m_DisplayPadNum; // show pads numbers
int m_DisplayModEdge; // How to display module drawings (line/ filled / sketch)
int m_DisplayModText; // How to display module texts (line/ filled / sketch)
bool m_DisplayPcbTrackFill; // false : tracks are show in sketch mode, true = filled.
DISPLAY_OPTIONS m_DisplayOptions;
EDA_UNITS_T m_UserGridUnit;
wxRealPoint m_UserGridSize;
......@@ -156,6 +151,16 @@ public:
virtual BOARD_DESIGN_SETTINGS& GetDesignSettings() const;
virtual void SetDesignSettings( const BOARD_DESIGN_SETTINGS& aSettings );
/**
* Function GetDisplayOptions
* returns the display options current in use
* Display options are relative to the way tracks, vias, outlines
* and other things are shown (for instance solid or sketch mode)
* Must be overloaded in frames which have display options
* (board editor and footprint editor)
*/
void* GetDisplayOptions() { return &m_DisplayOptions; }
const ZONE_SETTINGS& GetZoneSettings() const;
void SetZoneSettings( const ZONE_SETTINGS& aSettings );
......
pcbnew/autorouter/auto_place_footprints.cpp
View file @ 9cfb97d8
......@@ -619,12 +619,13 @@ int getOptimalModulePlacement( PCB_EDIT_FRAME* aFrame, MODULE* aModule, wxDC* aD
wxPoint LastPosOK;
double min_cost, curr_cost, Score;
bool TstOtherSide;
bool showRats = g_Show_Module_Ratsnest;
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)aFrame->GetDisplayOptions();
BOARD* brd = aFrame->GetBoard();
aModule->CalculateBoundingBox();
g_Show_Module_Ratsnest = false;
bool showRats = displ_opts->m_Show_Module_Ratsnest;
displ_opts->m_Show_Module_Ratsnest = false;
brd->m_Status_Pcb &= ~RATSNEST_ITEM_LOCAL_OK;
aFrame->SetMsgPanel( aModule );
......@@ -735,7 +736,7 @@ int getOptimalModulePlacement( PCB_EDIT_FRAME* aFrame, MODULE* aModule, wxDC* aD
// erasing the last traces
GRRect( aFrame->GetCanvas()->GetClipBox(), aDC, fpBBox, 0, BROWN );
g_Show_Module_Ratsnest = showRats;
displ_opts->m_Show_Module_Ratsnest = showRats;
// Regeneration of the modified variable.
CurrPosition = LastPosOK;
......
pcbnew/basepcbframe.cpp
View file @ 9cfb97d8
......@@ -98,14 +98,6 @@ PCB_BASE_FRAME::PCB_BASE_FRAME( KIWAY* aKiway, wxWindow* aParent, FRAME_T aFrame
m_Pcb = NULL;
m_toolManager = NULL;
m_toolDispatcher = NULL;
m_DisplayPadFill = true; // How to draw pads
m_DisplayViaFill = true; // How to draw vias
m_DisplayPadNum = true; // show pads number
m_DisplayModEdge = FILLED; // How to display module drawings (line/ filled / sketch)
m_DisplayModText = FILLED; // How to display module texts (line/ filled / sketch)
m_DisplayPcbTrackFill = true; // false = sketch , true = filled
m_Draw3DFrame = NULL; // Display Window in 3D mode (OpenGL)
m_UserGridSize = wxRealPoint( 100.0, 100.0 );
......@@ -381,6 +373,7 @@ void PCB_BASE_FRAME::Show3D_Frame( wxCommandEvent& event )
void PCB_BASE_FRAME::SwitchLayer( wxDC* DC, LAYER_ID layer )
{
LAYER_ID preslayer = ((PCB_SCREEN*)GetScreen())->m_Active_Layer;
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
// Check if the specified layer matches the present layer
if( layer == preslayer )
......@@ -422,22 +415,27 @@ void PCB_BASE_FRAME::SwitchLayer( wxDC* DC, LAYER_ID layer )
GetScreen()->m_Active_Layer = layer;
if( DisplayOpt.ContrastModeDisplay )
if( displ_opts->m_ContrastModeDisplay )
m_canvas->Refresh();
}
void PCB_BASE_FRAME::OnTogglePolarCoords( wxCommandEvent& aEvent )
{
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
SetStatusText( wxEmptyString );
DisplayOpt.DisplayPolarCood = !DisplayOpt.DisplayPolarCood;
displ_opts->m_DisplayPolarCood = !displ_opts->m_DisplayPolarCood;
UpdateStatusBar();
}
void PCB_BASE_FRAME::OnTogglePadDrawMode( wxCommandEvent& aEvent )
{
m_DisplayPadFill = DisplayOpt.DisplayPadFill = !m_DisplayPadFill;
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
displ_opts->m_DisplayPadFill = !displ_opts->m_DisplayPadFill;
EDA_DRAW_PANEL_GAL* gal = GetGalCanvas();
if( gal )
......@@ -447,7 +445,7 @@ void PCB_BASE_FRAME::OnTogglePadDrawMode( wxCommandEvent& aEvent )
static_cast<KIGFX::PCB_PAINTER*> ( gal->GetView()->GetPainter() );
KIGFX::PCB_RENDER_SETTINGS* settings =
static_cast<KIGFX::PCB_RENDER_SETTINGS*> ( painter->GetSettings() );
settings->LoadDisplayOptions( DisplayOpt );
settings->LoadDisplayOptions( displ_opts );
// Update pads
BOARD* board = GetBoard();
......@@ -464,9 +462,11 @@ void PCB_BASE_FRAME::OnTogglePadDrawMode( wxCommandEvent& aEvent )
void PCB_BASE_FRAME::OnUpdateCoordType( wxUpdateUIEvent& aEvent )
{
aEvent.Check( DisplayOpt.DisplayPolarCood );
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
aEvent.Check( displ_opts->m_DisplayPolarCood );
m_optionsToolBar->SetToolShortHelp( ID_TB_OPTIONS_SHOW_POLAR_COORD,
DisplayOpt.DisplayPolarCood ?
displ_opts->m_DisplayPolarCood ?
_( "Display rectangular coordinates" ) :
_( "Display polar coordinates" ) );
}
......@@ -474,9 +474,10 @@ void PCB_BASE_FRAME::OnUpdateCoordType( wxUpdateUIEvent& aEvent )
void PCB_BASE_FRAME::OnUpdatePadDrawMode( wxUpdateUIEvent& aEvent )
{
aEvent.Check( !m_DisplayPadFill );
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
aEvent.Check( !displ_opts->m_DisplayPadFill );
m_optionsToolBar->SetToolShortHelp( ID_TB_OPTIONS_SHOW_PADS_SKETCH,
m_DisplayPadFill ?
displ_opts->m_DisplayPadFill ?
_( "Show pads in outline mode" ) :
_( "Show pads in fill mode" ) );
}
......@@ -615,16 +616,18 @@ void PCB_BASE_FRAME::SetToolID( int aId, int aCursor, const wxString& aToolMsg )
if( aId < 0 )
return;
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
// handle color changes for transitions in and out of ID_TRACK_BUTT
if( ( GetToolId() == ID_TRACK_BUTT && aId != ID_TRACK_BUTT )
|| ( GetToolId() != ID_TRACK_BUTT && aId == ID_TRACK_BUTT ) )
{
if( DisplayOpt.ContrastModeDisplay )
if( displ_opts->m_ContrastModeDisplay )
redraw = true;
}
// must do this after the tool has been set, otherwise pad::Draw() does
// not show proper color when DisplayOpt.ContrastModeDisplay is true.
// not show proper color when GetDisplayOptions().ContrastModeDisplay is true.
if( redraw && m_canvas )
m_canvas->Refresh();
}
......@@ -646,10 +649,11 @@ void PCB_BASE_FRAME::UpdateStatusBar()
double dYpos;
wxString line;
wxString locformatter;
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
EDA_DRAW_FRAME::UpdateStatusBar();
if( DisplayOpt.DisplayPolarCood ) // display polar coordinates
if( displ_opts->m_DisplayPolarCood ) // display polar coordinates
{
double theta, ro;
......@@ -708,7 +712,7 @@ void PCB_BASE_FRAME::UpdateStatusBar()
line.Printf( absformatter, dXpos, dYpos );
SetStatusText( line, 2 );
if( !DisplayOpt.DisplayPolarCood ) // display relative cartesian coordinates
if( !displ_opts->m_DisplayPolarCood ) // display relative cartesian coordinates
{
// Display relative coordinates:
dx = GetCrossHairPosition().x - screen->m_O_Curseur.x;
......@@ -746,23 +750,23 @@ void PCB_BASE_FRAME::LoadSettings( wxConfigBase* aCfg )
long itmp;
aCfg->Read( m_FrameName + UserGridUnitsEntry, &itmp, ( long )INCHES );
m_UserGridUnit = (EDA_UNITS_T) itmp;
aCfg->Read( m_FrameName + DisplayPadFillEntry, &m_DisplayPadFill, true );
aCfg->Read( m_FrameName + DisplayViaFillEntry, &m_DisplayViaFill, true );
aCfg->Read( m_FrameName + DisplayPadNumberEntry, &m_DisplayPadNum, true );
aCfg->Read( m_FrameName + DisplayModuleEdgeEntry, &m_DisplayModEdge, ( long )FILLED );
aCfg->Read( m_FrameName + DisplayPadFillEntry, &m_DisplayOptions.m_DisplayPadFill, true );
aCfg->Read( m_FrameName + DisplayViaFillEntry, &m_DisplayOptions.m_DisplayViaFill, true );
aCfg->Read( m_FrameName + DisplayPadNumberEntry, &m_DisplayOptions.m_DisplayPadNum, true );
aCfg->Read( m_FrameName + DisplayModuleEdgeEntry, &m_DisplayOptions.m_DisplayModEdge, ( long )FILLED );
aCfg->Read( m_FrameName + FastGrid1Entry, &itmp, ( long )0);
m_FastGrid1 = itmp;
aCfg->Read( m_FrameName + FastGrid2Entry, &itmp, ( long )0);
m_FastGrid2 = itmp;
if( m_DisplayModEdge < LINE || m_DisplayModEdge > SKETCH )
m_DisplayModEdge = FILLED;
if( m_DisplayOptions.m_DisplayModEdge < LINE || m_DisplayOptions.m_DisplayModEdge > SKETCH )
m_DisplayOptions.m_DisplayModEdge = FILLED;
aCfg->Read( m_FrameName + DisplayModuleTextEntry, &m_DisplayModText, ( long )FILLED );
aCfg->Read( m_FrameName + DisplayModuleTextEntry, &m_DisplayOptions.m_DisplayModText, ( long )FILLED );
if( m_DisplayModText < LINE || m_DisplayModText > SKETCH )
m_DisplayModText = FILLED;
if( m_DisplayOptions.m_DisplayModText < LINE || m_DisplayOptions.m_DisplayModText > SKETCH )
m_DisplayOptions.m_DisplayModText = FILLED;
// WxWidgets 2.9.1 seems call setlocale( LC_NUMERIC, "" )
// when reading doubles in config,
......@@ -778,11 +782,11 @@ void PCB_BASE_FRAME::SaveSettings( wxConfigBase* aCfg )
aCfg->Write( m_FrameName + UserGridSizeXEntry, m_UserGridSize.x );
aCfg->Write( m_FrameName + UserGridSizeYEntry, m_UserGridSize.y );
aCfg->Write( m_FrameName + UserGridUnitsEntry, ( long )m_UserGridUnit );
aCfg->Write( m_FrameName + DisplayPadFillEntry, m_DisplayPadFill );
aCfg->Write( m_FrameName + DisplayViaFillEntry, m_DisplayViaFill );
aCfg->Write( m_FrameName + DisplayPadNumberEntry, m_DisplayPadNum );
aCfg->Write( m_FrameName + DisplayModuleEdgeEntry, ( long )m_DisplayModEdge );
aCfg->Write( m_FrameName + DisplayModuleTextEntry, ( long )m_DisplayModText );
aCfg->Write( m_FrameName + DisplayPadFillEntry, m_DisplayOptions.m_DisplayPadFill );
aCfg->Write( m_FrameName + DisplayViaFillEntry, m_DisplayOptions.m_DisplayViaFill );
aCfg->Write( m_FrameName + DisplayPadNumberEntry, m_DisplayOptions.m_DisplayPadNum );
aCfg->Write( m_FrameName + DisplayModuleEdgeEntry, ( long )m_DisplayOptions.m_DisplayModEdge );
aCfg->Write( m_FrameName + DisplayModuleTextEntry, ( long )m_DisplayOptions.m_DisplayModText );
aCfg->Write( m_FrameName + FastGrid1Entry, ( long )m_FastGrid1 );
aCfg->Write( m_FrameName + FastGrid2Entry, ( long )m_FastGrid2 );
}
......
pcbnew/block.cpp
View file @ 9cfb97d8
......@@ -565,8 +565,9 @@ static void drawMovingBlock( EDA_DRAW_PANEL* aPanel, wxDC* aDC, const wxPoint& a
BASE_SCREEN* screen = aPanel->GetScreen();
// do not show local module rastnest in block move, it is not usable.
bool tmp = g_Show_Module_Ratsnest;
g_Show_Module_Ratsnest = false;
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)aPanel->GetDisplayOptions();
bool showRats = displ_opts->m_Show_Module_Ratsnest;
displ_opts->m_Show_Module_Ratsnest = false;
if( aErase )
{
......@@ -596,7 +597,7 @@ static void drawMovingBlock( EDA_DRAW_PANEL* aPanel, wxDC* aDC, const wxPoint& a
drawPickedItems( aPanel, aDC, screen->m_BlockLocate.GetMoveVector() );
}
g_Show_Module_Ratsnest = tmp;
displ_opts->m_Show_Module_Ratsnest = showRats;
}
......
pcbnew/class_dimension.cpp
View file @ 9cfb97d8
......@@ -346,7 +346,8 @@ void DIMENSION::Draw( EDA_DRAW_PANEL* panel, wxDC* DC, GR_DRAWMODE mode_color,
gcolor = brd->GetLayerColor( m_Layer );
GRSetDrawMode( DC, mode_color );
typeaff = DisplayOpt.DisplayDrawItems;
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)panel->GetDisplayOptions();
typeaff = displ_opts ? displ_opts->m_DisplayDrawItems : FILLED;
width = m_Width;
if( DC->LogicalToDeviceXRel( width ) <= MIN_DRAW_WIDTH )
......
pcbnew/class_drawsegment.cpp
View file @ 9cfb97d8
......@@ -183,7 +183,9 @@ void DRAWSEGMENT::Draw( EDA_DRAW_PANEL* panel, wxDC* DC, GR_DRAWMODE draw_mode,
color = brd->GetLayerColor( GetLayer() );
if( ( draw_mode & GR_ALLOW_HIGHCONTRAST ) && DisplayOpt.ContrastModeDisplay )
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)panel->GetDisplayOptions();
if( ( draw_mode & GR_ALLOW_HIGHCONTRAST ) && displ_opts && displ_opts->m_ContrastModeDisplay )
{
if( !IsOnLayer( curr_layer ) && !IsOnLayer( Edge_Cuts ) )
ColorTurnToDarkDarkGray( &color );
......@@ -200,7 +202,7 @@ void DRAWSEGMENT::Draw( EDA_DRAW_PANEL* panel, wxDC* DC, GR_DRAWMODE draw_mode,
dx = m_End.x + aOffset.x;
dy = m_End.y + aOffset.y;
mode = DisplayOpt.DisplayDrawItems;
mode = displ_opts ? displ_opts->m_DisplayDrawItems : FILLED;
if( m_Flags & FORCE_SKETCH )
mode = SKETCH;
......
pcbnew/class_edge_mod.cpp
View file @ 9cfb97d8
......@@ -144,15 +144,14 @@ void EDGE_MODULE::Draw( EDA_DRAW_PANEL* panel, wxDC* DC, GR_DRAWMODE draw_mode,
return;
EDA_COLOR_T color = brd->GetLayerColor( m_Layer );
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)panel->GetDisplayOptions();
if(( draw_mode & GR_ALLOW_HIGHCONTRAST ) && DisplayOpt.ContrastModeDisplay )
if(( draw_mode & GR_ALLOW_HIGHCONTRAST ) && displ_opts && displ_opts->m_ContrastModeDisplay )
{
if( !IsOnLayer( curr_layer ) )
ColorTurnToDarkDarkGray( &color );
}
PCB_BASE_FRAME* frame = (PCB_BASE_FRAME*) panel->GetParent();
ux0 = m_Start.x - offset.x;
uy0 = m_Start.y - offset.y;
......@@ -160,11 +159,11 @@ void EDGE_MODULE::Draw( EDA_DRAW_PANEL* panel, wxDC* DC, GR_DRAWMODE draw_mode,
dy = m_End.y - offset.y;
GRSetDrawMode( DC, draw_mode );
typeaff = frame->m_DisplayModEdge;
typeaff = displ_opts ? displ_opts->m_DisplayModEdge : FILLED;
if( IsCopperLayer( m_Layer ) )
{
typeaff = frame->m_DisplayPcbTrackFill;
typeaff = displ_opts ? displ_opts->m_DisplayPcbTrackFill : FILLED;
if( !typeaff )
typeaff = SKETCH;
......
pcbnew/class_mire.cpp
View file @ 9cfb97d8
......@@ -102,7 +102,8 @@ void PCB_TARGET::Draw( EDA_DRAW_PANEL* panel, wxDC* DC, GR_DRAWMODE mode_color,
EDA_COLOR_T gcolor = brd->GetLayerColor( m_Layer );
GRSetDrawMode( DC, mode_color );
typeaff = DisplayOpt.DisplayDrawItems;
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)panel->GetDisplayOptions();
typeaff = displ_opts ? displ_opts->m_DisplayDrawItems : FILLED;
width = m_Width;
if( DC->LogicalToDeviceXRel( width ) <= MIN_DRAW_WIDTH )
......
pcbnew/class_pad_draw_functions.cpp
View file @ 9cfb97d8
......@@ -117,9 +117,10 @@ void D_PAD::Draw( EDA_DRAW_PANEL* aPanel, wxDC* aDC, GR_DRAWMODE aDraw_mode,
return;
PCB_BASE_FRAME* frame = (PCB_BASE_FRAME*) aPanel->GetParent();
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)frame->GetDisplayOptions();
PCB_SCREEN* screen = frame->GetScreen();
if( frame->m_DisplayPadFill == FILLED )
if( displ_opts->m_DisplayPadFill == FILLED )
drawInfo.m_ShowPadFilled = true;
else
drawInfo.m_ShowPadFilled = false;
......@@ -165,7 +166,7 @@ void D_PAD::Draw( EDA_DRAW_PANEL* aPanel, wxDC* aDC, GR_DRAWMODE aDraw_mode,
// if SMD or connector pad and high contrast mode
if( ( aDraw_mode & GR_ALLOW_HIGHCONTRAST ) &&
( GetAttribute() == PAD_SMD || GetAttribute() == PAD_CONN ) &&
DisplayOpt.ContrastModeDisplay )
displ_opts && displ_opts->m_ContrastModeDisplay )
{
// when routing tracks
if( frame && frame->GetToolId() == ID_TRACK_BUTT )
......@@ -229,7 +230,7 @@ void D_PAD::Draw( EDA_DRAW_PANEL* aPanel, wxDC* aDC, GR_DRAWMODE aDraw_mode,
// layer so we can see pads on paste or solder layer and the size of the
// mask
if( ( aDraw_mode & GR_ALLOW_HIGHCONTRAST ) &&
DisplayOpt.ContrastModeDisplay && !IsCopperLayer( screen->m_Active_Layer ) )
displ_opts && displ_opts->m_ContrastModeDisplay && !IsCopperLayer( screen->m_Active_Layer ) )
{
if( IsOnLayer( screen->m_Active_Layer ) )
{
......@@ -263,7 +264,7 @@ void D_PAD::Draw( EDA_DRAW_PANEL* aPanel, wxDC* aDC, GR_DRAWMODE aDraw_mode,
ColorApplyHighlightFlag( &color );
bool DisplayIsol = DisplayOpt.DisplayPadIsol;
bool DisplayIsol = displ_opts && displ_opts->m_DisplayPadIsol;
if( !( m_layerMask & LSET::AllCuMask() ).any() )
DisplayIsol = false;
......@@ -284,23 +285,24 @@ void D_PAD::Draw( EDA_DRAW_PANEL* aPanel, wxDC* aDC, GR_DRAWMODE aDraw_mode,
SetAlpha( &color, 170 );
/* Get the pad clearance. This has a meaning only for Pcbnew.
* for CvPcb (and GerbView) GetClearance() creates debug errors because
* for CvPcb GetClearance() creates debug errors because
* there is no net classes so a call to GetClearance() is made only when
* needed (never needed in CvPcb nor in GerbView)
* needed (never needed in CvPcb)
*/
drawInfo.m_PadClearance = DisplayIsol ? GetClearance() : 0;
// Draw the pad number
if( frame && !frame->m_DisplayPadNum )
if( displ_opts && !displ_opts->m_DisplayPadNum )
drawInfo.m_Display_padnum = false;
if( ( DisplayOpt.DisplayNetNamesMode == 0 ) || ( DisplayOpt.DisplayNetNamesMode == 2 ) )
if( displ_opts &&
(( displ_opts ->m_DisplayNetNamesMode == 0 ) || ( displ_opts->m_DisplayNetNamesMode == 2 )) )
drawInfo.m_Display_netname = false;
// Display net names is restricted to pads that are on the active layer
// in high contrast mode display
if( ( aDraw_mode & GR_ALLOW_HIGHCONTRAST ) &&
!IsOnLayer( screen->m_Active_Layer ) && DisplayOpt.ContrastModeDisplay )
!IsOnLayer( screen->m_Active_Layer ) && displ_opts && displ_opts->m_ContrastModeDisplay )
drawInfo.m_Display_netname = false;
DrawShape( aPanel->GetClipBox(), aDC, drawInfo );
......
pcbnew/class_pcb_layer_widget.cpp
View file @ 9cfb97d8
......@@ -431,10 +431,11 @@ bool PCB_LAYER_WIDGET::OnLayerSelect( int aLayer )
return false;
myframe->SetActiveLayer( layer );
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)myframe->GetDisplayOptions();
if( m_alwaysShowActiveCopperLayer )
OnLayerSelected();
else if( DisplayOpt.ContrastModeDisplay )
else if( displ_opts->m_ContrastModeDisplay )
myframe->GetCanvas()->Refresh();
return true;
......
pcbnew/class_pcb_text.cpp
View file @ 9cfb97d8
......@@ -91,8 +91,9 @@ void TEXTE_PCB::Draw( EDA_DRAW_PANEL* panel, wxDC* DC,
EDA_COLOR_T color = brd->GetLayerColor( m_Layer );
EDA_DRAW_MODE_T fillmode = FILLED;
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)panel->GetDisplayOptions();
if( DisplayOpt.DisplayDrawItems == SKETCH )
if( displ_opts && displ_opts->m_DisplayDrawItems == SKETCH )
fillmode = SKETCH;
EDA_COLOR_T anchor_color = UNSPECIFIED_COLOR;
......
pcbnew/class_text_mod.cpp
View file @ 9cfb97d8
......@@ -287,12 +287,12 @@ void TEXTE_MODULE::Draw( EDA_DRAW_PANEL* panel, wxDC* DC, GR_DRAWMODE draw_mode,
}
// Draw mode compensation for the width
PCB_BASE_FRAME* frame = static_cast<PCB_BASE_FRAME*>( panel->GetParent() );
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)panel->GetDisplayOptions();
int width = m_Thickness;
if( ( frame->m_DisplayModText == LINE )
if( ( displ_opts && displ_opts->m_DisplayModText == LINE )
|| ( DC->LogicalToDeviceXRel( width ) <= MIN_DRAW_WIDTH ) )
width = 0;
else if( frame->m_DisplayModText == SKETCH )
else if( displ_opts && displ_opts->m_DisplayModText == SKETCH )
width = -width;
GRSetDrawMode( DC, draw_mode );
......
pcbnew/class_track.cpp
View file @ 9cfb97d8
......@@ -52,14 +52,14 @@
* tests to see if the clearance border is drawn on the given track.
* @return bool - true if should draw clearance, else false.
*/
static bool ShowClearance( const TRACK* aTrack )
static bool ShowClearance( DISPLAY_OPTIONS* aDisplOpts, const TRACK* aTrack )
{
// maybe return true for tracks and vias, not for zone segments
return IsCopperLayer( aTrack->GetLayer() )
&& ( aTrack->Type() == PCB_TRACE_T || aTrack->Type() == PCB_VIA_T )
&& ( ( DisplayOpt.ShowTrackClearanceMode == SHOW_CLEARANCE_NEW_AND_EDITED_TRACKS_AND_VIA_AREAS
&& ( ( aDisplOpts->m_ShowTrackClearanceMode == SHOW_CLEARANCE_NEW_AND_EDITED_TRACKS_AND_VIA_AREAS
&& ( aTrack->IsDragging() || aTrack->IsMoving() || aTrack->IsNew() ) )
|| ( DisplayOpt.ShowTrackClearanceMode == SHOW_CLEARANCE_ALWAYS )
|| ( aDisplOpts->m_ShowTrackClearanceMode == SHOW_CLEARANCE_ALWAYS )
);
}
......@@ -312,11 +312,8 @@ const EDA_RECT TRACK::GetBoundingBox() const
xmin = std::min( m_Start.x, m_End.x );
}
if( ShowClearance( this ) )
{
// + 1 is for the clearance line itself.
radius += GetClearance() + 1;
}
ymax += radius;
xmax += radius;
......@@ -538,7 +535,9 @@ void TRACK::DrawShortNetname( EDA_DRAW_PANEL* panel,
* - only tracks with a length > 10 * thickness are eligible
* and, of course, if we are not printing the board
*/
if( DisplayOpt.DisplayNetNamesMode == 0 || DisplayOpt.DisplayNetNamesMode == 1 )
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)panel->GetDisplayOptions();
if( displ_opts->m_DisplayNetNamesMode == 0 || displ_opts->m_DisplayNetNamesMode == 1 )
return;
#define THRESHOLD 10
......@@ -596,7 +595,7 @@ void TRACK::DrawShortNetname( EDA_DRAW_PANEL* panel,
LAYER_ID curr_layer = ( (PCB_SCREEN*) panel->GetScreen() )->m_Active_Layer;
if( ( aDC->LogicalToDeviceXRel( tsize ) >= MIN_TEXT_SIZE )
&& ( !(!IsOnLayer( curr_layer )&& DisplayOpt.ContrastModeDisplay) ) )
&& ( !(!IsOnLayer( curr_layer )&& displ_opts->m_ContrastModeDisplay) ) )
{
if( (aDrawMode & GR_XOR) == 0 )
GRSetDrawMode( aDC, GR_COPY );
......@@ -629,7 +628,9 @@ void TRACK::Draw( EDA_DRAW_PANEL* panel, wxDC* aDC, GR_DRAWMODE aDrawMode,
return;
#endif
if( ( aDrawMode & GR_ALLOW_HIGHCONTRAST ) && DisplayOpt.ContrastModeDisplay )
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*) panel->GetDisplayOptions();
if( ( aDrawMode & GR_ALLOW_HIGHCONTRAST ) && displ_opts->m_ContrastModeDisplay )
{
LAYER_ID curr_layer = ( (PCB_SCREEN*) panel->GetScreen() )->m_Active_Layer;
......@@ -654,7 +655,7 @@ void TRACK::Draw( EDA_DRAW_PANEL* panel, wxDC* aDC, GR_DRAWMODE aDrawMode,
return;
}
if( !DisplayOpt.DisplayPcbTrackFill || GetState( FORCE_SKETCH ) )
if( !displ_opts->m_DisplayPcbTrackFill || GetState( FORCE_SKETCH ) )
{
GRCSegm( panel->GetClipBox(), aDC, m_Start + aOffset, m_End + aOffset, m_Width, color );
}
......@@ -669,7 +670,7 @@ void TRACK::Draw( EDA_DRAW_PANEL* panel, wxDC* aDC, GR_DRAWMODE aDrawMode,
return;
// Show clearance for tracks, not for zone segments
if( ShowClearance( this ) )
if( ShowClearance( displ_opts, this ) )
{
GRCSegm( panel->GetClipBox(), aDC, m_Start + aOffset, m_End + aOffset,
m_Width + (GetClearance() * 2), color );
......@@ -682,7 +683,9 @@ void TRACK::Draw( EDA_DRAW_PANEL* panel, wxDC* aDC, GR_DRAWMODE aDrawMode,
void SEGZONE::Draw( EDA_DRAW_PANEL* panel, wxDC* aDC, GR_DRAWMODE aDrawMode,
const wxPoint& aOffset )
{
if( DisplayOpt.DisplayZonesMode != 0 )
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)panel->GetDisplayOptions();
if( displ_opts->m_DisplayZonesMode != 0 )
return;
BOARD * brd = GetBoard( );
......@@ -697,7 +700,7 @@ void SEGZONE::Draw( EDA_DRAW_PANEL* panel, wxDC* aDC, GR_DRAWMODE aDrawMode,
return;
#endif
if( ( aDrawMode & GR_ALLOW_HIGHCONTRAST ) && DisplayOpt.ContrastModeDisplay )
if( ( aDrawMode & GR_ALLOW_HIGHCONTRAST ) && displ_opts->m_ContrastModeDisplay )
{
LAYER_ID curr_layer = ( (PCB_SCREEN*) panel->GetScreen() )->m_Active_Layer;
......@@ -722,7 +725,7 @@ void SEGZONE::Draw( EDA_DRAW_PANEL* panel, wxDC* aDC, GR_DRAWMODE aDrawMode,
return;
}
if( !DisplayOpt.DisplayPcbTrackFill || GetState( FORCE_SKETCH ) )
if( !displ_opts->m_DisplayPcbTrackFill || GetState( FORCE_SKETCH ) )
{
GRCSegm( panel->GetClipBox(), aDC, m_Start + aOffset, m_End + aOffset, m_Width, color );
}
......@@ -768,8 +771,9 @@ void VIA::Draw( EDA_DRAW_PANEL* panel, wxDC* aDC, GR_DRAWMODE aDrawMode,
int fillvia = 0;
PCB_BASE_FRAME* frame = (PCB_BASE_FRAME*) panel->GetParent();
PCB_SCREEN* screen = frame->GetScreen();
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)frame->GetDisplayOptions();
if( frame->m_DisplayViaFill == FILLED )
if( displ_opts->m_DisplayViaFill == FILLED )
fillvia = 1;
GRSetDrawMode( aDC, aDrawMode );
......@@ -785,7 +789,7 @@ void VIA::Draw( EDA_DRAW_PANEL* panel, wxDC* aDC, GR_DRAWMODE aDrawMode,
if( !( brd->GetVisibleLayers() & GetLayerSet() ).any() )
return;
if( DisplayOpt.ContrastModeDisplay )
if( displ_opts->m_ContrastModeDisplay )
{
if( !IsOnLayer( curr_layer ) )
ColorTurnToDarkDarkGray( &color );
......@@ -832,10 +836,10 @@ void VIA::Draw( EDA_DRAW_PANEL* panel, wxDC* aDC, GR_DRAWMODE aDrawMode,
}
// Draw the via hole if the display option allows it
if( DisplayOpt.m_DisplayViaMode != VIA_HOLE_NOT_SHOW )
if( displ_opts->m_DisplayViaMode != VIA_HOLE_NOT_SHOW )
{
// Display all drill holes requested or Display non default holes requested
if( (DisplayOpt.m_DisplayViaMode == ALL_VIA_HOLE_SHOW)
if( (displ_opts->m_DisplayViaMode == ALL_VIA_HOLE_SHOW)
|| ( (drill_radius > 0 ) && !IsDrillDefault() ) )
{
if( fillvia )
......@@ -871,7 +875,7 @@ void VIA::Draw( EDA_DRAW_PANEL* panel, wxDC* aDC, GR_DRAWMODE aDrawMode,
}
}
if( ShowClearance( this ) )
if( ShowClearance( displ_opts, this ) )
{
GRCircle( panel->GetClipBox(), aDC, m_Start + aOffset, radius + GetClearance(), 0, color );
}
......@@ -945,7 +949,7 @@ void VIA::Draw( EDA_DRAW_PANEL* panel, wxDC* aDC, GR_DRAWMODE aDrawMode,
if( GetNetCode() == NETINFO_LIST::UNCONNECTED )
return;
if( DisplayOpt.DisplayNetNamesMode == 0 || DisplayOpt.DisplayNetNamesMode == 1 )
if( displ_opts->m_DisplayNetNamesMode == 0 || displ_opts->m_DisplayNetNamesMode == 1 )
return;
NETINFO_ITEM* net = GetNet();
......
pcbnew/class_zone.cpp
View file @ 9cfb97d8
......@@ -155,8 +155,9 @@ void ZONE_CONTAINER::Draw( EDA_DRAW_PANEL* panel, wxDC* DC, GR_DRAWMODE aDrawMod
return;
GRSetDrawMode( DC, aDrawMode );
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)panel->GetDisplayOptions();
if( DisplayOpt.ContrastModeDisplay )
if( displ_opts->m_ContrastModeDisplay )
{
if( !IsOnLayer( curr_layer ) )
ColorTurnToDarkDarkGray( &color );
......@@ -215,15 +216,16 @@ void ZONE_CONTAINER::DrawFilledArea( EDA_DRAW_PANEL* panel,
{
static std::vector <char> CornersTypeBuffer;
static std::vector <wxPoint> CornersBuffer;
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)panel->GetDisplayOptions();
// outline_mode is false to show filled polys,
// and true to show polygons outlines only (test and debug purposes)
bool outline_mode = DisplayOpt.DisplayZonesMode == 2 ? true : false;
bool outline_mode = displ_opts->m_DisplayZonesMode == 2 ? true : false;
if( DC == NULL )
return;
if( DisplayOpt.DisplayZonesMode == 1 ) // Do not show filled areas
if( displ_opts->m_DisplayZonesMode == 1 ) // Do not show filled areas
return;
if( m_FilledPolysList.GetCornersCount() == 0 ) // Nothing to draw
......@@ -238,7 +240,7 @@ void ZONE_CONTAINER::DrawFilledArea( EDA_DRAW_PANEL* panel,
GRSetDrawMode( DC, aDrawMode );
if( DisplayOpt.ContrastModeDisplay )
if( displ_opts->m_ContrastModeDisplay )
{
if( !IsOnLayer( curr_layer ) )
ColorTurnToDarkDarkGray( &color );
......@@ -293,7 +295,7 @@ void ZONE_CONTAINER::DrawFilledArea( EDA_DRAW_PANEL* panel,
// Draw only basic outlines, not extra segments.
if( CornersTypeBuffer[ie] == 0 )
{
if( !DisplayOpt.DisplayPcbTrackFill || GetState( FORCE_SKETCH ) )
if( !displ_opts->m_DisplayPcbTrackFill || GetState( FORCE_SKETCH ) )
GRCSegm( panel->GetClipBox(), DC,
x0, y0, x1, y1,
m_ZoneMinThickness, color );
......@@ -323,7 +325,7 @@ void ZONE_CONTAINER::DrawFilledArea( EDA_DRAW_PANEL* panel,
wxPoint start = m_FillSegmList[ic].m_Start + offset;
wxPoint end = m_FillSegmList[ic].m_End + offset;
if( !DisplayOpt.DisplayPcbTrackFill || GetState( FORCE_SKETCH ) )
if( !displ_opts->m_DisplayPcbTrackFill || GetState( FORCE_SKETCH ) )
GRCSegm( panel->GetClipBox(), DC, start.x, start.y, end.x, end.y,
m_ZoneMinThickness, color );
else
......@@ -374,8 +376,9 @@ void ZONE_CONTAINER::DrawWhileCreateOutline( EDA_DRAW_PANEL* panel, wxDC* DC,
LAYER_ID curr_layer = ( (PCB_SCREEN*) panel->GetScreen() )->m_Active_Layer;
BOARD* brd = GetBoard();
EDA_COLOR_T color = brd->GetLayerColor( m_Layer );
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)panel->GetDisplayOptions();
if( DisplayOpt.ContrastModeDisplay )
if( displ_opts->m_ContrastModeDisplay )
{
if( !IsOnLayer( curr_layer ) )
ColorTurnToDarkDarkGray( &color );
......
pcbnew/classpcb.cpp
View file @ 9cfb97d8
......@@ -202,26 +202,28 @@ int PCB_SCREEN::MilsToIuScalar()
DISPLAY_OPTIONS::DISPLAY_OPTIONS()
{
DisplayPadFill = FILLED;
DisplayViaFill = FILLED;
DisplayPadNum = true;
DisplayPadIsol = true;
DisplayModEdge = true;
DisplayModText = true;
DisplayPcbTrackFill = true; // false = sketch , true = filled
ShowTrackClearanceMode = SHOW_CLEARANCE_NEW_TRACKS_AND_VIA_AREAS;
m_DisplayPadFill = FILLED;
m_DisplayViaFill = FILLED;
m_DisplayPadNum = true;
m_DisplayPadIsol = true;
m_DisplayModEdge = true;
m_DisplayModText = true;
m_DisplayPcbTrackFill = true; // false = sketch , true = filled
m_ShowTrackClearanceMode = SHOW_CLEARANCE_NEW_TRACKS_AND_VIA_AREAS;
m_DisplayViaMode = VIA_HOLE_NOT_SHOW;
DisplayPolarCood = false; /* false = display absolute coordinates,
m_DisplayPolarCood = false; /* false = display absolute coordinates,
* true = display polar cordinates */
DisplayZonesMode = 0; /* 0 = Show filled areas outlines in zones,
m_DisplayZonesMode = 0; /* 0 = Show filled areas outlines in zones,
* 1 = do not show filled areas outlines
* 2 = show outlines of filled areas */
DisplayNetNamesMode = 3; /* 0 do not show netnames,
m_DisplayNetNamesMode = 3; /* 0 do not show netnames,
* 1 show netnames on pads
* 2 show netnames on tracks
* 3 show netnames on tracks and pads */
DisplayDrawItems = true;
ContrastModeDisplay = false;
m_DisplayDrawItems = true;
m_ContrastModeDisplay = false;
m_MaxLinksShowed = 3; // in track creation: number of hairwires shown
m_Show_Module_Ratsnest = true; // When moving a footprint: allows displaying a ratsnest
}
pcbnew/controle.cpp
View file @ 9cfb97d8
......@@ -104,6 +104,7 @@ BOARD_ITEM* PCB_BASE_FRAME::PcbGeneralLocateAndDisplay( int aHotKeyCode )
BOARD_ITEM* item;
GENERAL_COLLECTORS_GUIDE guide = GetCollectorsGuide();
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
// Assign to scanList the proper item types desired based on tool type
// or hotkey that is in play.
......@@ -120,7 +121,7 @@ BOARD_ITEM* PCB_BASE_FRAME::PcbGeneralLocateAndDisplay( int aHotKeyCode )
if( m_mainToolBar->GetToolToggled( ID_TOOLBARH_PCB_MODE_MODULE ) )
scanList = GENERAL_COLLECTOR::Modules;
else
scanList = (DisplayOpt.DisplayZonesMode == 0) ?
scanList = (displ_opts->m_DisplayZonesMode == 0) ?
GENERAL_COLLECTOR::AllBoardItems :
GENERAL_COLLECTOR::AllButZones;
}
......@@ -146,7 +147,7 @@ BOARD_ITEM* PCB_BASE_FRAME::PcbGeneralLocateAndDisplay( int aHotKeyCode )
break;
default:
scanList = DisplayOpt.DisplayZonesMode == 0 ?
scanList = displ_opts->m_DisplayZonesMode == 0 ?
GENERAL_COLLECTOR::AllBoardItems :
GENERAL_COLLECTOR::AllButZones;
}
......
pcbnew/dialogs/dialog_display_options.cpp
View file @ 9cfb97d8
......@@ -68,13 +68,14 @@ DIALOG_DISPLAY_OPTIONS::DIALOG_DISPLAY_OPTIONS( PCB_EDIT_FRAME* parent ) :
void DIALOG_DISPLAY_OPTIONS::init()
{
SetFocus();
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)m_Parent->GetDisplayOptions();
if ( DisplayOpt.DisplayPcbTrackFill )
if ( displ_opts->m_DisplayPcbTrackFill )
m_OptDisplayTracks->SetSelection( 1 );
else
m_OptDisplayTracks->SetSelection( 0 );
switch ( DisplayOpt.ShowTrackClearanceMode )
switch ( displ_opts->m_ShowTrackClearanceMode )
{
case DO_NOT_SHOW_CLEARANCE:
m_OptDisplayTracksClearance->SetSelection( 0 );
......@@ -98,26 +99,26 @@ void DIALOG_DISPLAY_OPTIONS::init()
break;
}
if ( DisplayOpt.DisplayPadFill )
if ( displ_opts->m_DisplayPadFill )
m_OptDisplayPads->SetSelection( 1 );
else
m_OptDisplayPads->SetSelection( 0 );
if ( DisplayOpt.DisplayViaFill )
if ( displ_opts->m_DisplayViaFill )
m_OptDisplayVias->SetSelection( 1 );
else
m_OptDisplayVias->SetSelection( 0 );
m_Show_Page_Limits->SetSelection( m_Parent->ShowPageLimits() ? 0 : 1 );
m_OptDisplayViaHole->SetSelection( DisplayOpt.m_DisplayViaMode );
m_OptDisplayModTexts->SetSelection( DisplayOpt.DisplayModText );
m_OptDisplayModEdges->SetSelection( DisplayOpt.DisplayModEdge );
m_OptDisplayPadClearence->SetValue( DisplayOpt.DisplayPadIsol );
m_OptDisplayPadNumber->SetValue( DisplayOpt.DisplayPadNum );
m_OptDisplayViaHole->SetSelection( displ_opts->m_DisplayViaMode );
m_OptDisplayModTexts->SetSelection( displ_opts->m_DisplayModText );
m_OptDisplayModEdges->SetSelection( displ_opts->m_DisplayModEdge );
m_OptDisplayPadClearence->SetValue( displ_opts->m_DisplayPadIsol );
m_OptDisplayPadNumber->SetValue( displ_opts->m_DisplayPadNum );
m_OptDisplayPadNoConn->SetValue( m_Parent->IsElementVisible( PCB_VISIBLE( NO_CONNECTS_VISIBLE ) ) );
m_OptDisplayDrawings->SetSelection( DisplayOpt.DisplayDrawItems );
m_ShowNetNamesOption->SetSelection( DisplayOpt.DisplayNetNamesMode );
m_OptDisplayDrawings->SetSelection( displ_opts->m_DisplayDrawItems );
m_ShowNetNamesOption->SetSelection( displ_opts->m_DisplayNetNamesMode );
}
......@@ -131,74 +132,62 @@ void DIALOG_DISPLAY_OPTIONS::OnCancelClick( wxCommandEvent& event )
*/
void DIALOG_DISPLAY_OPTIONS::OnOkClick(wxCommandEvent& event)
{
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)m_Parent->GetDisplayOptions();
if ( m_Show_Page_Limits->GetSelection() == 0 )
m_Parent->SetShowPageLimits( true );
else
m_Parent->SetShowPageLimits( false );
if ( m_OptDisplayTracks->GetSelection() == 1 )
DisplayOpt.DisplayPcbTrackFill = true;
else
DisplayOpt.DisplayPcbTrackFill = false;
displ_opts->m_DisplayPcbTrackFill = m_OptDisplayTracks->GetSelection() == 1;
m_Parent->m_DisplayPcbTrackFill = DisplayOpt.DisplayPcbTrackFill;
DisplayOpt.m_DisplayViaMode = (VIA_DISPLAY_MODE_T) m_OptDisplayViaHole->GetSelection();
displ_opts->m_DisplayViaMode = (VIA_DISPLAY_MODE_T) m_OptDisplayViaHole->GetSelection();
switch ( m_OptDisplayTracksClearance->GetSelection() )
{
case 0:
DisplayOpt.ShowTrackClearanceMode = DO_NOT_SHOW_CLEARANCE;
displ_opts->m_ShowTrackClearanceMode = DO_NOT_SHOW_CLEARANCE;
break;
case 1:
DisplayOpt.ShowTrackClearanceMode = SHOW_CLEARANCE_NEW_TRACKS;
displ_opts->m_ShowTrackClearanceMode = SHOW_CLEARANCE_NEW_TRACKS;
break;
case 2:
DisplayOpt.ShowTrackClearanceMode = SHOW_CLEARANCE_NEW_TRACKS_AND_VIA_AREAS;
displ_opts->m_ShowTrackClearanceMode = SHOW_CLEARANCE_NEW_TRACKS_AND_VIA_AREAS;
break;
case 3:
DisplayOpt.ShowTrackClearanceMode = SHOW_CLEARANCE_NEW_AND_EDITED_TRACKS_AND_VIA_AREAS;
displ_opts->m_ShowTrackClearanceMode = SHOW_CLEARANCE_NEW_AND_EDITED_TRACKS_AND_VIA_AREAS;
break;
case 4:
DisplayOpt.ShowTrackClearanceMode = SHOW_CLEARANCE_ALWAYS;
displ_opts->m_ShowTrackClearanceMode = SHOW_CLEARANCE_ALWAYS;
break;
}
m_Parent->m_DisplayModText = DisplayOpt.DisplayModText = m_OptDisplayModTexts->GetSelection();
m_Parent->m_DisplayModEdge = DisplayOpt.DisplayModEdge = m_OptDisplayModEdges->GetSelection();
if (m_OptDisplayPads->GetSelection() == 1 )
DisplayOpt.DisplayPadFill = true;
else
DisplayOpt.DisplayPadFill = false;
if (m_OptDisplayVias->GetSelection() == 1 )
DisplayOpt.DisplayViaFill = true;
else
DisplayOpt.DisplayViaFill = false;
displ_opts->m_DisplayModText = m_OptDisplayModTexts->GetSelection();
displ_opts->m_DisplayModEdge = m_OptDisplayModEdges->GetSelection();
m_Parent->m_DisplayPadFill = DisplayOpt.DisplayPadFill;
m_Parent->m_DisplayViaFill = DisplayOpt.DisplayViaFill;
displ_opts->m_DisplayPadFill = m_OptDisplayPads->GetSelection() == 1;
displ_opts->m_DisplayViaFill = m_OptDisplayVias->GetSelection() == 1;
DisplayOpt.DisplayPadIsol = m_OptDisplayPadClearence->GetValue();
displ_opts->m_DisplayPadIsol = m_OptDisplayPadClearence->GetValue();
m_Parent->m_DisplayPadNum = DisplayOpt.DisplayPadNum = m_OptDisplayPadNumber->GetValue();
displ_opts->m_DisplayPadNum = m_OptDisplayPadNumber->GetValue();
m_Parent->SetElementVisibility( PCB_VISIBLE(NO_CONNECTS_VISIBLE),
m_OptDisplayPadNoConn->GetValue() );
DisplayOpt.DisplayDrawItems = m_OptDisplayDrawings->GetSelection();
DisplayOpt.DisplayNetNamesMode = m_ShowNetNamesOption->GetSelection();
displ_opts->m_DisplayDrawItems = m_OptDisplayDrawings->GetSelection();
displ_opts->m_DisplayNetNamesMode = m_ShowNetNamesOption->GetSelection();
// Apply changes to the GAL
KIGFX::VIEW* view = m_Parent->GetGalCanvas()->GetView();
KIGFX::PCB_PAINTER* painter = static_cast<KIGFX::PCB_PAINTER*>( view->GetPainter() );
KIGFX::PCB_RENDER_SETTINGS* settings =
static_cast<KIGFX::PCB_RENDER_SETTINGS*>( painter->GetSettings() );
settings->LoadDisplayOptions( DisplayOpt );
settings->LoadDisplayOptions( displ_opts );
view->RecacheAllItems( true );
m_Parent->GetCanvas()->Refresh();
......
pcbnew/dialogs/dialog_general_options.cpp
View file @ 9cfb97d8
......@@ -63,9 +63,10 @@ void DIALOG_GENERALOPTIONS::init()
m_sdbSizerOK->SetDefault();
m_Board = GetParent()->GetBoard();
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetParent()->GetDisplayOptions();
/* Set display options */
m_PolarDisplay->SetSelection( DisplayOpt.DisplayPolarCood ? 1 : 0 );
m_PolarDisplay->SetSelection( displ_opts->m_DisplayPolarCood ? 1 : 0 );
m_UnitsSelection->SetSelection( g_UserUnit ? 1 : 0 );
m_CursorShape->SetSelection( GetParent()->GetCursorShape() ? 1 : 0 );
......@@ -77,10 +78,10 @@ void DIALOG_GENERALOPTIONS::init()
wxString timevalue;
timevalue << GetParent()->GetAutoSaveInterval() / 60;
m_SaveTime->SetValue( timevalue );
m_MaxShowLinks->SetValue( g_MaxLinksShowed );
m_MaxShowLinks->SetValue( displ_opts->m_MaxLinksShowed );
m_DrcOn->SetValue( g_Drc_On );
m_ShowModuleRatsnest->SetValue( g_Show_Module_Ratsnest );
m_ShowModuleRatsnest->SetValue( displ_opts->m_Show_Module_Ratsnest );
m_ShowGlobalRatsnest->SetValue( m_Board->IsElementVisible( RATSNEST_VISIBLE ) );
m_TrackAutodel->SetValue( g_AutoDeleteOldTrack );
m_Track_45_Only_Ctrl->SetValue( g_Track_45_Only_Allowed );
......@@ -106,8 +107,9 @@ void DIALOG_GENERALOPTIONS::OnCancelClick( wxCommandEvent& event )
void DIALOG_GENERALOPTIONS::OnOkClick( wxCommandEvent& event )
{
EDA_UNITS_T ii;
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetParent()->GetDisplayOptions();
DisplayOpt.DisplayPolarCood = ( m_PolarDisplay->GetSelection() == 0 ) ? false : true;
displ_opts->m_DisplayPolarCood = ( m_PolarDisplay->GetSelection() == 0 ) ? false : true;
ii = g_UserUnit;
g_UserUnit = ( m_UnitsSelection->GetSelection() == 0 ) ? INCHES : MILLIMETRES;
......@@ -119,7 +121,7 @@ void DIALOG_GENERALOPTIONS::OnOkClick( wxCommandEvent& event )
GetParent()->SetRotationAngle( wxRound( 10.0 * wxAtof( m_RotationAngle->GetValue() ) ) );
/* Updating the combobox to display the active layer. */
g_MaxLinksShowed = m_MaxShowLinks->GetValue();
displ_opts->m_MaxLinksShowed = m_MaxShowLinks->GetValue();
g_Drc_On = m_DrcOn->GetValue();
if( m_Board->IsElementVisible(RATSNEST_VISIBLE) != m_ShowGlobalRatsnest->GetValue() )
......@@ -128,7 +130,7 @@ void DIALOG_GENERALOPTIONS::OnOkClick( wxCommandEvent& event )
GetParent()->GetCanvas()->Refresh( );
}
g_Show_Module_Ratsnest = m_ShowModuleRatsnest->GetValue();
displ_opts->m_Show_Module_Ratsnest = m_ShowModuleRatsnest->GetValue();
g_AutoDeleteOldTrack = m_TrackAutodel->GetValue();
g_Segments_45_Only = m_Segments_45_Only_Ctrl->GetValue();
g_Track_45_Only_Allowed = m_Track_45_Only_Ctrl->GetValue();
......@@ -153,6 +155,7 @@ void PCB_EDIT_FRAME::OnSelectOptionToolbar( wxCommandEvent& event )
{
int id = event.GetId();
bool state = event.IsChecked();
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
switch( id )
{
......@@ -178,7 +181,7 @@ void PCB_EDIT_FRAME::OnSelectOptionToolbar( wxCommandEvent& event )
break;
case ID_TB_OPTIONS_SHOW_MODULE_RATSNEST:
g_Show_Module_Ratsnest = state; // TODO: use the visibility list
displ_opts->m_Show_Module_Ratsnest = state; // TODO: see if we can use the visibility list
break;
case ID_TB_OPTIONS_AUTO_DEL_TRACK:
......@@ -186,33 +189,33 @@ void PCB_EDIT_FRAME::OnSelectOptionToolbar( wxCommandEvent& event )
break;
case ID_TB_OPTIONS_SHOW_ZONES:
DisplayOpt.DisplayZonesMode = 0;
displ_opts->m_DisplayZonesMode = 0;
m_canvas->Refresh();
break;
case ID_TB_OPTIONS_SHOW_ZONES_DISABLE:
DisplayOpt.DisplayZonesMode = 1;
displ_opts->m_DisplayZonesMode = 1;
m_canvas->Refresh();
break;
case ID_TB_OPTIONS_SHOW_ZONES_OUTLINES_ONLY:
DisplayOpt.DisplayZonesMode = 2;
displ_opts->m_DisplayZonesMode = 2;
m_canvas->Refresh();
break;
case ID_TB_OPTIONS_SHOW_VIAS_SKETCH:
m_DisplayViaFill = DisplayOpt.DisplayViaFill = !state;
displ_opts->m_DisplayViaFill = !state;
m_canvas->Refresh();
break;
case ID_TB_OPTIONS_SHOW_TRACKS_SKETCH:
m_DisplayPcbTrackFill = DisplayOpt.DisplayPcbTrackFill = !state;
displ_opts->m_DisplayPcbTrackFill = !state;
m_canvas->Refresh();
break;
case ID_TB_OPTIONS_SHOW_HIGH_CONTRAST_MODE:
{
DisplayOpt.ContrastModeDisplay = state;
displ_opts->m_ContrastModeDisplay = state;
m_canvas->Refresh();
break;
}
......
pcbnew/dialogs/dialog_pad_properties_base.cpp
View file @ 9cfb97d8
///////////////////////////////////////////////////////////////////////////
// C++ code generated with wxFormBuilder (version Jun 6 2014)
// C++ code generated with wxFormBuilder (version Jun 5 2014)
// http://www.wxformbuilder.org/
//
// PLEASE DO "NOT" EDIT THIS FILE!
......@@ -531,6 +531,7 @@ DIALOG_PAD_PROPERTIES_BASE::DIALOG_PAD_PROPERTIES_BASE( wxWindow* parent, wxWind
wxBoxSizer* bSizerDisplayPad;
bSizerDisplayPad = new wxBoxSizer( wxVERTICAL );
bSizerDisplayPad->SetMinSize( wxSize( 100,-1 ) );
m_panelShowPad = new wxPanel( this, wxID_ANY, wxDefaultPosition, wxSize( 200,200 ), wxFULL_REPAINT_ON_RESIZE|wxSIMPLE_BORDER );
m_panelShowPad->SetBackgroundColour( wxColour( 0, 0, 0 ) );
......
pcbnew/dialogs/dialog_pad_properties_base.fbp
View file @ 9cfb97d8
......@@ -8228,7 +8228,7 @@
<property name="flag">wxEXPAND|wxTOP|wxBOTTOM</property>
<property name="proportion">1</property>
<object class="wxBoxSizer" expanded="1">
<property name="minimum_size"></property>
<property name="minimum_size">100,-1</property>
<property name="name">bSizerDisplayPad</property>
<property name="orient">wxVERTICAL</property>
<property name="permission">none</property>
......
pcbnew/dialogs/dialog_pad_properties_base.h
View file @ 9cfb97d8
///////////////////////////////////////////////////////////////////////////
// C++ code generated with wxFormBuilder (version Jun 6 2014)
// C++ code generated with wxFormBuilder (version Jun 5 2014)
// http://www.wxformbuilder.org/
//
// PLEASE DO "NOT" EDIT THIS FILE!
......
pcbnew/edit.cpp
View file @ 9cfb97d8
......@@ -64,6 +64,7 @@ void PCB_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
INSTALL_UNBUFFERED_DC( dc, m_canvas );
MODULE* module;
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
m_canvas->CrossHairOff( &dc );
......@@ -442,7 +443,7 @@ void PCB_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
settings.m_CurrentViaType = v_type;
if( DisplayOpt.ContrastModeDisplay )
if( displ_opts->m_ContrastModeDisplay )
m_canvas->Refresh();
}
break;
......@@ -967,7 +968,7 @@ void PCB_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
{
// if user changed colors and we are in high contrast mode, then redraw
// because the PAD_SMD pads may change color.
if( DisplayOpt.ContrastModeDisplay && GetActiveLayer() != itmp )
if( displ_opts->m_ContrastModeDisplay && GetActiveLayer() != itmp )
{
m_canvas->Refresh();
}
......@@ -1010,7 +1011,7 @@ void PCB_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
case ID_TOOLBARH_PCB_SELECT_LAYER:
SetActiveLayer( ToLAYER_ID( m_SelLayerBox->GetLayerSelection() ) );
if( DisplayOpt.ContrastModeDisplay )
if( displ_opts->m_ContrastModeDisplay )
m_canvas->Refresh( true );
break;
......@@ -1310,6 +1311,7 @@ void PCB_EDIT_FRAME::RemoveStruct( BOARD_ITEM* Item, wxDC* DC )
void PCB_EDIT_FRAME::SwitchLayer( wxDC* DC, LAYER_ID layer )
{
LAYER_ID curLayer = GetActiveLayer();
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
// Check if the specified layer matches the present layer
if( layer == curLayer )
......@@ -1354,7 +1356,7 @@ void PCB_EDIT_FRAME::SwitchLayer( wxDC* DC, LAYER_ID layer )
if( Other_Layer_Route( (TRACK*) GetScreen()->GetCurItem(), DC ) )
{
if( DisplayOpt.ContrastModeDisplay )
if( displ_opts->m_ContrastModeDisplay )
m_canvas->Refresh();
}
......@@ -1373,7 +1375,7 @@ void PCB_EDIT_FRAME::SwitchLayer( wxDC* DC, LAYER_ID layer )
SetActiveLayer( layer );
if( DisplayOpt.ContrastModeDisplay )
if( displ_opts->m_ContrastModeDisplay )
m_canvas->Refresh();
}
......@@ -1386,6 +1388,7 @@ void PCB_EDIT_FRAME::OnSelectTool( wxCommandEvent& aEvent )
return;
INSTALL_UNBUFFERED_DC( dc, m_canvas );
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
// Stop the current command and deselect the current tool.
m_canvas->EndMouseCapture( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor() );
......@@ -1416,7 +1419,7 @@ void PCB_EDIT_FRAME::OnSelectTool( wxCommandEvent& aEvent )
case ID_PCB_ZONES_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _( "Add zones" ) );
if( DisplayOpt.DisplayZonesMode != 0 )
if( displ_opts->m_DisplayZonesMode != 0 )
DisplayInfoMessage( this, _( "Warning: zone display is OFF!!!" ) );
if( !GetBoard()->IsHighLightNetON() && (GetBoard()->GetHighLightNetCode() > 0 ) )
......
pcbnew/editedge.cpp
View file @ 9cfb97d8
......@@ -113,7 +113,8 @@ static void Move_Segment( EDA_DRAW_PANEL* aPanel, wxDC* aDC, const wxPoint& aPos
void PCB_EDIT_FRAME::Delete_Segment_Edge( DRAWSEGMENT* Segment, wxDC* DC )
{
EDA_ITEM* PtStruct;
int track_fill_copy = DisplayOpt.DisplayDrawItems;
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
int tmp = displ_opts->m_DisplayDrawItems;
if( Segment == NULL )
return;
......@@ -121,7 +122,7 @@ void PCB_EDIT_FRAME::Delete_Segment_Edge( DRAWSEGMENT* Segment, wxDC* DC )
if( Segment->IsNew() ) // Trace in progress.
{
// Delete current segment.
DisplayOpt.DisplayDrawItems = SKETCH;
displ_opts->m_DisplayDrawItems = SKETCH;
Segment->Draw( m_canvas, DC, GR_XOR );
PtStruct = Segment->Back();
Segment ->DeleteStructure();
......@@ -129,7 +130,7 @@ void PCB_EDIT_FRAME::Delete_Segment_Edge( DRAWSEGMENT* Segment, wxDC* DC )
if( PtStruct && (PtStruct->Type() == PCB_LINE_T ) )
Segment = (DRAWSEGMENT*) PtStruct;
DisplayOpt.DisplayDrawItems = track_fill_copy;
displ_opts->m_DisplayDrawItems = tmp;
SetCurItem( NULL );
}
else if( Segment->GetFlags() == 0 )
......@@ -334,13 +335,14 @@ void PCB_EDIT_FRAME::End_Edge( DRAWSEGMENT* Segment, wxDC* DC )
*/
static void DrawSegment( EDA_DRAW_PANEL* aPanel, wxDC* aDC, const wxPoint& aPosition, bool aErase )
{
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)aPanel->GetDisplayOptions();
DRAWSEGMENT* Segment = (DRAWSEGMENT*) aPanel->GetScreen()->GetCurItem();
int t_fill = DisplayOpt.DisplayDrawItems;
int tmp = displ_opts->m_DisplayDrawItems;
if( Segment == NULL )
return;
DisplayOpt.DisplayDrawItems = SKETCH;
displ_opts->m_DisplayDrawItems = SKETCH;
if( aErase )
Segment->Draw( aPanel, aDC, GR_XOR );
......@@ -360,5 +362,5 @@ static void DrawSegment( EDA_DRAW_PANEL* aPanel, wxDC* aDC, const wxPoint& aPosi
}
Segment->Draw( aPanel, aDC, GR_XOR );
DisplayOpt.DisplayDrawItems = t_fill;
displ_opts->m_DisplayDrawItems = tmp;
}
pcbnew/editrack.cpp
View file @ 9cfb97d8
......@@ -677,10 +677,11 @@ void ShowNewTrackWhenMovingCursor( EDA_DRAW_PANEL* aPanel, wxDC* aDC, const wxPo
PCB_SCREEN* screen = (PCB_SCREEN*) aPanel->GetScreen();
PCB_BASE_FRAME* frame = (PCB_BASE_FRAME*) aPanel->GetParent();
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*) aPanel->GetDisplayOptions();
bool Track_fill_copy = DisplayOpt.DisplayPcbTrackFill;
DisplayOpt.DisplayPcbTrackFill = true;
TRACE_CLEARANCE_DISPLAY_MODE_T showTrackClearanceMode = DisplayOpt.ShowTrackClearanceMode;
bool tmp = displ_opts->m_DisplayPcbTrackFill;
displ_opts->m_DisplayPcbTrackFill = true;
TRACE_CLEARANCE_DISPLAY_MODE_T showTrackClearanceMode = displ_opts->m_ShowTrackClearanceMode;
if ( g_FirstTrackSegment == NULL )
return;
......@@ -688,7 +689,7 @@ void ShowNewTrackWhenMovingCursor( EDA_DRAW_PANEL* aPanel, wxDC* aDC, const wxPo
NETCLASSPTR netclass = g_FirstTrackSegment->GetNetClass();
if( showTrackClearanceMode != DO_NOT_SHOW_CLEARANCE )
DisplayOpt.ShowTrackClearanceMode = SHOW_CLEARANCE_ALWAYS;
displ_opts->m_ShowTrackClearanceMode = SHOW_CLEARANCE_ALWAYS;
// Values to Via circle
int boardViaRadius = frame->GetDesignSettings().GetCurrentViaSize()/2;
......@@ -824,8 +825,8 @@ void ShowNewTrackWhenMovingCursor( EDA_DRAW_PANEL* aPanel, wxDC* aDC, const wxPo
msg.Printf( wxT( "%d" ), g_CurrentTrackList.GetCount() );
frame->AppendMsgPanel( _( "Segs Count" ), msg, DARKCYAN );
DisplayOpt.ShowTrackClearanceMode = showTrackClearanceMode;
DisplayOpt.DisplayPcbTrackFill = Track_fill_copy;
displ_opts->m_ShowTrackClearanceMode = showTrackClearanceMode;
displ_opts->m_DisplayPcbTrackFill = tmp;
frame->BuildAirWiresTargetsList( NULL, g_CurrentTrackSegment->GetEnd(), false );
frame->TraceAirWiresToTargets( aDC );
......
pcbnew/files.cpp
View file @ 9cfb97d8
......@@ -530,13 +530,6 @@ bool PCB_EDIT_FRAME::OpenProjectFiles( const std::vector<wxString>& aFileSet, in
}
}
// Update the option toolbar
m_DisplayPcbTrackFill = DisplayOpt.DisplayPcbTrackFill;
m_DisplayModText = DisplayOpt.DisplayModText;
m_DisplayModEdge = DisplayOpt.DisplayModEdge;
m_DisplayPadFill = DisplayOpt.DisplayPadFill;
m_DisplayViaFill = DisplayOpt.DisplayViaFill;
{
wxFileName fn = fullFileName;
......
pcbnew/hotkeys_board_editor.cpp
View file @ 9cfb97d8
......@@ -118,6 +118,7 @@ bool PCB_EDIT_FRAME::OnHotKey( wxDC* aDC, int aHotkeyCode, const wxPoint& aPosit
MODULE* module = NULL;
int evt_type = 0; //Used to post a wxCommandEvent on demand
PCB_SCREEN* screen = GetScreen();
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
/* Convert lower to upper case
* (the usual toupper function has problem with non ascii codes like function keys
......@@ -362,8 +363,7 @@ bool PCB_EDIT_FRAME::OnHotKey( wxDC* aDC, int aHotkeyCode, const wxPoint& aPosit
break;
case HK_SWITCH_TRACK_DISPLAY_MODE:
DisplayOpt.DisplayPcbTrackFill = !DisplayOpt.DisplayPcbTrackFill;
m_DisplayPcbTrackFill = DisplayOpt.DisplayPcbTrackFill;
displ_opts->m_DisplayPcbTrackFill = !displ_opts->m_DisplayPcbTrackFill;
m_canvas->Refresh();
break;
......@@ -457,7 +457,7 @@ bool PCB_EDIT_FRAME::OnHotKey( wxDC* aDC, int aHotkeyCode, const wxPoint& aPosit
if( !itemCurrentlyEdited ) // no track in progress: switch layer only
{
Other_Layer_Route( NULL, aDC );
if( DisplayOpt.ContrastModeDisplay )
if( displ_opts->m_ContrastModeDisplay )
m_canvas->Refresh();
break;
}
......@@ -552,7 +552,7 @@ bool PCB_EDIT_FRAME::OnHotKey( wxDC* aDC, int aHotkeyCode, const wxPoint& aPosit
break;
case HK_SWITCH_HIGHCONTRAST_MODE: // switch to high contrast mode and refresh the canvas
DisplayOpt.ContrastModeDisplay = !DisplayOpt.ContrastModeDisplay;
displ_opts->m_ContrastModeDisplay = !displ_opts->m_ContrastModeDisplay;
m_canvas->Refresh();
break;
......
pcbnew/modeditoptions.cpp
View file @ 9cfb97d8
/*
* This program source code file is part of KiCad, a free EDA CAD application.
*
* Copyright (C) 2012 Jean-Pierre Charras, jean-pierre.charras@ujf-grenoble.fr
* Copyright (C) 2015 Jean-Pierre Charras, jp.charras at wanadoo.fr
* Copyright (C) 2012 SoftPLC Corporation, Dick Hollenbeck <dick@softplc.com>
* Copyright (C) 2012 Wayne Stambaugh <stambaughw@verizon.net>
* Copyright (C) 1992-2012 KiCad Developers, see AUTHORS.txt for contributors.
......@@ -31,46 +31,50 @@
#include <fctsys.h>
#include <class_drawpanel.h>
#include <confirm.h>
#include <pcbnew.h>
#include <wxPcbStruct.h>
#include <module_editor_frame.h>
#include <class_board_design_settings.h>
#include <pcbnew_id.h>
#include <protos.h>
void FOOTPRINT_EDIT_FRAME::OnSelectOptionToolbar( wxCommandEvent& event )
{
int id = event.GetId();
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
bool state = m_optionsToolBar->GetToolToggled( id );
switch( id )
{
case ID_TB_OPTIONS_SHOW_PADS_SKETCH:
m_DisplayPadFill = !m_optionsToolBar->GetToolToggled( id );
displ_opts->m_DisplayPadFill = !state;
m_canvas->Refresh( );
break;
case ID_TB_OPTIONS_SHOW_VIAS_SKETCH:
m_DisplayViaFill = !m_optionsToolBar->GetToolToggled( id );
displ_opts->m_DisplayViaFill = !state;
m_canvas->Refresh( );
break;
case ID_TB_OPTIONS_SHOW_MODULE_TEXT_SKETCH:
m_DisplayModText = m_optionsToolBar->GetToolToggled( id ) ? SKETCH : FILLED;
displ_opts->m_DisplayModText = state ? SKETCH : FILLED;
m_canvas->Refresh( );
break;
case ID_TB_OPTIONS_SHOW_MODULE_EDGE_SKETCH:
m_DisplayModEdge = m_optionsToolBar->GetToolToggled( id ) ? SKETCH : FILLED;
displ_opts->m_DisplayModEdge = state ? SKETCH : FILLED;
m_canvas->Refresh( );
break;
case ID_TB_OPTIONS_SHOW_HIGH_CONTRAST_MODE:
displ_opts->m_ContrastModeDisplay = state;
m_canvas->Refresh( );
break;
default:
DisplayError( this,
wxT( "FOOTPRINT_EDIT_FRAME::OnSelectOptionToolbar error" ) );
wxMessageBox( wxT( "FOOTPRINT_EDIT_FRAME::OnSelectOptionToolbar error" ) );
break;
}
}
pcbnew/moduleframe.cpp
View file @ 9cfb97d8
......@@ -113,6 +113,7 @@ BEGIN_EVENT_TABLE( FOOTPRINT_EDIT_FRAME, PCB_BASE_FRAME )
EVT_TOOL( ID_TB_OPTIONS_SHOW_VIAS_SKETCH, FOOTPRINT_EDIT_FRAME::OnSelectOptionToolbar )
EVT_TOOL( ID_TB_OPTIONS_SHOW_MODULE_TEXT_SKETCH, FOOTPRINT_EDIT_FRAME::OnSelectOptionToolbar )
EVT_TOOL( ID_TB_OPTIONS_SHOW_MODULE_EDGE_SKETCH, FOOTPRINT_EDIT_FRAME::OnSelectOptionToolbar )
EVT_TOOL( ID_TB_OPTIONS_SHOW_HIGH_CONTRAST_MODE, FOOTPRINT_EDIT_FRAME::OnSelectOptionToolbar )
// popup commands
EVT_MENU_RANGE( ID_POPUP_PCB_START_RANGE, ID_POPUP_PCB_END_RANGE,
......@@ -160,6 +161,8 @@ BEGIN_EVENT_TABLE( FOOTPRINT_EDIT_FRAME, PCB_BASE_FRAME )
EVT_UPDATE_UI( ID_NO_TOOL_SELECTED, FOOTPRINT_EDIT_FRAME::OnUpdateVerticalToolbar )
EVT_UPDATE_UI_RANGE( ID_MODEDIT_PAD_TOOL, ID_MODEDIT_PLACE_GRID_COORD,
FOOTPRINT_EDIT_FRAME::OnUpdateVerticalToolbar )
EVT_UPDATE_UI( ID_TB_OPTIONS_SHOW_HIGH_CONTRAST_MODE,
FOOTPRINT_EDIT_FRAME::OnUpdateVerticalToolbar )
EVT_UPDATE_UI( ID_GEN_IMPORT_DXF_FILE,
FOOTPRINT_EDIT_FRAME::OnUpdateModuleSelected )
......@@ -193,6 +196,11 @@ FOOTPRINT_EDIT_FRAME::FOOTPRINT_EDIT_FRAME( KIWAY* aKiway, wxWindow* aParent ) :
SetGalCanvas( drawPanel );
SetBoard( new BOARD() );
// In modedit, the default net clearance is not known.
// (it depends on the actual board)
// So we do not show the default clearance, by setting it to 0
// The footprint or pad specific clearance will be shown
GetBoard()->GetDesignSettings().GetDefault()->SetClearance(0);
// restore the last footprint from the project, if any
restoreLastFootprint();
......
pcbnew/modules.cpp
View file @ 9cfb97d8
......@@ -387,7 +387,9 @@ void PCB_BASE_FRAME::PlaceModule( MODULE* aModule, wxDC* aDC, bool aDoNotRecreat
s_PickedList.ClearItemsList();
}
if( g_Show_Module_Ratsnest && ( GetBoard()->m_Status_Pcb & LISTE_PAD_OK ) && aDC )
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
if( displ_opts->m_Show_Module_Ratsnest && ( GetBoard()->m_Status_Pcb & LISTE_PAD_OK ) && aDC )
TraceModuleRatsNest( aDC );
newpos = GetCrossHairPosition();
......@@ -506,19 +508,20 @@ void DrawModuleOutlines( EDA_DRAW_PANEL* panel, wxDC* DC, MODULE* module )
return;
module->DrawEdgesOnly( panel, DC, g_Offset_Module, GR_XOR );
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)panel->GetDisplayOptions();
// Show pads in sketch mode to speedu up drawings
pad_fill_tmp = DisplayOpt.DisplayPadFill;
DisplayOpt.DisplayPadFill = true;
pad_fill_tmp = displ_opts->m_DisplayPadFill;
displ_opts->m_DisplayPadFill = true;
pt_pad = module->Pads();
for( ; pt_pad != NULL; pt_pad = pt_pad->Next() )
pt_pad->Draw( panel, DC, GR_XOR, g_Offset_Module );
DisplayOpt.DisplayPadFill = pad_fill_tmp;
displ_opts->m_DisplayPadFill = pad_fill_tmp;
if( g_Show_Module_Ratsnest && panel )
if( displ_opts->m_Show_Module_Ratsnest && panel )
{
PCB_BASE_FRAME* frame = (PCB_BASE_FRAME*) panel->GetParent();
frame->build_ratsnest_module( module );
......
pcbnew/modview_frame.cpp
View file @ 9cfb97d8
......@@ -30,14 +30,12 @@
#include <fctsys.h>
#include <pgm_base.h>
#include <kiway.h>
#include <gr_basic.h>
#include <class_drawpanel.h>
#include <pcb_draw_panel_gal.h>
#include <wxPcbStruct.h>
#include <3d_viewer.h>
#include <dialog_helpers.h>
#include <msgpanel.h>
#include <macros.h>
#include <fp_lib_table.h>
#include <fpid.h>
#include <confirm.h>
......@@ -133,6 +131,10 @@ FOOTPRINT_VIEWER_FRAME::FOOTPRINT_VIEWER_FRAME( KIWAY* aKiway, wxWindow* aParent
wxDefaultPosition, wxDefaultSize, 0, NULL, wxLB_HSCROLL );
SetBoard( new BOARD() );
// In viewer, the default net clearance is not known (it depends on the actual board).
// So we do not show the default clearance, by setting it to 0
// The footprint or pad specific clearance will be shown
GetBoard()->GetDesignSettings().GetDefault()->SetClearance(0);
// Ensure all layers and items are visible:
GetBoard()->SetVisibleAlls();
......
pcbnew/move_or_drag_track.cpp
View file @ 9cfb97d8
......@@ -103,11 +103,12 @@ static void Abort_MoveTrack( EDA_DRAW_PANEL* aPanel, wxDC* aDC )
static void Show_MoveNode( EDA_DRAW_PANEL* aPanel, wxDC* aDC, const wxPoint& aPosition,
bool aErase )
{
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*) aPanel->GetDisplayOptions();
wxPoint moveVector;
int tmp = DisplayOpt.DisplayPcbTrackFill;
int tmp = displ_opts->m_DisplayPcbTrackFill;
GR_DRAWMODE draw_mode = GR_XOR | GR_HIGHLIGHT;
DisplayOpt.DisplayPcbTrackFill = false;
displ_opts->m_DisplayPcbTrackFill = false;
#ifndef USE_WX_OVERLAY
aErase = true;
......@@ -142,7 +143,7 @@ static void Show_MoveNode( EDA_DRAW_PANEL* aPanel, wxDC* aDC, const wxPoint& aPo
track->Draw( aPanel, aDC, draw_mode );
}
DisplayOpt.DisplayPcbTrackFill = tmp;
displ_opts->m_DisplayPcbTrackFill = tmp;
// Display track length
if( track )
......
pcbnew/pcb_draw_panel_gal.cpp
View file @ 9cfb97d8
......@@ -33,6 +33,7 @@
#include <class_board.h>
#include <class_module.h>
#include <class_track.h>
#include <draw_frame.h>
#include <boost/bind.hpp>
......@@ -148,8 +149,16 @@ EDA_DRAW_PANEL_GAL( aParentWindow, aWindowId, aPosition, aSize, aGalType )
m_view->SetLayerTarget( ITEM_GAL_LAYER( GP_OVERLAY ), KIGFX::TARGET_OVERLAY );
m_view->SetLayerTarget( ITEM_GAL_LAYER( RATSNEST_VISIBLE ), KIGFX::TARGET_OVERLAY );
// Load display options (such as filled/outline display of items)
static_cast<KIGFX::PCB_RENDER_SETTINGS*>( m_view->GetPainter()->GetSettings() )->LoadDisplayOptions( DisplayOpt );
// Load display options (such as filled/outline display of items).
// Can be made only if the parent windos is a EDA_DRAW_FRAME (or a derived class)
// which is not always the case (namely when it is used from a wxDialog like the pad editor)
EDA_DRAW_FRAME* frame = dynamic_cast <EDA_DRAW_FRAME*> ( aParentWindow );
if( frame )
{
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*) frame->GetDisplayOptions();
static_cast<KIGFX::PCB_RENDER_SETTINGS*>( m_view->GetPainter()->GetSettings() )->LoadDisplayOptions( displ_opts );
}
}
......@@ -198,7 +207,16 @@ void PCB_DRAW_PANEL_GAL::DisplayBoard( const BOARD* aBoard )
m_view->Add( m_ratsnest );
UseColorScheme( aBoard->GetColorsSettings() );
static_cast<KIGFX::PCB_RENDER_SETTINGS*>( m_view->GetPainter()->GetSettings() )->LoadDisplayOptions( DisplayOpt );
// We are expecting here the parent frame is a EDA_DRAW_FRAME or a derived class
// (usually a BASE_PCB_FRAME, PCB_EDIT_FRAME ...)
EDA_DRAW_FRAME* frame = dynamic_cast <EDA_DRAW_FRAME*> ( GetParent() );
if( frame )
{
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*) frame->GetDisplayOptions();
static_cast<KIGFX::PCB_RENDER_SETTINGS*>( m_view->GetPainter()->GetSettings() )->LoadDisplayOptions( displ_opts );
}
m_view->RecacheAllItems( true );
}
......
pcbnew/pcb_painter.cpp
View file @ 9cfb97d8
......@@ -98,19 +98,22 @@ void PCB_RENDER_SETTINGS::ImportLegacyColors( const COLORS_DESIGN_SETTINGS* aSet
}
void PCB_RENDER_SETTINGS::LoadDisplayOptions( const DISPLAY_OPTIONS& aOptions )
void PCB_RENDER_SETTINGS::LoadDisplayOptions( const DISPLAY_OPTIONS* aOptions )
{
m_hiContrastEnabled = aOptions.ContrastModeDisplay;
m_padNumbers = aOptions.DisplayPadNum;
if( aOptions == NULL )
return;
m_hiContrastEnabled = aOptions->m_ContrastModeDisplay;
m_padNumbers = aOptions->m_DisplayPadNum;
// Whether to draw tracks, vias & pads filled or as outlines
m_sketchMode[ITEM_GAL_LAYER( PADS_VISIBLE )] = !aOptions.DisplayPadFill;
m_sketchMode[ITEM_GAL_LAYER( VIA_THROUGH_VISIBLE )] = !aOptions.DisplayViaFill;
m_sketchMode[ITEM_GAL_LAYER( VIA_BBLIND_VISIBLE )] = !aOptions.DisplayViaFill;
m_sketchMode[ITEM_GAL_LAYER( VIA_MICROVIA_VISIBLE )] = !aOptions.DisplayViaFill;
m_sketchMode[ITEM_GAL_LAYER( TRACKS_VISIBLE )] = !aOptions.DisplayPcbTrackFill;
m_sketchMode[ITEM_GAL_LAYER( PADS_VISIBLE )] = !aOptions->m_DisplayPadFill;
m_sketchMode[ITEM_GAL_LAYER( VIA_THROUGH_VISIBLE )] = !aOptions->m_DisplayViaFill;
m_sketchMode[ITEM_GAL_LAYER( VIA_BBLIND_VISIBLE )] = !aOptions->m_DisplayViaFill;
m_sketchMode[ITEM_GAL_LAYER( VIA_MICROVIA_VISIBLE )] = !aOptions->m_DisplayViaFill;
m_sketchMode[ITEM_GAL_LAYER( TRACKS_VISIBLE )] = !aOptions->m_DisplayPcbTrackFill;
switch( aOptions.DisplayNetNamesMode )
switch( aOptions->m_DisplayNetNamesMode )
{
case 0:
m_netNamesOnPads = false;
......@@ -133,7 +136,7 @@ void PCB_RENDER_SETTINGS::LoadDisplayOptions( const DISPLAY_OPTIONS& aOptions )
break;
}
switch( aOptions.DisplayZonesMode )
switch( aOptions->m_DisplayZonesMode )
{
case 0:
m_displayZoneMode = DZ_SHOW_FILLED;
......
pcbnew/pcb_painter.h
View file @ 9cfb97d8
......@@ -87,7 +87,7 @@ public:
* for vias/pads/tracks and so on).
* @param aOptions are settings that you want to use for displaying items.
*/
void LoadDisplayOptions( const DISPLAY_OPTIONS& aOptions );
void LoadDisplayOptions( const DISPLAY_OPTIONS* aOptions );
/// @copydoc RENDER_SETTINGS::GetColor()
virtual const COLOR4D& GetColor( const VIEW_ITEM* aItem, int aLayer ) const;
......
pcbnew/pcbframe.cpp
View file @ 9cfb97d8
......@@ -370,15 +370,6 @@ PCB_EDIT_FRAME::PCB_EDIT_FRAME( KIWAY* aKiway, wxWindow* aParent ) :
// initialize parameters in m_LayersManager
LoadSettings( config() );
// Be sure options are updated
m_DisplayPcbTrackFill = DisplayOpt.DisplayPcbTrackFill;
m_DisplayPadFill = DisplayOpt.DisplayPadFill;
m_DisplayViaFill = DisplayOpt.DisplayViaFill;
m_DisplayPadNum = DisplayOpt.DisplayPadNum;
m_DisplayModEdge = DisplayOpt.DisplayModEdge;
m_DisplayModText = DisplayOpt.DisplayModText;
SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y );
GetScreen()->AddGrid( m_UserGridSize, m_UserGridUnit, ID_POPUP_GRID_USER );
......
pcbnew/pcbnew.cpp
View file @ 9cfb97d8
......@@ -65,7 +65,6 @@ COLORS_DESIGN_SETTINGS g_ColorsSettings;
bool g_Drc_On = true;
bool g_AutoDeleteOldTrack = true;
bool g_Show_Module_Ratsnest;
bool g_Raccord_45_Auto = true;
bool g_Alternate_Track_Posture = false;
bool g_Track_45_Only_Allowed = true; // True to allow horiz, vert. and 45deg only tracks
......@@ -74,14 +73,11 @@ bool g_TwoSegmentTrackBuild = true;
LAYER_ID g_Route_Layer_TOP;
LAYER_ID g_Route_Layer_BOTTOM;
int g_MaxLinksShowed;
int g_MagneticPadOption = capture_cursor_in_track_tool;
int g_MagneticTrackOption = capture_cursor_in_track_tool;
wxPoint g_Offset_Module; // module offset used when moving a footprint
DISPLAY_OPTIONS DisplayOpt; // General display options
/* Name of the document footprint list
* usually located in share/modules/footprints_doc
* this is of the responsibility to users to create this file
......
pcbnew/pcbnew.h
View file @ 9cfb97d8
......@@ -79,7 +79,6 @@ extern wxString g_DocModulesFileName;
// variables
extern bool g_Drc_On;
extern bool g_AutoDeleteOldTrack;
extern bool g_Show_Module_Ratsnest;
extern bool g_Raccord_45_Auto;
extern bool g_Track_45_Only_Allowed;
extern bool g_Alternate_Track_Posture;
......@@ -89,7 +88,6 @@ extern bool g_Segments_45_Only;
extern LAYER_ID g_Route_Layer_TOP;
extern LAYER_ID g_Route_Layer_BOTTOM;
extern int g_MaxLinksShowed; // Max count links showed in routing
extern bool g_TwoSegmentTrackBuild;
extern int g_MagneticPadOption;
......@@ -104,9 +102,6 @@ extern DLIST<TRACK> g_CurrentTrackList;
#define g_FirstTrackSegment g_CurrentTrackList.GetFirst() ///< first segment created
class DISPLAY_OPTIONS;
extern DISPLAY_OPTIONS DisplayOpt;
enum MagneticPadOptionValues {
no_effect,
capture_cursor_in_track_tool,
......
pcbnew/pcbnew_config.cpp
View file @ 9cfb97d8
......@@ -322,6 +322,8 @@ PARAM_CFG_ARRAY PCB_EDIT_FRAME::GetProjectFileParameters()
PARAM_CFG_ARRAY& PCB_EDIT_FRAME::GetConfigurationSettings()
{
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
if( m_configSettings.empty() )
{
COLORS_DESIGN_SETTINGS cds; // constructor fills this with sensible colors
......@@ -331,35 +333,35 @@ PARAM_CFG_ARRAY& PCB_EDIT_FRAME::GetConfigurationSettings()
(int*)&g_UserUnit, MILLIMETRES ) );
m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "DisplayPolarCoords" ),
&DisplayOpt.DisplayPolarCood, false ) );
&displ_opts->m_DisplayPolarCood, false ) );
// Display options and modes:
m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "ViaHoleDisplayMode" ),
(int*) &DisplayOpt.m_DisplayViaMode,
(int*) &displ_opts->m_DisplayViaMode,
VIA_SPECIAL_HOLE_SHOW, VIA_HOLE_NOT_SHOW,
OPT_VIA_HOLE_END - 1 ) );
m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "ShowNetNamesMode" ),
&DisplayOpt.DisplayNetNamesMode, 3, 0, 3 ) );
&displ_opts->m_DisplayNetNamesMode, 3, 0, 3 ) );
m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "DisplayTrackFilled" ),
&DisplayOpt.DisplayPcbTrackFill, true ) );
&displ_opts->m_DisplayPcbTrackFill, true ) );
m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "TrackDisplayClearance" ),
(int*) &DisplayOpt.ShowTrackClearanceMode,
(int*) &displ_opts->m_ShowTrackClearanceMode,
SHOW_CLEARANCE_NEW_TRACKS_AND_VIA_AREAS ) );
m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "PadFill" ),
&DisplayOpt.DisplayPadFill, true ) );
&displ_opts->m_DisplayPadFill, true ) );
m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "ViaFill" ),
&DisplayOpt.DisplayViaFill, true ) );
&displ_opts->m_DisplayViaFill, true ) );
m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "PadAffG" ),
&DisplayOpt.DisplayPadIsol, true ) );
&displ_opts->m_DisplayPadIsol, true ) );
m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "PadSNum" ),
&DisplayOpt.DisplayPadNum, true ) );
&displ_opts->m_DisplayPadNum, true ) );
m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "ModAffC" ),
&DisplayOpt.DisplayModEdge, FILLED, 0, 2 ) );
&displ_opts->m_DisplayModEdge, FILLED, 0, 2 ) );
m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "ModAffT" ),
&DisplayOpt.DisplayModText, FILLED, 0, 2 ) );
&displ_opts->m_DisplayModText, FILLED, 0, 2 ) );
m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "PcbAffT" ),
&DisplayOpt.DisplayDrawItems, FILLED, 0, 2 ) );
&displ_opts->m_DisplayDrawItems, FILLED, 0, 2 ) );
m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "PcbShowZonesMode" ),
&DisplayOpt.DisplayZonesMode, 0, 0, 2 ) );
&displ_opts->m_DisplayZonesMode, 0, 0, 2 ) );
// layer colors:
wxASSERT( DIM( cds.m_LayersColors ) == LAYER_ID_COUNT );
......@@ -406,10 +408,11 @@ PARAM_CFG_ARRAY& PCB_EDIT_FRAME::GetConfigurationSettings()
// Miscellaneous:
m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "RotationAngle" ), &m_rotationAngle,
900, 1, 900 ) );
m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "MaxLnkS" ), &g_MaxLinksShowed,
m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "MaxLnkS" ),
&displ_opts->m_MaxLinksShowed,
3, 0, 15 ) );
m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "ShowMRa" ),
&g_Show_Module_Ratsnest, true ) );
&displ_opts->m_Show_Module_Ratsnest, true ) );
m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "TwoSegT" ),
&g_TwoSegmentTrackBuild, true ) );
m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "SegmPcb45Only" )
......
pcbnew/print_board_functions.cpp
View file @ 9cfb97d8
......@@ -52,6 +52,7 @@ void FOOTPRINT_EDIT_FRAME::PrintPage( wxDC* aDC,
{
GR_DRAWMODE drawmode = GR_COPY;
int defaultPenSize = Millimeter2iu( 0.2 );
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
DISPLAY_OPTIONS save_opt;
......@@ -61,25 +62,22 @@ void FOOTPRINT_EDIT_FRAME::PrintPage( wxDC* aDC,
if( printParameters )
defaultPenSize = printParameters->m_PenDefaultSize;
save_opt = DisplayOpt;
save_opt = *displ_opts;
DisplayOpt.ContrastModeDisplay = false;
DisplayOpt.DisplayPadFill = true;
DisplayOpt.DisplayViaFill = true;
m_DisplayPadFill = DisplayOpt.DisplayPadFill;
m_DisplayViaFill = DisplayOpt.DisplayViaFill;
m_DisplayPadNum = DisplayOpt.DisplayPadNum = false;
displ_opts->m_ContrastModeDisplay = false;
displ_opts->m_DisplayPadFill = true;
displ_opts->m_DisplayViaFill = true;
displ_opts->m_DisplayPadNum = false;
bool nctmp = GetBoard()->IsElementVisible(NO_CONNECTS_VISIBLE);
GetBoard()->SetElementVisibility(NO_CONNECTS_VISIBLE, false);
DisplayOpt.DisplayPadIsol = false;
DisplayOpt.DisplayModEdge = FILLED;
DisplayOpt.DisplayModText = FILLED;
m_DisplayPcbTrackFill = DisplayOpt.DisplayPcbTrackFill = true;
DisplayOpt.ShowTrackClearanceMode = DO_NOT_SHOW_CLEARANCE;
DisplayOpt.DisplayDrawItems = FILLED;
DisplayOpt.DisplayZonesMode = 0;
DisplayOpt.DisplayNetNamesMode = 0;
displ_opts->m_DisplayPadIsol = false;
displ_opts->m_DisplayModEdge = FILLED;
displ_opts->m_DisplayModText = FILLED;
displ_opts->m_DisplayPcbTrackFill = true;
displ_opts->m_ShowTrackClearanceMode = DO_NOT_SHOW_CLEARANCE;
displ_opts->m_DisplayDrawItems = FILLED;
displ_opts->m_DisplayZonesMode = 0;
displ_opts->m_DisplayNetNamesMode = 0;
m_canvas->SetPrintMirrored( aPrintMirrorMode );
......@@ -109,11 +107,7 @@ void FOOTPRINT_EDIT_FRAME::PrintPage( wxDC* aDC,
m_canvas->SetPrintMirrored( false );
DisplayOpt = save_opt;
m_DisplayPcbTrackFill = DisplayOpt.DisplayPcbTrackFill;
m_DisplayPadFill = DisplayOpt.DisplayPadFill;
m_DisplayViaFill = DisplayOpt.DisplayViaFill;
m_DisplayPadNum = DisplayOpt.DisplayPadNum;
*displ_opts = save_opt;
GetBoard()->SetElementVisibility( NO_CONNECTS_VISIBLE, nctmp );
}
......@@ -130,6 +124,7 @@ void PCB_EDIT_FRAME::PrintPage( wxDC* aDC,
bool onePagePerLayer = false;
PRINT_PARAMETERS* printParameters = (PRINT_PARAMETERS*) aData; // can be null
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
if( printParameters && printParameters->m_OptionPrintPage == 0 )
onePagePerLayer = true;
......@@ -142,13 +137,13 @@ void PCB_EDIT_FRAME::PrintPage( wxDC* aDC,
defaultPenSize = printParameters->m_PenDefaultSize;
}
save_opt = DisplayOpt;
save_opt = *displ_opts;
LAYER_ID activeLayer = GetScreen()->m_Active_Layer;
DisplayOpt.ContrastModeDisplay = false;
DisplayOpt.DisplayPadFill = true;
DisplayOpt.DisplayViaFill = true;
displ_opts->m_ContrastModeDisplay = false;
displ_opts->m_DisplayPadFill = true;
displ_opts->m_DisplayViaFill = true;
if( !( aPrintMask & LSET::AllCuMask() ).any() )
{
......@@ -157,8 +152,8 @@ void PCB_EDIT_FRAME::PrintPage( wxDC* aDC,
// We can print mask layers (solder mask and solder paste) with the actual
// pad sizes. To do that, we must set ContrastModeDisplay to true and set
// the GetScreen()->m_Active_Layer to the current printed layer
DisplayOpt.ContrastModeDisplay = true;
DisplayOpt.DisplayPadFill = true;
displ_opts->m_ContrastModeDisplay = true;
displ_opts->m_DisplayPadFill = true;
// Calculate the active layer number to print from its mask layer:
GetScreen()->m_Active_Layer = B_Cu;
......@@ -176,18 +171,16 @@ void PCB_EDIT_FRAME::PrintPage( wxDC* aDC,
if( GetScreen()->m_Active_Layer == B_SilkS ||
GetScreen()->m_Active_Layer == F_SilkS )
{
DisplayOpt.DisplayPadFill = false;
displ_opts->m_DisplayPadFill = false;
}
}
else
{
DisplayOpt.DisplayPadFill = false;
displ_opts->m_DisplayPadFill = false;
}
}
m_DisplayPadFill = DisplayOpt.DisplayPadFill;
m_DisplayViaFill = DisplayOpt.DisplayViaFill;
m_DisplayPadNum = DisplayOpt.DisplayPadNum = false;
displ_opts->m_DisplayPadNum = false;
bool nctmp = GetBoard()->IsElementVisible( NO_CONNECTS_VISIBLE );
......@@ -197,14 +190,14 @@ void PCB_EDIT_FRAME::PrintPage( wxDC* aDC,
GetBoard()->SetElementVisibility( ANCHOR_VISIBLE, false );
DisplayOpt.DisplayPadIsol = false;
m_DisplayModEdge = DisplayOpt.DisplayModEdge = FILLED;
m_DisplayModText = DisplayOpt.DisplayModText = FILLED;
m_DisplayPcbTrackFill = DisplayOpt.DisplayPcbTrackFill = true;
DisplayOpt.ShowTrackClearanceMode = DO_NOT_SHOW_CLEARANCE;
DisplayOpt.DisplayDrawItems = FILLED;
DisplayOpt.DisplayZonesMode = 0;
DisplayOpt.DisplayNetNamesMode = 0;
displ_opts->m_DisplayPadIsol = false;
displ_opts->m_DisplayModEdge = FILLED;
displ_opts->m_DisplayModText = FILLED;
displ_opts->m_DisplayPcbTrackFill = true;
displ_opts->m_ShowTrackClearanceMode = DO_NOT_SHOW_CLEARANCE;
displ_opts->m_DisplayDrawItems = FILLED;
displ_opts->m_DisplayZonesMode = 0;
displ_opts->m_DisplayNetNamesMode = 0;
m_canvas->SetPrintMirrored( aPrintMirrorMode );
......@@ -331,14 +324,8 @@ void PCB_EDIT_FRAME::PrintPage( wxDC* aDC,
m_canvas->SetPrintMirrored( false );
DisplayOpt = save_opt;
*displ_opts = save_opt;
GetScreen()->m_Active_Layer = activeLayer;
m_DisplayPcbTrackFill = DisplayOpt.DisplayPcbTrackFill;
m_DisplayPadFill = DisplayOpt.DisplayPadFill;
m_DisplayViaFill = DisplayOpt.DisplayViaFill;
m_DisplayPadNum = DisplayOpt.DisplayPadNum;
m_DisplayModEdge = DisplayOpt.DisplayModEdge;
m_DisplayModText = DisplayOpt.DisplayModText;
GetBoard()->SetElementVisibility( NO_CONNECTS_VISIBLE, nctmp );
GetBoard()->SetElementVisibility( ANCHOR_VISIBLE, anchorsTmp );
......
pcbnew/ratsnest.cpp
View file @ 9cfb97d8
......@@ -917,10 +917,11 @@ void PCB_BASE_FRAME::TraceAirWiresToTargets( wxDC* aDC )
return;
GRSetDrawMode( aDC, GR_XOR );
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
for( int ii = 0; ii < (int) s_TargetsLocations.size(); ii++ )
{
if( ii >= g_MaxLinksShowed )
if( ii >= displ_opts->m_MaxLinksShowed )
break;
GRLine( m_canvas->GetClipBox(), aDC, s_CursorPos, s_TargetsLocations[ii], 0, YELLOW );
......
pcbnew/router/router_tool.cpp
View file @ 9cfb97d8
......@@ -338,11 +338,14 @@ PNS_ITEM* ROUTER_TOOL::pickSingleItem( const VECTOR2I& aWhere, int aNet, int aLa
}
PNS_ITEM* rv = NULL;
PCB_EDIT_FRAME* frame = getEditFrame<PCB_EDIT_FRAME> ();
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)frame->GetDisplayOptions();
for( int i = 0; i < 4; i++ )
{
PNS_ITEM* item = prioritized[i];
if( DisplayOpt.ContrastModeDisplay )
if( displ_opts->m_ContrastModeDisplay )
if( item && !item->Layers().Overlaps( tl ) )
item = NULL;
......
pcbnew/tool_modedit.cpp
View file @ 9cfb97d8
......@@ -240,6 +240,11 @@ void FOOTPRINT_EDIT_FRAME::ReCreateOptToolbar()
KiBitmap( show_mod_edge_xpm ),
_( "Show Edges Sketch" ), wxITEM_CHECK );
m_optionsToolBar->AddTool( ID_TB_OPTIONS_SHOW_HIGH_CONTRAST_MODE, wxEmptyString,
KiBitmap( contrast_mode_xpm ),
_( "Enable high contrast display mode" ),
wxITEM_CHECK );
m_optionsToolBar->Realize();
}
......
pcbnew/toolbars_update_user_interface.cpp
View file @ 9cfb97d8
......@@ -117,11 +117,12 @@ void PCB_EDIT_FRAME::OnUpdateScriptingConsoleState( wxUpdateUIEvent& aEvent )
void PCB_EDIT_FRAME::OnUpdateZoneDisplayStyle( wxUpdateUIEvent& aEvent )
{
int selected = aEvent.GetId() - ID_TB_OPTIONS_SHOW_ZONES;
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
if( aEvent.IsChecked() && ( DisplayOpt.DisplayZonesMode == selected ) )
if( aEvent.IsChecked() && ( displ_opts->m_DisplayZonesMode == selected ) )
return;
aEvent.Check( DisplayOpt.DisplayZonesMode == selected );
aEvent.Check( displ_opts->m_DisplayZonesMode == selected );
}
......@@ -147,9 +148,10 @@ void PCB_EDIT_FRAME::OnUpdateShowBoardRatsnest( wxUpdateUIEvent& aEvent )
void PCB_EDIT_FRAME::OnUpdateShowModuleRatsnest( wxUpdateUIEvent& aEvent )
{
aEvent.Check( g_Show_Module_Ratsnest );
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
aEvent.Check( displ_opts->m_Show_Module_Ratsnest );
m_optionsToolBar->SetToolShortHelp( ID_TB_OPTIONS_SHOW_MODULE_RATSNEST,
g_Show_Module_Ratsnest ?
displ_opts->m_Show_Module_Ratsnest ?
_( "Hide footprint ratsnest" ) :
_( "Show footprint ratsnest" ) );
}
......@@ -167,9 +169,10 @@ void PCB_EDIT_FRAME::OnUpdateAutoDeleteTrack( wxUpdateUIEvent& aEvent )
void PCB_EDIT_FRAME::OnUpdateViaDrawMode( wxUpdateUIEvent& aEvent )
{
aEvent.Check( !m_DisplayViaFill );
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
aEvent.Check( !displ_opts->m_DisplayViaFill );
m_optionsToolBar->SetToolShortHelp( ID_TB_OPTIONS_SHOW_VIAS_SKETCH,
m_DisplayViaFill ?
displ_opts->m_DisplayViaFill ?
_( "Show vias in outline mode" ) :
_( "Show vias in fill mode" ) );
}
......@@ -177,9 +180,10 @@ void PCB_EDIT_FRAME::OnUpdateViaDrawMode( wxUpdateUIEvent& aEvent )
void PCB_EDIT_FRAME::OnUpdateTraceDrawMode( wxUpdateUIEvent& aEvent )
{
aEvent.Check( !m_DisplayPcbTrackFill );
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
aEvent.Check( !displ_opts->m_DisplayPcbTrackFill );
m_optionsToolBar->SetToolShortHelp( ID_TB_OPTIONS_SHOW_TRACKS_SKETCH,
m_DisplayPcbTrackFill ?
displ_opts->m_DisplayPcbTrackFill ?
_( "Show tracks in outline mode" ) :
_( "Show tracks in fill mode" ) );
}
......@@ -187,9 +191,10 @@ void PCB_EDIT_FRAME::OnUpdateTraceDrawMode( wxUpdateUIEvent& aEvent )
void PCB_EDIT_FRAME::OnUpdateHighContrastDisplayMode( wxUpdateUIEvent& aEvent )
{
aEvent.Check( DisplayOpt.ContrastModeDisplay );
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
aEvent.Check( displ_opts->m_ContrastModeDisplay );
m_optionsToolBar->SetToolShortHelp( ID_TB_OPTIONS_SHOW_HIGH_CONTRAST_MODE,
DisplayOpt.ContrastModeDisplay ?
displ_opts->m_ContrastModeDisplay ?
_( "Normal contrast display mode" ) :
_( "High contrast display mode" ) );
}
......
pcbnew/tools/pcbnew_control.cpp
View file @ 9cfb97d8
......@@ -148,9 +148,9 @@ int PCBNEW_CONTROL::TrackDisplayMode( TOOL_EVENT& aEvent )
static_cast<KIGFX::PCB_RENDER_SETTINGS*>( painter->GetSettings() );
// Apply new display options to the GAL canvas
DisplayOpt.DisplayPcbTrackFill = !DisplayOpt.DisplayPcbTrackFill;
m_frame->m_DisplayPcbTrackFill = DisplayOpt.DisplayPcbTrackFill;
settings->LoadDisplayOptions( DisplayOpt );
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)m_frame->GetDisplayOptions();
displ_opts->m_DisplayPcbTrackFill = !displ_opts->m_DisplayPcbTrackFill;
settings->LoadDisplayOptions( displ_opts );
for( TRACK* track = getModel<BOARD>()->m_Track; track; track = track->Next() )
{
......@@ -171,11 +171,11 @@ int PCBNEW_CONTROL::PadDisplayMode( TOOL_EVENT& aEvent )
static_cast<KIGFX::PCB_PAINTER*>( m_frame->GetGalCanvas()->GetView()->GetPainter() );
KIGFX::PCB_RENDER_SETTINGS* settings =
static_cast<KIGFX::PCB_RENDER_SETTINGS*>( painter->GetSettings() );
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)m_frame->GetDisplayOptions();
// Apply new display options to the GAL canvas
DisplayOpt.DisplayPadFill = !DisplayOpt.DisplayPadFill;
m_frame->m_DisplayPadFill = DisplayOpt.DisplayPadFill;
settings->LoadDisplayOptions( DisplayOpt );
displ_opts->m_DisplayPadFill = !displ_opts->m_DisplayPadFill;
settings->LoadDisplayOptions( displ_opts );
for( MODULE* module = getModel<BOARD>()->m_Modules; module; module = module->Next() )
{
......@@ -196,11 +196,11 @@ int PCBNEW_CONTROL::ViaDisplayMode( TOOL_EVENT& aEvent )
static_cast<KIGFX::PCB_PAINTER*>( m_frame->GetGalCanvas()->GetView()->GetPainter() );
KIGFX::PCB_RENDER_SETTINGS* settings =
static_cast<KIGFX::PCB_RENDER_SETTINGS*>( painter->GetSettings() );
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)m_frame->GetDisplayOptions();
// Apply new display options to the GAL canvas
DisplayOpt.DisplayViaFill = !DisplayOpt.DisplayViaFill;
m_frame->m_DisplayViaFill = DisplayOpt.DisplayViaFill;
settings->LoadDisplayOptions( DisplayOpt );
displ_opts->m_DisplayViaFill = !displ_opts->m_DisplayViaFill;
settings->LoadDisplayOptions( displ_opts );
for( TRACK* track = getModel<BOARD>()->m_Track; track; track = track->Next() )
{
......@@ -221,18 +221,19 @@ int PCBNEW_CONTROL::ZoneDisplayMode( TOOL_EVENT& aEvent )
static_cast<KIGFX::PCB_PAINTER*>( m_frame->GetGalCanvas()->GetView()->GetPainter() );
KIGFX::PCB_RENDER_SETTINGS* settings =
static_cast<KIGFX::PCB_RENDER_SETTINGS*>( painter->GetSettings() );
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)m_frame->GetDisplayOptions();
// Apply new display options to the GAL canvas
if( aEvent.IsAction( &COMMON_ACTIONS::zoneDisplayEnable ) )
DisplayOpt.DisplayZonesMode = 0;
displ_opts->m_DisplayZonesMode = 0;
else if( aEvent.IsAction( &COMMON_ACTIONS::zoneDisplayDisable ) )
DisplayOpt.DisplayZonesMode = 1;
displ_opts->m_DisplayZonesMode = 1;
else if( aEvent.IsAction( &COMMON_ACTIONS::zoneDisplayOutlines ) )
DisplayOpt.DisplayZonesMode = 2;
displ_opts->m_DisplayZonesMode = 2;
else
assert( false );
settings->LoadDisplayOptions( DisplayOpt );
settings->LoadDisplayOptions( displ_opts );
BOARD* board = getModel<BOARD>();
for( int i = 0; i < board->GetAreaCount(); ++i )
......@@ -251,9 +252,10 @@ int PCBNEW_CONTROL::HighContrastMode( TOOL_EVENT& aEvent )
static_cast<KIGFX::PCB_PAINTER*>( m_frame->GetGalCanvas()->GetView()->GetPainter() );
KIGFX::PCB_RENDER_SETTINGS* settings =
static_cast<KIGFX::PCB_RENDER_SETTINGS*> ( painter->GetSettings() );
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)m_frame->GetDisplayOptions();
DisplayOpt.ContrastModeDisplay = !DisplayOpt.ContrastModeDisplay;
settings->LoadDisplayOptions( DisplayOpt );
displ_opts->m_ContrastModeDisplay = !displ_opts->m_ContrastModeDisplay;
settings->LoadDisplayOptions( displ_opts );
m_frame->GetGalCanvas()->SetHighContrastLayer( m_frame->GetActiveLayer() );
setTransitions();
......
pcbnew/tracepcb.cpp
View file @ 9cfb97d8
......@@ -71,9 +71,7 @@ void FOOTPRINT_EDIT_FRAME::RedrawActiveWindow( wxDC* DC, bool EraseBg )
// Redraw the footprints
for( MODULE* module = GetBoard()->m_Modules; module; module = module->Next() )
{
module->Draw( m_canvas, DC, GR_OR );
}
module->Draw( m_canvas, DC, GR_OR | GR_ALLOW_HIGHCONTRAST );
#ifdef USE_WX_OVERLAY
......@@ -297,11 +295,11 @@ void BOARD::DrawHighLight( EDA_DRAW_PANEL* am_canvas, wxDC* DC, int aNetCode )
static void Trace_Pads_Only( EDA_DRAW_PANEL* panel, wxDC* DC, MODULE* aModule,
int ox, int oy, LSET aLayerMask, GR_DRAWMODE draw_mode )
{
PCB_BASE_FRAME* frame = (PCB_BASE_FRAME*) panel->GetParent();
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)panel->GetDisplayOptions();
int tmp = frame->m_DisplayPadFill;
int tmp = displ_opts->m_DisplayPadFill;
frame->m_DisplayPadFill = false;
displ_opts->m_DisplayPadFill = false;
// Draw pads.
for( D_PAD* pad = aModule->Pads(); pad; pad = pad->Next() )
......@@ -312,5 +310,5 @@ static void Trace_Pads_Only( EDA_DRAW_PANEL* panel, wxDC* DC, MODULE* aModule,
pad->Draw( panel, DC, draw_mode, wxPoint( ox, oy ) );
}
frame->m_DisplayPadFill = tmp;
displ_opts->m_DisplayPadFill = tmp;
}
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment