Road map and Doxygen work.

* Remove obsolete settings from Doxygen configuration file.
* Fix some Doxygen warnings.
* Add the board edge segment snapping to developers road map.
* Fix some coding style issues in CMakeLists.txt

CMakeLists.txt

@@ -682,7 +682,7 @@ add_dependencies( pl_editor boost )
 add_dependencies( pnsrouter boost )
 
 
-if ( KICAD_BUILD_STATIC OR KICAD_BUILD_DYNAMIC )
+if( KICAD_BUILD_STATIC OR KICAD_BUILD_DYNAMIC )
     add_dependencies( pcbnew lib-dependencies )
     add_dependencies( eeschema lib-dependencies )
     add_dependencies( cvpcb lib-dependencies )
@@ -695,7 +695,7 @@ if ( KICAD_BUILD_STATIC OR KICAD_BUILD_DYNAMIC )
     add_dependencies( pnsrouter lib-dependencies )
 endif()
 
-if ( KICAD_BUILD_DYNAMIC )
+if( KICAD_BUILD_DYNAMIC )
 endif()
 
 #############

Documentation/development/road-map.md

@@ -615,6 +615,33 @@ Create additional DRC tests for improved error checking.
 **Progress:**
 - Planning
 
+## Segment End Point Snapping. ## {#segment_snapping}
+**Goal:**
+
+It is not uncommon for board edge segment end points to inadvertently not
+be closed causing issues for the 3D viewer and exporting to different file
+formats due the board outline not being a fully enclosed polygon.  This
+feature would add segment end snapping support to allow the board outline
+to be fully enclosed.  This feature would only need to be supported by the
+GAL rendering.
+
+**Tasks**
+- Mark board edge segment ends with a drag indicator to make it visible to the
+  user that the segment end does not have an endpoint with any other board edge
+  segment.
+- Allow the user to smap the unconnected segment end to the nearest segment end
+  point.
+- Automatically connect unconnected segments with and additional segment when
+  opening the 3D viewer or exporting the board to another format.  Warn the
+  user that an addition segment has be added and should be verified.
+
+**Dependencies:**
+- None
+
+**Progress:**
+- Initial discussion.
+
+
 ## Gerber File Attributes ## {#gerber_attributes}
 **Goal:**
 

Doxyfile

@@ -324,22 +324,6 @@ INLINE_SIMPLE_STRUCTS  = NO
 
 TYPEDEF_HIDES_STRUCT   = NO
 
-# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
-# determine which symbols to keep in memory and which to flush to disk.
-# When the cache is full, less often used symbols will be written to disk.
-# For small to medium size projects (<1000 input files) the default value is
-# probably good enough. For larger projects a too small cache size can cause
-# doxygen to be busy swapping symbols to and from disk most of the time
-# causing a significant performance penalty.
-# If the system has enough physical memory increasing the cache will improve the
-# performance by keeping more symbols in memory. Note that the value works on
-# a logarithmic scale so increasing the size by one will roughly double the
-# memory usage. The cache size is given by this formula:
-# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
-# corresponding to a cache size of 2^16 = 65536 symbols.
-
-SYMBOL_CACHE_SIZE      = 4
-
 # Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be
 # set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given
 # their name and scope. Since this can be an expensive process and often the
@@ -1423,18 +1407,6 @@ GENERATE_XML           = NO
 
 XML_OUTPUT             = xml
 
-# The XML_SCHEMA tag can be used to specify an XML schema,
-# which can be used by a validating XML parser to check the
-# syntax of the XML files.
-
-XML_SCHEMA             =
-
-# The XML_DTD tag can be used to specify an XML DTD,
-# which can be used by a validating XML parser to check the
-# syntax of the XML files.
-
-XML_DTD                =
-
 # If the XML_PROGRAMLISTING tag is set to YES Doxygen will
 # dump the program listings (including syntax highlighting
 # and cross-referencing information) to the XML output. Note that

common/draw_frame.cpp

@@ -24,7 +24,7 @@
  */
 
 /**
- * @file drawframe.cpp
+ * @file draw_frame.cpp
  */
 
 #include <fctsys.h>

common/draw_panel.cpp

@@ -24,7 +24,7 @@
  */
 
 /**
- * @file drawpanel.cpp
+ * @file draw_panel.cpp
  */
 
 #include <fctsys.h>

gerbview/printout_control.cpp

@@ -23,7 +23,7 @@
  */
 
 /**
- * @file printout_controller.cpp
+ * @file printout_control.cpp
  * @brief Board print handler implementation file.
  */
 

include/wxEeschemaStruct.h

@@ -268,8 +268,6 @@ public:
      * Function LoadProjectFile
      * loads the KiCad project file (*.pro) settings specific to Eeschema.
      *
-     * @param aFileName The project file name to load.
-     * @param aForceReread Force the project file to be reread if true.
      * @return True if the project file was loaded correctly.
      */
     bool LoadProjectFile();
@@ -643,18 +641,6 @@ public:
      */
     void OnSaveProject( wxCommandEvent& aEvent );
 
-    /**
-     * Function OpenProjectFiles
-     * loads an entire project into the schematic editor.
-     *
-     * This function loads  schematic root file and it's subhierarchies, the project
-     * configuration, and the component libraries which are not already loaded.
-     *
-     * @param aFileSet is a list of one file, the top level schematic.
-     *
-     * @return bool - true if the project loaded properly, else false.
-     */
-    //bool LoadOneEEProject( const wxString& aFileName, bool aIsNew );
     bool OpenProjectFiles( const std::vector<wxString>& aFileSet, int aCtl = 0 );  // virtual from KIWAY_PLAYER
 
     /**
@@ -705,7 +691,7 @@ public:
      * @param aForceVisibilityState = Set to true to change the footprint field visibility
      *                                state to \a aVisibilityState.  False retains the
      *                                current footprint field visibility state.
-     * @param aVisiblityState True to show the footprint field or false to hide the footprint
+     * @param aVisibilityState True to show the footprint field or false to hide the footprint
      *                         field if \a aForceVisibilityState is true.
      * @return bool = true if success.
      */
@@ -1004,16 +990,20 @@ private:
      * if libname != "", search in lib "libname"
      * else search in all loaded libs
      *
+     * @param aDC is the device context to draw upon.
+     * @param aLibName is the library name to load the component from.
      * @param aHistoryList     list remembering recently used component names.
      * @param aHistoryLastUnit remembering last unit in last component.
+     * @param aUseLibBrowser is the flag to determine if the library browser should be launched.
+     * @return a pointer the SCH_COMPONENT object selected or NULL if no component was selected.
      * (TODO(hzeller): This really should be a class doing history, but didn't
      *  want to change too much while other refactoring is going on)
      */
-    SCH_COMPONENT* Load_Component( wxDC*           DC,
-                                   const wxString& libname,
+    SCH_COMPONENT* Load_Component( wxDC*           aDC,
+                                   const wxString& aLibName,
                                    wxArrayString&  aHistoryList,
                                    int&            aHistoryLastUnit,
-                                   bool            UseLibBrowser );
+                                   bool            aUseLibBrowser );
 
     /**
      * Function EditComponent

pcbnew/autorouter/auto_place_footprints.cpp

 /**
- * @file autoplac.cpp
+ * @file auto_place_footprints.cpp
  * @brief Functions to automatically place Footprints on a board.
  */
 

pcbnew/autorouter/move_and_route_event_functions.cpp

@@ -26,7 +26,7 @@
  */
 
 /**
- * @file automove.cpp
+ * @file move_and_route_event_functions.cpp
  * @brief Routines for automatic displacement and rotation of modules.
  */
 

pcbnew/dialogs/dialog_non_copper_zones_properties.cpp

 /**
- * @file zones_non_copper_type_functions.cpp
+ * @file dialog_non_copper_zones_properties.cpp
  */
 /*
  * This program source code file is part of KiCad, a free EDA CAD application.