D_PAD conversion: m_Pos converted

PCB_ITEM: GetPosition -- removed reference
load/save length in config

3d-viewer/3d_draw.cpp

@@ -884,7 +884,7 @@ void EDGE_MODULE::Draw3D( EDA_3D_CANVAS* glcanvas )
     }
 }
 
-
+/** @TODO: move D_PAD method to appropriate file */
 /* Draw 3D pads. */
 void D_PAD::Draw3D( EDA_3D_CANVAS* glcanvas )
 {
@@ -903,8 +903,8 @@ void D_PAD::Draw3D( EDA_3D_CANVAS* glcanvas )
     int     color;
 
     scale = g_Parm_3D_Visu.m_BoardScale;
-    holeX = (double) TO_LEGACY_LU_DBL( m_Drill.x ) * scale / 2;
-    holeY = (double) TO_LEGACY_LU_DBL( m_Drill.y ) * scale / 2;
+    holeX = (double) TO_LEGACY_LU_DBL( m_Drill.x() ) * scale / 2;
+    holeY = (double) TO_LEGACY_LU_DBL( m_Drill.y() ) * scale / 2;
     hole  = MIN( holeX, holeY );
 
     /* Calculate the center of the pad. */
@@ -914,12 +914,12 @@ void D_PAD::Draw3D( EDA_3D_CANVAS* glcanvas )
     xc  = ux0;
     yc  = uy0;
 
-    dx = dx0 = TO_LEGACY_LU( m_Size.x ) >> 1;
-    dy = dy0 = TO_LEGACY_LU( m_Size.y ) >> 1;
+    dx = dx0 = TO_LEGACY_LU( m_Size.x() ) >> 1;
+    dy = dy0 = TO_LEGACY_LU( m_Size.y() ) >> 1;
 
     angle  = m_Orient;
-    drillx = m_Pos.x * scale;
-    drilly = m_Pos.y * scale;
+    drillx = TO_LEGACY_LU( m_Pos.x() ) * scale;
+    drilly = TO_LEGACY_LU( m_Pos.y() ) * scale;
 
     /* Draw the pad hole (TODO: draw OBLONG hole) */
     if( holeX && holeY )
@@ -980,13 +980,13 @@ void D_PAD::Draw3D( EDA_3D_CANVAS* glcanvas )
         {
             delta_cx = dx - dy;
             delta_cy = 0;
-            w = TO_LEGACY_LU( m_Size.y ) * scale;
+            w = TO_LEGACY_LU( m_Size.y() ) * scale;
         }
         else /* Vertical ellipse */
         {
             delta_cx = 0;
             delta_cy = dy - dx;
-            w = TO_LEGACY_LU( m_Size.x ) * scale;
+            w = TO_LEGACY_LU( m_Size.x() ) * scale;
         }
 
         RotatePoint( &delta_cx, &delta_cy, angle );

bitmap2component/bitmap2component.cpp

@@ -37,13 +37,6 @@
 #include "auxiliary.h"
 
 
-#ifndef max
-    #define max( a, b ) ( ( (a) > (b) ) ? (a) : (b) )
-#endif
-#ifndef min
-    #define min( a, b ) ( ( (a) < (b) ) ? (a) : (b) )
-#endif
-
 // Define some types used here from boost::polygon
 namespace bpl = boost::polygon;         // bpl = boost polygon library
 using namespace bpl::operators;         // +, -, =, ...
@@ -476,7 +469,7 @@ void BezierToPolyline( std::vector <potrace_dpoint_t>& aCornersBuffer,
      *  occur at an endpoint. */
     dd0     = sq( p1.x - 2 * p2.x + p3.x ) + sq( p1.y - 2 * p2.y + p3.y );
     dd1     = sq( p2.x - 2 * p3.x + p4.x ) + sq( p2.y - 2 * p3.y + p4.y );
-    dd      = 6 * sqrt( max( dd0, dd1 ) );
+    dd      = 6 * sqrt( fmax( dd0, dd1 ) );
     e2      = 8 * delta <= dd ? 8 * delta / dd : 1;
     epsilon = sqrt( e2 ); /* necessary interval size */
 

common/common.cpp

@@ -418,7 +418,7 @@ int ReturnValueFromString( EDA_UNITS_T aUnit, const wxString& TextValue, int Int
 
 const LENGTH_UNIT_DESC MillimetreDesc =
 {
-    LENGTH_UNITS<LENGTH_DEF>::millimetre(),
+    LENGTH_UNITS<LENGTH_PCB>::millimetre(),
     wxT( "mm" ),
     6
 };
@@ -426,7 +426,7 @@ const LENGTH_UNIT_DESC MillimetreDesc =
 
 const LENGTH_UNIT_DESC InchDesc =
 {
-    LENGTH_UNITS<LENGTH_DEF>::inch(),
+    LENGTH_UNITS<LENGTH_PCB>::inch(),
     wxT( "\"" ),
     7
 };
@@ -434,7 +434,7 @@ const LENGTH_UNIT_DESC InchDesc =
 
 const LENGTH_UNIT_DESC MilDesc =
 {
-    LENGTH_UNITS<LENGTH_DEF>::mil(),
+    LENGTH_UNITS<LENGTH_PCB>::mil(),
     wxT( "mil" ),
     5
 };
@@ -442,7 +442,7 @@ const LENGTH_UNIT_DESC MilDesc =
 
 const LENGTH_UNIT_DESC UnscaledDesc = /* stub */
 {
-    LENGTH_DEF::quantum(),
+    LENGTH_PCB::quantum(),
     wxT( "" ),
     4
 };
@@ -461,7 +461,7 @@ const LENGTH_UNIT_DESC *UnitDescription( EDA_UNITS_T aUnit ) {
 
 
 /* TODO: localisation */
-wxString LengthToString( const LENGTH_UNIT_DESC *aUnit, LENGTH_DEF aValue,
+wxString LengthToString( const LENGTH_UNIT_DESC *aUnit, LENGTH_PCB aValue,
                          bool aAdd_unit_symbol ) {
     wxString StringValue;
     double   value_to_print;
@@ -490,10 +490,10 @@ wxString LengthToString( const LENGTH_UNIT_DESC *aUnit, LENGTH_DEF aValue,
     return StringValue;
 }
 
-LENGTH_DEF StringToLength( const LENGTH_UNIT_DESC *aUnit, const wxString& TextValue )
+LENGTH_PCB StringToLength( const LENGTH_UNIT_DESC *aUnit, const wxString& TextValue )
 {
 
-    LENGTH_DEF    Value;
+    LENGTH_PCB  Value;
     double      dtmp = 0;
 
     /* Acquire the 'right' decimal point separator */
@@ -544,21 +544,21 @@ LENGTH_DEF StringToLength( const LENGTH_UNIT_DESC *aUnit, const wxString& TextVa
         aUnit = &MilDesc;
     }
 
-    Value = LENGTH_DEF( dtmp * LENGTH< double, 1 >( aUnit->m_Value ) );
+    Value = LENGTH_PCB( dtmp * LENGTH< double, 1 >( aUnit->m_Value ) );
 
     return Value;
 }
 
-void LengthToTextCtrl( wxTextCtrl& TextCtr, LENGTH_DEF Value )
+void LengthToTextCtrl( wxTextCtrl& TextCtr, LENGTH_PCB Value )
 {
     wxString msg = LengthToString( UnitDescription( g_UserUnit ), Value );
 
     TextCtr.SetValue( msg );
 }
 
-LENGTH_DEF LengthFromTextCtrl( const wxTextCtrl& TextCtr )
+LENGTH_PCB LengthFromTextCtrl( const wxTextCtrl& TextCtr )
 {
-    LENGTH_DEF value;
+    LENGTH_PCB value;
     wxString msg = TextCtr.GetValue();
 
     value = StringToLength( UnitDescription( g_UserUnit ), msg );

common/projet_config.cpp

@@ -802,3 +802,85 @@ void PARAM_CFG_LIBNAME_LIST::SaveParam( wxConfigBase* aConfig )
         aConfig->Write( configkey, libname );
     }
 }
+
+/*
+ * LENGTH_PCB
+ */
+
+PARAM_CFG_LENGTH_PCB::PARAM_CFG_LENGTH_PCB( const wxChar* ident,
+                                            LENGTH_PCB*   ptparam,
+                                            LENGTH_PCB    default_val,
+                                            LENGTH_PCB    min,
+                                            LENGTH_PCB    max,
+                                            const wxChar* group ) :
+    PARAM_CFG_BASE( ident, PARAM_DOUBLE, group )
+{
+    m_Pt_param = ptparam;
+    m_Default  = default_val;
+    m_Min = min;
+    m_Max = max;
+}
+
+
+PARAM_CFG_LENGTH_PCB::PARAM_CFG_LENGTH_PCB( bool          Insetup,
+                                            const wxChar* ident,
+                                            LENGTH_PCB*   ptparam,
+                                            LENGTH_PCB    default_val,
+                                            LENGTH_PCB    min,
+                                            LENGTH_PCB    max,
+                                            const wxChar* group ) :
+    PARAM_CFG_BASE( ident, PARAM_DOUBLE, group )
+{
+    m_Pt_param = ptparam;
+    m_Default  = default_val;
+    m_Min   = min;
+    m_Max   = max;
+    m_Setup = Insetup;
+}
+
+
+/** ReadParam
+ * read the value of parameter this stored in aConfig
+ * @param aConfig = the wxConfigBase that store the parameter
+ */
+void PARAM_CFG_LENGTH_PCB::ReadParam( wxConfigBase* aConfig )
+{
+    if( m_Pt_param == NULL || aConfig == NULL )
+        return;
+
+    LENGTH_PCB ftmp;
+    wxString msg;
+    msg = aConfig->Read( m_Ident, wxT( "" ) );
+
+    if( msg.IsEmpty() )
+    {
+        ftmp = m_Default;
+    }
+    else
+    {
+        double t;
+        msg.ToDouble( &t );
+        ftmp = FROM_LEGACY_LU( t );
+
+        if( (ftmp < m_Min) || (ftmp > m_Max) )
+            ftmp = m_Default;
+    }
+
+    *m_Pt_param = ftmp;
+}
+
+
+/** SaveParam
+ * save the the value of parameter this stored in aConfig
+ * @param aConfig = the wxConfigBase that can store the parameter
+ */
+void PARAM_CFG_LENGTH_PCB::SaveParam( wxConfigBase* aConfig )
+{
+    if( m_Pt_param == NULL || aConfig == NULL )
+        return;
+#ifdef KICAD_NANOMETRE
+    aConfig->Write( m_Ident, TO_LEGACY_LU_DBL( *m_Pt_param ) );
+#else // save it as int to mantain compatibility while in transition to nanoscale
+    aConfig->Write( m_Ident, TO_LEGACY_LU( *m_Pt_param ) );
+#endif
+}

gerbview/class_gerber_draw_item.h

@@ -167,7 +167,7 @@ public:
      * @return const wxPoint& - The position of this object.
      * This function exists mainly to satisfy the virtual GetPosition() in parent class
      */
-    wxPoint& GetPosition()
+    wxPoint GetPosition() const
     {
         return m_Start;  // it had to be start or end.
     }

include/class_board_item.h

@@ -76,9 +76,13 @@ public:
     /**
      * Function GetPosition
      * returns the position of this object.
-     * @return wxPoint& - The position of this object, non-const so it can be changed
+     * @return wxPoint - The position of this object
+     * It seems this function could not return modifiable reference as this
+     * contradict good design practice: as the class could be able
+     * doing internal recalculations on reposition.
+     * @TODO: Check all the GetPosition calls for position assignments.
      */
-    virtual wxPoint& GetPosition() = 0;
+    virtual wxPoint GetPosition() const = 0;
 
     /**
      * Function GetLayer
@@ -313,10 +317,9 @@ public:
     {}
 
     //-----< satisfy some virtual functions >------------------------------
-    wxPoint& GetPosition()
+    wxPoint GetPosition() const
     {
-        static wxPoint dummy;
-        return dummy;
+        return wxPoint(0, 0);
     }
 
     void Draw( EDA_DRAW_PANEL* DrawPanel, wxDC* DC,

include/common.h

@@ -37,7 +37,7 @@
 
 
 #ifdef KICAD_NANOMETRE
-#include "length.h"
+#include "lengthpcb.h"
 #endif
 
 class wxAboutDialogInfo;
@@ -385,7 +385,7 @@ int ReturnValueFromTextCtrl( const wxTextCtrl& TextCtr, int Internal_Unit );
 
 struct LENGTH_UNIT_DESC
 {
-    LENGTH_DEF     m_Value;
+    LENGTH_PCB       m_Value;
     const wxString   m_Symbol;
     int              m_Precision;
 };
@@ -394,12 +394,12 @@ extern const LENGTH_UNIT_DESC MillimetreDesc, InchDesc, MilDesc;
 
 const LENGTH_UNIT_DESC *UnitDescription( EDA_UNITS_T aUnit );
 
-LENGTH_DEF       StringToLength( const LENGTH_UNIT_DESC *aUnit, const wxString& TextValue );
-wxString         LengthToString( const LENGTH_UNIT_DESC *aUnit, LENGTH_DEF aValue,
+LENGTH_PCB       StringToLength( const LENGTH_UNIT_DESC *aUnit, const wxString& TextValue );
+wxString         LengthToString( const LENGTH_UNIT_DESC *aUnit, LENGTH_PCB aValue,
                                  bool aAdd_unit_symbol = false );
 
-void             LengthToTextCtrl( wxTextCtrl& TextCtr, LENGTH_DEF Value );
-LENGTH_DEF       LengthFromTextCtrl( const wxTextCtrl& TextCtr );
+void             LengthToTextCtrl( wxTextCtrl& TextCtr, LENGTH_PCB Value );
+LENGTH_PCB       LengthFromTextCtrl( const wxTextCtrl& TextCtr );
 
 /* transition macros */
 #define STR_TO_LENGTH( unit, str, iu ) \

include/lengthpcb.h

@@ -8,6 +8,7 @@
 
 #ifdef KICAD_NANOMETRE
 #include "length.h"
+#include "limited_int.h"
 
 /* switched type! */
 typedef LENGTH< LIMITED_INT< int >, 1 > LENGTH_PCB;
@@ -43,7 +44,6 @@ static LENGTH_PCB_DBL from_legacy_lu_dbl( double x ) {
 
 #define ZERO_LENGTH ( LENGTH_PCB::zero() )
 
-
 /* SAVE FILE macros */
 #define FM_LENSV "%lf" ///< format specifier for saving
 #define ARG_LENSV( x ) TO_LEGACY_LU_DBL( x ) ///< argument for saving
@@ -63,6 +63,7 @@ typedef double LENGTH_PCB_DBL;
 
 #define ZERO_LENGTH 0
 
+
 /* SAVE FILE macros */
 /** @TODO: after transition process this could be wrapped in some class */
 #define FM_LENSV "%d"
@@ -70,6 +71,7 @@ typedef double LENGTH_PCB_DBL;
 
 #endif
 
+
 /* LOAD FILE macros */
 #define FM_LENLD "%lf" ///< scanf format macro for loading
 #define ARG_LENLD_TYPE double ///< tmp variable for length read
@@ -80,55 +82,7 @@ typedef double LENGTH_PCB_DBL;
 #define LENGTH_LOAD_TMP( x ) ( FROM_LEGACY_LU( x ) ) ///< reads tmp value from above
 #define LENGTH_LOAD_STR( s ) ( FROM_LEGACY_LU( atof( s ) ) ) ///< reads string
 
-
-/// @TODO: nice template and refiling for it
-struct VECTOR_PCB
-{
-    LENGTH_PCB x, y;
-    VECTOR_PCB()
-    {
-    }
-    VECTOR_PCB( LENGTH_PCB ax, LENGTH_PCB ay ): x( ax ), y( ay )
-    {
-    }
-    bool operator == ( const VECTOR_PCB &a ) const {
-        return x == a.x && y == a.y;
-    }
-    bool operator != ( const VECTOR_PCB &a ) const {
-        return x != a.x || y != a.y;
-    }
-    VECTOR_PCB & operator = (const VECTOR_PCB &a ) {
-        x = a.x;
-        y = a.y;
-        return *this;
-    }
-    VECTOR_PCB & operator += (const VECTOR_PCB &a ) {
-        x += a.x;
-        y += a.y;
-        return *this;
-    }
-    VECTOR_PCB & operator -= (const VECTOR_PCB &a ) {
-        x -= a.x;
-        y -= a.y;
-        return *this;
-    }
-    VECTOR_PCB operator + (VECTOR_PCB add) const {
-        return VECTOR_PCB(x + add.x, y + add.y);
-    }
-    VECTOR_PCB operator - (VECTOR_PCB add) const {
-        return VECTOR_PCB(x - add.x, y - add.y);
-    }
-    VECTOR_PCB operator * (int factor) const {
-        return VECTOR_PCB(x * factor, y * factor);
-    }
-    VECTOR_PCB operator / (int factor) const {
-        return VECTOR_PCB(x / factor, y / factor);
-    }
-};
-
-#define TO_LEGACY_LU_WXP( p ) ( wxPoint( TO_LEGACY_LU( ( p ).x ), TO_LEGACY_LU( ( p ).y ) ) )
-#define TO_LEGACY_LU_WXS( p ) ( wxSize( TO_LEGACY_LU( ( p ).x ), TO_LEGACY_LU( ( p ).y ) ) )
-#define FROM_LEGACY_LU_VEC( p ) ( VECTOR_PCB( FROM_LEGACY_LU( ( p ).x ), FROM_LEGACY_LU( ( p ).y ) ) )
-
+/* used fo loading/saving config */
+#define LENGTH_MAX_CONFIG ( FROM_LEGACY_LU( 393700 ) )
 
 #endif /* def LENGTHPCB_H_INCLUDED */

include/limited_int.h

@@ -15,21 +15,25 @@
 template < typename T = int > class LIMITED_INT {
 private:
     T m_Value;
+    
 public:
     LIMITED_INT( void ) : m_Value() {
     }
+    
     template<typename V> LIMITED_INT( const LIMITED_INT< V >& orig )
     :  m_Value( orig.m_Value )
     {
         assert(std::numeric_limits<T>::min() <= orig.m_Value);
         assert(orig.m_Value <= std::numeric_limits<T>::max());
     }
+    
     template<typename V> LIMITED_INT( const double v )
     :  m_Value( floor(v+0.5) )
     {
         assert(std::numeric_limits<T>::min() <= v);
         assert(v <= std::numeric_limits<T>::max());
     }
+    
     LIMITED_INT( T v ): m_Value( v )
     {
     }
@@ -38,6 +42,7 @@ public:
     {
         return m_Value;
     }
+    
     operator double( void ) const
     {
         return ( double )m_Value;
@@ -48,11 +53,13 @@ public:
         m_Value = src.m_Value;
         return *this;
     }
+    
     LIMITED_INT<T> & operator = ( T src )
     {
         m_Value = src;
         return *this;
     }
+    
     /*************************/
     /* comparisons and tests */
     /*************************/
@@ -64,10 +71,12 @@ public:
     {
         return m_Value == y.m_Value;
     }
+    
     bool operator == ( const T y ) const
     {
         return m_Value == y;
     }
+    
     friend bool operator == ( const T x, const LIMITED_INT< T > &y )
     {
         return x == y.m_Value;
@@ -77,10 +86,12 @@ public:
     {
         return m_Value != y.m_Value;
     }
+    
     bool operator != ( const T y ) const
     {
         return m_Value != y;
     }
+    
     friend bool operator != ( const T x, const LIMITED_INT< T > &y )
     {
         return x != y.m_Value;
@@ -90,10 +101,12 @@ public:
     {
         return m_Value < y.m_Value;
     }
+    
     bool operator < ( const T y ) const
     {
         return m_Value < y;
     }
+    
     friend bool operator < ( const T x, const LIMITED_INT< T > &y )
     {
         return x < y.m_Value;
@@ -103,10 +116,12 @@ public:
     {
         return m_Value >= y.m_Value;
     }
+    
     bool operator >= ( const T y ) const
     {
         return m_Value >= y;
     }
+    
     friend bool operator >= ( const T x, const LIMITED_INT<T> &y )
     {
         return x >= y.m_Value;
@@ -116,10 +131,12 @@ public:
     {
         return m_Value > y.m_Value;
     }
+    
     bool operator > ( const T y ) const
     {
         return m_Value > y;
     }
+    
     friend bool operator > ( const T x, const LIMITED_INT< T > &y )
     {
         return x > y.m_Value;
@@ -129,10 +146,12 @@ public:
     {
         return m_Value <= y.m_Value;
     }
+    
     bool operator <= ( const T y ) const
     {
         return m_Value <= y;
     }
+    
     friend bool operator <= ( const T x, const LIMITED_INT< T > &y )
     {
         return x <= y.m_Value;
@@ -147,18 +166,22 @@ public:
         assert( !( m_Value < 0 ) || std::numeric_limits< T >::min() - m_Value <= y.m_Value );
         return m_Value + y.m_Value;
     }
+    
     LIMITED_INT< T > operator + ( const T y ) const
     {
         return *this + LIMITED_INT< T >( y );
     }
+    
     friend LIMITED_INT< T > operator + ( const T x, const LIMITED_INT< T > &y )
     {
         return LIMITED_INT< T >( x ) + y;
     }
+    
     double operator + ( const double y ) const
     {
         return double( m_Value ) + y;
     }
+    
     friend double operator + ( const double x, const LIMITED_INT< T > &y )
     {
         return x + double( y.m_Value );
@@ -169,24 +192,29 @@ public:
         assert( -std::numeric_limits< T >::max() <= m_Value );
         return -m_Value;
     }
+    
     LIMITED_INT< T > operator - ( const LIMITED_INT< T > &y ) const
     {
         assert( !( 0 < m_Value ) || m_Value - std::numeric_limits< T >::max() <= y.m_Value );
         assert( !( m_Value < 0 ) || y.m_Value <= m_Value - std::numeric_limits< T >::min() );
         return m_Value - y.m_Value;
     }
+    
     LIMITED_INT< T > operator - ( const T y ) const
     {
         return *this - LIMITED_INT< T >( y );
     }
+    
     friend LIMITED_INT< T > operator - ( const T x, const LIMITED_INT< T > &y )
     {
         return LIMITED_INT< T >( x ) - y;
     }
+    
     double operator - ( const double y ) const
     {
         return double( m_Value ) - y;
     }
+    
     friend double operator - ( const double x, const LIMITED_INT< T > &y )
     {
         return x - double( y.m_Value );
@@ -204,18 +232,22 @@ public:
         || std::numeric_limits<T>::max() / m_Value <= y.m_Value );
         return m_Value * y.m_Value;
     }
+    
     LIMITED_INT<T> operator * ( const T y) const
     {
         return *this * LIMITED_INT< T >( y );
     }
+    
     friend LIMITED_INT< T > operator *( const T x, const LIMITED_INT< T > &y )
     {
         return LIMITED_INT< T >( x ) * y;
     }
+    
     double operator * ( const double y ) const
     {
         return double( m_Value ) * y;
     }
+    
     friend double operator * ( const double x, const LIMITED_INT< T > &y )
     {
         return x * double( y.m_Value );
@@ -227,18 +259,22 @@ public:
         || -std::numeric_limits< T >::max() <= m_Value );
         return m_Value / y.m_Value;
     }
+    
     LIMITED_INT<T> operator / ( const T y ) const
     {
         return *this / LIMITED_INT<T>(y);
     }
+    
     friend LIMITED_INT< T > operator / ( const T x, const LIMITED_INT< T > &y )
     {
         return LIMITED_INT< T >( x ) / y;
     }
+    
     double operator / ( const double y ) const
     {
         return double( m_Value ) / y;
     }
+    
     friend double operator / ( const double x, const LIMITED_INT< T > &y )
     {
         return x / double( y.m_Value );
@@ -248,62 +284,71 @@ public:
     {
         return m_Value % y.m_Value;
     }
+    
     LIMITED_INT<T> operator % ( const T y ) const
     {
         return *this % LIMITED_INT<T>(y);
     }
+    
     friend LIMITED_INT< T > operator % ( const T x, const LIMITED_INT< T > &y )
     {
         return LIMITED_INT< T >( x ) % y;
     }
-    /*************************/
-    /* assignment arithmetic */
-    /*************************/
+    
     LIMITED_INT< T >& operator += ( const LIMITED_INT< T > &y )
     {
         *this = *this + y;
         return *this;
     }
+    
     LIMITED_INT< T >& operator += ( const T y )
     {
         *this = *this + y;
         return *this;
     }
+    
     LIMITED_INT< T >& operator ++ ( void )
     {
         *this = *this + 1;
         return *this;
     }
+    
     LIMITED_INT< T >& operator -= ( const LIMITED_INT< T > &y )
     {
         *this = *this - y;
         return *this;
     }
+    
     LIMITED_INT< T >& operator -= ( const T y )
     {
         *this = *this - y;
         return *this;
     }
+    
     LIMITED_INT< T >& operator -- ( void )
     {
         *this = *this - 1;
         return *this;
     }
+    
     LIMITED_INT< T >& operator *= ( const LIMITED_INT< T > &y )
     {
         *this = *this * y;
         return *this;
     }
+    
     LIMITED_INT< T >& operator *= ( const T y )
     {
         *this = *this * y;
         return *this;
     }
+    
     LIMITED_INT< T >& operator /= ( const LIMITED_INT< T > &y )
     {
         *this = *this / y;
         return *this;
     }
+    
     LIMITED_INT< T >& operator /= ( const T y )
     {
         *this = *this / y;

include/param_config.h

@@ -10,6 +10,7 @@
 #include "wx/fileconf.h"
 #include <boost/ptr_container/ptr_vector.hpp>
 
+#include "lengthpcb.h"
 
 /** Type of parameter in the configuration file */
 enum paramcfg_id {
@@ -85,6 +86,35 @@ public: PARAM_CFG_INT( const wxChar* ident, int* ptparam,
     virtual void SaveParam( wxConfigBase* aConfig );
 };
 
+/**
+ * Configuration parameter - Length PCB Class
+ *
+ */
+class PARAM_CFG_LENGTH_PCB      : public PARAM_CFG_BASE
+{
+public:
+    LENGTH_PCB * m_Pt_param;    ///<  Pointer to the parameter value
+    LENGTH_PCB   m_Min, m_Max;  ///<  Minimum and maximum values of the param type
+    LENGTH_PCB   m_Default;     ///<  The default value of the parameter
+
+public:
+    PARAM_CFG_LENGTH_PCB( const wxChar* ident, /// @TODO: remove hardcoded constants
+                          LENGTH_PCB* ptparam,
+                          LENGTH_PCB default_val = ZERO_LENGTH,
+                          LENGTH_PCB min = -LENGTH_MAX_CONFIG,
+                          LENGTH_PCB max =  LENGTH_MAX_CONFIG,
+                          const wxChar* group = NULL );
+    PARAM_CFG_LENGTH_PCB( bool Insetup,
+                          const wxChar* ident,
+                          LENGTH_PCB* ptparam,
+                          LENGTH_PCB default_val = ZERO_LENGTH,
+                          LENGTH_PCB min = -LENGTH_MAX_CONFIG,
+                          LENGTH_PCB max =  LENGTH_MAX_CONFIG,
+                          const wxChar* group = NULL );
+
+    virtual void ReadParam( wxConfigBase* aConfig );
+    virtual void SaveParam( wxConfigBase* aConfig );
+};
 
 /**
  * Configuration parameter - SetColor Class

include/vectorpcb.h

+/**
+ * @file vectorpcb.h
+ * @brief Planar vector definitions for PCBNEW.
+ */
+
+#ifndef VECTORPCB_H_INCLUDED
+#define VECTORPCB_H_INCLUDED 1
+
+/// @TODO: nice template and refiling for it
+class VECTOR_PCB
+{
+public:
+    LENGTH_PCB data[2];
+
+    /** A vector from pair of coords. Constructor is avoided in favor to POD-like object.
+     */
+    static VECTOR_PCB fromXY( LENGTH_PCB x, LENGTH_PCB y )
+    {
+        VECTOR_PCB z = { { x, y } };
+        return z;
+    }
+
+    LENGTH_PCB &operator[]( int i )
+    {
+        return data[i];
+    }
+
+    const LENGTH_PCB &operator[]( int i ) const
+    {
+        return data[i];
+    }
+
+    LENGTH_PCB & x()
+    {
+        return data[0];
+    }
+
+    const LENGTH_PCB & x() const
+    {
+        return data[0];
+    }
+
+    LENGTH_PCB & y()
+    {
+        return data[1];
+    }
+
+    const LENGTH_PCB & y() const
+    {
+        return data[1];
+    }
+
+    //LENGTH_PCB x, y;
+    bool operator == ( const VECTOR_PCB &b ) const
+    {
+        return data[0] == b.data[0] && data[1] == b.data[1];
+    }
+
+    bool operator != ( const VECTOR_PCB &b ) const
+    {
+        return !(*this == b);
+    }
+
+    VECTOR_PCB & operator -= ( const VECTOR_PCB &b )
+    {
+        data[0] -= b.data[0];
+        data[1] -= b.data[1];
+        return *this;
+    }
+
+    VECTOR_PCB operator - ( const VECTOR_PCB &b ) const
+    {
+        VECTOR_PCB z = *this;
+        z -= b;
+        return z;
+    }
+
+    VECTOR_PCB & operator += ( const VECTOR_PCB &b )
+    {
+        data[0] += b.data[0];
+        data[1] += b.data[1];
+        return *this;
+    }
+
+    VECTOR_PCB operator + ( VECTOR_PCB b ) const
+    {
+        VECTOR_PCB z = *this;
+        z += b;
+        return z;
+    }
+
+    VECTOR_PCB & operator *= ( int b )
+    {
+        data[0] *= b;
+        data[1] *= b;
+        return *this;
+    }
+
+    VECTOR_PCB operator * ( int b ) const
+    {
+        VECTOR_PCB z = *this;
+        z *= b;
+        return z;
+    }
+
+    VECTOR_PCB & operator /= ( int b )
+    {
+        data[0] /= b;
+        data[1] /= b;
+        return *this;
+    }
+
+    VECTOR_PCB operator / ( int b ) const
+    {
+        VECTOR_PCB z = *this;
+        z /= b;
+        return z;
+    }
+};
+
+#define TO_LEGACY_LU_WXP( p ) ( wxPoint( \
+    TO_LEGACY_LU( ( p )[0] ), \
+    TO_LEGACY_LU( ( p )[1] ) ) )
+#define TO_LEGACY_LU_WXS( p ) ( wxSize( \
+    TO_LEGACY_LU( ( p )[0] ), \
+    TO_LEGACY_LU( ( p )[1] ) ) )
+#define FROM_LEGACY_LU_VEC( p ) ( VECTOR_PCB::fromXY( \
+    FROM_LEGACY_LU( ( p ).x ), \
+    FROM_LEGACY_LU( ( p ).y ) ) )
+
+#endif /* def VECTORPCB_H_INCLUDED */

pcbnew/block_module_editor.cpp

@@ -550,9 +550,9 @@ void MirrorMarkedItems( MODULE* module, wxPoint offset )
             continue;
 
         SETMIRROR( pad->GetPosition().x );
-        pad->m_Pos0.x = FROM_LEGACY_LU( pad->GetPosition().x );
-        NEGATE( pad->m_Offset.x );
-        NEGATE( pad->m_DeltaSize.x );
+        pad->m_Pos0.x() = FROM_LEGACY_LU( pad->GetPosition().x );
+        NEGATE( pad->m_Offset.x() );
+        NEGATE( pad->m_DeltaSize.x() );
         pad->m_Orient      = 1800 - pad->m_Orient;
         NORMALIZE_ANGLE_POS( pad->m_Orient );
     }
@@ -608,8 +608,9 @@ void RotateMarkedItems( MODULE* module, wxPoint offset )
     {
         if( pad->m_Selected == 0 )
             continue;
-
-        ROTATE( pad->GetPosition() );
+        wxPoint pos = pad->GetPosition();
+        ROTATE( pos );
+        pad->SetPosition( pos );
         pad->m_Pos0    = FROM_LEGACY_LU_VEC( pad->GetPosition() );
         pad->m_Orient += 900;
         NORMALIZE_ANGLE_POS( pad->m_Orient );
@@ -632,7 +633,11 @@ void RotateMarkedItems( MODULE* module, wxPoint offset )
             break;
 
         case PCB_MODULE_TEXT_T:
-            ROTATE( ( (TEXTE_MODULE*) item )->GetPosition() );
+            {
+                wxPoint pos = ( (TEXTE_MODULE*) item )->m_Pos;
+                ROTATE( pos );
+                ( (TEXTE_MODULE*) item )->m_Pos = pos;
+            }
             ( (TEXTE_MODULE*) item )->m_Pos0 = ( (TEXTE_MODULE*) item )->GetPosition();
             ( (TEXTE_MODULE*) item )->m_Orient += 900;
             break;

pcbnew/board_items_to_polygon_shape_transform.cpp

@@ -328,8 +328,8 @@ void D_PAD:: TransformShapeWithClearanceToPolygon( std:: vector < CPolyPt>& aCor
 {
     wxPoint corner_position;
     int     ii, angle;
-    int     dx = TO_LEGACY_LU( m_Size.x / 2 ) + aClearanceValue;
-    int     dy = TO_LEGACY_LU( m_Size.y / 2 ) + aClearanceValue;
+    int     dx = TO_LEGACY_LU( m_Size.x() / 2 ) + aClearanceValue;
+    int     dy = TO_LEGACY_LU( m_Size.y() / 2 ) + aClearanceValue;
 
     int     delta = 3600 / aCircleToSegmentsCount;  // rot angle in 0.1 degree
     wxPoint PadShapePos = ReturnShapePos();         /* Note: for pad having a shape offset,
@@ -437,8 +437,8 @@ void D_PAD:: TransformShapeWithClearanceToPolygon( std:: vector < CPolyPt>& aCor
 
     default:
     case PAD_TRAPEZOID:
-        psize.x += TO_LEGACY_LU( ABS( m_DeltaSize.y ) );
-        psize.y += TO_LEGACY_LU( ABS( m_DeltaSize.x ) );
+        psize.x += TO_LEGACY_LU( abs( m_DeltaSize.y() ) );
+        psize.y += TO_LEGACY_LU( abs( m_DeltaSize.x() ) );
 
     // fall through
     case PAD_RECT:
@@ -572,8 +572,8 @@ void    CreateThermalReliefPadPolygon( std::vector<CPolyPt>& aCornerBuffer,
     wxPoint PadShapePos = aPad.ReturnShapePos();    /* Note: for pad having a shape offset,
                                                      * the pad position is NOT the shape position */
     wxSize  copper_thickness;
-    int     dx = TO_LEGACY_LU( aPad.m_Size.x / 2 );
-    int     dy = TO_LEGACY_LU( aPad.m_Size.y / 2 );
+    int     dx = TO_LEGACY_LU( aPad.m_Size.x() / 2 );
+    int     dy = TO_LEGACY_LU( aPad.m_Size.y() / 2 );
 
     int     delta = 3600 / aCircleToSegmentsCount; // rot angle in 0.1 degree
 
@@ -684,8 +684,8 @@ void    CreateThermalReliefPadPolygon( std::vector<CPolyPt>& aCornerBuffer,
         // Oval pad support along the lines of round and rectangular pads
         std::vector <wxPoint> corners_buffer;               // Polygon buffer as vector
 
-        int     dx = TO_LEGACY_LU( aPad.m_Size.x / 2 ) + aThermalGap;     // Cutout radius x
-        int     dy = TO_LEGACY_LU( aPad.m_Size.y / 2 ) + aThermalGap;     // Cutout radius y
+        int     dx = TO_LEGACY_LU( aPad.m_Size.x() / 2 ) + aThermalGap;     // Cutout radius x
+        int     dy = TO_LEGACY_LU( aPad.m_Size.y() / 2 ) + aThermalGap;     // Cutout radius y
 
         wxPoint shape_offset;
 
@@ -839,8 +839,8 @@ void    CreateThermalReliefPadPolygon( std::vector<CPolyPt>& aCornerBuffer,
 
         std::vector <wxPoint> corners_buffer;               // Polygon buffer as vector
 
-        int dx = TO_LEGACY_LU( aPad.m_Size.x / 2 ) + aThermalGap;         // Cutout radius x
-        int dy = TO_LEGACY_LU( aPad.m_Size.y / 2 ) + aThermalGap;         // Cutout radius y
+        int dx = TO_LEGACY_LU( aPad.m_Size.x() / 2 ) + aThermalGap;         // Cutout radius x
+        int dy = TO_LEGACY_LU( aPad.m_Size.y() / 2 ) + aThermalGap;         // Cutout radius y
 
         // The first point of polygon buffer is left lower corner, second the crosspoint of
         // thermal spoke sides, the third is upper right corner and the rest are rounding

pcbnew/class_board.cpp

@@ -647,11 +647,9 @@ bool BOARD::IsModuleLayerVisible( int layer )
 
 
 
-wxPoint& BOARD::GetPosition()
+wxPoint BOARD::GetPosition() const
 {
-    static wxPoint dummy( 0, 0 );
-
-    return dummy;   // a reference
+    return wxPoint ( 0, 0 );   // a reference
 }
 
 
@@ -1668,7 +1666,7 @@ D_PAD* BOARD::GetPadFast( const wxPoint& aPosition, int aLayerMask )
     {
         D_PAD* pad = m_NetInfo->GetPad(i);
 
-        if( pad->m_Pos != aPosition )
+        if( TO_LEGACY_LU_WXP( pad->m_Pos ) != aPosition )
             continue;
 
         /* Pad found, it must be on the correct layer */
@@ -1699,7 +1697,7 @@ D_PAD* BOARD::GetPad( std::vector<D_PAD*>& aPadList, const wxPoint& aPosition, i
 
         D_PAD* pad = aPadList[idx];
 
-        if( pad->m_Pos == aPosition )       // candidate found
+        if( TO_LEGACY_LU_WXP( pad->m_Pos ) == aPosition )       // candidate found
         {
             // The pad must match the layer mask:
             if( (aLayerMask & pad->m_layerMask) != 0 )
@@ -1712,7 +1710,7 @@ D_PAD* BOARD::GetPad( std::vector<D_PAD*>& aPadList, const wxPoint& aPosition, i
             for( int ii = idx+1; ii <= idxmax; ii++ )
             {
                 pad = aPadList[ii];
-                if( pad->m_Pos != aPosition )
+                if( TO_LEGACY_LU_WXP( pad->m_Pos ) != aPosition )
                     break;
                 if( (aLayerMask & pad->m_layerMask) != 0 )
                     return pad;
@@ -1721,7 +1719,7 @@ D_PAD* BOARD::GetPad( std::vector<D_PAD*>& aPadList, const wxPoint& aPosition, i
             for(  int ii = idx-1 ;ii >=0; ii-- )
             {
                 pad = aPadList[ii];
-                if( pad->m_Pos != aPosition )
+                if( TO_LEGACY_LU_WXP( pad->m_Pos ) != aPosition )
                     break;
                 if( (aLayerMask & pad->m_layerMask) != 0 )
                     return pad;
@@ -1731,9 +1729,9 @@ D_PAD* BOARD::GetPad( std::vector<D_PAD*>& aPadList, const wxPoint& aPosition, i
             return 0;
         }
 
-        if( pad->m_Pos.x == aPosition.x )   // Must search considering Y coordinate
+        if( TO_LEGACY_LU( pad->m_Pos.x() ) == aPosition.x )   // Must search considering Y coordinate
         {
-            if(pad->m_Pos.y < aPosition.y)  // Must search after this item
+            if( TO_LEGACY_LU( pad->m_Pos.y() ) < aPosition.y )  // Must search after this item
             {
                 idx += delta;
                 if( idx > idxmax )
@@ -1746,7 +1744,7 @@ D_PAD* BOARD::GetPad( std::vector<D_PAD*>& aPadList, const wxPoint& aPosition, i
                     idx = 0;
             }
         }
-        else if( pad->m_Pos.x < aPosition.x ) // Must search after this item
+        else if( TO_LEGACY_LU( pad->m_Pos.x() ) < aPosition.x ) // Must search after this item
         {
             idx += delta;
             if( idx > idxmax )
@@ -1770,9 +1768,9 @@ D_PAD* BOARD::GetPad( std::vector<D_PAD*>& aPadList, const wxPoint& aPosition, i
  */
 static bool sortPadsByXthenYCoord( D_PAD* const & ref, D_PAD* const & comp )
 {
-    if( ref->m_Pos.x == comp->m_Pos.x )
-        return ref->m_Pos.y < comp->m_Pos.y;
-    return ref->m_Pos.x < comp->m_Pos.x;
+    if( ref->m_Pos.x() == comp->m_Pos.x() )
+        return ref->m_Pos.y() < comp->m_Pos.y();
+    return ref->m_Pos.x() < comp->m_Pos.x();
 }
 
 

pcbnew/class_board.h

@@ -226,7 +226,7 @@ public:
      * is a dummy.
      * @return const wxPoint& of (0,0)
      */
-    wxPoint& GetPosition();
+    wxPoint GetPosition() const;
 
     /**
      * Function Add

pcbnew/class_dimension.h

@@ -37,7 +37,7 @@ public:
     DIMENSION( BOARD_ITEM* aParent );
     ~DIMENSION();
 
-    wxPoint& GetPosition()
+    wxPoint GetPosition() const
     {
         return m_Pos;
     }

pcbnew/class_drawsegment.h

@@ -46,7 +46,7 @@ public:
      * Required by pure virtual BOARD_ITEM::GetPosition()
      * @return const wxPoint& - The position of this object.
      */
-    wxPoint& GetPosition()
+    wxPoint GetPosition() const
     {
         return m_Start;
     }

pcbnew/class_marker_pcb.h

@@ -81,7 +81,7 @@ public:
      * Function GetPosition
      * returns the position of this MARKER_PCB.
      */
-    wxPoint& GetPosition()
+    wxPoint GetPosition() const
     {
         return (wxPoint&) m_Pos;
     }

pcbnew/class_mire.h

@@ -30,7 +30,7 @@ public:
     PCB_TARGET* Next() const { return (PCB_TARGET*) Pnext; }
     PCB_TARGET* Back() const { return (PCB_TARGET*) Pnext; }
 
-    wxPoint& GetPosition()
+    wxPoint GetPosition() const
     {
         return m_Pos;
     }

pcbnew/class_module.cpp

@@ -534,9 +534,11 @@ int MODULE::ReadDescr( LINE_READER* aReader )
             {
                 D_PAD* pad = new D_PAD( this );
                 pad->ReadDescr( aReader );
-                RotatePoint( &pad->m_Pos, m_Orient );
-                pad->m_Pos.x += m_Pos.x;
-                pad->m_Pos.y += m_Pos.y;
+                wxPoint pos = TO_LEGACY_LU_WXP( pad->m_Pos );
+                RotatePoint( &pos, m_Orient );
+                pad->m_Pos = FROM_LEGACY_LU_VEC( pos );
+                pad->m_Pos.x() += FROM_LEGACY_LU( m_Pos.x );
+                pad->m_Pos.y() += FROM_LEGACY_LU( m_Pos.y );
 
                 m_Pads.PushBack( pad );
                 continue;

pcbnew/class_module.h

@@ -135,9 +135,9 @@ public:
      * Function GetPosition
      * returns the position of this object.
      * Required by pure virtual BOARD_ITEM::GetPosition()
-     * @return const wxPoint& - The position of this object.
+     * @return const wxPoint - The position of this object.
      */
-    wxPoint& GetPosition()
+    wxPoint GetPosition() const
     {
         return m_Pos;
     }

pcbnew/class_module_transform_functions.cpp

@@ -183,12 +183,12 @@ void MODULE::Flip(const wxPoint& aCentre )
 
     for( ; pt_pad != NULL; pt_pad = pt_pad->Next() )
     {
-        pt_pad->m_Pos.y      -= m_Pos.y;
-        pt_pad->m_Pos.y       = -pt_pad->m_Pos.y;
-        pt_pad->m_Pos.y      += m_Pos.y;
-        NEGATE( pt_pad->m_Pos0.y );
-        NEGATE( pt_pad->m_Offset.y );
-        NEGATE( pt_pad->m_DeltaSize.y );
+        pt_pad->m_Pos.y()      -= FROM_LEGACY_LU( m_Pos.y );
+        pt_pad->m_Pos.y()       = -pt_pad->m_Pos.y();
+        pt_pad->m_Pos.y()      += FROM_LEGACY_LU( m_Pos.y );
+        NEGATE( pt_pad->m_Pos0.y() );
+        NEGATE( pt_pad->m_Offset.y() );
+        NEGATE( pt_pad->m_DeltaSize.y() );
         NEGATE_AND_NORMALIZE_ANGLE_POS( pt_pad->m_Orient );
 
         /* flip pads layers*/
@@ -308,7 +308,7 @@ void MODULE::SetPosition( const wxPoint& newpos )
 
     for( D_PAD* pad = m_Pads;  pad;  pad = pad->Next() )
     {
-        pad->m_Pos += delta;
+        pad->m_Pos += FROM_LEGACY_LU_VEC( delta );
     }
 
     EDA_ITEM* PtStruct = m_Drawings;
@@ -352,15 +352,15 @@ void MODULE::SetOrientation( int newangle )
 
     for( D_PAD* pad = m_Pads;  pad;  pad = pad->Next() )
     {
-        px = TO_LEGACY_LU( pad->m_Pos0.x );
-        py = TO_LEGACY_LU( pad->m_Pos0.y );
+        px = TO_LEGACY_LU( pad->m_Pos0.x() );
+        py = TO_LEGACY_LU( pad->m_Pos0.y() );
 
         pad->m_Orient += newangle; /* change m_Orientation */
         NORMALIZE_ANGLE_POS( pad->m_Orient );
 
         RotatePoint( &px, &py, m_Orient );
-        pad->m_Pos.x = m_Pos.x + px;
-        pad->m_Pos.y = m_Pos.y + py;
+        pad->m_Pos.x() = FROM_LEGACY_LU( m_Pos.x + px );
+        pad->m_Pos.y() = FROM_LEGACY_LU( m_Pos.y + py );
     }
 
     /* Update of the reference and value. */

pcbnew/class_netinfo_item.cpp

@@ -224,6 +224,6 @@ void RATSNEST_ITEM::Draw( EDA_DRAW_PANEL* panel,
 {
     GRSetDrawMode( DC, aDrawMode );
     int color = g_ColorsSettings.GetItemColor(RATSNEST_VISIBLE);
-    GRLine( &panel->m_ClipBox, DC, m_PadStart->m_Pos - aOffset,
-            m_PadEnd->m_Pos - aOffset, 0, color );
+    GRLine( &panel->m_ClipBox, DC, TO_LEGACY_LU_WXP( m_PadStart->m_Pos ) - aOffset,
+            TO_LEGACY_LU_WXP( m_PadEnd->m_Pos ) - aOffset, 0, color );
 }

pcbnew/class_pad.h

@@ -12,7 +12,7 @@
 #include "PolyLine.h"
 
 #include "lengthpcb.h"
-
+#include "vectorpcb.h"
 
 class LINE_READER;
 class EDA_3D_CANVAS;
@@ -72,8 +72,9 @@ private:
     wxString m_ShortNetname;    // short net name, like vout from /mysheet/mysubsheet/vout
 
 
-public:
-    wxPoint m_Pos;                  // pad Position on board
+public: /** TODO: that's not so good if parameters are easily modifiable outside
+    (e. g. m_Pos, which could be coherent with m_Pos and module orient/pos ) */
+    VECTOR_PCB m_Pos;                  // pad Position on board
 
     union
     {
@@ -114,7 +115,7 @@ public:
 
     VECTOR_PCB m_DeltaSize;            // delta on rectangular shapes
 
-    VECTOR_PCB m_Pos0;                 // Initial Pad position (i.e. pas position relative to the
+    VECTOR_PCB m_Pos0;                 // Initial Pad position (i.e. pad position relative to the
                                     // module anchor, orientation 0
 
     int     m_ShapeMaxRadius;       // radius of the circle containing the pad shape
@@ -177,16 +178,17 @@ public:
      * Function GetPosition
      * returns the position of this object.
      * @return const wxPoint& - The position of this object.
+     * @TODO: could move virtual method to .c file
      */
-    wxPoint& GetPosition()
+    wxPoint GetPosition() const
     {
-        return m_Pos;
+        return TO_LEGACY_LU_WXP( m_Pos );
     }
 
 
     void SetPosition( const wxPoint& aPos )
     {
-        m_Pos = aPos;
+        m_Pos = FROM_LEGACY_LU_VEC( aPos );
     }
 
     /**
@@ -385,7 +387,7 @@ public:
      */
     virtual void Move( const wxPoint& aMoveVector )
     {
-        m_Pos += aMoveVector;
+        m_Pos += FROM_LEGACY_LU_VEC( aMoveVector );
     }
 
 

pcbnew/class_pad_draw_functions.cpp

@@ -475,8 +475,8 @@ void D_PAD::DrawShape( EDA_RECT* aClipBox, wxDC* aDC, PAD_DRAWINFO& aDrawInfo )
     }
 
     /* Draw the pad hole */
-    wxPoint holepos = m_Pos - aDrawInfo.m_Offset;
-    int     hole    = TO_LEGACY_LU( m_Drill.x ) / 2;
+    wxPoint holepos = TO_LEGACY_LU_WXP( m_Pos ) - aDrawInfo.m_Offset;
+    int     hole    = TO_LEGACY_LU( m_Drill.x() ) / 2;
 
     bool drawhole = hole > 0;
 
@@ -513,20 +513,20 @@ void D_PAD::DrawShape( EDA_RECT* aClipBox, wxDC* aDC, PAD_DRAWINFO& aDrawInfo )
             break;
 
         case PAD_OVAL:
-            halfsize.x = TO_LEGACY_LU( m_Drill.x ) / 2;
-            halfsize.y = TO_LEGACY_LU( m_Drill.y ) / 2;
+            halfsize.x = TO_LEGACY_LU( m_Drill.x() ) / 2;
+            halfsize.y = TO_LEGACY_LU( m_Drill.y() ) / 2;
 
-            if( m_Drill.x > m_Drill.y )  /* horizontal */
+            if( m_Drill.x() > m_Drill.y() )  /* horizontal */
             {
                 delta_cx = halfsize.x - halfsize.y;
                 delta_cy = 0;
-                seg_width    = TO_LEGACY_LU( m_Drill.y );
+                seg_width    = TO_LEGACY_LU( m_Drill.y() );
             }
             else                         /* vertical */
             {
                 delta_cx = 0;
                 delta_cy = halfsize.y - halfsize.x;
-                seg_width    = TO_LEGACY_LU( m_Drill.x );
+                seg_width    = TO_LEGACY_LU( m_Drill.x() );
             }
 
             RotatePoint( &delta_cx, &delta_cy, angle );
@@ -578,11 +578,11 @@ void D_PAD::DrawShape( EDA_RECT* aClipBox, wxDC* aDC, PAD_DRAWINFO& aDrawInfo )
 
     AreaSize = TO_LEGACY_LU_WXS( m_Size );
 
-    if( m_Size.y > m_Size.x )
+    if( m_Size.y() > m_Size.x() )
     {
         angle += 900;
-        AreaSize.x = TO_LEGACY_LU( m_Size.y );
-        AreaSize.y = TO_LEGACY_LU( m_Size.x );
+        AreaSize.x = TO_LEGACY_LU( m_Size.y() );
+        AreaSize.y = TO_LEGACY_LU( m_Size.x() );
     }
 
     if( shortname_len > 0 )       // if there is a netname, provides room to display this netname
@@ -664,23 +664,23 @@ int D_PAD::BuildSegmentFromOvalShape(wxPoint& aSegStart, wxPoint& aSegEnd, int a
 {
     int width;
 
-    if( m_Size.y < m_Size.x )     // Build an horizontal equiv segment
+    if( m_Size.y() < m_Size.x() )     // Build an horizontal equiv segment
     {
-        int delta   = TO_LEGACY_LU( ( m_Size.x - m_Size.y ) / 2 );
+        int delta   = TO_LEGACY_LU( ( m_Size.x() - m_Size.y() ) / 2 );
         aSegStart.x = -delta;
         aSegStart.y = 0;
         aSegEnd.x = delta;
         aSegEnd.y = 0;
-        width = TO_LEGACY_LU( m_Size.y );
+        width = TO_LEGACY_LU( m_Size.y() );
     }
     else        // Vertical oval: build a vertical equiv segment
     {
-        int delta   = TO_LEGACY_LU( ( m_Size.y -m_Size.x ) / 2 );
+        int delta   = TO_LEGACY_LU( ( m_Size.y() -m_Size.x() ) / 2 );
         aSegStart.x = 0;
         aSegStart.y = -delta;
         aSegEnd.x = 0;
         aSegEnd.y = delta;
-        width = TO_LEGACY_LU( m_Size.x );
+        width = TO_LEGACY_LU( m_Size.x() );
     }
 
     if( aRotation )
@@ -701,8 +701,8 @@ void D_PAD::BuildPadPolygon( wxPoint aCoord[4], wxSize aInflateValue, int aRotat
     wxSize delta;
     wxSize halfsize;
 
-    halfsize.x = TO_LEGACY_LU( m_Size.x / 2 );
-    halfsize.y = TO_LEGACY_LU( m_Size.y / 2 );
+    halfsize.x = TO_LEGACY_LU( m_Size.x() / 2 );
+    halfsize.y = TO_LEGACY_LU( m_Size.y() / 2 );
 
     /* For rectangular shapes, inflate is easy
      */
@@ -721,8 +721,8 @@ void D_PAD::BuildPadPolygon( wxPoint aCoord[4], wxSize aInflateValue, int aRotat
     else
     {
         // Trapezoidal pad: verify delta values
-        delta.x = TO_LEGACY_LU( m_DeltaSize.x / 2 );
-        delta.y = TO_LEGACY_LU( m_DeltaSize.y / 2 );
+        delta.x = TO_LEGACY_LU( m_DeltaSize.x() / 2 );
+        delta.y = TO_LEGACY_LU( m_DeltaSize.y() / 2 );
 
         // be sure delta values are not to large
         if( (delta.x < 0) && (delta.x <= -halfsize.y) )
@@ -762,7 +762,7 @@ void D_PAD::BuildPadPolygon( wxPoint aCoord[4], wxSize aInflateValue, int aRotat
         if( delta.y )    // lower and upper segment is horizontal
         {
             // Calculate angle of left (or right) segment with vertical axis
-            angle = atan2( m_DeltaSize.y, m_Size.y ); /// TODO: make atan2 available to LENGTH
+            angle = atan2( m_DeltaSize.y(), m_Size.y() );
 
             // left and right sides are moved by aInflateValue.x in their perpendicular direction
             // We must calculate the corresponding displacement on the horizontal axis
@@ -778,7 +778,7 @@ void D_PAD::BuildPadPolygon( wxPoint aCoord[4], wxSize aInflateValue, int aRotat
         else if( delta.x )          // left and right segment is vertical
         {
             // Calculate angle of lower (or upper) segment with horizontal axis
-            angle = atan2( m_DeltaSize.x, m_Size.x );
+            angle = atan2( m_DeltaSize.x(), m_Size.x() );
 
             // lower and upper sides are moved by aInflateValue.x in their perpendicular direction
             // We must calculate the corresponding displacement on the vertical axis

pcbnew/class_pcb_text.h

@@ -26,7 +26,7 @@ public:
      * returns the position of this object.
      * @return wxPoint& - The position of this object, non-const so it can be changed
      */
-    wxPoint& GetPosition()
+    wxPoint GetPosition() const
     {
         return m_Pos;   // within EDA_TEXT
     }

pcbnew/class_text_mod.h

@@ -51,7 +51,7 @@ public:
      * Required by pure virtual BOARD_ITEM::GetPosition()
      * @return const wxPoint& - The position of this object.
      */
-    wxPoint& GetPosition()
+    wxPoint GetPosition() const
     {
         return m_Pos;
     }

pcbnew/class_track.h

@@ -122,7 +122,7 @@ public:
      * returns the position of this object.
      * @return const wxPoint& - The position of this object.
      */
-    wxPoint& GetPosition()
+    wxPoint GetPosition() const
     {
         return m_Start;  // it had to be start or end.
     }
@@ -470,7 +470,7 @@ public:
      * returns the position of this object.
      * @return const wxPoint& - The position of this object.
      */
-    wxPoint& GetPosition()
+    wxPoint GetPosition() const
     {
         return m_Start;
     }

pcbnew/class_zone.cpp

@@ -84,18 +84,9 @@ bool ZONE_CONTAINER::UnFill()
 }
 
 
-wxPoint& ZONE_CONTAINER::GetPosition()
+wxPoint ZONE_CONTAINER::GetPosition() const
 {
-    static wxPoint pos;
-
-    if( m_Poly )
-    {
-        pos = GetCornerPosition( 0 );
-    }
-    else
-        pos = wxPoint( 0, 0 );
-
-    return pos;
+    return m_Poly? GetCornerPosition( 0 ) : wxPoint( 0, 0 );
 }
 
 

pcbnew/class_zone.h

@@ -118,7 +118,7 @@ public:
      * Function GetPosition
      * @return a wxPoint, position of the first point of the outline
      */
-    wxPoint& GetPosition();
+    wxPoint GetPosition() const;
 
     /**
      * Function copy

pcbnew/clean.cpp

@@ -850,7 +850,7 @@ void ConnectDanglingEndToPad( PCB_EDIT_FRAME* frame )
         if( pad )
         {
             // test if the track start point is not exactly starting on the pad
-            if( segment->m_Start != pad->m_Pos )
+            if( segment->m_Start != TO_LEGACY_LU_WXP( pad->m_Pos ) )
             {
                 if( segment->GetTrace( frame->GetBoard()->m_Track, NULL, START ) == NULL )
                 {
@@ -858,7 +858,7 @@ void ConnectDanglingEndToPad( PCB_EDIT_FRAME* frame )
 
                     frame->GetBoard()->m_Track.Insert( newTrack, segment->Next() );
 
-                    newTrack->m_End = pad->m_Pos;
+                    newTrack->m_End = TO_LEGACY_LU_WXP( pad->m_Pos );
                     newTrack->start = segment;
                     newTrack->end   = pad;
 
@@ -872,7 +872,7 @@ void ConnectDanglingEndToPad( PCB_EDIT_FRAME* frame )
         if( pad )
         {
             // test if the track end point is not exactly on the pad
-            if( segment->m_End != pad->m_Pos )
+            if( segment->m_End != TO_LEGACY_LU_WXP( pad->m_Pos ) )
             {
                 if( segment->GetTrace( frame->GetBoard()->m_Track, NULL, END ) == NULL )
                 {
@@ -880,7 +880,7 @@ void ConnectDanglingEndToPad( PCB_EDIT_FRAME* frame )
 
                     frame->GetBoard()->m_Track.Insert( newTrack, segment->Next() );
 
-                    newTrack->m_Start = pad->m_Pos;
+                    newTrack->m_Start = TO_LEGACY_LU_WXP( pad->m_Pos );
 
                     newTrack->start = pad;
                     newTrack->end   = segment;

pcbnew/dialogs/dialog_gendrill.cpp

@@ -185,7 +185,7 @@ void DIALOG_GENDRILL::InitDisplayParams( void )
         {
             if( pad->m_DrillShape == PAD_CIRCLE )
             {
-                if( pad->m_Drill.x != ZERO_LENGTH )
+                if( pad->m_Drill.x() != ZERO_LENGTH )
                 {
                     if( pad->m_Attribut == PAD_HOLE_NOT_PLATED )
                         m_notplatedPadsHoleCount++;
@@ -195,7 +195,7 @@ void DIALOG_GENDRILL::InitDisplayParams( void )
             }
             else
             {
-                if( MIN( TO_LEGACY_LU( pad->m_Drill.x ), TO_LEGACY_LU( pad->m_Drill.y ) ) != 0 )
+                if( min( TO_LEGACY_LU( pad->m_Drill.x() ), TO_LEGACY_LU( pad->m_Drill.y() ) ) != 0 )
                 {
                     if( pad->m_Attribut == PAD_HOLE_NOT_PLATED )
                         m_notplatedPadsHoleCount++;

pcbnew/dragsegm.cpp

@@ -52,7 +52,7 @@ void DrawSegmentWhileMovingFootprint( EDA_DRAW_PANEL* panel, wxDC* DC )
 
         if( pt_pad )
         {
-            pos = pt_pad->m_Pos - g_Offset_Module;
+            pos = TO_LEGACY_LU_WXP( pt_pad->m_Pos ) - g_Offset_Module;
             Track->m_Start = pos;
         }
 
@@ -60,7 +60,7 @@ void DrawSegmentWhileMovingFootprint( EDA_DRAW_PANEL* panel, wxDC* DC )
 
         if( pt_pad )
         {
-            pos = pt_pad->m_Pos - g_Offset_Module;
+            pos = TO_LEGACY_LU_WXP( pt_pad->m_Pos ) - g_Offset_Module;
             Track->m_End = pos;
         }
 
@@ -105,7 +105,7 @@ void Build_1_Pad_SegmentsToDrag( EDA_DRAW_PANEL* panel, wxDC* DC, D_PAD* PtPad )
 
     Track = pcb->m_Track->GetStartNetCode( net_code );
 
-    pos = PtPad->m_Pos;
+    pos = TO_LEGACY_LU_WXP( PtPad->m_Pos );
     LayerMask = PtPad->m_layerMask;
 
     for( ; Track; Track = Track->Next() )

pcbnew/drc.cpp

@@ -592,7 +592,7 @@ bool DRC::doPadToPadsDrc( D_PAD* aRefPad, D_PAD** aStart, D_PAD** aEnd, int x_li
 
         // We can stop the test when pad->m_Pos.x > x_limit
         // because the list is sorted by X values
-        if( pad->m_Pos.x > x_limit )
+        if( TO_LEGACY_LU( pad->m_Pos.x() ) > x_limit )
             break;
 
         // No problem if pads are on different copper layers,
@@ -617,7 +617,7 @@ bool DRC::doPadToPadsDrc( D_PAD* aRefPad, D_PAD** aStart, D_PAD** aEnd, int x_li
             /* Here, we must test clearance between holes and pads
              * dummy pad size and shape is adjusted to pad drill size and shape
              */
-            if( pad->m_Drill.x != ZERO_LENGTH )
+            if( pad->m_Drill.x() != ZERO_LENGTH )
             {
                 // pad under testing has a hole, test this hole against pad reference
                 dummypad.SetPosition( pad->GetPosition() );
@@ -637,7 +637,7 @@ bool DRC::doPadToPadsDrc( D_PAD* aRefPad, D_PAD** aStart, D_PAD** aEnd, int x_li
                 }
             }
 
-            if( aRefPad->m_Drill.x != ZERO_LENGTH ) // pad reference has a hole
+            if( aRefPad->m_Drill.x() != ZERO_LENGTH ) // pad reference has a hole
             {
                 dummypad.SetPosition( aRefPad->GetPosition() );
                 dummypad.m_Size     = aRefPad->m_Drill;

pcbnew/drc_clearance_test_functions.cpp

@@ -290,7 +290,7 @@ bool DRC::doTrackDrc( TRACK* aRefSeg, TRACK* aStart, bool testPads )
                  * checkClearanceSegmToPad(),a pseudo pad is used, with a shape and a
                  * size like the hole
                  */
-                if( pad->m_Drill.x == ZERO_LENGTH )
+                if( pad->m_Drill.x() == ZERO_LENGTH )
                     continue;
 
                 dummypad.m_Size     = pad->m_Drill;
@@ -633,7 +633,7 @@ bool DRC::checkClearancePadToPad( D_PAD* aRefPad, D_PAD* aPad )
         m_segmEnd.x = m_segmEnd.y = 0;
 
         m_padToTestPos = relativePadPos;
-        diag = checkClearanceSegmToPad( aPad, TO_LEGACY_LU( aRefPad->m_Size.x ), dist_min );
+        diag = checkClearanceSegmToPad( aPad, TO_LEGACY_LU( aRefPad->m_Size.x() ), dist_min );
         break;
 
     case PAD_RECT:
@@ -664,10 +664,10 @@ bool DRC::checkClearancePadToPad( D_PAD* aRefPad, D_PAD* aPad )
                 relativePadPos.x = ABS( relativePadPos.x );
                 relativePadPos.y = ABS( relativePadPos.y );
 
-                if( ( relativePadPos.x - ( (size.x + TO_LEGACY_LU( aRefPad->m_Size.x ) ) / 2 ) ) >= dist_min )
+                if( ( relativePadPos.x - ( (size.x + TO_LEGACY_LU( aRefPad->m_Size.x() ) ) / 2 ) ) >= dist_min )
                     diag = true;
 
-                if( ( relativePadPos.y - ( (size.y + TO_LEGACY_LU( aRefPad->m_Size.y) ) / 2 ) ) >= dist_min )
+                if( ( relativePadPos.y - ( (size.y + TO_LEGACY_LU( aRefPad->m_Size.y() ) ) / 2 ) ) >= dist_min )
                     diag = true;
             }
             else    // at least one pad has any other orient. Test is more tricky
@@ -716,15 +716,15 @@ bool DRC::checkClearancePadToPad( D_PAD* aRefPad, D_PAD* aPad )
         int segm_width;
         m_segmAngle = aRefPad->m_Orient;                // Segment orient.
 
-        if( aRefPad->m_Size.y < aRefPad->m_Size.x )     // Build an horizontal equiv segment
+        if( aRefPad->m_Size.y() < aRefPad->m_Size.x() )     // Build an horizontal equiv segment
         {
-            segm_width   = TO_LEGACY_LU( aRefPad->m_Size.y );
-            m_segmLength = TO_LEGACY_LU( aRefPad->m_Size.x - aRefPad->m_Size.y );
+            segm_width   = TO_LEGACY_LU( aRefPad->m_Size.y() );
+            m_segmLength = TO_LEGACY_LU( aRefPad->m_Size.x() - aRefPad->m_Size.y() );
         }
         else        // Vertical oval: build an horizontal equiv segment and rotate 90.0 deg
         {
-            segm_width   = TO_LEGACY_LU( aRefPad->m_Size.x );
-            m_segmLength = TO_LEGACY_LU( aRefPad->m_Size.y - aRefPad->m_Size.x );
+            segm_width   = TO_LEGACY_LU( aRefPad->m_Size.x() );
+            m_segmLength = TO_LEGACY_LU( aRefPad->m_Size.y() - aRefPad->m_Size.x() );
             m_segmAngle += 900;
         }
 
@@ -796,13 +796,13 @@ bool DRC::checkClearanceSegmToPad( const D_PAD* aPad, int aSegmentWidth, int aMi
     int     segmHalfWidth = aSegmentWidth / 2;
 
     seuil = segmHalfWidth + aMinDist;
-    padHalfsize.x = TO_LEGACY_LU( aPad->m_Size.x / 2 );
-    padHalfsize.y = TO_LEGACY_LU( aPad->m_Size.y / 2 );
+    padHalfsize.x = TO_LEGACY_LU( aPad->m_Size.x() / 2 );
+    padHalfsize.y = TO_LEGACY_LU( aPad->m_Size.y() / 2 );
 
     if( aPad->m_PadShape == PAD_TRAPEZOID ) // The size is bigger, due to m_DeltaSize extra size
     {
-        padHalfsize.x += TO_LEGACY_LU( ABS(aPad->m_DeltaSize.y) / 2 );   // Remember: m_DeltaSize.y is the m_Size.x change
-        padHalfsize.y += TO_LEGACY_LU( ABS(aPad->m_DeltaSize.x) / 2 );   // Remember: m_DeltaSize.x is the m_Size.y change
+        padHalfsize.x += TO_LEGACY_LU( abs( aPad->m_DeltaSize.y() ) / 2 );   // Remember: m_DeltaSize.y is the m_Size.x change
+        padHalfsize.y += TO_LEGACY_LU( abs( aPad->m_DeltaSize.x() ) / 2 );   // Remember: m_DeltaSize.x is the m_Size.y change
     }
 
     if( aPad->m_PadShape == PAD_CIRCLE )

pcbnew/editmod.cpp

@@ -82,7 +82,7 @@ void FOOTPRINT_EDIT_FRAME::Place_Ancre( MODULE* pt_mod )
 
     for( ; pt_pad != NULL; pt_pad = pt_pad->Next() )
     {
-        pt_pad->m_Pos0 += VECTOR_PCB( FROM_LEGACY_LU( moveVector.x ), FROM_LEGACY_LU( moveVector.y ) );
+        pt_pad->m_Pos0 += VECTOR_PCB::fromXY( FROM_LEGACY_LU( moveVector.x ), FROM_LEGACY_LU( moveVector.y ) );
     }
 
     /* Update the draw element coordinates. */

pcbnew/editrack.cpp

@@ -125,7 +125,7 @@ TRACK* PCB_EDIT_FRAME::Begin_Route( TRACK* aTrack, wxDC* aDC )
                 pt_pad = (D_PAD*) LockPoint;
 
                 /* A pad is found: put the starting point on pad center */
-                pos = pt_pad->m_Pos;
+                pos = TO_LEGACY_LU_WXP( pt_pad->m_Pos );
                 GetBoard()->SetHighLightNet( pt_pad->GetNet() );
             }
             else /* A track segment is found */
@@ -1067,7 +1067,7 @@ void DeleteNullTrackSegments( BOARD* pcb, DLIST<TRACK>& aTrackList )
  */
 void EnsureEndTrackOnPad( D_PAD* Pad )
 {
-    if( g_CurrentTrackSegment->m_End == Pad->m_Pos ) // Ok !
+    if( g_CurrentTrackSegment->m_End == TO_LEGACY_LU_WXP( Pad->m_Pos ) ) // Ok !
     {
         g_CurrentTrackSegment->end = Pad;
         g_CurrentTrackSegment->SetState( END_ONPAD, ON );
@@ -1084,7 +1084,7 @@ void EnsureEndTrackOnPad( D_PAD* Pad )
         lasttrack->end = g_CurrentTrackSegment;
     }
 
-    g_CurrentTrackSegment->m_End = Pad->m_Pos;
+    g_CurrentTrackSegment->m_End = TO_LEGACY_LU_WXP( Pad->m_Pos );
     g_CurrentTrackSegment->SetState( END_ONPAD, OFF );
 
     g_CurrentTrackSegment->end = Pad;

pcbnew/export_gencad.cpp

@@ -252,70 +252,70 @@ void CreatePadsShapesSection( FILE* file, BOARD* pcb )
 
         fprintf( file, "PAD PAD%d", pad->GetSubRatsnest() );
 
-        int dx = TO_LEGACY_LU( pad->m_Size.x / 2 );
-        int dy = TO_LEGACY_LU( pad->m_Size.y / 2 );
+        int dx = TO_LEGACY_LU( pad->m_Size.x() / 2 );
+        int dy = TO_LEGACY_LU( pad->m_Size.y() / 2 );
 
         switch( pad->m_PadShape )
         {
         default:
         case PAD_CIRCLE:
             pad_type = "ROUND";                   // how about oval holes?
-            fprintf( file, " %s %d\n", pad_type, ( int )TO_LEGACY_LU( pad->m_Drill.x ) );
+            fprintf( file, " %s %d\n", pad_type, ( int )TO_LEGACY_LU( pad->m_Drill.x() ) );
             fprintf( file, "CIRCLE %d %d %d\n",
-                     TO_LEGACY_LU( pad->m_Offset.x ), -TO_LEGACY_LU( pad->m_Offset.y ), dx );
+                     TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ), dx );
             break;
 
         case PAD_RECT:
             pad_type = "RECTANGULAR";
-            fprintf( file, " %s %d\n", pad_type, ( int )TO_LEGACY_LU( pad->m_Drill.x ) );
+            fprintf( file, " %s %d\n", pad_type, ( int )TO_LEGACY_LU( pad->m_Drill.x() ) );
             fprintf( file, "RECTANGLE %d %d %d %d\n",
-                     TO_LEGACY_LU( pad->m_Offset.x ) - dx, -TO_LEGACY_LU( pad->m_Offset.y ) - dy,
-                     TO_LEGACY_LU( pad->m_Size.x ), TO_LEGACY_LU( pad->m_Size.y ) );
+                     TO_LEGACY_LU( pad->m_Offset.x() ) - dx, -TO_LEGACY_LU( pad->m_Offset.y() ) - dy,
+                     TO_LEGACY_LU( pad->m_Size.x() ), TO_LEGACY_LU( pad->m_Size.y() ) );
             break;
 
         case PAD_OVAL:     /* Create outline by 2 lines and 2 arcs */
         {
             pad_type = "FINGER";
-            fprintf( file, " %s %d\n", pad_type, ( int )TO_LEGACY_LU( pad->m_Drill.x ) );
+            fprintf( file, " %s %d\n", pad_type, ( int )TO_LEGACY_LU( pad->m_Drill.x() ) );
             int dr = dx - dy;
             if( dr >= 0 )       // Horizontal oval
             {
                 int radius = dy;
                 fprintf( file, "LINE %d %d %d %d\n",
-                         -dr + TO_LEGACY_LU( pad->m_Offset.x ), -TO_LEGACY_LU( pad->m_Offset.y ) - radius,
-                         dr + TO_LEGACY_LU( pad->m_Offset.x ), -TO_LEGACY_LU( pad->m_Offset.y ) - radius );
+                         -dr + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) - radius,
+                         dr + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) - radius );
                 fprintf( file, "ARC %d %d %d %d %d %d\n",
-                         dr + TO_LEGACY_LU( pad->m_Offset.x ), -TO_LEGACY_LU( pad->m_Offset.y ) - radius,
-                         dr + TO_LEGACY_LU( pad->m_Offset.x ), -TO_LEGACY_LU( pad->m_Offset.y ) + radius,
-                         dr + TO_LEGACY_LU( pad->m_Offset.x ), -TO_LEGACY_LU( pad->m_Offset.y ) );
+                         dr + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) - radius,
+                         dr + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) + radius,
+                         dr + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) );
 
                 fprintf( file, "LINE %d %d %d %d\n",
-                         dr + TO_LEGACY_LU( pad->m_Offset.x ), -TO_LEGACY_LU( pad->m_Offset.y ) + radius,
-                         -dr + TO_LEGACY_LU( pad->m_Offset.x ), -TO_LEGACY_LU( pad->m_Offset.y ) + radius );
+                         dr + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) + radius,
+                         -dr + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) + radius );
                 fprintf( file, "ARC %d %d %d %d %d %d\n",
-                         -dr + TO_LEGACY_LU( pad->m_Offset.x ), -TO_LEGACY_LU( pad->m_Offset.y ) + radius,
-                         -dr + TO_LEGACY_LU( pad->m_Offset.x ), -TO_LEGACY_LU( pad->m_Offset.y ) - radius,
-                         -dr + TO_LEGACY_LU( pad->m_Offset.x ), -TO_LEGACY_LU( pad->m_Offset.y ) );
+                         -dr + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) + radius,
+                         -dr + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) - radius,
+                         -dr + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) );
             }
             else        // Vertical oval
             {
                 dr = -dr;
                 int radius = dx;
                 fprintf( file, "LINE %d %d %d %d\n",
-                         -radius + TO_LEGACY_LU( pad->m_Offset.x ), -TO_LEGACY_LU( pad->m_Offset.y ) - dr,
-                         -radius + TO_LEGACY_LU( pad->m_Offset.x ), -TO_LEGACY_LU( pad->m_Offset.y ) + dr );
+                         -radius + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) - dr,
+                         -radius + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) + dr );
                 fprintf( file, "ARC %d %d %d %d %d %d\n",
-                         -radius + TO_LEGACY_LU( pad->m_Offset.x ), -TO_LEGACY_LU( pad->m_Offset.y ) + dr,
-                         radius + TO_LEGACY_LU( pad->m_Offset.x ), -TO_LEGACY_LU( pad->m_Offset.y ) + dr,
-                         TO_LEGACY_LU( pad->m_Offset.x ), -TO_LEGACY_LU( pad->m_Offset.y ) + dr );
+                         -radius + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) + dr,
+                         radius + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) + dr,
+                         TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) + dr );
 
                 fprintf( file, "LINE %d %d %d %d\n",
-                         radius + TO_LEGACY_LU( pad->m_Offset.x ), -TO_LEGACY_LU( pad->m_Offset.y ) + dr,
-                         radius + TO_LEGACY_LU( pad->m_Offset.x ), -TO_LEGACY_LU( pad->m_Offset.y ) - dr );
+                         radius + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) + dr,
+                         radius + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) - dr );
                 fprintf( file, "ARC %d %d %d %d %d %d\n",
-                         radius + TO_LEGACY_LU( pad->m_Offset.x ), -TO_LEGACY_LU( pad->m_Offset.y ) - dr,
-                         -radius + TO_LEGACY_LU( pad->m_Offset.x ), -TO_LEGACY_LU( pad->m_Offset.y ) - dr,
-                         TO_LEGACY_LU( pad->m_Offset.x ), -TO_LEGACY_LU( pad->m_Offset.y ) - dr );
+                         radius + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) - dr,
+                         -radius + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) - dr,
+                         TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) - dr );
             }
             break;
         }
@@ -410,7 +410,7 @@ void CreateShapesSection( FILE* file, BOARD* pcb )
             NORMALIZE_ANGLE_POS( orient );
             fprintf( file, "PIN %s PAD%d %d %d %s %d %s",
                      TO_UTF8( pinname ), pad->GetSubRatsnest(),
-                     TO_LEGACY_LU( pad->m_Pos0.x ), TO_LEGACY_LU( -pad->m_Pos0.y ),
+                     TO_LEGACY_LU( pad->m_Pos0.x() ), TO_LEGACY_LU( -pad->m_Pos0.y() ),
                      layer, orient / 10, mirror );
 
             if( orient % 10 )

pcbnew/export_vrml.cpp

@@ -881,11 +881,11 @@ static void export_vrml_edge_module( EDGE_MODULE* module ) /*{{{*/
 
 static void export_vrml_pad( BOARD* pcb, D_PAD* pad ) /*{{{*/
 {
-    double hole_drill_w = (double) TO_LEGACY_LU_DBL( pad->m_Drill.x / 2 );
-    double hole_drill_h = (double) TO_LEGACY_LU_DBL( pad->m_Drill.y / 2 );
+    double hole_drill_w = (double) TO_LEGACY_LU_DBL( pad->m_Drill.x() / 2 );
+    double hole_drill_h = (double) TO_LEGACY_LU_DBL( pad->m_Drill.y() / 2 );
     double hole_drill   = MIN( hole_drill_w, hole_drill_h );
-    double hole_x = pad->m_Pos.x;
-    double hole_y = pad->m_Pos.y;
+    double hole_x = TO_LEGACY_LU_DBL( pad->m_Pos.x() );
+    double hole_y = TO_LEGACY_LU_DBL( pad->m_Pos.y() );
 
     /* Export the hole on the edge layer */
     if( hole_drill > 0 )
@@ -916,8 +916,8 @@ static void export_vrml_pad( BOARD* pcb, D_PAD* pad ) /*{{{*/
     wxSize        pad_delta = TO_LEGACY_LU_WXS( pad->m_DeltaSize );
     double        pad_dx    = pad_delta.x / 2;
     double        pad_dy    = pad_delta.y / 2;
-    double        pad_w     = TO_LEGACY_LU_DBL( pad->m_Size.x / 2 );
-    double        pad_h     = TO_LEGACY_LU_DBL( pad->m_Size.y / 2 );
+    double        pad_w     = TO_LEGACY_LU_DBL( pad->m_Size.x() / 2 );
+    double        pad_h     = TO_LEGACY_LU_DBL( pad->m_Size.y() / 2 );
 
     for( int layer = FIRST_COPPER_LAYER; layer < copper_layers; layer++ )
     {

pcbnew/gen_holes_and_tools_lists_for_drill.cpp

@@ -127,22 +127,22 @@ void Build_Holes_List( BOARD* aPcb,
                 if( aGenerateNPTH_list && pad->m_Attribut != PAD_HOLE_NOT_PLATED )
                     continue;
 
-                if( pad->m_Drill.x == ZERO_LENGTH )
+                if( pad->m_Drill.x() == ZERO_LENGTH )
                     continue;
 
                 new_hole.m_Hole_NotPlated = (pad->m_Attribut == PAD_HOLE_NOT_PLATED);
                 new_hole.m_Tool_Reference = -1;         // Flag is: Not initialized
                 new_hole.m_Hole_Orient    = pad->m_Orient;
                 new_hole.m_Hole_Shape    = 0;           // hole shape: round
-                new_hole.m_Hole_Diameter = min( TO_LEGACY_LU( pad->m_Drill.x ), TO_LEGACY_LU( pad->m_Drill.y ) );
+                new_hole.m_Hole_Diameter = min( TO_LEGACY_LU( pad->m_Drill.x() ), TO_LEGACY_LU( pad->m_Drill.y() ) );
                 new_hole.m_Hole_Size.x    = new_hole.m_Hole_Size.y = new_hole.m_Hole_Diameter;
 
                 if( pad->m_DrillShape != PAD_CIRCLE )
                     new_hole.m_Hole_Shape = 1; // oval flag set
 
-                new_hole.m_Hole_Size.x = TO_LEGACY_LU( pad->m_Drill.x );
-                new_hole.m_Hole_Size.y = TO_LEGACY_LU( pad->m_Drill.y );
-                new_hole.m_Hole_Pos = pad->m_Pos;               // hole position
+                new_hole.m_Hole_Size.x = TO_LEGACY_LU( pad->m_Drill.x() );
+                new_hole.m_Hole_Size.y = TO_LEGACY_LU( pad->m_Drill.y() );
+                new_hole.m_Hole_Pos = TO_LEGACY_LU_WXP( pad->m_Pos );               // hole position
                 new_hole.m_Hole_Bottom_Layer = LAYER_N_BACK;
                 new_hole.m_Hole_Top_Layer    = LAYER_N_FRONT;// pad holes are through holes
                 aHoleListBuffer.push_back( new_hole );

pcbnew/gen_modules_placefile.cpp

@@ -438,19 +438,20 @@ void PCB_EDIT_FRAME::GenModuleReport( wxCommandEvent& event )
         {
             fprintf( rptfile, "$PAD \"%.4s\"\n", pad->m_Padname );
             sprintf( line, "position %9.6f %9.6f\n",
-                     TO_LEGACY_LU_DBL( pad->m_Pos0.x ) * conv_unit,
-                     TO_LEGACY_LU_DBL( pad->m_Pos0.y ) * conv_unit );
+                     TO_LEGACY_LU_DBL( pad->m_Pos0.x() ) * conv_unit,
+                     TO_LEGACY_LU_DBL( pad->m_Pos0.y() ) * conv_unit );
             fputs( line, rptfile );
 
             sprintf( line, "size %9.6f %9.6f\n",
-                     TO_LEGACY_LU_DBL( pad->m_Size.x ) * conv_unit,
-                     TO_LEGACY_LU_DBL( pad->m_Size.y ) * conv_unit );
+                     TO_LEGACY_LU_DBL( pad->m_Size.x() ) * conv_unit,
+                     TO_LEGACY_LU_DBL( pad->m_Size.y() ) * conv_unit );
             fputs( line, rptfile );
-            sprintf( line, "drill %9.6f\n", TO_LEGACY_LU_DBL( pad->m_Drill.x ) * conv_unit );
+            sprintf( line, "drill %9.6f\n",
+                     TO_LEGACY_LU_DBL( pad->m_Drill.x() ) * conv_unit );
             fputs( line, rptfile );
             sprintf( line, "shape_offset %9.6f %9.6f\n",
-                     TO_LEGACY_LU_DBL( pad->m_Offset.x ) * conv_unit,
-                     TO_LEGACY_LU_DBL( pad->m_Offset.y ) * conv_unit );
+                     TO_LEGACY_LU_DBL( pad->m_Offset.x() ) * conv_unit,
+                     TO_LEGACY_LU_DBL( pad->m_Offset.y() ) * conv_unit );
             fputs( line, rptfile );
 
             sprintf( line, "orientation  %.2f\n",

pcbnew/globaleditpad.cpp

@@ -254,19 +254,19 @@ void PCB_BASE_FRAME::Global_Import_Pad_Settings( D_PAD* aPad, bool aDraw )
 
             if( pt_pad->m_PadShape != PAD_TRAPEZOID )
             {
-                pt_pad->m_DeltaSize.x = ZERO_LENGTH;
-                pt_pad->m_DeltaSize.y = ZERO_LENGTH;
+                pt_pad->m_DeltaSize.x() = ZERO_LENGTH;
+                pt_pad->m_DeltaSize.y() = ZERO_LENGTH;
             }
             if( pt_pad->m_PadShape == PAD_CIRCLE )
-                pt_pad->m_Size.y = pt_pad->m_Size.x;
+                pt_pad->m_Size.y() = pt_pad->m_Size.x();
 
             switch( pt_pad->m_Attribut & 0x7F )
             {
             case PAD_SMD:
             case PAD_CONN:
-                pt_pad->m_Drill    = VECTOR_PCB(ZERO_LENGTH, ZERO_LENGTH);//wxSize( 0, 0 );
-                pt_pad->m_Offset.x = ZERO_LENGTH;
-                pt_pad->m_Offset.y = ZERO_LENGTH;
+                pt_pad->m_Drill      = VECTOR_PCB::fromXY(ZERO_LENGTH, ZERO_LENGTH);//wxSize( 0, 0 );
+                pt_pad->m_Offset.x() = ZERO_LENGTH;
+                pt_pad->m_Offset.y() = ZERO_LENGTH;
                 break;
 
             default:

pcbnew/gpcb_exchange.cpp

@@ -369,16 +369,16 @@ bool MODULE::Read_GPCB_Descr( const wxString& CmpFullFileName )
             {
                 Pad->SetPadName( params[10] );
             }
-            Pad->m_Pos.x  = (ibuf[0] + ibuf[2]) / 2;
-            Pad->m_Pos.y  = (ibuf[1] + ibuf[3]) / 2;
-            Pad->m_Size.x = FROM_LEGACY_LU( ibuf[4] + abs( ibuf[0] - ibuf[2] ) );
-            Pad->m_Size.y = FROM_LEGACY_LU( ibuf[4] + abs( ibuf[1] - ibuf[3] ) );
-            Pad->m_Pos.x += m_Pos.x;
-            Pad->m_Pos.y += m_Pos.y;
+            Pad->m_Pos.x()  = FROM_LEGACY_LU( (ibuf[0] + ibuf[2]) / 2 );
+            Pad->m_Pos.y()  = FROM_LEGACY_LU( (ibuf[1] + ibuf[3]) / 2 );
+            Pad->m_Size.x() = FROM_LEGACY_LU( ibuf[4] + abs( ibuf[0] - ibuf[2] ) );
+            Pad->m_Size.y() = FROM_LEGACY_LU( ibuf[4] + abs( ibuf[1] - ibuf[3] ) );
+            Pad->m_Pos.x()  += FROM_LEGACY_LU( m_Pos.x );
+            Pad->m_Pos.y()  += FROM_LEGACY_LU( m_Pos.y );
 
             if( !TestFlags( params[iflgidx], 0x0100, wxT( "square" ) ) )
             {
-                if( Pad->m_Size.x == Pad->m_Size.y )
+                if( Pad->m_Size.x() == Pad->m_Size.y() )
                     Pad->m_PadShape = PAD_ROUND;
                 else
                     Pad->m_PadShape = PAD_OVAL;
@@ -428,14 +428,15 @@ bool MODULE::Read_GPCB_Descr( const wxString& CmpFullFileName )
                 Pad->SetPadName( params[9] );
             }
 
-            Pad->m_Pos.x   = ibuf[0];
-            Pad->m_Pos.y   = ibuf[1];
-            Pad->m_Drill.x = Pad->m_Drill.y = FROM_LEGACY_LU( (int) ibuf[5] );
-            Pad->m_Size.x  = Pad->m_Size.y = FROM_LEGACY_LU( ibuf[3] ) + Pad->m_Drill.x;
-            Pad->m_Pos.x  += m_Pos.x;
-            Pad->m_Pos.y  += m_Pos.y;
+            Pad->m_Pos.x()   = FROM_LEGACY_LU( ibuf[0] );
+            Pad->m_Pos.y()   = FROM_LEGACY_LU( ibuf[1] );
+            Pad->m_Drill.x() = Pad->m_Drill.y() = FROM_LEGACY_LU( (int) ibuf[5] );
+            Pad->m_Size.x()  = Pad->m_Size.y()  =
+                                FROM_LEGACY_LU( ibuf[3] ) + Pad->m_Drill.x();
+            Pad->m_Pos.x()  += FROM_LEGACY_LU( m_Pos.x );
+            Pad->m_Pos.y()  += FROM_LEGACY_LU( m_Pos.y );
 
-            if( (Pad->m_PadShape == PAD_ROUND) && (Pad->m_Size.x != Pad->m_Size.y) )
+            if( (Pad->m_PadShape == PAD_ROUND) && (Pad->m_Size.x() != Pad->m_Size.y()) )
                 Pad->m_PadShape = PAD_OVAL;
 
             m_Pads.PushBack( Pad );

pcbnew/graphpcb.cpp

@@ -89,7 +89,7 @@ void PlacePad( BOARD* Pcb, D_PAD* pt_pad, int color, int marge, int op_logic )
     int     dx, dy;
     wxPoint shape_pos = pt_pad->ReturnShapePos();
 
-    dx = TO_LEGACY_LU( pt_pad->m_Size.x / 2 );
+    dx = TO_LEGACY_LU( pt_pad->m_Size.x() / 2 );
     dx += marge;
 
     if( pt_pad->m_PadShape == PAD_CIRCLE )
@@ -100,13 +100,13 @@ void PlacePad( BOARD* Pcb, D_PAD* pt_pad, int color, int marge, int op_logic )
     }
 
 
-    dy = TO_LEGACY_LU( pt_pad->m_Size.y / 2 );
+    dy = TO_LEGACY_LU( pt_pad->m_Size.y() / 2 );
     dy += marge;
 
     if( pt_pad->m_PadShape == PAD_TRAPEZOID )
     {
-        dx += TO_LEGACY_LU( ABS( pt_pad->m_DeltaSize.y ) / 2 );
-        dy += TO_LEGACY_LU( ABS( pt_pad->m_DeltaSize.x ) / 2 );
+        dx += TO_LEGACY_LU( abs( pt_pad->m_DeltaSize.y() ) / 2 );
+        dy += TO_LEGACY_LU( abs( pt_pad->m_DeltaSize.x() ) / 2 );
     }
 
     if( ( pt_pad->m_Orient % 900 ) == 0 ) /* The pad is a rectangle

pcbnew/ioascii.cpp

@@ -586,16 +586,16 @@ int PCB_BASE_FRAME::ReadSetup( LINE_READER* aReader )
 
         if( stricmp( line, "PadSize" ) == 0 )
         {
-            g_Pad_Master.m_Size.x = LENGTH_LOAD_STR( data );
+            g_Pad_Master.m_Size.x() = LENGTH_LOAD_STR( data );
             data = strtok( NULL, delims );
-            g_Pad_Master.m_Size.y = LENGTH_LOAD_STR( data );
+            g_Pad_Master.m_Size.y() = LENGTH_LOAD_STR( data );
             continue;
         }
 
         if( stricmp( line, "PadDrill" ) == 0 )
         {
-            g_Pad_Master.m_Drill.x = LENGTH_LOAD_STR( data );
-            g_Pad_Master.m_Drill.y = g_Pad_Master.m_Drill.x;
+            g_Pad_Master.m_Drill.x() = LENGTH_LOAD_STR( data );
+            g_Pad_Master.m_Drill.y() = g_Pad_Master.m_Drill.x();
             continue;
         }
 
@@ -757,8 +757,8 @@ static int WriteSetup( FILE* aFile, PCB_EDIT_FRAME* aFrame, BOARD* aBoard )
     fprintf( aFile, "EdgeModWidth %d\n", g_ModuleSegmentWidth );
     fprintf( aFile, "TextModSize %d %d\n", g_ModuleTextSize.x, g_ModuleTextSize.y );
     fprintf( aFile, "TextModWidth %d\n", g_ModuleTextWidth );
-    fprintf( aFile, "PadSize "FM_LENSV" "FM_LENSV"\n", ARG_LENSV( g_Pad_Master.m_Size.x ), ARG_LENSV( g_Pad_Master.m_Size.y ) );
-    fprintf( aFile, "PadDrill "FM_LENSV"\n", ARG_LENSV( g_Pad_Master.m_Drill.x ) );
+    fprintf( aFile, "PadSize "FM_LENSV" "FM_LENSV"\n", ARG_LENSV( g_Pad_Master.m_Size.x() ), ARG_LENSV( g_Pad_Master.m_Size.y() ) );
+    fprintf( aFile, "PadDrill "FM_LENSV"\n", ARG_LENSV( g_Pad_Master.m_Drill.x() ) );
     fprintf( aFile,
              "Pad2MaskClearance %d\n",
              aBoard->GetBoardDesignSettings()->m_SolderMaskMargin );

pcbnew/magnetic_tracks_functions.cpp

@@ -165,7 +165,7 @@ bool Magnetize( BOARD* m_Pcb, PCB_EDIT_FRAME* frame, int aCurrentTool, wxSize gr
             if( doCheckNet && currTrack && currTrack->GetNet() != pad->GetNet() )
                 return false;
 
-            *curpos = pad->m_Pos;
+            *curpos = TO_LEGACY_LU_WXP( pad->m_Pos );
             return true;
         }
     }

pcbnew/modedit.cpp

@@ -708,18 +708,18 @@ void FOOTPRINT_EDIT_FRAME::Transform( MODULE* module, int transform )
 
         for( ; pad != NULL; pad = (D_PAD*) pad->Next() )
         {
-            pad->m_Pos0    = FROM_LEGACY_LU_VEC( pad->m_Pos );
+            pad->m_Pos0    = pad->m_Pos;
             pad->m_Orient -= angle;
             wxPoint of;
-            of.x = TO_LEGACY_LU( pad->m_Offset.x );
-            of.y = TO_LEGACY_LU( pad->m_Offset.y );
+            of.x = TO_LEGACY_LU( pad->m_Offset.x() );
+            of.y = TO_LEGACY_LU( pad->m_Offset.y() );
             RotatePoint( &of.x, &of.y, angle );
-            pad->m_Offset.x = FROM_LEGACY_LU( of.x );
-            pad->m_Offset.y = FROM_LEGACY_LU( of.y );
-            EXCHG( pad->m_Size.x, pad->m_Size.y );
+            pad->m_Offset.x() = FROM_LEGACY_LU( of.x );
+            pad->m_Offset.y() = FROM_LEGACY_LU( of.y );
+            EXCHG( pad->m_Size.x(), pad->m_Size.y() );
 	    wxSize delta = TO_LEGACY_LU_WXS( pad->m_DeltaSize );
             RotatePoint( &delta.x, &delta.y, -angle );
-	    pad->m_DeltaSize = VECTOR_PCB( FROM_LEGACY_LU( delta.x ), FROM_LEGACY_LU( delta.y ) );
+	    pad->m_DeltaSize = VECTOR_PCB::fromXY( FROM_LEGACY_LU( delta.x ), FROM_LEGACY_LU( delta.y ) );
         }
 
         module->m_Reference->m_Pos0    = module->m_Reference->m_Pos;
@@ -756,10 +756,10 @@ void FOOTPRINT_EDIT_FRAME::Transform( MODULE* module, int transform )
     case ID_MODEDIT_MODULE_MIRROR:
         for( ; pad != NULL; pad = (D_PAD*) pad->Next() )
         {
-            NEGATE( pad->m_Pos.y );
-            NEGATE( pad->m_Pos0.y );
-            NEGATE( pad->m_Offset.y );
-            NEGATE( pad->m_DeltaSize.y );
+            NEGATE( pad->m_Pos.y() );
+            NEGATE( pad->m_Pos0.y() );
+            NEGATE( pad->m_Offset.y() );
+            NEGATE( pad->m_DeltaSize.y() );
 
             if( pad->m_Orient )
                 pad->m_Orient = 3600 - pad->m_Orient;

pcbnew/move-drag_pads.cpp

@@ -23,7 +23,7 @@
 
 
 static D_PAD*  s_CurrentSelectedPad;
-static wxPoint Pad_OldPos;
+static VECTOR_PCB Pad_OldPos;
 
 
 /* Cancel move pad command.
@@ -76,7 +76,7 @@ static void Show_Pad_Move( EDA_DRAW_PANEL* aPanel, wxDC* aDC, const wxPoint& aPo
     if( aErase )
         pad->Draw( aPanel, aDC, GR_XOR );
 
-    pad->m_Pos = screen->GetCrossHairPosition();
+    pad->m_Pos = FROM_LEGACY_LU_VEC( screen->GetCrossHairPosition() );
     pad->Draw( aPanel, aDC, GR_XOR );
 
     if( !g_Drag_Pistes_On )
@@ -91,12 +91,12 @@ static void Show_Pad_Move( EDA_DRAW_PANEL* aPanel, wxDC* aDC, const wxPoint& aPo
 
         if( g_DragSegmentList[ii].m_Pad_Start )
         {
-            Track->m_Start = pad->m_Pos;
+            Track->m_Start = TO_LEGACY_LU_WXP( pad->m_Pos );
         }
 
         if( g_DragSegmentList[ii].m_Pad_End )
         {
-            Track->m_End = pad->m_Pos;
+            Track->m_End = TO_LEGACY_LU_WXP( pad->m_Pos );
         }
 
         Track->Draw( aPanel, aDC, GR_XOR );
@@ -148,7 +148,7 @@ void PCB_BASE_FRAME::Import_Pad_Settings( D_PAD* aPad, bool aDraw )
     aPad->m_Orient = g_Pad_Master.m_Orient +
                      ( (MODULE*) aPad->GetParent() )->m_Orient;
     aPad->m_Size = g_Pad_Master.m_Size;
-    aPad->m_DeltaSize  = VECTOR_PCB( ZERO_LENGTH, ZERO_LENGTH );//wxSize( 0, 0 );
+    aPad->m_DeltaSize  = VECTOR_PCB::fromXY( ZERO_LENGTH, ZERO_LENGTH );//wxSize( 0, 0 );
     aPad->m_Offset     = g_Pad_Master.m_Offset;
     aPad->m_Drill      = g_Pad_Master.m_Drill;
     aPad->m_DrillShape = g_Pad_Master.m_DrillShape;
@@ -160,7 +160,7 @@ void PCB_BASE_FRAME::Import_Pad_Settings( D_PAD* aPad, bool aDraw )
         break;
 
     case PAD_CIRCLE:
-        aPad->m_Size.y = aPad->m_Size.x;
+        aPad->m_Size.y() = aPad->m_Size.x();
         break;
     }
 
@@ -168,8 +168,8 @@ void PCB_BASE_FRAME::Import_Pad_Settings( D_PAD* aPad, bool aDraw )
     {
     case PAD_SMD:
     case PAD_CONN:
-        aPad->m_Drill    = VECTOR_PCB( ZERO_LENGTH, ZERO_LENGTH ); //wxSize( 0, 0 );
-        aPad->m_Offset   = VECTOR_PCB( ZERO_LENGTH, ZERO_LENGTH );
+        aPad->m_Drill    = VECTOR_PCB::fromXY( ZERO_LENGTH, ZERO_LENGTH ); //wxSize( 0, 0 );
+        aPad->m_Offset   = VECTOR_PCB::fromXY( ZERO_LENGTH, ZERO_LENGTH );
     }
 
     aPad->ComputeShapeMaxRadius();
@@ -200,11 +200,11 @@ void PCB_BASE_FRAME::AddPad( MODULE* Module, bool draw )
     Import_Pad_Settings( Pad, false );
     Pad->SetNetname( wxEmptyString );
 
-    Pad->m_Pos = GetScreen()->GetCrossHairPosition();
+    Pad->m_Pos = FROM_LEGACY_LU_VEC( GetScreen()->GetCrossHairPosition() );
 
     // Set the relative pad position
     // ( pad position for module orient, 0, and relative to the module position)
-    Pad->m_Pos0 = FROM_LEGACY_LU_VEC( Pad->m_Pos - Module->m_Pos );
+    Pad->m_Pos0 = Pad->m_Pos - FROM_LEGACY_LU_VEC( Module->m_Pos );
     wxPoint p = TO_LEGACY_LU_WXP( Pad->m_Pos0 );
     RotatePoint( &p, -Module->m_Orient );
     Pad->m_Pos0 = FROM_LEGACY_LU_VEC( p );
@@ -317,17 +317,17 @@ void PCB_BASE_FRAME::PlacePad( D_PAD* Pad, wxDC* DC )
 
         // Set the old state
         if( g_DragSegmentList[ii].m_Pad_Start )
-            Track->m_Start = Pad_OldPos;
+            Track->m_Start = TO_LEGACY_LU_WXP( Pad_OldPos );
 
         if( g_DragSegmentList[ii].m_Pad_End )
-            Track->m_End = Pad_OldPos;
+            Track->m_End = TO_LEGACY_LU_WXP( Pad_OldPos );
 
         picker.m_PickedItem = Track;
         pickList.PushItem( picker );
     }
 
     /* Save old module and old items values */
-    wxPoint pad_curr_position = Pad->m_Pos;
+    wxPoint pad_curr_position = TO_LEGACY_LU_WXP( Pad->m_Pos );
 
     Pad->m_Pos = Pad_OldPos;
 
@@ -340,7 +340,7 @@ void PCB_BASE_FRAME::PlacePad( D_PAD* Pad, wxDC* DC )
         SaveCopyInUndoList( pickList, UR_CHANGED );
     }
 
-    Pad->m_Pos = pad_curr_position;
+    Pad->m_Pos = FROM_LEGACY_LU_VEC( pad_curr_position );
     Pad->Draw( DrawPanel, DC, GR_XOR );
 
     /* Redraw dragged track segments */
@@ -350,10 +350,10 @@ void PCB_BASE_FRAME::PlacePad( D_PAD* Pad, wxDC* DC )
 
         // Set the new state
         if( g_DragSegmentList[ii].m_Pad_Start )
-            Track->m_Start = Pad->m_Pos;
+            Track->m_Start = TO_LEGACY_LU_WXP( Pad->m_Pos );
 
         if( g_DragSegmentList[ii].m_Pad_End )
-            Track->m_End = Pad->m_Pos;
+            Track->m_End = TO_LEGACY_LU_WXP( Pad->m_Pos );
 
         Track->SetState( IN_EDIT, OFF );
 
@@ -362,12 +362,12 @@ void PCB_BASE_FRAME::PlacePad( D_PAD* Pad, wxDC* DC )
     }
 
     /* Compute local coordinates (i.e refer to Module position and for Module orient = 0) */
-    dX = Pad->m_Pos.x - Pad_OldPos.x;
-    dY = Pad->m_Pos.y - Pad_OldPos.y;
+    dX = TO_LEGACY_LU( Pad->m_Pos.x() - Pad_OldPos.x() );
+    dY = TO_LEGACY_LU( Pad->m_Pos.y() - Pad_OldPos.y() );
     RotatePoint( &dX, &dY, -Module->m_Orient );
 
-    Pad->m_Pos0.x += FROM_LEGACY_LU( dX );
-    s_CurrentSelectedPad->m_Pos0.y += FROM_LEGACY_LU( dY ); /// @BUG???
+    Pad->m_Pos0.x() += FROM_LEGACY_LU( dX );
+    s_CurrentSelectedPad->m_Pos0.y() += FROM_LEGACY_LU( dY ); /// @BUG???
 
     Pad->m_Flags = 0;
 
@@ -402,13 +402,13 @@ void PCB_BASE_FRAME::RotatePad( D_PAD* Pad, wxDC* DC )
     if( DC )
         Module->Draw( DrawPanel, DC, GR_XOR );
 
-    EXCHG( Pad->m_Size.x, Pad->m_Size.y );
-    EXCHG( Pad->m_Drill.x, Pad->m_Drill.y );
-    EXCHG( Pad->m_Offset.x, Pad->m_Offset.y );
-    Pad->m_Offset.y = -Pad->m_Offset.y;
+    EXCHG( Pad->m_Size.x(), Pad->m_Size.y() );
+    EXCHG( Pad->m_Drill.x(), Pad->m_Drill.y() );
+    EXCHG( Pad->m_Offset.x(), Pad->m_Offset.y() );
+    Pad->m_Offset.y() = -Pad->m_Offset.y();
 
-    EXCHG( Pad->m_DeltaSize.x, Pad->m_DeltaSize.y );
-    Pad->m_DeltaSize.x = -Pad->m_DeltaSize.x;
+    EXCHG( Pad->m_DeltaSize.x(), Pad->m_DeltaSize.y() );
+    Pad->m_DeltaSize.x() = -Pad->m_DeltaSize.x();
     Module->CalculateBoundingBox();
     Pad->DisplayInfo( this );
 

pcbnew/muonde.cpp

@@ -260,9 +260,9 @@ MODULE* PCB_EDIT_FRAME::Genere_Self( wxDC* DC )
     Module->m_Pads.PushFront( PtPad );
 
     PtPad->SetPadName( wxT( "1" ) );
-    PtPad->m_Pos    = Mself.m_End;
-    PtPad->m_Pos0   = FROM_LEGACY_LU_VEC( PtPad->m_Pos - Module->m_Pos );
-    PtPad->m_Size.x = PtPad->m_Size.y = FROM_LEGACY_LU( Mself.m_Width );
+    PtPad->m_Pos          = FROM_LEGACY_LU_VEC( Mself.m_End );
+    PtPad->m_Pos0         = PtPad->m_Pos - FROM_LEGACY_LU_VEC( Module->m_Pos );
+    PtPad->m_Size.x()     = PtPad->m_Size.y() = FROM_LEGACY_LU( Mself.m_Width );
     PtPad->m_layerMask    = g_TabOneLayerMask[Module->GetLayer()];
     PtPad->m_Attribut     = PAD_SMD;
     PtPad->m_PadShape     = PAD_CIRCLE;
@@ -275,8 +275,8 @@ MODULE* PCB_EDIT_FRAME::Genere_Self( wxDC* DC )
 
     PtPad = newpad;
     PtPad->SetPadName( wxT( "2" ) );
-    PtPad->m_Pos  = Mself.m_Start;
-    PtPad->m_Pos0 = FROM_LEGACY_LU_VEC( PtPad->m_Pos - Module->m_Pos );
+    PtPad->m_Pos  = FROM_LEGACY_LU_VEC( Mself.m_Start );
+    PtPad->m_Pos0 = PtPad->m_Pos - FROM_LEGACY_LU_VEC( Module->m_Pos );
 
     /* Modify text positions. */
     Module->DisplayInfo( this );
@@ -552,8 +552,8 @@ MODULE* PCB_EDIT_FRAME::Create_MuWaveBasicShape( const wxString& name, int pad_c
 
         Module->m_Pads.PushFront( pad );
 
-        pad->m_Size.x    = pad->m_Size.y = FROM_LEGACY_LU( GetBoard()->GetCurrentTrackWidth() );
-        pad->m_Pos       = Module->m_Pos;
+        pad->m_Size.x()  = pad->m_Size.y() = FROM_LEGACY_LU( GetBoard()->GetCurrentTrackWidth() );
+        pad->m_Pos       = FROM_LEGACY_LU_VEC( Module->m_Pos );
         pad->m_PadShape  = PAD_RECT;
         pad->m_Attribut  = PAD_SMD;
         pad->m_layerMask = LAYER_FRONT;
@@ -656,19 +656,19 @@ MODULE* PCB_EDIT_FRAME::Create_MuWaveComponent( int shape_type )
     switch( shape_type )
     {
     case 0:     //Gap :
-        pad->m_Pos0.x = FROM_LEGACY_LU( oX = -( gap_size + TO_LEGACY_LU( pad->m_Size.x ) ) / 2 );
-        pad->m_Pos.x += TO_LEGACY_LU( pad->m_Pos0.x );
+        pad->m_Pos0.x() = FROM_LEGACY_LU( oX = -( gap_size + TO_LEGACY_LU( pad->m_Size.x() ) ) / 2 );
+        pad->m_Pos.x() += pad->m_Pos0.x();
         pad = pad->Next();
-        pad->m_Pos0.x = FROM_LEGACY_LU( oX + gap_size + TO_LEGACY_LU( pad->m_Size.x ) );
-        pad->m_Pos.x += TO_LEGACY_LU( pad->m_Pos0.x );
+        pad->m_Pos0.x() = FROM_LEGACY_LU( oX + gap_size + TO_LEGACY_LU( pad->m_Size.x() ) );
+        pad->m_Pos.x() += pad->m_Pos0.x();
         break;
 
     case 1:     //Stub :
         pad->SetPadName( wxT( "1" ) );
         pad = pad->Next();
-        pad->m_Pos0.y = FROM_LEGACY_LU( -( gap_size + TO_LEGACY_LU( pad->m_Size.y ) ) / 2 );
-        pad->m_Size.y = FROM_LEGACY_LU( gap_size );
-        pad->m_Pos.y += TO_LEGACY_LU( pad->m_Pos0.y );
+        pad->m_Pos0.y()  = FROM_LEGACY_LU( -( gap_size + TO_LEGACY_LU( pad->m_Size.y() ) ) / 2 );
+        pad->m_Size.y()  = FROM_LEGACY_LU( gap_size );
+        pad->m_Pos.y()  += pad->m_Pos0.y();
         break;
 
     case 2:     // Arc Stub created by a polygonal approach:
@@ -683,7 +683,7 @@ MODULE* PCB_EDIT_FRAME::Create_MuWaveComponent( int shape_type )
         std::vector<wxPoint> polyPoints = edge->GetPolyPoints();
         polyPoints.reserve( numPoints );
 
-        edge->m_Start0.y = TO_LEGACY_LU( -pad->m_Size.y / 2 );
+        edge->m_Start0.y = TO_LEGACY_LU( -pad->m_Size.y() / 2 );
 
         polyPoints.push_back( wxPoint( 0, 0 ) );
 
@@ -968,12 +968,12 @@ MODULE* PCB_EDIT_FRAME::Create_MuWavePolygonShape()
     Module = Create_MuWaveBasicShape( cmp_name, pad_count );
     pad1   = Module->m_Pads;
 
-    pad1->m_Pos0.x = FROM_LEGACY_LU( -ShapeSize.x / 2 );
-    pad1->m_Pos.x += TO_LEGACY_LU( pad1->m_Pos0.x );
+    pad1->m_Pos0.x()  = FROM_LEGACY_LU( -ShapeSize.x / 2 );
+    pad1->m_Pos.x()  += pad1->m_Pos0.x();
 
     pad2 = (D_PAD*) pad1->Next();
-    pad2->m_Pos0.x = pad1->m_Pos0.x + FROM_LEGACY_LU( ShapeSize.x );
-    pad2->m_Pos.x += TO_LEGACY_LU( pad2->m_Pos0.x );
+    pad2->m_Pos0.x()  = pad1->m_Pos0.x() + FROM_LEGACY_LU( ShapeSize.x );
+    pad2->m_Pos.x()  += pad2->m_Pos0.x();
 
     edge = new EDGE_MODULE( Module );
 
@@ -987,13 +987,13 @@ MODULE* PCB_EDIT_FRAME::Create_MuWavePolygonShape()
     polyPoints.reserve( 2 * PolyEdges.size() + 2 );
 
     // Init start point coord:
-    polyPoints.push_back( wxPoint( TO_LEGACY_LU( pad1->m_Pos0.x ), 0 ) );
+    polyPoints.push_back( wxPoint( TO_LEGACY_LU( pad1->m_Pos0.x() ), 0 ) );
 
     wxPoint first_coordinate, last_coordinate;
 
     for( ii = 0; ii < PolyEdges.size(); ii++ )  // Copy points
     {
-        last_coordinate.x = wxRound( PolyEdges[ii] * ShapeScaleX ) + TO_LEGACY_LU( pad1->m_Pos0.x );
+        last_coordinate.x = wxRound( PolyEdges[ii] * ShapeScaleX ) + TO_LEGACY_LU( pad1->m_Pos0.x() );
         last_coordinate.y = -wxRound( PolyEdges[ii] * ShapeScaleY );
         polyPoints.push_back( last_coordinate );
     }
@@ -1005,15 +1005,15 @@ MODULE* PCB_EDIT_FRAME::Create_MuWavePolygonShape()
     case 0:     // Single
     case 2:     // Single mirrored
         // Init end point coord:
-        pad2->m_Pos0.x = FROM_LEGACY_LU( last_coordinate.x );
+        pad2->m_Pos0.x() = FROM_LEGACY_LU( last_coordinate.x );
         polyPoints.push_back( wxPoint( last_coordinate.x, 0 ) );
 
-        pad1->m_Size.x = pad1->m_Size.y = FROM_LEGACY_LU( ABS( first_coordinate.y ) );
-        pad2->m_Size.x = pad2->m_Size.y = FROM_LEGACY_LU( ABS( last_coordinate.y ) );
-        pad1->m_Pos0.y = FROM_LEGACY_LU( first_coordinate.y / 2 );
-        pad2->m_Pos0.y = FROM_LEGACY_LU( last_coordinate.y / 2 );
-        pad1->m_Pos.y  = TO_LEGACY_LU( pad1->m_Pos0.y ) + Module->m_Pos.y;
-        pad2->m_Pos.y  = TO_LEGACY_LU( pad2->m_Pos0.y ) + Module->m_Pos.y;
+        pad1->m_Size.x() = pad1->m_Size.y() = FROM_LEGACY_LU( abs( first_coordinate.y ) );
+        pad2->m_Size.x() = pad2->m_Size.y() = FROM_LEGACY_LU( abs( last_coordinate.y ) );
+        pad1->m_Pos0.y() = FROM_LEGACY_LU( first_coordinate.y / 2 );
+        pad2->m_Pos0.y() = FROM_LEGACY_LU( last_coordinate.y / 2 );
+        pad1->m_Pos.y()  = pad1->m_Pos0.y() + FROM_LEGACY_LU( Module->m_Pos.y );
+        pad2->m_Pos.y()  = pad2->m_Pos0.y() + FROM_LEGACY_LU( Module->m_Pos.y );
         break;
 
     case 1:     // Symmetric
@@ -1026,8 +1026,8 @@ MODULE* PCB_EDIT_FRAME::Create_MuWavePolygonShape()
             polyPoints.push_back( pt );
         }
 
-        pad1->m_Size.x = pad1->m_Size.y = FROM_LEGACY_LU( 2 * ABS( first_coordinate.y ) );
-        pad2->m_Size.x = pad2->m_Size.y = FROM_LEGACY_LU( 2 * ABS( last_coordinate.y ) );
+        pad1->m_Size.x() = pad1->m_Size.y() = FROM_LEGACY_LU( 2 * abs( first_coordinate.y ) );
+        pad2->m_Size.x() = pad2->m_Size.y() = FROM_LEGACY_LU( 2 * abs( last_coordinate.y ) );
         break;
     }
 
@@ -1073,7 +1073,7 @@ void PCB_EDIT_FRAME::Edit_Gap( wxDC* DC, MODULE* Module )
     Module->Draw( DrawPanel, DC, GR_XOR );
 
     /* Calculate the current dimension. */
-    gap_size = TO_LEGACY_LU( next_pad->m_Pos0.x - pad->m_Pos0.x - pad->m_Size.x );
+    gap_size = TO_LEGACY_LU( next_pad->m_Pos0.x() - pad->m_Pos0.x() - pad->m_Size.x() );
 
     /* Entrer the desired length of the gap. */
     msg = ReturnStringFromValue( g_UserUnit, gap_size, GetScreen()->GetInternalUnits() );
@@ -1086,21 +1086,25 @@ void PCB_EDIT_FRAME::Edit_Gap( wxDC* DC, MODULE* Module )
     gap_size = ReturnValueFromString( g_UserUnit, msg, GetScreen()->GetInternalUnits() );
 
     /* Updating sizes of pads forming the gap. */
-    pad->m_Size.x = pad->m_Size.y = FROM_LEGACY_LU( GetBoard()->GetCurrentTrackWidth() );
-    pad->m_Pos0.y = ZERO_LENGTH;
-    pad->m_Pos0.x = FROM_LEGACY_LU( oX = -( ( gap_size + TO_LEGACY_LU( pad->m_Size.x ) ) / 2 ) );
-    pad->m_Pos.x = TO_LEGACY_LU( pad->m_Pos0.x ) + Module->m_Pos.x;
-    pad->m_Pos.y = TO_LEGACY_LU( pad->m_Pos0.y ) + Module->m_Pos.y;
-    RotatePoint( &pad->m_Pos.x, &pad->m_Pos.y,
+    pad->m_Size.x() = pad->m_Size.y() = FROM_LEGACY_LU( GetBoard()->GetCurrentTrackWidth() );
+    pad->m_Pos0.y() = ZERO_LENGTH;
+    pad->m_Pos0.x() = FROM_LEGACY_LU( oX = -( ( gap_size + TO_LEGACY_LU( pad->m_Size.x() ) ) / 2 ) );
+    pad->m_Pos.x()  = pad->m_Pos0.x() + FROM_LEGACY_LU( Module->m_Pos.x );
+    pad->m_Pos.y()  = pad->m_Pos0.y() + FROM_LEGACY_LU( Module->m_Pos.y );
+
+    wxPoint pos = TO_LEGACY_LU_WXP( pad->m_Pos );
+    RotatePoint( &pos.x, &pos.y,
                  Module->m_Pos.x, Module->m_Pos.y, Module->m_Orient );
-
-    next_pad->m_Size.x = next_pad->m_Size.y = FROM_LEGACY_LU( GetBoard()->GetCurrentTrackWidth() );
-    next_pad->m_Pos0.y = ZERO_LENGTH;
-    next_pad->m_Pos0.x = FROM_LEGACY_LU( oX + gap_size + TO_LEGACY_LU( next_pad->m_Size.x ) );
-    next_pad->m_Pos.x  = TO_LEGACY_LU( next_pad->m_Pos0.x ) + Module->m_Pos.x;
-    next_pad->m_Pos.y  = TO_LEGACY_LU( next_pad->m_Pos0.y ) + Module->m_Pos.y;
-    RotatePoint( &next_pad->m_Pos.x, &next_pad->m_Pos.y,
+    pad->m_Pos = FROM_LEGACY_LU_VEC( pos );
+    next_pad->m_Size.x() = next_pad->m_Size.y() = FROM_LEGACY_LU( GetBoard()->GetCurrentTrackWidth() );
+    next_pad->m_Pos0.y() = ZERO_LENGTH;
+    next_pad->m_Pos0.x() = FROM_LEGACY_LU( oX + gap_size + TO_LEGACY_LU( next_pad->m_Size.x() ) );
+    next_pad->m_Pos.x()  = next_pad->m_Pos0.x() + FROM_LEGACY_LU( Module->m_Pos.x );
+    next_pad->m_Pos.y()  = next_pad->m_Pos0.y() + FROM_LEGACY_LU( Module->m_Pos.y );
+    pos = TO_LEGACY_LU_WXP( next_pad->m_Pos );
+    RotatePoint( &pos.x, &pos.y,
                  Module->m_Pos.x, Module->m_Pos.y, Module->m_Orient );
+    next_pad->m_Pos = FROM_LEGACY_LU_VEC( pos );
 
     Module->Draw( DrawPanel, DC, GR_OR );
 }

pcbnew/pcbnew_config.cpp

@@ -217,16 +217,25 @@ PARAM_CFG_ARRAY& PCB_EDIT_FRAME::GetProjectFileParameters()
     m_projectFileParams.push_back( new PARAM_CFG_LIBNAME_LIST( wxT( "LibName" ),
                                                                &g_LibraryNames,
                                                                GROUPLIB ) );
-#ifdef KICAD_NANOMETRE
+//#ifdef KICAD_NANOMETRE
 /* TODO: something should be done here!!! */
-#else
-    m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "PadDrlX" ), &g_Pad_Master.m_Drill.x,
-                                                      320, 0, 0x7FFF ) );
-    m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "PadDimH" ), &g_Pad_Master.m_Size.x,
-                                                      550, 0, 0x7FFF ) );
-    m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "PadDimV" ), &g_Pad_Master.m_Size.y,
-                                                      550, 0, 0x7FFF ) );
-#endif
+//#else
+    m_projectFileParams.push_back( new PARAM_CFG_LENGTH_PCB( wxT( "PadDrlX" ),
+                                                             &g_Pad_Master.m_Drill.x(),
+                                                             FROM_LEGACY_LU( 320 ),
+                                                             ZERO_LENGTH,
+                                                             FROM_LEGACY_LU( 0x7FFF ) ) );
+    m_projectFileParams.push_back( new PARAM_CFG_LENGTH_PCB( wxT( "PadDimH" ),
+                                                             &g_Pad_Master.m_Size.x(),
+                                                             FROM_LEGACY_LU( 550 ),
+                                                             ZERO_LENGTH,
+                                                             FROM_LEGACY_LU( 0x7FFF ) ) );
+    m_projectFileParams.push_back( new PARAM_CFG_LENGTH_PCB( wxT( "PadDimV" ),
+                                                             &g_Pad_Master.m_Size.y(),
+                                                             FROM_LEGACY_LU( 550 ),
+                                                             ZERO_LENGTH,
+                                                             FROM_LEGACY_LU( 0x7FFF ) ) );
+//#endif
     m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "BoardThickness" ),
                                                       &boardDesignSettings.m_BoardThickness,
                                                       630, 0, 0xFFFF ) );

pcbnew/plot_rtn.cpp

@@ -97,7 +97,7 @@ void PCB_BASE_FRAME::PlotSilkScreen( PLOTTER* plotter, int aLayerMask, GRTraceMo
                 switch( pad->m_PadShape & 0x7F )
                 {
                 case PAD_CIRCLE:
-                    plotter->flash_pad_circle( shape_pos, TO_LEGACY_LU( pad->m_Size.x ), FILAIRE );
+                    plotter->flash_pad_circle( shape_pos, TO_LEGACY_LU( pad->m_Size.x() ), FILAIRE );
                     break;
 
                 case PAD_OVAL:
@@ -840,8 +840,8 @@ void PCB_BASE_FRAME::Plot_Standard_Layer( PLOTTER*    aPlotter,
                 break;
             }
 
-            size.x = TO_LEGACY_LU( pad->m_Size.x ) + ( 2 * margin.x );
-            size.y = TO_LEGACY_LU( pad->m_Size.y ) + ( 2 * margin.y );
+            size.x = TO_LEGACY_LU( pad->m_Size.x() ) + ( 2 * margin.x );
+            size.y = TO_LEGACY_LU( pad->m_Size.y() ) + ( 2 * margin.y );
 
             /* Don't draw a null size item : */
             if( size.x <= 0 || size.y <= 0 )
@@ -851,8 +851,8 @@ void PCB_BASE_FRAME::Plot_Standard_Layer( PLOTTER*    aPlotter,
             {
             case PAD_CIRCLE:
                 if( aSkipNPTH_Pads &&
-                    ( pad->m_Size.x == pad->m_Drill.x ) &&
-                    ( pad->m_Size.y == pad->m_Drill.y ) &&
+                    ( pad->m_Size.x() == pad->m_Drill.x() ) &&
+                    ( pad->m_Size.y() == pad->m_Drill.y() ) &&
                     (pad->m_Attribut == PAD_HOLE_NOT_PLATED) )
                     break;
 
@@ -861,8 +861,8 @@ void PCB_BASE_FRAME::Plot_Standard_Layer( PLOTTER*    aPlotter,
 
             case PAD_OVAL:
                 if( aSkipNPTH_Pads &&
-                    (pad->m_Size.x == pad->m_Drill.x ) &&
-                    (pad->m_Size.y == pad->m_Drill.y ) &&
+                    (pad->m_Size.x() == pad->m_Drill.x() ) &&
+                    (pad->m_Size.y() == pad->m_Drill.y() ) &&
                     (pad->m_Attribut == PAD_HOLE_NOT_PLATED) )
                     break;
 
@@ -1018,21 +1018,21 @@ void PCB_BASE_FRAME::PlotDrillMark( PLOTTER*    aPlotter,
     {
         for( PtPad = Module->m_Pads; PtPad != NULL; PtPad = PtPad->Next() )
         {
-            if( PtPad->m_Drill.x == ZERO_LENGTH )
+            if( PtPad->m_Drill.x() == ZERO_LENGTH )
                 continue;
 
             // Output hole shapes:
-            pos = PtPad->m_Pos;
+            pos = TO_LEGACY_LU_WXP( PtPad->m_Pos );
 
             if( PtPad->m_DrillShape == PAD_OVAL )
             {
-                diam.x = TO_LEGACY_LU( PtPad->m_Drill.x );
-                diam.y = TO_LEGACY_LU( PtPad->m_Drill.y );
+                diam.x = TO_LEGACY_LU( PtPad->m_Drill.x() );
+                diam.y = TO_LEGACY_LU( PtPad->m_Drill.y() );
                 aPlotter->flash_pad_oval( pos, diam, PtPad->m_Orient, aTraceMode );
             }
             else
             {
-                diam.x = aSmallDrillShape ? SMALL_DRILL : TO_LEGACY_LU( PtPad->m_Drill.x );
+                diam.x = aSmallDrillShape ? SMALL_DRILL : TO_LEGACY_LU( PtPad->m_Drill.x() );
                 aPlotter->flash_pad_circle( pos, diam.x, aTraceMode );
             }
         }

pcbnew/print_board_functions.cpp

@@ -352,17 +352,17 @@ static void Print_Module( EDA_DRAW_PANEL* aPanel, wxDC* aDC, MODULE* aModule,
 
         // Manage hole according to the print drill option
         wxSize drill_tmp;
-        drill_tmp.x = TO_LEGACY_LU( pt_pad->m_Drill.x );
-        drill_tmp.y = TO_LEGACY_LU( pt_pad->m_Drill.y );
+        drill_tmp.x = TO_LEGACY_LU( pt_pad->m_Drill.x() );
+        drill_tmp.y = TO_LEGACY_LU( pt_pad->m_Drill.y() );
 
         switch ( aDrillShapeOpt )
         {
             case PRINT_PARAMETERS::NO_DRILL_SHAPE:
-                pt_pad->m_Drill = VECTOR_PCB(ZERO_LENGTH, ZERO_LENGTH); //wxSize(0,0);
+                pt_pad->m_Drill = VECTOR_PCB::fromXY(ZERO_LENGTH, ZERO_LENGTH); //wxSize(0,0);
                 break;
             case PRINT_PARAMETERS::SMALL_DRILL_SHAPE:
-                pt_pad->m_Drill.x = MIN(FROM_LEGACY_LU( SMALL_DRILL ),pt_pad->m_Drill.x );
-                pt_pad->m_Drill.y = MIN(FROM_LEGACY_LU( SMALL_DRILL ),pt_pad->m_Drill.y );
+                pt_pad->m_Drill.x() = min( FROM_LEGACY_LU( SMALL_DRILL ),pt_pad->m_Drill.x() );
+                pt_pad->m_Drill.y() = min( FROM_LEGACY_LU( SMALL_DRILL ),pt_pad->m_Drill.y() );
                 break;
             case PRINT_PARAMETERS::FULL_DRILL_SHAPE:
                 // Do nothing
@@ -370,8 +370,8 @@ static void Print_Module( EDA_DRAW_PANEL* aPanel, wxDC* aDC, MODULE* aModule,
         }
 
         pt_pad->Draw( aPanel, aDC, aDraw_mode );
-        pt_pad->m_Drill.x = FROM_LEGACY_LU( drill_tmp.x );
-        pt_pad->m_Drill.y = FROM_LEGACY_LU( drill_tmp.y );
+        pt_pad->m_Drill.x() = FROM_LEGACY_LU( drill_tmp.x );
+        pt_pad->m_Drill.y() = FROM_LEGACY_LU( drill_tmp.y );
     }
 
     /* Print footprint graphic shapes */

pcbnew/ratsnest.cpp

@@ -107,8 +107,8 @@ int MIN_SPAN_TREE_PADS::GetWeight( int aItem1, int aItem2 )
 
     if( pad1 == pad2 )
         return 0;
-    int weight = abs( pad2->m_Pos.x - pad1->m_Pos.x ) +
-                 abs( pad2->m_Pos.y - pad1->m_Pos.y );
+    int weight = TO_LEGACY_LU( abs( pad2->m_Pos.x() - pad1->m_Pos.x() ) +
+                 abs( pad2->m_Pos.y() - pad1->m_Pos.y() ) );
     return weight + 1;
 }
 
@@ -667,7 +667,7 @@ void PCB_BASE_FRAME::build_ratsnest_module( MODULE* aModule )
             local_rats.m_Lenght = INT_MAX;
         }
 
-        pad_pos = pad_ref->m_Pos - g_Offset_Module;
+        pad_pos = TO_LEGACY_LU_WXP( pad_ref->m_Pos ) - g_Offset_Module;
 
         // Search the nearest external pad of this current pad
         for( unsigned jj = pads_module_count; jj < localPadList.size(); jj++ )
@@ -681,8 +681,8 @@ void PCB_BASE_FRAME::build_ratsnest_module( MODULE* aModule )
             if( pad_externe->GetNet() > pad_ref->GetNet() ) // pads are sorted by net code
                 break;
 
-            distance = abs( pad_externe->m_Pos.x - pad_pos.x ) +
-                       abs( pad_externe->m_Pos.y - pad_pos.y );
+            distance = abs( TO_LEGACY_LU( pad_externe->m_Pos.x() ) - pad_pos.x ) +
+                       abs( TO_LEGACY_LU( pad_externe->m_Pos.y() ) - pad_pos.y );
 
             if( distance < local_rats.m_Lenght )
             {
@@ -724,8 +724,8 @@ void PCB_BASE_FRAME::TraceModuleRatsNest( wxDC* DC )
         else
         {
             g_ColorsSettings.SetItemColor(RATSNEST_VISIBLE, tmpcolor);
-            wxPoint tmp = rats->m_PadStart->m_Pos;
-            rats->m_PadStart->m_Pos -= g_Offset_Module;
+            VECTOR_PCB tmp = rats->m_PadStart->m_Pos;
+            rats->m_PadStart->m_Pos -= FROM_LEGACY_LU_VEC( g_Offset_Module );
             rats->Draw( DrawPanel, DC, GR_XOR, wxPoint( 0, 0 ) );
             rats->m_PadStart->m_Pos = tmp;
         }
@@ -827,7 +827,7 @@ void PCB_BASE_FRAME::BuildAirWiresTargetsList( BOARD_CONNECTED_ITEM* aItemRef,
                 continue;
 
             if( !pad->GetSubNet() || (pad->GetSubNet() != subnet) )
-                s_TargetsLocations.push_back( pad->m_Pos );
+                s_TargetsLocations.push_back( TO_LEGACY_LU_WXP( pad->m_Pos ) );
         }
 
         // Create a list of tracks ends candidates, not already connected to the

pcbnew/solve.cpp

@@ -464,8 +464,8 @@ static int Autoroute_One_Track( PCB_EDIT_FRAME* pcbframe,
                  + pcbframe->GetBoard()->m_BoundaryBox.m_Pos.x;
         int cY = ( Board.m_GridRouting * row_source )
                  + pcbframe->GetBoard()->m_BoundaryBox.m_Pos.y;
-        int dx = TO_LEGACY_LU( pt_cur_ch->m_PadStart->m_Size.x / 2 );
-        int dy = TO_LEGACY_LU( pt_cur_ch->m_PadStart->m_Size.y / 2 );
+        int dx = TO_LEGACY_LU( pt_cur_ch->m_PadStart->m_Size.x() / 2 );
+        int dy = TO_LEGACY_LU( pt_cur_ch->m_PadStart->m_Size.y() / 2 );
         int px = pt_cur_ch->m_PadStart->GetPosition().x;
         int py = pt_cur_ch->m_PadStart->GetPosition().y;
 
@@ -479,8 +479,8 @@ static int Autoroute_One_Track( PCB_EDIT_FRAME* pcbframe,
              + pcbframe->GetBoard()->m_BoundaryBox.m_Pos.x;
         cY = ( Board.m_GridRouting * row_target )
              + pcbframe->GetBoard()->m_BoundaryBox.m_Pos.y;
-        dx = TO_LEGACY_LU( pt_cur_ch->m_PadEnd->m_Size.x / 2 );
-        dy = TO_LEGACY_LU( pt_cur_ch->m_PadEnd->m_Size.y / 2 );
+        dx = TO_LEGACY_LU( pt_cur_ch->m_PadEnd->m_Size.x() / 2 );
+        dy = TO_LEGACY_LU( pt_cur_ch->m_PadEnd->m_Size.y() / 2 );
         px = pt_cur_ch->m_PadEnd->GetPosition().x;
         py = pt_cur_ch->m_PadEnd->GetPosition().y;
 

pcbnew/specctra_export.cpp

@@ -250,7 +250,7 @@ static bool isRoundKeepout( D_PAD* aPad )
 {
     if( aPad->m_PadShape==PAD_CIRCLE )
     {
-        if( aPad->m_Drill.x >= aPad->m_Size.x )
+        if( aPad->m_Drill.x() >= aPad->m_Size.x() )
             return true;
 
         if( (aPad->m_layerMask & ALL_CU_LAYERS) == 0 )
@@ -321,11 +321,11 @@ PADSTACK* SPECCTRA_DB::makePADSTACK( BOARD* aBoard, D_PAD* aPad )
 
     POINT   dsnOffset;
 
-    if( aPad->m_Offset.x != ZERO_LENGTH || aPad->m_Offset.y != ZERO_LENGTH )
+    if( aPad->m_Offset.x() != ZERO_LENGTH || aPad->m_Offset.y() != ZERO_LENGTH )
     {
         char offsetTxt[64]; /// @BUG !!!Unsafe
 
-        wxPoint offset( TO_LEGACY_LU( aPad->m_Offset.x ), TO_LEGACY_LU( aPad->m_Offset.y ) );
+        wxPoint offset( TO_LEGACY_LU( aPad->m_Offset.x() ), TO_LEGACY_LU( aPad->m_Offset.y() ) );
 
         dsnOffset = mapPt( offset );
 
@@ -341,7 +341,7 @@ PADSTACK* SPECCTRA_DB::makePADSTACK( BOARD* aBoard, D_PAD* aPad )
     default:
     case PAD_CIRCLE:
         {
-            double  diameter = scale( TO_LEGACY_LU( aPad->m_Size.x ) );
+            double  diameter = scale( TO_LEGACY_LU( aPad->m_Size.x() ) );
 
             for( int ndx=0;  ndx<reportedLayers;  ++ndx )
             {
@@ -357,7 +357,7 @@ PADSTACK* SPECCTRA_DB::makePADSTACK( BOARD* aBoard, D_PAD* aPad )
             }
 
             snprintf( name, sizeof(name), "Round%sPad_%.6g_mil",
-                     uniqifier.c_str(), scale(TO_LEGACY_LU( aPad->m_Size.x ) ) );
+                     uniqifier.c_str(), scale(TO_LEGACY_LU( aPad->m_Size.x() ) ) );
             name[ sizeof(name)-1 ] = 0;
 
             padstack->SetPadstackId( name );
@@ -366,8 +366,8 @@ PADSTACK* SPECCTRA_DB::makePADSTACK( BOARD* aBoard, D_PAD* aPad )
 
     case PAD_RECT:
         {
-            double dx = scale( TO_LEGACY_LU( aPad->m_Size.x ) ) / 2.0;
-            double dy = scale( TO_LEGACY_LU( aPad->m_Size.y ) ) / 2.0;
+            double dx = scale( TO_LEGACY_LU( aPad->m_Size.x() ) ) / 2.0;
+            double dy = scale( TO_LEGACY_LU( aPad->m_Size.y() ) ) / 2.0;
 
             POINT   lowerLeft( -dx, -dy );
             POINT   upperRight( dx, dy );
@@ -388,7 +388,7 @@ PADSTACK* SPECCTRA_DB::makePADSTACK( BOARD* aBoard, D_PAD* aPad )
             }
 
             snprintf( name, sizeof(name),  "Rect%sPad_%.6gx%.6g_mil",
-                     uniqifier.c_str(), scale( TO_LEGACY_LU( aPad->m_Size.x ) ), scale( TO_LEGACY_LU( aPad->m_Size.y ) )  );
+                     uniqifier.c_str(), scale( TO_LEGACY_LU( aPad->m_Size.x() ) ), scale( TO_LEGACY_LU( aPad->m_Size.y() ) )  );
             name[ sizeof(name)-1 ] = 0;
 
             padstack->SetPadstackId( name );
@@ -397,8 +397,8 @@ PADSTACK* SPECCTRA_DB::makePADSTACK( BOARD* aBoard, D_PAD* aPad )
 
     case PAD_OVAL:
         {
-            double  dx = scale( TO_LEGACY_LU( aPad->m_Size.x ) ) / 2.0;
-            double  dy = scale( TO_LEGACY_LU( aPad->m_Size.y ) ) / 2.0;
+            double  dx = scale( TO_LEGACY_LU( aPad->m_Size.x() ) ) / 2.0;
+            double  dy = scale( TO_LEGACY_LU( aPad->m_Size.y() ) ) / 2.0;
             double  dr = dx - dy;
             double  radius;
             POINT   start;
@@ -436,7 +436,7 @@ PADSTACK* SPECCTRA_DB::makePADSTACK( BOARD* aBoard, D_PAD* aPad )
             }
 
             snprintf( name, sizeof(name),  "Oval%sPad_%.6gx%.6g_mil",
-                     uniqifier.c_str(), scale( TO_LEGACY_LU( aPad->m_Size.x ) ), scale( TO_LEGACY_LU( aPad->m_Size.y ) )  );
+                     uniqifier.c_str(), scale( TO_LEGACY_LU( aPad->m_Size.x() ) ), scale( TO_LEGACY_LU( aPad->m_Size.y() ) )  );
             name[ sizeof(name)-1 ] = 0;
 
             padstack->SetPadstackId( name );
@@ -445,11 +445,11 @@ PADSTACK* SPECCTRA_DB::makePADSTACK( BOARD* aBoard, D_PAD* aPad )
 
     case PAD_TRAPEZOID:
         {
-            double dx = scale( TO_LEGACY_LU( aPad->m_Size.x ) ) / 2.0;
-            double dy = scale( TO_LEGACY_LU( aPad->m_Size.y ) ) / 2.0;
+            double dx = scale( TO_LEGACY_LU( aPad->m_Size.x() ) ) / 2.0;
+            double dy = scale( TO_LEGACY_LU( aPad->m_Size.y() ) ) / 2.0;
 
-            double ddx = scale( TO_LEGACY_LU( aPad->m_DeltaSize.x ) ) / 2.0;
-            double ddy = scale( TO_LEGACY_LU( aPad->m_DeltaSize.y ) ) / 2.0;
+            double ddx = scale( TO_LEGACY_LU( aPad->m_DeltaSize.x() ) ) / 2.0;
+            double ddy = scale( TO_LEGACY_LU( aPad->m_DeltaSize.y() ) ) / 2.0;
 
             // see class_pad_draw_functions.cpp which draws the trapezoid pad
             POINT   lowerLeft(  -dx - ddy, -dy - ddx );
@@ -483,11 +483,11 @@ PADSTACK* SPECCTRA_DB::makePADSTACK( BOARD* aBoard, D_PAD* aPad )
 
             // this string _must_ be unique for a given physical shape
             snprintf( name, sizeof(name), "Trapz%sPad_%.6gx%.6g_%c%.6gx%c%.6g_mil",
-                     uniqifier.c_str(), scale( TO_LEGACY_LU( aPad->m_Size.x ) ), scale( TO_LEGACY_LU( aPad->m_Size.y ) ),
-                     aPad->m_DeltaSize.x < ZERO_LENGTH ? 'n' : 'p',
-                     abs( scale( TO_LEGACY_LU( aPad->m_DeltaSize.x ) )),
-                     aPad->m_DeltaSize.y < ZERO_LENGTH ? 'n' : 'p',
-                     abs( scale( TO_LEGACY_LU( aPad->m_DeltaSize.y ) ))
+                     uniqifier.c_str(), scale( TO_LEGACY_LU( aPad->m_Size.x() ) ), scale( TO_LEGACY_LU( aPad->m_Size.y() ) ),
+                     aPad->m_DeltaSize.x() < ZERO_LENGTH ? 'n' : 'p',
+                     fabs( scale( TO_LEGACY_LU( aPad->m_DeltaSize.x() ) )),
+                     aPad->m_DeltaSize.y() < ZERO_LENGTH ? 'n' : 'p',
+                     fabs( scale( TO_LEGACY_LU( aPad->m_DeltaSize.y() ) ))
                      );
             name[ sizeof(name)-1 ] = 0;
 
@@ -527,7 +527,7 @@ IMAGE* SPECCTRA_DB::makeIMAGE( BOARD* aBoard, MODULE* aModule )
         // see if this pad is a through hole with no copper on its perimeter
         if( isRoundKeepout( pad ) )
         {
-            double  diameter = scale( TO_LEGACY_LU( pad->m_Drill.x ) );
+            double  diameter = scale( TO_LEGACY_LU( pad->m_Drill.x() ) );
             POINT   vertex   = mapPt( TO_LEGACY_LU_WXP( pad->m_Pos0 ) );
 
             int layerCount = aBoard->GetCopperLayerCount();

pcbnew/zones_convert_brd_items_to_polygons_with_Boost.cpp

@@ -201,7 +201,7 @@ void ZONE_CONTAINER::AddClearanceAreasPolygonsToPolysList( BOARD* aPcb )
                  * inside the board (in fact inside the hole. Some photo diodes and Leds are
                  * like this)
                  */
-                if( (pad->m_Drill.x == ZERO_LENGTH) && (pad->m_Drill.y == ZERO_LENGTH) )
+                if( (pad->m_Drill.x() == ZERO_LENGTH) && (pad->m_Drill.y() == ZERO_LENGTH) )
                     continue;
 
                 // Use a dummy pad to calculate a hole shape that have the same dimension as

pcbnew/zones_convert_to_polygons_aux_functions.cpp

@@ -68,15 +68,15 @@ void BuildUnconnectedThermalStubsPolygonList( std::vector<CPolyPt>& aCornerBuffe
             // Thermal bridges are like a segment from a starting point inside the pad
             // to an ending point outside the pad
             wxPoint startpoint, endpoint;
-            endpoint.x = ( TO_LEGACY_LU( pad->m_Size.x / 2 ) ) + aZone->m_ThermalReliefGapValue;
-            endpoint.y = ( TO_LEGACY_LU( pad->m_Size.y / 2 ) ) + aZone->m_ThermalReliefGapValue;
+            endpoint.x = ( TO_LEGACY_LU( pad->m_Size.x() / 2 ) ) + aZone->m_ThermalReliefGapValue;
+            endpoint.y = ( TO_LEGACY_LU( pad->m_Size.y() / 2 ) ) + aZone->m_ThermalReliefGapValue;
 
             int copperThickness = aZone->m_ThermalReliefCopperBridgeValue - aZone->m_ZoneMinThickness;
             if( copperThickness < 0 )
                 copperThickness = 0;
 
-            startpoint.x = min( TO_LEGACY_LU( pad->m_Size.x ), copperThickness );
-            startpoint.y = min( TO_LEGACY_LU( pad->m_Size.y ), copperThickness );
+            startpoint.x = min( TO_LEGACY_LU( pad->m_Size.x() ), copperThickness );
+            startpoint.y = min( TO_LEGACY_LU( pad->m_Size.y() ), copperThickness );
             startpoint.x /= 2;
             startpoint.y /= 2;
 

pcbnew/zones_polygons_insulated_copper_islands.cpp

@@ -40,7 +40,7 @@ void ZONE_CONTAINER::Test_For_Copper_Island_And_Remove_Insulated_Islands( BOARD
             if( pad->GetNet() != GetNet() )
                 continue;
 
-            ListPointsCandidates.push_back( pad->m_Pos );
+            ListPointsCandidates.push_back( TO_LEGACY_LU_WXP( pad->m_Pos ) );
         }
     }
 

pcbnew/zones_polygons_test_connections.cpp

@@ -111,7 +111,7 @@ void BOARD::Test_Connections_To_Copper_Areas( int aNetcode )
 
                     if( item->Type() == PCB_PAD_T )
                     {
-                        pos1 = pos2 = ( (D_PAD*) item )->m_Pos;
+                        pos1 = pos2 = TO_LEGACY_LU_WXP( ( (D_PAD*) item )->m_Pos ); /// @BUG Unsafe type conversion
                     }
                     else if( item->Type() == PCB_VIA_T )
                     {

polygon/math_for_graphics.h

 // math stuff for graphics, from FreePCB
 
-#ifndef abs
+/*#ifndef abs
 #define abs(x) (((x) >=0) ? (x) : (-(x)))
-#endif
+#endif*/
 
 
 typedef struct PointTag

potrace/auxiliary.h

@@ -73,6 +73,8 @@ static inline int floordiv( int a, int n )
 
 
 /* Note: the following work for integers and other numeric types. */
+/* those are bad programming practice because of several issues with
+overloading and integer limits
 #undef sign
 #undef abs
 #undef min
@@ -84,6 +86,79 @@ static inline int floordiv( int a, int n )
 #define min( a, b ) ( (a)<(b) ? (a) : (b) )
 #define max( a, b ) ( (a)>(b) ? (a) : (b) )
 #define sq( a )     ( (a) * (a) )
-#define cu( a )     ( (a) * (a) * (a) )
+#define cu( a )     ( (a) * (a) * (a) )*/
+
+// these functions better than macros because they do not cause double evaluation.
+static inline int sign( int x )
+{
+    return (0 < x) - (x < 0);
+}
+
+static inline int sign( long x )
+{
+    return (0 < x) - (x < 0);
+}
+
+static inline int sign( double x )
+{
+    return (0.0 < x) - (x < 0.0);
+}
+
+/*static inline int abs( int x ) is not required because exist in stdlib.h */
+
+static inline long abs( long x )
+{
+    return x < 0? -x : x;
+}
+
+static inline int max( int x, int y )
+{
+    return x < y? y : x;
+}
+
+static inline long max( long x, long y )
+{
+    return x < y? y : x;
+}
+
+static inline int min( int x, int y )
+{
+    return x < y? x : y;
+}
+
+static inline long min( long x, long y )
+{
+    return x < y? x : y;
+}
+
+static inline int sq( int x )
+{
+    return x * x;
+}
+
+static inline long sq( long x )
+{
+    return x * x;
+}
+
+static inline double sq( double x )
+{
+    return x * x;
+}
+
+static inline int cu( int x )
+{
+    return x * x * x;
+}
+
+static inline long cu( long x )
+{
+    return x * x * x;
+}
+
+static inline double cu( double x )
+{
+    return x * x * x;
+}
 
 #endif /* AUXILIARY_H */

potrace/render.cpp

@@ -278,7 +278,7 @@ void render_curveto( render_t* rm,
      *  occur at an endpoint. */
     dd0     = sq( x1 - 2 * x2 + x3 ) + sq( y1 - 2 * y2 + y3 );
     dd1     = sq( x2 - 2 * x3 + x4 ) + sq( y2 - 2 * y3 + y4 );
-    dd      = 6 * sqrt( max( dd0, dd1 ) );
+    dd      = 6 * sqrt( fmax( dd0, dd1 ) );
     e2      = 8 * delta <= dd ? 8 * delta / dd : 1;
     epsilon = sqrt( e2 ); /* necessary interval size */