Pcbnew: print dialog: code cleanup and bug fixes (added some fixes from Sergey A. Borshch)

gerbview/dialogs/dialog_print_using_printer.cpp

@@ -18,9 +18,6 @@
 #include <pcbplot.h>
 #include <class_board_design_settings.h>
 
-#define WIDTH_MAX_VALUE           1000
-#define WIDTH_MIN_VALUE           1
-
 static long   s_SelectedLayers;
 static double s_ScaleList[] =
 { 0, 0.5, 0.7, 0.999, 1.0, 1.4, 2.0, 3.0, 4.0 };

pcbnew/dialogs/dialog_print_for_modedit.cpp

@@ -17,9 +17,6 @@
 #include <dialog_print_for_modedit_base.h>
 #include <printout_controler.h>
 
-#define WIDTH_MAX_VALUE           1000
-#define WIDTH_MIN_VALUE           1
-
 static double s_ScaleList[] =
 { 0, 0.5, 0.7, 1.0, 1.4, 2.0, 3.0, 4.0, 8.0, 16.0 };
 

pcbnew/dialogs/dialog_print_using_printer.cpp

@@ -21,8 +21,8 @@
 #include <dialog_print_using_printer_base.h>
 
 
-#define WIDTH_MAX_VALUE           1000
-#define WIDTH_MIN_VALUE           1
+#define PEN_WIDTH_MAX_VALUE ( (int)(5 * IU_PER_MM) )
+#define PEN_WIDTH_MIN_VALUE ( (int)(0.005 * IU_PER_MM) )
 
 
 extern int g_DrawDefaultLineThickness;
@@ -211,6 +211,7 @@ void DIALOG_PRINT_USING_PRINTER::InitValues( )
         m_config->Read( OPTKEY_PRINT_SCALE, &scale_idx );
         m_config->Read( OPTKEY_PRINT_PAGE_FRAME, &s_Parameters.m_Print_Sheet_Ref, 1);
         m_config->Read( OPTKEY_PRINT_MONOCHROME_MODE, &s_Parameters.m_Print_Black_and_White, 1);
+        m_config->Read( OPTKEY_PRINT_PAGE_PER_LAYER, &s_Parameters.m_OptionPrintPage, 0);
         int tmp;
         m_config->Read( OPTKEY_PRINT_PADS_DRILL,  &tmp, PRINT_PARAMETERS::SMALL_DRILL_SHAPE );
         s_Parameters.m_DrillShapeOpt = (PRINT_PARAMETERS::DrillShapeOptT) tmp;
@@ -258,6 +259,7 @@ void DIALOG_PRINT_USING_PRINTER::InitValues( )
     else
         m_ModeColorOption->SetSelection( 0 );
 
+    m_PagesOption->SetSelection(s_Parameters.m_OptionPrintPage);
     s_Parameters.m_PenDefaultSize = g_DrawDefaultLineThickness;
     AddUnitSymbol( *m_TextPenWidth, g_UserUnit );
     m_DialogPenWidth->SetValue(
@@ -320,6 +322,7 @@ void DIALOG_PRINT_USING_PRINTER::OnCloseWindow( wxCloseEvent& event )
         m_config->Write( OPTKEY_PRINT_SCALE, m_ScaleOption->GetSelection() );
         m_config->Write( OPTKEY_PRINT_PAGE_FRAME, s_Parameters.m_Print_Sheet_Ref);
         m_config->Write( OPTKEY_PRINT_MONOCHROME_MODE, s_Parameters.m_Print_Black_and_White);
+        m_config->Write( OPTKEY_PRINT_PAGE_PER_LAYER, s_Parameters.m_OptionPrintPage );
         m_config->Write( OPTKEY_PRINT_PADS_DRILL, (long) s_Parameters.m_DrillShapeOpt );
         wxString layerKey;
         for( int layer = 0; layer < NB_LAYERS;  ++layer )
@@ -387,14 +390,14 @@ void DIALOG_PRINT_USING_PRINTER::SetPenWidth()
 
     s_Parameters.m_PenDefaultSize = ReturnValueFromTextCtrl( *m_DialogPenWidth );
 
-    if( s_Parameters.m_PenDefaultSize > WIDTH_MAX_VALUE )
+    if( s_Parameters.m_PenDefaultSize > PEN_WIDTH_MAX_VALUE )
     {
-        s_Parameters.m_PenDefaultSize = WIDTH_MAX_VALUE;
+        s_Parameters.m_PenDefaultSize = PEN_WIDTH_MAX_VALUE;
     }
 
-    if( s_Parameters.m_PenDefaultSize < WIDTH_MIN_VALUE )
+    if( s_Parameters.m_PenDefaultSize < PEN_WIDTH_MIN_VALUE )
     {
-        s_Parameters.m_PenDefaultSize = WIDTH_MIN_VALUE;
+        s_Parameters.m_PenDefaultSize = PEN_WIDTH_MIN_VALUE;
     }
 
     g_DrawDefaultLineThickness = s_Parameters.m_PenDefaultSize;
@@ -429,6 +432,14 @@ void DIALOG_PRINT_USING_PRINTER::OnPrintPreview( wxCommandEvent& event )
 {
     SetPrintParameters( );
 
+    // If no layer selected, we have no plot. prompt user if it happens
+    // because he could think there is a bug in Pcbnew:
+    if( s_Parameters.m_PrintMaskLayer == 0 )
+    {
+        DisplayError( this, _( "No layer selected" ) );
+        return;
+    }
+
     // Pass two printout objects: for preview, and possible printing.
     wxString        title   = _( "Print Preview" );
     wxPrintPreview* preview =
@@ -442,16 +453,6 @@ void DIALOG_PRINT_USING_PRINTER::OnPrintPreview( wxCommandEvent& event )
         return;
     }
 
-    SetLayerMaskFromListSelection();
-
-    // If no layer selected, we have no plot. prompt user if it happens
-    // because he could think there is a bug in Pcbnew:
-    if( s_Parameters.m_PrintMaskLayer == 0 )
-    {
-        DisplayError( this, _( "No layer selected" ) );
-        return;
-    }
-
     // Uses the parent position and size.
     // @todo uses last position and size ans store them when exit in m_config
     wxPoint         WPos  = m_parent->GetPosition();

pcbnew/pcbnew.cpp

@@ -121,6 +121,13 @@ bool EDA_APP::OnInit()
     {
         fn = argv[1];
 
+        // Be sure the filename is absolute, to avoid issues
+        // when the filename is relative,
+        // for instance when stored in history list without path,
+        // and when building the config filename ( which should have a path )
+        if( fn.IsRelative() )
+            fn.MakeAbsolute();
+
         if( fn.GetExt() != PcbFileExtension && fn.GetExt() != LegacyPcbFileExtension )
         {
             msg.Printf( _( "Pcbnew file <%s> has a wrong extension.\n\

pcbnew/pcbplot.h

@@ -28,6 +28,7 @@ class BOARD;
 #define OPTKEY_PRINT_MODULE_SCALE    wxT( "PrintModuleScale" )
 #define OPTKEY_PRINT_PAGE_FRAME      wxT( "PrintPageFrame" )
 #define OPTKEY_PRINT_MONOCHROME_MODE wxT( "PrintMonochrome" )
+#define OPTKEY_PRINT_PAGE_PER_LAYER  wxT( "PrintSinglePage" )
 #define OPTKEY_PRINT_PADS_DRILL      wxT( "PrintPadsDrillOpt" )
 #define OPTKEY_PLOT_X_FINESCALE_ADJ  wxT( "PlotXFineScaleAdj" )
 #define OPTKEY_PLOT_Y_FINESCALE_ADJ  wxT( "PlotYFineScaleAdj" )
@@ -37,13 +38,6 @@ class BOARD;
 #define PLOT_MIN_SCALE 0.01
 #define PLOT_MAX_SCALE 100.0
 
-// Conversion unit constants.
-// Convert pcb dimension of 0.1 mil to PS units of inches.
-#define SCALE_PS    .0001
-
-// Convert dimension 0.1 mil -> HPGL units (1 HPGL unit = 25 micrometers):
-#define SCALE_HPGL  0.102041
-
 // Small drill marks (small pad holes) diameter value
 #define SMALL_DRILL (int)( 0.35 * IU_PER_MM )
 

pcbnew/print_board_functions.cpp

@@ -32,7 +32,7 @@ void FOOTPRINT_EDIT_FRAME::PrintPage( wxDC* aDC,
                                       void * aData)
 {
     GR_DRAWMODE drawmode = GR_COPY;
-    int     defaultPenSize = 50;
+    int     defaultPenSize = Millimeter2iu( 0.2 );
 
     DISPLAY_OPTIONS save_opt;
 
@@ -53,6 +53,8 @@ void FOOTPRINT_EDIT_FRAME::PrintPage( wxDC* aDC,
     m_DisplayPadNum = DisplayOpt.DisplayPadNum = false;
     bool nctmp = GetBoard()->IsElementVisible(NO_CONNECTS_VISIBLE);
     GetBoard()->SetElementVisibility(NO_CONNECTS_VISIBLE, false);
+    bool anchorsTmp = GetBoard()->IsElementVisible( ANCHOR_VISIBLE );
+    GetBoard()->SetElementVisibility( ANCHOR_VISIBLE, false );
     DisplayOpt.DisplayPadIsol    = false;
     DisplayOpt.DisplayModEdge    = FILLED;
     DisplayOpt.DisplayModText    = FILLED;
@@ -96,6 +98,7 @@ void FOOTPRINT_EDIT_FRAME::PrintPage( wxDC* aDC,
     m_DisplayViaFill = DisplayOpt.DisplayViaFill;
     m_DisplayPadNum  = DisplayOpt.DisplayPadNum;
     GetBoard()->SetElementVisibility( NO_CONNECTS_VISIBLE, nctmp );
+    GetBoard()->SetElementVisibility(ANCHOR_VISIBLE, anchorsTmp);
 }
 
 
@@ -116,9 +119,8 @@ void PCB_EDIT_FRAME::PrintPage( wxDC* aDC,
     MODULE* Module;
     GR_DRAWMODE     drawmode = GR_COPY;
     DISPLAY_OPTIONS save_opt;
-    TRACK*          pt_trace;
     BOARD*          Pcb   = GetBoard();
-    int             defaultPenSize = 50;
+    int             defaultPenSize = Millimeter2iu( 0.2 );
     bool            onePagePerLayer = false;
 
     PRINT_PARAMETERS * printParameters = (PRINT_PARAMETERS*) aData; // can be null
@@ -222,7 +224,7 @@ void PCB_EDIT_FRAME::PrintPage( wxDC* aDC,
     }
 
     // Print tracks
-    pt_trace = Pcb->m_Track;
+    TRACK * pt_trace = Pcb->m_Track;
 
     for( ; pt_trace != NULL; pt_trace = pt_trace->Next() )
     {
@@ -246,8 +248,8 @@ void PCB_EDIT_FRAME::PrintPage( wxDC* aDC,
         }
     }
 
+    // Outdated: only for compatibility to old boards
     pt_trace = Pcb->m_Zone;
-
     for( ; pt_trace != NULL; pt_trace = pt_trace->Next() )
     {
         if( ( aPrintMaskLayer & pt_trace->ReturnMaskLayer() ) == 0 )

pcbnew/printout_controler.cpp

@@ -163,10 +163,7 @@ void BOARD_PRINTOUT_CONTROLLER::DrawPage()
     wxBusyCursor  dummy;
 
 #ifdef PCBNEW
-    if( m_PrintParams.PrintBorderAndTitleBlock() )
     boardBoundingBox =((PCB_BASE_FRAME*) m_Parent)->GetBoard()->ComputeBoundingBox();
-    else
-        boardBoundingBox =((PCB_BASE_FRAME*) m_Parent)->GetBoard()->ComputeBoundingBox( true );
 #else
     boardBoundingBox = ((GERBVIEW_FRAME*) m_Parent)->GetLayoutBoundingBox();
 #endif
@@ -192,8 +189,9 @@ void BOARD_PRINTOUT_CONTROLLER::DrawPage()
     // Compute the PCB size in internal units
     userscale = m_PrintParams.m_PrintScale;
 
-    if( m_PrintParams.m_PrintScale == 0 )                //  fit in page
+    if( m_PrintParams.m_PrintScale == 0 )   //  fit in page option
     {
+        // TODO: a better way to calculate the userscale
         userscale = 1.0;
     }