Commit 8bb93b8d authored by dickelbeck's avatar dickelbeck

beautified

parent ede37ecf
/********************************************************/
/* Routines generales de gestion des commandes usuelles */
/********************************************************/
/********************************************************/
/* Routines generales de gestion des commandes usuelles */
/********************************************************/
/* fichier controle.cpp */
/*
Routines d'affichage grille, Boite de coordonnees, Curseurs, marqueurs ...
*/
* Routines d'affichage grille, Boite de coordonnees, Curseurs, marqueurs ...
*/
#include "fctsys.h"
#include "gr_basic.h"
......@@ -21,351 +22,376 @@
/* Variables Locales */
/**********************************/
void RemoteCommand(char * cmdline)
void RemoteCommand( char* cmdline )
/**********************************/
/* Read a remote command send by eeschema via a socket,
port KICAD_PCB_PORT_SERVICE_NUMBER (currently 4242)
*/
* port KICAD_PCB_PORT_SERVICE_NUMBER (currently 4242)
*/
{
char Line[1024];
wxString msg;
char *idcmd, * text;
WinEDA_PcbFrame * frame = EDA_Appl->m_PcbFrame;
strncpy(Line, cmdline, sizeof(Line) -1 );
msg = CONV_FROM_UTF8(Line);
idcmd = strtok(Line," \n\r");
text = strtok(NULL," \n\r");
if ( (idcmd == NULL) || (text == NULL) ) return;
if( strcmp(idcmd,"$PART:") == 0 )
{
MODULE * Module;
msg = CONV_FROM_UTF8(text);
Module = ReturnModule(frame->m_Pcb, msg);
msg.Printf(_("Locate module %s %s"),msg.GetData(), Module ? wxT("Ok") : wxT("not found"));
frame->Affiche_Message(msg);
if ( Module )
{
wxClientDC dc(frame->DrawPanel);
frame->DrawPanel->PrepareGraphicContext(&dc);
frame->DrawPanel->CursorOff(&dc);
frame->GetScreen()->m_Curseur = Module->m_Pos;
frame->DrawPanel->CursorOn(&dc);
}
}
if(idcmd && strcmp(idcmd,"$PIN:") == 0)
{
wxString PinName, ModName;
MODULE * Module;
D_PAD * Pad = NULL;
int netcode = -1;
PinName = CONV_FROM_UTF8(text);
text = strtok(NULL," \n\r");
if(text && strcmp(text, "$PART:") == 0 ) text = strtok(NULL,"\n\r");
wxClientDC dc(frame->DrawPanel);
frame->DrawPanel->PrepareGraphicContext(&dc);
ModName = CONV_FROM_UTF8(text);
Module = ReturnModule(frame->m_Pcb, ModName);
if( Module ) Pad = ReturnPad(Module, PinName);
if( Pad ) netcode = Pad->m_NetCode;
if ( netcode > 0 )
{
/* effacement surbrillance ancienne */
if(g_HightLigt_Status) frame->Hight_Light(&dc);
g_HightLigth_NetCode = netcode;
frame->Hight_Light(&dc);
frame->DrawPanel->CursorOff(&dc);
frame->GetScreen()->m_Curseur = Pad->m_Pos;
frame->DrawPanel->CursorOn( &dc);
}
if ( Module == NULL )
msg.Printf( _("module %s not found"), text);
else if ( Pad == NULL )
msg.Printf( _("Pin %s (module %s) not found"), PinName.GetData(), ModName.GetData());
else
msg.Printf( _("Locate Pin %s (module %s)"), PinName.GetData(),ModName.GetData());
frame->Affiche_Message(msg);
}
char Line[1024];
wxString msg;
char* idcmd, * text;
WinEDA_PcbFrame* frame = EDA_Appl->m_PcbFrame;
strncpy( Line, cmdline, sizeof(Line) - 1 );
msg = CONV_FROM_UTF8( Line );
idcmd = strtok( Line, " \n\r" );
text = strtok( NULL, " \n\r" );
if( (idcmd == NULL) || (text == NULL) )
return;
if( strcmp( idcmd, "$PART:" ) == 0 )
{
MODULE* Module;
msg = CONV_FROM_UTF8( text );
Module = ReturnModule( frame->m_Pcb, msg );
msg.Printf( _( "Locate module %s %s" ), msg.GetData(),
Module ? wxT( "Ok" ) : wxT( "not found" ) );
frame->Affiche_Message( msg );
if( Module )
{
wxClientDC dc( frame->DrawPanel );
frame->DrawPanel->PrepareGraphicContext( &dc );
frame->DrawPanel->CursorOff( &dc );
frame->GetScreen()->m_Curseur = Module->m_Pos;
frame->DrawPanel->CursorOn( &dc );
}
}
if( idcmd && strcmp( idcmd, "$PIN:" ) == 0 )
{
wxString PinName, ModName;
MODULE* Module;
D_PAD* Pad = NULL;
int netcode = -1;
PinName = CONV_FROM_UTF8( text );
text = strtok( NULL, " \n\r" );
if( text && strcmp( text, "$PART:" ) == 0 )
text = strtok( NULL, "\n\r" );
wxClientDC dc( frame->DrawPanel );
frame->DrawPanel->PrepareGraphicContext( &dc );
ModName = CONV_FROM_UTF8( text );
Module = ReturnModule( frame->m_Pcb, ModName );
if( Module )
Pad = ReturnPad( Module, PinName );
if( Pad )
netcode = Pad->m_NetCode;
if( netcode > 0 )
{
/* effacement surbrillance ancienne */
if( g_HightLigt_Status )
frame->Hight_Light( &dc );
g_HightLigth_NetCode = netcode;
frame->Hight_Light( &dc );
frame->DrawPanel->CursorOff( &dc );
frame->GetScreen()->m_Curseur = Pad->m_Pos;
frame->DrawPanel->CursorOn( &dc );
}
if( Module == NULL )
msg.Printf( _( "module %s not found" ), text );
else if( Pad == NULL )
msg.Printf( _( "Pin %s (module %s) not found" ), PinName.GetData(), ModName.GetData() );
else
msg.Printf( _( "Locate Pin %s (module %s)" ), PinName.GetData(), ModName.GetData() );
frame->Affiche_Message( msg );
}
}
/***********************************************************************/
EDA_BaseStruct * WinEDA_BasePcbFrame::PcbGeneralLocateAndDisplay(void)
EDA_BaseStruct* WinEDA_BasePcbFrame::PcbGeneralLocateAndDisplay( void )
/***********************************************************************/
/* Search an item under the mouse cursor.
items are searched first on the current working layer.
if nothing found, an item will be searched without layer restriction
*/
* items are searched first on the current working layer.
* if nothing found, an item will be searched without layer restriction
*/
{
EDA_BaseStruct * item;
item = Locate(CURSEUR_OFF_GRILLE, GetScreen()->m_Active_Layer);
if ( item == NULL )
item = Locate(CURSEUR_OFF_GRILLE, -1);
return item;
EDA_BaseStruct* item;
item = Locate( CURSEUR_OFF_GRILLE, GetScreen()->m_Active_Layer );
if( item == NULL )
item = Locate( CURSEUR_OFF_GRILLE, -1 );
return item;
}
/****************************************************************/
void WinEDA_BasePcbFrame::GeneralControle(wxDC *DC, wxPoint Mouse)
void WinEDA_BasePcbFrame::GeneralControle( wxDC* DC, wxPoint Mouse )
/*****************************************************************/
{
int ll;
wxSize delta;
int zoom = GetScreen()->GetZoom();
wxPoint curpos, oldpos;
int hotkey = 0;
ActiveScreen = GetScreen();
// Save the board after the time out :
int CurrentTime = time(NULL);
if( !GetScreen()->IsModify() || GetScreen()->IsSave() )
{ /* If no change, reset the time out */
g_SaveTime = CurrentTime;
}
if ( (CurrentTime - g_SaveTime) > g_TimeOut)
{
wxString tmpFileName = GetScreen()->m_FileName;
wxString filename = g_SaveFileName + PcbExtBuffer;
bool flgmodify = GetScreen()->IsModify();
((WinEDA_PcbFrame*)this)->SavePcbFile(filename);
if( flgmodify ) // Set the flags m_Modify cleared by SavePcbFile()
{
GetScreen()->SetModify();
GetScreen()->SetSave();// Set the flags m_FlagSave cleared by SetModify()
}
GetScreen()->m_FileName = tmpFileName;
SetTitle(GetScreen()->m_FileName);
}
curpos = DrawPanel->CursorRealPosition(Mouse);
oldpos = GetScreen()->m_Curseur;
delta.x = (int) round((double)GetScreen()->GetGrid().x / zoom);
delta.y = (int) round((double)GetScreen()->GetGrid().y / zoom);
if( delta.x <= 0 ) delta.x = 1;
if( delta.y <= 0 ) delta.y = 1;
switch(g_KeyPressed)
{
case WXK_NUMPAD_SUBTRACT :
case WXK_SUBTRACT :
case '-' :
ll = GetScreen()->m_Active_Layer;
if(ll > CMP_N) break;
if(ll <= CUIVRE_N) break;
if ( m_Pcb->m_BoardSettings->m_CopperLayerCount <= 1) // Single layer
ll = CUIVRE_N;
if ( ll == CMP_N )
ll = MAX(CUIVRE_N, m_Pcb->m_BoardSettings->m_CopperLayerCount-2);
else if ( ll > CUIVRE_N) ll--;
GetScreen()->m_Active_Layer = ll;
if ( DisplayOpt.ContrastModeDisplay ) DrawPanel->Refresh(TRUE);
break ;
case WXK_NUMPAD_ADD :
case WXK_ADD :
case '+' :
ll = GetScreen()->m_Active_Layer;
if(ll >= CMP_N) break;
ll++;
if ( ll >= m_Pcb->m_BoardSettings->m_CopperLayerCount-1 )
ll = CMP_N;
if ( m_Pcb->m_BoardSettings->m_CopperLayerCount <= 1) // Single layer
ll = CUIVRE_N;
GetScreen()->m_Active_Layer = ll;
if ( DisplayOpt.ContrastModeDisplay ) DrawPanel->Refresh(TRUE);
break ;
case WXK_NUMPAD0 :
case WXK_PAGEUP :
SwitchLayer(DC, CMP_N);
break ;
case WXK_NUMPAD9 :
case WXK_PAGEDOWN :
SwitchLayer(DC, CUIVRE_N);
break ;
case 'F' | GR_KB_CTRL :
case 'f' | GR_KB_CTRL:
DisplayOpt.DisplayPcbTrackFill ^= 1; DisplayOpt.DisplayPcbTrackFill &= 1 ;
GetScreen()->SetRefreshReq();
break ;
case ' ' : /* Mise a jour de l'origine des coord relatives */
GetScreen()->m_O_Curseur = GetScreen()->m_Curseur;
break ;
case 'U' | GR_KB_CTRL :
case 'u' | GR_KB_CTRL :
g_UnitMetric = (g_UnitMetric == INCHES ) ? MILLIMETRE : INCHES;
break ;
case EDA_PANNING_UP_KEY :
OnZoom(ID_ZOOM_PANNING_UP);
curpos = m_CurrentScreen->m_Curseur;
break;
case EDA_PANNING_DOWN_KEY :
OnZoom(ID_ZOOM_PANNING_DOWN);
curpos = m_CurrentScreen->m_Curseur;
break;
case EDA_PANNING_LEFT_KEY :
OnZoom(ID_ZOOM_PANNING_LEFT);
curpos = m_CurrentScreen->m_Curseur;
break;
case EDA_PANNING_RIGHT_KEY :
OnZoom(ID_ZOOM_PANNING_RIGHT);
curpos = m_CurrentScreen->m_Curseur;
break;
case WXK_F1 :
OnZoom(ID_ZOOM_PLUS_KEY);
oldpos = curpos = GetScreen()->m_Curseur;
break;
case WXK_F2 :
OnZoom(ID_ZOOM_MOINS_KEY);
oldpos = curpos = GetScreen()->m_Curseur;
break;
case WXK_F3 :
OnZoom(ID_ZOOM_REDRAW_KEY);
break;
case WXK_F4 :
OnZoom(ID_ZOOM_CENTER_KEY);
oldpos = curpos = GetScreen()->m_Curseur;
break;
case WXK_F5 :
SwitchLayer(DC, LAYER_N_2);
break;
case WXK_F6 :
SwitchLayer(DC, LAYER_N_3);
break;
case WXK_F7 :
SwitchLayer(DC, LAYER_N_4);
break;
case WXK_F8 :
SwitchLayer(DC, LAYER_N_5);
break;
case WXK_F9 :
SwitchLayer(DC, LAYER_N_6);
break;
case WXK_F10 :
SwitchLayer(DC, LAYER_N_7);
break;
case WXK_NUMPAD8 : /* Deplacement curseur vers le haut */
case WXK_UP :
Mouse.y -= delta.y;
DrawPanel->MouseTo(Mouse);
break ;
case WXK_NUMPAD2: /* Deplacement curseur vers le bas */
case WXK_DOWN:
Mouse.y += delta.y;
DrawPanel->MouseTo(Mouse);
break ;
case WXK_NUMPAD4: /* Deplacement curseur vers la gauche */
case WXK_LEFT :
Mouse.x -= delta.x;
DrawPanel->MouseTo(Mouse);
break ;
case WXK_NUMPAD6: /* Deplacement curseur vers la droite */
case WXK_RIGHT:
Mouse.x += delta.x;
DrawPanel->MouseTo(Mouse);
break ;
default: hotkey = g_KeyPressed;
break;
}
/* Put cursor in new position, according to the zoom keys (if any) */
GetScreen()->m_Curseur = curpos;
/* Put cursor on grid or a pad centre if requested
But if the tool DELETE is active the cursor is left off grid
this is better to reach items to delete off grid
*/
D_PAD * pad;
bool keep_on_grid = TRUE;
if (m_ID_current_state == ID_PCB_DELETE_ITEM_BUTT) keep_on_grid = FALSE;
/* Cursor is left off grid if no block in progress and no moving object */
if ( GetScreen()->BlockLocate.m_State != STATE_NO_BLOCK)
keep_on_grid = TRUE;
EDA_BaseStruct *DrawStruct = GetScreen()->m_CurrentItem;
if ( DrawStruct && DrawStruct->m_Flags ) keep_on_grid = TRUE;
switch ( g_MagneticPadOption )
{
case capture_cursor_in_track_tool:
case capture_always:
pad = Locate_Any_Pad(m_Pcb,CURSEUR_OFF_GRILLE, TRUE);
if ( (m_ID_current_state != ID_TRACK_BUTT ) &&
(g_MagneticPadOption == capture_cursor_in_track_tool) )
pad = NULL;
if (keep_on_grid)
{
if (pad) // Put cursor on the pad
GetScreen()->m_Curseur = curpos = pad->m_Pos;
else // Put cursor on grid
PutOnGrid( & GetScreen()->m_Curseur);
}
break;
case no_effect:
default:
// If we are not in delete function, put cursor on grid
if (keep_on_grid)
PutOnGrid( & GetScreen()->m_Curseur);
break;
}
if ( oldpos != GetScreen()->m_Curseur )
{
curpos = GetScreen()->m_Curseur;
GetScreen()->m_Curseur = oldpos;
DrawPanel->CursorOff(DC);
GetScreen()->m_Curseur = curpos;
DrawPanel->CursorOn(DC);
if(DrawPanel->ManageCurseur)
{
DrawPanel->ManageCurseur(DrawPanel, DC, TRUE);
}
}
if( GetScreen()->IsRefreshReq() )
{
RedrawActiveWindow(DC, TRUE);
}
SetToolbars();
Affiche_Status_Box(); /* Affichage des coord curseur */
if ( hotkey )
{
OnHotKey(DC, hotkey, NULL);
}
int ll;
wxSize delta;
int zoom = GetScreen()->GetZoom();
wxPoint curpos, oldpos;
int hotkey = 0;
ActiveScreen = GetScreen();
// Save the board after the time out :
int CurrentTime = time( NULL );
if( !GetScreen()->IsModify() || GetScreen()->IsSave() )
{ /* If no change, reset the time out */
g_SaveTime = CurrentTime;
}
if( (CurrentTime - g_SaveTime) > g_TimeOut )
{
wxString tmpFileName = GetScreen()->m_FileName;
wxString filename = g_SaveFileName + PcbExtBuffer;
bool flgmodify = GetScreen()->IsModify();
( (WinEDA_PcbFrame*) this )->SavePcbFile( filename );
if( flgmodify ) // Set the flags m_Modify cleared by SavePcbFile()
{
GetScreen()->SetModify();
GetScreen()->SetSave(); // Set the flags m_FlagSave cleared by SetModify()
}
GetScreen()->m_FileName = tmpFileName;
SetTitle( GetScreen()->m_FileName );
}
curpos = DrawPanel->CursorRealPosition( Mouse );
oldpos = GetScreen()->m_Curseur;
delta.x = (int) round( (double) GetScreen()->GetGrid().x / zoom );
delta.y = (int) round( (double) GetScreen()->GetGrid().y / zoom );
if( delta.x <= 0 )
delta.x = 1;
if( delta.y <= 0 )
delta.y = 1;
switch( g_KeyPressed )
{
case WXK_NUMPAD_SUBTRACT:
case WXK_SUBTRACT:
case '-':
ll = GetScreen()->m_Active_Layer;
if( ll > CMP_N )
break;
if( ll <= CUIVRE_N )
break;
if( m_Pcb->m_BoardSettings->m_CopperLayerCount <= 1 ) // Single layer
ll = CUIVRE_N;
if( ll == CMP_N )
ll = MAX( CUIVRE_N, m_Pcb->m_BoardSettings->m_CopperLayerCount - 2 );
else if( ll > CUIVRE_N )
ll--;
GetScreen()->m_Active_Layer = ll;
if( DisplayOpt.ContrastModeDisplay )
DrawPanel->Refresh( TRUE );
break;
case WXK_NUMPAD_ADD:
case WXK_ADD:
case '+':
ll = GetScreen()->m_Active_Layer;
if( ll >= CMP_N )
break;
ll++;
if( ll >= m_Pcb->m_BoardSettings->m_CopperLayerCount - 1 )
ll = CMP_N;
if( m_Pcb->m_BoardSettings->m_CopperLayerCount <= 1 ) // Single layer
ll = CUIVRE_N;
GetScreen()->m_Active_Layer = ll;
if( DisplayOpt.ContrastModeDisplay )
DrawPanel->Refresh( TRUE );
break;
case WXK_NUMPAD0:
case WXK_PAGEUP:
SwitchLayer( DC, CMP_N );
break;
case WXK_NUMPAD9:
case WXK_PAGEDOWN:
SwitchLayer( DC, CUIVRE_N );
break;
case 'F' | GR_KB_CTRL:
case 'f' | GR_KB_CTRL:
DisplayOpt.DisplayPcbTrackFill ^= 1; DisplayOpt.DisplayPcbTrackFill &= 1;
GetScreen()->SetRefreshReq();
break;
case ' ': /* Mise a jour de l'origine des coord relatives */
GetScreen()->m_O_Curseur = GetScreen()->m_Curseur;
break;
case 'U' | GR_KB_CTRL:
case 'u' | GR_KB_CTRL:
g_UnitMetric = (g_UnitMetric == INCHES ) ? MILLIMETRE : INCHES;
break;
case EDA_PANNING_UP_KEY:
OnZoom( ID_ZOOM_PANNING_UP );
curpos = m_CurrentScreen->m_Curseur;
break;
case EDA_PANNING_DOWN_KEY:
OnZoom( ID_ZOOM_PANNING_DOWN );
curpos = m_CurrentScreen->m_Curseur;
break;
case EDA_PANNING_LEFT_KEY:
OnZoom( ID_ZOOM_PANNING_LEFT );
curpos = m_CurrentScreen->m_Curseur;
break;
case EDA_PANNING_RIGHT_KEY:
OnZoom( ID_ZOOM_PANNING_RIGHT );
curpos = m_CurrentScreen->m_Curseur;
break;
case WXK_F1:
OnZoom( ID_ZOOM_PLUS_KEY );
oldpos = curpos = GetScreen()->m_Curseur;
break;
case WXK_F2:
OnZoom( ID_ZOOM_MOINS_KEY );
oldpos = curpos = GetScreen()->m_Curseur;
break;
case WXK_F3:
OnZoom( ID_ZOOM_REDRAW_KEY );
break;
case WXK_F4:
OnZoom( ID_ZOOM_CENTER_KEY );
oldpos = curpos = GetScreen()->m_Curseur;
break;
case WXK_F5:
SwitchLayer( DC, LAYER_N_2 );
break;
case WXK_F6:
SwitchLayer( DC, LAYER_N_3 );
break;
case WXK_F7:
SwitchLayer( DC, LAYER_N_4 );
break;
case WXK_F8:
SwitchLayer( DC, LAYER_N_5 );
break;
case WXK_F9:
SwitchLayer( DC, LAYER_N_6 );
break;
case WXK_F10:
SwitchLayer( DC, LAYER_N_7 );
break;
case WXK_NUMPAD8: /* Deplacement curseur vers le haut */
case WXK_UP:
Mouse.y -= delta.y;
DrawPanel->MouseTo( Mouse );
break;
case WXK_NUMPAD2: /* Deplacement curseur vers le bas */
case WXK_DOWN:
Mouse.y += delta.y;
DrawPanel->MouseTo( Mouse );
break;
case WXK_NUMPAD4: /* Deplacement curseur vers la gauche */
case WXK_LEFT:
Mouse.x -= delta.x;
DrawPanel->MouseTo( Mouse );
break;
case WXK_NUMPAD6: /* Deplacement curseur vers la droite */
case WXK_RIGHT:
Mouse.x += delta.x;
DrawPanel->MouseTo( Mouse );
break;
default:
hotkey = g_KeyPressed;
break;
}
/* Put cursor in new position, according to the zoom keys (if any) */
GetScreen()->m_Curseur = curpos;
/* Put cursor on grid or a pad centre if requested
* But if the tool DELETE is active the cursor is left off grid
* this is better to reach items to delete off grid
*/
D_PAD* pad;
bool keep_on_grid = TRUE;
if( m_ID_current_state == ID_PCB_DELETE_ITEM_BUTT )
keep_on_grid = FALSE;
/* Cursor is left off grid if no block in progress and no moving object */
if( GetScreen()->BlockLocate.m_State != STATE_NO_BLOCK )
keep_on_grid = TRUE;
EDA_BaseStruct* DrawStruct = GetScreen()->m_CurrentItem;
if( DrawStruct && DrawStruct->m_Flags )
keep_on_grid = TRUE;
switch( g_MagneticPadOption )
{
case capture_cursor_in_track_tool:
case capture_always:
pad = Locate_Any_Pad( m_Pcb, CURSEUR_OFF_GRILLE, TRUE );
if( (m_ID_current_state != ID_TRACK_BUTT )
&& (g_MagneticPadOption == capture_cursor_in_track_tool) )
pad = NULL;
if( keep_on_grid )
{
if( pad ) // Put cursor on the pad
GetScreen()->m_Curseur = curpos = pad->m_Pos;
else
// Put cursor on grid
PutOnGrid( &GetScreen()->m_Curseur );
}
break;
case no_effect:
default:
// If we are not in delete function, put cursor on grid
if( keep_on_grid )
PutOnGrid( &GetScreen()->m_Curseur );
break;
}
if( oldpos != GetScreen()->m_Curseur )
{
curpos = GetScreen()->m_Curseur;
GetScreen()->m_Curseur = oldpos;
DrawPanel->CursorOff( DC );
GetScreen()->m_Curseur = curpos;
DrawPanel->CursorOn( DC );
if( DrawPanel->ManageCurseur )
{
DrawPanel->ManageCurseur( DrawPanel, DC, TRUE );
}
}
if( GetScreen()->IsRefreshReq() )
{
RedrawActiveWindow( DC, TRUE );
}
SetToolbars();
Affiche_Status_Box(); /* Affichage des coord curseur */
if( hotkey )
{
OnHotKey( DC, hotkey, NULL );
}
}
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment