Pcbnew: fix bug Bug #1101399 (Custom page size gets reset after restarting...

Pcbnew: fix bug Bug #1101399 (Custom page size gets reset after restarting pcbnew) (bug also in eeschema)
Try to find a better fix for Bug #1100876

common/dialogs/dialog_page_settings.cpp

@@ -89,6 +89,7 @@ DIALOG_PAGES_SETTINGS::DIALOG_PAGES_SETTINGS( EDA_DRAW_FRAME* parent ) :
     m_modified = false;
     m_page_bitmap = NULL;
     m_tb = m_Parent->GetTitleBlock();
+    m_customFmt = false;
 
     initDialog();
 
@@ -111,7 +112,7 @@ void DIALOG_PAGES_SETTINGS::initDialog()
     double      customSizeY;
 
     // initalize page format choice box and page format list.
-    // The first shows translated strings, the second contains not tralated strings
+    // The first shows translated strings, the second contains not translated strings
     m_paperSizeComboBox->Clear();
 
     for( unsigned ii = 0; ; ii++ )
@@ -146,11 +147,22 @@ void DIALOG_PAGES_SETTINGS::initDialog()
     wxCommandEvent dummy;
     OnPaperSizeChoice( dummy );
 
+    if( m_customFmt)    // The custom value is defined by the page size
+    {
+        customSizeX = m_pageInfo.GetWidthMils();
+        customSizeY = m_pageInfo.GetHeightMils();
+    }
+    else    // The custom value is set to a default value, or the last defined value
+    {
+        customSizeX = m_pageInfo.GetCustomWidthMils();
+        customSizeY = m_pageInfo.GetCustomHeightMils();
+    }
+
     switch( g_UserUnit )
     {
     case MILLIMETRES:
-        customSizeX = m_pageInfo.GetCustomWidthMils() * 25.4e-3;
-        customSizeY = m_pageInfo.GetCustomHeightMils()* 25.4e-3;
+        customSizeX *= 25.4e-3;
+        customSizeY *= 25.4e-3;
 
         msg.Printf( wxT( "%.2f" ), customSizeX );
         m_TextUserSizeX->SetValue( msg );
@@ -161,8 +173,8 @@ void DIALOG_PAGES_SETTINGS::initDialog()
 
     default:
     case INCHES:
-        customSizeX = m_pageInfo.GetCustomWidthMils()  / 1000.0;
-        customSizeY = m_pageInfo.GetCustomHeightMils() / 1000.0;
+        customSizeX /= 1000.0;
+        customSizeY /= 1000.0;
 
         msg.Printf( wxT( "%.3f" ), customSizeX );
         m_TextUserSizeX->SetValue( msg );
@@ -172,15 +184,6 @@ void DIALOG_PAGES_SETTINGS::initDialog()
         break;
     }
 
-#if 0
-    m_TextRevision->SetValidator( wxTextValidator( wxFILTER_NONE, &m_Screen->m_Revision ) );
-    m_TextTitle->SetValidator( wxTextValidator( wxFILTER_NONE, &m_Screen->m_Title ) );
-    m_TextCompany->SetValidator( wxTextValidator( wxFILTER_NONE, &m_Screen->m_Company ) );
-    m_TextComment1->SetValidator( wxTextValidator( wxFILTER_NONE, &m_Screen->m_Commentaire1 ) );
-    m_TextComment2->SetValidator( wxTextValidator( wxFILTER_NONE, &m_Screen->m_Commentaire2 ) );
-    m_TextComment3->SetValidator( wxTextValidator( wxFILTER_NONE, &m_Screen->m_Commentaire3 ) );
-    m_TextComment4->SetValidator( wxTextValidator( wxFILTER_NONE, &m_Screen->m_Commentaire4 ) );
-#else
     m_TextRevision->SetValue( m_tb.GetRevision() );
     m_TextTitle->SetValue( m_tb.GetTitle() );
     m_TextCompany->SetValue( m_tb.GetCompany() );
@@ -188,7 +191,6 @@ void DIALOG_PAGES_SETTINGS::initDialog()
     m_TextComment2->SetValue( m_tb.GetComment2() );
     m_TextComment3->SetValue( m_tb.GetComment3() );
     m_TextComment4->SetValue( m_tb.GetComment4() );
-#endif
 
 #ifndef EESCHEMA
     m_RevisionExport->Show( false );
@@ -248,6 +250,7 @@ void DIALOG_PAGES_SETTINGS::OnPaperSizeChoice( wxCommandEvent& event )
         m_orientationComboBox->Enable( false );
         m_TextUserSizeX->Enable( true );
         m_TextUserSizeY->Enable( true );
+        m_customFmt = true;
     }
     else
     {
@@ -261,6 +264,7 @@ void DIALOG_PAGES_SETTINGS::OnPaperSizeChoice( wxCommandEvent& event )
 
         m_TextUserSizeX->Enable( false );
         m_TextUserSizeY->Enable( false );
+        m_customFmt = false;
     }
 
     GetPageLayoutInfoFromDialog();

common/dialogs/dialog_page_settings.h

 /*
  * This program source code file is part of KICAD, a free EDA CAD application.
  *
- * Copyright (C) 1992-2010 <Creator>
- * Copyright (C) 1992-2010 Kicad Developers, see AUTHORS.txt for contributors.
+ * Copyright (C) 1992-2013 Kicad Developers, see AUTHORS.txt for contributors.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -45,6 +44,7 @@ private:
     wxBitmap*       m_page_bitmap;      /// Temporary bitmap for the page layout example.
     wxSize          m_layout_size;      /// Logical page layout size.
     PAGE_INFO       m_pageInfo;         /// Temporary page info.
+    bool            m_customFmt;        /// true if the page selection is custom
     TITLE_BLOCK     m_tb;               /// Temporary title block (basic inscriptions).
 
 public:

pcbnew/dialogs/dialog_general_options.cpp

@@ -155,7 +155,7 @@ void DIALOG_GENERALOPTIONS::OnOkClick( wxCommandEvent& event )
 void PCB_EDIT_FRAME::OnSelectOptionToolbar( wxCommandEvent& event )
 {
     int id = event.GetId();
-    bool state = m_optionsToolBar->GetToolToggled( id );
+    bool state = event.IsChecked();
 
     switch( id )
     {
@@ -169,16 +169,13 @@ void PCB_EDIT_FRAME::OnSelectOptionToolbar( wxCommandEvent& event )
             else
                 m_canvas->SetCursor( wxCURSOR_QUESTION_ARROW );
         }
-
         break;
 
     case ID_TB_OPTIONS_SHOW_RATSNEST:
         SetElementVisibility( RATSNEST_VISIBLE, state );
 
         if( state && (GetBoard()->m_Status_Pcb & LISTE_RATSNEST_ITEM_OK) == 0 )
-        {
             Compile_Ratsnest( NULL, true );
-        }
 
         m_canvas->Refresh();
         break;

pcbnew/pcbframe.cpp

@@ -834,32 +834,21 @@ void PCB_EDIT_FRAME::OnSelectAutoPlaceMode( wxCommandEvent& aEvent )
     // inside this function (seems happen on some Linux/wxWidgets versions)
     // when the other tool is selected
 
-    int previous_state = m_autoPlaceModeId;
     switch( aEvent.GetId() )
     {
         case ID_TOOLBARH_PCB_MODE_MODULE:
             if( aEvent.IsChecked() )
-            {
                 m_autoPlaceModeId = ID_TOOLBARH_PCB_MODE_MODULE;
-
-                if( previous_state == ID_TOOLBARH_PCB_MODE_TRACKS )
-                    m_mainToolBar->ToggleTool( ID_TOOLBARH_PCB_MODE_TRACKS, false );
-            }
             else if( m_autoPlaceModeId == ID_TOOLBARH_PCB_MODE_MODULE )
-                // Deselect m_autoPlaceModeId only if it was selected by this tool
+                // clear m_autoPlaceModeId only if it was activated by this tool
                 m_autoPlaceModeId = 0;
             break;
 
         case ID_TOOLBARH_PCB_MODE_TRACKS:
             if( aEvent.IsChecked() )
-            {
                 m_autoPlaceModeId = ID_TOOLBARH_PCB_MODE_TRACKS;
-
-                if( previous_state == ID_TOOLBARH_PCB_MODE_MODULE )
-                    m_mainToolBar->ToggleTool( ID_TOOLBARH_PCB_MODE_MODULE, false );
-            }
             else if( m_autoPlaceModeId == ID_TOOLBARH_PCB_MODE_TRACKS )
-                // Deselect m_autoPlaceModeId only if it was selected by this tool
+                // clear m_autoPlaceModeId only if it was activated by this tool
                 m_autoPlaceModeId = 0;
             break;
         }

pcbnew/toolbars_update_user_interface.cpp

@@ -113,7 +113,8 @@ void PCB_EDIT_FRAME::OnUpdateZoneDisplayStyle( wxUpdateUIEvent& aEvent )
 
 void PCB_EDIT_FRAME::OnUpdateDrcEnable( wxUpdateUIEvent& aEvent )
 {
-    aEvent.Check( !Drc_On );
+    bool state = !Drc_On;
+    aEvent.Check( state );
     m_optionsToolBar->SetToolShortHelp( ID_TB_OPTIONS_DRC_OFF,
                                         Drc_On ?
                                         _( "Disable design rule checking" ) :
@@ -205,15 +206,12 @@ void PCB_EDIT_FRAME::OnUpdateVerticalToolbar( wxUpdateUIEvent& aEvent )
 
 
 void PCB_EDIT_FRAME::OnUpdateAutoPlaceTracksMode( wxUpdateUIEvent& aEvent )
-{
+{return;
     // Automatic placement of modules and tracks is a mutually exclusive operation
     // So this tool is activated only if
     // m_autoPlaceModeId == ID_TOOLBARH_PCB_MODE_TRACKS.
-    // To avoid creating erroneous events (seems happen on some Linux/wxWidgets versions)
-    // the tool state is changed only when it is incorrect
     bool state = m_autoPlaceModeId == ID_TOOLBARH_PCB_MODE_TRACKS;
-    if( aEvent.IsChecked() != state )
-        aEvent.Check( state );
+    m_mainToolBar->ToggleTool( ID_TOOLBARH_PCB_MODE_TRACKS, state );
 }
 
 
@@ -222,9 +220,6 @@ void PCB_EDIT_FRAME::OnUpdateAutoPlaceModulesMode( wxUpdateUIEvent& aEvent )
     // Automatic placement of modules and tracks is a mutually exclusive operation,
     // So this tool is activated only if
     // m_autoPlaceModeId == ID_TOOLBARH_PCB_MODE_MODULE.
-    // To avoid creating erroneous events (seems happen on some Linux/wxWidgets versions)
-    // the tool state is changed only when it is incorrect
     bool state = m_autoPlaceModeId == ID_TOOLBARH_PCB_MODE_MODULE;
-    if( aEvent.IsChecked() != state )
-        aEvent.Check( state );
+    m_mainToolBar->ToggleTool( ID_TOOLBARH_PCB_MODE_MODULE, state );
 }