Skip to content

K
kicad-source-mirror
Commit 7d676fbf authored by CHARRAS's avatar CHARRAS
Browse files
Options

support for micro vias. small problem in zone detection solved

parent 1d683046
Hide whitespace changes
Inline Side-by-side
Showing with 1202 additions and 1092 deletions
change_log.txt
View file @ 7d676fbf
......@@ -5,6 +5,22 @@ Please add newer entries at the top, list the date and your name with
email address.
2007-Dec-18 UPDATE Jean-Pierre Charras <jean-pierre.charras@inpg.fr>
================================================================================
+pcbnew:
rework of drill filles creation (excellon and reports)
needed to have a clean implantation of buried vias and mainly microvia
which involve a more complex drill files generation
This is better to continue work on zones because :
hight density boards = use of BGA = microvias + good zones handling
When a board has buried or blind vias (microvia are blind vias),
pcbnew creates a drill file per layer pair. for a 4 layer board:
drill file for layer1 to layer 2
drill file for layer2 to layer 3
drill file for layer3 to layer 4
2008-Jan-18 UPDATE Dick Hollenbeck <dick@softplc.com>
================================================================================
how-to-build-kicad.txt: added the Boost C++ Libraries installation info
......
pcbnew/class_track.cpp
View file @ 7d676fbf
......@@ -323,7 +323,9 @@ void SEGVIA::SetLayerPair( int top_layer, int bottom_layer )
void SEGVIA::ReturnLayerPair( int* top_layer, int* bottom_layer ) const
/*********************************************************************/
/* Return the 2 layers used by the via (the via actually uses
/**
* Function ReturnLayerPair
* Return the 2 layers used by the via (the via actually uses
* all layers between these 2 layers)
* @param top_layer = pointer to the first layer (can be null)
* @param bottom_layer = pointer to the last layer (can be null)
......
pcbnew/dialog_gendrill.h
View file @ 7d676fbf
......@@ -149,14 +149,13 @@ private:
void InitDisplayParams(void);
void SetParams(void);
void GenDrillFiles( wxCommandEvent& event );
void GenDrillMap( std::vector<DRILL_TOOL> & buffer, int format );
void GenDrillMap( const wxString aFileName, std::vector<HOLE_INFO> & aHoleListBuffer, std::vector<DRILL_TOOL> & aToolListBuffer, int format );
void UpdatePrecisionOptions( wxCommandEvent& event );
void UpdateConfig();
int Plot_Drill_PcbMap( std::vector<DRILL_TOOL> & buffer, int format );
void GenDrillReport( std::vector<DRILL_TOOL> & buffer );
int Gen_Liste_Forets( std::vector<DRILL_TOOL> & buffer, bool print_header );
int Create_Drill_File_EXCELLON( std::vector<DRILL_TOOL> & buffer );
void Init_Drill();
void Write_Excellon_Header( FILE * aFile);
void GenDrillReport( const wxString aFileName, std::vector<DRILL_TOOL> & buffer );
int Create_Drill_File_EXCELLON( std::vector<HOLE_INFO> & aHoleListBuffer,
std::vector<DRILL_TOOL> & aToolListBuffer );
int Gen_Liste_Tools( std::vector<DRILL_TOOL> & buffer, bool print_header );
};
......
pcbnew/dialog_track_options.cpp
View file @ 7d676fbf
......@@ -297,12 +297,6 @@ void WinEDA_PcbTracksDialog::AcceptPcbOptions(wxCommandEvent& event)
g_DesignSettings.m_CurrentViaType = VIA_THROUGH;
if ( m_OptViaType->GetSelection() > 0 )
g_DesignSettings.m_CurrentViaType = VIA_BLIND_BURIED;
if ( g_DesignSettings.m_CurrentViaType != VIA_THROUGH )
{
if( ! IsOK(this,
_("You have selected VIA Blind and Buried\nWARNING: this feature is EXPERIMENTAL!!! Accept ?") ) )
g_DesignSettings.m_CurrentViaType = VIA_THROUGH;
}
g_DesignSettings.m_CurrentViaSize =
ReturnValueFromTextCtrl(*m_OptViaSize, m_Parent->m_InternalUnits);
......
pcbnew/gen_drill_report_files.cpp 0 → 100644
View file @ 7d676fbf
/*************************************************************************/
/* Functions to create drill data used to create aFiles and report aFiles */
/*************************************************************************/
#include "fctsys.h"
using namespace std;
#include <vector>
#include "common.h"
#include "plot_common.h"
#include "pcbnew.h"
#include "pcbplot.h"
#include "macros.h"
#include "gendrill.h"
static void PlotDrillSymbol( const wxPoint& position, int diametre, int aShapeId, int format );
static void PlotOvalDrillSymbol( const wxPoint& position,
const wxSize& size,
int orient,
int format );
/**********************************************************************************/
void GenDrillMapFile( BOARD* aPcb, FILE* aFile, const wxString& aFullFileName, wxSize aSheetSize,
std::vector<HOLE_INFO> aHoleListBuffer,
std::vector<DRILL_TOOL> aToolListBuffer,
bool aUnit_Drill_is_Inch, int format )
/**********************************************************************************/
/* Genere le plan de percage (Drill map) format HPGL ou POSTSCRIPT
*/
{
unsigned ii;
int x, y;
int plotX, plotY, TextWidth;
int intervalle = 0, CharSize = 0;
EDA_BaseStruct* PtStruct;
int old_g_PlotOrient = g_PlotOrient;
char line[1024];
int dX, dY;
wxPoint BoardCentre;
int PlotMarge_in_mils = 400; // Margin in 1/1000 inch
int marge = PlotMarge_in_mils * U_PCB;
wxSize SheetSize;
float fTextScale = 1.0;
double scale_x = 1.0, scale_y = 1.0;
Ki_PageDescr* SheetPS = NULL;
wxString msg;
setlocale( LC_NUMERIC, "C" ); // Use the standard notation for float numbers
g_PlotOrient = 0;
/* calcul des dimensions et centre du PCB */
aPcb->ComputeBoundaryBox();
dX = aPcb->m_BoundaryBox.GetWidth();
dY = aPcb->m_BoundaryBox.GetHeight();
BoardCentre = aPcb->m_BoundaryBox.Centre();
// Calcul de l'echelle du dessin du PCB,
// Echelle 1 en HPGL, dessin sur feuille A4 en PS, + texte description des symboles
switch( format )
{
case PLOT_FORMAT_HPGL: /* Calcul des echelles de conversion format HPGL */
Scale_X = Scale_Y = 1.0;
scale_x = Scale_X * SCALE_HPGL;
scale_y = Scale_Y * SCALE_HPGL;
fTextScale = SCALE_HPGL;
SheetSize = aSheetSize;
SheetSize.x *= U_PCB;
SheetSize.y *= U_PCB;
g_PlotOffset.x = 0;
g_PlotOffset.y = (int) (SheetSize.y * scale_y);
break;
case PLOT_FORMAT_POST:
{
// calcul en unites internes des dimensions de la feuille ( connues en 1/1000 pouce )
SheetPS = &g_Sheet_A4;
SheetSize.x = SheetPS->m_Size.x * U_PCB;
SheetSize.y = SheetPS->m_Size.y * U_PCB;
float Xscale = (float) ( SheetSize.x - (marge * 2) ) / dX;
float Yscale = (float) ( SheetSize.y * 0.6 - (marge * 2) ) / dY;
scale_x = scale_y = MIN( Xscale, Yscale );
g_PlotOffset.x = -(SheetSize.x / 2) +
(int) (BoardCentre.x * scale_x) + marge;
g_PlotOffset.y = SheetSize.y / 2 +
(int) (BoardCentre.y * scale_y) - marge;
g_PlotOffset.y += SheetSize.y / 8; /* decalage pour legende */
break;
}
default:
break;
}
switch( format )
{
case PLOT_FORMAT_HPGL:
InitPlotParametresHPGL( g_PlotOffset, scale_x, scale_y );
PrintHeaderHPGL( aFile, g_HPGL_Pen_Speed, g_HPGL_Pen_Num );
break;
case PLOT_FORMAT_POST:
{
int BBox[4];
BBox[0] = BBox[1] = PlotMarge_in_mils;
BBox[2] = SheetPS->m_Size.x - PlotMarge_in_mils;
BBox[3] = SheetPS->m_Size.y - PlotMarge_in_mils;
InitPlotParametresPS( g_PlotOffset,
SheetPS,
(double) 1.0 / PCB_INTERNAL_UNIT,
(double) 1.0 / PCB_INTERNAL_UNIT );
SetDefaultLineWidthPS( 10 ); // Set line with to 10/1000 inch
PrintHeaderPS( aFile, wxT( "PCBNEW-PS" ), aFullFileName, 1, BBox, wxLANDSCAPE );
InitPlotParametresPS( g_PlotOffset, SheetPS, scale_x, scale_y );
}
break;
default:
break;
}
/* Draw items on edge layer */
PtStruct = aPcb->m_Drawings;
for( ; PtStruct != NULL; PtStruct = PtStruct->Pnext )
{
switch( PtStruct->Type() )
{
case TYPEDRAWSEGMENT:
PlotDrawSegment( (DRAWSEGMENT*) PtStruct, format, EDGE_LAYER );
break;
case TYPETEXTE:
PlotTextePcb( (TEXTE_PCB*) PtStruct, format, EDGE_LAYER );
break;
case TYPECOTATION:
PlotCotation( (COTATION*) PtStruct, format, EDGE_LAYER );
break;
case TYPEMIRE:
PlotMirePcb( (MIREPCB*) PtStruct, format, EDGE_LAYER );
break;
case TYPEMARKER: // do not draw
break;
default:
DisplayError( NULL, wxT( "WinEDA_DrillFrame::GenDrillMap() : Unexpected Draw Type" ) );
break;
}
}
TextWidth = 50; // Set Drill Symbols width in 1/10000 mils
if( format == PLOT_FORMAT_POST )
{
sprintf( line, "%d setlinewidth\n", TextWidth );
fputs( line, aFile );
}
Gen_Drill_PcbMap( aPcb, aFile, aHoleListBuffer, aToolListBuffer, format );
/* Impression de la liste des symboles utilises */
CharSize = 800; /* text size in 1/10000 mils */
float CharScale = 1.0 / scale_x; /* real scale will be CharScale * scale_x,
* because the global plot scale is scale_x */
TextWidth = (int) (50 * CharScale); // Set text width
intervalle = (int) (CharSize * CharScale) + TextWidth;
switch( format )
{
case PLOT_FORMAT_HPGL:
{
/* generation des dim: commande SI x,y; x et y = dim en cm */
char csize[256];
sprintf( csize, "%2.3f", (float) CharSize * CharScale * 0.000254 );
sprintf( line, "SI %s, %s;\n", csize, csize );
break;
}
case PLOT_FORMAT_POST:
/* Reglage de l'epaisseur de traits des textes */
sprintf( line, "%d setlinewidth\n", TextWidth );
break;
default:
*line = 0;
break;
}
fputs( line, aFile );
switch( format )
{
default:
case PLOT_FORMAT_POST:
g_PlotOffset.x = 0;
g_PlotOffset.y = 0;
InitPlotParametresPS( g_PlotOffset, SheetPS, scale_x, scale_x );
break;
case PLOT_FORMAT_HPGL:
InitPlotParametresHPGL( g_PlotOffset, scale_x, scale_x );
break;
}
/* Trace des informations */
/* Trace de "Infos" */
plotX = marge + 1000;
plotY = CharSize + 1000;
x = plotX; y = plotY;
x = +g_PlotOffset.x + (int) (x * fTextScale);
y = g_PlotOffset.y - (int) (y * fTextScale);
plotY += (int) ( intervalle * 1.2) + 200;
switch( format )
{
case PLOT_FORMAT_HPGL:
sprintf( line, "PU %d, %d; LBInfos\03;\n",
x + (int) (intervalle * CharScale * fTextScale),
y - (int) (CharSize / 2 * CharScale * fTextScale) );
fputs( line, aFile );
break;
case PLOT_FORMAT_POST:
wxString Text = wxT( "Infos" );
Plot_1_texte( format, Text, 0, TextWidth,
x, y,
(int) (CharSize * CharScale), (int) (CharSize * CharScale),
FALSE );
break;
}
for( ii = 0; ii < aToolListBuffer.size(); ii++ )
{
int plot_diam;
if( aToolListBuffer[ii].m_TotalCount == 0 )
continue;
plot_diam = (int) (aToolListBuffer[ii].m_Diameter);
x = plotX; y = plotY;
x = -g_PlotOffset.x + (int) (x * fTextScale);
y = g_PlotOffset.y - (int) (y * fTextScale);
PlotDrillSymbol( wxPoint( x, y ), plot_diam, ii, format );
intervalle = (int) (CharSize * CharScale) + TextWidth;
intervalle = (int) ( intervalle * 1.2);
if( intervalle < (plot_diam + 200 + TextWidth) )
intervalle = plot_diam + 200 + TextWidth;
int rayon = plot_diam / 2;
x = plotX + rayon + (int) (CharSize * CharScale); y = plotY;
x = -g_PlotOffset.x + (int) (x * fTextScale);
y = g_PlotOffset.y - (int) (y * fTextScale);
/* Trace de la legende associee */
switch( format )
{
case PLOT_FORMAT_HPGL:
// List the diameter of each drill in the selected Drill Unit,
// and then its diameter in the other Drill Unit.
if( aUnit_Drill_is_Inch )
sprintf( line, "PU %d, %d; LB%2.3f\" / %2.2fmm ",
x + (int) (intervalle * CharScale * fTextScale),
y - (int) (CharSize / 2 * CharScale * fTextScale),
float (aToolListBuffer[ii].m_Diameter) * 0.0001,
float (aToolListBuffer[ii].m_Diameter) * 0.00254 );
else
sprintf( line, "PU %d, %d; LB%2.2fmm / %2.3f\" ",
x + (int) (intervalle * CharScale * fTextScale),
y - (int) (CharSize / 2 * CharScale * fTextScale),
float (aToolListBuffer[ii].m_Diameter) * 0.00254,
float (aToolListBuffer[ii].m_Diameter) * 0.0001 );
fputs( line, aFile );
// Now list how many holes and ovals are associated with each drill.
if( ( aToolListBuffer[ii].m_TotalCount == 1 ) &&
( aToolListBuffer[ii].m_OvalCount == 0 ) )
sprintf( line, "(1 hole)\n" );
else if( aToolListBuffer[ii].m_TotalCount == 1 ) // && ( buffer[ii]m_OvalCount == 1 )
sprintf( line, "(1 hole) (with 1 oblong)\n" );
else if( aToolListBuffer[ii].m_OvalCount == 0 )
sprintf( line, "(%d holes)\n",
aToolListBuffer[ii].m_TotalCount );
else if( aToolListBuffer[ii].m_OvalCount == 1 )
sprintf( line, "(%d holes) (with 1 oblong)\n",
aToolListBuffer[ii].m_TotalCount );
else // if ( aToolListBuffer[ii]m_OvalCount > 1 )
sprintf( line, "(%d holes) (with %d oblongs)\n",
aToolListBuffer[ii].m_TotalCount,
aToolListBuffer[ii].m_OvalCount );
fputs( line, aFile );
fputs( "\03;\n", aFile );
break;
case PLOT_FORMAT_POST:
// List the diameter of each drill in the selected Drill Unit,
// and then its diameter in the other Drill Unit.
if( aUnit_Drill_is_Inch )
sprintf( line, "%2.3f\" / %2.2fmm ",
float (aToolListBuffer[ii].m_Diameter) * 0.0001,
float (aToolListBuffer[ii].m_Diameter) * 0.00254 );
else
sprintf( line, "%2.2fmm / %2.3f\" ",
float (aToolListBuffer[ii].m_Diameter) * 0.00254,
float (aToolListBuffer[ii].m_Diameter) * 0.0001 );
msg = CONV_FROM_UTF8( line );
// Now list how many holes and ovals are associated with each drill.
if( ( aToolListBuffer[ii].m_TotalCount == 1 ) &&
( aToolListBuffer[ii].m_OvalCount == 0 ) )
sprintf( line, "(1 hole)" );
else if( aToolListBuffer[ii].m_TotalCount == 1 ) // && ( aToolListBuffer[ii]m_OvalCount == 1 )
sprintf( line, "(1 hole) (with 1 oblong)" );
else if( aToolListBuffer[ii].m_OvalCount == 0 )
sprintf( line, "(%d holes)",
aToolListBuffer[ii].m_TotalCount );
else if( aToolListBuffer[ii].m_OvalCount == 1 )
sprintf( line, "(%d holes) (with 1 oblong)",
aToolListBuffer[ii].m_TotalCount );
else // if ( aToolListBuffer[ii]m_OvalCount > 1 )
sprintf( line, "(%d holes) (with %d oblongs)",
aToolListBuffer[ii].m_TotalCount,
aToolListBuffer[ii].m_OvalCount );
msg += CONV_FROM_UTF8( line );
Plot_1_texte( format, msg, 0, TextWidth,
x, y,
(int) (CharSize * CharScale),
(int) (CharSize * CharScale),
FALSE );
break;
}
plotY += intervalle;
}
switch( format )
{
case PLOT_FORMAT_HPGL:
CloseFileHPGL( aFile );
break;
case PLOT_FORMAT_POST:
CloseFilePS( aFile );
break;
}
setlocale( LC_NUMERIC, "" ); // Revert to local notation for float numbers
g_PlotOrient = old_g_PlotOrient;
}
/****************************************************************************************/
void Gen_Drill_PcbMap( BOARD* aPcb, FILE* aFile,
std::vector<HOLE_INFO>& aHoleListBuffer,
std::vector<DRILL_TOOL>& aToolListBuffer,
int format )
/****************************************************************************************/
/** Creates the drill map aFile in HPGL or POSTSCRIPT format
* @param aPcb BOARD
* @param aFile = output aFile
* @param aHoleListBuffer = std::vector<HOLE_INFO> list of holes descriptors
* @param aToolListBuffer = std::vector<DRILL_TOOL> drill list buffer
* @param format = ouput format (hpgl / ps)
*/
{
wxPoint pos;
/* create the drill list */
if( aToolListBuffer.size() > 13 )
{
DisplayInfo( NULL,
_(
" Drill map: Too many diameter values to draw to draw one symbol per drill value (max 13)\nPlot uses circle shape for some drill values" ),
10 );
}
// Plot the drill map:
for( unsigned ii = 0; ii < aHoleListBuffer.size(); ii++ )
{
pos.x = aHoleListBuffer[ii].m_Hole_Pos_X;
pos.y = aHoleListBuffer[ii].m_Hole_Pos_Y;
if( aHoleListBuffer[ii].m_Hole_Shape == 0 )
{
PlotDrillSymbol( pos, aHoleListBuffer[ii].m_Hole_Diameter,
aHoleListBuffer[ii].m_Tool_Reference - 1,
format );
}
else
{
wxSize oblong_size;
oblong_size.x = aHoleListBuffer[ii].m_Hole_SizeX;
oblong_size.y = aHoleListBuffer[ii].m_Hole_SizeY;
PlotOvalDrillSymbol( pos, oblong_size, aHoleListBuffer[ii].m_Hole_Orient, format );
}
}
}
/************************************************************************************/
void PlotDrillSymbol( const wxPoint& position, int diametre, int aShapeId, int format )
/************************************************************************************/
/* Trace un motif de numero de forme aShapeId, aux coord x0, y0.
* x0, y0 = coordonnees tables
* diametre = diametre (coord table) du trou
* aShapeId = index ( permet de generer des formes caract )
*/
{
int rayon = diametre / 2;
void (*FctPlume)( wxPoint pos, int state );
int x0, y0;
x0 = position.x; y0 = position.y;
FctPlume = Move_Plume_HPGL;
if( format == PLOT_FORMAT_POST )
FctPlume = LineTo_PS;
switch( aShapeId )
{
case 0: /* vias : forme en X */
FctPlume( wxPoint( x0 - rayon, y0 - rayon ), 'U' );
FctPlume( wxPoint( x0 + rayon, y0 + rayon ), 'D' );
FctPlume( wxPoint( x0 + rayon, y0 - rayon ), 'U' );
FctPlume( wxPoint( x0 - rayon, y0 + rayon ), 'D' );
break;
case 1: /* Cercle */
if( format == PLOT_FORMAT_HPGL )
trace_1_pastille_RONDE_HPGL( wxPoint( x0, y0 ), diametre, FILAIRE );
if( format == PLOT_FORMAT_POST )
trace_1_pastille_RONDE_POST( wxPoint( x0, y0 ), diametre, FILAIRE );
break;
case 2: /* forme en + */
FctPlume( wxPoint( x0, y0 - rayon ), 'U' );
FctPlume( wxPoint( x0, y0 + rayon ), 'D' );
FctPlume( wxPoint( x0 + rayon, y0 ), 'U' );
FctPlume( wxPoint( x0 - rayon, y0 ), 'D' );
break;
case 3: /* forme en X cercle */
FctPlume( wxPoint( x0 - rayon, y0 - rayon ), 'U' );
FctPlume( wxPoint( x0 + rayon, y0 + rayon ), 'D' );
FctPlume( wxPoint( x0 + rayon, y0 - rayon ), 'U' );
FctPlume( wxPoint( x0 - rayon, y0 + rayon ), 'D' );
if( format == PLOT_FORMAT_HPGL )
trace_1_pastille_RONDE_HPGL( wxPoint( x0, y0 ), diametre, FILAIRE );
if( format == PLOT_FORMAT_POST )
trace_1_pastille_RONDE_POST( wxPoint( x0, y0 ), diametre, FILAIRE );
break;
case 4: /* forme en cercle barre de - */
FctPlume( wxPoint( x0 - rayon, y0 ), 'U' );
FctPlume( wxPoint( x0 + rayon, y0 ), 'D' );
if( format == PLOT_FORMAT_HPGL )
trace_1_pastille_RONDE_HPGL( wxPoint( x0, y0 ), diametre, FILAIRE );
if( format == PLOT_FORMAT_POST )
trace_1_pastille_RONDE_POST( wxPoint( x0, y0 ), diametre, FILAIRE );
break;
case 5: /* forme en cercle barre de | */
FctPlume( wxPoint( x0, y0 - rayon ), 'U' );
FctPlume( wxPoint( x0, y0 + rayon ), 'D' );
if( format == PLOT_FORMAT_HPGL )
trace_1_pastille_RONDE_HPGL( wxPoint( x0, y0 ), diametre, FILAIRE );
if( format == PLOT_FORMAT_POST )
trace_1_pastille_RONDE_POST( wxPoint( x0, y0 ), diametre, FILAIRE );
break;
case 6: /* forme en carre */
if( format == PLOT_FORMAT_HPGL )
trace_1_pad_TRAPEZE_HPGL( wxPoint( x0, y0 ), wxSize( rayon, rayon ), wxSize( 0,
0 ), 0,
FILAIRE );
if( format == PLOT_FORMAT_POST )
trace_1_pad_TRAPEZE_POST( wxPoint( x0, y0 ), wxSize( rayon, rayon ), wxSize( 0,
0 ), 0,
FILAIRE );
break;
case 7: /* forme en losange */
if( format == PLOT_FORMAT_HPGL )
trace_1_pad_TRAPEZE_HPGL( wxPoint( x0, y0 ), wxSize( rayon, rayon ), wxSize( 0,
0 ), 450,
FILAIRE );
if( format == PLOT_FORMAT_POST )
trace_1_pad_TRAPEZE_POST( wxPoint( x0, y0 ), wxSize( rayon, rayon ), wxSize( 0,
0 ), 450,
FILAIRE );
break;
case 8: /* forme en carre barre par un X*/
FctPlume( wxPoint( x0 - rayon, y0 - rayon ), 'U' );
FctPlume( wxPoint( x0 + rayon, y0 + rayon ), 'D' );
FctPlume( wxPoint( x0 + rayon, y0 - rayon ), 'U' );
FctPlume( wxPoint( x0 - rayon, y0 + rayon ), 'D' );
if( format == PLOT_FORMAT_HPGL )
trace_1_pad_TRAPEZE_HPGL( wxPoint( x0, y0 ), wxSize( rayon, rayon ), wxSize( 0,
0 ), 0,
FILAIRE );
if( format == PLOT_FORMAT_POST )
trace_1_pad_TRAPEZE_POST( wxPoint( x0, y0 ), wxSize( rayon, rayon ), wxSize( 0,
0 ), 0,
FILAIRE );
break;
case 9: /* forme en losange barre par un +*/
FctPlume( wxPoint( x0, y0 - rayon ), 'U' );
FctPlume( wxPoint( x0, y0 + rayon ), 'D' );
FctPlume( wxPoint( x0 + rayon, y0 ), 'U' );
FctPlume( wxPoint( x0 - rayon, y0 ), 'D' );
if( format == PLOT_FORMAT_HPGL )
trace_1_pad_TRAPEZE_HPGL( wxPoint( x0, y0 ), wxSize( rayon, rayon ), wxSize( 0,
0 ), 450,
FILAIRE );
if( format == PLOT_FORMAT_POST )
trace_1_pad_TRAPEZE_POST( wxPoint( x0, y0 ), wxSize( rayon, rayon ), wxSize( 0,
0 ), 450,
FILAIRE );
break;
case 10: /* forme en carre barre par un '/' */
FctPlume( wxPoint( x0 - rayon, y0 - rayon ), 'U' );
FctPlume( wxPoint( x0 + rayon, y0 + rayon ), 'D' );
if( format == PLOT_FORMAT_HPGL )
trace_1_pad_TRAPEZE_HPGL( wxPoint( x0, y0 ), wxSize( rayon, rayon ), wxSize( 0,
0 ), 0,
FILAIRE );
if( format == PLOT_FORMAT_POST )
trace_1_pad_TRAPEZE_POST( wxPoint( x0, y0 ), wxSize( rayon, rayon ), wxSize( 0,
0 ), 0,
FILAIRE );
break;
case 11: /* forme en losange barre par un |*/
FctPlume( wxPoint( x0, y0 - rayon ), 'U' );
FctPlume( wxPoint( x0, y0 + rayon ), 'D' );
if( format == PLOT_FORMAT_HPGL )
trace_1_pad_TRAPEZE_HPGL( wxPoint( x0, y0 ), wxSize( rayon, rayon ), wxSize( 0,
0 ), 450,
FILAIRE );
if( format == PLOT_FORMAT_POST )
trace_1_pad_TRAPEZE_POST( wxPoint( x0, y0 ), wxSize( rayon, rayon ), wxSize( 0,
0 ), 450,
FILAIRE );
break;
case 12: /* forme en losange barre par un -*/
FctPlume( wxPoint( x0 - rayon, y0 ), 'U' );
FctPlume( wxPoint( x0 + rayon, y0 ), 'D' );
if( format == PLOT_FORMAT_HPGL )
trace_1_pad_TRAPEZE_HPGL( wxPoint( x0, y0 ), wxSize( rayon, rayon ), wxSize( 0,
0 ), 450,
FILAIRE );
if( format == PLOT_FORMAT_POST )
trace_1_pad_TRAPEZE_POST( wxPoint( x0, y0 ), wxSize( rayon, rayon ), wxSize( 0,
0 ), 450,
FILAIRE );
break;
default:
if( format == PLOT_FORMAT_HPGL )
trace_1_pastille_RONDE_HPGL( wxPoint( x0, y0 ), diametre, FILAIRE );
if( format == PLOT_FORMAT_POST )
trace_1_pastille_RONDE_POST( wxPoint( x0, y0 ), diametre, FILAIRE );
break;
}
if( format == PLOT_FORMAT_HPGL )
Plume_HPGL( 'U' );
}
/*********************************************************************************************/
void PlotOvalDrillSymbol( const wxPoint& position, const wxSize& size, int orient, int format )
/*********************************************************************************************/
/* Draws an oblong hole.
* because functions to draw oblong shapes exist to draw oblong pads, Use they.
*/
{
switch( format )
{
case PLOT_FORMAT_HPGL:
trace_1_pastille_OVALE_HPGL( position, size, orient, FILAIRE );
break;
case PLOT_FORMAT_POST:
trace_1_pastille_OVALE_POST( position, size, orient, FILAIRE );
break;
}
}
/**************************************************************************************************/
void GenDrillReportFile( FILE* aFile, const wxString& aBoardFilename,
std::vector<DRILL_TOOL>& aToolListBuffer, bool aUnit_Drill_is_Inch )
/*************************************************************************************************/
/*
* Create a list of drill values and drill count
*/
{
unsigned TotalHoleCount;
char line[1024];
fprintf( aFile, "Drill report for %s\n", CONV_TO_UTF8( aBoardFilename ) );
fprintf( aFile, "Created on %s\n", DateAndTime( line ) );
// List which Drill Unit option had been selected for the associated drill aFile.
if( aUnit_Drill_is_Inch )
fputs( "Selected Drill Unit: Imperial (\")\n\n", aFile );
else
fputs( "Selected Drill Unit: Metric (mm)\n\n", aFile );
TotalHoleCount = 0;
for( unsigned ii = 0; ii < aToolListBuffer.size(); ii++ )
{
// List the tool number assigned to each drill,
// then its diameter in the selected Drill Unit,
// and then its diameter in the other Drill Unit.
if( aUnit_Drill_is_Inch )
sprintf( line, "T%d %2.3f\" %2.2fmm ",
ii + 1,
float (aToolListBuffer[ii].m_Diameter) * 0.0001,
float (aToolListBuffer[ii].m_Diameter) * 0.00254 );
else
sprintf( line, "T%d %2.2fmm %2.3f\" ",
ii + 1,
float (aToolListBuffer[ii].m_Diameter) * 0.00254,
float (aToolListBuffer[ii].m_Diameter) * 0.0001 );
fputs( line, aFile );
// Now list how many holes and ovals are associated with each drill.
if( ( aToolListBuffer[ii].m_TotalCount == 1 ) && ( aToolListBuffer[ii].m_OvalCount == 0 ) )
sprintf( line, "(1 hole)\n" );
else if( aToolListBuffer[ii].m_TotalCount == 1 )
sprintf( line, "(1 hole) (with 1 oblong)\n" );
else if( aToolListBuffer[ii].m_OvalCount == 0 )
sprintf( line, "(%d holes)\n",
aToolListBuffer[ii].m_TotalCount );
else if( aToolListBuffer[ii].m_OvalCount == 1 )
sprintf( line, "(%d holes) (with 1 oblong)\n",
aToolListBuffer[ii].m_TotalCount );
else // if ( buffer[ii]m_OvalCount > 1 )
sprintf( line, "(%d holes) (with %d oblongs)\n",
aToolListBuffer[ii].m_TotalCount,
aToolListBuffer[ii].m_OvalCount );
fputs( line, aFile );
TotalHoleCount += aToolListBuffer[ii].m_TotalCount;
}
sprintf( line, "\ntotal holes count %d\n", TotalHoleCount );
fputs( line, aFile );
fclose( aFile );
}
pcbnew/gen_holes_and_tools_lists_for_drill.cpp 0 → 100644
View file @ 7d676fbf
/*************************************************************************/
/* Functions to create drill data used to create files and report files */
/*************************************************************************/
#include "fctsys.h"
using namespace std;
#include <vector>
#include "common.h"
#include "plot_common.h"
#include "pcbnew.h"
#include "pcbplot.h"
#include "macros.h"
#include "gendrill.h"
/* Local Functions */
/* Compare function used for sorting holes by increasing diameter value */
static bool CmpHoleDiameterValue( const HOLE_INFO& a, const HOLE_INFO& b )
{
return a.m_Hole_Diameter < b.m_Hole_Diameter;
}
/**
* Function BuildHolesList
* Create the list of holes and tools for a given board
* The list is sorted by incraesin drill values
* Only holes from aFirstLayer to aLastLayer copper layers are listed (for vias, because pad holes are always through holes)
* @param Pcb : the given board
* @param aHoleListBuffer : the std::vector<HOLE_INFO> to fill with pcb holes info
* @param aToolListBuffer : the std::vector<DRILL_TOOL> to fill with tools to use
* @param aFirstLayer = first layer to consider
* @param aLastLayer = last layer to consider
*/
void Build_Holes_List( BOARD* aPcb,
std::vector<HOLE_INFO>& aHoleListBuffer,
std::vector<DRILL_TOOL>& aToolListBuffer,
int aFirstLayer, int aLastLayer )
{
HOLE_INFO new_hole;
int hole_value;
aHoleListBuffer.clear();
aToolListBuffer.clear();
if( aFirstLayer > aLastLayer )
EXCHG( aFirstLayer, aLastLayer );
/* build hole list for vias */
TRACK* track = aPcb->m_Track;
for( ; track != NULL; track = track->Next() )
{
if( track->Type() != TYPEVIA )
continue;
SEGVIA* via = (SEGVIA*) track;
hole_value = via->GetDrillValue();
if( hole_value == 0 )
continue;
new_hole.m_Tool_Reference = -1; // Flag value for Not initialized
new_hole.m_Hole_Orient = 0;
new_hole.m_Hole_Diameter = hole_value;
new_hole.m_Hole_SizeX = new_hole.m_Hole_SizeY = new_hole.m_Hole_Diameter;
new_hole.m_Hole_Shape = 0; // hole shape: round
new_hole.m_Hole_Pos_X = via->m_Start.x;
new_hole.m_Hole_Pos_Y = via->m_Start.y; // hole position
via->ReturnLayerPair( &new_hole.m_Hole_Top_Layer, &new_hole.m_Hole_Bottom_Layer );
// ReturnLayerPair return params with m_Hole_Bottom_Layer < m_Hole_Top_Layer
if( new_hole.m_Hole_Bottom_Layer > aFirstLayer )
continue;
if( new_hole.m_Hole_Top_Layer < aLastLayer )
continue;
aHoleListBuffer.push_back( new_hole );
}
/* build hole list for pads */
MODULE* Module = aPcb->m_Modules;
for( ; Module != NULL; Module = Module->Next() )
{
/* Read and analyse pads */
D_PAD* pad = Module->m_Pads;
for( ; pad != NULL; pad = pad->Next() )
{
if( pad->m_Drill.x == 0 )
continue;
new_hole.m_Tool_Reference = -1; // Flag is: Not initialized
new_hole.m_Hole_Orient = pad->m_Orient;
new_hole.m_Hole_Shape = 0; // hole shape: round
new_hole.m_Hole_Diameter = min( pad->m_Drill.x, pad->m_Drill.x );
new_hole.m_Hole_SizeX = new_hole.m_Hole_SizeY = new_hole.m_Hole_Diameter;
if( pad->m_DrillShape != PAD_CIRCLE )
new_hole.m_Hole_Shape = 1; // oval flag set
new_hole.m_Hole_SizeX = pad->m_Drill.x;
new_hole.m_Hole_SizeY = pad->m_Drill.y;
new_hole.m_Hole_Pos_X = pad->m_Pos.x;
new_hole.m_Hole_Pos_Y = pad->m_Pos.y; // hole position
new_hole.m_Hole_Bottom_Layer = COPPER_LAYER_N;
new_hole.m_Hole_Top_Layer = LAYER_CMP_N; // pad holes are through holes
aHoleListBuffer.push_back( new_hole );
}
}
// Sort holes per increasing diameter value
sort( aHoleListBuffer.begin(), aHoleListBuffer.end(), CmpHoleDiameterValue );
// build the tool list
int LastHole = -1; /* Set to not initialised
* (this is a value not used for aHoleListBuffer[ii].m_Hole_Diameter) */
DRILL_TOOL new_tool( 0 );
unsigned jj;
for( unsigned ii = 0; ii < aHoleListBuffer.size(); ii++ )
{
if( aHoleListBuffer[ii].m_Hole_Diameter != LastHole )
{
new_tool.m_Diameter = ( aHoleListBuffer[ii].m_Hole_Diameter );
aToolListBuffer.push_back( new_tool );
LastHole = new_tool.m_Diameter;
}
jj = aToolListBuffer.size();
if( jj == 0 )
continue; // Should not occurs
aHoleListBuffer[ii].m_Tool_Reference = jj; // Tool value Initialized (value >= 1)
aToolListBuffer.back().m_TotalCount++;
if( aHoleListBuffer[ii].m_Hole_Shape )
aToolListBuffer.back().m_OvalCount++;
}
}
pcbnew/gendrill.cpp
View file @ 7d676fbf
......@@ -15,6 +15,8 @@ using namespace std;
#include "pcbplot.h"
#include "macros.h"
#include "gendrill.h"
/*
* Creates the drill files in EXCELLON format
* Number format:
......@@ -30,52 +32,14 @@ using namespace std;
* dialog_gendrill.cpp is the file (included in this file) which handles the Dialog box for drill file generation
*/
class DRILL_TOOL
{
public:
int m_Diameter;
int m_TotalCount;
int m_OvalCount;
public:
DRILL_TOOL( int diametre )
{
m_TotalCount = 0;
m_OvalCount = 0;
m_Diameter = diametre;
}
};
/* drill precision format */
class DrillPrecision
{
public:
int m_lhs;
int m_rhs;
public:
DrillPrecision( int l, int r ) { m_lhs = l; m_rhs = r; }
};
/* zeros format */
enum zeros_fmt {
DECIMAL_FORMAT,
SUPPRESS_LEADING,
SUPPRESS_TRAILING,
KEEP_ZEROS
};
/* Local Function */
static void Gen_Line_EXCELLON( char* line, float x, float y );
static void Write_End_Of_File_Drill();
static void PlotDrillSymbol( const wxPoint& position, int diametre, int num_forme, int format );
static void PlotOvalDrillSymbol( const wxPoint& position,
const wxSize& size,
int orient,
int format );
static void Write_End_Of_File_Drill( FILE* aFile );
/* Local Variables : */
static float conv_unit; /* coeff de conversion des unites drill / pcb */
static int s_Unit_Drill_is_Inch = TRUE; /* INCH,LZ (2:4) */
static float s_ConversionUnits; /* coeff de conversion des unites drill / pcb */
static int s_Unit_Drill_is_Inch = TRUE; /* INCH,LZ (2:4) */
static int s_Zeros_Format = DECIMAL_FORMAT;
static DrillPrecision s_Precision( 2, 4 );
......@@ -85,6 +49,7 @@ static bool Minimal = false;
static bool Mirror = true;
static std::vector<DRILL_TOOL> s_ToolListBuffer;
static std::vector<HOLE_INFO> s_HoleListBuffer;
// Keywords for read and write config
#define ZerosFormatKey wxT( "DrillZerosFormat" )
......@@ -97,12 +62,6 @@ static std::vector<DRILL_TOOL> s_ToolListBuffer;
#include "dialog_gendrill.cpp" // Dialog box for drill file generation
/* Compare function used for sorting tools */
static bool CmpDrillDiameterTool( const DRILL_TOOL& a, const DRILL_TOOL& b )
{
return a.m_Diameter < b.m_Diameter;
}
/**********************************************/
void WinEDA_DrillFrame::InitDisplayParams( void )
......@@ -123,15 +82,15 @@ void WinEDA_DrillFrame::InitDisplayParams( void )
if( s_Zeros_Format==DECIMAL_FORMAT )
m_Choice_Precision->Enable( false );
msg = ReturnStringFromValue( g_UnitMetric,
g_DesignSettings.m_ViaDrill,
m_Parent->m_InternalUnits );
msg = ReturnStringFromValue( g_UnitMetric,
g_DesignSettings.m_ViaDrill,
m_Parent->m_InternalUnits );
msg += ReturnUnitSymbol( g_UnitMetric );
m_ViaDrillValue->SetLabel( msg );
msg = ReturnStringFromValue( g_UnitMetric,
g_DesignSettings.m_MicroViaDrill,
m_Parent->m_InternalUnits );
msg = ReturnStringFromValue( g_UnitMetric,
g_DesignSettings.m_MicroViaDrill,
m_Parent->m_InternalUnits );
msg += ReturnUnitSymbol( g_UnitMetric );
m_MicroViaDrillValue->SetLabel( msg );
......@@ -296,79 +255,106 @@ void WinEDA_DrillFrame::GenDrillFiles( wxCommandEvent& event )
*/
{
wxString FullFileName, Mask( wxT( "*" ) ), Ext( wxT( ".drl" ) );
int ii;
wxString msg;
bool ExistsBuriedVias = false; // If true, driil files are created layer pair by layer pair
int layer1 = COPPER_LAYER_N;
int layer2 = LAYER_CMP_N;
UpdateConfig(); /* set params and Save drill options */
m_Parent->MsgPanel->EraseMsgBox();
/* Set conversion scale depending on drill file units */
conv_unit = 0.0001; /* unites = INCHES */
s_ConversionUnits = 0.0001; /* unites = INCHES */
if( !s_Unit_Drill_is_Inch )
conv_unit = 0.000254; /* unites = mm */
s_ConversionUnits = 0.000254; /* unites = mm */
if( m_MicroViasCount || m_BlindOrBuriedViasCount )
ExistsBuriedVias = true;
if( ExistsBuriedVias )
layer2 = layer1 + 1;;
/* Get the file name */
FullFileName = m_Parent->m_CurrentScreen->m_FileName;
ChangeFileNameExt( FullFileName, Ext );
Mask += Ext;
FullFileName = EDA_FileSelector( _( "Drill file" ),
wxEmptyString, /* Chemin par defaut */
FullFileName, /* nom fichier par defaut */
Ext, /* extension par defaut */
Mask, /* Masque d'affichage */
this,
wxFD_SAVE,
TRUE
);
if( FullFileName != wxEmptyString )
for( ; ; )
{
dest = wxFopen( FullFileName, wxT( "w" ) );
if( dest == 0 )
FullFileName = m_Parent->m_CurrentScreen->m_FileName;
wxString layer_extend;
layer_extend.Empty();
if( ExistsBuriedVias )
{
msg = _( "Unable to create file " ) + FullFileName;
DisplayError( this, msg );
EndModal( 0 );
return;
if( layer1 == COPPER_LAYER_N )
layer_extend << wxT( "-copper" );
else
layer_extend << wxT( "-inner" ) << layer1;
if( layer2 == LAYER_CMP_N )
layer_extend << wxT( "-cmp" );
else
layer_extend << wxT( "-inner" ) << layer2;
}
layer_extend << Ext;
ChangeFileNameExt( FullFileName, layer_extend );
FullFileName = EDA_FileSelector( _( "Drill file" ),
wxEmptyString, /* Chemin par defaut */
FullFileName, /* nom fichier par defaut */
Ext, /* extension par defaut */
Mask, /* Masque d'affichage */
this,
wxFD_SAVE,
TRUE
);
Build_Holes_List( m_Parent->m_Pcb, s_HoleListBuffer, s_ToolListBuffer,
layer1, layer2 );
if( FullFileName != wxEmptyString )
{
dest = wxFopen( FullFileName, wxT( "w" ) );
if( dest == 0 )
{
msg = _( "Unable to create file " ) + FullFileName;
DisplayError( this, msg );
EndModal( 0 );
return;
}
/* Init : */
Affiche_1_Parametre( m_Parent, 0, _( "File" ), FullFileName, BLUE );
setlocale( LC_NUMERIC, "C" ); // Use the standard notation for float numbers
Init_Drill();
Create_Drill_File_EXCELLON( s_HoleListBuffer, s_ToolListBuffer );
}
ii = Gen_Liste_Tools( s_ToolListBuffer, TRUE );
switch( m_Choice_Drill_Map->GetSelection() )
{
case 0:
break;
msg.Printf( wxT( "%d" ), ii );
Affiche_1_Parametre( m_Parent, 30, _( "Tools" ), msg, BROWN );
case 1:
GenDrillMap( FullFileName,
s_HoleListBuffer,
s_ToolListBuffer,
PLOT_FORMAT_HPGL );
break;
ii = Create_Drill_File_EXCELLON( s_ToolListBuffer );
msg.Printf( wxT( "%d" ), ii );
Affiche_1_Parametre( m_Parent, 45, _( "Drill" ), msg, GREEN );
case 2:
GenDrillMap( FullFileName,
s_HoleListBuffer,
s_ToolListBuffer,
PLOT_FORMAT_POST );
break;
}
Write_End_Of_File_Drill();
setlocale( LC_NUMERIC, "" ); // Revert to locale float notation
}
if( m_Choice_Drill_Report->GetSelection() > 0 )
GenDrillReport( FullFileName, s_ToolListBuffer );
switch( m_Choice_Drill_Map->GetSelection() )
{
case 0:
break;
case 1:
GenDrillMap( s_ToolListBuffer, PLOT_FORMAT_HPGL );
break;
if( !ExistsBuriedVias )
break;
case 2:
GenDrillMap( s_ToolListBuffer, PLOT_FORMAT_POST );
break;
if( layer2 >= LAYER_CMP_N ) // no more layer pair to consider
break;
layer1++; layer2++; // use next layer pair
if( layer2 == g_DesignSettings.m_CopperLayerCount - 1 ) // The last layer is reached
layer2 = LAYER_CMP_N; // the last layer is always the component layer
}
if( m_Choice_Drill_Report->GetSelection() > 0 )
GenDrillReport( s_ToolListBuffer );
EndModal( 0 );
}
......@@ -396,181 +382,166 @@ void WinEDA_DrillFrame::UpdatePrecisionOptions( wxCommandEvent& event )
/**********************************************************************************/
int WinEDA_DrillFrame::Create_Drill_File_EXCELLON( std::vector<DRILL_TOOL>& buffer )
int WinEDA_DrillFrame::Create_Drill_File_EXCELLON( std::vector<HOLE_INFO>& aHoleListBuffer,
std::vector<DRILL_TOOL>& aToolListBuffer )
/**********************************************************************************/
/* Create the drill file in EXCELLON format
* Return hole count
* buffer: Drill tools list
/**
* Create the drill file in EXCELLON format
* @return hole count
* @param aHoleListBuffer = hole descriptor list
* @param aToolListBuffer = Drill tools list
*/
{
TRACK* pt_piste;
D_PAD* pt_pad;
MODULE* Module;
int diam, holes_count;
int x0, y0, xf, yf, xc, yc;
float xt, yt;
char line[1024];
/* Create the pad drill list : */
int diam, holes_count;
int x0, y0, xf, yf, xc, yc;
float xt, yt;
char line[1024];
setlocale( LC_NUMERIC, "C" ); // Use the standard notation for float numbers
Write_Excellon_Header( dest );
holes_count = 0;
int tool_reference = -2;
/* Read the hole file */
for( unsigned ii = 0; ii < buffer.size(); ii++ )
/* Write the tool list */
for( unsigned ii = 0; ii < aToolListBuffer.size(); ii++ )
{
sprintf( line, "T%d\n", ii + 1 ); fputs( line, dest );
/* Read the via list */
{
pt_piste = m_Parent->m_Pcb->m_Track;
for( ; pt_piste != NULL; pt_piste = (TRACK*) pt_piste->Pnext )
{
if( pt_piste->Type() != TYPEVIA )
continue;
int via_drill = pt_piste->GetDrillValue();
if( via_drill == 0 )
continue;
if( buffer[ii].m_Diameter != via_drill )
continue;
x0 = pt_piste->m_Start.x - File_Drill_Offset.x;
y0 = pt_piste->m_Start.y - File_Drill_Offset.y;
if( !Mirror )
y0 *= -1;
xt = float (x0) * conv_unit; yt = float (y0) * conv_unit;
if( s_Unit_Drill_is_Inch )
{
Gen_Line_EXCELLON( line, xt, yt );
}
else
{
/* metric 3:3 */
Gen_Line_EXCELLON( line, xt * 10, yt * 10 );
}
if( s_Unit_Drill_is_Inch ) /* does it need T01, T02 or is T1,T2 ok?*/
sprintf( line, "T%dC%.3f\n", ii + 1,
float (aToolListBuffer[ii].m_Diameter) * s_ConversionUnits );
else
sprintf( line, "T%dC%.3f\n", ii + 1,
float (aToolListBuffer[ii].m_Diameter) * s_ConversionUnits * 10.0 );
fputs( line, dest );
holes_count++;
}
fputs( line, dest );
}
fputs( "%\n", dest );
if( !Minimal )
fputs( "M47\n", dest ); /* Operator message */
fputs( "G05\n", dest ); /* Drill mode */
/* Units : */
if( s_Unit_Drill_is_Inch && !Minimal )
fputs( "M72\n", dest ); /* M72 = inch mode */
else if( !Minimal )
fputs( "M71\n", dest ); /* M71 = metric mode */
/* Read the hole file and generate lines for normal holes (oblong holes will be created later) */
for( unsigned ii = 0; ii < aHoleListBuffer.size(); ii++ )
{
if( aHoleListBuffer[ii].m_Hole_Shape )
continue; // oblong holes will be created later
if( tool_reference != aHoleListBuffer[ii].m_Tool_Reference )
{
tool_reference = aHoleListBuffer[ii].m_Tool_Reference;
sprintf( line, "T%d\n", tool_reference );
fputs( line, dest );
}
/* Read pad list and create Drill infos for round holes only: */
Module = m_Parent->m_Pcb->m_Modules;
for( ; Module != NULL; Module = (MODULE*) Module->Pnext )
x0 = aHoleListBuffer[ii].m_Hole_Pos_X - File_Drill_Offset.x;
y0 = aHoleListBuffer[ii].m_Hole_Pos_Y - File_Drill_Offset.y;
if( !Mirror )
y0 *= -1;
xt = float (x0) * s_ConversionUnits; yt = float (y0) * s_ConversionUnits;
if( s_Unit_Drill_is_Inch )
{
/* Read and analyse pads */
pt_pad = (D_PAD*) Module->m_Pads;
for( ; pt_pad != NULL; pt_pad = (D_PAD*) pt_pad->Pnext )
{
if( pt_pad->m_DrillShape != PAD_CIRCLE )
continue;
diam = pt_pad->m_Drill.x;
if( diam == 0 )
continue;
if( diam != buffer[ii].m_Diameter )
continue;
/* Compute the hole coordinates: */
x0 = pt_pad->m_Pos.x - File_Drill_Offset.x;
y0 = pt_pad->m_Pos.y - File_Drill_Offset.y;
if( !Mirror )
y0 *= -1;
xt = float (x0) * conv_unit; yt = float (y0) * conv_unit;
if( s_Unit_Drill_is_Inch )
Gen_Line_EXCELLON( line, xt, yt );
else
Gen_Line_EXCELLON( line, xt * 10, yt * 10 );
Gen_Line_EXCELLON( line, xt, yt );
}
else
{
/* metric 3:3 */
Gen_Line_EXCELLON( line, xt * 10, yt * 10 );
}
fputs( line, dest );
holes_count++;
}
fputs( line, dest );
holes_count++;
}
/* ens analyse one module */
/* Read the hole file and generate lines for normal holes (oblong holes will be created later) */
tool_reference = -2; // set to a value not used for aHoleListBuffer[ii].m_Tool_Reference
for( unsigned ii = 0; ii < aHoleListBuffer.size(); ii++ )
{
if( aHoleListBuffer[ii].m_Hole_Shape == 0 )
continue; // wait for oblong holes
if( tool_reference != aHoleListBuffer[ii].m_Tool_Reference )
{
tool_reference = aHoleListBuffer[ii].m_Tool_Reference;
sprintf( line, "T%d\n", tool_reference );
fputs( line, dest );
}
// End analyse module list
diam = MIN( aHoleListBuffer[ii].m_Hole_SizeX, aHoleListBuffer[ii].m_Hole_SizeY );
if( diam == 0 )
continue;
/* Compute the hole coordinates: */
xc = x0 = xf = aHoleListBuffer[ii].m_Hole_Pos_X - File_Drill_Offset.x;
yc = y0 = yf = aHoleListBuffer[ii].m_Hole_Pos_Y - File_Drill_Offset.y;
/* Read pad list and create Drill infos for oblong holes only: */
Module = m_Parent->m_Pcb->m_Modules;
for( ; Module != NULL; Module = (MODULE*) Module->Pnext )
/* Compute the start and end coordinates for the shape */
if( aHoleListBuffer[ii].m_Hole_SizeX < aHoleListBuffer[ii].m_Hole_SizeY )
{
/* Analyse pad list for the module */
pt_pad = (D_PAD*) Module->m_Pads;
for( ; pt_pad != NULL; pt_pad = (D_PAD*) pt_pad->Pnext )
{
if( pt_pad->m_DrillShape != PAD_OVAL )
continue;
diam = MIN( pt_pad->m_Drill.x, pt_pad->m_Drill.y );
if( diam == 0 )
continue;
if( diam != buffer[ii].m_Diameter )
continue;
/* Compute the hole coordinates: */
xc = x0 = xf = pt_pad->m_Pos.x - File_Drill_Offset.x;
yc = y0 = yf = pt_pad->m_Pos.y - File_Drill_Offset.y;
/* Compute the start and end coordinates for the shape */
if( pt_pad->m_Drill.x < pt_pad->m_Drill.y )
{
int delta = (pt_pad->m_Drill.y - pt_pad->m_Drill.x) / 2;
y0 -= delta; yf += delta;
}
else
{
int delta = (pt_pad->m_Drill.x - pt_pad->m_Drill.y) / 2;
x0 -= delta; xf += delta;
}
RotatePoint( &x0, &y0, xc, yc, pt_pad->m_Orient );
RotatePoint( &xf, &yf, xc, yc, pt_pad->m_Orient );
if( !Mirror )
{
y0 *= -1; yf *= -1;
}
xt = float (x0) * conv_unit; yt = float (y0) * conv_unit;
if( s_Unit_Drill_is_Inch )
Gen_Line_EXCELLON( line, xt, yt );
else
Gen_Line_EXCELLON( line, xt * 10, yt * 10 );
/* remove the '\n' from end of line, because we must add the "G85" command to the line: */
for( int kk = 0; line[kk] != 0; kk++ )
if( line[kk] == '\n' || line[kk] =='\r' )
line[kk] = 0;
int delta = (aHoleListBuffer[ii].m_Hole_SizeY - aHoleListBuffer[ii].m_Hole_SizeX) / 2;
y0 -= delta; yf += delta;
}
else
{
int delta = (aHoleListBuffer[ii].m_Hole_SizeX - aHoleListBuffer[ii].m_Hole_SizeY ) / 2;
x0 -= delta; xf += delta;
}
RotatePoint( &x0, &y0, xc, yc, aHoleListBuffer[ii].m_Hole_Orient );
RotatePoint( &xf, &yf, xc, yc, aHoleListBuffer[ii].m_Hole_Orient );
fputs( line, dest );
fputs( "G85", dest ); // add the "G85" command
if( !Mirror )
{
y0 *= -1; yf *= -1;
}
xt = float (xf) * conv_unit; yt = float (yf) * conv_unit;
if( s_Unit_Drill_is_Inch )
Gen_Line_EXCELLON( line, xt, yt );
else
Gen_Line_EXCELLON( line, xt * 10, yt * 10 );
fputs( "G05\n", dest );
holes_count++;
}
xt = float (x0) * s_ConversionUnits; yt = float (y0) * s_ConversionUnits;
if( s_Unit_Drill_is_Inch )
Gen_Line_EXCELLON( line, xt, yt );
else
Gen_Line_EXCELLON( line, xt * 10, yt * 10 );
/* remove the '\n' from end of line, because we must add the "G85" command to the line: */
for( int kk = 0; line[kk] != 0; kk++ )
if( line[kk] == '\n' || line[kk] =='\r' )
line[kk] = 0;
/* End Analyse pad list for the module */
}
fputs( line, dest );
fputs( "G85", dest ); // add the "G85" command
/* End analyse modules for the current tool */
xt = float (xf) * s_ConversionUnits; yt = float (yf) * s_ConversionUnits;
if( s_Unit_Drill_is_Inch )
Gen_Line_EXCELLON( line, xt, yt );
else
Gen_Line_EXCELLON( line, xt * 10, yt * 10 );
fputs( "G05\n", dest );
holes_count++;
}
Write_End_Of_File_Drill( dest );
setlocale( LC_NUMERIC, "" ); // Revert to locale float notation
return holes_count;
}
/*****************************************************/
/***********************************************************************/
void Gen_Line_EXCELLON( char* line, float x, float y )
/*****************************************************/
/***********************************************************************/
/* Created a line like:
* X48000Y19500
* According to the selected format
*/
{
wxString xs, ys;
int xpad = s_Precision.m_lhs + s_Precision.m_rhs;
......@@ -640,211 +611,87 @@ void Gen_Line_EXCELLON( char* line, float x, float y )
}
/*************************************************************************/
int GetOrAddForet( std::vector<DRILL_TOOL>& buffer, int diameter )
/*************************************************************************/
/* Search the drill tool for the diameter "diameter"
* Create a new one if not found
* return the index in buffer
/************************************************************/
void WinEDA_DrillFrame::Write_Excellon_Header( FILE* aFile )
/************************************************************/
/* Print the DRILL file header. The full header is:
* M48
* ;DRILL file {PCBNEW (2007-11-29-b)} date 17/1/2008-21:02:35
* ;FORMAT={2:4 / absolute / Pouces / Suppression zeros de tte}
* R,T
* VER,1
* FMAT,2
* INCH,TZ
* TCST,OFF
* ICI,OFF
* ATC,ON
*/
{
unsigned ii;
if( diameter == 0 )
return -1;
/* Search for an existing tool: */
for( ii = 0; ii < buffer.size(); ii++ )
{
if( buffer[ii].m_Diameter == diameter ) /* found */
return ii;
}
/* No tool found, we must create a new one */
DRILL_TOOL new_tool( diameter );
buffer.push_back( new_tool );
return buffer.size() - 1;
}
/*********************************************************************************************/
int WinEDA_DrillFrame::Gen_Liste_Tools( std::vector<DRILL_TOOL>& buffer, bool print_header )
/*********************************************************************************************/
/* Etablit la liste des drill_tools de percage, dans l'ordre croissant des
* diametres
* Retourne:
* Nombre de Forets
*
* Fills the list of tools buffer
*/
{
D_PAD* pt_pad;
MODULE* Module;
unsigned ii;
int diam;
char line[1024];
buffer.clear();
/* Creates the via tools list*/
TRACK* pt_piste = m_Parent->m_Pcb->m_Track;
for( ; pt_piste != NULL; pt_piste = (TRACK*) pt_piste->Pnext )
{
if( pt_piste->Type() != TYPEVIA )
continue;
int via_drill = pt_piste->GetDrillValue();
if( via_drill == 0 )
continue;
ii = GetOrAddForet( buffer, via_drill );
if ( ii >= 0 )
buffer[ii].m_TotalCount++;
}
/* Create the pad tools : */
Module = m_Parent->m_Pcb->m_Modules;
for( ; Module != NULL; Module = (MODULE*) Module->Pnext )
{
/* See the pad list for hole sizes */
pt_pad = (D_PAD*) Module->m_Pads;
for( ; pt_pad != NULL; pt_pad = (D_PAD*) pt_pad->Pnext )
{
if( pt_pad->m_DrillShape == PAD_CIRCLE )
diam = pt_pad->m_Drill.x;
else
diam = MIN( pt_pad->m_Drill.x, pt_pad->m_Drill.y );
if( diam == 0 )
continue;
ii = GetOrAddForet( buffer, diam );
if ( ii >= 0 )
{
buffer[ii].m_TotalCount++;
if( pt_pad->m_DrillShape == PAD_OVAL )
buffer[ii].m_OvalCount++;
}
}
}
/* Sort drill_tools by increasing size */
sort( buffer.begin(), buffer.end(), CmpDrillDiameterTool );
/* Write the tool list in excellon file */
if( print_header )
{
for( ii = 0; ii < buffer.size(); ii++ )
{
if( s_Unit_Drill_is_Inch ) /* does it need T01, T02 or is T1,T2 ok?*/
sprintf( line, "T%dC%.3f\n", ii + 1,
float (buffer[ii].m_Diameter) * conv_unit );
else
sprintf( line, "T%dC%.3f\n", ii + 1,
float (buffer[ii].m_Diameter) * conv_unit * 10.0 );
fputs( line, dest );
}
fputs( "%\n", dest );
if( !Minimal )
fputs( "M47\n", dest ); /* Operator message */
fputs( "G05\n", dest ); /* Drill mode */
/* Units : */
if( s_Unit_Drill_is_Inch && !Minimal )
fputs( "M72\n", dest ); /* M72 = inch mode */
else if( !Minimal )
fputs( "M71\n", dest ); /* M71 = metric mode */
}
return buffer.size();
}
/***************************************/
void WinEDA_DrillFrame::Init_Drill()
/***************************************/
/* Print the DRILL file header */
{
char Line[256];
fputs( "M48\n", dest );
fputs( "M48\n", aFile );
if( !Minimal )
{
DateAndTime( Line );
wxString Title = g_Main_Title + wxT( " " ) + GetBuildVersion();
fprintf( dest, ";DRILL file {%s} date %s\n", CONV_TO_UTF8( Title ), Line );
fputs( ";FORMAT={", dest );
fputs( ";FORMAT={", aFile );
fprintf( dest, "%s / absolute / ",
CONV_TO_UTF8( m_Choice_Precision->GetStringSelection() ) );
fprintf( dest, "%s / ", CONV_TO_UTF8( m_Choice_Unit->GetStringSelection() ) );
fprintf( dest, "%s}\n", CONV_TO_UTF8( m_Choice_Zeros_Format->GetStringSelection() ) );
fputs( "R,T\nVER,1\nFMAT,2\n", dest );
fputs( "R,T\nVER,1\nFMAT,2\n", aFile );
}
if( s_Unit_Drill_is_Inch )
fputs( "INCH", dest ); // Si unites en INCHES
fputs( "INCH", aFile ); // Si unites en INCHES
else
fputs( "METRIC", dest ); // Si unites en mm
fputs( "METRIC", aFile ); // Si unites en mm
switch( s_Zeros_Format )
{
case SUPPRESS_LEADING:
case DECIMAL_FORMAT:
fputs( ",TZ\n", dest );
fputs( ",TZ\n", aFile );
break;
case SUPPRESS_TRAILING:
fputs( ",LZ\n", dest );
fputs( ",LZ\n", aFile );
break;
case KEEP_ZEROS:
fputs( ",TZ\n", dest ); // TZ is acceptable when all zeros are kept
fputs( ",TZ\n", aFile ); // TZ is acceptable when all zeros are kept
break;
}
if( !Minimal )
fputs( "TCST,OFF\nICI,OFF\nATC,ON\n", dest );
fputs( "TCST,OFF\nICI,OFF\nATC,ON\n", aFile );
}
/*****************************/
void Write_End_Of_File_Drill()
/*****************************/
/****************************************/
void Write_End_Of_File_Drill( FILE* aFile )
/****************************************/
{
//add if minimal here
fputs( "T0\nM30\n", dest ); fclose( dest );
fputs( "T0\nM30\n", aFile ); fclose( aFile );
}
/**********************************************************************************/
void WinEDA_DrillFrame::GenDrillMap( std::vector<DRILL_TOOL>& buffer, int format )
void WinEDA_DrillFrame::GenDrillMap( const wxString aFileName,
std::vector<HOLE_INFO>& aHoleListBuffer,
std::vector<DRILL_TOOL>& buffer, int format )
/**********************************************************************************/
/* Genere le plan de percage (Drill map) format HPGL ou POSTSCRIPT
*/
{
unsigned ii;
int x, y;
int plotX, plotY, TextWidth;
int intervalle = 0, CharSize = 0;
EDA_BaseStruct* PtStruct;
int old_g_PlotOrient = g_PlotOrient;
wxString FullFileName, Mask( wxT( "*" ) ), Ext;
char line[1024];
int dX, dY;
wxPoint BoardCentre;
int PlotMarge_in_mils = 400; // Margin in 1/1000 inch
int marge = PlotMarge_in_mils * U_PCB;
wxSize SheetSize;
float fTextScale = 1.0;
double scale_x = 1.0, scale_y = 1.0;
Ki_PageDescr* SheetPS = NULL;
wxString msg;
wxString FullFileName, Mask( wxT( "*" ) ), Ext;
wxString msg;
/* Init extension */
switch( format )
......@@ -863,7 +710,7 @@ void WinEDA_DrillFrame::GenDrillMap( std::vector<DRILL_TOOL>& buffer, int format
}
/* Init file name */
FullFileName = m_Parent->m_CurrentScreen->m_FileName;
FullFileName = aFileName;
ChangeFileNameExt( FullFileName, Ext );
Mask += Ext;
......@@ -879,630 +726,37 @@ void WinEDA_DrillFrame::GenDrillMap( std::vector<DRILL_TOOL>& buffer, int format
if( FullFileName.IsEmpty() )
return;
setlocale( LC_NUMERIC, "C" ); // Use the standard notation for float numbers
g_PlotOrient = 0;
/* calcul des dimensions et centre du PCB */
m_Parent->m_Pcb->ComputeBoundaryBox();
dX = m_Parent->m_Pcb->m_BoundaryBox.GetWidth();
dY = m_Parent->m_Pcb->m_BoundaryBox.GetHeight();
BoardCentre = m_Parent->m_Pcb->m_BoundaryBox.Centre();
// Calcul de l'echelle du dessin du PCB,
// Echelle 1 en HPGL, dessin sur feuille A4 en PS, + texte description des symboles
switch( format )
{
case PLOT_FORMAT_HPGL: /* Calcul des echelles de conversion format HPGL */
Scale_X = Scale_Y = 1.0;
scale_x = Scale_X * SCALE_HPGL;
scale_y = Scale_Y * SCALE_HPGL;
fTextScale = SCALE_HPGL;
SheetSize = m_Parent->m_CurrentScreen->m_CurrentSheet->m_Size;
SheetSize.x *= U_PCB;
SheetSize.y *= U_PCB;
g_PlotOffset.x = 0;
g_PlotOffset.y = (int) (SheetSize.y * scale_y);
break;
case PLOT_FORMAT_POST:
{
// calcul en unites internes des dimensions de la feuille ( connues en 1/1000 pouce )
SheetPS = &g_Sheet_A4;
SheetSize.x = SheetPS->m_Size.x * U_PCB;
SheetSize.y = SheetPS->m_Size.y * U_PCB;
float Xscale = (float) ( SheetSize.x - (marge * 2) ) / dX;
float Yscale = (float) ( SheetSize.y * 0.6 - (marge * 2) ) / dY;
scale_x = scale_y = MIN( Xscale, Yscale );
g_PlotOffset.x = -(SheetSize.x / 2) +
(int) (BoardCentre.x * scale_x) + marge;
g_PlotOffset.y = SheetSize.y / 2 +
(int) (BoardCentre.y * scale_y) - marge;
g_PlotOffset.y += SheetSize.y / 8; /* decalage pour legende */
break;
}
}
dest = wxFopen( FullFileName, wxT( "wt" ) );
if( dest == 0 )
{
msg.Printf( _( "Unable to create file <%s>" ), FullFileName.GetData() );
msg = _( "Unable to create file" );
msg << wxT( " <" ) << FullFileName << wxT( ">" );
DisplayError( this, msg ); return;
}
/* Init : */
m_Parent->MsgPanel->EraseMsgBox();
Affiche_1_Parametre( m_Parent, 0, _( "File" ), FullFileName, BLUE );
/* Calcul de la liste des diametres de percage (liste des drill_tools) */
ii = Gen_Liste_Tools( s_ToolListBuffer, FALSE );
msg.Printf( wxT( "%d" ), ii );
Affiche_1_Parametre( m_Parent, 48, _( "Tools" ), msg, BROWN );
switch( format )
{
case PLOT_FORMAT_HPGL:
InitPlotParametresHPGL( g_PlotOffset, scale_x, scale_y );
PrintHeaderHPGL( dest, g_HPGL_Pen_Speed, g_HPGL_Pen_Num );
break;
case PLOT_FORMAT_POST:
{
int BBox[4];
BBox[0] = BBox[1] = PlotMarge_in_mils;
BBox[2] = SheetPS->m_Size.x - PlotMarge_in_mils;
BBox[3] = SheetPS->m_Size.y - PlotMarge_in_mils;
InitPlotParametresPS( g_PlotOffset, SheetPS,
(double) 1.0 / PCB_INTERNAL_UNIT, (double) 1.0 / PCB_INTERNAL_UNIT );
SetDefaultLineWidthPS( 10 ); // Set line with to 10/1000 inch
PrintHeaderPS( dest, wxT( "PCBNEW-PS" ), FullFileName, 1, BBox, wxLANDSCAPE );
InitPlotParametresPS( g_PlotOffset, SheetPS, scale_x, scale_y );
}
break;
default:
break;
}
/* Draw items on edge layer */
PtStruct = m_Parent->m_Pcb->m_Drawings;
for( ; PtStruct != NULL; PtStruct = PtStruct->Pnext )
{
switch( PtStruct->Type() )
{
case TYPEDRAWSEGMENT:
PlotDrawSegment( (DRAWSEGMENT*) PtStruct, format, EDGE_LAYER );
break;
case TYPETEXTE:
PlotTextePcb( (TEXTE_PCB*) PtStruct, format, EDGE_LAYER );
break;
case TYPECOTATION:
PlotCotation( (COTATION*) PtStruct, format, EDGE_LAYER );
break;
case TYPEMIRE:
PlotMirePcb( (MIREPCB*) PtStruct, format, EDGE_LAYER );
break;
case TYPEMARKER: // do not draw
break;
default:
DisplayError( this, wxT( "WinEDA_DrillFrame::GenDrillMap() : Unexpected Draw Type" ) );
break;
}
}
TextWidth = 50; // Set Drill Symbols width in 1/10000 mils
if( format == PLOT_FORMAT_POST )
{
sprintf( line, "%d setlinewidth\n", TextWidth );
fputs( line, dest );
}
ii = Plot_Drill_PcbMap( s_ToolListBuffer, format );
msg.Printf( wxT( "%d" ), ii );
Affiche_1_Parametre( m_Parent, 64, _( "Drill" ), msg, GREEN );
/* Impression de la liste des symboles utilises */
CharSize = 800; /* text size in 1/10000 mils */
float CharScale = 1.0 / scale_x; /* real scale will be CharScale * scale_x,
* because the global plot scale is scale_x */
TextWidth = (int) (50 * CharScale); // Set text width
intervalle = (int) (CharSize * CharScale) + TextWidth;
switch( format )
{
case PLOT_FORMAT_HPGL:
{
/* generation des dim: commande SI x,y; x et y = dim en cm */
char csize[256];
sprintf( csize, "%2.3f", (float) CharSize * CharScale * 0.000254 );
sprintf( line, "SI %s, %s;\n", csize, csize );
break;
}
case PLOT_FORMAT_POST:
/* Reglage de l'epaisseur de traits des textes */
sprintf( line, "%d setlinewidth\n", TextWidth );
break;
default:
*line = 0;
break;
}
fputs( line, dest );
switch( format )
{
default:
case PLOT_FORMAT_POST:
g_PlotOffset.x = 0;
g_PlotOffset.y = 0;
InitPlotParametresPS( g_PlotOffset, SheetPS, scale_x, scale_x );
break;
case PLOT_FORMAT_HPGL:
InitPlotParametresHPGL( g_PlotOffset, scale_x, scale_x );
break;
}
/* Trace des informations */
/* Trace de "Infos" */
plotX = marge + 1000;
plotY = CharSize + 1000;
x = plotX; y = plotY;
x = +g_PlotOffset.x + (int) (x * fTextScale);
y = g_PlotOffset.y - (int) (y * fTextScale);
plotY += (int) ( intervalle * 1.2) + 200;
switch( format )
{
case PLOT_FORMAT_HPGL:
sprintf( line, "PU %d, %d; LBInfos\03;\n",
x + (int) (intervalle * CharScale * fTextScale),
y - (int) (CharSize / 2 * CharScale * fTextScale) );
fputs( line, dest );
break;
case PLOT_FORMAT_POST:
wxString Text = wxT( "Infos" );
Plot_1_texte( format, Text, 0, TextWidth,
x, y,
(int) (CharSize * CharScale), (int) (CharSize * CharScale),
FALSE );
break;
}
for( ii = 0; ii < buffer.size(); ii++ )
{
int plot_diam;
if( buffer[ii].m_TotalCount == 0 )
continue;
plot_diam = (int) (buffer[ii].m_Diameter);
x = plotX; y = plotY;
x = -g_PlotOffset.x + (int) (x * fTextScale);
y = g_PlotOffset.y - (int) (y * fTextScale);
PlotDrillSymbol( wxPoint( x, y ), plot_diam, ii, format );
intervalle = (int) (CharSize * CharScale) + TextWidth;
intervalle = (int) ( intervalle * 1.2);
if( intervalle < (plot_diam + 200 + TextWidth) )
intervalle = plot_diam + 200 + TextWidth;
int rayon = plot_diam / 2;
x = plotX + rayon + (int) (CharSize * CharScale); y = plotY;
x = -g_PlotOffset.x + (int) (x * fTextScale);
y = g_PlotOffset.y - (int) (y * fTextScale);
/* Trace de la legende associee */
switch( format )
{
case PLOT_FORMAT_HPGL:
// List the diameter of each drill in the selected Drill Unit,
// and then its diameter in the other Drill Unit.
if( s_Unit_Drill_is_Inch )
sprintf( line, "PU %d, %d; LB%2.3f\" / %2.2fmm ",
x + (int) (intervalle * CharScale * fTextScale),
y - (int) (CharSize / 2 * CharScale * fTextScale),
float (buffer[ii].m_Diameter) * 0.0001,
float (buffer[ii].m_Diameter) * 0.00254 );
else
sprintf( line, "PU %d, %d; LB%2.2fmm / %2.3f\" ",
x + (int) (intervalle * CharScale * fTextScale),
y - (int) (CharSize / 2 * CharScale * fTextScale),
float (buffer[ii].m_Diameter) * 0.00254,
float (buffer[ii].m_Diameter) * 0.0001 );
fputs( line, dest );
// Now list how many holes and ovals are associated with each drill.
if( ( buffer[ii].m_TotalCount == 1 ) && ( buffer[ii].m_OvalCount == 0 ) )
sprintf( line, "(1 hole)\n" );
else if( buffer[ii].m_TotalCount == 1 ) // && ( buffer[ii]m_OvalCount == 1 )
sprintf( line, "(1 hole) (with 1 oblong)\n" );
else if( buffer[ii].m_OvalCount == 0 )
sprintf( line, "(%d holes)\n",
buffer[ii].m_TotalCount );
else if( buffer[ii].m_OvalCount == 1 )
sprintf( line, "(%d holes) (with 1 oblong)\n",
buffer[ii].m_TotalCount );
else // if ( buffer[ii]m_OvalCount > 1 )
sprintf( line, "(%d holes) (with %d oblongs)\n",
buffer[ii].m_TotalCount,
buffer[ii].m_OvalCount );
fputs( line, dest );
fputs( "\03;\n", dest );
break;
case PLOT_FORMAT_POST:
// List the diameter of each drill in the selected Drill Unit,
// and then its diameter in the other Drill Unit.
if( s_Unit_Drill_is_Inch )
sprintf( line, "%2.3f\" / %2.2fmm ",
float (buffer[ii].m_Diameter) * 0.0001,
float (buffer[ii].m_Diameter) * 0.00254 );
else
sprintf( line, "%2.2fmm / %2.3f\" ",
float (buffer[ii].m_Diameter) * 0.00254,
float (buffer[ii].m_Diameter) * 0.0001 );
msg = CONV_FROM_UTF8( line );
// Now list how many holes and ovals are associated with each drill.
if( ( buffer[ii].m_TotalCount == 1 ) && ( buffer[ii].m_OvalCount == 0 ) )
sprintf( line, "(1 hole)" );
else if( buffer[ii].m_TotalCount == 1 ) // && ( buffer[ii]m_OvalCount == 1 )
sprintf( line, "(1 hole) (with 1 oblong)" );
else if( buffer[ii].m_OvalCount == 0 )
sprintf( line, "(%d holes)",
buffer[ii].m_TotalCount );
else if( buffer[ii].m_OvalCount == 1 )
sprintf( line, "(%d holes) (with 1 oblong)",
buffer[ii].m_TotalCount );
else // if ( buffer[ii]m_OvalCount > 1 )
sprintf( line, "(%d holes) (with %d oblongs)",
buffer[ii].m_TotalCount,
buffer[ii].m_OvalCount );
msg += CONV_FROM_UTF8( line );
Plot_1_texte( format, msg, 0, TextWidth,
x, y,
(int) (CharSize * CharScale),
(int) (CharSize * CharScale),
FALSE );
break;
}
plotY += intervalle;
}
switch( format )
{
case PLOT_FORMAT_HPGL:
CloseFileHPGL( dest );
break;
case PLOT_FORMAT_POST:
CloseFilePS( dest );
break;
}
setlocale( LC_NUMERIC, "" ); // Revert to local notation for float numbers
g_PlotOrient = old_g_PlotOrient;
GenDrillMapFile( m_Parent->m_Pcb,
dest,
FullFileName,
m_Parent->m_CurrentScreen->m_CurrentSheet->m_Size,
s_HoleListBuffer,
s_ToolListBuffer,
s_Unit_Drill_is_Inch,
format );
}
/****************************************************************************************/
int WinEDA_DrillFrame::Plot_Drill_PcbMap( std::vector<DRILL_TOOL>& buffer, int format )
/****************************************************************************************/
/** Creates the drill map file in HPGL or POSTSCRIPT format
* @return drill count
* @param buffer = drill list buffer
* @param format = ouput format (hpgl / ps)
*/
{
TRACK* pt_piste;
D_PAD* pt_pad;
MODULE* Module;
unsigned shape_id;
int diam, holes_count;
wxPoint pos;
wxSize size;
holes_count = 0;
/* create the drill list */
if( buffer.size() > 13 )
{
DisplayInfo( this,
_(
" Drill map: Too many diameter values to draw to draw one symbol per drill value (max 13)\nPlot uses circle shape for some drill values" ),
10 );
}
// Plot the drill map:
for( shape_id = 0; shape_id < buffer.size(); shape_id++ )
{
/* create the via drill map */
{
pt_piste = m_Parent->m_Pcb->m_Track;
for( ; pt_piste != NULL; pt_piste = (TRACK*) pt_piste->Pnext )
{
if( pt_piste->Type() != TYPEVIA )
continue;
int via_drill = pt_piste->GetDrillValue();
if( via_drill != buffer[shape_id].m_Diameter )
continue;
pos = pt_piste->m_Start;
PlotDrillSymbol( pos, via_drill, shape_id, format );
holes_count++;
}
}
/* create the pad drill map: */
for( Module = m_Parent->m_Pcb->m_Modules; Module != NULL; Module = Module->Next() )
{
pt_pad = (D_PAD*) Module->m_Pads;
for( ; pt_pad != NULL; pt_pad = pt_pad->Next() )
{
switch( pt_pad->m_DrillShape )
{
case PAD_CIRCLE:
diam = pt_pad->m_Drill.x;
if( diam != buffer[shape_id].m_Diameter )
continue;
PlotDrillSymbol( pt_pad->m_Pos, diam, shape_id, format );
break;
case PAD_OVAL:
if( pt_pad->m_DrillShape != PAD_OVAL )
continue;
diam = MIN( pt_pad->m_Drill.x, pt_pad->m_Drill.y );
if( diam != buffer[shape_id].m_Diameter )
continue;
PlotOvalDrillSymbol( pt_pad->m_Pos, pt_pad->m_Drill, pt_pad->m_Orient, format );
break;
}
holes_count++;
}
/* Fin examen 1 module */
}
/* Fin 1 passe de drill_tool */
}
/* fin analyse des trous de modules */
return holes_count;
}
/************************************************************************************/
void PlotDrillSymbol( const wxPoint& position, int diametre, int num_forme, int format )
/************************************************************************************/
/* Trace un motif de numero de forme num_forme, aux coord x0, y0.
* x0, y0 = coordonnees tables
* diametre = diametre (coord table) du trou
* num_forme = index ( permet de generer des formes caract )
*/
{
int rayon = diametre / 2;
void (*FctPlume)( wxPoint pos, int state );
int x0, y0;
x0 = position.x; y0 = position.y;
FctPlume = Move_Plume_HPGL;
if( format == PLOT_FORMAT_POST )
FctPlume = LineTo_PS;
switch( num_forme )
{
case 0: /* vias : forme en X */
FctPlume( wxPoint( x0 - rayon, y0 - rayon ), 'U' );
FctPlume( wxPoint( x0 + rayon, y0 + rayon ), 'D' );
FctPlume( wxPoint( x0 + rayon, y0 - rayon ), 'U' );
FctPlume( wxPoint( x0 - rayon, y0 + rayon ), 'D' );
break;
case 1: /* Cercle */
if( format == PLOT_FORMAT_HPGL )
trace_1_pastille_RONDE_HPGL( wxPoint( x0, y0 ), diametre, FILAIRE );
if( format == PLOT_FORMAT_POST )
trace_1_pastille_RONDE_POST( wxPoint( x0, y0 ), diametre, FILAIRE );
break;
case 2: /* forme en + */
FctPlume( wxPoint( x0, y0 - rayon ), 'U' );
FctPlume( wxPoint( x0, y0 + rayon ), 'D' );
FctPlume( wxPoint( x0 + rayon, y0 ), 'U' );
FctPlume( wxPoint( x0 - rayon, y0 ), 'D' );
break;
case 3: /* forme en X cercle */
FctPlume( wxPoint( x0 - rayon, y0 - rayon ), 'U' );
FctPlume( wxPoint( x0 + rayon, y0 + rayon ), 'D' );
FctPlume( wxPoint( x0 + rayon, y0 - rayon ), 'U' );
FctPlume( wxPoint( x0 - rayon, y0 + rayon ), 'D' );
if( format == PLOT_FORMAT_HPGL )
trace_1_pastille_RONDE_HPGL( wxPoint( x0, y0 ), diametre, FILAIRE );
if( format == PLOT_FORMAT_POST )
trace_1_pastille_RONDE_POST( wxPoint( x0, y0 ), diametre, FILAIRE );
break;
case 4: /* forme en cercle barre de - */
FctPlume( wxPoint( x0 - rayon, y0 ), 'U' );
FctPlume( wxPoint( x0 + rayon, y0 ), 'D' );
if( format == PLOT_FORMAT_HPGL )
trace_1_pastille_RONDE_HPGL( wxPoint( x0, y0 ), diametre, FILAIRE );
if( format == PLOT_FORMAT_POST )
trace_1_pastille_RONDE_POST( wxPoint( x0, y0 ), diametre, FILAIRE );
break;
case 5: /* forme en cercle barre de | */
FctPlume( wxPoint( x0, y0 - rayon ), 'U' );
FctPlume( wxPoint( x0, y0 + rayon ), 'D' );
if( format == PLOT_FORMAT_HPGL )
trace_1_pastille_RONDE_HPGL( wxPoint( x0, y0 ), diametre, FILAIRE );
if( format == PLOT_FORMAT_POST )
trace_1_pastille_RONDE_POST( wxPoint( x0, y0 ), diametre, FILAIRE );
break;
case 6: /* forme en carre */
if( format == PLOT_FORMAT_HPGL )
trace_1_pad_TRAPEZE_HPGL( wxPoint( x0, y0 ), wxSize( rayon, rayon ), wxSize( 0,
0 ), 0,
FILAIRE );
if( format == PLOT_FORMAT_POST )
trace_1_pad_TRAPEZE_POST( wxPoint( x0, y0 ), wxSize( rayon, rayon ), wxSize( 0,
0 ), 0,
FILAIRE );
break;
case 7: /* forme en losange */
if( format == PLOT_FORMAT_HPGL )
trace_1_pad_TRAPEZE_HPGL( wxPoint( x0, y0 ), wxSize( rayon, rayon ), wxSize( 0,
0 ), 450,
FILAIRE );
if( format == PLOT_FORMAT_POST )
trace_1_pad_TRAPEZE_POST( wxPoint( x0, y0 ), wxSize( rayon, rayon ), wxSize( 0,
0 ), 450,
FILAIRE );
break;
case 8: /* forme en carre barre par un X*/
FctPlume( wxPoint( x0 - rayon, y0 - rayon ), 'U' );
FctPlume( wxPoint( x0 + rayon, y0 + rayon ), 'D' );
FctPlume( wxPoint( x0 + rayon, y0 - rayon ), 'U' );
FctPlume( wxPoint( x0 - rayon, y0 + rayon ), 'D' );
if( format == PLOT_FORMAT_HPGL )
trace_1_pad_TRAPEZE_HPGL( wxPoint( x0, y0 ), wxSize( rayon, rayon ), wxSize( 0,
0 ), 0,
FILAIRE );
if( format == PLOT_FORMAT_POST )
trace_1_pad_TRAPEZE_POST( wxPoint( x0, y0 ), wxSize( rayon, rayon ), wxSize( 0,
0 ), 0,
FILAIRE );
break;
case 9: /* forme en losange barre par un +*/
FctPlume( wxPoint( x0, y0 - rayon ), 'U' );
FctPlume( wxPoint( x0, y0 + rayon ), 'D' );
FctPlume( wxPoint( x0 + rayon, y0 ), 'U' );
FctPlume( wxPoint( x0 - rayon, y0 ), 'D' );
if( format == PLOT_FORMAT_HPGL )
trace_1_pad_TRAPEZE_HPGL( wxPoint( x0, y0 ), wxSize( rayon, rayon ), wxSize( 0,
0 ), 450,
FILAIRE );
if( format == PLOT_FORMAT_POST )
trace_1_pad_TRAPEZE_POST( wxPoint( x0, y0 ), wxSize( rayon, rayon ), wxSize( 0,
0 ), 450,
FILAIRE );
break;
case 10: /* forme en carre barre par un '/' */
FctPlume( wxPoint( x0 - rayon, y0 - rayon ), 'U' );
FctPlume( wxPoint( x0 + rayon, y0 + rayon ), 'D' );
if( format == PLOT_FORMAT_HPGL )
trace_1_pad_TRAPEZE_HPGL( wxPoint( x0, y0 ), wxSize( rayon, rayon ), wxSize( 0,
0 ), 0,
FILAIRE );
if( format == PLOT_FORMAT_POST )
trace_1_pad_TRAPEZE_POST( wxPoint( x0, y0 ), wxSize( rayon, rayon ), wxSize( 0,
0 ), 0,
FILAIRE );
break;
case 11: /* forme en losange barre par un |*/
FctPlume( wxPoint( x0, y0 - rayon ), 'U' );
FctPlume( wxPoint( x0, y0 + rayon ), 'D' );
if( format == PLOT_FORMAT_HPGL )
trace_1_pad_TRAPEZE_HPGL( wxPoint( x0, y0 ), wxSize( rayon, rayon ), wxSize( 0,
0 ), 450,
FILAIRE );
if( format == PLOT_FORMAT_POST )
trace_1_pad_TRAPEZE_POST( wxPoint( x0, y0 ), wxSize( rayon, rayon ), wxSize( 0,
0 ), 450,
FILAIRE );
break;
case 12: /* forme en losange barre par un -*/
FctPlume( wxPoint( x0 - rayon, y0 ), 'U' );
FctPlume( wxPoint( x0 + rayon, y0 ), 'D' );
if( format == PLOT_FORMAT_HPGL )
trace_1_pad_TRAPEZE_HPGL( wxPoint( x0, y0 ), wxSize( rayon, rayon ), wxSize( 0,
0 ), 450,
FILAIRE );
if( format == PLOT_FORMAT_POST )
trace_1_pad_TRAPEZE_POST( wxPoint( x0, y0 ), wxSize( rayon, rayon ), wxSize( 0,
0 ), 450,
FILAIRE );
break;
default:
if( format == PLOT_FORMAT_HPGL )
trace_1_pastille_RONDE_HPGL( wxPoint( x0, y0 ), diametre, FILAIRE );
if( format == PLOT_FORMAT_POST )
trace_1_pastille_RONDE_POST( wxPoint( x0, y0 ), diametre, FILAIRE );
break;
}
if( format == PLOT_FORMAT_HPGL )
Plume_HPGL( 'U' );
}
/*********************************************************************************************/
void PlotOvalDrillSymbol( const wxPoint& position, const wxSize& size, int orient, int format )
/*********************************************************************************************/
/* Draws an oblong hole.
* because functions to draw oblong shapes exist to draw oblong pads, Use they.
*/
{
switch( format )
{
case PLOT_FORMAT_HPGL:
trace_1_pastille_OVALE_HPGL( position, size, orient, FILAIRE );
break;
case PLOT_FORMAT_POST:
trace_1_pastille_OVALE_POST( position, size, orient, FILAIRE );
break;
}
}
/***************************************************************************/
void WinEDA_DrillFrame::GenDrillReport( std::vector<DRILL_TOOL>& buffer )
/***************************************************************************/
/**************************************************************************************************/
void WinEDA_DrillFrame::GenDrillReport( const wxString aFileName, std::vector<DRILL_TOOL>& buffer )
/**************************************************************************************************/
/*
* Create a list of drill values and drill count
*/
{
wxString FileName, Mask( wxT( "*" ) ), Ext( wxT( ".rpt" ) );
unsigned ii, TotalHoleCount;
char line[1024];
wxString msg;
FileName = m_Parent->m_CurrentScreen->m_FileName;
FileName = aFileName;
ChangeFileNameExt( FileName, wxT( "-drl" ) + Ext );
Mask += Ext;
......@@ -1526,67 +780,5 @@ void WinEDA_DrillFrame::GenDrillReport( std::vector<DRILL_TOOL>& buffer )
return;
}
m_Parent->MsgPanel->EraseMsgBox();
Affiche_1_Parametre( m_Parent, 0, _( "File" ), FileName, BLUE );
/* Determine the list of the different drill diameters. */
ii = Gen_Liste_Tools( buffer, FALSE );
msg.Printf( wxT( "%d" ), ii );
Affiche_1_Parametre( m_Parent, 30, _( "Tools" ), msg, BROWN );
fprintf( dest, "Drill report for %s\n", CONV_TO_UTF8( m_Parent->m_CurrentScreen->m_FileName ) );
fprintf( dest, "Created on %s\n", DateAndTime( line ) );
// List which Drill Unit option had been selected for the associated drill file.
if( s_Unit_Drill_is_Inch )
fputs( "Selected Drill Unit: Imperial (\")\n\n", dest );
else
fputs( "Selected Drill Unit: Metric (mm)\n\n", dest );
TotalHoleCount = 0;
for( ii = 0; ii < buffer.size(); ii++ )
{
// List the tool number assigned to each drill,
// then its diameter in the selected Drill Unit,
// and then its diameter in the other Drill Unit.
if( s_Unit_Drill_is_Inch )
sprintf( line, "T%d %2.3f\" %2.2fmm ",
ii + 1,
float (buffer[ii].m_Diameter) * 0.0001,
float (buffer[ii].m_Diameter) * 0.00254 );
else
sprintf( line, "T%d %2.2fmm %2.3f\" ",
ii + 1,
float (buffer[ii].m_Diameter) * 0.00254,
float (buffer[ii].m_Diameter) * 0.0001 );
fputs( line, dest );
// Now list how many holes and ovals are associated with each drill.
if( ( buffer[ii].m_TotalCount == 1 ) && ( buffer[ii].m_OvalCount == 0 ) )
sprintf( line, "(1 hole)\n" );
else if( buffer[ii].m_TotalCount == 1 )
sprintf( line, "(1 hole) (with 1 oblong)\n" );
else if( buffer[ii].m_OvalCount == 0 )
sprintf( line, "(%d holes)\n",
buffer[ii].m_TotalCount );
else if( buffer[ii].m_OvalCount == 1 )
sprintf( line, "(%d holes) (with 1 oblong)\n",
buffer[ii].m_TotalCount );
else // if ( buffer[ii]m_OvalCount > 1 )
sprintf( line, "(%d holes) (with %d oblongs)\n",
buffer[ii].m_TotalCount,
buffer[ii].m_OvalCount );
fputs( line, dest );
TotalHoleCount += buffer[ii].m_TotalCount;
}
sprintf( line, "\ntotal holes count %d\n", TotalHoleCount );
fputs( line, dest );
fclose( dest );
GenDrillReportFile( dest, m_Parent->m_CurrentScreen->m_FileName, buffer, s_Unit_Drill_is_Inch );
}
pcbnew/gendrill.h 0 → 100644
View file @ 7d676fbf
/*******************************************************************************/
/* classes and functions declaration unsed in drill file and report generation */
/*******************************************************************************/
#ifndef GENDRILL_H
#define GENDRILL_H
/* the DRILL_TOOL class handle tools used in the excellon drill file */
class DRILL_TOOL
{
public:
int m_Diameter; // the diameter of the used tool (for oblong, the smaller size)
int m_TotalCount; // how many times it is used (round and oblong)
int m_OvalCount; // oblong count
public:
DRILL_TOOL( int diametre )
{
m_TotalCount = 0;
m_OvalCount = 0;
m_Diameter = diametre;
}
};
/* the HOLE_INFO class handle hole which must be drilled (diameter, position and layers) */
class HOLE_INFO
{
public:
int m_Hole_Diameter; // hole value, and for oblong min(hole size x, hole size y)
int m_Tool_Reference; // Tool reference for this hole = 1 ... n (values <=0 must not be used)
int m_Hole_SizeX; // hole size x for oblong holes
int m_Hole_SizeY; // hole size y for oblong holes
int m_Hole_Orient; // Hole rotation (= pad rotation) for oblong holes
int m_Hole_Shape; // hole shape: round (0) or oval (1)
int m_Hole_Pos_X; // hole position X
int m_Hole_Pos_Y; // hole position Y
int m_Hole_Bottom_Layer; // hole starting layer (usually copper)
int m_Hole_Top_Layer; // hole ending layer (usually component): m_Hole_First_Layer < m_Hole_Last_Layer
};
/* the DrillPrecision class to handle drill precision format in excellon files*/
class DrillPrecision
{
public:
int m_lhs;
int m_rhs;
public:
DrillPrecision( int l, int r ) { m_lhs = l; m_rhs = r; }
};
/* zeros format */
enum zeros_fmt {
DECIMAL_FORMAT,
SUPPRESS_LEADING,
SUPPRESS_TRAILING,
KEEP_ZEROS
};
/**
* Function BuildHolesList
* Create the list of holes and tools for a given board
* @param Pcb : the given board
* @param aHoleListBuffer : the std::vector<HOLE_INFO> to fill with pcb info
* @param aToolListBuffer : the std::vector<DRILL_TOOL> to fill with tools to use
*/
void Build_Holes_List( BOARD* Pcb, std::vector<HOLE_INFO>& aHoleListBuffer,
std::vector<DRILL_TOOL>& aToolListBuffer,
int aFirstLayer, int aLastLayer );
void GenDrillMapFile( BOARD* aPcb,
FILE* aFile,
const wxString& aFullFileName,
wxSize aSheetSize,
std::vector<HOLE_INFO> aHoleListBuffer,
std::vector<DRILL_TOOL> aToolListBuffer,
bool aUnit_Drill_is_Inch,
int format );
void Gen_Drill_PcbMap( BOARD* aPcb, FILE* aFile,
std::vector<HOLE_INFO>& aHoleListBuffer,
std::vector<DRILL_TOOL>& aToolListBuffer,
int format );
/*
* Create a list of drill values and drill count
*/
void GenDrillReportFile( FILE* aFile, const wxString& aBoardFilename,
std::vector<DRILL_TOOL>& aToolListBuffer, bool aUnit_Drill_is_Inch );
#endif // #ifndef GENDRILL_H
pcbnew/makefile.include
View file @ 7d676fbf
......@@ -88,6 +88,8 @@ OBJECTS= $(TARGET).o classpcb.o\
librairi.o edgemod.o\
connect.o muonde.o attribut.o\
gendrill.o\
gen_holes_and_tools_lists_for_drill.o\
gen_drill_report_files.o\
sel_layer.o \
cotation.o\
automove.o\
......
pcbnew/onrightclick.cpp
View file @ 7d676fbf
......@@ -657,14 +657,14 @@ void WinEDA_PcbFrame::createPopUpMenuForZones( ZONE_CONTAINER* edge_zone, wxMenu
ADD_MENUITEM_WITH_SUBMENU( aPopMenu, zones_menu,
-1, _( "Zones" ), add_zone_xpm );
int index;
if( ( index = edge_zone->HitTestForCorner( GetScreen()->m_Curseur ) ) >= 0 )
if( ( index = edge_zone->HitTestForCorner( GetScreen()->RefPos( true ) ) ) >= 0 )
{
ADD_MENUITEM( zones_menu, ID_POPUP_PCB_MOVE_ZONE_CORNER,
_( "Move Corner" ), move_xpm );
ADD_MENUITEM( zones_menu, ID_POPUP_PCB_DELETE_ZONE_CORNER,
_( "Delete Corner" ), delete_xpm );
}
else if( ( index = edge_zone->HitTestForEdge( GetScreen()->m_Curseur ) ) >= 0 )
else if( ( index = edge_zone->HitTestForEdge( GetScreen()->RefPos( true ) ) ) >= 0 )
{
ADD_MENUITEM( zones_menu, ID_POPUP_PCB_ADD_ZONE_CORNER,
_( "Create Corner" ), Add_Corner_xpm );
......
pcbnew/tool_pcb.cpp
View file @ 7d676fbf
......@@ -611,6 +611,7 @@ WinEDAChoiceBox* WinEDA_PcbFrame::ReCreateLayerBox( WinEDA_Toolbar* parent )
/**************************************************************************/
{
int ii, jj, ll;
unsigned lenght = 0;
bool rebuild = FALSE;
long current_mask_layer;
......@@ -679,10 +680,12 @@ WinEDAChoiceBox* WinEDA_PcbFrame::ReCreateLayerBox( WinEDA_Toolbar* parent )
msg = AddHotkeyName( msg, s_Board_Editor_Hokeys_Descr, HK_SwitchLayer[ii] );
m_SelLayerBox->Append( msg );
m_SelLayerBox->SetClientData( jj, (void*) ii );
lenght = max(lenght, msg.Len() );
jj++;
}
}
int lchar = m_SelLayerBox->GetFont().GetPointSize();
m_SelLayerBox->SetSize(wxSize(lenght * lchar,-1));
m_SelLayerBox->SetToolTip( _( "+/- to switch" ) );
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment