Skip to content

K
kicad-source-mirror
Commit 777076c8 authored by charras's avatar charras
Browse files
Options

minor changes. See changelog

parent 6bb111cb
Show whitespace changes
Inline Side-by-side
Showing with 176 additions and 98 deletions
3d-viewer/3d_read_mesh.cpp
View file @ 777076c8
......@@ -53,7 +53,7 @@ int Struct3D_Master:: ReadData()
}
// Switch the locale to standard C (needed to print floating point numbers like 1.3)
setlocale( LC_NUMERIC, "C" );
SetLocaleTo_C_standard( );
while( GetLine( file, line, &LineNum, 512 ) )
{
text = strtok( line, " \t\n\r" );
......@@ -75,7 +75,7 @@ int Struct3D_Master:: ReadData()
}
fclose( file );
setlocale( LC_NUMERIC, "" ); // revert to the current locale
SetLocaleTo_Default( ); // revert to the current locale
return 0;
}
......
change_log.txt
View file @ 777076c8
......@@ -5,6 +5,16 @@ Started 2007-June-11
Please add newer entries at the top, list the date and your name with
email address.
2008-June-06 UPDATE Jean-Pierre Charras <jean-pierre.charras@inpg.fr>
================================================================================
+all:
minor changes
added void SetLocaleTo_C_standard(void) and void SetLocaleTo_Default(void)
This is wrapper to the C setlocale( LC_NUMERIC, "C" )
and setlocale( LC_NUMERIC, "" )function,
but could make more easier an optional use of locale in kicad in floating point notations
2008-May-30 UPDATE Jean-Pierre Charras <jean-pierre.charras@inpg.fr>
================================================================================
+pcbnew
......
common/common.cpp
View file @ 777076c8
......@@ -25,6 +25,39 @@ wxString GetBuildVersion()
}
/********************************/
void SetLocaleTo_C_standard(void)
/********************************/
/** function SetLocaleTo_C_standard
because kicad is internationalized, switch internatization to "C" standard
i.e. uses the . (dot) as separator in print/read float numbers
(some contries (France, Germany ..) use , (comma) as separator)
This function must be called before read or write ascii files using float numbers in data
the SetLocaleTo_C_standard function must be called after reading or writing the file
This is wrapper to the C setlocale( LC_NUMERIC, "C" ) function,
but could make more easier an optional use of locale in kicad
*/
{
setlocale( LC_NUMERIC, "C" ); // Switch the locale to standard C
}
/********************************/
void SetLocaleTo_Default(void)
/********************************/
/** function SetLocaleTo_Default
because kicad is internationalized, switch internatization to default
to use the default separator in print/read float numbers
(. (dot) but some contries (France, Germany ..) use , (comma) as separator)
This function must be called after a call to SetLocaleTo_C_standard
This is wrapper to the C setlocale( LC_NUMERIC, "" ) function,
but could make more easier an optional use of locale in kicad
*/
{
setlocale( LC_NUMERIC, "" ); // revert to the current locale
}
/*********************************************************************************************/
Ki_PageDescr::Ki_PageDescr( const wxSize& size, const wxPoint& offset, const wxString& name )
/*********************************************************************************************/
......@@ -285,8 +318,8 @@ wxString ReturnPcbLayerName( int layer_number, bool omitSpacePadding )
/**************************************************************/
/* Return the name of the layer number "layer_number".
* if "is_filefame" == TRUE, the name can be used for a file name
* (not internatinalized, no space)
* if omitSpacePadding == TRUE, the name can be used for a file name
* (no spaces, replaced by _)
*/
{
const unsigned LAYER_LIMIT = 29;
......@@ -302,7 +335,7 @@ wxString ReturnPcbLayerName( int layer_number, bool omitSpacePadding )
_( "Adhes Cop" ), _( "Adhes Cmp" ), _( "SoldP Cop" ), _( "SoldP Cmp" ),
_( "SilkS Cop" ), _( "SilkS Cmp" ), _( "Mask Cop " ), _( "Mask Cmp " ),
_( "Drawings " ), _( "Comments " ), _( "Eco1 " ), _( "Eco2 " ),
_( "Edges Pcb" ), _( "BAD INDEX" ),
_( "Edges Pcb" ), _( "BAD INDEX" )
};
if( (unsigned) layer_number > LAYER_LIMIT )
......@@ -445,9 +478,9 @@ int GetTimeStamp()
}
/*************************************************/
/**************************************************************/
const wxString& valeur_param( int valeur, wxString& buf_texte )
/*************************************************/
/**************************************************************/
/* Retourne pour affichage la valeur d'un parametre, selon type d'unites choisies
* entree : valeur en mils , buffer de texte
......
common/edaappl.cpp
View file @ 777076c8
......@@ -264,6 +264,8 @@ void WinEDA_App::InitEDA_Appl( const wxString& name )
{
}
SetLocaleTo_Default( ); // Set locale option for separator used in float numbers
#ifdef KICAD_PYTHON
PyHandler::GetInstance()->SetAppName( name );
#endif
......
cvpcb/loadcmp.cpp
View file @ 777076c8
......@@ -81,9 +81,9 @@ MODULE * Module = NULL;
{
Module = new MODULE(m_Pcb);
// Switch the locale to standard C (needed to print floating point numbers like 1.3)
setlocale(LC_NUMERIC, "C");
SetLocaleTo_C_standard( );
Module->ReadDescr(lib_module, &LineNum);
setlocale(LC_NUMERIC, ""); // revert to the current locale
SetLocaleTo_Default( ); // revert to the current locale
Module->SetPosition(wxPoint(0,0) );
fclose(lib_module);
return(Module) ;
......
eeschema/dangling_ends.cpp
View file @ 777076c8
......@@ -319,8 +319,6 @@ DanglingEndHandle* RebuildEndList( EDA_BaseStruct* DrawList )
switch( DrawItem->Type() )
{
case TYPE_SCH_LABEL:
break;
case TYPE_SCH_GLOBALLABEL:
case TYPE_SCH_HIERLABEL:
#undef STRUCT
......
eeschema/plothpgl.cpp
View file @ 777076c8
......@@ -568,10 +568,10 @@ void WinEDA_PlotHPGLFrame::Plot_Schematic_HPGL( int Select_PlotAll, int HPGL_She
else
PlotFileName = MakeFileName( dirbuf, g_DefaultSchematicFileName, wxT( ".plt" ) );
setlocale( LC_NUMERIC, "C" );
SetLocaleTo_C_standard( );
InitPlotParametresHPGL( PlotOffset, g_PlotScaleX, g_PlotScaleY );
Plot_1_Page_HPGL( PlotFileName, screen );
setlocale( LC_NUMERIC, "" );
SetLocaleTo_Default( );
screen = (BASE_SCREEN*) screen->Pnext;
if( Select_PlotAll == FALSE )
break;
......
eeschema/plotps.cpp
View file @ 777076c8
......@@ -481,7 +481,7 @@ void WinEDA_PlotPSFrame::PlotOneSheetPS( const wxString& FileName,
return;
}
setlocale( LC_NUMERIC, "C" );
SetLocaleTo_C_standard( );
Line.Printf( _( "Plot: %s\n" ), FileName.GetData() );
m_MsgBox->AppendText( Line );
......@@ -610,7 +610,7 @@ void WinEDA_PlotPSFrame::PlotOneSheetPS( const wxString& FileName,
/* fin */
CloseFilePS( PlotOutput );
setlocale( LC_NUMERIC, "" );
SetLocaleTo_Default( );
m_MsgBox->AppendText( wxT( "Ok\n" ) );
}
......
gerbview/export_to_pcbnew.cpp
View file @ 777076c8
......@@ -224,7 +224,7 @@ static int SavePcbFormatAscii( WinEDA_GerberFrame* frame, FILE* aFile,
}
// Switch the locale to standard C (needed to print floating point numbers like 1.3)
setlocale( LC_NUMERIC, "C" );
SetLocaleTo_C_standard( );
// write the PCB heading
fprintf( aFile, "PCBNEW-BOARD Version %d date %s\n\n", g_CurrentVersionPCB,
......@@ -238,7 +238,7 @@ static int SavePcbFormatAscii( WinEDA_GerberFrame* frame, FILE* aFile,
// the destructor should destroy all owned sub-objects
delete pcb;
setlocale( LC_NUMERIC, "" ); // revert to the current locale
SetLocaleTo_Default( ); // revert to the current locale
wxEndBusyCursor();
return 1;
}
gerbview/readgerb.cpp
View file @ 777076c8
......@@ -154,7 +154,7 @@ bool WinEDA_GerberFrame::Read_GERBER_File( wxDC* DC,
wxSetWorkingDirectory( path );
wxBusyCursor show_wait;
setlocale( LC_NUMERIC, "C" );
SetLocaleTo_C_standard( );
while( TRUE )
{
......@@ -256,7 +256,7 @@ bool WinEDA_GerberFrame::Read_GERBER_File( wxDC* DC,
}
fclose( gerber_layer->m_Current_File );
setlocale( LC_NUMERIC, "" );
SetLocaleTo_Default( );
/* Init DCodes list and perhaps read a DCODES file,
* if the gerber file is only a RS274D file (without any aperture information)
......
include/common.h
View file @ 777076c8
......@@ -355,6 +355,28 @@ class WinEDA_DrawPanel;
/* COMMON.CPP */
/** function SetLocaleTo_C_standard
because kicad is internationalized, switch internatization to "C" standard
i.e. uses the . (dot) as separator in print/read float numbers
(some contries (France, Germany ..) use , (comma) as separator)
This function must be called before read or write ascii files using float numbers in data
the SetLocaleTo_C_standard function must be called after reading or writing the file
This is wrapper to the C setlocale( LC_NUMERIC, "C" ) function,
but could make more easier an optional use of locale in kicad
*/
void SetLocaleTo_C_standard(void);
/** function SetLocaleTo_Default
because kicad is internationalized, switch internatization to default
to use the default separator in print/read float numbers
(. (dot) but some contries (France, Germany ..) use , (comma) as separator)
This function must be called after a call to SetLocaleTo_C_standard
This is wrapper to the C setlocale( LC_NUMERIC, "" ) function,
but could make more easier an optional use of locale in kicad
*/
void SetLocaleTo_Default(void);
/**
* Operator << overload
......
kicad/mainframe.cpp
View file @ 777076c8
......@@ -248,6 +248,8 @@ void WinEDA_MainFrame::OnCloseWindow( wxCloseEvent& Event )
m_Parent->m_HtmlCtrl = NULL;
}
m_LeftWin->Show(false);
Destroy();
}
......
pcbnew/gen_drill_report_files.cpp
View file @ 777076c8
......@@ -50,7 +50,7 @@ void GenDrillMapFile( BOARD* aPcb, FILE* aFile, const wxString& aFullFileName, w
wxString msg;
setlocale( LC_NUMERIC, "C" ); // Use the standard notation for float numbers
SetLocaleTo_C_standard( ); // Use the standard notation for float numbers
g_PlotOrient = 0;
/* calcul des dimensions et centre du PCB */
aPcb->ComputeBoundaryBox();
......@@ -357,7 +357,7 @@ void GenDrillMapFile( BOARD* aPcb, FILE* aFile, const wxString& aFullFileName, w
break;
}
setlocale( LC_NUMERIC, "" ); // Revert to local notation for float numbers
SetLocaleTo_Default( ); // Revert to local notation for float numbers
g_PlotOrient = old_g_PlotOrient;
}
......
pcbnew/gen_modules_placefile.cpp
View file @ 777076c8
......@@ -144,7 +144,7 @@ void WinEDA_PcbFrame::GenModulesPosition( wxCommandEvent& event )
}
// Switch the locale to standard C (needed to print floating point numbers like 1.3)
setlocale( LC_NUMERIC, "C" );
SetLocaleTo_C_standard( );
/* Affichage du bilan : */
MsgPanel->EraseMsgBox();
......@@ -250,7 +250,7 @@ void WinEDA_PcbFrame::GenModulesPosition( wxCommandEvent& event )
fclose( LayerCu );
}
MyFree( Liste );
setlocale( LC_NUMERIC, "" ); // revert to the current locale
SetLocaleTo_Default( ); // revert to the current locale
msg = wxT( "Cmp File: " ) + NameLayerCmp;
if( GenCu )
......@@ -294,7 +294,7 @@ void WinEDA_PcbFrame::GenModuleReport( wxCommandEvent& event )
}
// Switch the locale to standard C (needed to print floating point numbers like 1.3)
setlocale( LC_NUMERIC, "C" );
SetLocaleTo_C_standard( );
/* Generation entete du fichier 'commentaires) */
sprintf( Line, "## Module report - date %s\n", DateAndTime( Buff ) );
......@@ -421,7 +421,7 @@ void WinEDA_PcbFrame::GenModuleReport( wxCommandEvent& event )
/* Generation fin du fichier */
fputs( "$EndDESCRIPTION\n", rptfile );
fclose( rptfile );
setlocale( LC_NUMERIC, "" ); // revert to the current locale
SetLocaleTo_Default( ); // revert to the current locale
}
......
pcbnew/gendrill.cpp
View file @ 777076c8
......@@ -408,7 +408,7 @@ int WinEDA_DrillFrame::Create_Drill_File_EXCELLON( std::vector<HOLE_INFO>& aHol
float xt, yt;
char line[1024];
setlocale( LC_NUMERIC, "C" ); // Use the standard notation for float numbers
SetLocaleTo_C_standard( ); // Use the standard notation for float numbers
Write_Excellon_Header( dest );
......@@ -539,7 +539,7 @@ int WinEDA_DrillFrame::Create_Drill_File_EXCELLON( std::vector<HOLE_INFO>& aHol
Write_End_Of_File_Drill( dest );
setlocale( LC_NUMERIC, "" ); // Revert to locale float notation
SetLocaleTo_Default( ); // Revert to locale float notation
return holes_count;
}
......
pcbnew/ioascii.cpp
View file @ 777076c8
......@@ -772,7 +772,7 @@ int WinEDA_PcbFrame::ReadPcbFile( FILE* File, bool Append )
wxBusyCursor dummy;
// Switch the locale to standard C (needed to print floating point numbers like 1.3)
setlocale( LC_NUMERIC, "C" );
SetLocaleTo_C_standard( );
NbDraw = NbTrack = NbZone = NbMod = NbNets = -1;
m_Pcb->m_NbNets = 0;
......@@ -1003,7 +1003,7 @@ int WinEDA_PcbFrame::ReadPcbFile( FILE* File, bool Append )
}
}
setlocale( LC_NUMERIC, "" ); // revert to the current locale
SetLocaleTo_Default( ); // revert to the current locale
Affiche_Message( wxEmptyString );
......@@ -1035,7 +1035,7 @@ int WinEDA_PcbFrame::SavePcbFormatAscii( FILE* aFile )
wxBeginBusyCursor();
// Switch the locale to standard C (needed to print floating point numbers like 1.3)
setlocale( LC_NUMERIC, "C" );
SetLocaleTo_C_standard( );
/* Ecriture de l'entete PCB : */
fprintf( aFile, "PCBNEW-BOARD Version %d date %s\n\n", g_CurrentVersionPCB,
......@@ -1047,7 +1047,7 @@ int WinEDA_PcbFrame::SavePcbFormatAscii( FILE* aFile )
rc = m_Pcb->Save( aFile );
setlocale( LC_NUMERIC, "" ); // revert to the current locale
SetLocaleTo_Default( ); // revert to the current locale
wxEndBusyCursor();
if( !rc )
......
pcbnew/loadcmp.cpp
View file @ 777076c8
......@@ -268,9 +268,9 @@ MODULE* WinEDA_BasePcbFrame::Get_Librairie_Module( wxWindow* winaff,
NewModule = new MODULE( m_Pcb );
// Switch the locale to standard C (needed to print floating point numbers like 1.3)
setlocale( LC_NUMERIC, "C" );
SetLocaleTo_C_standard( );
NewModule->ReadDescr( lib_module, &LineNum );
setlocale( LC_NUMERIC, "" ); // revert to the current locale
SetLocaleTo_Default( ); // revert to the current locale
if( Module == NULL ) /* 1er Module */
{
m_Pcb->m_Modules = NewModule;
......
pcbnew/muonde.cpp
View file @ 777076c8
......@@ -449,7 +449,7 @@ void WinEDA_SetParamShapeFrame::ReadDataShapeDescr( wxCommandEvent& event )
bufsize = 100;
ptbuf = PolyEdges = (double*) MyZMalloc( bufsize * 2 * sizeof(double) );
setlocale( LC_NUMERIC, "C" );
SetLocaleTo_C_standard( );
int LineNum = 0;
while( GetLine( File, Line, &LineNum, sizeof(Line) - 1 ) != NULL )
{
......@@ -504,7 +504,7 @@ void WinEDA_SetParamShapeFrame::ReadDataShapeDescr( wxCommandEvent& event )
PolyEdges = NULL;
}
fclose( File );
setlocale( LC_NUMERIC, "" ); // revert to the current locale
SetLocaleTo_Default( ); // revert to the current locale
ShapeScaleX *= unitconv;
ShapeScaleY *= unitconv;
......
pcbnew/pcbcfg.h
View file @ 777076c8
......@@ -36,7 +36,7 @@ static PARAM_CFG_INT PadDrillCfg
wxT( "PadDrlX" ), /* Keyword */
&g_Pad_Master.m_Drill.x, /* Parameter address */
320, /* Default value */
0, 0x7FFF /* Valeurs extremes */
0, 0x7FFF /* Min and max values*/
);
static PARAM_CFG_INT PadDimHCfg //Pad Diameter / H Size
......@@ -44,7 +44,7 @@ static PARAM_CFG_INT PadDimHCfg //Pad Diameter / H Size
wxT( "PadDimH" ), /* Keyword */
&g_Pad_Master.m_Size.x, /* Parameter address */
550, /* Default value */
0, 0x7FFF /* Valeurs extremes */
0, 0x7FFF /* Min and max values*/
);
static PARAM_CFG_INT PadDimVCfg
......@@ -52,7 +52,7 @@ static PARAM_CFG_INT PadDimVCfg
wxT( "PadDimV" ), /* Keyword */
&g_Pad_Master.m_Size.y, /* Parameter address */
550, /* Default value */
0, 0x7FFF /* Valeurs extremes */
0, 0x7FFF /* Min and max values*/
);
......@@ -61,7 +61,7 @@ static PARAM_CFG_INT PadFormeCfg
wxT( "PadForm" ), /* Keyword */
&g_Pad_Master.m_PadShape, /* Parameter address */
PAD_CIRCLE, /* Default value */
0, 0x7F /* Valeurs extremes */
0, 0x7F /* Min and max values*/
);
static PARAM_CFG_INT PadMasqueLayerCfg
......@@ -76,7 +76,7 @@ static PARAM_CFG_INT ViaDiametreCfg
wxT( "ViaDiam" ), /* Keyword */
&g_DesignSettings.m_CurrentViaSize, /* Parameter address */
450, /* Default value */
0, 0xFFFF /* Valeurs extremes */
0, 0xFFFF /* Min and max values*/
);
static PARAM_CFG_INT ViaDrillCfg
......@@ -84,7 +84,7 @@ static PARAM_CFG_INT ViaDrillCfg
wxT( "ViaDril" ), /* Keyword */
&g_DesignSettings.m_ViaDrill, /* Parameter address */
250, /* Default value */
0, 0xFFFF /* Valeurs extremes */
0, 0xFFFF /* Min and max values*/
);
static PARAM_CFG_INT MicroViaDiametreCfg
......@@ -92,7 +92,7 @@ static PARAM_CFG_INT MicroViaDiametreCfg
wxT( "MViaDia" ), /* Keyword */
&g_DesignSettings.m_CurrentMicroViaSize, /* Parameter address */
200, /* Default value */
0, 1000 /* Valeurs extremes */
0, 1000 /* Min and max values*/
);
static PARAM_CFG_INT MicroViaDrillCfg
......@@ -100,7 +100,7 @@ static PARAM_CFG_INT MicroViaDrillCfg
wxT( "MViaDrl" ), /* Keyword */
&g_DesignSettings.m_MicroViaDrill, /* Parameter address */
80, /* Default value */
0, 800 /* Valeurs extremes */
0, 800 /* Min and max values*/
);
static PARAM_CFG_INT ViaShowHoleCfg
......@@ -109,8 +109,8 @@ static PARAM_CFG_INT ViaShowHoleCfg
wxT( "ViaSHole" ), /* Keyword */
&DisplayOpt.m_DisplayViaMode, /* Parameter address */
VIA_SPECIAL_HOLE_SHOW, /* Default value */
VIA_HOLE_NOT_SHOW, /* Valeurs extremes */
OPT_VIA_HOLE_END - 1 /* Valeurs extremes */
VIA_HOLE_NOT_SHOW, /* Min and max values*/
OPT_VIA_HOLE_END - 1 /* Min and max values*/
);
static PARAM_CFG_INT TrackClearenceCfg
......@@ -118,7 +118,7 @@ static PARAM_CFG_INT TrackClearenceCfg
wxT( "Isol" ), /* Keyword */
&g_DesignSettings.m_TrackClearence, /* Parameter address */
120, /* Default value */
0, 0xFFFF /* Valeurs extremes */
0, 0xFFFF /* Min and max values*/
);
static PARAM_CFG_INT LayerCountCfg // Mask Working Layers
......@@ -126,7 +126,7 @@ static PARAM_CFG_INT LayerCountCfg // Mask Working Layers
wxT( "Countlayer" ), /* Keyword */
&g_DesignSettings.m_CopperLayerCount, /* Parameter address */
2, /* Default value */
1, NB_COPPER_LAYERS /* Valeurs extremes */
1, NB_COPPER_LAYERS /* Min and max values*/
);
static PARAM_CFG_INT TrackWidthCfg
......@@ -134,7 +134,7 @@ static PARAM_CFG_INT TrackWidthCfg
wxT( "Lpiste" ), /* Keyword */
&g_DesignSettings.m_CurrentTrackWidth, /* Parameter address */
170, /* Default value */
2, 0xFFFF /* Valeurs extremes */
2, 0xFFFF /* Min and max values*/
);
static PARAM_CFG_INT RouteLayTopCfg // First current working layer
......@@ -142,7 +142,7 @@ static PARAM_CFG_INT RouteLayTopCfg // First current working layer
wxT( "RouteTo" ), /* Keyword */
&Route_Layer_TOP, /* Parameter address */
15, /* Default value */
0, 15 /* Valeurs extremes */
0, 15 /* Min and max values*/
);
static PARAM_CFG_INT RouteLayBotCfg // second current working layer
......@@ -150,7 +150,7 @@ static PARAM_CFG_INT RouteLayBotCfg // second current working layer
wxT( "RouteBo" ), /* Keyword */
&Route_Layer_BOTTOM, /* Parameter address */
0, /* Default value */
0, 15 /* Valeurs extremes */
0, 15 /* Min and max values*/
);
static PARAM_CFG_INT TypeViaCfg
......@@ -158,7 +158,7 @@ static PARAM_CFG_INT TypeViaCfg
wxT( "TypeVia" ), /* Keyword */
&g_DesignSettings.m_CurrentViaType, /* Parameter address */
VIA_THROUGH, /* Default value */
0, 3 /* Valeurs extremes */
0, 3 /* Min and max values*/
);
static PARAM_CFG_BOOL Segm45Cfg // Segm Pistes a 0, 45, 90 degres uniquement
......@@ -177,6 +177,7 @@ static PARAM_CFG_BOOL Raccord45Cfg // Generation automatique des Raccords a 45
static PARAM_CFG_INT UnitCfg // Units: 0 inch, 1 mm
(
INSETUP,
wxT( "Unite" ), /* Keyword */
&g_UnitMetric, /* Parameter address */
FALSE /* Default value */
......@@ -184,6 +185,7 @@ static PARAM_CFG_INT UnitCfg // Units: 0 inch, 1 mm
static PARAM_CFG_BOOL SegmFillCfg
(
INSETUP,
wxT( "SegFill" ), /* Keyword */
&DisplayOpt.DisplayPcbTrackFill, /* Parameter address */
TRUE /* Default value */
......@@ -191,6 +193,7 @@ static PARAM_CFG_BOOL SegmFillCfg
static PARAM_CFG_BOOL NewTrackAfficheGardeCfg
(
INSETUP,
wxT( "NewAffG" ), /* Keyword */
&g_ShowIsolDuringCreateTrack, /* Parameter address */
TRUE /* Default value */
......@@ -198,6 +201,7 @@ static PARAM_CFG_BOOL NewTrackAfficheGardeCfg
static PARAM_CFG_BOOL TrackAfficheGardeCfg
(
INSETUP,
wxT( "SegAffG" ), /* Keyword */
&DisplayOpt.DisplayTrackIsol, /* Parameter address */
FALSE /* Default value */
......@@ -205,6 +209,7 @@ static PARAM_CFG_BOOL TrackAfficheGardeCfg
static PARAM_CFG_BOOL PadFillCfg
(
INSETUP,
wxT( "PadFill" ), /* Keyword */
&DisplayOpt.DisplayPadFill, /* Parameter address */
TRUE /* Default value */
......@@ -212,6 +217,7 @@ static PARAM_CFG_BOOL PadFillCfg
static PARAM_CFG_BOOL PadAfficheGardeCfg
(
INSETUP,
wxT( "PadAffG" ), /* Keyword */
&DisplayOpt.DisplayPadIsol, /* Parameter address */
TRUE /* Default value */
......@@ -219,6 +225,7 @@ static PARAM_CFG_BOOL PadAfficheGardeCfg
static PARAM_CFG_BOOL PadShowNumCfg
(
INSETUP,
wxT( "PadSNum" ), /* Keyword */
&DisplayOpt.DisplayPadNum, /* Parameter address */
TRUE /* Default value */
......@@ -226,26 +233,29 @@ static PARAM_CFG_BOOL PadShowNumCfg
static PARAM_CFG_INT AfficheContourModuleCfg // Module Edges: fill/line/sketch
(
INSETUP,
wxT( "ModAffC" ), /* Keyword */
&DisplayOpt.DisplayModEdge, /* Parameter address */
FILAIRE, /* Default value */
0, 2 /* Valeurs extremes */
FILLED, /* Default value */
0, 2 /* Min and max values*/
);
static PARAM_CFG_INT AfficheTexteModuleCfg // Module Texts: fill/line/sketch
(
INSETUP,
wxT( "ModAffT" ), /* Keyword */
&DisplayOpt.DisplayModText, /* Parameter address */
FILAIRE, /* Default value */
0, 2 /* Valeurs extremes */
FILLED, /* Default value */
0, 2 /* Min and max values*/
);
static PARAM_CFG_INT AfficheTextePcbCfg // PCB Texts: fill/line/sketch
(
INSETUP,
wxT( "PcbAffT" ), /* Keyword */
&DisplayOpt.DisplayDrawItems, /* Parameter address */
FILAIRE, /* Default value */
0, 2 /* Valeurs extremes */
FILLED, /* Default value */
0, 2 /* Min and max values*/
);
static PARAM_CFG_BOOL SegmPcb45Cfg // Force 45 degrees for segments
......@@ -260,7 +270,7 @@ static PARAM_CFG_INT TextePcbDimVCfg
wxT( "TxtPcbV" ), /* Keyword */
&g_DesignSettings.m_PcbTextSize.y, /* Parameter address */
600, /* Default value */
TEXTS_MIN_SIZE, TEXTS_MAX_SIZE /* Valeurs extremes */
TEXTS_MIN_SIZE, TEXTS_MAX_SIZE /* Min and max values*/
);
static PARAM_CFG_INT TextePcbDimHCfg
......@@ -268,7 +278,7 @@ static PARAM_CFG_INT TextePcbDimHCfg
wxT( "TxtPcbH" ), /* Keyword */
&g_DesignSettings.m_PcbTextSize.x, /* Parameter address */
600, /* Default value */
TEXTS_MIN_SIZE, TEXTS_MAX_SIZE /* Valeurs extremes */
TEXTS_MIN_SIZE, TEXTS_MAX_SIZE /* Min and max values*/
);
static PARAM_CFG_SETCOLOR ColorLayer0Cfg // CU Layer Color
......@@ -556,7 +566,7 @@ static PARAM_CFG_INT TexteModDimVCfg
wxT( "TxtModV" ), /* Keyword */
&ModuleTextSize.y, /* Parameter address */
500, /* Default value */
TEXTS_MIN_SIZE, TEXTS_MAX_SIZE /* Valeurs extremes */
TEXTS_MIN_SIZE, TEXTS_MAX_SIZE /* Min and max values*/
);
static PARAM_CFG_INT TexteModDimHCfg
......@@ -564,7 +574,7 @@ static PARAM_CFG_INT TexteModDimHCfg
wxT( "TxtModH" ), /* Keyword */
&ModuleTextSize.x, /* Parameter address */
500, /* Default value */
TEXTS_MIN_SIZE, TEXTS_MAX_SIZE /* Valeurs extremes */
TEXTS_MIN_SIZE, TEXTS_MAX_SIZE /* Min and max values*/
);
static PARAM_CFG_INT TexteModWidthCfg
......@@ -572,7 +582,7 @@ static PARAM_CFG_INT TexteModWidthCfg
wxT( "TxtModW" ), /* Keyword */
&ModuleTextWidth, /* Parameter address */
100, /* Default value */
1, TEXTS_MAX_WIDTH /* Valeurs extremes */
1, TEXTS_MAX_WIDTH /* Min and max values*/
);
static PARAM_CFG_SETCOLOR ColorAncreModCfg
......@@ -644,7 +654,7 @@ static PARAM_CFG_INT HPGLpenNumCfg
wxT( "HPGLnum" ), /* Keyword */
&g_HPGL_Pen_Num, /* Parameter address */
1, /* Default value */
1, 16 /* Valeurs extremes */
1, 16 /* Min and max values*/
);
static PARAM_CFG_INT HPGLdiamCfg // HPGL pen size (mils)
......@@ -652,7 +662,7 @@ static PARAM_CFG_INT HPGLdiamCfg // HPGL pen size (mils)
wxT( "HPGdiam" ), /* Keyword */
&g_HPGL_Pen_Diam, /* Parameter address */
15, /* Default value */
0, 100 /* Valeurs extremes */
0, 100 /* Min and max values*/
);
static PARAM_CFG_INT HPGLspeedCfg //HPGL pen speed (cm/s)
......@@ -660,7 +670,7 @@ static PARAM_CFG_INT HPGLspeedCfg //HPGL pen speed (cm/s)
wxT( "HPGLSpd" ), /* Keyword */
&g_HPGL_Pen_Speed, /* Parameter address */
20, /* Default value */
0, 1000 /* Valeurs extremes */
0, 1000 /* Min and max values*/
);
static PARAM_CFG_INT HPGLrecouvrementCfg
......@@ -668,7 +678,7 @@ static PARAM_CFG_INT HPGLrecouvrementCfg
wxT( "HPGLrec" ), /* Keyword */
&g_HPGL_Pen_Recouvrement, /* Parameter address */
2, /* Default value */
0, 0x100 /* Valeurs extremes */
0, 0x100 /* Min and max values*/
);
static PARAM_CFG_BOOL HPGLcenterCfg //HPGL Org Coord ( 0 normal, 1 Centre)
......@@ -683,7 +693,7 @@ static PARAM_CFG_INT GERBERSpotMiniCfg //Aperture Mini (mils)
wxT( "GERBmin" ), /* Keyword */
&spot_mini, /* Parameter address */
15, /* Default value */
1, 100 /* Valeurs extremes */
1, 100 /* Min and max values*/
);
static PARAM_CFG_INT VernisEpargneGardeCfg
......@@ -691,7 +701,7 @@ static PARAM_CFG_INT VernisEpargneGardeCfg
wxT( "VEgarde" ), /* Keyword */
&g_DesignSettings.m_MaskMargin, /* Parameter address */
100, /* Default value */
0, 0xFFFF /* Valeurs extremes */
0, 0xFFFF /* Min and max values*/
);
static PARAM_CFG_INT DrawSegmLargeurCfg
......@@ -699,7 +709,7 @@ static PARAM_CFG_INT DrawSegmLargeurCfg
wxT( "DrawLar" ), /* Keyword */
&g_DesignSettings.m_DrawSegmentWidth, /* Parameter address */
120, /* Default value */
0, 0xFFFF /* Valeurs extremes */
0, 0xFFFF /* Min and max values*/
);
static PARAM_CFG_INT EdgeSegmLargeurCfg
......@@ -707,7 +717,7 @@ static PARAM_CFG_INT EdgeSegmLargeurCfg
wxT( "EdgeLar" ), /* Keyword */
&g_DesignSettings.m_EdgeSegmentWidth, /* Parameter address */
120, /* Default value */
0, 0xFFFF /* Valeurs extremes */
0, 0xFFFF /* Min and max values*/
);
static PARAM_CFG_INT TexteSegmLargeurCfg
......@@ -715,7 +725,7 @@ static PARAM_CFG_INT TexteSegmLargeurCfg
wxT( "TxtLar" ), /* Keyword */
&g_DesignSettings.m_PcbTextWidth, /* Parameter address */
120, /* Default value */
0, 0xFFFF /* Valeurs extremes */
0, 0xFFFF /* Min and max values*/
);
static PARAM_CFG_INT ModuleSegmWidthCfg
......@@ -723,7 +733,7 @@ static PARAM_CFG_INT ModuleSegmWidthCfg
wxT( "MSegLar" ), /* Keyword */
&ModuleSegmentWidth, /* Parameter address */
120, /* Default value */
0, 0xFFFF /* Valeurs extremes */
0, 0xFFFF /* Min and max values*/
);
static PARAM_CFG_INT FormatPlotCfg
......@@ -731,7 +741,7 @@ static PARAM_CFG_INT FormatPlotCfg
wxT( "ForPlot" ), /* Keyword */
&format_plot, /* Parameter address */
1, /* Default value */
0, 3 /* Valeurs extremes */
0, 3 /* Min and max values*/
);
static PARAM_CFG_INT WTraitSerigraphiePlotCfg
......@@ -739,7 +749,7 @@ static PARAM_CFG_INT WTraitSerigraphiePlotCfg
wxT( "WpenSer" ), /* Keyword */
&g_PlotLine_Width, /* Parameter address */
10, /* Default value */
1, 10000 /* Valeurs extremes */
1, 10000 /* Min and max values*/
);
static PARAM_CFG_DOUBLE UserGrilleXCfg
......@@ -747,7 +757,7 @@ static PARAM_CFG_DOUBLE UserGrilleXCfg
wxT( "UserGrX" ), /* Keyword */
&g_UserGrid.x, /* Parameter address */
0.01, /* Default value */
0.0001, 100.0 /* Valeurs extremes (inches)*/
0.0001, 100.0 /* Min and max values(inches)*/
);
static PARAM_CFG_DOUBLE UserGrilleYCfg
......@@ -755,7 +765,7 @@ static PARAM_CFG_DOUBLE UserGrilleYCfg
wxT( "UserGrY" ), /* Keyword */
&g_UserGrid.y, /* Parameter address */
0.01, /* Default value */
0.0001, 100.0 /* Valeurs extremes (inches)*/
0.0001, 100.0 /* Min and max values (inches)*/
);
static PARAM_CFG_INT UserGrilleUnitCfg
......@@ -763,7 +773,7 @@ static PARAM_CFG_INT UserGrilleUnitCfg
wxT( "UserGrU" ), /* Keyword */
&g_UserGrid_Unit, /* Parameter address */
1, /* Default value */
0, 1 /* Valeurs extremes */
0, 1 /* Min and max values*/
);
static PARAM_CFG_INT DivGrillePcbCfg
......@@ -771,7 +781,7 @@ static PARAM_CFG_INT DivGrillePcbCfg
wxT( "DivGrPc" ), /* Keyword */
&Pcbdiv_grille, /* Parameter address */
1, /* Default value */
1, 10 /* Valeurs extremes */
1, 10 /* Min and max values*/
);
static PARAM_CFG_INT TimeOutCfg //Duree entre Sauvegardes auto en secondes
......@@ -779,7 +789,7 @@ static PARAM_CFG_INT TimeOutCfg //Duree entre Sauvegardes auto en secondes
wxT( "TimeOut" ), /* Keyword */
&g_TimeOut, /* Parameter address */
600, /* Default value */
0, 60000 /* Valeurs extremes */
0, 60000 /* Min and max values*/
);
static PARAM_CFG_BOOL DisplPolairCfg
......@@ -796,15 +806,16 @@ static PARAM_CFG_INT CursorShapeCfg
wxT( "CuShape" ), /* Keyword */
&g_CursorShape, /* Parameter address */
0, /* Default value */
0, 1 /* Valeurs extremes */
0, 1 /* Min and max values*/
);
static PARAM_CFG_INT PrmMaxLinksShowed
(
INSETUP,
wxT( "MaxLnkS" ), /* Keyword */
&g_MaxLinksShowed, /* Parameter address */
3, /* Default value */
0, 15 /* Valeurs extremes */
0, 15 /* Min and max values*/
);
static PARAM_CFG_BOOL ShowRatsnestCfg
......
pcbnew/plotgerb.cpp
View file @ 777076c8
......@@ -74,7 +74,7 @@ void WinEDA_BasePcbFrame::Genere_GERBER( const wxString& FullFileName, int Layer
return;
}
setlocale( LC_NUMERIC, "C" );
SetLocaleTo_C_standard( );
InitPlotParametresGERBER( g_PlotOffset, scale_x, scale_y );
......@@ -135,7 +135,7 @@ void WinEDA_BasePcbFrame::Genere_GERBER( const wxString& FullFileName, int Layer
}
Fin_Trace_GERBER( this, dest );
setlocale( LC_NUMERIC, "" );
SetLocaleTo_Default( );
}
......
pcbnew/plothpgl.cpp
View file @ 777076c8
......@@ -69,7 +69,7 @@ void WinEDA_BasePcbFrame::Genere_HPGL( const wxString& FullFileName, int Layer )
return;
}
setlocale( LC_NUMERIC, "C" );
SetLocaleTo_C_standard( );
Affiche_1_Parametre( this, 0, _( "File" ), FullFileName, CYAN );
......@@ -185,7 +185,7 @@ void WinEDA_BasePcbFrame::Genere_HPGL( const wxString& FullFileName, int Layer )
/* fin */
CloseFileHPGL( dest );
setlocale( LC_NUMERIC, "" );
SetLocaleTo_Default( );
}
......
pcbnew/plotps.cpp
View file @ 777076c8
......@@ -53,7 +53,7 @@ void WinEDA_BasePcbFrame::Genere_PS( const wxString& FullFileName, int Layer, bo
return;
}
setlocale( LC_NUMERIC, "C" );
SetLocaleTo_C_standard( );
Affiche_1_Parametre( this, 0, _( "File" ), FullFileName, CYAN );
......@@ -226,7 +226,7 @@ void WinEDA_BasePcbFrame::Genere_PS( const wxString& FullFileName, int Layer, bo
// fin
CloseFilePS( dest );
setlocale( LC_NUMERIC, "" );
SetLocaleTo_Default( );
}
......
pcbnew/router.cpp
View file @ 777076c8
......@@ -573,7 +573,7 @@ void WinEDA_PcbFrame::ReadAutoroutedTracks( wxDC* DC )
Affiche_Message( msg );
}
setlocale( LC_NUMERIC, "C" );
SetLocaleTo_C_standard( );
track_width = g_DesignSettings.m_CurrentTrackWidth;
via_size = g_DesignSettings.m_CurrentViaSize;
......@@ -654,7 +654,7 @@ void WinEDA_PcbFrame::ReadAutoroutedTracks( wxDC* DC )
fclose( File );
setlocale( LC_NUMERIC, "" );
SetLocaleTo_Default( );
if( NbTrack == 0 )
DisplayError( this, wxT( "Warning: No tracks" ), 10 );
......
pcbnew/specctra.cpp
View file @ 777076c8
......@@ -3971,7 +3971,7 @@ int main( int argc, char** argv )
SPECCTRA_DB db;
bool failed = false;
setlocale( LC_NUMERIC, "C" ); // Switch the locale to standard C
SetLocaleTo_C_standard( ); // Switch the locale to standard C
if( argc == 2 )
{
......@@ -4002,7 +4002,7 @@ int main( int argc, char** argv )
db.SetFILE( stdout );
pcb->Format( &db, 0 );
setlocale( LC_NUMERIC, "" ); // revert to the current locale
SetLocaleTo_Default( ); // revert to the current locale
}
#endif
......
pcbnew/specctra_export.cpp
View file @ 777076c8
......@@ -82,7 +82,7 @@ void WinEDA_PcbFrame::ExportToSpecctra( wxCommandEvent& event )
db.SetPCB( SPECCTRA_DB::MakePCB() );
setlocale( LC_NUMERIC, "C" ); // Switch the locale to standard C
SetLocaleTo_C_standard( ); // Switch the locale to standard C
// DSN Images (=Kicad MODULES and pads) must be presented from the
// top view. So we temporarily flip any modules which are on the back
......@@ -105,7 +105,7 @@ void WinEDA_PcbFrame::ExportToSpecctra( wxCommandEvent& event )
errorText = ioe.errorText;
}
setlocale( LC_NUMERIC, "" ); // revert to the current locale
SetLocaleTo_Default( ); // revert to the current locale
// done assuredly, even if an exception was thrown and caught.
db.RevertMODULEs( m_Pcb );
......
pcbnew/specctra_import.cpp
View file @ 777076c8
......@@ -86,7 +86,7 @@ void WinEDA_PcbFrame::ImportSpecctraSession( wxCommandEvent& event )
SPECCTRA_DB db;
setlocale( LC_NUMERIC, "C" ); // Switch the locale to standard C
SetLocaleTo_C_standard( ); // Switch the locale to standard C
try
{
......@@ -95,7 +95,7 @@ void WinEDA_PcbFrame::ImportSpecctraSession( wxCommandEvent& event )
}
catch( IOError ioe )
{
setlocale( LC_NUMERIC, "" ); // revert to the current locale
SetLocaleTo_Default( ); // revert to the current locale
ioe.errorText += '\n';
ioe.errorText += _("BOARD may be corrupted, do not save it.");
......@@ -106,7 +106,7 @@ void WinEDA_PcbFrame::ImportSpecctraSession( wxCommandEvent& event )
return;
}
setlocale( LC_NUMERIC, "" ); // revert to the current locale
SetLocaleTo_Default( ); // revert to the current locale
m_SelTrackWidthBox_Changed = TRUE;
m_SelViaSizeBox_Changed = TRUE;
......
share/svg_print.cpp
View file @ 777076c8
......@@ -507,9 +507,9 @@ bool WinEDA_PrintSVGFrame::DrawPage( const wxString& FullFileName, BASE_SCREEN*
panel->m_ClipBox.SetWidth( 0x7FFFFF0 ); panel->m_ClipBox.SetHeight( 0x7FFFFF0 );
g_IsPrinting = TRUE;
setlocale( LC_NUMERIC, "C" ); // Switch the locale to standard C (needed to print floating point numbers like 1.3)
SetLocaleTo_C_standard( ); // Switch the locale to standard C (needed to print floating point numbers like 1.3)
panel->PrintPage( &dc, m_Print_Sheet_Ref, m_PrintMaskLayer );
setlocale( LC_NUMERIC, "" ); // revert to the current locale
SetLocaleTo_Default( ); // revert to the current locale
g_IsPrinting = FALSE;
panel->m_ClipBox = tmp;
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment