++common

  * changed all the RotatePoint() functions in trigo.{h,cpp} to take a double as the
    angle, which is still in tenths of degrees for now.
  * EDA_TEXT::m_Orient is now double, still in tenths of degrees (for a short while),
    but the double means parsing files and saving them use a different format string.
++pcbnew
  * DRAWSEGMENT::GetStart() and GetEnd() do not operate for S_ARC like they used to.
    They are now simply accessors for m_Start and m_End.  Use DRAWSEGMENT::GetArcStart()
    and GetArcEnd() and GetCenter() for arcs.  specctra_export.cpp was the only
    source file dependent on the old behavior.
  * DIMENSION::m_Text is now contained, not dynamically allocated.
  * more kicad_plugin work.

3d-viewer/3d_draw.cpp

@@ -568,11 +568,14 @@ void EDA_3D_CANVAS::Draw3D_DrawSegment( DRAWSEGMENT* segment )
     int color = g_ColorsSettings.GetLayerColor( layer );
 
     SetGLColor( color );
-    w  = segment->m_Width * g_Parm_3D_Visu.m_BoardScale;
-    x  = segment->m_Start.x * g_Parm_3D_Visu.m_BoardScale;
-    y  = segment->m_Start.y * g_Parm_3D_Visu.m_BoardScale;
-    xf = segment->m_End.x * g_Parm_3D_Visu.m_BoardScale;
-    yf = segment->m_End.y * g_Parm_3D_Visu.m_BoardScale;
+
+    w  = segment->GetWidth() * g_Parm_3D_Visu.m_BoardScale;
+
+    x  = segment->GetStart().x * g_Parm_3D_Visu.m_BoardScale;
+    y  = segment->GetStart().y * g_Parm_3D_Visu.m_BoardScale;
+
+    xf = segment->GetEnd().x * g_Parm_3D_Visu.m_BoardScale;
+    yf = segment->GetEnd().y * g_Parm_3D_Visu.m_BoardScale;
 
     if( layer == EDGE_N )
     {
@@ -581,10 +584,10 @@ void EDA_3D_CANVAS::Draw3D_DrawSegment( DRAWSEGMENT* segment )
             glNormal3f( 0.0, 0.0, (layer == LAYER_N_BACK) ? -1.0 : 1.0 );
             zpos = g_Parm_3D_Visu.m_LayerZcoord[layer];
 
-            switch( segment->m_Shape )
+            switch( segment->GetShape() )
             {
             case S_ARC:
-                Draw3D_ArcSegment( x, -y, xf, -yf, (double) segment->m_Angle, w, zpos );
+                Draw3D_ArcSegment( x, -y, xf, -yf, segment->GetAngle(), w, zpos );
                 break;
 
             case S_CIRCLE:
@@ -604,10 +607,10 @@ void EDA_3D_CANVAS::Draw3D_DrawSegment( DRAWSEGMENT* segment )
 
         if( Get3DLayerEnable( layer ) )
         {
-            switch( segment->m_Shape )
+            switch( segment->GetShape() )
             {
             case S_ARC:
-                Draw3D_ArcSegment( x, -y, xf, -yf, (double) segment->m_Angle, w, zpos );
+                Draw3D_ArcSegment( x, -y, xf, -yf, segment->GetAngle(), w, zpos );
                 break;
 
             case S_CIRCLE:

CHANGELOG.txt

@@ -5,6 +5,22 @@ Please add newer entries at the top, list the date and your name with
 email address.
 
 
+2011-Dec-13 UPDATE Dick Hollenbeck <dick@softplc.com>
+================================================================================
+++common
+  * changed all the RotatePoint() functions in trigo.{h,cpp} to take a double as the
+    angle, which is still in tenths of degrees for now.
+  * EDA_TEXT::m_Orient is now double, still in tenths of degrees (for a short while),
+    but the double means parsing files and saving them use a different format string.
+++pcbnew
+  * DRAWSEGMENT::GetStart() and GetEnd() do not operate for S_ARC like they used to.
+    They are now simply accessors for m_Start and m_End.  Use DRAWSEGMENT::GetArcStart()
+    and GetArcEnd() and GetCenter() for arcs.  specctra_export.cpp was the only
+    source file dependent on the old behavior.
+  * DIMENSION::m_Text is now contained, not dynamically allocated.
+  * more kicad_plugin work.
+
+
 2011-Dec-9 UPDATE Dick Hollenbeck <dick@softplc.com>
 ================================================================================
 ++PCBNew

common/trigo.cpp

@@ -215,7 +215,7 @@ int ArcTangente( int dy, int dx )
 }
 
 
-void RotatePoint( int* pX, int* pY, int angle )
+void RotatePoint( int* pX, int* pY, double angle )
 {
     int tmp;
 
@@ -248,7 +248,7 @@ void RotatePoint( int* pX, int* pY, int angle )
     }
     else
     {
-        double fangle = DEG2RAD( (double) angle / 10.0 );
+        double fangle = DEG2RAD( angle / 10.0 );
         double sinus = sin( fangle );
         double cosinus = cos( fangle );
         double fpx = (*pY * sinus ) + (*pX * cosinus );
@@ -259,7 +259,7 @@ void RotatePoint( int* pX, int* pY, int angle )
 }
 
 
-void RotatePoint( int* pX, int* pY, int cx, int cy, int angle )
+void RotatePoint( int* pX, int* pY, int cx, int cy, double angle )
 {
     int ox, oy;
 
@@ -273,7 +273,7 @@ void RotatePoint( int* pX, int* pY, int cx, int cy, int angle )
 }
 
 
-void RotatePoint( wxPoint* point, int angle )
+void RotatePoint( wxPoint* point, double angle )
 {
     int ox, oy;
 
@@ -286,7 +286,7 @@ void RotatePoint( wxPoint* point, int angle )
 }
 
 
-void RotatePoint( wxPoint* point, const wxPoint& centre, int angle )
+void RotatePoint( wxPoint* point, const wxPoint& centre, double angle )
 {
     int ox, oy;
 
@@ -299,7 +299,7 @@ void RotatePoint( wxPoint* point, const wxPoint& centre, int angle )
 }
 
 
-void RotatePoint( double* pX, double* pY, double cx, double cy, int angle )
+void RotatePoint( double* pX, double* pY, double cx, double cy, double angle )
 {
     double ox, oy;
 
@@ -313,7 +313,7 @@ void RotatePoint( double* pX, double* pY, double cx, double cy, int angle )
 }
 
 
-void RotatePoint( double* pX, double* pY, int angle )
+void RotatePoint( double* pX, double* pY, double angle )
 {
     double tmp;
 
@@ -346,7 +346,7 @@ void RotatePoint( double* pX, double* pY, int angle )
     }
     else
     {
-        double fangle = DEG2RAD( (double) angle / 10.0 );
+        double fangle = DEG2RAD( angle / 10.0 );
         double sinus = sin( fangle );
         double cosinus = cos( fangle );
 

eeschema/lib_text.cpp

@@ -72,7 +72,7 @@ bool LIB_TEXT::Save( OUTPUTFORMATTER& aFormatter )
         text.Replace( wxT( " " ), wxT( "~" ) );
     }
 
-    aFormatter.Print( 0, "T %d %d %d %d %d %d %d %s ", m_Orient, m_Pos.x, m_Pos.y,
+    aFormatter.Print( 0, "T %g %d %d %d %d %d %d %s ", GetOrientation(), m_Pos.x, m_Pos.y,
                       m_Size.x, m_Attributs, m_Unit, m_Convert, TO_UTF8( text ) );
 
     aFormatter.Print( 0, " %s %d", m_Italic ? "Italic" : "Normal", ( m_Bold > 0 ) ? 1 : 0 );
@@ -104,12 +104,13 @@ bool LIB_TEXT::Load( LINE_READER& aLineReader, wxString& errorMsg )
     char    buf[256];
     char    tmp[256];
     char*   line = (char*) aLineReader;
+    double  angle;
 
     buf[0] = 0;
     tmp[0] = 0;         // For italic option, Not in old versions
 
-    cnt = sscanf( line + 2, "%d %d %d %d %d %d %d \"%[^\"]\" %s %d %c %c",
-                  &m_Orient, &m_Pos.x, &m_Pos.y, &m_Size.x, &m_Attributs,
+    cnt = sscanf( line + 2, "%lf %d %d %d %d %d %d \"%[^\"]\" %s %d %c %c",
+                  &angle, &m_Pos.x, &m_Pos.y, &m_Size.x, &m_Attributs,
                   &m_Unit, &m_Convert, buf, tmp, &thickness, &hjustify,
                   &vjustify );
 
@@ -123,7 +124,7 @@ bool LIB_TEXT::Load( LINE_READER& aLineReader, wxString& errorMsg )
     else
     {
         cnt = sscanf( line + 2, "%d %d %d %d %d %d %d %s %s %d %c %c",
-                      &m_Orient, &m_Pos.x, &m_Pos.y, &m_Size.x, &m_Attributs,
+                      &angle, &m_Pos.x, &m_Pos.y, &m_Size.x, &m_Attributs,
                       &m_Unit, &m_Convert, buf, tmp, &thickness, &hjustify,
                       &vjustify );
 
@@ -138,6 +139,8 @@ bool LIB_TEXT::Load( LINE_READER& aLineReader, wxString& errorMsg )
         m_Text.Replace( wxT( "~" ), wxT( " " ) );
     }
 
+    SetOrientation( angle );
+
     m_Size.y = m_Size.x;
 
     if( strnicmp( tmp, "Italic", 6 ) == 0 )

gerbview/class_gerber_draw_item.cpp

@@ -72,7 +72,7 @@ GERBER_DRAW_ITEM::GERBER_DRAW_ITEM( const GERBER_DRAW_ITEM& aSource ) :
     m_Flags     = aSource.m_Flags;
     SetTimeStamp( aSource.m_TimeStamp );
 
-    SetStatus( aSource.ReturnStatus() );
+    SetStatus( aSource.GetStatus() );
     m_Start         = aSource.m_Start;
     m_End           = aSource.m_End;
     m_Size          = aSource.m_Size;

gerbview/export_to_pcbnew.cpp

@@ -256,9 +256,9 @@ void GBR_TO_PCB_EXPORTER::export_non_copper_item( GERBER_DRAW_ITEM* aGbrItem, in
     DRAWSEGMENT* drawitem = new DRAWSEGMENT( m_pcb, PCB_LINE_T );
 
     drawitem->SetLayer( aLayer );
-    drawitem->m_Start = aGbrItem->m_Start;
-    drawitem->m_End   = aGbrItem->m_End;
-    drawitem->m_Width = aGbrItem->m_Size.x;
+    drawitem->SetStart( aGbrItem->m_Start );
+    drawitem->SetEnd( aGbrItem->m_End );
+    drawitem->SetWidth( aGbrItem->m_Size.x );
 
     if( aGbrItem->m_Shape == GBR_ARC )
     {
@@ -267,20 +267,20 @@ void GBR_TO_PCB_EXPORTER::export_non_copper_item( GERBER_DRAW_ITEM* aGbrItem, in
         double b  = atan2( (double)( aGbrItem->m_End.y - aGbrItem->m_ArcCentre.y ),
                            (double)( aGbrItem->m_End.x - aGbrItem->m_ArcCentre.x ) );
 
-        drawitem->m_Shape   = S_ARC;
-        drawitem->m_Angle   = wxRound( (a - b) / M_PI * 1800.0 );
-        drawitem->m_Start = aGbrItem->m_ArcCentre;
+        drawitem->SetShape( S_ARC );
+        drawitem->SetAngle( wxRound( (a - b) / M_PI * 1800.0 ) );
+        drawitem->SetStart( aGbrItem->m_ArcCentre );
 
-        if( drawitem->m_Angle < 0 )
+        if( drawitem->GetAngle() < 0 )
         {
-            NEGATE( drawitem->m_Angle );
-            drawitem->m_End = aGbrItem->m_Start;
+            drawitem->SetAngle( -drawitem->GetAngle() );
+            drawitem->SetEnd( aGbrItem->m_Start );
         }
     }
 
     // Reverse Y axis:
-    NEGATE( drawitem->m_Start.y );
-    NEGATE( drawitem->m_End.y );
+    drawitem->SetStartY( -drawitem->GetStart().y );
+    drawitem->SetEndY( -drawitem->GetEnd().y );
 
     m_pcb->Add( drawitem );
 }

include/base_struct.h

@@ -447,7 +447,6 @@ public:
         return m_Status & type;
     }
 
-
     void SetState( int type, int state )
     {
         if( state )
@@ -456,13 +455,8 @@ public:
             m_Status &= ~type;
     }
 
-
-    int ReturnStatus() const {  return m_Status;  }
-
-    void SetStatus( int new_status )
-    {
-        m_Status = new_status;
-    }
+    int GetStatus() const           { return m_Status; }
+    void SetStatus( int aStatus )   { m_Status = aStatus; }
 
     void SetFlags( int aMask ) { m_Flags |= aMask; }
     void ClearFlags( int aMask = EDA_ITEM_ALL_FLAGS ) { m_Flags &= ~aMask; }
@@ -798,7 +792,7 @@ class EDA_TEXT
 public:
     wxString m_Text;
     int      m_Thickness;               ///< pen size used to draw this text
-    int      m_Orient;                  ///< Orient in 0.1 degrees
+    double   m_Orient;                  ///< Orient in 0.1 degrees
     wxPoint  m_Pos;                     ///< XY position of anchor text.
     wxSize   m_Size;                    ///< XY size of text
     bool     m_Mirror;                  ///< true iff mirrored
@@ -832,8 +826,8 @@ public:
      */
     int GetThickness() const { return m_Thickness; };
 
-    void SetOrientation( int aOrientation ) { m_Orient = aOrientation; }
-    int  GetOrientation() const { return m_Orient; }
+    void SetOrientation( double aOrientation ) { m_Orient = aOrientation; }
+    double GetOrientation() const { return m_Orient; }
 
     void SetItalic( bool isItalic ) { m_Italic = isItalic; }
     bool IsItalic() const { return m_Italic; }

include/class_board_item.h

@@ -194,7 +194,7 @@ public:
      * @param aRotCentre - the rotation point.
      * @param aAngle - the rotation angle in 0.1 degree.
      */
-    virtual void Rotate( const wxPoint& aRotCentre, int aAngle )
+    virtual void Rotate( const wxPoint& aRotCentre, double aAngle )
     {
         wxMessageBox( wxT( "virtual BOARD_ITEM::Rotate used, should not occur" ), GetClass() );
     }

include/footprint_info.h

@@ -43,7 +43,7 @@ public:
      * Function GetCount
      * @return the number of items stored in list
      */
-    unsigned GetCount() { return m_List.size(); }
+    unsigned GetCount() const { return m_List.size(); }
 
     /**
      * Function GetModuleInfo

include/trigo.h

@@ -10,29 +10,29 @@
  * Calculate the new point of coord coord pX, pY,
  * for a rotation center 0, 0, and angle in (1 / 10 degree)
  */
-void RotatePoint( int *pX, int *pY, int angle );
+void RotatePoint( int *pX, int *pY, double angle );
 
 /*
  * Calculate the new point of coord coord pX, pY,
  * for a rotation center cx, cy, and angle in (1 / 10 degree)
  */
-void RotatePoint( int *pX, int *pY, int cx, int cy, int angle );
+void RotatePoint( int *pX, int *pY, int cx, int cy, double angle );
 
 /*
  * Calculates the new coord point point
  * for a rotation angle in (1 / 10 degree)
  */
-void RotatePoint( wxPoint* point, int angle );
+void RotatePoint( wxPoint* point, double angle );
 
 /*
  * Calculates the new coord point point
  * for a center rotation center and angle in (1 / 10 degree)
  */
-void RotatePoint( wxPoint *point, const wxPoint & centre, int angle );
+void RotatePoint( wxPoint *point, const wxPoint & centre, double angle );
 
-void RotatePoint( double *pX, double *pY, int angle );
+void RotatePoint( double *pX, double *pY, double angle );
 
-void RotatePoint( double *pX, double *pY, double cx, double cy, int angle );
+void RotatePoint( double *pX, double *pY, double cx, double cy, double angle );
 
 /* Return the arc tangent of 0.1 degrees coord vector dx, dy
  * between -1800 and 1800

pcbnew/autoplac.cpp

@@ -519,10 +519,10 @@ int PCB_EDIT_FRAME::GenPlaceBoard()
             if( DrawSegm->GetLayer() != EDGE_N )
                 break;
 
-            TmpSegm.m_Start = DrawSegm->m_Start;
-            TmpSegm.m_End   = DrawSegm->m_End;
-            TmpSegm.m_Shape = DrawSegm->m_Shape;
-            TmpSegm.m_Param = DrawSegm->m_Angle;
+            TmpSegm.SetStart( DrawSegm->GetStart() );
+            TmpSegm.SetEnd(   DrawSegm->GetEnd() );
+            TmpSegm.SetShape( DrawSegm->GetShape() );
+            TmpSegm.m_Param = DrawSegm->GetAngle();
 
             TraceSegmentPcb( GetBoard(), &TmpSegm, HOLE | CELL_is_EDGE,
                              Board.m_GridRouting, WRITE_CELL );

pcbnew/block_module_editor.cpp

@@ -483,10 +483,10 @@ void MoveMarkedItems( MODULE* module, wxPoint offset )
         case PCB_MODULE_EDGE_T:
             {
                 EDGE_MODULE* em = (EDGE_MODULE*) item;
-                em->m_Start  += offset;
-                em->m_End    += offset;
-                em->m_Start0 += offset;
-                em->m_End0   += offset;
+                em->SetStart( em->GetStart() + offset );
+                em->SetEnd( em->GetEnd() + offset );
+                em->SetStart0( em->GetStart0() + offset );
+                em->SetEnd0( em->GetEnd0() + offset );
             }
             break;
 
@@ -537,20 +537,17 @@ void DeleteMarkedItems( MODULE* module )
 }
 
 
-/* Mirror marked items, refer to a Vertical axis at position offset
+/** Mirror marked items, refer to a Vertical axis at position offset
  */
 void MirrorMarkedItems( MODULE* module, wxPoint offset )
 {
 #define SETMIRROR( z ) (z) -= offset.x; (z) = -(z); (z) += offset.x;
-    EDA_ITEM*   item;
     wxPoint     tmp;
 
     if( module == NULL )
         return;
 
-    D_PAD* pad = module->m_Pads;
-
-    for( ; pad != NULL; pad = pad->Next() )
+    for( D_PAD* pad = module->m_Pads;  pad;  pad = pad->Next() )
     {
         if( pad->m_Selected == 0 )
             continue;
@@ -566,9 +563,7 @@ void MirrorMarkedItems( MODULE* module, wxPoint offset )
         NORMALIZE_ANGLE_POS( pad->m_Orient );
     }
 
-    item = module->m_Drawings;
-
-    for( ; item != NULL; item = item->Next() )
+    for( EDA_ITEM* item = module->m_Drawings;  item;  item = item->Next() )
     {
         if( item->m_Selected == 0 )
             continue;
@@ -578,11 +573,18 @@ void MirrorMarkedItems( MODULE* module, wxPoint offset )
         case PCB_MODULE_EDGE_T:
             {
                 EDGE_MODULE* em = (EDGE_MODULE*) item;
-                SETMIRROR( em->m_Start.x );
-                em->m_Start0.x = em->m_Start.x;
-                SETMIRROR( em->m_End.x );
-                em->m_End0.x = em->m_End.x;
-                NEGATE( em->m_Angle );
+
+                tmp = em->GetStart0();
+                SETMIRROR( tmp.x );
+                em->SetStart0( tmp );
+                em->SetStartX( tmp.x );
+
+                tmp = em->GetEnd0();
+                SETMIRROR( tmp.x );
+                em->SetEnd0( tmp );
+                em->SetEndX( tmp.x );
+
+                em->SetAngle( -em->GetAngle() );
             }
             break;
 
@@ -607,19 +609,16 @@ void MirrorMarkedItems( MODULE* module, wxPoint offset )
 }
 
 
-/* Rotate marked items, refer to a Vertical axis at position offset
+/** Rotate marked items, refer to a Vertical axis at position offset
  */
 void RotateMarkedItems( MODULE* module, wxPoint offset )
 {
 #define ROTATE( z ) RotatePoint( (&z), offset, 900 )
-    EDA_ITEM* item;
 
     if( module == NULL )
         return;
 
-    D_PAD* pad = module->m_Pads;
-
-    for( ; pad != NULL; pad = pad->Next() )
+    for( D_PAD* pad = module->m_Pads;  pad;  pad = pad->Next() )
     {
         if( pad->m_Selected == 0 )
             continue;
@@ -633,9 +632,7 @@ void RotateMarkedItems( MODULE* module, wxPoint offset )
         NORMALIZE_ANGLE_POS( pad->m_Orient );
     }
 
-    item = module->m_Drawings;
-
-    for( ; item != NULL; item = item->Next() )
+    for( EDA_ITEM* item = module->m_Drawings;  item;  item = item->Next() )
     {
         if( item->m_Selected == 0 )
             continue;
@@ -645,10 +642,16 @@ void RotateMarkedItems( MODULE* module, wxPoint offset )
         case PCB_MODULE_EDGE_T:
             {
                 EDGE_MODULE* em = (EDGE_MODULE*) item;
-                ROTATE( em->m_Start );
-                em->m_Start0 = em->m_Start;
-                ROTATE( em->m_End );
-                em->m_End0 = em->m_End;
+
+                wxPoint tmp = em->GetStart();
+                ROTATE( tmp );
+                em->SetStart( tmp );
+                em->SetStart0( tmp );
+
+                tmp = em->GetEnd();
+                ROTATE( tmp );
+                em->SetEnd( tmp );
+                em->SetEnd0( tmp );
             }
             break;
 

pcbnew/board.cpp

@@ -234,11 +234,11 @@ void PlaceCells( BOARD* aPcb, int net_code, int flag )
                 if( tmpSegm.GetLayer() == EDGE_N )
                     tmpSegm.SetLayer( -1 );
 
-                tmpSegm.m_Start = edge->m_Start;
-                tmpSegm.m_End   = edge->m_End;
-                tmpSegm.m_Shape = edge->m_Shape;
-                tmpSegm.m_Width = edge->m_Width;
-                tmpSegm.m_Param = edge->m_Angle;
+                tmpSegm.SetStart( edge->GetStart() );
+                tmpSegm.SetEnd(   edge->GetEnd() );
+                tmpSegm.SetShape( edge->GetShape() );
+                tmpSegm.SetWidth( edge->GetWidth() );
+                tmpSegm.m_Param = edge->GetAngle();
                 tmpSegm.SetNet( -1 );
 
                 TraceSegmentPcb( aPcb, &tmpSegm, HOLE, marge, WRITE_CELL );
@@ -271,11 +271,11 @@ void PlaceCells( BOARD* aPcb, int net_code, int flag )
                 type_cell |= CELL_is_EDGE;
             }
 
-            tmpSegm.m_Start = DrawSegm->m_Start;
-            tmpSegm.m_End   = DrawSegm->m_End;
-            tmpSegm.m_Shape = DrawSegm->m_Shape;
-            tmpSegm.m_Width = DrawSegm->m_Width;
-            tmpSegm.m_Param = DrawSegm->m_Angle;
+            tmpSegm.SetStart( DrawSegm->GetStart() );
+            tmpSegm.SetEnd(   DrawSegm->GetEnd() );
+            tmpSegm.SetShape( DrawSegm->GetShape() );
+            tmpSegm.SetWidth( DrawSegm->GetWidth() );
+            tmpSegm.m_Param = DrawSegm->GetAngle();
             tmpSegm.SetNet( -1 );
 
             TraceSegmentPcb( aPcb, &tmpSegm, type_cell, marge, WRITE_CELL );

pcbnew/board_undo_redo.cpp

@@ -203,10 +203,18 @@ void SwapData( BOARD_ITEM* aItem, BOARD_ITEM* aImage )
         break;
 
     case PCB_LINE_T:
+#if 0
         EXCHG( ( (DRAWSEGMENT*) aItem )->m_Start, ( (DRAWSEGMENT*) aImage )->m_Start );
         EXCHG( ( (DRAWSEGMENT*) aItem )->m_End, ( (DRAWSEGMENT*) aImage )->m_End );
         EXCHG( ( (DRAWSEGMENT*) aItem )->m_Width, ( (DRAWSEGMENT*) aImage )->m_Width );
         EXCHG( ( (DRAWSEGMENT*) aItem )->m_Shape, ( (DRAWSEGMENT*) aImage )->m_Shape );
+#else
+        {
+            DRAWSEGMENT tmp = *(DRAWSEGMENT*) aImage;
+            *aImage = *aItem;
+            *aItem  = tmp;
+        }
+#endif
         break;
 
     case PCB_TRACE_T:
@@ -231,12 +239,12 @@ void SwapData( BOARD_ITEM* aItem, BOARD_ITEM* aImage )
             EXCHG(itmp, atmp );
 
             if( atmp > 0 )
-            track->SetDrillValue( atmp );
+                track->SetDrill( atmp );
             else
                 track->SetDrillDefault();
 
             if( itmp > 0 )
-            image->SetDrillValue( itmp );
+                image->SetDrill( itmp );
             else
                 image->SetDrillDefault();
         }
@@ -256,10 +264,7 @@ void SwapData( BOARD_ITEM* aItem, BOARD_ITEM* aImage )
         break;
 
     case PCB_TARGET_T:
-        EXCHG( ( (PCB_TARGET*) aItem )->m_Pos, ( (PCB_TARGET*) aImage )->m_Pos );
-        EXCHG( ( (PCB_TARGET*) aItem )->m_Width, ( (PCB_TARGET*) aImage )->m_Width );
-        EXCHG( ( (PCB_TARGET*) aItem )->m_Size, ( (PCB_TARGET*) aImage )->m_Size );
-        EXCHG( ( (PCB_TARGET*) aItem )->m_Shape, ( (PCB_TARGET*) aImage )->m_Shape );
+        ( (PCB_TARGET*) aItem )->Exchg( (PCB_TARGET*) aImage );
         break;
 
     case PCB_DIMENSION_T:
@@ -268,12 +273,12 @@ void SwapData( BOARD_ITEM* aItem, BOARD_ITEM* aImage )
             ( (DIMENSION*) aItem )->SetText( ( (DIMENSION*) aImage )->GetText() );
             ( (DIMENSION*) aImage )->SetText( txt );
             EXCHG( ( (DIMENSION*) aItem )->m_Width, ( (DIMENSION*) aImage )->m_Width );
-        EXCHG( ( (DIMENSION*) aItem )->m_Text->m_Size, ( (DIMENSION*) aImage )->m_Text->m_Size );
-        EXCHG( ( (DIMENSION*) aItem )->m_Text->m_Pos, ( (DIMENSION*) aImage )->m_Text->m_Pos );
-        EXCHG( ( (DIMENSION*) aItem )->m_Text->m_Thickness,
-               ( (DIMENSION*) aImage )->m_Text->m_Thickness );
-        EXCHG( ( (DIMENSION*) aItem )->m_Text->m_Mirror,
-               ( (DIMENSION*) aImage )->m_Text->m_Mirror );
+            EXCHG( ( (DIMENSION*) aItem )->m_Text.m_Size, ( (DIMENSION*) aImage )->m_Text.m_Size );
+            EXCHG( ( (DIMENSION*) aItem )->m_Text.m_Pos, ( (DIMENSION*) aImage )->m_Text.m_Pos );
+            EXCHG( ( (DIMENSION*) aItem )->m_Text.m_Thickness,
+                   ( (DIMENSION*) aImage )->m_Text.m_Thickness );
+            EXCHG( ( (DIMENSION*) aItem )->m_Text.m_Mirror,
+                   ( (DIMENSION*) aImage )->m_Text.m_Mirror );
         }
         break;
 

pcbnew/class_board_connected_item.cpp

@@ -115,25 +115,30 @@ NETCLASS* BOARD_CONNECTED_ITEM::GetNetClass() const
     // It is important that this be implemented without any sequential searching.
     // Simple array lookups should be fine, performance-wise.
     BOARD*  board = GetBoard();
+
     // DO NOT use wxASSERT, because GetNetClass is called inside an OnPaint event
     // and a call to wxASSERT can crash the application.
-    if( board == NULL )     // Should not occurs
+
+    if( board == NULL )     // Should not occur
     {
 #ifdef __WXDEBUG__
-        wxLogWarning(wxT("BOARD_CONNECTED_ITEM::GetNetClass():NULL board,type %d"), Type() );
+        wxLogWarning( wxT("BOARD_CONNECTED_ITEM::GetNetClass():NULL board,type %d"), Type() );
 #endif
         return NULL;
     }
 
     NETCLASS*       netclass = NULL;
-    NETINFO_ITEM* net = board->FindNet( GetNet() );
+    int             netcode  = GetNet();
+    NETINFO_ITEM*   net = board->FindNet( netcode );
+
     if( net )
     {
         netclass = net->GetNetClass();
+
 #ifdef __WXDEBUG__
         if( netclass == NULL )
         {
-            wxLogWarning(wxT("BOARD_CONNECTED_ITEM::GetNetClass():NULL netclass,type %d"), Type());
+            wxLogWarning( wxT("BOARD_CONNECTED_ITEM::GetNetClass():NULL netclass,type %d"), Type() );
         }
 #endif
     }
@@ -148,7 +153,7 @@ NETCLASS* BOARD_CONNECTED_ITEM::GetNetClass() const
  * Function GetNetClassName
  * @return the Net Class name of this item
  */
-wxString BOARD_CONNECTED_ITEM::GetNetClassName( ) const
+wxString BOARD_CONNECTED_ITEM::GetNetClassName() const
 {
     wxString    name;
     NETCLASS*   myclass = GetNetClass();

pcbnew/class_board_connected_item.h

@@ -15,7 +15,7 @@ class D_PAD;
 
 /**
  * Class BOARD_CONNECTED_ITEM
- * This is a base class derived from BOARD_ITEM for items that can be connected
+ * is a base class derived from BOARD_ITEM for items that can be connected
  * and have a net, a netname, a clearance ...
  * mainly: tracks, pads and zones
  * Handle connection info
@@ -89,9 +89,9 @@ public:
 };
 
 
-/*
- * class BOARD_ITEM_LIST
- * Handles a collection of BOARD_ITEM elements
+/**
+ * Class BOARD_ITEM_LIST
+ * is a container for a list of BOARD_ITEMs.
  */
 class BOARD_ITEM_LIST : public BOARD_ITEM
 {
@@ -204,4 +204,4 @@ public:
 };
 
 
-#endif /* BOARD_CONNECTED_ITEM_H */
+#endif // BOARD_CONNECTED_ITEM_H

pcbnew/class_dimension.cpp

@@ -20,46 +20,45 @@
 
 
 DIMENSION::DIMENSION( BOARD_ITEM* aParent ) :
-    BOARD_ITEM( aParent, PCB_DIMENSION_T )
+    BOARD_ITEM( aParent, PCB_DIMENSION_T ),
+    m_Text( this )
 {
     m_Layer = DRAW_LAYER;
     m_Width = 50;
     m_Value = 0;
     m_Shape = 0;
     m_Unit  = INCHES;
-    m_Text  = new TEXTE_PCB( this );
 }
 
 
 DIMENSION::~DIMENSION()
 {
-    delete m_Text;
 }
 
 
 void DIMENSION::SetPosition( const wxPoint& aPos )
 {
     m_Pos = aPos;
-    m_Text->SetPos( aPos );
+    m_Text.SetPos( aPos );
 }
 
 
 void DIMENSION::SetText( const wxString& aNewText )
 {
-    m_Text->SetText( aNewText );
+    m_Text.SetText( aNewText );
 }
 
 
 const wxString DIMENSION::GetText() const
 {
-    return m_Text->GetText();
+    return m_Text.GetText();
 }
 
 
 void DIMENSION::SetLayer( int aLayer )
 {
     m_Layer = aLayer;
-    m_Text->SetLayer( aLayer);
+    m_Text.SetLayer( aLayer);
 }
 
 
@@ -72,7 +71,7 @@ void DIMENSION::Copy( DIMENSION* source )
     m_Shape     = source->m_Shape;
     m_Unit      = source->m_Unit;
     SetTimeStamp( GetNewTimeStamp() );
-    m_Text->Copy( source->m_Text );
+    m_Text.Copy( &source->m_Text );
 
     m_crossBarOx    = source->m_crossBarOx;
     m_crossBarOy    = source->m_crossBarOy;
@@ -105,10 +104,10 @@ void DIMENSION::Copy( DIMENSION* source )
 }
 
 
-void DIMENSION::Move(const wxPoint& offset)
+void DIMENSION::Move( const wxPoint& offset )
 {
     m_Pos += offset;
-    m_Text->m_Pos += offset;
+    m_Text.m_Pos += offset;
     m_crossBarOx    += offset.x;
     m_crossBarOy    += offset.y;
     m_crossBarFx    += offset.x;
@@ -140,13 +139,13 @@ void DIMENSION::Move(const wxPoint& offset)
 }
 
 
-void DIMENSION::Rotate( const wxPoint& aRotCentre, int aAngle )
+void DIMENSION::Rotate( const wxPoint& aRotCentre, double aAngle )
 {
     RotatePoint( &m_Pos, aRotCentre, aAngle );
 
-    RotatePoint( &m_Text->m_Pos, aRotCentre, aAngle );
+    RotatePoint( &m_Text.m_Pos, aRotCentre, aAngle );
 
-    int newAngle = m_Text->GetOrientation() + aAngle;
+    double newAngle = m_Text.GetOrientation() + aAngle;
 
     if( newAngle >= 3600 )
         newAngle -= 3600;
@@ -154,7 +153,7 @@ void DIMENSION::Rotate( const wxPoint& aRotCentre, int aAngle )
     if( newAngle > 900  &&  newAngle < 2700 )
         newAngle -= 1800;
 
-    m_Text->SetOrientation( newAngle );
+    m_Text.SetOrientation( newAngle );
 
     RotatePoint( &m_crossBarOx, &m_crossBarOy, aRotCentre.x, aRotCentre.y, aAngle );
     RotatePoint( &m_crossBarFx, &m_crossBarFy, aRotCentre.x, aRotCentre.y, aAngle );
@@ -180,21 +179,21 @@ void DIMENSION::Flip( const wxPoint& aCentre )
 }
 
 
-void DIMENSION::Mirror(const wxPoint& axis_pos)
+void DIMENSION::Mirror( const wxPoint& axis_pos )
 {
 #define INVERT( pos )       (pos) = axis_pos.y - ( (pos) - axis_pos.y )
     INVERT( m_Pos.y );
-    INVERT( m_Text->m_Pos.y );
+    INVERT( m_Text.m_Pos.y );
 
     // invert angle
-    int newAngle = m_Text->GetOrientation();
+    double newAngle = m_Text.GetOrientation();
     if( newAngle >= 3600 )
         newAngle -= 3600;
 
     if( newAngle > 900  &&  newAngle < 2700 )
         newAngle -= 1800;
 
-    m_Text->SetOrientation( newAngle );
+    m_Text.SetOrientation( newAngle );
 
     INVERT( m_crossBarOy );
     INVERT( m_crossBarFy );
@@ -217,25 +216,25 @@ void DIMENSION::AdjustDimensionDetails( bool aDoNotChangeText )
 {
     #define ARROW_SIZE 500    //size of arrows
     int      ii;
-    int      mesure, deltax, deltay;            /* value of the measure on X and Y axes */
-    int      arrow_up_X = 0, arrow_up_Y = 0;    /* coordinates of arrow line / */
-    int      arrow_dw_X = 0, arrow_dw_Y = 0;    /* coordinates of arrow line \ */
-    int      hx, hy;                            /* dimension line interval */
-    float    angle, angle_f;
+    int      mesure, deltax, deltay;            //  value of the measure on X and Y axes
+    int      arrow_up_X = 0, arrow_up_Y = 0;    //  coordinates of arrow line /
+    int      arrow_dw_X = 0, arrow_dw_Y = 0;    //  coordinates of arrow line '\'
+    int      hx, hy;                            //  dimension line interval
+    double   angle, angle_f;
     wxString msg;
 
-    /* Init layer : */
-    m_Text->SetLayer( GetLayer() );
+    // Init layer :
+    m_Text.SetLayer( GetLayer() );
 
-    /* calculate the size of the dimension (text + line above the text) */
-    ii = m_Text->m_Size.y +
-         m_Text->GetThickness() + (m_Width * 3);
+    // calculate the size of the dimension (text + line above the text)
+    ii = m_Text.m_Size.y +
+         m_Text.GetThickness() + (m_Width * 3);
 
     deltax = m_featureLineDOx - m_featureLineGOx;
     deltay = m_featureLineDOy - m_featureLineGOy;
 
     // Calculate dimension value
-    mesure = wxRound(hypot( (double) deltax, (double) deltay ) );
+    mesure = wxRound( hypot( (double) deltax, (double) deltay ) );
 
     if( deltax || deltay )
         angle = atan2( (double) deltay, (double) deltax );
@@ -302,11 +301,11 @@ void DIMENSION::AdjustDimensionDetails( bool aDoNotChangeText )
     m_featureLineDFx = m_crossBarFx + hx;
     m_featureLineDFy = m_crossBarFy + hy;
 
-    /* Calculate the better text position and orientation: */
-    m_Pos.x = m_Text->m_Pos.x = (m_crossBarFx + m_featureLineGFx) / 2;
-    m_Pos.y = m_Text->m_Pos.y = (m_crossBarFy + m_featureLineGFy) / 2;
+    // Calculate the better text position and orientation:
+    m_Pos.x = m_Text.m_Pos.x = (m_crossBarFx + m_featureLineGFx) / 2;
+    m_Pos.y = m_Text.m_Pos.y = (m_crossBarFy + m_featureLineGFy) / 2;
 
-    int newAngle = -(int) (angle * 1800 / M_PI);
+    double newAngle = -(angle * 1800 / M_PI);
     if( newAngle < 0 )
         newAngle += 3600;
 
@@ -316,7 +315,7 @@ void DIMENSION::AdjustDimensionDetails( bool aDoNotChangeText )
     if( newAngle > 900  &&  newAngle < 2700 )
         newAngle -= 1800;
 
-    m_Text->SetOrientation( newAngle );
+    m_Text.SetOrientation( newAngle );
 
     if( !aDoNotChangeText )
     {
@@ -334,7 +333,7 @@ void DIMENSION::Draw( EDA_DRAW_PANEL* panel, wxDC* DC, int mode_color, const wxP
     ox = -offset.x;
     oy = -offset.y;
 
-    m_Text->Draw( panel, DC, mode_color, offset );
+    m_Text.Draw( panel, DC, mode_color, offset );
 
     BOARD * brd =  GetBoard( );
 
@@ -417,7 +416,7 @@ void DIMENSION::Draw( EDA_DRAW_PANEL* panel, wxDC* DC, int mode_color, const wxP
 void DIMENSION::DisplayInfo( EDA_DRAW_FRAME* frame )
 {
     // for now, display only the text within the DIMENSION using class TEXTE_PCB.
-    m_Text->DisplayInfo( frame );
+    m_Text.DisplayInfo( frame );
 }
 
 
@@ -426,14 +425,14 @@ bool DIMENSION::HitTest( const wxPoint& aPoint )
     int ux0, uy0;
     int dx, dy, spot_cX, spot_cY;
 
-    if( m_Text && m_Text->TextHitTest( aPoint ) )
+    if( m_Text.TextHitTest( aPoint ) )
         return true;
 
-    /* Locate SEGMENTS? */
+    // Locate SEGMENTS?
     ux0 = m_crossBarOx;
     uy0 = m_crossBarOy;
 
-    /* Recalculate coordinates with ux0, uy0 = origin. */
+    // Recalculate coordinates with ux0, uy0 = origin.
     dx = m_crossBarFx - ux0;
     dy = m_crossBarFy - uy0;
 
@@ -533,7 +532,7 @@ EDA_RECT DIMENSION::GetBoundingBox() const
     EDA_RECT bBox;
     int xmin, xmax, ymin, ymax;
 
-    bBox = m_Text->GetTextBox( -1 );
+    bBox = m_Text.GetTextBox( -1 );
     xmin = bBox.GetX();
     xmax = bBox.GetRight();
     ymin = bBox.GetY();

pcbnew/class_dimension.h

@@ -3,8 +3,8 @@
  * @brief DIMENSION class definition.
  */
 
-#ifndef DIMENSION_H
-#define DIMENSION_H
+#ifndef DIMENSION_H_
+#define DIMENSION_H_
 
 
 #include "class_board_item.h"
@@ -21,10 +21,10 @@ public:
     int        m_Width;
     wxPoint    m_Pos;
     int        m_Shape;
-    int        m_Unit;  /* 0 = inches, 1 = mm */
-    int        m_Value; /* value of  PCB dimensions. */
+    int        m_Unit;          /// 0 = inches, 1 = mm
+    int        m_Value;         /// value of  PCB dimensions.
 
-    TEXTE_PCB* m_Text;
+    TEXTE_PCB  m_Text;
     int        m_crossBarOx, m_crossBarOy, m_crossBarFx, m_crossBarFy;
     int        m_featureLineGOx, m_featureLineGOy, m_featureLineGFx, m_featureLineGFy;
     int        m_featureLineDOx, m_featureLineDOy, m_featureLineDFx, m_featureLineDFy;
@@ -43,7 +43,7 @@ public:
 
     void SetTextSize( const wxSize& aTextSize )
     {
-        m_Text->SetSize( aTextSize );
+        m_Text.SetSize( aTextSize );
     }
 
     /**
@@ -53,6 +53,12 @@ public:
      */
     void SetLayer( int aLayer );
 
+    void SetShape( int aShape )         { m_Shape = aShape; }
+    int GetShape() const                { return m_Shape; }
+
+    int GetWidth() const                { return m_Width; }
+    void SetWidth( int aWidth )         { m_Width = aWidth; }
+
     /**
      * Function AdjustDimensionDetails
      * Calculate coordinates of segments used to draw the dimension.
@@ -90,7 +96,7 @@ public:
      * @param aRotCentre - the rotation point.
      * @param aAngle - the rotation angle in 0.1 degree.
      */
-    virtual void Rotate( const wxPoint& aRotCentre, int aAngle );
+    virtual void Rotate( const wxPoint& aRotCentre, double aAngle );
 
     /**
      * Function Flip
@@ -151,4 +157,4 @@ public:
     virtual BITMAP_DEF GetMenuImage() const { return  add_dimension_xpm; }
 };
 
-#endif  // #define DIMENSION_H
+#endif  // DIMENSION_H_

pcbnew/class_drawsegment.cpp

@@ -31,31 +31,40 @@ DRAWSEGMENT::DRAWSEGMENT( BOARD_ITEM* aParent, KICAD_T idtype ) :
 }
 
 
-DRAWSEGMENT:: ~DRAWSEGMENT()
+DRAWSEGMENT::~DRAWSEGMENT()
 {
 }
 
 
+const DRAWSEGMENT& DRAWSEGMENT::operator = ( const DRAWSEGMENT& rhs )
+{
+    // skip the linked list stuff, and parent
+
+    m_Type         = rhs.m_Type;
+    m_Layer        = rhs.m_Layer;
+    m_Width        = rhs.m_Width;
+    m_Start        = rhs.m_Start;
+    m_End          = rhs.m_End;
+    m_Shape        = rhs.m_Shape;
+    m_Angle        = rhs.m_Angle;
+    m_TimeStamp    = rhs.m_TimeStamp;
+    m_BezierC1     = rhs.m_BezierC1;
+    m_BezierC2     = rhs.m_BezierC1;
+    m_BezierPoints = rhs.m_BezierPoints;
+
+    return *this;
+}
+
+
 void DRAWSEGMENT::Copy( DRAWSEGMENT* source )
 {
-    if( source == NULL )
+    if( source == NULL )    // who would do this?
         return;
 
-    m_Type         = source->m_Type;
-    m_Layer        = source->m_Layer;
-    m_Width        = source->m_Width;
-    m_Start        = source->m_Start;
-    m_End          = source->m_End;
-    m_Shape        = source->m_Shape;
-    m_Angle        = source->m_Angle;
-    SetTimeStamp( source->m_TimeStamp );
-    m_BezierC1     = source->m_BezierC1;
-    m_BezierC2     = source->m_BezierC1;
-    m_BezierPoints = source->m_BezierPoints;
+    *this = *source;    // operator = ()
 }
 
-
-void DRAWSEGMENT::Rotate( const wxPoint& aRotCentre, int aAngle )
+void DRAWSEGMENT::Rotate( const wxPoint& aRotCentre, double aAngle )
 {
     RotatePoint( &m_Start, aRotCentre, aAngle );
     RotatePoint( &m_End, aRotCentre, aAngle );
@@ -74,7 +83,26 @@ void DRAWSEGMENT::Flip( const wxPoint& aCentre )
 }
 
 
-wxPoint DRAWSEGMENT::GetStart() const
+const wxPoint DRAWSEGMENT::GetArcEnd() const
+{
+    wxPoint endPoint;         // start of arc
+
+    switch( m_Shape )
+    {
+    case S_ARC:
+        // rotate the starting point of the arc, given by m_End, through the
+        // angle m_Angle to get the ending point of the arc.
+        // m_Start is the arc centre
+        endPoint  = m_End;         // m_End = start point of arc
+        RotatePoint( &endPoint, m_Start, -m_Angle );
+    }
+
+    return endPoint;   // after rotation, the end of the arc.
+}
+
+
+/* use GetArcStart() now
+const wxPoint DRAWSEGMENT::GetStart() const
 {
     switch( m_Shape )
     {
@@ -88,7 +116,7 @@ wxPoint DRAWSEGMENT::GetStart() const
 }
 
 
-wxPoint DRAWSEGMENT::GetEnd() const
+const wxPoint DRAWSEGMENT::GetEnd() const
 {
     wxPoint endPoint;         // start of arc
 
@@ -108,6 +136,7 @@ wxPoint DRAWSEGMENT::GetEnd() const
         return m_End;
     }
 }
+*/
 
 
 void DRAWSEGMENT::SetAngle( double aAngle )

pcbnew/class_drawsegment.h

@@ -18,35 +18,33 @@ class MODULE;
 
 class DRAWSEGMENT : public BOARD_ITEM
 {
-public:
-    int     m_Width;            // thickness of lines ...
-    wxPoint m_Start;            // Line start point or Circle and Arc center
-    wxPoint m_End;              // Line end point or circle and arc start point
+protected:
+    int     m_Width;            ///< thickness of lines ...
+    wxPoint m_Start;            ///< Line start point or Circle and Arc center
+    wxPoint m_End;              ///< Line end point or circle and arc start point
 
-    int     m_Shape;            // Shape: line, Circle, Arc
-    int     m_Type;             // Used in complex associations ( Dimensions.. )
-    int     m_Angle;            // Used only for Arcs: Arc angle in 1/10 deg
-    wxPoint m_BezierC1;         // Bezier Control Point 1
-    wxPoint m_BezierC2;         // Bezier Control Point 1
+    int     m_Shape;            ///< Shape: line, Circle, Arc
+    int     m_Type;             ///< Used in complex associations ( Dimensions.. )
+    double  m_Angle;            ///< Used only for Arcs: Arc angle in 1/10 deg
+    wxPoint m_BezierC1;         ///< Bezier Control Point 1
+    wxPoint m_BezierC2;         ///< Bezier Control Point 1
 
-protected:
     std::vector<wxPoint>    m_BezierPoints;
     std::vector<wxPoint>    m_PolyPoints;
 
 public:
-    DRAWSEGMENT( BOARD_ITEM* aParent, KICAD_T idtype = PCB_LINE_T );
+    DRAWSEGMENT( BOARD_ITEM* aParent = NULL, KICAD_T idtype = PCB_LINE_T );
     ~DRAWSEGMENT();
 
+    /// skip the linked list stuff, and parent
+    const DRAWSEGMENT& operator = ( const DRAWSEGMENT& rhs );
+
     DRAWSEGMENT* Next() const { return (DRAWSEGMENT*) Pnext; }
     DRAWSEGMENT* Back() const { return (DRAWSEGMENT*) Pback; }
 
     void SetWidth( int aWidth )             { m_Width = aWidth; }
     int GetWidth() const                    { return m_Width; }
 
-    void SetStart( const wxPoint& aStart ) { m_Start = aStart; }
-
-    void SetEnd( const wxPoint& aEnd ) { m_End = aEnd; }
-
     /**
      * Function SetAngle
      * sets the angle for arcs, and normalizes it within the range 0 - 360 degrees.
@@ -56,37 +54,44 @@ public:
     double GetAngle() const { return m_Angle; }
 
     void SetType( int aType )               { m_Type = aType; }
+    int GetType() const                     { return m_Type; }
 
     void SetShape( int aShape )             { m_Shape = aShape; }
     int GetShape() const                    { return m_Shape; }
 
     void SetBezControl1( const wxPoint& aPoint )    { m_BezierC1 = aPoint; }
-    void SetBezControl2( const wxPoint& aPoint ) { m_BezierC2 = aPoint; }
+    const wxPoint& GetBezControl1() const           { return m_BezierC1; }
 
-    /**
-     * Function GetPosition
-     * returns the position of this object.
-     * Required by pure virtual BOARD_ITEM::GetPosition()
-     * @return const wxPoint - The position of this object.
-     */
-    const wxPoint GetPosition() const
-    {
-        return m_Start;
-    }
+    void SetBezControl2( const wxPoint& aPoint )    { m_BezierC2 = aPoint; }
+    const wxPoint& GetBezControl2() const           { return m_BezierC2; }
 
-    void SetPosition( const wxPoint& aPos ) { m_Start = aPos; }
+    void SetPosition( const wxPoint& aPos ) { m_Start = aPos; }     // override
+    const wxPoint GetPosition() const       { return m_Start; }     // override
 
     /**
      * Function GetStart
      * returns the starting point of the graphic
      */
-    wxPoint      GetStart() const;
+    const wxPoint& GetStart() const         { return m_Start; }
+    void SetStart( const wxPoint& aStart )  { m_Start = aStart; }
+    void SetStartY( int y )                 { m_Start.y = y; }
+    void SetStartX( int x )                 { m_Start.x = x; }
 
     /**
      * Function GetEnd
      * returns the ending point of the graphic
      */
-    wxPoint      GetEnd() const;
+    const wxPoint& GetEnd() const           { return m_End; }
+    void SetEnd( const wxPoint& aEnd )      { m_End = aEnd; }
+    void SetEndY( int y )                   { m_End.y = y; }
+    void SetEndX( int x )                   { m_End.x = x; }
+
+    // Arc attributes are read only, since they are "calculated" from
+    // m_Start, m_End, and m_Angle.  No Set...() functions.
+
+    const wxPoint& GetCenter() const        { return m_Start; }
+    const wxPoint& GetArcStart() const      { return m_End; }
+    const wxPoint GetArcEnd() const;
 
     /**
      * Function GetRadius
@@ -132,7 +137,6 @@ public:
 
     void         Copy( DRAWSEGMENT* source );
 
-
     void         Draw( EDA_DRAW_PANEL* panel, wxDC* DC,
                        int aDrawMode, const wxPoint& aOffset = ZeroOffset );
 
@@ -145,7 +149,6 @@ public:
      */
     virtual void DisplayInfo( EDA_DRAW_FRAME* frame );
 
-
     /**
      * Function GetBoundingBox
      * returns the orthogonal, bounding box of this object for display purposes.
@@ -155,7 +158,6 @@ public:
      */
     virtual EDA_RECT GetBoundingBox() const;
 
-
     /**
      * Function HitTest
      * tests if the given wxPoint is within the bounds of this object.
@@ -183,7 +185,6 @@ public:
         return wxT( "DRAWSEGMENT" );
     }
 
-
     /**
      * Function GetLength
      * returns the length of the track using the hypotenuse calculation.
@@ -196,7 +197,6 @@ public:
         return hypot( double( delta.x ), double( delta.y ) );
     }
 
-
     /**
      * Function Move
      * move this object.
@@ -208,14 +208,13 @@ public:
         m_End   += aMoveVector;
     }
 
-
     /**
      * Function Rotate
      * Rotate this object.
      * @param aRotCentre - the rotation point.
      * @param aAngle - the rotation angle in 0.1 degree.
      */
-    virtual void Rotate( const wxPoint& aRotCentre, int aAngle );
+    virtual void Rotate( const wxPoint& aRotCentre, double aAngle );
 
     /**
      * Function Flip

pcbnew/class_edge_mod.h

@@ -3,8 +3,8 @@
  * @brief EDGE_MODULE class definition.
  */
 
-#ifndef _CLASS_EDGE_MOD_H_
-#define _CLASS_EDGE_MOD_H_
+#ifndef CLASS_EDGE_MOD_H_
+#define CLASS_EDGE_MOD_H_
 
 
 #include "class_drawsegment.h"
@@ -31,6 +31,12 @@ public:
 
     void Copy( EDGE_MODULE* source );           // copy structure
 
+    void SetStart0( const wxPoint& aPoint )     { m_Start0 = aPoint; }
+    const wxPoint& GetStart0() const            { return m_Start0; }
+
+    void SetEnd0( const wxPoint& aPoint )       { m_End0 = aPoint; }
+    const wxPoint& GetEnd0() const              { return m_End0; }
+
     /**
      * Function Save
      * writes the data structures for this object out to a FILE in "*.brd" format.
@@ -88,4 +94,4 @@ public:
 #endif
 };
 
-#endif    // _CLASS_EDGE_MOD_H_
+#endif    // CLASS_EDGE_MOD_H_

pcbnew/class_marker_pcb.cpp

@@ -80,25 +80,12 @@ void MARKER_PCB::DisplayInfo( EDA_DRAW_FRAME* frame )
 }
 
 
-/**
- * Function Rotate
- * Rotate this object.
- * @param aRotCentre - the rotation point.
- * @param aAngle - the rotation angle in 0.1 degree.
- */
-void MARKER_PCB::Rotate(const wxPoint& aRotCentre, int aAngle)
+void MARKER_PCB::Rotate(const wxPoint& aRotCentre, double aAngle)
 {
     RotatePoint( &m_Pos, aRotCentre, aAngle );
 }
 
 
-/**
- * Function Flip
- * Flip this object, i.e. change the board side for this object
- * this function has not really sense for a marker.
- * It moves just the marker to keep its position on board, when the board is flipped
- * @param aCentre - the rotation point.
- */
 void MARKER_PCB::Flip(const wxPoint& aCentre )
 {
     m_Pos.y  = aCentre.y - (m_Pos.y - aCentre.y);

pcbnew/class_marker_pcb.h

@@ -59,7 +59,7 @@ public:
      * @param aRotCentre - the rotation point.
      * @param aAngle - the rotation angle in 0.1 degree.
      */
-    virtual void Rotate( const wxPoint& aRotCentre, int aAngle );
+    virtual void Rotate( const wxPoint& aRotCentre, double aAngle );
 
     /**
      * Function Flip

pcbnew/class_mire.cpp

@@ -43,6 +43,15 @@ PCB_TARGET::~PCB_TARGET()
 }
 
 
+void PCB_TARGET::Exchg( PCB_TARGET* source )
+{
+    EXCHG( m_Pos,   source->m_Pos );
+    EXCHG( m_Width, source->m_Width );
+    EXCHG( m_Size,  source->m_Size );
+    EXCHG( m_Shape, source->m_Shape );
+}
+
+
 void PCB_TARGET::Copy( PCB_TARGET* source )
 {
     m_Layer     = source->m_Layer;
@@ -143,12 +152,6 @@ bool PCB_TARGET::HitTest( const wxPoint& refPos )
 }
 
 
-/**
- * Function HitTest (overlayed)
- * tests if the given EDA_RECT intersect this object.
- * @param refArea : the given EDA_RECT
- * @return bool - true if a hit, else false
- */
 bool PCB_TARGET::HitTest( EDA_RECT& refArea )
 {
     if( refArea.Contains( m_Pos ) )
@@ -158,23 +161,12 @@ bool PCB_TARGET::HitTest( EDA_RECT& refArea )
 }
 
 
-/**
- * Function Rotate
- * Rotate this object.
- * @param aRotCentre - the rotation point.
- * @param aAngle - the rotation angle in 0.1 degree.
- */
-void PCB_TARGET::Rotate(const wxPoint& aRotCentre, int aAngle)
+void PCB_TARGET::Rotate(const wxPoint& aRotCentre, double aAngle)
 {
     RotatePoint( &m_Pos, aRotCentre, aAngle );
 }
 
 
-/**
- * Function Flip
- * Flip this object, i.e. change the board side for this object
- * @param aCentre - the rotation point.
- */
 void PCB_TARGET::Flip(const wxPoint& aCentre )
 {
     m_Pos.y  = aCentre.y - ( m_Pos.y - aCentre.y );

pcbnew/class_mire.h

@@ -17,11 +17,10 @@ class EDA_DRAW_PANEL;
 
 class PCB_TARGET : public BOARD_ITEM
 {
-public:
-    int     m_Width;
-    wxPoint m_Pos;
     int     m_Shape;            // bit 0 : 0 = draw +, 1 = draw X
     int     m_Size;
+    int     m_Width;
+    wxPoint m_Pos;
 
 public:
     PCB_TARGET( BOARD_ITEM* aParent );
@@ -33,12 +32,23 @@ public:
     PCB_TARGET* Next() const { return (PCB_TARGET*) Pnext; }
     PCB_TARGET* Back() const { return (PCB_TARGET*) Pnext; }
 
-    const wxPoint GetPosition() const
-    {
-        return m_Pos;
-    }
+    void SetPosition( const wxPoint& aPos ) { m_Pos = aPos; }   // override
+    const wxPoint GetPosition() const       { return m_Pos; }   // override
 
-    void SetPosition( const wxPoint& aPos ) { m_Pos = aPos; }
+    void SetShape( int aShape )     { m_Shape = aShape; }
+    int GetShape() const            { return m_Shape; }
+
+    void SetSize( int aSize )       { m_Size = aSize; }
+    int GetSize() const             { return m_Size; }
+
+    void SetWidth( int aWidth )     { m_Width = aWidth; }
+    int GetWidth() const            { return m_Width; }
+
+    /**
+     * Function Exchg
+     * swaps data with another PCB_TARGET for use by undo-redo.
+     */
+    void Exchg( PCB_TARGET* aTarget );
 
     /**
      * Function Move
@@ -56,7 +66,7 @@ public:
      * @param aRotCentre - the rotation point.
      * @param aAngle - the rotation angle in 0.1 degree.
      */
-    virtual void Rotate( const wxPoint& aRotCentre, int aAngle );
+    virtual void Rotate( const wxPoint& aRotCentre, double aAngle );
 
     /**
      * Function Flip
@@ -80,7 +90,6 @@ public:
     void Draw( EDA_DRAW_PANEL* panel, wxDC* DC, int aDrawMode,
                const wxPoint& offset = ZeroOffset );
 
-
     /**
      * Function HitTest
      * tests if the given wxPoint is within the bounds of this object.

pcbnew/class_module.h

@@ -43,7 +43,7 @@ class MODULE : public BOARD_ITEM
 {
 
 public:
-    int               m_Orient;        // orientation in 0.1 degrees
+    double            m_Orient;        // orientation in 0.1 degrees
     wxPoint           m_Pos;           // Real coord on board
     DLIST<D_PAD>      m_Pads;          /* Pad list (linked list) */
     DLIST<BOARD_ITEM> m_Drawings;      /* Graphic items list (linked list) */
@@ -142,15 +142,11 @@ public:
      */
     EDA_RECT GetBoundingBox() const;
 
-    const wxPoint GetPosition() const   // overload
-    {
-        return m_Pos;
-    }
-
     void SetPosition( const wxPoint& aPos );                    // overload
+    const wxPoint GetPosition() const       { return m_Pos; }   // overload
 
-    void SetOrientation( int newangle );
-    int GetOrientation() const { return m_Orient; }
+    void SetOrientation( double newangle );
+    double GetOrientation() const { return m_Orient; }
 
     const wxString& GetLibRef() const { return m_LibRef; }
     void SetLibRef( const wxString& aLibRef ) { m_LibRef = aLibRef; }
@@ -192,7 +188,7 @@ public:
      * @param aRotCentre - the rotation point.
      * @param aAngle - the rotation angle in 0.1 degree.
      */
-    virtual void Rotate( const wxPoint& aRotCentre, int aAngle );
+    virtual void Rotate( const wxPoint& aRotCentre, double aAngle );
 
     /**
      * Function Flip

pcbnew/class_module_transform_functions.cpp

@@ -127,25 +127,14 @@ int ChangeSideMaskLayer( int aMask )
 }
 
 
-/**
- * Function Move (virtual)
- * move this object.
- * @param aMoveVector - the move vector for this object.
- */
-void MODULE::Move(const wxPoint& aMoveVector)
+void MODULE::Move( const wxPoint& aMoveVector )
 {
     wxPoint newpos = m_Pos + aMoveVector;
     SetPosition( newpos );
 }
 
 
-/**
- * Function Rotate
- * Rotate this object.
- * @param aRotCentre - the rotation point.
- * @param aAngle - the rotation angle in 0.1 degree.
- */
-void MODULE::Rotate(const wxPoint& aRotCentre, int aAngle)
+void MODULE::Rotate( const wxPoint& aRotCentre, double aAngle )
 {
     wxPoint newpos = m_Pos;
     RotatePoint( &newpos, aRotCentre, aAngle );
@@ -154,48 +143,42 @@ void MODULE::Rotate(const wxPoint& aRotCentre, int aAngle)
 }
 
 
-/**
- * Function Flip
- * Flip this object, i.e. change the board side for this object
- * @param aCentre - the rotation point.
- */
 void MODULE::Flip( const wxPoint& aCentre )
 {
-    D_PAD*        pt_pad;
     TEXTE_MODULE* pt_texte;
-    EDGE_MODULE*  pt_edgmod;
-    EDA_ITEM*     PtStruct;
 
     // Move module to its final position:
     wxPoint finalPos = m_Pos;
+
     finalPos.y  = aCentre.y - ( finalPos.y - aCentre.y );     /// Mirror the Y position
-    SetPosition(finalPos);
 
-    /* Flip layer */
+    SetPosition( finalPos );
+
+    // Flip layer
     SetLayer( ChangeSideNumLayer( GetLayer() ) );
 
-    /* Reverse mirror orientation. */
+    // Reverse mirror orientation.
     NEGATE( m_Orient );
     NORMALIZE_ANGLE_POS( m_Orient );
 
-    /* Mirror inversion layers pads. */
-    pt_pad = m_Pads;
-
-    for( ; pt_pad != NULL; pt_pad = pt_pad->Next() )
+    // Mirror inversion layers pads.
+    for( D_PAD* pad = m_Pads;  pad;  pad = pad->Next() )
     {
-        pt_pad->m_Pos.y      -= m_Pos.y;
-        pt_pad->m_Pos.y       = -pt_pad->m_Pos.y;
-        pt_pad->m_Pos.y      += m_Pos.y;
-        NEGATE( pt_pad->m_Pos0.y );
-        NEGATE( pt_pad->m_Offset.y );
-        NEGATE( pt_pad->m_DeltaSize.y );
-        NEGATE_AND_NORMALIZE_ANGLE_POS( pt_pad->m_Orient );
-
-        /* flip pads layers*/
-        pt_pad->m_layerMask = ChangeSideMaskLayer( pt_pad->m_layerMask );
+        pad->m_Pos.y  -= m_Pos.y;
+        pad->m_Pos.y   = -pad->m_Pos.y;
+        pad->m_Pos.y  += m_Pos.y;
+
+        NEGATE( pad->m_Pos0.y );
+        NEGATE( pad->m_Offset.y );
+        NEGATE( pad->m_DeltaSize.y );
+
+        NEGATE_AND_NORMALIZE_ANGLE_POS( pad->m_Orient );
+
+        // flip pads layers
+        pad->m_layerMask = ChangeSideMaskLayer( pad->m_layerMask );
     }
 
-    /* Mirror reference. */
+    // Mirror reference.
     pt_texte = m_Reference;
     pt_texte->m_Pos.y -= m_Pos.y;
     pt_texte->m_Pos.y  = -pt_texte->m_Pos.y;
@@ -216,7 +199,7 @@ void MODULE::Flip( const wxPoint& aCentre )
        || (GetLayer() == ADHESIVE_N_BACK) || (GetLayer() == LAYER_N_BACK) )
         pt_texte->m_Mirror = true;
 
-    /* Mirror value. */
+    // Mirror value.
     pt_texte = m_Value;
     pt_texte->m_Pos.y -= m_Pos.y;
     NEGATE( pt_texte->m_Pos.y );
@@ -237,33 +220,42 @@ void MODULE::Flip( const wxPoint& aCentre )
        || (GetLayer() == ADHESIVE_N_BACK) || (GetLayer() == LAYER_N_BACK) )
         pt_texte->m_Mirror = true;
 
-    /* Reverse mirror footprints. */
-    PtStruct = m_Drawings;
-    for( ; PtStruct != NULL; PtStruct = PtStruct->Next() )
+    // Reverse mirror module graphics and texts.
+    for( EDA_ITEM* item = m_Drawings;  item;  item = item->Next() )
     {
-        switch( PtStruct->Type() )
+        switch( item->Type() )
         {
         case PCB_MODULE_EDGE_T:
-            pt_edgmod = (EDGE_MODULE*) PtStruct;
-            pt_edgmod->m_Start.y -= m_Pos.y;
-            pt_edgmod->m_Start.y  = -pt_edgmod->m_Start.y;
-            pt_edgmod->m_Start.y += m_Pos.y;
-            pt_edgmod->m_End.y   -= m_Pos.y;
-            pt_edgmod->m_End.y    = -pt_edgmod->m_End.y;
-            pt_edgmod->m_End.y   += m_Pos.y;
-            NEGATE( pt_edgmod->m_Start0.y );
-            NEGATE( pt_edgmod->m_End0.y );
-            if( pt_edgmod->m_Shape == S_ARC )
             {
-                NEGATE(pt_edgmod->m_Angle);
+                EDGE_MODULE*  em = (EDGE_MODULE*) item;
+
+                wxPoint s = em->GetStart();
+                s.y -= m_Pos.y;
+                s.y  = -s.y;
+                s.y += m_Pos.y;
+                em->SetStart( s );
+
+                wxPoint e = em->GetEnd();
+                e.y -= m_Pos.y;
+                e.y  = -e.y;
+                e.y += m_Pos.y;
+                em->SetEnd( e );
+
+                NEGATE( em->m_Start0.y );
+                NEGATE( em->m_End0.y );
+
+                if( em->GetShape() == S_ARC )
+                {
+                    em->SetAngle( -em->GetAngle() );
                 }
 
-            pt_edgmod->SetLayer( ChangeSideNumLayer( pt_edgmod->GetLayer() ) );
+                em->SetLayer( ChangeSideNumLayer( em->GetLayer() ) );
+            }
             break;
 
         case PCB_MODULE_TEXT_T:
-            /* Reverse mirror position and mirror. */
-            pt_texte = (TEXTE_MODULE*) PtStruct;
+            // Reverse mirror position and mirror.
+            pt_texte = (TEXTE_MODULE*) item;
             pt_texte->m_Pos.y -= m_Pos.y;
             pt_texte->m_Pos.y  = -pt_texte->m_Pos.y;
             pt_texte->m_Pos.y += m_Pos.y;
@@ -298,6 +290,7 @@ void MODULE::Flip( const wxPoint& aCentre )
     CalculateBoundingBox();
 }
 
+
 void MODULE::SetPosition( const wxPoint& newpos )
 {
     wxPoint delta = newpos - m_Pos;
@@ -311,22 +304,20 @@ void MODULE::SetPosition( const wxPoint& newpos )
         pad->m_Pos += delta;
     }
 
-    EDA_ITEM* PtStruct = m_Drawings;
-
-    for( ; PtStruct != NULL; PtStruct = PtStruct->Next() )
+    for( EDA_ITEM* item = m_Drawings;  item;  item = item->Next() )
     {
-        switch( PtStruct->Type() )
+        switch( item->Type() )
         {
         case PCB_MODULE_EDGE_T:
         {
-            EDGE_MODULE* pt_edgmod = (EDGE_MODULE*) PtStruct;
+            EDGE_MODULE* pt_edgmod = (EDGE_MODULE*) item;
             pt_edgmod->SetDrawCoord();
             break;
         }
 
         case PCB_MODULE_TEXT_T:
         {
-            TEXTE_MODULE* pt_texte = (TEXTE_MODULE*) PtStruct;
+            TEXTE_MODULE* pt_texte = (TEXTE_MODULE*) item;
             pt_texte->m_Pos += delta;
             break;
         }
@@ -341,13 +332,14 @@ void MODULE::SetPosition( const wxPoint& newpos )
 }
 
 
-void MODULE::SetOrientation( int newangle )
+void MODULE::SetOrientation( double newangle )
 {
     int px, py;
 
     newangle -= m_Orient;       // = Change in rotation
 
     m_Orient += newangle;
+
     NORMALIZE_ANGLE_POS( m_Orient );
 
     for( D_PAD* pad = m_Pads;  pad;  pad = pad->Next() )
@@ -355,7 +347,7 @@ void MODULE::SetOrientation( int newangle )
         px = pad->m_Pos0.x;
         py = pad->m_Pos0.y;
 
-        pad->m_Orient += newangle; /* change m_Orientation */
+        pad->m_Orient += newangle;  // change m_Orientation
         NORMALIZE_ANGLE_POS( pad->m_Orient );
 
         RotatePoint( &px, &py, m_Orient );
@@ -363,11 +355,11 @@ void MODULE::SetOrientation( int newangle )
         pad->m_Pos.y = m_Pos.y + py;
     }
 
-    /* Update of the reference and value. */
+    // Update of the reference and value.
     m_Reference->SetDrawCoord();
     m_Value->SetDrawCoord();
 
-    /* Displace contours and text of the footprint. */
+    // Displace contours and text of the footprint.
     for( BOARD_ITEM* item = m_Drawings;  item;  item = item->Next() )
     {
         if( item->Type() == PCB_MODULE_EDGE_T )
@@ -376,7 +368,7 @@ void MODULE::SetOrientation( int newangle )
             pt_edgmod->SetDrawCoord();
         }
 
-        if( item->Type() == PCB_MODULE_TEXT_T )
+        else if( item->Type() == PCB_MODULE_TEXT_T )
         {
             TEXTE_MODULE* pt_texte = (TEXTE_MODULE*) item;
             pt_texte->SetDrawCoord();

pcbnew/class_pcb_text.cpp

@@ -56,12 +56,6 @@ void TEXTE_PCB::Copy( TEXTE_PCB* source )
 }
 
 
-/*
- * Function Draw
- * Like tracks, texts are drawn in filled or sketch mode, never in line mode
- * because the line mode does not keep the actual size of the text
- * and the actual size is very important, especially for copper texts
- */
 void TEXTE_PCB::Draw( EDA_DRAW_PANEL* panel, wxDC* DC,
                       int DrawMode, const wxPoint& offset )
 {
@@ -85,7 +79,6 @@ void TEXTE_PCB::Draw( EDA_DRAW_PANEL* panel, wxDC* DC,
 }
 
 
-// see class_pcb_text.h
 void TEXTE_PCB::DisplayInfo( EDA_DRAW_FRAME* frame )
 {
     wxString    msg;
@@ -130,13 +123,7 @@ void TEXTE_PCB::DisplayInfo( EDA_DRAW_FRAME* frame )
 }
 
 
-/**
- * Function Rotate
- * Rotate this object.
- * @param aRotCentre - the rotation point.
- * @param aAngle - the rotation angle in 0.1 degree.
- */
-void TEXTE_PCB::Rotate(const wxPoint& aRotCentre, int aAngle)
+void TEXTE_PCB::Rotate( const wxPoint& aRotCentre, double aAngle )
 {
     RotatePoint( &m_Pos, aRotCentre, aAngle );
     m_Orient += aAngle;
@@ -144,11 +131,6 @@ void TEXTE_PCB::Rotate(const wxPoint& aRotCentre, int aAngle)
 }
 
 
-/**
- * Function Flip
- * Flip this object, i.e. change the board side for this object
- * @param aCentre - the rotation point.
- */
 void TEXTE_PCB::Flip(const wxPoint& aCentre )
 {
     m_Pos.y  = aCentre.y - ( m_Pos.y - aCentre.y );

pcbnew/class_pcb_text.h

@@ -47,7 +47,7 @@ public:
      * @param aRotCentre - the rotation point.
      * @param aAngle - the rotation angle in 0.1 degree.
      */
-    virtual void Rotate( const wxPoint& aRotCentre, int aAngle );
+    virtual void Rotate( const wxPoint& aRotCentre, double aAngle );
 
     /**
      * Function Flip

pcbnew/class_track.cpp

@@ -186,7 +186,7 @@ wxString SEGVIA::GetSelectMenuText() const
 
     text << _( "Via" ) << wxT( " " ) << ShowWidth();
 
-    int shape = Shape();
+    int shape = GetShape();
 
     if( shape == VIA_BLIND_BURIED )
         text << wxT( " " ) << _( "Blind/Buried" );
@@ -231,7 +231,7 @@ TRACK::TRACK( const TRACK& Source ) :
 
     m_Flags     = Source.m_Flags;
     SetTimeStamp( Source.m_TimeStamp );
-    SetStatus( Source.ReturnStatus() );
+    SetStatus( Source.GetStatus() );
     m_Start = Source.m_Start;
     m_End   = Source.m_End;
     m_Width = Source.m_Width;
@@ -390,7 +390,7 @@ EDA_RECT TRACK::GetBoundingBox() const
 }
 
 
-void TRACK::Rotate( const wxPoint& aRotCentre, int aAngle )
+void TRACK::Rotate( const wxPoint& aRotCentre, double aAngle )
 {
     RotatePoint( &m_Start, aRotCentre, aAngle );
     RotatePoint( &m_End, aRotCentre, aAngle );
@@ -451,7 +451,7 @@ int TRACK::ReturnMaskLayer() const
 {
     if( Type() == PCB_VIA_T )
     {
-        int via_type = Shape();
+        int via_type = GetShape();
 
         if( via_type == VIA_THROUGH )
             return ALL_CU_LAYERS;
@@ -481,7 +481,7 @@ int TRACK::ReturnMaskLayer() const
 
 void SEGVIA::SetLayerPair( int top_layer, int bottom_layer )
 {
-    if( Shape() == VIA_THROUGH )
+    if( GetShape() == VIA_THROUGH )
     {
         top_layer    = LAYER_N_FRONT;
         bottom_layer = LAYER_N_BACK;
@@ -499,7 +499,7 @@ void SEGVIA::ReturnLayerPair( int* top_layer, int* bottom_layer ) const
     int b_layer = LAYER_N_BACK;
     int t_layer = LAYER_N_FRONT;
 
-    if( Shape() != VIA_THROUGH )
+    if( GetShape() != VIA_THROUGH )
     {
         b_layer = (m_Layer >> 4) & 15;
         t_layer = m_Layer & 15;
@@ -888,7 +888,7 @@ void SEGVIA::Draw( EDA_DRAW_PANEL* panel, wxDC* DC, int draw_mode, const wxPoint
 
     // for Micro Vias, draw a partial cross : X on component layer, or + on copper layer
     // (so we can see 2 superimposed microvias ):
-    if( Shape() == VIA_MICROVIA )
+    if( GetShape() == VIA_MICROVIA )
     {
         int ax, ay, bx, by;
 
@@ -926,7 +926,7 @@ void SEGVIA::Draw( EDA_DRAW_PANEL* panel, wxDC* DC, int draw_mode, const wxPoint
 
     // for Buried Vias, draw a partial line : orient depending on layer pair
     // (so we can see superimposed buried vias ):
-    if( Shape() == VIA_BLIND_BURIED )
+    if( GetShape() == VIA_BLIND_BURIED )
     {
         int ax = 0, ay = radius, bx = 0, by = drill_radius;
         int layer_top, layer_bottom;
@@ -1041,7 +1041,7 @@ void TRACK::DisplayInfoBase( EDA_DRAW_FRAME* frame )
     switch( Type() )
     {
     case PCB_VIA_T:
-        switch( Shape() )
+        switch( GetShape() )
         {
             default:
             case 0:
@@ -1593,7 +1593,7 @@ void SEGVIA::Show( int nestLevel, std::ostream& os )
 {
     const char* cp;
 
-    switch( Shape() )
+    switch( GetShape() )
     {
     case VIA_THROUGH:
         cp = "through";

pcbnew/class_track.h

@@ -65,7 +65,7 @@ public:
     BOARD_CONNECTED_ITEM* start;    // pointers to a connected item (pad or track)
     BOARD_CONNECTED_ITEM* end;
 
-    int         m_Param;            // Auxiliary variable ( used in some computations )
+    double      m_Param;            // Auxiliary variable ( used in some computations )
 
 protected:
     TRACK( const TRACK& track );    // protected so Copy() is used instead.
@@ -108,7 +108,7 @@ public:
      * @param aRotCentre - the rotation point.
      * @param aAngle - the rotation angle in 0.1 degree.
      */
-    virtual void Rotate( const wxPoint& aRotCentre, int aAngle );
+    virtual void Rotate( const wxPoint& aRotCentre, double aAngle );
 
     /**
      * Function Flip
@@ -117,17 +117,17 @@ public:
      */
     virtual void Flip( const wxPoint& aCentre );
 
-    const wxPoint GetPosition() const       // overload
-    {
-        return m_Start;  // it had to be start or end.
-    }
+    void SetPosition( const wxPoint& aPos )     { m_Start = aPos; }     // overload
+    const wxPoint GetPosition() const           { return m_Start; }     // overload
 
-    int GetWidth() const { return m_Width; }
     void SetWidth( int aWidth )                 { m_Width = aWidth; }
-
-    void SetPosition( const wxPoint& aPos ) {  m_Start = aPos; }    // overload
+    int GetWidth() const                        { return m_Width; }
 
     void SetEnd( const wxPoint& aEnd )          { m_End = aEnd; }
+    const wxPoint& GetEnd() const               { return m_End; }
+
+    void SetStart( const wxPoint& aStart )      { m_Start = aStart; }
+    const wxPoint& GetStart() const             { return m_Start; }
 
     EDA_RECT GetBoundingBox() const;
 
@@ -166,8 +166,8 @@ public:
      */
     double GetLength() const
     {
-        int dx = m_Start.x - m_End.x;
-        int dy = m_Start.y - m_End.y;
+        double dx = m_Start.x - m_End.x;
+        double dy = m_Start.y - m_End.y;
 
         return hypot( dx, dy );
     }
@@ -177,7 +177,7 @@ public:
                const wxPoint& aOffset = ZeroOffset );
 
     /* divers */
-    int Shape() const { return m_Shape & 0xFF; }
+    int GetShape() const { return m_Shape & 0xFF; }
     void SetShape( int aShape ) { m_Shape = aShape; }
 
     /**
@@ -201,26 +201,34 @@ public:
      * Set the drill value for vias
      * @param drill_value = new drill value
     */
-    void SetDrillValue( int drill_value ) { m_Drill = drill_value; }
+    void SetDrill( int aDrill )             { m_Drill = aDrill; }
+
+    /**
+     * Function GetDrill
+     * returns the local drill setting for this VIA.  If you want the calculated value,
+     * use GetDrillValue() instead.
+     */
+    int GetDrill() const                    { return m_Drill; }
+
+    /**
+     * Function GetDrillValue
+     * "calculates" the drill value for vias (m-Drill if > 0, or default
+     * drill value for the board.
+     * @return real drill_value
+    */
+    int GetDrillValue() const;
 
     /**
      * Function SetDrillDefault
      * Set the drill value for vias at default value (-1)
     */
-    void SetDrillDefault( void ) { m_Drill = -1; }
+    void SetDrillDefault()      { m_Drill = -1; }
 
     /**
      * Function IsDrillDefault
      * @return true if the drill value is default value (-1)
     */
-    bool IsDrillDefault( void ) { return m_Drill <= 0; }
-
-    /**
-     * Function GetDrillValue
-     * calculate the drill value for vias (m-Drill if > 0, or default drill value for the board
-     * @return real drill_value
-    */
-    int GetDrillValue() const;
+    bool IsDrillDefault()       { return m_Drill <= 0; }
 
     /**
      * Function ReturnMaskLayer

pcbnew/class_zone.cpp

@@ -737,7 +737,7 @@ void ZONE_CONTAINER::MoveEdge( const wxPoint& offset )
 }
 
 
-void ZONE_CONTAINER::Rotate( const wxPoint& centre, int angle )
+void ZONE_CONTAINER::Rotate( const wxPoint& centre, double angle )
 {
     wxPoint pos;
 

pcbnew/class_zone.h

@@ -3,8 +3,8 @@
  * @brief Classes to handle copper zones
  */
 
-#ifndef CLASS_ZONE_H
-#define CLASS_ZONE_H
+#ifndef CLASS_ZONE_H_
+#define CLASS_ZONE_H_
 
 
 #include <vector>
@@ -41,7 +41,7 @@ struct SEGMENT
         m_Start = aStart;
         m_End = aEnd;
     }
- };
+};
 
 
 /**
@@ -103,7 +103,6 @@ private:
 
 public:
     ZONE_CONTAINER( BOARD* parent );
-
     ~ZONE_CONTAINER();
 
     bool Save( FILE* aFile ) const;
@@ -224,9 +223,9 @@ public:
     /**
      * Function GetNetName
      * returns the net name.
-     * @return wxString - The net name.
+     * @return const wxString& - The net name.
      */
-    wxString GetNetName() const { return m_Netname; };
+    const wxString& GetNetName() const { return m_Netname; };
     void SetNetName( const wxString& aName ) { m_Netname = aName; }
 
     void SetFillMode( int aFillMode ) { m_FillMode = aFillMode; }
@@ -392,7 +391,7 @@ public:
      * @param centre = rot centre
      * @param angle = in 0.1 degree
      */
-    void Rotate( const wxPoint& centre, int angle );
+    void Rotate( const wxPoint& centre, double angle );
 
     /**
      * Function Flip
@@ -420,10 +419,10 @@ public:
         return wxT( "ZONE_CONTAINER" );
     }
 
-
     /** Access to m_Poly parameters
      */
 
+
     int GetNumCorners( void ) const
     {
         return m_Poly->GetNumCorners();
@@ -500,4 +499,4 @@ public:
 };
 
 
-#endif  // #ifndef CLASS_ZONE_H
+#endif  // CLASS_ZONE_H_

pcbnew/clean.cpp

@@ -147,7 +147,7 @@ void clean_vias( BOARD * aPcb )
 
     for( track = aPcb->m_Track; track; track = track->Next() )
     {
-        if( track->Shape() != VIA_THROUGH )
+        if( track->GetShape() != VIA_THROUGH )
             continue;
 
         // Search and delete others vias at same location

pcbnew/dialogs/dialog_edit_module_for_BoardEditor.cpp

@@ -73,7 +73,7 @@ void DIALOG_MODULE_BOARD_EDITOR::InitBoardProperties()
          (m_CurrentModule->GetLayer() == LAYER_N_BACK) ? 1 : 0 );
 
     bool select = FALSE;
-    switch( m_CurrentModule->m_Orient )
+    switch( (int) m_CurrentModule->GetOrientation() )
     {
     case 0:
         m_OrientCtrl->SetSelection( 0 );

pcbnew/dialogs/dialog_gendrill.cpp

@@ -164,11 +164,11 @@ void DIALOG_GENDRILL::InitDisplayParams( void )
         if( track->Type() != PCB_VIA_T )
             continue;
 
-        if( track->Shape() == VIA_THROUGH )
+        if( track->GetShape() == VIA_THROUGH )
             m_throughViasCount++;
-        else if( track->Shape() == VIA_MICROVIA )
+        else if( track->GetShape() == VIA_MICROVIA )
             m_microViasCount++;
-        else if( track->Shape() == VIA_BLIND_BURIED )
+        else if( track->GetShape() == VIA_BLIND_BURIED )
             m_blindOrBuriedViasCount++;
     }
 

pcbnew/dialogs/dialog_graphic_item_properties.cpp

@@ -90,7 +90,7 @@ void DialogGraphicItemProperties::initDlg( )
     wxString msg;
 
     // Change texts according to the segment shape:
-    switch ( m_Item->m_Shape )
+    switch ( m_Item->GetShape() )
     {
     case S_CIRCLE:
         m_Start_Center_XText->SetLabel(_("Center X"));
@@ -106,7 +106,7 @@ void DialogGraphicItemProperties::initDlg( )
         m_Start_Center_YText->SetLabel(_("Center Y"));
         m_EndX_Radius_Text->SetLabel(_("Start Point X"));
         m_EndY_Text->SetLabel(_("Start Point Y"));
-        msg << m_Item->m_Angle;
+        msg << m_Item->GetAngle();
         m_Angle_Ctrl->SetValue(msg);
         break;
 
@@ -118,23 +118,23 @@ void DialogGraphicItemProperties::initDlg( )
 
     AddUnitSymbol( *m_Start_Center_XText );
 
-    PutValueInLocalUnits( *m_Center_StartXCtrl, m_Item->m_Start.x,
+    PutValueInLocalUnits( *m_Center_StartXCtrl, m_Item->GetStart().x,
         m_Parent->m_InternalUnits );
 
     AddUnitSymbol( *m_Start_Center_YText );
-    PutValueInLocalUnits( *m_Center_StartYCtrl, m_Item->m_Start.y,
+    PutValueInLocalUnits( *m_Center_StartYCtrl, m_Item->GetStart().y,
         m_Parent->m_InternalUnits );
 
     AddUnitSymbol( *m_EndX_Radius_Text );
-    PutValueInLocalUnits( *m_EndX_Radius_Ctrl, m_Item->m_End.x,
+    PutValueInLocalUnits( *m_EndX_Radius_Ctrl, m_Item->GetEnd().x,
         m_Parent->m_InternalUnits );
 
     AddUnitSymbol( *m_EndY_Text );
-    PutValueInLocalUnits( *m_EndY_Ctrl, m_Item->m_End.y,
+    PutValueInLocalUnits( *m_EndY_Ctrl, m_Item->GetEnd().y,
         m_Parent->m_InternalUnits );
 
     AddUnitSymbol( *m_ItemThicknessText );
-    PutValueInLocalUnits( *m_ThicknessCtrl, m_Item->m_Width,
+    PutValueInLocalUnits( *m_ThicknessCtrl, m_Item->GetWidth(),
         m_Parent->m_InternalUnits );
 
     AddUnitSymbol( *m_DefaultThicknessText );
@@ -192,28 +192,22 @@ void DialogGraphicItemProperties::OnOkClick( wxCommandEvent& event )
         m_Item->Draw( m_Parent->DrawPanel, m_DC, GR_XOR );
 
     msg = m_Center_StartXCtrl->GetValue();
-    m_Item->m_Start.x = ReturnValueFromString( g_UserUnit, msg,
-        m_Parent->m_InternalUnits );
+    m_Item->SetStartX( ReturnValueFromString( g_UserUnit, msg, m_Parent->m_InternalUnits ));
 
     msg = m_Center_StartYCtrl->GetValue();
-    m_Item->m_Start.y = ReturnValueFromString( g_UserUnit, msg,
-        m_Parent->m_InternalUnits );
+    m_Item->SetStartY( ReturnValueFromString( g_UserUnit, msg, m_Parent->m_InternalUnits ));
 
     msg = m_EndX_Radius_Ctrl->GetValue();
-    m_Item->m_End.x = ReturnValueFromString( g_UserUnit, msg,
-        m_Parent->m_InternalUnits );
+    m_Item->SetEndX( ReturnValueFromString( g_UserUnit, msg, m_Parent->m_InternalUnits ));
 
     msg = m_EndY_Ctrl->GetValue();
-    m_Item->m_End.y = ReturnValueFromString( g_UserUnit, msg,
-        m_Parent->m_InternalUnits );
+    m_Item->SetEndY( ReturnValueFromString( g_UserUnit, msg, m_Parent->m_InternalUnits ));
 
     msg = m_ThicknessCtrl->GetValue();
-    m_Item->m_Width = ReturnValueFromString( g_UserUnit, msg,
-        m_Parent->m_InternalUnits );
+    m_Item->SetWidth( ReturnValueFromString( g_UserUnit, msg, m_Parent->m_InternalUnits ));
 
     msg = m_DefaultThicknessCtrl->GetValue();
-    int thickness = ReturnValueFromString( g_UserUnit, msg,
-        m_Parent->m_InternalUnits );
+    int thickness = ReturnValueFromString( g_UserUnit, msg, m_Parent->m_InternalUnits );
 
     m_Item->SetLayer( m_LayerSelection->GetCurrentSelection() + FIRST_NO_COPPER_LAYER);
 
@@ -222,12 +216,12 @@ void DialogGraphicItemProperties::OnOkClick( wxCommandEvent& event )
     else
          m_BrdSettings.m_DrawSegmentWidth = thickness;
 
-    if( m_Item->m_Shape == S_ARC )
+    if( m_Item->GetShape() == S_ARC )
     {
-        long angle;
-        m_Angle_Ctrl->GetValue().ToLong(&angle);
+        double angle;
+        m_Angle_Ctrl->GetValue().ToDouble( &angle );
         NORMALIZE_ANGLE_360(angle);
-        m_Item->m_Angle = angle;
+        m_Item->SetAngle( angle );
     }
 
     m_Parent->OnModify();

pcbnew/dialogs/dialog_pcb_text_properties.cpp

@@ -114,7 +114,7 @@ void DIALOG_PCB_TEXT_PROPERTIES::MyInit()
         }
     }
 
-    switch( m_SelectedPCBText->m_Orient )
+    switch( (int) m_SelectedPCBText->GetOrientation() )
     {
     default:
         m_OrientationCtrl->SetSelection( 0 );

pcbnew/dimension.cpp

@@ -83,18 +83,18 @@ DIALOG_DIMENSION_EDITOR::DIALOG_DIMENSION_EDITOR( PCB_EDIT_FRAME* aParent,
 
     CurrentDimension = aDimension;
 
-    if( aDimension->m_Text->m_Mirror )
+    if( aDimension->m_Text.m_Mirror )
         m_rbMirror->SetSelection( 1 );
     else
         m_rbMirror->SetSelection( 0 );
 
-    m_Name->SetValue( aDimension->m_Text->m_Text );
+    m_Name->SetValue( aDimension->m_Text.m_Text );
 
     // Enter size value in dialog
-    PutValueInLocalUnits( *m_TxtSizeXCtrl, aDimension->m_Text->m_Size.x,
+    PutValueInLocalUnits( *m_TxtSizeXCtrl, aDimension->m_Text.m_Size.x,
                           m_Parent->m_InternalUnits );
     AddUnitSymbol( *m_staticTextSizeX );
-    PutValueInLocalUnits( *m_TxtSizeYCtrl, aDimension->m_Text->m_Size.y,
+    PutValueInLocalUnits( *m_TxtSizeYCtrl, aDimension->m_Text.m_Size.y,
                           m_Parent->m_InternalUnits );
     AddUnitSymbol( *m_staticTextSizeY );
 
@@ -104,10 +104,10 @@ DIALOG_DIMENSION_EDITOR::DIALOG_DIMENSION_EDITOR( PCB_EDIT_FRAME* aParent,
     AddUnitSymbol( *m_staticTextWidth );
 
     // Enter position value in dialog
-    PutValueInLocalUnits( *m_textCtrlPosX, aDimension->m_Text->m_Pos.x,
+    PutValueInLocalUnits( *m_textCtrlPosX, aDimension->m_Text.m_Pos.x,
                           m_Parent->m_InternalUnits );
     AddUnitSymbol( *m_staticTextPosX );
-    PutValueInLocalUnits( *m_textCtrlPosY, aDimension->m_Text->m_Pos.y,
+    PutValueInLocalUnits( *m_textCtrlPosY, aDimension->m_Text.m_Pos.y,
                           m_Parent->m_InternalUnits );
     AddUnitSymbol( *m_staticTextPosY );
 
@@ -148,26 +148,26 @@ void DIALOG_DIMENSION_EDITOR::OnOKClick( wxCommandEvent& event )
 
     // Get new size value:
     msg = m_TxtSizeXCtrl->GetValue();
-    CurrentDimension->m_Text->m_Size.x = ReturnValueFromString( g_UserUnit, msg,
+    CurrentDimension->m_Text.m_Size.x = ReturnValueFromString( g_UserUnit, msg,
                                                                 m_Parent->m_InternalUnits );
     msg = m_TxtSizeYCtrl->GetValue();
-    CurrentDimension->m_Text->m_Size.y = ReturnValueFromString( g_UserUnit, msg,
+    CurrentDimension->m_Text.m_Size.y = ReturnValueFromString( g_UserUnit, msg,
                                                                 m_Parent->m_InternalUnits );
 
     // Get new position value:
     // It will be copied later in dimension, because
     msg = m_textCtrlPosX->GetValue();
-    CurrentDimension->m_Text->m_Pos.x = ReturnValueFromString( g_UserUnit, msg,
+    CurrentDimension->m_Text.m_Pos.x = ReturnValueFromString( g_UserUnit, msg,
                                                                m_Parent->m_InternalUnits );
     msg = m_textCtrlPosY->GetValue();
-    CurrentDimension->m_Text->m_Pos.y = ReturnValueFromString( g_UserUnit, msg,
+    CurrentDimension->m_Text.m_Pos.y = ReturnValueFromString( g_UserUnit, msg,
                                                                m_Parent->m_InternalUnits );
 
     // Get new line thickness value:
     msg = m_TxtWidthCtrl->GetValue();
     int width = ReturnValueFromString( g_UserUnit, msg,
                                        m_Parent->m_InternalUnits );
-    int maxthickness = Clamp_Text_PenSize( width, CurrentDimension->m_Text->m_Size );
+    int maxthickness = Clamp_Text_PenSize( width, CurrentDimension->m_Text.m_Size );
 
     if( width > maxthickness )
     {
@@ -176,9 +176,9 @@ void DIALOG_DIMENSION_EDITOR::OnOKClick( wxCommandEvent& event )
         width = maxthickness;
     }
 
-    CurrentDimension->m_Text->m_Thickness = CurrentDimension->m_Width = width ;
+    CurrentDimension->m_Text.m_Thickness = CurrentDimension->m_Width = width ;
 
-    CurrentDimension->m_Text->m_Mirror = ( m_rbMirror->GetSelection() == 1 ) ? true : false;
+    CurrentDimension->m_Text.m_Mirror = ( m_rbMirror->GetSelection() == 1 ) ? true : false;
 
     CurrentDimension->SetLayer( m_SelLayerBox->GetCurrentSelection() + FIRST_NO_COPPER_LAYER );
 
@@ -249,16 +249,16 @@ DIMENSION* PCB_EDIT_FRAME::EditDimension( DIMENSION* aDimension, wxDC* aDC )
         aDimension->m_arrowD2Ox = aDimension->m_arrowD2Fx = pos.x;
         aDimension->m_arrowD2Oy = aDimension->m_arrowD2Fy = pos.y;
 
-        aDimension->m_Text->m_Size   = GetBoard()->GetDesignSettings().m_PcbTextSize;
+        aDimension->m_Text.m_Size   = GetBoard()->GetDesignSettings().m_PcbTextSize;
         int width = GetBoard()->GetDesignSettings().m_PcbTextWidth;
-        int maxthickness = Clamp_Text_PenSize(width, aDimension->m_Text->m_Size );
+        int maxthickness = Clamp_Text_PenSize(width, aDimension->m_Text.m_Size );
 
         if( width > maxthickness )
         {
             width = maxthickness;
         }
 
-        aDimension->m_Text->m_Thickness = aDimension->m_Width = width ;
+        aDimension->m_Text.m_Thickness = aDimension->m_Width = width ;
 
         aDimension->AdjustDimensionDetails( );
 
@@ -377,13 +377,13 @@ void PCB_EDIT_FRAME::BeginMoveDimensionText( DIMENSION* aItem, wxDC* DC )
         return;
 
     // Store the initial position for undo/abort command
-    initialTextPosition = aItem->m_Text->m_Pos;
+    initialTextPosition = aItem->m_Text.m_Pos;
 
     aItem->Draw( DrawPanel, DC, GR_XOR );
     aItem->m_Flags |= IS_MOVED;
     aItem->DisplayInfo( this );
 
-    GetScreen()->SetCrossHairPosition( aItem->m_Text->m_Pos );
+    GetScreen()->SetCrossHairPosition( aItem->m_Text.m_Pos );
     DrawPanel->MoveCursorToCrossHair();
 
     DrawPanel->SetMouseCapture( MoveDimensionText, AbortMoveDimensionText );
@@ -404,7 +404,7 @@ static void MoveDimensionText( EDA_DRAW_PANEL* aPanel, wxDC* aDC, const wxPoint&
     if( aErase )
         dimension->Draw( aPanel, aDC, GR_XOR );
 
-    dimension->m_Text->m_Pos = aPanel->GetScreen()->GetCrossHairPosition();
+    dimension->m_Text.m_Pos = aPanel->GetScreen()->GetCrossHairPosition();
 
     dimension->Draw( aPanel, aDC, GR_XOR );
 }
@@ -425,7 +425,7 @@ void AbortMoveDimensionText( EDA_DRAW_PANEL* aPanel, wxDC* aDC )
         return;
 
     dimension->Draw( aPanel, aDC, GR_XOR );
-    dimension->m_Text->m_Pos = initialTextPosition;
+    dimension->m_Text.m_Pos = initialTextPosition;
     dimension->m_Flags = 0;
     dimension->Draw( aPanel, aDC, GR_OR );
 }
@@ -444,9 +444,9 @@ void PCB_EDIT_FRAME::PlaceDimensionText( DIMENSION* aItem, wxDC* DC )
     aItem->Draw( DrawPanel, DC, GR_OR );
     OnModify();
 
-    EXCHG( aItem->m_Text->m_Pos, initialTextPosition );
+    EXCHG( aItem->m_Text.m_Pos, initialTextPosition );
     SaveCopyInUndoList( aItem, UR_CHANGED );
-    EXCHG( aItem->m_Text->m_Pos, initialTextPosition );
+    EXCHG( aItem->m_Text.m_Pos, initialTextPosition );
 
     aItem->m_Flags = 0;
 }

pcbnew/drc_clearance_test_functions.cpp

@@ -175,7 +175,7 @@ bool DRC::doTrackDrc( TRACK* aRefSeg, TRACK* aStart, bool testPads )
     if( aRefSeg->Type() == PCB_VIA_T )
     {
         // test if the via size is smaller than minimum
-        if( aRefSeg->Shape() == VIA_MICROVIA )
+        if( aRefSeg->GetShape() == VIA_MICROVIA )
         {
             if( aRefSeg->m_Width < netclass->GetuViaMinDiameter() )
             {
@@ -207,7 +207,7 @@ bool DRC::doTrackDrc( TRACK* aRefSeg, TRACK* aStart, bool testPads )
         // For microvias: test if they are blind vias and only between 2 layers
         // because they are used for very small drill size and are drill by laser
         // and **only one layer** can be drilled
-        if( aRefSeg->Shape() == VIA_MICROVIA )
+        if( aRefSeg->GetShape() == VIA_MICROVIA )
         {
             int  layer1, layer2;
             bool err = true;

pcbnew/edgemod.cpp

@@ -29,7 +29,7 @@ static void Abort_Move_ModuleOutline( EDA_DRAW_PANEL* Panel, wxDC* DC );
 static void ShowCurrentOutlineWhileMoving( EDA_DRAW_PANEL* aPanel, wxDC* aDC,
                                            const wxPoint& aPosition, bool aErase );
 
-int            ArcValue = 900;
+static double  ArcValue = 900;
 static wxPoint MoveVector;              // Move vector for move edge
 static wxPoint CursorInitialPosition;   // Mouse cursor initial position for move command
 
@@ -49,23 +49,25 @@ void FOOTPRINT_EDIT_FRAME::Start_Move_EdgeMod( EDGE_MODULE* Edge, wxDC* DC )
 }
 
 
-void FOOTPRINT_EDIT_FRAME::Place_EdgeMod( EDGE_MODULE* Edge )
+void FOOTPRINT_EDIT_FRAME::Place_EdgeMod( EDGE_MODULE* aEdge )
 {
-    if( Edge == NULL )
+    if( aEdge == NULL )
         return;
 
-    Edge->m_Start -= MoveVector;
-    Edge->m_End   -= MoveVector;
+    aEdge->SetStart( aEdge->GetStart() - MoveVector );
+    aEdge->SetEnd(   aEdge->GetEnd()   - MoveVector );
 
-    Edge->m_Start0 -= MoveVector;
-    Edge->m_End0   -= MoveVector;
+    aEdge->SetStart0( aEdge->GetStart0() - MoveVector );
+    aEdge->SetEnd0(   aEdge->GetEnd0()   - MoveVector );
 
-    Edge->m_Flags = 0;
+    aEdge->m_Flags = 0;
     DrawPanel->SetMouseCapture( NULL, NULL );
     SetCurItem( NULL );
     OnModify();
-    MODULE* Module = (MODULE*) Edge->GetParent();
-    Module->CalculateBoundingBox();
+
+    MODULE* module = (MODULE*) aEdge->GetParent();
+    module->CalculateBoundingBox();
+
     DrawPanel->Refresh( );
 }
 
@@ -109,22 +111,27 @@ static void ShowNewEdgeModule( EDA_DRAW_PANEL* aPanel, wxDC* aDC, const wxPoint&
     if( Edge == NULL )
         return;
 
-    MODULE* Module = (MODULE*) Edge->GetParent();
+    MODULE* module = (MODULE*) Edge->GetParent();
 
     //  if( erase )
     {
         Edge->Draw( aPanel, aDC, GR_XOR );
     }
 
-    Edge->m_End = screen->GetCrossHairPosition();
+    Edge->SetEnd( screen->GetCrossHairPosition() );
+
+    // Update relative coordinate.
+    Edge->SetEnd0( Edge->GetEnd() - module->GetPosition() );
+
+    wxPoint pt( Edge->GetEnd0() );
 
-    /* Update relative coordinate. */
-    Edge->m_End0 = Edge->m_End - Module->m_Pos;
-    RotatePoint( &Edge->m_End0, -Module->m_Orient );
+    RotatePoint( &pt, -module->GetOrientation() );
+
+    Edge->SetEnd0( pt );
 
     Edge->Draw( aPanel, aDC, GR_XOR );
 
-    Module->CalculateBoundingBox();
+    module->CalculateBoundingBox();
 }
 
 
@@ -143,12 +150,12 @@ void FOOTPRINT_EDIT_FRAME::Edit_Edge_Width( EDGE_MODULE* aEdge )
             if( aEdge->Type() != PCB_MODULE_EDGE_T )
                 continue;
 
-            aEdge->m_Width = g_ModuleSegmentWidth;
+            aEdge->SetWidth( g_ModuleSegmentWidth );
         }
     }
     else
     {
-        aEdge->m_Width = g_ModuleSegmentWidth;
+        aEdge->SetWidth( g_ModuleSegmentWidth );
     }
 
     OnModify();
@@ -222,9 +229,9 @@ void FOOTPRINT_EDIT_FRAME::Enter_Edge_Width( EDGE_MODULE* aEdge )
 
     if( aEdge )
     {
-        MODULE* Module = GetBoard()->m_Modules;
-        aEdge->m_Width = g_ModuleSegmentWidth;
-        Module->CalculateBoundingBox();
+        MODULE* module = GetBoard()->m_Modules;
+        aEdge->SetWidth( g_ModuleSegmentWidth );
+        module->CalculateBoundingBox();
         OnModify();
     }
 }
@@ -297,18 +304,18 @@ EDGE_MODULE* FOOTPRINT_EDIT_FRAME::Begin_Edge_Module( EDGE_MODULE* Edge,
         Edge = new EDGE_MODULE( module );
         MoveVector.x = MoveVector.y = 0;
 
-        /* Add the new item to the Drawings list head*/
+        // Add the new item to the Drawings list head
         module->m_Drawings.PushFront( Edge );
 
-        /* Update characteristics of the segment or arc. */
+        // Update characteristics of the segment or arc.
         Edge->m_Flags = IS_NEW;
-        Edge->m_Angle = angle;
-        Edge->m_Shape = type_edge;
+        Edge->SetAngle( angle );
+        Edge->SetShape( type_edge );
 
-        if( Edge->m_Shape == S_ARC )
-            Edge->m_Angle = ArcValue;
+        if( Edge->GetShape() == S_ARC )
+            Edge->SetAngle( ArcValue );
 
-        Edge->m_Width = g_ModuleSegmentWidth;
+        Edge->SetWidth( g_ModuleSegmentWidth );
         Edge->SetLayer( module->GetLayer() );
 
         if( module->GetLayer() == LAYER_N_FRONT )
@@ -317,14 +324,14 @@ EDGE_MODULE* FOOTPRINT_EDIT_FRAME::Begin_Edge_Module( EDGE_MODULE* Edge,
         if( module->GetLayer() == LAYER_N_BACK )
             Edge->SetLayer( SILKSCREEN_N_BACK );
 
-        /* Initialize the starting point of the new segment or arc */
-        Edge->m_Start = GetScreen()->GetCrossHairPosition();
+        // Initialize the starting point of the new segment or arc
+        Edge->SetStart( GetScreen()->GetCrossHairPosition() );
 
-        /* Initialize the ending point of the new segment or arc */
-        Edge->m_End = Edge->m_Start;
+        // Initialize the ending point of the new segment or arc
+        Edge->SetEnd( Edge->GetStart() );
 
-        /* Initialize the relative coordinates */
-        Edge->m_Start0 = Edge->m_Start - module->m_Pos;
+        // Initialize the relative coordinates
+        Edge->SetStart0( Edge->GetStart() - module->GetPosition() );
 
         RotatePoint( &Edge->m_Start0, -module->m_Orient );
 
@@ -355,16 +362,20 @@ EDGE_MODULE* FOOTPRINT_EDIT_FRAME::Begin_Edge_Module( EDGE_MODULE* Edge,
                 Edge = newedge;     // point now new item
 
                 Edge->m_Flags = IS_NEW;
-                Edge->m_Width = g_ModuleSegmentWidth;
-                Edge->m_Start = GetScreen()->GetCrossHairPosition();
-                Edge->m_End   = Edge->m_Start;
+                Edge->SetWidth( g_ModuleSegmentWidth );
+                Edge->SetStart( GetScreen()->GetCrossHairPosition() );
+                Edge->SetEnd( Edge->GetStart() );
 
-                /* Update relative coordinate. */
-                Edge->m_Start0 = Edge->m_Start - module->m_Pos;
+                // Update relative coordinate.
+                Edge->SetStart0( Edge->GetStart() - module->GetPosition() );
 
-                RotatePoint( &Edge->m_Start0, -module->m_Orient );
+                wxPoint pt( Edge->GetStart0() );
 
-                Edge->m_End0 = Edge->m_Start0;
+                RotatePoint( &pt, -module->GetOrientation() );
+
+                Edge->SetStart0( pt );
+
+                Edge->SetEnd0( Edge->GetStart0() );
 
                 module->CalculateBoundingBox();
                 module->m_LastEdit_Time = time( NULL );
@@ -390,7 +401,7 @@ void FOOTPRINT_EDIT_FRAME::End_Edge_Module( EDGE_MODULE* Edge )
         Edge->m_Flags = 0;
 
         /* If last segment length is 0: remove it */
-        if( Edge->m_Start == Edge->m_End )
+        if( Edge->GetStart() == Edge->GetEnd() )
             Edge->DeleteStructure();
     }
 

pcbnew/edit_track_width.cpp

@@ -108,7 +108,7 @@ bool PCB_EDIT_FRAME::SetTrackSegmentWidth( TRACK*             aTrackItem,
             {
                 // Set new drill value. Note: currently microvias have only a default drill value
                 if( new_drill > 0 )
-                    aTrackItem->SetDrillValue(new_drill);
+                    aTrackItem->SetDrill( new_drill );
                 else
                     aTrackItem->SetDrillDefault();
             }

pcbnew/editedge.cpp

@@ -64,21 +64,23 @@ void PCB_EDIT_FRAME::Place_DrawItem( DRAWSEGMENT* drawitem, wxDC* DC )
 static void Move_Segment( EDA_DRAW_PANEL* aPanel, wxDC* aDC, const wxPoint& aPosition,
                           bool aErase )
 {
-    DRAWSEGMENT* Segment = (DRAWSEGMENT*) aPanel->GetScreen()->GetCurItem();
+    DRAWSEGMENT* segment = (DRAWSEGMENT*) aPanel->GetScreen()->GetCurItem();
 
-    if( Segment == NULL )
+    if( segment == NULL )
         return;
 
     if( aErase )
-        Segment->Draw( aPanel, aDC, GR_XOR );
+        segment->Draw( aPanel, aDC, GR_XOR );
 
     wxPoint delta;
     delta = aPanel->GetScreen()->GetCrossHairPosition() - s_LastPosition;
-    Segment->m_Start += delta;
-    Segment->m_End   += delta;
+
+    segment->SetStart( segment->GetStart() + delta );
+    segment->SetEnd(   segment->GetEnd()   + delta );
+
     s_LastPosition = aPanel->GetScreen()->GetCrossHairPosition();
 
-    Segment->Draw( aPanel, aDC, GR_XOR );
+    segment->Draw( aPanel, aDC, GR_XOR );
 }
 
 
@@ -221,10 +223,11 @@ DRAWSEGMENT* PCB_EDIT_FRAME::Begin_DrawSegment( DRAWSEGMENT* Segment, int shape,
         SetCurItem( Segment = new DRAWSEGMENT( GetBoard() ) );
         Segment->m_Flags = IS_NEW;
         Segment->SetLayer( getActiveLayer() );
-        Segment->m_Width = s_large;
-        Segment->m_Shape = shape;
-        Segment->m_Angle = 900;
-        Segment->m_Start = Segment->m_End = GetScreen()->GetCrossHairPosition();
+        Segment->SetWidth( s_large );
+        Segment->SetShape( shape );
+        Segment->SetAngle( 900 );
+        Segment->SetStart( GetScreen()->GetCrossHairPosition() );
+        Segment->SetEnd( GetScreen()->GetCrossHairPosition() );
         DrawPanel->SetMouseCapture( DrawSegment, Abort_EditEdge );
     }
     else    /* The ending point ccordinate Segment->m_End was updated by he function
@@ -232,11 +235,11 @@ DRAWSEGMENT* PCB_EDIT_FRAME::Begin_DrawSegment( DRAWSEGMENT* Segment, int shape,
              * during the segment creation
              */
     {
-        if( Segment->m_Start != Segment->m_End )
+        if( Segment->GetStart() != Segment->GetEnd() )
         {
-            if( Segment->m_Shape == S_SEGMENT )
+            if( Segment->GetShape() == S_SEGMENT )
             {
-                SaveCopyInUndoList(Segment, UR_NEW );
+                SaveCopyInUndoList( Segment, UR_NEW );
                 GetBoard()->Add( Segment );
 
                 OnModify();
@@ -250,11 +253,12 @@ DRAWSEGMENT* PCB_EDIT_FRAME::Begin_DrawSegment( DRAWSEGMENT* Segment, int shape,
 
                 Segment->m_Flags = IS_NEW;
                 Segment->SetLayer( DrawItem->GetLayer() );
-                Segment->m_Width = s_large;
-                Segment->m_Shape = DrawItem->m_Shape;
-                Segment->m_Type  = DrawItem->m_Type;
-                Segment->m_Angle = DrawItem->m_Angle;
-                Segment->m_Start = Segment->m_End = DrawItem->m_End;
+                Segment->SetWidth( s_large );
+                Segment->SetShape( DrawItem->GetShape() );
+                Segment->SetType( DrawItem->GetType() );
+                Segment->SetAngle( DrawItem->GetAngle() );
+                Segment->SetStart( DrawItem->GetEnd() );
+                Segment->SetEnd( DrawItem->GetEnd() );
                 DrawSegment( DrawPanel, DC, wxDefaultPosition, false );
             }
             else
@@ -276,10 +280,10 @@ void PCB_EDIT_FRAME::End_Edge( DRAWSEGMENT* Segment, wxDC* DC )
 
     Segment->Draw( DrawPanel, DC, GR_OR );
 
-    /* Delete if segment length is zero. */
-    if( Segment->m_Start == Segment->m_End )
+    // Delete if segment length is zero.
+    if( Segment->GetStart() == Segment->GetEnd() )
     {
-        Segment ->DeleteStructure();
+        Segment->DeleteStructure();
     }
     else
     {
@@ -309,15 +313,18 @@ static void DrawSegment( EDA_DRAW_PANEL* aPanel, wxDC* aDC, const wxPoint& aPosi
     if( aErase )
         Segment->Draw( aPanel, aDC, GR_XOR );
 
-    if( Segments_45_Only && ( Segment->m_Shape == S_SEGMENT ) )
+    if( Segments_45_Only && Segment->GetShape() == S_SEGMENT )
     {
+        wxPoint pt;
+
         CalculateSegmentEndPoint( aPanel->GetScreen()->GetCrossHairPosition(),
-                                  Segment->m_Start.x, Segment->m_Start.y,
-                                  &Segment->m_End.x, &Segment->m_End.y );
+                                  Segment->GetStart().x, Segment->GetStart().y,
+                                  &pt.x, &pt.y );
+        Segment->SetEnd( pt );
     }
-    else    /* here the angle is arbitrary */
+    else    // here the angle is arbitrary
     {
-        Segment->m_End = aPanel->GetScreen()->GetCrossHairPosition();
+        Segment->SetEnd( aPanel->GetScreen()->GetCrossHairPosition() );
     }
 
     Segment->Draw( aPanel, aDC, GR_XOR );

pcbnew/editrack-part2.cpp

@@ -105,7 +105,7 @@ bool PCB_EDIT_FRAME::Other_Layer_Route( TRACK* aTrack, wxDC* DC )
     // Usual via is from copper to component.
     // layer pair is LAYER_N_BACK and LAYER_N_FRONT.
     via->SetLayerPair( LAYER_N_BACK, LAYER_N_FRONT );
-    via->SetDrillValue( GetBoard()->GetCurrentViaDrill() );
+    via->SetDrill( GetBoard()->GetCurrentViaDrill() );
 
     int first_layer = getActiveLayer();
     int last_layer;
@@ -117,7 +117,7 @@ bool PCB_EDIT_FRAME::Other_Layer_Route( TRACK* aTrack, wxDC* DC )
         last_layer = GetScreen()->m_Route_Layer_BOTTOM;
 
     /* Adjust the actual via layer pair */
-    switch ( via->Shape() )
+    switch ( via->GetShape() )
     {
         case VIA_BLIND_BURIED:
             via->SetLayerPair( first_layer, last_layer );

pcbnew/export_gencad.cpp

@@ -891,8 +891,8 @@ static void CreateBoardSection( FILE* aFile, BOARD* aPcb )
             {
                 // XXX GenCAD supports arc boundaries but I've seen nothing that reads them
                 fprintf( aFile, "LINE %g %g %g %g\n",
-                        MapXTo( drawseg->m_Start.x ), MapYTo( drawseg->m_Start.y ),
-                        MapXTo( drawseg->m_End.x ), MapYTo( drawseg->m_End.y ) );
+                        MapXTo( drawseg->GetStart().x ), MapYTo( drawseg->GetStart().y ),
+                        MapXTo( drawseg->GetEnd().x ), MapYTo( drawseg->GetEnd().y ) );
             }
         }
     }
@@ -1041,7 +1041,7 @@ static void FootprintWriteShape( FILE* aFile, MODULE* module )
             if( PtEdge->GetLayer() == SILKSCREEN_N_FRONT
                 || PtEdge->GetLayer() == SILKSCREEN_N_BACK )
             {
-                switch( PtEdge->m_Shape )
+                switch( PtEdge->GetShape() )
                 {
                 case S_SEGMENT:
                     fprintf( aFile, "LINE %g %g %g %g\n",
@@ -1068,9 +1068,9 @@ static void FootprintWriteShape( FILE* aFile, MODULE* module )
                     int arcendx, arcendy;
                     arcendx = PtEdge->m_End0.x - PtEdge->m_Start0.x;
                     arcendy = PtEdge->m_End0.y - PtEdge->m_Start0.y;
-                    RotatePoint( &arcendx, &arcendy, -PtEdge->m_Angle );
-                    arcendx += PtEdge->m_Start0.x;
-                    arcendy += PtEdge->m_Start0.y;
+                    RotatePoint( &arcendx, &arcendy, -PtEdge->GetAngle() );
+                    arcendx += PtEdge->GetStart0().x;
+                    arcendy += PtEdge->GetStart0().y;
                     if( Yaxis_sign == -1 )
                     {
                         // Flipping Y flips the arc direction too
@@ -1078,19 +1078,19 @@ static void FootprintWriteShape( FILE* aFile, MODULE* module )
                                  (arcendx) / SCALE_FACTOR,
                                  (Yaxis_sign * arcendy) / SCALE_FACTOR,
                                  (PtEdge->m_End0.x) / SCALE_FACTOR,
-                                 (Yaxis_sign * PtEdge->m_End0.y) / SCALE_FACTOR,
-                                 (PtEdge->m_Start0.x) / SCALE_FACTOR,
-                                 (Yaxis_sign * PtEdge->m_Start0.y) / SCALE_FACTOR );
+                                 (Yaxis_sign * PtEdge->GetEnd0().y) / SCALE_FACTOR,
+                                 (PtEdge->GetStart0().x) / SCALE_FACTOR,
+                                 (Yaxis_sign * PtEdge->GetStart0().y) / SCALE_FACTOR );
                     }
                     else
                     {
                         fprintf( aFile, "ARC %g %g %g %g %g %g\n",
-                                 (PtEdge->m_End0.x) / SCALE_FACTOR,
-                                 (Yaxis_sign * PtEdge->m_End0.y) / SCALE_FACTOR,
+                                 (PtEdge->GetEnd0().x) / SCALE_FACTOR,
+                                 (Yaxis_sign * PtEdge->GetEnd0().y) / SCALE_FACTOR,
                                  (arcendx) / SCALE_FACTOR,
                                  (Yaxis_sign * arcendy) / SCALE_FACTOR,
-                                 (PtEdge->m_Start0.x) / SCALE_FACTOR,
-                                 (Yaxis_sign * PtEdge->m_Start0.y) / SCALE_FACTOR );
+                                 (PtEdge->GetStart0().x) / SCALE_FACTOR,
+                                 (Yaxis_sign * PtEdge->GetStart0().y) / SCALE_FACTOR );
                     }
                     break;
                 }

pcbnew/export_vrml.cpp

@@ -593,16 +593,16 @@ static void export_vrml_arc( int layer, double startx, double starty, /*{{{*/
 static void export_vrml_drawsegment( DRAWSEGMENT* drawseg ) /*{{{*/
 {
     int    layer = drawseg->GetLayer();
-    double w     = drawseg->m_Width;
-    double x     = drawseg->m_Start.x;
-    double y     = drawseg->m_Start.y;
-    double xf    = drawseg->m_End.x;
-    double yf    = drawseg->m_End.y;
+    double w     = drawseg->GetWidth();
+    double x     = drawseg->GetStart().x;
+    double y     = drawseg->GetStart().y;
+    double xf    = drawseg->GetEnd().x;
+    double yf    = drawseg->GetEnd().y;
 
     /* Items on the edge layer are high, not thick */
     if( layer == EDGE_N )
     {
-        switch( drawseg->m_Shape )
+        switch( drawseg->GetShape() )
         {
         /* There is a special 'varc' primitive for this */
         case S_ARC:
@@ -630,7 +630,7 @@ static void export_vrml_drawsegment( DRAWSEGMENT* drawseg ) /*{{{*/
     }
     else
     {
-        switch( drawseg->m_Shape )
+        switch( drawseg->GetShape() )
         {
         case S_ARC:
             export_vrml_arc( layer, x, y, xf, yf, w, 3 );
@@ -856,13 +856,13 @@ static void export_vrml_text_module( TEXTE_MODULE* module ) /*{{{*/
 static void export_vrml_edge_module( EDGE_MODULE* module ) /*{{{*/
 {
     int    layer = module->GetLayer();
-    double x     = module->m_Start.x;
-    double y     = module->m_Start.y;
-    double xf    = module->m_End.x;
-    double yf    = module->m_End.y;
-    double w     = module->m_Width;
+    double x     = module->GetStart().x;
+    double y     = module->GetStart().y;
+    double xf    = module->GetEnd().x;
+    double yf    = module->GetEnd().y;
+    double w     = module->GetWidth();
 
-    switch( module->m_Shape )
+    switch( module->GetShape() )
     {
     case S_ARC:
         export_vrml_arc( layer, x, y, xf, yf, w, 3 );

pcbnew/gen_modules_placefile.cpp

@@ -515,15 +515,15 @@ void WriteDrawSegmentPcb( DRAWSEGMENT* PtDrawSegment, FILE* rptfile )
     double radius, width;
     char   line[1024];
 
-    ux0 = PtDrawSegment->m_Start.x * conv_unit;
-    uy0 = PtDrawSegment->m_Start.y * conv_unit;
+    ux0 = PtDrawSegment->GetStart().x * conv_unit;
+    uy0 = PtDrawSegment->GetStart().y * conv_unit;
 
-    dx = PtDrawSegment->m_End.x * conv_unit;
-    dy = PtDrawSegment->m_End.y * conv_unit;
+    dx = PtDrawSegment->GetEnd().x * conv_unit;
+    dy = PtDrawSegment->GetEnd().y * conv_unit;
 
-    width = PtDrawSegment->m_Width * conv_unit;
+    width = PtDrawSegment->GetWidth() * conv_unit;
 
-    switch( PtDrawSegment->m_Shape )
+    switch( PtDrawSegment->GetShape() )
     {
     case S_CIRCLE:
         radius = hypot( dx - ux0, dy - uy0 );
@@ -536,13 +536,15 @@ void WriteDrawSegmentPcb( DRAWSEGMENT* PtDrawSegment, FILE* rptfile )
 
     case S_ARC:
         {
-            int endx = PtDrawSegment->m_End.x, endy = PtDrawSegment->m_End.y;
+            int endx = PtDrawSegment->GetEnd().x;
+            int endy = PtDrawSegment->GetEnd().y;
+
             radius = hypot( dx - ux0, dy - uy0 );
             RotatePoint( &endx,
                          &endy,
-                         PtDrawSegment->m_Start.x,
-                         PtDrawSegment->m_Start.y,
-                         PtDrawSegment->m_Angle );
+                         PtDrawSegment->GetStart().x,
+                         PtDrawSegment->GetStart().y,
+                         PtDrawSegment->GetAngle() );
 
             fprintf( rptfile, "$ARC \n" );
             fprintf( rptfile, "centre %.6lf %.6lf\n", ux0, uy0 );

pcbnew/gpcb_exchange.cpp

@@ -158,13 +158,15 @@ bool MODULE::Read_GPCB_Descr( const wxString& CmpFullFileName )
     #define TEXT_DEFAULT_SIZE  400
     #define OLD_GPCB_UNIT_CONV 10
     #define NEW_GPCB_UNIT_CONV 0.1
+
     FILE*         cmpfile;
     double        conv_unit = NEW_GPCB_UNIT_CONV; // GPCB unit = 0.01 mils and Pcbnew 0.1
+
     // Old version unit = 1 mil, so conv_unit is 10 or 0.1
     bool          success = true;
-    char*         Line;
+    char*         line;
     long          ibuf[100];
-    EDGE_MODULE*  DrawSegm;
+    EDGE_MODULE*  drawSeg;
     D_PAD*        Pad;
     wxArrayString params;
     int           iprmcnt, icnt_max, iflgidx;
@@ -178,10 +180,10 @@ bool MODULE::Read_GPCB_Descr( const wxString& CmpFullFileName )
 
     reader.ReadLine();
 
-    Line = reader.Line();
+    line = reader.Line();
 
     params.Clear();
-    Extract_Parameters( params, Line );
+    Extract_Parameters( params, line );
 
     iprmcnt  = 0;
     icnt_max = params.GetCount();
@@ -224,6 +226,7 @@ bool MODULE::Read_GPCB_Descr( const wxString& CmpFullFileName )
     iprmcnt++;
     for( int ii = 0; ii < 20; ii++ )
         ibuf[ii] = 0;
+
     for( int ii = 0; ii <= 8; ii++, iprmcnt++ ) // upt to 6 params + terminal char.
     {
         if( iprmcnt >= icnt_max )
@@ -265,9 +268,10 @@ bool MODULE::Read_GPCB_Descr( const wxString& CmpFullFileName )
 
     while( reader.ReadLine() )
     {
-        Line = reader.Line();
+        line = reader.Line();
         params.Clear();
-        Extract_Parameters( params, Line );
+        Extract_Parameters( params, line );
+
         if( params.GetCount() > 3 )    // Test units value for a string line param (more than 3 params : ident [ xx ] )
         {
             if( params[1] == wxT( "(" ) )
@@ -278,16 +282,14 @@ bool MODULE::Read_GPCB_Descr( const wxString& CmpFullFileName )
 
         if( params[0].CmpNoCase( wxT( "ElementLine" ) ) == 0 )      // line descr
         {                                                           // Format: ElementLine [X1 Y1 X2 Y2 Thickness]
-            DrawSegm = new EDGE_MODULE( this );
-            DrawSegm->SetLayer( SILKSCREEN_N_FRONT );
-            DrawSegm->m_Shape = S_SEGMENT;
-
-            m_Drawings.PushBack( DrawSegm );
+            wxPoint start0;
+            wxPoint end0;
+            int     width;
 
             int*    list[5] = {
-                &DrawSegm->m_Start0.x, &DrawSegm->m_Start0.y,
-                &DrawSegm->m_End0.x,   &DrawSegm->m_End0.y,
-                &DrawSegm->m_Width
+                        &start0.x, &start0.y,
+                        &end0.x,   &end0.y,
+                        &width
                     };
 
             for( unsigned ii = 0; ii < 5; ii++ )
@@ -301,18 +303,29 @@ bool MODULE::Read_GPCB_Descr( const wxString& CmpFullFileName )
                 }
             }
 
-            DrawSegm->SetDrawCoord();
+            drawSeg = new EDGE_MODULE( this );
+            drawSeg->SetLayer( SILKSCREEN_N_FRONT );
+            drawSeg->SetShape( S_SEGMENT );
+
+            drawSeg->SetStart0( start0 );
+            drawSeg->SetEnd0( end0 );
+            drawSeg->SetWidth( width );
+
+            drawSeg->SetDrawCoord();
+
+            m_Drawings.PushBack( drawSeg );
+
             continue;
         }
 
         if( params[0].CmpNoCase( wxT( "ElementArc" ) ) == 0 )       // Arc descr
         {                                                           // format: ElementArc [X Y Width Height StartAngle DeltaAngle Thickness]
             // Pcbnew does know ellipse so we must have Width = Height
-            DrawSegm = new EDGE_MODULE( this );
-            DrawSegm->SetLayer( SILKSCREEN_N_FRONT );
-            DrawSegm->m_Shape = S_ARC;
+            drawSeg = new EDGE_MODULE( this );
+            drawSeg->SetLayer( SILKSCREEN_N_FRONT );
+            drawSeg->SetShape( S_ARC );
 
-            m_Drawings.PushBack( DrawSegm );
+            m_Drawings.PushBack( drawSeg );
 
             for( unsigned ii = 0; ii < 7; ii++ )
             {
@@ -328,21 +341,29 @@ bool MODULE::Read_GPCB_Descr( const wxString& CmpFullFileName )
                     ibuf[ii] = 0;
             }
 
-            int     radius = (ibuf[2] + ibuf[3]) / 4; // for and arc: ibuf[3] = ibuf[4]. Pcbnew does not know ellipses
+            // for and arc: ibuf[3] = ibuf[4]. Pcbnew does not know ellipses
+            int     radius = (ibuf[2] + ibuf[3]) / 4;
+
             wxPoint centre;
             centre.x = wxRound( ibuf[0] * conv_unit );
             centre.y = wxRound( ibuf[1] * conv_unit );
-            DrawSegm->m_Start0 = centre;
-            int start_angle = ibuf[4] * 10;     // Pcbnew uses 0.1 degrees as units
+
+            drawSeg->SetStart0( centre );
+
+            double start_angle = ibuf[4] * 10;  // Pcbnew uses 0.1 degrees as units
             start_angle       -= 1800;          // Use normal X axis  as reference
-            DrawSegm->m_Angle  = ibuf[5] * 10;  // Angle value is clockwise in gpcb and Pcbnew
-            DrawSegm->m_End0.x = wxRound( radius * conv_unit );
-            DrawSegm->m_End0.y = 0;
-            RotatePoint( &DrawSegm->m_End0, -start_angle );// Calculate start point coordinate of arc
-            DrawSegm->m_End0 += centre;
-
-            DrawSegm->m_Width = wxRound( ibuf[6] * conv_unit );
-            DrawSegm->SetDrawCoord();
+
+            drawSeg->SetAngle( ibuf[5] * 10 ); // Angle value is clockwise in gpcb and Pcbnew
+
+            drawSeg->SetEnd0( wxPoint( wxRound( radius * conv_unit ), 0 ) );
+
+            // Calculate start point coordinate of arc
+            wxPoint arcStart( drawSeg->GetEnd0() );
+            RotatePoint( &arcStart, -start_angle );
+            drawSeg->SetEnd0( centre + arcStart );
+
+            drawSeg->SetWidth( wxRound( ibuf[6] * conv_unit ) );
+            drawSeg->SetDrawCoord();
             continue;
         }
 

pcbnew/ioascii.cpp

@@ -178,13 +178,13 @@ int PCB_BASE_FRAME::ReadListeSegmentDescr( LINE_READER* aReader,
         if( arg_count < 7 || drill <= 0 )
             newTrack->SetDrillDefault();
         else
-            newTrack->SetDrillValue( drill );
+            newTrack->SetDrill( drill );
 
         newTrack->SetLayer( layer );
 
         if( makeType == PCB_VIA_T ) // Ensure layers are OK when possible:
         {
-            if( newTrack->Shape() == VIA_THROUGH )
+            if( newTrack->GetShape() == VIA_THROUGH )
                 ( (SEGVIA*) newTrack )->SetLayerPair( LAYER_N_FRONT, LAYER_N_BACK );
         }
 
@@ -857,6 +857,8 @@ bool WriteSheetDescr( BASE_SCREEN* screen, FILE* File )
 }
 
 
+#if !defined( USE_NEW_PCBNEW_LOAD )
+
 static bool ReadSheetDescr( BASE_SCREEN* screen, LINE_READER* aReader )
 {
     char    buf[1024];
@@ -963,8 +965,6 @@ static bool ReadSheetDescr( BASE_SCREEN* screen, LINE_READER* aReader )
 }
 
 
-#if !defined( USE_NEW_PCBNEW_LOAD )
-
 int PCB_EDIT_FRAME::ReadPcbFile( LINE_READER* aReader, bool Append )
 {
     wxBusyCursor dummy;
@@ -975,8 +975,6 @@ int PCB_EDIT_FRAME::ReadPcbFile( LINE_READER* aReader, bool Append )
 
     BOARD* board = GetBoard();
 
-    NbDraw = NbTrack = NbZone = NbMod = NbNets = -1;
-
     board->m_Status_Pcb = 0;
     board->m_NetClasses.Clear();
 

pcbnew/item_io.cpp

@@ -148,15 +148,15 @@ bool DRAWSEGMENT::Save( FILE* aFile ) const
 
     if( m_Type != S_CURVE )
     {
-        fprintf( aFile, "De %d %d %d %lX %X\n",
-                 m_Layer, m_Type, m_Angle,
-                 m_TimeStamp, ReturnStatus() );
+        fprintf( aFile, "De %d %d %g %lX %X\n",
+                 m_Layer, m_Type, GetAngle(),
+                 m_TimeStamp, GetStatus() );
     }
     else
     {
-        fprintf( aFile, "De %d %d %d %lX %X %d %d %d %d\n",
-                 m_Layer, m_Type, m_Angle,
-                 m_TimeStamp, ReturnStatus(),
+        fprintf( aFile, "De %d %d %g %lX %X %d %d %d %d\n",
+                 m_Layer, m_Type, GetAngle(),
+                 m_TimeStamp, GetStatus(),
                  m_BezierC1.x,m_BezierC1.y,
                  m_BezierC2.x,m_BezierC2.y);
     }
@@ -437,8 +437,8 @@ bool TEXTE_PCB::Save( FILE* aFile ) const
 
     delete list;
 
-    fprintf( aFile, "Po %d %d %d %d %d %d\n",
-             m_Pos.x, m_Pos.y, m_Size.x, m_Size.y, m_Thickness, m_Orient );
+    fprintf( aFile, "Po %d %d %d %d %d %g\n",
+             m_Pos.x, m_Pos.y, m_Size.x, m_Size.y, m_Thickness, GetOrientation() );
 
     char hJustify = 'L';
     switch( m_HJustify )
@@ -521,10 +521,10 @@ bool EDGE_MODULE::Save( FILE* aFile ) const
         break;
 
     case S_ARC:
-        ret = fprintf( aFile, "DA %d %d %d %d %d %d %d\n",
+        ret = fprintf( aFile, "DA %d %d %d %d %g %d %d\n",
                        m_Start0.x, m_Start0.y,
                        m_End0.x, m_End0.y,
-                       m_Angle,
+                       GetAngle(),
                        m_Width, m_Layer );
         break;
 
@@ -565,7 +565,7 @@ bool TRACK::Save( FILE* aFile ) const
 
     fprintf( aFile, "De %d %d %d %lX %X\n",
              m_Layer, type, GetNet(),
-             m_TimeStamp, ReturnStatus() );
+             m_TimeStamp, GetStatus() );
 
     return true;
 }
@@ -587,16 +587,16 @@ bool DIMENSION::Save( FILE* aFile ) const
 
     fprintf( aFile, "Va %d\n", m_Value );
 
-    if( !m_Text->m_Text.IsEmpty() )
-        fprintf( aFile, "Te %s\n", EscapedUTF8( m_Text->m_Text ).c_str() );
+    if( !m_Text.GetText().IsEmpty() )
+        fprintf( aFile, "Te %s\n", EscapedUTF8( m_Text.GetText() ).c_str() );
     else
         fprintf( aFile, "Te \"?\"\n" );
 
-    fprintf( aFile, "Po %d %d %d %d %d %d %d\n",
-             m_Text->m_Pos.x, m_Text->m_Pos.y,
-             m_Text->m_Size.x, m_Text->m_Size.y,
-             m_Text->GetThickness(), m_Text->GetOrientation(),
-             m_Text->m_Mirror ? 0 : 1 );
+    fprintf( aFile, "Po %d %d %d %d %d %g %d\n",
+             m_Text.m_Pos.x, m_Text.m_Pos.y,
+             m_Text.m_Size.x, m_Text.m_Size.y,
+             m_Text.GetThickness(), m_Text.GetOrientation(),
+             m_Text.m_Mirror ? 0 : 1 );
 
     fprintf( aFile, "Sb %d %d %d %d %d %d\n", S_SEGMENT,
              m_crossBarOx, m_crossBarOy,
@@ -747,9 +747,9 @@ bool MODULE::Save( FILE* aFile ) const
     else
         statusTxt[1] = '~';
 
-    fprintf( aFile, "Po %d %d %d %d %8.8lX %8.8lX %s\n",
+    fprintf( aFile, "Po %d %d %g %d %8.8lX %8.8lX %s\n",
              m_Pos.x, m_Pos.y,
-             m_Orient, m_Layer, m_LastEdit_Time,
+             GetOrientation(), m_Layer, m_LastEdit_Time,
              m_TimeStamp, statusTxt );
 
     fprintf( aFile, "Li %s\n", TO_UTF8( m_LibRef ) );
@@ -1158,12 +1158,15 @@ int MODULE::ReadDescr( LINE_READER* aReader )
         switch( Line[0] )
         {
         case 'P':
+            double orientation;
             memset( BufCar1, 0, sizeof(BufCar1) );
-            sscanf( PtLine, "%d %d %d %d %lX %lX %s",
+            sscanf( PtLine, "%d %d %lf %d %lX %lX %s",
                     &m_Pos.x, &m_Pos.y,
-                    &m_Orient, &m_Layer,
+                    &orientation, &m_Layer,
                     &m_LastEdit_Time, &m_TimeStamp, BufCar1 );
 
+            SetOrientation( orientation );
+
             m_ModuleStatus = 0;
 
             if( BufCar1[0] == 'F' )
@@ -1331,11 +1334,14 @@ int EDGE_MODULE::ReadDescr( LINE_READER* aReader )
     switch( m_Shape )
     {
     case S_ARC:
-        sscanf( Line + 3, "%d %d %d %d %d %d %d",
+        double angle;
+        sscanf( Line + 3, "%d %d %d %d %lf %d %d",
                 &m_Start0.x, &m_Start0.y,
                 &m_End0.x, &m_End0.y,
-                &m_Angle, &m_Width, &m_Layer );
-        NORMALIZE_ANGLE_360( m_Angle );
+                &angle, &m_Width, &m_Layer );
+
+        NORMALIZE_ANGLE_360( angle );
+        SetAngle( angle );
         break;
 
     case S_SEGMENT:
@@ -1441,14 +1447,14 @@ bool DIMENSION::ReadDimensionDescr( LINE_READER* aReader )
                 layer = LAST_NO_COPPER_LAYER;
 
             SetLayer( layer );
-            m_Text->SetLayer( layer );
+            m_Text.SetLayer( layer );
             continue;
         }
 
         if( Line[0] == 'T' )
         {
             ReadDelimitedText( Text, Line + 2, sizeof(Text) );
-            m_Text->m_Text = FROM_UTF8( Text );
+            m_Text.m_Text = FROM_UTF8( Text );
             continue;
         }
 
@@ -1458,15 +1464,15 @@ bool DIMENSION::ReadDimensionDescr( LINE_READER* aReader )
             int orientation;
             int thickness;
             sscanf( Line + 2, " %d %d %d %d %d %d %d",
-                    &m_Text->m_Pos.x, &m_Text->m_Pos.y,
-                    &m_Text->m_Size.x, &m_Text->m_Size.y,
+                    &m_Text.m_Pos.x, &m_Text.m_Pos.y,
+                    &m_Text.m_Size.x, &m_Text.m_Size.y,
                     &thickness, &orientation,
                     &normal_display );
 
-            m_Text->m_Mirror = normal_display ? false : true;
-            m_Pos = m_Text->m_Pos;
-            m_Text->SetOrientation( orientation );
-            m_Text->SetThickness( thickness );
+            m_Text.m_Mirror = normal_display ? false : true;
+            m_Pos = m_Text.m_Pos;
+            m_Text.SetOrientation( orientation );
+            m_Text.SetThickness( thickness );
             continue;
         }
 
@@ -1580,7 +1586,9 @@ bool DRAWSEGMENT::ReadDrawSegmentDescr( LINE_READER* aReader )
                     sscanf( token,"%d",&m_Type );
                     break;
                 case 2:
-                    sscanf( token,"%d",&m_Angle );
+                    double angle;
+                    sscanf( token, "%lf", &angle );
+                    SetAngle( angle );
                     break;
                 case 3:
                     sscanf( token,"%lX",&m_TimeStamp );
@@ -2062,9 +2070,12 @@ int TEXTE_PCB::ReadTextePcbDescr( LINE_READER* aReader )
         }
         if( strncmp( line, "Po", 2 ) == 0 )
         {
-            sscanf( line + 2, " %d %d %d %d %d %d",
+            double angle;
+            sscanf( line + 2, " %d %d %d %d %d %lf",
                     &m_Pos.x, &m_Pos.y, &m_Size.x, &m_Size.y,
-                    &m_Thickness, &m_Orient );
+                    &m_Thickness, &angle );
+
+            SetOrientation( angle );
 
             // Ensure the text has minimal size to see this text on screen:
             if( m_Size.x < 5 )
@@ -2135,6 +2146,7 @@ int TEXTE_MODULE::ReadDescr( LINE_READER* aReader )
     int     type;
     char    BufCar1[128], BufCar2[128], BufCar3[128];
     char*   line = aReader->Line();
+    double  angle;
 
     int     layer = SILKSCREEN_N_FRONT;
 
@@ -2142,16 +2154,19 @@ int TEXTE_MODULE::ReadDescr( LINE_READER* aReader )
     BufCar2[0] = 0;
     BufCar3[0] = 0;
 
-    if( sscanf( line + 1, "%d %d %d %d %d %d %d %s %s %d %s",
+    if( sscanf( line + 1, "%d %d %d %d %d %lf %d %s %s %d %s",
                 &type,
                 &m_Pos0.x, &m_Pos0.y,
                 &m_Size.y, &m_Size.x,
-                &m_Orient, &m_Thickness,
+                &angle,    &m_Thickness,
                 BufCar1, BufCar2, &layer, BufCar3 ) >= 10 )
     {
         success = true;
+
+        SetOrientation( angle );
     }
 
+
     if( (type != TEXT_is_REFERENCE) && (type != TEXT_is_VALUE) )
         type = TEXT_is_DIVERS;
 

pcbnew/kicad_plugin.h

@@ -83,12 +83,6 @@ protected:
     /// initialize PLUGIN like a constructor would, and futz with fresh BOARD if needed.
     void    init( PROPERTIES* aProperties );
 
-    int     NbDraw;
-    int     NbTrack;
-    int     NbZone;
-    int     NbMod;
-    int     NbNets;
-
     double  biuToDisk;      ///< convert from BIUs to disk engineering units with this scale factor
     double  diskToBiu;      ///< convert from disk engineering units to BIUs with this scale factor
 
@@ -135,9 +129,9 @@ protected:
     void load3D( MODULE* aModule );
     void loadPAD( MODULE* aModule );
     void loadMODULE_TEXT( TEXTE_MODULE* aText );
-    void loadEDGE_MODULE( MODULE* aModule );
+    void loadMODULE_EDGE( MODULE* aModule );
 
-    void loadDRAWSEGMENT();
+    void loadPCB_LINE();
     void loadNETINFO_ITEM();
     void loadPCB_TEXT();
     void loadNETCLASS();
@@ -206,17 +200,11 @@ protected:
     void saveNETCLASS( const NETCLASS* aNetclass ) const;
 
     void savePCB_TEXT( const TEXTE_PCB* aText ) const;
-    void saveEDGE_MODULE( const EDGE_MODULE* aEdge ) const;
-    void saveTARGET( const PCB_TARGET* aTarget ) const;
+    void savePCB_TARGET( const PCB_TARGET* aTarget ) const;
+    void savePCB_LINE( const DRAWSEGMENT* aStroke ) const;
     void saveDIMENTION( const DIMENSION* aDimension ) const;
     void saveTRACK( const TRACK* aTrack ) const;
 
-    /**
-     * Function saveSEGZONE
-     * saves the oldschool zones, now outdated in favor of polygon zones.
-     */
-    void saveSEGZONE( const SEGZONE* aZone ) const;
-
     /**
      * Function saveZONE_CONTAINER
      * saves the new polygon zones.

pcbnew/mirepcb.cpp

@@ -102,13 +102,13 @@ TARGET_PROPERTIES_DIALOG_EDITOR::TARGET_PROPERTIES_DIALOG_EDITOR( PCB_EDIT_FRAME
 
     // Size:
     m_MireSizeCtrl = new EDA_VALUE_CTRL( this, _( "Size" ),
-                                         m_Target->m_Size,
+                                         m_Target->GetSize(),
                                          g_UserUnit, LeftBoxSizer,
                                          m_Parent->m_InternalUnits );
 
     // Width:
     m_MireWidthCtrl = new EDA_VALUE_CTRL( this, _( "Width" ),
-                                          m_Target->m_Width,
+                                          m_Target->GetWidth(),
                                           g_UserUnit, LeftBoxSizer,
                                           m_Parent->m_InternalUnits );
 
@@ -118,7 +118,7 @@ TARGET_PROPERTIES_DIALOG_EDITOR::TARGET_PROPERTIES_DIALOG_EDITOR( PCB_EDIT_FRAME
                                   _( "Target Shape:" ),
                                   wxDefaultPosition, wxSize( -1, -1 ),
                                   2, shape_list, 1 );
-    m_MireShape->SetSelection( m_Target->m_Shape ? 1 : 0 );
+    m_MireShape->SetSelection( m_Target->GetShape() ? 1 : 0 );
     LeftBoxSizer->Add( m_MireShape, 0, wxGROW | wxALL, 5 );
 
     GetSizer()->Fit( this );
@@ -146,9 +146,10 @@ void TARGET_PROPERTIES_DIALOG_EDITOR::OnOkClick( wxCommandEvent& event )
         m_Target->m_Flags |= IN_EDIT;      // set flag in edit to force
                                            // undo/redo/abort proper operation
 
-    m_Target->m_Width = m_MireWidthCtrl->GetValue();
-    MireDefaultSize    = m_Target->m_Size = m_MireSizeCtrl->GetValue();
-    m_Target->m_Shape = m_MireShape->GetSelection() ? 1 : 0;
+    m_Target->SetWidth( m_MireWidthCtrl->GetValue() );
+    MireDefaultSize  = m_MireSizeCtrl->GetValue();
+    m_Target->SetSize( m_MireSizeCtrl->GetValue() );
+    m_Target->SetShape( m_MireShape->GetSelection() ? 1 : 0 );
 
     m_Target->Draw( m_Parent->DrawPanel, m_DC, ( m_Target->m_Flags & IS_MOVED ) ? GR_XOR : GR_OR );
 
@@ -188,14 +189,14 @@ static void AbortMoveAndEditTarget( EDA_DRAW_PANEL* Panel, wxDC* DC )
         target->DeleteStructure();
         target = NULL;
     }
-    else    /* it is an existing item: retrieve initial values of parameters */
+    else    // it is an existing item: retrieve initial values of parameters
     {
         if( ( target->m_Flags & (IN_EDIT | IS_MOVED) ) )
         {
-            target->m_Pos   = s_TargetCopy.m_Pos;
-            target->m_Width = s_TargetCopy.m_Width;
-            target->m_Size  = s_TargetCopy.m_Size;
-            target->m_Shape = s_TargetCopy.m_Shape;
+            target->SetPosition( s_TargetCopy.GetPosition() );
+            target->SetWidth(    s_TargetCopy.GetWidth() );
+            target->SetSize(     s_TargetCopy.GetSize() );
+            target->SetShape(    s_TargetCopy.GetShape() );
         }
         target->m_Flags = 0;
         target->Draw( Panel, DC, GR_OR );
@@ -214,9 +215,9 @@ PCB_TARGET* PCB_EDIT_FRAME::CreateTarget( wxDC* DC )
     GetBoard()->Add( target );
 
     target->SetLayer( EDGE_N );
-    target->m_Width = GetBoard()->GetDesignSettings().m_EdgeSegmentWidth;
-    target->m_Size  = MireDefaultSize;
-    target->m_Pos  = DrawPanel->GetScreen()->GetCrossHairPosition();
+    target->SetWidth( GetBoard()->GetDesignSettings().m_EdgeSegmentWidth );
+    target->SetSize( MireDefaultSize );
+    target->SetPosition( DrawPanel->GetScreen()->GetCrossHairPosition() );
 
     PlaceTarget( target, DC );
 
@@ -257,7 +258,7 @@ void PCB_EDIT_FRAME::PlaceTarget( PCB_TARGET* aTarget, wxDC* DC )
 
     if( aTarget->m_Flags == IS_MOVED )
     {
-        SaveCopyInUndoList( aTarget, UR_MOVED, aTarget->m_Pos - s_TargetCopy.m_Pos );
+        SaveCopyInUndoList( aTarget, UR_MOVED, aTarget->GetPosition() - s_TargetCopy.GetPosition() );
         aTarget->m_Flags = 0;
         return;
     }
@@ -286,7 +287,7 @@ static void ShowTargetShapeWhileMovingMouse( EDA_DRAW_PANEL* aPanel, wxDC* aDC,
     if( aErase )
         target->Draw( aPanel, aDC, GR_XOR );
 
-    target->m_Pos = screen->GetCrossHairPosition();
+    target->SetPosition( screen->GetCrossHairPosition() );
 
     target->Draw( aPanel, aDC, GR_XOR );
 }

pcbnew/modedit.cpp

@@ -696,17 +696,17 @@ void FOOTPRINT_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
 void FOOTPRINT_EDIT_FRAME::Transform( MODULE* module, int transform )
 {
     D_PAD*        pad = module->m_Pads;
-    EDA_ITEM*     PtStruct = module->m_Drawings;
+    EDA_ITEM*     item = module->m_Drawings;
     TEXTE_MODULE* textmod;
     EDGE_MODULE*  edgemod;
-    int           angle = 900; // Necessary +- 900 (+- 90 degrees) )
+    double        angle = 900; // Necessary +- 900 (+- 90 degrees) )
 
     switch( transform )
     {
     case ID_MODEDIT_MODULE_ROTATE:
         module->SetOrientation( angle );
 
-        for( ; pad != NULL; pad = (D_PAD*) pad->Next() )
+        for( ;  pad;  pad = pad->Next() )
         {
             pad->SetPos0( pad->m_Pos );
             pad->m_Orient -= angle;
@@ -727,18 +727,18 @@ void FOOTPRINT_EDIT_FRAME::Transform( MODULE* module, int transform )
         if( module->m_Value->m_Orient >= 1800 )
             module->m_Value->m_Orient -= 1800;
 
-        for( ; PtStruct != NULL; PtStruct = PtStruct->Next() )
+        for( ; item != NULL; item = item->Next() )
         {
-            if( PtStruct->Type() == PCB_MODULE_EDGE_T )
+            if( item->Type() == PCB_MODULE_EDGE_T )
             {
-                edgemod = (EDGE_MODULE*) PtStruct;
-                edgemod->m_Start0 = edgemod->m_Start;
-                edgemod->m_End0   = edgemod->m_End;
+                edgemod = (EDGE_MODULE*) item;
+                edgemod->SetStart0( edgemod->GetStart() );
+                edgemod->SetEnd0(   edgemod->GetEnd() );
             }
 
-            if( PtStruct->Type() == PCB_MODULE_TEXT_T )
+            else if( item->Type() == PCB_MODULE_TEXT_T )
             {
-                textmod = (TEXTE_MODULE*) PtStruct;
+                textmod = (TEXTE_MODULE*) item;
                 textmod->SetPos0( textmod->m_Pos );
             }
         }
@@ -758,7 +758,7 @@ void FOOTPRINT_EDIT_FRAME::Transform( MODULE* module, int transform )
                 pad->m_Orient = 3600 - pad->m_Orient;
         }
 
-        /* Reverse mirror of reference. */
+        // Reverse mirror of reference.
         textmod = module->m_Reference;
         NEGATE( textmod->m_Pos.y );
         NEGATE( textmod->m_Pos0.y );
@@ -766,7 +766,7 @@ void FOOTPRINT_EDIT_FRAME::Transform( MODULE* module, int transform )
         if( textmod->m_Orient )
             textmod->m_Orient = 3600 - textmod->m_Orient;
 
-        /* Reverse mirror of value. */
+        // Reverse mirror of value.
         textmod = module->m_Value;
         NEGATE( textmod->m_Pos.y );
         NEGATE( textmod->m_Pos0.y );
@@ -774,26 +774,28 @@ void FOOTPRINT_EDIT_FRAME::Transform( MODULE* module, int transform )
         if( textmod->m_Orient )
             textmod->m_Orient = 3600 - textmod->m_Orient;
 
-        /* Reverse mirror of footprints. */
-        PtStruct = module->m_Drawings;
+        // Reverse mirror of footprints.
+        item = module->m_Drawings;
 
-        for( ; PtStruct != NULL; PtStruct = PtStruct->Next() )
+        for( ; item;  item = item->Next() )
         {
-            switch( PtStruct->Type() )
+            switch( item->Type() )
             {
             case PCB_MODULE_EDGE_T:
-                edgemod = (EDGE_MODULE*) PtStruct;
-                NEGATE( edgemod->m_Start.y );
-                NEGATE( edgemod->m_End.y );
-                /* Invert local coordinates */
+                edgemod = (EDGE_MODULE*) item;
+
+                edgemod->SetStartY( -edgemod->GetStart().y );
+                edgemod->SetEndY( -edgemod->GetEnd().y );
+
+                // Invert local coordinates
                 NEGATE( edgemod->m_Start0.y );
                 NEGATE( edgemod->m_End0.y );
-                NEGATE( edgemod->m_Angle );
+                edgemod->SetAngle( -edgemod->GetAngle() );
                 break;
 
             case PCB_MODULE_TEXT_T:
-                /* Reverse mirror position and mirror. */
-                textmod = (TEXTE_MODULE*) PtStruct;
+                // Reverse mirror position and mirror.
+                textmod = (TEXTE_MODULE*) item;
                 NEGATE( textmod->m_Pos.y );
                 NEGATE( textmod->m_Pos0.y );
 

pcbnew/modedit_onclick.cpp

@@ -92,19 +92,19 @@ void FOOTPRINT_EDIT_FRAME::OnLeftClick( wxDC* DC, const wxPoint& MousePos )
         }
         else if( item->IsNew() )
         {
-            if( ( (EDGE_MODULE*) item )->m_Shape == S_CIRCLE )
+            if( ( (EDGE_MODULE*) item )->GetShape() == S_CIRCLE )
             {
                 End_Edge_Module( (EDGE_MODULE*) item );
                 SetCurItem( NULL );
                 DrawPanel->Refresh();
             }
-            else if( ( (EDGE_MODULE*) item )->m_Shape == S_ARC )
+            else if( ( (EDGE_MODULE*) item )->GetShape() == S_ARC )
             {
                 End_Edge_Module( (EDGE_MODULE*) item );
                 SetCurItem( NULL );
                 DrawPanel->Refresh();
             }
-            else if( ( (EDGE_MODULE*) item )->m_Shape == S_SEGMENT )
+            else if( ( (EDGE_MODULE*) item )->GetShape() == S_SEGMENT )
             {
                 SetCurItem( Begin_Edge_Module( (EDGE_MODULE*) item, DC, 0 ) );
             }

pcbnew/protos.h

@@ -69,7 +69,8 @@ TRACK* LocateIntrusion( TRACK* listStart, TRACK* aTrack, int aLayer, const wxPoi
 void ShowNewTrackWhenMovingCursor( EDA_DRAW_PANEL* aPanel, wxDC* aDC, const wxPoint& aPosition,
                                    bool aErase );
 
-/* Determine coordinate for a segment direction of 0, 90 or 45 degrees,
+/**
+ * Determine coordinate for a segment direction of 0, 90 or 45 degrees,
  * depending on it's position from the origin (ox, oy) and \a aPosiition..
  */
 void CalculateSegmentEndPoint( const wxPoint& aPosition, int ox, int oy, int* fx, int* fy );

pcbnew/specctra_export.cpp

@@ -212,13 +212,24 @@ static DRAWSEGMENT* findPoint( const wxPoint& aPoint, TYPE_COLLECTOR* items )
 
         wxASSERT( graphic->Type() == PCB_LINE_T );
 
+        switch( graphic->GetShape() )
+        {
+        case S_ARC:
+            if( aPoint == graphic->GetArcStart() || aPoint == graphic->GetArcEnd() )
+            {
+                items->Remove(i);
+                return graphic;
+            }
+            break;
+
+        default:
             if( aPoint == graphic->GetStart() || aPoint == graphic->GetEnd() )
             {
                 items->Remove(i);
                 return graphic;
             }
         }
-
+    }
 
 #if defined(DEBUG)
     printf("Unable to find segment matching point (%d,%d)\n",
@@ -229,7 +240,7 @@ static DRAWSEGMENT* findPoint( const wxPoint& aPoint, TYPE_COLLECTOR* items )
         DRAWSEGMENT* graphic = (DRAWSEGMENT*) (*items)[i];
 
         printf( "type=%s, GetStart()=%d,%d  GetEnd()=%d,%d\n",
-                TO_UTF8( BOARD_ITEM::ShowShape( (STROKE_T) graphic->m_Shape ) ),
+                TO_UTF8( BOARD_ITEM::ShowShape( (STROKE_T) graphic->GetShape() ) ),
                 graphic->GetStart().x,
                 graphic->GetStart().y,
                 graphic->GetEnd().x,
@@ -614,17 +625,17 @@ IMAGE* SPECCTRA_DB::makeIMAGE( BOARD* aBoard, MODULE* aModule )
         SHAPE*          outline;
         PATH*           path;
 
-        switch( graphic->m_Shape )
+        switch( graphic->GetShape() )
         {
         case S_SEGMENT:
             outline = new SHAPE( image, T_outline );
             image->Append( outline );
             path = new PATH( outline );
             outline->SetShape( path );
-            path->SetAperture( scale( graphic->m_Width ) );
+            path->SetAperture( scale( graphic->GetWidth() ) );
             path->SetLayerId( "signal" );
-            path->AppendPoint( mapPt( graphic->m_Start0 ) );
-            path->AppendPoint( mapPt( graphic->m_End0 ) );
+            path->AppendPoint( mapPt( graphic->GetStart0() ) );
+            path->AppendPoint( mapPt( graphic->GetEnd0() ) );
             break;
 
         case S_CIRCLE:
@@ -636,7 +647,7 @@ IMAGE* SPECCTRA_DB::makeIMAGE( BOARD* aBoard, MODULE* aModule )
                 image->Append( outline );
                 path = new PATH( outline );
                 outline->SetShape( path );
-                path->SetAperture( scale( graphic->m_Width ) );
+                path->SetAperture( scale( graphic->GetWidth() ) );
                 path->SetLayerId( "signal" );
 
                 // Do the math using KiCad units, that way we stay out of the
@@ -645,8 +656,8 @@ IMAGE* SPECCTRA_DB::makeIMAGE( BOARD* aBoard, MODULE* aModule )
                 // lexer/beautifier, and the spec is not clear that this is
                 // required.  Fixed point floats are all that should be needed.
 
-                double  radius = hypot( double( graphic->m_Start.x - graphic->m_End.x ),
-                                        double( graphic->m_Start.y - graphic->m_End.y ) );
+                double  radius = hypot( double( graphic->GetStart().x - graphic->GetEnd().x ),
+                                        double( graphic->GetStart().y - graphic->GetEnd().y ) );
 
                 // better if evenly divisible into 360
                 const int DEGREE_INTERVAL = 18;         // 18 means 20 line segments
@@ -667,7 +678,7 @@ IMAGE* SPECCTRA_DB::makeIMAGE( BOARD* aBoard, MODULE* aModule )
         case S_ARC:
         default:
             D( printf("makeIMAGE(): unsupported shape %s\n",
-                      TO_UTF8( BOARD_ITEM::ShowShape( (STROKE_T) graphic->m_Shape))  );)
+                      TO_UTF8( BOARD_ITEM::ShowShape( (STROKE_T) graphic->GetShape() ))  );)
             continue;
         }
     }
@@ -778,7 +789,7 @@ void SPECCTRA_DB::fillBOUNDARY( BOARD* aBoard, BOUNDARY* boundary ) throw( IO_ER
 
         for(;;)
         {
-            switch( graphic->m_Shape )
+            switch( graphic->GetShape() )
             {
             case S_SEGMENT:
                 {
@@ -807,14 +818,14 @@ void SPECCTRA_DB::fillBOUNDARY( BOARD* aBoard, BOUNDARY* boundary ) throw( IO_ER
                 {
                     const int STEPS =  9;      // in an arc of 90 degrees
 
-                    wxPoint start  = graphic->GetStart();
-                    wxPoint end    = graphic->GetEnd();
-                    wxPoint center = graphic->m_Start;
-                    int     angle  = -graphic->m_Angle;
+                    wxPoint start  = graphic->GetArcStart();
+                    wxPoint end    = graphic->GetArcEnd();
+                    wxPoint center = graphic->GetCenter();
+                    double  angle  = -graphic->GetAngle();
 
                     if( prevPt != start )
                     {
-                        wxASSERT( prevPt == graphic->GetEnd() );
+                        wxASSERT( prevPt == graphic->GetArcEnd() );
 
                         angle = -angle;
                         EXCHG( start, end );
@@ -824,7 +835,7 @@ void SPECCTRA_DB::fillBOUNDARY( BOARD* aBoard, BOUNDARY* boundary ) throw( IO_ER
 
                     for( int step=1;  step<=STEPS;  ++step )
                     {
-                        int rotation = ( angle * step )/STEPS;
+                        double rotation = ( angle * step )/STEPS;
 
                         nextPt = start;
 
@@ -858,7 +869,7 @@ void SPECCTRA_DB::fillBOUNDARY( BOARD* aBoard, BOUNDARY* boundary ) throw( IO_ER
                     wxString error;
 
                     error.Printf( _("Unsupported DRAWSEGMENT type %s"),
-                        GetChars( BOARD_ITEM::ShowShape( (STROKE_T) graphic->m_Shape ) ) );
+                        GetChars( BOARD_ITEM::ShowShape( (STROKE_T) graphic->GetShape() ) ) );
 
                     ThrowIOError( error );
                 }

pcbnew/specctra_import.cpp

@@ -270,7 +270,7 @@ SEGVIA* SPECCTRA_DB::makeVIA( PADSTACK* aPadstack, const POINT& aPoint, int aNet
 
         via = new SEGVIA( sessionBoard );
         via->SetPosition( mapPt( aPoint, routeResolution ) );
-        via->SetDrillValue( drillDiam );
+        via->SetDrill( drillDiam );
         via->m_Shape = VIA_THROUGH;
         via->m_Width = viaDiam;
         via->SetLayerPair( LAYER_N_FRONT, LAYER_N_BACK );
@@ -288,7 +288,7 @@ SEGVIA* SPECCTRA_DB::makeVIA( PADSTACK* aPadstack, const POINT& aPoint, int aNet
 
         via = new SEGVIA( sessionBoard );
         via->SetPosition( mapPt( aPoint, routeResolution ) );
-        via->SetDrillValue( drillDiam );
+        via->SetDrill( drillDiam );
         via->m_Shape = VIA_THROUGH;
         via->m_Width = viaDiam;
         via->SetLayerPair( LAYER_N_FRONT, LAYER_N_BACK );
@@ -329,7 +329,7 @@ SEGVIA* SPECCTRA_DB::makeVIA( PADSTACK* aPadstack, const POINT& aPoint, int aNet
 
         via = new SEGVIA( sessionBoard );
         via->SetPosition( mapPt( aPoint, routeResolution ) );
-        via->SetDrillValue( drillDiam );
+        via->SetDrill( drillDiam );
 
         if( (topLayerNdx==0 && botLayerNdx==1)
          || (topLayerNdx==copperLayerCount-2 && botLayerNdx==copperLayerCount-1))

pcbnew/swap_layers.cpp

@@ -371,7 +371,7 @@ void PCB_EDIT_FRAME::Swap_Layers( wxCommandEvent& event )
         {
             SEGVIA* Via = (SEGVIA*) pt_segm;
 
-            if( Via->Shape() == VIA_THROUGH )
+            if( Via->GetShape() == VIA_THROUGH )
                 continue;
 
             int     top_layer, bottom_layer;