Skip to content

K
kicad-source-mirror
Commit 73bdd76a authored by Marco Mattila's avatar Marco Mattila
Browse files
Options

Tune pcb plot dialog layout. Make output directory accept relative paths.

parent 50706777
Show whitespace changes
Inline Side-by-side
Showing with 3818 additions and 3423 deletions
pcbnew/dialogs/dialog_plot_base.cpp
View file @ 73bdd76a
......@@ -14,14 +14,20 @@ DIALOG_PLOT_BASE::DIALOG_PLOT_BASE( wxWindow* parent, wxWindowID id, const wxStr
this->SetSizeHints( wxSize( -1,350 ), wxDefaultSize );
wxBoxSizer* bMainSizer;
bMainSizer = new wxBoxSizer( wxVERTICAL );
bMainSizer = new wxBoxSizer( wxHORIZONTAL );
wxBoxSizer* bSizer12;
bSizer12 = new wxBoxSizer( wxVERTICAL );
wxString m_plotFormatOptChoices[] = { _("HPGL"), _("Gerber"), _("Postscript"), _("Postscript A4"), _("DXF") };
int m_plotFormatOptNChoices = sizeof( m_plotFormatOptChoices ) / sizeof( wxString );
m_plotFormatOpt = new wxRadioBox( this, wxID_ANY, _("Format"), wxDefaultPosition, wxDefaultSize, m_plotFormatOptNChoices, m_plotFormatOptChoices, 1, 0 );
m_plotFormatOpt->SetSelection( 0 );
bSizer12->Add( m_plotFormatOpt, 0, wxEXPAND, 5 );
wxBoxSizer* bUpperSizer;
bUpperSizer = new wxBoxSizer( wxHORIZONTAL );
wxBoxSizer* bLeftSizer;
bLeftSizer = new wxBoxSizer( wxVERTICAL );
wxStaticBoxSizer* sbLayersSizer;
sbLayersSizer = new wxStaticBoxSizer( new wxStaticBox( this, wxID_ANY, _("Layers") ), wxHORIZONTAL );
......@@ -33,190 +39,225 @@ DIALOG_PLOT_BASE::DIALOG_PLOT_BASE( wxWindow* parent, wxWindowID id, const wxStr
sbLayersSizer->Add( m_TechnicalLayersBoxSizer, 1, wxALL, 5 );
bLeftSizer->Add( sbLayersSizer, 1, wxEXPAND, 5 );
m_useGerberExtensions = new wxCheckBox( this, wxID_ANY, _("Use proper Gerber extensions"), wxDefaultPosition, wxDefaultSize, 0 );
m_useGerberExtensions->SetToolTip( _("Use Proper Gerber Extensions - .GBL, .GTL, etc...") );
bLeftSizer->Add( m_useGerberExtensions, 0, wxTOP|wxRIGHT|wxLEFT, 5 );
bUpperSizer->Add( sbLayersSizer, 1, wxALL, 3 );
m_excludeEdgeLayerOpt = new wxCheckBox( this, wxID_ANY, _("Exclude pcb edge layer"), wxDefaultPosition, wxDefaultSize, 0 );
m_excludeEdgeLayerOpt->SetToolTip( _("Exclude contents of the pcb edge layer from all other layers") );
bLeftSizer->Add( m_excludeEdgeLayerOpt, 0, wxTOP|wxRIGHT|wxLEFT, 5 );
m_subtractMaskFromSilk = new wxCheckBox( this, wxID_ANY, _("Subtract mask from silk"), wxDefaultPosition, wxDefaultSize, 0 );
m_subtractMaskFromSilk->SetToolTip( _("Remove silkscreen from areas without soldermask") );
wxBoxSizer* bPlotOptionsSizer;
bPlotOptionsSizer = new wxBoxSizer( wxVERTICAL );
bLeftSizer->Add( m_subtractMaskFromSilk, 0, wxTOP|wxRIGHT|wxLEFT, 5 );
wxStaticBoxSizer* sbOptionsSizer;
sbOptionsSizer = new wxStaticBoxSizer( new wxStaticBox( this, wxID_ANY, _("Options") ), wxVERTICAL );
m_plotSheetRef = new wxCheckBox( this, wxID_ANY, _("Plot sheet reference"), wxDefaultPosition, wxDefaultSize, 0 );
bLeftSizer->Add( m_plotSheetRef, 0, wxTOP|wxRIGHT|wxLEFT, 5 );
m_plotSheetRef = new wxCheckBox( this, wxID_ANY, _("Plot sheet reference on all layers"), wxDefaultPosition, wxDefaultSize, 0 );
sbOptionsSizer->Add( m_plotSheetRef, 0, wxTOP|wxRIGHT|wxLEFT, 2 );
m_plotPads_on_Silkscreen = new wxCheckBox( this, ID_ALLOW_PRINT_PAD_ON_SILKSCREEN, _("Plot pads on silkscreen"), wxDefaultPosition, wxDefaultSize, 0 );
m_plotPads_on_Silkscreen->SetToolTip( _("Enable/disable print/plot pads on silkscreen layers\nWhen disable, pads are never potted on silkscreen layers\nWhen enable, pads are potted only if they appear on silkscreen layers") );
bLeftSizer->Add( m_plotPads_on_Silkscreen, 0, wxTOP|wxRIGHT|wxLEFT, 5 );
sbOptionsSizer->Add( m_plotPads_on_Silkscreen, 0, wxTOP|wxRIGHT|wxLEFT, 2 );
m_plotModuleValueOpt = new wxCheckBox( this, wxID_ANY, _("Plot module value"), wxDefaultPosition, wxDefaultSize, 0 );
bLeftSizer->Add( m_plotModuleValueOpt, 0, wxTOP|wxRIGHT|wxLEFT, 5 );
m_plotModuleValueOpt = new wxCheckBox( this, wxID_ANY, _("Plot module value on silkscreen"), wxDefaultPosition, wxDefaultSize, 0 );
sbOptionsSizer->Add( m_plotModuleValueOpt, 0, wxTOP|wxRIGHT|wxLEFT, 2 );
m_plotModuleRefOpt = new wxCheckBox( this, ID_PRINT_REF, _("Plot module reference"), wxDefaultPosition, wxDefaultSize, 0 );
bLeftSizer->Add( m_plotModuleRefOpt, 0, wxTOP|wxRIGHT|wxLEFT, 5 );
m_plotModuleRefOpt = new wxCheckBox( this, ID_PRINT_REF, _("Plot module reference on silkscreen"), wxDefaultPosition, wxDefaultSize, 0 );
sbOptionsSizer->Add( m_plotModuleRefOpt, 0, wxTOP|wxRIGHT|wxLEFT, 2 );
m_plotTextOther = new wxCheckBox( this, wxID_ANY, _("Plot other module texts"), wxDefaultPosition, wxDefaultSize, 0 );
m_plotTextOther = new wxCheckBox( this, wxID_ANY, _("Plot other module texts on silkscreen"), wxDefaultPosition, wxDefaultSize, 0 );
m_plotTextOther->SetToolTip( _("Enable/disable print/plot module field texts on silkscreen layers") );
bLeftSizer->Add( m_plotTextOther, 0, wxTOP|wxRIGHT|wxLEFT, 5 );
sbOptionsSizer->Add( m_plotTextOther, 0, wxTOP|wxRIGHT|wxLEFT, 2 );
m_plotInvisibleText = new wxCheckBox( this, wxID_ANY, _("Force plot invisible texts"), wxDefaultPosition, wxDefaultSize, 0 );
m_plotInvisibleText = new wxCheckBox( this, wxID_ANY, _("Plot invisible texts on silkscreen"), wxDefaultPosition, wxDefaultSize, 0 );
m_plotInvisibleText->SetToolTip( _("Force print/plot module invisible texts on silkscreen layers") );
bLeftSizer->Add( m_plotInvisibleText, 0, wxALL, 5 );
sbOptionsSizer->Add( m_plotInvisibleText, 0, wxALL, 2 );
bUpperSizer->Add( bLeftSizer, 2, wxEXPAND, 5 );
m_plotNoViaOnMaskOpt = new wxCheckBox( this, wxID_ANY, _("Do not tent vias"), wxDefaultPosition, wxDefaultSize, 0 );
m_plotNoViaOnMaskOpt->SetToolTip( _("Print/plot vias on mask layers. They are in this case not protected") );
wxBoxSizer* bPlotOptionsSizer;
bPlotOptionsSizer = new wxBoxSizer( wxVERTICAL );
sbOptionsSizer->Add( m_plotNoViaOnMaskOpt, 0, wxALL, 2 );
m_plotMirrorOpt = new wxCheckBox( this, ID_MIROR_OPT, _("Mirrored plot"), wxDefaultPosition, wxDefaultSize, 0 );
sbOptionsSizer->Add( m_plotMirrorOpt, 0, wxALL, 2 );
wxBoxSizer* bSizer14;
bSizer14 = new wxBoxSizer( wxHORIZONTAL );
wxBoxSizer* bSizer15;
bSizer15 = new wxBoxSizer( wxVERTICAL );
wxString m_drillShapeOptChoices[] = { _("No drill mark"), _("Small mark"), _("Actual hole") };
m_staticText11 = new wxStaticText( this, wxID_ANY, _("Drill marks:"), wxDefaultPosition, wxDefaultSize, 0 );
m_staticText11->Wrap( -1 );
bSizer15->Add( m_staticText11, 0, wxALL, 5 );
wxString m_drillShapeOptChoices[] = { _("None"), _("Small"), _("Actual size") };
int m_drillShapeOptNChoices = sizeof( m_drillShapeOptChoices ) / sizeof( wxString );
m_drillShapeOpt = new wxRadioBox( this, wxID_ANY, _("Hole Options"), wxDefaultPosition, wxDefaultSize, m_drillShapeOptNChoices, m_drillShapeOptChoices, 1, wxRA_SPECIFY_COLS );
m_drillShapeOpt = new wxChoice( this, wxID_ANY, wxDefaultPosition, wxDefaultSize, m_drillShapeOptNChoices, m_drillShapeOptChoices, 0 );
m_drillShapeOpt->SetSelection( 0 );
bPlotOptionsSizer->Add( m_drillShapeOpt, 0, wxEXPAND|wxBOTTOM|wxRIGHT|wxLEFT, 5 );
bSizer15->Add( m_drillShapeOpt, 0, wxEXPAND, 5 );
m_staticText12 = new wxStaticText( this, wxID_ANY, _("Scaling:"), wxDefaultPosition, wxDefaultSize, 0 );
m_staticText12->Wrap( -1 );
bSizer15->Add( m_staticText12, 0, wxALL, 5 );
wxString m_scaleOptChoices[] = { _("Auto scale"), _("Scale 1"), _("Scale 1.5"), _("Scale 2"), _("Scale 3") };
wxString m_scaleOptChoices[] = { _("Auto"), _("1:1"), _("3:2"), _("2:1"), _("3:1") };
int m_scaleOptNChoices = sizeof( m_scaleOptChoices ) / sizeof( wxString );
m_scaleOpt = new wxRadioBox( this, wxID_ANY, _("Scale"), wxDefaultPosition, wxDefaultSize, m_scaleOptNChoices, m_scaleOptChoices, 1, wxRA_SPECIFY_COLS );
m_scaleOpt = new wxChoice( this, wxID_ANY, wxDefaultPosition, wxDefaultSize, m_scaleOptNChoices, m_scaleOptChoices, 0 );
m_scaleOpt->SetSelection( 0 );
bPlotOptionsSizer->Add( m_scaleOpt, 0, wxEXPAND|wxALL, 5 );
bSizer15->Add( m_scaleOpt, 0, wxEXPAND, 5 );
bSizer14->Add( bSizer15, 1, wxALL|wxEXPAND, 3 );
wxBoxSizer* bSizer16;
bSizer16 = new wxBoxSizer( wxVERTICAL );
m_staticText13 = new wxStaticText( this, wxID_ANY, _("Plot mode:"), wxDefaultPosition, wxDefaultSize, 0 );
m_staticText13->Wrap( -1 );
bSizer16->Add( m_staticText13, 0, wxALL, 5 );
wxString m_plotModeOptChoices[] = { _("Line"), _("Filled"), _("Sketch") };
int m_plotModeOptNChoices = sizeof( m_plotModeOptChoices ) / sizeof( wxString );
m_plotModeOpt = new wxRadioBox( this, wxID_ANY, _("Plot Mode"), wxDefaultPosition, wxDefaultSize, m_plotModeOptNChoices, m_plotModeOptChoices, 1, wxRA_SPECIFY_COLS );
m_plotModeOpt = new wxChoice( this, wxID_ANY, wxDefaultPosition, wxDefaultSize, m_plotModeOptNChoices, m_plotModeOptChoices, 0 );
m_plotModeOpt->SetSelection( 0 );
bPlotOptionsSizer->Add( m_plotModeOpt, 0, wxALL|wxEXPAND, 5 );
bSizer16->Add( m_plotModeOpt, 0, wxEXPAND, 5 );
wxString m_choicePlotOffsetChoices[] = { _("Absolute"), _("Auxiliary axis") };
int m_choicePlotOffsetNChoices = sizeof( m_choicePlotOffsetChoices ) / sizeof( wxString );
m_choicePlotOffset = new wxRadioBox( this, wxID_ANY, _("Plot Origin"), wxDefaultPosition, wxDefaultSize, m_choicePlotOffsetNChoices, m_choicePlotOffsetChoices, 1, wxRA_SPECIFY_COLS );
m_choicePlotOffset->SetSelection( 1 );
bPlotOptionsSizer->Add( m_choicePlotOffset, 0, wxALL|wxEXPAND, 5 );
m_textDefaultPenSize = new wxStaticText( this, wxID_ANY, _("Default\nlinewidth"), wxDefaultPosition, wxDefaultSize, 0 );
m_textDefaultPenSize->Wrap( -1 );
m_textDefaultPenSize->SetToolTip( _("Pen size used to draw items that have no pen size specified.\nUsed mainly to draw items in sketch mode.") );
bUpperSizer->Add( bPlotOptionsSizer, 0, wxEXPAND, 5 );
bSizer16->Add( m_textDefaultPenSize, 0, wxTOP|wxRIGHT|wxLEFT, 5 );
wxBoxSizer* bSizerFmtPlot;
bSizerFmtPlot = new wxBoxSizer( wxVERTICAL );
m_linesWidth = new wxTextCtrl( this, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
m_linesWidth->SetToolTip( _("Line width for, e.g., sheet references.") );
wxString m_plotFormatOptChoices[] = { _("HPGL"), _("Gerber"), _("Postscript"), _("Postscript A4"), _("DXF export") };
int m_plotFormatOptNChoices = sizeof( m_plotFormatOptChoices ) / sizeof( wxString );
m_plotFormatOpt = new wxRadioBox( this, wxID_ANY, _("Plot Format"), wxDefaultPosition, wxDefaultSize, m_plotFormatOptNChoices, m_plotFormatOptChoices, 1, wxRA_SPECIFY_COLS );
m_plotFormatOpt->SetSelection( 1 );
bSizerFmtPlot->Add( m_plotFormatOpt, 0, wxEXPAND|wxBOTTOM|wxRIGHT|wxLEFT, 5 );
bSizer16->Add( m_linesWidth, 0, wxEXPAND|wxBOTTOM|wxRIGHT|wxLEFT, 5 );
bSizer14->Add( bSizer16, 1, wxALL|wxEXPAND, 3 );
sbOptionsSizer->Add( bSizer14, 1, wxALL|wxEXPAND, 3 );
bPlotOptionsSizer->Add( sbOptionsSizer, 0, wxALL|wxEXPAND, 3 );
bUpperSizer->Add( bPlotOptionsSizer, 1, 0, 5 );
wxBoxSizer* bPlotIndOptionsSizer;
bPlotIndOptionsSizer = new wxBoxSizer( wxVERTICAL );
wxStaticBoxSizer* m_Gerber_OptionsBox;
m_Gerber_OptionsBox = new wxStaticBoxSizer( new wxStaticBox( this, wxID_ANY, _("Gerber Options") ), wxVERTICAL );
m_useGerberExtensions = new wxCheckBox( this, wxID_ANY, _("Use proper file extensions"), wxDefaultPosition, wxDefaultSize, 0 );
m_useGerberExtensions->SetToolTip( _("Use proper Gerber extensions - .GBL, .GTL, etc...") );
m_Gerber_OptionsBox->Add( m_useGerberExtensions, 0, wxLEFT|wxRIGHT|wxTOP, 2 );
m_excludeEdgeLayerOpt = new wxCheckBox( this, wxID_ANY, _("Exclude PCB edge layer\nfrom other layers"), wxDefaultPosition, wxDefaultSize, 0 );
m_excludeEdgeLayerOpt->SetToolTip( _("Exclude contents of the pcb edge layer from all other layers") );
m_Gerber_OptionsBox->Add( m_excludeEdgeLayerOpt, 0, wxTOP|wxRIGHT|wxLEFT, 2 );
m_subtractMaskFromSilk = new wxCheckBox( this, wxID_ANY, _("Subtract mask from\nsilkscren"), wxDefaultPosition, wxDefaultSize, 0 );
m_subtractMaskFromSilk->SetValue(true);
m_subtractMaskFromSilk->SetToolTip( _("Remove silkscreen from areas without soldermask") );
m_Gerber_OptionsBox->Add( m_subtractMaskFromSilk, 0, wxTOP|wxRIGHT|wxLEFT, 2 );
m_useAuxOriginCheckBox = new wxCheckBox( this, wxID_ANY, _("Use auxiliary origin"), wxDefaultPosition, wxDefaultSize, 0 );
m_Gerber_OptionsBox->Add( m_useAuxOriginCheckBox, 0, wxALL, 2 );
bPlotIndOptionsSizer->Add( m_Gerber_OptionsBox, 0, wxALL|wxEXPAND, 3 );
wxStaticBoxSizer* m_HPGL_OptionsBox;
m_HPGL_OptionsBox = new wxStaticBoxSizer( new wxStaticBox( this, wxID_ANY, _("HPGL Options") ), wxVERTICAL );
wxBoxSizer* bSizer22;
bSizer22 = new wxBoxSizer( wxHORIZONTAL );
wxBoxSizer* bSizer20;
bSizer20 = new wxBoxSizer( wxVERTICAL );
m_textPenSize = new wxStaticText( this, wxID_ANY, _("Pen size"), wxDefaultPosition, wxDefaultSize, 0 );
m_textPenSize->Wrap( -1 );
m_HPGL_OptionsBox->Add( m_textPenSize, 0, wxTOP|wxRIGHT|wxLEFT, 5 );
bSizer20->Add( m_textPenSize, 0, wxLEFT|wxRIGHT|wxTOP, 5 );
m_HPGLPenSizeOpt = new wxTextCtrl( this, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
m_HPGL_OptionsBox->Add( m_HPGLPenSizeOpt, 0, wxEXPAND|wxBOTTOM|wxRIGHT|wxLEFT, 5 );
m_staticText3 = new wxStaticText( this, wxID_ANY, _("Pen speed (cm/s)"), wxDefaultPosition, wxDefaultSize, 0 );
m_staticText3->Wrap( -1 );
m_HPGL_OptionsBox->Add( m_staticText3, 0, wxTOP|wxRIGHT|wxLEFT, 5 );
m_HPGLPenSpeedOpt = new wxTextCtrl( this, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
m_HPGLPenSpeedOpt->SetToolTip( _("Set pen speed in cm/s") );
m_HPGL_OptionsBox->Add( m_HPGLPenSpeedOpt, 0, wxBOTTOM|wxRIGHT|wxLEFT|wxEXPAND, 5 );
bSizer20->Add( m_HPGLPenSizeOpt, 0, wxEXPAND|wxBOTTOM|wxRIGHT|wxLEFT, 5 );
m_textPenOvr = new wxStaticText( this, wxID_ANY, _("Pen overlay"), wxDefaultPosition, wxDefaultSize, 0 );
m_textPenOvr->Wrap( -1 );
m_HPGL_OptionsBox->Add( m_textPenOvr, 0, wxTOP|wxRIGHT|wxLEFT, 5 );
bSizer20->Add( m_textPenOvr, 0, wxTOP|wxRIGHT|wxLEFT, 5 );
m_HPGLPenOverlayOpt = new wxTextCtrl( this, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
m_HPGLPenOverlayOpt->SetToolTip( _("Set plot overlay for filling") );
m_HPGL_OptionsBox->Add( m_HPGLPenOverlayOpt, 0, wxBOTTOM|wxRIGHT|wxLEFT|wxEXPAND, 5 );
bSizerFmtPlot->Add( m_HPGL_OptionsBox, 0, wxEXPAND, 5 );
bUpperSizer->Add( bSizerFmtPlot, 0, wxEXPAND, 5 );
wxBoxSizer* bButtonsSizer;
bButtonsSizer = new wxBoxSizer( wxVERTICAL );
bSizer20->Add( m_HPGLPenOverlayOpt, 0, wxBOTTOM|wxRIGHT|wxLEFT|wxEXPAND, 5 );
wxStaticBoxSizer* sbSizerPlotOpt;
sbSizerPlotOpt = new wxStaticBoxSizer( new wxStaticBox( this, wxID_ANY, _("Plot Options") ), wxVERTICAL );
bSizer22->Add( bSizer20, 1, wxEXPAND, 5 );
m_plotPSNegativeOpt = new wxCheckBox( this, wxID_ANY, _("Plot negative"), wxDefaultPosition, wxDefaultSize, 0 );
sbSizerPlotOpt->Add( m_plotPSNegativeOpt, 0, wxALL, 5 );
wxBoxSizer* bSizer21;
bSizer21 = new wxBoxSizer( wxVERTICAL );
m_plotMirrorOpt = new wxCheckBox( this, ID_MIROR_OPT, _("Plot mirror"), wxDefaultPosition, wxDefaultSize, 0 );
sbSizerPlotOpt->Add( m_plotMirrorOpt, 0, wxALL, 5 );
m_textPenSpeed = new wxStaticText( this, wxID_ANY, _("Pen speed (cm/s):"), wxDefaultPosition, wxDefaultSize, 0 );
m_textPenSpeed->Wrap( -1 );
bSizer21->Add( m_textPenSpeed, 0, wxTOP|wxRIGHT|wxLEFT, 5 );
m_plotNoViaOnMaskOpt = new wxCheckBox( this, wxID_ANY, _("Vias on mask"), wxDefaultPosition, wxDefaultSize, 0 );
m_plotNoViaOnMaskOpt->SetToolTip( _("Print/plot vias on mask layers. They are in this case not protected") );
m_HPGLPenSpeedOpt = new wxTextCtrl( this, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
m_HPGLPenSpeedOpt->SetToolTip( _("Set pen speed in cm/s") );
sbSizerPlotOpt->Add( m_plotNoViaOnMaskOpt, 0, wxALL, 5 );
bSizer21->Add( m_HPGLPenSpeedOpt, 0, wxBOTTOM|wxRIGHT|wxLEFT|wxEXPAND, 5 );
bButtonsSizer->Add( sbSizerPlotOpt, 0, wxEXPAND|wxBOTTOM|wxRIGHT|wxLEFT, 5 );
bSizer22->Add( bSizer21, 1, wxEXPAND, 5 );
m_staticText6 = new wxStaticText( this, wxID_ANY, _("Default Pen Size:"), wxDefaultPosition, wxDefaultSize, 0 );
m_staticText6->Wrap( -1 );
m_staticText6->SetToolTip( _("Pen size used to draw items that have no pen size specified.\nUsed mainly to draw items in sketch mode.") );
m_HPGL_OptionsBox->Add( bSizer22, 1, wxEXPAND, 5 );
bButtonsSizer->Add( m_staticText6, 0, wxTOP|wxRIGHT|wxLEFT, 5 );
bPlotIndOptionsSizer->Add( m_HPGL_OptionsBox, 0, wxALL|wxEXPAND, 3 );
m_linesWidth = new wxTextCtrl( this, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
bButtonsSizer->Add( m_linesWidth, 0, wxEXPAND|wxBOTTOM|wxRIGHT|wxLEFT, 5 );
wxStaticBoxSizer* m_PS_OptionsBox;
m_PS_OptionsBox = new wxStaticBoxSizer( new wxStaticBox( this, wxID_ANY, _("Postscript Options") ), wxVERTICAL );
wxBoxSizer* bSizer17;
bSizer17 = new wxBoxSizer( wxHORIZONTAL );
bButtonsSizer->Add( 0, 20, 1, wxEXPAND, 5 );
wxBoxSizer* bSizer18;
bSizer18 = new wxBoxSizer( wxVERTICAL );
m_staticText7 = new wxStaticText( this, wxID_ANY, _("X Scale Adjust:"), wxDefaultPosition, wxDefaultSize, 0 );
m_staticText7 = new wxStaticText( this, wxID_ANY, _("X scale:"), wxDefaultPosition, wxDefaultSize, 0 );
m_staticText7->Wrap( -1 );
bButtonsSizer->Add( m_staticText7, 0, wxRIGHT|wxLEFT, 5 );
bSizer18->Add( m_staticText7, 0, wxALL, 5 );
m_fineAdjustXscaleOpt = new wxTextCtrl( this, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
m_fineAdjustXscaleOpt->SetToolTip( _("Set X scale adjust for exact scale plotting") );
bButtonsSizer->Add( m_fineAdjustXscaleOpt, 0, wxEXPAND|wxBOTTOM|wxRIGHT|wxLEFT, 5 );
bSizer18->Add( m_fineAdjustXscaleOpt, 0, wxEXPAND|wxBOTTOM|wxRIGHT|wxLEFT, 5 );
m_staticText8 = new wxStaticText( this, wxID_ANY, _("Y Scale Adjust:"), wxDefaultPosition, wxDefaultSize, 0 );
m_staticText8->Wrap( -1 );
bButtonsSizer->Add( m_staticText8, 0, wxTOP|wxRIGHT|wxLEFT, 5 );
bSizer17->Add( bSizer18, 1, wxEXPAND, 5 );
m_fineAdjustYscaleOpt = new wxTextCtrl( this, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
bButtonsSizer->Add( m_fineAdjustYscaleOpt, 0, wxEXPAND|wxBOTTOM|wxRIGHT|wxLEFT, 5 );
wxBoxSizer* bSizer19;
bSizer19 = new wxBoxSizer( wxVERTICAL );
m_staticText8 = new wxStaticText( this, wxID_ANY, _("Y scale:"), wxDefaultPosition, wxDefaultSize, 0 );
m_staticText8->Wrap( -1 );
bSizer19->Add( m_staticText8, 0, wxALL, 5 );
bButtonsSizer->Add( 0, 20, 1, wxEXPAND, 5 );
m_fineAdjustYscaleOpt = new wxTextCtrl( this, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
bSizer19->Add( m_fineAdjustYscaleOpt, 0, wxEXPAND|wxBOTTOM|wxRIGHT|wxLEFT, 5 );
m_plotButton = new wxButton( this, wxID_ANY, _("Plot"), wxDefaultPosition, wxDefaultSize, 0 );
m_plotButton->SetDefault();
bButtonsSizer->Add( m_plotButton, 0, wxALL|wxALIGN_CENTER_HORIZONTAL|wxEXPAND, 5 );
bSizer17->Add( bSizer19, 1, wxEXPAND, 5 );
m_buttonSaveOpt = new wxButton( this, ID_SAVE_OPT_PLOT, _("Apply Settings"), wxDefaultPosition, wxDefaultSize, 0 );
bButtonsSizer->Add( m_buttonSaveOpt, 0, wxALL|wxALIGN_CENTER_HORIZONTAL|wxEXPAND, 5 );
m_PS_OptionsBox->Add( bSizer17, 1, wxEXPAND, 5 );
m_buttonDrill = new wxButton( this, ID_CREATE_DRILL_FILE, _("Generate Drill File"), wxDefaultPosition, wxDefaultSize, 0 );
bButtonsSizer->Add( m_buttonDrill, 0, wxALL|wxALIGN_CENTER_HORIZONTAL|wxEXPAND, 5 );
m_plotPSNegativeOpt = new wxCheckBox( this, wxID_ANY, _("Negative plot"), wxDefaultPosition, wxDefaultSize, 0 );
m_PS_OptionsBox->Add( m_plotPSNegativeOpt, 0, wxALL, 2 );
m_buttonQuit = new wxButton( this, wxID_CANCEL, _("Quit"), wxDefaultPosition, wxDefaultSize, 0 );
bButtonsSizer->Add( m_buttonQuit, 0, wxALL|wxALIGN_CENTER_HORIZONTAL|wxEXPAND, 5 );
bPlotIndOptionsSizer->Add( m_PS_OptionsBox, 1, wxALL|wxEXPAND, 3 );
bUpperSizer->Add( bButtonsSizer, 0, wxALIGN_CENTER_VERTICAL|wxEXPAND, 5 );
bUpperSizer->Add( bPlotIndOptionsSizer, 0, 0, 5 );
bMainSizer->Add( bUpperSizer, 0, wxEXPAND, 5 );
bSizer12->Add( bUpperSizer, 0, wxEXPAND, 5 );
wxBoxSizer* bSizerDirChoice;
bSizerDirChoice = new wxBoxSizer( wxVERTICAL );
m_staticTextDir = new wxStaticText( this, wxID_ANY, _("Output Directory:"), wxDefaultPosition, wxDefaultSize, 0 );
m_staticTextDir = new wxStaticText( this, wxID_ANY, _("Output directory:"), wxDefaultPosition, wxDefaultSize, 0 );
m_staticTextDir->Wrap( -1 );
bSizerDirChoice->Add( m_staticTextDir, 0, wxTOP|wxRIGHT|wxLEFT, 5 );
......@@ -224,6 +265,8 @@ DIALOG_PLOT_BASE::DIALOG_PLOT_BASE( wxWindow* parent, wxWindowID id, const wxStr
bSizerDirNmae = new wxBoxSizer( wxHORIZONTAL );
m_outputDirectoryName = new wxTextCtrl( this, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
m_outputDirectoryName->SetToolTip( _("Target directory for plot files. Can be relative or absolute.") );
bSizerDirNmae->Add( m_outputDirectoryName, 1, wxALIGN_LEFT|wxALIGN_CENTER_VERTICAL|wxRIGHT|wxLEFT, 5 );
m_browseButton = new wxButton( this, wxID_ANY, _("Browse..."), wxDefaultPosition, wxDefaultSize, 0 );
......@@ -231,16 +274,36 @@ DIALOG_PLOT_BASE::DIALOG_PLOT_BASE( wxWindow* parent, wxWindowID id, const wxStr
bSizerDirChoice->Add( bSizerDirNmae, 0, wxRIGHT|wxEXPAND, 5 );
bMainSizer->Add( bSizerDirChoice, 0, wxEXPAND, 5 );
bSizer12->Add( bSizerDirChoice, 0, wxEXPAND, 5 );
m_staticText2 = new wxStaticText( this, wxID_ANY, _("Messages:"), wxDefaultPosition, wxDefaultSize, 0 );
m_staticText2->Wrap( -1 );
bMainSizer->Add( m_staticText2, 0, wxTOP|wxRIGHT|wxLEFT, 5 );
bSizer12->Add( m_staticText2, 0, wxTOP|wxRIGHT|wxLEFT, 5 );
m_messagesBox = new wxTextCtrl( this, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, wxTE_MULTILINE );
m_messagesBox->SetMinSize( wxSize( -1,120 ) );
m_messagesBox->SetMinSize( wxSize( -1,100 ) );
bSizer12->Add( m_messagesBox, 1, wxBOTTOM|wxRIGHT|wxLEFT|wxEXPAND, 5 );
bMainSizer->Add( bSizer12, 1, wxALL|wxEXPAND, 5 );
wxBoxSizer* bButtonsSizer;
bButtonsSizer = new wxBoxSizer( wxVERTICAL );
m_plotButton = new wxButton( this, wxID_ANY, _("Plot"), wxDefaultPosition, wxDefaultSize, 0 );
m_plotButton->SetDefault();
bButtonsSizer->Add( m_plotButton, 0, wxALL|wxALIGN_CENTER_HORIZONTAL|wxEXPAND, 5 );
m_buttonSaveOpt = new wxButton( this, ID_SAVE_OPT_PLOT, _("Apply Settings"), wxDefaultPosition, wxDefaultSize, 0 );
bButtonsSizer->Add( m_buttonSaveOpt, 0, wxALL|wxALIGN_CENTER_HORIZONTAL|wxEXPAND, 5 );
m_buttonDrill = new wxButton( this, ID_CREATE_DRILL_FILE, _("Generate Drill File"), wxDefaultPosition, wxDefaultSize, 0 );
bButtonsSizer->Add( m_buttonDrill, 0, wxALL|wxALIGN_CENTER_HORIZONTAL|wxEXPAND, 5 );
bMainSizer->Add( m_messagesBox, 1, wxBOTTOM|wxRIGHT|wxLEFT|wxEXPAND, 5 );
m_buttonQuit = new wxButton( this, wxID_CANCEL, _("Close"), wxDefaultPosition, wxDefaultSize, 0 );
bButtonsSizer->Add( m_buttonQuit, 0, wxALL|wxALIGN_CENTER_HORIZONTAL|wxEXPAND, 5 );
bMainSizer->Add( bButtonsSizer, 0, wxALIGN_BOTTOM|wxALL, 3 );
this->SetSizer( bMainSizer );
this->Layout();
......@@ -249,11 +312,12 @@ DIALOG_PLOT_BASE::DIALOG_PLOT_BASE( wxWindow* parent, wxWindowID id, const wxStr
this->Connect( wxEVT_CLOSE_WINDOW, wxCloseEventHandler( DIALOG_PLOT_BASE::OnCloseWindow ) );
this->Connect( wxEVT_INIT_DIALOG, wxInitDialogEventHandler( DIALOG_PLOT_BASE::OnInitDialog ) );
m_plotFormatOpt->Connect( wxEVT_COMMAND_RADIOBOX_SELECTED, wxCommandEventHandler( DIALOG_PLOT_BASE::SetPlotFormat ), NULL, this );
m_scaleOpt->Connect( wxEVT_COMMAND_CHOICE_SELECTED, wxCommandEventHandler( DIALOG_PLOT_BASE::OnSetScaleOpt ), NULL, this );
m_browseButton->Connect( wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler( DIALOG_PLOT_BASE::OnOutputDirectoryBrowseClicked ), NULL, this );
m_plotButton->Connect( wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler( DIALOG_PLOT_BASE::Plot ), NULL, this );
m_buttonSaveOpt->Connect( wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler( DIALOG_PLOT_BASE::applyPlotSettings ), NULL, this );
m_buttonDrill->Connect( wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler( DIALOG_PLOT_BASE::CreateDrillFile ), NULL, this );
m_buttonQuit->Connect( wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler( DIALOG_PLOT_BASE::OnQuit ), NULL, this );
m_browseButton->Connect( wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler( DIALOG_PLOT_BASE::OnOutputDirectoryBrowseClicked ), NULL, this );
}
DIALOG_PLOT_BASE::~DIALOG_PLOT_BASE()
......@@ -262,10 +326,11 @@ DIALOG_PLOT_BASE::~DIALOG_PLOT_BASE()
this->Disconnect( wxEVT_CLOSE_WINDOW, wxCloseEventHandler( DIALOG_PLOT_BASE::OnCloseWindow ) );
this->Disconnect( wxEVT_INIT_DIALOG, wxInitDialogEventHandler( DIALOG_PLOT_BASE::OnInitDialog ) );
m_plotFormatOpt->Disconnect( wxEVT_COMMAND_RADIOBOX_SELECTED, wxCommandEventHandler( DIALOG_PLOT_BASE::SetPlotFormat ), NULL, this );
m_scaleOpt->Disconnect( wxEVT_COMMAND_CHOICE_SELECTED, wxCommandEventHandler( DIALOG_PLOT_BASE::OnSetScaleOpt ), NULL, this );
m_browseButton->Disconnect( wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler( DIALOG_PLOT_BASE::OnOutputDirectoryBrowseClicked ), NULL, this );
m_plotButton->Disconnect( wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler( DIALOG_PLOT_BASE::Plot ), NULL, this );
m_buttonSaveOpt->Disconnect( wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler( DIALOG_PLOT_BASE::applyPlotSettings ), NULL, this );
m_buttonDrill->Disconnect( wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler( DIALOG_PLOT_BASE::CreateDrillFile ), NULL, this );
m_buttonQuit->Disconnect( wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler( DIALOG_PLOT_BASE::OnQuit ), NULL, this );
m_browseButton->Disconnect( wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler( DIALOG_PLOT_BASE::OnOutputDirectoryBrowseClicked ), NULL, this );
}
pcbnew/dialogs/dialog_plot_base.fbp
View file @ 73bdd76a
This source diff could not be displayed because it is too large. You can view the blob instead.
pcbnew/dialogs/dialog_plot_base.h
View file @ 73bdd76a
......@@ -11,15 +11,16 @@
#include <wx/intl.h>
#include <wx/string.h>
#include <wx/sizer.h>
#include <wx/statbox.h>
#include <wx/radiobox.h>
#include <wx/gdicmn.h>
#include <wx/checkbox.h>
#include <wx/font.h>
#include <wx/colour.h>
#include <wx/settings.h>
#include <wx/radiobox.h>
#include <wx/sizer.h>
#include <wx/statbox.h>
#include <wx/checkbox.h>
#include <wx/stattext.h>
#include <wx/choice.h>
#include <wx/textctrl.h>
#include <wx/button.h>
#include <wx/dialog.h>
......@@ -43,63 +44,65 @@ class DIALOG_PLOT_BASE : public wxDialog
ID_CREATE_DRILL_FILE,
};
wxRadioBox* m_plotFormatOpt;
wxStaticBoxSizer* m_CopperLayersBoxSizer;
wxStaticBoxSizer* m_TechnicalLayersBoxSizer;
wxCheckBox* m_useGerberExtensions;
wxCheckBox* m_excludeEdgeLayerOpt;
wxCheckBox* m_subtractMaskFromSilk;
wxCheckBox* m_plotSheetRef;
wxCheckBox* m_plotPads_on_Silkscreen;
wxCheckBox* m_plotModuleValueOpt;
wxCheckBox* m_plotModuleRefOpt;
wxCheckBox* m_plotTextOther;
wxCheckBox* m_plotInvisibleText;
wxRadioBox* m_drillShapeOpt;
wxRadioBox* m_scaleOpt;
wxRadioBox* m_plotModeOpt;
wxRadioBox* m_choicePlotOffset;
wxRadioBox* m_plotFormatOpt;
wxCheckBox* m_plotNoViaOnMaskOpt;
wxCheckBox* m_plotMirrorOpt;
wxStaticText* m_staticText11;
wxChoice* m_drillShapeOpt;
wxStaticText* m_staticText12;
wxChoice* m_scaleOpt;
wxStaticText* m_staticText13;
wxChoice* m_plotModeOpt;
wxStaticText* m_textDefaultPenSize;
wxTextCtrl* m_linesWidth;
wxCheckBox* m_useGerberExtensions;
wxCheckBox* m_excludeEdgeLayerOpt;
wxCheckBox* m_subtractMaskFromSilk;
wxCheckBox* m_useAuxOriginCheckBox;
wxStaticText* m_textPenSize;
wxTextCtrl* m_HPGLPenSizeOpt;
wxStaticText* m_staticText3;
wxTextCtrl* m_HPGLPenSpeedOpt;
wxStaticText* m_textPenOvr;
wxTextCtrl* m_HPGLPenOverlayOpt;
wxCheckBox* m_plotPSNegativeOpt;
wxCheckBox* m_plotMirrorOpt;
wxCheckBox* m_plotNoViaOnMaskOpt;
wxStaticText* m_staticText6;
wxTextCtrl* m_linesWidth;
wxStaticText* m_textPenSpeed;
wxTextCtrl* m_HPGLPenSpeedOpt;
wxStaticText* m_staticText7;
wxTextCtrl* m_fineAdjustXscaleOpt;
wxStaticText* m_staticText8;
wxTextCtrl* m_fineAdjustYscaleOpt;
wxButton* m_plotButton;
wxButton* m_buttonSaveOpt;
wxButton* m_buttonDrill;
wxButton* m_buttonQuit;
wxCheckBox* m_plotPSNegativeOpt;
wxStaticText* m_staticTextDir;
wxTextCtrl* m_outputDirectoryName;
wxButton* m_browseButton;
wxStaticText* m_staticText2;
wxTextCtrl* m_messagesBox;
wxButton* m_plotButton;
wxButton* m_buttonSaveOpt;
wxButton* m_buttonDrill;
wxButton* m_buttonQuit;
// Virtual event handlers, overide them in your derived class
virtual void OnCloseWindow( wxCloseEvent& event ) { event.Skip(); }
virtual void OnInitDialog( wxInitDialogEvent& event ) { event.Skip(); }
virtual void SetPlotFormat( wxCommandEvent& event ) { event.Skip(); }
virtual void OnSetScaleOpt( wxCommandEvent& event ) { event.Skip(); }
virtual void OnOutputDirectoryBrowseClicked( wxCommandEvent& event ) { event.Skip(); }
virtual void Plot( wxCommandEvent& event ) { event.Skip(); }
virtual void applyPlotSettings( wxCommandEvent& event ) { event.Skip(); }
virtual void CreateDrillFile( wxCommandEvent& event ) { event.Skip(); }
virtual void OnQuit( wxCommandEvent& event ) { event.Skip(); }
virtual void OnOutputDirectoryBrowseClicked( wxCommandEvent& event ) { event.Skip(); }
public:
DIALOG_PLOT_BASE( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("Plot"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxSize( 571,616 ), long style = wxDEFAULT_DIALOG_STYLE|wxRESIZE_BORDER );
DIALOG_PLOT_BASE( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("Plot"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxSize( 800,616 ), long style = wxDEFAULT_DIALOG_STYLE|wxRESIZE_BORDER );
~DIALOG_PLOT_BASE();
};
......
pcbnew/pcb_plot_params.cpp
View file @ 73bdd76a
......@@ -145,37 +145,6 @@ void PCB_PLOT_PARAMS::Parse( PCB_PLOT_PARAMS_PARSER* aParser ) throw( IO_ERROR,
}
PCB_PLOT_PARAMS& PCB_PLOT_PARAMS::operator=( const PCB_PLOT_PARAMS &aPcbPlotParams )
{
layerSelection = aPcbPlotParams.layerSelection;
useGerberExtensions = aPcbPlotParams.useGerberExtensions;
m_ExcludeEdgeLayer = aPcbPlotParams.m_ExcludeEdgeLayer;
m_PlotLineWidth = aPcbPlotParams.m_PlotLineWidth;
m_PlotFrameRef = aPcbPlotParams.m_PlotFrameRef;
m_PlotViaOnMaskLayer = aPcbPlotParams.m_PlotViaOnMaskLayer;
m_PlotMode = aPcbPlotParams.m_PlotMode;
useAuxOrigin = aPcbPlotParams.useAuxOrigin;
m_HPGLPenNum = aPcbPlotParams.m_HPGLPenNum;
m_HPGLPenSpeed = aPcbPlotParams.m_HPGLPenSpeed;
m_HPGLPenDiam = aPcbPlotParams.m_HPGLPenDiam;
m_HPGLPenOvr = aPcbPlotParams.m_HPGLPenOvr;
m_PlotPSColorOpt = aPcbPlotParams.m_PlotPSColorOpt;
m_PlotPSNegative = aPcbPlotParams.m_PlotPSNegative;
m_PlotReference = aPcbPlotParams.m_PlotReference;
m_PlotValue = aPcbPlotParams.m_PlotValue;
m_PlotTextOther = aPcbPlotParams.m_PlotTextOther;
m_PlotInvisibleTexts = aPcbPlotParams.m_PlotInvisibleTexts;
m_PlotPadsOnSilkLayer = aPcbPlotParams.m_PlotPadsOnSilkLayer;
subtractMaskFromSilk = aPcbPlotParams.subtractMaskFromSilk;
m_PlotFormat = aPcbPlotParams.m_PlotFormat;
m_PlotMirror = aPcbPlotParams.m_PlotMirror;
m_DrillShapeOpt = aPcbPlotParams.m_DrillShapeOpt;
scaleSelection = aPcbPlotParams.scaleSelection;
outputDirectory = aPcbPlotParams.outputDirectory;
return *this;
}
bool PCB_PLOT_PARAMS::operator==( const PCB_PLOT_PARAMS &aPcbPlotParams ) const
{
if( layerSelection != aPcbPlotParams.layerSelection )
......@@ -345,9 +314,6 @@ void PCB_PLOT_PARAMS_PARSER::Parse( PCB_PLOT_PARAMS* aPcbPlotParams ) throw( IO_
break;
case T_outputdirectory:
NeedSYMBOL();
// token = NextTok();
// if( token != T_STRING )
// Expecting( T_STRING );
aPcbPlotParams->outputDirectory = CONV_FROM_UTF8( CurText() );
break;
default:
......
pcbnew/pcb_plot_params.h
View file @ 73bdd76a
......@@ -99,7 +99,6 @@ public:
void Format( OUTPUTFORMATTER* aFormatter, int aNestLevel ) const throw( IO_ERROR );
void Parse( PCB_PLOT_PARAMS_PARSER* aParser ) throw( IO_ERROR, PARSE_ERROR );
PCB_PLOT_PARAMS& operator=( const PCB_PLOT_PARAMS &aPcbPlotParams);
bool operator==( const PCB_PLOT_PARAMS &aPcbPlotParams ) const;
bool operator!=( const PCB_PLOT_PARAMS &aPcbPlotParams ) const;
......
pcbnew/pcbplot.cpp
View file @ 73bdd76a
......@@ -118,14 +118,13 @@ void DIALOG_PLOT::Init_Dialog()
m_Config->Read( OPTKEY_YFINESCALE_ADJ, &m_YScaleAdjust );
m_plotFormatOpt->SetSelection( g_PcbPlotOptions.m_PlotFormat );
g_PcbPlotOptions.m_PlotLineWidth = g_DrawDefaultLineThickness;
// Set units and value for HPGL pen speed.
// Set units and value for HPGL pen size.
AddUnitSymbol( *m_textPenSize, g_UserUnit );
msg = ReturnStringFromValue( g_UserUnit, g_PcbPlotOptions.m_HPGLPenDiam, UNITS_MILS );
m_HPGLPenSizeOpt->AppendText( msg );
// Set units to cm for standard HPGL pen speed.
// Set units to cm/s for standard HPGL pen speed.
msg = ReturnStringFromValue( UNSCALED_UNITS, g_PcbPlotOptions.m_HPGLPenSpeed, 1 );
m_HPGLPenSpeedOpt->AppendText( msg );
......@@ -136,15 +135,13 @@ void DIALOG_PLOT::Init_Dialog()
UNITS_MILS );
m_HPGLPenOverlayOpt->AppendText( msg );
AddUnitSymbol( *m_textDefaultPenSize, g_UserUnit );
msg = ReturnStringFromValue( g_UserUnit,
g_PcbPlotOptions.m_PlotLineWidth,
PCB_INTERNAL_UNIT );
m_linesWidth->AppendText( msg );
if( g_PcbPlotOptions.GetUseAuxOrigin() )
m_choicePlotOffset->SetSelection( 1 );
else
m_choicePlotOffset->SetSelection( 0 );
m_useAuxOriginCheckBox->SetValue( g_PcbPlotOptions.GetUseAuxOrigin() );
// Test for a reasonable scale value. Set to 1 if problem
if( m_XScaleAdjust < MIN_SCALE || m_YScaleAdjust < MIN_SCALE
......@@ -159,7 +156,6 @@ void DIALOG_PLOT::Init_Dialog()
m_plotPSNegativeOpt->SetValue( g_PcbPlotOptions.m_PlotPSNegative );
// Create layer list.
int layer;
for( layer = 0; layer < NB_LAYERS; ++layer )
......@@ -175,7 +171,8 @@ void DIALOG_PLOT::Init_Dialog()
// List layers in same order than in setup layers dialog
// (Front or Top to Back or Bottom)
DECLARE_LAYERS_ORDER_LIST( layersOrder );
for( int layer_idx = 0; layer_idx < NB_LAYERS; ++layer_idx )
int layer_idx;
for( layer_idx = 0; layer_idx < NB_LAYERS; ++layer_idx )
{
layer = layersOrder[layer_idx];
......@@ -191,12 +188,10 @@ void DIALOG_PLOT::Init_Dialog()
m_TechnicalLayersBoxSizer->Add( m_BoxSelectLayer[layer],
0, wxGROW | wxALL, 1 );
long mask = 1 << layer;
if( g_PcbPlotOptions.GetLayerSelection() & mask )
if( g_PcbPlotOptions.GetLayerSelection() & ( 1 << layer ) )
m_BoxSelectLayer[layer]->SetValue( true );
}
// Option for using proper Gerber extensions
m_useGerberExtensions->SetValue( g_PcbPlotOptions.GetUseGerberExtensions() );
......@@ -213,7 +208,7 @@ void DIALOG_PLOT::Init_Dialog()
else
{
m_plotSheetRef->Enable( false );
g_PcbPlotOptions.m_PlotFrameRef = false;
m_plotSheetRef->SetValue( false );
}
// Option to plot pads on silkscreen layers or all layers
......@@ -241,15 +236,7 @@ void DIALOG_PLOT::Init_Dialog()
m_plotNoViaOnMaskOpt->SetValue( g_PcbPlotOptions.m_PlotViaOnMaskLayer );
// Output directory
if( g_PcbPlotOptions.GetOutputDirectory().IsEmpty() )
{
fileName = m_Parent->GetScreen()->GetFileName();
m_outputDirectoryName->SetValue( fileName.GetPath() );
}
else
{
m_outputDirectoryName->SetValue( g_PcbPlotOptions.GetOutputDirectory() );
}
// Update options values:
wxCommandEvent cmd_event;
......@@ -293,13 +280,27 @@ void DIALOG_PLOT::OnSetScaleOpt( wxCommandEvent& event )
void DIALOG_PLOT::OnOutputDirectoryBrowseClicked( wxCommandEvent& event )
{
wxString currentDir;
wxDirDialog dirDialog( this, _( "Select Output Directory" ),
m_outputDirectoryName->GetValue() );
currentDir = m_outputDirectoryName->GetValue();
wxDirDialog dirDialog( this, _( "Select Output Directory" ), currentDir );
if( dirDialog.ShowModal() == wxID_CANCEL )
return;
m_outputDirectoryName->SetValue( dirDialog.GetPath() );
wxFileName dirName = wxFileName::DirName( dirDialog.GetPath() );
wxMessageDialog dialog( this, wxT( "Use a relative path? "),
wxT( "Plot Output Directory" ),
wxYES_NO | wxICON_QUESTION | wxYES_DEFAULT );
if( dialog.ShowModal() == wxID_YES ) {
wxString boardFilePath = ( (wxFileName) m_Parent->GetScreen()->GetFileName()).GetPath();
if( !dirName.MakeRelativeTo( boardFilePath ) )
wxMessageBox( wxT( "Cannot make path relative (target volume different from board file volume)!" ),
wxT( "Plot Output Directory" ), wxICON_ERROR );
}
m_outputDirectoryName->SetValue( dirName.GetFullPath() );
}
......@@ -314,7 +315,7 @@ void DIALOG_PLOT::SetPlotFormat( wxCommandEvent& event )
m_drillShapeOpt->Enable( true );
m_plotModeOpt->Enable( true );
m_plotMirrorOpt->Enable( true );
m_choicePlotOffset->Enable( false );
m_useAuxOriginCheckBox->Enable( false );
m_linesWidth->Enable( true );
m_HPGLPenSizeOpt->Enable( false );
m_HPGLPenSpeedOpt->Enable( false );
......@@ -335,7 +336,7 @@ void DIALOG_PLOT::SetPlotFormat( wxCommandEvent& event )
m_plotModeOpt->Enable( false );
m_plotMirrorOpt->SetValue( false );
m_plotMirrorOpt->Enable( false );
m_choicePlotOffset->Enable( true );
m_useAuxOriginCheckBox->Enable( true );
m_linesWidth->Enable( true );
m_HPGLPenSizeOpt->Enable( false );
m_HPGLPenSpeedOpt->Enable( false );
......@@ -355,7 +356,7 @@ void DIALOG_PLOT::SetPlotFormat( wxCommandEvent& event )
m_plotMirrorOpt->Enable( true );
m_drillShapeOpt->Enable( false );
m_plotModeOpt->Enable( true );
m_choicePlotOffset->Enable( false );
m_useAuxOriginCheckBox->Enable( false );
m_linesWidth->Enable( false );
m_HPGLPenSizeOpt->Enable( true );
m_HPGLPenSpeedOpt->Enable( true );
......@@ -376,7 +377,7 @@ void DIALOG_PLOT::SetPlotFormat( wxCommandEvent& event )
m_plotMirrorOpt->SetValue( false );
m_drillShapeOpt->Enable( false );
m_plotModeOpt->Enable( true );
m_choicePlotOffset->Enable( false );
m_useAuxOriginCheckBox->Enable( false );
m_linesWidth->Enable( false );
m_HPGLPenSizeOpt->Enable( false );
m_HPGLPenSpeedOpt->Enable( false );
......@@ -411,10 +412,7 @@ void DIALOG_PLOT::applyPlotSettings( wxCommandEvent& event )
tempOptions.m_PlotPadsOnSilkLayer = m_plotPads_on_Silkscreen->GetValue();
if( m_choicePlotOffset->GetSelection() == 0 )
tempOptions.SetUseAuxOrigin( false );
else
tempOptions.SetUseAuxOrigin( true );
tempOptions.SetUseAuxOrigin( m_useAuxOriginCheckBox->GetValue() );
tempOptions.m_PlotValue = m_plotModuleValueOpt->GetValue();
tempOptions.m_PlotReference = m_plotModuleRefOpt->GetValue();
......@@ -444,17 +442,16 @@ void DIALOG_PLOT::applyPlotSettings( wxCommandEvent& event )
msg = m_linesWidth->GetValue();
tmp = ReturnValueFromString( g_UserUnit, msg, PCB_INTERNAL_UNIT );
tempOptions.m_PlotLineWidth = tmp;
g_DrawDefaultLineThickness = tempOptions.m_PlotLineWidth;
msg = m_fineAdjustXscaleOpt->GetValue();
msg.ToDouble( &m_XScaleAdjust );
msg = m_fineAdjustYscaleOpt->GetValue();
msg.ToDouble( &m_YScaleAdjust );
tempOptions.SetUseGerberExtensions( m_useGerberExtensions->GetValue() );
m_Config->Write( OPTKEY_XFINESCALE_ADJ, m_XScaleAdjust );
m_Config->Write( OPTKEY_YFINESCALE_ADJ, m_YScaleAdjust );
tempOptions.SetUseGerberExtensions( m_useGerberExtensions->GetValue() );
tempOptions.m_PlotFormat = m_plotFormatOpt->GetSelection();
long selectedLayers = 0;
......@@ -471,7 +468,11 @@ void DIALOG_PLOT::applyPlotSettings( wxCommandEvent& event )
tempOptions.m_PlotPSNegative = m_plotPSNegativeOpt->GetValue();
tempOptions.SetOutputDirectory( m_outputDirectoryName->GetValue() );
// Set output directory and replace backslashes with forward ones
wxString dirStr;
dirStr = m_outputDirectoryName->GetValue();
dirStr.Replace( wxT( "\\" ), wxT( "/" ) );
tempOptions.SetOutputDirectory( dirStr );
if( g_PcbPlotOptions != tempOptions )
{
......@@ -492,17 +493,30 @@ void DIALOG_PLOT::Plot( wxCommandEvent& event )
applyPlotSettings( event );
// Create output directory if it does not exist
if( !wxFileName::DirExists( m_outputDirectoryName->GetValue() ) )
wxFileName outputDir = wxFileName::DirName( m_outputDirectoryName->GetValue() );
wxString boardFilePath = ( (wxFileName) m_Parent->GetScreen()->GetFileName()).GetPath();
if( !outputDir.MakeAbsolute( boardFilePath ) )
{
wxString msg;
msg.Printf( wxT( " Cannot make %s absolute with respect to %s!" ),
GetChars( outputDir.GetPath() ),
GetChars( boardFilePath ) );
wxMessageBox( msg, wxT( "Plot" ), wxICON_ERROR );
return;
}
if( !wxFileName::DirExists( outputDir.GetPath() ) )
{
if( wxMkdir( m_outputDirectoryName->GetValue() ) )
if( wxMkdir( outputDir.GetPath() ) )
{
wxString msg;
msg.Printf( _( "Directory %s created.\n" ), GetChars( m_outputDirectoryName->GetValue() ) );
msg.Printf( wxT( "Directory %s created.\n" ), GetChars( outputDir.GetPath() ) );
m_messagesBox->AppendText( msg );
}
else
{
wxMessageBox( _( "Cannot create output directory!" ), _( "Plot" ), wxICON_INFORMATION );
wxMessageBox( wxT( "Cannot create output directory!" ), wxT( "Plot" ), wxICON_ERROR );
return;
}
}
......@@ -581,7 +595,7 @@ void DIALOG_PLOT::Plot( wxCommandEvent& event )
if( m_BoxSelectLayer[layer]->GetValue() )
{
fn = m_Parent->GetScreen()->GetFileName();
fn.SetPath( m_outputDirectoryName->GetValue() );
fn.SetPath( outputDir.GetPath() );
// Create file name.
wxString layername = board->GetLayerName( layer );
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment