Skip to content

K
kicad-source-mirror
Commit 701fa6b0 authored by Dick Hollenbeck's avatar Dick Hollenbeck
Browse files
Options

intermediate check in to show progress on new nanometer file loader PLUGIN

parent 2515a806
Show whitespace changes
Inline Side-by-side
Showing with 1112 additions and 202 deletions
Doxyfile
View file @ 701fa6b0
......@@ -88,7 +88,7 @@ INPUT_ENCODING = UTF-8
FILE_PATTERNS = *.h \
*.cpp
RECURSIVE = YES
EXCLUDE = include\boost
EXCLUDE = include/boost polygon/kbool
EXCLUDE_SYMLINKS = NO
EXCLUDE_PATTERNS =
EXCLUDE_SYMBOLS =
......
include/class_via_dimension.h deleted 100644 → 0
View file @ 2515a806
/**
* @file class_via_dimension.h
* @brief Class via dimension.
*/
#ifndef CLASS_VIA_DIMENSION_H
#define CLASS_VIA_DIMENSION_H
#include "lengthpcb.h"
/** a small helper class to handle a stock of specific vias diameter and drill pair
* in the BOARD class
*/
class VIA_DIMENSION
{
public:
LENGTH_PCB m_Diameter; // <= 0 means use Netclass via diameter
LENGTH_PCB m_Drill; // <= 0 means use Netclass via drill
VIA_DIMENSION()
{
m_Diameter = FROM_LEGACY_LU( 0 );
m_Drill = FROM_LEGACY_LU( 0 );
}
bool operator ==( const VIA_DIMENSION& other ) const
{
return (m_Diameter == other.m_Diameter) && (m_Drill == other.m_Drill);
}
bool operator <( const VIA_DIMENSION& other ) const
{
if( m_Diameter != other.m_Diameter )
return m_Diameter < other.m_Diameter;
return m_Drill < other.m_Drill;
}
};
#endif /* CLASS_VIA_DIMENSION_H */
\ No newline at end of file
include/common.h
View file @ 701fa6b0
......@@ -217,7 +217,7 @@ extern int g_GhostColor;
* This is wrapper to the C setlocale( LC_NUMERIC, "C" ) function,
* but could make more easier an optional use of locale in KiCad
*/
void SetLocaleTo_C_standard( void );
void SetLocaleTo_C_standard();
/**
* Function SetLocaleTo_Default
......@@ -230,8 +230,21 @@ void SetLocaleTo_C_standard( void );
* This is wrapper to the C setlocale( LC_NUMERIC, "" ) function,
* but could make more easier an optional use of locale in KiCad
*/
void SetLocaleTo_Default( void );
void SetLocaleTo_Default();
/**
* Class LOCALE_IO
* is a class that can be instantiated within a scope in which you are expecting
* exceptions to be thrown. Its constructor calls SetLocaleTo_C_Standard().
* Its destructor insures that the default locale is restored if an exception
* is thrown, or not.
*/
class LOCALE_IO
{
public:
LOCALE_IO() { SetLocaleTo_C_standard(); }
~LOCALE_IO() { SetLocaleTo_Default(); }
};
/**
* Function EnsureTextCtrlWidth
......
pcbnew/class_board.h
View file @ 701fa6b0
......@@ -80,28 +80,34 @@ struct LAYER
};
/** a small helper class to handle a stock of specific vias diameter and drill pair
* in the BOARD class
/**
* Struct VIA_DIMENSION
* is a small helper container to handle a stock of specific vias each with
* unique diameter and drill sizes in the BOARD class.
*/
class VIA_DIMENSION
struct VIA_DIMENSION
{
public:
int m_Diameter; // <= 0 means use Netclass via diameter
int m_Drill; // <= 0 means use Netclass via drill
VIA_DIMENSION()
{
m_Diameter = 0; m_Drill = 0;
m_Diameter = 0;
m_Drill = 0;
}
VIA_DIMENSION( int aDiameter, int aDrill )
{
m_Diameter = aDiameter;
m_Drill = aDrill;
}
bool operator ==( const VIA_DIMENSION& other ) const
bool operator == ( const VIA_DIMENSION& other ) const
{
return (m_Diameter == other.m_Diameter) && (m_Drill == other.m_Drill);
}
bool operator <( const VIA_DIMENSION& other ) const
bool operator < ( const VIA_DIMENSION& other ) const
{
if( m_Diameter != other.m_Diameter )
return m_Diameter < other.m_Diameter;
......
pcbnew/class_drawsegment.h
View file @ 701fa6b0
......@@ -3,8 +3,8 @@
* @brief Class to handle a graphic segment.
*/
#ifndef CLASS_DRAWSEGMENT_H
#define CLASS_DRAWSEGMENT_H
#ifndef CLASS_DRAWSEGMENT_H_
#define CLASS_DRAWSEGMENT_H_
#include "class_board_item.h"
......@@ -40,6 +40,21 @@ public:
DRAWSEGMENT* Next() const { return (DRAWSEGMENT*) Pnext; }
DRAWSEGMENT* Back() const { return (DRAWSEGMENT*) Pback; }
void SetWidth( int aWidth ) { m_Width = aWidth; }
void SetStart( const wxPoint& aStart ) { m_Start = aStart; }
void SetEnd( const wxPoint& aEnd ) { m_End = aEnd; }
void SetAngle( double aAngle ) { m_Angle = (int) aAngle; }
void SetType( int aType ) { m_Type = aType; }
void SetShape( int aShape ) { m_Shape = aShape; }
void SetBezControl1( const wxPoint& aPoint ) { m_BezierC1 = aPoint; }
void SetBezControl2( const wxPoint& aPoint ) { m_BezierC2 = aPoint; }
/**
* Function GetPosition
* returns the position of this object.
......@@ -85,6 +100,16 @@ public:
std::vector<wxPoint>& GetBezierPoints() { return m_BezierPoints; };
std::vector<wxPoint>& GetPolyPoints() { return m_PolyPoints; };
void SetBezierPoints( std::vector<wxPoint>& aPoints )
{
m_BezierPoints = aPoints;
}
void SetPolyPoints( std::vector<wxPoint>& aPoints )
{
m_PolyPoints = aPoints;
}
/**
* Function Save
* writes the data structures for this object out to a FILE in "*.brd" format.
......@@ -158,7 +183,7 @@ public:
{
wxPoint delta = GetEnd() - GetStart();
return hypot( delta.x, delta.y );
return hypot( double( delta.x ), double( delta.y ) );
}
......@@ -212,9 +237,7 @@ public:
#if defined(DEBUG)
void Show( int nestLevel, std::ostream& os );
#endif
};
#endif // #ifndef CLASS_DRAWSEGMENT_H
#endif // CLASS_DRAWSEGMENT_H_
pcbnew/files.cpp
View file @ 701fa6b0
......@@ -44,6 +44,7 @@
#include "pcbnew.h"
#include "protos.h"
#include "pcbnew_id.h"
#include "io_mgr.h"
#include "class_board.h"
......@@ -150,7 +151,6 @@ void PCB_EDIT_FRAME::Files_io( wxCommandEvent& event )
bool PCB_EDIT_FRAME::LoadOnePcbFile( const wxString& aFileName, bool aAppend,
bool aForceFileDialog )
{
FILE* source;
wxString msg;
if( GetScreen()->IsModify() && !aAppend )
......@@ -199,8 +199,9 @@ the changes?" ) ) )
GetScreen()->SetFileName( fileName.GetFullPath() );
#if 1
// Start read PCB file
source = wxFopen( GetScreen()->GetFileName(), wxT( "rt" ) );
FILE* source = wxFopen( GetScreen()->GetFileName(), wxT( "rt" ) );
if( source == NULL )
{
......@@ -257,6 +258,41 @@ this file again." ) );
LoadProjectSettings( GetScreen()->GetFileName() );
}
#else
if( !aAppend )
{
// Update the option toolbar
m_DisplayPcbTrackFill = DisplayOpt.DisplayPcbTrackFill;
m_DisplayModText = DisplayOpt.DisplayModText;
m_DisplayModEdge = DisplayOpt.DisplayModEdge;
m_DisplayPadFill = DisplayOpt.DisplayPadFill;
m_DisplayViaFill = DisplayOpt.DisplayViaFill;
}
try
{
// load or append either:
BOARD* board = IO_MGR::Load( IO_MGR::KICAD, GetScreen()->GetFileName(),
aAppend ? GetBoard() : NULL,
NULL );
if( !aAppend )
SetBoard( board );
}
catch ( IO_ERROR ioe )
{
// @todo
printf( "Error loading board: %s\n", TO_UTF8( ioe.errorText ) );
}
if( !aAppend )
{
LoadProjectSettings( GetScreen()->GetFileName() );
}
#endif
GetScreen()->ClrModify();
/* If append option: change the initial board name to <oldname>-append.brd */
......
pcbnew/io_mgr.h
View file @ 701fa6b0
......@@ -117,16 +117,9 @@ public:
* is a base class that BOARD loading and saving plugins should derive from.
* Implementations can provide either Load() or Save() functions, or both.
* PLUGINs throw exceptions, so it is best that you wrap your calls to these
* functions in a try catch block, and also do the switching to stardard C locale
* and back, outside the region in which an exception can be thrown. This means
* the PLUGINs do not deal with the locale, the caller does.
* functions in a try catch block.
*
* <pre>
*
* // Switch the locale to standard C (needed to read floating point numbers
* // like 1.3)
*
* SetLocaleTo_C_standard();
* try
* {
* pi->Load(...);
......@@ -135,8 +128,6 @@ public:
* {
* // grab text from ioe, show in error window.
* }
* SetLocaleTo_Default(); // revert to the current locale
*
* </pre>
*/
class PLUGIN
......
pcbnew/kicad_plugin.cpp
View file @ 701fa6b0
......@@ -29,18 +29,18 @@
#include <math.h>
#include <stdio.h>
#include <string.h>
#include <errno.h>
#include <kicad_plugin.h> // I implement this
#include <auto_ptr.h>
#include <kicad_string.h>
#include <macros.h>
//#include <fctsys.h>
//#include <confirm.h>
//#include <build_version.h>
//#include <wxPcbStruct.h">
//#include <macros.h>
//#include <pcbcommon.h>
#include <zones.h>
......@@ -58,13 +58,13 @@
#include <class_drawsegment.h>
#include <class_mire.h>
#include <3d_struct.h>
#include <pcb_plot_params.h>
/*
#include <pcbnew.h>
#include <pcbnew_id.h>
#include <autorout.h>
#include <pcb_plot_params.h>
*/
......@@ -121,92 +121,102 @@
#define MM_PER_BIU 1e-6
#define UM_PER_BIU 1e-3
/// Test for a specific length of characters.
/// The -1 is to omit the trailing \0 which is included in sizeof() on a
/// string.
#define TESTLINE( x ) (strncmp( line, x, sizeof(x) - 1 ) == 0)
/// Get the length of a constant string, at compile time
#define SZ( x ) (sizeof(x)-1)
using namespace std;
using namespace std; // auto_ptr
BOARD* KICAD_PLUGIN::Load( const wxString& aFileName, BOARD* aAppendToMe, PROPERTIES* aProperties )
{
LOCALE_IO toggle; // toggles on then off the C locale.
wxString msg;
BOARD* board = aAppendToMe ? aAppendToMe : new BOARD( NULL );
// delete on exception, iff I own it, according to aAppendToMe
auto_ptr<BOARD> deleter( aAppendToMe ? NULL : board );
m_board = aAppendToMe ? aAppendToMe : new BOARD( NULL );
// delete on exception, iff I own m_board, according to aAppendToMe
auto_ptr<BOARD> deleter( aAppendToMe ? NULL : m_board );
FILE* fp = wxFopen( aFileName, wxT( "rt" ) );
if( !fp )
{
msg.Printf( _( "Unable to open file '%s'" ), aFileName.GetData() );
THROW_IO_ERROR( msg );
m_error.Printf( _( "Unable to open file '%s'" ), aFileName.GetData() );
THROW_IO_ERROR( m_error );
}
FILE_LINE_READER reader( fp, aFileName );
aReader = &reader;
init( board, aProperties );
init( aProperties );
loadAllSections( bool( aAppendToMe ) );
deleter.release();
return m_board;
}
void KICAD_PLUGIN::loadAllSections( bool doAppend )
{
// $GENERAL section is first
// $SHEETDESCR section is next
// $SETUP section is next
// Put a dollar sign in front, and test for a specific length of characters
// The -1 is to omit the trailing \0 which is included in sizeof() on a
// string.
#define TESTLINE( x ) (strncmp( line, "$" x, sizeof("$" x) - 1 ) == 0)
// Then follows $EQUIPOT and all the rest
while( aReader->ReadLine() )
{
char* line = aReader->Line();
// put the more frequent ones at the top
// put the more frequent ones at the top, but realize TRACKs are loaded as a group
if( TESTLINE( "MODULE" ) )
if( TESTLINE( "$MODULE" ) )
{
MODULE* module = new MODULE( board );
board->Add( module, ADD_APPEND );
load( module );
continue;
loadMODULE();
}
if( TESTLINE( "DRAWSEGMENT" ) )
else if( TESTLINE( "$DRAWSEGMENT" ) )
{
DRAWSEGMENT* dseg = new DRAWSEGMENT( board );
board->Add( dseg, ADD_APPEND );
load( dseg );
continue;
loadDRAWSEGMENT();
}
if( TESTLINE( "EQUIPOT" ) )
else if( TESTLINE( "$EQUIPOT" ) )
{
NETINFO_ITEM* net = new NETINFO_ITEM( board );
board->m_NetInfo->AppendNet( net );
load( net );
continue;
loadNETINFO_ITEM();
}
if( TESTLINE( "TEXTPCB" ) )
else if( TESTLINE( "$TEXTPCB" ) )
{
TEXTE_PCB* pcbtxt = new TEXTE_PCB( board );
board->Add( pcbtxt, ADD_APPEND );
load( pcbtxt );
continue;
loadPCB_TEXTE();
}
if( TESTLINE( "TRACK" ) )
#if 0
else if( TESTLINE( "$TRACK" ) )
{
#if 0 && defined(PCBNEW)
TRACK* insertBeforeMe = Append ? NULL : board->m_Track.GetFirst();
TRACK* insertBeforeMe = Append ? NULL : m_board->m_Track.GetFirst();
ReadListeSegmentDescr( aReader, insertBeforeMe, PCB_TRACE_T, NbTrack );
#endif
continue;
}
if( TESTLINE( BRD_NETCLASS ) )
else if( TESTLINE( BRD_NETCLASS ) )
{
/*
// create an empty NETCLASS without a name.
NETCLASS* netclass = new NETCLASS( board, wxEmptyString );
NETCLASS* netclass = new NETCLASS( m_board, wxEmptyString );
// fill it from the *.brd file, and establish its name.
netclass->ReadDescr( aReader );
if( !board->m_NetClasses.Add( netclass ) )
if( !m_board->m_NetClasses.Add( netclass ) )
{
// Must have been a name conflict, this is a bad board file.
// User may have done a hand edit to the file.
......@@ -216,66 +226,61 @@ BOARD* KICAD_PLUGIN::Load( const wxString& aFileName, BOARD* aAppendToMe, PROPER
// @todo: throw an exception here, this is a bad board file.
}
*/
continue;
}
if( TESTLINE( "CZONE_OUTLINE" ) )
else if( TESTLINE( "$CZONE_OUTLINE" ) )
{
auto_ptr<ZONE_CONTAINER> zone_descr( new ZONE_CONTAINER( board ) );
auto_ptr<ZONE_CONTAINER> zone_descr( new ZONE_CONTAINER( m_board ) );
load( zone_descr.get() );
if( zone_descr->GetNumCorners() > 2 ) // should always occur
board->Add( zone_descr.release() );
m_board->Add( zone_descr.release() );
// else delete zone_descr; done by auto_ptr
continue;
}
if( TESTLINE( "COTATION" ) )
else if( TESTLINE( "$COTATION" ) )
{
DIMENSION* dim = new DIMENSION( board );
board->Add( dim, ADD_APPEND );
DIMENSION* dim = new DIMENSION( m_board );
m_board->Add( dim, ADD_APPEND );
load( dim );
continue;
}
if( TESTLINE( "PCB_TARGET" ) )
else if( TESTLINE( "$PCB_TARGET" ) )
{
PCB_TARGET* t = new PCB_TARGET( board );
board->Add( t, ADD_APPEND );
PCB_TARGET* t = new PCB_TARGET( m_board );
m_board->Add( t, ADD_APPEND );
load( t );
continue;
}
if( TESTLINE( "ZONE" ) )
else if( TESTLINE( "$ZONE" ) )
{
#if 0 && defined(PCBNEW)
SEGZONE* insertBeforeMe = Append ? NULL : board->m_Zone.GetFirst();
SEGZONE* insertBeforeMe = Append ? NULL : m_board->m_Zone.GetFirst();
ReadListeSegmentDescr( aReader, insertBeforeMe, PCB_ZONE_T, NbZone );
#endif
continue;
}
#endif
if( TESTLINE( "GENERAL" ) )
else if( TESTLINE( "$GENERAL" ) )
{
loadGeneral( board );
continue;
loadGENERAL();
}
if( TESTLINE( "SHEETDESCR" ) )
else if( TESTLINE( "$SHEETDESCR" ) )
{
loadSheet( board );
continue;
loadSHEET();
}
if( TESTLINE( "SETUP" ) )
else if( TESTLINE( "$SETUP" ) )
{
if( !aAppendToMe )
if( !doAppend )
{
loadSetup( board );
loadSETUP();
}
else
{
......@@ -283,34 +288,589 @@ BOARD* KICAD_PLUGIN::Load( const wxString& aFileName, BOARD* aAppendToMe, PROPER
{
line = aReader->Line();
if( TESTLINE( "EndSETUP" ) )
if( TESTLINE( "$EndSETUP" ) )
break;
}
}
continue;
}
if( TESTLINE( "EndPCB" ) )
else if( TESTLINE( "$EndPCB" ) )
break;
}
}
void KICAD_PLUGIN::loadGENERAL()
{
static const char delims[] = " =\n\r"; // for this function only.
while( aReader->ReadLine() )
{
char* line = aReader->Line();
const char* data;
if( TESTLINE( "$EndGENERAL" ) )
break;
if( TESTLINE( "Units" ) )
{
// what are the engineering units of the dimensions in the BOARD?
data = strtok( line + SZ("Units"), delims );
if( strcmp( data, "mm" ) == 0 )
{
#if defined(KICAD_NANOMETRE)
diskToBiu = 1000000.0;
#else
m_error = wxT( "May not load new *.brd file into 'PCBNew compiled for deci-mils'" );
THROW_IO_ERROR( m_error );
#endif
}
}
else if( TESTLINE( "EnabledLayers" ) )
{
int enabledLayers = 0;
data = strtok( line + SZ( "EnabledLayers" ), delims );
sscanf( data, "%X", &enabledLayers );
// Setup layer visibility
m_board->SetEnabledLayers( enabledLayers );
}
else if( TESTLINE( "Ly" ) ) // Old format for Layer count
{
int layer_mask = 1;
data = strtok( line + SZ( "Ly" ), delims );
sscanf( data, "%X", &layer_mask );
int layer_count = 0;
for( int ii = 0; ii < NB_COPPER_LAYERS && layer_mask; ++ii, layer_mask >>= 1 )
{
if( layer_mask & 1 )
layer_count++;
}
m_board->SetCopperLayerCount( layer_count );
}
else if( TESTLINE( "BoardThickness" ) )
{
data = strtok( line + SZ( "BoardThickness" ), delims );
m_board->GetBoardDesignSettings()->m_BoardThickness = atoi( data );
}
else if( TESTLINE( "Links" ) )
{
// Info only, do nothing, but only for a short while.
}
else if( TESTLINE( "NoConn" ) )
{
data = strtok( line + SZ( "NoConn" ), delims );
m_board->m_NbNoconnect = atoi( data );
}
else if( TESTLINE( "Di" ) )
{
// skip the first token "Di".
// no use of strtok() in this one, don't want the nuls
data = line + SZ( "Di" );
BIU x1 = biuParse( data, &data );
BIU y1 = biuParse( data, &data );
BIU x2 = biuParse( data, &data );
BIU y2 = biuParse( data );
m_board->m_BoundaryBox.SetX( x1 );
m_board->m_BoundaryBox.SetY( y1 );
m_board->m_BoundaryBox.SetWidth( x2 - x1 );
m_board->m_BoundaryBox.SetHeight( y2 - y1 );
}
// Read the number of segments of type DRAW, TRACK, ZONE
else if( TESTLINE( "Ndraw" ) )
{
data = strtok( line + SZ( "Ndraw" ), delims );
NbDraw = atoi( data );
}
else if( TESTLINE( "Ntrack" ) )
{
data = strtok( line + SZ( "Ntrack" ), delims );
NbTrack = atoi( data );
}
else if( TESTLINE( "Nzone" ) )
{
data = strtok( line + SZ( "Nzone" ), delims );
NbZone = atoi( data );
}
else if( TESTLINE( "Nmodule" ) )
{
data = strtok( line + SZ( "Nmodule" ), delims );
NbMod = atoi( data );
}
else if( TESTLINE( "Nnets" ) )
{
data = strtok( line + SZ( "Nnets" ), delims );
NbNets = atoi( data );
}
}
m_error = wxT( "Missing '$EndGENERAL'" );
THROW_IO_ERROR( m_error );
}
void KICAD_PLUGIN::loadSHEET()
{
char buf[260];
char* text;
static const char delims[] = " \t\n\r"; // for this function only.
while( aReader->ReadLine() )
{
char* line = aReader->Line();
if( TESTLINE( "$End" ) )
return;
else if( TESTLINE( "Sheet" ) )
{
text = strtok( line, delims );
text = strtok( NULL, delims );
Ki_PageDescr* sheet = g_SheetSizeList[0];
int ii;
for( ii = 0; sheet != NULL; ii++, sheet = g_SheetSizeList[ii] )
{
if( stricmp( TO_UTF8( sheet->m_Name ), text ) == 0 )
{
// screen->m_CurrentSheetDesc = sheet;
if( sheet == &g_Sheet_user )
{
text = strtok( NULL, delims );
if( text )
sheet->m_Size.x = atoi( text );
text = strtok( NULL, delims );
if( text )
sheet->m_Size.y = atoi( text );
}
break;
}
}
}
else if( TESTLINE( "Title" ) )
{
ReadDelimitedText( buf, line, sizeof(buf) );
#if 0 // @todo "screen" not available here
screen->m_Title = FROM_UTF8( buf );
}
else if( TESTLINE( "Date" ) )
{
ReadDelimitedText( buf, line, sizeof(buf) );
screen->m_Date = FROM_UTF8( buf );
}
else if( TESTLINE( "Rev" ) )
{
ReadDelimitedText( buf, line, sizeof(buf) );
screen->m_Revision = FROM_UTF8( buf );
}
else if( TESTLINE( "Comp" ) )
{
ReadDelimitedText( buf, line, sizeof(buf) );
screen->m_Company = FROM_UTF8( buf );
}
else if( TESTLINE( "Comment1" ) )
{
ReadDelimitedText( buf, line, sizeof(buf) );
screen->m_Commentaire1 = FROM_UTF8( buf );
}
else if( TESTLINE( "Comment2" ) )
{
ReadDelimitedText( buf, line, sizeof(buf) );
screen->m_Commentaire2 = FROM_UTF8( buf );
}
else if( TESTLINE( "Comment3" ) )
{
ReadDelimitedText( buf, line, sizeof(buf) );
screen->m_Commentaire3 = FROM_UTF8( buf );
}
deleter.release(); // no exceptions possible between here and return
return board;
else if( TESTLINE( "Comment4" ) )
{
ReadDelimitedText( buf, line, sizeof(buf) );
screen->m_Commentaire4 = FROM_UTF8( buf );
#endif
}
}
m_error = wxT( "Missing '$EndSHEETDESCR'" );
THROW_IO_ERROR( m_error );
}
void KICAD_PLUGIN::load( MODULE* me )
void KICAD_PLUGIN::loadSETUP()
{
NETCLASS* netclass_default = m_board->m_NetClasses.GetDefault();
static const char delims[] = " =\n\r"; // this function only
while( aReader->ReadLine() )
{
char* line = aReader->Line();
const char* data;
if( TESTLINE( "PcbPlotParams" ) )
{
PCB_PLOT_PARAMS_PARSER parser( &line[13], aReader->GetSource() );
try
{
g_PcbPlotOptions.Parse( &parser );
}
catch( IO_ERROR& e )
{
wxString msg;
msg.Printf( _( "Error reading PcbPlotParams from %s:\n%s" ),
aReader->GetSource().GetData(),
e.errorText.GetData() );
wxMessageBox( msg, _( "Open Board File" ), wxICON_ERROR );
}
continue;
}
strtok( line, delims );
data = strtok( NULL, delims );
if( TESTLINE( "$EndSETUP" ) )
{
// Until such time as the *.brd file does not have the
// global parameters:
// "TrackWidth", "TrackMinWidth", "ViaSize", "ViaDrill",
// "ViaMinSize", and "TrackClearence", put those same global
// values into the default NETCLASS until later board load
// code should override them. *.brd files which have been
// saved with knowledge of NETCLASSes will override these
// defaults, old boards will not.
//
// @todo: I expect that at some point we can remove said global
// parameters from the *.brd file since the ones in the
// default netclass serve the same purpose. If needed
// at all, the global defaults should go into a preferences
// file instead so they are there to start new board
// projects.
m_board->m_NetClasses.GetDefault()->SetParams();
return;
}
else if( TESTLINE( "AuxiliaryAxisOrg" ) )
{
BIU gx = biuParse( data, &data );
BIU gy = biuParse( data );
/* @todo
m_Auxiliary_Axis_Position.x = gx;
m_Auxiliary_Axis_Position.y = gy;
*/
}
#if defined(PCBNEW)
else if( TESTLINE( "Layers" ) == 0 )
{
int tmp = atoi( data );
m_board->SetCopperLayerCount( tmp );
}
else if( TESTLINE( "Layer[" ) )
{
const int LAYERKEYZ = sizeof("Layer[") - 1;
// parse:
// Layer[n] <a_Layer_name_with_no_spaces> <LAYER_T>
char* cp = line + LAYERKEYZ;
int layer = atoi( cp );
if( data )
{
wxString layerName = FROM_UTF8( data );
m_board->SetLayerName( layer, layerName );
data = strtok( NULL, delims );
if( data ) // optional in old board files
{
LAYER_T type = LAYER::ParseType( data );
m_board->SetLayerType( layer, type );
}
}
}
/* no more used
else if( TESTLINE( "TrackWidth" ) == 0 )
{
}
else if( TESTLINE( "ViaSize" ) )
{
}
else if( TESTLINE( "MicroViaSize" ) == 0 )
{
}
*/
else if( TESTLINE( "TrackWidthList" ) )
{
BIU tmp = biuParse( data );
m_board->m_TrackWidthList.push_back( tmp );
}
else if( TESTLINE( "TrackClearence" ) )
{
BIU tmp = biuParse( data );
netclass_default->SetClearance( tmp );
}
else if( TESTLINE( "TrackMinWidth" ) )
{
BIU tmp = biuParse( data );
m_board->GetBoardDesignSettings()->m_TrackMinWidth = tmp;
}
else if( TESTLINE( "ZoneClearence" ) )
{
BIU tmp = biuParse( data );
g_Zone_Default_Setting.m_ZoneClearance = tmp;
}
else if( TESTLINE( "DrawSegmWidth" ) )
{
BIU tmp = biuParse( data );
m_board->GetBoardDesignSettings()->m_DrawSegmentWidth = tmp;
}
else if( TESTLINE( "EdgeSegmWidth" ) )
{
BIU tmp = biuParse( data );
m_board->GetBoardDesignSettings()->m_EdgeSegmentWidth = tmp;
}
else if( TESTLINE( "ViaMinSize" ) )
{
BIU tmp = biuParse( data );
m_board->GetBoardDesignSettings()->m_ViasMinSize = tmp;
}
else if( TESTLINE( "MicroViaMinSize" ) )
{
BIU tmp = biuParse( data );
m_board->GetBoardDesignSettings()->m_MicroViasMinSize = tmp;
}
else if( TESTLINE( "ViaSizeList" ) )
{
// e.g. "ViaSizeList DIAMETER [DRILL]"
BIU drill = 0;
BIU diameter = biuParse( data );
data = strtok( NULL, delims );
if( data ) // DRILL may not be present
drill = biuParse( data );
m_board->m_ViasDimensionsList.push_back( VIA_DIMENSION( diameter, drill ) );
}
else if( TESTLINE( "ViaDrill" ) )
{
BIU tmp = biuParse( data );
netclass_default->SetViaDrill( tmp );
}
else if( TESTLINE( "ViaMinDrill" ) )
{
BIU tmp = biuParse( data );
m_board->GetBoardDesignSettings()->m_ViasMinDrill = tmp;
}
else if( TESTLINE( "MicroViaDrill" ) )
{
BIU tmp = biuParse( data );
netclass_default->SetuViaDrill( tmp );
}
else if( TESTLINE( "MicroViaMinDrill" ) )
{
BIU tmp = biuParse( data );
m_board->GetBoardDesignSettings()->m_MicroViasMinDrill = tmp;
}
else if( TESTLINE( "MicroViasAllowed" ) )
{
m_board->GetBoardDesignSettings()->m_MicroViasAllowed = atoi( data );
}
else if( TESTLINE( "TextPcbWidth" ) )
{
BIU tmp = biuParse( data );
m_board->GetBoardDesignSettings()->m_PcbTextWidth = tmp;
}
else if( TESTLINE( "TextPcbSize" ) )
{
BIU x = biuParse( data, &data );
BIU y = biuParse( data );
m_board->GetBoardDesignSettings()->m_PcbTextSize = wxSize( x, y );
}
else if( TESTLINE( "EdgeModWidth" ) )
{
BIU tmp = biuParse( data );
/* @todo
g_ModuleSegmentWidth = tmp;
*/
}
else if( TESTLINE( "TextModWidth" ) )
{
BIU tmp = biuParse( data );
/* @todo
g_ModuleTextWidth = tmp;
*/
}
else if( TESTLINE( "TextModSize" ) )
{
BIU x = biuParse( data, &data );
BIU y = biuParse( data );
/* @todo
g_ModuleTextSize = wxSize( x, y );
*/
}
else if( TESTLINE( "PadSize" ) )
{
BIU x = biuParse( data, &data );
BIU y = biuParse( data );
/* @todo
g_Pad_Master.m_Size = wxSize( x, y );
*/
}
else if( TESTLINE( "PadDrill" ) )
{
BIU tmp = biuParse( data );
/* @todo
g_Pad_Master.m_Drill.x( tmp );
g_Pad_Master.m_Drill.y( tmp );
*/
}
else if( TESTLINE( "Pad2MaskClearance" ) )
{
BIU tmp = biuParse( data );
m_board->GetBoardDesignSettings()->m_SolderMaskMargin = tmp;
}
else if( TESTLINE( "Pad2PasteClearance" ) )
{
BIU tmp = biuParse( data );
m_board->GetBoardDesignSettings()->m_SolderPasteMargin = tmp;
}
else if( TESTLINE( "Pad2PasteClearanceRatio" ) )
{
double ratio = atof( data );
m_board->GetBoardDesignSettings()->m_SolderPasteMarginRatio = ratio;
}
else if( TESTLINE( "GridOrigin" ) )
{
BIU gx = biuParse( data, &data );
BIU gy = biuParse( data );
/* @todo
GetScreen()->m_GridOrigin.x = Ox;
GetScreen()->m_GridOrigin.y = Oy;
*/
}
#endif
}
// @todo: this code is currently unreachable, would need a goto, to get here.
// that may be better handled with an #ifdef
/* Ensure tracks and vias sizes lists are ok:
* Sort lists by by increasing value and remove duplicates
* (the first value is not tested, because it is the netclass value
*/
sort( m_board->m_ViasDimensionsList.begin() + 1, m_board->m_ViasDimensionsList.end() );
sort( m_board->m_TrackWidthList.begin() + 1, m_board->m_TrackWidthList.end() );
for( unsigned ii = 1; ii < m_board->m_ViasDimensionsList.size() - 1; ii++ )
{
if( m_board->m_ViasDimensionsList[ii] == m_board->m_ViasDimensionsList[ii + 1] )
{
m_board->m_ViasDimensionsList.erase( m_board->m_ViasDimensionsList.begin() + ii );
ii--;
}
}
for( unsigned ii = 1; ii < m_board->m_TrackWidthList.size() - 1; ii++ )
{
if( m_board->m_TrackWidthList[ii] == m_board->m_TrackWidthList[ii + 1] )
{
m_board->m_TrackWidthList.erase( m_board->m_TrackWidthList.begin() + ii );
ii--;
}
}
}
void KICAD_PLUGIN::loadMODULE()
{
MODULE* module = new MODULE( m_board );
// immediately save object in tree, so if exception, no memory leak
m_board->Add( module, ADD_APPEND );
char* line = aReader->Line();
char* text = line + 3;
S3D_MASTER* t3D = me->m_3D_Drawings;
S3D_MASTER* t3D = module->m_3D_Drawings;
if( !t3D->m_Shape3DName.IsEmpty() )
{
S3D_MASTER* n3D = new S3D_MASTER( me );
S3D_MASTER* n3D = new S3D_MASTER( module );
me->m_3D_Drawings.PushBack( n3D );
module->m_3D_Drawings.PushBack( n3D );
t3D = n3D;
}
......@@ -324,9 +884,9 @@ void KICAD_PLUGIN::load( MODULE* me )
case '$':
if( line[1] == 'E' )
{
return 0;
return;
}
return 1;
goto out; // error
case 'N': // Shape File Name
{
......@@ -334,8 +894,8 @@ void KICAD_PLUGIN::load( MODULE* me )
ReadDelimitedText( buf, text, 512 );
t3D->m_Shape3DName = FROM_UTF8( buf );
break;
}
break;
case 'S': // Scale
sscanf( text, "%lf %lf %lf\n",
......@@ -362,20 +922,282 @@ void KICAD_PLUGIN::load( MODULE* me )
break;
}
}
out:
m_error = wxT( "Missing '$EndMODULE'" );
THROW_IO_ERROR( m_error );
}
void KICAD_PLUGIN::loadDRAWSEGMENT()
{
/* example:
$DRAWSEGMENT
Po 0 57500 -1000 57500 0 150
De 24 0 900 0 0
$EndDRAWSEGMENT
*/
// immediately save object in tree, so if exception, no memory leak
DRAWSEGMENT* dseg = new DRAWSEGMENT( m_board );
m_board->Add( dseg, ADD_APPEND );
while( aReader->ReadLine() )
{
char* line = aReader->Line();
if( strnicmp( line, "$End", 4 ) == 0 )
return; // Normal end matches here, because it's: $EndDRAWSEGMENT
if( line[0] == 'P' )
{
// sscanf( line + 2, " %d %d %d %d %d %d", &m_Shape, &m_Start.x, &m_Start.y, &m_End.x, &m_End.y, &m_Width );
const char* next = line + 2;
BIU shape = biuParse( next, &next );
BIU start_x = biuParse( next, &next );
BIU start_y = biuParse( next, &next );
BIU end_x = biuParse( next, &next );
BIU end_y = biuParse( next, &next );
BIU width = biuParse( next );
if( width < 0 )
width = 0;
dseg->SetShape( shape );
dseg->SetWidth( width );
dseg->SetStart( wxPoint( start_x, start_y ) );
dseg->SetEnd( wxPoint( end_x, end_y ) );
}
else if( line[0] == 'D' )
{
BIU x = 0;
BIU y = 0;
int val;
char* token = strtok( line, " " ); // "De", skip it
for( int i = 0; (token = strtok( NULL," " )) != NULL; ++i )
{
switch( i )
{
case 0:
sscanf( token, "%d", &val );
if( val < FIRST_NO_COPPER_LAYER )
val = FIRST_NO_COPPER_LAYER;
else if( val > LAST_NO_COPPER_LAYER )
val = LAST_NO_COPPER_LAYER;
dseg->SetLayer( val );
break;
case 1:
sscanf( token, "%d", &val );
dseg->SetType( val ); // m_Type
break;
case 2:
sscanf( token, "%d", &val );
dseg->SetAngle( val ); // m_Angle
break;
case 3:
sscanf( token, "%lX", &dseg->m_TimeStamp );
break;
case 4:
sscanf( token, "%X", &val );
dseg->SetState( val, ON );
break;
// Bezier Control Points
case 5:
x = biuParse( token );
break;
case 6:
y = biuParse( token );
dseg->SetBezControl1( wxPoint( x, y ) );
break;
case 7:
x = biuParse( token );
break;
case 8:
y = biuParse( token );
dseg->SetBezControl2( wxPoint( x, y ) );
break;
default:
break;
}
}
}
}
m_error = wxT( "Missing '$EndDRAWSEGMENT'" );
THROW_IO_ERROR( m_error );
}
void KICAD_PLUGIN::loadNETINFO_ITEM()
{
char buf[1024];
NETINFO_ITEM* net = new NETINFO_ITEM( m_board );
m_board->m_NetInfo->AppendNet( net );
while( aReader->ReadLine() )
{
char* line = aReader->Line();
if( strnicmp( line, "$End", 4 ) == 0 )
return; // preferred exit
if( strncmp( line, "Na", 2 ) == 0 )
{
int tmp = atoi( line + 2 );
net->SetNet( tmp );
// skips to the first quote char
ReadDelimitedText( buf, line + 2, sizeof(buf) );
net->SetNetname( FROM_UTF8( buf ) );
}
}
m_error = wxT( "Missing '$EndEQUIPOT'" );
THROW_IO_ERROR( m_error );
}
void KICAD_PLUGIN::loadPCB_TEXTE()
{
/*
For a single line text:
$TEXTPCB
Te "Text example"
Po 66750 53450 600 800 150 0
From 24 1 0 Italic
$EndTEXTPCB
For a multi line text:
$TEXTPCB
Te "Text example"
Nl "Line 2"
Po 66750 53450 600 800 150 0
From 24 1 0 Italic
$EndTEXTPCB
Nl "line nn" is a line added to the current text
*/
char text[1024];
char style[256];
TEXTE_PCB* pcbtxt = new TEXTE_PCB( m_board );
m_board->Add( pcbtxt, ADD_APPEND );
while( aReader->ReadLine() )
{
char* line = aReader->Line();
if( TESTLINE( "$EndTEXTPCB" ) )
return; // preferred exit
#if 0 // @todo
else if( TESTLINE( "Te" ) ) // Text line (first line for multi line texts)
{
ReadDelimitedText( text, line + 2, sizeof(text) );
m_Text = FROM_UTF8( text );
}
else if( TESTLINE( "nl" ) ) // next line of the current text
{
ReadDelimitedText( text, line + 2, sizeof(text) );
m_Text.Append( '\n' );
m_Text += FROM_UTF8( text );
}
else if( TESTLINE( "Po" ) )
{
sscanf( line + 2, " %d %d %d %d %d %d",
&m_Pos.x, &m_Pos.y,
&m_Size.x, &m_Size.y,
&m_Thickness, &m_Orient );
// Ensure the text has minimal size to see this text on screen:
if( m_Size.x < 5 )
m_Size.x = 5;
if( m_Size.y < 5 )
m_Size.y = 5;
}
else if( TESTLINE( "De" ) )
{
style[0] = 0;
int normal_display = 1;
char hJustify = 'c';
sscanf( line + 2, " %d %d %lX %s %c\n", &m_Layer, &normal_display,
&m_TimeStamp, style, &hJustify );
m_Mirror = normal_display ? false : true;
if( m_Layer < FIRST_COPPER_LAYER )
m_Layer = FIRST_COPPER_LAYER;
else if( m_Layer > LAST_NO_COPPER_LAYER )
m_Layer = LAST_NO_COPPER_LAYER;
if( strnicmp( style, "Italic", 6 ) == 0 )
m_Italic = 1;
else
m_Italic = 0;
switch( hJustify )
{
case 'l':
case 'L':
m_HJustify = GR_TEXT_HJUSTIFY_LEFT;
break;
case 'c':
case 'C':
m_HJustify = GR_TEXT_HJUSTIFY_CENTER;
break;
case 'r':
case 'R':
m_HJustify = GR_TEXT_HJUSTIFY_RIGHT;
break;
default:
m_HJustify = GR_TEXT_HJUSTIFY_CENTER;
break;
}
}
#endif
}
/* @todo: this is unreachable code, except for when the terminator is missing
// Set a reasonable width:
if( m_Thickness < 1 )
m_Thickness = 1;
m_Thickness = Clamp_Text_PenSize( m_Thickness, m_Size );
*/
m_error = wxT( "Missing '$EndTEXTPCB'" );
THROW_IO_ERROR( m_error );
}
std::string KICAD_PLUGIN::biuFmt( BIU aValue )
{
BFU engUnits = biuToDiskUnits * aValue;
double engUnits = biuToDisk * aValue;
char temp[48];
if( engUnits != 0.0 && fabsl( engUnits ) <= 0.0001 )
if( engUnits != 0.0 && fabs( engUnits ) <= 0.0001 )
{
// printf( "f: " );
sprintf( temp, "%.10f", engUnits );
int len = strlen( temp );
int len = sprintf( temp, "%.10f", engUnits );
while( --len > 0 && temp[len] == '0' )
temp[len] = '\0';
......@@ -390,19 +1212,57 @@ std::string KICAD_PLUGIN::biuFmt( BIU aValue )
}
void KICAD_PLUGIN::init( BOARD* aBoard, PROPERTIES* aProperties )
BIU KICAD_PLUGIN::biuParse( const char* aValue, const char** nptrptr )
{
NbDraw = NbTrack = NbZone = NbMod = NbNets = -1;
char* nptr;
errno = 0;
double fval = strtod( aValue, &nptr );
if( errno || aValue == nptr )
{
m_error.Printf( _( "invalid float number in file: '%s' line: %d" ),
aReader->GetSource().GetData(), aReader->LineNumber() );
aBoard->m_Status_Pcb = 0;
aBoard->m_NetClasses.Clear();
THROW_IO_ERROR( m_error );
}
if( nptrptr )
*nptrptr = nptr;
// There should be no rounding issues here, since the values in the file initially
// came from integers via biuFmt(). In fact this product should be an integer, exactly.
return BIU( fval * diskToBiu );
}
void KICAD_PLUGIN::Save( const wxString* aFileName, BOARD* aBoard, PROPERTIES* aProperties )
void KICAD_PLUGIN::init( PROPERTIES* aProperties )
{
NbDraw = NbTrack = NbZone = NbMod = NbNets = -1;
#if defined(KICAD_NANOMETRE)
biuToDisk = 1/1000000.0; // BIUs are nanometers
#else
biuToDisk = 1.0; // BIUs are deci-mils
#endif
// start by assuming the board is in deci-mils.
// if we see "Units mm" in the $GENERAL section, switch to 1000000.0 then.
#if defined(KICAD_NANOMETRE)
diskToBiu = 2540.0; // BIUs are nanometers
#else
diskToBiu = 1.0; // BIUs are deci-mils
#endif
m_board->m_Status_Pcb = 0;
m_board->m_NetClasses.Clear();
}
void KICAD_PLUGIN::Save( const wxString* aFileName, BOARD* aBoard, PROPERTIES* aProperties )
{
LOCALE_IO toggle; // toggles on then off the C locale.
}
pcbnew/kicad_plugin.h
View file @ 701fa6b0
......@@ -28,7 +28,6 @@
#include <string>
typedef int BIU;
typedef double BFU;
class PCB_TARGET;
class MODULE;
......@@ -63,12 +62,13 @@ public:
protected:
wxString m_Error; ///< for throwing exceptions
wxString m_error; ///< for throwing exceptions
BOARD* m_board; ///< which BOARD, no ownership here
LINE_READER* m_Reader; ///< no ownership here.
LINE_READER* aReader; ///< no ownership here.
/// initialize PLUGIN like a constructor would, and futz with fresh BOARD if needed.
void init( BOARD* board, PROPERTIES* aProperties );
void init( PROPERTIES* aProperties );
int NbDraw;
int NbTrack;
......@@ -76,28 +76,47 @@ protected:
int NbMod;
int NbNets;
BFU biuToDisk; ///< convert from BIUs to disk engineering units with this scale factor
BFU diskToBiu; ///< convert from disk engineering units to BIUs with this scale factor
double biuToDisk; ///< convert from BIUs to disk engineering units with this scale factor
double diskToBiu; ///< convert from disk engineering units to BIUs with this scale factor
/// convert a BIU to engineering units by scaling and formatting to ASCII.
std::string biuFmt( BIU aValue );
/**
* Function biuParse
* parses an ASCII decimal floating point value and scales it into a BIU
* according to the current value of diskToBui.
*
* @param aValue is the ASCII value in C locale form.
*
* @param nptrptr may be NULL, but if not, then it tells where to put a
* pointer to the next unconsumed input text. See man strtod() for more information.
*
* @return BIU - the converted Board Internal Unit.
*/
BIU biuParse( const char* aValue, const char** nptrptr = NULL );
// load / parse functions
void loadGeneral( BOARD* me );
void loadSetup( BOARD* me );
void loadSheet( BOARD* me );
void loadAllSections( bool doAppend );
void loadGENERAL();
void loadSETUP();
void loadSHEET();
void loadMODULE();
void loadDRAWSEGMENT();
void loadNETINFO_ITEM();
void loadPCB_TEXTE();
/*
void load( PCB_TARGET* me );
void load( MODULE* me );
void load( DRAWSEGMENT* me );
void load( NETINFO* me );
void load( TEXTE_PCB* me );
void load( TRACK* me );
void load( NETCLASS* me );
void load( ZONE_CONTAINER* me );
void load( DIMENSION* me );
void load( NETINFO_ITEM* me );
*/
// void load( SEGZONE* me );
};
......
pcbnew/xchgmod.cpp
View file @ 701fa6b0
......@@ -149,8 +149,9 @@ int DIALOG_EXCHANGE_MODULE::Maj_ListeCmp( const wxString& reference,
wxFileName fn;
wxFileName tmpFileName;
FILE* FichCmp, * NewFile;
char Line[1024];
char line[1024];
wxString msg;
char* rs;
if( old_name == new_name )
return 0;
......@@ -188,17 +189,18 @@ int DIALOG_EXCHANGE_MODULE::Maj_ListeCmp( const wxString& reference,
return 1;
}
fgets( Line, sizeof(Line), FichCmp );
rs = fgets( line, sizeof(line), FichCmp );
fprintf( NewFile, "Cmp-Mod V01 Genere par PcbNew le %s\n", TO_UTF8( DateAndTime() ) );
bool start_descr = false;
while( fgets( Line, sizeof(Line), FichCmp ) != NULL )
while( fgets( line, sizeof(line), FichCmp ) != NULL )
{
if( strnicmp( Line, "Reference = ", 9 ) == 0 )
if( strnicmp( line, "Reference = ", 9 ) == 0 )
{
char buf[1024];
strcpy( buf, Line + 12 );
strcpy( buf, line + 12 );
strtok( buf, ";\n\r" );
if( stricmp( buf, TO_UTF8( reference ) ) == 0 )
......@@ -207,14 +209,14 @@ int DIALOG_EXCHANGE_MODULE::Maj_ListeCmp( const wxString& reference,
}
}
if( (strnicmp( Line, "Begin", 5 ) == 0) || (strnicmp( Line, "End", 3 ) == 0) )
if( (strnicmp( line, "Begin", 5 ) == 0) || (strnicmp( line, "End", 3 ) == 0) )
{
start_descr = false;
}
if( start_descr && strnicmp( Line, "IdModule", 8 ) == 0 )
if( start_descr && strnicmp( line, "IdModule", 8 ) == 0 )
{
sprintf( Line + 8, " = %s;\n", TO_UTF8( new_name ) );
sprintf( line + 8, " = %s;\n", TO_UTF8( new_name ) );
msg = wxT( " * in <" ) + fn.GetFullPath() + wxT( ">.\n" );
m_WinMessages->AppendText( msg );
......@@ -222,7 +224,7 @@ int DIALOG_EXCHANGE_MODULE::Maj_ListeCmp( const wxString& reference,
start_descr = false;
}
fputs( Line, NewFile );
fputs( line, NewFile );
}
fclose( FichCmp );
......@@ -422,7 +424,7 @@ bool DIALOG_EXCHANGE_MODULE::Change_1_Module( MODULE* Module,
{
wxString namecmp, oldnamecmp;
MODULE* NewModule;
wxString Line;
wxString line;
if( Module == NULL )
return false;
......@@ -434,10 +436,10 @@ bool DIALOG_EXCHANGE_MODULE::Change_1_Module( MODULE* Module,
namecmp = new_module;
/* Load module. */
Line.Printf( _( "Change module %s (%s) " ),
line.Printf( _( "Change module %s (%s) " ),
GetChars( Module->m_Reference->m_Text ),
GetChars( oldnamecmp ) );
m_WinMessages->AppendText( Line );
m_WinMessages->AppendText( line );
namecmp.Trim( true );
namecmp.Trim( false );
......@@ -581,10 +583,11 @@ void PCB_EDIT_FRAME::RecreateCmpFileFromBoard( wxCommandEvent& aEvent )
{
wxFileName fn;
FILE* FichCmp;
char Line[1024];
char line[1024];
MODULE* Module = GetBoard()->m_Modules;
wxString msg;
wxString wildcard;
char* rs;
if( Module == NULL )
{
......@@ -615,7 +618,7 @@ void PCB_EDIT_FRAME::RecreateCmpFileFromBoard( wxCommandEvent& aEvent )
return;
}
fgets( Line, sizeof(Line), FichCmp );
rs = fgets( line, sizeof(line), FichCmp );
fprintf( FichCmp, "Cmp-Mod V01 Genere par PcbNew le %s\n", TO_UTF8( DateAndTime() ) );
for( ; Module != NULL; Module = Module->Next() )
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment