Skip to content

K
kicad-source-mirror
Commit 69ce4a2b authored by charras's avatar charras
Browse files
Options

Pcbnew:solved: bug in autorouter.

parent c5725437
Hide whitespace changes
Inline Side-by-side
Showing with 109 additions and 87 deletions
pcbnew/solve.cpp
View file @ 69ce4a2b
......@@ -65,9 +65,9 @@ static int delta[8][2] = {
};
static int ndir[8] = { /* for building paths back to source */
FROM_SOUTHEAST, FROM_SOUTH, FROM_SOUTHWEST,
FROM_SOUTHEAST, FROM_SOUTH, FROM_SOUTHWEST,
FROM_EAST, FROM_WEST,
FROM_NORTHEAST, FROM_NORTH, FROM_NORTHWEST
FROM_NORTHEAST, FROM_NORTH, FROM_NORTHWEST
};
/* blocking masks for neighboring cells */
......@@ -173,24 +173,25 @@ static struct
long trace;
int present;
} selfok2[8] = {
{ HOLE_NORTHWEST, 0 },
{ HOLE_NORTH, 0 },
{ HOLE_NORTHEAST, 0 },
{ HOLE_WEST, 0 },
{ HOLE_EAST, 0 },
{ HOLE_SOUTHWEST, 0 },
{ HOLE_SOUTH, 0 },
{ HOLE_SOUTHEAST, 0 }
{ HOLE_NORTHWEST, 0 },
{ HOLE_NORTH, 0 },
{ HOLE_NORTHEAST, 0 },
{ HOLE_WEST, 0 },
{ HOLE_EAST, 0 },
{ HOLE_SOUTHWEST, 0 },
{ HOLE_SOUTH, 0 },
{ HOLE_SOUTHEAST, 0 }
};
static long newmask[8] = { /* patterns to mask out in neighbor cells */
0, CORNER_NORTHWEST | CORNER_NORTHEAST, 0,
0, CORNER_NORTHWEST | CORNER_NORTHEAST,
0,
CORNER_NORTHWEST | CORNER_SOUTHWEST, CORNER_NORTHEAST | CORNER_SOUTHEAST,
0, CORNER_SOUTHWEST | CORNER_SOUTHEAST, 0
0, CORNER_SOUTHWEST | CORNER_SOUTHEAST,
0
};
/********************************************************/
/* int WinEDA_PcbFrame::Solve(wxDC * DC, int two_sides) */
/********************************************************/
......@@ -221,11 +222,11 @@ int WinEDA_PcbFrame::Solve( wxDC* DC, int two_sides )
/* go until no more work to do */
GetWork( &row_source, &col_source, &current_net_code,
&row_target, &col_target, &pt_cur_ch ); // 1er chevelu a router
&row_target, &col_target, &pt_cur_ch ); // 1er chevelu a router
for( ; row_source != ILLEGAL; GetWork( &row_source, &col_source,
&current_net_code, &row_target, &col_target,
&pt_cur_ch ) )
&current_net_code, &row_target, &col_target,
&pt_cur_ch ) )
{
/* Tst demande d'arret de routage ( key ESCAPE actionnee ) */
wxYield();
......@@ -263,7 +264,7 @@ int WinEDA_PcbFrame::Solve( wxDC* DC, int two_sides )
pt_cur_ch->pad_end->Draw( DrawPanel, DC, GR_OR | GR_SURBRILL );
success = Route_1_Trace( this, DC, two_sides, row_source, col_source,
row_target, col_target, pt_cur_ch );
row_target, col_target, pt_cur_ch );
switch( success )
{
......@@ -306,9 +307,11 @@ int WinEDA_PcbFrame::Solve( wxDC* DC, int two_sides )
}
/**************************/
/* int Route_1_Trace(xxx) */
/**************************/
/**********************************************************************************/
static int Route_1_Trace( WinEDA_PcbFrame* pcbframe, wxDC* DC,
int two_sides, int row_source, int col_source,
int row_target, int col_target, CHEVELU* pt_chevelu )
/**********************************************************************************/
/* Route une piste du BOARD.
* Parametres:
......@@ -325,9 +328,6 @@ int WinEDA_PcbFrame::Solve( wxDC* DC, int two_sides )
* STOP_FROM_ESC si Escape demande
* ERR_MEMORY defaut alloc RAM
*/
static int Route_1_Trace( WinEDA_PcbFrame* pcbframe, wxDC* DC,
int two_sides, int row_source, int col_source,
int row_target, int col_target, CHEVELU* pt_chevelu )
{
int r, c, side, d, apx_dist, nr, nc;
int result, skip;
......@@ -419,13 +419,14 @@ static int Route_1_Trace( WinEDA_PcbFrame* pcbframe, wxDC* DC,
/* Placement du bit de suppression d'obstacle relative aux 2 pads a relier */
pcbframe->Affiche_Message( wxT( "Gen Cells" ) );
Place_1_Pad_Board( pcbframe->GetBoard(), pt_cur_ch->pad_start, CURRENT_PAD, marge, WRITE_OR_CELL );
Place_1_Pad_Board(
pcbframe->GetBoard(), pt_cur_ch->pad_start, CURRENT_PAD, marge, WRITE_OR_CELL );
Place_1_Pad_Board( pcbframe->GetBoard(), pt_cur_ch->pad_end, CURRENT_PAD, marge, WRITE_OR_CELL );
/* Regenere les barrieres restantes (qui peuvent empieter sur le placement
* des bits precedents) */
ptr = (LISTE_PAD*) &pcbframe->GetBoard()->m_Pads[0];
i = pcbframe->GetBoard()->m_Pads.size();
i = pcbframe->GetBoard()->m_Pads.size();
for( ; i > 0; i--, ptr++ )
{
if( (pt_cur_ch->pad_start != *ptr) && (pt_cur_ch->pad_end != *ptr) )
......@@ -446,7 +447,7 @@ static int Route_1_Trace( WinEDA_PcbFrame* pcbframe, wxDC* DC,
{
start_mask_layer = 2;
if( SetQueue( row_source, col_source, TOP, 0, apx_dist,
row_target, col_target ) == 0 )
row_target, col_target ) == 0 )
{
return ERR_MEMORY;
}
......@@ -456,7 +457,7 @@ static int Route_1_Trace( WinEDA_PcbFrame* pcbframe, wxDC* DC,
start_mask_layer |= 1;
if( SetQueue( row_source, col_source, BOTTOM, 0, apx_dist,
row_target, col_target ) == 0 )
row_target, col_target ) == 0 )
{
return ERR_MEMORY;
}
......@@ -468,7 +469,7 @@ static int Route_1_Trace( WinEDA_PcbFrame* pcbframe, wxDC* DC,
{
start_mask_layer = 1;
if( SetQueue( row_source, col_source, BOTTOM, 0, apx_dist,
row_target, col_target ) == 0 )
row_target, col_target ) == 0 )
{
return ERR_MEMORY;
}
......@@ -478,7 +479,7 @@ static int Route_1_Trace( WinEDA_PcbFrame* pcbframe, wxDC* DC,
start_mask_layer |= 2;
if( SetQueue( row_source, col_source, TOP, 0, apx_dist,
row_target, col_target ) == 0 )
row_target, col_target ) == 0 )
{
return ERR_MEMORY;
}
......@@ -490,7 +491,7 @@ static int Route_1_Trace( WinEDA_PcbFrame* pcbframe, wxDC* DC,
start_mask_layer = 1;
if( SetQueue( row_source, col_source, BOTTOM, 0, apx_dist,
row_target, col_target ) == 0 )
row_target, col_target ) == 0 )
{
return ERR_MEMORY;
}
......@@ -509,17 +510,17 @@ static int Route_1_Trace( WinEDA_PcbFrame* pcbframe, wxDC* DC,
/* Efface Liaison */
GRSetDrawMode( DC, GR_XOR );
GRLine( &pcbframe->DrawPanel->m_ClipBox,
DC,
segm_oX,
segm_oY,
segm_fX,
segm_fY,
0,
WHITE );
DC,
segm_oX,
segm_oY,
segm_fX,
segm_fY,
0,
WHITE );
/* Generation de la trace */
if( Retrace( pcbframe, DC, row_source, col_source,
row_target, col_target, side, current_net_code ) )
row_target, col_target, side, current_net_code ) )
{
result = SUCCESS; /* Success : Route OK */
}
......@@ -591,9 +592,9 @@ static int Route_1_Trace( WinEDA_PcbFrame* pcbframe, wxDC* DC,
olddir = GetDir( r, c, side );
newdist = d + CalcDist( ndir[i], olddir,
(olddir == FROM_OTHERSIDE) ? GetDir( r,
c,
1 - side ) : 0, side );
(olddir == FROM_OTHERSIDE) ? GetDir( r,
c,
1 - side ) : 0, side );
/* if (a) not visited yet, or (b) we have */
/* found a better path, add it to queue */
......@@ -602,8 +603,8 @@ static int Route_1_Trace( WinEDA_PcbFrame* pcbframe, wxDC* DC,
SetDir( nr, nc, side, ndir[i] );
SetDist( nr, nc, side, newdist );
if( SetQueue( nr, nc, side, newdist,
GetApxDist( nr, nc, row_target, col_target ),
row_target, col_target ) == 0 )
GetApxDist( nr, nc, row_target, col_target ),
row_target, col_target ) == 0 )
{
return ERR_MEMORY;
}
......@@ -613,8 +614,8 @@ static int Route_1_Trace( WinEDA_PcbFrame* pcbframe, wxDC* DC,
SetDir( nr, nc, side, ndir[i] );
SetDist( nr, nc, side, newdist );
ReSetQueue( nr, nc, side, newdist,
GetApxDist( nr, nc, row_target, col_target ),
row_target, col_target );
GetApxDist( nr, nc, row_target, col_target ),
row_target, col_target );
}
}
......@@ -663,7 +664,7 @@ static int Route_1_Trace( WinEDA_PcbFrame* pcbframe, wxDC* DC,
SetDir( r, c, 1 - side, FROM_OTHERSIDE );
SetDist( r, c, 1 - side, newdist );
if( SetQueue( r, c, 1 - side, newdist, apx_dist, row_target,
col_target ) == 0 )
col_target ) == 0 )
{
return ERR_MEMORY;
}
......@@ -678,8 +679,10 @@ static int Route_1_Trace( WinEDA_PcbFrame* pcbframe, wxDC* DC,
}
end_of_route:
Place_1_Pad_Board( pcbframe->GetBoard(), pt_cur_ch->pad_start, ~CURRENT_PAD, marge, WRITE_AND_CELL );
Place_1_Pad_Board( pcbframe->GetBoard(), pt_cur_ch->pad_end, ~CURRENT_PAD, marge, WRITE_AND_CELL );
Place_1_Pad_Board(
pcbframe->GetBoard(), pt_cur_ch->pad_start, ~CURRENT_PAD, marge, WRITE_AND_CELL );
Place_1_Pad_Board(
pcbframe->GetBoard(), pt_cur_ch->pad_end, ~CURRENT_PAD, marge, WRITE_AND_CELL );
return result;
}
......@@ -688,30 +691,40 @@ end_of_route:
static long bit[8][9] = { /* OT=Otherside */
/* N, NE, E, SE, S, SW, W, NW, OT */
/* N */
{ LINE_VERTICAL, BENT_StoNE, CORNER_SOUTHEAST, SHARP_StoSE, 0,
{ LINE_VERTICAL, BENT_StoNE, CORNER_SOUTHEAST,
SHARP_StoSE,
0,
SHARP_StoSW, CORNER_SOUTHWEST, BENT_StoNW, (HOLE | HOLE_SOUTH) },
/* NE */ { BENT_NtoSW, DIAG_NEtoSW, BENT_EtoSW, ANGLE_SEtoSW, SHARP_StoSW,
/* NE */ { BENT_NtoSW, DIAG_NEtoSW, BENT_EtoSW, ANGLE_SEtoSW,
SHARP_StoSW,
0, SHARP_WtoSW, ANGLE_SWtoNW, (HOLE | HOLE_SOUTHWEST) },
/* E */ { CORNER_NORTHWEST, BENT_WtoNE, LINE_HORIZONTAL, BENT_WtoSE,
/* E */ { CORNER_NORTHWEST, BENT_WtoNE, LINE_HORIZONTAL, BENT_WtoSE,
CORNER_SOUTHWEST, SHARP_WtoSW, 0, SHARP_WtoNW, (HOLE | HOLE_WEST) },
/* SE */ { SHARP_NtoNW, ANGLE_NWtoNE, BENT_EtoNW, DIAG_SEtoNW, BENT_StoNW,
/* SE */ { SHARP_NtoNW, ANGLE_NWtoNE, BENT_EtoNW, DIAG_SEtoNW,
BENT_StoNW,
ANGLE_SWtoNW, SHARP_WtoNW, 0, (HOLE | HOLE_NORTHWEST) },
/* S */ { 0, SHARP_NtoNE, CORNER_NORTHEAST, BENT_NtoSE, LINE_VERTICAL,
/* S */ { 0, SHARP_NtoNE, CORNER_NORTHEAST, BENT_NtoSE,
LINE_VERTICAL,
BENT_NtoSW, CORNER_NORTHWEST, SHARP_NtoNW, (HOLE | HOLE_NORTH) },
/* SW */ { SHARP_NtoNE, 0, SHARP_EtoNE, ANGLE_NEtoSE, BENT_StoNE,
/* SW */ { SHARP_NtoNE, 0, SHARP_EtoNE, ANGLE_NEtoSE,
BENT_StoNE,
DIAG_NEtoSW,
BENT_WtoNE, ANGLE_NWtoNE, (HOLE | HOLE_NORTHEAST) },
/* W */ { CORNER_NORTHEAST, SHARP_EtoNE, 0, SHARP_EtoSE, CORNER_SOUTHEAST,
/* W */ { CORNER_NORTHEAST, SHARP_EtoNE, 0, SHARP_EtoSE,
CORNER_SOUTHEAST,
BENT_EtoSW, LINE_HORIZONTAL, BENT_EtoNW, (HOLE | HOLE_EAST) },
/* NW */ { BENT_NtoSE, ANGLE_NEtoSE, SHARP_EtoSE, 0, SHARP_StoSE,
/* NW */ { BENT_NtoSE, ANGLE_NEtoSE, SHARP_EtoSE, 0,
SHARP_StoSE,
ANGLE_SEtoSW, BENT_WtoSE, DIAG_SEtoNW, (HOLE | HOLE_SOUTHEAST) }
};
/*****************************************************************/
/* int Retrace (COMMAND * Cmd, int row_source, int col_source */
/* int row_target, int col_target, int target_side, */
/* int current_net_code ) */
/*****************************************************************/
/*******************************************************************/
static int Retrace( WinEDA_PcbFrame* pcbframe, wxDC* DC,
int row_source, int col_source,
int row_target, int col_target, int target_side,
int current_net_code )
/*******************************************************************/
/* work from target back to source, actually laying the traces
* Parametres:
......@@ -729,10 +742,6 @@ static long bit[8][9] = { /* OT=Otherside */
* > 0 si Ok
*/
static int Retrace( WinEDA_PcbFrame* pcbframe, wxDC* DC,
int row_source, int col_source,
int row_target, int col_target, int target_side,
int current_net_code )
{
int r0, c0, s0;
int r1, c1, s1; /* row, col, side d'ou on vient */
......@@ -919,11 +928,11 @@ static void OrCell_Trace( BOARD* pcb, int col, int row,
g_CurrentTrackSegment->SetState( SEGM_AR, ON );
g_CurrentTrackSegment->SetLayer( 0x0F );
g_CurrentTrackSegment->m_Start.x =
g_CurrentTrackSegment->m_End.x = pcb->m_BoundaryBox.m_Pos.x + (g_GridRoutingSize * row);
g_CurrentTrackSegment->m_Start.x =
g_CurrentTrackSegment->m_End.x = pcb->m_BoundaryBox.m_Pos.x + (g_GridRoutingSize * row);
g_CurrentTrackSegment->m_Start.y =
g_CurrentTrackSegment->m_End.y = pcb->m_BoundaryBox.m_Pos.y + (g_GridRoutingSize * col);
g_CurrentTrackSegment->m_Start.y =
g_CurrentTrackSegment->m_End.y = pcb->m_BoundaryBox.m_Pos.y + (g_GridRoutingSize * col);
g_CurrentTrackSegment->m_Width = g_DesignSettings.m_CurrentViaSize;
g_CurrentTrackSegment->m_Shape = g_DesignSettings.m_CurrentViaType;
......@@ -995,8 +1004,7 @@ static void OrCell_Trace( BOARD* pcb, int col, int row,
if( abs( dx0 * dy1 ) == abs( dx1 * dy0 ) ) /* le dernier segment est en ligne*/
{
oldTrack->m_End.x = g_CurrentTrackSegment->m_End.x;
oldTrack->m_End.y = g_CurrentTrackSegment->m_End.y;
oldTrack->m_End = g_CurrentTrackSegment->m_End;
delete g_CurrentTrackList.PopBack();
}
......@@ -1006,18 +1014,20 @@ static void OrCell_Trace( BOARD* pcb, int col, int row,
}
/*******************************************/
/* static void Place_Piste_en_Buffer() */
/*******************************************/
/***********************************************************************/
static void Place_Piste_en_Buffer( WinEDA_PcbFrame* pcbframe, wxDC* DC )
/***********************************************************************/
/* Insere la nouvelle piste creee dans la liste standard des pistes.
* Modifie les points de debut et fin de piste pour qu'ils soient relies
* au centre des pads corresponadants, meme hors grille
*/
static void Place_Piste_en_Buffer( WinEDA_PcbFrame* pcbframe, wxDC* DC )
{
int dx0, dy0, dx1, dy1;
int marge, via_marge;
if( g_FirstTrackSegment == NULL )
return;
int dx0, dy0, dx1, dy1;
int marge, via_marge;
WinEDA_DrawPanel* panel = pcbframe->DrawPanel;
marge = g_DesignSettings.m_TrackClearence + (g_DesignSettings.m_CurrentTrackWidth / 2);
......@@ -1047,27 +1057,39 @@ static void Place_Piste_en_Buffer( WinEDA_PcbFrame* pcbframe, wxDC* DC )
g_CurrentTrackList.PushBack( newTrack );
}
g_FirstTrackSegment->start = Locate_Pad_Connecte( pcbframe->GetBoard(), g_FirstTrackSegment, START );
g_FirstTrackSegment->start = Locate_Pad_Connecte(
pcbframe->GetBoard(), g_FirstTrackSegment, START );
if( g_FirstTrackSegment->start )
g_FirstTrackSegment->SetState( BEGIN_ONPAD, ON );
g_CurrentTrackSegment->end = Locate_Pad_Connecte( pcbframe->GetBoard(), g_CurrentTrackSegment, END );
g_CurrentTrackSegment->end = Locate_Pad_Connecte(
pcbframe->GetBoard(), g_CurrentTrackSegment, END );
if( g_CurrentTrackSegment->end )
g_CurrentTrackSegment->SetState( END_ONPAD, ON );
/* recherche de la zone de rangement et insertion de la nouvelle piste */
pcbframe->GetBoard()->Add( g_FirstTrackSegment );
Trace_Une_Piste( panel, DC, g_FirstTrackSegment, g_CurrentTrackList.GetCount(), GR_OR );
pcbframe->test_1_net_connexion( DC, g_FirstTrackSegment->GetNet() );
/* Trace de la forme exacte de la piste en BOARD */
/* Out the new track on the matrix board */
for( TRACK* track = g_FirstTrackSegment; track; track = track->Next() )
{
TraceSegmentPcb( pcbframe->GetBoard(), track, HOLE, marge, WRITE_CELL );
TraceSegmentPcb( pcbframe->GetBoard(), track, VIA_IMPOSSIBLE, via_marge, WRITE_OR_CELL );
}
// Insert new segments in real board
int netcode = g_FirstTrackSegment->GetNet();
TRACK* firstTrack = g_FirstTrackSegment;
int newCount = g_CurrentTrackList.GetCount();
// Put entire new current segment list in BOARD
TRACK* track;
TRACK* insertBeforeMe = g_CurrentTrackSegment->GetBestInsertPoint( pcbframe->GetBoard() );
while( ( track = g_CurrentTrackList.PopFront() ) != NULL )
{
pcbframe->GetBoard()->m_Track.Insert( track, insertBeforeMe );
}
Trace_Une_Piste( panel, DC, firstTrack, newCount, GR_OR );
pcbframe->test_1_net_connexion( DC, netcode );
ActiveScreen->SetModify();
}
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment