Commit 664692b2 authored by Maciej Suminski's avatar Maciej Suminski

Added outline display mode for pads, vias & tracks

parent 850c0a84
......@@ -43,6 +43,7 @@ RENDER_SETTINGS::RENDER_SETTINGS()
m_hiContrastEnabled = false;
m_hiContrastFactor = 0.2;
m_activeLayer = 0;
m_outlineWidth = 60000;
// Store the predefined colors used in KiCad in format used by GAL
for( int i = 0; i < NBCOLOR; i++ )
......
......@@ -132,6 +132,7 @@ protected:
float m_selectFactor; /// Specifies how color of selected items is changed
float m_layerOpacity; /// Determines opacity of all layers, so every can be seen
/// at the same time
float m_outlineWidth; /// Line width used when drawing outlines
/// Map of colors that were usually used for display
std::map<EDA_COLOR_T, COLOR4D> m_legacyColorMap;
......
......@@ -211,14 +211,17 @@ void PCB_BASE_FRAME::SetBoard( BOARD* aBoard )
view->Add( zone );
}
// Apply layer coloring scheme
// Apply layer coloring scheme & display options
if( view->GetPainter() )
{
KiGfx::PCB_RENDER_SETTINGS* colorSettings = new KiGfx::PCB_RENDER_SETTINGS();
KiGfx::PCB_RENDER_SETTINGS* settings = new KiGfx::PCB_RENDER_SETTINGS();
// Load layers' colors from PCB data
colorSettings->ImportLegacyColors( m_Pcb->GetColorsSettings() );
view->GetPainter()->ApplySettings( colorSettings );
settings->ImportLegacyColors( m_Pcb->GetColorsSettings() );
view->GetPainter()->ApplySettings( settings );
// Load display options (such as filled/outline display of items)
settings->LoadDisplayOptions( DisplayOpt );
}
// Set rendering order of layers (check m_galLayerOrder to see the order)
......@@ -489,6 +492,19 @@ void PCB_BASE_FRAME::OnTogglePolarCoords( wxCommandEvent& aEvent )
void PCB_BASE_FRAME::OnTogglePadDrawMode( wxCommandEvent& aEvent )
{
m_DisplayPadFill = DisplayOpt.DisplayPadFill = !m_DisplayPadFill;
#ifdef KICAD_GAL
// Apply new display options to the GAL canvas
KiGfx::PCB_PAINTER* painter =
static_cast<KiGfx::PCB_PAINTER*> ( m_galCanvas->GetView()->GetPainter() );
KiGfx::PCB_RENDER_SETTINGS* settings =
static_cast<KiGfx::PCB_RENDER_SETTINGS*> ( painter->GetSettings() );
settings->LoadDisplayOptions( DisplayOpt );
if( IsGalCanvasActive() )
m_galCanvas->Refresh();
else
#endif
m_canvas->Refresh();
}
......
......@@ -45,6 +45,12 @@ using namespace KiGfx;
PCB_RENDER_SETTINGS::PCB_RENDER_SETTINGS()
{
// By default everything should be displayed as filled
for( unsigned int i = 0; i < END_PCB_VISIBLE_LIST; ++i )
{
m_sketchModeSelect[i] = false;
}
Update();
}
......@@ -61,10 +67,10 @@ void PCB_RENDER_SETTINGS::ImportLegacyColors( COLORS_DESIGN_SETTINGS* aSettings
m_itemColors[i] = m_legacyColorMap[aSettings->GetItemColor( i )];
}
m_itemColors[VIA_HOLES_VISIBLE] = COLOR4D( 0.5f, 0.4f, 0.0f, 1.0f );
m_itemColors[PAD_HOLES_VISIBLE] = COLOR4D( 0.0f, 0.5f, 0.5f, 1.0f );
m_itemColors[VIAS_VISIBLE] = COLOR4D( 0.7f, 0.7f, 0.7f, 1.0f );
m_itemColors[PADS_VISIBLE] = COLOR4D( 0.7f, 0.7f, 0.7f, 1.0f );
m_itemColors[VIA_HOLES_VISIBLE] = COLOR4D( 0.5, 0.4, 0.0, 1.0 );
m_itemColors[PAD_HOLES_VISIBLE] = COLOR4D( 0.0, 0.5, 0.5, 1.0 );
m_itemColors[VIAS_VISIBLE] = COLOR4D( 0.7, 0.7, 0.7, 1.0 );
m_itemColors[PADS_VISIBLE] = COLOR4D( 0.7, 0.7, 0.7, 1.0 );
Update();
}
......@@ -73,6 +79,11 @@ void PCB_RENDER_SETTINGS::ImportLegacyColors( COLORS_DESIGN_SETTINGS* aSettings
void PCB_RENDER_SETTINGS::LoadDisplayOptions( const DISPLAY_OPTIONS& aOptions )
{
m_hiContrastEnabled = aOptions.ContrastModeDisplay;
// Whether to draw tracks, vias & pads filled or as outlines
m_sketchModeSelect[PADS_VISIBLE] = !aOptions.DisplayPadFill;
m_sketchModeSelect[VIAS_VISIBLE] = !aOptions.DisplayViaFill;
m_sketchModeSelect[TRACKS_VISIBLE] = !aOptions.DisplayPcbTrackFill;
}
......@@ -217,9 +228,38 @@ void PCB_PAINTER::draw( const TRACK* aTrack )
m_gal->SetLineCap( LINE_CAP_ROUND );
m_gal->SetLineJoin( LINE_JOIN_ROUND );
m_gal->SetLineWidth( aTrack->GetWidth() );
m_gal->SetStrokeColor( strokeColor );
if( m_pcbSettings->m_sketchModeSelect[TRACKS_VISIBLE] )
{
// Outline mode
VECTOR2D line = end - start;
double length = line.EuclideanNorm();
int width = aTrack->GetWidth();
m_gal->SetLineWidth( m_pcbSettings->m_outlineWidth );
m_gal->SetIsFill( false );
m_gal->SetIsStroke( true );
m_gal->Save();
m_gal->Translate( start );
m_gal->Rotate( line.Angle() );
m_gal->DrawLine( VECTOR2D( 0, width / 2 ),
VECTOR2D( length, width / 2 ) );
m_gal->DrawLine( VECTOR2D( 0, -width / 2 ),
VECTOR2D( length, -width / 2 ) );
m_gal->DrawArc( VECTOR2D( 0, 0 ), width / 2, M_PI / 2, 3 * M_PI / 2 );
m_gal->DrawArc( VECTOR2D( length, 0 ), width / 2, M_PI / 2, -M_PI / 2 );
m_gal->Restore();
}
else
{
// Filled mode
m_gal->SetIsFill( true );
m_gal->SetIsStroke( false );
m_gal->SetLineWidth( aTrack->GetWidth() );
m_gal->DrawLine( start, end );
}
}
......@@ -227,36 +267,69 @@ void PCB_PAINTER::draw( const SEGVIA* aVia, int aLayer )
{
VECTOR2D center( aVia->GetStart() );
double radius;
COLOR4D fillColor;
COLOR4D color;
// Choose drawing settings depending on if we are drawing via's pad or hole
if( aLayer == ITEM_GAL_LAYER( VIAS_VISIBLE ) )
{
radius = aVia->GetWidth() / 2.0f;
radius = aVia->GetWidth() / 2.0;
}
else if( aLayer == ITEM_GAL_LAYER( VIA_HOLES_VISIBLE ) )
{
radius = aVia->GetDrillValue() / 2.0f;
radius = aVia->GetDrillValue() / 2.0;
}
else
return;
fillColor = getLayerColor( aLayer, aVia->GetNet() );
color = getLayerColor( aLayer, aVia->GetNet() );
m_gal->SetIsStroke( false );
if( m_pcbSettings->m_sketchModeSelect[VIAS_VISIBLE] )
{
// Outline mode
m_gal->SetIsFill( false );
m_gal->SetIsStroke( true );
m_gal->SetLineWidth( m_pcbSettings->m_outlineWidth );
m_gal->SetStrokeColor( color );
m_gal->DrawCircle( center, radius );
}
else
{
// Filled mode
m_gal->SetIsFill( true );
m_gal->SetFillColor( fillColor );
m_gal->SetIsStroke( false );
m_gal->SetFillColor( color );
m_gal->DrawCircle( center, radius );
}
}
void PCB_PAINTER::draw( const D_PAD* aPad, int aLayer )
{
COLOR4D fillColor;
COLOR4D color;
VECTOR2D size;
PAD_SHAPE_T shape;
double m, n;
color = getLayerColor( aLayer, aPad->GetNet() );
if( m_pcbSettings->m_sketchModeSelect[PADS_VISIBLE] )
{
// Outline mode
m_gal->SetIsFill( false );
m_gal->SetIsStroke( true );
m_gal->SetLineCap( LINE_CAP_ROUND );
m_gal->SetLineJoin( LINE_JOIN_MITER );
m_gal->SetLineWidth( m_pcbSettings->m_outlineWidth );
m_gal->SetStrokeColor( color );
}
else
{
// Filled mode
m_gal->SetIsFill( true );
m_gal->SetIsStroke( false );
m_gal->SetFillColor( color );
}
m_gal->Save();
m_gal->Translate( VECTOR2D( aPad->GetPosition() ) );
m_gal->Rotate( -aPad->GetOrientation() * M_PI / 1800.0 ); // orientation is in tenths of degree
......@@ -265,23 +338,17 @@ void PCB_PAINTER::draw( const D_PAD* aPad, int aLayer )
if( aLayer == ITEM_GAL_LAYER( PAD_HOLES_VISIBLE ) )
{
// Drawing hole
size = VECTOR2D( aPad->GetDrillSize() ) / 2.0f;
size = VECTOR2D( aPad->GetDrillSize() ) / 2.0;
shape = aPad->GetDrillShape();
}
else
{
// Drawing every kind of pad
m_gal->Translate( VECTOR2D( aPad->GetOffset() ) );
size = VECTOR2D( aPad->GetSize() ) / 2.0f;
size = VECTOR2D( aPad->GetSize() ) / 2.0;
shape = aPad->GetShape();
}
fillColor = getLayerColor( aLayer, aPad->GetNet() );
m_gal->SetIsFill( true );
m_gal->SetIsStroke( false );
m_gal->SetFillColor( fillColor );
switch( shape )
{
case PAD_OVAL:
......@@ -290,19 +357,43 @@ void PCB_PAINTER::draw( const D_PAD* aPad, int aLayer )
m = ( size.y - size.x );
n = size.x;
if( m_pcbSettings->m_sketchModeSelect[PADS_VISIBLE] )
{
// Outline mode
m_gal->DrawArc( VECTOR2D( 0, -m ), n, -M_PI, 0 );
m_gal->DrawArc( VECTOR2D( 0, m ), n, M_PI, 0 );
m_gal->DrawLine( VECTOR2D( -n, -m ), VECTOR2D( -n, m ) );
m_gal->DrawLine( VECTOR2D( n, -m ), VECTOR2D( n, m ) );
}
else
{
// Filled mode
m_gal->DrawCircle( VECTOR2D( 0, -m ), n );
m_gal->DrawCircle( VECTOR2D( 0, m ), n );
m_gal->DrawRectangle( VECTOR2D( -n, -m ), VECTOR2D( n, m ) );
}
}
else
{
m = ( size.x - size.y );
n = size.y;
if( m_pcbSettings->m_sketchModeSelect[PADS_VISIBLE] )
{
// Outline mode
m_gal->DrawArc( VECTOR2D( -m, 0 ), n, M_PI / 2, 3 * M_PI / 2 );
m_gal->DrawArc( VECTOR2D( m, 0 ), n, M_PI / 2, -M_PI / 2 );
m_gal->DrawLine( VECTOR2D( -m, -n ), VECTOR2D( m, -n ) );
m_gal->DrawLine( VECTOR2D( -m, n ), VECTOR2D( m, n ) );
}
else
{
// Filled mode
m_gal->DrawCircle( VECTOR2D( -m, 0 ), n );
m_gal->DrawCircle( VECTOR2D( m, 0 ), n );
m_gal->DrawRectangle( VECTOR2D( -m, -n ), VECTOR2D( m, n ) );
}
}
break;
case PAD_RECT:
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment