Commit 5080d4cc authored by Dick Hollenbeck's avatar Dick Hollenbeck

cleanups

parent 6dc85d1c
......@@ -7,7 +7,7 @@ email address.
2012-Mar-11 UPDATE Dick Hollenbeck <dick@softplc.com>
================================================================================
++pcbnew
* Add PCB_EDIT_FRAME::syncLayerVisibilities, PCB_LAYER_MANAGER::SyncLayerVisibilities().
* Add PCB_EDIT_FRAME::syncLayerVisibilities(), PCB_LAYER_MANAGER::SyncLayerVisibilities().
* Save all visibilities, layer and render, in BOARD and restore on load.
......
......@@ -455,7 +455,7 @@ void SCH_EDIT_FRAME::OnCancelCurrentCommand( wxCommandEvent& aEvent )
void SCH_EDIT_FRAME::OnSelectTool( wxCommandEvent& aEvent )
{
int id = aEvent.GetId();
id_eeschema_frm id = (id_eeschema_frm) aEvent.GetId();
// Stop the current command and deselect the current tool.
m_canvas->EndMouseCapture( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor() );
......
......@@ -496,7 +496,7 @@ private:
/**
* m_Offset is useful only for oblong pads (it can be used for other
* shapes, but without any interest).
* this is the offset between the pad hole and the pad shape (you must
* This is the offset between the pad hole and the pad shape (you must
* understand here pad shape = copper area around the hole)
* Most of cases, the hole is the center of the shape (m_Offset = 0).
* But some board designers use oblong pads with a hole moved to one of the
......
......@@ -30,14 +30,16 @@ static PAD_SHAPE_T CodeShape[] = {
};
#define NBTYPES 4
static PAD_ATTR_T CodeType[NBTYPES] = {
static PAD_ATTR_T CodeType[] = {
PAD_STANDARD, PAD_SMD, PAD_CONN, PAD_HOLE_NOT_PLATED
};
#define NBTYPES DIM(CodeType)
// Default mask layers setup for pads according to the pad type
static long Std_Pad_Layers[NBTYPES] =
{
static long Std_Pad_Layers[] = {
// PAD_STANDARD:
PAD_STANDARD_DEFAULT_LAYERS,
......@@ -85,17 +87,31 @@ private:
static wxSize prevSize;
void initValues();
bool PadValuesOK(); // test if all values are acceptable for the pad
bool PadValuesOK(); ///< test if all values are acceptable for the pad
void OnPadShapeSelection( wxCommandEvent& event );
void OnDrillShapeSelected( wxCommandEvent& event );
void PadOrientEvent( wxCommandEvent& event );
void PadTypeSelected( wxCommandEvent& event );
/// Updates the different parameters for the component being edited.
void PadPropertiesAccept( wxCommandEvent& event );
/**
* Function SetPadLayersList
* updates the CheckBox states in pad layers list,
* @param layer_mask = pad layer mask (ORed layers bit mask)
*/
void SetPadLayersList( long layer_mask );
void OnSetLayers( wxCommandEvent& event );
void OnCancelButtonClick( wxCommandEvent& event );
void OnPaintShowPanel( wxPaintEvent& event );
bool TransfertDataToPad( D_PAD* aPad );
/// Called when a dimension has changed.
/// Update the graphical pad shown in the panel.
void OnValuesChanged( wxCommandEvent& event );
};
......@@ -160,6 +176,7 @@ void DIALOG_PAD_PROPERTIES::OnPaintShowPanel( wxPaintEvent& event )
drawInfo.m_Offset = m_dummyPad->GetPosition();
drawInfo.m_Display_padnum = true;
drawInfo.m_Display_netname = true;
if( m_dummyPad->GetAttribute() == PAD_HOLE_NOT_PLATED )
drawInfo.m_ShowNotPlatedHole = true;
......@@ -195,9 +212,9 @@ void DIALOG_PAD_PROPERTIES::OnPaintShowPanel( wxPaintEvent& event )
}
void PCB_BASE_FRAME::InstallPadOptionsFrame( D_PAD* Pad )
void PCB_BASE_FRAME::InstallPadOptionsFrame( D_PAD* aPad )
{
DIALOG_PAD_PROPERTIES dlg( this, Pad );
DIALOG_PAD_PROPERTIES dlg( this, aPad );
dlg.ShowModal();
}
......@@ -560,7 +577,7 @@ void DIALOG_PAD_PROPERTIES::PadTypeSelected( wxCommandEvent& event )
int ii;
ii = m_PadType->GetSelection();
if( (ii < 0) || ( ii >= NBTYPES) )
if( ii < 0 || ii >= NBTYPES )
ii = 0;
layer_mask = Std_Pad_Layers[ii];
......@@ -569,6 +586,7 @@ void DIALOG_PAD_PROPERTIES::PadTypeSelected( wxCommandEvent& event )
// Enable/disable drill dialog items:
event.SetId( m_DrillShapeCtrl->GetSelection() );
OnDrillShapeSelected( event );
if( ii == 0 || ii == NBTYPES-1 )
m_DrillShapeCtrl->Enable( true );
else
......@@ -584,11 +602,6 @@ void DIALOG_PAD_PROPERTIES::PadTypeSelected( wxCommandEvent& event )
void DIALOG_PAD_PROPERTIES::SetPadLayersList( long layer_mask )
/** SetPadLayersList
* Update the CheckBoxes state in pad layers list,
* @param layer_mask = pad layer mask (ORed layers bit mask)
*/
{
if( ( layer_mask & ALL_CU_LAYERS ) == LAYER_FRONT )
m_rbCopperLayersSel->SetSelection(0);
......@@ -599,22 +612,22 @@ void DIALOG_PAD_PROPERTIES::SetPadLayersList( long layer_mask )
else
m_rbCopperLayersSel->SetSelection(3);
m_PadLayerAdhCmp->SetValue( ( layer_mask & ADHESIVE_LAYER_FRONT ) );
m_PadLayerAdhCu->SetValue( ( layer_mask & ADHESIVE_LAYER_BACK ) );
m_PadLayerAdhCmp->SetValue( bool( layer_mask & ADHESIVE_LAYER_FRONT ) );
m_PadLayerAdhCu->SetValue( bool( layer_mask & ADHESIVE_LAYER_BACK ) );
m_PadLayerPateCmp->SetValue( ( layer_mask & SOLDERPASTE_LAYER_FRONT ) );
m_PadLayerPateCu->SetValue( ( layer_mask & SOLDERPASTE_LAYER_BACK ) );
m_PadLayerPateCmp->SetValue( bool( layer_mask & SOLDERPASTE_LAYER_FRONT ) );
m_PadLayerPateCu->SetValue( bool( layer_mask & SOLDERPASTE_LAYER_BACK ) );
m_PadLayerSilkCmp->SetValue( ( layer_mask & SILKSCREEN_LAYER_FRONT ) );
m_PadLayerSilkCu->SetValue( ( layer_mask & SILKSCREEN_LAYER_BACK ) );
m_PadLayerSilkCmp->SetValue( bool( layer_mask & SILKSCREEN_LAYER_FRONT ) );
m_PadLayerSilkCu->SetValue( bool( layer_mask & SILKSCREEN_LAYER_BACK ) );
m_PadLayerMaskCmp->SetValue( ( layer_mask & SOLDERMASK_LAYER_FRONT ) );
m_PadLayerMaskCu->SetValue( ( layer_mask & SOLDERMASK_LAYER_BACK ) );
m_PadLayerMaskCmp->SetValue( bool( layer_mask & SOLDERMASK_LAYER_FRONT ) );
m_PadLayerMaskCu->SetValue( bool( layer_mask & SOLDERMASK_LAYER_BACK ) );
m_PadLayerECO1->SetValue( ( layer_mask & ECO1_LAYER ) );
m_PadLayerECO2->SetValue( ( layer_mask & ECO2_LAYER ) );
m_PadLayerECO1->SetValue( bool( layer_mask & ECO1_LAYER ) );
m_PadLayerECO2->SetValue( bool( layer_mask & ECO2_LAYER ) );
m_PadLayerDraft->SetValue( ( layer_mask & DRAW_LAYER ) );
m_PadLayerDraft->SetValue( bool( layer_mask & DRAW_LAYER ) );
}
......@@ -625,6 +638,7 @@ void DIALOG_PAD_PROPERTIES::OnSetLayers( wxCommandEvent& event )
m_panelShowPad->Refresh();
}
// test if all values are acceptable for the pad
bool DIALOG_PAD_PROPERTIES::PadValuesOK()
{
......@@ -697,12 +711,10 @@ if you do not want this pad plotted in gerber files");
return error_msgs.GetCount() == 0;
}
void DIALOG_PAD_PROPERTIES::PadPropertiesAccept( wxCommandEvent& event )
/* Updates the different parameters for the component being edited.
*/
void DIALOG_PAD_PROPERTIES::PadPropertiesAccept( wxCommandEvent& event )
{
if( ! PadValuesOK() )
if( !PadValuesOK() )
return;
bool rastnestIsChanged = false;
......@@ -988,6 +1000,7 @@ bool DIALOG_PAD_PROPERTIES::TransfertDataToPad( D_PAD* aPad )
case PAD_CONN:
case PAD_SMD:
// Offset is a translation of border relative to hole. SMD has no hole.
aPad->SetOffset( wxPoint( 0, 0 ) );
aPad->SetDrillSize( wxSize( 0, 0 ) );
break;
......@@ -1054,8 +1067,6 @@ bool DIALOG_PAD_PROPERTIES::TransfertDataToPad( D_PAD* aPad )
}
// Called when a dimension has change.
// Update the pad dimensions shown in the panel.
void DIALOG_PAD_PROPERTIES::OnValuesChanged( wxCommandEvent& event )
{
if( m_canUpdate )
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment