Configuration and compile documentation improvements.

* Improve the stable and testing build version option logic.
* Use CMake FindPythonInterp to configure the Python interpreter.
* Use Python interpreter to determine the system Python module install
  path if not already defined on the command line.
* Add header symbol checks for asinh(), acosh(), and atanh().
* Add test source to check for isinf() which can be defined as a C++template.
* Replace conditional compile on windows systems for aXXXh() with CMake
  configuration tests.
* A few minor MSVC compile fixes.
* Fix incorrect python environment string in fixswigimports.py
* Create a separate document for KiCad CMake build options.
* Create a separate how to compile KiCad on Windows document.

CMakeLists.txt

@@ -61,29 +61,22 @@ option(KICAD_SCRIPTING_WXPYTHON
 # PYTHON_EXECUTABLE can be defined when invoking cmake
 # ( use -DPYTHON_EXECUTABLE=<python path>/python.exe or python2 )
 # when not defined by user, the default is python.exe under Windows and python2 for others
-# python binary filee should be is exec path.
+# python binary file should be is exec path.
 
 
 #Set version option (stable or testing)
 
-if (KICAD_STABLE_VERSION )
-    if ( KICAD_TESTING_VERSION )
-        message( FATAL_ERROR
-        "Please set to ON only one option KICAD_TESTING_VERSION or KICAD_STABLE_VERSION" )
-    endif( KICAD_TESTING_VERSION )
+if(KICAD_STABLE_VERSION AND KICAD_TESTING_VERSION )
+    message(FATAL_ERROR "Only one KiCad build version option KICAD_TESTING_VERSION or KICAD_STABLE_VERSION can be set to ON")
+elif(NOT KICAD_STABLE_VERSION AND NOT KICAD_TESTING_VERSION)
+    message(FATAL_ERROR "Either KiCad build version option KICAD_TESTING_VERSION or KICAD_STABLE_VERSION must be set to ON")
+elif(KICAD_STABLE_VERSION)
     add_definitions(-DKICAD_STABLE_VERSION)
-    message( "Build stable version of Kicad" )
-else (KICAD_STABLE_VERSION )
-    if (KICAD_TESTING_VERSION )
+    message( "Build stable version of KiCad")
+else(KICAD_STABLE_VERSION AND KICAD_TESTING_VERSION)
     add_definitions(-DKICAD_TESTING_VERSION)
-        message( "Build testing (unstable) version of Kicad" )
-    else (KICAD_TESTING_VERSION )
-        message( "Please set to ON one option of KICAD_TESTING_VERSION or KICAD_STABLE_VERSION" )
-        message( "When calling cmake add option -DKICAD_STABLE_VERSION=ON" )
-        message( "or add option -DKICAD_TESTING_VERSION=ON" )
-        message( FATAL_ERROR "one option of KICAD_TESTING_VERSION or KICAD_STABLE_VERSION must be defined" )
-    endif(KICAD_TESTING_VERSION )
-endif(KICAD_STABLE_VERSION )
+    message("Build testing (unstable) version of KiCad")
+endif(KICAD_STABLE_VERSION AND KICAD_TESTING_VERSION)
 
 
 #================================================
@@ -291,22 +284,30 @@ if(WIN32 AND USE_WX_GRAPHICS_CONTEXT)
 endif(WIN32 AND USE_WX_GRAPHICS_CONTEXT)
 
 # Find Python and other scripting resources
-if (KICAD_SCRIPTING OR KICAD_SCRIPTING_MODULES)
+if(KICAD_SCRIPTING OR KICAD_SCRIPTING_MODULES)
+    set(PythonInterp_FIND_VERSION)
+    find_package(PythonInterp)
+    check_find_package_result(PYTHONINTERP_FOUND "Python Interpreter")
+
+    # Get the correct Python site package install path from the Python interpreter found by
+    # FindPythonInterp unless the user specifically defined a custom path.
+    if(NOT PYTHON_SITE_PACKAGE_PATH)
+        execute_process(COMMAND ${PYTHON_EXECUTABLE} -c "import distutils.sysconfig;print\"%s\"%distutils.sysconfig.get_python_lib()"
+            OUTPUT_VARIABLE PYTHON_SITE_PACKAGE_PATH
+            OUTPUT_STRIP_TRAILING_WHITESPACE
+            )
 
-    if( "${PYTHON_EXECUTABLE}" STREQUAL  "" )
-        if(WIN32)
-            SET( PYTHON_EXECUTABLE "python.exe" )
-        else(WIN32)
-            SET( PYTHON_EXECUTABLE "python2" )
-        endif(WIN32)
-    endif()
+        if(NOT PYTHON_SITE_PACKAGE_PATH)
+            message(FATAL_ERROR "Error occurred while attemping to find the Python site library path.")
+        endif(NOT PYTHON_SITE_PACKAGE_PATH)
+    endif(NOT PYTHON_SITE_PACKAGE_PATH)
 
-  execute_process(COMMAND ${PYTHON_EXECUTABLE} -c "import sys;print\"%s.%s\"%sys.version_info[0:2]" OUTPUT_VARIABLE PYTHON_VERSION OUTPUT_STRIP_TRAILING_WHITESPACE)
-  set(PYTHON_DEST "lib/python${PYTHON_VERSION}/dist-packages" )
+    set(PYTHON_DEST "${PYTHON_SITE_PACKAGE_PATH}" CACHE PATH "Python module install path.")
+    mark_as_advanced(PYTHON_DEST)
+    message( STATUS "Python module install path: ${PYTHON_DEST}")
     find_package(PythonLibs)
     include_directories(${PYTHON_INCLUDE_PATH}
                         ./scripting)
-
 endif(KICAD_SCRIPTING OR KICAD_SCRIPTING_MODULES)
 
 

CMakeModules/PerformFeatureChecks.cmake

@@ -42,6 +42,9 @@ macro(perform_feature_checks)
     #include(CheckFunctionExists)
     include(CheckLibraryExists)
     include(CheckSymbolExists)
+    include(CheckIncludeFileCXX)
+    include(CheckCXXSymbolExists)
+    include(CheckCXXSourceCompiles)
 
     check_include_file("malloc.h" HAVE_MALLOC_H)
 
@@ -70,8 +73,21 @@ macro(perform_feature_checks)
     check_symbol_exists(_stricmp "string.h" HAVE_ISO_STRICMP)
     check_symbol_exists(_strnicmp "string.h" HAVE_ISO_STRNICMP)
     check_symbol_exists(_snprintf "stdio.h" HAVE_ISO_SNPRINTF)
+
+    # Check for functions in math.h.
+    check_include_file("math.h" HAVE_MATH_H)
     check_symbol_exists(_hypot "math.h" HAVE_ISO_HYPOT)
 
+    # Check for functions in C++ cmath.
+    check_include_file_cxx(cmath HAVE_CXX_CMATH)
+    check_cxx_symbol_exists(asinh cmath HAVE_CMATH_ASINH )
+    check_cxx_symbol_exists(acosh cmath HAVE_CMATH_ACOSH )
+    check_cxx_symbol_exists(atanh cmath HAVE_CMATH_ATANH )
+
+    # CMakes check_cxx_symbol_exists() doesn't work for templates so we must create a
+    # small program to verify isinf() exists in cmath.
+    check_cxx_source_compiles( "#include <cmath>\nusing namespace std;\nint main(int argc, char** argv)\n{\n  (void)argv;\n  isinf(1.0);  (void)argc;\n  return 0;\n}\n"  HAVE_CMATH_ISINF )
+
     #check_symbol_exists(clock_gettime "time.h" HAVE_CLOCK_GETTIME) non-standard library, does not work
     check_library_exists(rt clock_gettime "" HAVE_CLOCK_GETTIME)
 

CMakeModules/config.h.cmake

@@ -17,13 +17,30 @@
 #define snprintf _snprintf
 #endif
 
+
+// Handle platform differences in math.h
+#cmakedefine HAVE_MATH_H
+
 #cmakedefine HAVE_ISO_HYPOT
 
 #if defined( HAVE_ISO_HYPOT )
 #define hypot _hypot
 #endif
 
+
+// Handle platform differences in C++ cmath.
+#cmakedefine HAVE_CXX_CMATH
+
+#cmakedefine HAVE_CMATH_ASINH
+
+#cmakedefine HAVE_CMATH_ACOSH
+
+#cmakedefine HAVE_CMATH_ATANH
+
+#cmakedefine HAVE_CMATH_ISINF
+
 #cmakedefine HAVE_CLOCK_GETTIME
+
 #cmakedefine HAVE_GETTIMEOFDAY_FUNC
 
 #cmakedefine MALLOC_IN_STDLIB_H

Documentation/compiling/COMPILING.txt

@@ -170,42 +170,8 @@ If linux, run instead the following command:
 Make the Debug binaries:
     make
 
-
-Fine-tune Build Process
------------------------
-These should be set from command line:
-
-One of these 2 option *must* be set to ON:
-  KICAD_STABLE_VERSION or KICAD_TESTING_VERSION
-    ** KICAD_STABLE_VERSION:
-    set this option to ON to build the stable version of KICAD. mainly used to set version ID
-    Usually set for kicad version downloaded from stable branch
-
-    ** KICAD_TESTING_VERSION
-    set this option to ON to build the stable version of KICAD. mainly used to set version ID
-    Usually set for kicad version downloaded from testing branch
-
- CMAKE_BUILD_TYPE Release/Debug (REQUIRED)
-   Choose build type: Release/Debug.
-
- wxWidgets_USE_STATIC ON/OFF (OPTIONAL)
-
- CMAKE_VERBOSE_MAKEFILE ON/OFF (OPTIONAL)
-   Turns ON/OFF verbose build messages.
-   You can also pass VERBOSE=1 to make for the same effect.
-
- CMAKE_INSTALL_PREFIX (OPTIONAL)
-
- USE_WX_GRAPHICS_CONTEXT ON/OFF (OPTIONAL)
-   *Experimental* advanced drawing library code using wxGraphicsContext (for tests only).
-   Under Windows, a very recent version of mingw is needed.
-   It requires wxWidgets to be built with the --enable-graphics_ctx switch.
-   See building wxWidgets above.
-
- USE_IMAGES_IN_MENUS ON/OFF (OPTIONAL)
-   Force building Kicad with or without images in menu items.  If this is not defined on
-   when CMake is used to create the build files, images will be included in menu items
-   on all platforms except OSX.
-
 Note: that it is easy to build only a specific binary such as pcbnew alone:
     make pcbnew
+
+
+See ./cmake_config.txt for customizing the KiCad build setting.

Documentation/compiling/build-config.txt

+KiCad uses CMake to generate the build files specific for the target platform
+specified by the developer.  This document attempts to define some of the more
+common CMake and KiCad build configuration settings.  You can use CMake either
+by the command CMake on or the graphical version ccmake.  This document only
+documents a very small subset of the total CMake documentation  For all of the
+gory details, please see the complete CMake documentation at:
+
+http://www.cmake.org/cmake/help/documentation.html.
+
+
+Useful CMake Build Settings.
+----------------------------
+This section defines some of the more common CMake build configuration setting
+used when configuring KiCad.  These settings are valid for all projects that
+use CMake.
+
+Changing the Build Generator.
+-----------------------------
+CMake attempts to create the project build system based on the platform.  On
+Posix systems CMake will create Unix Makefiles to build KiCad.  On Windows
+systems CMake will attempt to find the latest version of Visual C++ installed
+on the system and create the appropriate project files.  This behavior can be
+changed by specifying the project generator using the -G "Project Generator"
+switch on the command line.  Please note, only a small subset of these project
+generators are supported.  If you want to use Eclipse on Linux to build KiCad,
+you may be in for a lot of work.
+
+CMAKE_BUILD_TYPE (Release/Debug/RelWithDebInfo/MinSizeRel)
+----------------------------------------------------------
+When configuring the KiCad build for the command line you must specify build
+type.  To create a debug build, set CMAKE_BUILD_TYPE to Debug.  To create a
+release build, set CMAKE_BUILD_TYPE to Release.  See the CMake documentation
+for other build types.  For IDE project files, the build type can be selected
+by the IDE configuration manager.
+
+CMAKE_INSTALL_PATH (InstallPath)
+--------------------------------
+By default CMake will select the correct install path for your platform.  If
+you wish to install KiCad in a custom location, set CMAKE_INSTALL_PATH to the
+path where you want to install KiCad.  Please note that the default install
+path that CMake chooses will likely overwrite the current version of KiCad
+installed on your system.
+
+
+wxWidgets Library Configuration.
+--------------------------------
+KiCad is built using the wxWidgets library.  The following options allow you
+to specifically tailor the wxWidgets library configuration.  For the complete
+list of wxWidgets setting see CMakeModules/FindwxWidgets.cmake in the KiCad
+source.
+
+wxWidgets_ROOT_DIR (NonDefaultwxWidgetsPath)
+--------------------------------------------
+CMake looks in the standard platform locations to find the default version of
+the wxWidgets library.  If you wish to use a custom built wxWidgets library,
+set wxWidgets_ROOT_DIR to the correct path.
+
+wxWidgets_USE_DEBUG (ON/OFF)
+----------------------------
+When creating a debug build of KiCad, it is often useful to link against the
+debug build of the wxWidgets.  To use the debug build of wxWidgets, set
+wxWidgets_USE_DEBUG to ON.
+
+wxWidgets_USE_UNICODE (ON/OFF)
+------------------------------
+If you platform supports Unicode and you wish to build KiCad with Unicode
+support, set wxWidgets_USE_UNICODE to ON.  Please note as of the 2.9 branch
+this option is not required.
+
+
+KiCad Specific Options
+----------------------
+All of the configuration settings below are specific to the KiCad project.
+If for any reason you add or remove a build option to the KiCad CMake files,
+please update the list below.
+
+KICAD_STABLE_VERSION (ON/OFF)
+-----------------------------
+This option enables or disables the stable version string to be created and
+used when building KiCad.  It is mutually exclusive with KICAD_TESTING_VERSION.
+
+KICAD_TESTING_VERSION (ON/OFF)
+------------------------------
+This option enables or disables the testing version string to be created and
+used when building KiCad.  It is mutually exclusive with KICAD_STABLE_VERSION.
+
+USE_WX_GRAPHICS_CONTEXT (ON/OFF)
+--------------------------------
+This option is *Experimental* and used the advanced drawing library code
+using wxGraphicsContext and should only be used for testing purposes.
+Under Windows, a very recent version of mingw is needed.  It also requires
+wxWidgets to be built with the --enable-graphics_ctx configuration switch.
+
+USE_IMAGES_IN_MENUS (ON/OFF)
+----------------------------
+This option is used to enable or disable building KiCad with images in menu
+items.  If this is not defined when CMake is used to create the build files,
+images will be included in menu items on all platforms except OSX.
+
+USE_PCBNEW_NANOMETRES (ON/OFF)
+This option is used to enable or disable the nano-meter internal units for
+Pcbnew.  The default is ON.
+
+KICAD_GOST (ON/OFF)
+-------------------
+This option is used to enable or disable the GOST notation for multiple gates
+per package in Eeschema.  The default is  OFF
+
+KICAD_KEEPCASE (ON/OFF)
+-----------------------
+This option enables or disables turning off the  automatic component name
+conversion to uppercase.  The default is OFF which means component names will
+be converted to upper case.
+
+USE_WX_OVERLAY (ON/OFF)
+-----------------------
+This option enables or disables wxOverlay for drawing operation on OSX.  It is
+OFF by default on all platforms except OSX.  Warning, this is experimental!
+
+KICAD_SCRIPTING (ON/OFF)
+------------------------
+This option enables or disables building Python scripting support for KiCad.
+The default is OFF.  Currently only Pcbnew is supported.  This option requires
+that SWIG and Python are installed on the system.
+
+KICAD_SCRIPTING_MODULES (ON/OFF)
+--------------------------------
+This option enables or disables building the KiCad modules that can be used
+from scripting languages.  The default is OFF.  Currently only Pcbnew is
+supported.  This option requires that SWIG and Python are installed on the
+system.
+
+KICAD_SCRIPTING_WXPYTHON (ON/OFF)
+---------------------------------
+This option enables or disables building wxPython support into KiCad for
+python and py.shell.    The default is OFF.  Currently only Pcbnew is
+supported.  This option requires that SWIG, Python, and wxPython are
+installed on the system.
+
+PYTHON_SITE_PACKAGE_PATH (PATH)
+-------------------------------
+When building KiCad with Python scripting enable, the Python site library path
+is used by default.  If you want to install the KiCad Python extension in a
+different path, set this variable to the desired path.

Documentation/compiling/build-msw.txt

+Introduction
+------------
+This document details how to build KiCad from source on Windows.  The current
+supported method of building KiCad on Windows systems is to use MinGW/MSYS.
+Other build systems such as Visual Studio and Eclipse can be used but your
+mileage may vary.  If you choose to build KiCad with one of the unsupported
+tools, please do not expect a great deal of help from the KiCad developers
+unless you want to be the person that supports the build tool.  If you add
+or remove any of the KiCad  build dependencies, please update this document.
+
+Install Build Tools
+-------------------
+This section describes the tools required to build KiCad from source and how
+to install them.  Failure to install these tools properly will likely result
+in build errors.
+
+MinGW/MSYS
+----------
+MinGW/MSYS provides the compiler tools and a partial Posix environment useful
+for building software.  Download the MinGW installer from http://mingw.org.
+Run the installer and and verify MinGW and MSYS are checked.  You will also
+need to expand the MinGW entry and select C++ from the list of supported
+languages.  Only C is installed by default and C++ is required to build KiCad.
+
+Bazaar
+------
+KiCad uses the Bazaar version control system to track source code changes.
+The easiest way to get a copy of the KiCad source is to use Bazaar.  Bazaar
+can be download from http://http://wiki.bazaar.canonical.com/WindowsDownloads.
+Your best bet is to use the stand alone version of Bazaar rather than one of
+the Python specific versions.
+
+CMake
+-----
+The KiCad source uses CMake to make sure the system has the required software
+and libraries installed to properly compile the source.  Download the latest
+CMake installer from http://cmake.org.  Run the installer and make sure the
+add CMake to PATH variable check box is checked.  If you fail to do this step,
+the CMake executable will not be found.
+
+Doxygen (Optional)
+------------------
+Doxygen is used to generate HTML documentation of the KiCad source code.  While
+it is not necessary to install Doxygen, it is a very good way to learn your way
+around the KiCad code base.  It is highly recommended for new developers.  The
+latest Doxygen installer can be downloaded from http://www.stack.nl/~dimitri/
+doxygen/
+
+Python (Optional)
+-----------------
+KiCad supports the Python scripting language (currently only Pcbnew scripting
+exists).  Currently the Python scripting support will only build against the
+version 2 branch of Python.  The Python installer can be downloaded from http://
+www.python.org.
+
+SWIG (Optional)
+---------------
+SWIG is used to generate the Python scripting code.  It must be installed to
+build the Python scripting support.  Unfortunately there in no installer for
+windows.  You can download precompiled binaries from http://http://www.swig.
+org/download.html and install swig.exe.  Make sure the folder you install the
+SWIG binary into is in the system PATH.  Otherwise CMake will not be able to
+find it.
+
+NullSoft Installer System (Optional)
+------------------------------------
+The NullSoft Installer System (NSIS) is used to create a Windows installer for
+end users from the binaries created from the KiCad source along with the
+library and documentation files.  NSIS is typically only used be developers who
+create installers for end users and is not required if you install from source.
+NSIS can be downloaded from http://nsis.sourceforge.net/Download.
+
+
+Install and Build Libraries
+---------------------------
+This section documents installing and build all of the software libraries
+required to build KiCad.  As of now, these libraries have to be built because
+MinGW builds of these libraries are not readily available  Attempting to link
+programs built on MinGW with libraries from other compilers (namely Microsoft
+Visual C) is problematic.  It can be done but it is not painless.  As far as
+the author of this document knows, MinGW can only link to Visual Studio C
+libraries.  The name mangling of Visual Studio C++ is not compatible with the
+MinGW linker.
+
+Build and Install the wxWidgets Library
+---------------------------------------
+The wxWidgets library is the base that KiCad is built upon.  Version 2.9.4
+or later of wxWidgets should be used on Windows.  You may be able to build
+KiCad with older versions of wxWidgets but it is not recommended.  wxWidgets
+can be downloaded from http://http://www.wxwidgets.org/downloads/
+
+
+Unzip the wxWidgets zip file into your preferred build directory.  Avoid using
+spaces in the path names.  Some MinGW tools do not play well with them.  It is
+always best to error on the side of caution.
+
+Open MinGW and change to the wxWidgets source directory.  If you don't want to
+install the wxWidgets library into MinGW then enter the following commands:
+
+#mkdir Release
+#cd Release
+#../configure --with-opengl
+#make
+
+If you want to install wxWidgets in MinGW then enter the following commands:
+#mkdir Release
+#cd Release
+#../configure --prefix=/mingw --with-opengl
+#make && make install
+#move /mingw/lib/wxmsw*.dll /mingw/bin
+
+The last command is critical so that the libraries are in the MinGW PATH
+and can be found at run time.  If you want to build a full debugging version
+of wxWidgets, add --enable-debug to the configure command.  If you are going
+to use the GNU debugger, you may also want to build the debugging libraries
+with the extra GDB debugging information by adding --enable-debug_gdb to the
+configure command.
+
+Download the KiCad Source Code
+------------------------------
+You can use the Launchpad repository or a tar file for this.  See the wiki.
+To download files from  Launchpad repository, you need to install the Bazaar
+(bzr) version control system.
+
+Launchpad repository has two branches for KiCad sources:
+- a testing branch (used by developers)
+- a stable branch (a copy of the testing branch, when this testing branch is
+  near a stable state)
+
+To download the testing branch:
+#bzr branch lp:kicad kicad_testing
+
+To download the stable branch:
+#bzr branch lp:kicad/stable kicad_stable
+
+To download the component and footprint libraries
+#bzr branch lp:~kicad-lib-committers/kicad/library kicad_libraries
+
+To download the documentation and translation files:
+#bzr branch lp:~kicad-developers/kicad/doc kicad_doc
+
+Create Makefiles with CMake
+---------------------------
+Open your Msys shell.  Create two "out of source" build directories at the
+command line enter the following commands:
+
+#cd <kicadSource>
+#mkdir -p build/release         # Build path can be anywhere you prefer.
+#mkdir build/debug              # Only if you want a debug version of KiCad.
+
+To create a release build of KiCad, run the following command:
+#cd build
+#cmake -G "MSYS Makefiles"                  \  # Back slashes are not required
+       -DCMAKE_BUILD_TYPE=Release           \  # and are for formatting only.
+       -DKICAD_TESTING_VERSION=ON ../../
+
+If the configuration fails, you have failed to install the required software
+on you system.  The error message should give you a good indication of what is
+missing.  You must resolve this before you can build KiCad.
+
+Compiling the Code
+------------------
+To build KiCad, at the command line enter following comnands:
+
+#cd <kicadSource>/build/release
+#make
+
+Installing KiCad
+----------------
+To install Kicad, at the command line enter the following commands:
+
+#cd <kicadSource>/build/release
+#make install
+
+If you get any errors during the installation, you probably do not have the
+appropriate privileges to the install path.  Take a look at CMakeCache.txt
+that was created when you ran CMake, and in particular look at the value of
+the CMAKE_INSTALL_PREFIX variable.  This is where KiCad will be installed.  If
+this not where you want KiCad installed, edit it with a text editor rerun the
+make install command.  You do not have the appropriate privileges to install
+KiCad in the CMAKE_INSTALL_PATH, run the make install command as administrator.
+
+You are now done unless you want to make a Debug build.
+
+
+Compiling a Debug version
+-------------------------
+To create a debug version of KiCad, enter the following commands:
+
+#cd <kicadSource>/build/debug
+#cmake -G "MSYS Makefiles"                       \
+       -DCMAKE_BUILD_TYPE=Debug                  \
+       -DKICAD_TESTING_VERSION=ON ../../
+#make
+
+Generally speaking you do not install debug binaries.  They can be debugged in
+place.  To monitor the debugging output, you can download the Windows debug
+viewer DbgView from http://technet.microsoft.com/en-us/sysinternals/
+bb896647.aspx
+
+Compiling the Python Scripting Support.
+---------------------------------------
+
+Before building KiCad Python scripting extension, you must create a MinGW
+compatible Python link library.  The directions to do this can be found in
+the "How do I create Python extensions?" FAQ at http://www.mingw.org/wiki/FAQ.
+
+To build KiCad with Python scripting support, run CMake as follows and then
+compile the source as described above.
+
+#cmake -G "MSYS Makefiles"                       \
+       -DCMAKE_BUILD_TYPE=Release                \
+       -DKICAD_PYTHON_SCRIPTING=ON               \
+       -DKICAD_PYTHON_MODULES=ON                 \
+       -DKICAD_TESTING_VERSION=ON ../../
+
+You only need to include the KICAD_PYTHON_MODULES option if you want to
+install the python modules that ship with KiCad.  Also note that the wxPython
+support cannot be compiled on Windows at this time due to library conflicts
+between MinGW and Python.  Work is currently underway by the KiCad developers
+to provide a MinGW build of Python which should resolve this issue.
+
+Building the Developer Documentation
+------------------------------------
+To build the HTML developer documentation, run the following commands:
+
+#cd <kicadSource>/build/debug
+#make doxygen-docs
+
+The documentation will be created in the <kicadSouce>/Documenation/html
+directory.

common/class_plotter.cpp

@@ -387,7 +387,8 @@ void PLOTTER::segmentAsOval( const wxPoint& start, const wxPoint& end, int width
     else if( size.x == 0 )
         orient = 900;
     else
-        orient = -(int) ( RAD2DEG( atan2( size.y, size.x ) ) * 10.0 );
+        orient = -(int) ( RAD2DEG( atan2( (double)size.y, (double)size.x ) ) * 10.0 );
+
     size.x = (int) sqrt( ( (double) size.x * size.x )
                        + ( (double) size.y * size.y ) ) + width;
     size.y = width;

eeschema/sch_component.cpp

@@ -519,7 +519,7 @@ void SCH_COMPONENT::SetRef( const SCH_SHEET_PATH* sheet, const wxString& ref )
 }
 
 
-void SCH_COMPONENT::SetTimeStamp( long aNewTimeStamp )
+void SCH_COMPONENT::SetTimeStamp( time_t aNewTimeStamp )
 {
     wxString string_timestamp, string_oldtimestamp;
 

pcb_calculator/transline/transline.cpp

@@ -25,6 +25,9 @@
 #include <transline.h>
 #include <units.h>
 
+using namespace std;
+
+
 #ifndef INFINITY
 #define INFINITY std::numeric_limits<double>::infinity()
 #endif
@@ -34,35 +37,11 @@
 #define M_PI_2 (M_PI/2)
 #endif
 
-#ifdef _MSC_VER
+#ifndef HAVE_CMATH_ISINF
 inline bool isinf(double x)
 {
     return x == INFINITY; // return true if x is infinity
 }
-
-inline double asinh(double x)
-{
-  return log(x+sqrt(x*x+1));
-}
-
-inline double acosh(double x)
-{
-  // must be x>=1, if not return Nan (Not a Number)
-  if(!(x>=1.0)) return sqrt(-1.0);
-
-  // return only the positive result (as sqrt does).
-  return log(x+sqrt(x*x-1.0));
-}
-
-inline double atanh(double x)
-{
-  // must be x>-1, x<1, if not return Nan (Not a Number)
-  if(!(x>-1.0 && x<1.0)) return sqrt(-1.0);
-
-  return log((1.0+x)/(1.0-x))/2.0;
-}
-#else
-using namespace std;
 #endif
 
 

pcb_calculator/transline/units.h

@@ -24,15 +24,41 @@
 #ifndef __UNITS_H
 #define __UNITS_H
 
+#include <config.h>
 #include <cmath>
 #include <units_scales.h>
 
-#ifdef __MINGW32__
-#define atanh(x) (0.5 * log((1.0 + (x)) / (1.0 - (x))))
-#define asinh(x) log((x) + sqrt((x) * (x) + 1.0))
-#define acosh(x) log((x) + sqrt((x) * (x) - 1.0))
+#ifndef HAVE_CMATH_ASINH
+inline double asinh( double x )
+{
+    if( x==0.0 ) return sqrt( -1.0 );
+
+    return log( x+sqrt(x*x+1) );
+}
+#endif
+
+#ifndef HAVE_CMATH_ACOSH
+inline double acosh( double x )
+{
+    // must be x>=1, if not return Nan (Not a Number)
+    if( !(x>=1.0) ) return sqrt( -1.0 );
+
+    // return only the positive result (as sqrt does).
+    return log( x+sqrt(x*x-1.0) );
+}
 #endif
 
+#ifndef HAVE_CMATH_ATANH
+inline double atanh( double x )
+{
+    // must be x>-1, x<1, if not return Nan (Not a Number)
+    if( !(x>-1.0 && x<1.0) ) return sqrt( -1.0 );
+
+    return log( (1.0+x)/(1.0-x) ) / 2.0;
+}
+#endif
+
+
 #ifndef M_PI
 #define M_PI           3.1415926535897932384626433832795029  /* pi */
 #endif

pcbnew/pcad2kicadpcb_plugin/pcb_pad.cpp

@@ -30,7 +30,6 @@
 #include <wx/wx.h>
 #include <wx/config.h>
 #include <trigo.h>
-#include <stdint.h>
 
 #include <pcb_pad.h>
 
@@ -155,7 +154,7 @@ void PCB_PAD::WriteToFile( wxFile* aFile, char aFileType, int aRotation )
     PCB_PAD_SHAPE*  padShape;
     wxString        padShapeName = wxT( "Ellipse" );
     wxString        s, padType;
-    uint32_t        layerMask;
+    wxUint32        layerMask;
     int             i;
     int             width = 0;
     int             height = 0;

pcbnew/printout_controler.cpp

@@ -321,8 +321,7 @@ void BOARD_PRINTOUT_CONTROLLER::DrawPage()
 
 #if defined(DEBUG)
     wxRect paperRect = GetPaperRectPixels();
-    wxLogTrace( tracePrinting, wxT( "Paper rectangle:                  left=%d, top=%d, "
-                                    "right=%d, bottom=%d" ),
+    wxLogTrace( tracePrinting, wxT( "Paper rectangle:                  left=%d, top=%d, right=%d, bottom=%d" ),
                 paperRect.GetLeft(), paperRect.GetTop(), paperRect.GetRight(),
                 paperRect.GetBottom() );
 
@@ -330,8 +329,7 @@ void BOARD_PRINTOUT_CONTROLLER::DrawPage()
     int devTop = dc->LogicalToDeviceY( drawRect.GetY() );
     int devRight = dc->LogicalToDeviceX( drawRect.GetRight() );
     int devBottom = dc->LogicalToDeviceY( drawRect.GetBottom() );
-    wxLogTrace( tracePrinting, wxT( "Final device rectangle:           left=%d, top=%d, "
-                                    "right=%d, bottom=%d\n" ),
+    wxLogTrace( tracePrinting, wxT( "Final device rectangle:           left=%d, top=%d, right=%d, bottom=%d\n" ),
                 devLeft, devTop, devRight, devBottom );
 #endif
 

pcbnew/scripting/pcbnew_footprint_wizards.cpp

@@ -95,8 +95,7 @@ wxArrayString PYTHON_FOOTPRINT_WIZARD::CallRetArrayStrMethod
          if ( !PyList_Check(result) )
          {
              Py_DECREF( result );
-             ret.Add( wxT("PYTHON_FOOTPRINT_WIZARD::CallRetArrayStrMethod, "
-                        "result is not a list"),1 );
+             ret.Add( wxT("PYTHON_FOOTPRINT_WIZARD::CallRetArrayStrMethod, result is not a list"), 1 );
              return ret;
          }
 

scripting/fixswigimports.py

-#!/usr/bin/env python2
+#!/usr/bin/env python
 
 # the purpose of this script is rewriting the swig_import_helper
 # call so it will not load _xxxxx.so/dso from inside a kicad executable