Commit 3c7df7b7 authored by stambaughw's avatar stambaughw

Complete comment translation of gerbview source.

parent 8b3ffe74
This diff is collapsed.
/********************************************************/
/* Routines generales de gestion des commandes usuelles */
/********************************************************/
/* fichier controle.cpp */
/*
* Routines d'affichage grille, Boite de coordonnees, Curseurs, marqueurs ...
*/
/****************/
/* controle.cpp */
/****************/
#include "fctsys.h"
#include "common.h"
......@@ -17,25 +11,13 @@
#include "protos.h"
/**********************************************************************/
BOARD_ITEM* WinEDA_GerberFrame::GerberGeneralLocateAndDisplay()
/**********************************************************************/
{
return Locate( CURSEUR_OFF_GRILLE );
}
/****************************************************************/
void WinEDA_GerberFrame::GeneralControle( wxDC* DC, wxPoint Mouse )
/****************************************************************/
/* traitement des touches de fonctions utilisees ds tous les menus
* Zoom
* Redessin d'ecran
* Cht Unites
* Cht couches
* Remise a 0 de l'origine des coordonnees relatives
*/
{
wxRealPoint delta;
wxPoint curpos, oldpos;
......@@ -68,25 +50,25 @@ void WinEDA_GerberFrame::GeneralControle( wxDC* DC, wxPoint Mouse )
switch( g_KeyPressed )
{
case WXK_NUMPAD8: /* Deplacement curseur vers le haut */
case WXK_NUMPAD8:
case WXK_UP:
Mouse.y -= wxRound(delta.y);
DrawPanel->MouseTo( Mouse );
break;
case WXK_NUMPAD2: /* Deplacement curseur vers le bas */
case WXK_NUMPAD2:
case WXK_DOWN:
Mouse.y += wxRound(delta.y);
DrawPanel->MouseTo( Mouse );
break;
case WXK_NUMPAD4: /* Deplacement curseur vers la gauche */
case WXK_NUMPAD4:
case WXK_LEFT:
Mouse.x -= wxRound(delta.x);
DrawPanel->MouseTo( Mouse );
break;
case WXK_NUMPAD6: /* Deplacement curseur vers la droite */
case WXK_NUMPAD6:
case WXK_RIGHT:
Mouse.x += wxRound(delta.x);
DrawPanel->MouseTo( Mouse );
......@@ -97,10 +79,8 @@ void WinEDA_GerberFrame::GeneralControle( wxDC* DC, wxPoint Mouse )
break;
}
/* Recalcul de la position du curseur schema */
GetScreen()->m_Curseur = curpos;
/* Placement sur la grille generale */
PutOnGrid( &GetScreen()->m_Curseur );
if( oldpos != GetScreen()->m_Curseur )
......@@ -129,5 +109,5 @@ void WinEDA_GerberFrame::GeneralControle( wxDC* DC, wxPoint Mouse )
}
SetToolbars();
UpdateStatusBar(); /* Affichage des coord curseur */
UpdateStatusBar();
}
This diff is collapsed.
/*********************************************/
/* Edition des pistes: Routines d'effacement */
/* Effacement de segment, piste, net et zone */
/* Edit Track: Erase Routines */
/* Drop the segment, track, and net area */
/*********************************************/
#include "fctsys.h"
......@@ -10,16 +10,10 @@
#include "gerbview.h"
#include "protos.h"
/* Routines externes : */
/* Routines Locales */
/* Variables locales */
/****************************************************************************************/
void WinEDA_GerberFrame::Delete_DCode_Items( wxDC* DC, int dcode_value, int layer_number )
/****************************************************************************************/
void WinEDA_GerberFrame::Delete_DCode_Items( wxDC* DC,
int dcode_value,
int layer_number )
{
if( dcode_value < FIRST_DCODE ) // No tool selected
return;
......@@ -42,28 +36,26 @@ void WinEDA_GerberFrame::Delete_DCode_Items( wxDC* DC, int dcode_value, int laye
}
/*****************************************************************/
TRACK* WinEDA_GerberFrame::Delete_Segment( wxDC* DC, TRACK* Track )
/*****************************************************************/
/* Supprime 1 segment de piste.
* 2 Cas possibles:
* Si On est en trace de nouvelle piste: Effacement du segment en
* cours de trace
* Sinon : Effacment du segment sous le curseur.
/* Removes 1 segment of track.
*
* If There is evidence of new track: erase segment
* Otherwise: Delete segment under the cursor.
*/
TRACK* WinEDA_GerberFrame::Delete_Segment( wxDC* DC, TRACK* Track )
{
if( Track == NULL )
return NULL;
if( Track->m_Flags & IS_NEW ) // Trace en cours, on peut effacer le dernier segment
if( Track->m_Flags & IS_NEW ) // Trace in progress, delete the last
// segment
{
if( g_CurrentTrackList.GetCount() > 0 )
{
// modification du trace
// Change track.
delete g_CurrentTrackList.PopBack();
if( g_CurrentTrackList.GetCount() && g_CurrentTrackSegment->Type() == TYPE_VIA )
if( g_CurrentTrackList.GetCount()
&& g_CurrentTrackSegment->Type() == TYPE_VIA )
{
delete g_CurrentTrackList.PopBack();
}
......@@ -85,12 +77,11 @@ TRACK* WinEDA_GerberFrame::Delete_Segment( wxDC* DC, TRACK* Track )
}
return NULL;
} // Fin traitement si trace en cours
}
Trace_Segment( DrawPanel, DC, Track, GR_XOR );
DLIST<TRACK>* container = (DLIST<TRACK>*) Track->GetList();
DLIST<TRACK>* container = (DLIST<TRACK>*)Track->GetList();
wxASSERT( container );
container->Remove( Track );
......
/******************************************************/
/* edit.cpp: fonctions generales de l'edition du PCB */
/******************************************************/
/***********************************/
/* edit.cpp: PCB editing functions */
/***********************************/
#include "fctsys.h"
#include "class_drawpanel.h"
......@@ -13,21 +13,17 @@
#include "protos.h"
/************************************************************************/
void WinEDA_GerberFrame::OnLeftClick( wxDC* DC, const wxPoint& MousePos )
/************************************************************************/
/* Traite les commandes declench�e par le bouton gauche de la souris,
* quand un outil est deja selectionn�
/* Process the command triggered by the left button of the mouse when a tool
* is already selected.
*/
void WinEDA_GerberFrame::OnLeftClick( wxDC* DC, const wxPoint& MousePos )
{
BOARD_ITEM* DrawStruct = GetScreen()->GetCurItem();
wxString msg;
if( m_ID_current_state == 0 )
{
if( DrawStruct && DrawStruct->m_Flags ) // Commande "POPUP" en cours
if( DrawStruct && DrawStruct->m_Flags )
{
msg.Printf( wxT( "WinEDA_GerberFrame::ProcessCommand err: Struct %d, m_Flags = %X" ),
(unsigned) DrawStruct->Type(),
......@@ -70,12 +66,9 @@ void WinEDA_GerberFrame::OnLeftClick( wxDC* DC, const wxPoint& MousePos )
}
/********************************************************************************/
void WinEDA_GerberFrame::Process_Special_Functions( wxCommandEvent& event )
/********************************************************************************/
/* Traite les selections d'outils et les commandes appelees du menu POPUP
/* Handles the selection of tools, menu, and popup menu commands.
*/
void WinEDA_GerberFrame::Process_Special_Functions( wxCommandEvent& event )
{
int id = event.GetId();
int layer = GetScreen()->m_Active_Layer;
......@@ -89,7 +82,7 @@ void WinEDA_GerberFrame::Process_Special_Functions( wxCommandEvent& event )
pos.y += 20;
switch( id ) // Arret eventuel de la commande de d�placement en cours
switch( id )
{
case wxID_CUT:
case wxID_COPY:
......@@ -108,7 +101,7 @@ void WinEDA_GerberFrame::Process_Special_Functions( wxCommandEvent& event )
{
DrawPanel->ForceCloseManageCurseur( DrawPanel, &dc );
}
/* ne devrait pas etre execute, sauf bug */
/* Should not be executed, except bug */
if( GetScreen()->m_BlockLocate.m_Command != BLOCK_IDLE )
{
GetScreen()->m_BlockLocate.m_Command = BLOCK_IDLE;
......@@ -121,7 +114,7 @@ void WinEDA_GerberFrame::Process_Special_Functions( wxCommandEvent& event )
SetCursor( DrawPanel->m_PanelCursor = DrawPanel->m_PanelDefaultCursor );
break;
default: // Arret dea commande de d�placement en cours
default:
if( DrawPanel->ManageCurseur
&& DrawPanel->ForceCloseManageCurseur )
{
......@@ -131,7 +124,7 @@ void WinEDA_GerberFrame::Process_Special_Functions( wxCommandEvent& event )
break;
}
switch( id ) // Traitement des commandes
switch( id )
{
case ID_EXIT:
Close( TRUE );
......@@ -147,10 +140,12 @@ void WinEDA_GerberFrame::Process_Special_Functions( wxCommandEvent& event )
break;
case ID_GET_TOOLS:
// InstallToolsFrame(this, wxPoint(-1,-1) );
break;
case ID_FIND_ITEMS:
// InstallFindFrame(this, pos);
break;
......@@ -249,7 +244,8 @@ void WinEDA_GerberFrame::Process_Special_Functions( wxCommandEvent& event )
case ID_GERBVIEW_POPUP_DELETE_DCODE_ITEMS:
if( gerber_layer )
Delete_DCode_Items( &dc, gerber_layer->m_Selected_Tool, ((PCB_SCREEN*)GetScreen())->m_Active_Layer );
Delete_DCode_Items( &dc, gerber_layer->m_Selected_Tool,
( (PCB_SCREEN*) GetScreen() )->m_Active_Layer );
break;
default:
......@@ -261,12 +257,9 @@ void WinEDA_GerberFrame::Process_Special_Functions( wxCommandEvent& event )
}
/**************************************************************************/
void WinEDA_GerberFrame::OnLeftDClick( wxDC* DC, const wxPoint& MousePos )
/**************************************************************************/
/* Called on a double click:
/* Called on a double click of left mouse button.
*/
void WinEDA_GerberFrame::OnLeftDClick( wxDC* DC, const wxPoint& MousePos )
{
EDA_BaseStruct* DrawStruct = GetScreen()->GetCurItem();
wxClientDC dc( DrawPanel );
......@@ -281,7 +274,7 @@ void WinEDA_GerberFrame::OnLeftDClick( wxDC* DC, const wxPoint& MousePos )
DrawStruct = GerberGeneralLocateAndDisplay();
}
break; // end case 0
break;
default:
break;
......
......@@ -15,19 +15,13 @@
#include "class_board_design_settings.h"
#include "protos.h"
/* Routines Locales : */
static int SavePcbFormatAscii( WinEDA_GerberFrame* frame,
FILE* File, int* LayerLookUpTable );
/* Variables Locales */
/************************************************************************/
void WinEDA_GerberFrame::ExportDataInPcbnewFormat( wxCommandEvent& event )
/************************************************************************/
/* Export data in pcbnew format
*/
void WinEDA_GerberFrame::ExportDataInPcbnewFormat( wxCommandEvent& event )
{
int ii = 0;
bool no_used_layers = true; // Changed to false if any used layer found
......@@ -42,7 +36,8 @@ void WinEDA_GerberFrame::ExportDataInPcbnewFormat( wxCommandEvent& event )
if( no_used_layers )
{
DisplayInfoMessage( this, _( "None of the Gerber layers contain any data" ) );
DisplayInfoMessage( this,
_( "None of the Gerber layers contain any data" ) );
return;
}
......@@ -54,10 +49,10 @@ void WinEDA_GerberFrame::ExportDataInPcbnewFormat( wxCommandEvent& event )
msg = wxT( "*" ) + PcbExt;
FullFileName = EDA_FileSelector( _( "Board file name:" ),
wxEmptyString, /* Chemin par defaut */
wxEmptyString, /* nom fichier par defaut */
PcbExt, /* extension par defaut */
msg, /* Masque d'affichage */
wxEmptyString,
wxEmptyString,
PcbExt,
msg,
this,
wxFD_SAVE,
FALSE
......@@ -87,9 +82,7 @@ void WinEDA_GerberFrame::ExportDataInPcbnewFormat( wxCommandEvent& event )
}
/***************************************************************/
static int WriteSetup( FILE* File, BOARD* Pcb )
/***************************************************************/
{
char text[1024];
......@@ -97,22 +90,21 @@ static int WriteSetup( FILE* File, BOARD* Pcb )
sprintf( text, "InternalUnit %f INCH\n", 1.0 / PCB_INTERNAL_UNIT );
fprintf( File, "%s", text );
Pcb->m_BoardSettings->SetCopperLayerCount( g_DesignSettings.GetCopperLayerCount( ) );
fprintf( File, "Layers %d\n", g_DesignSettings.GetCopperLayerCount( ) );
Pcb->m_BoardSettings->SetCopperLayerCount(
g_DesignSettings.GetCopperLayerCount() );
fprintf( File, "Layers %d\n", g_DesignSettings.GetCopperLayerCount() );
fprintf( File, "$EndSETUP\n\n" );
return 1;
}
/******************************************************/
static bool WriteGeneralDescrPcb( BOARD* Pcb, FILE* File )
/******************************************************/
{
int NbLayers;
/* Print the copper layer count */
NbLayers = Pcb->m_BoardSettings->GetCopperLayerCount( );
NbLayers = Pcb->m_BoardSettings->GetCopperLayerCount();
fprintf( File, "$GENERAL\n" );
fprintf( File, "LayerCount %d\n", NbLayers );
......@@ -128,17 +120,14 @@ static bool WriteGeneralDescrPcb( BOARD* Pcb, FILE* File )
}
/*******************************************************************/
static int SavePcbFormatAscii( WinEDA_GerberFrame* frame, FILE* aFile,
int* LayerLookUpTable )
/*******************************************************************/
/* Routine to save the board
* @param frame = pointer to the main frame
* @param File = FILE * pointer to an already opened file
* @param LayerLookUpTable = look up table: pcbnew layer for each gerber layer
* @return 1 if OK, 0 if fail
*/
static int SavePcbFormatAscii( WinEDA_GerberFrame* frame, FILE* aFile,
int* LayerLookUpTable )
{
char line[256];
TRACK* track;
......@@ -170,13 +159,15 @@ static int SavePcbFormatAscii( WinEDA_GerberFrame* frame, FILE* aFile,
{
double cx = track->m_Param;
double cy = track->GetSubNet();
double a = atan2( track->m_Start.y-cy, track->m_Start.x-cx );
double b = atan2( track->m_End.y-cy, track->m_End.x-cx );
double a = atan2( track->m_Start.y - cy,
track->m_Start.x - cx );
double b = atan2( track->m_End.y - cy, track->m_End.x - cx );
drawitem->m_Shape = S_ARC;
drawitem->m_Angle = (int)fmod( (a-b)/M_PI*1800.0+3600.0, 3600.0 );
drawitem->m_Start.x = (int)cx;
drawitem->m_Start.y = (int)cy;
drawitem->m_Angle = (int) fmod(
(a - b) / M_PI * 1800.0 + 3600.0, 3600.0 );
drawitem->m_Start.x = (int) cx;
drawitem->m_Start.y = (int) cy;
}
pcb->Add( drawitem );
......@@ -190,9 +181,10 @@ static int SavePcbFormatAscii( WinEDA_GerberFrame* frame, FILE* aFile,
|| track->m_Shape == S_SPOT_RECT
|| track->m_Shape == S_SPOT_OVALE )
{
newtrack = new SEGVIA( (const SEGVIA&) *track );
newtrack = new SEGVIA( (const SEGVIA &) * track );
// A spot is found, and can be a via: change it to via, and delete other
// A spot is found, and can be a via: change it to via, and
// delete other
// spots at same location
newtrack->m_Shape = VIA_THROUGH;
......@@ -200,10 +192,13 @@ static int SavePcbFormatAscii( WinEDA_GerberFrame* frame, FILE* aFile,
newtrack->SetDrillDefault();
// Compute the via position from track position ( Via position is the
// Compute the via position from track position ( Via position
// is the
// position of the middle of the track segment )
newtrack->m_Start.x = (newtrack->m_Start.x + newtrack->m_End.x) / 2;
newtrack->m_Start.y = (newtrack->m_Start.y + newtrack->m_End.y) / 2;
newtrack->m_Start.x =
(newtrack->m_Start.x + newtrack->m_End.x) / 2;
newtrack->m_Start.y =
(newtrack->m_Start.y + newtrack->m_End.y) / 2;
newtrack->m_End = newtrack->m_Start;
}
else // a true TRACK
......@@ -240,8 +235,9 @@ static int SavePcbFormatAscii( WinEDA_GerberFrame* frame, FILE* aFile,
}
}
// Switch the locale to standard C (needed to print floating point numbers like 1.3)
SetLocaleTo_C_standard( );
// Switch the locale to standard C (needed to print floating point numbers
// like 1.3)
SetLocaleTo_C_standard();
// write the PCB heading
fprintf( aFile, "PCBNEW-BOARD Version %d date %s\n\n", g_CurrentVersionPCB,
......@@ -255,7 +251,7 @@ static int SavePcbFormatAscii( WinEDA_GerberFrame* frame, FILE* aFile,
// the destructor should destroy all owned sub-objects
delete pcb;
SetLocaleTo_Default( ); // revert to the current locale
SetLocaleTo_Default(); // revert to the current locale
wxEndBusyCursor();
return 1;
}
/******************************************************/
/* Files.cp: Lecture / Sauvegarde des fichiers gerber */
/******************************************************/
/*************/
/* files.cpp */
/*************/
#include "fctsys.h"
#include "common.h"
......@@ -13,8 +13,9 @@
#include "protos.h"
/* Routines locales */
static void LoadDCodeFile( WinEDA_GerberFrame* frame, const wxString& FullFileName, wxDC* DC );
static void LoadDCodeFile( WinEDA_GerberFrame* frame,
const wxString& FullFileName,
wxDC* DC );
void WinEDA_GerberFrame::OnFileHistory( wxCommandEvent& event )
......@@ -33,13 +34,9 @@ void WinEDA_GerberFrame::OnFileHistory( wxCommandEvent& event )
}
}
/***************
***************************************/
void WinEDA_GerberFrame::Files_io( wxCommandEvent& event )
/********************************************************/
/* Gestion generale des commandes de lecture de fichiers
*/
/* File commands. */
void WinEDA_GerberFrame::Files_io( wxCommandEvent& event )
{
int id = event.GetId();
......@@ -106,19 +103,16 @@ void WinEDA_GerberFrame::Files_io( wxCommandEvent& event )
}
/*******************************************************************************************/
bool
WinEDA_GerberFrame::LoadOneGerberFile( const wxString& FullFileName,
wxDC* DC,
int mode )
/*******************************************************************************************/
/*
* Lecture d'un fichier PCB, le nom etant dans PcbNameBuffer.s
* retourne:
* 0 si fichier non lu ( annulation de commande ... )
* 1 si OK
* Load a PCB file.
*
* Returns:
* 0 if file not read (cancellation of order ...)
* 1 if OK
*/
bool WinEDA_GerberFrame::LoadOneGerberFile( const wxString& FullFileName,
wxDC* DC,
int mode )
{
wxString filetypes;
wxFileName filename = FullFileName;
......@@ -130,28 +124,28 @@ WinEDA_GerberFrame::LoadOneGerberFile( const wxString& FullFileName,
wxString current_path = filename.GetPath();
/* Standard gerber filetypes */
filetypes += _("Gerber files (.gbr .gbx .lgr .ger .pho)| \
*.gbr;*.GBR;*.gbx;*.GBX;*.lgr;*.LGR;*.ger;*.GER;*.pho;*.PHO|");
filetypes += _( "Gerber files (.gbr .gbx .lgr .ger .pho)| \
.gbr;*.GBR;*.gbx;*.GBX;*.lgr;*.LGR;*.ger;*.GER;*.pho;*.PHO|" );
/* Special gerber filetypes */
filetypes += _("Top layer (*.GTL)|*.GTL;*.gtl|");
filetypes += _("Bottom layer (*.GBL)|*.GBL;*.gbl|");
filetypes += _("Bottom solder resist (*.GBS)|*.GBS;*.gbs|");
filetypes += _("Top solder resist (*.GTS)|*.GTS;*.gts|");
filetypes += _("Bottom overlay (*.GBO)|*.GBO;*.gbo|");
filetypes += _("Top overlay (*.GTO)|*.GTO;*.gto|");
filetypes += _("Bottom paste (*.GBP)|*.GBP;*.gbp|");
filetypes += _("Top paste (*.GTP)|*.GTP;*.gtp|");
filetypes += _("Keep-out layer (*.GKO)|*.GKO;*.gko|");
filetypes += _("Mechanical layers (*.GMx)|*.GM1;*.gm1;*.GM2;*.gm2;*.GM3;*.gm3|");
filetypes += _("Top Pad Master (*.GPT)|*.GPT;*.gpt|");
filetypes += _("Bottom Pad Master (*.GPB)|*.GPB;*.gpb|");
filetypes += _( "Top layer (*.GTL)|*.GTL;*.gtl|" );
filetypes += _( "Bottom layer (*.GBL)|*.GBL;*.gbl|" );
filetypes += _( "Bottom solder resist (*.GBS)|*.GBS;*.gbs|" );
filetypes += _( "Top solder resist (*.GTS)|*.GTS;*.gts|" );
filetypes += _( "Bottom overlay (*.GBO)|*.GBO;*.gbo|" );
filetypes += _( "Top overlay (*.GTO)|*.GTO;*.gto|" );
filetypes += _( "Bottom paste (*.GBP)|*.GBP;*.gbp|" );
filetypes += _( "Top paste (*.GTP)|*.GTP;*.gtp|" );
filetypes += _( "Keep-out layer (*.GKO)|*.GKO;*.gko|" );
filetypes += _( "Mechanical layers (*.GMx)|*.GM1;*.gm1;*.GM2;*.gm2;*.GM3;*.gm3|" );
filetypes += _( "Top Pad Master (*.GPT)|*.GPT;*.gpt|" );
filetypes += _( "Bottom Pad Master (*.GPB)|*.GPB;*.gpb|" );
/* All filetypes */
filetypes += AllFilesWildcard;
/* Get current path if emtpy */
if ( current_path.IsEmpty() )
if( current_path.IsEmpty() )
current_path = wxGetCwd();
wxFileDialog dlg( this,
......@@ -182,16 +176,16 @@ WinEDA_GerberFrame::LoadOneGerberFile( const wxString& FullFileName,
}
/**********************************************************************************************/
static void LoadDCodeFile( WinEDA_GerberFrame* frame, const wxString& FullFileName, wxDC* DC )
/**********************************************************************************************/
/*
* Lecture d'un fichier PCB, le nom etant dans PcbNameBuffer.s
* retourne:
* 0 si fichier non lu ( annulation de commande ... )
* 1 si OK
* Read a PCB file.
*
* Returns:
* 0 if file not read (cancellation of order ...)
* 1 if OK
*/
static void LoadDCodeFile( WinEDA_GerberFrame* frame,
const wxString& FullFileName,
wxDC* DC )
{
wxString wildcard;
wxFileName fn = FullFileName;
......@@ -201,11 +195,12 @@ static void LoadDCodeFile( WinEDA_GerberFrame* frame, const wxString& FullFileNa
if( !fn.IsOk() )
{
wildcard.Printf( _( "Gerber DCODE files (%s)|*.%s" ),
GetChars( g_PenFilenameExt ), GetChars( g_PenFilenameExt ));
GetChars( g_PenFilenameExt ),
GetChars( g_PenFilenameExt ) );
wildcard += AllFilesWildcard;
fn = frame->GetScreen()->m_FileName;
fn.SetExt( g_PenFilenameExt );
wxFileDialog dlg( ( wxWindow* )frame, _( "Load GERBER DCODE File" ),
wxFileDialog dlg( (wxWindow*) frame, _( "Load GERBER DCODE File" ),
fn.GetPath(), fn.GetFullName(), wildcard,
wxFD_OPEN | wxFD_FILE_MUST_EXIST );
......@@ -221,12 +216,10 @@ static void LoadDCodeFile( WinEDA_GerberFrame* frame, const wxString& FullFileNa
}
/*******************************************************************************/
bool WinEDA_GerberFrame::SaveGerberFile( const wxString& FullFileName, wxDC* DC )
/*******************************************************************************/
/* Sauvegarde du fichier PCB en format ASCII
/* Save the file in ASCII PCB.
*/
bool WinEDA_GerberFrame::SaveGerberFile( const wxString& FullFileName,
wxDC* DC )
{
wxString wildcard;
wxFileName fn = FullFileName;
......@@ -236,7 +229,8 @@ bool WinEDA_GerberFrame::SaveGerberFile( const wxString& FullFileName, wxDC* DC
fn = GetScreen()->m_FileName;
wildcard.Printf( _( "Gerber DCODE files (%s)|*.%s" ),
GetChars( g_PenFilenameExt ), GetChars( g_PenFilenameExt ));
GetChars( g_PenFilenameExt ),
GetChars( g_PenFilenameExt ) );
wxFileDialog dlg( this, _( "Save Gerber File" ), fn.GetPath(),
fn.GetFullName(), wildcard,
......
/******************************************************************/
/* gerberframe.cpp - fonctions des classes du type WinEDA_GerberFrame */
/******************************************************************/
/*******************/
/* gerberframe.cpp */
/*******************/
#ifdef __GNUG__
#pragma implementation
......@@ -94,7 +94,6 @@ BEGIN_EVENT_TABLE( WinEDA_GerberFrame, WinEDA_BasePcbFrame )
EVT_KICAD_CHOICEBOX( ID_TOOLBARH_GERBER_SELECT_TOOL,
WinEDA_GerberFrame::Process_Special_Functions )
// Vertical toolbar:
EVT_TOOL( ID_NO_SELECT_BUTT, WinEDA_GerberFrame::Process_Special_Functions )
EVT_TOOL( ID_TRACK_BUTT, WinEDA_GerberFrame::Process_Special_Functions )
......@@ -102,7 +101,6 @@ BEGIN_EVENT_TABLE( WinEDA_GerberFrame, WinEDA_BasePcbFrame )
EVT_TOOL( ID_PCB_DELETE_ITEM_BUTT,
WinEDA_GerberFrame::Process_Special_Functions )
// Annulation de commande en cours
EVT_MENU_RANGE( ID_POPUP_GENERAL_START_RANGE, ID_POPUP_GENERAL_END_RANGE,
WinEDA_GerberFrame::Process_Special_Functions )
......@@ -116,11 +114,6 @@ BEGIN_EVENT_TABLE( WinEDA_GerberFrame, WinEDA_BasePcbFrame )
END_EVENT_TABLE()
/****************/
/* Constructeur */
/****************/
WinEDA_GerberFrame::WinEDA_GerberFrame( wxWindow* father,
const wxString& title,
const wxPoint& pos,
......@@ -131,7 +124,7 @@ WinEDA_GerberFrame::WinEDA_GerberFrame( wxWindow* father,
m_FrameName = wxT( "GerberFrame" );
m_Draw_Axis = true; // true to show X and Y axis on screen
m_Draw_Sheet_Ref = FALSE; // TRUE pour avoir le cartouche dessin�
m_Draw_Sheet_Ref = FALSE; // TRUE for reference drawings.
if( DrawPanel )
DrawPanel->m_Block_Enable = TRUE;
......@@ -146,6 +139,7 @@ WinEDA_GerberFrame::WinEDA_GerberFrame( wxWindow* father,
ActiveScreen = ScreenPcb;
LoadSettings();
SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y );
GetScreen()->SetGrid( ID_POPUP_GRID_LEVEL_1000 + m_LastGridSizeId );
......@@ -153,36 +147,37 @@ WinEDA_GerberFrame::WinEDA_GerberFrame( wxWindow* father,
ReCreateHToolbar();
ReCreateVToolbar();
ReCreateOptToolbar();
#if defined(KICAD_AUIMANAGER)
m_auimgr.SetManagedWindow(this);
m_auimgr.SetManagedWindow( this );
wxAuiPaneInfo horiz;
horiz.Gripper(false);
horiz.DockFixed(true);
horiz.Movable(false);
horiz.Floatable(false);
horiz.CloseButton(false);
horiz.CaptionVisible(false);
horiz.Gripper( false );
horiz.DockFixed( true );
horiz.Movable( false );
horiz.Floatable( false );
horiz.CloseButton( false );
horiz.CaptionVisible( false );
wxAuiPaneInfo vert(horiz);
wxAuiPaneInfo vert( horiz );
vert.TopDockable(false).BottomDockable(false);
horiz.LeftDockable(false).RightDockable(false);
vert.TopDockable( false ).BottomDockable( false );
horiz.LeftDockable( false ).RightDockable( false );
m_auimgr.AddPane(m_HToolBar,
wxAuiPaneInfo(horiz).Name(wxT("m_HToolBar")).Top().Row(0));
m_auimgr.AddPane( m_HToolBar,
wxAuiPaneInfo( horiz ).Name( wxT( "m_HToolBar" ) ).Top().Row( 0 ) );
m_auimgr.AddPane(m_VToolBar,
wxAuiPaneInfo(vert).Name(wxT("m_VToolBar")).Right());
m_auimgr.AddPane( m_VToolBar,
wxAuiPaneInfo( vert ).Name( wxT( "m_VToolBar" ) ).Right() );
m_auimgr.AddPane(m_OptionsToolBar,
wxAuiPaneInfo(vert).Name(wxT("m_OptionsToolBar")).Left());
m_auimgr.AddPane( m_OptionsToolBar,
wxAuiPaneInfo( vert ).Name( wxT( "m_OptionsToolBar" ) ).Left() );
m_auimgr.AddPane(DrawPanel,
wxAuiPaneInfo().Name(wxT("DrawFrame")).CentrePane());
m_auimgr.AddPane( DrawPanel,
wxAuiPaneInfo().Name( wxT( "DrawFrame" ) ).CentrePane() );
m_auimgr.AddPane(MsgPanel,
wxAuiPaneInfo(horiz).Name(wxT("MsgPanel")).Bottom());
m_auimgr.AddPane( MsgPanel,
wxAuiPaneInfo( horiz ).Name( wxT( "MsgPanel" ) ).Bottom() );
m_auimgr.Update();
#endif
......@@ -194,13 +189,10 @@ WinEDA_GerberFrame::~WinEDA_GerberFrame()
SetBaseScreen( ScreenPcb );
extern PARAM_CFG_BASE* ParamCfgList[];
wxGetApp().SaveCurrentSetupValues( ParamCfgList );
}
/***********************************************************/
void WinEDA_GerberFrame::OnCloseWindow( wxCloseEvent& Event )
/***********************************************************/
{
PCB_SCREEN* screen = ScreenPcb;
......@@ -221,7 +213,8 @@ void WinEDA_GerberFrame::OnCloseWindow( wxCloseEvent& Event )
}
}
#endif
while( screen ) // suppression flag modify pour eviter d'autres message
while( screen ) // Modify delete flag to prevent further message.
{
screen->ClrModify();
screen = screen->Next();
......@@ -234,13 +227,10 @@ void WinEDA_GerberFrame::OnCloseWindow( wxCloseEvent& Event )
}
/*******************************************/
void WinEDA_GerberFrame::SetToolbars()
/*******************************************/
/** Function SetToolbars()
* Set the tools state for the toolbars, accordint to display options
* Set the tools state for the toolbars, according to display options
*/
void WinEDA_GerberFrame::SetToolbars()
{
int layer = ( (PCB_SCREEN*) GetScreen() )->m_Active_Layer;
GERBER* gerber = g_GERBER_List[layer];
......@@ -318,16 +308,15 @@ void WinEDA_GerberFrame::SetToolbars()
}
DisplayUnitsMsg();
#if defined(KICAD_AUIMANAGER)
if(m_auimgr.GetManagedWindow())
if( m_auimgr.GetManagedWindow() )
m_auimgr.Update();
#endif
}
/*************************************/
int WinEDA_GerberFrame::BestZoom()
/*************************************/
{
double x, y;
wxSize size;
......@@ -340,5 +329,5 @@ int WinEDA_GerberFrame::BestZoom()
GetScreen()->GetGridSize().y ) / (double) size.y;
GetScreen()->m_Curseur = GetBoard()->m_BoundaryBox.Centre();
return wxRound( MAX( x, y ) * (double)GetScreen()->m_ZoomScalar );
return wxRound( MAX( x, y ) * (double) GetScreen()->m_ZoomScalar );
}
......@@ -26,7 +26,7 @@ wxString g_PenFilenameExt;
int g_DCodesColor;
int g_Default_GERBER_Format;
int g_Plot_Spot_Mini; /* Diametre mini de l'ouverture pour */
int g_Plot_Spot_Mini; /* Diameter of the opening mini-track for GERBER. */
int g_DisplayPolygonsModeSketch;
GERBER* g_GERBER_List[32];
......@@ -47,9 +47,10 @@ bool WinEDA_App::OnInit()
ActiveScreen = ScreenPcb;
// read current setup and reopen last directory if no filename to open in command line
// read current setup and reopen last directory if no filename to open in
// command line
bool reopenLastUsedDirectory = argc == 1;
GetSettings(reopenLastUsedDirectory);
GetSettings( reopenLastUsedDirectory );
extern PARAM_CFG_BASE* ParamCfgList[];
wxGetApp().ReadCurrentSetupValues( ParamCfgList );
......@@ -62,9 +63,10 @@ bool WinEDA_App::OnInit()
g_DrawBgColor = BLACK;
Read_Hotkey_Config( frame, false ); /* Must be called before creating the main frame
* in order to display the real hotkeys
* in menus or tool tips */
Read_Hotkey_Config( frame, false ); /* Must be called before creating the
* main frame in order to display the
* real hotkeys in menus or tool tips
*/
frame = new WinEDA_GerberFrame( NULL, wxT( "GerbView" ),
wxPoint( 0, 0 ),
......@@ -75,8 +77,10 @@ bool WinEDA_App::OnInit()
frame->SetBoard( new BOARD( NULL, frame ) );
// Initialize some display options
DisplayOpt.DisplayPadIsol = false; // Pad clearance has no meaning here
DisplayOpt.ShowTrackClearanceMode = 0; // tracks and vias clearance has no meaning here
DisplayOpt.DisplayPadIsol = false; // Pad clearance has no meaning
// here
DisplayOpt.ShowTrackClearanceMode = 0; // tracks and vias clearance has no
// meaning here
SetTopWindow( frame ); // Set GerbView mainframe on top
frame->Show( TRUE ); // Show GerbView mainframe
......
This diff is collapsed.
......@@ -2,8 +2,6 @@
/** gerbview_config.cpp : Gerbview configuration*/
/************************************************/
/* Functions to handle Gerbview configuration */
#include "fctsys.h"
#include "appl_wxstruct.h"
#include "common.h"
......@@ -27,9 +25,7 @@ const wxString GerbviewProjectFileExt( wxT( "cnf" ) );
const wxString GerbviewProjectFileWildcard( _( "GerbView project files (.cnf)|*.cnf" ) );
/*************************************************************/
void WinEDA_GerberFrame::Process_Config( wxCommandEvent& event )
/*************************************************************/
{
int id = event.GetId();
wxPoint pos;
......@@ -45,7 +41,7 @@ void WinEDA_GerberFrame::Process_Config( wxCommandEvent& event )
DisplayColorSetupFrame( this, pos );
break;
case ID_CONFIG_REQ: // Creation de la fenetre de configuration
case ID_CONFIG_REQ:
{
InstallConfigFrame( pos );
break;
......@@ -91,7 +87,7 @@ void WinEDA_GerberFrame::Process_Config( wxCommandEvent& event )
HandleHotkeyConfigMenuSelection( this, id );
break;
case ID_PREFERENCES_HOTKEY_SHOW_CURRENT_LIST: // Display Current hotkey list for gerbview
case ID_PREFERENCES_HOTKEY_SHOW_CURRENT_LIST:
DisplayHotkeyList( this, s_Gerbview_Hokeys_Descr );
break;
......@@ -102,22 +98,16 @@ void WinEDA_GerberFrame::Process_Config( wxCommandEvent& event )
}
/*****************************************************/
bool Read_Config()
/*****************************************************/
/* lit la configuration, si elle n'a pas deja etee lue
* 1 - lit gerbview.cnf
* 2 - si non trouve lit <chemin de gerbview.exe>/gerbview.cnf
* 3 - si non trouve: init des variables aux valeurs par defaut
*
* Retourne un pointeur su le message d'erreur a afficher
/* Read configuration, if it has not already read.
* 1 - bed gerbview.cnf
* 2 - if no bed is path> gerbview.exe> / gerbview.cnf
* 3 - If not found: init variables to default values
*/
bool Read_Config()
{
wxGetApp().ReadProjectConfig( wxT( "gerbview.cnf" ), GROUP, ParamCfgList,
FALSE );
/* Inits autres variables */
if( g_PhotoFilenameExt.IsEmpty() )
g_PhotoFilenameExt = wxT( "pho" );
if( g_DrillFilenameExt.IsEmpty() )
......@@ -129,13 +119,7 @@ bool Read_Config()
}
/******************************************/
void WinEDA_GerberFrame::Update_config()
/******************************************/
/*
* creation du fichier de config
*/
{
wxFileName fn = wxFileName( wxEmptyString, wxT( "gerbview" ),
GerbviewProjectFileExt );
......@@ -147,21 +131,17 @@ void WinEDA_GerberFrame::Update_config()
if( dlg.ShowModal() == wxID_CANCEL )
return;
/* ecriture de la configuration */
wxGetApp().WriteProjectConfig( dlg.GetPath(), GROUP, ParamCfgList );
}
/***************************************************************/
bool Read_Hotkey_Config( WinEDA_DrawFrame* frame, bool verbose )
/***************************************************************/
/*
* Read the hotkey files config for pcbnew and module_edit
*/
bool Read_Hotkey_Config( WinEDA_DrawFrame* frame, bool verbose )
{
wxString FullFileName = ReturnHotkeyConfigFilePath(
g_ConfigFileLocationChoice );
wxString FullFileName =
ReturnHotkeyConfigFilePath( g_ConfigFileLocationChoice );
FullFileName += HOTKEY_FILENAME;
FullFileName += wxT(".");
......
This diff is collapsed.
/**********************************************/
/* GERBVIEW : Routines d'initialisation globale */
/******* Fichier INITPCB.C ********************/
/**********************************************/
/****************************************/
/******* initpcb.cpp ********************/
/****************************************/
#include "fctsys.h"
......@@ -12,16 +11,8 @@
#include "gerbview.h"
#include "protos.h"
/* Routines Locales */
/********************************************************/
bool WinEDA_GerberFrame::Clear_Pcb( bool query )
/********************************************************/
/* Realise les init des pointeurs et variables
* Si Item == NULL, il n'y aura pas de confirmation
*/
{
int layer;
......@@ -30,9 +21,10 @@ bool WinEDA_GerberFrame::Clear_Pcb( bool query )
if( query )
{
if( GetBoard()->m_Drawings || GetBoard()->m_Track || GetBoard()->m_Zone )
if( GetBoard()->m_Drawings || GetBoard()->m_Track
|| GetBoard()->m_Zone )
{
if( !IsOK( this, _( "Current Data will be lost ?" ) ) )
if( !IsOK( this, _( "Current data will be lost?" ) ) )
return FALSE;
}
}
......@@ -43,21 +35,18 @@ bool WinEDA_GerberFrame::Clear_Pcb( bool query )
GetBoard()->m_Zone.DeleteAll();
/* init pointeurs et variables */
for( layer = 0; layer < 32; layer++ )
{
if( g_GERBER_List[layer] )
g_GERBER_List[layer]->InitToolTable();
}
/* remise a 0 ou a une valeur initiale des variables de la structure */
GetBoard()->m_BoundaryBox.SetOrigin( 0, 0 );
GetBoard()->m_BoundaryBox.SetSize( 0, 0 );
GetBoard()->m_Status_Pcb = 0;
GetBoard()->m_NbNodes = 0;
GetBoard()->m_NbNoconnect = 0;
/* Init parametres de gestion des ecrans PAD et PCB */
SetBaseScreen( ActiveScreen = ScreenPcb );
GetScreen()->Init();
......@@ -65,11 +54,9 @@ bool WinEDA_GerberFrame::Clear_Pcb( bool query )
}
/*********************************************************/
void WinEDA_GerberFrame::Erase_Zones( bool query )
/*********************************************************/
{
if( query && !IsOK( this, _( "Delete zones ?" ) ) )
if( query && !IsOK( this, _( "Delete zones?" ) ) )
return;
GetBoard()->m_Zone.DeleteAll();
......@@ -78,9 +65,7 @@ void WinEDA_GerberFrame::Erase_Zones( bool query )
}
/************************************************************************/
void WinEDA_GerberFrame::Erase_Segments_Pcb( bool all_layers, bool query )
/************************************************************************/
{
int layer = GetScreen()->m_Active_Layer;
......@@ -103,7 +88,7 @@ void WinEDA_GerberFrame::Erase_Segments_Pcb( bool all_layers, bool query )
break;
default:
DisplayError( this, wxT( "Type Draw inconnu/inattendu" ) );
DisplayError( this, wxT( "Draw type unknown." ) );
break;
}
}
......@@ -112,24 +97,23 @@ void WinEDA_GerberFrame::Erase_Segments_Pcb( bool all_layers, bool query )
}
/******************************************************************/
void WinEDA_GerberFrame::Erase_Pistes( int masque_type, bool query )
/******************************************************************/
/* Efface les segments de piste, selon les autorisations affichees
* masque_type = masque des options de selection:
/* Delete track segments.
* masque_type mask options selection:
* SEGM_FIXE, SEGM_AR
* Si un des bits est a 1, il n'y a pas effacement du segment de meme bit a 1
* If a bit is 1, segment is not erased.
*/
void WinEDA_GerberFrame::Erase_Pistes( int masque_type, bool query )
{
TRACK* pt_segm;
BOARD_ITEM* PtNext;
if( query && !IsOK( this, _( "Delete Tracks?" ) ) )
if( query && !IsOK( this, _( "Delete tracks?" ) ) )
return;
/* Marquage des pistes a effacer */
for( pt_segm = GetBoard()->m_Track; pt_segm != NULL; pt_segm = (TRACK*) PtNext )
/* Mark tracks to clear. */
for( pt_segm = GetBoard()->m_Track;
pt_segm != NULL;
pt_segm = (TRACK*) PtNext )
{
PtNext = pt_segm->Next();
if( pt_segm->GetState( SEGM_FIXE | SEGM_AR ) & masque_type )
......@@ -141,14 +125,12 @@ void WinEDA_GerberFrame::Erase_Pistes( int masque_type, bool query )
}
/*****************************************************************/
void WinEDA_GerberFrame::Erase_Textes_Pcb( bool query )
/*****************************************************************/
{
BOARD_ITEM* PtStruct;
BOARD_ITEM* PtNext;
if( query && !IsOK( this, _( "Delete Pcb Texts" ) ) )
if( query && !IsOK( this, _( "Delete pcb text?" ) ) )
return;
PtStruct = GetBoard()->m_Drawings;
......@@ -163,20 +145,20 @@ void WinEDA_GerberFrame::Erase_Textes_Pcb( bool query )
}
/*********************************************************/
void WinEDA_GerberFrame::Erase_Current_Layer( bool query )
/*********************************************************/
{
int layer = GetScreen()->m_Active_Layer;
wxString msg;
msg.Printf( _( "Delete Layer %d" ), layer + 1 );
msg.Printf( _( "Delete layer %d?" ), layer + 1 );
if( query && !IsOK( this, msg ) )
return;
/* Delete tracks (spots and lines) */
TRACK* PtNext;
for( TRACK* pt_segm = GetBoard()->m_Track; pt_segm != NULL; pt_segm = (TRACK*) PtNext )
for( TRACK* pt_segm = GetBoard()->m_Track;
pt_segm != NULL;
pt_segm = (TRACK*) PtNext )
{
PtNext = pt_segm->Next();
if( pt_segm->GetLayer() != layer )
......@@ -193,6 +175,7 @@ void WinEDA_GerberFrame::Erase_Current_Layer( bool query )
continue;
zone->DeleteStructure();
}
ScreenPcb->SetModify();
ScreenPcb->SetRefreshReq();
}
/**********************************************/
/* Routine de selection de couches pour trace */
/**********************************************/
/****************/
/* lay2plot.cpp */
/****************/
#include "fctsys.h"
#include "common.h"
......@@ -10,14 +10,8 @@
#include "protos.h"
/* Variables locales : */
/* Routines Locales */
/*******************************************************************************/
/* Routine to plot the pcb, by selected layers. */
void Print_PcbItems(BOARD * Pcb, wxDC *DC, int drawmode, int printmasklayer)
/*******************************************************************************/
/* routine de trace du pcb, avec selection des couches */
{
DISPLAY_OPTIONS save_opt;
TRACK * pt_piste;
......@@ -33,7 +27,6 @@ void Print_PcbItems(BOARD * Pcb, wxDC *DC, int drawmode, int printmasklayer)
DisplayOpt.DisplayDrawItems = FILLED;
DisplayOpt.DisplayZonesMode = 0;
/* trace des pistes */
pt_piste = Pcb->m_Track;
for( ; pt_piste != NULL ; pt_piste = pt_piste->Next() )
{
......@@ -43,6 +36,3 @@ void Print_PcbItems(BOARD * Pcb, wxDC *DC, int drawmode, int printmasklayer)
DisplayOpt = save_opt;
}
This diff is collapsed.
/******************************************************/
/* edit.cpp: fonctions generales de l'edition du PCB */
/******************************************************/
/********************/
/* onrightclick.cpp */
/********************/
#include "fctsys.h"
#include "common.h"
......@@ -11,27 +11,28 @@
#include "pcbplot.h"
#include "protos.h"
/********************************************************************************/
bool WinEDA_GerberFrame::OnRightClick( const wxPoint& MousePos, wxMenu* PopMenu )
/********************************************************************************/
/* Prepare the right-click pullup menu.
* The menu already has a list of zoom commands.
*/
bool WinEDA_GerberFrame::OnRightClick( const wxPoint& MousePos,
wxMenu* PopMenu )
{
BOARD_ITEM* DrawStruct = GetScreen()->GetCurItem();
wxString msg;
bool BlockActive = (GetScreen()->m_BlockLocate.m_Command != BLOCK_IDLE);
bool BlockActive =
(GetScreen()->m_BlockLocate.m_Command != BLOCK_IDLE);
DrawPanel->m_CanStartBlock = -1; // Ne pas engager un debut de bloc sur validation menu
// Do not initiate a start block validation on menu.
DrawPanel->m_CanStartBlock = -1;
// Simple localisation des elements si possible
if( (DrawStruct == NULL) || (DrawStruct->m_Flags == 0) )
// Simple location of elements where possible.
if( ( DrawStruct == NULL ) || ( DrawStruct->m_Flags == 0 ) )
{
DrawStruct = GerberGeneralLocateAndDisplay();
}
// Si commande en cours: affichage fin de commande
// If command in progress, end command.
if( m_ID_current_state )
{
if( DrawStruct && DrawStruct->m_Flags )
......@@ -46,16 +47,21 @@ bool WinEDA_GerberFrame::OnRightClick( const wxPoint& MousePos, wxMenu* PopMenu
{
if( BlockActive )
{
PopMenu->Append( ID_POPUP_CANCEL_CURRENT_COMMAND, _( "Cancel Block" ) );
PopMenu->Append( ID_POPUP_ZOOM_BLOCK, _( "Zoom Block (drag middle mouse)" ) );
PopMenu->Append( ID_POPUP_CANCEL_CURRENT_COMMAND,
_( "Cancel Block" ) );
PopMenu->Append( ID_POPUP_ZOOM_BLOCK,
_( "Zoom Block (drag middle mouse)" ) );
PopMenu->AppendSeparator();
PopMenu->Append( ID_POPUP_PLACE_BLOCK, _( "Place Block" ) );
PopMenu->Append( ID_POPUP_COPY_BLOCK, _( "Copy Block (shift mouse)" ) );
PopMenu->Append( ID_POPUP_DELETE_BLOCK, _( "Delete Block (ctrl + drag mouse)" ) );
PopMenu->Append( ID_POPUP_COPY_BLOCK,
_( "Copy Block (shift mouse)" ) );
PopMenu->Append( ID_POPUP_DELETE_BLOCK,
_( "Delete Block (ctrl + drag mouse)" ) );
PopMenu->Append( ID_POPUP_MIRROR_X_BLOCK, _( "Mirror Block" ) );
}
else
PopMenu->Append( ID_POPUP_CANCEL_CURRENT_COMMAND, _( "Cancel" ) );
PopMenu->Append( ID_POPUP_CANCEL_CURRENT_COMMAND,
_( "Cancel" ) );
PopMenu->AppendSeparator();
}
}
......@@ -63,7 +69,8 @@ bool WinEDA_GerberFrame::OnRightClick( const wxPoint& MousePos, wxMenu* PopMenu
if( BlockActive )
return true;
PopMenu->Append( ID_GERBVIEW_POPUP_DELETE_DCODE_ITEMS, _( "Delete Dcode items" ) );
PopMenu->Append( ID_GERBVIEW_POPUP_DELETE_DCODE_ITEMS,
_( "Delete Dcode items" ) );
if( DrawStruct == NULL )
return true;
......@@ -81,8 +88,7 @@ bool WinEDA_GerberFrame::OnRightClick( const wxPoint& MousePos, wxMenu* PopMenu
default:
msg.Printf(
wxT( "WinEDA_GerberFrame::OnRightClick Error: illegal or unknown DrawType %d" ),
msg.Printf( wxT( "WinEDA_GerberFrame::OnRightClick Error: illegal or unknown DrawType %d" ),
DrawStruct->Type() );
DisplayError( this, msg );
break;
......
/********************************************/
/* GERBVIEW - Gestion des Options et Reglages */
/********************************************/
/************************/
/* File options.cpp */
/************************/
/*
* Set the display options for Gerbview
......@@ -21,13 +19,10 @@
#include <wx/spinctrl.h>
/*****************************************************************/
void WinEDA_GerberFrame::OnSelectOptionToolbar( wxCommandEvent& event )
/*****************************************************************/
/** Function OnSelectOptionToolbar
* called to validate current choices
*/
void WinEDA_GerberFrame::OnSelectOptionToolbar( wxCommandEvent& event )
{
int id = event.GetId();
......@@ -120,9 +115,7 @@ void WinEDA_GerberFrame::OnSelectOptionToolbar( wxCommandEvent& event )
}
/******************************************************/
class WinEDA_GerberGeneralOptionsFrame : public wxDialog
/******************************************************/
{
private:
......@@ -132,7 +125,6 @@ private:
wxRadioBox* m_CursorShape;
wxRadioBox* m_GerberDefaultScale;
// Constructor and destructor
public:
WinEDA_GerberGeneralOptionsFrame( WinEDA_BasePcbFrame* parent,
const wxPoint& pos );
......@@ -145,25 +137,19 @@ private:
DECLARE_EVENT_TABLE()
};
/* Events table for WinEDA_GerberGeneralOptionsFrame */
BEGIN_EVENT_TABLE( WinEDA_GerberGeneralOptionsFrame, wxDialog )
EVT_BUTTON( wxID_OK, WinEDA_GerberGeneralOptionsFrame::OnOkClick )
EVT_BUTTON( wxID_CANCEL, WinEDA_GerberGeneralOptionsFrame::OnCancelClick )
END_EVENT_TABLE()
/**********************************************************************************************/
WinEDA_GerberGeneralOptionsFrame::WinEDA_GerberGeneralOptionsFrame(
WinEDA_BasePcbFrame* parent,
const
wxPoint& framepos ) :
const wxPoint& framepos ) :
wxDialog( parent, -1, _( "Gerbview Options" ),
framepos, wxSize( 300, 240 ),
wxDEFAULT_DIALOG_STYLE | wxFRAME_FLOAT_ON_PARENT )
/**********************************************************************************************/
/** WinEDA_GerberGeneralOptionsFrame Constructor
*/
{
m_Parent = parent;
......@@ -228,18 +214,14 @@ WinEDA_GerberGeneralOptionsFrame::WinEDA_GerberGeneralOptionsFrame(
}
/************************************************************************/
void WinEDA_GerberGeneralOptionsFrame::OnCancelClick(
wxCommandEvent& WXUNUSED(event) )
/************************************************************************/
{
EndModal( -1 );
}
/*****************************************************************************/
void WinEDA_GerberGeneralOptionsFrame::OnOkClick( wxCommandEvent& event )
/*****************************************************************************/
{
DisplayOpt.DisplayPolarCood =
(m_PolarDisplay->GetSelection() == 0) ? FALSE : TRUE;
......@@ -253,7 +235,7 @@ void WinEDA_GerberGeneralOptionsFrame::OnOkClick( wxCommandEvent& event )
/*******************************************/
/* Dialog frame to select deisplay options */
/* Dialog frame to select display options */
/*******************************************/
class WinEDA_LookFrame : public wxDialog
{
......@@ -268,7 +250,6 @@ private:
public:
// Constructor and destructor
WinEDA_LookFrame( WinEDA_BasePcbFrame* parent, const wxPoint& pos );
~WinEDA_LookFrame() {};
......@@ -279,20 +260,17 @@ private:
DECLARE_EVENT_TABLE()
};
/* Construction de la table des evenements pour WinEDA_LookFrame */
BEGIN_EVENT_TABLE( WinEDA_LookFrame, wxDialog )
EVT_BUTTON( wxID_OK, WinEDA_LookFrame::OnOkClick )
EVT_BUTTON( wxID_CANCEL, WinEDA_LookFrame::OnCancelClick )
END_EVENT_TABLE()
/*******************************************************************************/
WinEDA_LookFrame::WinEDA_LookFrame( WinEDA_BasePcbFrame* parent,
const wxPoint& framepos ) :
wxDialog( parent, -1, _( "Gerbview Draw Options" ), framepos,
wxSize( 350, 200 ),
wxDEFAULT_DIALOG_STYLE | wxFRAME_FLOAT_ON_PARENT )
/*******************************************************************************/
{
m_Parent = parent;
......@@ -362,20 +340,13 @@ WinEDA_LookFrame::WinEDA_LookFrame( WinEDA_BasePcbFrame* parent,
}
/**************************************************************/
void WinEDA_LookFrame::OnCancelClick( wxCommandEvent& WXUNUSED(event) )
/**************************************************************/
{
EndModal( -1 );
}
/*************************************************************/
void WinEDA_LookFrame::OnOkClick( wxCommandEvent& event )
/*************************************************************/
/* Met a jour les options
*/
{
if( m_OptDisplayLines->GetSelection() == 1 )
DisplayOpt.DisplayPcbTrackFill = TRUE;
......@@ -412,9 +383,7 @@ void WinEDA_LookFrame::OnOkClick( wxCommandEvent& event )
}
/***************************************************************************/
void WinEDA_GerberFrame::InstallGerberOptionsFrame( const wxPoint& pos, int id )
/***************************************************************************/
{
switch( id )
{
......
/************************************************/
/* Menu General de Trace (PLOT) fichier PLOT.CC */
/************************************************/
/***************/
/* pcbplot.cpp */
/***************/
#include "fctsys.h"
#include "common.h"
......@@ -15,13 +15,9 @@
PCB_Plot_Options g_pcb_plot_options;
/* variables locale : */
/* Routines Locales */
/**************************************************************/
/* void WinEDA_BasePcbFrame::ToPlotter(wxCommandEvent& event) */
/***************************************************************/
/**************************************************************/
/* void WinEDA_BasePcbFrame::ToPlotter(wxCommandEvent& event) */
/***************************************************************/
void WinEDA_BasePcbFrame::ToPlotter(wxCommandEvent& event)
{
......
......@@ -13,11 +13,13 @@
#define OPTKEY_PRINT_SCALE wxT( "PrintScale" )
/* Plot Options : */
struct PCB_Plot_Options {
struct PCB_Plot_Options
{
bool Exclude_Edges_Pcb;
int PlotLine_Width;
bool Plot_Frame_Ref; // True to plot/print frame references
bool DrawViaOnMaskLayer; // True if vias are drawn on Mask layer (ie protected by mask)
bool DrawViaOnMaskLayer; // True if vias are drawn on Mask layer
// (ie protected by mask)
int Plot_Mode;
bool Plot_Set_MIROIR;
bool Sel_Rotate_Window;
......@@ -25,18 +27,18 @@ struct PCB_Plot_Options {
int HPGL_Pen_Speed;
int HPGL_Pen_Diam;
int HPGL_Pen_Recouvrement;
bool HPGL_Org_Centre; // TRUE si en HPGL, l'origine le centre de la feuille
bool HPGL_Org_Centre; // TRUE if, HPGL originally the center of the node
int PlotPSColorOpt; // True for color Postscript output
bool Plot_PS_Negative; // True to create a negative board ps plot
/* Autorisation de trace des divers items en serigraphie */
/* Settings to trace the various items in silkscreen. */
bool Sel_Texte_Reference;
bool Sel_Texte_Valeur;
bool Sel_Texte_Divers;
bool Sel_Texte_Invisible;
bool PlotPadsOnSilkLayer;
bool Plot_Pads_All_Layers; /* Plot pads meme n'appartenant pas a la
couche ( utile pour serigraphie) */
/* Plot pads even outside the layer (useful for silkscreen) */
bool Plot_Pads_All_Layers;
/* id for plot format (see enum PlotFormat in plot_common.h) */
int PlotFormat;
......@@ -49,4 +51,3 @@ struct PCB_Plot_Options {
extern PCB_Plot_Options g_pcb_plot_options;
#endif // ifndef PCBPLOT_H
/********************************************************/
/**** Routine de lecture et visu d'un fichier GERBER ****/
/********************************************************/
/**********************/
/**** readgerb.cpp ****/
/**********************/
#include "fctsys.h"
#include "common.h"
......@@ -11,112 +11,104 @@
#include "pcbplot.h"
#include "protos.h"
/* Format Gerber : NOTES :
* Fonctions preparatoires:
/* Format Gerber: NOTES:
* Functions history:
* Gn =
* G01 interpolation lineaire ( trace de droites )
* G02,G20,G21 Interpolation circulaire , sens trigo < 0
* G03,G30,G31 Interpolation circulaire , sens trigo > 0
* G04 commentaire
* G06 Interpolation parabolique
* G07 Interpolation cubique
* G10 interpolation lineaire ( echelle 10x )
* G11 interpolation lineaire ( echelle 0.1x )
* G12 interpolation lineaire ( echelle 0.01x )
* G52 plot symbole reference par Dnn code
* G53 plot symbole reference par Dnn ; symbole tourne de -90 degres
* G54 Selection d'outil
* G55 Mode exposition photo
* G56 plot symbole reference par Dnn A code
* G57 affiche le symbole reference sur la console
* G58 plot et affiche le symbole reference sur la console
* G60 interpolation lineaire ( echelle 100x )
* G70 Unites = Inches
* G71 Unites = Millimetres
* G74 supprime interpolation circulaire sur 360 degre, revient a G01
* G75 Active interpolation circulaire sur 360 degre
* G90 Mode Coordonnees absolues
* G91 Mode Coordonnees Relatives
* G01 linear interpolation (right trace)
* G02, G20, G21 Circular interpolation, meaning trig <0
* G03, G30, G31 Circular interpolation, meaning trigo> 0
* G04 review
* G06 parabolic interpolation
* G07 Cubic Interpolation
* G10 linear interpolation (scale x10)
* G11 linear interpolation (0.1x range)
* G12 linear interpolation (0.01x scale)
* G52 plot symbol reference code by Dnn
* G53 plot symbol reference by Dnn; symbol rotates from -90 degrees
* G54 Selection Tool
* G55 Fashion photo exhibition
* G56 plot symbol reference code for DNN
* G57 displays the symbol link to the console
* G58 plot displays the symbol and link to the console
* G60 linear interpolation (scale x100)
* G70 Units = Inches
* G71 Units = Millimeters
* G74 circular interpolation removes 360 degree, has returned G01
* G75 Active circular interpolation on 360 degree
* G90 mode absolute coordinates
* G91 Fashion Related Contacts
*
* Coordonnees X,Y
* X,Y sont suivies de + ou - et de m+n chiffres (non separes)
* m = partie entiere
* n = partie apres la virgule
* formats classiques : m = 2, n = 3 (format 2.3)
* m = 3, n = 4 (format 3.4)
* ex:
* G__ X00345Y-06123 D__*
* X, Y coordinates
* X and Y are followed by + or - and m + n digits (not separated)
* m = integer part
* n = part after the comma
* Classic formats: m = 2, n = 3 (size 2.3)
* m = 3, n = 4 (size 3.4)
* eg
* G__ X00345Y-06123 * D__
*
* Outils et D_CODES
* numero d'outil ( identification des formes )
* 1 a 99 (classique)
* 1 a 999
* Tools and D_CODES
* Tool number (identification of shapes)
* 1 to 99 (Classical)
* 1 to 999
* D_CODES:
*
* D01 ... D9 = codes d'action:
* D01 = activation de lumiere (baisser de plume) lors du d�placement
* D02 = extinction de lumiere (lever de plume) lors du d�placement
* D01 ... D9 = action codes:
* D01 = activating light (lower pen) when placement
* D02 = light extinction (lift pen) when placement
* D03 = Flash
* D09 = VAPE Flash
* D51 = precede par G54 -> Select VAPE
* D51 = G54 preceded by -> Select VAPE
*
* D10 ... D255 = Indentification d'outils ( d'ouvertures )
* Ne sont pas tj dans l'ordre ( voir tableau dans PCBPLOT.H)
* D10 ... D255 = Identification Tool (Opening)
* Not in order (see table in PCBPLOT.H)
*/
/* Variables locales : */
/* Routines Locales */
/* Routine de Lecture d'un fichier de D Codes.
* Accepte format standard ou ALSPCB
* un ';' demarre un commentaire.
/* Routine to Read a file D Codes.
* Accepts standard format or ALSPCB
* A ';' starts a comment.
*
* Format Standard:
* tool, Horiz, Vert, drill, vitesse, acc. ,Type ; [DCODE (commentaire)]
* ex: 1, 12, 12, 0, 0, 0, 3 ; D10
* Standard Format:
* Tool, Horiz, Vert, drill, speed, acc. Type; [dCode (comment)]
* Ex: 1, 12, 12, 0, 0, 0, 3; D10
*
* Format ALSPCB:
* Ver , Hor , Type , Tool [,Drill]
* ex: 0.012, 0.012, L , D10
* Format: ALSPCB
* Ver, Hor, Type, Tool, [Drill]
* Eg 0012, 0012, L, D10
*
* Classe les caract en buf_tmp sous forme de tableau de structures D_CODE.
* Retourne:
* < 0 si erreur:
* -1 = Fichier non trouve
* -2 = Erreur lecture fichier
* Rang de D_code maxi lu ( nbr de dcodes )
* Rank the characters in buf_tmp tabular structures D_CODE.
* Returns:
* <0 if error:
* -1 = File not found
* -2 = Error reading file
* Rank D_code max lu (nbr of dCode)
*
* Internal Representation:
*
* Representation interne:
*
* Les lignes sont repr�sent�es par des TRACKS standards
* Les Flash sont repr�sent�es par des DRAWSEGMENTS
* - ronds ou ovales: DRAWSEGMENTS
* - rectangles: DRAWSEGMENTS
* la reference aux D-CODES est plac�e dans le membre GetNet()
* Lines are represented as standard TRACKS
* The flash is represented as DRAWSEGMENTS
* - Round or oval: DRAWSEGMENTS
* - Rectangles DRAWSEGMENTS
* Reference to the D-CODE is set in the member Getnet()
*/
/********************************************************/
bool WinEDA_GerberFrame::Read_GERBER_File( wxDC* DC,
const wxString& GERBER_FullFileName,
const wxString& D_Code_FullFileName )
/********************************************************/
/* Read a gerber file (RS274D or RS274X format).
* Normal format:
/* Read a gerber file (RS274D gold RS274X format).
* Normal size:
* Imperial
* Absolute
* end of block = *
* End of block = *
* CrLf after each command
* G codes repetes
* G codes BROKE
*/
bool WinEDA_GerberFrame::Read_GERBER_File( wxDC* DC,
const wxString& GERBER_FullFileName,
const wxString& D_Code_FullFileName )
{
int G_commande = 0,
D_commande = 0; /* command number for G et D commands (like G04 or D02) */
D_commande = 0; /* command number for G or D commands
* (like G04 or D02) */
char line[GERBER_BUFZ];
......@@ -155,11 +147,11 @@ bool WinEDA_GerberFrame::Read_GERBER_File( wxDC* DC,
wxSetWorkingDirectory( path );
wxBusyCursor show_wait;
SetLocaleTo_C_standard( );
SetLocaleTo_C_standard();
while( TRUE )
{
if( fgets( line, sizeof(line), gerber->m_Current_File ) == NULL ) // E.O.F
if( fgets( line, sizeof(line), gerber->m_Current_File ) == NULL )
{
if( gerber->m_FilesPtr == 0 )
break;
......@@ -185,7 +177,7 @@ bool WinEDA_GerberFrame::Read_GERBER_File( wxDC* DC,
text++;
break;
case '*': // End commande
case '*': // End command
gerber->m_CommandState = END_BLOCK;
text++;
break;
......@@ -202,7 +194,8 @@ bool WinEDA_GerberFrame::Read_GERBER_File( wxDC* DC,
gerber->Execute_G_Command( text, G_commande );
break;
case 'D': /* Line type Dxx : Tool selection (xx > 0) or command if xx = 0..9*/
case 'D': /* Line type Dxx : Tool selection (xx > 0) or
* command if xx = 0..9 */
D_commande = gerber->ReturnDCodeNumber( text );
gerber->Execute_DCODE_Command( this, DC, text, D_commande );
break;
......@@ -256,10 +249,11 @@ bool WinEDA_GerberFrame::Read_GERBER_File( wxDC* DC,
}
fclose( gerber->m_Current_File );
SetLocaleTo_Default( );
SetLocaleTo_Default();
/* Init DCodes list and perhaps read a DCODES file,
* if the gerber file is only a RS274D file (without any aperture information)
* if the gerber file is only a RS274D file (without any aperture
* information)
*/
if( !gerber->m_Has_DCode )
{
......@@ -272,7 +266,8 @@ bool WinEDA_GerberFrame::Read_GERBER_File( wxDC* DC,
fn = GERBER_FullFileName;
fn.SetExt( g_PenFilenameExt );
wildcard.Printf( _( "Gerber DCODE files (%s)|*.%s" ),
GetChars( g_PenFilenameExt ), GetChars( g_PenFilenameExt ));
GetChars( g_PenFilenameExt ),
GetChars( g_PenFilenameExt ) );
wildcard += AllFilesWildcard;
wxFileDialog dlg( this, _( "Load GERBER DCODE File" ),
......
/**********************************************/
/* GERBVIEW - Gestion des Options et Reglages */
/**********************************************/
/* Fichier reglage.cpp */
/***************/
/* reglage.cpp */
/***************/
/*
* Options for file extensions
......@@ -16,13 +14,12 @@
#include "pcbplot.h"
#include "protos.h"
/***********/
enum {
enum
{
ID_SAVE_CFG = 1000
};
/* Routines Locales */
class WinEDA_ConfigFrame : public wxDialog
{
......@@ -36,7 +33,6 @@ private:
WinEDA_EnterText* TextPhotoExt;
WinEDA_EnterText* TextPenExt;
// Constructor and destructor
public:
WinEDA_ConfigFrame( WinEDA_GerberFrame* parent, const wxPoint& pos );
~WinEDA_ConfigFrame() { };
......@@ -48,7 +44,8 @@ private:
DECLARE_EVENT_TABLE()
};
/* Construction de la table des evenements pour WinEDA_ConfigFrame */
BEGIN_EVENT_TABLE( WinEDA_ConfigFrame, wxDialog )
EVT_BUTTON( ID_SAVE_CFG, WinEDA_ConfigFrame::SaveCfg )
EVT_BUTTON( wxID_OK, WinEDA_ConfigFrame::OnOkClick )
......@@ -56,14 +53,11 @@ BEGIN_EVENT_TABLE( WinEDA_ConfigFrame, wxDialog )
END_EVENT_TABLE()
/*****************************************************************/
void WinEDA_GerberFrame::InstallConfigFrame( const wxPoint& pos )
/*****************************************************************/
/** Function InstallConfigFrame
* install the dialog box to configure some gerbview options
* manly the default file extensions
* mainly the default file extensions
*/
void WinEDA_GerberFrame::InstallConfigFrame( const wxPoint& pos )
{
WinEDA_ConfigFrame* CfgFrame = new WinEDA_ConfigFrame( this, pos );
......@@ -72,12 +66,10 @@ void WinEDA_GerberFrame::InstallConfigFrame( const wxPoint& pos )
}
/************************************************************/
WinEDA_ConfigFrame::WinEDA_ConfigFrame( WinEDA_GerberFrame* parent,
const wxPoint& framepos ) :
wxDialog( parent, -1, wxEmptyString, framepos, wxSize( 300, 180 ),
wxDEFAULT_DIALOG_STYLE | wxFRAME_FLOAT_ON_PARENT )
/************************************************************/
{
const int LEN_EXT = 100;
wxString title;
......@@ -132,9 +124,7 @@ WinEDA_ConfigFrame::WinEDA_ConfigFrame( WinEDA_GerberFrame* parent,
}
/******************************************************************/
void WinEDA_ConfigFrame::OnOkClick( wxCommandEvent& WXUNUSED (event) )
/******************************************************************/
{
g_DrillFilenameExt = TextDrillExt->GetValue();
g_PhotoFilenameExt = TextPhotoExt->GetValue();
......@@ -144,17 +134,13 @@ void WinEDA_ConfigFrame::OnOkClick( wxCommandEvent& WXUNUSED (event) )
}
/******************************************************************/
void WinEDA_ConfigFrame::OnCancelClick( wxCommandEvent& WXUNUSED (event) )
/******************************************************************/
{
EndModal( -1 );
}
/******************************************************/
void WinEDA_ConfigFrame::SaveCfg( wxCommandEvent& event )
/******************************************************/
{
m_Parent->Update_config();
}
This diff is collapsed.
/********************************************************/
/* Routine de lecture d'un fichier GERBER format RS274X */
/********************************************************/
/**************/
/* rs274x.cpp */
/**************/
#include "fctsys.h"
#include "common.h"
......@@ -41,9 +41,6 @@ enum RS274X_PARAMETERS {
};
/* Local Functions */
/**
* Function ReadXCommand
* reads in two bytes of data and assembles them into an int with the first
......@@ -109,11 +106,9 @@ static double ReadDouble( char*& text )
}
/****************************************************************************/
bool GERBER::ReadRS274XCommand( WinEDA_GerberFrame* frame, wxDC* DC,
char buff[GERBER_BUFZ], char*& text )
{
/****************************************************************************/
bool ok = true;
int code_command;
......@@ -165,12 +160,10 @@ exit:
}
/*******************************************************************************/
bool GERBER::ExecuteRS274XCommand( int command,
char buff[GERBER_BUFZ],
char*& text )
{
/*******************************************************************************/
int code;
int xy_seq_len, xy_seq_char;
bool ok = TRUE;
......@@ -216,7 +209,8 @@ bool GERBER::ExecuteRS274XCommand( int command,
text++;
break;
case 'N': // Sequence code (followed by the number of digits for the X,Y command
case 'N': // Sequence code (followed by the number of digits
// for the X,Y command
text++;
xy_seq_char = *text++;
if( (xy_seq_char >= '0') && (xy_seq_char <= '9') )
......@@ -224,14 +218,16 @@ bool GERBER::ExecuteRS274XCommand( int command,
break;
case 'X':
case 'Y': // Valeurs transmises :2 (really xy_seq_len : FIX ME) digits
case 'Y': // Values transmitted :2 (really xy_seq_len : FIX
// ME) digits
{
code = *(text++);
char ctmp = *(text++) - '0';
if( code == 'X' )
{
m_FmtScale.x = *text - '0'; // = nb chiffres apres la virgule
m_FmtLen.x = ctmp + m_FmtScale.x; // = nb total de chiffres
// number of digits after the decimal point
m_FmtScale.x = *text - '0';
m_FmtLen.x = ctmp + m_FmtScale.x;
}
else
{
......@@ -275,13 +271,13 @@ bool GERBER::ExecuteRS274XCommand( int command,
{
switch( *text )
{
case 'A': // A axis offset in current unit (inch ou mm)
case 'A': // A axis offset in current unit (inch or mm)
text++;
fcoord = ReadDouble( text );
m_Offset.x = wxRound( fcoord * conv_scale );
break;
case 'B': // B axis offset in current unit (inch ou mm)
case 'B': // B axis offset in current unit (inch or mm)
text++;
fcoord = ReadDouble( text );
m_Offset.y = wxRound( fcoord * conv_scale );
......@@ -348,7 +344,7 @@ bool GERBER::ExecuteRS274XCommand( int command,
if( m_Current_File == 0 )
{
wxString msg;
msg.Printf( wxT( "fichier <%s> non trouve" ), line );
msg.Printf( wxT( "file <%s> not found." ), line );
DisplayError( NULL, msg, 10 );
ok = FALSE;
m_Current_File = m_FilesList[m_FilesPtr];
......@@ -514,10 +510,8 @@ bool GERBER::ExecuteRS274XCommand( int command,
}
/*****************************************************************/
bool GetEndOfBlock( char buff[GERBER_BUFZ], char*& text, FILE* gerber_file )
{
/*****************************************************************/
for( ; ; )
{
while( (text < buff + GERBER_BUFZ) && *text )
......@@ -541,12 +535,10 @@ bool GetEndOfBlock( char buff[GERBER_BUFZ], char*& text, FILE* gerber_file )
}
/*******************************************************************/
bool GERBER::ReadApertureMacro( char buff[GERBER_BUFZ],
char*& text,
FILE* gerber_file )
{
/*******************************************************************/
APERTURE_MACRO am;
// read macro name
......@@ -648,7 +640,8 @@ bool GERBER::ReadApertureMacro( char buff[GERBER_BUFZ],
param.SetValue( ReadDouble( text ) );
}
if( i < paramCount ) // maybe some day we can throw an exception and track a line number
if( i < paramCount ) // maybe some day we can throw an exception and
// track a line number
printf( "i=%d, insufficient parameters\n", i );
// there are more parameters to read if this is an AMP_OUTLINE
......
......@@ -13,7 +13,6 @@
#include "wx/statline.h"
/* Variables locales */
#define LAYER_UNSELECTED NB_LAYERS
static int ButtonTable[32]; // Indexes buttons to Gerber layers
......@@ -27,10 +26,6 @@ enum swap_layer_id {
};
/***********************************************/
/* classe pour la frame de selection de layers */
/***********************************************/
class WinEDA_SwapLayerFrame : public wxDialog
{
private:
......@@ -46,7 +41,6 @@ private:
public:
// Constructor and destructor
WinEDA_SwapLayerFrame( WinEDA_GerberFrame* parent );
~WinEDA_SwapLayerFrame() {};
......@@ -58,7 +52,7 @@ private:
DECLARE_EVENT_TABLE()
};
/* Table des evenements pour WinEDA_SwapLayerFrame */
BEGIN_EVENT_TABLE( WinEDA_SwapLayerFrame, wxDialog )
EVT_COMMAND_RANGE( ID_BUTTON_0, ID_BUTTON_0 + 31,
wxEVT_COMMAND_BUTTON_CLICKED,
......@@ -68,13 +62,12 @@ BEGIN_EVENT_TABLE( WinEDA_SwapLayerFrame, wxDialog )
END_EVENT_TABLE()
/*************************************************************/
int* InstallDialogLayerPairChoice( WinEDA_GerberFrame * parent ) {
/*************************************************************/
/* Install a dialog frame to choose the equivalence
* between gerber layers and pcbnew layers
* return the "lookup table" if ok, or NULL
*/
int* InstallDialogLayerPairChoice( WinEDA_GerberFrame * parent )
{
WinEDA_SwapLayerFrame* frame = new WinEDA_SwapLayerFrame( parent );
int ii = frame->ShowModal();
......@@ -87,12 +80,10 @@ int* InstallDialogLayerPairChoice( WinEDA_GerberFrame * parent ) {
}
/*************************************************************************/
WinEDA_SwapLayerFrame::WinEDA_SwapLayerFrame( WinEDA_GerberFrame* parent ) :
wxDialog( parent, -1, _( "Layer selection:" ), wxPoint( -1, -1 ),
wxDefaultSize, wxDEFAULT_DIALOG_STYLE | MAYBE_RESIZE_BORDER )
{
/*************************************************************************/
OuterBoxSizer = NULL;
MainBoxSizer = NULL;
FlexColumnBoxSizer = NULL;
......@@ -184,7 +175,7 @@ WinEDA_SwapLayerFrame::WinEDA_SwapLayerFrame( WinEDA_GerberFrame* parent ) :
// of those items are placed into the left hand column, middle
// column, and right hand column (respectively) of the Flexgrid
// sizer, and the color of the second text string is set to
// fushia or blue (to respectively indicate whether the Gerber
// fuchsia or blue (to respectively indicate whether the Gerber
// layer has been mapped to a pcbnew layer or is not being
// exported at all). (Experimentation has shown that if a text
// control is used to depict which pcbnew layer that each Gerber
......@@ -249,7 +240,7 @@ WinEDA_SwapLayerFrame::WinEDA_SwapLayerFrame( WinEDA_GerberFrame* parent ) :
// Provide another text string to specify which pcbnew layer that this
// Gerber layer is initially mapped to, and set the initial text to
// specify the appropriate pcbnew layer, and set the foreground color
// of the text to fushia (to indicate that the layer is being exported).
// of the text to fuchsia (to indicate that the layer is being exported).
item_ID = ID_TEXT_0 + ii;
// When the first of these text strings is being added, determine what
......@@ -367,7 +358,7 @@ void WinEDA_SwapLayerFrame::OnSelectLayer( wxCommandEvent& event )
{
layer_list[ii]->SetLabel( ReturnPcbLayerName( jj ) );
// Change the text color to fushia (to highlight
// Change the text color to fuchsia (to highlight
// that this layer *is* being exported)
layer_list[ii]->SetForegroundColour( wxColour( 255, 0, 128 ) );
}
......@@ -375,18 +366,14 @@ void WinEDA_SwapLayerFrame::OnSelectLayer( wxCommandEvent& event )
}
/*********************************************************/
void WinEDA_SwapLayerFrame::OnCancelClick( wxCommandEvent& event )
/*********************************************************/
{
EndModal( -1 );
}
/*********************************************************/
void WinEDA_SwapLayerFrame::OnOkClick( wxCommandEvent& event )
{
/*********************************************************/
int ii;
bool AsCmpLayer = false;
......
......@@ -12,12 +12,8 @@
#include "bitmaps.h"
#include "hotkeys.h"
/***********************************************/
void WinEDA_GerberFrame::ReCreateMenuBar( void )
/***********************************************/
/* Cree ou reinitialise le menu du haut d'ecran
*/
void WinEDA_GerberFrame::ReCreateMenuBar( void )
{
wxMenuBar *menuBar = GetMenuBar();
......@@ -34,7 +30,7 @@ void WinEDA_GerberFrame::ReCreateMenuBar( void )
FALSE );
filesMenu->Append( ID_APPEND_FILE, _( "Load Gerber File" ),
_( "Load new Gerber file on currrent layer" ),
_( "Load new Gerber file on current layer" ),
FALSE );
filesMenu->Append( ID_MENU_INC_LAYER_AND_APPEND_FILE,
......@@ -79,15 +75,16 @@ void WinEDA_GerberFrame::ReCreateMenuBar( void )
// Configuration:
wxMenu* configmenu = new wxMenu;
ADD_MENUITEM_WITH_HELP( configmenu, ID_CONFIG_REQ, _( "&File Ext" ),
_( "Setting Files extension" ), config_xpm );
_( "Set files extensions" ), config_xpm );
ADD_MENUITEM_WITH_HELP( configmenu, ID_COLORS_SETUP, _( "&Colors" ),
_( "Select Colors and Display for layers" ),
_( "Select colors and display for layers" ),
palette_xpm );
ADD_MENUITEM_WITH_HELP( configmenu, ID_OPTIONS_SETUP, _( "&Options" ),
_( " Select general options" ), preference_xpm );
_( "Select general options" ), preference_xpm );
ADD_MENUITEM_WITH_HELP( configmenu, ID_PCB_DISPLAY_OPTIONS_SETUP, _( "Display" ),
_( " Select how items are displayed" ),
ADD_MENUITEM_WITH_HELP( configmenu, ID_PCB_DISPLAY_OPTIONS_SETUP,
_( "Display" ),
_( "Select how items are displayed" ),
display_options_xpm );
wxGetApp().AddMenuLanguageList( configmenu );
......@@ -100,14 +97,11 @@ void WinEDA_GerberFrame::ReCreateMenuBar( void )
configmenu->AppendSeparator();
AddHotkeyConfigMenu( configmenu );
// Menu drill ( generation fichiers percage)
/* wxMenu *drill_menu = new wxMenu;
* postprocess_menu->Append(ID_PCB_GEN_DRILL_FILE, "Create &Drill file",
* "Gen Drill (EXCELLON] file and/or Drill sheet");
*/
// Menu d'outils divers
wxMenu* miscellaneous_menu = new wxMenu;
ADD_MENUITEM_WITH_HELP( miscellaneous_menu, ID_GERBVIEW_SHOW_LIST_DCODES,
_( "&List DCodes" ),
......@@ -141,9 +135,7 @@ void WinEDA_GerberFrame::ReCreateMenuBar( void )
}
/***********************************************/
void WinEDA_GerberFrame::ReCreateHToolbar( void )
/***********************************************/
{
int layer = 0;
GERBER* gerber = NULL;
......@@ -161,13 +153,15 @@ void WinEDA_GerberFrame::ReCreateHToolbar( void )
}
m_HToolBar = new WinEDA_Toolbar( TOOLBAR_MAIN, this, ID_H_TOOLBAR, TRUE );
#if !defined(KICAD_AUIMANAGER)
SetToolBar( (wxToolBar*)m_HToolBar );
#endif
// Set up toolbar
m_HToolBar->AddTool( ID_NEW_BOARD, wxEmptyString,
wxBitmap( new_xpm ),
_( "New World" ) );
_( "New world" ) );
m_HToolBar->AddTool( ID_LOAD_FILE, wxEmptyString,
wxBitmap( open_xpm ),
......@@ -208,7 +202,7 @@ void WinEDA_GerberFrame::ReCreateHToolbar( void )
m_HToolBar->AddSeparator();
m_HToolBar->AddTool( ID_GEN_PRINT, wxEmptyString,
wxBitmap( print_button ),
_( "Print World" ) );
_( "Print world" ) );
m_HToolBar->AddSeparator();
msg = AddHotkeyName( _( "Zoom in" ), s_Gerbview_Hokeys_Descr, HK_ZOOM_IN );
......@@ -227,7 +221,8 @@ void WinEDA_GerberFrame::ReCreateHToolbar( void )
wxBitmap( zoom_redraw_xpm ),
msg );
msg = AddHotkeyName( _( "Zoom auto" ), s_Gerbview_Hokeys_Descr, HK_ZOOM_AUTO );
msg = AddHotkeyName( _( "Zoom auto" ), s_Gerbview_Hokeys_Descr,
HK_ZOOM_AUTO );
m_HToolBar->AddTool( ID_ZOOM_PAGE, wxEmptyString,
wxBitmap( zoom_auto_xpm ),
msg );
......@@ -256,6 +251,7 @@ void WinEDA_GerberFrame::ReCreateHToolbar( void )
m_HToolBar->AddSeparator();
choices.Clear();
choices.Add( _( "No tool" ) );
for( ii = 0; ii < MAX_TOOLS; ii++ )
{
wxString msg;
......@@ -277,12 +273,10 @@ void WinEDA_GerberFrame::ReCreateHToolbar( void )
}
/**********************************************/
void WinEDA_GerberFrame::ReCreateVToolbar( void )
/**********************************************/
/**
create or update the right vertical toolbar
*/
* Create or update the right vertical toolbar
*/
void WinEDA_GerberFrame::ReCreateVToolbar( void )
{
if( m_VToolBar )
return;
......@@ -298,11 +292,11 @@ create or update the right vertical toolbar
m_VToolBar->AddSeparator();
m_VToolBar->AddTool( ID_COMPONENT_BUTT, wxEmptyString,
wxBitmap( component_button ),
_( "Add Flashes" ) );
_( "Add flashes" ) );
m_VToolBar->AddTool( ID_BUS_BUTT, wxEmptyString,
wxBitmap( bus_button ),
_( "Add Lines" ) );
_( "Add lines" ) );
m_VToolBar->AddTool( ID_JUNCTION_BUTT, wxEmptyString,
wxBitmap( junction_xpm ),
......@@ -311,7 +305,7 @@ create or update the right vertical toolbar
m_VToolBar->AddSeparator();
m_VToolBar->AddTool( ID_PCB_ADD_TEXT_BUTT, wxEmptyString,
wxBitmap( tool_text_xpm ),
_( "Add Text" ) );
_( "Add text" ) );
#endif
m_VToolBar->AddSeparator();
......@@ -324,52 +318,51 @@ create or update the right vertical toolbar
}
/************************************************/
void WinEDA_GerberFrame::ReCreateOptToolbar( void )
/************************************************/
/**
create or update the left vertical toolbar (option toolbar
*/
* Create or update the left vertical toolbar (option toolbar
*/
void WinEDA_GerberFrame::ReCreateOptToolbar( void )
{
if( m_OptionsToolBar )
return;
// creation du tool bar options
// creation of tool bar options
m_OptionsToolBar = new WinEDA_Toolbar( TOOLBAR_OPTION, this,
ID_OPT_TOOLBAR, FALSE );
m_OptionsToolBar->AddTool( ID_TB_OPTIONS_SHOW_GRID, wxEmptyString,
wxBitmap( grid_xpm ),
_( "Display Grid OFF" ), wxITEM_CHECK );
_( "Turn grid off" ), wxITEM_CHECK );
m_OptionsToolBar->AddTool( ID_TB_OPTIONS_SHOW_POLAR_COORD, wxEmptyString,
wxBitmap( polar_coord_xpm ),
_( "Display Polar Coord ON" ), wxITEM_CHECK );
_( "Turn polar coordinate on" ), wxITEM_CHECK );
m_OptionsToolBar->AddTool( ID_TB_OPTIONS_SELECT_UNIT_INCH, wxEmptyString,
wxBitmap( unit_inch_xpm ),
_( "Units in inches" ), wxITEM_CHECK );
_( "Set units to inches" ), wxITEM_CHECK );
m_OptionsToolBar->AddTool( ID_TB_OPTIONS_SELECT_UNIT_MM, wxEmptyString,
wxBitmap( unit_mm_xpm ),
_( "Units in millimeters" ), wxITEM_CHECK );
_( "Set units to millimeters" ), wxITEM_CHECK );
m_OptionsToolBar->AddTool( ID_TB_OPTIONS_SELECT_CURSOR, wxEmptyString,
wxBitmap( cursor_shape_xpm ),
_( "Change Cursor Shape" ), wxITEM_CHECK );
_( "Change cursor shape" ), wxITEM_CHECK );
m_OptionsToolBar->AddSeparator();
m_OptionsToolBar->AddTool( ID_TB_OPTIONS_SHOW_PADS_SKETCH, wxEmptyString,
wxBitmap( pad_sketch_xpm ),
_( "Show Spots in Sketch Mode" ), wxITEM_CHECK );
_( "Show spots in sketch mode" ), wxITEM_CHECK );
m_OptionsToolBar->AddTool( ID_TB_OPTIONS_SHOW_TRACKS_SKETCH, wxEmptyString,
wxBitmap( showtrack_xpm ),
_( "Show Lines in Sketch Mode" ), wxITEM_CHECK );
_( "Show lines in sketch mode" ), wxITEM_CHECK );
m_OptionsToolBar->AddTool( ID_TB_OPTIONS_SHOW_POLYGONS_SKETCH, wxEmptyString,
wxBitmap( opt_show_polygon_xpm ),
_( "Show Polygons in Sketch Mode" ), wxITEM_CHECK );
_( "Show polygons in sketch mode" ),
wxITEM_CHECK );
m_OptionsToolBar->AddTool( ID_TB_OPTIONS_SHOW_DCODES, wxEmptyString,
wxBitmap( show_dcodenumber_xpm ),
......
This diff is collapsed.
......@@ -58,7 +58,7 @@ public:
void OnLeftClick( wxDC* DC, const wxPoint& MousePos );
void OnLeftDClick( wxDC* DC, const wxPoint& MousePos );
bool OnRightClick( const wxPoint& MousePos, wxMenu* PopMenu );
int BestZoom(); // Retourne le meilleur zoom
int BestZoom();
void OnSelectOptionToolbar( wxCommandEvent& event );
void OnHotKey( wxDC* DC, int hotkey, EDA_BaseStruct* DrawStruct );
......@@ -176,7 +176,6 @@ public:
void CopyDCodesSizeToItems();
void Liste_D_Codes( wxDC* DC );
/* Fonctions specifiques */
void Trace_Gerber( wxDC* DC, int draw_mode, int printmasklayer );
// Copper texts
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment