Commit 3bb1764d authored by dickelbeck's avatar dickelbeck

delete track uses dirty rect

parent 920ea810
......@@ -8,7 +8,7 @@ email address.
2008-Mar-10 UPDATE Dick Hollenbeck <dick@softplc.com>
================================================================================
+pcbnew
* Improved some comments on new functions.
* Improved some comments on new functions dirty area functions
* Changed
void ConvertPcbUnitsToPixelsUnits( EDA_Rect& aRect ); to
void ConvertPcbUnitsToPixelsUnits( EDA_Rect* aRect );
......@@ -21,6 +21,9 @@ email address.
* Changed from "new wxDCClip()" to use an automatic wxDCClip() variable in
drawpanel.cpp
* Removed a printf() from "release" build of drawpanel.cpp
* Added WinEDA_DrawPanel::PostDirtyRect()
* Renamed Supprime_Une_Piste() to Remove_One_Track() and it now uses
PostDirtyRect().
2008-Mar-10 UPDATE Jean-Pierre Charras <jean-pierre.charras@inpg.fr>
......
......@@ -96,6 +96,18 @@ public:
wxPoint CursorRealPosition( const wxPoint& ScreenPos );
wxPoint CursorScreenPosition();
/**
* Function PostDirtyRect
* appends the given rectangle in pcb units to the DrawPanel's invalid
* region list so that very soon (but not immediately), this rectangle
* along with any other recently posted rectangles is redrawn. Conversion
* to pixels is done in here.
* @param aRect The rectangle to append, it must be orthogonal
* (vertical and horizontal edges only), and it must be [,) in nature, i.e.
* [pos, dim) == [inclusive, exclusive)
*/
void PostDirtyRect( EDA_Rect aRect );
/**
* Function ConvertPcbUnitsToPixelsUnits
* converts pos and size of the given EDA_Rect to pos and size in pixels,
......
......@@ -476,7 +476,7 @@ public:
TRACK* Delete_Segment( wxDC* DC, TRACK* Track );
void Delete_Track( wxDC* DC, TRACK* Track );
void Delete_net( wxDC* DC, TRACK* Track );
void Supprime_Une_Piste( wxDC* DC, TRACK* pt_segm );
void Remove_One_Track( wxDC* DC, TRACK* pt_segm );
bool Resize_Pistes_Vias( wxDC* DC, bool Track, bool Via );
void Edit_Net_Width( wxDC* DC, int Netcode );
void Edit_Track_Width( wxDC* DC, TRACK* Track );
......@@ -489,7 +489,7 @@ public:
void Attribut_net( wxDC* DC, int net_code, bool Flag_On );
void Start_MoveOneNodeOrSegment( TRACK* track, wxDC* DC, int command );
bool PlaceDraggedTrackSegment( TRACK* Track, wxDC* DC );
bool MergeCollinearTracks( TRACK* track, wxDC* DC, int end );
bool MergeCollinearTracks( TRACK* track, wxDC* DC, int end );
void Start_DragTrackSegmentAndKeepSlope( TRACK* track, wxDC* DC );
void SwitchLayer( wxDC* DC, int layer );
int Add_45_degrees_Segment( wxDC* DC, TRACK* pt_segm );
......
......@@ -210,11 +210,37 @@ EDA_Rect TRACK::GetBoundingBox() const
// end of track is round, this is its radius, rounded up
int radius = ( m_Width+1 )/2;
int ymax = MAX( m_Start.y, m_End.y );
int xmax = MAX( m_Start.x, m_End.x );
int ymax;
int xmax;
int ymin = MIN( m_Start.y, m_End.y );
int xmin = MIN( m_Start.x, m_End.x );
int ymin;
int xmin;
if( Type() == TYPEVIA )
{
// because vias are sometimes drawn larger than their m_Width would
// provide, erasing them using a dirty rect must also compensate for
// possibility (that the via is larger than its m_Width would provide).
// because it is cheap to return a larger BoundingBox, do it so that
// the via gets erased properly. Do not divide width by 2 for this reason.
radius = m_Width;
ymax = m_Start.y;
xmax = m_Start.x;
ymin = m_Start.y;
xmin = m_Start.x;
}
else
{
radius = ( m_Width+1 )/2;
ymax = MAX( m_Start.y, m_End.y );
xmax = MAX( m_Start.x, m_End.x );
ymin = MIN( m_Start.y, m_End.y );
xmin = MIN( m_Start.x, m_End.x );
}
ymax += radius;
xmax += radius;
......@@ -890,39 +916,6 @@ void TRACK::Display_Infos( WinEDA_DrawFrame* frame )
*/
bool TRACK::HitTest( const wxPoint& ref_pos )
{
#if 0
int l_piste; /* demi-largeur de la piste */
int dx, dy, spot_cX, spot_cY;
int ux0, uy0;
/* calcul des coordonnees du segment teste */
l_piste = m_Width >> 1; /* l_piste = demi largeur piste */
ux0 = m_Start.x;
uy0 = m_Start.y; /* coord de depart */
dx = m_End.x;
dy = m_End.y; /* coord d'arrivee */
/* recalcul des coordonnees avec ux0, uy0 = origine des coordonnees */
dx -= ux0;
dy -= uy0;
spot_cX = ref_pos.x - ux0;
spot_cY = ref_pos.y - uy0;
if( Type() == TYPEVIA ) /* VIA rencontree */
{
return (double) spot_cX * spot_cX + (double) spot_cY * spot_cY <=
(double) l_piste * l_piste;
}
else
{
if( DistanceTest( l_piste, dx, dy, spot_cX, spot_cY ) )
return true;
}
#else
int radius = m_Width >> 1;
// (dx, dy) is a vector from m_Start to m_End (an origin of m_Start)
......@@ -944,8 +937,6 @@ bool TRACK::HitTest( const wxPoint& ref_pos )
return true;
}
#endif
return false;
}
......
......@@ -53,7 +53,7 @@ void WinEDA_PcbFrame::Clean_Pcb( wxDC* DC )
{
s_ConnectToPads = false;
WinEDA_CleaningOptionsFrame* frame = new WinEDA_CleaningOptionsFrame( this, DC );
frame->ShowModal();
frame->ShowModal();
frame->Destroy();
DrawPanel->Refresh( true );
}
......@@ -74,7 +74,7 @@ void Clean_Pcb_Items( WinEDA_PcbFrame* frame, wxDC* DC )
{
frame->MsgPanel->EraseMsgBox();
frame->m_Pcb->GetNumSegmTrack(); // update the count
/* Rebuild the pad infos (pad list and netcodes) to ensure an up to date info */
frame->m_Pcb->m_Status_Pcb = 0;
frame->build_liste_pads();
......@@ -88,7 +88,7 @@ void Clean_Pcb_Items( WinEDA_PcbFrame* frame, wxDC* DC )
{
if( track->Shape() != VIA_THROUGH )
continue;
// Search and delete others vias at same location
TRACK* alt_track = track->Next();
for( ; alt_track != NULL; alt_track = next_track )
......@@ -96,10 +96,10 @@ void Clean_Pcb_Items( WinEDA_PcbFrame* frame, wxDC* DC )
next_track = alt_track->Next();
if( alt_track->m_Shape != VIA_THROUGH )
continue;
if( alt_track->m_Start != track->m_Start )
continue;
/* delete via */
alt_track->UnLink();
delete alt_track;
......@@ -112,7 +112,7 @@ void Clean_Pcb_Items( WinEDA_PcbFrame* frame, wxDC* DC )
next_track = track->Next();
if( track->m_Shape != VIA_THROUGH )
continue;
D_PAD* pad = Fast_Locate_Pad_Connecte( frame->m_Pcb, track->m_Start, ALL_CU_LAYERS );
if( pad && (pad->m_Masque_Layer & EXTERNAL_LAYERS) == EXTERNAL_LAYERS ) // redundant Via
{
......@@ -124,18 +124,18 @@ void Clean_Pcb_Items( WinEDA_PcbFrame* frame, wxDC* DC )
}
#ifdef CONN2PAD_ENBL
/* Create missing segments when a track end covers a pad or a via,
but is not on the pad or the via center */
/* Create missing segments when a track end covers a pad or a via,
but is not on the pad or the via center */
if( s_ConnectToPads )
{
/* Create missing segments when a track end covers a pad, but is not on the pad center */
/* Create missing segments when a track end covers a pad, but is not on the pad center */
if( s_ConnectToPads )
ConnectDanglingEndToPad( frame, DC );
// creation of points of connections at the intersection of tracks
// Gen_Raccord_Track(frame, DC);
/* Create missing segments when a track end covers a via, but is not on the via center */
/* Create missing segments when a track end covers a via, but is not on the via center */
if( s_ConnectToPads )
ConnectDanglingEndToVia( frame->m_Pcb );
}
......@@ -169,7 +169,7 @@ static void DeleteUnconnectedTracks( WinEDA_PcbFrame* frame, wxDC* DC )
TRACK* other;
TRACK* startNetcode;
TRACK* next;
int nbpoints_supprimes = 0;
int masklayer, oldnetcode;
int type_end, flag_erase;
......@@ -186,13 +186,13 @@ static void DeleteUnconnectedTracks( WinEDA_PcbFrame* frame, wxDC* DC )
{
frame->m_Pcb->m_NbSegmTrack++;
next = segment->Next();
if( segment->Type() == TYPEVIA )
{
if( segment->m_Start != segment->m_End )
{
segment->m_End = segment->m_Start;
ii++;
msg.Printf( wxT( "%d " ), ii );
Affiche_1_Parametre( frame, POS_AFF_PASSE, _( "ViaDef" ), msg, LIGHTRED );
......@@ -202,15 +202,15 @@ static void DeleteUnconnectedTracks( WinEDA_PcbFrame* frame, wxDC* DC )
}
// removal of unconnected tracks
percent = 0;
percent = 0;
oldpercent = -1;
oldnetcode = 0;
oldnetcode = 0;
segment = startNetcode = frame->m_Pcb->m_Track;
for( ii = 0; segment; segment = next, ii++ )
{
next = segment->Next();
// display activity
percent = (100 * ii) / frame->m_Pcb->m_NbSegmTrack;
if( percent != oldpercent )
......@@ -220,7 +220,7 @@ static void DeleteUnconnectedTracks( WinEDA_PcbFrame* frame, wxDC* DC )
msg.Printf( wxT( "%d " ), frame->m_Pcb->m_NbSegmTrack );
Affiche_1_Parametre( frame, POS_AFF_MAX, wxT( "Max" ), msg, GREEN );
msg.Printf( wxT( "%d " ), ii );
Affiche_1_Parametre( frame, POS_AFF_NUMSEGM, wxT( "Segm" ), msg, CYAN );
}
......@@ -230,11 +230,11 @@ static void DeleteUnconnectedTracks( WinEDA_PcbFrame* frame, wxDC* DC )
if( segment->GetNet() != oldnetcode )
{
startNetcode = segment;
startNetcode = segment;
oldnetcode = segment->GetNet();
}
flag_erase = 0;
flag_erase = 0;
type_end = 0;
/* Is a pad found on a track end ? */
......@@ -242,7 +242,7 @@ static void DeleteUnconnectedTracks( WinEDA_PcbFrame* frame, wxDC* DC )
masklayer = segment->ReturnMaskLayer();
D_PAD* pad;
pad = Fast_Locate_Pad_Connecte( frame->m_Pcb, segment->m_Start, masklayer );
if( pad != NULL )
{
......@@ -268,19 +268,19 @@ static void DeleteUnconnectedTracks( WinEDA_PcbFrame* frame, wxDC* DC )
else // segment or via connected to this end
{
segment->start = other;
if( other->Type() == TYPEVIA )
if( other->Type() == TYPEVIA )
{
// search for another segment following the via
segment->SetState( BUSY, ON );
TRACK* via = other;
other = Locate_Piste_Connectee( via, frame->m_Pcb->m_Track,
NULL, START );
if( other == NULL )
flag_erase |= 2;
segment->SetState( BUSY, OFF );
}
}
......@@ -293,22 +293,22 @@ static void DeleteUnconnectedTracks( WinEDA_PcbFrame* frame, wxDC* DC )
NULL, END );
if( other == NULL )
flag_erase |= 0x10;
else // segment or via connected to this end
{
segment->end = other;
if( other->Type() == TYPEVIA )
{
// search for another segment following the via
segment->SetState( BUSY, ON );
TRACK* via = other;
other = Locate_Piste_Connectee( via, frame->m_Pcb->m_Track,
NULL, END );
if( other == NULL )
flag_erase |= 0x20;
segment->SetState( BUSY, OFF );
}
}
......@@ -317,10 +317,10 @@ static void DeleteUnconnectedTracks( WinEDA_PcbFrame* frame, wxDC* DC )
if( flag_erase )
{
oldpercent = -1; // force dispay activity
nbpoints_supprimes++;
nbpoints_supprimes++;
ii--;
msg.Printf( wxT( "%d " ), nbpoints_supprimes );
Affiche_1_Parametre( frame, POS_AFF_VAR, wxT( "NoConn." ), msg, LIGHTRED );
......@@ -336,7 +336,7 @@ static void DeleteUnconnectedTracks( WinEDA_PcbFrame* frame, wxDC* DC )
// remove segment from screen and board
segment->Draw( frame->DrawPanel, DC, GR_XOR );
segment->DeleteStructure();
if( next == NULL )
break;
}
......@@ -362,15 +362,15 @@ static int clean_segments( WinEDA_PcbFrame* frame, wxDC* DC )
/**********************************************/
a_color = GREEN;
nbpoints_supprimes = 0;
percent = 0;
nbpoints_supprimes = 0;
percent = 0;
oldpercent = -1;
frame->MsgPanel->EraseMsgBox();
frame->Affiche_Message( _( "Clean Null Segments" ) );
Affiche_1_Parametre( frame, POS_AFF_VAR, wxT( "NullSeg" ), wxT( "0" ), a_color );
for( segment = frame->m_Pcb->m_Track; segment; segment = segment->Next() )
{
if( !segment->IsNull() )
......@@ -390,10 +390,10 @@ static int clean_segments( WinEDA_PcbFrame* frame, wxDC* DC )
/**************************************/
Affiche_1_Parametre( frame, POS_AFF_VAR, wxT( "Ident" ), wxT( "0" ), a_color );
percent = 0;
oldpercent = -1;
for( segment = frame->m_Pcb->m_Track, ii = 0; segment; segment = segment->Next(), ii++ )
{
/* Display activity */
......@@ -405,7 +405,7 @@ static int clean_segments( WinEDA_PcbFrame* frame, wxDC* DC )
msg.Printf( wxT( "%d" ), frame->m_Pcb->m_NbSegmTrack );
Affiche_1_Parametre( frame, POS_AFF_MAX, wxT( "Max" ), msg, GREEN );
msg.Printf( wxT( "%d" ), ii );
Affiche_1_Parametre( frame, POS_AFF_NUMSEGM, wxT( "Segm" ), msg, CYAN );
......@@ -419,10 +419,10 @@ static int clean_segments( WinEDA_PcbFrame* frame, wxDC* DC )
if( segment->Type() != other->Type() )
continue;
if( segment->GetLayer() != other->GetLayer() )
continue;
if( segment->GetNet() != other->GetNet() )
break;
......@@ -457,7 +457,7 @@ static int clean_segments( WinEDA_PcbFrame* frame, wxDC* DC )
/*******************************/
nbpoints_supprimes = 0;
percent = 0;
percent = 0;
oldpercent = -1;
frame->Affiche_Message( _( "Merging Segments:" ) );
......@@ -472,17 +472,17 @@ static int clean_segments( WinEDA_PcbFrame* frame, wxDC* DC )
TRACK* segDelete;
next = segment->Next();
ii++;
percent = (100 * ii) / frame->m_Pcb->m_NbSegmTrack;
if( percent != oldpercent )
{
frame->DisplayActivity( percent, _( "Merge: " ) );
oldpercent = percent;
msg.Printf( wxT( "%d" ), frame->m_Pcb->m_NbSegmTrack );
Affiche_1_Parametre( frame, POS_AFF_MAX, wxT( "Max" ), msg, GREEN );
msg.Printf( wxT( "%d" ), ii );
Affiche_1_Parametre( frame, POS_AFF_NUMSEGM, wxT( "Segm" ), msg, CYAN );
......@@ -518,7 +518,7 @@ static int clean_segments( WinEDA_PcbFrame* frame, wxDC* DC )
if( other == NULL )
flag = 1; /* OK */
break;
}
break;
......@@ -542,7 +542,7 @@ static int clean_segments( WinEDA_PcbFrame* frame, wxDC* DC )
{
if( segment->m_Width != segEnd->m_Width )
break;
if( segEnd->Type() != TYPETRACK )
break;
......@@ -551,10 +551,10 @@ static int clean_segments( WinEDA_PcbFrame* frame, wxDC* DC )
other = Locate_Piste_Connectee( segment, frame->m_Pcb->m_Track,
NULL, END );
segEnd->SetState( BUSY, OFF );
if( other == NULL )
flag |= 2; /* Ok */
break;
}
else
......@@ -566,7 +566,7 @@ static int clean_segments( WinEDA_PcbFrame* frame, wxDC* DC )
segDelete = AlignSegment( frame->m_Pcb, segment, segEnd, END );
if( segDelete )
{
nbpoints_supprimes++;
nbpoints_supprimes++;
no_inc = 1;
segDelete->DeleteStructure();
}
......@@ -576,7 +576,7 @@ static int clean_segments( WinEDA_PcbFrame* frame, wxDC* DC )
{
msg.Printf( wxT( "%d " ), nbpoints_supprimes );
Affiche_1_Parametre( frame, POS_AFF_VAR, wxEmptyString, msg, a_color );
next = segment->Next();
}
}
......@@ -593,7 +593,7 @@ static TRACK* AlignSegment( BOARD* Pcb, TRACK* pt_ref, TRACK* pt_segm, int extre
* and see if the common point is not on a pad (i.e. if this common point can be removed).
* the ending point of pt_ref is the start point (extremite == START)
* or the end point (extremite == FIN)
* if the common end can be deleted, this function
* if the common end can be deleted, this function
* change the common point coordinate of the pt_ref segm
* (and therefore connect the 2 other ending points)
* and return pt_segm (which can be deleted).
......@@ -602,10 +602,10 @@ static TRACK* AlignSegment( BOARD* Pcb, TRACK* pt_ref, TRACK* pt_segm, int extre
{
int flag = 0;
int refdx = pt_ref->m_End.x - pt_ref->m_Start.x;
int refdx = pt_ref->m_End.x - pt_ref->m_Start.x;
int refdy = pt_ref->m_End.y - pt_ref->m_Start.y;
int segmdx = pt_segm->m_End.x - pt_segm->m_Start.x;
int segmdx = pt_segm->m_End.x - pt_segm->m_Start.x;
int segmdy = pt_segm->m_End.y - pt_segm->m_Start.y;
// test for vertical alignment (easy to handle)
......@@ -616,7 +616,7 @@ static TRACK* AlignSegment( BOARD* Pcb, TRACK* pt_ref, TRACK* pt_segm, int extre
else
flag = 1;
}
// test for horizontal alignment (easy to handle)
if( refdy == 0 )
{
......@@ -637,10 +637,10 @@ static TRACK* AlignSegment( BOARD* Pcb, TRACK* pt_ref, TRACK* pt_segm, int extre
}
/* Here we have 2 aligned segments:
We must change the pt_ref common point only if not on a pad
(this function) is called when thre is only 2 connected segments,
and if this point is not on a pad, it can be removed and the 2 segments will be merged
*/
We must change the pt_ref common point only if not on a pad
(this function) is called when thre is only 2 connected segments,
and if this point is not on a pad, it can be removed and the 2 segments will be merged
*/
if( extremite == START )
{
/* We do not have a pad */
......@@ -648,28 +648,28 @@ static TRACK* AlignSegment( BOARD* Pcb, TRACK* pt_ref, TRACK* pt_segm, int extre
g_TabOneLayerMask[pt_ref->GetLayer()] ) )
return NULL;
/* change the common point coordinate of pt_segm tu use the other point
of pt_segm (pt_segm will be removed later) */
/* change the common point coordinate of pt_segm tu use the other point
of pt_segm (pt_segm will be removed later) */
if( pt_ref->m_Start == pt_segm->m_Start )
{
pt_ref->m_Start = pt_segm->m_End;
pt_ref->m_Start = pt_segm->m_End;
return pt_segm;
}
else
{
pt_ref->m_Start = pt_segm->m_Start;
pt_ref->m_Start = pt_segm->m_Start;
return pt_segm;
}
}
else /* extremite == END */
{
/* We do not have a pad */
if( Fast_Locate_Pad_Connecte( Pcb, pt_ref->m_End,
if( Fast_Locate_Pad_Connecte( Pcb, pt_ref->m_End,
g_TabOneLayerMask[pt_ref->GetLayer()] ) )
return NULL;
/* change the common point coordinate of pt_segm tu use the other point
of pt_segm (pt_segm will be removed later) */
/* change the common point coordinate of pt_segm tu use the other point
of pt_segm (pt_segm will be removed later) */
if( pt_ref->m_End == pt_segm->m_Start )
{
pt_ref->m_End = pt_segm->m_End;
......@@ -691,7 +691,7 @@ int Netliste_Controle_piste( WinEDA_PcbFrame* frame, wxDC* DC, int affiche )
/**
* Function Netliste_Controle_piste
* finds all track segments which are mis-connected (to more than one net).
* finds all track segments which are mis-connected (to more than one net).
* When such a bad segment is found, mark it as needing to be removed (supression).
*/
{
......@@ -702,11 +702,11 @@ int Netliste_Controle_piste( WinEDA_PcbFrame* frame, wxDC* DC, int affiche )
int nbpoints_modifies = 0;
int flag = 0;
wxString msg;
int percent = 0;
int percent = 0;
int oldpercent = -1;
a_color = RED;
frame->Affiche_Message( _( "DRC Control:" ) );
frame->DrawPanel->m_AbortRequest = FALSE;
......@@ -724,10 +724,10 @@ int Netliste_Controle_piste( WinEDA_PcbFrame* frame, wxDC* DC, int affiche )
{
frame->DisplayActivity( percent, wxT( "Drc: " ) );
oldpercent = percent;
msg.Printf( wxT( "%d" ), frame->m_Pcb->m_NbSegmTrack );
Affiche_1_Parametre( frame, POS_AFF_MAX, wxT( "Max" ), msg, GREEN );
msg.Printf( wxT( "%d" ), frame->m_Pcb->m_NbSegmTrack );
Affiche_1_Parametre( frame, POS_AFF_NUMSEGM, wxT( "Segm" ), msg, CYAN );
......@@ -751,7 +751,7 @@ int Netliste_Controle_piste( WinEDA_PcbFrame* frame, wxDC* DC, int affiche )
if( other )
net_code_s = other->GetNet();
}
if( net_code_s < 0 )
continue; // the "start" of segment is not connected
......@@ -783,17 +783,17 @@ int Netliste_Controle_piste( WinEDA_PcbFrame* frame, wxDC* DC, int affiche )
for( segment = frame->m_Pcb->m_Track; segment; segment = next )
{
next = (TRACK*) segment->Next();
if( segment->GetState( FLAG0 ) ) //* if segment is marked as needing to be removed
{
segment->SetState( FLAG0, OFF );
flag = 1;
flag = 1;
oldpercent = -1;
frame->m_Pcb->m_Status_Pcb = 0;
frame->Supprime_Une_Piste( DC, segment );
frame->Remove_One_Track( DC, segment );
next = frame->m_Pcb->m_Track; /* NextS a peut etre ete efface */
if( affiche )
{
......@@ -818,7 +818,7 @@ static void Gen_Raccord_Track( WinEDA_PcbFrame* frame, wxDC* DC )
* Function Gen_Raccord_Track
* tests the ends of segments. If and end is on a segment of other track, but not
* on other's end, the other segment is cut into 2, the point of cut being the end of
* segment first being operated on. This is done so that the subsequent tests
* segment first being operated on. This is done so that the subsequent tests
* of connection, which do not test segment overlaps, will see this continuity.
*/
{
......@@ -845,10 +845,10 @@ static void Gen_Raccord_Track( WinEDA_PcbFrame* frame, wxDC* DC )
{
frame->DisplayActivity( percent, wxT( "Tracks: " ) );
oldpercent = percent;
msg.Printf( wxT( "%d" ), frame->m_Pcb->m_NbSegmTrack );
Affiche_1_Parametre( frame, POS_AFF_MAX, wxT( "Max" ), msg, GREEN );
msg.Printf( wxT( "%d" ), ii );
Affiche_1_Parametre( frame, POS_AFF_NUMSEGM, wxT( "Segm" ), msg, CYAN );
}
......@@ -862,47 +862,47 @@ static void Gen_Raccord_Track( WinEDA_PcbFrame* frame, wxDC* DC )
for( other = frame->m_Pcb->m_Track; other; other = other->Next() )
{
TRACK* newTrack;
other = Locate_Pistes( other, segment->m_Start, masquelayer );
if( other == NULL )
break;
if( other == segment )
continue;
if( other->Type() == TYPEVIA )
continue;
if( segment->m_Start == other->m_Start )
continue;
if( segment->m_Start == other->m_End )
continue;
// Test if the "end" of this segment is already connected to other
if( segment->m_End == other->m_Start )
continue;
if( segment->m_End == other->m_End )
continue;
other->Draw( frame->DrawPanel, DC, GR_XOR );
nn++;
msg.Printf( wxT( "%d" ), nn );
Affiche_1_Parametre( frame, POS_AFF_VAR, wxT( "New <" ), msg, YELLOW );
frame->m_Pcb->m_NbSegmTrack++;
// create a new segment and insert it next to "other", then shorten other.
// create a new segment and insert it next to "other", then shorten other.
newTrack = other->Copy();
newTrack->Insert( frame->m_Pcb, other );
other->m_End = segment->m_Start;
newTrack->m_Start = segment->m_Start;
Trace_Une_Piste( frame->DrawPanel, DC, other, 2, GR_OR );
// skip forward one, skipping the newTrack
other = newTrack;
}
......@@ -911,46 +911,46 @@ static void Gen_Raccord_Track( WinEDA_PcbFrame* frame, wxDC* DC )
for( other = frame->m_Pcb->m_Track; other; other = other->Next() )
{
TRACK* newTrack;
other = Locate_Pistes( other, segment->m_End, masquelayer );
if( other == NULL )
break;
if( other == segment )
continue;
if( other->Type() == TYPEVIA )
continue;
if( segment->m_End == other->m_Start )
continue;
if( segment->m_End == other->m_End )
continue;
if( segment->m_Start == other->m_Start )
continue;
if( segment->m_Start == other->m_End )
continue;
other->Draw( frame->DrawPanel, DC, GR_XOR );
nn++;
nn++;
msg.Printf( wxT( "%d" ), nn );
Affiche_1_Parametre( frame, POS_AFF_VAR, wxT( "New >" ), msg, YELLOW );
frame->m_Pcb->m_NbSegmTrack++;
// create a new segment and insert it next to "other", then shorten other.
// create a new segment and insert it next to "other", then shorten other.
newTrack = other->Copy();
newTrack->Insert( frame->m_Pcb, other );
other->m_End = segment->m_End;
newTrack->m_Start = segment->m_End;
other->m_End = segment->m_End;
newTrack->m_Start = segment->m_End;
Trace_Une_Piste( frame->DrawPanel, DC, other, 2, GR_OR );
// skip forward one, skipping the newTrack
other = newTrack;
}
......@@ -969,15 +969,15 @@ static void Gen_Raccord_Track( WinEDA_PcbFrame* frame, wxDC* DC )
* Note that this is not a rigorous electrical check, but is better than
* testing for the track endpoint equaling the via center. When such a via
* is found, then add a small track to bridge from the overlapping track to
* the via and change the via's netcode so that subsequent continuity checks
* can be done with the faster equality algorithm.
* the via and change the via's netcode so that subsequent continuity checks
* can be done with the faster equality algorithm.
*/
static void ConnectDanglingEndToVia( BOARD* pcb )
{
for( TRACK* track = pcb->m_Track; track; track = track->Next() )
{
SEGVIA* via;
if( track->Type()!=TYPEVIA || (via = (SEGVIA*)track)->GetNet()!=0 )
continue;
......@@ -988,47 +988,47 @@ static void ConnectDanglingEndToVia( BOARD* pcb )
if( !via->IsOnLayer( other->GetLayer() ) )
continue;
// if the other track's m_End does not match the via position, and the track's m_Start is
// within the bounds of the via, and the other track has no start
if( other->m_End!=via->GetPosition() && via->HitTest( other->m_Start ) && !other->start )
{
TRACK* newTrack = other->Copy();
newTrack->Insert( pcb, other );
newTrack->m_End = via->GetPosition();
newTrack->start = other;
newTrack->end = via;
other->start = newTrack;
via->SetNet( other->GetNet() );
if( !via->start )
via->start = other;
if( !via->end )
via->end = other;
}
// if the other track's m_Start does not match the via position, and the track's m_End is
// within the bounds of the via, and the other track has no end
else if( other->m_Start!=via->GetPosition() && via->HitTest( other->m_End ) && !other->end )
else if( other->m_Start!=via->GetPosition() && via->HitTest( other->m_End ) && !other->end )
{
TRACK* newTrack = other->Copy();
newTrack->Insert( pcb, other );
newTrack->m_Start = via->GetPosition();
newTrack->start = via;
newTrack->end = other;
other->end = newTrack;
via->SetNet( other->GetNet() );
if( !via->start )
via->start = other;
if( !via->end )
via->end = other;
}
......@@ -1044,18 +1044,18 @@ void ConnectDanglingEndToPad( WinEDA_PcbFrame* frame, wxDC* DC )
/**
* Function ConnectDanglingEndToPad
* possibly adds a segment to the end of any and all tracks if their end is not exactly
* connected into the center of the pad. This allows faster control of
* connected into the center of the pad. This allows faster control of
* connections.
*/
{
TRACK* segment;
int nb_new_piste = 0;
wxString msg;
int percent = 0;
int percent = 0;
int oldpercent = -1;
a_color = GREEN;
frame->DrawPanel->m_AbortRequest = FALSE;
Affiche_1_Parametre( frame, POS_AFF_VAR, _( "Centre" ), _( "0 " ), a_color );
......@@ -1064,17 +1064,17 @@ void ConnectDanglingEndToPad( WinEDA_PcbFrame* frame, wxDC* DC )
for( segment = frame->m_Pcb->m_Track; segment; segment = segment->Next() )
{
D_PAD* pad;
ii++;
percent = (100 * ii) / frame->m_Pcb->m_NbSegmTrack;
if( percent != oldpercent )
{
frame->DisplayActivity( percent, _( "Pads: " ) );
oldpercent = percent;
msg.Printf( wxT( "%d" ), frame->m_Pcb->m_NbSegmTrack );
Affiche_1_Parametre( frame, POS_AFF_MAX, _( "Max" ), msg, GREEN );
msg.Printf( wxT( "%d" ), ii );
Affiche_1_Parametre( frame, POS_AFF_NUMSEGM, _( "Segm" ), msg, CYAN );
......@@ -1084,7 +1084,7 @@ void ConnectDanglingEndToPad( WinEDA_PcbFrame* frame, wxDC* DC )
pad = Locate_Pad_Connecte( frame->m_Pcb, segment, START );
if( pad )
{
{
// test if the track is not precisely starting on the found pad
if( segment->m_Start != pad->m_Pos )
{
......@@ -1093,14 +1093,14 @@ void ConnectDanglingEndToPad( WinEDA_PcbFrame* frame, wxDC* DC )
{
TRACK* newTrack = segment->Copy();
newTrack->Insert( frame->m_Pcb, segment );
newTrack->m_End = pad->m_Pos;
newTrack->start = segment;
newTrack->end = pad;
nb_new_piste++;
newTrack->Draw( frame->DrawPanel, DC, GR_OR );
Affiche_1_Parametre( frame, POS_AFF_VAR, wxEmptyString, msg, a_color );
}
......@@ -1109,7 +1109,7 @@ void ConnectDanglingEndToPad( WinEDA_PcbFrame* frame, wxDC* DC )
pad = Locate_Pad_Connecte( frame->m_Pcb, segment, END );
if( pad )
{
{
// test if the track is not precisely ending on the found pad
if( segment->m_End != pad->m_Pos )
{
......@@ -1118,12 +1118,12 @@ void ConnectDanglingEndToPad( WinEDA_PcbFrame* frame, wxDC* DC )
{
TRACK* newTrack = segment->Copy();
newTrack->Insert( frame->m_Pcb, segment );
newTrack->m_Start = pad->m_Pos;
newTrack->start = pad;
newTrack->end = segment;
nb_new_piste++;
msg.Printf( wxT( "e %d" ), nb_new_piste );
......
......@@ -119,29 +119,8 @@ TRACK* WinEDA_PcbFrame::Delete_Segment( wxDC* DC, TRACK* Track )
current_net_code = Track->GetNet();
#if 0
Track->Draw( DrawPanel, DC, GR_XOR );
#else
// redraw the area where the track was
// this rectangle is correct
EDA_Rect dirty = Track->GetBoundingBox();
// Convert the rect coordinates and size in pixels (make a draw clip box):
DrawPanel->ConvertPcbUnitsToPixelsUnits( &dirty );
/* now that TRACK::GetBoundingBox() returns a [,) type of rectangle, and
rounds up the track radius, let's see if this is really needed.
// Ensure the last line and column are in the dirty rectangle after truncatures
dirty.m_Size.x += 1; dirty.m_Size.y += 1;
*/
// pass wxRect() via EDA_Rect::operator wxRect() overload
DrawPanel->RefreshRect( dirty, TRUE );
#endif
DrawPanel->PostDirtyRect( Track->GetBoundingBox() );
SaveItemEfface( Track, 1 );
GetScreen()->SetModify();
......@@ -159,7 +138,7 @@ void WinEDA_PcbFrame::Delete_Track( wxDC* DC, TRACK* Track )
if( Track != NULL )
{
int current_net_code = Track->GetNet();
Supprime_Une_Piste( DC, Track );
Remove_One_Track( DC, Track );
GetScreen()->SetModify();
test_1_net_connexion( DC, current_net_code );
}
......@@ -205,7 +184,7 @@ void WinEDA_PcbFrame::Delete_net( wxDC* DC, TRACK* Track )
/********************************************************************/
void WinEDA_PcbFrame::Supprime_Une_Piste( wxDC* DC, TRACK* pt_segm )
void WinEDA_PcbFrame::Remove_One_Track( wxDC* DC, TRACK* pt_segm )
/********************************************************************/
/* Routine de suppression de 1 piste:
......@@ -213,26 +192,25 @@ void WinEDA_PcbFrame::Supprime_Une_Piste( wxDC* DC, TRACK* pt_segm )
* jusqu'a un pad ou un point de jonction de plus de 2 segments
*/
{
TRACK* pt_track, * Struct;
int ii, nb_segm;
TRACK* trackList;
int nb_segm;
if( pt_segm == NULL )
return;
pt_track = Marque_Une_Piste( this, DC, pt_segm,
&nb_segm, GR_OR | GR_SURBRILL );
trackList = Marque_Une_Piste( this, DC, pt_segm, &nb_segm, 0 );
if( nb_segm ) /* Il y a nb_segm segments de piste a effacer */
{
Trace_Une_Piste( DrawPanel, DC, pt_track, nb_segm, GR_XOR | GR_SURBRILL );
/* Effacement flag BUSY */
Struct = pt_track;;
for( ii = 0; ii<nb_segm; ii++, Struct = (TRACK*) Struct->Pnext )
TRACK* t;
int ii;
for( t = trackList, ii=0; ii<nb_segm; ii++, t = t->Next() )
{
Struct->SetState( BUSY, OFF );
t->SetState( BUSY, OFF );
DrawPanel->PostDirtyRect( t->GetBoundingBox() );
}
SaveItemEfface( pt_track, nb_segm );
SaveItemEfface( trackList, nb_segm );
}
}
......@@ -110,17 +110,23 @@ TRACK* Marque_Une_Piste( WinEDA_BasePcbFrame* frame, wxDC* DC,
int layer;
if( Segm->RefTrack->Type() != TYPEVIA )
continue;
if( Segm->RefTrack == pt_segm )
continue;
Segm->RefTrack->SetState( BUSY, ON );
masque_layer = Segm->RefTrack->ReturnMaskLayer();
Track = Fast_Locate_Piste( frame->m_Pcb->m_Track, NULL,
Segm->RefTrack->m_Start,
masque_layer );
if( Track == NULL )
continue;
/* Test des connexions: si via utile: suppression marquage */
layer = Track->GetLayer();
while( ( Track = Fast_Locate_Piste( (TRACK*) Track->Pnext, NULL,
Segm->RefTrack->m_Start,
masque_layer ) ) != NULL )
......@@ -136,7 +142,8 @@ TRACK* Marque_Une_Piste( WinEDA_BasePcbFrame* frame, wxDC* DC,
/* liberation memoire */
for( Segm = ListSegm; Segm != NULL; Segm = NextSegm )
{
NextSegm = Segm->Pnext; delete Segm;
NextSegm = Segm->Pnext;
delete Segm;
}
ListSegm = NULL;
......@@ -144,10 +151,12 @@ TRACK* Marque_Une_Piste( WinEDA_BasePcbFrame* frame, wxDC* DC,
/* Reclassement des segments marques en une chaine */
FirstTrack = frame->m_Pcb->m_Track; NbSegmBusy = 0;
for( ; FirstTrack != NULL; FirstTrack = (TRACK*) FirstTrack->Pnext )
{ /* recherche du debut de la liste des segments marques a BUSY */
{
/* recherche du debut de la liste des segments marques a BUSY */
if( FirstTrack->GetState( BUSY ) )
{
NbSegmBusy = 1; break;
NbSegmBusy = 1;
break;
}
}
......@@ -182,7 +191,7 @@ static void Marque_Chaine_segments( BOARD* Pcb, wxPoint ref_pos, int masque_laye
* routine utilisee par Supprime_1_Piste()
* Positionne le bit BUSY dans la chaine de segments commencant
* au point ox, oy sur la couche layer
*
*
* Les vias sont mises en liste des segments traites mais ne sont pas
* marquees.
*/
......
......@@ -266,6 +266,21 @@ bool WinEDA_DrawPanel::IsPointOnDisplay( wxPoint ref_pos )
}
void WinEDA_DrawPanel::PostDirtyRect( EDA_Rect aRect )
{
// Convert the rect coordinates and size to pixels (make a draw clip box):
ConvertPcbUnitsToPixelsUnits( &aRect );
// Ensure the last line and column are in the dirty rectangle after truncations.
// The pcb units have finer granularity than the pixels, so this can happen.
aRect.m_Size.x += 1;
aRect.m_Size.y += 1;
// pass wxRect() via EDA_Rect::operator wxRect() overload
RefreshRect( aRect, TRUE );
}
/************************************************************************/
void WinEDA_DrawPanel::ConvertPcbUnitsToPixelsUnits( EDA_Rect* aRect )
/************************************************************************/
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment