Skip to content

K
kicad-source-mirror
Commit 2d49ced7 authored by jean-pierre charras's avatar jean-pierre charras
Browse files
Options

Pcbnew: fix compil warning and a minor bug in plot negative (frame fer... 

Pcbnew: fix  compil warning and a minor bug in plot negative (frame fer plotted in white therefore not visible).
minor code cleaning
parent c646c2f8
Show whitespace changes
Inline Side-by-side
Showing with 815 additions and 728 deletions
pcbnew/CMakeLists.txt
View file @ 2d49ced7
...@@ -189,7 +189,8 @@ set(PCBNEW_CLASS_SRCS ...@@ -189,7 +189,8 @@ set(PCBNEW_CLASS_SRCS
pcbnew.cpp pcbnew.cpp
pcbnew_config.cpp pcbnew_config.cpp
pcbplot.cpp pcbplot.cpp
plot_rtn.cpp plot_board_layers.cpp
plot_brditems_plotter.cpp
print_board_functions.cpp print_board_functions.cpp
printout_controler.cpp printout_controler.cpp
ratsnest.cpp ratsnest.cpp
......
pcbnew/pcb_plot_params.cpp
View file @ 2d49ced7
...@@ -145,6 +145,10 @@ void PCB_PLOT_PARAMS::Format( OUTPUTFORMATTER* aFormatter, ...@@ -145,6 +145,10 @@ void PCB_PLOT_PARAMS::Format( OUTPUTFORMATTER* aFormatter,
m_useAuxOrigin ? trueStr : falseStr ); m_useAuxOrigin ? trueStr : falseStr );
aFormatter->Print( aNestLevel+1, "(%s %d)\n", getTokenName( T_hpglpennumber ), aFormatter->Print( aNestLevel+1, "(%s %d)\n", getTokenName( T_hpglpennumber ),
m_HPGLPenNum ); m_HPGLPenNum );
// Obsolete parameter, pen speed is no more managed, because hpgl format
// is now an export format, and for this, pen speed has no meaning
// aFormatter->Print( aNestLevel+1, "(%s %d)\n", getTokenName( T_hpglpenspeed ),
// m_HPGLPenSpeed );
aFormatter->Print( aNestLevel+1, "(%s %d)\n", getTokenName( T_hpglpenspeed ), aFormatter->Print( aNestLevel+1, "(%s %d)\n", getTokenName( T_hpglpenspeed ),
m_HPGLPenSpeed ); m_HPGLPenSpeed );
aFormatter->Print( aNestLevel+1, "(%s %d)\n", getTokenName( T_hpglpendiameter ), aFormatter->Print( aNestLevel+1, "(%s %d)\n", getTokenName( T_hpglpendiameter ),
......
pcbnew/pcbplot.h
View file @ 2d49ced7
...@@ -41,11 +41,13 @@ class BOARD; ...@@ -41,11 +41,13 @@ class BOARD;
// Convert pcb dimension of 0.1 mil to PS units of inches. // Convert pcb dimension of 0.1 mil to PS units of inches.
#define SCALE_PS .0001 #define SCALE_PS .0001
// Convert dimension 0.1 mil -> HPGL units: // Convert dimension 0.1 mil -> HPGL units (1 HPGL unit = 25 micrometers):
#define SCALE_HPGL 0.102041 #define SCALE_HPGL 0.102041
// Small drill marks diameter value (in 1/10000 inch) // Small drill marks (small pad holes) diameter value
#define SMALL_DRILL 150 #define SMALL_DRILL (int)( 0.35 * IU_PER_MM )
// A helper class to plot board items // A helper class to plot board items
class BRDITEMS_PLOTTER: public PCB_PLOT_PARAMS class BRDITEMS_PLOTTER: public PCB_PLOT_PARAMS
{ {
......
pcbnew/plot_rtn.cpp → pcbnew/plot_board_layers.cpp
View file @ 2d49ced7
/** /**
* @file plot_rtn.cpp * @file plot_board_layers.cpp
* @brief Common plot routines. * @brief Functions to plot one board layer (silkscreen layers or other layers).
* Silkscreen layers have specific requirement for pads (not filled) and texts
* (with option to remove them from some copper areas (pads...)
*/ */
/*
* This program source code file is part of KiCad, a free EDA CAD application.
*
* Copyright (C) 1992-2012 KiCad Developers, see AUTHORS.txt for contributors.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, you may find one here:
* http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
* or you may search the http://www.gnu.org website for the version 2 license,
* or you may write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
*/
#include <fctsys.h> #include <fctsys.h>
#include <common.h> #include <common.h>
#include <plot_common.h> #include <plot_common.h>
...@@ -25,126 +51,9 @@ ...@@ -25,126 +51,9 @@
#include <pcbnew.h> #include <pcbnew.h>
#include <pcbplot.h> #include <pcbplot.h>
/* Function getColor
* return the layer colorfrom the layer id
* White color is special: cannot be seen on a white paper
* and in B&W mode, is plotted as white but other colors are plotted in BLACK
* so the returned color is LIGHTGRAY when the layer color is WHITE
*/
EDA_COLOR_T BRDITEMS_PLOTTER::getColor( int aLayer )
{
EDA_COLOR_T color = m_board->GetLayerColor( aLayer );
if (color == WHITE)
color = LIGHTGRAY;
return color;
}
bool BRDITEMS_PLOTTER::PlotAllTextsModule( MODULE* aModule )
{
// see if we want to plot VALUE and REF fields
bool trace_val = GetPlotValue();
bool trace_ref = GetPlotReference();
TEXTE_MODULE* textModule = aModule->m_Reference;
unsigned textLayer = textModule->GetLayer();
if( textLayer >= 32 )
return false;
if( ( ( 1 << textLayer ) & m_layerMask ) == 0 )
trace_ref = false;
if( !textModule->IsVisible() && !GetPlotInvisibleText() )
trace_ref = false;
textModule = aModule->m_Value;
textLayer = textModule->GetLayer();
if( textLayer > 32 )
return false;
if( ( (1 << textLayer) & m_layerMask ) == 0 )
trace_val = false;
if( !textModule->IsVisible() && !GetPlotInvisibleText() )
trace_val = false;
// Plot text fields, if allowed
if( trace_ref )
{
if( GetReferenceColor() == UNSPECIFIED_COLOR )
PlotTextModule( aModule->m_Reference, getColor( textLayer ) );
else
PlotTextModule( aModule->m_Reference, GetReferenceColor() );
}
if( trace_val )
{
if( GetValueColor() == UNSPECIFIED_COLOR )
PlotTextModule( aModule->m_Value, getColor( textLayer ) );
else
PlotTextModule( aModule->m_Value, GetValueColor() );
}
for( textModule = (TEXTE_MODULE*) aModule->m_Drawings.GetFirst();
textModule != NULL; textModule = textModule->Next() )
{
if( textModule->Type() != PCB_MODULE_TEXT_T )
continue;
if( !GetPlotOtherText() )
continue;
if( !textModule->IsVisible() && !GetPlotInvisibleText() )
continue;
textLayer = textModule->GetLayer();
if( textLayer >= 32 )
return false;
if( !( ( 1 << textLayer ) & m_layerMask ) )
continue;
PlotTextModule( textModule, getColor( textLayer ) );
}
return true;
}
// plot items like text and graphics, but not tracks and module
void BRDITEMS_PLOTTER::PlotBoardGraphicItems()
{
for( BOARD_ITEM* item = m_board->m_Drawings; item; item = item->Next() )
{
switch( item->Type() )
{
case PCB_LINE_T:
PlotDrawSegment( (DRAWSEGMENT*) item);
break;
case PCB_TEXT_T:
PlotTextePcb( (TEXTE_PCB*) item );
break;
case PCB_DIMENSION_T:
PlotDimension( (DIMENSION*) item );
break;
case PCB_TARGET_T:
PlotPcbTarget( (PCB_TARGET*) item );
break;
case PCB_MARKER_T:
default:
break;
}
}
}
/* Creates the plot for silkscreen layers /* Creates the plot for silkscreen layers
* Silkscreen layers have specific requirement for pads (not filled) and texts
* (with option to remove them from some copper areas (pads...)
*/ */
void PlotSilkScreen( BOARD *aBoard, PLOTTER* aPlotter, long aLayerMask, void PlotSilkScreen( BOARD *aBoard, PLOTTER* aPlotter, long aLayerMask,
const PCB_PLOT_PARAMS& aPlotOpt ) const PCB_PLOT_PARAMS& aPlotOpt )
...@@ -252,440 +161,6 @@ void PlotSilkScreen( BOARD *aBoard, PLOTTER* aPlotter, long aLayerMask, ...@@ -252,440 +161,6 @@ void PlotSilkScreen( BOARD *aBoard, PLOTTER* aPlotter, long aLayerMask,
} }
} }
void BRDITEMS_PLOTTER::PlotTextModule( TEXTE_MODULE* pt_texte,
EDA_COLOR_T aColor )
{
wxSize size;
wxPoint pos;
int orient, thickness;
if( aColor == WHITE )
aColor = LIGHTGRAY;
m_plotter->SetColor( aColor );
// calculate some text parameters :
size = pt_texte->m_Size;
pos = pt_texte->m_Pos;
orient = pt_texte->GetDrawRotation();
thickness = pt_texte->m_Thickness;
if( GetMode() == LINE )
thickness = -1;
if( pt_texte->m_Mirror )
NEGATE( size.x ); // Text is mirrored
// Non bold texts thickness is clamped at 1/6 char size by the low level draw function.
// but in Pcbnew we do not manage bold texts and thickness up to 1/4 char size
// (like bold text) and we manage the thickness.
// So we set bold flag to true
bool allow_bold = pt_texte->m_Bold || thickness;
m_plotter->Text( pos, aColor,
pt_texte->m_Text,
orient, size,
pt_texte->m_HJustify, pt_texte->m_VJustify,
thickness, pt_texte->m_Italic, allow_bold );
}
void BRDITEMS_PLOTTER::PlotDimension( DIMENSION* aDim )
{
if( (GetLayerMask( aDim->GetLayer() ) & m_layerMask) == 0 )
return;
DRAWSEGMENT draw;
draw.SetWidth( (GetMode() == LINE) ? -1 : aDim->GetWidth() );
draw.SetLayer( aDim->GetLayer() );
EDA_COLOR_T color = aDim->GetBoard()->GetLayerColor( aDim->GetLayer() );
// Set plot color (change WHITE to LIGHTGRAY because
// the white items are not seen on a white paper or screen
m_plotter->SetColor( color != WHITE ? color : LIGHTGRAY);
PlotTextePcb( &aDim->m_Text );
draw.SetStart( wxPoint( aDim->m_crossBarOx, aDim->m_crossBarOy ));
draw.SetEnd( wxPoint( aDim->m_crossBarFx, aDim->m_crossBarFy ));
PlotDrawSegment( &draw );
draw.SetStart( wxPoint( aDim->m_featureLineGOx, aDim->m_featureLineGOy ));
draw.SetEnd( wxPoint( aDim->m_featureLineGFx, aDim->m_featureLineGFy ));
PlotDrawSegment( &draw );
draw.SetStart( wxPoint( aDim->m_featureLineDOx, aDim->m_featureLineDOy ));
draw.SetEnd( wxPoint( aDim->m_featureLineDFx, aDim->m_featureLineDFy ));
PlotDrawSegment( &draw );
draw.SetStart( wxPoint( aDim->m_arrowD1Ox, aDim->m_arrowD1Oy ));
draw.SetEnd( wxPoint( aDim->m_arrowD1Fx, aDim->m_arrowD1Fy ));
PlotDrawSegment( &draw );
draw.SetStart( wxPoint( aDim->m_arrowD2Ox, aDim->m_arrowD2Oy ));
draw.SetEnd( wxPoint( aDim->m_arrowD2Fx, aDim->m_arrowD2Fy ));
PlotDrawSegment( &draw );
draw.SetStart( wxPoint( aDim->m_arrowG1Ox, aDim->m_arrowG1Oy ));
draw.SetEnd( wxPoint( aDim->m_arrowG1Fx, aDim->m_arrowG1Fy ));
PlotDrawSegment( &draw );
draw.SetStart( wxPoint( aDim->m_arrowG2Ox, aDim->m_arrowG2Oy ));
draw.SetEnd( wxPoint( aDim->m_arrowG2Fx, aDim->m_arrowG2Fy ));
PlotDrawSegment( &draw );
}
void BRDITEMS_PLOTTER::PlotPcbTarget( PCB_TARGET* aMire )
{
int dx1, dx2, dy1, dy2, radius;
if( (GetLayerMask( aMire->GetLayer() ) & m_layerMask) == 0 )
return;
m_plotter->SetColor( getColor( aMire->GetLayer() ) );
DRAWSEGMENT draw;
draw.SetShape( S_CIRCLE );
draw.SetWidth( ( GetMode() == LINE ) ? -1 : aMire->GetWidth() );
draw.SetLayer( aMire->GetLayer() );
draw.SetStart( aMire->GetPosition() );
radius = aMire->GetSize() / 3;
if( aMire->GetShape() ) // shape X
radius = aMire->GetSize() / 2;
// Draw the circle
draw.SetEnd( wxPoint( draw.GetStart().x + radius, draw.GetStart().y ));
PlotDrawSegment( &draw );
draw.SetShape( S_SEGMENT );
radius = aMire->GetSize() / 2;
dx1 = radius;
dy1 = 0;
dx2 = 0;
dy2 = radius;
if( aMire->GetShape() ) // Shape X
{
dx1 = dy1 = radius;
dx2 = dx1;
dy2 = -dy1;
}
wxPoint mirePos( aMire->GetPosition() );
// Draw the X or + shape:
draw.SetStart( wxPoint( mirePos.x - dx1, mirePos.y - dy1 ));
draw.SetEnd( wxPoint( mirePos.x + dx1, mirePos.y + dy1 ));
PlotDrawSegment( &draw );
draw.SetStart( wxPoint( mirePos.x - dx2, mirePos.y - dy2 ));
draw.SetEnd( wxPoint( mirePos.x + dx2, mirePos.y + dy2 ));
PlotDrawSegment( &draw );
}
// Plot footprints graphic items (outlines)
void BRDITEMS_PLOTTER::Plot_Edges_Modules()
{
for( MODULE* module = m_board->m_Modules; module; module = module->Next() )
{
for( EDGE_MODULE* edge = (EDGE_MODULE*) module->m_Drawings.GetFirst();
edge; edge = edge->Next() )
{
if( edge->Type() != PCB_MODULE_EDGE_T )
continue;
if( ( GetLayerMask( edge->GetLayer() ) & m_layerMask ) == 0 )
continue;
Plot_1_EdgeModule( edge );
}
}
}
//* Plot a graphic item (outline) relative to a footprint
void BRDITEMS_PLOTTER::Plot_1_EdgeModule( EDGE_MODULE* aEdge )
{
int type_trace; // Type of item to plot.
int thickness; // Segment thickness.
int radius; // Circle radius.
if( aEdge->Type() != PCB_MODULE_EDGE_T )
return;
m_plotter->SetColor( getColor( aEdge->GetLayer() ) );
type_trace = aEdge->GetShape();
thickness = aEdge->GetWidth();
wxPoint pos( aEdge->GetStart() );
wxPoint end( aEdge->GetEnd() );
switch( type_trace )
{
case S_SEGMENT:
m_plotter->ThickSegment( pos, end, thickness, GetMode() );
break;
case S_CIRCLE:
radius = (int) hypot( (double) ( end.x - pos.x ),
(double) ( end.y - pos.y ) );
m_plotter->ThickCircle( pos, radius * 2, thickness, GetMode() );
break;
case S_ARC:
{
radius = (int) hypot( (double) ( end.x - pos.x ),
(double) ( end.y - pos.y ) );
double startAngle = ArcTangente( end.y - pos.y, end.x - pos.x );
double endAngle = startAngle + aEdge->GetAngle();
if ( ( GetFormat() == PLOT_FORMAT_DXF ) &&
( m_layerMask & ( SILKSCREEN_LAYER_BACK | DRAW_LAYER | COMMENT_LAYER ) ) )
m_plotter->ThickArc( pos, -startAngle, -endAngle, radius,
thickness, GetMode() );
else
m_plotter->ThickArc( pos, -endAngle, -startAngle, radius,
thickness, GetMode() );
}
break;
case S_POLYGON:
{
const std::vector<wxPoint>& polyPoints = aEdge->GetPolyPoints();
if( polyPoints.size() <= 1 ) // Malformed polygon
break;
// We must compute true coordinates from m_PolyList
// which are relative to module position, orientation 0
MODULE* module = aEdge->GetParentModule();
std::vector< wxPoint > cornerList;
cornerList.reserve( polyPoints.size() );
for( unsigned ii = 0; ii < polyPoints.size(); ii++ )
{
wxPoint corner = polyPoints[ii];
if( module )
{
RotatePoint( &corner, module->GetOrientation() );
corner += module->GetPosition();
}
cornerList.push_back( corner );
}
m_plotter->PlotPoly( cornerList, FILLED_SHAPE, thickness );
}
break;
}
}
// Plot a PCB Text, i;e. a text found on a copper or technical layer
void BRDITEMS_PLOTTER::PlotTextePcb( TEXTE_PCB* pt_texte )
{
int orient, thickness;
wxPoint pos;
wxSize size;
if( pt_texte->m_Text.IsEmpty() )
return;
if( ( GetLayerMask( pt_texte->GetLayer() ) & m_layerMask ) == 0 )
return;
m_plotter->SetColor( getColor( pt_texte->GetLayer() ) );
size = pt_texte->m_Size;
pos = pt_texte->m_Pos;
orient = pt_texte->m_Orient;
thickness = ( GetMode() == LINE ) ? -1 : pt_texte->m_Thickness;
if( pt_texte->m_Mirror )
size.x = -size.x;
// Non bold texts thickness is clamped at 1/6 char size by the low level draw function.
// but in Pcbnew we do not manage bold texts and thickness up to 1/4 char size
// (like bold text) and we manage the thickness.
// So we set bold flag to true
bool allow_bold = pt_texte->m_Bold || thickness;
if( pt_texte->m_MultilineAllowed )
{
wxArrayString* list = wxStringSplit( pt_texte->m_Text, '\n' );
wxPoint offset;
offset.y = pt_texte->GetInterline();
RotatePoint( &offset, orient );
for( unsigned i = 0; i < list->Count(); i++ )
{
wxString txt = list->Item( i );
m_plotter->Text( pos, UNSPECIFIED_COLOR, txt, orient, size,
pt_texte->m_HJustify, pt_texte->m_VJustify,
thickness, pt_texte->m_Italic, allow_bold );
pos += offset;
}
delete list;
}
else
{
m_plotter->Text( pos, UNSPECIFIED_COLOR, pt_texte->m_Text, orient, size,
pt_texte->m_HJustify, pt_texte->m_VJustify,
thickness, pt_texte->m_Italic, allow_bold );
}
}
/* Plot areas (given by .m_FilledPolysList member) in a zone
*/
void BRDITEMS_PLOTTER::PlotFilledAreas( ZONE_CONTAINER* aZone )
{
std::vector<CPolyPt> polysList = aZone->GetFilledPolysList();
unsigned imax = polysList.size();
if( imax == 0 ) // Nothing to draw
return;
// We need a buffer to store corners coordinates:
static std::vector< wxPoint > cornerList;
cornerList.clear();
m_plotter->SetColor( getColor( aZone->GetLayer() ) );
/* Plot all filled areas: filled areas have a filled area and a thick
* outline we must plot the filled area itself ( as a filled polygon
* OR a set of segments ) and plot the thick outline itself
*
* in non filled mode the outline is plotted, but not the filling items
*/
for( unsigned ic = 0; ic < imax; ic++ )
{
CPolyPt* corner = &polysList[ic];
cornerList.push_back( wxPoint( corner->x, corner->y) );
if( corner->end_contour ) // Plot the current filled area outline
{
// First, close the outline
if( cornerList[0] != cornerList[cornerList.size() - 1] )
{
cornerList.push_back( cornerList[0] );
}
// Plot the current filled area and its outline
if( GetMode() == FILLED )
{
// Plot the current filled area polygon
if( aZone->m_FillMode == 0 ) // We are using solid polygons
{ // (if != 0: using segments )
m_plotter->PlotPoly( cornerList, FILLED_SHAPE );
}
else // We are using areas filled by
{ // segments: plot them )
for( unsigned iseg = 0; iseg < aZone->m_FillSegmList.size(); iseg++ )
{
wxPoint start = aZone->m_FillSegmList[iseg].m_Start;
wxPoint end = aZone->m_FillSegmList[iseg].m_End;
m_plotter->ThickSegment( start, end,
aZone->m_ZoneMinThickness,
GetMode() );
}
}
// Plot the current filled area outline
if( aZone->m_ZoneMinThickness > 0 )
m_plotter->PlotPoly( cornerList, NO_FILL, aZone->m_ZoneMinThickness );
}
else
{
if( aZone->m_ZoneMinThickness > 0 )
{
for( unsigned jj = 1; jj<cornerList.size(); jj++ )
m_plotter->ThickSegment( cornerList[jj -1], cornerList[jj],
( GetMode() == LINE ) ? -1 : aZone->m_ZoneMinThickness,
GetMode() );
}
m_plotter->SetCurrentLineWidth( -1 );
}
cornerList.clear();
}
}
}
/* Plot items type DRAWSEGMENT on layers allowed by aLayerMask
*/
void BRDITEMS_PLOTTER::PlotDrawSegment( DRAWSEGMENT* aSeg )
{
int thickness;
int radius = 0, StAngle = 0, EndAngle = 0;
if( (GetLayerMask( aSeg->GetLayer() ) & m_layerMask) == 0 )
return;
if( GetMode() == LINE )
thickness = GetLineWidth();
else
thickness = aSeg->GetWidth();
m_plotter->SetColor( getColor( aSeg->GetLayer() ) );
wxPoint start( aSeg->GetStart() );
wxPoint end( aSeg->GetEnd() );
m_plotter->SetCurrentLineWidth( thickness );
switch( aSeg->GetShape() )
{
case S_CIRCLE:
radius = (int) hypot( (double) ( end.x - start.x ),
(double) ( end.y - start.y ) );
m_plotter->ThickCircle( start, radius * 2, thickness, GetMode() );
break;
case S_ARC:
radius = (int) hypot( (double) ( end.x - start.x ),
(double) ( end.y - start.y ) );
StAngle = ArcTangente( end.y - start.y, end.x - start.x );
EndAngle = StAngle + aSeg->GetAngle();
m_plotter->ThickArc( start, -EndAngle, -StAngle, radius, thickness, GetMode() );
break;
case S_CURVE:
{
const std::vector<wxPoint>& bezierPoints = aSeg->GetBezierPoints();
for( unsigned i = 1; i < bezierPoints.size(); i++ )
m_plotter->ThickSegment( bezierPoints[i - 1],
bezierPoints[i],
thickness, GetMode() );
}
break;
default:
m_plotter->ThickSegment( start, end, thickness, GetMode() );
}
}
void PlotOneBoardLayer( BOARD *aBoard, PLOTTER* aPlotter, int aLayer, void PlotOneBoardLayer( BOARD *aBoard, PLOTTER* aPlotter, int aLayer,
const PCB_PLOT_PARAMS& aPlotOpt ) const PCB_PLOT_PARAMS& aPlotOpt )
{ {
...@@ -1002,102 +477,21 @@ void PlotStandardLayer( BOARD *aBoard, PLOTTER* aPlotter, ...@@ -1002,102 +477,21 @@ void PlotStandardLayer( BOARD *aBoard, PLOTTER* aPlotter,
itemplotter.PlotDrillMarks(); itemplotter.PlotDrillMarks();
} }
/** Helper function to plot a single drill mark. It compensate and clamp
* the drill mark size depending on the current plot options
*/
void BRDITEMS_PLOTTER::plotOneDrillMark( PAD_SHAPE_T aDrillShape,
const wxPoint &aDrillPos, wxSize aDrillSize,
const wxSize &aPadSize,
double aOrientation, int aSmallDrill )
{
// Small drill marks have no significance when applied to slots
if( aSmallDrill && aDrillShape == PAD_ROUND )
aDrillSize.x = std::min( aSmallDrill, aDrillSize.x );
// Round holes only have x diameter, slots have both
aDrillSize.x -= getFineWidthAdj();
aDrillSize.x = Clamp( 1, aDrillSize.x, aPadSize.x - 1 );
if( aDrillShape == PAD_OVAL )
{
aDrillSize.y -= getFineWidthAdj();
aDrillSize.y = Clamp( 1, aDrillSize.y, aPadSize.y - 1 );
m_plotter->FlashPadOval( aDrillPos, aDrillSize, aOrientation, GetMode() );
}
else
m_plotter->FlashPadCircle( aDrillPos, aDrillSize.x, GetMode() );
}
/* Function PlotDrillMarks
* Draw a drill mark for pads and vias.
* Must be called after all drawings, because it
* redraw the drill mark on a pad or via, as a negative (i.e. white) shape in
* FILLED plot mode (for PS and PDF outputs)
*/
void BRDITEMS_PLOTTER::PlotDrillMarks()
{
/* If small drills marks were requested prepare a clamp value to pass
to the helper function */
int small_drill = (GetDrillMarksType() == PCB_PLOT_PARAMS::SMALL_DRILL_SHAPE) ?
SMALL_DRILL : 0;
/* In the filled trace mode drill marks are drawn white-on-black to scrape
the underlying pad. This works only for drivers supporting color change,
obviously... it means that:
- PS, SVG and PDF output is correct (i.e. you have a 'donut' pad)
- In HPGL you can't see them
- In gerbers you can't see them, too. This is arguably the right thing to
do since having drill marks and high speed drill stations is a sure
recipe for broken tools and angry manufacturers. If you *really* want them
you could start a layer with negative polarity to scrape the film.
- In DXF they go into the 'WHITE' layer. This could be useful.
*/
if( GetMode() == FILLED )
m_plotter->SetColor( WHITE );
for( TRACK *pts = m_board->m_Track; pts != NULL; pts = pts->Next() )
{
if( pts->Type() != PCB_VIA_T )
continue;
plotOneDrillMark(PAD_CIRCLE,
pts->m_Start, wxSize( pts->GetDrillValue(), 0 ),
wxSize( pts->m_Width, 0 ), 0, small_drill );
}
for( MODULE *Module = m_board->m_Modules; Module != NULL; Module = Module->Next() )
{
for( D_PAD *pad = Module->m_Pads; pad != NULL; pad = pad->Next() )
{
if( pad->GetDrillSize().x == 0 )
continue;
plotOneDrillMark( pad->GetDrillShape(),
pad->GetPosition(), pad->GetDrillSize(),
pad->GetSize(), pad->GetOrientation(),
small_drill );
}
}
if( GetMode() == FILLED )
m_plotter->SetColor( GetColor() );
}
/** Set up most plot options for plotting a board (especially the viewport) /** Set up most plot options for plotting a board (especially the viewport)
* Important thing: * Important thing:
* page size is the 'drawing' page size, * page size is the 'drawing' page size,
* paper size is the physical page size * paper size is the physical page size
*/ */
static void PlotSetupPlotter( PLOTTER *aPlotter, PCB_PLOT_PARAMS *aPlotOpts, static void initializePlotter( PLOTTER *aPlotter, BOARD * aBoard,
const PAGE_INFO &aPageInfo, PCB_PLOT_PARAMS *aPlotOpts )
const EDA_RECT &aBbbox,
const wxPoint &aOrigin,
const wxString &aFilename )
{ {
PAGE_INFO pageA4( wxT( "A4" ) ); PAGE_INFO pageA4( wxT( "A4" ) );
const PAGE_INFO& pageInfo = aBoard->GetPageSettings();
const PAGE_INFO* sheet_info; const PAGE_INFO* sheet_info;
double paperscale; // Page-to-paper ratio double paperscale; // Page-to-paper ratio
wxSize paperSizeIU; wxSize paperSizeIU;
wxSize pageSizeIU( aPageInfo.GetSizeIU() ); wxSize pageSizeIU( pageInfo.GetSizeIU() );
bool autocenter = false; bool autocenter = false;
/* Special options: to fit the sheet to an A4 sheet replace /* Special options: to fit the sheet to an A4 sheet replace
...@@ -1116,7 +510,7 @@ static void PlotSetupPlotter( PLOTTER *aPlotter, PCB_PLOT_PARAMS *aPlotOpts, ...@@ -1116,7 +510,7 @@ static void PlotSetupPlotter( PLOTTER *aPlotter, PCB_PLOT_PARAMS *aPlotOpts,
} }
else else
{ {
sheet_info = &aPageInfo; sheet_info = &pageInfo;
paperSizeIU = pageSizeIU; paperSizeIU = pageSizeIU;
paperscale = 1; paperscale = 1;
...@@ -1124,10 +518,11 @@ static void PlotSetupPlotter( PLOTTER *aPlotter, PCB_PLOT_PARAMS *aPlotOpts, ...@@ -1124,10 +518,11 @@ static void PlotSetupPlotter( PLOTTER *aPlotter, PCB_PLOT_PARAMS *aPlotOpts,
autocenter = (aPlotOpts->GetScale() != 1.0); autocenter = (aPlotOpts->GetScale() != 1.0);
} }
wxPoint boardCenter = aBbbox.Centre(); EDA_RECT bbox = aBoard->ComputeBoundingBox();
wxPoint boardCenter = bbox.Centre();
wxSize boardSize = bbox.GetSize();
double compound_scale; double compound_scale;
wxSize boardSize = aBbbox.GetSize();
/* Fit to 80% of the page if asked; it could be that the board is empty, /* Fit to 80% of the page if asked; it could be that the board is empty,
* in this case regress to 1:1 scale */ * in this case regress to 1:1 scale */
...@@ -1155,7 +550,7 @@ static void PlotSetupPlotter( PLOTTER *aPlotter, PCB_PLOT_PARAMS *aPlotOpts, ...@@ -1155,7 +550,7 @@ static void PlotSetupPlotter( PLOTTER *aPlotter, PCB_PLOT_PARAMS *aPlotOpts,
else else
{ {
if( aPlotOpts->GetUseAuxOrigin() ) if( aPlotOpts->GetUseAuxOrigin() )
offset = aOrigin; offset = aBoard->GetOriginAxisPosition();
} }
/* Configure the plotter object with all the stuff computed and /* Configure the plotter object with all the stuff computed and
...@@ -1167,7 +562,6 @@ static void PlotSetupPlotter( PLOTTER *aPlotter, PCB_PLOT_PARAMS *aPlotOpts, ...@@ -1167,7 +562,6 @@ static void PlotSetupPlotter( PLOTTER *aPlotter, PCB_PLOT_PARAMS *aPlotOpts,
aPlotter->SetDefaultLineWidth( aPlotOpts->GetLineWidth() ); aPlotter->SetDefaultLineWidth( aPlotOpts->GetLineWidth() );
aPlotter->SetCreator( wxT( "PCBNEW" ) ); aPlotter->SetCreator( wxT( "PCBNEW" ) );
aPlotter->SetColorMode( false ); // default is plot in Black and White. aPlotter->SetColorMode( false ); // default is plot in Black and White.
aPlotter->SetFilename( aFilename );
aPlotter->SetTextMode( aPlotOpts->GetTextMode() ); aPlotter->SetTextMode( aPlotOpts->GetTextMode() );
} }
...@@ -1221,7 +615,6 @@ PLOTTER *StartPlotBoard( BOARD *aBoard, PCB_PLOT_PARAMS *aPlotOpts, ...@@ -1221,7 +615,6 @@ PLOTTER *StartPlotBoard( BOARD *aBoard, PCB_PLOT_PARAMS *aPlotOpts,
const wxString& aFullFileName, const wxString& aFullFileName,
const wxString& aSheetDesc ) const wxString& aSheetDesc )
{ {
const PAGE_INFO& pageInfo = aBoard->GetPageSettings();
FILE* output_file = wxFopen( aFullFileName, wxT( "wt" ) ); FILE* output_file = wxFopen( aFullFileName, wxT( "wt" ) );
if( output_file == NULL ) if( output_file == NULL )
...@@ -1272,21 +665,13 @@ PLOTTER *StartPlotBoard( BOARD *aBoard, PCB_PLOT_PARAMS *aPlotOpts, ...@@ -1272,21 +665,13 @@ PLOTTER *StartPlotBoard( BOARD *aBoard, PCB_PLOT_PARAMS *aPlotOpts,
if( the_plotter ) if( the_plotter )
{ {
EDA_RECT bbbox = aBoard->ComputeBoundingBox(); the_plotter->SetFilename( aFullFileName );
wxPoint auxOrigin( aBoard->GetOriginAxisPosition() );
// Compute the viewport and set the other options // Compute the viewport and set the other options
PlotSetupPlotter( the_plotter, aPlotOpts, pageInfo, bbbox, auxOrigin, initializePlotter( the_plotter, aBoard, aPlotOpts );
aFullFileName );
if( the_plotter->StartPlot( output_file ) ) if( the_plotter->StartPlot( output_file ) )
{ {
/* When plotting a negative board: draw a black rectangle
* (background for plot board in white) and switch the current
* color to WHITE; note the color inversion is actually done
* in the driver (if supported) */
if( aPlotOpts->GetNegative() )
FillNegativeKnockout( the_plotter, bbbox );
// Plot the frame reference if requested // Plot the frame reference if requested
if( aPlotOpts->GetPlotFrameRef() ) if( aPlotOpts->GetPlotFrameRef() )
PlotWorkSheet( the_plotter, aBoard->GetTitleBlock(), PlotWorkSheet( the_plotter, aBoard->GetTitleBlock(),
...@@ -1294,6 +679,16 @@ PLOTTER *StartPlotBoard( BOARD *aBoard, PCB_PLOT_PARAMS *aPlotOpts, ...@@ -1294,6 +679,16 @@ PLOTTER *StartPlotBoard( BOARD *aBoard, PCB_PLOT_PARAMS *aPlotOpts,
1, 1, // Only one page 1, 1, // Only one page
aSheetDesc, aBoard->GetFileName() ); aSheetDesc, aBoard->GetFileName() );
/* When plotting a negative board: draw a black rectangle
* (background for plot board in white) and switch the current
* color to WHITE; note the color inversion is actually done
* in the driver (if supported) */
if( aPlotOpts->GetNegative() )
{
EDA_RECT bbox = aBoard->ComputeBoundingBox();
FillNegativeKnockout( the_plotter, bbox );
}
return the_plotter; return the_plotter;
} }
} }
......
pcbnew/plot_brditems_plotter.cpp 0 → 100644
View file @ 2d49ced7
/**
* @file plot_brditems_plotter.cpp
* @brief basic plot functions to plot board items, or a group of board items.
*/
/*
* This program source code file is part of KiCad, a free EDA CAD application.
*
* Copyright (C) 1992-2012 KiCad Developers, see AUTHORS.txt for contributors.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, you may find one here:
* http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
* or you may search the http://www.gnu.org website for the version 2 license,
* or you may write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
*/
#include <fctsys.h>
#include <common.h>
#include <plot_common.h>
#include <base_struct.h>
#include <drawtxt.h>
#include <trigo.h>
#include <wxBasePcbFrame.h>
#include <pcbcommon.h>
#include <class_board.h>
#include <class_module.h>
#include <class_track.h>
#include <class_edge_mod.h>
#include <class_pcb_text.h>
#include <class_zone.h>
#include <class_drawsegment.h>
#include <class_mire.h>
#include <class_dimension.h>
#include <pcbnew.h>
#include <pcbplot.h>
/* class BRDITEMS_PLOTTER is a helper class to plot board items
* and a group of board items
*/
/* Function getColor
* return the layer colorfrom the layer id
* White color is special: cannot be seen on a white paper
* and in B&W mode, is plotted as white but other colors are plotted in BLACK
* so the returned color is LIGHTGRAY when the layer color is WHITE
*/
EDA_COLOR_T BRDITEMS_PLOTTER::getColor( int aLayer )
{
EDA_COLOR_T color = m_board->GetLayerColor( aLayer );
if (color == WHITE)
color = LIGHTGRAY;
return color;
}
bool BRDITEMS_PLOTTER::PlotAllTextsModule( MODULE* aModule )
{
// see if we want to plot VALUE and REF fields
bool trace_val = GetPlotValue();
bool trace_ref = GetPlotReference();
TEXTE_MODULE* textModule = aModule->m_Reference;
unsigned textLayer = textModule->GetLayer();
if( textLayer >= 32 )
return false;
if( ( ( 1 << textLayer ) & m_layerMask ) == 0 )
trace_ref = false;
if( !textModule->IsVisible() && !GetPlotInvisibleText() )
trace_ref = false;
textModule = aModule->m_Value;
textLayer = textModule->GetLayer();
if( textLayer > 32 )
return false;
if( ( (1 << textLayer) & m_layerMask ) == 0 )
trace_val = false;
if( !textModule->IsVisible() && !GetPlotInvisibleText() )
trace_val = false;
// Plot text fields, if allowed
if( trace_ref )
{
if( GetReferenceColor() == UNSPECIFIED_COLOR )
PlotTextModule( aModule->m_Reference, getColor( textLayer ) );
else
PlotTextModule( aModule->m_Reference, GetReferenceColor() );
}
if( trace_val )
{
if( GetValueColor() == UNSPECIFIED_COLOR )
PlotTextModule( aModule->m_Value, getColor( textLayer ) );
else
PlotTextModule( aModule->m_Value, GetValueColor() );
}
for( textModule = (TEXTE_MODULE*) aModule->m_Drawings.GetFirst();
textModule != NULL; textModule = textModule->Next() )
{
if( textModule->Type() != PCB_MODULE_TEXT_T )
continue;
if( !GetPlotOtherText() )
continue;
if( !textModule->IsVisible() && !GetPlotInvisibleText() )
continue;
textLayer = textModule->GetLayer();
if( textLayer >= 32 )
return false;
if( !( ( 1 << textLayer ) & m_layerMask ) )
continue;
PlotTextModule( textModule, getColor( textLayer ) );
}
return true;
}
// plot items like text and graphics, but not tracks and module
void BRDITEMS_PLOTTER::PlotBoardGraphicItems()
{
for( BOARD_ITEM* item = m_board->m_Drawings; item; item = item->Next() )
{
switch( item->Type() )
{
case PCB_LINE_T:
PlotDrawSegment( (DRAWSEGMENT*) item);
break;
case PCB_TEXT_T:
PlotTextePcb( (TEXTE_PCB*) item );
break;
case PCB_DIMENSION_T:
PlotDimension( (DIMENSION*) item );
break;
case PCB_TARGET_T:
PlotPcbTarget( (PCB_TARGET*) item );
break;
case PCB_MARKER_T:
default:
break;
}
}
}
void BRDITEMS_PLOTTER::PlotTextModule( TEXTE_MODULE* pt_texte,
EDA_COLOR_T aColor )
{
wxSize size;
wxPoint pos;
int orient, thickness;
if( aColor == WHITE )
aColor = LIGHTGRAY;
m_plotter->SetColor( aColor );
// calculate some text parameters :
size = pt_texte->m_Size;
pos = pt_texte->m_Pos;
orient = pt_texte->GetDrawRotation();
thickness = pt_texte->m_Thickness;
if( GetMode() == LINE )
thickness = -1;
if( pt_texte->m_Mirror )
NEGATE( size.x ); // Text is mirrored
// Non bold texts thickness is clamped at 1/6 char size by the low level draw function.
// but in Pcbnew we do not manage bold texts and thickness up to 1/4 char size
// (like bold text) and we manage the thickness.
// So we set bold flag to true
bool allow_bold = pt_texte->m_Bold || thickness;
m_plotter->Text( pos, aColor,
pt_texte->m_Text,
orient, size,
pt_texte->m_HJustify, pt_texte->m_VJustify,
thickness, pt_texte->m_Italic, allow_bold );
}
void BRDITEMS_PLOTTER::PlotDimension( DIMENSION* aDim )
{
if( (GetLayerMask( aDim->GetLayer() ) & m_layerMask) == 0 )
return;
DRAWSEGMENT draw;
draw.SetWidth( (GetMode() == LINE) ? -1 : aDim->GetWidth() );
draw.SetLayer( aDim->GetLayer() );
EDA_COLOR_T color = aDim->GetBoard()->GetLayerColor( aDim->GetLayer() );
// Set plot color (change WHITE to LIGHTGRAY because
// the white items are not seen on a white paper or screen
m_plotter->SetColor( color != WHITE ? color : LIGHTGRAY);
PlotTextePcb( &aDim->m_Text );
draw.SetStart( wxPoint( aDim->m_crossBarOx, aDim->m_crossBarOy ));
draw.SetEnd( wxPoint( aDim->m_crossBarFx, aDim->m_crossBarFy ));
PlotDrawSegment( &draw );
draw.SetStart( wxPoint( aDim->m_featureLineGOx, aDim->m_featureLineGOy ));
draw.SetEnd( wxPoint( aDim->m_featureLineGFx, aDim->m_featureLineGFy ));
PlotDrawSegment( &draw );
draw.SetStart( wxPoint( aDim->m_featureLineDOx, aDim->m_featureLineDOy ));
draw.SetEnd( wxPoint( aDim->m_featureLineDFx, aDim->m_featureLineDFy ));
PlotDrawSegment( &draw );
draw.SetStart( wxPoint( aDim->m_arrowD1Ox, aDim->m_arrowD1Oy ));
draw.SetEnd( wxPoint( aDim->m_arrowD1Fx, aDim->m_arrowD1Fy ));
PlotDrawSegment( &draw );
draw.SetStart( wxPoint( aDim->m_arrowD2Ox, aDim->m_arrowD2Oy ));
draw.SetEnd( wxPoint( aDim->m_arrowD2Fx, aDim->m_arrowD2Fy ));
PlotDrawSegment( &draw );
draw.SetStart( wxPoint( aDim->m_arrowG1Ox, aDim->m_arrowG1Oy ));
draw.SetEnd( wxPoint( aDim->m_arrowG1Fx, aDim->m_arrowG1Fy ));
PlotDrawSegment( &draw );
draw.SetStart( wxPoint( aDim->m_arrowG2Ox, aDim->m_arrowG2Oy ));
draw.SetEnd( wxPoint( aDim->m_arrowG2Fx, aDim->m_arrowG2Fy ));
PlotDrawSegment( &draw );
}
void BRDITEMS_PLOTTER::PlotPcbTarget( PCB_TARGET* aMire )
{
int dx1, dx2, dy1, dy2, radius;
if( (GetLayerMask( aMire->GetLayer() ) & m_layerMask) == 0 )
return;
m_plotter->SetColor( getColor( aMire->GetLayer() ) );
DRAWSEGMENT draw;
draw.SetShape( S_CIRCLE );
draw.SetWidth( ( GetMode() == LINE ) ? -1 : aMire->GetWidth() );
draw.SetLayer( aMire->GetLayer() );
draw.SetStart( aMire->GetPosition() );
radius = aMire->GetSize() / 3;
if( aMire->GetShape() ) // shape X
radius = aMire->GetSize() / 2;
// Draw the circle
draw.SetEnd( wxPoint( draw.GetStart().x + radius, draw.GetStart().y ));
PlotDrawSegment( &draw );
draw.SetShape( S_SEGMENT );
radius = aMire->GetSize() / 2;
dx1 = radius;
dy1 = 0;
dx2 = 0;
dy2 = radius;
if( aMire->GetShape() ) // Shape X
{
dx1 = dy1 = radius;
dx2 = dx1;
dy2 = -dy1;
}
wxPoint mirePos( aMire->GetPosition() );
// Draw the X or + shape:
draw.SetStart( wxPoint( mirePos.x - dx1, mirePos.y - dy1 ));
draw.SetEnd( wxPoint( mirePos.x + dx1, mirePos.y + dy1 ));
PlotDrawSegment( &draw );
draw.SetStart( wxPoint( mirePos.x - dx2, mirePos.y - dy2 ));
draw.SetEnd( wxPoint( mirePos.x + dx2, mirePos.y + dy2 ));
PlotDrawSegment( &draw );
}
// Plot footprints graphic items (outlines)
void BRDITEMS_PLOTTER::Plot_Edges_Modules()
{
for( MODULE* module = m_board->m_Modules; module; module = module->Next() )
{
for( EDGE_MODULE* edge = (EDGE_MODULE*) module->m_Drawings.GetFirst();
edge; edge = edge->Next() )
{
if( edge->Type() != PCB_MODULE_EDGE_T )
continue;
if( ( GetLayerMask( edge->GetLayer() ) & m_layerMask ) == 0 )
continue;
Plot_1_EdgeModule( edge );
}
}
}
//* Plot a graphic item (outline) relative to a footprint
void BRDITEMS_PLOTTER::Plot_1_EdgeModule( EDGE_MODULE* aEdge )
{
int type_trace; // Type of item to plot.
int thickness; // Segment thickness.
int radius; // Circle radius.
if( aEdge->Type() != PCB_MODULE_EDGE_T )
return;
m_plotter->SetColor( getColor( aEdge->GetLayer() ) );
type_trace = aEdge->GetShape();
thickness = aEdge->GetWidth();
wxPoint pos( aEdge->GetStart() );
wxPoint end( aEdge->GetEnd() );
switch( type_trace )
{
case S_SEGMENT:
m_plotter->ThickSegment( pos, end, thickness, GetMode() );
break;
case S_CIRCLE:
radius = (int) hypot( (double) ( end.x - pos.x ),
(double) ( end.y - pos.y ) );
m_plotter->ThickCircle( pos, radius * 2, thickness, GetMode() );
break;
case S_ARC:
{
radius = (int) hypot( (double) ( end.x - pos.x ),
(double) ( end.y - pos.y ) );
double startAngle = ArcTangente( end.y - pos.y, end.x - pos.x );
double endAngle = startAngle + aEdge->GetAngle();
if ( ( GetFormat() == PLOT_FORMAT_DXF ) &&
( m_layerMask & ( SILKSCREEN_LAYER_BACK | DRAW_LAYER | COMMENT_LAYER ) ) )
m_plotter->ThickArc( pos, -startAngle, -endAngle, radius,
thickness, GetMode() );
else
m_plotter->ThickArc( pos, -endAngle, -startAngle, radius,
thickness, GetMode() );
}
break;
case S_POLYGON:
{
const std::vector<wxPoint>& polyPoints = aEdge->GetPolyPoints();
if( polyPoints.size() <= 1 ) // Malformed polygon
break;
// We must compute true coordinates from m_PolyList
// which are relative to module position, orientation 0
MODULE* module = aEdge->GetParentModule();
std::vector< wxPoint > cornerList;
cornerList.reserve( polyPoints.size() );
for( unsigned ii = 0; ii < polyPoints.size(); ii++ )
{
wxPoint corner = polyPoints[ii];
if( module )
{
RotatePoint( &corner, module->GetOrientation() );
corner += module->GetPosition();
}
cornerList.push_back( corner );
}
m_plotter->PlotPoly( cornerList, FILLED_SHAPE, thickness );
}
break;
}
}
// Plot a PCB Text, i;e. a text found on a copper or technical layer
void BRDITEMS_PLOTTER::PlotTextePcb( TEXTE_PCB* pt_texte )
{
int orient, thickness;
wxPoint pos;
wxSize size;
if( pt_texte->m_Text.IsEmpty() )
return;
if( ( GetLayerMask( pt_texte->GetLayer() ) & m_layerMask ) == 0 )
return;
m_plotter->SetColor( getColor( pt_texte->GetLayer() ) );
size = pt_texte->m_Size;
pos = pt_texte->m_Pos;
orient = pt_texte->m_Orient;
thickness = ( GetMode() == LINE ) ? -1 : pt_texte->m_Thickness;
if( pt_texte->m_Mirror )
size.x = -size.x;
// Non bold texts thickness is clamped at 1/6 char size by the low level draw function.
// but in Pcbnew we do not manage bold texts and thickness up to 1/4 char size
// (like bold text) and we manage the thickness.
// So we set bold flag to true
bool allow_bold = pt_texte->m_Bold || thickness;
if( pt_texte->m_MultilineAllowed )
{
wxArrayString* list = wxStringSplit( pt_texte->m_Text, '\n' );
wxPoint offset;
offset.y = pt_texte->GetInterline();
RotatePoint( &offset, orient );
for( unsigned i = 0; i < list->Count(); i++ )
{
wxString txt = list->Item( i );
m_plotter->Text( pos, UNSPECIFIED_COLOR, txt, orient, size,
pt_texte->m_HJustify, pt_texte->m_VJustify,
thickness, pt_texte->m_Italic, allow_bold );
pos += offset;
}
delete list;
}
else
{
m_plotter->Text( pos, UNSPECIFIED_COLOR, pt_texte->m_Text, orient, size,
pt_texte->m_HJustify, pt_texte->m_VJustify,
thickness, pt_texte->m_Italic, allow_bold );
}
}
/* Plot areas (given by .m_FilledPolysList member) in a zone
*/
void BRDITEMS_PLOTTER::PlotFilledAreas( ZONE_CONTAINER* aZone )
{
std::vector<CPolyPt> polysList = aZone->GetFilledPolysList();
unsigned imax = polysList.size();
if( imax == 0 ) // Nothing to draw
return;
// We need a buffer to store corners coordinates:
static std::vector< wxPoint > cornerList;
cornerList.clear();
m_plotter->SetColor( getColor( aZone->GetLayer() ) );
/* Plot all filled areas: filled areas have a filled area and a thick
* outline we must plot the filled area itself ( as a filled polygon
* OR a set of segments ) and plot the thick outline itself
*
* in non filled mode the outline is plotted, but not the filling items
*/
for( unsigned ic = 0; ic < imax; ic++ )
{
CPolyPt* corner = &polysList[ic];
cornerList.push_back( wxPoint( corner->x, corner->y) );
if( corner->end_contour ) // Plot the current filled area outline
{
// First, close the outline
if( cornerList[0] != cornerList[cornerList.size() - 1] )
{
cornerList.push_back( cornerList[0] );
}
// Plot the current filled area and its outline
if( GetMode() == FILLED )
{
// Plot the current filled area polygon
if( aZone->m_FillMode == 0 ) // We are using solid polygons
{ // (if != 0: using segments )
m_plotter->PlotPoly( cornerList, FILLED_SHAPE );
}
else // We are using areas filled by
{ // segments: plot them )
for( unsigned iseg = 0; iseg < aZone->m_FillSegmList.size(); iseg++ )
{
wxPoint start = aZone->m_FillSegmList[iseg].m_Start;
wxPoint end = aZone->m_FillSegmList[iseg].m_End;
m_plotter->ThickSegment( start, end,
aZone->m_ZoneMinThickness,
GetMode() );
}
}
// Plot the current filled area outline
if( aZone->m_ZoneMinThickness > 0 )
m_plotter->PlotPoly( cornerList, NO_FILL, aZone->m_ZoneMinThickness );
}
else
{
if( aZone->m_ZoneMinThickness > 0 )
{
for( unsigned jj = 1; jj<cornerList.size(); jj++ )
m_plotter->ThickSegment( cornerList[jj -1], cornerList[jj],
( GetMode() == LINE ) ? -1 : aZone->m_ZoneMinThickness,
GetMode() );
}
m_plotter->SetCurrentLineWidth( -1 );
}
cornerList.clear();
}
}
}
/* Plot items type DRAWSEGMENT on layers allowed by aLayerMask
*/
void BRDITEMS_PLOTTER::PlotDrawSegment( DRAWSEGMENT* aSeg )
{
int thickness;
int radius = 0, StAngle = 0, EndAngle = 0;
if( (GetLayerMask( aSeg->GetLayer() ) & m_layerMask) == 0 )
return;
if( GetMode() == LINE )
thickness = GetLineWidth();
else
thickness = aSeg->GetWidth();
m_plotter->SetColor( getColor( aSeg->GetLayer() ) );
wxPoint start( aSeg->GetStart() );
wxPoint end( aSeg->GetEnd() );
m_plotter->SetCurrentLineWidth( thickness );
switch( aSeg->GetShape() )
{
case S_CIRCLE:
radius = (int) hypot( (double) ( end.x - start.x ),
(double) ( end.y - start.y ) );
m_plotter->ThickCircle( start, radius * 2, thickness, GetMode() );
break;
case S_ARC:
radius = (int) hypot( (double) ( end.x - start.x ),
(double) ( end.y - start.y ) );
StAngle = ArcTangente( end.y - start.y, end.x - start.x );
EndAngle = StAngle + aSeg->GetAngle();
m_plotter->ThickArc( start, -EndAngle, -StAngle, radius, thickness, GetMode() );
break;
case S_CURVE:
{
const std::vector<wxPoint>& bezierPoints = aSeg->GetBezierPoints();
for( unsigned i = 1; i < bezierPoints.size(); i++ )
m_plotter->ThickSegment( bezierPoints[i - 1],
bezierPoints[i],
thickness, GetMode() );
}
break;
default:
m_plotter->ThickSegment( start, end, thickness, GetMode() );
}
}
/** Helper function to plot a single drill mark. It compensate and clamp
* the drill mark size depending on the current plot options
*/
void BRDITEMS_PLOTTER::plotOneDrillMark( PAD_SHAPE_T aDrillShape,
const wxPoint &aDrillPos, wxSize aDrillSize,
const wxSize &aPadSize,
double aOrientation, int aSmallDrill )
{
// Small drill marks have no significance when applied to slots
if( aSmallDrill && aDrillShape == PAD_ROUND )
aDrillSize.x = std::min( aSmallDrill, aDrillSize.x );
// Round holes only have x diameter, slots have both
aDrillSize.x -= getFineWidthAdj();
aDrillSize.x = Clamp( 1, aDrillSize.x, aPadSize.x - 1 );
if( aDrillShape == PAD_OVAL )
{
aDrillSize.y -= getFineWidthAdj();
aDrillSize.y = Clamp( 1, aDrillSize.y, aPadSize.y - 1 );
m_plotter->FlashPadOval( aDrillPos, aDrillSize, aOrientation, GetMode() );
}
else
m_plotter->FlashPadCircle( aDrillPos, aDrillSize.x, GetMode() );
}
/* Function PlotDrillMarks
* Draw a drill mark for pads and vias.
* Must be called after all drawings, because it
* redraw the drill mark on a pad or via, as a negative (i.e. white) shape in
* FILLED plot mode (for PS and PDF outputs)
*/
void BRDITEMS_PLOTTER::PlotDrillMarks()
{
/* If small drills marks were requested prepare a clamp value to pass
to the helper function */
int small_drill = (GetDrillMarksType() == PCB_PLOT_PARAMS::SMALL_DRILL_SHAPE) ?
SMALL_DRILL : 0;
/* In the filled trace mode drill marks are drawn white-on-black to scrape
the underlying pad. This works only for drivers supporting color change,
obviously... it means that:
- PS, SVG and PDF output is correct (i.e. you have a 'donut' pad)
- In HPGL you can't see them
- In gerbers you can't see them, too. This is arguably the right thing to
do since having drill marks and high speed drill stations is a sure
recipe for broken tools and angry manufacturers. If you *really* want them
you could start a layer with negative polarity to scrape the film.
- In DXF they go into the 'WHITE' layer. This could be useful.
*/
if( GetMode() == FILLED )
m_plotter->SetColor( WHITE );
for( TRACK *pts = m_board->m_Track; pts != NULL; pts = pts->Next() )
{
if( pts->Type() != PCB_VIA_T )
continue;
plotOneDrillMark(PAD_CIRCLE,
pts->m_Start, wxSize( pts->GetDrillValue(), 0 ),
wxSize( pts->m_Width, 0 ), 0, small_drill );
}
for( MODULE *Module = m_board->m_Modules; Module != NULL; Module = Module->Next() )
{
for( D_PAD *pad = Module->m_Pads; pad != NULL; pad = pad->Next() )
{
if( pad->GetDrillSize().x == 0 )
continue;
plotOneDrillMark( pad->GetDrillShape(),
pad->GetPosition(), pad->GetDrillSize(),
pad->GetSize(), pad->GetOrientation(),
small_drill );
}
}
if( GetMode() == FILLED )
m_plotter->SetColor( GetColor() );
}
pcbnew/scripting/pcbnew_footprint_wizards.cpp
View file @ 2d49ced7
...@@ -141,7 +141,7 @@ wxString PYTHON_FOOTPRINT_WIZARD::GetDescription() ...@@ -141,7 +141,7 @@ wxString PYTHON_FOOTPRINT_WIZARD::GetDescription()
int PYTHON_FOOTPRINT_WIZARD::GetNumParameterPages() int PYTHON_FOOTPRINT_WIZARD::GetNumParameterPages()
{ {
int ret; int ret = 0;
PyObject *result; PyObject *result;
/* Time to call the callback */ /* Time to call the callback */
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment