pcbnew: addded zones in non copper areas and starting work to use polygons in...

pcbnew: addded zones in non copper areas and starting work to use polygons in zone fill algos in not copper areas
work in progress: see changelog

change_log.txt

@@ -5,6 +5,18 @@ Started 2007-June-11
 Please add newer entries at the top, list the date and your name with
 email address.
 
+
+2008-Sep-26 UPDATE Jean-Pierre Charras <jean-pierre.charras@inpg.fr>
+================================================================================
++pcbnew:
+    Starting work to use polygons in zone fill algos.
+    Currently, use this to add zone on non copper layers (technical layers)
+    Only for eyes.
+    Plot outputs do not handle this.
+    Problems with holes in zones.
+    Also: first used of wxFormBuilder
+
+
 2008-Sep-17 UPDATE Jean-Pierre Charras <jean-pierre.charras@inpg.fr>
 ================================================================================
 +pcbnew:

eeschema/class_pin.cpp

@@ -727,42 +727,41 @@ wxPoint LibDrawPin::ReturnPinEndPoint()
 int LibDrawPin::ReturnPinDrawOrient( int TransMat[2][2] )
 /********************************************************/
 
-/* Return the pin real orientation (PIN_UP, PIN_DOWN, PIN_RIGHT, PIN_LEFT),
- *  according to its orientation,
- *  AND the matrix transform (rot, mirror) TransMat
+/** Function ReturnPinDrawOrient
+ * Return the pin real orientation (PIN_UP, PIN_DOWN, PIN_RIGHT, PIN_LEFT),
+ *  according to its orientation and the matrix transform (rot, mirror) TransMat
+ * @param  TransMat = transform matrix
  */
 {
     int orient;
-    int x1 = 0, y1 = 0;
-    int t1, t2;
+    wxPoint end;    // position of a end pin starting at 0,0 according to its orientation, lenght = 1
 
     switch( m_Orient )
     {
     case PIN_UP:
-        y1 = 1; break;
+        end.y = 1; break;
 
     case PIN_DOWN:
-        y1 = -1; break;
+        end.y = -1; break;
 
     case PIN_LEFT:
-        x1 = -1; break;
+        end.x = -1; break;
 
     case PIN_RIGHT:
-        x1 = 1; break;
+        end.x = 1; break;
     }
 
-    t1     = TransMat[0][0] * x1 + TransMat[0][1] * y1;
-    t2     = TransMat[1][0] * x1 + TransMat[1][1] * y1;
+    end    = TransformCoordinate( TransMat, end );    // = pos of end point, accordint to the component orientation
     orient = PIN_UP;
-    if( t1 == 0 )
+    if( end.x == 0 )
     {
-        if( t2 > 0 )
+        if( end.y > 0 )
             orient = PIN_DOWN;
     }
     else
     {
         orient = PIN_RIGHT;
-        if( t1 < 0 )
+        if( end.x < 0 )
             orient = PIN_LEFT;
     }
 

pcbnew/CMakeLists.txt

@@ -51,6 +51,8 @@ set(PCBNEW_SRCS
 #   dialog_graphic_items_options.cpp
 #   dialog_initpcb.cpp
 #   dialog_netlist.cpp
+    zones_non_copper_type_functions.cpp
+    dialog_non_copper_zones_properties.cpp
 #   dialog_pad_edit.cpp
     dialog_setup_libs.cpp
     dialog_orient_footprints.cpp

pcbnew/class_board.cpp

@@ -1063,6 +1063,24 @@ void BOARD::RedrawAreasOutlines(WinEDA_DrawPanel* panel, wxDC * aDC, int aDrawMo
     }
 }
 
+/***********************************************************************************************/
+void BOARD::RedrawFilledAreas(WinEDA_DrawPanel* panel, wxDC * aDC, int aDrawMode, int aLayer)
+/***********************************************************************************************/
+/**
+ * Function RedrawFilledAreas
+ * Redraw all areas outlines on layer aLayer ( redraw all if aLayer < 0 )
+ */
+{
+    if ( ! aDC ) return;
+
+    for( int ii = 0; ii < GetAreaCount(); ii++ )
+    {
+        ZONE_CONTAINER* edge_zone = GetArea(ii);
+        if( (aLayer < 0) || (aLayer == edge_zone->GetLayer()) )
+            edge_zone->DrawFilledArea( panel, aDC, aDrawMode );
+    }
+}
+
 
 
 #if defined(DEBUG)

pcbnew/class_board.h

@@ -366,6 +366,12 @@ public:
      */
     void RedrawAreasOutlines(WinEDA_DrawPanel* panel, wxDC * aDC, int aDrawMode, int aLayer);
 
+    /**
+     * Function RedrawFilledAreas
+     * Redraw all filled areas on layer aLayer ( redraw all if aLayer < 0 )
+     */
+    void RedrawFilledAreas(WinEDA_DrawPanel* panel, wxDC * aDC, int aDrawMode, int aLayer);
+
     /**
      * Function SetAreasNetCodesFromNetNames
      * Set the .m_NetCode member of all copper areas, according to the area Net Name

pcbnew/class_board_item.cpp

@@ -149,7 +149,11 @@ wxString BOARD_ITEM::MenuText( const BOARD* aPcb ) const
             TimeStampText.Printf( wxT( "(%8.8X)" ), item->m_TimeStamp );
             text << TimeStampText;
         }
-        if( ((ZONE_CONTAINER*) item)->GetNet() >= 0 )
+        if ( !((ZONE_CONTAINER*) item)->IsOnCopperLayer() )
+        {
+            text << wxT( " [" ) << _("Not on copper layer") << wxT( "]" );
+        }
+        else if( ((ZONE_CONTAINER*) item)->GetNet() >= 0 )
         {
             net = aPcb->FindNet( ( (ZONE_CONTAINER*) item )->GetNet() );
             if( net )

pcbnew/class_zone.h

@@ -5,6 +5,8 @@
 #ifndef CLASS_ZONE_H
 #define CLASS_ZONE_H
 
+#include <vector>
+
 #include "PolyLine.h"
 
 /************************/
@@ -32,12 +34,18 @@ public:
     int                   m_GridFillValue;      // Grid used for filling
     m_PadInZone           m_PadOption;          // see m_PadInZone
     int                   utility, utility2;    // flags used in polygon calculations
+    std::vector <CPolyPt> m_FilledPolysList;  /* set of filled polygons used to draw a zone as a filled area.
+                                               * from outlines (m_Poly) but unlike m_Poly these filled polygons have no hole (they are all in one piece)
+                                               * In very simple cases m_FilledPolysList is same as m_Poly
+                                               * In less simple cases (when m_Poly has holes) m_FilledPolysList is a polygon equivalent to m_Poly, without holes
+                                               * In complex cases an ouline decribed by m_Poly can have many filled areas
+                                               */
 
 private:
     int m_NetCode;     // Net number for fast comparisons
 
 public:
-    ZONE_CONTAINER( BOARD * parent );
+    ZONE_CONTAINER( BOARD* parent );
     ~ZONE_CONTAINER();
 
     bool Save( FILE* aFile ) const;
@@ -46,9 +54,11 @@ public:
     wxPoint& GetPosition()
     {
         static wxPoint pos;
+
         return pos;
     }
 
+
     void UnLink( void )
     {
     };
@@ -70,8 +80,23 @@ public:
      * @param offset = Draw offset (usually wxPoint(0,0))
      * @param aDrawMode = GR_OR, GR_XOR, GR_COPY ..
      */
-    void    Draw( WinEDA_DrawPanel* panel, wxDC* DC, int aDrawMode, const wxPoint& offset = ZeroOffset );
+    void Draw( WinEDA_DrawPanel* panel,
+               wxDC*             DC,
+               int               aDrawMode,
+               const wxPoint&    offset = ZeroOffset );
 
+    /**
+     * Function DrawDrawFilledArea
+     * Draws the filled  area for this zone (polygon list .m_FilledPolysList)
+     * @param panel = current Draw Panel
+     * @param DC = current Device Context
+     * @param offset = Draw offset (usually wxPoint(0,0))
+     * @param aDrawMode = GR_OR, GR_XOR, GR_COPY ..
+     */
+    void     DrawFilledArea( WinEDA_DrawPanel* panel,
+                             wxDC*             DC,
+                             int               aDrawMode,
+                             const wxPoint&    offset = ZeroOffset );
 
     EDA_Rect GetBoundingBox();
 
@@ -88,10 +113,22 @@ public:
     void     DrawWhileCreateOutline( WinEDA_DrawPanel* panel, wxDC* DC, int draw_mode = GR_OR );
 
 
+    /**
+     * Function IsOnCopperLayer
+     * @return true if this zone is on a copper layer, false if on a technical layer
+     */
+    bool IsOnCopperLayer( void )
+    {
+        return ( GetLayer() < FIRST_NO_COPPER_LAYER ) ? true : false;
+    }
+
+
     int GetNet( void ) const
     {
         return m_NetCode;
     }
+
+
     void SetNet( int anet_code );
 
     /**
@@ -102,6 +139,14 @@ public:
      */
     bool HitTest( const wxPoint& refPos );
 
+    /** function BuildFilledPolysListData
+     * Build m_FilledPolysList data from real outlines (m_Poly)
+     * in order to have drawable (and plottable) filled polygons
+     * drawable filled polygons are polygons without hole
+     * @return number of polygons
+     */
+    int  BuildFilledPolysListData( void );
+
     /**
      * Function HitTestForCorner
      * tests if the given wxPoint near a corner, or near the segment define by 2 corners.
@@ -181,30 +226,35 @@ public:
         return wxT( "ZONE_CONTAINER" );
     }
 
+
     /** Acces to m_Poly parameters
      */
 
-    int GetNumCorners(void)
+    int GetNumCorners( void )
     {
         return m_Poly->GetNumCorners();
     }
 
-    void RemoveAllContours(void)
+
+    void RemoveAllContours( void )
     {
         m_Poly->RemoveAllContours();
     }
 
-    wxPoint GetCornerPosition(int aCornerIndex)
+
+    wxPoint GetCornerPosition( int aCornerIndex )
     {
-        return wxPoint(m_Poly->GetX(aCornerIndex), m_Poly->GetY(aCornerIndex));
+        return wxPoint( m_Poly->GetX( aCornerIndex ), m_Poly->GetY( aCornerIndex ) );
     }
 
-    void SetCornerPosition(int aCornerIndex, wxPoint new_pos)
+
+    void SetCornerPosition( int aCornerIndex, wxPoint new_pos )
     {
-        m_Poly->SetX(aCornerIndex, new_pos.x);
-        m_Poly->SetY(aCornerIndex, new_pos.y);
+        m_Poly->SetX( aCornerIndex, new_pos.x );
+        m_Poly->SetY( aCornerIndex, new_pos.y );
     }
 
+
     void AppendCorner( wxPoint position )
     {
         m_Poly->AppendCorner( position.x, position.y );

pcbnew/dialog_non_copper_zones_properties.cpp

+///////////////////////////////////////////////////////////////////////////
+// C++ code generated with wxFormBuilder (version Apr 16 2008)
+// http://www.wxformbuilder.org/
+//
+// PLEASE DO "NOT" EDIT THIS FILE!
+///////////////////////////////////////////////////////////////////////////
+
+#include "dialog_non_copper_zones_properties.h"
+
+///////////////////////////////////////////////////////////////////////////
+
+BEGIN_EVENT_TABLE( DialogNonCopperZonesProperties, wxDialog )
+	EVT_INIT_DIALOG( DialogNonCopperZonesProperties::_wxFB_InitDialog )
+	EVT_BUTTON( wxID_OK, DialogNonCopperZonesProperties::_wxFB_OnOkClick )
+	EVT_BUTTON( wxID_CANCEL, DialogNonCopperZonesProperties::_wxFB_OnCancelClick )
+END_EVENT_TABLE()
+
+DialogNonCopperZonesProperties::DialogNonCopperZonesProperties( wxWindow* parent, wxWindowID id, const wxString& title, const wxPoint& pos, const wxSize& size, long style ) : wxDialog( parent, id, title, pos, size, style )
+{
+	this->SetSizeHints( wxDefaultSize, wxDefaultSize );
+	
+	wxBoxSizer* m_MainSizer;
+	m_MainSizer = new wxBoxSizer( wxVERTICAL );
+	
+	wxBoxSizer* m_UpperSizer;
+	m_UpperSizer = new wxBoxSizer( wxHORIZONTAL );
+	
+	wxString m_OutlineAppearanceCtrlChoices[] = { _("Line"), _("Hatched Outline"), _("Full Hatched") };
+	int m_OutlineAppearanceCtrlNChoices = sizeof( m_OutlineAppearanceCtrlChoices ) / sizeof( wxString );
+	m_OutlineAppearanceCtrl = new wxRadioBox( this, wxID_ANY, _("Outlines Appearence"), wxDefaultPosition, wxDefaultSize, m_OutlineAppearanceCtrlNChoices, m_OutlineAppearanceCtrlChoices, 1, wxRA_SPECIFY_COLS );
+	m_OutlineAppearanceCtrl->SetSelection( 1 );
+	m_UpperSizer->Add( m_OutlineAppearanceCtrl, 0, wxALL|wxALIGN_CENTER_VERTICAL, 5 );
+	
+	wxString m_OrientEdgesOptChoices[] = { _("Any"), _("H, V and 45 deg") };
+	int m_OrientEdgesOptNChoices = sizeof( m_OrientEdgesOptChoices ) / sizeof( wxString );
+	m_OrientEdgesOpt = new wxRadioBox( this, wxID_ANY, _("Zone Edges Orient"), wxDefaultPosition, wxDefaultSize, m_OrientEdgesOptNChoices, m_OrientEdgesOptChoices, 1, wxRA_SPECIFY_COLS );
+	m_OrientEdgesOpt->SetSelection( 0 );
+	m_UpperSizer->Add( m_OrientEdgesOpt, 0, wxALL|wxALIGN_CENTER_VERTICAL, 5 );
+	
+	wxBoxSizer* m_ButtonsSizer;
+	m_ButtonsSizer = new wxBoxSizer( wxVERTICAL );
+	
+	m_buttonOk = new wxButton( this, wxID_OK, _("OK"), wxDefaultPosition, wxDefaultSize, 0 );
+	m_buttonOk->SetDefault(); 
+	m_ButtonsSizer->Add( m_buttonOk, 0, wxALL|wxALIGN_CENTER_HORIZONTAL, 5 );
+	
+	m_buttonCancel = new wxButton( this, wxID_CANCEL, _("Cancel"), wxDefaultPosition, wxDefaultSize, 0 );
+	m_ButtonsSizer->Add( m_buttonCancel, 0, wxALL|wxALIGN_CENTER_HORIZONTAL, 5 );
+	
+	m_UpperSizer->Add( m_ButtonsSizer, 1, wxALIGN_CENTER_VERTICAL, 5 );
+	
+	m_MainSizer->Add( m_UpperSizer, 1, wxEXPAND|wxALIGN_CENTER_HORIZONTAL, 5 );
+	
+	m_staticTextLayerSelection = new wxStaticText( this, wxID_ANY, _("Layer selection:"), wxDefaultPosition, wxDefaultSize, 0 );
+	m_staticTextLayerSelection->Wrap( -1 );
+	m_MainSizer->Add( m_staticTextLayerSelection, 0, wxTOP|wxRIGHT|wxLEFT, 5 );
+	
+	m_LayerSelectionCtrl = new wxListBox( this, wxID_ANY, wxDefaultPosition, wxDefaultSize, 0, NULL, 0 ); 
+	m_MainSizer->Add( m_LayerSelectionCtrl, 0, wxEXPAND|wxBOTTOM|wxRIGHT|wxLEFT, 5 );
+	
+	this->SetSizer( m_MainSizer );
+	this->Layout();
+	
+	this->Centre( wxBOTH );
+}
+
+DialogNonCopperZonesProperties::~DialogNonCopperZonesProperties()
+{
+}

pcbnew/dialog_non_copper_zones_properties.h

+///////////////////////////////////////////////////////////////////////////
+// C++ code generated with wxFormBuilder (version Apr 16 2008)
+// http://www.wxformbuilder.org/
+//
+// PLEASE DO "NOT" EDIT THIS FILE!
+///////////////////////////////////////////////////////////////////////////
+
+#ifndef __dialog_non_copper_zones_properties__
+#define __dialog_non_copper_zones_properties__
+
+#include <wx/intl.h>
+
+#include <wx/string.h>
+#include <wx/radiobox.h>
+#include <wx/gdicmn.h>
+#include <wx/font.h>
+#include <wx/colour.h>
+#include <wx/settings.h>
+#include <wx/button.h>
+#include <wx/sizer.h>
+#include <wx/stattext.h>
+#include <wx/listbox.h>
+#include <wx/dialog.h>
+
+///////////////////////////////////////////////////////////////////////////
+
+///////////////////////////////////////////////////////////////////////////////
+/// Class DialogNonCopperZonesProperties
+///////////////////////////////////////////////////////////////////////////////
+class DialogNonCopperZonesProperties : public wxDialog 
+{
+	DECLARE_EVENT_TABLE()
+	private:
+		
+		// Private event handlers
+		void _wxFB_InitDialog( wxInitDialogEvent& event ){ InitDialog( event ); }
+		void _wxFB_OnOkClick( wxCommandEvent& event ){ OnOkClick( event ); }
+		void _wxFB_OnCancelClick( wxCommandEvent& event ){ OnCancelClick( event ); }
+		
+	
+	protected:
+		wxRadioBox* m_OutlineAppearanceCtrl;
+		wxRadioBox* m_OrientEdgesOpt;
+		wxButton* m_buttonOk;
+		wxButton* m_buttonCancel;
+		wxStaticText* m_staticTextLayerSelection;
+		wxListBox* m_LayerSelectionCtrl;
+		
+		// Virtual event handlers, overide them in your derived class
+		virtual void InitDialog( wxInitDialogEvent& event ){ event.Skip(); }
+		virtual void OnOkClick( wxCommandEvent& event ){ event.Skip(); }
+		virtual void OnCancelClick( wxCommandEvent& event ){ event.Skip(); }
+		
+	
+	public:
+		DialogNonCopperZonesProperties( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("Non Copper Zones Properties"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxSize( 366,221 ), long style = wxDEFAULT_DIALOG_STYLE|wxRESIZE_BORDER|wxFULL_REPAINT_ON_RESIZE|wxSUNKEN_BORDER );
+		~DialogNonCopperZonesProperties();
+	
+};
+
+#endif //__dialog_non_copper_zones_properties__

pcbnew/dialog_zones_by_polygon.cpp

@@ -260,7 +260,7 @@ void WinEDA_ZoneFrame::CreateControls()
                                    m_Parent->m_InternalUnits );
     m_ZoneClearanceCtrl->SetValue( title );
 
-    if( Zone_45_Only )
+    if( g_Zone_45_Only )
         m_OrientEdgesOpt->SetSelection( 1 );
 
     static const int GridList[4] = { 25, 50, 100, 250 };
@@ -297,7 +297,7 @@ void WinEDA_ZoneFrame::CreateControls()
             m_FillOpt->SetSelection( 0 );
             break;
         }
-        s_Zone_Hatching = m_Zone_Container->m_Poly->GetHatchStyle();
+        g_Zone_Hatching = m_Zone_Container->m_Poly->GetHatchStyle();
 
     }
     else
@@ -314,11 +314,11 @@ void WinEDA_ZoneFrame::CreateControls()
             m_FillOpt->SetSelection( 0 );
             break;
         }
-        s_Zone_Hatching = m_Parent->m_Parent->m_EDA_Config->Read( ZONE_NET_OUTLINES_HATCH_OPTION_KEY,
+        g_Zone_Hatching = m_Parent->m_Parent->m_EDA_Config->Read( ZONE_NET_OUTLINES_HATCH_OPTION_KEY,
             (long) CPolyLine::DIAGONAL_EDGE );
     }
 
-    switch( s_Zone_Hatching )
+    switch( g_Zone_Hatching )
     {
     case CPolyLine::NO_HATCH:
         m_OutlineAppearanceCtrl->SetSelection(0);
@@ -485,21 +485,21 @@ bool WinEDA_ZoneFrame::AcceptOptions(bool aPromptForErrors)
     switch( m_OutlineAppearanceCtrl->GetSelection() )
     {
     case 0:
-        s_Zone_Hatching = CPolyLine::NO_HATCH;
+        g_Zone_Hatching = CPolyLine::NO_HATCH;
         break;
 
     case 1:
-        s_Zone_Hatching = CPolyLine::DIAGONAL_EDGE;
+        g_Zone_Hatching = CPolyLine::DIAGONAL_EDGE;
         break;
 
     case 2:
-        s_Zone_Hatching = CPolyLine::DIAGONAL_FULL;
+        g_Zone_Hatching = CPolyLine::DIAGONAL_FULL;
         break;
     }
 
     if( m_Parent->m_Parent->m_EDA_Config )
     {
-        m_Parent->m_Parent->m_EDA_Config->Write( ZONE_NET_OUTLINES_HATCH_OPTION_KEY, (long)s_Zone_Hatching);
+        m_Parent->m_Parent->m_EDA_Config->Write( ZONE_NET_OUTLINES_HATCH_OPTION_KEY, (long)g_Zone_Hatching);
     }
 
     switch( m_GridCtrl->GetSelection() )
@@ -526,9 +526,9 @@ bool WinEDA_ZoneFrame::AcceptOptions(bool aPromptForErrors)
     g_DesignSettings.m_ZoneClearence =
         ReturnValueFromString( g_UnitMetric, txtvalue, m_Parent->m_InternalUnits );
     if( m_OrientEdgesOpt->GetSelection() == 0 )
-        Zone_45_Only = FALSE;
+        g_Zone_45_Only = FALSE;
     else
-        Zone_45_Only = TRUE;
+        g_Zone_45_Only = TRUE;
 
     /* Get the layer selection for this zone */
     int ii = m_LayerSelectionCtrl->GetSelection();
@@ -537,7 +537,7 @@ bool WinEDA_ZoneFrame::AcceptOptions(bool aPromptForErrors)
         DisplayError( this, _( "Error : you must choose a layer" ) );
         return false;
     }
-    s_Zone_Layer = m_LayerId[ii];
+    g_CurrentZone_Layer = m_LayerId[ii];
 
     /* Get the net name selection for this zone */
     ii = m_ListNetNameSelection->GetSelection();

pcbnew/drc.cpp

@@ -320,6 +320,8 @@ void DRC::testZones(bool adoTestFillSegments)
     for( int ii = 0; ii < m_pcb->GetAreaCount(); ii++ )
     {
         ZONE_CONTAINER* Area_To_Test = m_pcb->GetArea( ii );
+        if( ! Area_To_Test->IsOnCopperLayer() )
+            continue;
         if( Area_To_Test->GetNet() <= 0 )
         {
             m_currentMarker = fillMarker( Area_To_Test,

pcbnew/ioascii.cpp

@@ -771,7 +771,7 @@ int WinEDA_PcbFrame::ReadPcbFile( FILE* File, bool Append )
 
     wxBusyCursor    dummy;
 
-    // Switch the locale to standard C (needed to print floating point numbers like 1.3)
+    // Switch the locale to standard C (needed to read floating point numbers like 1.3)
     SetLocaleTo_C_standard( );
 
     NbDraw = NbTrack = NbZone = NbMod = NbNets = -1;
@@ -1010,6 +1010,13 @@ int WinEDA_PcbFrame::ReadPcbFile( FILE* File, bool Append )
     BestZoom();
 
 #ifdef PCBNEW
+    if( m_Pcb->m_ZoneDescriptorList.size() > 0 )
+    {   // Build filled areas
+        for( unsigned ia = 0; ia < m_Pcb->m_ZoneDescriptorList.size(); ia++ )
+            m_Pcb->m_ZoneDescriptorList[ia]->BuildFilledPolysListData( );
+    }
+
+    // Build connectivity info
     Compile_Ratsnest( NULL, TRUE );
 #endif
     return 1;

pcbnew/makefile.include

@@ -20,6 +20,8 @@ OBJECTS=	$(TARGET).o classpcb.o\
 		$(SPECCTRA_TOOLS)\
 		lay2plot.o\
 		dialog_freeroute_exchange.o\
+		dialog_non_copper_zones_properties.o\
+		zones_non_copper_type_functions.o\
 		modedit_undo_redo.o\
 		block_module_editor.o\
 		onrightclick.o\

pcbnew/pcbnew.cpp

@@ -18,6 +18,7 @@
 #include "trigo.h"
 #include "cell.h"
 #include "worksheet.h"
+#include "zones.h"
 
 #include "protos.h"
 

pcbnew/protos.h

@@ -8,6 +8,10 @@
 
 #include <vector>
 
+
+/* install function for DialogNonCopperZonesEditor dialog frame :*/
+bool InstallDialogNonCopperZonesEditor(WinEDA_PcbFrame* aParent, ZONE_CONTAINER* aZone);
+
 /***************/
 /* PAD_CONNECT.CPP */
 /***************/

pcbnew/tracepcb.cpp

@@ -173,7 +173,10 @@ void WinEDA_PcbFrame::Trace_Pcb( wxDC* DC, int mode )
         // Areas must be drawn here only if not moved or dragged,
         // because these areas are drawn by ManageCursor() in a specific manner
         if ( (edge_zone->m_Flags & (IN_EDIT | IS_DRAGGED | IS_MOVED)) == 0 )
+        {
             edge_zone->Draw( DrawPanel, DC, mode );
+            edge_zone->DrawFilledArea( DrawPanel, DC, mode );
+        }
     }
 
     // draw the BOARD's markers.

pcbnew/zones.h

+/************************************************/
+/* constants used in zone dialogs and functions */
+/************************************************/
+
+#ifndef ZONES_H
+#define ZONES_H
+
+
+#ifndef eda_global
+#define eda_global extern
+#endif
+
+
+// keys used to store net sort option in config file :
+#define ZONE_NET_OUTLINES_HATCH_OPTION_KEY wxT( "Zone_Ouline_Hatch_Opt" )
+#define ZONE_NET_SORT_OPTION_KEY           wxT( "Zone_NetSort_Opt" )
+#define ZONE_NET_FILTER_STRING_KEY         wxT( "Zone_Filter_Opt" )
+
+enum zone_cmd {
+    ZONE_ABORT,
+    ZONE_OK
+};
+
+
+/************************************************/
+/* variables used in zone dialogs and functions */
+/************************************************/
+
+eda_global bool g_Zone_45_Only
+#ifdef MAIN
+= FALSE
+#endif
+;
+eda_global int g_CurrentZone_Layer;                 // Layer used to create the current zone
+eda_global int g_Zone_Hatching;                     // Option to show the zone area (outlines only, short hatches or full hatches
+
+#endif  //   ifndef ZONES_H