Commit 2515a806 authored by Dick Hollenbeck's avatar Dick Hollenbeck

initial work on PCBNew PLUGIN support, in preparation for nanometer board load and save

parent 5e3ca2e7
......@@ -4,6 +4,14 @@ KiCad ChangeLog 2010
Please add newer entries at the top, list the date and your name with
email address.
2011-Nov-27 UPDATE Dick Hollenbeck <dick@softplc.com>
================================================================================
PCBNew
* Add PLUGIN and IO_MGR classes.
* Remove one argument from BOARD constructor,
* add BOARD::SetWindowFrame()
2011-sept-13 UPDATE Wayne Stambaugh <stambaughw@verizon.net>
================================================================================
PCBNew locate code refactoring.
......
......@@ -33,14 +33,6 @@ in the BIU coordinate system. Points falling on the snap grid are evenly spaced
in X and Y directions and are some integer multiple apart in this 2D space,
greater than one BIU.
*) Metric Board. This is a pcb board that has a great number of coordinates and
distances that happen to be some multiple of the BIU that is also a multiple of
a metric engineering unit such as micrometers.
*) Imperial Board. This is a pcb board that has a great number of coordinates and
distances that happen to be some multiple of the BIU that is also a multiple of
an imperial engineering unit such as mils or inches.
Assumptions:
===========
......@@ -97,10 +89,10 @@ then FMT_ENG will be set to "%.6Lg". For example:
#if USE_DOUBLE_BFU
typedef double BFU;
#define FMT_ENG ".%6g"
#define FMT_ENG ".%10g"
#else
typedef long double BFU;
#define FMT_ENG ".%6Lg"
#define FMT_ENG ".%10Lg"
#endif
A format string can then be built up using compile time concatenation of
......@@ -158,7 +150,7 @@ Here are the required immediate need BOARD load functions:
of unity, since destination is a RAM BOARD using deci-mils as its BIU.
2) Legacy to nanometer loader. This loader uses a floating point scaling factor
of ________, since destination is a RAM BOARD using nanometers as its BIU, and
of 2540, since destination is a RAM BOARD using nanometers as its BIU, and
the source format is using deci-mils.
3) mm to nanometer loader. This loader uses a floating point scaling factor
......
......@@ -10,10 +10,10 @@ may choose to document this corresponding work in the CHANGELOG.txt file.
/*
* This program source code file is part of KICAD, a free EDA CAD application.
* This program source code file is part of KiCad, a free EDA CAD application.
*
* Copyright (C) 1992-2011 <author>
* Copyright (C) 1992-2011 Kicad Developers, see change_log.txt for contributors.
* Copyright (C) 2011 <author>
* Copyright (C) 2011 KiCad Developers, see change_log.txt for contributors.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
......
......@@ -61,7 +61,7 @@ DISPLAY_FOOTPRINTS_FRAME::DISPLAY_FOOTPRINTS_FRAME( CVPCB_MAINFRAME* father,
icon.CopyFromBitmap( KiBitmap( icon_cvpcb_xpm ) );
SetIcon( icon );
SetBoard( new BOARD( NULL, this ) );
SetBoard( new BOARD( this ) );
SetScreen( new PCB_SCREEN() );
LoadSettings();
......
......@@ -51,7 +51,7 @@ GBR_TO_PCB_EXPORTER::GBR_TO_PCB_EXPORTER( GERBVIEW_FRAME * aFrame, FILE * aFile
{
m_gerbview_frame = aFrame;
m_file = aFile;
m_pcb = new BOARD( NULL, m_gerbview_frame );
m_pcb = new BOARD( m_gerbview_frame );
}
......
......@@ -61,7 +61,7 @@ GERBVIEW_FRAME::GERBVIEW_FRAME( wxWindow* father,
SetScreen( new PCB_SCREEN() );
GetScreen()->m_CurrentSheetDesc = &g_Sheet_GERBER;
SetBoard( new BOARD( NULL, this ) );
SetBoard( new BOARD( this ) );
GetBoard()->SetEnabledLayers( FULL_LAYERS ); // All 32 layers enabled at first.
GetBoard()->SetVisibleLayers( FULL_LAYERS ); // All 32 layers visible.
......
......@@ -126,7 +126,9 @@ set(PCBNEW_SRCS
hotkeys_board_editor.cpp
hotkeys_module_editor.cpp
initpcb.cpp
# io_mgr.cpp
ioascii.cpp
# kicad_plugin.cpp
layer_widget.cpp
librairi.cpp
loadcmp.cpp
......
......@@ -32,14 +32,14 @@ BOARD_DESIGN_SETTINGS boardDesignSettings;
BOARD::BOARD( EDA_ITEM* parent, PCB_BASE_FRAME* frame ) :
BOARD_ITEM( (BOARD_ITEM*)parent, PCB_T ),
BOARD::BOARD( PCB_BASE_FRAME* frame ) :
BOARD_ITEM( (BOARD_ITEM*) NULL, PCB_T ),
m_NetClasses( this )
{
m_PcbFrame = frame;
m_Status_Pcb = 0; // Status word: bit 1 = calculate.
SetBoardDesignSettings(&boardDesignSettings);
SetColorsSettings(&g_ColorsSettings);
SetBoardDesignSettings( &boardDesignSettings );
SetColorsSettings( &g_ColorsSettings );
m_NbNodes = 0; // Number of connected pads.
m_NbNoconnect = 0; // Number of unconnected nets.
......
......@@ -161,6 +161,12 @@ private:
public:
PCB_BASE_FRAME* m_PcbFrame; // Window of visualization
void SetWindowFrame( PCB_BASE_FRAME* aFrame )
{
m_PcbFrame = aFrame;
}
EDA_RECT m_BoundaryBox; // Board size and position
/// Flags used in ratsnest calculation and update.
......@@ -231,7 +237,7 @@ private:
void chainMarkedSegments( wxPoint aPosition, int aLayerMask, TRACK_PTRS* aList );
public:
BOARD( EDA_ITEM* aParent, PCB_BASE_FRAME* frame );
BOARD( PCB_BASE_FRAME* frame );
~BOARD();
/**
......
......@@ -39,7 +39,7 @@ bool PCB_EDIT_FRAME::Clear_Pcb( bool aQuery )
// delete the old BOARD and create a new BOARD so that the default
// layer names are put into the BOARD.
SetBoard( new BOARD( NULL, this ) );
SetBoard( new BOARD( this ) );
SetCurItem( NULL );
/* clear filename, to avoid overwriting an old file */
......
/*
* This program source code file is part of KiCad, a free EDA CAD application.
*
* Copyright (C) 2011 SoftPLC Corporation, Dick Hollenbeck <dick@softplc.com>
* Copyright (C) 2011 KiCad Developers, see change_log.txt for contributors.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, you may find one here:
* http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
* or you may search the http://www.gnu.org website for the version 2 license,
* or you may write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
*/
#include <io_mgr.h>
#include <kicad_plugin.h>
// some day plugins could be in separate DLL/DSOs, until then, use the simplest method:
// This implementation is one of two which could be done.
// the other one would cater to DLL/DSO's. But since it would be nearly
// impossible to link a KICAD type DLL/DSO right now without pulling in all
// ::Draw() functions, I forgo that option.
// Some day it may be possible to have some built in AND some DLL/DSO, but
// only when we can keep things clean enough to link a DLL/DSO without
// pulling in the world.
static KICAD_PLUGIN kicad_plugin;
//static EAGLE_PLUGIN eagle_plugin;
PLUGIN* IO_MGR::PluginFind( PCB_FILE_T aFileType )
{
switch( aFileType )
{
case KICAD: return &kicad_plugin;
// case EAGLE: return &eagle_plugin;
}
return NULL;
}
void IO_MGR::PluginRelease( PLUGIN* aPlugin )
{
// This function is a place holder for a future point in time where
// the plugin is a DLL/DSO. It could do reference counting, and then
// unload the DLL/DSO when count goes to zero.
}
const wxString& IO_MGR::ShowType( PCB_FILE_T aFileType )
{
static const wxString kicad = wxT( "KiCad" );
static const wxString unknown = _( "Unknown" );
switch( aFileType )
{
case KICAD:
return kicad;
default:
return unknown; // could Printf() the numeric value of aFileType
}
}
BOARD* IO_MGR::Load( PCB_FILE_T aFileType, const wxString& aFileName,
BOARD* aAppendToMe, PROPERTIES* aProperties )
{
// release the PLUGIN even if an exception is thrown.
PLUGIN::RELEASER pi = PluginFind( aFileType );
if( (PLUGIN*) pi ) // test pi->plugin
{
return pi->Load( aFileName, aAppendToMe, aProperties ); // virtual
}
wxString msg;
msg.Printf( _( "Plugin type '%s' is not found.\n" ), ShowType( aFileType ).GetData() );
THROW_IO_ERROR( msg );
}
BOARD* PLUGIN::Load( const wxString& aFileName, BOARD* aAppendToMe, PROPERTIES* aProperties )
{
// not pure virtual so that plugins only have to implement subset of the PLUGIN interface,
// e.g. Load() or Save() but not both.
wxString msg;
msg.Printf( _( "Plugin %s does not implement the BOARD Load() function.\n" ),
Name().GetData() );
THROW_IO_ERROR( msg );
}
void PLUGIN::Save( const wxString* aFileName, BOARD* aBoard, PROPERTIES* aProperties )
{
// not pure virtual so that plugins only have to implement subset of the PLUGIN interface,
// e.g. Load() or Save() but not both.
wxString msg;
msg.Printf( _( "Plugin %s does not implement the BOARD Save() function.\n" ),
Name().GetData() );
THROW_IO_ERROR( msg );
}
#ifndef IO_MGR_H_
#define IO_MGR_H_
/*
* This program source code file is part of KICAD, a free EDA CAD application.
*
* Copyright (C) 2011 SoftPLC Corporation, Dick Hollenbeck <dick@softplc.com>
* Copyright (C) 2011 Kicad Developers, see change_log.txt for contributors.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, you may find one here:
* http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
* or you may search the http://www.gnu.org website for the version 2 license,
* or you may write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
*/
#include <wx/string.h>
#include <wx/hashmap.h>
#include <richio.h>
// http://docs.wxwidgets.org/trunk/classwx_hash_map.html
WX_DECLARE_STRING_HASH_MAP( wxString, PROPERTIES );
class BOARD;
class SCHEMATIC;
class PLUGIN;
/**
* Class IO_MGR
* is factory which returns an instance of a PLUGIN DSO/DLL.
*/
class IO_MGR
{
public:
/**
* Enum PCB_FILE_T
* is a set of file types that the IO_MGR knows about, and for which there
* has been a plugin written.
*/
enum PCB_FILE_T
{
KICAD,
// EAGLE,
// ALTIUM,
// etc.
};
/**
* Function PluginFind
* returns a PLUGIN which the caller can use to import, export, save, or load
* design documents. The returned PLUGIN, may be reference counted, so please
* call PluginRelease() when you are done using the returned PLUGIN.
*
* @param aFileType is from PCB_FILE_T and tells which plugin to find.
*
* @return PLUGIN* - the plugin corresponding to aFileType or NULL if not found.
* Caller owns the returned object, and must call PluginRelease when done using it.
*/
static PLUGIN* PluginFind( PCB_FILE_T aFileType );
/**
* Function PluginRelease
* releases a PLUGIN back to the system, and may cause it to be unloaded from memory.
*
* @param aPlugin is the one to be released, and which is no longer usable.
*/
static void PluginRelease( PLUGIN* aPlugin );
/**
* Function ShowType
* returns a brief name for a plugin, given aFileType enum.
*/
static const wxString& ShowType( PCB_FILE_T aFileType );
/**
* Function Load
* finds the requested plugin and loads a BOARD, or throws an exception trying.
*
* @param aFileType is the type of file to load.
*
* @param aFileName is the name of the file to load.
*
* @param aAppendToMe is an existing BOARD to append to, use NULL if fresh
* board load wanted.
*
* @param aProperties is an associative array that allows the caller to
* pass additional tuning parameters to the plugin.
*
* @return BOARD* - caller owns it, never NULL because exception thrown if error.
*
* @throw IO_ERROR if the pluging cannot be found, file cannot be found,
* or file cannot be loaded.
*/
static BOARD* Load( PCB_FILE_T aFileType, const wxString& aFileName,
BOARD* aAppendToMe = NULL, PROPERTIES* aProperties = NULL );
// etc.
};
/**
* Class PLUGIN
* is a base class that BOARD loading and saving plugins should derive from.
* Implementations can provide either Load() or Save() functions, or both.
* PLUGINs throw exceptions, so it is best that you wrap your calls to these
* functions in a try catch block, and also do the switching to stardard C locale
* and back, outside the region in which an exception can be thrown. This means
* the PLUGINs do not deal with the locale, the caller does.
*
* <pre>
*
* // Switch the locale to standard C (needed to read floating point numbers
* // like 1.3)
*
* SetLocaleTo_C_standard();
* try
* {
* pi->Load(...);
* }
* catch( IO_ERROR ioe )
* {
* // grab text from ioe, show in error window.
* }
* SetLocaleTo_Default(); // revert to the current locale
*
* </pre>
*/
class PLUGIN
{
public:
virtual ~PLUGIN() {}
/**
* Class RELEASER
* releases a PLUGIN in the context of a potential thrown exception, through
* its destructor.
*/
class RELEASER
{
PLUGIN* plugin;
public:
RELEASER( PLUGIN* aPlugin = NULL ) :
plugin( aPlugin )
{
}
~RELEASER()
{
if( plugin )
IO_MGR::PluginRelease( plugin );
}
operator PLUGIN* ()
{
return plugin;
}
PLUGIN* operator -> ()
{
return plugin;
}
};
virtual const wxString& Name() = 0;
//-----<BOARD STUFF>----------------------------------------------------
/**
* Function Load
* loads a board file from some input file format that this implementation
* knows about.
*
* @param aFileName is the name of the file to load and may be foreign in
* nature or native in nature.
*
* @param aAppendToMe is an existing BOARD to append to but is often NULL
* meaning do not append.
*
* @param aProperties is an associative array that can be used to tell the
* loader how to load the file, because it can take any number of
* additional named arguments that the plugin is known to support.
*
* @return BOARD* - the successfully loaded board, and caller owns it.
*
* @throw IO_ERROR if there is a problem loading, and its contents should
* say what went wrong.
*/
virtual BOARD* Load( const wxString& aFileName, BOARD* aAppendToMe,
PROPERTIES* aProperties = NULL );
/**
* Function Save
* will write a full aBoard to a storage file in a format that only this
* implementation knows about. Or it can be used to write a portion of
* aBoard to a special kind of export file.
*
* @param aFileName is the name of a file to save to on disk.
* @param aBoard is the BOARD document (data tree) to save or export to disk.
*
* @param aProperties is an associative array that can be used to tell the
* saver how to save the file, because it can take any number of
* additional named arguments that the plugin is known to support.
*
* @throw IO_ERROR if there is a problem loading.
*/
virtual void Save( const wxString* aFileName, BOARD* aBoard,
PROPERTIES* aProperties = NULL );
//-----</BOARD STUFF>---------------------------------------------------
#if 0
///--------- Should split into two PLUGIN base types here, rather than being combined like this
//-----<SCHEMATIC STUFF>------------------------------------------------
/**
* Function Load
* loads a file from some special input file format that
* only this implementation knows about.
* @param aFileName is the name of the file to load and may be foreign in nature or native in nature.
* @param aAppendToMe is an existing SCHEMATIC to append to but may be NULL.
*/
virtual SCHEMATIC* Load( const wxString& aFileName, SCHEMATIC* aAppendToMe,
PROPERTIES* aProperties = NULL )
{
// not pure virtual so that plugins only have to implement
// Load() or Save() but not both.
}
/**
* Function Save
* will write aBoard to a storage file in a format that only this
* implementation knows about.
*
* @param aFileName is the name of a file to save to on disk.
*
* @param aBoard is the SCHEMATIC document (ram data tree) to save or export to disk.
*/
virtual void Save( const wxString* aFileName, SCHEMATIC* aSchematic,
PROPERTIES* aProperties = NULL )
{
// not pure virtual so that plugins only have to implement
// Load() or Save() but not both.
}
//-----</SCHEMATIC STUFF>----------------------------------------------
#endif
};
#endif // IO_MGR_H_
/*
* This program source code file is part of KiCad, a free EDA CAD application.
*
* Copyright (C) 1992-2011 KiCad Developers, see change_log.txt for contributors.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, you may find one here:
* http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
* or you may search the http://www.gnu.org website for the version 2 license,
* or you may write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
*/
/* This implements loading and saving a BOARD, behind the PLUGIN interface.
*/
#include <math.h>
#include <stdio.h>
#include <string.h>
#include <kicad_plugin.h> // I implement this
#include <auto_ptr.h>
#include <kicad_string.h>
//#include <fctsys.h>
//#include <confirm.h>
//#include <build_version.h>
//#include <wxPcbStruct.h">
//#include <macros.h>
//#include <pcbcommon.h>
#include <zones.h>
#ifdef CVPCB
//#include <cvpcb.h>
#endif
#include <class_board.h>
#include <class_module.h>
#include <class_track.h>
#include <class_pcb_text.h>
#include <class_zone.h>
#include <class_dimension.h>
#include <class_drawsegment.h>
#include <class_mire.h>
#include <3d_struct.h>
/*
#include <pcbnew.h>
#include <pcbnew_id.h>
#include <autorout.h>
#include <pcb_plot_params.h>
*/
/* ASCII format of structures:
*
* Structure PAD:
*
* $PAD
* Sh "name" form DIMVA dimH dV dH East: general form dV, dH = delta size
* Dr. diam dV dH: drill: diameter drilling offsets
* At Type S / N layers: standard, cms, conn, hole, meca.,
* Stack / Normal, 32-bit hexadecimal: occupation layers
* Nm net_code netname
* Po posrefX posrefy: reFX position, Y (0 = east position / anchor)
* $EndPAD
*
* Module Structure
*
* $MODULE namelib
* Po ax ay east layer masquelayer m_TimeCode
* ax ay ord = anchor (position module)
* east = east to 0.1 degree
* layer = layer number
* masquelayer = silkscreen layer for
* m_TimeCode internal use (groups)
* Li <namelib>
*
* Cd <text> description of the component (Component Doc)
* Kw <text> List of key words
*
* Sc schematic timestamp, reference schematic
*
* Op rot90 rot180 placement Options Auto (court rot 90, 180)
* rot90 is about 2x4-bit:
* lsb = cost rot 90, rot court msb = -90;
*
* Tn px py DIMVA dimh East thickness mirror visible "text"
* n = type (0 = ref, val = 1,> 1 = qcq
* Texts POS x, y / anchor and orient module 0
* DIMVA dimh East
* mirror thickness (Normal / Mirror)
* Visible V / I
* DS ox oy fx fy w
* Edge: coord segment ox, oy has fx, fy, on
* was the anchor and orient 0
* thickness w
* DC ox oy fx fy w descr circle (center, 1 point, thickness)
* $PAD
* $EndPAD section pads if available
* $Endmodule
*/
#define MM_PER_BIU 1e-6
#define UM_PER_BIU 1e-3
using namespace std;
BOARD* KICAD_PLUGIN::Load( const wxString& aFileName, BOARD* aAppendToMe, PROPERTIES* aProperties )
{
wxString msg;
BOARD* board = aAppendToMe ? aAppendToMe : new BOARD( NULL );
// delete on exception, iff I own it, according to aAppendToMe
auto_ptr<BOARD> deleter( aAppendToMe ? NULL : board );
FILE* fp = wxFopen( aFileName, wxT( "rt" ) );
if( !fp )
{
msg.Printf( _( "Unable to open file '%s'" ), aFileName.GetData() );
THROW_IO_ERROR( msg );
}
FILE_LINE_READER reader( fp, aFileName );
aReader = &reader;
init( board, aProperties );
// Put a dollar sign in front, and test for a specific length of characters
// The -1 is to omit the trailing \0 which is included in sizeof() on a
// string.
#define TESTLINE( x ) (strncmp( line, "$" x, sizeof("$" x) - 1 ) == 0)
while( aReader->ReadLine() )
{
char* line = aReader->Line();
// put the more frequent ones at the top
if( TESTLINE( "MODULE" ) )
{
MODULE* module = new MODULE( board );
board->Add( module, ADD_APPEND );
load( module );
continue;
}
if( TESTLINE( "DRAWSEGMENT" ) )
{
DRAWSEGMENT* dseg = new DRAWSEGMENT( board );
board->Add( dseg, ADD_APPEND );
load( dseg );
continue;
}
if( TESTLINE( "EQUIPOT" ) )
{
NETINFO_ITEM* net = new NETINFO_ITEM( board );
board->m_NetInfo->AppendNet( net );
load( net );
continue;
}
if( TESTLINE( "TEXTPCB" ) )
{
TEXTE_PCB* pcbtxt = new TEXTE_PCB( board );
board->Add( pcbtxt, ADD_APPEND );
load( pcbtxt );
continue;
}
if( TESTLINE( "TRACK" ) )
{
#if 0 && defined(PCBNEW)
TRACK* insertBeforeMe = Append ? NULL : board->m_Track.GetFirst();
ReadListeSegmentDescr( aReader, insertBeforeMe, PCB_TRACE_T, NbTrack );
#endif
continue;
}
if( TESTLINE( BRD_NETCLASS ) )
{
/*
// create an empty NETCLASS without a name.
NETCLASS* netclass = new NETCLASS( board, wxEmptyString );
// fill it from the *.brd file, and establish its name.
netclass->ReadDescr( aReader );
if( !board->m_NetClasses.Add( netclass ) )
{
// Must have been a name conflict, this is a bad board file.
// User may have done a hand edit to the file.
// Delete netclass if board could not take ownership of it.
delete netclass;
// @todo: throw an exception here, this is a bad board file.
}
*/
continue;
}
if( TESTLINE( "CZONE_OUTLINE" ) )
{
auto_ptr<ZONE_CONTAINER> zone_descr( new ZONE_CONTAINER( board ) );
load( zone_descr.get() );
if( zone_descr->GetNumCorners() > 2 ) // should always occur
board->Add( zone_descr.release() );
// else delete zone_descr; done by auto_ptr
continue;
}
if( TESTLINE( "COTATION" ) )
{
DIMENSION* dim = new DIMENSION( board );
board->Add( dim, ADD_APPEND );
load( dim );
continue;
}
if( TESTLINE( "PCB_TARGET" ) )
{
PCB_TARGET* t = new PCB_TARGET( board );
board->Add( t, ADD_APPEND );
load( t );
continue;
}
if( TESTLINE( "ZONE" ) )
{
#if 0 && defined(PCBNEW)
SEGZONE* insertBeforeMe = Append ? NULL : board->m_Zone.GetFirst();
ReadListeSegmentDescr( aReader, insertBeforeMe, PCB_ZONE_T, NbZone );
#endif
continue;
}
if( TESTLINE( "GENERAL" ) )
{
loadGeneral( board );
continue;
}
if( TESTLINE( "SHEETDESCR" ) )
{
loadSheet( board );
continue;
}
if( TESTLINE( "SETUP" ) )
{
if( !aAppendToMe )
{
loadSetup( board );
}
else
{
while( aReader->ReadLine() )
{
line = aReader->Line();
if( TESTLINE( "EndSETUP" ) )
break;
}
}
continue;
}
if( TESTLINE( "EndPCB" ) )
break;
}
deleter.release(); // no exceptions possible between here and return
return board;
}
void KICAD_PLUGIN::load( MODULE* me )
{
char* line = aReader->Line();
char* text = line + 3;
S3D_MASTER* t3D = me->m_3D_Drawings;
if( !t3D->m_Shape3DName.IsEmpty() )
{
S3D_MASTER* n3D = new S3D_MASTER( me );
me->m_3D_Drawings.PushBack( n3D );
t3D = n3D;
}
while( aReader->ReadLine() )
{
line = aReader->Line();
switch( line[0] )
{
case '$':
if( line[1] == 'E' )
{
return 0;
}
return 1;
case 'N': // Shape File Name
{
char buf[512];
ReadDelimitedText( buf, text, 512 );
t3D->m_Shape3DName = FROM_UTF8( buf );
break;
}
case 'S': // Scale
sscanf( text, "%lf %lf %lf\n",
&t3D->m_MatScale.x,
&t3D->m_MatScale.y,
&t3D->m_MatScale.z );
break;
case 'O': // Offset
sscanf( text, "%lf %lf %lf\n",
&t3D->m_MatPosition.x,
&t3D->m_MatPosition.y,
&t3D->m_MatPosition.z );
break;
case 'R': // Rotation
sscanf( text, "%lf %lf %lf\n",
&t3D->m_MatRotation.x,
&t3D->m_MatRotation.y,
&t3D->m_MatRotation.z );
break;
default:
break;
}
}
}
std::string KICAD_PLUGIN::biuFmt( BIU aValue )
{
BFU engUnits = biuToDiskUnits * aValue;
char temp[48];
if( engUnits != 0.0 && fabsl( engUnits ) <= 0.0001 )
{
// printf( "f: " );
sprintf( temp, "%.10f", engUnits );
int len = strlen( temp );
while( --len > 0 && temp[len] == '0' )
temp[len] = '\0';
}
else
{
// printf( "g: " );
sprintf( temp, "%.10g", engUnits );
}
return temp;
}
void KICAD_PLUGIN::init( BOARD* aBoard, PROPERTIES* aProperties )
{
NbDraw = NbTrack = NbZone = NbMod = NbNets = -1;
aBoard->m_Status_Pcb = 0;
aBoard->m_NetClasses.Clear();
}
void KICAD_PLUGIN::Save( const wxString* aFileName, BOARD* aBoard, PROPERTIES* aProperties )
{
}
#ifndef KICAD_PLUGIN_H_
#define KICAD_PLUGIN_H_
/*
* This program source code file is part of KiCad, a free EDA CAD application.
*
* Copyright (C) 1992-2011 KiCad Developers, see change_log.txt for contributors.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, you may find one here:
* http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
* or you may search the http://www.gnu.org website for the version 2 license,
* or you may write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
*/
#include <io_mgr.h>
#include <string>
typedef int BIU;
typedef double BFU;
class PCB_TARGET;
class MODULE;
class DRAWSEGMENT;
class NETINFO;
class TEXTE_PCB;
class TRACK;
class NETCLASS;
class ZONE_CONTAINER;
class DIMENSION;
class NETINFO_ITEM;
class KICAD_PLUGIN : public PLUGIN
{
public:
//-----<PLUGIN>---------------------------------------------------------------------
BOARD* Load( const wxString& aFileName, BOARD* aAppendToMe, PROPERTIES* aProperties = NULL );
void Save( const wxString* aFileName, BOARD* aBoard, PROPERTIES* aProperties = NULL );
const wxString& Name()
{
static const wxString name = wxT( "KiCad" );
return name;
}
//-----</PLUGIN>--------------------------------------------------------------------
protected:
wxString m_Error; ///< for throwing exceptions
LINE_READER* m_Reader; ///< no ownership here.
/// initialize PLUGIN like a constructor would, and futz with fresh BOARD if needed.
void init( BOARD* board, PROPERTIES* aProperties );
int NbDraw;
int NbTrack;
int NbZone;
int NbMod;
int NbNets;
BFU biuToDisk; ///< convert from BIUs to disk engineering units with this scale factor
BFU diskToBiu; ///< convert from disk engineering units to BIUs with this scale factor
/// convert a BIU to engineering units by scaling and formatting to ASCII.
std::string biuFmt( BIU aValue );
// load / parse functions
void loadGeneral( BOARD* me );
void loadSetup( BOARD* me );
void loadSheet( BOARD* me );
void load( PCB_TARGET* me );
void load( MODULE* me );
void load( DRAWSEGMENT* me );
void load( NETINFO* me );
void load( TEXTE_PCB* me );
void load( TRACK* me );
void load( NETCLASS* me );
void load( ZONE_CONTAINER* me );
void load( DIMENSION* me );
void load( NETINFO_ITEM* me );
// void load( SEGZONE* me );
};
#endif // KICAD_PLUGIN_H_
......@@ -155,7 +155,7 @@ FOOTPRINT_EDIT_FRAME::FOOTPRINT_EDIT_FRAME( wxWindow* father,
UpdateTitle();
if( g_ModuleEditor_Pcb == NULL )
g_ModuleEditor_Pcb = new BOARD( NULL, this );
g_ModuleEditor_Pcb = new BOARD( this );
SetBoard( g_ModuleEditor_Pcb );
GetBoard()->m_PcbFrame = this;
......
......@@ -283,7 +283,7 @@ PCB_EDIT_FRAME::PCB_EDIT_FRAME( wxWindow* parent, const wxString& title,
for ( int i = 0; i < 10; i++ )
m_Macros[i].m_Record.clear();
SetBoard( new BOARD( NULL, this ) );
SetBoard( new BOARD( this ) );
// Create the PCB_LAYER_WIDGET *after* SetBoard():
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment