Commit 19a87ac7 authored by Maciej Suminski's avatar Maciej Suminski

Added EC_CONVERGING for zone areas modification.

parent d6c1670c
...@@ -26,8 +26,7 @@ ...@@ -26,8 +26,7 @@
#include "edit_points.h" #include "edit_points.h"
#include <gal/graphics_abstraction_layer.h> #include <gal/graphics_abstraction_layer.h>
#include <geometry/seg.h>
#include <class_drawsegment.h>
bool EDIT_POINT::WithinPoint( const VECTOR2I& aPoint, unsigned int aSize ) const bool EDIT_POINT::WithinPoint( const VECTOR2I& aPoint, unsigned int aSize ) const
{ {
...@@ -205,3 +204,89 @@ void EC_CIRCLE::Apply() ...@@ -205,3 +204,89 @@ void EC_CIRCLE::Apply()
m_constrained.SetPosition( m_center.GetPosition() + newLine ); m_constrained.SetPosition( m_center.GetPosition() + newLine );
} }
EC_CONVERGING::EC_CONVERGING( EDIT_LINE& aLine, EDIT_POINTS& aPoints ) :
EDIT_CONSTRAINT<EDIT_POINT>( aLine.GetEnd() ),
/*m_end( aLine.GetEnd() ), m_origin( aLine.GetOrigin() ),*/ m_line( aLine ),
m_editPoints( aPoints )
{
// Dragged segment endings
EDIT_POINT& origin = aLine.GetOrigin();
EDIT_POINT& end = aLine.GetEnd();
// Add constraint to the line origin, so it moves only along it current line
EDIT_POINT& prevOrigin = *aPoints.Previous( origin );
EDIT_POINT& nextEnd = *aPoints.Next( end );
// Constraints for segments adjacent to the dragged one
m_originSideConstraint = new EC_LINE( origin, prevOrigin );
m_endSideConstraint = new EC_LINE( end, nextEnd );
// Compute dragged segment slope
VECTOR2D delta = m_line.GetPosition() - end.GetPosition();
m_coefA = delta.y / delta.x;
}
EC_CONVERGING::~EC_CONVERGING()
{
delete m_originSideConstraint;
delete m_endSideConstraint;
}
void EC_CONVERGING::Apply()
{
EDIT_POINT& origin = m_line.GetOrigin();
EDIT_POINT& end = m_line.GetEnd();
// Do not allow points on the adjacent segments move freely
m_originSideConstraint->Apply();
m_endSideConstraint->Apply();
// Find points that make adjacent segments
EDIT_POINT& prevOrigin = *m_editPoints.Previous( origin ); // point previous to origin
EDIT_POINT& nextEnd = *m_editPoints.Next( end ); // point next to end
// Two segments adjacent to the dragged segment
SEG originSide( origin.GetPosition(), prevOrigin.GetPosition() );
SEG endSide( end.GetPosition(), nextEnd.GetPosition() );
VECTOR2I draggedCenter; // center point of the dragged segment
// Check if adjacent segments intersect (did we dragged the line to the point that it may
// create a selfintersecting polygon?)
if( OPT_VECTOR2I originEndIntersect = endSide.Intersect( originSide ) )
draggedCenter = *originEndIntersect;
else
draggedCenter = m_line.GetPosition();
// Line B coefficient (y=Ax+B) for the dragged segment (A coefficient is computed up on the
// the construction of EC_CONVERGING
double coefB = draggedCenter.y - m_coefA * draggedCenter.x;
VECTOR2D draggedEnd = draggedCenter + 10000;
if( std::isfinite( m_coefA ) )
{
if( std::abs( m_coefA ) < 1 )
draggedEnd.y = m_coefA * draggedEnd.x + coefB;
else
draggedEnd.x = ( draggedEnd.y - coefB ) / m_coefA;
}
else // vertical line
{
draggedEnd.x = draggedCenter.x;
draggedEnd.y = draggedEnd.x + coefB;
}
SEG dragged( draggedCenter, draggedEnd ); // the dragged segment
// First intersection point (dragged segment against origin side)
if( OPT_VECTOR2I originIntersect = dragged.IntersectLines( originSide ) )
origin.SetPosition( *originIntersect );
// Second intersection point (dragged segment against end side)
if( OPT_VECTOR2I endIntersect = dragged.IntersectLines( endSide ) )
end.SetPosition( *endIntersect );
}
...@@ -579,4 +579,29 @@ private: ...@@ -579,4 +579,29 @@ private:
const EDIT_POINT& m_end; const EDIT_POINT& m_end;
}; };
/**
* Class EC_CONVERGING
*
* EDIT_CONSTRAINT for 3 segment: dragged and two adjacent ones, enforcing to keep their slopes
* and allows only to change ending points. Applied to zones.
*/
class EC_CONVERGING : public EDIT_CONSTRAINT<EDIT_POINT>
{
public:
EC_CONVERGING( EDIT_LINE& aLine, EDIT_POINTS& aPoints );
virtual ~EC_CONVERGING();
///> @copydoc EDIT_CONSTRAINT::Apply()
virtual void Apply();
private:
EC_LINE* m_originSideConstraint; ///< Constraint for origin side segment
EC_LINE* m_endSideConstraint; ///< Constraint for end side segment
EDIT_LINE& m_line; ///< Dragged segment
EDIT_POINTS& m_editPoints; ///< EDIT_POINT instance storing modified lines
double m_coefA; ///< Original dragged segment A coefficient (y = Ax + B)
};
#endif /* EDIT_POINTS_H_ */ #endif /* EDIT_POINTS_H_ */
...@@ -135,7 +135,7 @@ private: ...@@ -135,7 +135,7 @@ private:
POINT_EDITOR::POINT_EDITOR() : POINT_EDITOR::POINT_EDITOR() :
TOOL_INTERACTIVE( "pcbnew.PointEditor" ), m_selectionTool( NULL ), m_dragPoint( NULL ), TOOL_INTERACTIVE( "pcbnew.PointEditor" ), m_selectionTool( NULL ), m_dragPoint( NULL ),
m_original( VECTOR2I( 0, 0 ) ) m_original( VECTOR2I( 0, 0 ) ), m_altConstrainer( VECTOR2I( 0, 0 ) )
{ {
} }
...@@ -143,6 +143,7 @@ POINT_EDITOR::POINT_EDITOR() : ...@@ -143,6 +143,7 @@ POINT_EDITOR::POINT_EDITOR() :
void POINT_EDITOR::Reset( RESET_REASON aReason ) void POINT_EDITOR::Reset( RESET_REASON aReason )
{ {
m_editPoints.reset(); m_editPoints.reset();
m_altConstraint.reset();
} }
...@@ -175,8 +176,6 @@ int POINT_EDITOR::OnSelectionChange( TOOL_EVENT& aEvent ) ...@@ -175,8 +176,6 @@ int POINT_EDITOR::OnSelectionChange( TOOL_EVENT& aEvent )
KIGFX::VIEW* view = getView(); KIGFX::VIEW* view = getView();
PCB_EDIT_FRAME* editFrame = getEditFrame<PCB_EDIT_FRAME>(); PCB_EDIT_FRAME* editFrame = getEditFrame<PCB_EDIT_FRAME>();
EDA_ITEM* item = selection.items.GetPickedItem( 0 ); EDA_ITEM* item = selection.items.GetPickedItem( 0 );
EDIT_POINT constrainer( VECTOR2I( 0, 0 ) );
boost::shared_ptr<EDIT_CONSTRAINT<EDIT_POINT> > degree45Constraint;
m_editPoints = EDIT_POINTS_FACTORY::Make( item ); m_editPoints = EDIT_POINTS_FACTORY::Make( item );
if( !m_editPoints ) if( !m_editPoints )
...@@ -237,24 +236,14 @@ int POINT_EDITOR::OnSelectionChange( TOOL_EVENT& aEvent ) ...@@ -237,24 +236,14 @@ int POINT_EDITOR::OnSelectionChange( TOOL_EVENT& aEvent )
modified = true; modified = true;
} }
if( !!evt->Modifier( MD_CTRL ) != (bool) degree45Constraint ) // 45 degrees mode bool enableAltConstraint = !!evt->Modifier( MD_CTRL );
{ if( enableAltConstraint != (bool) m_altConstraint ) // alternative constraint
if( !degree45Constraint ) setAltConstraint( enableAltConstraint );
{
// Find a proper constraining point for 45 degrees mode
constrainer = get45DegConstrainer();
degree45Constraint.reset( new EC_45DEGREE( *m_dragPoint, constrainer ) );
}
else
{
degree45Constraint.reset();
}
}
m_dragPoint->SetPosition( controls->GetCursorPosition() ); m_dragPoint->SetPosition( controls->GetCursorPosition() );
if( degree45Constraint ) if( m_altConstraint )
degree45Constraint->Apply(); m_altConstraint->Apply();
else else
m_dragPoint->ApplyConstraint(); m_dragPoint->ApplyConstraint();
...@@ -271,7 +260,7 @@ int POINT_EDITOR::OnSelectionChange( TOOL_EVENT& aEvent ) ...@@ -271,7 +260,7 @@ int POINT_EDITOR::OnSelectionChange( TOOL_EVENT& aEvent )
else if( evt->IsMouseUp( BUT_LEFT ) ) else if( evt->IsMouseUp( BUT_LEFT ) )
{ {
degree45Constraint.reset(); setAltConstraint( false );
modified = false; modified = false;
} }
...@@ -540,6 +529,32 @@ void POINT_EDITOR::updatePoints() const ...@@ -540,6 +529,32 @@ void POINT_EDITOR::updatePoints() const
} }
void POINT_EDITOR::setAltConstraint( bool aEnabled )
{
if( aEnabled )
{
EDIT_LINE* line = dynamic_cast<EDIT_LINE*>( m_dragPoint );
if( line )
{
if( m_editPoints->GetParent()->Type() == PCB_ZONE_AREA_T )
{
m_altConstraint.reset( new EC_CONVERGING( *line, *m_editPoints ) );
}
}
else
{
// Find a proper constraining point for 45 degrees mode
m_altConstrainer = get45DegConstrainer();
m_altConstraint.reset( new EC_45DEGREE( *m_dragPoint, m_altConstrainer ) );
}
}
else
{
m_altConstraint.reset();
}
}
EDIT_POINT POINT_EDITOR::get45DegConstrainer() const EDIT_POINT POINT_EDITOR::get45DegConstrainer() const
{ {
EDA_ITEM* item = m_editPoints->GetParent(); EDA_ITEM* item = m_editPoints->GetParent();
......
...@@ -68,6 +68,12 @@ private: ...@@ -68,6 +68,12 @@ private:
///> Currently available edit points. ///> Currently available edit points.
boost::shared_ptr<EDIT_POINTS> m_editPoints; boost::shared_ptr<EDIT_POINTS> m_editPoints;
// Alternative constraint, enabled while a modifier key is held
boost::shared_ptr<EDIT_CONSTRAINT<EDIT_POINT> > m_altConstraint;
// EDIT_POINT for alternative constraint mode
EDIT_POINT m_altConstrainer;
///> Updates item's points with edit points. ///> Updates item's points with edit points.
void updateItem() const; void updateItem() const;
...@@ -83,6 +89,9 @@ private: ...@@ -83,6 +89,9 @@ private:
return m_dragPoint == &aPoint; return m_dragPoint == &aPoint;
} }
///> Sets up an alternative constraint (typically enabled upon a modifier key being pressed).
void setAltConstraint( bool aEnabled );
///> Returns a point that should be used as a constrainer for 45 degrees mode. ///> Returns a point that should be used as a constrainer for 45 degrees mode.
EDIT_POINT get45DegConstrainer() const; EDIT_POINT get45DegConstrainer() const;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment