DRC: added test pads to holes (pcbnew). Others minor changes

CHANGELOG.txt

@@ -5,6 +5,14 @@ Started 2007-June-11
 Please add newer entries at the top, list the date and your name with
 email address.
 
+2009-mar-16 UPDATE Jean-Pierre Charras <jean-pierre.charras@inpg.fr>
+================================================================================
+++pcbnew:
+    in DRC: added test pads to holes.
+
+++Al:
+    minor changes.
+
 
 2009-mar-16 UPDATE Jean-Pierre Charras <jean-pierre.charras@inpg.fr>
 ================================================================================

common/gestfich.cpp

@@ -198,7 +198,9 @@ wxString MakeFileName( const wxString& dir,
     {
         if( !wxIsAbsolutePath( shortname ) )
         {
-            if( !shortname.StartsWith( wxT( "./" ) ) && !shortname.StartsWith( wxT( "../" ) ) )
+            if( !shortname.StartsWith( wxT( "./" ) ) && !shortname.StartsWith( wxT( "../" ) )            // under unix
+                && !shortname.StartsWith( wxT( ".\\" ) ) && !shortname.StartsWith( wxT( "..\\" ) ))      // under Windows
+
             {   /* no absolute path in shortname, add dir to shortname */
                 fullfilename = dir;
             }

eeschema/dialog_edit_component_in_schematic.fbp

@@ -190,7 +190,7 @@
                                                 <property name="name">orientationRadioBox</property>
                                                 <property name="permission">protected</property>
                                                 <property name="pos"></property>
-                                                <property name="selection">3</property>
+                                                <property name="selection">0</property>
                                                 <property name="size"></property>
                                                 <property name="style">wxRA_SPECIFY_COLS</property>
                                                 <property name="subclass"></property>
@@ -255,7 +255,7 @@
                                                 <property name="name">mirrorRadioBox</property>
                                                 <property name="permission">protected</property>
                                                 <property name="pos"></property>
-                                                <property name="selection">2</property>
+                                                <property name="selection">0</property>
                                                 <property name="size"></property>
                                                 <property name="style">wxRA_SPECIFY_COLS</property>
                                                 <property name="subclass"></property>
@@ -872,7 +872,7 @@
                                                         <property name="name">m_StyleRadioBox</property>
                                                         <property name="permission">protected</property>
                                                         <property name="pos"></property>
-                                                        <property name="selection">3</property>
+                                                        <property name="selection">0</property>
                                                         <property name="size"></property>
                                                         <property name="style">wxRA_SPECIFY_COLS</property>
                                                         <property name="subclass"></property>

eeschema/dialog_edit_component_in_schematic_fbp.cpp

@@ -39,7 +39,7 @@ DIALOG_EDIT_COMPONENT_IN_SCHEMATIC_FBP::DIALOG_EDIT_COMPONENT_IN_SCHEMATIC_FBP(
 	wxString orientationRadioBoxChoices[] = { _("0"), _("+90"), _("180"), _("-90") };
 	int orientationRadioBoxNChoices = sizeof( orientationRadioBoxChoices ) / sizeof( wxString );
 	orientationRadioBox = new wxRadioBox( this, wxID_ANY, _("Orientation (Degrees)"), wxDefaultPosition, wxDefaultSize, orientationRadioBoxNChoices, orientationRadioBoxChoices, 1, wxRA_SPECIFY_COLS );
-	orientationRadioBox->SetSelection( 3 );
+	orientationRadioBox->SetSelection( 0 );
 	orientationRadioBox->SetToolTip( _("Select if the component is to be rotated when drawn") );
 	
 	orientationSizer->Add( orientationRadioBox, 1, wxALL, 8 );
@@ -52,7 +52,7 @@ DIALOG_EDIT_COMPONENT_IN_SCHEMATIC_FBP::DIALOG_EDIT_COMPONENT_IN_SCHEMATIC_FBP(
 	wxString mirrorRadioBoxChoices[] = { _("Normal"), _("Mirror ---"), _("Mirror |") };
 	int mirrorRadioBoxNChoices = sizeof( mirrorRadioBoxChoices ) / sizeof( wxString );
 	mirrorRadioBox = new wxRadioBox( this, wxID_ANY, _("Mirror"), wxDefaultPosition, wxDefaultSize, mirrorRadioBoxNChoices, mirrorRadioBoxChoices, 1, wxRA_SPECIFY_COLS );
-	mirrorRadioBox->SetSelection( 2 );
+	mirrorRadioBox->SetSelection( 0 );
 	mirrorRadioBox->SetToolTip( _("Pick the graphical transformation to be used when displaying the component, if any") );
 	
 	mirrorSizer->Add( mirrorRadioBox, 1, wxALL, 8 );
@@ -134,7 +134,7 @@ DIALOG_EDIT_COMPONENT_IN_SCHEMATIC_FBP::DIALOG_EDIT_COMPONENT_IN_SCHEMATIC_FBP(
 	wxString m_StyleRadioBoxChoices[] = { _("Normal"), _("Italic"), _("Bold"), _("Bold Italic") };
 	int m_StyleRadioBoxNChoices = sizeof( m_StyleRadioBoxChoices ) / sizeof( wxString );
 	m_StyleRadioBox = new wxRadioBox( this, wxID_ANY, _("Style:"), wxDefaultPosition, wxDefaultSize, m_StyleRadioBoxNChoices, m_StyleRadioBoxChoices, 1, wxRA_SPECIFY_COLS );
-	m_StyleRadioBox->SetSelection( 3 );
+	m_StyleRadioBox->SetSelection( 0 );
 	m_StyleRadioBox->SetToolTip( _("The style of the currently selected field's text in the schemati") );
 	
 	visibilitySizer->Add( m_StyleRadioBox, 1, wxBOTTOM|wxRIGHT|wxLEFT, 5 );

include/build_version.h

@@ -3,7 +3,7 @@
 #ifndef KICAD_BUILD_VERSION
 #define KICAD_BUILD_VERSION
 
-#define BUILD_VERSION wxT("(20090216-final)")
+#define BUILD_VERSION wxT("(20090332-unstable)")
 
 COMMON_GLOBL wxString g_BuildVersion
 #ifdef EDA_BASE

pcbnew/class_drc_item.cpp

@@ -73,6 +73,10 @@ wxString DRC_ITEM::GetErrorText() const
         return wxString( _("Copper areas intersect or are too close"));
     case DRCE_NON_EXISTANT_NET_FOR_ZONE_OUTLINE:
         return wxString( _("Copper area has a non existent net name"));
+    case DRCE_HOLE_NEAR_PAD:
+        return wxString( _("Hole near pad"));
+    case DRCE_HOLE_NEAR_TRACK:
+        return wxString( _("Hole near track"));
 
 
     default:

pcbnew/class_pad.h

@@ -79,6 +79,7 @@ public:
      * @return const wxString * , a pointer to the full netname
      */
     wxString GetNetname() const { return m_Netname; }
+
     /**
      * Function GetShortNetname
      * @return const wxString * , a pointer to the short netname
@@ -89,13 +90,13 @@ public:
      * Function SetNetname
      * @param const wxString : the new netname
      */
-    void SetNetname( const wxString & aNetname );
+    void SetNetname( const wxString& aNetname );
 
     /**
      * Function GetShape
      * @return the shape of this pad.
      */
-    int GetShape( ) { return (m_PadShape & 0xFF); }
+    int GetShape() { return m_PadShape & 0xFF;  }
 
     /**
      * Function GetPosition
@@ -113,6 +114,7 @@ public:
         m_Pos = aPos;
     }
 
+
     /* Reading and writing data on files */
     int           ReadDescr( FILE* File, int* LineNum = NULL );
 
@@ -202,7 +204,7 @@ public:
     static int Compare( const D_PAD* padref, const D_PAD* padcmp );
 
 
-#if defined (DEBUG)
+#if defined(DEBUG)
 
     /**
      * Function Show
@@ -216,4 +218,4 @@ public:
 #endif
 };
 
-typedef class D_PAD * LISTE_PAD;
+typedef class D_PAD* LISTE_PAD;

pcbnew/class_pad_draw_functions.cpp

@@ -362,8 +362,8 @@ void D_PAD::Draw( WinEDA_DrawPanel* panel, wxDC* DC, int draw_mode, const wxPoin
             }
             RotatePoint( &delta_cx, &delta_cy, angle );
 
-            GRFillCSegm( &panel->m_ClipBox, DC, ux0 + delta_cx, uy0 + delta_cy,
-                ux0 - delta_cx, uy0 - delta_cy,
+            GRFillCSegm( &panel->m_ClipBox, DC, cx0 + delta_cx, cy0 + delta_cy,
+                cx0 - delta_cx, cy0 - delta_cy,
                 rotdx, color );
             break;
 

pcbnew/drc.cpp

@@ -74,7 +74,7 @@ void DRC::ShowDialog()
     else
         updatePointers();
 
-    m_ui->Show(true);
+    m_ui->Show( true );
 }
 
 
@@ -132,13 +132,15 @@ DRC::DRC( WinEDA_PcbFrame* aPcbWindow )
     m_drawPanel = 0;
 }
 
+
 DRC::~DRC()
 {
     // maybe someday look at pointainer.h  <- google for "pointainer.h"
-    for( unsigned i=0; i<m_unconnected.size();  ++i )
+    for( unsigned i = 0; i<m_unconnected.size();  ++i )
         delete m_unconnected[i];
 }
 
+
 /*********************************************/
 int DRC::Drc( TRACK* aRefSegm, TRACK* aList )
 /*********************************************/
@@ -158,8 +160,9 @@ int DRC::Drc( TRACK* aRefSegm, TRACK* aList )
 
 
 /**************************************************************/
-int DRC::Drc( ZONE_CONTAINER * aArea, int CornerIndex )
+int DRC::Drc( ZONE_CONTAINER* aArea, int CornerIndex )
 /*************************************************************/
+
 /**
  * Function Drc
  * tests the outline segment starting at CornerIndex and returns the result and displays the error
@@ -173,7 +176,7 @@ int DRC::Drc( ZONE_CONTAINER * aArea, int CornerIndex )
 {
     updatePointers();
 
-    if( ! doEdgeZoneDrc( aArea, CornerIndex ) )
+    if( !doEdgeZoneDrc( aArea, CornerIndex ) )
     {
         wxASSERT( m_currentMarker );
         m_currentMarker->Display_Infos( m_mainWindow );
@@ -184,7 +187,6 @@ int DRC::Drc( ZONE_CONTAINER * aArea, int CornerIndex )
 }
 
 
-
 void DRC::RunTests()
 {
     // Ensure ratsnest is up to date:
@@ -216,7 +218,6 @@ void DRC::RunTests()
 }
 
 
-
 /***************************************************************/
 void DRC::ListUnconnectedPads()
 /***************************************************************/
@@ -234,7 +235,7 @@ void DRC::updatePointers()
     m_drawPanel = m_mainWindow->DrawPanel;
     m_pcb = m_mainWindow->GetBoard();
 
-    if ( m_ui ) // Use diag list boxes only in DRC dialog
+    if( m_ui )  // Use diag list boxes only in DRC dialog
     {
         m_ui->m_ClearanceListBox->SetList( new DRC_LIST_MARKERS( m_pcb ) );
 
@@ -245,7 +246,7 @@ void DRC::updatePointers()
 
 void DRC::testTracks()
 {
-    for( TRACK* segm = m_pcb->m_Track;  segm && segm->Next();  segm=segm->Next() )
+    for( TRACK* segm = m_pcb->m_Track;  segm && segm->Next();  segm = segm->Next() )
     {
         if( !doTrackDrc( segm, segm->Next(), true ) )
         {
@@ -257,7 +258,9 @@ void DRC::testTracks()
 }
 
 
+/***********************/
 void DRC::testPad2Pad()
+/***********************/
 {
     std::vector<D_PAD*> sortedPads;
 
@@ -266,18 +269,18 @@ void DRC::testPad2Pad()
     // find the max size of the pads (used to stop the test)
     int max_size = 0;
 
-    for( unsigned i=0;  i<sortedPads.size();  ++i )
+    for( unsigned i = 0;  i<sortedPads.size();  ++i )
     {
         D_PAD* pad = sortedPads[i];
 
-        if( pad->m_Rayon > max_size )
+        if( pad->m_Rayon > max_size )       // m_Rayon is the radius value of the circle containing the pad
             max_size = pad->m_Rayon;
     }
 
     // Test the pads
     D_PAD** listEnd = &sortedPads[ sortedPads.size() ];
 
-    for( unsigned i=0;  i<sortedPads.size();  ++i )
+    for( unsigned i = 0;  i<sortedPads.size();  ++i )
     {
         D_PAD* pad = sortedPads[i];
 
@@ -303,7 +306,7 @@ void DRC::testUnconnected()
         return;
 
     CHEVELU* rat = m_pcb->m_Ratsnest;
-    for( int i=0;  i<m_pcb->GetNumRatsnests();  ++i, ++rat )
+    for( int i = 0;  i<m_pcb->GetNumRatsnests();  ++i, ++rat )
     {
         if( (rat->status & CH_ACTIF) == 0 )
             continue;
@@ -312,18 +315,18 @@ void DRC::testUnconnected()
         D_PAD*    padEnd   = rat->pad_end;
 
         DRC_ITEM* uncItem = new DRC_ITEM( DRCE_UNCONNECTED_PADS, padStart->GetPosition(),
-                             padStart->MenuText(m_pcb), padEnd->MenuText(m_pcb),
+                                         padStart->MenuText( m_pcb ), padEnd->MenuText( m_pcb ),
                                          padStart->GetPosition(), padEnd->GetPosition() );
 
         m_unconnected.push_back( uncItem );
     }
 }
 
+
 /**********************************************/
-void DRC::testZones(bool adoTestFillSegments)
+void DRC::testZones( bool adoTestFillSegments )
 /**********************************************/
 {
-
     // Test copper areas for valide netcodes
     // if a netcode is < 0 the netname was not found when reading a netlist
     // if a netcode is == 0 the netname is void, and the zone is not connected.
@@ -331,7 +334,7 @@ void DRC::testZones(bool adoTestFillSegments)
     for( int ii = 0; ii < m_pcb->GetAreaCount(); ii++ )
     {
         ZONE_CONTAINER* Area_To_Test = m_pcb->GetArea( ii );
-        if( ! Area_To_Test->IsOnCopperLayer() )
+        if( !Area_To_Test->IsOnCopperLayer() )
             continue;
         if( Area_To_Test->GetNet() < 0 )
         {
@@ -417,7 +420,7 @@ MARKER* DRC::fillMarker( TRACK* aTrack, BOARD_ITEM* aItem, int aErrorCode, MARKE
 
     if( fillMe )
     {
-        if ( aItem )
+        if( aItem )
             fillMe->SetData( aErrorCode, position,
                              textA, aTrack->GetPosition(),
                              textB, posB );
@@ -427,7 +430,7 @@ MARKER* DRC::fillMarker( TRACK* aTrack, BOARD_ITEM* aItem, int aErrorCode, MARKE
     }
     else
     {
-        if ( aItem )
+        if( aItem )
             fillMe = new MARKER( aErrorCode, position,
                                  textA, aTrack->GetPosition(),
                                  textB, posB );
@@ -456,7 +459,8 @@ MARKER* DRC::fillMarker( D_PAD* aPad, D_PAD* bPad, int aErrorCode, MARKER* fillM
     return fillMe;
 }
 
-MARKER* DRC::fillMarker( ZONE_CONTAINER * aArea, int aErrorCode, MARKER* fillMe )
+
+MARKER* DRC::fillMarker( ZONE_CONTAINER* aArea, int aErrorCode, MARKER* fillMe )
 {
     wxString textA = aArea->MenuText( m_pcb );
 
@@ -471,7 +475,10 @@ MARKER* DRC::fillMarker( ZONE_CONTAINER * aArea, int aErrorCode, MARKER* fillMe
 }
 
 
-MARKER* DRC::fillMarker( const ZONE_CONTAINER * aArea, const wxPoint & aPos, int aErrorCode, MARKER* fillMe )
+MARKER* DRC::fillMarker( const ZONE_CONTAINER* aArea,
+                         const wxPoint&        aPos,
+                         int                   aErrorCode,
+                         MARKER*               fillMe )
 {
     wxString textA = aArea->MenuText( m_pcb );
 
@@ -515,41 +522,38 @@ bool DRC::doTrackDrc( TRACK* aRefSeg, TRACK* aStart, bool testPads )
     if( aRefSeg->Type() == TYPE_VIA )
     {
         // test if via's hole is bigger than its diameter
-        // This test seems necessary since the dialog box that displays the
-        // desired via hole size and width does not enforce a hole size smaller
-        // than the via's diameter.
+        // This test is necessary since the via hole size and width can be modified
+        // and an default via hole can be bigger than some vias sizes
         if( aRefSeg->GetDrillValue() > aRefSeg->m_Width )
         {
-#if 0       // a temporary way to fix a bad board here, change for your values
-            if( aRefSeg->GetDrillValue()==120 && aRefSeg->m_Width==100 )
-                aRefSeg->m_Width = 180;
-#else
             m_currentMarker = fillMarker( aRefSeg, NULL,
                                           DRCE_VIA_HOLE_BIGGER, m_currentMarker );
             return false;
-#endif
         }
 
-        // For microvias: test if they are blindvias and only between 2 layers
+        // For microvias: test if they are blind vias and only between 2 layers
         // because they are used for very small drill size and are drill by laser
         // and **only** one layer can be drilled
         if( aRefSeg->Shape() == VIA_MICROVIA )
         {
             int  layer1, layer2;
             bool err = true;
-            ((SEGVIA*)aRefSeg)->ReturnLayerPair(&layer1, &layer2);
-            if (layer1> layer2 ) EXCHG(layer1,layer2);
+            ( (SEGVIA*) aRefSeg )->ReturnLayerPair( &layer1, &layer2 );
+            if( layer1> layer2 )
+                EXCHG( layer1, layer2 );
+
             // test:
-            if (layer1 == COPPER_LAYER_N && layer2 == LAYER_N_2 ) err = false;
-            if (layer1 == (g_DesignSettings.m_CopperLayerCount - 2 ) && layer2 == LAYER_CMP_N ) err = false;
-            if ( err )
+            if( layer1 == COPPER_LAYER_N && layer2 == LAYER_N_2 )
+                err = false;
+            if( layer1 == (g_DesignSettings.m_CopperLayerCount - 2 ) && layer2 == LAYER_CMP_N )
+                err = false;
+            if( err )
             {
                 m_currentMarker = fillMarker( aRefSeg, NULL,
                                               DRCE_MICRO_VIA_INCORRECT_LAYER_PAIR, m_currentMarker );
                 return false;
             }
         }
-
     }
 
     // for a non horizontal or vertical segment Compute the segment angle
@@ -577,7 +581,7 @@ bool DRC::doTrackDrc( TRACK* aRefSeg, TRACK* aStart, bool testPads )
 
     if( testPads )
     {
-        for( unsigned ii=0;  ii<m_pcb->m_Pads.size();  ++ii )
+        for( unsigned ii = 0;  ii<m_pcb->m_Pads.size();  ++ii )
         {
             D_PAD* pad = m_pcb->m_Pads[ii];
 
@@ -615,8 +619,8 @@ bool DRC::doTrackDrc( TRACK* aRefSeg, TRACK* aStart, bool testPads )
             /* The pad must be in a net (i.e pt_pad->GetNet() != 0 )
              * but no problem if the pad netcode is the current netcode (same net)
              */
-            if( pad->GetNet() &&	// the pad must be connected
-                net_code_ref == pad->GetNet() )	// the pad net is the same as current net -> Ok
+            if( pad->GetNet()                       // the pad must be connected
+               && net_code_ref == pad->GetNet() )   // the pad net is the same as current net -> Ok
                 continue;
 
             // DRC for the pad
@@ -639,7 +643,7 @@ bool DRC::doTrackDrc( TRACK* aRefSeg, TRACK* aStart, bool testPads )
     // At this point the reference segment is the X axis
 
     // Test the reference segment with other track segments
-    for( track=aStart;  track;  track=track->Next() )
+    for( track = aStart;  track;  track = track->Next() )
     {
         // coord des extremites du segment teste dans le repere modifie
         int x0;
@@ -897,7 +901,12 @@ bool DRC::doPadToPadsDrc( D_PAD* aRefPad, LISTE_PAD* aStart, LISTE_PAD* aEnd,
     int          x_limite = max_size + g_DesignSettings.m_TrackClearence +
                             aRefPad->m_Rayon + aRefPad->GetPosition().x;
 
-    for(  LISTE_PAD* pad_list=aStart;  pad_list<aEnd;  ++pad_list )
+    static D_PAD dummypad( (MODULE*) NULL );       // used to test DRC pad to holes: this dummypad is the hole to test
+
+    dummypad.m_Masque_Layer = ALL_CU_LAYERS;
+
+
+    for(  LISTE_PAD* pad_list = aStart;  pad_list<aEnd;  ++pad_list )
     {
         D_PAD* pad = *pad_list;
         if( pad == aRefPad )
@@ -908,18 +917,66 @@ bool DRC::doPadToPadsDrc( D_PAD* aRefPad, LISTE_PAD* aStart, LISTE_PAD* aEnd,
         if( pad->m_Pos.x > x_limite )
             break;
 
-        /* No probleme if pads are on different copper layers */
+
+        /* No problem if pads are on different copper layers,
+         * but their hole (if any ) can create RDC error because they are on all copper layers, so we test them
+        */
         if( (pad->m_Masque_Layer & layerMask ) == 0 )
+        {
+            /* if holes are in the same location and have the same size and shape, this can be accepted */
+            if( pad->GetPosition() == aRefPad->GetPosition()
+                && pad->m_Drill == aRefPad->m_Drill
+                && pad->m_DrillShape == aRefPad->m_DrillShape )
+            {
+                if( aRefPad->m_DrillShape == PAD_CIRCLE )
+                    continue;
+                if( pad->m_Orient == aRefPad->m_Orient )    // for oval holes: must also have the same orientation
+                    continue;
+            }
+
+            /* Here, we must test clearance between holes and pads
+             * dummypad size and shape is adjusted to pad drill size and shape
+             */
+            if( pad->m_Drill.x ) // pad under testing has a hole, test this hole against pad reference
+            {
+                dummypad.SetPosition(  pad->GetPosition() );
+                dummypad.m_Size     = pad->m_Drill;
+                dummypad.m_PadShape = pad->m_DrillShape == PAD_OVAL ? PAD_OVAL : PAD_CIRCLE;
+                dummypad.m_Orient   = pad->m_Orient;
+                if( !checkClearancePadToPad( aRefPad, &dummypad, g_DesignSettings.m_TrackClearence ) )
+                {
+                    // here we have a drc error on pad!
+                    m_currentMarker = fillMarker( pad, aRefPad,
+                                                  DRCE_HOLE_NEAR_PAD, m_currentMarker );
+                    return false;
+                }
+            }
+            if( aRefPad->m_Drill.x ) // pad reference has a hole
+            {
+                dummypad.SetPosition(  aRefPad->GetPosition() );
+                dummypad.m_Size     = aRefPad->m_Drill;
+                dummypad.m_PadShape = aRefPad->m_DrillShape == PAD_OVAL ? PAD_OVAL : PAD_CIRCLE;
+                dummypad.m_Orient   = aRefPad->m_Orient;
+                if( !checkClearancePadToPad( pad, &dummypad, g_DesignSettings.m_TrackClearence ) )
+                {
+                    // here we have a drc erroron aRefPad!
+                    m_currentMarker = fillMarker( aRefPad, pad,
+                                                  DRCE_HOLE_NEAR_PAD, m_currentMarker );
+                    return false;
+                }
+            }
             continue;
+        }
 
         /* The pad must be in a net (i.e pt_pad->GetNet() != 0 ),
          *  But no problem if pads have the same netcode (same net)*/
-        if( pad->GetNet() && (aRefPad->GetNet() == pad->GetNet()) )
+        if( pad->GetNet() && ( aRefPad->GetNet() == pad->GetNet() ) )
             continue;
 
         /* No problem if pads are from the same footprint
          *  and have the same pad number ( equivalent pads  )  */
-        if( (pad->GetParent() == aRefPad->GetParent()) && (pad->m_NumPadName == aRefPad->m_NumPadName) )
+        if( ( pad->GetParent() == aRefPad->GetParent() )
+           && (pad->m_NumPadName == aRefPad->m_NumPadName) )
             continue;
 
         if( !checkClearancePadToPad( aRefPad, pad, g_DesignSettings.m_TrackClearence ) )
@@ -941,6 +998,7 @@ bool DRC::checkClearancePadToPad( D_PAD* aRefPad, D_PAD* aPad, const int dist_mi
 {
     wxPoint rel_pos;
     int     dist;;
+
     wxPoint shape_pos;
     int     pad_angle;
 
@@ -998,8 +1056,8 @@ bool DRC::checkClearancePadToPad( D_PAD* aRefPad, D_PAD* aPad, const int dist_mi
         if( aPad->m_PadShape == PAD_RECT )
         {
             wxSize size = aPad->m_Size;
-            if( (pad_angle == 0) || (pad_angle == 900) || (pad_angle == 1800) ||
-               (pad_angle == 2700) )
+            if( (pad_angle == 0) || (pad_angle == 900) || (pad_angle == 1800)
+               || (pad_angle == 2700) )
             {
                 if( (pad_angle == 900) || (pad_angle == 2700) )
                 {
@@ -1057,6 +1115,7 @@ bool DRC::checkClearancePadToPad( D_PAD* aRefPad, D_PAD* aPad, const int dist_mi
         break;
     }
 
+    case PAD_TRAPEZOID:
     default:
         /* TODO...*/
         break;
@@ -1227,6 +1286,7 @@ bool DRC::checkClearanceSegmToPad( const D_PAD* pad_to_test, int w_segm, int dis
     return true;
 }
 
+
 /**********************************************************************/
 bool DRC::checkMarginToCircle( int cx, int cy, int radius, int longueur )
 /**********************************************************************/
@@ -1250,7 +1310,6 @@ bool DRC::checkMarginToCircle( int cx, int cy, int radius, int longueur )
 }
 
 
-
 /**********************************************/
 /* int Tst_Ligne(int x1,int y1,int x2,int y2) */
 /**********************************************/
@@ -1363,12 +1422,11 @@ bool DRC::checkLine( int x1, int y1, int x2, int y2 )
         }
     }
 
-    if( ( (x2 + x1)/2 <= m_xcliphi ) && ( (x2 + x1)/2 >= m_xcliplo ) \
-     && ( (y2 + y1)/2 <= m_ycliphi ) && ( (y2 + y1)/2 >= m_ycliplo ) )
+    if( ( (x2 + x1) / 2 <= m_xcliphi ) && ( (x2 + x1) / 2 >= m_xcliplo ) \
+       && ( (y2 + y1) / 2 <= m_ycliphi ) && ( (y2 + y1) / 2 >= m_ycliplo ) )
     {
         return false;
     }
     else
         return true;
 }
-

pcbnew/drc_stuff.h

@@ -58,6 +58,8 @@
 #define COPPERAREA_INSIDE_COPPERAREA        22  ///< copper area outlines intersect
 #define COPPERAREA_CLOSE_TO_COPPERAREA      23  ///< copper area outlines are too close
 #define DRCE_NON_EXISTANT_NET_FOR_ZONE_OUTLINE  24  ///< copper area outline has an incorrect netcode due to a netname not found
+#define DRCE_HOLE_NEAR_PAD                  25  ///< hole too close to pad
+#define DRCE_HOLE_NEAR_TRACK                26  ///< hole too close to track
 
 /**
  * Class DRC_ITEM