Commit 05faa369 authored by Dick Hollenbeck's avatar Dick Hollenbeck

KICAD_PLUG intermediate work, for eventual nanometer boards

parents d9e0ab02 1b5edd6d
...@@ -761,7 +761,7 @@ public: ...@@ -761,7 +761,7 @@ public:
wxString m_Text; /* text! */ wxString m_Text; /* text! */
wxPoint m_Pos; /* XY position of anchor text. */ wxPoint m_Pos; /* XY position of anchor text. */
wxSize m_Size; /* XY size of text */ wxSize m_Size; /* XY size of text */
bool m_Mirror; /* Display Normal / mirror */ bool m_Mirror; ///< true iff mirrored
int m_Attributs; /* flags (visible...) */ int m_Attributs; /* flags (visible...) */
bool m_Italic; /* true to simulate (or use if exists) bool m_Italic; /* true to simulate (or use if exists)
* an italic font... */ * an italic font... */
...@@ -798,6 +798,9 @@ public: ...@@ -798,6 +798,9 @@ public:
void SetItalic( bool isItalic ) { m_Italic = isItalic; } void SetItalic( bool isItalic ) { m_Italic = isItalic; }
bool IsItalic() const { return m_Italic; } bool IsItalic() const { return m_Italic; }
void SetMirrored( bool doMirror ) { m_Mirror = doMirror; }
bool IsMirrored() const { return m_Mirror; }
/** /**
* Function SetSize * Function SetSize
* sets text size. * sets text size.
......
...@@ -16,15 +16,20 @@ class BOARD; ...@@ -16,15 +16,20 @@ class BOARD;
class EDA_DRAW_PANEL; class EDA_DRAW_PANEL;
/* Shapes for segments (graphic segments and tracks) ( .m_Shape member ) */ /**
enum Track_Shapes { * Enum STROKE_T
S_SEGMENT = 0, /* usual segment : line with rounded ends */ * is the set of shapes for segments (graphic segments and tracks) which are often
S_RECT, /* segment with non rounded ends */ * in the .m_Shape member
S_ARC, /* Arcs (with rounded ends) */ */
S_CIRCLE, /* ring */ enum STROKE_T
S_POLYGON, /* polygon (not yet used for tracks, but could be in microwave apps) */ {
S_CURVE, /* Bezier Curve */ S_SEGMENT = 0, ///< usual segment : line with rounded ends
S_LAST /* last value for this list */ S_RECT, ///< segment with non rounded ends
S_ARC, ///< Arcs (with rounded ends)
S_CIRCLE, ///< ring
S_POLYGON, ///< polygon (not yet used for tracks, but could be in microwave apps)
S_CURVE, ///< Bezier Curve
S_LAST ///< last value for this list
}; };
...@@ -165,9 +170,9 @@ public: ...@@ -165,9 +170,9 @@ public:
/** /**
* Function ShowShape * Function ShowShape
* converts the enum Track_Shapes integer value to a wxString. * converts the enum STROKE_T integer value to a wxString.
*/ */
static wxString ShowShape( Track_Shapes aShape ); static wxString ShowShape( STROKE_T aShape );
/** /**
* Function Save * Function Save
......
...@@ -10,7 +10,7 @@ ...@@ -10,7 +10,7 @@
#include "class_board.h" #include "class_board.h"
wxString BOARD_ITEM::ShowShape( Track_Shapes aShape ) wxString BOARD_ITEM::ShowShape( STROKE_T aShape )
{ {
switch( aShape ) switch( aShape )
{ {
......
...@@ -566,7 +566,7 @@ wxString DRAWSEGMENT::GetSelectMenuText() const ...@@ -566,7 +566,7 @@ wxString DRAWSEGMENT::GetSelectMenuText() const
wxString temp; wxString temp;
text.Printf( _( "Pcb Graphic: %s length: %s on %s" ), text.Printf( _( "Pcb Graphic: %s length: %s on %s" ),
GetChars( ShowShape( (Track_Shapes)m_Shape ) ), GetChars( ShowShape( (STROKE_T) m_Shape ) ),
GetChars( valeur_param( GetLength(), temp ) ), GetChars( valeur_param( GetLength(), temp ) ),
GetChars( GetLayerName() ) ); GetChars( GetLayerName() ) );
......
...@@ -30,10 +30,10 @@ ...@@ -30,10 +30,10 @@
/* class EDGE_MODULE */ /* class EDGE_MODULE */
/*********************/ /*********************/
EDGE_MODULE::EDGE_MODULE( MODULE* parent ) : EDGE_MODULE::EDGE_MODULE( MODULE* parent, STROKE_T aShape ) :
DRAWSEGMENT( parent, PCB_MODULE_EDGE_T ) DRAWSEGMENT( parent, PCB_MODULE_EDGE_T )
{ {
m_Shape = S_SEGMENT; m_Shape = aShape;
m_Angle = 0; m_Angle = 0;
m_Width = 120; m_Width = 120;
} }
...@@ -422,7 +422,7 @@ wxString EDGE_MODULE::GetSelectMenuText() const ...@@ -422,7 +422,7 @@ wxString EDGE_MODULE::GetSelectMenuText() const
{ {
wxString text; wxString text;
text << _( "Graphic" ) << wxT( " " ) << ShowShape( (Track_Shapes) m_Shape ); text << _( "Graphic" ) << wxT( " " ) << ShowShape( (STROKE_T) m_Shape );
text << wxT( " (" ) << GetLayerName() << wxT( ")" ); text << wxT( " (" ) << GetLayerName() << wxT( ")" );
text << _( " of " ) << ( (MODULE*) GetParent() )->GetReference(); text << _( " of " ) << ( (MODULE*) GetParent() )->GetReference();
...@@ -441,7 +441,7 @@ wxString EDGE_MODULE::GetSelectMenuText() const ...@@ -441,7 +441,7 @@ wxString EDGE_MODULE::GetSelectMenuText() const
*/ */
void EDGE_MODULE::Show( int nestLevel, std::ostream& os ) void EDGE_MODULE::Show( int nestLevel, std::ostream& os )
{ {
wxString shape = ShowShape( (Track_Shapes) m_Shape ); wxString shape = ShowShape( (STROKE_T) m_Shape );
// for now, make it look like XML: // for now, make it look like XML:
NestedSpace( nestLevel, os ) << '<' << GetClass().Lower().mb_str() << NestedSpace( nestLevel, os ) << '<' << GetClass().Lower().mb_str() <<
......
...@@ -22,7 +22,7 @@ public: ...@@ -22,7 +22,7 @@ public:
wxPoint m_End0; // End point, relative to module origin, orient 0. wxPoint m_End0; // End point, relative to module origin, orient 0.
public: public:
EDGE_MODULE( MODULE* parent ); EDGE_MODULE( MODULE* parent, STROKE_T aShape = S_SEGMENT );
EDGE_MODULE( EDGE_MODULE* edge ); EDGE_MODULE( EDGE_MODULE* edge );
~EDGE_MODULE(); ~EDGE_MODULE();
......
...@@ -128,7 +128,7 @@ public: ...@@ -128,7 +128,7 @@ public:
void SetPosition( const wxPoint& aPos ) { m_Start = aPos; } // overload void SetPosition( const wxPoint& aPos ) { m_Start = aPos; } // overload
void SetEnd( const wxPoint& aEnd ) { m_Start = aEnd; } void SetEnd( const wxPoint& aEnd ) { m_End = aEnd; }
EDA_RECT GetBoundingBox() const; EDA_RECT GetBoundingBox() const;
......
...@@ -25,18 +25,25 @@ ...@@ -25,18 +25,25 @@
/* /*
This implements loading and saving a BOARD, behind the PLUGIN interface. This implements loading and saving a BOARD, behind the PLUGIN interface.
The philosophy on loading: The philosophies:
*) BIUs should be typed as such to distinguish them from ints. *) a BIU is a unit of length and is nanometers when this work is done, but deci-mils until done.
*) BIUs should be typed as such to distinguish them from ints. This is mostly
for human readability, and having the type nearby in the source supports this readability.
*) Do not assume that BIUs will always be int, doing a sscanf() into a BIU *) Do not assume that BIUs will always be int, doing a sscanf() into a BIU
does not make sense in case the size of the BUI changes. does not make sense in case the size of the BUI changes.
*) variables are put onto the stack in an automatic, even when it might look *) variables are put onto the stack in an automatic, even when it might look
more efficient to do otherwise. This is so we can seem them with a debugger. more efficient to do otherwise. This is so we can seem them with a debugger.
*) Global variables should not be touched from within a PLUGIN, since it will eventually *) Global variables should not be touched from within a PLUGIN, since it will eventually
be in a DLL/DSO. This includes window information too. The PLUGIN API knows be in a DLL/DSO. This includes window information too. The PLUGIN API knows
nothing of wxFrame. nothing of wxFrame or globals.
*) No wxWindowing calls are made in here, since the UI is going to process a bucket *) No wxWindowing calls are made in here, since the UI resides higher up than in here,
of detailed information thrown from here in the form of an exception if an error and is going to process a bucket of detailed information thrown from down here
happens. in the form of an exception if an error happens.
*) Much of what we do in this source file is for human readability, not performance.
Simply avoiding strtok() more often than the old code washes out performance losses.
Remember strncmp() will bail as soon as a mismatch happens, not going all the way
to end of string unless a full match.
*) angles are in the process of migrating to doubles, and 'int' if used, is only shortterm.
*/ */
...@@ -71,10 +78,13 @@ ...@@ -71,10 +78,13 @@
#include <class_dimension.h> #include <class_dimension.h>
#include <class_drawsegment.h> #include <class_drawsegment.h>
#include <class_mire.h> #include <class_mire.h>
#include <class_edge_mod.h>
#include <3d_struct.h> #include <3d_struct.h>
#include <pcb_plot_params.h> #include <pcb_plot_params.h>
#include <drawtxt.h> #include <drawtxt.h>
#include <trigo.h>
/* /*
#include <pcbnew.h> #include <pcbnew.h>
#include <pcbnew_id.h> #include <pcbnew_id.h>
...@@ -144,6 +154,32 @@ ...@@ -144,6 +154,32 @@
#define SZ( x ) (sizeof(x)-1) #define SZ( x ) (sizeof(x)-1)
#if 1
#define READLINE() aReader->ReadLine()
#else
/// The function and macro which follow comprise a shim which can be a
/// monitor on lines of text read in from the input file.
/// And it can be used as a trap.
static inline unsigned ReadLine( LINE_READER* rdr, const char* caller )
{
unsigned ret = rdr->ReadLine();
const char* line = rdr->Line();
printf( "%-6u %s: %s", rdr->LineNumber(), caller, line );
#if 0 // trap
if( !strcmp( "loadSETUP", caller ) && !strcmp( "$EndSETUP\n", line ) )
{
int breakhere = 1;
}
#endif
return ret;
}
#define READLINE() ReadLine( aReader, __FUNCTION__ )
#endif
static const char delims[] = " \t\r\n"; static const char delims[] = " \t\r\n";
using namespace std; // auto_ptr using namespace std; // auto_ptr
...@@ -215,7 +251,7 @@ void KICAD_PLUGIN::loadAllSections( bool doAppend ) ...@@ -215,7 +251,7 @@ void KICAD_PLUGIN::loadAllSections( bool doAppend )
// Then follows $EQUIPOT and all the rest // Then follows $EQUIPOT and all the rest
while( aReader->ReadLine() ) while( READLINE() )
{ {
char* line = aReader->Line(); char* line = aReader->Line();
...@@ -293,7 +329,7 @@ void KICAD_PLUGIN::loadAllSections( bool doAppend ) ...@@ -293,7 +329,7 @@ void KICAD_PLUGIN::loadAllSections( bool doAppend )
} }
else else
{ {
while( aReader->ReadLine() ) while( READLINE() )
{ {
line = aReader->Line(); // gobble til $EndSetup line = aReader->Line(); // gobble til $EndSetup
...@@ -305,6 +341,13 @@ void KICAD_PLUGIN::loadAllSections( bool doAppend ) ...@@ -305,6 +341,13 @@ void KICAD_PLUGIN::loadAllSections( bool doAppend )
else if( TESTLINE( "$EndBOARD" ) ) else if( TESTLINE( "$EndBOARD" ) )
return; // preferred exit return; // preferred exit
/*
else
{
printf( "ignored: '%s'", line );
}
*/
} }
THROW_IO_ERROR( wxT( "Missing '$EndBOARD'" ) ); THROW_IO_ERROR( wxT( "Missing '$EndBOARD'" ) );
...@@ -313,15 +356,12 @@ void KICAD_PLUGIN::loadAllSections( bool doAppend ) ...@@ -313,15 +356,12 @@ void KICAD_PLUGIN::loadAllSections( bool doAppend )
void KICAD_PLUGIN::loadGENERAL() void KICAD_PLUGIN::loadGENERAL()
{ {
while( aReader->ReadLine() ) while( READLINE() )
{ {
char* line = aReader->Line(); char* line = aReader->Line();
const char* data; const char* data;
if( TESTLINE( "$EndGENERAL" ) ) if( TESTLINE( "Units" ) )
return; // preferred exit
else if( TESTLINE( "Units" ) )
{ {
// what are the engineering units of the lengths in the BOARD? // what are the engineering units of the lengths in the BOARD?
data = strtok( line + SZ("Units"), delims ); data = strtok( line + SZ("Units"), delims );
...@@ -395,33 +435,31 @@ void KICAD_PLUGIN::loadGENERAL() ...@@ -395,33 +435,31 @@ void KICAD_PLUGIN::loadGENERAL()
// Read the number of segments of type DRAW, TRACK, ZONE // Read the number of segments of type DRAW, TRACK, ZONE
else if( TESTLINE( "Ndraw" ) ) else if( TESTLINE( "Ndraw" ) )
{ {
data = line + SZ( "Ndraw" ); NbDraw = intParse( line + SZ( "Ndraw" ) );
NbDraw = atoi( data );
} }
else if( TESTLINE( "Ntrack" ) ) else if( TESTLINE( "Ntrack" ) )
{ {
data = line + SZ( "Ntrack" ); NbTrack = intParse( line + SZ( "Ntrack" ) );
NbTrack = atoi( data );
} }
else if( TESTLINE( "Nzone" ) ) else if( TESTLINE( "Nzone" ) )
{ {
data = line + SZ( "Nzone" ); NbZone = intParse( line + SZ( "Nzone" ) );
NbZone = atoi( data );
} }
else if( TESTLINE( "Nmodule" ) ) else if( TESTLINE( "Nmodule" ) )
{ {
data = line + SZ( "Nmodule" ); NbMod = intParse( line + SZ( "Nmodule" ) );
NbMod = atoi( data );
} }
else if( TESTLINE( "Nnets" ) ) else if( TESTLINE( "Nnets" ) )
{ {
data = line + SZ( "Nnets" ); NbNets = intParse( line + SZ( "Nnets" ) );
NbNets = atoi( data );
} }
else if( TESTLINE( "$EndGENERAL" ) )
return; // preferred exit
} }
THROW_IO_ERROR( wxT( "Missing '$EndGENERAL'" ) ); THROW_IO_ERROR( wxT( "Missing '$EndGENERAL'" ) );
...@@ -433,14 +471,11 @@ void KICAD_PLUGIN::loadSHEET() ...@@ -433,14 +471,11 @@ void KICAD_PLUGIN::loadSHEET()
char buf[260]; char buf[260];
char* text; char* text;
while( aReader->ReadLine() ) while( READLINE() )
{ {
char* line = aReader->Line(); char* line = aReader->Line();
if( TESTLINE( "$End" ) ) if( TESTLINE( "Sheet" ) )
return; // preferred exit
else if( TESTLINE( "Sheet" ) )
{ {
text = strtok( line, delims ); text = strtok( line, delims );
text = strtok( NULL, delims ); text = strtok( NULL, delims );
...@@ -450,7 +485,7 @@ void KICAD_PLUGIN::loadSHEET() ...@@ -450,7 +485,7 @@ void KICAD_PLUGIN::loadSHEET()
for( ii = 0; sheet != NULL; ii++, sheet = g_SheetSizeList[ii] ) for( ii = 0; sheet != NULL; ii++, sheet = g_SheetSizeList[ii] )
{ {
if( stricmp( TO_UTF8( sheet->m_Name ), text ) == 0 ) if( !stricmp( TO_UTF8( sheet->m_Name ), text ) )
{ {
// @todo screen->m_CurrentSheetDesc = sheet; // @todo screen->m_CurrentSheetDesc = sheet;
...@@ -522,6 +557,9 @@ void KICAD_PLUGIN::loadSHEET() ...@@ -522,6 +557,9 @@ void KICAD_PLUGIN::loadSHEET()
screen->m_Commentaire4 = FROM_UTF8( buf ); screen->m_Commentaire4 = FROM_UTF8( buf );
#endif #endif
} }
else if( TESTLINE( "$EndSHEETDESCR" ) )
return; // preferred exit
} }
THROW_IO_ERROR( wxT( "Missing '$EndSHEETDESCR'" ) ); THROW_IO_ERROR( wxT( "Missing '$EndSHEETDESCR'" ) );
...@@ -532,7 +570,7 @@ void KICAD_PLUGIN::loadSETUP() ...@@ -532,7 +570,7 @@ void KICAD_PLUGIN::loadSETUP()
{ {
NETCLASS* netclass_default = m_board->m_NetClasses.GetDefault(); NETCLASS* netclass_default = m_board->m_NetClasses.GetDefault();
while( aReader->ReadLine() ) while( READLINE() )
{ {
const char* data; const char* data;
...@@ -559,28 +597,6 @@ void KICAD_PLUGIN::loadSETUP() ...@@ -559,28 +597,6 @@ void KICAD_PLUGIN::loadSETUP()
*/ */
} }
else if( TESTLINE( "$EndSETUP" ) )
{
// Until such time as the *.brd file does not have the
// global parameters:
// "TrackWidth", "TrackMinWidth", "ViaSize", "ViaDrill",
// "ViaMinSize", and "TrackClearence", put those same global
// values into the default NETCLASS until later board load
// code should override them. *.brd files which have been
// saved with knowledge of NETCLASSes will override these
// defaults, old boards will not.
//
// @todo: I expect that at some point we can remove said global
// parameters from the *.brd file since the ones in the
// default netclass serve the same purpose. If needed
// at all, the global defaults should go into a preferences
// file instead so they are there to start new board
// projects.
m_board->m_NetClasses.GetDefault()->SetParams();
return;
}
else if( TESTLINE( "AuxiliaryAxisOrg" ) ) else if( TESTLINE( "AuxiliaryAxisOrg" ) )
{ {
BIU gx = biuParse( line + SZ( "AuxiliaryAxisOrg" ), &data ); BIU gx = biuParse( line + SZ( "AuxiliaryAxisOrg" ), &data );
...@@ -594,7 +610,7 @@ void KICAD_PLUGIN::loadSETUP() ...@@ -594,7 +610,7 @@ void KICAD_PLUGIN::loadSETUP()
#if defined(PCBNEW) #if defined(PCBNEW)
else if( TESTLINE( "Layers" ) == 0 ) else if( TESTLINE( "Layers" ) )
{ {
int tmp = atoi( line + SZ( "Layers" ) ); int tmp = atoi( line + SZ( "Layers" ) );
m_board->SetCopperLayerCount( tmp ); m_board->SetCopperLayerCount( tmp );
...@@ -622,13 +638,13 @@ void KICAD_PLUGIN::loadSETUP() ...@@ -622,13 +638,13 @@ void KICAD_PLUGIN::loadSETUP()
} }
/* no more used /* no more used
else if( TESTLINE( "TrackWidth" ) == 0 ) else if( TESTLINE( "TrackWidth" ) )
{ {
} }
else if( TESTLINE( "ViaSize" ) ) else if( TESTLINE( "ViaSize" ) )
{ {
} }
else if( TESTLINE( "MicroViaSize" ) == 0 ) else if( TESTLINE( "MicroViaSize" ) )
{ {
} }
*/ */
...@@ -812,6 +828,27 @@ void KICAD_PLUGIN::loadSETUP() ...@@ -812,6 +828,27 @@ void KICAD_PLUGIN::loadSETUP()
} }
#endif #endif
else if( TESTLINE( "$EndSETUP" ) )
{
// Until such time as the *.brd file does not have the
// global parameters:
// "TrackWidth", "TrackMinWidth", "ViaSize", "ViaDrill",
// "ViaMinSize", and "TrackClearence", put those same global
// values into the default NETCLASS until later board load
// code should override them. *.brd files which have been
// saved with knowledge of NETCLASSes will override these
// defaults, old boards will not.
//
// @todo: I expect that at some point we can remove said global
// parameters from the *.brd file since the ones in the
// default netclass serve the same purpose. If needed
// at all, the global defaults should go into a preferences
// file instead so they are there to start new board
// projects.
m_board->m_NetClasses.GetDefault()->SetParams();
return; // preferred exit
}
} }
// @todo: this code is currently unreachable, would need a goto, to get here. // @todo: this code is currently unreachable, would need a goto, to get here.
...@@ -848,7 +885,7 @@ void KICAD_PLUGIN::loadMODULE() ...@@ -848,7 +885,7 @@ void KICAD_PLUGIN::loadMODULE()
{ {
auto_ptr<MODULE> module( new MODULE( m_board ) ); auto_ptr<MODULE> module( new MODULE( m_board ) );
while( aReader->ReadLine() ) while( READLINE() )
{ {
const char* data; const char* data;
char* line = aReader->Line(); char* line = aReader->Line();
...@@ -872,10 +909,12 @@ void KICAD_PLUGIN::loadMODULE() ...@@ -872,10 +909,12 @@ void KICAD_PLUGIN::loadMODULE()
loadPAD( module.get() ); loadPAD( module.get() );
} }
// Read a footprint text description (ref, value, or drawing)
else if( TESTLINE( "T" ) ) else if( TESTLINE( "T" ) )
{ {
// Read a footprint text description (ref, value, or drawing) // e.g. "T1 6940 -16220 350 300 900 60 M I 20 N "CFCARD"\r\n"
int tnum = atoi( line + SZ( "T" ) );
int tnum = intParse( line + SZ( "T" ) );
TEXTE_MODULE* textm; TEXTE_MODULE* textm;
...@@ -894,6 +933,8 @@ void KICAD_PLUGIN::loadMODULE() ...@@ -894,6 +933,8 @@ void KICAD_PLUGIN::loadMODULE()
else if( TESTLINE( "Po" ) ) else if( TESTLINE( "Po" ) )
{ {
// e.g. "Po 19120 39260 900 0 4E823D06 46EAAFA5 ~~\r\n"
// sscanf( PtLine, "%d %d %d %d %lX %lX %s", &m_Pos.x, &m_Pos.y, &m_Orient, &m_Layer, &m_LastEdit_Time, &m_TimeStamp, BufCar1 ); // sscanf( PtLine, "%d %d %d %d %lX %lX %s", &m_Pos.x, &m_Pos.y, &m_Orient, &m_Layer, &m_LastEdit_Time, &m_TimeStamp, BufCar1 );
BIU pos_x = biuParse( line + SZ( "Po" ), &data ); BIU pos_x = biuParse( line + SZ( "Po" ), &data );
...@@ -971,13 +1012,14 @@ void KICAD_PLUGIN::loadMODULE() ...@@ -971,13 +1012,14 @@ void KICAD_PLUGIN::loadMODULE()
module->m_Path = FROM_UTF8( data ); module->m_Path = FROM_UTF8( data );
} }
else if( TESTLINE( "SHAPE3D" ) ) else if( TESTLINE( "$SHAPE3D" ) )
{ {
load3D( module.get() ); load3D( module.get() );
} }
else if( TESTLINE( "Cd" ) ) else if( TESTLINE( "Cd" ) )
{ {
// e.g. "Cd Double rangee de contacts 2 x 4 pins\r\n"
module->m_Doc = FROM_UTF8( StrPurge( line + SZ( "Cd" ) ) ); module->m_Doc = FROM_UTF8( StrPurge( line + SZ( "Cd" ) ) );
} }
...@@ -1004,12 +1046,12 @@ void KICAD_PLUGIN::loadPAD( MODULE* aModule ) ...@@ -1004,12 +1046,12 @@ void KICAD_PLUGIN::loadPAD( MODULE* aModule )
{ {
auto_ptr<D_PAD> pad( new D_PAD( aModule ) ); auto_ptr<D_PAD> pad( new D_PAD( aModule ) );
while( aReader->ReadLine() ) while( READLINE() )
{ {
const char* data; const char* data;
char* line = aReader->Line(); char* line = aReader->Line();
if( TESTLINE( "Sh" ) ) // padname and shape if( TESTLINE( "Sh" ) ) // (Sh)ape and padname
{ {
// e.g. "Sh "A2" C 520 520 0 0 900" // e.g. "Sh "A2" C 520 520 0 0 900"
// "Sh "1" R 157 1378 0 0 900" // "Sh "1" R 157 1378 0 0 900"
...@@ -1044,7 +1086,7 @@ void KICAD_PLUGIN::loadPAD( MODULE* aModule ) ...@@ -1044,7 +1086,7 @@ void KICAD_PLUGIN::loadPAD( MODULE* aModule )
pad->ComputeShapeMaxRadius(); pad->ComputeShapeMaxRadius();
} }
else if( TESTLINE( "Dr" ) ) // drill else if( TESTLINE( "Dr" ) ) // (Dr)ill
{ {
// e.g. "Dr 350 0 0" or "Dr 0 0 0 O 0 0" // e.g. "Dr 350 0 0" or "Dr 0 0 0 O 0 0"
// sscanf( PtLine, "%d %d %d %s %d %d", &m_Drill.x, &m_Offset.x, &m_Offset.y, BufCar, &dx, &dy ); // sscanf( PtLine, "%d %d %d %s %d %d", &m_Drill.x, &m_Offset.x, &m_Offset.y, BufCar, &dx, &dy );
...@@ -1075,7 +1117,7 @@ void KICAD_PLUGIN::loadPAD( MODULE* aModule ) ...@@ -1075,7 +1117,7 @@ void KICAD_PLUGIN::loadPAD( MODULE* aModule )
pad->SetDrillSize( wxSize( drill_x, drill_y ) ); pad->SetDrillSize( wxSize( drill_x, drill_y ) );
} }
else if( TESTLINE( "At" ) ) else if( TESTLINE( "At" ) ) // (At)tribute
{ {
// e.g. "At SMD N 00888000" // e.g. "At SMD N 00888000"
// sscanf( PtLine, "%s %s %X", BufLine, BufCar, &m_layerMask ); // sscanf( PtLine, "%s %s %X", BufLine, BufCar, &m_layerMask );
...@@ -1103,7 +1145,7 @@ void KICAD_PLUGIN::loadPAD( MODULE* aModule ) ...@@ -1103,7 +1145,7 @@ void KICAD_PLUGIN::loadPAD( MODULE* aModule )
pad->SetAttribute( attribute ); pad->SetAttribute( attribute );
} }
else if( TESTLINE( "Ne" ) ) // netname else if( TESTLINE( "Ne" ) ) // (Ne)tname
{ {
// e.g. "Ne 461 "V5.0" // e.g. "Ne 461 "V5.0"
...@@ -1117,7 +1159,7 @@ void KICAD_PLUGIN::loadPAD( MODULE* aModule ) ...@@ -1117,7 +1159,7 @@ void KICAD_PLUGIN::loadPAD( MODULE* aModule )
pad->SetNetname( FROM_UTF8( StrPurge( buf ) ) ); pad->SetNetname( FROM_UTF8( StrPurge( buf ) ) );
} }
else if( TESTLINE( "Po" ) ) else if( TESTLINE( "Po" ) ) // (Po)sition
{ {
// e.g. "Po 500 -500" // e.g. "Po 500 -500"
wxPoint pos; wxPoint pos;
...@@ -1161,6 +1203,10 @@ void KICAD_PLUGIN::loadPAD( MODULE* aModule ) ...@@ -1161,6 +1203,10 @@ void KICAD_PLUGIN::loadPAD( MODULE* aModule )
else if( TESTLINE( "$EndPAD" ) ) else if( TESTLINE( "$EndPAD" ) )
{ {
RotatePoint( &pad->m_Pos, aModule->GetOrientation() );
pad->m_Pos += aModule->GetPosition();
aModule->m_Pads.PushBack( pad.release() ); aModule->m_Pads.PushBack( pad.release() );
return; // preferred exit return; // preferred exit
} }
...@@ -1172,7 +1218,138 @@ void KICAD_PLUGIN::loadPAD( MODULE* aModule ) ...@@ -1172,7 +1218,138 @@ void KICAD_PLUGIN::loadPAD( MODULE* aModule )
void KICAD_PLUGIN::loadEDGE_MODULE( MODULE* aModule ) void KICAD_PLUGIN::loadEDGE_MODULE( MODULE* aModule )
{ {
// @todo STROKE_T shape;
char* line = aReader->Line(); // obtain current (old) line
switch( line[1] )
{
case 'S': shape = S_SEGMENT; break;
case 'C': shape = S_CIRCLE; break;
case 'A': shape = S_ARC; break;
case 'P': shape = S_POLYGON; break;
default:
m_error.Printf( wxT( "Unknown EDGE_MODULE type '%s'" ), FROM_UTF8( line ).GetData() );
THROW_IO_ERROR( m_error );
}
auto_ptr<EDGE_MODULE> dwg( new EDGE_MODULE( aModule, shape ) ); // a drawing
const char* data;
// common to all cases, and we have to check their values uniformly at end
BIU width = 1;
int layer = FIRST_NON_COPPER_LAYER;
switch( shape )
{
case S_ARC:
{
// sscanf( Line + 3, "%d %d %d %d %d %d %d", &m_Start0.x, &m_Start0.y, &m_End0.x, &m_End0.y, &m_Angle, &m_Width, &m_Layer );
BIU start0_x = biuParse( line + SZ( "DA" ), &data );
BIU start0_y = biuParse( data, &data );
BIU end0_x = biuParse( data, &data );
BIU end0_y = biuParse( data, &data );
double angle = dblParse( data, &data );
width = biuParse( data, &data );
layer = intParse( data );
// @todo put in accessor
NORMALIZE_ANGLE_360( angle );
dwg->m_Start0 = wxPoint( start0_x, start0_y );
dwg->m_End0 = wxPoint( end0_x, end0_y );
}
break;
case S_SEGMENT:
case S_CIRCLE:
{
// e.g. "DS -7874 -10630 7874 -10630 50 20\r\n"
// sscanf( Line + 3, "%d %d %d %d %d %d", &m_Start0.x, &m_Start0.y, &m_End0.x, &m_End0.y, &m_Width, &m_Layer );
BIU start0_x = biuParse( line + SZ( "DS" ), &data );
BIU start0_y = biuParse( data, &data );
BIU end0_x = biuParse( data, &data );
BIU end0_y = biuParse( data, &data );
width = biuParse( data, &data );
layer = intParse( data );
dwg->m_Start0 = wxPoint( start0_x, start0_y );
dwg->m_End0 = wxPoint( end0_x, end0_y );
}
break;
case S_POLYGON:
#if 0 // @todo
{
int pointCount;
sscanf( Line + 3, "%d %d %d %d %d %d %d", &m_Start0.x, &m_Start0.y, &m_End0.x, &m_End0.y, &pointCount, &m_Width, &m_Layer );
m_PolyPoints.clear();
m_PolyPoints.reserve( pointCount );
for( ii = 0; ii<pointCount; ii++ )
{
if( READLINE() )
{
Buf = aReader->Line();
if( strncmp( Buf, "Dl", 2 ) != 0 )
{
error = 1;
break;
}
int x;
int y;
sscanf( Buf + 3, "%d %d\n", &x, &y );
m_PolyPoints.push_back( wxPoint( x, y ) );
}
else
{
error = 1;
break;
}
}
}
#endif
break;
default:
// first switch code above prevents us from getting here.
break;
}
// Check for a reasonable width:
/* @todo no MAX_WIDTH in out of reach header.
if( width <= 1 )
width = 1;
else if( width > MAX_WIDTH )
width = MAX_WIDTH;
*/
// Check for a reasonable layer:
// m_Layer must be >= FIRST_NON_COPPER_LAYER, but because microwave footprints
// can use the copper layers m_Layer < FIRST_NON_COPPER_LAYER is allowed.
// @todo: changes use of EDGE_MODULE these footprints and allows only
// m_Layer >= FIRST_NON_COPPER_LAYER
if( layer < 0 || layer > LAST_NON_COPPER_LAYER )
layer = SILKSCREEN_N_FRONT;
dwg->SetWidth( width );
dwg->SetLayer( layer );
EDGE_MODULE* em = dwg.release();
m_board->m_Drawings.PushBack( em );
// this had been done at the MODULE level before, presumably because it needs
// to be already added to a module before this function will work.
em->SetDrawCoord();
} }
...@@ -1195,14 +1372,11 @@ void KICAD_PLUGIN::load3D( MODULE* aModule ) ...@@ -1195,14 +1372,11 @@ void KICAD_PLUGIN::load3D( MODULE* aModule )
t3D = n3D; t3D = n3D;
} }
while( aReader->ReadLine() ) while( READLINE() )
{ {
char* line = aReader->Line(); char* line = aReader->Line();
if( TESTLINE( "$EndSHAPE3D" ) ) if( TESTLINE( "Na" ) ) // Shape File Name
return; // preferred exit
else if( TESTLINE( "Na" ) ) // Shape File Name
{ {
char buf[512]; char buf[512];
ReadDelimitedText( buf, line + SZ( "Na" ), sizeof(buf) ); ReadDelimitedText( buf, line + SZ( "Na" ), sizeof(buf) );
...@@ -1232,6 +1406,9 @@ void KICAD_PLUGIN::load3D( MODULE* aModule ) ...@@ -1232,6 +1406,9 @@ void KICAD_PLUGIN::load3D( MODULE* aModule )
&t3D->m_MatRotation.y, &t3D->m_MatRotation.y,
&t3D->m_MatRotation.z ); &t3D->m_MatRotation.z );
} }
else if( TESTLINE( "$EndSHAPE3D" ) )
return; // preferred exit
} }
THROW_IO_ERROR( wxT( "Missing '$EndSHAPE3D'" ) ); THROW_IO_ERROR( wxT( "Missing '$EndSHAPE3D'" ) );
...@@ -1251,25 +1428,22 @@ void KICAD_PLUGIN::loadDRAWSEGMENT() ...@@ -1251,25 +1428,22 @@ void KICAD_PLUGIN::loadDRAWSEGMENT()
DRAWSEGMENT* dseg = new DRAWSEGMENT( m_board ); DRAWSEGMENT* dseg = new DRAWSEGMENT( m_board );
m_board->Add( dseg, ADD_APPEND ); m_board->Add( dseg, ADD_APPEND );
while( aReader->ReadLine() ) while( READLINE() )
{ {
const char* data;
char* line = aReader->Line(); char* line = aReader->Line();
if( TESTLINE( "$EndDRAWSEGMENT" ) ) if( TESTLINE( "Po" ) )
return; // preferred exit
else if( TESTLINE( "Po" ) )
{ {
// sscanf( line + 2, " %d %d %d %d %d %d", &m_Shape, &m_Start.x, &m_Start.y, &m_End.x, &m_End.y, &m_Width ); // sscanf( line + 2, " %d %d %d %d %d %d", &m_Shape, &m_Start.x, &m_Start.y, &m_End.x, &m_End.y, &m_Width );
const char* data = line + SZ( "Po" ); int shape = intParse( line + SZ( "Po" ), &data );
BIU shape = biuParse( data, &data );
BIU start_x = biuParse( data, &data ); BIU start_x = biuParse( data, &data );
BIU start_y = biuParse( data, &data ); BIU start_y = biuParse( data, &data );
BIU end_x = biuParse( data, &data ); BIU end_x = biuParse( data, &data );
BIU end_y = biuParse( data, &data ); BIU end_y = biuParse( data, &data );
BIU width = biuParse( data ); BIU width = biuParse( data );
// @todo put in accessor? why 0?
if( width < 0 ) if( width < 0 )
width = 0; width = 0;
...@@ -1281,34 +1455,36 @@ void KICAD_PLUGIN::loadDRAWSEGMENT() ...@@ -1281,34 +1455,36 @@ void KICAD_PLUGIN::loadDRAWSEGMENT()
else if( TESTLINE( "De" ) ) else if( TESTLINE( "De" ) )
{ {
const char* data = strtok( line, " " ); // "De", skip it
BIU x = 0; BIU x = 0;
BIU y; BIU y;
int val;
for( int i = 0; (data = strtok( NULL, " " )) != NULL; ++i ) data = strtok( line + SZ( "De" ), delims );
for( int i = 0; data; ++i, data = strtok( NULL, delims ) )
{ {
switch( i ) switch( i )
{ {
case 0: case 0:
val = atoi( data ); int layer;
layer = intParse( data );
if( val < FIRST_NO_COPPER_LAYER ) // @todo: put in accessor?
val = FIRST_NO_COPPER_LAYER; if( layer < FIRST_NO_COPPER_LAYER )
layer = FIRST_NO_COPPER_LAYER;
else if( val > LAST_NO_COPPER_LAYER ) else if( layer > LAST_NO_COPPER_LAYER )
val = LAST_NO_COPPER_LAYER; layer = LAST_NO_COPPER_LAYER;
dseg->SetLayer( val ); dseg->SetLayer( layer );
break; break;
case 1: case 1:
val = atoi( data ); int mtype;
dseg->SetType( val ); // m_Type mtype = intParse( data );
dseg->SetType( mtype ); // m_Type
break; break;
case 2: case 2:
val = atoi( data ); double angle;
dseg->SetAngle( val ); // m_Angle angle = dblParse( data );
dseg->SetAngle( angle ); // m_Angle
break; break;
case 3: case 3:
long timestamp; long timestamp;
...@@ -1316,8 +1492,9 @@ void KICAD_PLUGIN::loadDRAWSEGMENT() ...@@ -1316,8 +1492,9 @@ void KICAD_PLUGIN::loadDRAWSEGMENT()
dseg->SetTimeStamp( timestamp ); dseg->SetTimeStamp( timestamp );
break; break;
case 4: case 4:
val = hexParse( data ); int state;
dseg->SetState( val, ON ); state = hexParse( data );
dseg->SetState( state, ON );
break; break;
// Bezier Control Points // Bezier Control Points
...@@ -1342,6 +1519,9 @@ void KICAD_PLUGIN::loadDRAWSEGMENT() ...@@ -1342,6 +1519,9 @@ void KICAD_PLUGIN::loadDRAWSEGMENT()
} }
} }
} }
else if( TESTLINE( "$EndDRAWSEGMENT" ) )
return; // preferred exit
} }
THROW_IO_ERROR( wxT( "Missing '$EndDRAWSEGMENT'" ) ); THROW_IO_ERROR( wxT( "Missing '$EndDRAWSEGMENT'" ) );
...@@ -1355,22 +1535,24 @@ void KICAD_PLUGIN::loadNETINFO_ITEM() ...@@ -1355,22 +1535,24 @@ void KICAD_PLUGIN::loadNETINFO_ITEM()
NETINFO_ITEM* net = new NETINFO_ITEM( m_board ); NETINFO_ITEM* net = new NETINFO_ITEM( m_board );
m_board->m_NetInfo->AppendNet( net ); m_board->m_NetInfo->AppendNet( net );
while( aReader->ReadLine() ) while( READLINE() )
{ {
const char* data;
char* line = aReader->Line(); char* line = aReader->Line();
if( TESTLINE( "$End" ) ) if( TESTLINE( "Na" ) )
return; // preferred exit
else if( TESTLINE( "Na" ) )
{ {
int tmp = atoi( line + 2 ); // e.g. "Na 58 "/cpu.sch/PAD7"\r\n"
int tmp = intParse( line + SZ( "Na" ), &data );
net->SetNet( tmp ); net->SetNet( tmp );
// skips to the first quote char ReadDelimitedText( buf, data, sizeof(buf) );
ReadDelimitedText( buf, line + 2, sizeof(buf) );
net->SetNetname( FROM_UTF8( buf ) ); net->SetNetname( FROM_UTF8( buf ) );
} }
else if( TESTLINE( "$EndEQUIPOT" ) )
return; // preferred exit
} }
THROW_IO_ERROR( wxT( "Missing '$EndEQUIPOT'" ) ); THROW_IO_ERROR( wxT( "Missing '$EndEQUIPOT'" ) );
...@@ -1405,16 +1587,12 @@ void KICAD_PLUGIN::loadPCB_TEXTE() ...@@ -1405,16 +1587,12 @@ void KICAD_PLUGIN::loadPCB_TEXTE()
TEXTE_PCB* pcbtxt = new TEXTE_PCB( m_board ); TEXTE_PCB* pcbtxt = new TEXTE_PCB( m_board );
m_board->Add( pcbtxt, ADD_APPEND ); m_board->Add( pcbtxt, ADD_APPEND );
while( aReader->ReadLine() ) while( READLINE() )
{ {
const char* data;
char* line = aReader->Line(); char* line = aReader->Line();
if( TESTLINE( "$EndTEXTPCB" ) ) if( TESTLINE( "Te" ) ) // Text line (or first line for multi line texts)
{
return; // preferred exit
}
else if( TESTLINE( "Te" ) ) // Text line (or first line for multi line texts)
{ {
ReadDelimitedText( text, line + 2, sizeof(text) ); ReadDelimitedText( text, line + 2, sizeof(text) );
pcbtxt->SetText( FROM_UTF8( text ) ); pcbtxt->SetText( FROM_UTF8( text ) );
...@@ -1422,25 +1600,21 @@ void KICAD_PLUGIN::loadPCB_TEXTE() ...@@ -1422,25 +1600,21 @@ void KICAD_PLUGIN::loadPCB_TEXTE()
else if( TESTLINE( "nl" ) ) // next line of the current text else if( TESTLINE( "nl" ) ) // next line of the current text
{ {
ReadDelimitedText( text, line + 2, sizeof(text) ); ReadDelimitedText( text, line + SZ( "nl" ), sizeof(text) );
pcbtxt->SetText( pcbtxt->GetText() + '\n' + FROM_UTF8( text ) ); pcbtxt->SetText( pcbtxt->GetText() + '\n' + FROM_UTF8( text ) );
} }
else if( TESTLINE( "Po" ) ) else if( TESTLINE( "Po" ) )
{ {
// sscanf( line + 2, " %d %d %d %d %d %d", &m_Pos.x, &m_Pos.y, &m_Size.x, &m_Size.y, &m_Thickness, &m_Orient ); // sscanf( line + 2, " %d %d %d %d %d %d", &m_Pos.x, &m_Pos.y, &m_Size.x, &m_Size.y, &m_Thickness, &m_Orient );
const char* data = line + SZ( "Po" ); wxSize size;
wxSize sz; BIU pos_x = biuParse( line + SZ( "Po" ), &data );
BIU pos_x = biuParse( data, &data );
BIU pos_y = biuParse( data, &data ); BIU pos_y = biuParse( data, &data );
size.x = biuParse( data, &data );
sz.x = biuParse( data, &data ); size.y = biuParse( data, &data );
sz.y = biuParse( data, &data );
BIU thickn = biuParse( data, &data ); BIU thickn = biuParse( data, &data );
int orient = atoi( data ); int orient = intParse( data );
// Ensure the text has minimal size to see this text on screen: // Ensure the text has minimal size to see this text on screen:
...@@ -1456,65 +1630,54 @@ void KICAD_PLUGIN::loadPCB_TEXTE() ...@@ -1456,65 +1630,54 @@ void KICAD_PLUGIN::loadPCB_TEXTE()
if( thickn < 1 ) if( thickn < 1 )
thickn = 1; thickn = 1;
thickn = Clamp_Text_PenSize( thickn, sz ); thickn = Clamp_Text_PenSize( thickn, size );
pcbtxt->SetSize( size );
pcbtxt->SetThickness( thickn ); pcbtxt->SetThickness( thickn );
pcbtxt->SetOrientation( orient ); pcbtxt->SetOrientation( orient );
pcbtxt->m_Pos = wxPoint( pos_x, pos_y ); pcbtxt->SetPosition( wxPoint( pos_x, pos_y ) );
pcbtxt->SetSize( sz );
} }
else if( TESTLINE( "De" ) ) else if( TESTLINE( "De" ) )
{ {
char style[256]; // e.g. "De 21 1 0 Normal C\r\n"
// sscanf( line + 2, " %d %d %lX %s %c\n", &m_Layer, &normal_display, &m_TimeStamp, style, &hJustify );
style[0] = 0; int layer = intParse( line + SZ( "De" ), &data );
int notMirrored = intParse( data, &data );
long timestamp = hexParse( data, &data );
char* style = strtok( (char*) data, delims );
char* hJustify = strtok( NULL, delims );
int normal_display = 1; pcbtxt->SetMirrored( !notMirrored );
char hJustify = 'c'; pcbtxt->SetTimeStamp( timestamp );
int layer = FIRST_COPPER_LAYER; pcbtxt->SetItalic( strncmp( style, "Italic", SZ( "Italic" ) )==0 );
long timestamp = 0;
bool italic = false;
// sscanf( line + 2, " %d %d %lX %s %c\n", &m_Layer, &normal_display, &m_TimeStamp, style, &hJustify ); GRTextHorizJustifyType hj;
sscanf( line + 2, " %d %d %lX %s %c\n", &layer, &normal_display, &timestamp, style, &hJustify ); switch( *hJustify )
{
default:
case 'C': hj = GR_TEXT_HJUSTIFY_CENTER; break;
case 'L': hj = GR_TEXT_HJUSTIFY_LEFT; break;
case 'R': hj = GR_TEXT_HJUSTIFY_RIGHT; break;
}
normal_display = normal_display ? false : true; pcbtxt->SetHorizJustify( hj );
if( layer < FIRST_COPPER_LAYER ) if( layer < FIRST_COPPER_LAYER )
layer = FIRST_COPPER_LAYER; layer = FIRST_COPPER_LAYER;
else if( layer > LAST_NO_COPPER_LAYER ) else if( layer > LAST_NO_COPPER_LAYER )
layer = LAST_NO_COPPER_LAYER; layer = LAST_NO_COPPER_LAYER;
pcbtxt->SetLayer( layer );
if( strnicmp( style, "Italic", 6 ) == 0 )
italic = true;
switch( hJustify )
{
case 'l':
case 'L':
hJustify = GR_TEXT_HJUSTIFY_LEFT;
break;
case 'c':
case 'C':
hJustify = GR_TEXT_HJUSTIFY_CENTER;
break;
case 'r':
case 'R':
hJustify = GR_TEXT_HJUSTIFY_RIGHT;
break;
default:
hJustify = GR_TEXT_HJUSTIFY_CENTER;
break;
} }
pcbtxt->SetHorizJustify( GRTextHorizJustifyType( hJustify ) ); else if( TESTLINE( "$EndTEXTPCB" ) )
pcbtxt->SetLayer( layer ); {
pcbtxt->SetItalic( italic ); return; // preferred exit
pcbtxt->SetTimeStamp( timestamp );
} }
} }
...@@ -1524,7 +1687,7 @@ void KICAD_PLUGIN::loadPCB_TEXTE() ...@@ -1524,7 +1687,7 @@ void KICAD_PLUGIN::loadPCB_TEXTE()
void KICAD_PLUGIN::loadTrackList( TRACK* aInsertBeforeMe, int aStructType ) void KICAD_PLUGIN::loadTrackList( TRACK* aInsertBeforeMe, int aStructType )
{ {
while( aReader->ReadLine() ) while( READLINE() )
{ {
// read two lines per loop iteration, each loop is one TRACK or VIA // read two lines per loop iteration, each loop is one TRACK or VIA
// example first line: // example first line:
...@@ -1543,10 +1706,10 @@ void KICAD_PLUGIN::loadTrackList( TRACK* aInsertBeforeMe, int aStructType ) ...@@ -1543,10 +1706,10 @@ void KICAD_PLUGIN::loadTrackList( TRACK* aInsertBeforeMe, int aStructType )
const char* data = line + SZ( "Po" ); const char* data = line + SZ( "Po" );
int shape = intParse( data, &data ); int shape = intParse( data, &data );
BIU startX = biuParse( data, &data ); BIU start_x = biuParse( data, &data );
BIU startY = biuParse( data, &data ); BIU start_y = biuParse( data, &data );
BIU endX = biuParse( data, &data ); BIU end_x = biuParse( data, &data );
BIU endY = biuParse( data, &data ); BIU end_y = biuParse( data, &data );
BIU width = biuParse( data, &data ); BIU width = biuParse( data, &data );
// optional 7th drill parameter (must be optional in an old format?) // optional 7th drill parameter (must be optional in an old format?)
...@@ -1561,8 +1724,7 @@ void KICAD_PLUGIN::loadTrackList( TRACK* aInsertBeforeMe, int aStructType ) ...@@ -1561,8 +1724,7 @@ void KICAD_PLUGIN::loadTrackList( TRACK* aInsertBeforeMe, int aStructType )
// differentiates between PCB_TRACE_T and PCB_VIA_T. With virtual // differentiates between PCB_TRACE_T and PCB_VIA_T. With virtual
// functions in use, it is critical to instantiate the PCB_VIA_T // functions in use, it is critical to instantiate the PCB_VIA_T
// exactly. // exactly.
if( !aReader->ReadLine() ) READLINE();
break;
line = aReader->Line(); line = aReader->Line();
...@@ -1610,8 +1772,8 @@ void KICAD_PLUGIN::loadTrackList( TRACK* aInsertBeforeMe, int aStructType ) ...@@ -1610,8 +1772,8 @@ void KICAD_PLUGIN::loadTrackList( TRACK* aInsertBeforeMe, int aStructType )
newTrack->SetTimeStamp( timeStamp ); newTrack->SetTimeStamp( timeStamp );
newTrack->SetPosition( wxPoint( startX, startY ) ); newTrack->SetPosition( wxPoint( start_x, start_y ) );
newTrack->SetEnd( wxPoint( endX, endY ) ); newTrack->SetEnd( wxPoint( end_x, end_y ) );
newTrack->SetWidth( width ); newTrack->SetWidth( width );
newTrack->SetShape( shape ); newTrack->SetShape( shape );
...@@ -1648,7 +1810,7 @@ void KICAD_PLUGIN::loadNETCLASS() ...@@ -1648,7 +1810,7 @@ void KICAD_PLUGIN::loadNETCLASS()
// just before returning. // just before returning.
auto_ptr<NETCLASS> netclass( new NETCLASS( m_board, wxEmptyString ) ); auto_ptr<NETCLASS> netclass( new NETCLASS( m_board, wxEmptyString ) );
while( aReader->ReadLine() ) while( READLINE() )
{ {
char* line = aReader->Line(); char* line = aReader->Line();
...@@ -1740,7 +1902,7 @@ void KICAD_PLUGIN::loadZONE_CONTAINER() ...@@ -1740,7 +1902,7 @@ void KICAD_PLUGIN::loadZONE_CONTAINER()
bool sawCorner = false; bool sawCorner = false;
int layer = 0; int layer = 0;
while( aReader->ReadLine() ) while( READLINE() )
{ {
char* line = aReader->Line(); char* line = aReader->Line();
...@@ -1916,7 +2078,7 @@ void KICAD_PLUGIN::loadZONE_CONTAINER() ...@@ -1916,7 +2078,7 @@ void KICAD_PLUGIN::loadZONE_CONTAINER()
{ {
// Read the PolysList (polygons used for fill areas in the zone) // Read the PolysList (polygons used for fill areas in the zone)
while( aReader->ReadLine() ) while( READLINE() )
{ {
line = aReader->Line(); line = aReader->Line();
...@@ -1939,7 +2101,7 @@ void KICAD_PLUGIN::loadZONE_CONTAINER() ...@@ -1939,7 +2101,7 @@ void KICAD_PLUGIN::loadZONE_CONTAINER()
else if( TESTLINE( "$FILLSEGMENTS" ) ) else if( TESTLINE( "$FILLSEGMENTS" ) )
{ {
while( aReader->ReadLine() ) while( READLINE() )
{ {
line = aReader->Line(); line = aReader->Line();
...@@ -1990,7 +2152,7 @@ void KICAD_PLUGIN::loadDIMENSION() ...@@ -1990,7 +2152,7 @@ void KICAD_PLUGIN::loadDIMENSION()
{ {
auto_ptr<DIMENSION> dim( new DIMENSION( m_board ) ); auto_ptr<DIMENSION> dim( new DIMENSION( m_board ) );
while( aReader->ReadLine() ) while( READLINE() )
{ {
const char* data; const char* data;
char* line = aReader->Line(); char* line = aReader->Line();
...@@ -2189,7 +2351,7 @@ void KICAD_PLUGIN::loadDIMENSION() ...@@ -2189,7 +2351,7 @@ void KICAD_PLUGIN::loadDIMENSION()
void KICAD_PLUGIN::loadPCB_TARGET() void KICAD_PLUGIN::loadPCB_TARGET()
{ {
while( aReader->ReadLine() ) while( READLINE() )
{ {
char* line = aReader->Line(); char* line = aReader->Line();
...@@ -2262,16 +2424,16 @@ BIU KICAD_PLUGIN::biuParse( const char* aValue, const char** nptrptr ) ...@@ -2262,16 +2424,16 @@ BIU KICAD_PLUGIN::biuParse( const char* aValue, const char** nptrptr )
if( errno ) if( errno )
{ {
m_error.Printf( _( "invalid float number in file: '%s' on line: %d" ), m_error.Printf( _( "invalid float number in file:'%s', line:%d, offset:%d" ),
aReader->GetSource().GetData(), aReader->LineNumber() ); aReader->GetSource().GetData(), aReader->LineNumber(), aValue - aReader->Line() + 1 );
THROW_IO_ERROR( m_error ); THROW_IO_ERROR( m_error );
} }
if( aValue == nptr ) if( aValue == nptr )
{ {
m_error.Printf( _( "missing float number in file: '%s' on line: %d" ), m_error.Printf( _( "missing float number in file:'%s', line:%d, offset:%d" ),
aReader->GetSource().GetData(), aReader->LineNumber() ); aReader->GetSource().GetData(), aReader->LineNumber(), aValue - aReader->Line() + 1 );
THROW_IO_ERROR( m_error ); THROW_IO_ERROR( m_error );
} }
...@@ -2285,6 +2447,37 @@ BIU KICAD_PLUGIN::biuParse( const char* aValue, const char** nptrptr ) ...@@ -2285,6 +2447,37 @@ BIU KICAD_PLUGIN::biuParse( const char* aValue, const char** nptrptr )
} }
double KICAD_PLUGIN::dblParse( const char* aValue, const char** nptrptr )
{
char* nptr;
errno = 0;
double fval = strtod( aValue, &nptr );
if( errno )
{
m_error.Printf( _( "invalid float number in file:'%s', line:%d, offset:%d" ),
aReader->GetSource().GetData(), aReader->LineNumber(), aValue - aReader->Line() + 1 );
THROW_IO_ERROR( m_error );
}
if( aValue == nptr )
{
m_error.Printf( _( "missing float number in file:'%s', line:%d, offset:%d" ),
aReader->GetSource().GetData(), aReader->LineNumber(), aValue - aReader->Line() + 1 );
THROW_IO_ERROR( m_error );
}
if( nptrptr )
*nptrptr = nptr;
return fval;
}
void KICAD_PLUGIN::init( PROPERTIES* aProperties ) void KICAD_PLUGIN::init( PROPERTIES* aProperties )
{ {
NbDraw = NbTrack = NbZone = NbMod = NbNets = -1; NbDraw = NbTrack = NbZone = NbMod = NbNets = -1;
......
...@@ -102,6 +102,19 @@ protected: ...@@ -102,6 +102,19 @@ protected:
*/ */
BIU biuParse( const char* aValue, const char** nptrptr = NULL ); BIU biuParse( const char* aValue, const char** nptrptr = NULL );
/**
* Function dblParse
* parses an ASCII decimal floating point value without scaling into a double.
*
* @param aValue is the ASCII value in C locale form with possible leading whitespace
*
* @param nptrptr may be NULL, but if not, then it tells where to put a
* pointer to the next unconsumed input text. See "man strtod" for more information.
*
* @return double - the string converted to a primitive double type
*/
double dblParse( const char* aValue, const char** nptrptr = NULL );
// load / parse functions // load / parse functions
void loadAllSections( bool doAppend ); void loadAllSections( bool doAppend );
......
...@@ -229,7 +229,7 @@ static DRAWSEGMENT* findPoint( const wxPoint& aPoint, TYPE_COLLECTOR* items ) ...@@ -229,7 +229,7 @@ static DRAWSEGMENT* findPoint( const wxPoint& aPoint, TYPE_COLLECTOR* items )
DRAWSEGMENT* graphic = (DRAWSEGMENT*) (*items)[i]; DRAWSEGMENT* graphic = (DRAWSEGMENT*) (*items)[i];
printf( "type=%s, GetStart()=%d,%d GetEnd()=%d,%d\n", printf( "type=%s, GetStart()=%d,%d GetEnd()=%d,%d\n",
TO_UTF8( BOARD_ITEM::ShowShape( (Track_Shapes)graphic->m_Shape ) ), TO_UTF8( BOARD_ITEM::ShowShape( (STROKE_T) graphic->m_Shape ) ),
graphic->GetStart().x, graphic->GetStart().x,
graphic->GetStart().y, graphic->GetStart().y,
graphic->GetEnd().x, graphic->GetEnd().x,
...@@ -667,7 +667,7 @@ IMAGE* SPECCTRA_DB::makeIMAGE( BOARD* aBoard, MODULE* aModule ) ...@@ -667,7 +667,7 @@ IMAGE* SPECCTRA_DB::makeIMAGE( BOARD* aBoard, MODULE* aModule )
case S_ARC: case S_ARC:
default: default:
D( printf("makeIMAGE(): unsupported shape %s\n", D( printf("makeIMAGE(): unsupported shape %s\n",
TO_UTF8( BOARD_ITEM::ShowShape( (Track_Shapes)graphic->m_Shape)) );) TO_UTF8( BOARD_ITEM::ShowShape( (STROKE_T) graphic->m_Shape)) );)
continue; continue;
} }
} }
...@@ -858,7 +858,7 @@ void SPECCTRA_DB::fillBOUNDARY( BOARD* aBoard, BOUNDARY* boundary ) throw( IO_ER ...@@ -858,7 +858,7 @@ void SPECCTRA_DB::fillBOUNDARY( BOARD* aBoard, BOUNDARY* boundary ) throw( IO_ER
wxString error; wxString error;
error.Printf( _("Unsupported DRAWSEGMENT type %s"), error.Printf( _("Unsupported DRAWSEGMENT type %s"),
GetChars( BOARD_ITEM::ShowShape( (Track_Shapes) graphic->m_Shape ) ) ); GetChars( BOARD_ITEM::ShowShape( (STROKE_T) graphic->m_Shape ) ) );
ThrowIOError( error ); ThrowIOError( error );
} }
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment