Commit 05faa369 authored by Dick Hollenbeck's avatar Dick Hollenbeck

KICAD_PLUG intermediate work, for eventual nanometer boards

parents d9e0ab02 1b5edd6d
......@@ -761,7 +761,7 @@ public:
wxString m_Text; /* text! */
wxPoint m_Pos; /* XY position of anchor text. */
wxSize m_Size; /* XY size of text */
bool m_Mirror; /* Display Normal / mirror */
bool m_Mirror; ///< true iff mirrored
int m_Attributs; /* flags (visible...) */
bool m_Italic; /* true to simulate (or use if exists)
* an italic font... */
......@@ -798,6 +798,9 @@ public:
void SetItalic( bool isItalic ) { m_Italic = isItalic; }
bool IsItalic() const { return m_Italic; }
void SetMirrored( bool doMirror ) { m_Mirror = doMirror; }
bool IsMirrored() const { return m_Mirror; }
/**
* Function SetSize
* sets text size.
......
......@@ -16,15 +16,20 @@ class BOARD;
class EDA_DRAW_PANEL;
/* Shapes for segments (graphic segments and tracks) ( .m_Shape member ) */
enum Track_Shapes {
S_SEGMENT = 0, /* usual segment : line with rounded ends */
S_RECT, /* segment with non rounded ends */
S_ARC, /* Arcs (with rounded ends) */
S_CIRCLE, /* ring */
S_POLYGON, /* polygon (not yet used for tracks, but could be in microwave apps) */
S_CURVE, /* Bezier Curve */
S_LAST /* last value for this list */
/**
* Enum STROKE_T
* is the set of shapes for segments (graphic segments and tracks) which are often
* in the .m_Shape member
*/
enum STROKE_T
{
S_SEGMENT = 0, ///< usual segment : line with rounded ends
S_RECT, ///< segment with non rounded ends
S_ARC, ///< Arcs (with rounded ends)
S_CIRCLE, ///< ring
S_POLYGON, ///< polygon (not yet used for tracks, but could be in microwave apps)
S_CURVE, ///< Bezier Curve
S_LAST ///< last value for this list
};
......@@ -165,9 +170,9 @@ public:
/**
* Function ShowShape
* converts the enum Track_Shapes integer value to a wxString.
* converts the enum STROKE_T integer value to a wxString.
*/
static wxString ShowShape( Track_Shapes aShape );
static wxString ShowShape( STROKE_T aShape );
/**
* Function Save
......
......@@ -10,7 +10,7 @@
#include "class_board.h"
wxString BOARD_ITEM::ShowShape( Track_Shapes aShape )
wxString BOARD_ITEM::ShowShape( STROKE_T aShape )
{
switch( aShape )
{
......
......@@ -566,7 +566,7 @@ wxString DRAWSEGMENT::GetSelectMenuText() const
wxString temp;
text.Printf( _( "Pcb Graphic: %s length: %s on %s" ),
GetChars( ShowShape( (Track_Shapes)m_Shape ) ),
GetChars( ShowShape( (STROKE_T) m_Shape ) ),
GetChars( valeur_param( GetLength(), temp ) ),
GetChars( GetLayerName() ) );
......
......@@ -30,10 +30,10 @@
/* class EDGE_MODULE */
/*********************/
EDGE_MODULE::EDGE_MODULE( MODULE* parent ) :
EDGE_MODULE::EDGE_MODULE( MODULE* parent, STROKE_T aShape ) :
DRAWSEGMENT( parent, PCB_MODULE_EDGE_T )
{
m_Shape = S_SEGMENT;
m_Shape = aShape;
m_Angle = 0;
m_Width = 120;
}
......@@ -422,7 +422,7 @@ wxString EDGE_MODULE::GetSelectMenuText() const
{
wxString text;
text << _( "Graphic" ) << wxT( " " ) << ShowShape( (Track_Shapes) m_Shape );
text << _( "Graphic" ) << wxT( " " ) << ShowShape( (STROKE_T) m_Shape );
text << wxT( " (" ) << GetLayerName() << wxT( ")" );
text << _( " of " ) << ( (MODULE*) GetParent() )->GetReference();
......@@ -441,7 +441,7 @@ wxString EDGE_MODULE::GetSelectMenuText() const
*/
void EDGE_MODULE::Show( int nestLevel, std::ostream& os )
{
wxString shape = ShowShape( (Track_Shapes) m_Shape );
wxString shape = ShowShape( (STROKE_T) m_Shape );
// for now, make it look like XML:
NestedSpace( nestLevel, os ) << '<' << GetClass().Lower().mb_str() <<
......
......@@ -22,7 +22,7 @@ public:
wxPoint m_End0; // End point, relative to module origin, orient 0.
public:
EDGE_MODULE( MODULE* parent );
EDGE_MODULE( MODULE* parent, STROKE_T aShape = S_SEGMENT );
EDGE_MODULE( EDGE_MODULE* edge );
~EDGE_MODULE();
......
......@@ -100,7 +100,7 @@ public:
virtual void Move( const wxPoint& aMoveVector )
{
m_Start += aMoveVector;
m_End += aMoveVector;
m_End += aMoveVector;
}
/**
......@@ -128,7 +128,7 @@ public:
void SetPosition( const wxPoint& aPos ) { m_Start = aPos; } // overload
void SetEnd( const wxPoint& aEnd ) { m_Start = aEnd; }
void SetEnd( const wxPoint& aEnd ) { m_End = aEnd; }
EDA_RECT GetBoundingBox() const;
......
......@@ -25,18 +25,25 @@
/*
This implements loading and saving a BOARD, behind the PLUGIN interface.
The philosophy on loading:
*) BIUs should be typed as such to distinguish them from ints.
The philosophies:
*) a BIU is a unit of length and is nanometers when this work is done, but deci-mils until done.
*) BIUs should be typed as such to distinguish them from ints. This is mostly
for human readability, and having the type nearby in the source supports this readability.
*) Do not assume that BIUs will always be int, doing a sscanf() into a BIU
does not make sense in case the size of the BUI changes.
*) variables are put onto the stack in an automatic, even when it might look
more efficient to do otherwise. This is so we can seem them with a debugger.
*) Global variables should not be touched from within a PLUGIN, since it will eventually
be in a DLL/DSO. This includes window information too. The PLUGIN API knows
nothing of wxFrame.
*) No wxWindowing calls are made in here, since the UI is going to process a bucket
of detailed information thrown from here in the form of an exception if an error
happens.
nothing of wxFrame or globals.
*) No wxWindowing calls are made in here, since the UI resides higher up than in here,
and is going to process a bucket of detailed information thrown from down here
in the form of an exception if an error happens.
*) Much of what we do in this source file is for human readability, not performance.
Simply avoiding strtok() more often than the old code washes out performance losses.
Remember strncmp() will bail as soon as a mismatch happens, not going all the way
to end of string unless a full match.
*) angles are in the process of migrating to doubles, and 'int' if used, is only shortterm.
*/
......@@ -71,10 +78,13 @@
#include <class_dimension.h>
#include <class_drawsegment.h>
#include <class_mire.h>
#include <class_edge_mod.h>
#include <3d_struct.h>
#include <pcb_plot_params.h>
#include <drawtxt.h>
#include <trigo.h>
/*
#include <pcbnew.h>
#include <pcbnew_id.h>
......@@ -144,6 +154,32 @@
#define SZ( x ) (sizeof(x)-1)
#if 1
#define READLINE() aReader->ReadLine()
#else
/// The function and macro which follow comprise a shim which can be a
/// monitor on lines of text read in from the input file.
/// And it can be used as a trap.
static inline unsigned ReadLine( LINE_READER* rdr, const char* caller )
{
unsigned ret = rdr->ReadLine();
const char* line = rdr->Line();
printf( "%-6u %s: %s", rdr->LineNumber(), caller, line );
#if 0 // trap
if( !strcmp( "loadSETUP", caller ) && !strcmp( "$EndSETUP\n", line ) )
{
int breakhere = 1;
}
#endif
return ret;
}
#define READLINE() ReadLine( aReader, __FUNCTION__ )
#endif
static const char delims[] = " \t\r\n";
using namespace std; // auto_ptr
......@@ -215,7 +251,7 @@ void KICAD_PLUGIN::loadAllSections( bool doAppend )
// Then follows $EQUIPOT and all the rest
while( aReader->ReadLine() )
while( READLINE() )
{
char* line = aReader->Line();
......@@ -293,7 +329,7 @@ void KICAD_PLUGIN::loadAllSections( bool doAppend )
}
else
{
while( aReader->ReadLine() )
while( READLINE() )
{
line = aReader->Line(); // gobble til $EndSetup
......@@ -305,6 +341,13 @@ void KICAD_PLUGIN::loadAllSections( bool doAppend )
else if( TESTLINE( "$EndBOARD" ) )
return; // preferred exit
/*
else
{
printf( "ignored: '%s'", line );
}
*/
}
THROW_IO_ERROR( wxT( "Missing '$EndBOARD'" ) );
......@@ -313,15 +356,12 @@ void KICAD_PLUGIN::loadAllSections( bool doAppend )
void KICAD_PLUGIN::loadGENERAL()
{
while( aReader->ReadLine() )
while( READLINE() )
{
char* line = aReader->Line();
const char* data;
if( TESTLINE( "$EndGENERAL" ) )
return; // preferred exit
else if( TESTLINE( "Units" ) )
if( TESTLINE( "Units" ) )
{
// what are the engineering units of the lengths in the BOARD?
data = strtok( line + SZ("Units"), delims );
......@@ -395,33 +435,31 @@ void KICAD_PLUGIN::loadGENERAL()
// Read the number of segments of type DRAW, TRACK, ZONE
else if( TESTLINE( "Ndraw" ) )
{
data = line + SZ( "Ndraw" );
NbDraw = atoi( data );
NbDraw = intParse( line + SZ( "Ndraw" ) );
}
else if( TESTLINE( "Ntrack" ) )
{
data = line + SZ( "Ntrack" );
NbTrack = atoi( data );
NbTrack = intParse( line + SZ( "Ntrack" ) );
}
else if( TESTLINE( "Nzone" ) )
{
data = line + SZ( "Nzone" );
NbZone = atoi( data );
NbZone = intParse( line + SZ( "Nzone" ) );
}
else if( TESTLINE( "Nmodule" ) )
{
data = line + SZ( "Nmodule" );
NbMod = atoi( data );
NbMod = intParse( line + SZ( "Nmodule" ) );
}
else if( TESTLINE( "Nnets" ) )
{
data = line + SZ( "Nnets" );
NbNets = atoi( data );
NbNets = intParse( line + SZ( "Nnets" ) );
}
else if( TESTLINE( "$EndGENERAL" ) )
return; // preferred exit
}
THROW_IO_ERROR( wxT( "Missing '$EndGENERAL'" ) );
......@@ -433,14 +471,11 @@ void KICAD_PLUGIN::loadSHEET()
char buf[260];
char* text;
while( aReader->ReadLine() )
while( READLINE() )
{
char* line = aReader->Line();
if( TESTLINE( "$End" ) )
return; // preferred exit
else if( TESTLINE( "Sheet" ) )
if( TESTLINE( "Sheet" ) )
{
text = strtok( line, delims );
text = strtok( NULL, delims );
......@@ -450,7 +485,7 @@ void KICAD_PLUGIN::loadSHEET()
for( ii = 0; sheet != NULL; ii++, sheet = g_SheetSizeList[ii] )
{
if( stricmp( TO_UTF8( sheet->m_Name ), text ) == 0 )
if( !stricmp( TO_UTF8( sheet->m_Name ), text ) )
{
// @todo screen->m_CurrentSheetDesc = sheet;
......@@ -522,6 +557,9 @@ void KICAD_PLUGIN::loadSHEET()
screen->m_Commentaire4 = FROM_UTF8( buf );
#endif
}
else if( TESTLINE( "$EndSHEETDESCR" ) )
return; // preferred exit
}
THROW_IO_ERROR( wxT( "Missing '$EndSHEETDESCR'" ) );
......@@ -532,7 +570,7 @@ void KICAD_PLUGIN::loadSETUP()
{
NETCLASS* netclass_default = m_board->m_NetClasses.GetDefault();
while( aReader->ReadLine() )
while( READLINE() )
{
const char* data;
......@@ -559,28 +597,6 @@ void KICAD_PLUGIN::loadSETUP()
*/
}
else if( TESTLINE( "$EndSETUP" ) )
{
// Until such time as the *.brd file does not have the
// global parameters:
// "TrackWidth", "TrackMinWidth", "ViaSize", "ViaDrill",
// "ViaMinSize", and "TrackClearence", put those same global
// values into the default NETCLASS until later board load
// code should override them. *.brd files which have been
// saved with knowledge of NETCLASSes will override these
// defaults, old boards will not.
//
// @todo: I expect that at some point we can remove said global
// parameters from the *.brd file since the ones in the
// default netclass serve the same purpose. If needed
// at all, the global defaults should go into a preferences
// file instead so they are there to start new board
// projects.
m_board->m_NetClasses.GetDefault()->SetParams();
return;
}
else if( TESTLINE( "AuxiliaryAxisOrg" ) )
{
BIU gx = biuParse( line + SZ( "AuxiliaryAxisOrg" ), &data );
......@@ -594,7 +610,7 @@ void KICAD_PLUGIN::loadSETUP()
#if defined(PCBNEW)
else if( TESTLINE( "Layers" ) == 0 )
else if( TESTLINE( "Layers" ) )
{
int tmp = atoi( line + SZ( "Layers" ) );
m_board->SetCopperLayerCount( tmp );
......@@ -622,13 +638,13 @@ void KICAD_PLUGIN::loadSETUP()
}
/* no more used
else if( TESTLINE( "TrackWidth" ) == 0 )
else if( TESTLINE( "TrackWidth" ) )
{
}
else if( TESTLINE( "ViaSize" ) )
{
}
else if( TESTLINE( "MicroViaSize" ) == 0 )
else if( TESTLINE( "MicroViaSize" ) )
{
}
*/
......@@ -812,6 +828,27 @@ void KICAD_PLUGIN::loadSETUP()
}
#endif
else if( TESTLINE( "$EndSETUP" ) )
{
// Until such time as the *.brd file does not have the
// global parameters:
// "TrackWidth", "TrackMinWidth", "ViaSize", "ViaDrill",
// "ViaMinSize", and "TrackClearence", put those same global
// values into the default NETCLASS until later board load
// code should override them. *.brd files which have been
// saved with knowledge of NETCLASSes will override these
// defaults, old boards will not.
//
// @todo: I expect that at some point we can remove said global
// parameters from the *.brd file since the ones in the
// default netclass serve the same purpose. If needed
// at all, the global defaults should go into a preferences
// file instead so they are there to start new board
// projects.
m_board->m_NetClasses.GetDefault()->SetParams();
return; // preferred exit
}
}
// @todo: this code is currently unreachable, would need a goto, to get here.
......@@ -848,7 +885,7 @@ void KICAD_PLUGIN::loadMODULE()
{
auto_ptr<MODULE> module( new MODULE( m_board ) );
while( aReader->ReadLine() )
while( READLINE() )
{
const char* data;
char* line = aReader->Line();
......@@ -872,10 +909,12 @@ void KICAD_PLUGIN::loadMODULE()
loadPAD( module.get() );
}
// Read a footprint text description (ref, value, or drawing)
else if( TESTLINE( "T" ) )
{
// Read a footprint text description (ref, value, or drawing)
int tnum = atoi( line + SZ( "T" ) );
// e.g. "T1 6940 -16220 350 300 900 60 M I 20 N "CFCARD"\r\n"
int tnum = intParse( line + SZ( "T" ) );
TEXTE_MODULE* textm;
......@@ -894,6 +933,8 @@ void KICAD_PLUGIN::loadMODULE()
else if( TESTLINE( "Po" ) )
{
// e.g. "Po 19120 39260 900 0 4E823D06 46EAAFA5 ~~\r\n"
// sscanf( PtLine, "%d %d %d %d %lX %lX %s", &m_Pos.x, &m_Pos.y, &m_Orient, &m_Layer, &m_LastEdit_Time, &m_TimeStamp, BufCar1 );
BIU pos_x = biuParse( line + SZ( "Po" ), &data );
......@@ -971,13 +1012,14 @@ void KICAD_PLUGIN::loadMODULE()
module->m_Path = FROM_UTF8( data );
}
else if( TESTLINE( "SHAPE3D" ) )
else if( TESTLINE( "$SHAPE3D" ) )
{
load3D( module.get() );
}
else if( TESTLINE( "Cd" ) )
{
// e.g. "Cd Double rangee de contacts 2 x 4 pins\r\n"
module->m_Doc = FROM_UTF8( StrPurge( line + SZ( "Cd" ) ) );
}
......@@ -1004,12 +1046,12 @@ void KICAD_PLUGIN::loadPAD( MODULE* aModule )
{
auto_ptr<D_PAD> pad( new D_PAD( aModule ) );
while( aReader->ReadLine() )
while( READLINE() )
{
const char* data;
char* line = aReader->Line();
if( TESTLINE( "Sh" ) ) // padname and shape
if( TESTLINE( "Sh" ) ) // (Sh)ape and padname
{
// e.g. "Sh "A2" C 520 520 0 0 900"
// "Sh "1" R 157 1378 0 0 900"
......@@ -1044,7 +1086,7 @@ void KICAD_PLUGIN::loadPAD( MODULE* aModule )
pad->ComputeShapeMaxRadius();
}
else if( TESTLINE( "Dr" ) ) // drill
else if( TESTLINE( "Dr" ) ) // (Dr)ill
{
// e.g. "Dr 350 0 0" or "Dr 0 0 0 O 0 0"
// sscanf( PtLine, "%d %d %d %s %d %d", &m_Drill.x, &m_Offset.x, &m_Offset.y, BufCar, &dx, &dy );
......@@ -1075,7 +1117,7 @@ void KICAD_PLUGIN::loadPAD( MODULE* aModule )
pad->SetDrillSize( wxSize( drill_x, drill_y ) );
}
else if( TESTLINE( "At" ) )
else if( TESTLINE( "At" ) ) // (At)tribute
{
// e.g. "At SMD N 00888000"
// sscanf( PtLine, "%s %s %X", BufLine, BufCar, &m_layerMask );
......@@ -1103,7 +1145,7 @@ void KICAD_PLUGIN::loadPAD( MODULE* aModule )
pad->SetAttribute( attribute );
}
else if( TESTLINE( "Ne" ) ) // netname
else if( TESTLINE( "Ne" ) ) // (Ne)tname
{
// e.g. "Ne 461 "V5.0"
......@@ -1117,7 +1159,7 @@ void KICAD_PLUGIN::loadPAD( MODULE* aModule )
pad->SetNetname( FROM_UTF8( StrPurge( buf ) ) );
}
else if( TESTLINE( "Po" ) )
else if( TESTLINE( "Po" ) ) // (Po)sition
{
// e.g. "Po 500 -500"
wxPoint pos;
......@@ -1161,6 +1203,10 @@ void KICAD_PLUGIN::loadPAD( MODULE* aModule )
else if( TESTLINE( "$EndPAD" ) )
{
RotatePoint( &pad->m_Pos, aModule->GetOrientation() );
pad->m_Pos += aModule->GetPosition();
aModule->m_Pads.PushBack( pad.release() );
return; // preferred exit
}
......@@ -1172,7 +1218,138 @@ void KICAD_PLUGIN::loadPAD( MODULE* aModule )
void KICAD_PLUGIN::loadEDGE_MODULE( MODULE* aModule )
{
// @todo
STROKE_T shape;
char* line = aReader->Line(); // obtain current (old) line
switch( line[1] )
{
case 'S': shape = S_SEGMENT; break;
case 'C': shape = S_CIRCLE; break;
case 'A': shape = S_ARC; break;
case 'P': shape = S_POLYGON; break;
default:
m_error.Printf( wxT( "Unknown EDGE_MODULE type '%s'" ), FROM_UTF8( line ).GetData() );
THROW_IO_ERROR( m_error );
}
auto_ptr<EDGE_MODULE> dwg( new EDGE_MODULE( aModule, shape ) ); // a drawing
const char* data;
// common to all cases, and we have to check their values uniformly at end
BIU width = 1;
int layer = FIRST_NON_COPPER_LAYER;
switch( shape )
{
case S_ARC:
{
// sscanf( Line + 3, "%d %d %d %d %d %d %d", &m_Start0.x, &m_Start0.y, &m_End0.x, &m_End0.y, &m_Angle, &m_Width, &m_Layer );
BIU start0_x = biuParse( line + SZ( "DA" ), &data );
BIU start0_y = biuParse( data, &data );
BIU end0_x = biuParse( data, &data );
BIU end0_y = biuParse( data, &data );
double angle = dblParse( data, &data );
width = biuParse( data, &data );
layer = intParse( data );
// @todo put in accessor
NORMALIZE_ANGLE_360( angle );
dwg->m_Start0 = wxPoint( start0_x, start0_y );
dwg->m_End0 = wxPoint( end0_x, end0_y );
}
break;
case S_SEGMENT:
case S_CIRCLE:
{
// e.g. "DS -7874 -10630 7874 -10630 50 20\r\n"
// sscanf( Line + 3, "%d %d %d %d %d %d", &m_Start0.x, &m_Start0.y, &m_End0.x, &m_End0.y, &m_Width, &m_Layer );
BIU start0_x = biuParse( line + SZ( "DS" ), &data );
BIU start0_y = biuParse( data, &data );
BIU end0_x = biuParse( data, &data );
BIU end0_y = biuParse( data, &data );
width = biuParse( data, &data );
layer = intParse( data );
dwg->m_Start0 = wxPoint( start0_x, start0_y );
dwg->m_End0 = wxPoint( end0_x, end0_y );
}
break;
case S_POLYGON:
#if 0 // @todo
{
int pointCount;
sscanf( Line + 3, "%d %d %d %d %d %d %d", &m_Start0.x, &m_Start0.y, &m_End0.x, &m_End0.y, &pointCount, &m_Width, &m_Layer );
m_PolyPoints.clear();
m_PolyPoints.reserve( pointCount );
for( ii = 0; ii<pointCount; ii++ )
{
if( READLINE() )
{
Buf = aReader->Line();
if( strncmp( Buf, "Dl", 2 ) != 0 )
{
error = 1;
break;
}
int x;
int y;
sscanf( Buf + 3, "%d %d\n", &x, &y );
m_PolyPoints.push_back( wxPoint( x, y ) );
}
else
{
error = 1;
break;
}
}
}
#endif
break;
default:
// first switch code above prevents us from getting here.
break;
}
// Check for a reasonable width:
/* @todo no MAX_WIDTH in out of reach header.
if( width <= 1 )
width = 1;
else if( width > MAX_WIDTH )
width = MAX_WIDTH;
*/
// Check for a reasonable layer:
// m_Layer must be >= FIRST_NON_COPPER_LAYER, but because microwave footprints
// can use the copper layers m_Layer < FIRST_NON_COPPER_LAYER is allowed.
// @todo: changes use of EDGE_MODULE these footprints and allows only
// m_Layer >= FIRST_NON_COPPER_LAYER
if( layer < 0 || layer > LAST_NON_COPPER_LAYER )
layer = SILKSCREEN_N_FRONT;
dwg->SetWidth( width );
dwg->SetLayer( layer );
EDGE_MODULE* em = dwg.release();
m_board->m_Drawings.PushBack( em );
// this had been done at the MODULE level before, presumably because it needs
// to be already added to a module before this function will work.
em->SetDrawCoord();
}
......@@ -1195,14 +1372,11 @@ void KICAD_PLUGIN::load3D( MODULE* aModule )
t3D = n3D;
}
while( aReader->ReadLine() )
while( READLINE() )
{
char* line = aReader->Line();
if( TESTLINE( "$EndSHAPE3D" ) )
return; // preferred exit
else if( TESTLINE( "Na" ) ) // Shape File Name
if( TESTLINE( "Na" ) ) // Shape File Name
{
char buf[512];
ReadDelimitedText( buf, line + SZ( "Na" ), sizeof(buf) );
......@@ -1232,6 +1406,9 @@ void KICAD_PLUGIN::load3D( MODULE* aModule )
&t3D->m_MatRotation.y,
&t3D->m_MatRotation.z );
}
else if( TESTLINE( "$EndSHAPE3D" ) )
return; // preferred exit
}
THROW_IO_ERROR( wxT( "Missing '$EndSHAPE3D'" ) );
......@@ -1251,25 +1428,22 @@ void KICAD_PLUGIN::loadDRAWSEGMENT()
DRAWSEGMENT* dseg = new DRAWSEGMENT( m_board );
m_board->Add( dseg, ADD_APPEND );
while( aReader->ReadLine() )
while( READLINE() )
{
const char* data;
char* line = aReader->Line();
if( TESTLINE( "$EndDRAWSEGMENT" ) )
return; // preferred exit
else if( TESTLINE( "Po" ) )
if( TESTLINE( "Po" ) )
{
// sscanf( line + 2, " %d %d %d %d %d %d", &m_Shape, &m_Start.x, &m_Start.y, &m_End.x, &m_End.y, &m_Width );
const char* data = line + SZ( "Po" );
BIU shape = biuParse( data, &data );
int shape = intParse( line + SZ( "Po" ), &data );
BIU start_x = biuParse( data, &data );
BIU start_y = biuParse( data, &data );
BIU end_x = biuParse( data, &data );
BIU end_y = biuParse( data, &data );
BIU width = biuParse( data );
// @todo put in accessor? why 0?
if( width < 0 )
width = 0;
......@@ -1281,34 +1455,36 @@ void KICAD_PLUGIN::loadDRAWSEGMENT()
else if( TESTLINE( "De" ) )
{
const char* data = strtok( line, " " ); // "De", skip it
BIU x = 0;
BIU y;
int val;
for( int i = 0; (data = strtok( NULL, " " )) != NULL; ++i )
data = strtok( line + SZ( "De" ), delims );
for( int i = 0; data; ++i, data = strtok( NULL, delims ) )
{
switch( i )
{
case 0:
val = atoi( data );
int layer;
layer = intParse( data );
if( val < FIRST_NO_COPPER_LAYER )
val = FIRST_NO_COPPER_LAYER;
// @todo: put in accessor?
if( layer < FIRST_NO_COPPER_LAYER )
layer = FIRST_NO_COPPER_LAYER;
else if( val > LAST_NO_COPPER_LAYER )
val = LAST_NO_COPPER_LAYER;
else if( layer > LAST_NO_COPPER_LAYER )
layer = LAST_NO_COPPER_LAYER;
dseg->SetLayer( val );
dseg->SetLayer( layer );
break;
case 1:
val = atoi( data );
dseg->SetType( val ); // m_Type
int mtype;
mtype = intParse( data );
dseg->SetType( mtype ); // m_Type
break;
case 2:
val = atoi( data );
dseg->SetAngle( val ); // m_Angle
double angle;
angle = dblParse( data );
dseg->SetAngle( angle ); // m_Angle
break;
case 3:
long timestamp;
......@@ -1316,8 +1492,9 @@ void KICAD_PLUGIN::loadDRAWSEGMENT()
dseg->SetTimeStamp( timestamp );
break;
case 4:
val = hexParse( data );
dseg->SetState( val, ON );
int state;
state = hexParse( data );
dseg->SetState( state, ON );
break;
// Bezier Control Points
......@@ -1342,6 +1519,9 @@ void KICAD_PLUGIN::loadDRAWSEGMENT()
}
}
}
else if( TESTLINE( "$EndDRAWSEGMENT" ) )
return; // preferred exit
}
THROW_IO_ERROR( wxT( "Missing '$EndDRAWSEGMENT'" ) );
......@@ -1355,22 +1535,24 @@ void KICAD_PLUGIN::loadNETINFO_ITEM()
NETINFO_ITEM* net = new NETINFO_ITEM( m_board );
m_board->m_NetInfo->AppendNet( net );
while( aReader->ReadLine() )
while( READLINE() )
{
char* line = aReader->Line();
if( TESTLINE( "$End" ) )
return; // preferred exit
const char* data;
char* line = aReader->Line();
else if( TESTLINE( "Na" ) )
if( TESTLINE( "Na" ) )
{
int tmp = atoi( line + 2 );
// e.g. "Na 58 "/cpu.sch/PAD7"\r\n"
int tmp = intParse( line + SZ( "Na" ), &data );
net->SetNet( tmp );
// skips to the first quote char
ReadDelimitedText( buf, line + 2, sizeof(buf) );
ReadDelimitedText( buf, data, sizeof(buf) );
net->SetNetname( FROM_UTF8( buf ) );
}
else if( TESTLINE( "$EndEQUIPOT" ) )
return; // preferred exit
}
THROW_IO_ERROR( wxT( "Missing '$EndEQUIPOT'" ) );
......@@ -1405,16 +1587,12 @@ void KICAD_PLUGIN::loadPCB_TEXTE()
TEXTE_PCB* pcbtxt = new TEXTE_PCB( m_board );
m_board->Add( pcbtxt, ADD_APPEND );
while( aReader->ReadLine() )
while( READLINE() )
{
const char* data;
char* line = aReader->Line();
if( TESTLINE( "$EndTEXTPCB" ) )
{
return; // preferred exit
}
else if( TESTLINE( "Te" ) ) // Text line (or first line for multi line texts)
if( TESTLINE( "Te" ) ) // Text line (or first line for multi line texts)
{
ReadDelimitedText( text, line + 2, sizeof(text) );
pcbtxt->SetText( FROM_UTF8( text ) );
......@@ -1422,25 +1600,21 @@ void KICAD_PLUGIN::loadPCB_TEXTE()
else if( TESTLINE( "nl" ) ) // next line of the current text
{
ReadDelimitedText( text, line + 2, sizeof(text) );
ReadDelimitedText( text, line + SZ( "nl" ), sizeof(text) );
pcbtxt->SetText( pcbtxt->GetText() + '\n' + FROM_UTF8( text ) );
}
else if( TESTLINE( "Po" ) )
{
// sscanf( line + 2, " %d %d %d %d %d %d", &m_Pos.x, &m_Pos.y, &m_Size.x, &m_Size.y, &m_Thickness, &m_Orient );
const char* data = line + SZ( "Po" );
wxSize sz;
wxSize size;
BIU pos_x = biuParse( data, &data );
BIU pos_x = biuParse( line + SZ( "Po" ), &data );
BIU pos_y = biuParse( data, &data );
sz.x = biuParse( data, &data );
sz.y = biuParse( data, &data );
size.x = biuParse( data, &data );
size.y = biuParse( data, &data );
BIU thickn = biuParse( data, &data );
int orient = atoi( data );
int orient = intParse( data );
// Ensure the text has minimal size to see this text on screen:
......@@ -1456,65 +1630,54 @@ void KICAD_PLUGIN::loadPCB_TEXTE()
if( thickn < 1 )
thickn = 1;
thickn = Clamp_Text_PenSize( thickn, sz );
thickn = Clamp_Text_PenSize( thickn, size );
pcbtxt->SetSize( size );
pcbtxt->SetThickness( thickn );
pcbtxt->SetOrientation( orient );
pcbtxt->m_Pos = wxPoint( pos_x, pos_y );
pcbtxt->SetSize( sz );
pcbtxt->SetPosition( wxPoint( pos_x, pos_y ) );
}
else if( TESTLINE( "De" ) )
{
char style[256];
// e.g. "De 21 1 0 Normal C\r\n"
// sscanf( line + 2, " %d %d %lX %s %c\n", &m_Layer, &normal_display, &m_TimeStamp, style, &hJustify );
style[0] = 0;
int layer = intParse( line + SZ( "De" ), &data );
int notMirrored = intParse( data, &data );
long timestamp = hexParse( data, &data );
char* style = strtok( (char*) data, delims );
char* hJustify = strtok( NULL, delims );
int normal_display = 1;
char hJustify = 'c';
int layer = FIRST_COPPER_LAYER;
long timestamp = 0;
bool italic = false;
pcbtxt->SetMirrored( !notMirrored );
pcbtxt->SetTimeStamp( timestamp );
pcbtxt->SetItalic( strncmp( style, "Italic", SZ( "Italic" ) )==0 );
// sscanf( line + 2, " %d %d %lX %s %c\n", &m_Layer, &normal_display, &m_TimeStamp, style, &hJustify );
GRTextHorizJustifyType hj;
sscanf( line + 2, " %d %d %lX %s %c\n", &layer, &normal_display, &timestamp, style, &hJustify );
switch( *hJustify )
{
default:
case 'C': hj = GR_TEXT_HJUSTIFY_CENTER; break;
case 'L': hj = GR_TEXT_HJUSTIFY_LEFT; break;
case 'R': hj = GR_TEXT_HJUSTIFY_RIGHT; break;
}
normal_display = normal_display ? false : true;
pcbtxt->SetHorizJustify( hj );
if( layer < FIRST_COPPER_LAYER )
layer = FIRST_COPPER_LAYER;
else if( layer > LAST_NO_COPPER_LAYER )
layer = LAST_NO_COPPER_LAYER;
pcbtxt->SetLayer( layer );
if( strnicmp( style, "Italic", 6 ) == 0 )
italic = true;
switch( hJustify )
{
case 'l':
case 'L':
hJustify = GR_TEXT_HJUSTIFY_LEFT;
break;
case 'c':
case 'C':
hJustify = GR_TEXT_HJUSTIFY_CENTER;
break;
case 'r':
case 'R':
hJustify = GR_TEXT_HJUSTIFY_RIGHT;
break;
default:
hJustify = GR_TEXT_HJUSTIFY_CENTER;
break;
}
}
pcbtxt->SetHorizJustify( GRTextHorizJustifyType( hJustify ) );
pcbtxt->SetLayer( layer );
pcbtxt->SetItalic( italic );
pcbtxt->SetTimeStamp( timestamp );
else if( TESTLINE( "$EndTEXTPCB" ) )
{
return; // preferred exit
}
}
......@@ -1524,7 +1687,7 @@ void KICAD_PLUGIN::loadPCB_TEXTE()
void KICAD_PLUGIN::loadTrackList( TRACK* aInsertBeforeMe, int aStructType )
{
while( aReader->ReadLine() )
while( READLINE() )
{
// read two lines per loop iteration, each loop is one TRACK or VIA
// example first line:
......@@ -1543,10 +1706,10 @@ void KICAD_PLUGIN::loadTrackList( TRACK* aInsertBeforeMe, int aStructType )
const char* data = line + SZ( "Po" );
int shape = intParse( data, &data );
BIU startX = biuParse( data, &data );
BIU startY = biuParse( data, &data );
BIU endX = biuParse( data, &data );
BIU endY = biuParse( data, &data );
BIU start_x = biuParse( data, &data );
BIU start_y = biuParse( data, &data );
BIU end_x = biuParse( data, &data );
BIU end_y = biuParse( data, &data );
BIU width = biuParse( data, &data );
// optional 7th drill parameter (must be optional in an old format?)
......@@ -1561,8 +1724,7 @@ void KICAD_PLUGIN::loadTrackList( TRACK* aInsertBeforeMe, int aStructType )
// differentiates between PCB_TRACE_T and PCB_VIA_T. With virtual
// functions in use, it is critical to instantiate the PCB_VIA_T
// exactly.
if( !aReader->ReadLine() )
break;
READLINE();
line = aReader->Line();
......@@ -1610,8 +1772,8 @@ void KICAD_PLUGIN::loadTrackList( TRACK* aInsertBeforeMe, int aStructType )
newTrack->SetTimeStamp( timeStamp );
newTrack->SetPosition( wxPoint( startX, startY ) );
newTrack->SetEnd( wxPoint( endX, endY ) );
newTrack->SetPosition( wxPoint( start_x, start_y ) );
newTrack->SetEnd( wxPoint( end_x, end_y ) );
newTrack->SetWidth( width );
newTrack->SetShape( shape );
......@@ -1648,7 +1810,7 @@ void KICAD_PLUGIN::loadNETCLASS()
// just before returning.
auto_ptr<NETCLASS> netclass( new NETCLASS( m_board, wxEmptyString ) );
while( aReader->ReadLine() )
while( READLINE() )
{
char* line = aReader->Line();
......@@ -1740,7 +1902,7 @@ void KICAD_PLUGIN::loadZONE_CONTAINER()
bool sawCorner = false;
int layer = 0;
while( aReader->ReadLine() )
while( READLINE() )
{
char* line = aReader->Line();
......@@ -1916,7 +2078,7 @@ void KICAD_PLUGIN::loadZONE_CONTAINER()
{
// Read the PolysList (polygons used for fill areas in the zone)
while( aReader->ReadLine() )
while( READLINE() )
{
line = aReader->Line();
......@@ -1939,7 +2101,7 @@ void KICAD_PLUGIN::loadZONE_CONTAINER()
else if( TESTLINE( "$FILLSEGMENTS" ) )
{
while( aReader->ReadLine() )
while( READLINE() )
{
line = aReader->Line();
......@@ -1990,7 +2152,7 @@ void KICAD_PLUGIN::loadDIMENSION()
{
auto_ptr<DIMENSION> dim( new DIMENSION( m_board ) );
while( aReader->ReadLine() )
while( READLINE() )
{
const char* data;
char* line = aReader->Line();
......@@ -2189,7 +2351,7 @@ void KICAD_PLUGIN::loadDIMENSION()
void KICAD_PLUGIN::loadPCB_TARGET()
{
while( aReader->ReadLine() )
while( READLINE() )
{
char* line = aReader->Line();
......@@ -2262,16 +2424,16 @@ BIU KICAD_PLUGIN::biuParse( const char* aValue, const char** nptrptr )
if( errno )
{
m_error.Printf( _( "invalid float number in file: '%s' on line: %d" ),
aReader->GetSource().GetData(), aReader->LineNumber() );
m_error.Printf( _( "invalid float number in file:'%s', line:%d, offset:%d" ),
aReader->GetSource().GetData(), aReader->LineNumber(), aValue - aReader->Line() + 1 );
THROW_IO_ERROR( m_error );
}
if( aValue == nptr )
{
m_error.Printf( _( "missing float number in file: '%s' on line: %d" ),
aReader->GetSource().GetData(), aReader->LineNumber() );
m_error.Printf( _( "missing float number in file:'%s', line:%d, offset:%d" ),
aReader->GetSource().GetData(), aReader->LineNumber(), aValue - aReader->Line() + 1 );
THROW_IO_ERROR( m_error );
}
......@@ -2285,6 +2447,37 @@ BIU KICAD_PLUGIN::biuParse( const char* aValue, const char** nptrptr )
}
double KICAD_PLUGIN::dblParse( const char* aValue, const char** nptrptr )
{
char* nptr;
errno = 0;
double fval = strtod( aValue, &nptr );
if( errno )
{
m_error.Printf( _( "invalid float number in file:'%s', line:%d, offset:%d" ),
aReader->GetSource().GetData(), aReader->LineNumber(), aValue - aReader->Line() + 1 );
THROW_IO_ERROR( m_error );
}
if( aValue == nptr )
{
m_error.Printf( _( "missing float number in file:'%s', line:%d, offset:%d" ),
aReader->GetSource().GetData(), aReader->LineNumber(), aValue - aReader->Line() + 1 );
THROW_IO_ERROR( m_error );
}
if( nptrptr )
*nptrptr = nptr;
return fval;
}
void KICAD_PLUGIN::init( PROPERTIES* aProperties )
{
NbDraw = NbTrack = NbZone = NbMod = NbNets = -1;
......
......@@ -102,6 +102,19 @@ protected:
*/
BIU biuParse( const char* aValue, const char** nptrptr = NULL );
/**
* Function dblParse
* parses an ASCII decimal floating point value without scaling into a double.
*
* @param aValue is the ASCII value in C locale form with possible leading whitespace
*
* @param nptrptr may be NULL, but if not, then it tells where to put a
* pointer to the next unconsumed input text. See "man strtod" for more information.
*
* @return double - the string converted to a primitive double type
*/
double dblParse( const char* aValue, const char** nptrptr = NULL );
// load / parse functions
void loadAllSections( bool doAppend );
......
......@@ -229,7 +229,7 @@ static DRAWSEGMENT* findPoint( const wxPoint& aPoint, TYPE_COLLECTOR* items )
DRAWSEGMENT* graphic = (DRAWSEGMENT*) (*items)[i];
printf( "type=%s, GetStart()=%d,%d GetEnd()=%d,%d\n",
TO_UTF8( BOARD_ITEM::ShowShape( (Track_Shapes)graphic->m_Shape ) ),
TO_UTF8( BOARD_ITEM::ShowShape( (STROKE_T) graphic->m_Shape ) ),
graphic->GetStart().x,
graphic->GetStart().y,
graphic->GetEnd().x,
......@@ -667,7 +667,7 @@ IMAGE* SPECCTRA_DB::makeIMAGE( BOARD* aBoard, MODULE* aModule )
case S_ARC:
default:
D( printf("makeIMAGE(): unsupported shape %s\n",
TO_UTF8( BOARD_ITEM::ShowShape( (Track_Shapes)graphic->m_Shape)) );)
TO_UTF8( BOARD_ITEM::ShowShape( (STROKE_T) graphic->m_Shape)) );)
continue;
}
}
......@@ -858,7 +858,7 @@ void SPECCTRA_DB::fillBOUNDARY( BOARD* aBoard, BOUNDARY* boundary ) throw( IO_ER
wxString error;
error.Printf( _("Unsupported DRAWSEGMENT type %s"),
GetChars( BOARD_ITEM::ShowShape( (Track_Shapes) graphic->m_Shape ) ) );
GetChars( BOARD_ITEM::ShowShape( (STROKE_T) graphic->m_Shape ) ) );
ThrowIOError( error );
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment