/*************************************************************/
/* menubar.cpp  - create the menubar for the schematic frame */
/*************************************************************/

#ifdef __GNUG__
#pragma implementation
#endif

#include "fctsys.h"
#include "common.h"

#include "program.h"
#include "libcmp.h"
#include "general.h"

#include "bitmaps.h"
#include "protos.h"
#include "id.h"
#include "hotkeys.h"

#include "schframe.h"


/************************************************/
void WinEDA_SchematicFrame::ReCreateMenuBar()
/************************************************/

/* create or update the menubar for the schematic frame
 */
{
    int        ii;
    wxMenuBar* menuBar = GetMenuBar();
    wxString   msg;

    if( menuBar == NULL )
    {
        menuBar = new wxMenuBar();

        m_FilesMenu = new wxMenu;

        // Menu File:
        wxMenuItem* item = new wxMenuItem( m_FilesMenu, ID_NEW_PROJECT,
                                          _( "&New" ),
                                          _( "New schematic" ) );
        item->SetBitmap( new_xpm );
        m_FilesMenu->Append( item );

        item = new wxMenuItem( m_FilesMenu, ID_LOAD_PROJECT,
                              _( "&Open" ),
                              _( "Open a schematic" ) );
        item->SetBitmap( open_xpm );
        m_FilesMenu->Append( item );

        item = new wxMenuItem( m_FilesMenu, ID_LOAD_ONE_SHEET,
                              _( "&Reload the current sheet" ),
                              _(
                                  "Load or reload a schematic file from file into the current sheet" ) );
        item->SetBitmap( import_xpm );
        m_FilesMenu->Append( item );

        m_FilesMenu->AppendSeparator();
        item = new wxMenuItem( m_FilesMenu, ID_SAVE_PROJECT,
                              _( "&Save" ),
                              _( "Save schematic project" ) );
        item->SetBitmap( save_project_xpm );
        m_FilesMenu->Append( item );

        m_FilesMenu->AppendSeparator();
        item = new wxMenuItem( m_FilesMenu, ID_SAVE_ONE_SHEET,
                              _( "Save &Current sheet" ),
                              _( "Save current sheet only" ) );
        item->SetBitmap( save_xpm );
        m_FilesMenu->Append( item );

        item = new wxMenuItem( m_FilesMenu, ID_SAVE_ONE_SHEET_AS,
                              _( "Save Current sheet &as.." ),
                              _( "Save current sheet as.." ) );
        item->SetBitmap( save_as_xpm );
        m_FilesMenu->Append( item );

        item = new wxMenuItem( m_FilesMenu, ID_GEN_PRINT,
                              _( "P&rint" ), _( "Print on current printer" ) );
        item->SetBitmap( print_button );
        m_FilesMenu->Append( item );

        /* Plot Submenu */
        wxMenu* choice_plot_fmt = new wxMenu;
        item = new wxMenuItem( choice_plot_fmt, ID_GEN_PLOT_PS,
                              _( "Plot PostScript" ), _( "Plotting in PostScript format" ) );
        item->SetBitmap( plot_PS_xpm );
        choice_plot_fmt->Append( item );

        item = new wxMenuItem( choice_plot_fmt, ID_GEN_PLOT_HPGL,
                              _( "Plot HPGL" ), _( "Plotting in HPGL format" ) );
        item->SetBitmap( plot_HPG_xpm );
        choice_plot_fmt->Append( item );

        item = new wxMenuItem( choice_plot_fmt, ID_GEN_PLOT_SVG,
                              _( "Plot SVG" ), _( "Plotting in SVG format" ) );
        item->SetBitmap( plot_xpm );
        choice_plot_fmt->Append( item );

#ifdef __WINDOWS__
        /* Under windows, one can draw to the clipboard */
        item = new wxMenuItem( choice_plot_fmt, ID_GEN_COPY_SHEET_TO_CLIPBOARD,
                              _( "Plot to Clipboard" ), _( "Export drawings to clipboard" ) );
        item->SetBitmap( copy_button );
        choice_plot_fmt->Append( item );
#endif

        m_FilesMenu->AppendSeparator();
        ADD_MENUITEM_WITH_HELP_AND_SUBMENU( m_FilesMenu, choice_plot_fmt,
                                            ID_GEN_PLOT, _( "&Plot" ),
                                            _( "Plot HPGL, PostScript, SVG" ), plot_xpm );

        m_FilesMenu->AppendSeparator();
        item = new wxMenuItem( m_FilesMenu, ID_EXIT, _( "E&xit" ), _( "Quit Eeschema" ) );
        item->SetBitmap( exit_xpm );
        m_FilesMenu->Append( item );

        // Create the list of last edited schematic files
        m_FilesMenu->AppendSeparator();
        int     max_file = m_Parent->m_LastProjectMaxCount;
        for( ii = 0; ii < max_file; ii++ )
        {
            if( GetLastProject( ii ).IsEmpty() )
                break;
            item = new wxMenuItem( m_FilesMenu, ID_LOAD_FILE_1 + ii,
                                  GetLastProject( ii ) );
            m_FilesMenu->Append( item );
        }

        // Menu Edit:
        wxMenu* editMenu = new wxMenu;
        msg  = AddHotkeyName( _( "&Undo\t" ), s_Schematic_Hokeys_Descr,
                              HK_UNDO );
        item = new wxMenuItem( editMenu, ID_SCHEMATIC_UNDO,
                              msg, _( "Undo last edition" ),
                              wxITEM_NORMAL );
        item->SetBitmap( undo_xpm );
        editMenu->Append( item );

        msg  = AddHotkeyName( _( "&Redo\t" ), s_Schematic_Hokeys_Descr,
                              HK_REDO );
        item = new wxMenuItem( editMenu, ID_SCHEMATIC_REDO,
                              msg, _( "Redo the last undo command" ),
                              wxITEM_NORMAL );
        item->SetBitmap( redo_xpm );
        editMenu->Append( item );

        editMenu->AppendSeparator();

        item = new wxMenuItem( editMenu, ID_SCHEMATIC_DELETE_ITEM_BUTT,
                               _( "Delete" ), _( "Delete items" ),
                               wxITEM_NORMAL );
        item->SetBitmap( delete_body_xpm );
        editMenu->Append( item );

        editMenu->AppendSeparator();

        item = new wxMenuItem( editMenu, ID_FIND_ITEMS,
                               _( "Find" ), _( "Find components and texts" ),
                               wxITEM_NORMAL );
        item->SetBitmap( find_xpm );
        editMenu->Append( item );

        // Menu View:
        wxMenu* viewMenu = new wxMenu;
        msg  = AddHotkeyName( _( "Zoom in" ), s_Schematic_Hokeys_Descr,
                              HK_ZOOM_IN);
        item = new wxMenuItem( viewMenu, ID_ZOOM_IN_BUTT,
                               msg, _( "Zoom in" ),
                               wxITEM_NORMAL );
        item->SetBitmap( zoom_in_xpm );
        viewMenu->Append( item );

        msg = AddHotkeyName( _( "Zoom out" ), s_Schematic_Hokeys_Descr,
                             HK_ZOOM_OUT );
        item = new wxMenuItem( viewMenu, ID_ZOOM_OUT_BUTT,
                               msg, _( "Zoom out" ),
                               wxITEM_NORMAL );
        item->SetBitmap( zoom_out_xpm );
        viewMenu->Append( item );

        item = new wxMenuItem( viewMenu, ID_ZOOM_PAGE_BUTT,
                               _( "Zoom auto" ), _( "Zoom auto" ),
                               wxITEM_NORMAL );
        item->SetBitmap( zoom_optimal_xpm );
        viewMenu->Append( item );

        viewMenu->AppendSeparator();

        msg = AddHotkeyName( _( "redraw" ), s_Schematic_Hokeys_Descr,
                             HK_ZOOM_REDRAW );
        item = new wxMenuItem( viewMenu, ID_ZOOM_REDRAW_BUTT,
                               msg, _( "Zoom auto" ),
                               wxITEM_NORMAL );
        item->SetBitmap( repaint_xpm );
        viewMenu->Append( item );

        // Place Menu
        //TODO: Unify the ID names!
        wxMenu* placeMenu = new wxMenu;

        item = new wxMenuItem( placeMenu, ID_COMPONENT_BUTT,
                               _( "&Component" ), _( "Place the component" ),
                               wxITEM_NORMAL );
        item->SetBitmap( add_component_xpm );
        placeMenu->Append( item );

        item = new wxMenuItem( placeMenu, ID_PLACE_POWER_BUTT,
                               _( "&Power port" ), _( "Place the power port" ),
                               wxITEM_NORMAL );
        item->SetBitmap( add_power_xpm );
        placeMenu->Append( item );

        item = new wxMenuItem( placeMenu, ID_WIRE_BUTT,
                               _( "&Wire" ), _( "Place the wire" ),
                               wxITEM_NORMAL );
        item->SetBitmap( add_line_xpm );
        placeMenu->Append( item );

        item = new wxMenuItem(
            placeMenu,
            ID_BUS_BUTT,
            _( "&Bus" ),
            _( "Place the bus" ),
            wxITEM_NORMAL
            );
        item->SetBitmap( add_bus_xpm );
        placeMenu->Append( item );

        item = new wxMenuItem(
            placeMenu,
            ID_WIRETOBUS_ENTRY_BUTT,
            _( "W&ire to bus entry" ),
            _( "Place the wire to bus entry" ),
            wxITEM_NORMAL
            );
        item->SetBitmap( add_line2bus_xpm );
        placeMenu->Append( item );

        item = new wxMenuItem(
            placeMenu,
            ID_BUSTOBUS_ENTRY_BUTT,
            _( "B&us to bus entry" ),
            _( "Place the bus to bus entry" ),
            wxITEM_NORMAL
            );
        item->SetBitmap( add_bus2bus_xpm );
        placeMenu->Append( item );

        item = new wxMenuItem(
            placeMenu,
            ID_NOCONN_BUTT,
            _( "No connect flag" ),
            _( "Place the no connect flag" ),
            wxITEM_NORMAL
            );
        item->SetBitmap( noconn_button );
        placeMenu->Append( item );

        item = new wxMenuItem(
            placeMenu,
            ID_LABEL_BUTT,
            _( "Net name" ),
            _( "Place the net name" ),
            wxITEM_NORMAL
            );
        item->SetBitmap( add_line_label_xpm );
        placeMenu->Append( item );

        item = new wxMenuItem( placeMenu, ID_GLABEL_BUTT,
            _( "Global label" ),
            _( "Place the global label. Warning: all global labels with the same name are connected in whole hierarchy" ),
            wxITEM_NORMAL
            );
        item->SetBitmap( add_glabel_xpm );
        placeMenu->Append( item );

       item = new wxMenuItem(
            placeMenu,
            ID_JUNCTION_BUTT,
            _( "Junction" ),
            _( "Place the junction" ),
            wxITEM_NORMAL
            );
        item->SetBitmap( add_junction_xpm );
        placeMenu->Append( item );

        placeMenu->AppendSeparator();

        item = new wxMenuItem(
            placeMenu,
            ID_HIERLABEL_BUTT,
            _( "Hierarchical label" ),
            _( "Place the hierarchical label. This label will be seen as a pin sheet in the sheet symbol" ),
            wxITEM_NORMAL
            );
        item->SetBitmap( add_hierarchical_label_xpm );
        placeMenu->Append( item );

         item = new wxMenuItem(
            placeMenu,
            ID_SHEET_SYMBOL_BUTT,
            _( "Hierarchical sheet" ),
            _( "Place the hierarchical sheet" ),
            wxITEM_NORMAL
            );
        item->SetBitmap( add_hierarchical_subsheet_xpm );
        placeMenu->Append( item );

        item = new wxMenuItem(
            placeMenu,
            ID_IMPORT_GLABEL_BUTT,
            _( "Imported hierarchical label" ),
            _( "Place the pin sheet (imported hierarchical label from sheet)" ),
            wxITEM_NORMAL
            );
        item->SetBitmap( import_hierarchical_label_xpm );
        placeMenu->Append( item );

        item = new wxMenuItem(
            placeMenu,
            ID_SHEET_LABEL_BUTT,
            _( "Hierarchical pin to sheet" ),
            _( "Place the hierarchical pin to sheet" ),
            wxITEM_NORMAL
            );
        item->SetBitmap( add_hierar_pin_xpm );
        placeMenu->Append( item );

        placeMenu->AppendSeparator();

        item = new wxMenuItem(
            placeMenu,
            ID_LINE_COMMENT_BUTT,
            _( "Graphic line or poligon" ),
            _( "Place the graphic line or poligon" ),
            wxITEM_NORMAL
            );
        item->SetBitmap( add_dashed_line_xpm );
        placeMenu->Append( item );

        item = new wxMenuItem(
            placeMenu,
            ID_TEXT_COMMENT_BUTT,
            _( "Graphic text (comment)" ),
            _( "Place the graphic text (comment)" ),
            wxITEM_NORMAL
            );
        item->SetBitmap( add_text_xpm );
        placeMenu->Append( item );

        // Menu Configuration:
        wxMenu* configmenu = new wxMenu;
        item = new wxMenuItem( configmenu, ID_CONFIG_REQ,
                              _( "&Libs and Dir" ),
                              _( "Setting Libraries, Directories and others..." ) );
        item->SetBitmap( library_xpm );
        configmenu->Append( item );

        item = new wxMenuItem( configmenu, ID_COLORS_SETUP,
                              _( "&Colors" ),
                              _( "Setting colors..." ) );
        item->SetBitmap( palette_xpm );
        configmenu->Append( item );

//		ADD_MENUITEM(configmenu, ID_OPTIONS_SETUP, _("&Options"), preference_xpm);
        item = new wxMenuItem( configmenu, ID_OPTIONS_SETUP,
                              _( "&Options" ),
                              _( "Select general options..." ) );
        item->SetBitmap( preference_xpm );
        configmenu->Append( item );

        // Font selection and setup
        AddFontSelectionMenu( configmenu );

        m_Parent->SetLanguageList( configmenu );

        configmenu->AppendSeparator();
        item = new wxMenuItem( configmenu, ID_CONFIG_SAVE, _( "&Save preferences" ),
                              _( "Save application preferences" ) );
        item->SetBitmap( save_setup_xpm );
        configmenu->Append( item );
        item = new wxMenuItem( configmenu, ID_CONFIG_READ, _( "&Read preferences" ),
                              _( "Read application preferences" ) );
        item->SetBitmap( read_setup_xpm );
        configmenu->Append( item );

        configmenu->AppendSeparator();
        AddHotkeyConfigMenu( configmenu );

        // Menu Help:
        wxMenu* helpMenu = new wxMenu;
        item = new wxMenuItem( helpMenu, ID_GENERAL_HELP,
                              _( "&Contents" ), _( "Open the eeschema manual" ) );
        item->SetBitmap( help_xpm );
        helpMenu->Append( item );

        item = new wxMenuItem( helpMenu, ID_KICAD_ABOUT,
                              _( "&About" ), _( "About this application" ) );
        item->SetBitmap( info_xpm );
        helpMenu->Append( item );


        menuBar->Append( m_FilesMenu, _( "&File" ) );
        menuBar->Append( editMenu, _( "&Edit" ) );
        menuBar->Append( viewMenu, _( "&View" ) );
        menuBar->Append( placeMenu, _( "&Place" ) );
        menuBar->Append( configmenu, _( "&Preferences" ) );
        menuBar->Append( helpMenu, _( "&Help" ) );

        // Associate the menu bar with the frame
        SetMenuBar( menuBar );
    }
    else        // Update the list of last edited schematic files
    {
        wxMenuItem* item;
        int         max_file = m_Parent->m_LastProjectMaxCount;
        for( ii = max_file - 1; ii >=0; ii-- )
        {
            if( m_FilesMenu->FindItem( ID_LOAD_FILE_1 + ii ) )
            {
                item = m_FilesMenu->Remove( ID_LOAD_FILE_1 + ii );
                if( item )
                {
                    SAFE_DELETE( item );
                }
            }
        }

        for( ii = 0; ii < max_file; ii++ )
        {
            if( GetLastProject( ii ).IsEmpty() )
                break;
            item = new wxMenuItem( m_FilesMenu, ID_LOAD_FILE_1 + ii,
                                  GetLastProject( ii ) );
            m_FilesMenu->Append( item );
        }
    }
}
