Skip to content

G
gtxe2_gpl
Commit 9aabc22e authored by Alexey Grebenkin's avatar Alexey Grebenkin
Browse files
Options

Fixed bugs, found while x393_sata testing

parent 789d67eb
Expand all Show whitespace changes
Inline Side-by-side
Showing with 677 additions and 113 deletions
GTXE2_CHANNEL.v
View file @ 9aabc22e
This diff is collapsed.
gtxe2_channel/GTXE2_CHANNEL_GPL.v
View file @ 9aabc22e
......@@ -26,7 +26,7 @@
* Due to lack of functionality of gtxe2_gpl project as compared to the xilinx's primitive,
* not all of the inputs are used and not all of the outputs are driven.
**/
//`include "gtxe2_chnl.v"
`include "gtxe2_chnl.v"
module GTXE2_CHANNEL(
// clocking ports, UG476 p.37
input [2:0] CPLLREFCLKSEL,
......@@ -90,13 +90,13 @@ module GTXE2_CHANNEL(
input [8:0] DRPADDR,
input DRPCLK,
input [15:0] DRPDI,
input [15:0] DRPDO,
output [15:0] DRPDO,
input DRPEN,
output DRPRDY,
input DRPWE,
// Digital Monitor Ports, ug476 p.95
input [3:0] CLKRSVD,
input [7:0] DMONITOROUT,
output [7:0] DMONITOROUT,
// TX Interface Ports, ug476 p.110
input [7:0] TXCHARDISPMODE,
input [7:0] TXCHARDISPVAL,
......@@ -113,7 +113,7 @@ module GTXE2_CHANNEL(
input [6:0] TXSEQUENCE,
input TXSTARTSEQ,
// TX BUffer Ports, ug476 p.134
input [1:0] TXBUFSTATUS,
output [1:0] TXBUFSTATUS,
// TX Buffer Bypass Ports, ug476 p.136
input TXDLYSRESET,
input TXPHALIGN,
......@@ -133,8 +133,8 @@ module GTXE2_CHANNEL(
input TXSYNCMODE,
input TXSYNCALLIN,
input TXSYNCIN,
input TXSYNCOUT,
input TXSYNCDONE,
output TXSYNCOUT,
output TXSYNCDONE,
// TX Pattern Generator, ug476 p.147
input [2:0] TXPRBSSEL,
input TXPRBSFORCEERR,
......@@ -177,7 +177,7 @@ module GTXE2_CHANNEL(
// TX Receiver Detection Ports, ug476 p.165
input TXDETECTRX,
output PHYSTATUS,
input [2:0] RXSTATUS,
output [2:0] RXSTATUS,
// TX OOB Signaling Ports, ug476 p.166
output TXCOMFINISH,
input TXCOMINIT,
......@@ -222,7 +222,7 @@ module GTXE2_CHANNEL(
input RXDFEXYDOVRDEN,
input RXDFEXYDEN,
input [1:0] RXMONITORSEL,
input [6:0] RXMONITOROUT,
output [6:0] RXMONITOROUT,
// CDR Ports, ug476 p.202
input RXCDRHOLD,
input RXCDROVRDEN,
......@@ -275,9 +275,9 @@ module GTXE2_CHANNEL(
output RXPHSLIPMONITOR,
output RXDLYSRESETDONE,
// RX Buffer Ports, ug476 p.259
input [2:0] RXBUFSTATUS,
output [2:0] RXBUFSTATUS,
// RX Clock Correction Ports, ug476 p.263
input [1:0] RXCLKCORCNT,
output [1:0] RXCLKCORCNT,
// RX Channel Bonding Ports, ug476 p.274
output RXCHANBONDSEQ,
output RXCHANISALIGNED,
......@@ -291,7 +291,7 @@ module GTXE2_CHANNEL(
// RX Gearbox Ports, ug476 p.285
output RXDATAVALID,
input RXGEARBOXSLIP,
input [2:0] RXHEADER,
output [2:0] RXHEADER,
output RXHEADERVALID,
output RXSTARTOFSEQ,
// FPGA RX Interface Ports, ug476 p.299
......@@ -561,7 +561,17 @@ parameter RXGEARBOX_EN = "FALSE";
parameter RX_CLK25_DIV = 6;
parameter TX_CLK25_DIV = 6;
wire reset = EYESCANRESET | RXCDRFREQRESET | RXCDRRESET | RXCDRRESETRSV | RXPRBSCNTRESET | RXBUFRESET | RXDLYSRESET | RXPHDLYRESET | RXDFELPMRESET | GTRXRESET | RXOOBRESET | RXPCSRESET | RXPMARESET | CFGRESET | GTTXRESET | GTRESETSEL | RESETOVRD | TXDLYSRESET | TXPHDLYRESET | TXPCSRESET | TXPMARESET;
// clocking reset ( + TX PMA)
wire clk_reset = EYESCANRESET | RXCDRFREQRESET | RXCDRRESET | RXCDRRESETRSV | RXPRBSCNTRESET | RXBUFRESET | RXDLYSRESET | RXPHDLYRESET | RXDFELPMRESET | GTRXRESET | RXOOBRESET | RXPCSRESET | RXPMARESET | CFGRESET | GTTXRESET | GTRESETSEL | RESETOVRD | TXDLYSRESET | TXPHDLYRESET | TXPCSRESET | TXPMARESET;
// have to wait before an external pll (mmcm) locks with usrclk, after that PCS can be resetted. Actually, we reset PMA also, because why not
reg reset;
reg [31:0] reset_timer = 0;
always @ (posedge TXUSRCLK)
reset_timer <= ~TXUSERRDY ? 32'h0 : reset_timer == 32'hffffffff ? reset_timer : reset_timer + 1'b1;
always @ (posedge TXUSRCLK)
reset <= ~TXUSERRDY ? 1'b0 : reset_timer < 32'd20 ? 1'b1 : 1'b0;
reg rx_rst_done = 1'b0;
reg tx_rst_done = 1'b0;
......@@ -598,11 +608,6 @@ gtxe2_chnl #(
.SATA_CPLL_CFG (SATA_CPLL_CFG),
.PMA_RSV3 (PMA_RSV3),
.TXOUT_DIV (TXOUT_DIV),
// .TXRATE (TXRATE),
.RXOUT_DIV (RXOUT_DIV),
// .RXRATE (RXRATE),
.TX_INT_DATAWIDTH (TX_INT_DATAWIDTH),
.TX_DATA_WIDTH (TX_DATA_WIDTH),
......@@ -624,8 +629,7 @@ gtxe2_chnl #(
.TX_INT_DATAWIDTH (TX_INT_DATAWIDTH),
.PTX8B10BEN (1),
.SATA_BURST_SEQ_LEN (SATA_BURST_SEQ_LEN),
.SATA_CPLL_CFG (SATA_CPLL_CFG)
.SATA_BURST_SEQ_LEN (SATA_BURST_SEQ_LEN)
)
channel(
.reset (reset),
......
gtxe2_channel/gtxe2_chnl.v
View file @ 9aabc22e
......@@ -18,9 +18,9 @@
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/> .
*******************************************************************************/
//`include "gtxe2_chnl_clocking.v"
//`include "gtxe2_chnl_tx.v"
//`include "gtxe2_chnl_rx.v"
`include "gtxe2_chnl_clocking.v"
`include "gtxe2_chnl_tx.v"
`include "gtxe2_chnl_rx.v"
module gtxe2_chnl(
input wire reset,
/*
......@@ -117,6 +117,7 @@ module gtxe2_chnl(
input wire [2:0] TXOUTCLKSEL,
input wire [2:0] RXOUTCLKSEL,
input wire TXDLYBYPASS,
input wire RXDLYBYPASS,
output wire GTREFCLKMONITOR,
input wire CPLLLOCKDETCLK,
......@@ -275,11 +276,6 @@ gtxe2_chnl_clocking #(
.SATA_CPLL_CFG (SATA_CPLL_CFG),
.PMA_RSV3 (PMA_RSV3),
.TXOUT_DIV (TXOUT_DIV),
// .TXRATE (TXRATE),
.RXOUT_DIV (RXOUT_DIV),
// .RXRATE (RXRATE),
.TX_INT_DATAWIDTH (TX_INT_DATAWIDTH),
.TX_DATA_WIDTH (TX_DATA_WIDTH),
.RX_INT_DATAWIDTH (RX_INT_DATAWIDTH),
......@@ -301,6 +297,7 @@ clocking(
.TXOUTCLKSEL (TXOUTCLKSEL),
.RXOUTCLKSEL (RXOUTCLKSEL),
.TXDLYBYPASS (TXDLYBYPASS),
.RXDLYBYPASS (RXDLYBYPASS),
.GTREFCLKMONITOR (GTREFCLKMONITOR),
.CPLLLOCKDETCLK (CPLLLOCKDETCLK),
......
gtxe2_channel/gtxe2_chnl_clocking.v
View file @ 9aabc22e
......@@ -19,10 +19,10 @@
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/> .
*******************************************************************************/
//`include "gtxe2_chnl_cpll_inmux.v"
//`include "gtxe2_chnl_outclk_mux.v"
//`include "gtxe2_chnl_cpll.v"
//`include "clock_divider.v"
`include "gtxe2_chnl_cpll_inmux.v"
`include "gtxe2_chnl_outclk_mux.v"
`include "gtxe2_chnl_cpll.v"
`include "clock_divider.v"
module gtxe2_chnl_clocking(
// top-level interfaces
input wire [2:0] CPLLREFCLKSEL,
......@@ -40,6 +40,7 @@ module gtxe2_chnl_clocking(
input wire [2:0] TXOUTCLKSEL,
input wire [2:0] RXOUTCLKSEL,
input wire TXDLYBYPASS,
input wire RXDLYBYPASS,
output wire GTREFCLKMONITOR,
input wire CPLLLOCKDETCLK,
......@@ -147,6 +148,7 @@ tx_toserialclk_div(
.div (tx_serial_divider)
);
wire rx_sipo_clk;
clock_divider #(
// .divide_by (rx_serial_divider),
.divide_by_param (0)
......
gtxe2_channel/gtxe2_chnl_cpll.v
View file @ 9aabc22e
......@@ -18,7 +18,7 @@
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/> .
*******************************************************************************/
//`include "gtxe2_chnl_cpll_def.v"
`include "gtxe2_chnl_cpll_def.v"
module gtxe2_chnl_cpll(
// top-level interfaces
input wire CPLLLOCKDETCLK,
......
gtxe2_channel/gtxe2_chnl_rx.v
View file @ 9aabc22e
......@@ -21,10 +21,11 @@
/**
* For now contains only deserializer, oob, 10x8 decoder, aligner and polarity invertor blocks
**/
//`include "gtxe2_chnl_rx_des.v"
//`include "gtxe2_chnl_rx_oob.v"
//`include "gtxe2_chnl_rx_10x8dec.v"
//`include "gtxe2_chnl_rx_align.v"
`include "gtxe2_chnl_rx_des.v"
`include "gtxe2_chnl_rx_oob.v"
`include "gtxe2_chnl_rx_10x8dec.v"
`include "gtxe2_chnl_rx_align.v"
`include "gtxe2_chnl_rx_dataiface.v"
module gtxe2_chnl_rx(
input wire reset,
input wire RXP,
......@@ -111,6 +112,7 @@ gtxe2_chnl_rx_oob #(
rx_oob(
.reset (reset),
.clk (serial_clk),
.usrclk2 (RXUSRCLK2),
.RXN (RXN),
.RXP (RXP),
......@@ -158,6 +160,8 @@ aligner(
.indata (parallel_data),
.outdata (aligned_data),
.rxelecidle (RXELECIDLE),
.RXBYTEISALIGNED (RXBYTEISALIGNED),
.RXBYTEREALIGN (RXBYTEREALIGN),
.RXCOMMADET (RXCOMMADET),
......@@ -167,6 +171,8 @@ aligner(
.RXMCOMMAALIGNEN (RXMCOMMAALIGNEN)
);
wire [data_width - 1:0] internal_data;
wire [isk_width - 1:0] internal_isk;
// 10x8 decoder
gtxe2_chnl_rx_10x8dec #(
.iwidth (internal_data_width),
......@@ -181,12 +187,41 @@ decoder_10x8(
.RX8B10BEN (RX8B10BEN),
.RXCHARISCOMMA (RXCHARISCOMMA),
.RXCHARISK (RXCHARISK),
.RXCHARISK (internal_isk),
.RXDISPERR (RXDISPERR),
.RXNOTINTABLE (RXNOTINTABLE),
.outdata (),
.RXDATA (RXDATA)
.RXDATA (internal_data)
);
// fit data width
// TODO make parameters awesome
localparam data_width = 16;
localparam if_data_width = 32;
localparam isk_width = 2;
localparam if_isk_width = 4;
gtxe2_chnl_rx_dataiface #(
.internal_data_width (data_width),
.interface_data_width (if_data_width),
.internal_isk_width (isk_width),
.interface_isk_width (if_isk_width)
)
dataiface
(
.usrclk (RXUSRCLK),
.usrclk2 (RXUSRCLK2),
.reset (reset),
.indata (internal_data),
.inisk (internal_isk),
.outdata (RXDATA[if_data_width - 1:0]),
.outisk (RXCHARISK[if_isk_width - 1:0]),
.realign (RXBYTEREALIGN === 1'bx ? 1'b0 : RXBYTEREALIGN)
);
assign RXDATA[63:if_data_width] = 0;
assign RXCHARISK[7:if_isk_width] = 0;
endmodule
gtxe2_channel/gtxe2_chnl_rx_align.v
View file @ 9aabc22e
......@@ -34,6 +34,8 @@ module gtxe2_chnl_rx_align #(
input wire [width - 1:0] indata,
output wire [width - 1:0] outdata,
input wire rxelecidle,
output wire RXBYTEISALIGNED,
output wire RXBYTEREALIGN,
output wire RXCOMMADET,
......@@ -57,6 +59,29 @@ always @ (posedge clk)
// finding matches
wire [comma_width - 1:0] comma_window [window_size - 1:0];
//initial
// for (idx = 0; idx < window_size; idx = idx + 1) $dumpvars(0, comma_width[idx]);
wire [comma_width - 1:0] comma_window0 = comma_window[0];
wire [comma_width - 1:0] comma_window1 = comma_window[1];
wire [comma_width - 1:0] comma_window2 = comma_window[2];
wire [comma_width - 1:0] comma_window3 = comma_window[3];
wire [comma_width - 1:0] comma_window4 = comma_window[4];
wire [comma_width - 1:0] comma_window5 = comma_window[5];
wire [comma_width - 1:0] comma_window6 = comma_window[6];
wire [comma_width - 1:0] comma_window7 = comma_window[7];
wire [comma_width - 1:0] comma_window8 = comma_window[8];
wire [comma_width - 1:0] comma_window9 = comma_window[9];
wire [comma_width - 1:0] comma_window10 = comma_window[10];
wire [comma_width - 1:0] comma_window11 = comma_window[11];
wire [comma_width - 1:0] comma_window12 = comma_window[12];
wire [comma_width - 1:0] comma_window13 = comma_window[13];
wire [comma_width - 1:0] comma_window14 = comma_window[14];
wire [comma_width - 1:0] comma_window15 = comma_window[15];
wire [comma_width - 1:0] comma_window16 = comma_window[16];
wire [comma_width - 1:0] comma_window17 = comma_window[17];
wire [comma_width - 1:0] comma_window18 = comma_window[18];
wire [comma_width - 1:0] comma_window19 = comma_window[19];
wire [window_size - 1:0] comma_match; // shows all matches
wire [window_size - 1:0] comma_pos; // shows the first match
wire [window_size - 1:0] pcomma_match;
......@@ -133,7 +158,7 @@ assign RXBYTEREALIGN = RXCOMMADETEN & is_aligned & pointer_set;
always @ (posedge clk)
begin
is_aligned <= rst ? 1'b0 : ~is_aligned & pointer_set | is_aligned;
is_aligned <= rst | pointer_set === 1'bx | rxelecidle ? 1'b0 : ~is_aligned & pointer_set | is_aligned;
pointer_latched <= rst ? 1'b0 : pointer_set ? pointer : pointer_latched;
end
......
gtxe2_channel/gtxe2_chnl_rx_dataiface.v 0 → 100644
View file @ 9aabc22e
/*******************************************************************************
* Module: gtxe2_chnl_rx_dataiface
* Date: 2015-07-06
* Author: Alexey
* Description: output data @ usrclk2 <- inner data @ usrclk, widths changes respectively
*
* Copyright (c) 2015 Elphel, Inc.
* gtxe2_chnl_rx_dataiface.v is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* gtxe2_chnl_rx_dataiface.v file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/> .
*******************************************************************************/
/*
* According to the doc, p110
* If RX_INT_DATAWIDTH, the inner width = 32 bits, otherwise 16.
*/
module gtxe2_chnl_rx_dataiface #(
parameter internal_data_width = 16,
parameter interface_data_width = 32,
parameter internal_isk_width = 2,
parameter interface_isk_width = 4
)
(
input wire usrclk,
input wire usrclk2,
input wire reset,
output wire [interface_data_width - 1:0] outdata,
output wire [interface_isk_width - 1:0] outisk,
input wire [internal_data_width - 1:0] indata,
input wire [internal_isk_width - 1:0] inisk,
input wire realign
);
localparam div = interface_data_width / internal_data_width;
localparam internal_total_width = internal_data_width + internal_isk_width;
localparam interface_total_width = interface_data_width + interface_isk_width;
reg [interface_data_width - 1:0] inbuffer_data;
reg [interface_isk_width - 1:0] inbuffer_isk;
reg [31:0] wordcounter;
wire empty_rd;
wire full_wr;
wire val_wr;
wire val_rd;
always @ (posedge usrclk)
wordcounter <= reset ? 32'h0 : realign & ~(div == 0) ? 31'b1 : wordcounter == (div - 1) ? 32'h0 : wordcounter + 1'b1;
genvar ii;
generate
for (ii = 0; ii < div; ii = ii + 1)
begin: splicing
always @ (posedge usrclk)
inbuffer_data[(ii + 1) * internal_data_width - 1 -: internal_data_width] <= reset ? {interface_data_width{1'b0}} : ((wordcounter == ii) | realign & (0 == ii)) ? indata : inbuffer_data[(ii + 1) * internal_data_width - 1 -: internal_data_width];
end
endgenerate
generate
for (ii = 0; ii < div; ii = ii + 1)
begin: splicing2
always @ (posedge usrclk)
inbuffer_isk[(ii + 1) * internal_isk_width - 1 -: internal_isk_width] <= reset ? {interface_isk_width{1'b0}} : ((wordcounter == ii) | realign & (0 == ii)) ? inisk : inbuffer_isk[(ii + 1) * internal_isk_width - 1 -: internal_isk_width];
end
endgenerate
assign val_rd = ~empty_rd & ~almost_empty_rd;
assign val_wr = ~full_wr & wordcounter == (div - 1);
always @ (posedge usrclk)
if (full_wr)
begin
$display("FIFO in %m is full, that is not an appropriate behaviour");
$finish;
end
wire [interface_total_width - 1:0] resync;
assign outdata = resync[interface_data_width - 1:0];
assign outisk = resync[interface_data_width + interface_isk_width - 1:interface_data_width];
resync_fifo_nonsynt #(
.width (interface_total_width),
.log_depth (3)
)
fifo(
.rst_rd (reset),
.rst_wr (reset),
.clk_wr (usrclk2),
.val_wr (val_wr),
.data_wr ({inisk, inbuffer_isk[interface_isk_width - internal_isk_width - 1 : 0], indata, inbuffer_data[interface_data_width - internal_data_width - 1 : 0]}),
.clk_rd (usrclk2),
.val_rd (val_rd),
.data_rd (resync),
.empty_rd (empty_rd),
.full_wr (full_wr),
.almost_empty_rd (almost_empty_rd)
);
endmodule
gtxe2_channel/gtxe2_chnl_rx_des.v
View file @ 9aabc22e
......@@ -18,7 +18,7 @@
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/> .
*******************************************************************************/
//`include "resync_fifo_nonsynt.v"
`include "resync_fifo_nonsynt.v"
module gtxe2_chnl_rx_des #(
parameter [31:0] width = 20
)
......
gtxe2_channel/gtxe2_chnl_rx_oob.v
View file @ 9aabc22e
......@@ -36,6 +36,7 @@ module gtxe2_chnl_rx_oob #(
(
input wire reset,
input wire clk,
input wire usrclk2,
input wire RXN,
input wire RXP,
......@@ -53,11 +54,11 @@ localparam wake_idle_min_len = 150;
localparam wake_idle_max_len = 340;
localparam init_idle_min_len = 450;
localparam init_idle_max_len = 990;
localparam wake_bursts_cnt = 5;
localparam init_bursts_cnt = 5;
localparam wake_bursts_cnt = SATA_BURST_VAL;
localparam init_bursts_cnt = SATA_BURST_VAL;
wire idle;
assign idle = (RXN == RXP) | (RXP === 1'bx);
assign idle = (RXN == RXP) | (RXP === 1'bx) | (RXP === 1'bz);
wire state_notrans;
wire state_error; //nostrans substate
......@@ -130,7 +131,23 @@ assign done_init = state_burst & ~idle & bursts_cnt == (init_bursts_cnt - 1)&
assign set_error = idle_len_violation | burst_len_violation;
assign set_done = ~set_error & (done_wake | done_init);
assign RXCOMINITDET = done_init;
assign RXCOMWAKEDET = done_wake;
// just to rxcominit(wake)det be synchronous to usrclk2
reg rxcominitdet_clk;
reg rxcominitdet_usrclk2;
reg rxcomwakedet_clk;
reg rxcomwakedet_usrclk2;
always @ (posedge clk)
begin
rxcominitdet_clk <= reset ? 1'b0 : done_init | rxcominitdet_clk & ~rxcominitdet_usrclk2;
rxcomwakedet_clk <= reset ? 1'b0 : done_wake | rxcomwakedet_clk & ~rxcomwakedet_usrclk2;
end
always @ (posedge usrclk2)
begin
rxcominitdet_usrclk2 <= reset ? 1'b0 : rxcominitdet_clk & ~rxcominitdet_usrclk2;
rxcomwakedet_usrclk2 <= reset ? 1'b0 : rxcomwakedet_clk & ~rxcomwakedet_usrclk2;
end
assign RXCOMINITDET = rxcominitdet_usrclk2;
assign RXCOMWAKEDET = rxcomwakedet_usrclk2;
assign RXELECIDLE = RXP === 1'bz ? 1'b1 : RXP === 1'bx ? 1'b1 : RXP == RXN;
endmodule
gtxe2_channel/gtxe2_chnl_tx.v
View file @ 9aabc22e
......@@ -19,9 +19,10 @@
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/> .
*******************************************************************************/
//`include "gtxe2_chnl_tx_ser.v"
//`include "gtxe2_chnl_tx_8x10enc.v"
//`include "gtxe2_chnl_tx_oob.v"
`include "gtxe2_chnl_tx_ser.v"
`include "gtxe2_chnl_tx_8x10enc.v"
`include "gtxe2_chnl_tx_oob.v"
`include "gtxe2_chnl_tx_dataiface.v"
module gtxe2_chnl_tx(
input wire reset,
output wire TXP,
......@@ -97,12 +98,15 @@ wire line_idle;
wire line_idle_pcs; // line_idle in pcs clock domain
wire [internal_data_width - 1:0] ser_input;
wire oob_active;
reg oob_in_process;
always @ (posedge TXUSRCLK)
oob_in_process <= reset | TXCOMFINISH ? 1'b0 : TXCOMINIT | TXCOMWAKE ? 1'b1 : oob_in_process;
assign TXP = ~line_idle ? serial_data : 1'bx;
assign TXN = ~line_idle ? ~serial_data : 1'bx;
assign line_idle_pcs = TXELECIDLE & ~oob_active | reset;
assign line_idle_pcs = (TXELECIDLE | oob_in_process) & ~oob_active | reset;
// Serializer
wire [internal_data_width - 1:0] parallel_data;
......@@ -123,6 +127,35 @@ ser(
// TX PCS
// fit data width
// TODO make parameters awesome
localparam data_width = 16;
localparam if_data_width = 32;
localparam isk_width = 2;
localparam if_isk_width = 4;
wire [data_width - 1:0] internal_data;
wire [isk_width - 1:0] internal_isk;
gtxe2_chnl_tx_dataiface #(
.internal_data_width (data_width),
.interface_data_width (if_data_width),
.internal_isk_width (isk_width),
.interface_isk_width (if_isk_width)
)
dataiface
(
.usrclk (TXUSRCLK),
.usrclk2 (TXUSRCLK2),
.reset (reset),
.outdata (internal_data),
.outisk (internal_isk),
.indata (TXDATA[if_data_width - 1:0]),
.inisk (TXCHARISK[if_isk_width - 1:0])
);
wire [internal_data_width - 1:0] polarized_data;
// invert data (get words as [abdceifghj] after 8/10, each word shall be transmitter in a reverse bit order)
genvar ii;
genvar jj;
......@@ -137,7 +170,6 @@ generate
endgenerate
// Polarity:
wire [internal_data_width - 1:0] polarized_data;
assign ser_input = polarized_data;
generate
......@@ -155,7 +187,9 @@ wire oob_val;
assign oob_active = oob_val;
gtxe2_chnl_tx_oob #(
.width (internal_data_width)
.width (internal_data_width),
.SATA_BURST_SEQ_LEN (SATA_BURST_SEQ_LEN),
.SATA_CPLL_CFG (SATA_CPLL_CFG)
)
tx_oob(
.TXCOMINIT (TXCOMINIT),
......@@ -185,9 +219,9 @@ encoder_8x10(
.TX8B10BEN (TX8B10BEN),
.TXCHARDISPMODE (TXCHARDISPMODE),
.TXCHARDISPVAL (TXCHARDISPVAL),
.TXCHARISK (TXCHARISK),
.TXCHARISK (internal_isk),
.disparity (disparity),
.data_in (TXDATA[15:0]),
.data_in (internal_data),
.data_out (encoded_data),
.next_disparity (next_disparity)
);
......
gtxe2_channel/gtxe2_chnl_tx_8x10enc.v
View file @ 9aabc22e
......@@ -43,7 +43,7 @@ wire [word_count - 1:0] word_disparity;
wire [word_count - 1:0] interm_disparity;
wire [5:0] six [word_count - 1:0];
wire [3:0] four [word_count - 1:0];
wire [owidth - 1:0] oword [word_count - 1:0];
wire [9:0] oword [word_count - 1:0];
wire [iwidth - 1:0] iword [word_count - 1:0];
wire [word_count - 1:0] is_control;
......@@ -58,7 +58,7 @@ begin: encode_by_word
assign iword[ii] = data_in[ii*8 + 7:ii*8];
assign interm_disparity[ii]= ^six[ii] ? word_disparity[ii] : ~word_disparity[ii];
assign word_disparity[ii] = (ii == 0) ? disparity :
(^oword[ii - 1] ? ~word_disparity[ii - 1] : word_disparity[ii - 1]);
(^oword[ii - 1] ? word_disparity[ii - 1] : ~word_disparity[ii - 1]); // if there're 5 '1's - do no change the disparity, 6 or 4 - change
assign six[ii] = iword[ii][4:0] == 5'b00000 ? (~word_disparity[ii] ? 6'b100111 : 6'b011000)
: iword[ii][4:0] == 5'b00001 ? (~word_disparity[ii] ? 6'b011101 : 6'b100010)
: iword[ii][4:0] == 5'b00010 ? (~word_disparity[ii] ? 6'b101101 : 6'b010010)
......@@ -98,7 +98,7 @@ begin: encode_by_word
: iword[ii][7:5] == 3'd4 ? (~interm_disparity[ii] ? 4'b1101 : 4'b0010)
: iword[ii][7:5] == 3'd5 ? (~interm_disparity[ii] ? 4'b1010 : 4'b1010)
: iword[ii][7:5] == 3'd6 ? (~interm_disparity[ii] ? 4'b0110 : 4'b0110)
:/*iword[ii][7:5] == 3'd7*/(~interm_disparity[ii] ? (six[ii][1:0] == 2'b00 ? 4'b1110 : 4'b0111)
:/*iword[ii][7:5] == 3'd7*/(~interm_disparity[ii] ? (six[ii][1:0] == 2'b11 ? 4'b0111 : 4'b1110)
: (six[ii][1:0] == 2'b00 ? 4'b1000 : 4'b0001));
assign oword[ii] = ~is_control[ii] ? {six[ii], four[ii]}
: iword[ii][7:0] == 8'b00011100 ? (~word_disparity[ii] ? 10'b0011110100 : 10'b1100001011)
......@@ -117,6 +117,6 @@ begin: encode_by_word
assign data_out[ii*10 + 9:ii * 10] = oword[ii];
end
endgenerate
assign next_disparity = ^oword[word_count - 1] ? ~word_disparity[word_count - 1] : word_disparity[word_count - 1];
assign next_disparity = ^oword[word_count - 1] ? word_disparity[word_count - 1] : ~word_disparity[word_count - 1];
endmodule
gtxe2_channel/gtxe2_chnl_tx_dataiface.v 0 → 100644
View file @ 9aabc22e
/*******************************************************************************
* Module: gtxe2_chnl_tx_dataiface
* Date: 2015-07-06
* Author: Alexey
* Description: input data @ usrclk2 -> inner data @ usrclk, widths changes respectively
*
* Copyright (c) 2015 Elphel, Inc.
* gtxe2_chnl_tx_dataiface.v is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* gtxe2_chnl_tx_dataiface.v file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/> .
*******************************************************************************/
/*
* According to the doc, p110
* If TX_INT_DATAWIDTH, the inner width = 32 bits, otherwise 16.
*/
module gtxe2_chnl_tx_dataiface #(
parameter internal_data_width = 16,
parameter interface_data_width = 32,
parameter internal_isk_width = 2,
parameter interface_isk_width = 4
)
(
input wire usrclk,
input wire usrclk2,
input wire reset,
output wire [internal_data_width - 1:0] outdata,
output wire [internal_isk_width - 1:0] outisk,
input wire [interface_data_width - 1:0] indata,
input wire [interface_isk_width - 1:0] inisk
);
localparam div = interface_data_width / internal_data_width;
wire [interface_data_width + interface_isk_width - 1:0] data_resynced;
reg [31:0] wordcounter;
wire almost_empty_rd;
wire empty_rd;
wire full_wr;
wire val_rd;
always @ (posedge usrclk)
wordcounter <= reset | wordcounter == (div - 1) ? 32'h0 : wordcounter + 1'b1;
assign outdata = data_resynced[(wordcounter + 1) * internal_data_width - 1 -: internal_data_width];
assign outisk = data_resynced[(wordcounter + 1) * internal_isk_width + internal_data_width * div - 1 -: internal_isk_width];
assign val_rd = ~almost_empty_rd & ~empty_rd & wordcounter == (div - 1);
resync_fifo_nonsynt #(
.width (interface_data_width + interface_isk_width),
.log_depth (3)
)
fifo(
.rst_rd (reset),
.rst_wr (reset),
.clk_wr (usrclk2),
.val_wr (1'b1),
.data_wr ({inisk, indata}),
.clk_rd (usrclk),
.val_rd (val_rd),
.data_rd ({data_resynced}),
.empty_rd (empty_rd),
.full_wr (full_wr),
.almost_empty_rd (almost_empty_rd)
);
endmodule
gtxe2_channel/gtxe2_chnl_tx_oob.v
View file @ 9aabc22e
......@@ -37,10 +37,10 @@ module gtxe2_chnl_tx_oob #(
parameter [3:0] SATA_BURST_SEQ_LEN = 4'b0101;
parameter SATA_CPLL_CFG = "VCO_3000MHZ";
localparam burst_len_mult = SATA_CPLL_CFG == "VCO_3000MHZ" ? 4
: SATA_CPLL_CFG == "VCO_1500MHZ" ? 2
: /* VCO_750MHZ */ 1;
localparam burst_len = burst_len_mult * 8; // = 106.7ns; each burst contains 16 SATA Gen1 words
localparam burst_len_mult = SATA_CPLL_CFG == "VCO_3000MHZ" ? 2 // assuming each usrclk cycle == 20 sata serial clk cycles
: SATA_CPLL_CFG == "VCO_1500MHZ" ? 4
: /* VCO_6000MHZ */ 1;
localparam burst_len = /*burst_len_mult * 8*/ 32; // = 106.7ns; each burst contains 16 SATA Gen1 words
localparam quiet_len_init = burst_len * 3; // = 320ns
localparam quiet_len_wake = burst_len; // = 106.7ns
localparam init_bursts_cnt = SATA_BURST_SEQ_LEN;//3;
......@@ -88,8 +88,8 @@ end
assign set_burst = state_idle & (TXCOMINIT | TXCOMWAKE) | state_quiet & clr_quiet & ~TXCOMFINISH;
assign set_quiet = state_burst & (bursts_cnt < bursts_cnt_togo - 1) & clr_burst;
assign clr_burst = state_burst & stopwatch == burst_len;
assign clr_quiet = state_quiet & stopwatch == quiet_len;
assign clr_burst = state_burst & stopwatch == (burst_len - burst_len_mult);
assign clr_quiet = state_quiet & stopwatch == (quiet_len - burst_len_mult);
// bursts timing
assign quiet_len = issued_wake ? quiet_len_wake : quiet_len_init;
......
gtxe2_channel/gtxe2_chnl_tx_ser.v
View file @ 9aabc22e
......@@ -18,7 +18,7 @@
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/> .
*******************************************************************************/
//`include "resync_fifo_nonsynt.v"
`include "resync_fifo_nonsynt.v"
module gtxe2_chnl_tx_ser #(
parameter [31:0] width = 20
)
......
tb/tb.v
View file @ 9aabc22e
......@@ -19,8 +19,8 @@
* along with this program. If not, see <http://www.gnu.org/licenses/> .
*******************************************************************************/
`timescale 1ps/1ps
//`include "GTXE2_CHANNEL.v"
//`include "test.v"
`include "GTXE2_CHANNEL.v"
`include "test.v"
module tb();
wire reset;
wire TXP;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment